ITOUCH-BRIDGE-MIB
30 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.5 | NodebridgeDep | |||
| 1.3.6.1.4.1.33.19 | NodexBridge | |||
| 1.3.6.1.4.1.33.19.1 | NodexBridgeSystem | |||
| 1.3.6.1.4.1.33.19.1.1 | ScalarbridgeState | read-write | mandatory | Controls whether the bridge will perform bridging. |
| 1.3.6.1.4.1.33.19.1.2 | ScalarbridgeEarlyLoopState | read-write | mandatory | Controls whether the bridge will implement the early loop detection algorithm of restarting the Spanning Tree Protocol when a packet is received from a source … |
| 1.3.6.1.4.1.33.19.1.3 | ScalarbridgeEarlyLoopCount | read-only | mandatory | The number of times that an early loop was detected while the early loop state was enabled. |
| 1.3.6.1.4.1.33.19.1.4 | ScalarbridgeEarlyLoopAddress | read-only | mandatory | The last address to cause an early loop to be detected while the early loop state was enabled. |
| 1.3.6.1.4.1.33.19.1.5 | ScalarbridgeSpanningTreeState | read-write | mandatory | Controls whether the bridge will run the Spanning Tree Protocol. |
| 1.3.6.1.4.1.33.19.1.6 | ScalarbridgeFilterDiscardTimeout | read-write | mandatory | The number of seconds before an inactive filter is deleted. Learned filters become inactive when the use timeout (dot1dTpAgingTime) has been exceeded. |
| 1.3.6.1.4.1.33.19.1.7 | ScalarbridgeTopologyState | read-only | mandatory | Indicates whether the Spanning Tree Protocol's topology is stable or changing. |
| 1.3.6.1.4.1.33.19.1.8 | ScalarbridgeTopologyChangeAddr | read-only | mandatory | The ethernet address of the last bridge from which a Topology Change Notification packet was received. |
| 1.3.6.1.4.1.33.19.3 | NodexBridgeProtocol | |||
| 1.3.6.1.4.1.33.19.3.1 | ScalarbridgeProtocolFilterState | read-write | mandatory | Controls whether protocol filtering is active. |
| 1.3.6.1.4.1.33.19.3.2 | ScalarbridgeProtocolDefaultPriority | read-write | mandatory | Controls the default priority if no entry exists for the protocol. |
| 1.3.6.1.4.1.33.19.3.3 | TablebridgeProtocolTable | not-accessible | mandatory | A list of bridge protocol filters. |
| 1.3.6.1.4.1.33.19.3.3.1 | RowbridgeProtocolEntry | not-accessible | mandatory | Bridge protocol filter entry. |
| 1.3.6.1.4.1.33.19.3.3.1.1 | ColumnbridgeProtocolProtocol | read-only | mandatory | The protocol type associated with the entry. The value 65536 is for all 802.3 MAC frames. |
| 1.3.6.1.4.1.33.19.3.3.1.2 | ColumnbridgeProtocolName | read-write | mandatory | The name associated with the protocol. |
| 1.3.6.1.4.1.33.19.3.3.1.3 | ColumnbridgeProtocolPriority | read-write | mandatory | The priority or action to take with the protocol. |
| 1.3.6.1.4.1.33.19.3.3.1.4 | ColumnbridgeProtocolUses | read-only | mandatory | The number of times the filter has been used. |
| 1.3.6.1.4.1.33.19.3.3.1.5 | ColumnbridgeProtocolStatus | read-write | mandatory | The status of the protocol entry. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.19.4 | NodexBridgeFilter | |||
| 1.3.6.1.4.1.33.19.4.1 | TablebridgeFilterTable | not-accessible | mandatory | A list of bridge filters. |
| 1.3.6.1.4.1.33.19.4.1.1 | RowbridgeFilterEntry | not-accessible | mandatory | Bridge filter entry. |
| 1.3.6.1.4.1.33.19.4.1.1.1 | ColumnbridgeFilterForwardSubPort | read-write | mandatory | The unique identifier from which the address has been seen within the port. It is the DLCI for frame relay or VC for X25. |
| 1.3.6.1.4.1.33.19.4.1.1.2 | ColumnbridgeFilterUses | read-only | mandatory | The number of times the filter has been used for forwarding packets. |
| 1.3.6.1.4.1.33.19.4.1.1.3 | ColumnbridgeFilterAge | read-only | mandatory | The number of seconds that a learned filter has been active or inactive. This value has no meaning for non-learned filters. |
| 1.3.6.1.4.1.33.19.4.2 | TablebridgeFilterLinkTable | not-accessible | mandatory | Bridge filtering characteristics of all links. |
| 1.3.6.1.4.1.33.19.4.2.1 | RowbridgeFilterLinkEntry | not-accessible | mandatory | Bridge filtering characteristics of a specific link. |
| 1.3.6.1.4.1.33.19.4.2.1.1 | ColumnbridgeFilterLinkOverflowCam | read-write | mandatory | Identifies the number of extra entries in a hardware assist filter CAM that the user wants to have available to cover CAM entry overflow conditions. If filteri… |