MIB Viewer

IPOA-MIB

101 objects
This module defines a portion of the management information base (MIB) for managing Classical IP and ARP over ATM entities.
Imported Objects
ATM-TC-MIB-- AtmConnKind AtmAddr --
IF-MIBInterfaceIndex InterfaceIndexOrZero
IP-MIBipAdEntAddr ipNetToMediaIfIndex ipNetToMediaNetAddress ipNetToMediaPhysAddress
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission
SNMPv2-TCRowStatus TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.2.1.10.46IdentityipoaMIBThis module defines a portion of the management information base (MIB) for managing Classical IP and ARP over ATM entities.
1.3.6.1.2.1.10.46.1NodeipoaObjects
1.3.6.1.2.1.10.46.1.1ScalaripoaLisTrapEnableread-writecurrentIndicates whether ipoaLisCreate and ipoaLisDelete traps should be generated by this system. By default, this object should have the value enabled(1) for system…
1.3.6.1.2.1.10.46.1.2TableipoaLisTablenot-accessiblecurrentThere is one entry in this table for every Logical IP Subnet (LIS) of which this system is a member. The bulk of the objects in an ipoaLisEntry exists to contr…
1.3.6.1.2.1.10.46.1.2.1RowipoaLisEntrynot-accessiblecurrentInformation about a single LIS of which this system is a member. Membership in a LIS is independent of the actual ATM interfaces being used. The ipoaLisTable d…
1.3.6.1.2.1.10.46.1.2.1.1ColumnipoaLisSubnetAddrread-onlycurrentThe IP subnet address associated with this LIS.
1.3.6.1.2.1.10.46.1.2.1.2ColumnipoaLisDefaultMturead-createcurrentThe default MTU used within this LIS. Note that the actual MTU used for a VC between two members of the LIS may be negotiated during connection setup and may b…
1.3.6.1.2.1.10.46.1.2.1.3ColumnipoaLisDefaultEncapsTyperead-createcurrentThe default encapsulation to use on VCs created for this LIS. Note that the actual encapsulation type may be negotiated during connection setup and may be diff…
1.3.6.1.2.1.10.46.1.2.1.4ColumnipoaLisInactivityTimerread-createcurrentThe time, in seconds, before a call established for an ipNetToMediaEntry on a client will timeout due to no traffic being passed on the VC. A value of 0 implie…
1.3.6.1.2.1.10.46.1.2.1.5ColumnipoaLisMinHoldingTimeread-createcurrentThe minimum amount of time, in seconds, that a call will remain open. If 0 then ipoaInactivityTimer will completely determine when a call is terminated.
1.3.6.1.2.1.10.46.1.2.1.6ColumnipoaLisQDepthread-createcurrentThe maximum number of outstanding requests that are allowed while waiting for ATMARP replies and InATMARP replies for this LIS.
1.3.6.1.2.1.10.46.1.2.1.7ColumnipoaLisMaxCallsread-createcurrentThe maximum number of SVCs that can be established simultaneously for this LIS.
1.3.6.1.2.1.10.46.1.2.1.8ColumnipoaLisCacheEntryAgeread-createcurrentThe time, in seconds, before an ipNetToMediaEntry will age out of the table. Note that the default value will be different for a client and a server. An ATMARP…
1.3.6.1.2.1.10.46.1.2.1.9ColumnipoaLisRetriesread-createcurrentThe number of times the ATMARP request will be retried when no response is received in the timeout interval indicated by ipoaLisTimeout.
1.3.6.1.2.1.10.46.1.2.1.10ColumnipoaLisTimeoutread-createcurrentThe time to wait, in seconds, before retransmission of an ARP request.
1.3.6.1.2.1.10.46.1.2.1.11ColumnipoaLisDefaultPeakCellRateread-createcurrentThis object is the signalling parameter that should be used when setting up all best effort VCCs (Virtual Channel Connections). This parameter applies to the f…
1.3.6.1.2.1.10.46.1.2.1.12ColumnipoaLisActiveVcsread-onlycurrentNumber of active SVCs for this LIS.
1.3.6.1.2.1.10.46.1.2.1.13ColumnipoaLisRowStatusread-createcurrentThis object allows entries to be created and deleted in the ipoaLisTable. When the ipoaLisRowStatus deleted (by setting this object to destroy(6)), this has th…
1.3.6.1.2.1.10.46.1.3TableipoaLisIfMappingTablenot-accessiblecurrentThere is one entry in this table for every combination of ipoaLisEntry and IP over ATM interface.
1.3.6.1.2.1.10.46.1.3.1RowipoaLisIfMappingEntrynot-accessiblecurrentDefines an entry in the ipoaLisIfMappingTable.
1.3.6.1.2.1.10.46.1.3.1.1ColumnipoaLisIfMappingIfIndexnot-accessiblecurrentThe ipAdEntIfIndex object from an ipAddrEntry is used as an index to this table when its ipAdEntAddr is in the subnet implied by ipoaLisSubnetAddr.
1.3.6.1.2.1.10.46.1.3.1.2ColumnipoaLisIfMappingRowStatusread-createcurrentThis object allows entries to be created and deleted in the ipoaLisIfMappingTable.
1.3.6.1.2.1.10.46.1.4TableipoaArpClientTablenot-accessiblecurrentThe ATMARP clients running on this system.
1.3.6.1.2.1.10.46.1.4.1RowipoaArpClientEntrynot-accessiblecurrentInformation about a single ATMARP Client. Clients can be started and stopped by adding and removing entries from this table. An entry in the ipoaArpClientTable…
1.3.6.1.2.1.10.46.1.4.1.1ColumnipoaArpClientAtmAddrread-createcurrentThe ATM address of the client.
1.3.6.1.2.1.10.46.1.4.1.2ColumnipoaArpClientSrvrInUseread-onlycurrentThe ATM address of the ATMARP Server, ipoaArpRemoteSrvrAtmAddr, in use by this client. A zero length octet string implies that communication with a Remote ATMA…
1.3.6.1.2.1.10.46.1.4.1.3ColumnipoaArpClientInArpInReqsread-onlycurrentThe number of InATMARP requests received by this client.
1.3.6.1.2.1.10.46.1.4.1.4ColumnipoaArpClientInArpOutReqsread-onlycurrentThe number of InATMARP requests sent by this client.
1.3.6.1.2.1.10.46.1.4.1.5ColumnipoaArpClientInArpInRepliesread-onlycurrentThe number of InATMARP replies received by this client.
1.3.6.1.2.1.10.46.1.4.1.6ColumnipoaArpClientInArpOutRepliesread-onlycurrentTotal number of InATMARP replies sent by this client.
1.3.6.1.2.1.10.46.1.4.1.7ColumnipoaArpClientInArpInvalidInReqsread-onlycurrentThe number of times that this client detected an invalid InATMARP request.
1.3.6.1.2.1.10.46.1.4.1.8ColumnipoaArpClientInArpInvalidOutReqsread-onlycurrentThe number of times that this client did not receive an InATMARP reply.
1.3.6.1.2.1.10.46.1.4.1.9ColumnipoaArpClientArpInReqsread-onlycurrentTotal number of ATMARP requests received by this client.
1.3.6.1.2.1.10.46.1.4.1.10ColumnipoaArpClientArpOutReqsread-onlycurrentTotal number of ATMARP requests sent by this client.
1.3.6.1.2.1.10.46.1.4.1.11ColumnipoaArpClientArpInRepliesread-onlycurrentTotal number of ATMARP replies received by this client.
1.3.6.1.2.1.10.46.1.4.1.12ColumnipoaArpClientArpOutRepliesread-onlycurrentTotal number of ATMARP replies sent by this client.
1.3.6.1.2.1.10.46.1.4.1.13ColumnipoaArpClientArpInNaksread-onlycurrentTotal number of negative ATMARP replies received by this client.
1.3.6.1.2.1.10.46.1.4.1.14ColumnipoaArpClientArpOutNaksread-onlycurrentTotal number of negative ATMARP replies sent by this client. Classic IP and ARP over ATM does not require an ATMARP client to transmit an ATMARP_NAK upon recei…
1.3.6.1.2.1.10.46.1.4.1.15ColumnipoaArpClientArpUnknownOpsread-onlycurrentThe number of times that this client received an ATMARP message with an operation code for which it is not coded to support.
1.3.6.1.2.1.10.46.1.4.1.16ColumnipoaArpClientArpNoSrvrRespsread-onlycurrentThe number of times this client failed to receive a response from a ATMARP Server within the ipoaLisTimeout value for ipoaLisRetries times. This may imply that…
1.3.6.1.2.1.10.46.1.4.1.17ColumnipoaArpClientRowStatusread-createcurrentThis object allows entries to be created and deleted from the ipoaArpClientTable.
1.3.6.1.2.1.10.46.1.5TableipoaArpSrvrTablenot-accessiblecurrentThe ATMARP Servers running on this system.
1.3.6.1.2.1.10.46.1.5.1RowipoaArpSrvrEntrynot-accessiblecurrentInformation about an ATMARP Server within a LIS. An entry in this table has two indexes: first ipAdEntAddr, which is the IP address that this system uses as a …
1.3.6.1.2.1.10.46.1.5.1.1ColumnipoaArpSrvrAddrnot-accessiblecurrentThe ATM address of the ATMARP Server.
1.3.6.1.2.1.10.46.1.5.1.2ColumnipoaArpSrvrLisread-createcurrentThe subnet address that identifies the LIS with which this server is associated.
1.3.6.1.2.1.10.46.1.5.1.3ColumnipoaArpSrvrInArpInReqsread-onlycurrentThe number of InATMARP requests received by this ATMARP Server.
1.3.6.1.2.1.10.46.1.5.1.4ColumnipoaArpSrvrInArpOutReqsread-onlycurrentThe number of InATMARP requests sent by this ATMARP Server.
1.3.6.1.2.1.10.46.1.5.1.5ColumnipoaArpSrvrInArpInRepliesread-onlycurrentThe number of InATMARP replies received by this ATMARP Server.
1.3.6.1.2.1.10.46.1.5.1.6ColumnipoaArpSrvrInArpOutRepliesread-onlycurrentThe number of InATMARP replies sent by this ATMARP Server.
1.3.6.1.2.1.10.46.1.5.1.7ColumnipoaArpSrvrInArpInvalidInReqsread-onlycurrentThe number of invalid InATMARP requests received by this ATMARP Server.
1.3.6.1.2.1.10.46.1.5.1.8ColumnipoaArpSrvrInArpInvalidOutReqsread-onlycurrentThe number of times that this server did not receive an InATMARP reply.
1.3.6.1.2.1.10.46.1.5.1.9ColumnipoaArpSrvrArpInReqsread-onlycurrentTotal number of ATMARP requests received by this ATMARP Server.
1.3.6.1.2.1.10.46.1.5.1.10ColumnipoaArpSrvrArpOutRepliesread-onlycurrentTotal number of ATMARP replies sent by this ATMARP Server.
1.3.6.1.2.1.10.46.1.5.1.11ColumnipoaArpSrvrArpOutNaksread-onlycurrentTotal number of negative ATMARP replies sent by this ATMARP Server.
1.3.6.1.2.1.10.46.1.5.1.12ColumnipoaArpSrvrArpDupIpAddrsread-onlycurrentThe number of times that a duplicate IP address was detected by this ATMARP Server.
1.3.6.1.2.1.10.46.1.5.1.13ColumnipoaArpSrvrArpUnknownOpsread-onlycurrentThe number of times that this ATMARP Server received an ATMARP message with an operation code for which it is not coded to support.
1.3.6.1.2.1.10.46.1.5.1.14ColumnipoaArpSrvrRowStatusread-createcurrentThis object allows entries to be created and deleted from the ipoaArpSrvrTable.
1.3.6.1.2.1.10.46.1.6TableipoaArpRemoteSrvrTablenot-accessiblecurrentA table of non-local ATMARP Servers associated with a LIS. An entry in this table has three indexes: first the ipoaLisSubnetAddr of the LIS for which the corre…
1.3.6.1.2.1.10.46.1.6.1RowipoaArpRemoteSrvrEntrynot-accessiblecurrentInformation about one non-local ATMARP Server.
1.3.6.1.2.1.10.46.1.6.1.1ColumnipoaArpRemoteSrvrAtmAddrnot-accessiblecurrentThe ATM address of the remote ATMARP Server.
1.3.6.1.2.1.10.46.1.6.1.2ColumnipoaArpRemoteSrvrRowStatusread-createcurrentThis object allows entries to be created and deleted from the ipoaArpRemoteSrvrTable. Deleting an ipoaArpRemoteSrvrEntry (by setting this object to destroy(6))…
1.3.6.1.2.1.10.46.1.6.1.3ColumnipoaArpRemoteSrvrIfIndexnot-accessiblecurrentThe ifIndex of the interface that the VC to the Remote ATMARP Server is associated with.
1.3.6.1.2.1.10.46.1.6.1.4ColumnipoaArpRemoteSrvrIpAddrread-onlycurrentThe IP Address of the Remote ATMARP Server. A value of 0.0.0.0 implies that this address isn't known.
1.3.6.1.2.1.10.46.1.6.1.5ColumnipoaArpRemoteSrvrAdminStatusread-createcurrentThe desired state for use of the ATMARP Server represented by an entry in this table. ipoaArpRemoteSrvrAdminStatus values: up(1) - Attempt to activate use of t…
1.3.6.1.2.1.10.46.1.6.1.6ColumnipoaArpRemoteSrvrOperStatusread-onlycurrentThe current operational state for use of a Remote ATMARP Server. An up(1) entry has a VC established to the respective Remote ATMARP Server: up(1) - A VC exist…
1.3.6.1.2.1.10.46.1.7TableipoaVcTablenot-accessiblecurrentA system that supports IP over ATM is an IP system and therefore MUST support all of the appropriate tables in the SNMPv2-MIB (RFC 1907), the IF-MIB (RFC 2233)…
1.3.6.1.2.1.10.46.1.7.1RowipoaVcEntrynot-accessiblecurrentA VC (permanent or switched) that this host or server has opened with another member of a LIS. Additional information can be determined about the VC from the A…
1.3.6.1.2.1.10.46.1.7.1.1ColumnipoaVcVpinot-accessiblecurrentThe VPI value for the Virtual Circuit.
1.3.6.1.2.1.10.46.1.7.1.2ColumnipoaVcVcinot-accessiblecurrentThe VCI value for the Virtual Circuit.
1.3.6.1.2.1.10.46.1.7.1.3ColumnipoaVcTyperead-onlycurrentThe type of the Virtual Circuit.
1.3.6.1.2.1.10.46.1.7.1.4ColumnipoaVcNegotiatedEncapsTyperead-onlycurrentThe encapsulation type used when communicating over this circuit.
1.3.6.1.2.1.10.46.1.7.1.5ColumnipoaVcNegotiatedMturead-onlycurrentThe MTU used when communicating over this circuit.
1.3.6.1.2.1.10.46.1.8TableipoaConfigPvcTablenot-accessiblecurrentThis table MUST be supported when PVCs are intended to be supported in order to enable the setup of PVCs for use by IP.
1.3.6.1.2.1.10.46.1.8.1RowipoaConfigPvcEntrynot-accessiblecurrentDefines a single PVC that exists at this host for use by IP.
1.3.6.1.2.1.10.46.1.8.1.1ColumnipoaConfigPvcIfIndexnot-accessiblecurrentThe ifIndex of the ATM Interface that this PVC is associated with.
1.3.6.1.2.1.10.46.1.8.1.2ColumnipoaConfigPvcVpinot-accessiblecurrentThe VPI value for the Virtual Circuit.
1.3.6.1.2.1.10.46.1.8.1.3ColumnipoaConfigPvcVcinot-accessiblecurrentThe VCI value for the Virtual Circuit.
1.3.6.1.2.1.10.46.1.8.1.4ColumnipoaConfigPvcDefaultMturead-createcurrentClassical IP and ARP over ATM allows use of other MTU values for PVCs but considers how a value other than 9180 could be selected to be out of scope. ipoaConfi…
1.3.6.1.2.1.10.46.1.8.1.5ColumnipoaConfigPvcRowStatusread-createcurrentThis object allows rows to be created and deleted in the ipoaConfigPvcTable. Creation of an entry in this table should eventually result in the creation of an …
1.3.6.1.2.1.10.46.2NodeipoaNotifications
1.3.6.1.2.1.10.46.2.0NodeipoaTrapPrefix
1.3.6.1.2.1.10.46.2.0.1NotificationipoaMtuExceededcurrentA frame was received that exceeds the negotiated MTU size. The VPI and VCI of the VC for which this condition was detected can be determined from the index val…
1.3.6.1.2.1.10.46.2.0.2NotificationipoaDuplicateIpAddresscurrentThe ATMARP Server has detected more than one ATM end point attempting to associate the same IP address with different ATM addresses.
1.3.6.1.2.1.10.46.2.0.3NotificationipoaLisCreatecurrentGeneration of this trap occurs when an ipoaLisEntry is created while the ipoaLisTrapEnable.0 object has the value enabled(1).
1.3.6.1.2.1.10.46.2.0.4NotificationipoaLisDeletecurrentGeneration of this trap occurs when an ipoaLisEntry is deleted while the ipoaLisTrapEnable.0 object has the value enabled(1).
1.3.6.1.2.1.10.46.3NodeipoaConformance
1.3.6.1.2.1.10.46.3.1NodeipoaGroups
1.3.6.1.2.1.10.46.3.1.1GroupipoaGeneralGroupcurrentThis group is mandatory for all IP over ATM entities.
1.3.6.1.2.1.10.46.3.1.2GroupipoaClientGroupcurrentThis group is mandatory for all hosts where an IP over ATM client is present.
1.3.6.1.2.1.10.46.3.1.3GroupipoaSrvrGroupcurrentThis group is mandatory for all hosts where ATMARP Servers are present.
1.3.6.1.2.1.10.46.3.1.4GroupipoaBasicNotificationsGroupcurrentThe notification which an IP over ATM entity is required to implement.
1.3.6.1.2.1.10.46.3.1.5GroupipoaSrvrNotificationsGroupcurrentThe notification which an IP over ATM ATMARP Server is required to implement.
1.3.6.1.2.1.10.46.3.1.6GroupipoaLisNotificationsGroupcurrentThe LIS-related notifications which are required to be implemented by an IP over ATM ATMARP server, as well as by any IP over ATM client which allows ipoaLisTr…
1.3.6.1.2.1.10.46.3.1.7GroupipoaLisTableGroupcurrentThis group is mandatory for all entities which support IP over ATM SVCs. Support of objects in this group by IP over ATM clients which only support IP over ATM…
1.3.6.1.2.1.10.46.3.2NodeipoaCompliances
1.3.6.1.2.1.10.46.3.2.1ComplianceipoaComplianceread-onlycurrentThe compliance statement for agents that support the IPOA-MIB.
Type Definitions
NameSyntaxStatusDescription
IpoaAtmAddrOCTET STRING (SIZE(0..40))currentThe ATM address used by the network entity. The semantics are implied by the length. The address types are: - no address (0 octets) - E.164 (8 octets) - NSAP (20 octets) In addition, when subaddresses are used IpoaAtmAd…
IpoaAtmConnKindINTEGER { pvc(1), svcIncoming(2), svcOutgoing(3), spvcInitiator(4), spvcTarget(5) }currentThe use of call control. The use is as follows: pvc(1) Virtual link of a PVC. Should not be used in a PVC/SVC (i.e., SPVC) crossconnect. svcIncoming(2) Virtual link established after a received signaling request to setu…
IpoaEncapsTypeINTEGER { llcSnap(1), vcMuxed(2), other(3) }currentThe encapsulation type used on a VC.
IpoaVciIntegerInteger32 (0..65535)currentAn integer large enough to contain the value of a VCI.
IpoaVpiIntegerInteger32 (0..255)currentAn integer large enough to contain the value of a VPI.
MIB Viewer