MIB Viewer
MIB Viewer Desktop New

INFINERA-TP-OTUCLIENTCTP-MIB

61 objects
No module-level DESCRIPTION found.
OIDNameAccessStatusDescription
1.3.6.1.4.1.21296.2.2.2.2.25IdentityotuClientCtpMIB
1.3.6.1.4.1.21296.2.2.2.2.25.1TableotuClientCtpTablenot-accessiblecurrentA list of OtuClientCtp entries. Each entry is uniquely identified by the value of ifIndex.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1RowotuClientCtpEntrynot-accessiblecurrentA OtuClientCtp entry containing information pertaining to Infinera OtuClientCtp interfaces. Entries will exist in this table for interfaces of type otuclientCt…
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.1ColumnotuClientCtpFacPrbsGenModeread-writecurrentThis atTermute is used to enable or disable the generation of a PRBS test pattern toward the Facility side (e.g., toward the client interface).
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.2ColumnotuClientCtpFacPrbsMonModeread-writecurrentThis atTermute is used to enable or disable the monitoring of a PRBS test pattern coming from the Facility side (e.g., from the client interface).
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.3ColumnotuClientCtpServiceModeread-onlycurrent'None� is the default value indicated for the OTU client CTP when it is initially created. OTUk alarms, loopbacks/diagnostics, PMs, etc. are intended to be s…
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.4ColumnotuClientCtpServiceModeQualifierread-onlycurrentThe Service Mode Qualifier (SMQ) of the ODU client CTP (i.e., the mode/type of service in which this ODU client CTP is being used,). None� is the default val…
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.5ColumnotuClientCtpFecCorrectionread-writecurrentThis atTermute is used to enable or disable the FEC correction at the ingress of the OTU client facility. When Disabled, the FEC statistics are still provided.…
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.6ColumnotuClientCtpFecEnabledread-writecurrentThis atTermute is used to enable or disable the G.709 Fec Generation and handling on the OTU Term interface. If the FECEnabled is FALSE, all zeroes are inserte…
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.7ColumnotuClientCtpTermTxTTIread-writecurrentThe TTI message that needs to be transmitted in the Terminal direction (e.g., from Trib to Line direction).
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.8ColumnotuClientCtpTermExpectedSAPIread-writecurrentThe Source Access Point Identifier that is expected from the Terminal side (e.g., in the Line to Trib direction).
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.9ColumnotuClientCtpTermExpectedDAPIread-writecurrentThe Destination Access Point Identifier that is expected from the Terminal side (e.g., in the Line to Trib direction).
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.10ColumnotuClientCtpFacTxTTIread-writecurrentThe TTI message that needs to be transmitted in the Facility direction (e.g., from Line to Trib direction).
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.11ColumnotuClientCtpFacExpectedSAPIread-writecurrentThe Source Access Point Identifier that is expected from the Facility side (e.g., Trib to Line direction).
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.12ColumnotuClientCtpFacExpectedDAPIread-writecurrentThe Destination Access Point Identifier that is expected from the Facility side (e.g., Trib to Line direction)
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.13ColumnotuClientCtpTermReceivedTTIread-onlycurrentThe TTI message received from the Terminal side (e.g., in the Line to Trib direction) of an OTU Trib Interface.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.14ColumnotuClientCtpFacReceivedTTIread-onlycurrentThe TTI message received from the Facility side (e.g., in the Trib to Line direction) of an OTU Trib Interface.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.15ColumnotuClientCtpRxEb15MinutesTceread-writecurrentNumber of ErrorBlock in receive direction during 15 minutes interval.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.16ColumnotuClientCtpTxEb15MinutesTceread-writecurrentNumber of ErrorBlock in transmit direction during 15 minutes interval.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.17ColumnotuClientCtpRxEbDayTceread-writecurrentNumber of ErrorBlock in receive direction during 24 hours interval.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.18ColumnotuClientCtpTxEbDayTceread-writecurrentNumber of ErrorBlock in transmit direction during 24 hours interval.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.19ColumnotuClientCtpRxDs15MinutesTceread-writecurrentNumber of Defect Seconds in receive direction during 15 minutes interval.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.20ColumnotuClientCtpTxDs15MinutesTceread-writecurrentNumber of Defect Seconds in transmit direction during 15 minutes interval.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.21ColumnotuClientCtpRxDsDayTceread-writecurrentNumber of Defect Seconds in receive direction during 24 hours interval.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.22ColumnotuClientCtpTxDsDayTceread-writecurrentNumber of Defect Seconds in transmit direction during 24 hours interval.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.23ColumnotuClientCtpRxEbDayTceReportingread-writecurrentFlag that enables/disables the reporting of RxEbDayTce threshold crossing.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.24ColumnotuClientCtpRxEb15MinutesTceReportingread-writecurrentFlag that enables/disables the reporting of RxEb15MinutesTce threshold crossing.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.25ColumnotuClientCtpTxEbDayTceReportingread-writecurrentFlag that enables/disables the reporting of TxEbDayTce threshold crossing.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.26ColumnotuClientCtpTxEb15MinutesTceReportingread-writecurrentFlag that enables/disables the reporting of TxEb15MinutesTce threshold crossing.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.27ColumnotuClientCtpRxDsDayTceReportingread-writecurrentFlag that enables/disables the reporting of RxDsDayTce threshold crossing.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.28ColumnotuClientCtpRxDs15MinutesTceReportingread-writecurrentFlag that enables/disables the reporting of RxDs15MinutesTce threshold crossing.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.29ColumnotuClientCtpTxDsDayTceReportingread-writecurrentFlag that enables/disables the reporting of RxDsDayTce threshold crossing.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.30ColumnotuClientCtpTxDs15MinutesTceReportingread-writecurrentFlag that enables/disables the reporting of RxDs15MinutesTce threshold crossing.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.31ColumnotuClientCtpTermTimDetModeread-writecurrentThis atTermute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected and Received TTI message. The following are the values and the…
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.32ColumnotuClientCtpFacTimDetModeread-writecurrentThis atTermute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected and Received TTI message. The following are the values and the…
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.33ColumnotuClientCtpConfiguredServiceTyperead-onlycurrentThe OTU Service type that is configured on this generic OtuClientCtp managed object. Note TL1 commands (ED-OTUk and RTRV-OTUk) shall support individual seconda…
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.34ColumnotuClientCtpTamTyperead-onlyobsoleteThe equipment type where this OTU client is residing.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.35ColumnotuClientCtpLoopbackread-writecurrentThe Type of Loopback that is provisioned on this ODU Client interface.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.36ColumnotuClientCtpFacPmHistStatsEnableread-writecurrentFlag to enable or disable the collection of PMs on the Facility side of OTU Clients.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.37ColumnotuClientCtpTermPmHistStatsEnableread-writecurrentFlag to enable or disable the collection of PMs on the Terminal side of OTU Clients.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.38ColumnotuClientCtpAlarmReportControlread-writecurrentThe Alarm Reporting Control Flag for the OTU Clients. .
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.39ColumnotuClientCtpSupportingCircuitIdListread-onlycurrentThe Supporting Circuit ID List that is this client is using.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.40ColumnotuClientCtpFacDSThresholdread-writecurrentThis attribute indicates the Facility-side (e.g., Trib-side) threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is decla…
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.41ColumnotuClientCtpTermDSThresholdread-writecurrentThis attribute indicates the Terminal-side (e.g., Line-side) threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is decla…
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.42ColumnotuClientCtpTermPrbsGenModeread-writecurrentThis attribute is used to enable or disable the generation of a PRBS test pattern toward the Terminal side (e.g., toward the line interface).System should disa…
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.43ColumnotuClientCtpTermPrbsMonModeread-writecurrentThis attribute is used to enable or disable the monitoring of a PRBS test pattern coming from the Terminal side (e.g., from the Line interface). Applicable to:…
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.44ColumnotuClientCtpFacMonitoringModeread-writecurrentAllowed Section Monitoring / Path Monitoring / TCM Attribute Value(s) (For side corresponding to MonitoringMode) (Fac-Side/Term-Side).
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.45ColumnotuClientCtpTermMonitoringModeread-writecurrentAllowed Section Monitoring / Path Monitoring / TCM Attribute Value(s) (For side corresponding to MonitoringMode) (Fac-Side/Term-Side).
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.46ColumnotuClientCtpRxBei15MinutesTceread-writecurrentNumber of Error Block in received direction during 15 minutes interval.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.47ColumnotuClientCtpTxBei15MinutesTceread-writecurrentNumber of Error Block in transmitted direction during 15 minutes interval.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.48ColumnotuClientCtpRxBeiDayTceread-writecurrentNumber of Error Block in received direction during 24 hours interval.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.49ColumnotuClientCtpTxBeiDayTceread-writecurrentNumber of Error Block in transmitted direction during 24 hours interval.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.50ColumnotuClientCtpRxBeiDayTceReportingread-writecurrentFlag that enables/disables the reporting of RxEbDayTce threshold crossing.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.51ColumnotuClientCtpRxBei15MinutesTceReportingread-writecurrentFlag that enables/disables the reporting of RxEb15MinutesTce threshold crossing.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.52ColumnotuClientCtpTxBeiDayTceReportingread-writecurrentFlag that enables/disables the reporting of TxEbDayTce threshold crossing.
1.3.6.1.4.1.21296.2.2.2.2.25.1.1.53ColumnotuClientCtpTxBei15MinutesTceReportingread-writecurrentFlag that enables/disables the reporting of TxEb15MinutesTce threshold crossing.
1.3.6.1.4.1.21296.2.2.2.2.25.3NodeotuClientCtpConformance
1.3.6.1.4.1.21296.2.2.2.2.25.3.1NodeotuClientCtpCompliances
1.3.6.1.4.1.21296.2.2.2.2.25.3.1.1ComplianceotuClientCtpCompliancecurrentDescribes the requirements for conformance to the OTUCLIENTCTP-MIB
1.3.6.1.4.1.21296.2.2.2.2.25.3.2NodeotuClientCtpGroups
1.3.6.1.4.1.21296.2.2.2.2.25.3.2.1GroupotuClientCtpGroupcurrentA collection of objects for managing the otuClientCtp