IPAD-MIB
283 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.321 | Nodeverilink | |||
| 1.3.6.1.4.1.321.100 | Nodehbu | |||
| 1.3.6.1.4.1.321.100.1 | Nodeipad | |||
| 1.3.6.1.4.1.321.100.1.1 | NodeipadFrPort | |||
| 1.3.6.1.4.1.321.100.1.1.1 | TableipadFrPortTable | not-accessible | optional | Table of frame relay port parameters. |
| 1.3.6.1.4.1.321.100.1.1.1.1 | RowipadFrPortTableEntry | not-accessible | mandatory | An entry in the ipad frame relay port table. |
| 1.3.6.1.4.1.321.100.1.1.1.1.1 | ColumnipadFrPortService | read-only | mandatory | Index into the ipad frame relay port table; an entry in the ipad service table. |
| 1.3.6.1.4.1.321.100.1.1.1.1.2 | ColumnipadFrPortActive | read-only | mandatory | Specifies if the port is active. |
| 1.3.6.1.4.1.321.100.1.1.1.1.3 | ColumnipadFrPortLMIType | read-only | mandatory | Specifies the link management information type used on this port. |
| 1.3.6.1.4.1.321.100.1.1.1.1.4 | ColumnipadFrPortLMIMode | read-only | mandatory | Specifies the link management information mode used on this port. |
| 1.3.6.1.4.1.321.100.1.1.1.1.5 | ColumnipadFrPortRxInvAlmThreshold | read-write | mandatory | Sets the rx invalid frames alarm threshold. Setting this field to 0 disables the alarm. |
| 1.3.6.1.4.1.321.100.1.1.1.1.6 | ColumnipadFrPortRxInvAlmAlarm | read-only | mandatory | Reports if the invalid frames threshold has been exceeded. |
| 1.3.6.1.4.1.321.100.1.1.1.1.7 | ColumnipadFrPortTxAlmThreshold | read-write | mandatory | Sets the tx throughput alarm threshold (in octets/second). Setting this field to 0 disables the alarm. |
| 1.3.6.1.4.1.321.100.1.1.1.1.8 | ColumnipadFrPortTxAlmAlarm | read-only | mandatory | Reports if the tx throughput threshold has been exceeded. |
| 1.3.6.1.4.1.321.100.1.1.1.1.9 | ColumnipadFrPortRxAlmThreshold | read-write | mandatory | Sets the rx throughput alarm threshold (in octets/second). Setting this field to 0 disables the alarm. |
| 1.3.6.1.4.1.321.100.1.1.1.1.10 | ColumnipadFrPortRxAlmAlarm | read-only | mandatory | Reports if the rx throughput threshold has been exceeded. |
| 1.3.6.1.4.1.321.100.1.2 | NodeipadService | |||
| 1.3.6.1.4.1.321.100.1.2.1 | TableipadServiceTable | not-accessible | optional | The ipad service table. |
| 1.3.6.1.4.1.321.100.1.2.1.1 | RowipadServiceTableEntry | not-accessible | mandatory | An entry in the ipad service table. |
| 1.3.6.1.4.1.321.100.1.2.1.1.1 | ColumnipadServiceIndex | read-only | mandatory | The index for the ipad service table. |
| 1.3.6.1.4.1.321.100.1.2.1.1.2 | ColumnipadServiceifIndex | read-write | mandatory | The MIB-II ifIndex for this service. |
| 1.3.6.1.4.1.321.100.1.2.1.1.3 | ColumnipadServiceType | read-write | mandatory | The type of this service. |
| 1.3.6.1.4.1.321.100.1.2.1.1.4 | ColumnipadServicePair | read-write | mandatory | An entry in this table, which establishes a service pairing. |
| 1.3.6.1.4.1.321.100.1.2.2 | ScalaripadServiceAddService | read-write | mandatory | Adds a row to the Service Table. |
| 1.3.6.1.4.1.321.100.1.2.3 | ScalaripadServiceDeleteService | read-write | mandatory | Identifies a Service to be deleted; an index into the Service Table. |
| 1.3.6.1.4.1.321.100.1.3 | NodeipadChannel | |||
| 1.3.6.1.4.1.321.100.1.3.1 | TableipadChannelTable | not-accessible | optional | The ipad channel table. |
| 1.3.6.1.4.1.321.100.1.3.1.1 | RowipadChannelTableEntry | not-accessible | mandatory | An entry in the ipad channel table. |
| 1.3.6.1.4.1.321.100.1.3.1.1.1 | ColumnipadChannelifIndex | read-only | mandatory | Primary index into ipad channel table, MIB-II ifIndex. |
| 1.3.6.1.4.1.321.100.1.3.1.1.2 | ColumnipadChannelIndex | read-only | mandatory | Channel index for the physical interface. |
| 1.3.6.1.4.1.321.100.1.3.1.1.3 | ColumnipadChannelService | read-write | mandatory | Index into service table for this channel. |
| 1.3.6.1.4.1.321.100.1.3.1.1.4 | ColumnipadChannelPair | read-write | mandatory | Pair for this channel; an entry in the channel table. Use service pair in service table to determine which service contains this channel. |
| 1.3.6.1.4.1.321.100.1.3.1.1.5 | ColumnipadChannelRate | read-write | mandatory | Rate for this channel. |
| 1.3.6.1.4.1.321.100.1.4 | NodeipadDLCI | |||
| 1.3.6.1.4.1.321.100.1.4.1 | TableipadDLCITable | not-accessible | optional | The ipad DLCI table. |
| 1.3.6.1.4.1.321.100.1.4.1.1 | RowipadDLCITableEntry | not-accessible | mandatory | An entry in the ipad DLCI table. |
| 1.3.6.1.4.1.321.100.1.4.1.1.1 | ColumnipadDLCIservice | read-only | mandatory | An index into the ipad service table. |
| 1.3.6.1.4.1.321.100.1.4.1.1.2 | ColumnipadDLCInumber | read-only | mandatory | The DLCI number for this entry. |
| 1.3.6.1.4.1.321.100.1.4.1.1.3 | ColumnipadDLCIactive | read-only | mandatory | Specifies if the DLCI is active. |
| 1.3.6.1.4.1.321.100.1.4.1.1.4 | ColumnipadDLCIcongestion | read-only | mandatory | Specifies if the dlci is receiving frames with FECN or BECN bit set. |
| 1.3.6.1.4.1.321.100.1.4.1.1.5 | ColumnipadDLCIremote | read-only | mandatory | Remote DLCI number. |
| 1.3.6.1.4.1.321.100.1.4.1.1.6 | ColumnipadDLCIremoteUnit | read-only | mandatory | Name of the remote DLCI. |
| 1.3.6.1.4.1.321.100.1.4.1.1.7 | ColumnipadDLCIremoteEquipActive | read-only | mandatory | Reports if the equipment attached to the remote unit is active. |
| 1.3.6.1.4.1.321.100.1.4.1.1.8 | ColumnipadDLCIencapsulation | read-write | mandatory | Type of protocol encapsulation used on this DLCI. |
| 1.3.6.1.4.1.321.100.1.4.1.1.9 | ColumnipadDLCIproprietary | read-write | mandatory | When the encapsulation is proprietary, the traffic type must be configured to gather protocol specific statistics. |
| 1.3.6.1.4.1.321.100.1.4.1.1.10 | ColumnipadDLCIpropOffset | read-write | mandatory | When the encapsulation is proprietary, this is the number of bytes after the frame relay header to look for the specified protocol decode. |
| 1.3.6.1.4.1.321.100.1.4.1.1.11 | ColumnipadDLCIinBand | read-write | mandatory | Determines if frames on this DLCI will be parsed to look for management frames destined for the unit itself. |
| 1.3.6.1.4.1.321.100.1.4.1.1.12 | ColumnipadDLCICIR | read-write | mandatory | Default committed information rate in bits per second. |
| 1.3.6.1.4.1.321.100.1.4.1.1.13 | ColumnipadDLCIBe | read-write | mandatory | Default excess burst rate in bits per second. |
| 1.3.6.1.4.1.321.100.1.4.1.1.14 | ColumnipadDLCIminBC | read-write | mandatory | If the corresponding interface is configured to enable congestion management, the minimum transfer rate at which the unit will throttle back offering data to t… |
| 1.3.6.1.4.1.321.100.1.4.1.1.15 | ColumnipadDLCIrxMon | read-write | mandatory | Determines if the SLA parameters will be monitored for received frames. |
| 1.3.6.1.4.1.321.100.1.4.1.1.16 | ColumnipadDLCIdEctrl | read-write | mandatory | Determines if the Rx monitor will set the DE bit on all frames received in excess of the CIR before they are switched to their destination port. |
| 1.3.6.1.4.1.321.100.1.4.1.1.17 | ColumnipadDLCIenableDelay | read-write | mandatory | Enable or disable delay. |
| 1.3.6.1.4.1.321.100.1.4.1.1.18 | ColumnipadDLCItxExCIRThreshold | read-write | mandatory | Sets the Tx over CIR alarm threshold. This threshold is the number of octets per second in excess of CIR. Setting this field to 0 disables the alarm. |
| 1.3.6.1.4.1.321.100.1.4.1.1.19 | ColumnipadDLCItxExCIRAlarm | read-only | mandatory | Reports if the Tx over CIR threshold has been exceeded. |
| 1.3.6.1.4.1.321.100.1.4.1.1.20 | ColumnipadDLCItxExBeThreshold | read-write | mandatory | Sets the Tx over Be alarm threshold. This threshold is the number of octets per second in excess of Be. Setting this field to 0 disables the alarm. |
| 1.3.6.1.4.1.321.100.1.4.1.1.21 | ColumnipadDLCItxExBeAlarm | read-only | mandatory | Reports if the Tx over Be threshold has been exceeded. |
| 1.3.6.1.4.1.321.100.1.4.1.1.22 | ColumnipadDLCIrxCongThreshold | read-write | mandatory | Sets the Rx congestion alarm threshold. This threshold is the number of frames received with BECN/FECN. Setting this field to 0 disables the alarm. |
| 1.3.6.1.4.1.321.100.1.4.1.1.23 | ColumnipadDLCIrxCongAlarm | read-only | mandatory | Reports if the Rx congestion threshold has been exceeded. |
| 1.3.6.1.4.1.321.100.1.4.1.1.24 | ColumnipadDLCIrxBECNinCIR | read-only | mandatory | Reports if BECN has been received within CIR. |
| 1.3.6.1.4.1.321.100.1.4.1.1.25 | ColumnipadDLCIUASThreshold | read-write | mandatory | Sets the UAS (unavailable seconds) alarm threshold. This threshold is the number of seconds passed that the DLCI is unavailable. Setting this field to 0 disabl… |
| 1.3.6.1.4.1.321.100.1.4.1.1.26 | ColumnipadDLCIUASAlarm | read-only | mandatory | Reports if the UAS threshold has been exceeded. |
| 1.3.6.1.4.1.321.100.1.4.2 | ScalaripadDLCILastChange | read-only | mandatory | Time of the last change in the DLCI table. |
| 1.3.6.1.4.1.321.100.1.5 | NodeipadEndpoint | |||
| 1.3.6.1.4.1.321.100.1.5.1 | TableipadEndpointTable | not-accessible | optional | The ipad endpoint table. |
| 1.3.6.1.4.1.321.100.1.5.1.1 | RowipadEndpointTableEntry | not-accessible | mandatory | An entry in the ipad endpoint table. |
| 1.3.6.1.4.1.321.100.1.5.1.1.1 | ColumnipadEndpointIndex | read-only | mandatory | The index into the ipad endpoint table. |
| 1.3.6.1.4.1.321.100.1.5.1.1.2 | ColumnipadEndpointName | read-write | mandatory | The name for the endpoint. |
| 1.3.6.1.4.1.321.100.1.5.1.1.3 | ColumnipadEndpointService | read-write | mandatory | An index into the ipad service table. |
| 1.3.6.1.4.1.321.100.1.5.1.1.4 | ColumnipadEndpointDLCInumber | read-write | mandatory | Data link connection identifier for this endpoint; The DLCI number for this entry. |
| 1.3.6.1.4.1.321.100.1.5.1.1.5 | ColumnipadEndpointType | read-write | mandatory | Endpoint type. |
| 1.3.6.1.4.1.321.100.1.5.1.1.6 | ColumnipadEndpointForward | read-write | mandatory | Index into the endpoint names table. This is the endpoint on which data should be forwarded for switched endpoints. |
| 1.3.6.1.4.1.321.100.1.5.1.1.7 | ColumnipadEndpointBackup | read-write | mandatory | Index into the endpoint table. This is the endpoint on which data should be forwarded in the case where the endpoint becomes inactive. |
| 1.3.6.1.4.1.321.100.1.5.1.1.8 | ColumnipadEndpointRefSLP | read-write | mandatory | Index into the endpoint table. The service level parameters can be copied from another configured endpoint. |
| 1.3.6.1.4.1.321.100.1.5.1.1.9 | ColumnipadEndpointRemoteIpAddr | read-write | mandatory | IP address for remote. |
| 1.3.6.1.4.1.321.100.1.5.1.1.10 | ColumnipadEndpointRemoteIpMask | read-write | mandatory | IP address mask for remote. |
| 1.3.6.1.4.1.321.100.1.5.2 | ScalaripadEndpointAddEndpoint | read-write | mandatory | Identifies an Endpoint to be added. |
| 1.3.6.1.4.1.321.100.1.5.3 | ScalaripadEndpointDeleteEndpoint | read-write | mandatory | Identifies an Endpoint to be deleted. |
| 1.3.6.1.4.1.321.100.1.5.4 | ScalaripadEndpointLastChange | read-only | mandatory | Time of the last change in the Endpoint table. |
| 1.3.6.1.4.1.321.100.1.6 | NodeipadUser | |||
| 1.3.6.1.4.1.321.100.1.6.1 | TableipadUserTable | not-accessible | optional | Table of user selected parameters. |
| 1.3.6.1.4.1.321.100.1.6.1.1 | RowipadUserTableEntry | not-accessible | mandatory | An entry in the ipad user table. |
| 1.3.6.1.4.1.321.100.1.6.1.1.1 | ColumnipadUserIndex | read-only | mandatory | Index into the ipad user table. |
| 1.3.6.1.4.1.321.100.1.6.1.1.2 | ColumnipadUserFilterByDLCI | read-write | mandatory | Enables Service+DLCI filtering for this user statistic. |
| 1.3.6.1.4.1.321.100.1.6.1.1.3 | ColumnipadUserService | read-write | mandatory | Specifies the service for this user type; identifies an entry in the ipad DLCI table when combined with ipadUserDLCI. Meaningful when ipadUserFilterByDLCI is e… |
| 1.3.6.1.4.1.321.100.1.6.1.1.4 | ColumnipadUserDLCI | read-write | mandatory | Specifies the DLCI for this user type; identifies an entry in the ipad DLCI table when combined with ipadUserService. Meaningful when ipadUserFilterByDLCI is e… |
| 1.3.6.1.4.1.321.100.1.6.1.1.5 | ColumnipadUserFilterByIPAddress | read-write | mandatory | Enables IP address filtering for this user statistic. A packet is counted towards the user statistics if the result of a bitwise-and of an IP address in a tran… |
| 1.3.6.1.4.1.321.100.1.6.1.1.6 | ColumnipadUserIPAddress | read-write | mandatory | Specifies the IP address for this user type. |
| 1.3.6.1.4.1.321.100.1.6.1.1.7 | ColumnipadUserIPMask | read-write | mandatory | Specifies the IP address mask for this user type. |
| 1.3.6.1.4.1.321.100.1.6.1.1.8 | ColumnipadUserFilterByIPPort | read-write | mandatory | Enables IP Port filtering for this user statistic. |
| 1.3.6.1.4.1.321.100.1.6.1.1.9 | ColumnipadUserIPPort | read-write | mandatory | Specifies the IP port for this user type. |
| 1.3.6.1.4.1.321.100.1.6.1.1.10 | ColumnipadUserTxAlmThreshold | read-write | mandatory | Sets the tx throughput alarm threshold in octets per second. Setting this field to 0 disables the alarm. |
| 1.3.6.1.4.1.321.100.1.6.1.1.11 | ColumnipadUserTxAlmAlarm | read-only | mandatory | Reports if the tx throughput threshold has been exceeded. |
| 1.3.6.1.4.1.321.100.1.6.2 | ScalaripadUserIPStatTimeRemaining | read-write | mandatory | Specifies seconds until the next IP TopN report is generated. |
| 1.3.6.1.4.1.321.100.1.6.3 | ScalaripadUserIPStatTimeDuration | read-only | mandatory | The value of TimeRemaining when TimeRemaining was last set. Indicates the number of seconds that the next IP TopN report will cover. |
| 1.3.6.1.4.1.321.100.1.6.4 | ScalaripadUserIPStatStartTime | read-only | mandatory | The value of SysUpTime when TimeRemaining was last set. |
| 1.3.6.1.4.1.321.100.1.6.5 | ScalaripadUserIPStatRequestedReportSize | read-write | mandatory | Determines the requested maximum number of entries in the topN report. |
| 1.3.6.1.4.1.321.100.1.6.6 | ScalaripadUserIPStatGrantedReportSize | read-only | mandatory | Determines the granted number of entries in the topN report. This is by definition less than or equal to requested report size. |
| 1.3.6.1.4.1.321.100.1.6.7 | ScalaripadUserIPStatReportNumber | read-only | mandatory | Specifies the number of reports that have been generated. This value resets to zero when the unit is restarted. |
| 1.3.6.1.4.1.321.100.1.6.8 | ScalaripadUserIPStatDiscardType | read-write | mandatory | The internal table used to track TopN statistics is finite in size. On the condition when the internal table is full and a new IP address is encountered, an el… |
| 1.3.6.1.4.1.321.100.1.7 | NodeipadPPP | |||
| 1.3.6.1.4.1.321.100.1.7.1 | TableipadPPPCfgTable | not-accessible | optional | The ipad PPP configuration table. |
| 1.3.6.1.4.1.321.100.1.7.1.1 | RowipadPPPCfgTableEntry | not-accessible | mandatory | An entry in the ipad PPP configuration table. |
| 1.3.6.1.4.1.321.100.1.7.1.1.1 | ColumnipadPPPCfgService | read-only | mandatory | The index into the PPP configuration table; an entry in the ipad service table. |
| 1.3.6.1.4.1.321.100.1.7.1.1.2 | ColumnipadPPPCfgDialMode | read-write | mandatory | Determines the permancency of a communications connection. |
| 1.3.6.1.4.1.321.100.1.7.1.1.3 | ColumnipadPPPCfgInactivityTimer | read-write | mandatory | Determines when a dial-up or demand-dial connection will be disconnected due to inactivity in both directions. When this parameter is set to zero then the time… |
| 1.3.6.1.4.1.321.100.1.7.1.1.4 | ColumnipadPPPCfgNegotiationInit | read-write | mandatory | Determines if the port waits for the other end to initiate parameter negotiations. |
| 1.3.6.1.4.1.321.100.1.7.1.1.5 | ColumnipadPPPCfgMRU | read-write | mandatory | The maximum receive unit the interface will accept. Valid values are in the range 128 - 4096, default is 1500. |
| 1.3.6.1.4.1.321.100.1.7.1.1.6 | ColumnipadPPPCfgACCM | read-write | mandatory | Sets the async control character map used when generating async HDLC frames. Setting a bit in the map causes the corresponding character to be mapped for trans… |
| 1.3.6.1.4.1.321.100.1.7.1.1.7 | ColumnipadPPPCfgNegMRU | read-write | mandatory | Determines if MRU size is negotiated. |
| 1.3.6.1.4.1.321.100.1.7.1.1.8 | ColumnipadPPPCfgNegACCM | read-write | mandatory | Determines if ACCM is negotiated. |
| 1.3.6.1.4.1.321.100.1.7.1.1.9 | ColumnipadPPPCfgNegMagic | read-write | mandatory | Determines if the magic number is negotiated. |
| 1.3.6.1.4.1.321.100.1.7.1.1.10 | ColumnipadPPPCfgNegCompression | read-write | mandatory | Determines if the PPP protocol header compression is negotiated. |
| 1.3.6.1.4.1.321.100.1.7.1.1.11 | ColumnipadPPPCfgNegAddress | read-write | mandatory | Determines if the PPP HDLC header compression is negotiated. |
| 1.3.6.1.4.1.321.100.1.7.1.1.12 | ColumnipadPPPCfgNegPAP | read-write | mandatory | Determines if PAP is negotiated with the peer when a more secure authentication protocol is rejected. |
| 1.3.6.1.4.1.321.100.1.7.1.1.13 | ColumnipadPPPCfgNegCHAP | read-write | mandatory | Determines if CHAP is negotiated with the peer when a more secure authentication protocol is rejected. |
| 1.3.6.1.4.1.321.100.1.7.1.1.14 | ColumnipadPPPCfgAllowPAP | read-write | mandatory | Determines if PAP is allowed to be negotiated by the peer. |
| 1.3.6.1.4.1.321.100.1.7.1.1.15 | ColumnipadPPPCfgAllowCHAP | read-write | mandatory | Determines if CHAP is allowed to be negotiated by the peer. |
| 1.3.6.1.4.1.321.100.1.7.1.1.16 | ColumnipadPPPCfgPAPUsername | read-write | mandatory | Identification string to determine the user identity. |
| 1.3.6.1.4.1.321.100.1.7.1.1.17 | ColumnipadPPPCfgPAPPassword | read-write | mandatory | Password string to validate the user identity. |
| 1.3.6.1.4.1.321.100.1.7.1.1.18 | ColumnipadPPPCfgCHAPUsername | read-write | mandatory | Identification string to determine the user identity. |
| 1.3.6.1.4.1.321.100.1.7.1.1.19 | ColumnipadPPPCfgCHAPSecret | read-write | mandatory | Password string to validate the user identity. |
| 1.3.6.1.4.1.321.100.1.7.1.1.20 | ColumnipadPPPCfgPortIpAddress | read-write | mandatory | Sets the IP address of the unit's port. |
| 1.3.6.1.4.1.321.100.1.7.1.1.21 | ColumnipadPPPCfgPeerIpAddress | read-write | mandatory | Sets the IP address of the unit's peer. |
| 1.3.6.1.4.1.321.100.1.7.1.1.22 | ColumnipadPPPCfgNegIpAddress | read-write | mandatory | Determines if IP addresses are dynamically negotiated. |
| 1.3.6.1.4.1.321.100.1.7.1.1.23 | ColumnipadPPPCfgNegIPCPCompression | read-write | mandatory | Determines if Van Jacobson TCPIP header compression is negotiated. |
| 1.3.6.1.4.1.321.100.1.7.1.1.24 | ColumnipadPPPCfgSubnetMask | read-write | mandatory | Specifies the subnet mask. |
| 1.3.6.1.4.1.321.100.1.7.1.1.25 | ColumnipadPPPCfgAuthChallengeInterval | read-write | mandatory | Specifies the authentication challenge interval. |
| 1.3.6.1.4.1.321.100.1.7.2 | TableipadPPPPAPTable | not-accessible | optional | Table of PAP authentication parameters. |
| 1.3.6.1.4.1.321.100.1.7.2.1 | RowipadPPPPAPTableEntry | not-accessible | mandatory | An entry in the ipad PPP PAP table. |
| 1.3.6.1.4.1.321.100.1.7.2.1.1 | ColumnipadPPPPAPTableIndex | read-only | mandatory | The index into the PPP PAP association table. |
| 1.3.6.1.4.1.321.100.1.7.2.1.2 | ColumnipadPPPPAPTableUsername | read-write | mandatory | Identification string to identify the user. |
| 1.3.6.1.4.1.321.100.1.7.2.1.3 | ColumnipadPPPPAPTablePassword | read-write | mandatory | Password string to validate the user identity. |
| 1.3.6.1.4.1.321.100.1.7.3 | TableipadPPPCHAPTable | not-accessible | optional | Table of CHAP authentication parameters. |
| 1.3.6.1.4.1.321.100.1.7.3.1 | RowipadPPPCHAPTableEntry | not-accessible | mandatory | An entry in the ipad PPP CHAP table. |
| 1.3.6.1.4.1.321.100.1.7.3.1.1 | ColumnipadPPPCHAPTableIndex | read-only | mandatory | The index into the PPP CHAP association table. |
| 1.3.6.1.4.1.321.100.1.7.3.1.2 | ColumnipadPPPCHAPTableUsername | read-write | mandatory | Identification string to identify the user. |
| 1.3.6.1.4.1.321.100.1.7.3.1.3 | ColumnipadPPPCHAPTableSecret | read-write | mandatory | Password string to validate the user identity. |
| 1.3.6.1.4.1.321.100.1.8 | NodeipadModem | |||
| 1.3.6.1.4.1.321.100.1.8.1 | TableipadModemDialTable | not-accessible | optional | Table of modem dialing parameters. |
| 1.3.6.1.4.1.321.100.1.8.1.1 | RowipadModemDialTableEntry | not-accessible | mandatory | An entry in the ipad modem dialing parameters table. |
| 1.3.6.1.4.1.321.100.1.8.1.1.1 | ColumnipadModemDialTableIndex | read-only | mandatory | The index into the ipad modem dialing parameters table. Equivalent to MIB-II ifIndex. |
| 1.3.6.1.4.1.321.100.1.8.1.1.2 | ColumnipadModemDialDataIndex | read-write | mandatory | An index into the Modem Data Table, which selects a modem. |
| 1.3.6.1.4.1.321.100.1.8.1.1.3 | ColumnipadModemDialNumber | read-write | mandatory | Specifies the telephone number to dial. |
| 1.3.6.1.4.1.321.100.1.8.1.1.4 | ColumnipadModemDialAbortTimer | read-write | mandatory | Aborts a connection attempt if an initialed dial-up connection has failed to connect within the specified number of seconds. Range is 1..255. |
| 1.3.6.1.4.1.321.100.1.8.1.1.5 | ColumnipadModemDialRedialAttempts | read-write | mandatory | Determines how many attempts to initiate a dial-up connection after the initial failure. Range is 0..10. |
| 1.3.6.1.4.1.321.100.1.8.1.1.6 | ColumnipadModemDialDelayBeforeRedial | read-write | mandatory | Specifies the number of seconds to wait before redialing. Range is 1..255. |
| 1.3.6.1.4.1.321.100.1.8.1.1.7 | ColumnipadModemDialLoginScript | read-write | mandatory | Script string interpreted after a dial-up connection is first established. |
| 1.3.6.1.4.1.321.100.1.8.1.1.8 | ColumnipadModemDialUsername | read-write | mandatory | Identification string to determine the user identity. |
| 1.3.6.1.4.1.321.100.1.8.1.1.9 | ColumnipadModemDialPassword | read-write | mandatory | Password string to validate the user identity. |
| 1.3.6.1.4.1.321.100.1.8.2 | TableipadModemDataTable | not-accessible | optional | Table of modem database parameters. |
| 1.3.6.1.4.1.321.100.1.8.2.1 | RowipadModemDataTableEntry | not-accessible | mandatory | An entry in the ipad modem database parameters table. |
| 1.3.6.1.4.1.321.100.1.8.2.1.1 | ColumnipadModemDataTableIndex | read-only | mandatory | The index into the ipad modem database parameters table. |
| 1.3.6.1.4.1.321.100.1.8.2.1.2 | ColumnipadModemDataModemName | read-write | mandatory | Identification string for the modem database. |
| 1.3.6.1.4.1.321.100.1.8.2.1.3 | ColumnipadModemDataSetupScript | read-write | mandatory | Script interpreted when a modem port is first started. |
| 1.3.6.1.4.1.321.100.1.8.2.1.4 | ColumnipadModemDataDialingScript | read-write | mandatory | Script interpreted when a dial-up connection is initiated. |
| 1.3.6.1.4.1.321.100.1.8.2.1.5 | ColumnipadModemDataAnswerScript | read-write | mandatory | Script interpreted when a modem port is waiting for an incoming call. |
| 1.3.6.1.4.1.321.100.1.8.2.1.6 | ColumnipadModemDataHangupScript | read-write | mandatory | Script interpreted when a dial-up connection is no longer needed. |
| 1.3.6.1.4.1.321.100.1.9 | NodeipadSvcAware | |||
| 1.3.6.1.4.1.321.100.1.9.1 | TableipadFrPortStatsTable | not-accessible | optional | Port statistics. |
| 1.3.6.1.4.1.321.100.1.9.1.1 | RowipadFrPortStatsEntry | not-accessible | mandatory | An entry in the service aware ports statistics table. |
| 1.3.6.1.4.1.321.100.1.9.1.1.1 | ColumnipadFrPortStatsService | read-only | mandatory | Port index in the ipadFrPortStats table; an entry in the ipad service table. |
| 1.3.6.1.4.1.321.100.1.9.1.1.2 | ColumnipadFrPortStatsPeriod | read-only | mandatory | The index into the port stats 24-hour table. |
| 1.3.6.1.4.1.321.100.1.9.1.1.3 | ColumnipadFrPortStatsTxFrames | read-only | mandatory | Number of transmitted frames for the period. |
| 1.3.6.1.4.1.321.100.1.9.1.1.4 | ColumnipadFrPortStatsRxFrames | read-only | mandatory | Number of received frames for the period. |
| 1.3.6.1.4.1.321.100.1.9.1.1.5 | ColumnipadFrPortStatsTxOctets | read-only | mandatory | Number of transmitted octets for the period. |
| 1.3.6.1.4.1.321.100.1.9.1.1.6 | ColumnipadFrPortStatsRxOctets | read-only | mandatory | Number of received octets for the period. |
| 1.3.6.1.4.1.321.100.1.9.1.1.7 | ColumnipadFrPortStatsTxMgmtFrames | read-only | mandatory | Number of transmitted management frames for the period. |
| 1.3.6.1.4.1.321.100.1.9.1.1.8 | ColumnipadFrPortStatsRxMgmtFrames | read-only | mandatory | Number of received management frames for the period. |
| 1.3.6.1.4.1.321.100.1.9.1.1.9 | ColumnipadFrPortStatsTxMgmtOctets | read-only | mandatory | Number of transmitted management octets for the period. |
| 1.3.6.1.4.1.321.100.1.9.1.1.10 | ColumnipadFrPortStatsRxMgmtOctets | read-only | mandatory | Number of received management octets for the period. |
| 1.3.6.1.4.1.321.100.1.9.1.1.11 | ColumnipadFrPortStatsRxFECN | read-only | mandatory | Number of received frames with FECN set for the period. |
| 1.3.6.1.4.1.321.100.1.9.1.1.12 | ColumnipadFrPortStatsRxBECN | read-only | mandatory | Number of received frames with BECN set for the period. |
| 1.3.6.1.4.1.321.100.1.9.1.1.13 | ColumnipadFrPortStatsRxInvalid | read-only | mandatory | Number of invalid received frames for the period. |
| 1.3.6.1.4.1.321.100.1.9.1.1.14 | ColumnipadFrPortStatsTxStatInq | read-only | mandatory | Number of transmitted status inquiry frames for the period. |
| 1.3.6.1.4.1.321.100.1.9.1.1.15 | ColumnipadFrPortStatsRxStatInq | read-only | mandatory | Number of received status inquiry frames for the period. |
| 1.3.6.1.4.1.321.100.1.9.1.1.16 | ColumnipadFrPortStatsTxStatResp | read-only | mandatory | Number of transmitted status response frames for the period. |
| 1.3.6.1.4.1.321.100.1.9.1.1.17 | ColumnipadFrPortStatsRxStatResp | read-only | mandatory | Number of received status response frames for the period. |
| 1.3.6.1.4.1.321.100.1.9.1.1.18 | ColumnipadFrPortStatsRxInvLMI | read-only | mandatory | Number of received frames with an invalid LMI for the period. |
| 1.3.6.1.4.1.321.100.1.9.1.1.19 | ColumnipadFrPortStatsPeak | read-only | mandatory | Peak throughput rate for the period (in octets/second). |
| 1.3.6.1.4.1.321.100.1.9.1.1.20 | ColumnipadFrPortStatsAverage | read-only | mandatory | Average throughput rate for the period (in octets/second). |
| 1.3.6.1.4.1.321.100.1.9.2 | TableipadDLCIstatsTable | not-accessible | optional | Port statistics. |
| 1.3.6.1.4.1.321.100.1.9.2.1 | RowipadDLCIstatsEntry | not-accessible | mandatory | An entry in the service aware DLCI statistics table. |
| 1.3.6.1.4.1.321.100.1.9.2.1.1 | ColumnipadDLCIstatsService | read-only | mandatory | The service index for the service aware stats table; identifies an entry in the ipad DLCI table when combined with ipadDLCIstatsDLCI. |
| 1.3.6.1.4.1.321.100.1.9.2.1.2 | ColumnipadDLCIstatsDLCI | read-only | mandatory | The DLCI index for the service aware stats table; identifies an entry in the ipad DLCI table when combined with ipadDLCIstatsService. |
| 1.3.6.1.4.1.321.100.1.9.2.1.3 | ColumnipadDLCIstatsPeriod | read-only | mandatory | The index into the DLCI stats 24-hour table. |
| 1.3.6.1.4.1.321.100.1.9.2.1.4 | ColumnipadDLCIstatsTxFrames | read-only | mandatory | The number of transmitted frames for the period. |
| 1.3.6.1.4.1.321.100.1.9.2.1.5 | ColumnipadDLCIstatsRxFrames | read-only | mandatory | The number of received frames for the period. |
| 1.3.6.1.4.1.321.100.1.9.2.1.6 | ColumnipadDLCIstatsTxOctets | read-only | mandatory | The number of transmitted octets for the period. |
| 1.3.6.1.4.1.321.100.1.9.2.1.7 | ColumnipadDLCIstatsRxOctets | read-only | mandatory | The number of received octets for the period. |
| 1.3.6.1.4.1.321.100.1.9.2.1.8 | ColumnipadDLCIstatsRxFECN | read-only | mandatory | The number of received frames with FECN set for the period. |
| 1.3.6.1.4.1.321.100.1.9.2.1.9 | ColumnipadDLCIstatsRxBECN | read-only | mandatory | The number of received frames with BECN set for the period. |
| 1.3.6.1.4.1.321.100.1.9.2.1.10 | ColumnipadDLCIstatsRxDE | read-only | mandatory | The number of received frames with DE bit set for the period. |
| 1.3.6.1.4.1.321.100.1.9.2.1.11 | ColumnipadDLCIstatsTxExcessCIR | read-only | mandatory | The number of transmitted octets in excess of CIR for the period. |
| 1.3.6.1.4.1.321.100.1.9.2.1.12 | ColumnipadDLCIstatsTxExcessBe | read-only | mandatory | The number of transmitted octets in excess of Be for the period. |
| 1.3.6.1.4.1.321.100.1.9.2.1.13 | ColumnipadDLCIstatsTxMgmtFrames | read-only | mandatory | The number of transmitted management frames for the period. |
| 1.3.6.1.4.1.321.100.1.9.2.1.14 | ColumnipadDLCIstatsRxMgmtFrames | read-only | mandatory | The number of received management frames for the period. |
| 1.3.6.1.4.1.321.100.1.9.2.1.15 | ColumnipadDLCIstatsTxMgmtOctets | read-only | mandatory | The number of transmitted management octets for the period. |
| 1.3.6.1.4.1.321.100.1.9.2.1.16 | ColumnipadDLCIstatsRxMgmtOctets | read-only | mandatory | The number of received management octets for the period. |
| 1.3.6.1.4.1.321.100.1.9.2.1.17 | ColumnipadDLCIstatsPeak | read-only | mandatory | Peak throughput rate for the period (in octets/second). |
| 1.3.6.1.4.1.321.100.1.9.2.1.18 | ColumnipadDLCIstatsAverage | read-only | mandatory | Average throughput rate for the period (in octets/second). |
| 1.3.6.1.4.1.321.100.1.9.2.1.19 | ColumnipadDLCIstatsDelayPeak | read-only | mandatory | Peak roundtrip delay for the period. |
| 1.3.6.1.4.1.321.100.1.9.2.1.20 | ColumnipadDLCIstatsDelayAverage | read-only | mandatory | Average roundtrip delay for the period. |
| 1.3.6.1.4.1.321.100.1.9.2.1.21 | ColumnipadDLCIstatsRoundTripTimeouts | read-only | mandatory | Number of timeouts on roundtrip delay for the period. |
| 1.3.6.1.4.1.321.100.1.9.2.1.22 | ColumnipadDLCIstatsUAS | read-only | mandatory | Number of seconds the DLCI is unavailable. |
| 1.3.6.1.4.1.321.100.1.9.3 | TableipadUserStatsTable | not-accessible | optional | User-selected protocol statistics. |
| 1.3.6.1.4.1.321.100.1.9.3.1 | RowipadUserStatsEntry | not-accessible | mandatory | An entry in the user statistics table. |
| 1.3.6.1.4.1.321.100.1.9.3.1.1 | ColumnipadUserStatsIndex | read-only | mandatory | Index into the user statistics table. |
| 1.3.6.1.4.1.321.100.1.9.3.1.2 | ColumnipadUserStatsPeriod | read-only | mandatory | The index into the user stats 24-hour table. |
| 1.3.6.1.4.1.321.100.1.9.3.1.3 | ColumnipadUserStatsTxFrames | read-only | mandatory | Number of transmitted frames for the period. |
| 1.3.6.1.4.1.321.100.1.9.3.1.4 | ColumnipadUserStatsRxFrames | read-only | mandatory | Number of received frames for the period. |
| 1.3.6.1.4.1.321.100.1.9.3.1.5 | ColumnipadUserStatsTxOctets | read-only | mandatory | Number of transmitted octets for the period. |
| 1.3.6.1.4.1.321.100.1.9.3.1.6 | ColumnipadUserStatsRxOctets | read-only | mandatory | Number of received octets for the period. |
| 1.3.6.1.4.1.321.100.1.9.3.1.7 | ColumnipadUserStatsTxRatePeak | read-only | mandatory | Peak throughput rate for the period (in octets/second). |
| 1.3.6.1.4.1.321.100.1.9.3.1.8 | ColumnipadUserStatsTxRateAverage | read-only | mandatory | Average throughput rate for the period (in octets/second). |
| 1.3.6.1.4.1.321.100.1.9.4 | TableipadIPTopNStatsTable | not-accessible | optional | IP TopN statistics. |
| 1.3.6.1.4.1.321.100.1.9.4.1 | RowipadIPTopNStatsEntry | not-accessible | mandatory | An entry in the user statistics table. |
| 1.3.6.1.4.1.321.100.1.9.4.1.1 | ColumnipadIPTopNStatsIndex | read-only | mandatory | Index into the IP TopN statistics table. |
| 1.3.6.1.4.1.321.100.1.9.4.1.2 | ColumnipadIPTopNStatsAddress | read-only | mandatory | IP address of this entry. |
| 1.3.6.1.4.1.321.100.1.9.4.1.3 | ColumnipadIPTopNStatsTimestamp | read-only | mandatory | Time of last IP frame for this entry. |
| 1.3.6.1.4.1.321.100.1.9.4.1.4 | ColumnipadIPTopNStatsRxFrames | read-only | mandatory | Number of received IP frames for this entry. |
| 1.3.6.1.4.1.321.100.1.9.4.1.5 | ColumnipadIPTopNStatsRxOctets | read-only | mandatory | Number of received IP octets for this entry. |
| 1.3.6.1.4.1.321.100.1.9.4.1.6 | ColumnipadIPTopNStatsTxFrames | read-only | mandatory | Number of transmitted IP frames for this entry. |
| 1.3.6.1.4.1.321.100.1.9.4.1.7 | ColumnipadIPTopNStatsTxOctets | read-only | mandatory | Number of transmitted IP octets for this entry. |
| 1.3.6.1.4.1.321.100.1.10 | NodeipadPktSwitch | |||
| 1.3.6.1.4.1.321.100.1.10.1 | ScalaripadPktSwOperatingMode | read-write | mandatory | Selects overall mode of operation. |
| 1.3.6.1.4.1.321.100.1.10.2 | TableipadPktSwCfgTable | not-accessible | optional | The ipad packet switch configuration table. |
| 1.3.6.1.4.1.321.100.1.10.2.1 | RowipadPktSwCfgTableEntry | not-accessible | mandatory | An entry in the ipad packet switch configuration table. |
| 1.3.6.1.4.1.321.100.1.10.2.1.1 | ColumnipadPktSwCfgService | read-only | mandatory | The index into the packet switch configuration table; an entry in the ipad Service table. |
| 1.3.6.1.4.1.321.100.1.10.2.1.2 | ColumnipadPktSwCfgInterfaceType | read-write | mandatory | Network ports should be set to User Network Interface (uni) and user ports should be set to Network Interface (ni). |
| 1.3.6.1.4.1.321.100.1.10.2.1.3 | ColumnipadPktSwCfgLnkMgmtType | read-write | mandatory | If set to auto, the frame relay LMI type will be learned from the network side. If set to none, all DLCI must be configured. |
| 1.3.6.1.4.1.321.100.1.10.2.1.4 | ColumnipadPktSwCfgMaxFrameSize | read-write | mandatory | This is the maximum frame size configured in the frame relay network. |
| 1.3.6.1.4.1.321.100.1.10.2.1.5 | ColumnipadPktSwCfgnN1 | read-write | mandatory | Number of keep alive requests between full status request. |
| 1.3.6.1.4.1.321.100.1.10.2.1.6 | ColumnipadPktSwCfgnN2 | read-write | mandatory | Number of errors from FRAD before alarm. |
| 1.3.6.1.4.1.321.100.1.10.2.1.7 | ColumnipadPktSwCfgnN3 | read-write | mandatory | Number of events to sample nN2. |
| 1.3.6.1.4.1.321.100.1.10.2.1.8 | ColumnipadPktSwCfgnT1 | read-write | mandatory | Delay before issuing a poll sequence. |
| 1.3.6.1.4.1.321.100.1.10.2.1.9 | ColumnipadPktSwCfgDefCIR | read-write | mandatory | Default committed information rate in bits per second. |
| 1.3.6.1.4.1.321.100.1.10.2.1.10 | ColumnipadPktSwCfgDefExBurst | read-write | mandatory | Default excess burst rate in bits per second. |
| 1.3.6.1.4.1.321.100.1.10.2.1.11 | ColumnipadPktSwCfgCIREE | read-write | mandatory | Determines if the interface will enforce CIR and excess burst configured values. |
| 1.3.6.1.4.1.321.100.1.10.2.1.12 | ColumnipadPktSwCfgLinkInjection | read-write | mandatory | Indicates how to process frames in excess of the CIR when congestion exists. |
| 1.3.6.1.4.1.321.100.1.10.2.1.13 | ColumnipadPktSwCfgAutoDiagnostic | read-write | mandatory | Determines if the unit will put itself into diagnostic mode everytime it determines that there are no LMI received on a network service. |
| 1.3.6.1.4.1.321.100.1.10.2.1.14 | ColumnipadPktSwCfgAutoDiscovery | read-write | mandatory | Determines if the unit will learn the DLCIs from the LMMI received on this service. |
| 1.3.6.1.4.1.321.100.1.10.2.1.15 | ColumnipadPktSwCfgMgmtDLCI | read-write | mandatory | Specifies the DLCI that will be used by the unit for management information. Specifying a 0 disables this feature. |
| 1.3.6.1.4.1.321.100.1.11 | NodeipadTrapDest | |||
| 1.3.6.1.4.1.321.100.1.11.1 | TableipadTrapDestTable | not-accessible | optional | The ipad trap destination table. |
| 1.3.6.1.4.1.321.100.1.11.1.1 | RowipadTrapDestTableEntry | not-accessible | mandatory | An entry in the ipad trap destination table. |
| 1.3.6.1.4.1.321.100.1.11.1.1.1 | ColumnipadTrapDestIndex | read-only | mandatory | Index into the ipad trap destination table. |
| 1.3.6.1.4.1.321.100.1.11.1.1.2 | ColumnipadTrapDestination | read-write | mandatory | Trap destination. |
| 1.3.6.1.4.1.321.100.1.12 | NodeipadMisc | |||
| 1.3.6.1.4.1.321.100.1.12.1 | TableipadMiscPortSettings | not-accessible | optional | The ipad miscellaneous port settings table. |
| 1.3.6.1.4.1.321.100.1.12.1.1 | RowipadMiscPortSettingsEntry | not-accessible | mandatory | An entry in the ipad miscellaneous port settings table. |
| 1.3.6.1.4.1.321.100.1.12.1.1.1 | ColumnipadMiscPortSettingsIndex | read-only | mandatory | The MIB-II ifIndex for this port. |
| 1.3.6.1.4.1.321.100.1.12.1.1.2 | ColumnipadMiscPortSettingsSerialType | read-write | mandatory | The type of this serial port. |
| 1.3.6.1.4.1.321.100.1.12.2 | ScalaripadMiscClearStatusCounts | read-write | mandatory | Writing a 2 to this field will clear all status counts. |
| 1.3.6.1.4.1.321.100.1.13 | NodeipadRouter | |||
| 1.3.6.1.4.1.321.100.1.14 | NodeipadSoftKey | |||
| 1.3.6.1.4.1.321.100.1.14.1 | TableipadSoftKeyTable | not-accessible | mandatory | Table of software keys. |
| 1.3.6.1.4.1.321.100.1.14.1.1 | RowipadSoftKeyTableEntry | not-accessible | mandatory | An entry in the software key table. |
| 1.3.6.1.4.1.321.100.1.14.1.1.1 | ColumnipadSoftKeyIndex | read-only | mandatory | Index into the ipad software key table. |
| 1.3.6.1.4.1.321.100.1.14.1.1.2 | ColumnipadSoftKeyAcronym | read-only | mandatory | Three-letter acronym for software key. |
| 1.3.6.1.4.1.321.100.1.14.1.1.3 | ColumnipadSoftKeyDescription | read-only | mandatory | Description, if available, of this software key. |
| 1.3.6.1.4.1.321.100.1.14.1.1.4 | ColumnipadSoftKeyExpirationDate | read-only | mandatory | Expiration date of this software key in the format YY/MM/DD. |
| 1.3.6.1.4.1.321.100.1.14.2 | ScalaripadSoftKeyEntry | read-write | mandatory | Writing a software key will enable that feature (assuming a correct and valid key is entered). |
| 1.3.6.1.4.1.321.100.25000 | NodeipadFrPortRxInvalidFramesExceeded | This trap is sent out when an ipad frame relay port receive invalid frames alarm threshold has been exceeded. | ||
| 1.3.6.1.4.1.321.100.25001 | NodeipadFrPortRxThroughputExceeded | This trap is sent out when an ipad frame relay port receive throughput threshold has been exceeded. | ||
| 1.3.6.1.4.1.321.100.25002 | NodeipadFrPortTxThroughputExceeded | This trap is sent out when an ipad frame relay port transmit throughput threshold has been exceeded. | ||
| 1.3.6.1.4.1.321.100.25003 | NodeipadDLCItxCIRexceeded | This trap is sent out when the Tx over CIR threshold has been exceeded. This threshold is the number of frames in excess of CIR. | ||
| 1.3.6.1.4.1.321.100.25004 | NodeipadDLCItxBEexceeded | This trap is sent out when the Tx over Be threshold has been exceeded. This threshold is the number of frames in excess of Be. | ||
| 1.3.6.1.4.1.321.100.25005 | NodeipadDLCIRxCongestionExceeded | This trap is sent out when the Rx congestion threshold has been exceeded. This threshold is the number of frames received with BECN/FECN. | ||
| 1.3.6.1.4.1.321.100.25006 | NodeipadUserTxExceeded | This trap is sent out when the Tx throughput threshold in bits per second has been exceeded. This threshold represents the number of bits for the user-selected… | ||
| 1.3.6.1.4.1.321.100.25007 | NodeipadDlciRxBECNinCIRAlarm | This trap is sent out when a frame with BECN set has been received within CIR. | ||
| 1.3.6.1.4.1.321.100.25008 | NodeipadDlciUASExceeded | This trap is sent out when the UAS (unavailable seconds) threshold for the DLCI has been exceeded. | ||
| 1.3.6.1.4.1.321.100.25009 | NodeipadserialDteDTRAlarmExists | This trap is sent out when a DTR Loss alarm is declared. | ||
| 1.3.6.1.4.1.321.100.25010 | Nodeipadt1e1ESAlarmDeclared | This trap is sent out when an Errored Seconds alarm is declared. | ||
| 1.3.6.1.4.1.321.100.25011 | Nodeipadt1e1SESAlarmDeclared | This trap is sent out when a Severely Errored Seconds alarm is declared. | ||
| 1.3.6.1.4.1.321.100.25012 | Nodeipadt1e1LOSSAlarmDeclared | This trap is sent out when a Loss of Signal Seconds alarm is declared. | ||
| 1.3.6.1.4.1.321.100.25013 | Nodeipadt1e1UASAlarmDeclared | This trap is sent out when an Unavailable Seconds alarm is declared. | ||
| 1.3.6.1.4.1.321.100.25014 | Nodeipadt1e1CSSAlarmDeclared | This trap is sent out when a Controlled Slip Seconds alarm is declared. | ||
| 1.3.6.1.4.1.321.100.25015 | Nodeipadt1e1BPVSAlarmDeclared | This trap is sent out when a Bipolar Violation Seconds alarm is declared. | ||
| 1.3.6.1.4.1.321.100.25016 | Nodeipadt1e1OOFSAlarmDeclared | This trap is sent out when an Out of Frame Seconds alarm is declared. | ||
| 1.3.6.1.4.1.321.100.25017 | Nodeipadt1e1AISAlarmExists | This trap is sent out when an Alarm Indication Signal alarm is declared. | ||
| 1.3.6.1.4.1.321.100.25018 | Nodeipadt1e1RASAlarmExists | This trap is sent out when a Remote Alarm Signal alarm is declared. | ||
| 1.3.6.1.4.1.321.100.25019 | NodeipadDLCIremoteSOSAlarm | This trap is sent when the remote unit for a DLCI senses and reports an SOS condition. |