ITOUCH-CONCENTRATOR-MIB
69 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.25 | NodexConcentrator | |||
| 1.3.6.1.4.1.33.25.1 | ScalarconcentratorMode | read-write | mandatory | This variable controls the ring mode of the chassis. |
| 1.3.6.1.4.1.33.25.2 | ScalarconcentratorManagement | read-write | mandatory | This variable controls the ability to manage token ring concentrators. |
| 1.3.6.1.4.1.33.25.3 | ScalarconcentratorBuildTopology | read-write | mandatory | This variable causes the chassis token ring topology database to be constructed. |
| 1.3.6.1.4.1.33.25.4 | ScalarconcentratorTopologyLastBuild | read-only | mandatory | This variable contains the value of sysUpTime at the time the chassis token ring topology database was last constructed. |
| 1.3.6.1.4.1.33.25.5 | ScalarconcentratorChassisRingDefaults | read-write | mandatory | This variable causes the chassis ring area of NVS to be set to defaults. |
| 1.3.6.1.4.1.33.25.6 | TableconcentratorSlotTable | not-accessible | mandatory | Table of descriptive and status information about a Token Ring Concentrator. |
| 1.3.6.1.4.1.33.25.6.1 | RowconcentratorSlotEntry | not-accessible | mandatory | An entry in the table containing information about a specific concentrator. |
| 1.3.6.1.4.1.33.25.6.1.1 | ColumnconcentratorSlotIndex | read-only | mandatory | This variable identifies the slot of the chassis. |
| 1.3.6.1.4.1.33.25.6.1.2 | ColumnconcentratorSlotIOType | read-only | mandatory | This variable represents the type of the I/O card. |
| 1.3.6.1.4.1.33.25.6.1.3 | ColumnconcentratorSlotIOFirmwareVersion | read-only | mandatory | This variable represents the revision level of the firmware on the I/O card. |
| 1.3.6.1.4.1.33.25.6.1.4 | ColumnconcentratorSlotIOOperStatus | read-only | mandatory | This variable represents the current operating status of the I/O card. |
| 1.3.6.1.4.1.33.25.6.1.5 | ColumnconcentratorSlotUptime | read-only | mandatory | This variable contains the value of sysUpTime at the time the concentrator was last reset. |
| 1.3.6.1.4.1.33.25.6.1.6 | ColumnconcentratorSlotNumPorts | read-only | mandatory | This variable represents the number of Token Ring ports supported by the concentrator. |
| 1.3.6.1.4.1.33.25.7 | TableconcentratorSlotRingTable | not-accessible | mandatory | Table of descriptive and status information about the rings of a controller. |
| 1.3.6.1.4.1.33.25.7.1 | RowconcentratorSlotRingEntry | not-accessible | mandatory | An entry in the table containing information about a specific ring. |
| 1.3.6.1.4.1.33.25.7.1.1 | ColumnconcentratorSlotSlotIndex | read-only | mandatory | This variable identifies the slot of the chassis. |
| 1.3.6.1.4.1.33.25.7.1.2 | ColumnconcentratorSlotRingIndex | read-only | mandatory | This variable identifies the ring within the slot. |
| 1.3.6.1.4.1.33.25.7.1.3 | ColumnconcentratorSlotRingAdminName | read-write | mandatory | This variable represents the user defined name of the ring. |
| 1.3.6.1.4.1.33.25.7.1.4 | ColumnconcentratorSlotRingAdminSpeed | read-write | mandatory | This variable represents the user defined speed of the ring. |
| 1.3.6.1.4.1.33.25.7.1.5 | ColumnconcentratorSlotRingAdminState | read-write | mandatory | This variable defines whether the slot ring is to be inserted into the defined chassis ring or is to be isolated. |
| 1.3.6.1.4.1.33.25.7.1.6 | ColumnconcentratorSlotRingZero | read-write | mandatory | This variable is used to control the slot ring's counters. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. |
| 1.3.6.1.4.1.33.25.7.1.7 | ColumnconcentratorSlotRingSinceZero | read-only | mandatory | This variable reflects the number of time ticks since the counters were last zeroed. This variable is set to zero when concentratoSlotRingZero is written with … |
| 1.3.6.1.4.1.33.25.7.1.8 | ColumnconcentratorSlotRingChassisRing | read-write | mandatory | This variable represents the chassis ring into which the slot ring is to be inserted if it is to be inserted. |
| 1.3.6.1.4.1.33.25.7.1.9 | ColumnconcentratorSlotRingOperName | read-only | mandatory | This variable represents the name currently being used to identify the slot ring. If inserted, this name will be the user defined name of the chassis ring into… |
| 1.3.6.1.4.1.33.25.7.1.10 | ColumnconcentratorSlotRingOperSpeed | read-only | mandatory | This variable represents the current speed of the slot ring. If inserted, this speed will be the user defined speed of the chassis ring into which it is insert… |
| 1.3.6.1.4.1.33.25.7.1.11 | ColumnconcentratorSlotRingOperState | read-only | mandatory | This variable indicates whether the slot ring is inserted into the defined chassis ring or is isolated. |
| 1.3.6.1.4.1.33.25.7.1.12 | ColumnconcentratorSlotRingChassisRingsAllowed | read-only | mandatory | The list of chassis rings into which this slot ring may be inserted. The OCTET STRING contains a bit map, with a bit for 'none' (indicating it may be isolated)… |
| 1.3.6.1.4.1.33.25.8 | TableconcentratorChassisRingTable | not-accessible | mandatory | Table of descriptive and status information about the rings of a the chassis. |
| 1.3.6.1.4.1.33.25.8.1 | RowconcentratorChassisRingEntry | not-accessible | mandatory | An entry in the table containing information about a specific ring. |
| 1.3.6.1.4.1.33.25.8.1.1 | ColumnconcentratorChassisRingIndex | read-only | mandatory | This variable identifies the ring of the chassis. |
| 1.3.6.1.4.1.33.25.8.1.2 | ColumnconcentratorChassisRingName | read-write | mandatory | This variable represents the name of the ring. All segments of a given chassis ring will have the same base name, All segment of that ring will appear as 'base… |
| 1.3.6.1.4.1.33.25.8.1.3 | ColumnconcentratorChassisRingSpeed | read-write | mandatory | This variable indicates the speed of the ring segment. All segments of a given chassis ring are at the same speed. |
| 1.3.6.1.4.1.33.25.8.1.4 | ColumnconcentratorChassisRingTopologyChanges | read-only | mandatory | This variable reflects the number of times the topology has changed for this ring. This variable is set to zero when concentratorChassisRingZero is written wit… |
| 1.3.6.1.4.1.33.25.8.1.5 | ColumnconcentratorChassisRingZero | read-write | mandatory | This variable is used to control the ring's counters. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. |
| 1.3.6.1.4.1.33.25.8.1.6 | ColumnconcentratorChassisRingSinceZero | read-only | mandatory | This variable reflects the number of time ticks since the counters were last zeroed. This variable is set to zero when concentratoChassisRingZero is written wi… |
| 1.3.6.1.4.1.33.25.9 | TableconcentratorChassisRingTopologyTable | not-accessible | mandatory | Table of descriptive and status information about the segments of the chassis rings. |
| 1.3.6.1.4.1.33.25.9.1 | RowconcentratorChassisRingTopologyEntry | not-accessible | mandatory | An entry in the table containing information about a specific ring segment. |
| 1.3.6.1.4.1.33.25.9.1.1 | ColumnconcentratorChassisRingTopologySlotIndex | read-only | mandatory | This variable identifies a slot number that is included in the ring segment. |
| 1.3.6.1.4.1.33.25.9.1.2 | ColumnconcentratorChassisRingTopologyRingIndex | read-only | mandatory | This variable identifies the ring of the chassis. |
| 1.3.6.1.4.1.33.25.9.1.3 | ColumnconcentratorChassisRingTopologyWrapUp | read-only | mandatory | This variable represents the upper wrap state for the chassis ring which passes through this slot. By setting this variable to Wrap, the user can create a segm… |
| 1.3.6.1.4.1.33.25.9.1.4 | ColumnconcentratorChassisRingTopologyWrapDown | read-only | mandatory | This variable represents the lower wrap state for the chassis ring which passes through this slot. By setting this variable to Wrap, the user can create a segm… |
| 1.3.6.1.4.1.33.25.9.1.5 | ColumnconcentratorChassisRingTopologyUpState | read-only | mandatory | This variable represents the type of upper wrap for the chassis ring which passes through this slot. |
| 1.3.6.1.4.1.33.25.9.1.6 | ColumnconcentratorChassisRingTopologyDownState | read-only | mandatory | This variable represents the type of lower wrap for the chassis ring which passes through this slot. |
| 1.3.6.1.4.1.33.25.9.1.7 | ColumnconcentratorChassisRingTopologySegment | read-only | mandatory | This variable represents the segment number for the chassis ring which passes through this slot. |
| 1.3.6.1.4.1.33.25.9.1.8 | ColumnconcentratorChassisRingTopologyName | read-only | mandatory | This variable represents the name of the ring segment. The ring segment name is the base ring name with '-segment number' appended to the end. |
| 1.3.6.1.4.1.33.25.9.1.9 | ColumnconcentratorChassisRingTopologySpeed | read-only | mandatory | This variable indicates the speed of the ring segment. All segments of a given chassis ring are at the same speed as the parent ring. |
| 1.3.6.1.4.1.33.25.9.1.10 | ColumnconcentratorChassisRingTopologyCardType | read-only | mandatory | This variable represents the type of the I/O card. |
| 1.3.6.1.4.1.33.25.9.1.11 | ColumnconcentratorChassisRingTopologyAutoUpChanges | read-only | mandatory | This variable reflects the number of times the topology has changed for this ring due to a dynamic wrap up. This variable is set to zero when concentratorSlotR… |
| 1.3.6.1.4.1.33.25.9.1.12 | ColumnconcentratorChassisRingTopologyAutoDownChanges | read-only | mandatory | This variable reflects the number of times the topology has changed for this ring due to a dynamic wrap down. This variable is set to zero when concentratorSlo… |
| 1.3.6.1.4.1.33.25.10 | TableconcentratorPortTable | not-accessible | mandatory | Table of information and status concerning the ports of a concentrator. |
| 1.3.6.1.4.1.33.25.10.1 | RowconcentratorPortEntry | not-accessible | mandatory | An entry in the table containing control and status information for a port. |
| 1.3.6.1.4.1.33.25.10.1.1 | ColumnconcentratorPortSlotIndex | read-only | mandatory | This variable identifies the slot of the chassis. |
| 1.3.6.1.4.1.33.25.10.1.2 | ColumnconcentratorPortIndex | read-only | mandatory | This variable identifies target port. |
| 1.3.6.1.4.1.33.25.10.1.3 | ColumnconcentratorPortName | read-write | mandatory | This variable represents the user defined name of the port. |
| 1.3.6.1.4.1.33.25.10.1.4 | ColumnconcentratorPortType | read-only | mandatory | This variable represents the type of connector provided for the port. |
| 1.3.6.1.4.1.33.25.10.1.5 | ColumnconcentratorPortZero | read-write | mandatory | This variable is used to control the ports counters. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. |
| 1.3.6.1.4.1.33.25.10.1.6 | ColumnconcentratorPortSinceZero | read-only | mandatory | This variable reflects the number of time ticks since the counters were las zeroed. This variable is set to zero when concentratorPortZero is written with the … |
| 1.3.6.1.4.1.33.25.10.1.7 | ColumnconcentratorPortAdminState | read-write | mandatory | This variable reflects the enable/disable state of the port. |
| 1.3.6.1.4.1.33.25.10.1.8 | ColumnconcentratorPortOperState | read-only | mandatory | This variable reflects the enable/disable state of the port. |
| 1.3.6.1.4.1.33.25.10.1.9 | ColumnconcentratorPortInsertions | read-only | mandatory | This variable reflects the number of times the port was inserted into the ring. |
| 1.3.6.1.4.1.33.25.10.1.10 | ColumnconcentratorPortInsertFailures | read-only | mandatory | This variable reflects the number of times the port was not inserted due to a data rate mismatch. |
| 1.3.6.1.4.1.33.25.10.1.11 | ColumnconcentratorPortAdminInsert | read-write | mandatory | This variable reflects the desired insertion of the port. Auto indicates to insert the port into the first slot ring with a matching data rate beginning with 1. |
| 1.3.6.1.4.1.33.25.10.1.12 | ColumnconcentratorPortOperInsert | read-only | mandatory | This variable reflects the slot ring to which the port is attached. |
| 1.3.6.1.4.1.33.25.10.1.13 | ColumnconcentratorPortSpeed | read-only | mandatory | This variable reflects the measured speed of the port. |
| 1.3.6.1.4.1.33.25.10.1.14 | ColumnconcentratorPortAdminLoopback | read-write | mandatory | This variable reflects the whether this port will be inserted into a ring or the data loop backed. |
| 1.3.6.1.4.1.33.25.10.1.15 | ColumnconcentratorPortStationType | read-write | mandatory | This variable reflects the concentrator port type. |
| 1.3.6.1.4.1.33.25.10.1.16 | ColumnconcentratorPortAdminTrunkInsert | read-write | mandatory | This variable is used to control the insertion of trunk ports. When set to 'execute' the trunk port will be inserted into the ring immediately and not wait for… |
| 1.3.6.1.4.1.33.25.10.1.17 | ColumnconcentratorPortSlotRingsAllowed | read-only | mandatory | The list of slot rings into which this port may be inserted. The OCTET STRING contains a bit map, with a bit for 'none' (indicating it may be isolated) and one… |