MIB Viewer

INNOMINATE-LLDP-MIB

21 objects
This MIB contains the proprietary extensions to the LLDP standard.
Imported Objects
IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbers
RFC1155-SMIenterprises
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCTEXTUAL-CONVENTION TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.15450.3.7IdentityinnominateLldpMIBThis MIB contains the proprietary extensions to the LLDP standard.
1.3.6.1.4.1.15450.3.7.1NodeinnominateLLDPConfig
1.3.6.1.4.1.15450.3.7.1.1ScalarinnominateLLDPAdminStatusread-writecurrentDURABLE: Enables/disables the IEEE802.1AB functionality on this device. If disabled(2), the LLDP protocol is inactive, but the LLDP MIBs can be accessed.
1.3.6.1.4.1.15450.3.7.1.2TableinnominateLLDPInterfaceTablenot-accessiblecurrentThis table contains variables for each interface of the switch.
1.3.6.1.4.1.15450.3.7.1.2.1RowinnominateLLDPIfEntrynot-accessiblecurrent
1.3.6.1.4.1.15450.3.7.1.2.1.1ColumninnominateLLDPIfaceGroupIDread-onlycurrentIndex to identify an interface card. This value is never greater than innominateSysGroupCapacity.
1.3.6.1.4.1.15450.3.7.1.2.1.2ColumninnominateLLDPIfaceIDread-onlycurrentIndex to identify an interface within an interface card.
1.3.6.1.4.1.15450.3.7.1.2.1.3ColumninnominateLLDPIfaceHirmaModeread-writecurrentConfigure Hirschmann LLDP on this physical port. If an IEEE802.1AB capable device not manufactured by Hirschmann is connected to a port, innominateLLDPIfaceHir…
1.3.6.1.4.1.15450.3.7.1.2.1.4ColumninnominateLLDPIfaceFDBModeread-writecurrentIf configured to lldpOnly(1), only received LLDP messages will be used to populate the LLDP-MIB's remTable. If configured to macOnly(2), learned mac addresses …
1.3.6.1.4.1.15450.3.7.1.2.1.5ColumninnominateLLDPIfaceMaxNeighborsread-writecurrentConfigure Hirschmann LLDP on this physical port. This value limits the number of entries in the remTable for this port.
1.3.6.1.4.1.15450.3.7.2NodeinnominateLLDPStatistics
1.3.6.1.4.1.15450.3.7.2.1TableinnominateLLDPStatsIfTablenot-accessiblecurrentThis table contains variables for each interface of the switch.
1.3.6.1.4.1.15450.3.7.2.1.1RowinnominateLLDPStatsIfEntrynot-accessiblecurrent
1.3.6.1.4.1.15450.3.7.2.1.1.1ColumninnominateLLDPStatsIfaceGroupIDread-onlycurrentIndex to identify an interface card. This value is never greater than innominateSysGroupCapacity.
1.3.6.1.4.1.15450.3.7.2.1.1.2ColumninnominateLLDPStatsIfaceIDread-onlycurrentIndex to identify an interface within an interface card.
1.3.6.1.4.1.15450.3.7.2.1.1.3ColumninnominateLLDPStatsIfaceTotalFDBEntryCountread-onlycurrentThe total number of learned entries in the forwarding database (FDB) for this port.
1.3.6.1.4.1.15450.3.7.2.1.1.4ColumninnominateLLDPStatsIfaceTotalEntryCountread-onlycurrentThe total number of remote connections in the LLDP MIB's remTable for this port.
1.3.6.1.4.1.15450.3.7.2.1.1.5ColumninnominateLLDPStatsIfaceIEEEEntryCountread-onlycurrentThe number of remote connections in the LLDP MIB's remTable for this port that were detected because an LLDP message from an IEEE source was received.
1.3.6.1.4.1.15450.3.7.2.1.1.6ColumninnominateLLDPStatsIfaceHirmaEntryCountread-onlycurrentThe number of remote connections in the LLDP MIB's remTable for this port that were detected because an LLDP message from an Hirschmann source was received.
1.3.6.1.4.1.15450.3.7.2.1.1.7ColumninnominateLLDPStatsIfaceFDBEntryCountread-onlycurrentThe number of remote connections in the LLDP MIB's remTable for this port that were detected in the forwarding database (FDB) for this port.
Type Definitions
NameSyntaxStatusDescription
TimeFilterTimeTickscurrent