IOMMIB
209 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.795 | Nodeadaptec | |||
| 1.3.6.1.4.1.795.12 | NodestorageManager | |||
| 1.3.6.1.4.1.795.12.2 | NodeioManager | |||
| 1.3.6.1.4.1.795.12.2.1 | NodemibRevision | |||
| 1.3.6.1.4.1.795.12.2.1.1 | ScalarrevMajor | read-only | mandatory | The major number of the revision of the IOManager MIB. |
| 1.3.6.1.4.1.795.12.2.1.2 | ScalarrevMinor | read-only | mandatory | The minor number of the revision of the IOManager MIB. |
| 1.3.6.1.4.1.795.12.2.2 | NodestorageDevice | |||
| 1.3.6.1.4.1.795.12.2.2.1 | TabledeviceTable | not-accessible | mandatory | A list of storage devices. |
| 1.3.6.1.4.1.795.12.2.2.1.1 | RowdevEntry | not-accessible | mandatory | A storage device entry. |
| 1.3.6.1.4.1.795.12.2.2.1.1.1 | ColumndevIndex | read-only | mandatory | A unique index value for each storage device beginning with 1. |
| 1.3.6.1.4.1.795.12.2.2.1.1.2 | ColumndevType | read-only | mandatory | The type of this mass storage device. |
| 1.3.6.1.4.1.795.12.2.2.1.1.3 | ColumndevTypeDescr | read-only | mandatory | A longer description of the storage device. For example: 3.5 inch flexible diskette drives using diskettes with a maximum capacity of 1.44MB. |
| 1.3.6.1.4.1.795.12.2.2.1.1.4 | ColumndevSubIdentifier | read-only | mandatory | The sub-identifier for this storage device (e.g., the device's SCSI logical unit number). |
| 1.3.6.1.4.1.795.12.2.2.1.1.5 | ColumndevMediaBlockSize | read-only | mandatory | The size in bytes of the data blocks used on the storage media. If the media block size is unknown or inconsistent then this value shall be zero. |
| 1.3.6.1.4.1.795.12.2.2.1.1.6 | ColumndevFormattedMediaCapacity | read-only | mandatory | The total size in kilobytes of this storage media after it has been formatted. |
| 1.3.6.1.4.1.795.12.2.2.1.1.7 | ColumndevRemovableDevice | read-only | mandatory | If true, then this storage device is removable (e.g.: PCMCIA device). |
| 1.3.6.1.4.1.795.12.2.2.1.1.8 | ColumndevLoaded | read-only | mandatory | If true, then the storage device is loaded. |
| 1.3.6.1.4.1.795.12.2.2.1.1.9 | ColumndevRemovableMedia | read-only | mandatory | If true, then the media in this storage device is removable. |
| 1.3.6.1.4.1.795.12.2.2.1.1.10 | ColumndevMediaLoaded | read-only | mandatory | If true, the media in this storage device is loaded. |
| 1.3.6.1.4.1.795.12.2.2.1.1.11 | ColumndevCompression | read-only | mandatory | If true, the storage device supports compression. |
| 1.3.6.1.4.1.795.12.2.2.1.1.12 | ColumndevEncryption | read-only | mandatory | If true, the storage device supports encryption. |
| 1.3.6.1.4.1.795.12.2.2.1.1.13 | ColumndevReservedSectorsAtBeginning | read-only | mandatory | The number of sectors reserved for system use at the beginning of the storageDevice. |
| 1.3.6.1.4.1.795.12.2.2.1.1.14 | ColumndevReservedSectorsAtEnd | read-only | mandatory | The number of sectors reserved for system use at the end of the storageDevice. |
| 1.3.6.1.4.1.795.12.2.3 | NodestorageController | |||
| 1.3.6.1.4.1.795.12.2.3.1 | TablectlrTable | not-accessible | mandatory | A list of storage controllers. |
| 1.3.6.1.4.1.795.12.2.3.1.1 | RowctlrEntry | not-accessible | mandatory | A storage controller entry. |
| 1.3.6.1.4.1.795.12.2.3.1.1.1 | ColumnctlrIndex | read-only | mandatory | A unique index value for each storage controller beginning with 1. |
| 1.3.6.1.4.1.795.12.2.3.1.1.2 | ColumnctlrDescription | read-only | mandatory | Name, version, and revision level of the storage controller. |
| 1.3.6.1.4.1.795.12.2.3.1.1.3 | ColumnctlrProtectionManagement | read-only | mandatory | Indicates whether or not the controller provides redundancy or protection against device failures. |
| 1.3.6.1.4.1.795.12.2.3.1.1.4 | ColumnctlrBusMaster | read-only | mandatory | If TRUE, then this storage controller is the bus master. |
| 1.3.6.1.4.1.795.12.2.3.1.1.5 | ColumnctlrSecondsSinceLastPowerUp | read-only | mandatory | The number of seconds that have passed since this controller was last powered on. |
| 1.3.6.1.4.1.795.12.2.3.1.1.6 | ColumnctlrPCIValidityMap | read-only | mandatory | Bit field specifying which of the following PCI object values contain valid information. A bit value equal to 1 means the corresponding data value is valid. 0x… |
| 1.3.6.1.4.1.795.12.2.3.1.1.7 | ColumnctlrPCIDeviceId | read-only | mandatory | The PCI device ID of this controller. |
| 1.3.6.1.4.1.795.12.2.3.1.1.8 | ColumnctlrPCIVendorId | read-only | mandatory | The PCI vendor ID of this controller. |
| 1.3.6.1.4.1.795.12.2.3.1.1.9 | ColumnctlrPCIBus | read-only | mandatory | The PCI bus number of this controller. |
| 1.3.6.1.4.1.795.12.2.3.1.1.10 | ColumnctlrPCIDevice | read-only | mandatory | The PCI device number of this controller. |
| 1.3.6.1.4.1.795.12.2.3.1.1.11 | ColumnctlrPCIFunction | read-only | mandatory | The PCI function of this controller. |
| 1.3.6.1.4.1.795.12.2.3.1.1.12 | ColumnctlrBaseMemoryAddress | read-only | mandatory | The base memory address on this controller. |
| 1.3.6.1.4.1.795.12.2.4 | Nodeenclosure | |||
| 1.3.6.1.4.1.795.12.2.4.1 | TableenclTable | not-accessible | mandatory | A list of enclosures. |
| 1.3.6.1.4.1.795.12.2.4.1.1 | RowenclEntry | not-accessible | mandatory | An enclosure entry. |
| 1.3.6.1.4.1.795.12.2.4.1.1.1 | ColumnenclIndex | read-only | mandatory | A unique index value for each enclosure beginning with 1. |
| 1.3.6.1.4.1.795.12.2.4.1.1.2 | ColumnenclType | read-only | mandatory | The type of the enclosure. |
| 1.3.6.1.4.1.795.12.2.4.1.1.3 | ColumnenclDescription | read-only | mandatory | Description of the enclosure. |
| 1.3.6.1.4.1.795.12.2.5 | NodebusPort | |||
| 1.3.6.1.4.1.795.12.2.5.1 | TablebusPortTable | not-accessible | mandatory | A list of bus ports. |
| 1.3.6.1.4.1.795.12.2.5.1.1 | RowbusPortEntry | not-accessible | mandatory | A bus port entry. |
| 1.3.6.1.4.1.795.12.2.5.1.1.1 | ColumnportIndex | read-only | mandatory | A unique index value for each bus port beginning with 1. |
| 1.3.6.1.4.1.795.12.2.5.1.1.2 | ColumnportProtocol | read-only | mandatory | The protocol describing the electrical characteristics of the Bus Port. If 'Other' is used, then the Protocol Description attribute shall be used. |
| 1.3.6.1.4.1.795.12.2.5.1.1.3 | ColumnportProtocolDescription | read-only | mandatory | Additional description of the protocol describe above. |
| 1.3.6.1.4.1.795.12.2.5.1.1.4 | ColumnportSignalCharacteristics | read-only | mandatory | The electrical characteristics of the Bus Port being described. |
| 1.3.6.1.4.1.795.12.2.5.1.1.5 | ColumnportAddressDescriptor | read-only | mandatory | The address descriptor for this bus port. For example the PCI slot and ID. |
| 1.3.6.1.4.1.795.12.2.5.1.1.6 | ColumnportIsochronous | read-only | mandatory | Indicates whether or not the bus port supports isochronous transfers. |
| 1.3.6.1.4.1.795.12.2.5.1.1.7 | ColumnportMaximumWidth | read-only | mandatory | The maximum width, in bits, of this Bus Port's data path. A value of 1 should be used for serial. |
| 1.3.6.1.4.1.795.12.2.5.1.1.8 | ColumnportMaximumTransferRate | read-only | mandatory | The theoretical maximum transfer rate, in millions of bytes per second, that this Bus Port is capable of achieving under ideal conditions. A value of zero shou… |
| 1.3.6.1.4.1.795.12.2.5.1.1.9 | ColumnportMaximumAttachments | read-only | mandatory | The maximum number of directly addressable entities supported by this bus port's protocol. |
| 1.3.6.1.4.1.795.12.2.5.1.1.10 | ColumnportConnectorType | read-only | mandatory | Describes how options (cards, devices, etc.) physically connect to this port bus. If 'Other' is used, then the connector type description attribute shall be us… |
| 1.3.6.1.4.1.795.12.2.5.1.1.11 | ColumnportConnectorTypeDescription | read-only | mandatory | Additional description of the connector described above. |
| 1.3.6.1.4.1.795.12.2.5.1.1.12 | ColumnportConnectorGender | read-only | mandatory | Indicates the gender of the connector described above. |
| 1.3.6.1.4.1.795.12.2.6 | NodeaggregatePhysicalExtent | |||
| 1.3.6.1.4.1.795.12.2.6.1 | TableaggregatePExtentTable | not-accessible | mandatory | A list of aggregate physical extent entries. |
| 1.3.6.1.4.1.795.12.2.6.1.1 | RowaggregatePExtentEntry | not-accessible | mandatory | An aggregate P Extent entry. |
| 1.3.6.1.4.1.795.12.2.6.1.1.1 | ColumnaggPExtentIndex | read-only | mandatory | A unique index value for each aggregate physical extent beginning with 1. |
| 1.3.6.1.4.1.795.12.2.6.1.1.2 | ColumnaggPExtentBlocks | read-only | mandatory | The total number of consecutive blocks (including check data blocks) contained in the aggregate p extent. The block size is determined by the storage device as… |
| 1.3.6.1.4.1.795.12.2.6.1.1.3 | ColumnaggPExtentCheckDataBlocks | read-only | mandatory | The number of blocks contained in the aggregate p extent to be used as check data. If the aggregate p extent is available, then this value shall be zero. |
| 1.3.6.1.4.1.795.12.2.7 | NodeaggregateProtectedSpace | |||
| 1.3.6.1.4.1.795.12.2.7.1 | TableaggregatePsExtentTable | not-accessible | mandatory | A list of aggregate protected space extents. |
| 1.3.6.1.4.1.795.12.2.7.1.1 | RowaggregatePsExtentEntry | not-accessible | mandatory | An aggregate Ps extent entry. |
| 1.3.6.1.4.1.795.12.2.7.1.1.1 | ColumnaggPsExtentIndex | read-only | mandatory | A unique index value for each aggregate ps extent beginning with 1. |
| 1.3.6.1.4.1.795.12.2.7.1.1.2 | ColumnaggPsExtentBlocks | read-only | mandatory | The total number of user data blocks that is both located on a single storage device and part or all of a single volume set. The block size is determined by th… |
| 1.3.6.1.4.1.795.12.2.8 | NodevolumeSet | |||
| 1.3.6.1.4.1.795.12.2.8.1 | TablevolumeSetTable | not-accessible | mandatory | A list of volume sets. |
| 1.3.6.1.4.1.795.12.2.8.1.1 | RowvolumeSetEntry | not-accessible | mandatory | A volume set entry. |
| 1.3.6.1.4.1.795.12.2.8.1.1.1 | ColumnvolIndex | read-only | mandatory | A unique index value for each volume set beginning with 1. |
| 1.3.6.1.4.1.795.12.2.8.1.1.2 | ColumnvolName | read-only | mandatory | The name of the volume set. |
| 1.3.6.1.4.1.795.12.2.8.1.1.3 | ColumnvolCapacity | read-only | mandatory | The total size in Mbytes of the user data space of this volume set. |
| 1.3.6.1.4.1.795.12.2.8.1.1.4 | ColumnvolPSExtentStripeLength | read-only | mandatory | The number of ps_extents which form a user data stripe. This value shall be zero except when the ps_extent group is used. |
| 1.3.6.1.4.1.795.12.2.8.1.1.5 | ColumnvolPSExtentInterleaveDepth | read-only | mandatory | The number of ps_extents to stripe as a collective set. This value shall be zero except when the ps_extent group is used. |
| 1.3.6.1.4.1.795.12.2.8.1.1.6 | ColumnvolActivity | read-only | mandatory | The name of any RAID activities running on this volumeSet. |
| 1.3.6.1.4.1.795.12.2.9 | NodemlvolumeSet | |||
| 1.3.6.1.4.1.795.12.2.9.1 | TablemlvolumeSetTable | not-accessible | mandatory | A list of multilevel volume sets. |
| 1.3.6.1.4.1.795.12.2.9.1.1 | RowmlvolumeSetEntry | not-accessible | mandatory | A multilevel volume set entry. |
| 1.3.6.1.4.1.795.12.2.9.1.1.1 | ColumnmlvolIndex | read-only | mandatory | A unique index value for each multilevel volume set beginning with 1. |
| 1.3.6.1.4.1.795.12.2.9.1.1.2 | ColumnmlvolName | read-only | mandatory | The name of the multilevel volume set. |
| 1.3.6.1.4.1.795.12.2.9.1.1.3 | ColumnmlvolCapacity | read-only | mandatory | The total size in Mbytes of the user data space of this multilevel volume set. |
| 1.3.6.1.4.1.795.12.2.9.1.1.4 | ColumnmlvolActivity | read-only | mandatory | The name of any RAID activities running on this mlvolumeSet. |
| 1.3.6.1.4.1.795.12.2.9.1.1.5 | ColumnmlvolRaidType | read-only | mandatory | The RAID type of this mlvolumeSet. |
| 1.3.6.1.4.1.795.12.2.10 | NoderedundancyGroup | |||
| 1.3.6.1.4.1.795.12.2.10.1 | TableredundancyGroupTable | not-accessible | mandatory | A list of redundancy groups. |
| 1.3.6.1.4.1.795.12.2.10.1.1 | RowredundancyGroupEntry | not-accessible | mandatory | A redundancy group entry. |
| 1.3.6.1.4.1.795.12.2.10.1.1.1 | ColumnredundancyIndex | read-only | mandatory | A unique index value for each redundancy group beginning with 1. |
| 1.3.6.1.4.1.795.12.2.10.1.1.2 | ColumnredundancyType | read-only | mandatory | This field specifies the type of redundancy formed. |
| 1.3.6.1.4.1.795.12.2.11 | NodeworldWideIds | |||
| 1.3.6.1.4.1.795.12.2.11.1 | TableworldWideIdTable | not-accessible | mandatory | A list of worldWideIds. |
| 1.3.6.1.4.1.795.12.2.11.1.1 | RowworldWideIdEntry | not-accessible | mandatory | An worldWideId entry. |
| 1.3.6.1.4.1.795.12.2.11.1.1.1 | ColumnworldWideIdIndex | read-only | mandatory | A unique index value for each WorldWideID beginning with 1. |
| 1.3.6.1.4.1.795.12.2.11.1.1.2 | ColumnworldWideIdType | read-only | mandatory | The type of identifier displayed by the Worldwide Identifier attribute. |
| 1.3.6.1.4.1.795.12.2.11.1.1.3 | ColumnworldWideId | read-only | mandatory | The Worldwide Identifier for this entity. |
| 1.3.6.1.4.1.795.12.2.12 | Nodeassociations | |||
| 1.3.6.1.4.1.795.12.2.12.1 | TableassociationTable | not-accessible | mandatory | A list of associations. |
| 1.3.6.1.4.1.795.12.2.12.1.1 | RowassociationEntry | not-accessible | mandatory | An association entry. |
| 1.3.6.1.4.1.795.12.2.12.1.1.1 | ColumnassociationIndex | read-only | mandatory | A unique index value for each association beginning with 1. |
| 1.3.6.1.4.1.795.12.2.12.1.1.2 | ColumnassociationType | read-only | mandatory | This field specifies the type of the association. It contains one of the following values: 'Physical Organization', 'Logical Organization', 'Logical to Physica… |
| 1.3.6.1.4.1.795.12.2.12.1.1.3 | ColumnassociationObject1 | read-only | mandatory | The authoritative identifier for the first object referenced. |
| 1.3.6.1.4.1.795.12.2.12.1.1.4 | ColumnassociationObject2 | read-only | mandatory | The authoritative identifier for the second object referenced. |
| 1.3.6.1.4.1.795.12.2.13 | NodebusPortAssociations | |||
| 1.3.6.1.4.1.795.12.2.13.1 | TablebusPortAssociationTable | not-accessible | mandatory | A list of bus port associations. |
| 1.3.6.1.4.1.795.12.2.13.1.1 | RowbusPortAssociationEntry | not-accessible | mandatory | A bus port association entry. |
| 1.3.6.1.4.1.795.12.2.13.1.1.1 | ColumnbusPortAssociationIndex | read-only | mandatory | An unique index for each bus port association. This index matches an index in the association table for which bus port association information is available. |
| 1.3.6.1.4.1.795.12.2.13.1.1.2 | ColumnbusPortAssociationNegotiatedSpeed | read-only | mandatory | The maximum burst transfer rate, in millions of bytes, which was negotiated between the two associated bus ports. |
| 1.3.6.1.4.1.795.12.2.13.1.1.3 | ColumnbusPortAssociationNegotiatedWidth | read-only | mandatory | The width, in bits, of the bus ports' data path which was negotiated between the two associated bus ports. |
| 1.3.6.1.4.1.795.12.2.14 | NodecomponentSpareAssociations | |||
| 1.3.6.1.4.1.795.12.2.14.1 | TablecomponentSpareAssociationTable | not-accessible | mandatory | A list of component spare associations. |
| 1.3.6.1.4.1.795.12.2.14.1.1 | RowcomponentSpareAssociationEntry | not-accessible | mandatory | A component spare association entry. |
| 1.3.6.1.4.1.795.12.2.14.1.1.1 | ColumncomponentSpareAssociationIndex | read-only | mandatory | An unique index for each component spare association. This index matches an index in the association table for which component spare association information is… |
| 1.3.6.1.4.1.795.12.2.14.1.1.2 | ColumncomponentSpareFunctioningState | read-only | mandatory | The functioning state of the spares. |
| 1.3.6.1.4.1.795.12.2.15 | NodeoverallObjectStatus | |||
| 1.3.6.1.4.1.795.12.2.15.1 | ScalaroverallStatus | read-only | mandatory | The overall status of objects in the IOManager MIB. Will be set to the worst status of any individual object. |
| 1.3.6.1.4.1.795.12.2.15.2 | ScalarrollupCriticalStatus | read-only | mandatory | The rolled up status of all objects that are in a Critical state. Bit Oriented Field: 0: At least one volumeSet is in a Critical state 1: At least one mlvolume… |
| 1.3.6.1.4.1.795.12.2.15.3 | ScalarrollupWarningStatus | read-only | mandatory | The rolled up status of all objects that are in a Warning state. Bit Oriented Field: 0: At least one volumeSet is in a Warning state 1: At least one mlvolumeSe… |
| 1.3.6.1.4.1.795.12.2.16 | NodeoperationalStates | |||
| 1.3.6.1.4.1.795.12.2.16.1 | TableoperationalStateTable | not-accessible | mandatory | A list of operational state information. |
| 1.3.6.1.4.1.795.12.2.16.1.1 | RowoperationalStateEntry | not-accessible | mandatory | An operational state entry. |
| 1.3.6.1.4.1.795.12.2.16.1.1.1 | ColumnoperationalStateIndex | read-only | mandatory | A unique index value for each operational state table entry beginning with 1. |
| 1.3.6.1.4.1.795.12.2.16.1.1.2 | ColumnoperationalDeviceGroupIndex | read-only | mandatory | This field present for DMI compatibility - unused in SNMP, always 0. |
| 1.3.6.1.4.1.795.12.2.16.1.1.3 | ColumnoperationalStatus | read-only | mandatory | The operational status of the object. |
| 1.3.6.1.4.1.795.12.2.16.1.1.4 | ColumnoperationalUsageState | read-only | mandatory | The usage state of the object. |
| 1.3.6.1.4.1.795.12.2.16.1.1.5 | ColumnoperationalAvailabilityStatus | read-only | mandatory | The availability of the object. |
| 1.3.6.1.4.1.795.12.2.16.1.1.6 | ColumnoperationalAdministrativeStatus | read-only | mandatory | The administrative state of the object. |
| 1.3.6.1.4.1.795.12.2.16.1.1.7 | ColumnoperationalFatalErrorCount | read-only | mandatory | The accumulated Fatal or Non-recoverable error count for the object. |
| 1.3.6.1.4.1.795.12.2.16.1.1.8 | ColumnoperationalMajorErrorCount | read-only | mandatory | The accumulated Major or Critical error count for the object. |
| 1.3.6.1.4.1.795.12.2.16.1.1.9 | ColumnoperationalWarningErrorCount | read-only | mandatory | The accumulated Warning or Non-critical error count for the object. |
| 1.3.6.1.4.1.795.12.2.16.1.1.10 | ColumnoperationalCurrentErrorStatus | read-only | mandatory | This attribute presents the current error status for the object. The most critical error status in effect should be presented. I.e. if a part of the object is … |
| 1.3.6.1.4.1.795.12.2.16.1.1.11 | ColumnoperationalPredictedFailureStatus | read-only | mandatory | Enumeration describing the current Device Predicted Failure Status (e.g.: the S.M.A.R.T. status of the object). |
| 1.3.6.1.4.1.795.12.2.17 | Nodestatistics | |||
| 1.3.6.1.4.1.795.12.2.17.1 | TablestatisticsTable | not-accessible | mandatory | A list of statistics. |
| 1.3.6.1.4.1.795.12.2.17.1.1 | RowstatisticsEntry | not-accessible | mandatory | A statistics entry. |
| 1.3.6.1.4.1.795.12.2.17.1.1.1 | ColumnstatisticsIndex | read-only | mandatory | A unique index value for each statistics table entry beginning with 1. |
| 1.3.6.1.4.1.795.12.2.17.1.1.2 | ColumnstatisticsBlocksRead | read-only | mandatory | The number of 512 byte blocks read from the object. |
| 1.3.6.1.4.1.795.12.2.17.1.1.3 | ColumnstatisticsBlocksWritten | read-only | mandatory | The number of 512 byte blocks written to the object. |
| 1.3.6.1.4.1.795.12.2.17.1.1.4 | ColumnstatisticsReadCommands | read-only | mandatory | The number of read commands issued for the object. |
| 1.3.6.1.4.1.795.12.2.17.1.1.5 | ColumnstatisticsWriteCommands | read-only | mandatory | The number of write commands issued for the object. |
| 1.3.6.1.4.1.795.12.2.17.1.1.6 | ColumnstatisticsReadBucket0 | read-only | mandatory | The number of read commands issued, size < 512 bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.7 | ColumnstatisticsReadBucket1 | read-only | mandatory | The number of read commands issued, 512 bytes <= size < 1K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.8 | ColumnstatisticsReadBucket2 | read-only | mandatory | The number of read commands issued, 1K bytes <= size < 2K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.9 | ColumnstatisticsReadBucket3 | read-only | mandatory | The number of read commands issued, 2K bytes <= size < 4K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.10 | ColumnstatisticsReadBucket4 | read-only | mandatory | The number of read commands issued, 4K bytes <= size < 8K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.11 | ColumnstatisticsReadBucket5 | read-only | mandatory | The number of read commands issued, 8K bytes <= size < 16K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.12 | ColumnstatisticsReadBucket6 | read-only | mandatory | The number of read commands issued, 16K bytes <= size < 32K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.13 | ColumnstatisticsReadBucket7 | read-only | mandatory | The number of read commands issued, 32K bytes <= size < 64K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.14 | ColumnstatisticsReadBucket8 | read-only | mandatory | The number of read commands issued, 64K bytes <= size < 128K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.15 | ColumnstatisticsReadBucket9 | read-only | mandatory | The number of read commands issued, 128K bytes <= size < 256K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.16 | ColumnstatisticsReadBucket10 | read-only | mandatory | The number of read commands issued, 256K bytes <= size < 512K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.17 | ColumnstatisticsReadBucket11 | read-only | mandatory | The number of read commands issued, 512K bytes <= size < 1M bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.18 | ColumnstatisticsReadBucket12 | read-only | mandatory | The number of read commands issued, size >= 1M bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.19 | ColumnstatisticsWriteBucket0 | read-only | mandatory | The number of write commands issued, size < 512 bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.20 | ColumnstatisticsWriteBucket1 | read-only | mandatory | The number of write commands issued, 512 bytes <= size < 1K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.21 | ColumnstatisticsWriteBucket2 | read-only | mandatory | The number of write commands issued, 1K bytes <= size < 2K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.22 | ColumnstatisticsWriteBucket3 | read-only | mandatory | The number of write commands issued, 2K bytes <= size < 4K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.23 | ColumnstatisticsWriteBucket4 | read-only | mandatory | The number of write commands issued, 4K bytes <= size < 8K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.24 | ColumnstatisticsWriteBucket5 | read-only | mandatory | The number of write commands issued, 8K bytes <= size < 16K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.25 | ColumnstatisticsWriteBucket6 | read-only | mandatory | The number of write commands issued, 16K bytes <= size < 32K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.26 | ColumnstatisticsWriteBucket7 | read-only | mandatory | The number of write commands issued, 32K bytes <= size < 64K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.27 | ColumnstatisticsWriteBucket8 | read-only | mandatory | The number of write commands issued, 64K bytes <= size < 128K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.28 | ColumnstatisticsWriteBucket9 | read-only | mandatory | The number of write commands issued, 128K bytes <= size < 256K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.29 | ColumnstatisticsWriteBucket10 | read-only | mandatory | The number of write commands issued, 256K bytes <= size < 512K bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.30 | ColumnstatisticsWriteBucket11 | read-only | mandatory | The number of write commands issued, 512K bytes <= size < 1M bytes. |
| 1.3.6.1.4.1.795.12.2.17.1.1.31 | ColumnstatisticsWriteBucket12 | read-only | mandatory | The number of write commands issued, size >= 1M bytes. |
| 1.3.6.1.4.1.795.12.2.18 | NodetrapLogCount | |||
| 1.3.6.1.4.1.795.12.2.18.1 | ScalartrapLogNumEntries | read-only | mandatory | The number entries in the Trap Log. |
| 1.3.6.1.4.1.795.12.2.19 | NodetrapLog | |||
| 1.3.6.1.4.1.795.12.2.19.1 | TabletrapLogTable | not-accessible | mandatory | A circular list of trap log entries. The number of entries is given by the value of trapLogCount. Current maximum trap log count is fixed at 125, but should be… |
| 1.3.6.1.4.1.795.12.2.19.1.1 | RowtrapLogEntry | not-accessible | mandatory | A trap log entry. |
| 1.3.6.1.4.1.795.12.2.19.1.1.1 | ColumntrapLogIndex | read-only | mandatory | A unique index value for each trap log table entry beginning with 1. |
| 1.3.6.1.4.1.795.12.2.19.1.1.2 | ColumntrapLogString | read-only | mandatory | A textual string containing the text of the last trap. |
| 1.3.6.1.4.1.795.12.2.19.1.1.3 | ColumntrapLogTimeStamp | read-only | mandatory | The number of seconds which have elapsed between powerup and the trap occurrence. |
| 1.3.6.1.4.1.795.12.2.1010 | NodeiomStorageControllerStateChangeI | IOManager storage controller %d has changed state (informational). | ||
| 1.3.6.1.4.1.795.12.2.1011 | NodeiomStorageControllerStateChangeW | IOManager storage controller %d has changed state (warning). | ||
| 1.3.6.1.4.1.795.12.2.1012 | NodeiomStorageControllerStateChangeC | IOManager storage controller %d has changed state (critical). | ||
| 1.3.6.1.4.1.795.12.2.1020 | NodeiomBusPortStateChangeI | IOManager bus port %d has changed state (informational). | ||
| 1.3.6.1.4.1.795.12.2.1021 | NodeiomBusPortStateChangeW | IOManager bus port %d has changed state (warning). | ||
| 1.3.6.1.4.1.795.12.2.1022 | NodeiomBusPortStateChangeC | IOManager bus port %d has changed state (critical). | ||
| 1.3.6.1.4.1.795.12.2.1030 | NodeiomStorageDeviceStateChangeI | IOManager storage device %d has changed state (informational). | ||
| 1.3.6.1.4.1.795.12.2.1031 | NodeiomStorageDeviceStateChangeW | IOManager storage device %d has changed state (warning). | ||
| 1.3.6.1.4.1.795.12.2.1032 | NodeiomStorageDeviceStateChangeC | IOManager storage device %d has changed state (critical). | ||
| 1.3.6.1.4.1.795.12.2.1040 | NodeiomVolumeSetStateChangeI | IOManager volume set %d has changed state (informational). | ||
| 1.3.6.1.4.1.795.12.2.1041 | NodeiomVolumeSetStateChangeW | IOManager volume set %d has changed state (warning). | ||
| 1.3.6.1.4.1.795.12.2.1042 | NodeiomVolumeSetStateChangeC | IOManager volume set %d has changed state (critical). | ||
| 1.3.6.1.4.1.795.12.2.1050 | NodeiomVolumeSetActivityChangeI | IOManager volume set %d has changed activity (informational). | ||
| 1.3.6.1.4.1.795.12.2.1051 | NodeiomVolumeSetActivityChangeW | IOManager volume set %d has changed activity (warning). | ||
| 1.3.6.1.4.1.795.12.2.1052 | NodeiomVolumeSetActivityChangeC | IOManager volume set %d has changed activity (critical). | ||
| 1.3.6.1.4.1.795.12.2.1060 | NodeiomSpareStateChangeI | IOManager spare %d has changed state (informational). | ||
| 1.3.6.1.4.1.795.12.2.1061 | NodeiomSpareStateChangeW | IOManager spare %d has changed state (warning). | ||
| 1.3.6.1.4.1.795.12.2.1062 | NodeiomSpareStateChangeC | IOManager spare %d has changed state (critical). | ||
| 1.3.6.1.4.1.795.12.2.1070 | NodeiomEnclosureStateChangeI | A component in IOManager enclosure %d has changed state (informational). | ||
| 1.3.6.1.4.1.795.12.2.1071 | NodeiomEnclosureStateChangeW | A component in IOManager enclosure %d has changed state (warning). | ||
| 1.3.6.1.4.1.795.12.2.1072 | NodeiomEnclosureStateChangeC | A component in IOManager enclosure %d has changed state (critical). | ||
| 1.3.6.1.4.1.795.12.2.9000 | NodeiomTraps | |||
| 1.3.6.1.4.1.795.12.2.9000.9001 | ScalariomSeverity | not-accessible | mandatory | Severity level of the trap. |
| 1.3.6.1.4.1.795.12.2.9000.9002 | ScalariomObject | not-accessible | mandatory | The object identifier of the object referred to by the trap. |
| 1.3.6.1.4.1.795.12.2.9000.9003 | ScalariomPhysicalObjectState | not-accessible | mandatory | New state for the object referred to by the trap. |
| 1.3.6.1.4.1.795.12.2.9000.9004 | ScalariomVolumeSetState | not-accessible | mandatory | New state for the object referred to by the trap. |
| 1.3.6.1.4.1.795.12.2.9000.9005 | ScalariomVolumeSetActivity | not-accessible | mandatory | New activity for the object referred to by the trap. |
| 1.3.6.1.4.1.795.12.2.9000.9006 | ScalariomVolumeSetActivityState | not-accessible | mandatory | Status of a new activity for the object referred to by the trap. |
| 1.3.6.1.4.1.795.12.2.9000.9007 | ScalariomSpareState | not-accessible | mandatory | New state for the object referred to by the trap. |
| 1.3.6.1.4.1.795.12.2.9000.9008 | ScalariomEnclosureComponent | not-accessible | mandatory | The part of the enclosure affected by this trap. |
| 1.3.6.1.4.1.795.12.2.9000.9009 | ScalariomEnclosureComponentNumber | not-accessible | mandatory | The ordinal number of the part of the enclosure affected by this trap. Numbers ordinarily start at 1, such as Fan 1. A number of 0 refers to all such parts as … |
| 1.3.6.1.4.1.795.12.2.9000.9010 | ScalariomEnclosureComponentState | not-accessible | mandatory | Description of the change in status in the affected enclosure part. |
| 1.3.6.1.4.1.795.12.2.9000.9011 | ScalariomRowNumber | not-accessible | mandatory | The row number in the appropriate table of the object referred to by the trap. |