INTELCORPORATIONBASEBOARDMAPPER-MIB
638 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | NOTIFICATION-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.343 | Nodeintel | |||
| 1.3.6.1.4.1.343.2 | Nodeproducts | |||
| 1.3.6.1.4.1.343.2.10 | Nodeserver-management | |||
| 1.3.6.1.4.1.343.2.10.7 | NodedmtfGroups | |||
| 1.3.6.1.4.1.343.2.10.7.2 | TabletSystemControl | not-accessible | mandatory | Status and control of global system control features. |
| 1.3.6.1.4.1.343.2.10.7.2.1 | RoweSystemControl | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.10.7.2.1.1 | Columna1004Selfid | read-only | mandatory | A unique number that identifies this row. |
| 1.3.6.1.4.1.343.2.10.7.2.1.2 | Columna1004ResetSystem | read-write | mandatory | Writing to this attribute with a properly authenticated challenge hash string initiates an immediate system hard reset. Reading this value is undefined. |
| 1.3.6.1.4.1.343.2.10.7.2.1.3 | Columna1004TimedResetIncrement | read-only | mandatory | This attribute contains the increments in which a timed reset can be set, in microseconds. |
| 1.3.6.1.4.1.343.2.10.7.2.1.4 | Columna1004TimedResetResolution | read-only | mandatory | This attribute contains the resolution to which a Timed Reset can be set, in microseconds. For example, a resolution of 1 second and an increment of 10 seconds… |
| 1.3.6.1.4.1.343.2.10.7.2.1.5 | Columna1004TimeUntilSystemReset | read-write | mandatory | This attribute contains the interval for timed resets, in units of the Timed Reset Increment attribute. Writing a non-zero value, and setting the Timed Reset E… |
| 1.3.6.1.4.1.343.2.10.7.2.1.6 | Columna1004SystemPowerCapabilities | read-only | mandatory | This attribute describes the system power control capabilities. It can have one of the following values: Unknown, On And Off, Off Only, or On Only. |
| 1.3.6.1.4.1.343.2.10.7.2.1.7 | Columna1004SystemPowerStatus | read-only | mandatory | This attribute provides access to the status of system power. Its value is either On or Off. |
| 1.3.6.1.4.1.343.2.10.7.2.1.8 | Columna1004EventLoggingCapability | read-only | mandatory | This attribute describes the Event Logging Capabilities. The attribute value can be : Unknown, Unsupported, Active, or Inactive. If the Event logging capabilit… |
| 1.3.6.1.4.1.343.2.10.7.2.1.9 | Columna1004WatchdogTimerIncrement | read-only | mandatory | This attribute contains the increments in which a watchdog update interval can be set. This value is maintained internally by instrumentat on code in microseco… |
| 1.3.6.1.4.1.343.2.10.7.2.1.10 | Columna1004WatchdogTimerResolution | read-only | mandatory | Resolution to which a watchdog update interval can be set. For example, a watchdog timer resolution of R microsecond and an watchdog timer increment of I micro… |
| 1.3.6.1.4.1.343.2.10.7.2.1.11 | Columna1004WatchdogUpdateInterval | read-write | mandatory | This attribute specifies the Interval for watchdog resets, in minutes. If the system software does not update the watchdog timer within this interval, a hard r… |
| 1.3.6.1.4.1.343.2.10.7.2.1.12 | Columna1004UseSystemWatchdogFeature | read-write | mandatory | If this value is On, then the Watchdog feature is enabled and the Watchdog Update Interval value is valid. If enabled this feature automatically resets the ser… |
| 1.3.6.1.4.1.343.2.10.7.2.1.13 | Columna1004ResetSystemAfterDelay | read-write | mandatory | Writing to this attribute with a properly authenticated challenge hash string will initiate a timed reset, the reset will occur when the Timed Reset Interval e… |
| 1.3.6.1.4.1.343.2.10.7.2.1.15 | Columna1004SavePersistentData | read-write | mandatory | When this attribute value is set to ON all the persistent data like thresholds are stored into the persistent data Table. |
| 1.3.6.1.4.1.343.2.10.7.2.1.16 | Columna1004RestoreFactoryDefaults | read-write | mandatory | Writing to this attribute with a properly authenticated challenge hash string will cause all the Factory default thresholds to be restored. Reading this attrib… |
| 1.3.6.1.4.1.343.2.10.7.2.1.17 | Columna1004ShutdownOs | read-write | mandatory | Writing to this attribute with a properly authenticated challenge hash string will initiate an immediate OS shutdown Reading this attribute will have undefined… |
| 1.3.6.1.4.1.343.2.10.7.2.1.18 | Columna1004ShutdownOsAndPowerOff | read-write | mandatory | Writing to this attribute with a properly authenticated challenge hash string will initiate an immediate OS shutdown and power off of the system. Reading this … |
| 1.3.6.1.4.1.343.2.10.7.2.1.19 | Columna1004ShutdownOsAndHardwareReset | read-write | mandatory | Writing to this attribute with a properly authenticated challenge hash string will initiate an immediate OS shutdown and hardware reset of the system. Reading … |
| 1.3.6.1.4.1.343.2.10.7.2.1.20 | Columna1004IssueAHardwareNmi | read-write | mandatory | Writing to this attribute with a properly authenticated challenge hash string will initiate an immediate hardware NMI. Reading this attribute will have undefin… |
| 1.3.6.1.4.1.343.2.10.7.2.1.21 | Columna1004ImmediatePowerDown | read-write | mandatory | Writing to this attribute with a properly authenticated challenge hash string initiates an immediate power off the system. Reading this value is undefined. |
| 1.3.6.1.4.1.343.2.10.7.2.1.22 | Columna1004Challenge | read-only | mandatory | Reading this value will return a challenge string that may be hashed with the firmware (DPC) password and then written to any of the authenticated attributes t… |
| 1.3.6.1.4.1.343.2.10.7.2.1.23 | Columna1004VerifyPrivilege | read-write | mandatory | Writing to this attribute with a properly authenticated challenge hash string will result in a successful write operation. Reading this value is undefined. |
| 1.3.6.1.4.1.343.2.10.7.3 | TabletCoolingSensors | not-accessible | mandatory | This table contains one row for each cooling fan in the system. Each row contains the status and control information for a single fan. |
| 1.3.6.1.4.1.343.2.10.7.3.0 | NodetCoolingSensorsTraps | |||
| 1.3.6.1.4.1.343.2.10.7.3.0.256 | Notificationnotification1ForCoolingSensors | current | Cooling Device Failure | |
| 1.3.6.1.4.1.343.2.10.7.3.0.257 | Notificationnotification2ForCoolingSensors | current | Cooling Device OK | |
| 1.3.6.1.4.1.343.2.10.7.3.1 | RoweCoolingSensors | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.10.7.3.1.1 | Columna1005Selfid | read-only | mandatory | A unique number that identifies this row. |
| 1.3.6.1.4.1.343.2.10.7.3.1.2 | Columna1005FruGroupIndex | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, thisprovides an index into the FRU table; 'value = -1' indicates that the group is not a F… |
| 1.3.6.1.4.1.343.2.10.7.3.1.3 | Columna1005OperationalGroupIndex | read-only | mandatory | The index into the Operational State table for this device. |
| 1.3.6.1.4.1.343.2.10.7.3.1.6 | Columna1005CoolingDeviceType | read-only | mandatory | This attribute describes the fan type. It has one of the following values: Muffin, Axial, Piezo, or Squirrel Cage. |
| 1.3.6.1.4.1.343.2.10.7.3.1.7 | Columna1005CfmRating | read-only | mandatory | This attribute presents the maximum CFM rating of this fan. |
| 1.3.6.1.4.1.343.2.10.7.3.1.8 | Columna1005FanUnits | read-only | mandatory | This attribute describes the units of fan status measurement. It has one of the following values: RPM, CFM, or OK/Fatal. |
| 1.3.6.1.4.1.343.2.10.7.3.1.9 | Columna1005MaximumReading | read-only | mandatory | This attribute contains the highest reading supported on this fan's sensor, measured in the units specified by the Fan Units attribute. This attribute may not … |
| 1.3.6.1.4.1.343.2.10.7.3.1.10 | Columna1005MinimumReading | read-only | mandatory | This attribute contains the lowest reading supported on this fan's sensor, measured in the units specified Fan Units attribute. This attribute may not apply to… |
| 1.3.6.1.4.1.343.2.10.7.3.1.11 | Columna1005CurrentReading | read-only | mandatory | This attribute contains the current fan sensor reading, measured in the units specified by the Fan Units attribute. This attribute will display as Unsupported … |
| 1.3.6.1.4.1.343.2.10.7.3.1.13 | Columna1005SensorAccuracy | read-write | mandatory | This attribute describes the sensor's accuracy in +/- hundredth of a percent. |
| 1.3.6.1.4.1.343.2.10.7.3.1.14 | Columna1005SensorTolerancePlus | read-write | mandatory | This attribute describes the sensor's '+' tolerance in the units specified by the Fan Units attribute. |
| 1.3.6.1.4.1.343.2.10.7.3.1.15 | Columna1005SensorToleranceMinus | read-write | mandatory | This attribute describes the sensor's '-' tolerance in the units specified by the Fan Units attribute. |
| 1.3.6.1.4.1.343.2.10.7.3.1.16 | Columna1005Non-criticalThreshold | read-write | mandatory | This attribute contains the warning threshold level for the fan. The threshold is given in the units specified by the Fan Units attribute. |
| 1.3.6.1.4.1.343.2.10.7.3.1.17 | Columna1005CriticalThreshold | read-write | mandatory | This attribute contains the major error threshold level for the fan. The threshold is given in the units specified by the Fan Units attribute. |
| 1.3.6.1.4.1.343.2.10.7.3.1.18 | Columna1005Non-recoverableThreshold | read-write | mandatory | This attribute contains the fatal error threshold level for the fan. The threshold is given in the units specified by the Fan Units attribute. |
| 1.3.6.1.4.1.343.2.10.7.3.1.19 | Columna1005CoolingSensorDescription | read-only | mandatory | Additional descriptive information about the Cooling sensor orsensor's location. |
| 1.3.6.1.4.1.343.2.10.7.3.1.21 | Columna1005NominalReading | read-only | mandatory | Nominal reading for this fan, in units. 80000000h indicates that this attribute is not supported. |
| 1.3.6.1.4.1.343.2.10.7.3.1.22 | Columna1005LowestNormalReading | read-only | mandatory | Specified lowest normal reading for this fan, in units. Readings beyond this value indicate an abnormal condition. 80000000h indicates that this attribute is n… |
| 1.3.6.1.4.1.343.2.10.7.3.1.23 | Columna1005HighestNormalReading | read-only | mandatory | Specified lowest normal reading for this fan, in units. Readings beyond this value indicate an abnormal condition. 80000000h indicates that this attribute is n… |
| 1.3.6.1.4.1.343.2.10.7.4 | TabletSystemEventLog | not-accessible | mandatory | This group provides raw access to System Event Log (SEL) recordsThis data is intended for use by a Service & Support person |
| 1.3.6.1.4.1.343.2.10.7.4.1 | RoweSystemEventLog | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.10.7.4.1.1 | Columna1006Selfid | read-only | mandatory | A unique number that identifies this row. |
| 1.3.6.1.4.1.343.2.10.7.4.1.2 | Columna1006Timestamp | read-only | mandatory | The time and date when this record was written. |
| 1.3.6.1.4.1.343.2.10.7.4.1.3 | Columna1006RecordType | read-only | mandatory | Type of this record. |
| 1.3.6.1.4.1.343.2.10.7.4.1.4 | Columna1006RecordLength | read-only | mandatory | Length of this record. |
| 1.3.6.1.4.1.343.2.10.7.4.1.5 | Columna1006RecordData | read-only | mandatory | Binary Data associated with this record |
| 1.3.6.1.4.1.343.2.10.7.5 | TabletPagingConfig | not-accessible | mandatory | This group defines all Paging configuration parameters which areset and read from firmware |
| 1.3.6.1.4.1.343.2.10.7.5.1 | RowePagingConfig | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.10.7.5.1.1 | Columna1010PagingSupported | read-only | mandatory | Whether the paging is supported by this version of BMC or not |
| 1.3.6.1.4.1.343.2.10.7.5.1.2 | Columna1010DefaultPepString | read-write | mandatory | String containing default paging phone number and paging message including system phone number |
| 1.3.6.1.4.1.343.2.10.7.5.1.3 | Columna1010GlobalPaging | read-write | mandatory | Flag indicating whether the global paging is to be enabled or disabled |
| 1.3.6.1.4.1.343.2.10.7.5.1.4 | Columna1010PepStringSize | read-only | mandatory | Size of the PEP string in BMC |
| 1.3.6.1.4.1.343.2.10.7.5.1.5 | Columna1010TestPage | read-write | mandatory | Issue a test page. Set of this attribute will result in that. |
| 1.3.6.1.4.1.343.2.10.7.5.1.6 | Columna1010IssuePaging | read-write | mandatory | Writing to this attribute causes an immediatePage request to BMC on all phone numbers. |
| 1.3.6.1.4.1.343.2.10.7.6 | TabletLocalPagingConfig | not-accessible | mandatory | This group defines all Paging configuration parameters which areset and read from dmi itself. This group is not instrumented. |
| 1.3.6.1.4.1.343.2.10.7.6.1 | RoweLocalPagingConfig | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.10.7.6.1.1 | Columna1011PepString1 | read-write | mandatory | String containing first aditional paging phone number and paging message including system phone number |
| 1.3.6.1.4.1.343.2.10.7.6.1.2 | Columna1011PepString2 | read-write | mandatory | String containing second aditional paging phone number and paging message including system phone number |
| 1.3.6.1.4.1.343.2.10.7.6.1.3 | Columna1011RepeatCount | read-write | mandatory | Number of times paging will be repeated on all paging numbers |
| 1.3.6.1.4.1.343.2.10.7.6.1.4 | Columna1011RepeatInterval | read-write | mandatory | Number of minutes to wait before paging again on all paging numbers |
| 1.3.6.1.4.1.343.2.10.7.6.1.5 | Columna1011TestString | read-write | mandatory | String containing phone number on which test page will be generated |
| 1.3.6.1.4.1.343.2.10.7.7 | TabletEmailConfig | not-accessible | mandatory | This group defines all Email configuration parameters which are set and read from sldb.dmi |
| 1.3.6.1.4.1.343.2.10.7.7.1 | RoweEmailConfig | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.10.7.7.1.1 | Columna1012SmtpServer | read-write | mandatory | String containing the Smtp Server name |
| 1.3.6.1.4.1.343.2.10.7.7.1.2 | Columna1012EmailFromAddress | read-write | mandatory | String containing the Email From Address |
| 1.3.6.1.4.1.343.2.10.7.7.1.3 | Columna1012EmailToAddress | read-write | mandatory | String containing the Email To Address |
| 1.3.6.1.4.1.343.2.10.7.7.1.4 | Columna1012EmailSubject | read-write | mandatory | String containing the Email Subject |
| 1.3.6.1.4.1.343.2.10.7.7.1.5 | Columna1012EmailMessage | read-write | mandatory | String containing the Email Message |
| 1.3.6.1.4.1.343.2.10.7.7.1.6 | Columna1012TestEmail | read-write | mandatory | Send a test Email. Set of this attribute will result in that. |
| 1.3.6.1.4.1.343.2.10.7.17 | TabletDpcDiscovery | not-accessible | mandatory | This Group contains informationrelated to DPC Server Discovery and Service Partition Control |
| 1.3.6.1.4.1.343.2.10.7.17.1 | RoweDpcDiscovery | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.10.7.17.1.1 | Columna9000DpcDialNumberString | read-write | mandatory | The Dial Number String Used by DPC client to connect to the DPC server |
| 1.3.6.1.4.1.343.2.10.7.17.1.2 | Columna9000DpcServicePartitionPresenceFlag | read-only | mandatory | This Flag indicates whether DPC Service Partitionis present in the system or not |
| 1.3.6.1.4.1.343.2.10.7.17.1.3 | Columna9000ScanServicePartitionFlag | read-write | mandatory | This flag can be set to inform BIOS to search for DPC Partition during next system boot |
| 1.3.6.1.4.1.343.2.10.7.17.1.4 | Columna9000BootServicePartitionFlag | read-write | mandatory | This flag can be set to inform BIOS to boot to DPC ServicePartit on during next system boot |
| 1.3.6.1.4.1.343.2.10.7.18 | TabletPciHotplugDevice | not-accessible | mandatory | This group defines the attributes for device occupying PHP slots. |
| 1.3.6.1.4.1.343.2.10.7.18.1 | RowePciHotplugDevice | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.10.7.18.1.1 | Columna1008PciHotplugDeviceIndex | read-only | mandatory | An index into the devices for PHP system slots. This is the hardware ID number for each device in each PHP slot, whether it is occupied or not (starting with 1… |
| 1.3.6.1.4.1.343.2.10.7.18.1.2 | Columna1008PciHotplugSlotNumber | read-only | mandatory | The PHP slot number in which this device is occupying. |
| 1.3.6.1.4.1.343.2.10.7.18.1.3 | Columna1008DeviceManufacturer | read-only | mandatory | The Manufacturer of the device. |
| 1.3.6.1.4.1.343.2.10.7.18.1.4 | Columna1008DeviceType | read-only | mandatory | The type of device it is. |
| 1.3.6.1.4.1.343.2.10.7.18.1.5 | Columna1008DeviceRevision | read-only | mandatory | The revision of the device. |
| 1.3.6.1.4.1.343.2.10.7.202 | TabletEventGenerationForCoolingSensors | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.10.7.202.1 | RoweEventGenerationForCoolingSensors | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.10.7.202.1.1 | Columna202EventType | read-only | mandatory | The type of event that has occurred. |
| 1.3.6.1.4.1.343.2.10.7.202.1.2 | Columna202EventSeverity | read-only | mandatory | The severity of this event. |
| 1.3.6.1.4.1.343.2.10.7.202.1.3 | Columna202IsEventState-based | read-only | mandatory | The value of this attributedetermines whether the Event being reportedis a state-based Event or not. If the valueof this attribute is TRUE then the Event issta… |
| 1.3.6.1.4.1.343.2.10.7.202.1.4 | Columna202EventStateKey | read-only | mandatory | A unique, single integer key into the EventState group if this is a state-based Event.If this is not a state-based Event then thisthis attribute's value is not… |
| 1.3.6.1.4.1.343.2.10.7.202.1.5 | Columna202AssociatedGroup | read-only | mandatory | The class name of the group that is associatedwith the events defined in this EventGeneration group. |
| 1.3.6.1.4.1.343.2.10.7.202.1.6 | Columna202EventSystem | read-only | mandatory | The major functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.343.2.10.7.202.1.7 | Columna202EventSubsystem | read-only | mandatory | The minor functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.343.2.10.7.202.1.9 | Columna202IsInstanceDataPresent | read-only | mandatory | Indicates whether the second event block containsinstance-specif c data. |
| 1.3.6.1.4.1.343.2.10.7.202.1.10 | Columna202EventMessage | read-only | mandatory | Auxillary information releated to the eventThis text contains the name of the Probe |
| 1.3.6.1.4.1.412 | Nodedmtf | |||
| 1.3.6.1.4.1.412.2 | NodedmtfStdMifs | |||
| 1.3.6.1.4.1.412.2.4 | NodemapperdmtfGroups | |||
| 1.3.6.1.4.1.412.2.4.1 | TabletGeneralInformation | not-accessible | mandatory | This group defines general information about this system. |
| 1.3.6.1.4.1.412.2.4.1.1 | RoweGeneralInformation | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.1.1.1 | Columna2SystemName | read-write | mandatory | A name to identify this system. |
| 1.3.6.1.4.1.412.2.4.1.1.2 | Columna2SystemLocation | read-write | mandatory | The physical location of this system. |
| 1.3.6.1.4.1.412.2.4.1.1.3 | Columna2SystemPrimaryUserName | read-write | mandatory | The name of the primary user or owner of this system. |
| 1.3.6.1.4.1.412.2.4.1.1.4 | Columna2SystemPrimaryUserPhone | read-write | mandatory | The phone number of the primary user of this system. |
| 1.3.6.1.4.1.412.2.4.1.1.5 | Columna2SystemBootupTime | read-only | mandatory | The time at which the system was last booted. |
| 1.3.6.1.4.1.412.2.4.1.1.6 | Columna2SystemDateTime | read-write | mandatory | The actual system date and time. |
| 1.3.6.1.4.1.412.2.4.2 | TabletOperatingSystem | not-accessible | mandatory | This group defines general information about operating systems installedon this system. |
| 1.3.6.1.4.1.412.2.4.2.1 | RoweOperatingSystem | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.2.1.1 | Columna66OperatingSystemIndex | read-only | mandatory | The index into the operating system table. |
| 1.3.6.1.4.1.412.2.4.2.1.2 | Columna66OperatingSystemName | read-only | mandatory | The name of this operating system. |
| 1.3.6.1.4.1.412.2.4.2.1.3 | Columna66OperatingSystemVersion | read-only | mandatory | The version number of this operating system. |
| 1.3.6.1.4.1.412.2.4.2.1.4 | Columna66PrimaryOperatingSystem | read-only | mandatory | If true, this is the primary operating system. |
| 1.3.6.1.4.1.412.2.4.2.1.5 | Columna66OperatingSystemBootDeviceStorageType | read-only | mandatory | An index into the Disks Table to indicate the device from which thisoperating system was booted. To fully access the Disks Table, this index must becombined wi… |
| 1.3.6.1.4.1.412.2.4.2.1.6 | Columna66OperatingSystemBootDeviceIndex | read-only | mandatory | An index into the Disks Table. |
| 1.3.6.1.4.1.412.2.4.2.1.7 | Columna66OperatingSystemBootPartitionIndex | read-only | mandatory | An index into the Partition table indicating the partition from which thisoperating system booted. |
| 1.3.6.1.4.1.412.2.4.2.1.8 | Columna66OperatingSystemDescription | read-only | mandatory | A description of this operating system. |
| 1.3.6.1.4.1.412.2.4.3 | TabletSystemBios | not-accessible | mandatory | This group defines the attributes for the System BIOS. |
| 1.3.6.1.4.1.412.2.4.3.1 | RoweSystemBios | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.3.1.1 | Columna4BiosIndex | read-only | mandatory | The index into the system BIOS table. |
| 1.3.6.1.4.1.412.2.4.3.1.2 | Columna4BiosManufacturer | read-only | mandatory | The name of the company that wrote this System BIOS. |
| 1.3.6.1.4.1.412.2.4.3.1.3 | Columna4BiosVersion | read-only | mandatory | The version number or version string of this BIOS. |
| 1.3.6.1.4.1.412.2.4.3.1.4 | Columna4BiosRomSize | read-only | mandatory | The physical size of this BIOS ROM device in kilobytes. |
| 1.3.6.1.4.1.412.2.4.3.1.5 | Columna4BiosStartingAddress | read-only | mandatory | The starting physical address for the memory which the BIOS occupies. |
| 1.3.6.1.4.1.412.2.4.3.1.6 | Columna4BiosEndingAddress | read-only | mandatory | The ending physical address for the memory which the BIOS occupies. |
| 1.3.6.1.4.1.412.2.4.3.1.7 | Columna4BiosLoaderVersion | read-only | mandatory | The BIOS flash loader version number or string. |
| 1.3.6.1.4.1.412.2.4.3.1.8 | Columna4BiosReleaseDate | read-only | mandatory | The BIOS release date. |
| 1.3.6.1.4.1.412.2.4.3.1.9 | Columna4PrimaryBios | read-only | mandatory | If true, this is the primary System BIOS. |
| 1.3.6.1.4.1.412.2.4.4 | TabletSystemBiosCharacteristics | not-accessible | mandatory | This group defines the characteristics of the System BIOS. |
| 1.3.6.1.4.1.412.2.4.4.1 | RoweSystemBiosCharacteristics | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.4.1.1 | Columna5BiosCharacteristicIndex | read-only | mandatory | This is an index into the BIOS Characteristics table. |
| 1.3.6.1.4.1.412.2.4.4.1.2 | Columna5BiosNumber | read-only | mandatory | The BIOS number, which correlates to the BIOS Index attribute in theSystem BIOS group. |
| 1.3.6.1.4.1.412.2.4.4.1.3 | Columna5BiosCharacteristic | read-only | mandatory | The different features supported by this version of the BIOS. |
| 1.3.6.1.4.1.412.2.4.4.1.4 | Columna5BiosCharacteristicDescription | read-only | mandatory | An expanded description of this BIOS Characteristic. |
| 1.3.6.1.4.1.412.2.4.5 | TabletProcessor | not-accessible | mandatory | This group defines the attributes for each and every processorin talled in this system. |
| 1.3.6.1.4.1.412.2.4.5.0 | NodetProcessorTraps | |||
| 1.3.6.1.4.1.412.2.4.5.0.256 | Notificationnotification1ForProcessor | current | Processor Internal Error | |
| 1.3.6.1.4.1.412.2.4.5.0.257 | Notificationnotification2ForProcessor | current | Processor Thermal Trip | |
| 1.3.6.1.4.1.412.2.4.5.0.258 | Notificationnotification3ForProcessor | current | Processor FRB-3 Failure | |
| 1.3.6.1.4.1.412.2.4.5.0.259 | Notificationnotification4ForProcessor | current | Processor Disabled | |
| 1.3.6.1.4.1.412.2.4.5.1 | RoweProcessor | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.5.1.1 | Columna6ProcessorIndex | read-only | mandatory | An index into the processor table. |
| 1.3.6.1.4.1.412.2.4.5.1.2 | Columna6ProcessorType | read-only | mandatory | The type of processor currently in the system. |
| 1.3.6.1.4.1.412.2.4.5.1.3 | Columna6ProcessorFamily | read-only | mandatory | The family of processors to which this processor belongs. |
| 1.3.6.1.4.1.412.2.4.5.1.4 | Columna6ProcessorVersionInformation | read-only | mandatory | The version number or string for this processor. |
| 1.3.6.1.4.1.412.2.4.5.1.5 | Columna6MaximumSpeed | read-only | mandatory | The maximum speed (in MHz) of this processor. |
| 1.3.6.1.4.1.412.2.4.5.1.6 | Columna6CurrentSpeed | read-only | mandatory | The current speed (in MHz) of this processor. |
| 1.3.6.1.4.1.412.2.4.5.1.7 | Columna6ProcessorUpgrade | read-only | mandatory | The method by which this processor can be upgraded, if upgrades aresupported. |
| 1.3.6.1.4.1.412.2.4.5.1.8 | Columna6FruGroupIndex | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, thisprovides an index into the FRU table; 'value = -1' indicates that the group is not a F… |
| 1.3.6.1.4.1.412.2.4.5.1.9 | Columna6OperationalGroupIndex | read-only | mandatory | The index into the Operational State Table for this device if applicable. |
| 1.3.6.1.4.1.412.2.4.5.1.10 | Columna6Level1CacheIndex | read-only | mandatory | An index into the System Cache table that identifies the entrythat describes the L1 cache for this processor. If more than oneprocessor points to the same cach… |
| 1.3.6.1.4.1.412.2.4.5.1.11 | Columna6Level2CacheIndex | read-only | mandatory | An index into the System Cache table that identifies the entrythat describes the L2 cache for this processor If more than oneprocessor points to the same cache… |
| 1.3.6.1.4.1.412.2.4.5.1.12 | Columna6Level3CacheIndex | read-only | mandatory | An index into the System Cache table that identifies the entrythat describes the L3 cache for this processor. If more than oneprocessor points to the same cach… |
| 1.3.6.1.4.1.412.2.4.5.1.13 | Columna6Status | read-only | mandatory | The status of this processor |
| 1.3.6.1.4.1.412.2.4.6 | TabletMotherboard | not-accessible | mandatory | This group defines attributes for the motherboard. |
| 1.3.6.1.4.1.412.2.4.6.1 | RoweMotherboard | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.6.1.1 | Columna7NumberOfExpansionSlots | read-only | mandatory | The total number of expansion slots which physically exist on themotherboard whether occupied or not (see System Slots group). |
| 1.3.6.1.4.1.412.2.4.6.1.2 | Columna7FruGroupIndex | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, thisprovides an index into the FRU table; 'value = -1' indicates that the group is not a F… |
| 1.3.6.1.4.1.412.2.4.6.1.3 | Columna7OperationalGroupIndex | read-only | mandatory | The index into the Operational State Table for this device if applicable. |
| 1.3.6.1.4.1.412.2.4.9 | TabletSystemCache | not-accessible | mandatory | This group defines the attributes for different System Caches installed inthis system. |
| 1.3.6.1.4.1.412.2.4.9.1 | RoweSystemCache | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.9.1.1 | Columna10SystemCacheIndex | read-only | mandatory | An index into the System Cache table. |
| 1.3.6.1.4.1.412.2.4.9.1.2 | Columna10SystemCacheLevel | read-only | mandatory | Is this the primary System Cache, or a subsidiary cache? |
| 1.3.6.1.4.1.412.2.4.9.1.3 | Columna10SystemCacheSpeed | read-only | mandatory | The speed of this System Cache module in nanoseconds. |
| 1.3.6.1.4.1.412.2.4.9.1.4 | Columna10SystemCacheSize | read-only | mandatory | The size of this System Cache module in kilobytes. |
| 1.3.6.1.4.1.412.2.4.9.1.5 | Columna10SystemCacheWritePolicy | read-only | mandatory | Is this a write-back or a write-through cache? |
| 1.3.6.1.4.1.412.2.4.9.1.6 | Columna10SystemCacheErrorCorrection | read-only | mandatory | The error correction scheme supported by this cache component. |
| 1.3.6.1.4.1.412.2.4.9.1.7 | Columna10FruGroupIndex | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, thisprovides an index into the FRU table; 'value = -1' indicates that the group is not a F… |
| 1.3.6.1.4.1.412.2.4.9.1.8 | Columna10OperationalGroupIndex | read-only | mandatory | The index into the Operational State Table for this device. |
| 1.3.6.1.4.1.412.2.4.9.1.9 | Columna10SystemCacheType | read-only | mandatory | This defines the system cache type. |
| 1.3.6.1.4.1.412.2.4.10 | TabletParallelPorts | not-accessible | mandatory | This group defines the attributes for parallel ports in this system. |
| 1.3.6.1.4.1.412.2.4.10.1 | RoweParallelPorts | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.10.1.1 | Columna74ParallelPortIndex | read-only | mandatory | An index into the parallel ports table. |
| 1.3.6.1.4.1.412.2.4.10.1.2 | Columna74ParallelBaseIoAddress | read-only | mandatory | Base I/O address for this parallel port. |
| 1.3.6.1.4.1.412.2.4.10.1.3 | Columna74IrqUsed | read-only | mandatory | IRQ number that is being used by this parallel port. |
| 1.3.6.1.4.1.412.2.4.10.1.4 | Columna74LogicalName | read-only | mandatory | The logical name of the I/O device on this parallel port, under thisoperating environment. |
| 1.3.6.1.4.1.412.2.4.10.1.5 | Columna74ConnectorType | read-only | mandatory | The connector used to interface with the I/O device on this parallel port. |
| 1.3.6.1.4.1.412.2.4.10.1.6 | Columna74ConnectorPinout | read-only | mandatory | The pinout used by the I/O device on this parallel port. |
| 1.3.6.1.4.1.412.2.4.10.1.7 | Columna74DmaSupport | read-only | mandatory | If true, DMA is supported. |
| 1.3.6.1.4.1.412.2.4.10.1.8 | Columna74ParallelPortCapabilities | read-only | mandatory | Capabilities of this parallel port. This is a bit field mask with the bitsdefined as follows: Bit 0 (2^0) set = XT/AT compatibleBit 1 (2^1) set = PS/2 compatib… |
| 1.3.6.1.4.1.412.2.4.10.1.9 | Columna74OperationalGroupIndex | read-only | mandatory | The index into the Operational State Table for this device. |
| 1.3.6.1.4.1.412.2.4.10.1.10 | Columna74ParallelPortSecuritySettings | read-only | mandatory | Attribute describing the current hardware security settings on this device |
| 1.3.6.1.4.1.412.2.4.11 | TabletSerialPorts | not-accessible | mandatory | This group defines the attributes for serial ports in this system. |
| 1.3.6.1.4.1.412.2.4.11.1 | RoweSerialPorts | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.11.1.1 | Columna75SerialPortIndex | read-only | mandatory | An index into the serial ports table. |
| 1.3.6.1.4.1.412.2.4.11.1.2 | Columna75SerialBaseIoAddress | read-only | mandatory | Base I/O address for this serial port. |
| 1.3.6.1.4.1.412.2.4.11.1.3 | Columna75IrqUsed | read-only | mandatory | IRQ number that is being used by this serial port. |
| 1.3.6.1.4.1.412.2.4.11.1.4 | Columna75LogicalName | read-only | mandatory | The logical name of this serial port under this operating environment. |
| 1.3.6.1.4.1.412.2.4.11.1.5 | Columna75ConnectorType | read-only | mandatory | The connector used to interface with the I/O device on this serial port. |
| 1.3.6.1.4.1.412.2.4.11.1.6 | Columna75MaximumSpeed | read-only | mandatory | Maximum transfer speed of the device on this serial port in bits persecond. |
| 1.3.6.1.4.1.412.2.4.11.1.7 | Columna75SerialPortCapabilities | read-only | mandatory | The capabilities of this Serial port. |
| 1.3.6.1.4.1.412.2.4.11.1.8 | Columna75OperationalGroupIndex | read-only | mandatory | The index into the Operational State Table for this device. |
| 1.3.6.1.4.1.412.2.4.11.1.9 | Columna75SerialPortSecuritySettings | read-only | mandatory | Attribute describing the current hardware security settings on this device |
| 1.3.6.1.4.1.412.2.4.16 | TabletPowerSupply | not-accessible | mandatory | This group defines various attributes for power supplies in this system. |
| 1.3.6.1.4.1.412.2.4.16.0 | NodetPowerSupplyTraps | |||
| 1.3.6.1.4.1.412.2.4.16.0.256 | Notificationnotification1ForPowerSupply | current | Power Supply Failed | |
| 1.3.6.1.4.1.412.2.4.16.0.257 | Notificationnotification2ForPowerSupply | current | Power Supply OK | |
| 1.3.6.1.4.1.412.2.4.16.0.258 | Notificationnotification3ForPowerSupply | current | Power Supply Likely To Fail | |
| 1.3.6.1.4.1.412.2.4.16.0.259 | Notificationnotification4ForPowerSupply | current | Power Supply Inserted | |
| 1.3.6.1.4.1.412.2.4.16.0.260 | Notificationnotification5ForPowerSupply | current | Power Supply Removed | |
| 1.3.6.1.4.1.412.2.4.16.0.261 | Notificationnotification6ForPowerSupply | current | Power Supply AC lost | |
| 1.3.6.1.4.1.412.2.4.16.0.262 | Notificationnotification7ForPowerSupply | current | Power Supply AC lost or out-of-range | |
| 1.3.6.1.4.1.412.2.4.16.0.263 | Notificationnotification8ForPowerSupply | current | Power Supply AC out-of-range, but present | |
| 1.3.6.1.4.1.412.2.4.16.1 | RowePowerSupply | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.16.1.1 | Columna17PowerSupplyIndex | read-only | mandatory | The index number of the current power supply. |
| 1.3.6.1.4.1.412.2.4.16.1.2 | Columna17FruGroupIndex | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, thisprovides an index into the FRU table; 'value = -1' indicates that the group is not a F… |
| 1.3.6.1.4.1.412.2.4.16.1.3 | Columna17OperationalGroupIndex | read-only | mandatory | The index into the Operational State table for this device. |
| 1.3.6.1.4.1.412.2.4.16.1.4 | Columna17PowerUnitIndex | read-only | mandatory | This is the ID of the Power Unit (logical power supply) to which thisPower Supply belongs. This value matches up with the Power Unit Table Indexattribute defin… |
| 1.3.6.1.4.1.412.2.4.16.1.5 | Columna17PowerSupplyType | read-only | mandatory | This attribute describes the type of Power Supply, e.g. Linear, Switching, Battery, etc. |
| 1.3.6.1.4.1.412.2.4.16.1.6 | Columna17InputVoltageCapabilityDescription | read-only | mandatory | An expanded description of the Input Voltage Capability for this PowerSupply. |
| 1.3.6.1.4.1.412.2.4.16.1.7 | Columna17Range1InputVoltageLow | read-only | mandatory | The low voltage of Input Voltage Range 1 for this Power Supply, inmillivolts. A value of 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.16.1.8 | Columna17Range1InputVoltageHigh | read-only | mandatory | The high voltage of Input Voltage Range 1 for this Power Supply, inmillivolts. A value of 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.16.1.9 | Columna17Range1VoltageProbeIndex | read-only | mandatory | Index into the Voltage Probe table identifying the voltage probemonitoring this input range. 0 indicates no probe provided. |
| 1.3.6.1.4.1.412.2.4.16.1.10 | Columna17Range1ElectricalCurrentProbeIndex | read-only | mandatory | Index into the Elelctrical Current Probe table identifying the Electrical current probe monitoring this input range. 0 indicates no probe provided. |
| 1.3.6.1.4.1.412.2.4.16.1.11 | Columna17Range2InputVoltageLow | read-only | mandatory | The low voltage of Input Voltage Range 2 for this Power Supply, inmillivolts. A value of 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.16.1.12 | Columna17Range2InputVoltageHigh | read-only | mandatory | The high voltage of Input Voltage Range 2 for this Power Supply, inmillivolts. A value of 0x80000000 denotes 'unknown' |
| 1.3.6.1.4.1.412.2.4.16.1.13 | Columna17Range2VoltageProbeIndex | read-only | mandatory | Index into the Voltage Probe table identifying the voltage probemonitoring this input range. 0 indicates no probe provided. |
| 1.3.6.1.4.1.412.2.4.16.1.14 | Columna17Range2CurrentProbeIndex | read-only | mandatory | Index into the Current Probe table identifying the current probemonitoring this input range. 0 indicates no probe provided. |
| 1.3.6.1.4.1.412.2.4.16.1.15 | Columna17ActiveInputVoltageRange | read-only | mandatory | The value of this attribute indicates which input voltage range of thisPower Supply is currently active. |
| 1.3.6.1.4.1.412.2.4.16.1.16 | Columna17InputVoltageRangeSwitching | read-only | mandatory | This attribute describes the kind of input voltage range switching that isimplemented in this power supply. |
| 1.3.6.1.4.1.412.2.4.16.1.17 | Columna17Range1InputFrequencyLow | read-only | mandatory | The frequency at the low end of this power supply's Input FrequencyRange 1. A value of zero implies DC. A value of 0x80000000 denotes 'unknown' |
| 1.3.6.1.4.1.412.2.4.16.1.18 | Columna17Range1InputFrequencyHigh | read-only | mandatory | The frequency at the high end of this power supply's Input FrequencyRange 1. A value of zero implies DC. A value of 0x80000000 denotes 'unknown' |
| 1.3.6.1.4.1.412.2.4.16.1.19 | Columna17Range2InputFrequencyLow | read-only | mandatory | The frequency at the low end of this power supply's Input FrequencyRange 2. A value of zero implies DC. A value of 0x80000000 denotes 'unknown' |
| 1.3.6.1.4.1.412.2.4.16.1.20 | Columna17Range2InputFrequencyHigh | read-only | mandatory | The frequency at the high end of this power supply's Input FrequencyRange 2. A value of zero implies DC. A value of 0x80000000 denotes 'unknown' |
| 1.3.6.1.4.1.412.2.4.16.1.21 | Columna17TotalOutputPower | read-only | mandatory | This attribute value represents the total output power of this powersupply in milliWatts. 0x80000000 denotes 'unknown' |
| 1.3.6.1.4.1.412.2.4.17 | TabletCoolingDevice | not-accessible | mandatory | This group defines various attributes for cooling devices in this system. |
| 1.3.6.1.4.1.412.2.4.17.1 | RoweCoolingDevice | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.17.1.1 | Columna81CoolingDeviceTableIndex | read-only | mandatory | An index into the cooling device table. |
| 1.3.6.1.4.1.412.2.4.17.1.2 | Columna81FruGroupIndex | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, thisprovides an index into the FRU table; 'value = -1' indicates that the group is not a F… |
| 1.3.6.1.4.1.412.2.4.17.1.3 | Columna81OperationalGroupIndex | read-only | mandatory | The index into the Operational State table for this device. |
| 1.3.6.1.4.1.412.2.4.17.1.4 | Columna81CoolingUnitIndex | read-only | mandatory | This is the ID of the Cooling Unit (logical cooling device) of which thisCooling Device is a part. This value matches up with the Cooling Unit Table Indexattri… |
| 1.3.6.1.4.1.412.2.4.17.1.5 | Columna81CoolingDeviceType | read-only | mandatory | The type of Cooling Device that this is e.g. Fan, Heat Pipe, etc. |
| 1.3.6.1.4.1.412.2.4.17.1.6 | Columna81TemperatureProbeIndex | read-only | mandatory | Index into the Temperature Probe table identifying the temperatu eprobe monitoring this cooling device. 0 indicates no probe provided. |
| 1.3.6.1.4.1.412.2.4.18 | TabletSystemSlots | not-accessible | mandatory | This group defines the attributes for the different system expansion slotssupportedin this system. |
| 1.3.6.1.4.1.412.2.4.18.0 | NodetSystemSlotsTraps | |||
| 1.3.6.1.4.1.412.2.4.18.0.1 | Notificationnotification1ForSystemSlots | current | Slot status change to OK | |
| 1.3.6.1.4.1.412.2.4.18.0.2 | Notificationnotification2ForSystemSlots | current | Slot status change to Non-Critical | |
| 1.3.6.1.4.1.412.2.4.18.0.3 | Notificationnotification3ForSystemSlots | current | Slot status change to Critical | |
| 1.3.6.1.4.1.412.2.4.18.0.4 | Notificationnotification4ForSystemSlots | current | Slot Powered On | |
| 1.3.6.1.4.1.412.2.4.18.0.5 | Notificationnotification5ForSystemSlots | current | Slot Powered Off | |
| 1.3.6.1.4.1.412.2.4.18.0.6 | Notificationnotification6ForSystemSlots | current | Slot is Disabled | |
| 1.3.6.1.4.1.412.2.4.18.1 | RoweSystemSlots | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.18.1.1 | Columna19SlotIndex | read-only | mandatory | An index into the system slot table. This is the hardware ID number foreach expansion slot, whether it is occupied or not (starting with 1). |
| 1.3.6.1.4.1.412.2.4.18.1.2 | Columna19SlotType | read-only | mandatory | The bus type supported in this slot. This is a bit field with the followingdefinitions: Bit 0 (2^0), if set, means it is a long-length card; if 0, it is a shor… |
| 1.3.6.1.4.1.412.2.4.18.1.3 | Columna19SlotWidth | read-only | mandatory | The maximum bus width of cards accepted in this slot. |
| 1.3.6.1.4.1.412.2.4.18.1.4 | Columna19CurrentUsage | read-only | mandatory | Is this slot is currently in use? |
| 1.3.6.1.4.1.412.2.4.18.1.5 | Columna19SlotDescription | read-only | mandatory | The card currently occupying this slot. |
| 1.3.6.1.4.1.412.2.4.18.1.6 | Columna19SlotCategory | read-only | mandatory | The word 'slot' is used to refer to bus slots. The last case (motherboard)refers to situations where a functional element is integrated onto, say, a motherboar… |
| 1.3.6.1.4.1.412.2.4.18.1.7 | Columna19VirtualSlot | read-only | mandatory | This attribute indicates whether this is a 'virtual slot' or not. A 'virtualslot' is an expansion site that is permanently occupied because of the level ofinte… |
| 1.3.6.1.4.1.412.2.4.18.1.8 | Columna19ResourceUserId | read-only | mandatory | Value used to locate the rows in the System Resources 2 table forthe resources associated with this slot or expansion site. 0 = 'unspecified'. |
| 1.3.6.1.4.1.412.2.4.18.1.9 | Columna19VccMixedVoltageSupport | read-only | mandatory | Device Vcc Mixed Voltage support. This is a bit field with the following definitions: Bit 0 (2^0), if set, indicates 3.3V support Bit 1 (2^1), if set, indicate… |
| 1.3.6.1.4.1.412.2.4.18.1.10 | Columna19VppMixedVoltageSupport | read-only | mandatory | Device Vpp Mixed Voltage support. This is a bit field with the following definitions: Bit 0 (2^0), if set, indicates 3.3V support Bit 1 (2^1), if set, indicate… |
| 1.3.6.1.4.1.412.2.4.18.1.11 | Columna19SlotThermalRating | read-only | mandatory | The maximum thermal dissipation of the slot in milliwatts. |
| 1.3.6.1.4.1.412.2.4.18.1.12 | Columna19OperationalGroupIndex | read-only | mandatory | The index into the Operational State table for this device. |
| 1.3.6.1.4.1.412.2.4.18.1.13 | Columna19SlotPowerState | read-only | mandatory | The current state of the PHP system slot. |
| 1.3.6.1.4.1.412.2.4.18.1.14 | Columna19SlotFaultState | read-only | mandatory | The current error state for the PHP system slot. |
| 1.3.6.1.4.1.412.2.4.18.1.15 | Columna19SlotSwitchStatus | read-only | mandatory | Is the PHP Switch Closed? |
| 1.3.6.1.4.1.412.2.4.19 | TabletVideo | not-accessible | mandatory | This group defines the attributes of video devices in this system. |
| 1.3.6.1.4.1.412.2.4.19.1 | RoweVideo | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.19.1.1 | Columna83VideoIndex | read-only | mandatory | An index into the video table. |
| 1.3.6.1.4.1.412.2.4.19.1.2 | Columna83VideoType | read-only | mandatory | The architecture of the video subsystem in this system. |
| 1.3.6.1.4.1.412.2.4.19.1.3 | Columna83CurrentVideoMode | read-only | mandatory | The current video mode in this system. |
| 1.3.6.1.4.1.412.2.4.19.1.4 | Columna83MinimumRefreshRate | read-only | mandatory | The minimum refresh rate for this video subsystem in Hz. |
| 1.3.6.1.4.1.412.2.4.19.1.5 | Columna83MaximumRefreshRate | read-only | mandatory | The maximum refresh rate for this video subsystem in Hz. |
| 1.3.6.1.4.1.412.2.4.19.1.6 | Columna83VideoMemoryType | read-only | mandatory | The type of video memory for this adapter. |
| 1.3.6.1.4.1.412.2.4.19.1.7 | Columna83VideoRamMemorySize | read-only | mandatory | Video adapter memory size in kilobytes. |
| 1.3.6.1.4.1.412.2.4.19.1.8 | Columna83ScanMode | read-only | mandatory | The scan mode for this video device. |
| 1.3.6.1.4.1.412.2.4.19.1.9 | Columna83VideoPhysicalLocation | read-only | mandatory | The location of the video controller circuitry. |
| 1.3.6.1.4.1.412.2.4.19.1.10 | Columna83CurrentVerticalResolution | read-only | mandatory | The current number of vertical pixels. |
| 1.3.6.1.4.1.412.2.4.19.1.11 | Columna83CurrentHorizontalResolution | read-only | mandatory | The current number of horizontal pixels. |
| 1.3.6.1.4.1.412.2.4.19.1.12 | Columna83CurrentNumberOfBitsPerPixel | read-only | mandatory | The number of bits used to display each pixel for this video device. |
| 1.3.6.1.4.1.412.2.4.19.1.13 | Columna83CurrentNumberOfRows | read-only | mandatory | The number of rows in character mode for this video device. |
| 1.3.6.1.4.1.412.2.4.19.1.14 | Columna83CurrentNumberOfColumns | read-only | mandatory | The number of columns in character mode for this video device. |
| 1.3.6.1.4.1.412.2.4.19.1.15 | Columna83CurrentRefreshRate | read-only | mandatory | The current refresh rate in Hz for this video device. |
| 1.3.6.1.4.1.412.2.4.19.1.16 | Columna83FruGroupIndex | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, thisprovides an index into the FRU table; 'value = -1' indicates that the group is not a F… |
| 1.3.6.1.4.1.412.2.4.19.1.17 | Columna83OperationalGroupIndex | read-only | mandatory | The index into the Operational State table for this device. |
| 1.3.6.1.4.1.412.2.4.20 | TabletVideoBios | not-accessible | mandatory | This group defines the attributes for the Video BIOS. |
| 1.3.6.1.4.1.412.2.4.20.1 | RoweVideoBios | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.20.1.1 | Columna84VideoBiosIndex | read-only | mandatory | The index into the Video BIOS table. |
| 1.3.6.1.4.1.412.2.4.20.1.2 | Columna84VideoBiosManufacturer | read-only | mandatory | The name of the company that wrote this Video BIOS. |
| 1.3.6.1.4.1.412.2.4.20.1.3 | Columna84VideoBiosVersion | read-only | mandatory | The version number or version string of this Video BIOS. |
| 1.3.6.1.4.1.412.2.4.20.1.4 | Columna84VideoBiosReleaseDate | read-only | mandatory | The Video BIOS release date. |
| 1.3.6.1.4.1.412.2.4.20.1.5 | Columna84VideoBiosShadowingState | read-only | mandatory | If true, the Video BIOS is currently being shadowed. |
| 1.3.6.1.4.1.412.2.4.27 | TabletMouse | not-accessible | mandatory | This group defines the characteristics of a mouse input device. |
| 1.3.6.1.4.1.412.2.4.27.1 | RoweMouse | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.27.1.1 | Columna91MouseInterface | read-only | mandatory | The interface type of this mouse. |
| 1.3.6.1.4.1.412.2.4.27.1.2 | Columna91MouseIrq | read-only | mandatory | The IRQ number used by this mouse. |
| 1.3.6.1.4.1.412.2.4.27.1.3 | Columna91MouseButtons | read-only | mandatory | The number of mouse buttons on this mouse. |
| 1.3.6.1.4.1.412.2.4.27.1.4 | Columna91MousePortName | read-only | mandatory | The name of the port currently being used by this mouse. |
| 1.3.6.1.4.1.412.2.4.27.1.5 | Columna91MouseDriverName | read-only | mandatory | The name of the mouse driver. |
| 1.3.6.1.4.1.412.2.4.27.1.6 | Columna91MouseDriverVersion | read-only | mandatory | The version number of the mouse driver. |
| 1.3.6.1.4.1.412.2.4.27.1.7 | Columna91FruGroupIndex | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, thisprovides an index into the FRU table; 'value = -1' indicates that the group is not a F… |
| 1.3.6.1.4.1.412.2.4.27.1.8 | Columna91OperationalGroupIndex | read-only | mandatory | The index into the Operational State table for this device. |
| 1.3.6.1.4.1.412.2.4.27.1.9 | Columna91SecuritySettings | read-only | mandatory | Enum describing the current hardware security settings on this device |
| 1.3.6.1.4.1.412.2.4.28 | TabletKeyboard | not-accessible | mandatory | This group defines the characteristics of the system keyboard. |
| 1.3.6.1.4.1.412.2.4.28.1 | RoweKeyboard | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.28.1.1 | Columna92KeyboardLayout | read-only | mandatory | A description of the layout of this keyboard. |
| 1.3.6.1.4.1.412.2.4.28.1.2 | Columna92KeyboardType | read-only | mandatory | The type description of this keyboard. |
| 1.3.6.1.4.1.412.2.4.28.1.3 | Columna92KeyboardConnectorType | read-only | mandatory | The type of keyboard connector used by this keyboard. |
| 1.3.6.1.4.1.412.2.4.28.1.4 | Columna92FruGroupIndex | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, thisprovides an index into the FRU table; 'value = -1' indicates that the group is not a F… |
| 1.3.6.1.4.1.412.2.4.28.1.5 | Columna92OperationalGroupIndex | read-only | mandatory | The index into the Operational State table for this device. |
| 1.3.6.1.4.1.412.2.4.28.1.6 | Columna92SecuritySettings | read-only | mandatory | Enum describing the current hardware security settings on this device |
| 1.3.6.1.4.1.412.2.4.29 | TabletFieldReplaceableUnit | not-accessible | mandatory | A Field Replaceable Unit (FRU), is defined as a hardware componentwhich is designed to be separately removable for replacement or repair. For thepurposes of th… |
| 1.3.6.1.4.1.412.2.4.29.1 | RoweFieldReplaceableUnit | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.29.1.1 | Columna30FruIndex | read-only | mandatory | The index into the Field Replaceable Unit table. |
| 1.3.6.1.4.1.412.2.4.29.1.2 | Columna30DeviceGroupIndex | read-only | mandatory | The group ID of the group referencing this Field Replaceable Unitinstance. |
| 1.3.6.1.4.1.412.2.4.29.1.3 | Columna30Description | read-only | mandatory | A clear description of this Field Replaceable Unit. |
| 1.3.6.1.4.1.412.2.4.29.1.4 | Columna30Manufacturer | read-only | mandatory | The name of the company manufacturing or providing this FieldRep aceableUnit. |
| 1.3.6.1.4.1.412.2.4.29.1.5 | Columna30Model | read-only | mandatory | The manufacturer's model number for this Field Replaceable Unit. |
| 1.3.6.1.4.1.412.2.4.29.1.6 | Columna30PartNumber | read-only | mandatory | A part number by which a replacement part can be ordered for this FieldReplaceable Unit. |
| 1.3.6.1.4.1.412.2.4.29.1.7 | Columna30FruSerialNumber | read-only | mandatory | The manufacturer's serial number for this Field Replaceable Unit. |
| 1.3.6.1.4.1.412.2.4.29.1.8 | Columna30RevisionLevel | read-only | mandatory | The revision level of this Field Replaceable Unit. |
| 1.3.6.1.4.1.412.2.4.29.1.9 | Columna30WarrantyStartDate | read-only | mandatory | The start date of the service warranty for this Field Replaceabl Unit. |
| 1.3.6.1.4.1.412.2.4.29.1.10 | Columna30WarrantyDuration | read-only | mandatory | The total duration of this Field Replaceable Unit warranty in months. |
| 1.3.6.1.4.1.412.2.4.29.1.11 | Columna30SupportPhoneNumber | read-only | mandatory | The phone number(s) for support for this Field Replaceable Unit. |
| 1.3.6.1.4.1.412.2.4.29.1.12 | Columna30FruInternetUniformResourceLocator | read-only | mandatory | The Internet Uniform Resource Locator string that can be used through a World Wide Web browser to obtain further information about this FRU |
| 1.3.6.1.4.1.412.2.4.30 | TabletOperationalState | not-accessible | mandatory | This group provides the operational state, usage, and availabili y status,and administrative state indicators for specific Device Group instances |
| 1.3.6.1.4.1.412.2.4.30.1 | RoweOperationalState | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.30.1.1 | Columna31OperationalStateInstanceIndex | read-only | mandatory | The Index into the Operational State table. |
| 1.3.6.1.4.1.412.2.4.30.1.2 | Columna31DeviceGroupIndex | read-only | mandatory | The group ID of the group referencing this instance. |
| 1.3.6.1.4.1.412.2.4.30.1.3 | Columna31OperationalStatus | read-only | mandatory | The operational status of the Device Group instance. |
| 1.3.6.1.4.1.412.2.4.30.1.4 | Columna31UsageState | read-only | mandatory | The usage state of the Device Group instance. |
| 1.3.6.1.4.1.412.2.4.30.1.5 | Columna31AvailabilityStatus | read-only | mandatory | The availability status of the Device Group instance. |
| 1.3.6.1.4.1.412.2.4.30.1.6 | Columna31AdministrativeState | read-only | mandatory | The administrative state of the Device Group instance. |
| 1.3.6.1.4.1.412.2.4.30.1.7 | Columna31FatalErrorCount | read-only | mandatory | The accumulated Fatal or Non-recoverable error count for this Device Group instance. |
| 1.3.6.1.4.1.412.2.4.30.1.8 | Columna31MajorErrorCount | read-only | mandatory | The accumulated Major or Critical error count for this Device Group instance. |
| 1.3.6.1.4.1.412.2.4.30.1.9 | Columna31WarningErrorCount | read-only | mandatory | The accumulated Warning or Non-Critical error count for this Device Group instance. |
| 1.3.6.1.4.1.412.2.4.30.1.10 | Columna31CurrentErrorStatus | read-only | mandatory | This attribute presents the current error status for this Device Group instance. The most critical error status in effect should be presented. I.e. if a part o… |
| 1.3.6.1.4.1.412.2.4.30.1.11 | Columna31DevicePredictedFailureStatus | read-only | mandatory | Enumeration describing the current Device Predicted Failure Status (e.g.: the S.M.A.R.T. status of the device). |
| 1.3.6.1.4.1.412.2.4.33 | TabletPhysicalMemoryArray | not-accessible | mandatory | This group represents an array of physical memory as a collectio ofone or more Memory Devices associated in sets and partitions. |
| 1.3.6.1.4.1.412.2.4.33.0 | NodetPhysicalMemoryArrayTraps | |||
| 1.3.6.1.4.1.412.2.4.33.0.256 | Notificationnotification1ForPhysicalMemory | current | Single BIT ECC Error | |
| 1.3.6.1.4.1.412.2.4.33.0.257 | Notificationnotification2ForPhysicalMemory | current | Multi BIT ECC Error from previous boot | |
| 1.3.6.1.4.1.412.2.4.33.0.258 | Notificationnotification3ForPhysicalMemory | current | Memory Scrub Failed | |
| 1.3.6.1.4.1.412.2.4.33.0.259 | Notificationnotification4ForPhysicalMemory | current | Memory Device Disabled | |
| 1.3.6.1.4.1.412.2.4.33.0.260 | Notificationnotification5ForPhysicalMemory | current | Memory Error Logging Limit Reached | |
| 1.3.6.1.4.1.412.2.4.33.1 | RowePhysicalMemoryArray | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.33.1.1 | Columna34MemoryArrayTableIndex | read-only | mandatory | A unique number that identifies this row. |
| 1.3.6.1.4.1.412.2.4.33.1.2 | Columna34MemoryArrayLocation | read-only | mandatory | The physical location of the Memory Array, whether on the systemboard or an add-on board. |
| 1.3.6.1.4.1.412.2.4.33.1.3 | Columna34MemoryArrayUse | read-only | mandatory | What this Memory Array is used for. |
| 1.3.6.1.4.1.412.2.4.33.1.4 | Columna34MaximumMemoryCapacity | read-only | mandatory | The maximum memory capacity, in kilobytes, on this array. 0x80000000denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.33.1.5 | Columna34NumberOfMemoryDeviceSockets | read-only | mandatory | The number of SIMM slots or sockets available for Memory Devices inthis array. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.33.1.6 | Columna34NumberOfMemoryDeviceSocketsUsed | read-only | mandatory | The number of SIMM slots or sockets in use for Memory Devices in thisarray. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.33.1.7 | Columna34MemoryErrorCorrection | read-only | mandatory | The main hardware error correction or detection method supported bythis Memory Array. |
| 1.3.6.1.4.1.412.2.4.33.1.8 | Columna34ArrayErrorType | read-only | mandatory | The type of error that is associated with the current status reported inOperational State for this Memory Array. |
| 1.3.6.1.4.1.412.2.4.33.1.9 | Columna34LastErrorUpdate | read-only | mandatory | System state during which last error status was collected. |
| 1.3.6.1.4.1.412.2.4.33.1.10 | Columna34ErrorOperation | read-only | mandatory | The memory access operation that caused the current error. |
| 1.3.6.1.4.1.412.2.4.33.1.11 | Columna34ErrorDataSize | read-only | mandatory | The size of the data transfer that caused the error, in bits. Zero indicatesno error, 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.33.1.12 | Columna34ErrorData | read-only | mandatory | Data captured during the erroneous Memory Array access. The dataoccupy the first n bytes of the octetstring required to hold 'Error Data Size' bits of thedata.… |
| 1.3.6.1.4.1.412.2.4.33.1.13 | Columna34VendorSyndrome | read-only | mandatory | Vendor-specific syndrome or CRC data associated with the erroneousaccess. |
| 1.3.6.1.4.1.412.2.4.33.1.14 | Columna34ErrorAddress | read-only | mandatory | Physical address of the error based on the addressing of the bus that theMemory Array is connected to. 0x8000 0000 0000 0000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.33.1.15 | Columna34ErrorResolution | read-only | mandatory | Range in bytes that the error can be determined to be within, when anError Address is given. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.33.1.16 | Columna34FruGroupIndex | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, thisprovides an index into the FRU table; 'value = -1' indicates that the group is not aFR… |
| 1.3.6.1.4.1.412.2.4.33.1.17 | Columna34OperationalGroupIndex | read-only | mandatory | The index into the Operational State Table for this Memory Array. TheOperational State row is used to hold the overall error count and error status for thisarr… |
| 1.3.6.1.4.1.412.2.4.34 | TabletMemoryArrayMappedAddresses | not-accessible | mandatory | This table presents ranges of physical addresses that are mapped to agiven Memory Array. |
| 1.3.6.1.4.1.412.2.4.34.1 | RoweMemoryArrayMappedAddresses | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.34.1.1 | Columna35MemoryArrayMappedAddressesTableIndex | read-only | mandatory | A unique number that identifies this row. |
| 1.3.6.1.4.1.412.2.4.34.1.2 | Columna35MemoryArrayIndex | read-only | mandatory | The ID of the Memory Array that this address range is mapped to.Multiple address ranges may be mapped to a Memory Array. |
| 1.3.6.1.4.1.412.2.4.34.1.3 | Columna35MappedRangeStartingAddress | read-only | mandatory | The physical starting address, in kilobytes, of a range of memorymapped to the specified Memory Array. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.34.1.4 | Columna35MappedRangeEndingAddress | read-only | mandatory | The physical ending address of the last kilobyte of a range of addressesmapped to the specified Memory Array. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.34.1.5 | Columna35PartitionId | read-only | mandatory | Identifies a Memory Partition associated with the Memory Arrayspecified by Memory Array Table Index. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.34.1.6 | Columna35PartitionWidth | read-only | mandatory | The number of Memory Devices that form a single row of memory forthe partition. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.34.1.7 | Columna35OperationalGroupIndex | read-only | mandatory | The index into the Operational State Table for this Memory Range.Generally, there will be a 1:1 correspondence between a mapped range and a partition.In which … |
| 1.3.6.1.4.1.412.2.4.35 | TabletMemoryDevice | not-accessible | mandatory | This group presents information about individual memory devices in thesystem. A memory device can be a SIMM, a SIPP, or a single chip, or an entire card -based… |
| 1.3.6.1.4.1.412.2.4.35.1 | RoweMemoryDevice | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.35.1.1 | Columna36MemoryDeviceTableIndex | read-only | mandatory | A unique number that identifies this row. |
| 1.3.6.1.4.1.412.2.4.35.1.2 | Columna36MemoryArrayIndex | read-only | mandatory | The ID of the Memory Array that this Memory Device is a part of. |
| 1.3.6.1.4.1.412.2.4.35.1.3 | Columna36DeviceLocator | read-only | mandatory | A string identifying the physically labeled socket or board positionwhere the memory device is located. Eg. 'SIMM 3' or 'IC12'. |
| 1.3.6.1.4.1.412.2.4.35.1.4 | Columna36BankLocator | read-only | mandatory | A string identifying the physically labeled bank where the memorydevice is located. Eg. 'Bank 0' or 'A'. |
| 1.3.6.1.4.1.412.2.4.35.1.5 | Columna36Size | read-only | mandatory | Size of this memory device, in bytes. |
| 1.3.6.1.4.1.412.2.4.35.1.6 | Columna36FormFactor | read-only | mandatory | Implementation form factor for this memory device. |
| 1.3.6.1.4.1.412.2.4.35.1.7 | Columna36TotalWidth | read-only | mandatory | Total width of this memory device, including check or error correctionbits, in bits. If there are no error correction bits, the value in this attribute should … |
| 1.3.6.1.4.1.412.2.4.35.1.8 | Columna36DataWidth | read-only | mandatory | Data width of this memory device, in bits. A data width of 0 and a TotalWidth of 8 would indicate that the device is solely being used to provide eight errorco… |
| 1.3.6.1.4.1.412.2.4.35.1.9 | Columna36MemoryType | read-only | mandatory | Type of memory used in this memory device. |
| 1.3.6.1.4.1.412.2.4.35.1.10 | Columna36TypeDetail | read-only | mandatory | Additional detail on the device type. |
| 1.3.6.1.4.1.412.2.4.35.1.11 | Columna36DeviceSet | read-only | mandatory | This attribute is used to identify when the Memory Device is one of a setof Memory Devices that must be populated with all devices of the same type and size, a… |
| 1.3.6.1.4.1.412.2.4.35.1.12 | Columna36DeviceErrorType | read-only | mandatory | The type of error that is associated with the current status reported inOperational State for this Memory Device. |
| 1.3.6.1.4.1.412.2.4.35.1.13 | Columna36ErrorGranularity | read-only | mandatory | Specifies whether the current error's location can be resolved to thepartition or device level. |
| 1.3.6.1.4.1.412.2.4.35.1.14 | Columna36LastErrorUpdate | read-only | mandatory | System state during which the last error update was collected. |
| 1.3.6.1.4.1.412.2.4.35.1.15 | Columna36ErrorOperation | read-only | mandatory | The memory access operation that caused the current error. |
| 1.3.6.1.4.1.412.2.4.35.1.16 | Columna36ErrorDataSize | read-only | mandatory | The size of the data transfer that caused the error,in bits. Zero indicatesno error, 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.35.1.17 | Columna36ErrorData | read-only | mandatory | Data captured during the erroneous Memory Array access. The dataoccupies the first n bytes of the octetstring required to hold 'Error Data Size' bits of thedat… |
| 1.3.6.1.4.1.412.2.4.35.1.18 | Columna36VendorSyndrome | read-only | mandatory | Vendor-specific syndrome or CRC data associated withthe erroneou access. |
| 1.3.6.1.4.1.412.2.4.35.1.19 | Columna36DeviceErrorAddress | read-only | mandatory | Physical address of the error relative to the start of the device, in bytes.0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.35.1.20 | Columna36ArrayErrorAddress | read-only | mandatory | Physical address of the kilobyte where the error is located, relative to thebus for the Memory Array. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.35.1.21 | Columna36ErrorResolution | read-only | mandatory | Range in bytes that the error can be determined to be within, when anError Address is given. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.35.1.22 | Columna36FruGroupIndex | read-only | mandatory | If this is a Field Replaceable Unit or if it is partof another FRU, thisprovides an index into the FRU table; 'value = -1' indicates that the group is not a FR… |
| 1.3.6.1.4.1.412.2.4.35.1.23 | Columna36OperationalGroupIndex | read-only | mandatory | The index into the Operational State Table for this device. |
| 1.3.6.1.4.1.412.2.4.36 | TabletMemoryDeviceMappedAddresses | not-accessible | mandatory | This table presents ranges of physical addresses that are mapped to agiven Memory Device Set. |
| 1.3.6.1.4.1.412.2.4.36.1 | RoweMemoryDeviceMappedAddresses | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.36.1.1 | Columna37MemoryDeviceMappedAddressesTableIndex | read-only | mandatory | A unique number that identifies this row. |
| 1.3.6.1.4.1.412.2.4.36.1.2 | Columna37MemoryDeviceSetId | read-only | mandatory | The row in the Memory Device table that this address range is for. Thismatches with a Memory Device Table Index. There may be multiple rows in MemoryDevice Map… |
| 1.3.6.1.4.1.412.2.4.36.1.3 | Columna37Partition | read-only | mandatory | Identifies the Memory partition in the Memory Array Mapped Addressestable that this Memory Device is part of. Partition number should be positive.0x80000000 de… |
| 1.3.6.1.4.1.412.2.4.36.1.4 | Columna37MappedRangeStartingAddress | read-only | mandatory | The physical starting address, in kilobytes, of a range of memorymapped to the specified Memory Device set. The address is specified relative to the busthat th… |
| 1.3.6.1.4.1.412.2.4.36.1.5 | Columna37MappedRangeEndingAddress | read-only | mandatory | The physical ending address of the last kilobyte of a range of addressesmapped to the specified Memory Device. The address is specified relative to the busthat… |
| 1.3.6.1.4.1.412.2.4.36.1.6 | Columna37PartitionRowPosition | read-only | mandatory | This specifies the position of the device in a row of the partition. Forexample, if it takes two 8-bit memory devices to form a 16-bit row, then a value of '2'… |
| 1.3.6.1.4.1.412.2.4.36.1.7 | Columna37InterleavePosition | read-only | mandatory | The position of this device in an interleave. 0 indicates non-interleaved.1 indicates the first position 2 the second, and so on. For example, in a 2:1 interle… |
| 1.3.6.1.4.1.412.2.4.36.1.8 | Columna37DataDepth | read-only | mandatory | The maximum number of consecutive rows accessed from this device ina single interleaved transfer. For example, if a device transfer two rows each time it'sread… |
| 1.3.6.1.4.1.412.2.4.49 | TabletSystemHardwareSecurity | not-accessible | mandatory | This group describes the system-wide hardware security settings. |
| 1.3.6.1.4.1.412.2.4.49.1 | RoweSystemHardwareSecurity | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.49.1.1 | Columna50Power-onPasswordStatus | read-only | mandatory | The current power-on password setting on the system. |
| 1.3.6.1.4.1.412.2.4.49.1.2 | Columna50KeyboardPasswordStatus | read-only | mandatory | The current keyboard password setting on the system |
| 1.3.6.1.4.1.412.2.4.49.1.3 | Columna50AdministratorPasswordStatus | read-only | mandatory | The current administrator password setting on the system. This passwordis required to make hardware configuration changes to the system. |
| 1.3.6.1.4.1.412.2.4.49.1.4 | Columna50FrontPanelResetStatus | read-write | mandatory | The present status of the front panel reset button capability. If Enabled, the machine can be reset via the front panel reset button. IfDisable , the reset but… |
| 1.3.6.1.4.1.412.2.4.51 | TabletSystemPowerControls | not-accessible | mandatory | This group defines attributes for controlling the main power supply tothe system. |
| 1.3.6.1.4.1.412.2.4.51.1 | RoweSystemPowerControls | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.51.1.1 | Columna52PowerControlRequest | read-write | mandatory | Reading the value of this attribute gives the value of the last valid power control request that was written into it. Writing a valid value into it causes the … |
| 1.3.6.1.4.1.412.2.4.51.1.2 | Columna52TimedPower-onAvailable | read-only | mandatory | Defines whether a timed power-on facility is available. |
| 1.3.6.1.4.1.412.2.4.51.1.3 | Columna52TimeToNextScheduledPower-on | read-write | mandatory | The number of seconds until the next timed power-on is scheduled tooccur. A value of 0 means that if the system is powered off, no automatic timed poweron will… |
| 1.3.6.1.4.1.412.2.4.53 | TabletVoltageProbe | not-accessible | mandatory | This group defines the attributes for the voltage probes in this system. |
| 1.3.6.1.4.1.412.2.4.53.0 | NodetVoltageProbeTraps | |||
| 1.3.6.1.4.1.412.2.4.53.0.256 | Notificationnotification1ForVoltageProbe | current | Status Changed to OK | |
| 1.3.6.1.4.1.412.2.4.53.0.257 | Notificationnotification2ForVoltageProbe | current | Status Changed to Upper Critical | |
| 1.3.6.1.4.1.412.2.4.53.0.258 | Notificationnotification3ForVoltageProbe | current | Status Changed to Lower Critical | |
| 1.3.6.1.4.1.412.2.4.53.0.259 | Notificationnotification4ForVoltageProbe | current | Status Changed to from OK to Upper Non Critical | |
| 1.3.6.1.4.1.412.2.4.53.0.260 | Notificationnotification5ForVoltageProbe | current | Status Changed to from OK to Lower Non Critical | |
| 1.3.6.1.4.1.412.2.4.53.0.261 | Notificationnotification6ForVoltageProbe | current | Status Changed to from Upper Critical to Upper Non Critical | |
| 1.3.6.1.4.1.412.2.4.53.0.262 | Notificationnotification7ForVoltageProbe | current | Status Changed to from Lower Critical to Lower Non Critical | |
| 1.3.6.1.4.1.412.2.4.53.1 | RoweVoltageProbe | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.53.1.1 | Columna54VoltageProbeIndex | read-only | mandatory | Index into this voltage probe table. |
| 1.3.6.1.4.1.412.2.4.53.1.2 | Columna54VoltageProbeLocation | read-only | mandatory | Identifies the physical location of the voltage probe. |
| 1.3.6.1.4.1.412.2.4.53.1.3 | Columna54VoltageProbeDescription | read-only | mandatory | Additional descriptive information about the voltage probe or probe'slocation. |
| 1.3.6.1.4.1.412.2.4.53.1.4 | Columna54VoltageStatus | read-only | mandatory | Defines the status of the voltage monitored by this voltage probe. |
| 1.3.6.1.4.1.412.2.4.53.1.5 | Columna54VoltageProbeVoltageLevel | read-only | mandatory | The current voltage level of this voltage probe in millivolts. 0x8000000denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.6 | Columna54MonitoredVoltageNominalLevel | read-only | mandatory | The nominal voltage level of the voltage monitored by this probe inmillivolts. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.7 | Columna54MonitoredVoltageNormalMaximum | read-only | mandatory | The normal maximum voltage level of the voltage monitored by thisprobe in millivolts. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.8 | Columna54MonitoredVoltageNormalMinimum | read-only | mandatory | The normal minimum voltage level of the voltage monitored by thisprobe in millivolts. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.9 | Columna54VoltageProbeMaximum | read-only | mandatory | The maximum voltage level specified to be readable by this probe inmillivolts. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.10 | Columna54VoltageProbeMinimum | read-only | mandatory | The minimum voltage level specified to be readable by this probe inmillivolts. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.11 | Columna54VoltageLevelLowerThreshold-Non-critic | read-write | mandatory | The lower non-critical threshold for the voltage level set by the user, inmillivolts. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.12 | Columna54VoltageLevelUpperThreshold-Non-critic | read-write | mandatory | The upper non-critical threshold for the voltage probe, in millivolts.0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.13 | Columna54VoltageLevelLowerThreshold-Critical | read-write | mandatory | The lower critical threshold for the voltage probe, in millivolt .0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.14 | Columna54VoltageLevelUpperThreshold-Critical | read-write | mandatory | The upper critical threshold for the voltage probe, in millivolt .0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.15 | Columna54VoltageLevelLowerThreshold-Non-recove | read-write | mandatory | The lower non-recoverable threshold for the voltage probe, in millivolts.0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.16 | Columna54VoltageLevelUpperThreshold-Non-recove | read-write | mandatory | The upper non-recoverable threshold for the voltage probe, in millivolts.0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.17 | Columna54VoltageProbeResolution | read-write | mandatory | The resolution for the reading from this voltage probe, in tenths ofmillivolts. '0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.18 | Columna54VoltageProbeTolerance | read-write | mandatory | The tolerance for the reading from this voltage probe, in plus/minusmillivolts. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.19 | Columna54VoltageProbeAccuracy | read-write | mandatory | The accuracy for the reading from this voltage probe, in plus/minushundredths of a percent. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.20 | Columna54FruGroupIndex | read-only | mandatory | Index into the FRU table |
| 1.3.6.1.4.1.412.2.4.53.1.21 | Columna54OperationalGroupIndex | read-only | mandatory | Index into the Operational State table |
| 1.3.6.1.4.1.412.2.4.54 | TabletTemperatureProbe | not-accessible | mandatory | This group defines the attributes for the temperature probes in thissystem. |
| 1.3.6.1.4.1.412.2.4.54.0 | NodetTemperatureProbeTraps | |||
| 1.3.6.1.4.1.412.2.4.54.0.256 | Notificationnotification1ForTemperatureProbe | current | Status Changed to OK | |
| 1.3.6.1.4.1.412.2.4.54.0.257 | Notificationnotification2ForTemperatureProbe | current | Status Changed to Upper Critical | |
| 1.3.6.1.4.1.412.2.4.54.0.258 | Notificationnotification3ForTemperatureProbe | current | Status Changed to Lower Critical | |
| 1.3.6.1.4.1.412.2.4.54.0.259 | Notificationnotification4ForTemperatureProbe | current | Status Changed to from OK to Upper Non Critical | |
| 1.3.6.1.4.1.412.2.4.54.0.260 | Notificationnotification5ForTemperatureProbe | current | Status Changed to from OK to Lower Non Critical | |
| 1.3.6.1.4.1.412.2.4.54.0.261 | Notificationnotification6ForTemperatureProbe | current | Status Changed to from Upper Critical to Upper Non Critical | |
| 1.3.6.1.4.1.412.2.4.54.0.262 | Notificationnotification7ForTemperatureProbe | current | Status Changed to from Lower Critical to Lower Non Critical | |
| 1.3.6.1.4.1.412.2.4.54.1 | RoweTemperatureProbe | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.54.1.1 | Columna55TemperatureProbeTableIndex | read-only | mandatory | Index into this temperature probe table. |
| 1.3.6.1.4.1.412.2.4.54.1.2 | Columna55TemperatureProbeLocation | read-only | mandatory | Identifies the physical location of the temperature probe. |
| 1.3.6.1.4.1.412.2.4.54.1.3 | Columna55TemperatureProbeDescription | read-only | mandatory | Additional descriptive information about the temperature probe orprobe's location. |
| 1.3.6.1.4.1.412.2.4.54.1.4 | Columna55TemperatureStatus | read-only | mandatory | Defines the status of the temperature monitored by this temperat reprobe. |
| 1.3.6.1.4.1.412.2.4.54.1.5 | Columna55TemperatureProbeTemperatureReading | read-only | mandatory | The present temperature reading of this temperature probe in 1/10th degrees C. 0x8000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.6 | Columna55MonitoredTemperatureNominalReading | read-only | mandatory | The nominal temperature reading of the temperature monitoredby this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.7 | Columna55MonitoredTemperatureNormalMaximum | read-only | mandatory | The normal maximum temperature reading of the temperaturemonitor d by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.8 | Columna55MonitoredTemperatureNormalMinimum | read-only | mandatory | The normal minimum temperature reading of the temperaturemonitor d by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.9 | Columna55TemperatureProbeMaximum | read-only | mandatory | The maximum temperature reading specified to be readable bythis probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.10 | Columna55TemperatureProbeMinimum | read-only | mandatory | The minimum temperature reading specified to be readable bythis probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.11 | Columna55TemperatureLowerThreshold-Non-critica | read-write | mandatory | The lower non-critical threshold for the temperature reading setby the user, in 1/10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.12 | Columna55TemperatureUpperThreshold-Non-critica | read-write | mandatory | The upper non-critical threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.13 | Columna55TemperatureLowerThreshold-Critical | read-write | mandatory | The lower critical threshold for the temperature probe, in 1/10 degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.14 | Columna55TemperatureUpperThreshold-Critical | read-write | mandatory | The upper critical threshold for the temperature probe, in /10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.15 | Columna55TemperatureLowerThreshold-Non-recover | read-write | mandatory | The lower non-recoverable threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.16 | Columna55TemperatureUpperThreshold-Non-recover | read-write | mandatory | The upper non-recoverable threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.17 | Columna55TemperatureProbeResolution | read-write | mandatory | The resolution for the reading from this temperature probe, in tenths of 1/10th degrees C. '0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.18 | Columna55TemperatureProbeTolerance | read-write | mandatory | The tolerance for the reading from this temperature probe, in plus/minus 1/10 degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.19 | Columna55TemperatureProbeAccuracy | read-write | mandatory | The accuracy for the reading from this temperature probe, in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown' or'unsupport d'. |
| 1.3.6.1.4.1.412.2.4.54.1.20 | Columna55FruGroupIndex | read-only | mandatory | Index into the FRU table. A value of -1 indicatesthat this device is not an FRU. |
| 1.3.6.1.4.1.412.2.4.54.1.21 | Columna55OperationalGroupIndex | read-only | mandatory | Index into the Operational State table |
| 1.3.6.1.4.1.412.2.4.63 | TabletPhysicalContainerGlobalTable | not-accessible | mandatory | This group of attributes describes the fields in a row ofthe Physical Container Global Table. This table lists all ofthe containers (e.g. chassis, sub-chassis,… |
| 1.3.6.1.4.1.412.2.4.63.0 | NodetPhysicalContainerGlobalTableTraps | |||
| 1.3.6.1.4.1.412.2.4.63.0.6 | Notificationnotification1ForPhysicalContainer | current | Container Security Breached | |
| 1.3.6.1.4.1.412.2.4.63.0.256 | Notificationnotification2ForPhysicalContainer | current | Container Secured | |
| 1.3.6.1.4.1.412.2.4.63.1 | RowePhysicalContainerGlobalTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.63.1.1 | Columna64ContainerOrChassisType | read-only | mandatory | The type of container or chassis. |
| 1.3.6.1.4.1.412.2.4.63.1.2 | Columna64AssetTag | read-write | mandatory | The Container asset tag string.This asset tag string is writeabl by the system administrator. |
| 1.3.6.1.4.1.412.2.4.63.1.3 | Columna64ChassisLockPresent | read-only | mandatory | If true, a chassis lock is present on the Container. |
| 1.3.6.1.4.1.412.2.4.63.1.4 | Columna64BootupState | read-only | mandatory | The current state of this system when it booted. |
| 1.3.6.1.4.1.412.2.4.63.1.5 | Columna64PowerState | read-only | mandatory | The current state of the power supply for this system. |
| 1.3.6.1.4.1.412.2.4.63.1.6 | Columna64ThermalState | read-only | mandatory | The current thermal state of this Container. |
| 1.3.6.1.4.1.412.2.4.63.1.7 | Columna64FruGroupIndex | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a … |
| 1.3.6.1.4.1.412.2.4.63.1.8 | Columna64OperationalGroupIndex | read-only | mandatory | The index into the Operational State table for this deviceif applicable. |
| 1.3.6.1.4.1.412.2.4.63.1.9 | Columna64ContainerIndex | read-only | mandatory | A unique index for the Physical Container in Physical Container Global Table. |
| 1.3.6.1.4.1.412.2.4.63.1.10 | Columna64ContainerName | read-write | mandatory | This is any 64-octet long name that the user orsystem administra or wishes to give this specific physical container. |
| 1.3.6.1.4.1.412.2.4.63.1.11 | Columna64ContainerLocation | read-write | mandatory | This attribute is a string name for the location of thecontainer This attribute is Read-Write and may be set to any appropriate value by the user. The string m… |
| 1.3.6.1.4.1.412.2.4.63.1.12 | Columna64ContainerSecurityStatus | read-only | mandatory | This attribute describes whether the Container is physically secure or not. This includes the state of the door lock, or the boot devices or the keyboard or mo… |
| 1.3.6.1.4.1.412.2.4.64 | TabletBusGlobalTable | not-accessible | mandatory | This global table has one entry for each of the Busesin this Component. The unique ID provided to each bus is the index into this table. |
| 1.3.6.1.4.1.412.2.4.64.1 | RoweBusGlobalTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.64.1.1 | Columna128BusId | read-only | mandatory | Unique index provided to each Bus in this Component and usedas a key into the Bus Global Table. |
| 1.3.6.1.4.1.412.2.4.64.1.2 | Columna128BusType | read-only | mandatory | The type of the bus being described by this entry in the BusGlobal Table. |
| 1.3.6.1.4.1.412.2.4.65 | TabletPhysicalExpansionSitesTable | not-accessible | mandatory | This global table describes all of the expansion sites in this expandablecomponent in the system. The unique index of each expansion site is the key into thist… |
| 1.3.6.1.4.1.412.2.4.65.1 | RowePhysicalExpansionSitesTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.65.1.1 | Columna129ExpansionSiteIndex | read-only | mandatory | The unique integer index into Physical Expansion Sites table. |
| 1.3.6.1.4.1.412.2.4.65.1.2 | Columna129ExpansionSiteType | read-only | mandatory | This attribute describes the type of expansion sitethat is being defined by this entry in the Physical Expansion SitesTable. |
| 1.3.6.1.4.1.412.2.4.65.1.3 | Columna129VirtualExpansionSite | read-only | mandatory | This attribute indicates whether this is a 'virtual'expansion site or not. A virtual expansion site is one that ispermanently occupied because of the level of … |
| 1.3.6.1.4.1.412.2.4.65.1.4 | Columna129ExpansionSiteName | read-only | mandatory | Name chosen by the vendor of this component toname this particul r expansion site within this component, e.g. 'Slot 6', 'DriveBay 1'. |
| 1.3.6.1.4.1.412.2.4.65.1.5 | Columna129ExpansionSiteDescription | read-only | mandatory | This is a vendor-settable string that describes theexpandable site in whatever way is desired. |
| 1.3.6.1.4.1.412.2.4.65.1.6 | Columna129ExpansionSiteCurrentlyOccupied | read-only | mandatory | A boolean whose value indicates whether thisExpansion Site is currently occupied or not. |
| 1.3.6.1.4.1.412.2.4.66 | TabletPowerUnitGlobalTable | not-accessible | mandatory | This global table describes all of the Power Units in thissystem component. The unique index of each Power Unit is the keyinto this table. A Power Unit is comp… |
| 1.3.6.1.4.1.412.2.4.66.0 | NodetPowerUnitGlobalTableTraps | |||
| 1.3.6.1.4.1.412.2.4.66.0.1 | Notificationnotification1ForPowerUnit | current | Power Unit Redundancy Lost | |
| 1.3.6.1.4.1.412.2.4.66.0.2 | Notificationnotification2ForPowerUnit | current | Power Unit Redundancy Regained | |
| 1.3.6.1.4.1.412.2.4.66.0.3 | Notificationnotification3ForPowerUnit | current | Power Unit Redundancy Degraded | |
| 1.3.6.1.4.1.412.2.4.66.0.4 | Notificationnotification4ForPowerUnit | current | Power Unit VA Shutdown Condition Cleared | |
| 1.3.6.1.4.1.412.2.4.66.0.5 | Notificationnotification5ForPowerUnit | current | Power Unit VA Shutdown Limit Exceeded | |
| 1.3.6.1.4.1.412.2.4.66.1 | RowePowerUnitGlobalTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.66.1.1 | Columna67PowerUnitIndex | read-only | mandatory | The unique index given to each Power Unit being describedby this table. This unique index is the key into this table. |
| 1.3.6.1.4.1.412.2.4.66.1.2 | Columna67PowerUnitRedundancyStatus | read-only | mandatory | Gives the redundancy status of the Power Unit.'Fully Redundant' means that all of the configured redundancy is stillavailable; 'Degraded Redundancy' means that… |
| 1.3.6.1.4.1.412.2.4.67 | TabletCoolingUnitGlobalTable | not-accessible | mandatory | This global table describes all of the Cooling Units in this system component. The unique index of each Cooling Unit is a key into this table. A Cooling Unit i… |
| 1.3.6.1.4.1.412.2.4.67.1 | RoweCoolingUnitGlobalTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.67.1.1 | Columna28CoolingUnitIndex | read-only | mandatory | The unique index given to each Cooling Unit being described by this table. This unique index is the key into this table. |
| 1.3.6.1.4.1.412.2.4.67.1.2 | Columna28CoolingUnitStatus | read-only | mandatory | Gives the redundancy status of the Cooling Unit. 'Fully Redundan ' means that all of the configured redundancy is still available; 'Degraded Redundancy' means … |
| 1.3.6.1.4.1.412.2.4.100 | TabletEventGenerationForProcessor | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.100.1 | RoweEventGenerationForProcessor | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.100.1.1 | Columna100EventType | read-only | mandatory | The type of event that has occurred. |
| 1.3.6.1.4.1.412.2.4.100.1.2 | Columna100EventSeverity | read-only | mandatory | The severity of this event. |
| 1.3.6.1.4.1.412.2.4.100.1.3 | Columna100IsEventState-based | read-only | mandatory | The value of this attributedetermines whether the Event being reportedis a state-based Event or not. If the valueof this attribute is TRUE then the Event issta… |
| 1.3.6.1.4.1.412.2.4.100.1.4 | Columna100EventStateKey | read-only | mandatory | A unique, single integer key into the EventState group if this is a state-based Event.If this is not a state-based Event then thisthis attribute's value is not… |
| 1.3.6.1.4.1.412.2.4.100.1.5 | Columna100AssociatedGroup | read-only | mandatory | The class name of the group that is associatedwith the events defined in this EventGeneration group. |
| 1.3.6.1.4.1.412.2.4.100.1.6 | Columna100EventSystem | read-only | mandatory | The major functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.412.2.4.100.1.7 | Columna100EventSubsystem | read-only | mandatory | The minor functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.412.2.4.100.1.9 | Columna100IsInstanceDataPresent | read-only | mandatory | Indicates whether the second event block containsinstance-specif c data. |
| 1.3.6.1.4.1.412.2.4.100.1.10 | Columna100EventMessage | read-only | mandatory | Auxillary information releated to the eventThis text contains the name of the Probe |
| 1.3.6.1.4.1.412.2.4.104 | TabletEventGenerationForPowerSupply | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.104.1 | RoweEventGenerationForPowerSupply | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.104.1.1 | Columna104EventType | read-only | mandatory | The type of event that has occurred. |
| 1.3.6.1.4.1.412.2.4.104.1.2 | Columna104EventSeverity | read-only | mandatory | The severity of this event. |
| 1.3.6.1.4.1.412.2.4.104.1.3 | Columna104IsEventState-based | read-only | mandatory | The value of this attributedetermines whether the Event being reportedis a state-based Event or not. If the valueof this attribute is TRUE then the Event issta… |
| 1.3.6.1.4.1.412.2.4.104.1.4 | Columna104EventStateKey | read-only | mandatory | A unique, single integer key into the EventState group if this is a state-based Event.If this is not a state-based Event then thisthis attribute's value is not… |
| 1.3.6.1.4.1.412.2.4.104.1.5 | Columna104AssociatedGroup | read-only | mandatory | The class name of the group that is associatedwith the events defined in this EventGeneration group. |
| 1.3.6.1.4.1.412.2.4.104.1.6 | Columna104EventSystem | read-only | mandatory | The major functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.412.2.4.104.1.7 | Columna104EventSubsystem | read-only | mandatory | The minor functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.412.2.4.104.1.9 | Columna104IsInstanceDataPresent | read-only | mandatory | Indicates whether the second event block containsinstance-specif c data. |
| 1.3.6.1.4.1.412.2.4.104.1.10 | Columna104EventMessage | read-only | mandatory | Auxillary information releated to the eventThis text contains the name of the Probe |
| 1.3.6.1.4.1.412.2.4.108 | TabletEventGenerationForPhysicalMemory | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.108.1 | RoweEventGenerationForPhysicalMemory | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.108.1.1 | Columna108EventType | read-only | mandatory | The type of event that has occurred. |
| 1.3.6.1.4.1.412.2.4.108.1.2 | Columna108EventSeverity | read-only | mandatory | The severity of this event. |
| 1.3.6.1.4.1.412.2.4.108.1.3 | Columna108IsEventState-based | read-only | mandatory | The value of this attributedetermines whether the Event being reportedis a state-based Event or not. If the valueof this attribute is TRUE then the Event issta… |
| 1.3.6.1.4.1.412.2.4.108.1.4 | Columna108EventStateKey | read-only | mandatory | A unique, single integer key into the EventState group if this is a state-based Event.If this is not a state-based Event then thisthis attribute's value is not… |
| 1.3.6.1.4.1.412.2.4.108.1.5 | Columna108AssociatedGroup | read-only | mandatory | The class name of the group that is associatedwith the events defined in this EventGeneration group. |
| 1.3.6.1.4.1.412.2.4.108.1.6 | Columna108EventSystem | read-only | mandatory | The major functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.412.2.4.108.1.7 | Columna108EventSubsystem | read-only | mandatory | The minor functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.412.2.4.108.1.9 | Columna108IsInstanceDataPresent | read-only | mandatory | Indicates whether the second event block containsinstance-specif c data. |
| 1.3.6.1.4.1.412.2.4.108.1.10 | Columna108EventMessage | read-only | mandatory | Auxillary information releated to the eventThis text contains the name of the Probe |
| 1.3.6.1.4.1.412.2.4.113 | TabletEventGenerationForVoltageProbe | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.113.1 | RoweEventGenerationForVoltageProbe | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.113.1.1 | Columna113EventType | read-only | mandatory | The type of event that has occurred. |
| 1.3.6.1.4.1.412.2.4.113.1.2 | Columna113EventSeverity | read-only | mandatory | The severity of this event. |
| 1.3.6.1.4.1.412.2.4.113.1.3 | Columna113IsEventState-based | read-only | mandatory | The value of this attributedetermines whether the Event being reportedis a state-based Event or not. If the valueof this attribute is TRUE then the Event issta… |
| 1.3.6.1.4.1.412.2.4.113.1.4 | Columna113EventStateKey | read-only | mandatory | A unique, single integer key into the EventState group if this is a state-based Event.If this is not a state-based Event then thisthis attribute's value is not… |
| 1.3.6.1.4.1.412.2.4.113.1.5 | Columna113AssociatedGroup | read-only | mandatory | The class name of the group that is associatedwith the events defined in this EventGeneration group. |
| 1.3.6.1.4.1.412.2.4.113.1.6 | Columna113EventSystem | read-only | mandatory | The major functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.412.2.4.113.1.7 | Columna113EventSubsystem | read-only | mandatory | The minor functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.412.2.4.113.1.9 | Columna113IsInstanceDataPresent | read-only | mandatory | Indicates whether the second event block containsinstance-specif c data. |
| 1.3.6.1.4.1.412.2.4.113.1.10 | Columna113EventMessage | read-only | mandatory | Auxillary information releated to the eventThis text contains the name of the Probe |
| 1.3.6.1.4.1.412.2.4.114 | TabletEventGenerationForTemperatureProbe | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.114.1 | RoweEventGenerationForTemperatureProbe | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.114.1.1 | Columna114EventType | read-only | mandatory | The type of event that has occurred. |
| 1.3.6.1.4.1.412.2.4.114.1.2 | Columna114EventSeverity | read-only | mandatory | The severity of this event. |
| 1.3.6.1.4.1.412.2.4.114.1.3 | Columna114IsEventState-based | read-only | mandatory | The value of this attributedetermines whether the Event being reportedis a state-based Event or not. If the valueof this attribute is TRUE then the Event issta… |
| 1.3.6.1.4.1.412.2.4.114.1.4 | Columna114EventStateKey | read-only | mandatory | A unique, single integer key into the EventState group if this is a state-based Event.If this is not a state-based Event then thisthis attribute's value is not… |
| 1.3.6.1.4.1.412.2.4.114.1.5 | Columna114AssociatedGroup | read-only | mandatory | The class name of the group that is associatedwith the events defined in this EventGeneration group. |
| 1.3.6.1.4.1.412.2.4.114.1.6 | Columna114EventSystem | read-only | mandatory | The major functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.412.2.4.114.1.7 | Columna114EventSubsystem | read-only | mandatory | The minor functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.412.2.4.114.1.9 | Columna114IsInstanceDataPresent | read-only | mandatory | Indicates whether the second event block containsinstance-specif c data. |
| 1.3.6.1.4.1.412.2.4.114.1.10 | Columna114EventMessage | read-only | mandatory | Auxillary information releated to the eventThis text contains the name of the Probe |
| 1.3.6.1.4.1.412.2.4.116 | TabletEventGenerationForPhysicalContainer | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.116.1 | RoweEventGenerationForPhysicalContainer | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.116.1.1 | Columna116EventType | read-only | mandatory | The type of event that has occurred. |
| 1.3.6.1.4.1.412.2.4.116.1.2 | Columna116EventSeverity | read-only | mandatory | The severity of this event. |
| 1.3.6.1.4.1.412.2.4.116.1.3 | Columna116IsEventState-based | read-only | mandatory | The value of this attributedetermines whether the Event being reportedis a state-based Event or not. If the valueof this attribute is TRUE then the Event issta… |
| 1.3.6.1.4.1.412.2.4.116.1.4 | Columna116EventStateKey | read-only | mandatory | A unique, single integer key into the EventState group if this is a state-based Event.If this is not a state-based Event then thisthis attribute's value is not… |
| 1.3.6.1.4.1.412.2.4.116.1.5 | Columna116AssociatedGroup | read-only | mandatory | The class name of the group that is associatedwith the events defined in this EventGeneration group. |
| 1.3.6.1.4.1.412.2.4.116.1.6 | Columna116EventSystem | read-only | mandatory | The major functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.412.2.4.116.1.7 | Columna116EventSubsystem | read-only | mandatory | The minor functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.412.2.4.116.1.9 | Columna116IsInstanceDataPresent | read-only | mandatory | Indicates whether the second event block containsinstance-specif c data. |
| 1.3.6.1.4.1.412.2.4.116.1.10 | Columna116EventMessage | read-only | mandatory | Auxillary information releated to the eventThis text contains the name of the Probe |
| 1.3.6.1.4.1.412.2.4.122 | TabletPointingDevice | not-accessible | mandatory | This group defines the characteristics of a pointing device. |
| 1.3.6.1.4.1.412.2.4.122.1 | RowePointingDevice | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.122.1.1 | Columna122PointingDeviceType | read-only | mandatory | The type of this Pointing Device. |
| 1.3.6.1.4.1.412.2.4.122.1.2 | Columna122PointingDeviceInterface | read-only | mandatory | The interface type of this Pointing Device. |
| 1.3.6.1.4.1.412.2.4.122.1.3 | Columna122PointingDeviceIrq | read-only | mandatory | The IRQ number used by this Pointing Device. |
| 1.3.6.1.4.1.412.2.4.122.1.4 | Columna122PointingDeviceButtons | read-only | mandatory | The number of Pointing Device buttons on this Pointing Device. |
| 1.3.6.1.4.1.412.2.4.122.1.5 | Columna122PointingDevicePortName | read-only | mandatory | The name of the port currently being used by this Pointing Device. |
| 1.3.6.1.4.1.412.2.4.122.1.6 | Columna122PointingDeviceDriverName | read-only | mandatory | The name of the Pointing Device driver. |
| 1.3.6.1.4.1.412.2.4.122.1.7 | Columna122PointingDeviceDriverVersion | read-only | mandatory | The version number of the Pointing Device driver. |
| 1.3.6.1.4.1.412.2.4.122.1.8 | Columna122FruGroupIndex | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a … |
| 1.3.6.1.4.1.412.2.4.122.1.9 | Columna122OperationalGroupIndex | read-only | mandatory | The index into the Operational State table for this device. |
| 1.3.6.1.4.1.412.2.4.122.1.10 | Columna122SecuritySettings | read-only | mandatory | Enum describing the current hardware security settings on this device. |
| 1.3.6.1.4.1.412.2.4.140 | TabletEventGenerationForCoolingDevice | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.140.1 | RoweEventGenerationForCoolingDevice | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.140.1.1 | Columna140EventType | read-only | mandatory | The type of event that has occurred. |
| 1.3.6.1.4.1.412.2.4.140.1.2 | Columna140EventSeverity | read-only | mandatory | The severity of this event. |
| 1.3.6.1.4.1.412.2.4.140.1.3 | Columna140IsEventState-based | read-only | mandatory | The value of this attributedetermines whether the Event being reportedis a state-based Event or not. If the valueof this attribute is TRUE then the Event issta… |
| 1.3.6.1.4.1.412.2.4.140.1.4 | Columna140EventStateKey | read-only | mandatory | A unique, single integer key into the EventState group if this is a state-based Event.If this is not a state-based Event then thisthis attribute's value is not… |
| 1.3.6.1.4.1.412.2.4.140.1.5 | Columna140AssociatedGroup | read-only | mandatory | The class name of the group that is associatedwith the events defined in this EventGeneration group. |
| 1.3.6.1.4.1.412.2.4.140.1.6 | Columna140EventSystem | read-only | mandatory | The major functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.412.2.4.140.1.7 | Columna140EventSubsystem | read-only | mandatory | The minor functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.412.2.4.201 | TabletEventGenerationForPowerUnit | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.201.1 | RoweEventGenerationForPowerUnit | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.201.1.1 | Columna201EventType | read-only | mandatory | The type of event that has occurred. |
| 1.3.6.1.4.1.412.2.4.201.1.2 | Columna201EventSeverity | read-only | mandatory | The severity of this event. |
| 1.3.6.1.4.1.412.2.4.201.1.3 | Columna201IsEventState-based | read-only | mandatory | The value of this attributedetermines whether the Event being reportedis a state-based Event or not. If the valueof this attribute is TRUE then the Event issta… |
| 1.3.6.1.4.1.412.2.4.201.1.4 | Columna201EventStateKey | read-only | mandatory | A unique, single integer key into the EventState group if this is a state-based Event.If this is not a state-based Event then thisthis attribute's value is not… |
| 1.3.6.1.4.1.412.2.4.201.1.5 | Columna201AssociatedGroup | read-only | mandatory | The class name of the group that is associatedwith the events defined in this EventGeneration group. |
| 1.3.6.1.4.1.412.2.4.201.1.6 | Columna201EventSystem | read-only | mandatory | The major functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.412.2.4.201.1.7 | Columna201EventSubsystem | read-only | mandatory | The minor functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.412.2.4.201.1.9 | Columna201IsInstanceDataPresent | read-only | mandatory | Indicates whether the second event block containsinstance-specif c data. |
| 1.3.6.1.4.1.412.2.4.201.1.10 | Columna201EventMessage | read-only | mandatory | Auxillary information releated to the eventThis text contains the name of the Probe |
| 1.3.6.1.4.1.412.2.4.205 | TabletEventGenerationForSystemSlots | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.205.1 | RoweEventGenerationForSystemSlots | not-accessible | mandatory | |
| 1.3.6.1.4.1.412.2.4.205.1.1 | Columna205EventType | read-only | mandatory | The type of event that has occurred. |
| 1.3.6.1.4.1.412.2.4.205.1.2 | Columna205EventSeverity | read-only | mandatory | The severity of this event. |
| 1.3.6.1.4.1.412.2.4.205.1.3 | Columna205IsEventState-based | read-only | mandatory | The value of this attributedetermines whether the Event being reportedis a state-based Event or not. If the valueof this attribute is TRUE then the Event issta… |
| 1.3.6.1.4.1.412.2.4.205.1.4 | Columna205EventStateKey | read-only | mandatory | A unique, single integer key into the EventState group if this is a state-based Event.If this is not a state-based Event then thisthis attribute's value is not… |
| 1.3.6.1.4.1.412.2.4.205.1.5 | Columna205AssociatedGroup | read-only | mandatory | The class name of the group that is associatedwith the events defined in this EventGeneration group. |
| 1.3.6.1.4.1.412.2.4.205.1.6 | Columna205EventSystem | read-only | mandatory | The major functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.412.2.4.205.1.7 | Columna205EventSubsystem | read-only | mandatory | The minor functional aspect of the productcausing the fault. |
| 1.3.6.1.4.1.412.2.4.205.1.9 | Columna205IsInstanceDataPresent | read-only | mandatory | Indicates whether the second event block containsinstance-specif c data. |
| 1.3.6.1.4.1.412.2.4.205.1.10 | Columna205EventMessage | read-only | mandatory | Auxillary information releated to the eventThis text contains the name of the Probe |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DmiComponentIndex | INTEGER | ||
| DmiDate | OCTET STRING (SIZE (28)) | ||
| DmiInteger | INTEGER | ||
| DmiInteger64 | INTEGER (-18446744073709551615..18446744073709551615) | ||
| DmiOctetstring | OCTET STRING |