ITOUCH-INTERNET-MIB
625 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.4 | NodexInternetDep | |||
| 1.3.6.1.4.1.33.10 | NodexInternet | |||
| 1.3.6.1.4.1.33.10.1 | NodexIp | |||
| 1.3.6.1.4.1.33.10.1.1 | ScalaripGatewayAddress1 | read-write | mandatory | The internet address of the system's primary (first choice) gateway. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET PRIMARY G… |
| 1.3.6.1.4.1.33.10.1.2 | ScalaripGatewayAddress2 | read-write | mandatory | The internet address of the system's secondary (second choice) gateway. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET SECOND… |
| 1.3.6.1.4.1.33.10.1.3 | ScalaripAutoSubnetMask | read-write | deprecated | A control for automatic determination of subnet mask. 'disabled' indicates the system must use the mask as configured by the network manager. 'enabled' indicat… |
| 1.3.6.1.4.1.33.10.1.4 | ScalaripReassembly | read-write | mandatory | A control for reassembly of IP fragments. Corresponds directly to SERVER INTERNET REASSEMBLY and the value labeled 'Reassembly:' in the SERVER INTERNET CHARACT… |
| 1.3.6.1.4.1.33.10.1.5 | ScalaripFragmentsQueuedHigh | read-only | mandatory | Highest number of IP fragments queued. |
| 1.3.6.1.4.1.33.10.1.6 | ScalaripFragmentsQueuedCurrent | read-only | mandatory | Current number of IP fragments queued. |
| 1.3.6.1.4.1.33.10.1.7 | TableipGenAdExtTable | not-accessible | mandatory | Table of additional fields indexed by local IP address. An entry in this table is created or deleted when an entry in the MIB-II ipAddrTable is created or dele… |
| 1.3.6.1.4.1.33.10.1.7.1 | RowipGenAdExtEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.10.1.7.1.1 | ColumnipGenAdEntExtType | read-write | mandatory | The way this local IP address is used, which may imply alternate, more intuitive ways to set it. primary general purpose for ordinary use rotary identificaton … |
| 1.3.6.1.4.1.33.10.1.7.1.2 | ColumnipGenAdEntExtBroadcast | read-write | mandatory | Outgoing IP broadcast address associated with this local address. Value may be confined to logical compatibility with associated network mask. |
| 1.3.6.1.4.1.33.10.1.8 | ScalaripARPTimeout | read-write | mandatory | A control to set the length of time in minutes before an unused ARP entry is purged from the ARP table. The default is 60 minutes. Corresponds directly to the … |
| 1.3.6.1.4.1.33.10.1.9 | ScalaripGatewayPingInterval | read-write | mandatory | A control to set the interval of time in seconds between successive pings to the primary gateway so as to determine its status. The default is 60 seconds. Corr… |
| 1.3.6.1.4.1.33.10.1.11 | ScalaripConfigureBootp | read-write | mandatory | Control to use the BOOTP protocol upon startup to learn the unit's own internet address, subnet mask, primary and secondary gateway servers, domain name server… |
| 1.3.6.1.4.1.33.10.2 | NodexTcp | |||
| 1.3.6.1.4.1.33.10.2.1 | TabletcpPortTable | not-accessible | mandatory | A list of TCP character port entries. |
| 1.3.6.1.4.1.33.10.2.1.1 | RowtcpPortEntry | not-accessible | mandatory | TCP parameter values for a character port. |
| 1.3.6.1.4.1.33.10.2.1.1.1 | ColumntcpPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.2.1.1.2 | ColumntcpPortConnectByAddress | read-write | mandatory | A control for requesting outgoing connection by internet address. 'disabled' indicates outgoing connections must be by Domain name. 'enabled' indicates that ou… |
| 1.3.6.1.4.1.33.10.2.1.1.3 | ColumntcpPortWindowSize | read-write | mandatory | Size of the TCP window for TCP connections on the port. Corresponds directly to PORT INTERNET TCP WINDOW SIZE and the value labeled 'TCP Window Size:' in the P… |
| 1.3.6.1.4.1.33.10.2.1.1.4 | ColumntcpPortKeepAliveLimit | read-write | mandatory | Number of minutes to maintain a TCP connection without response to keep-alive communication. A value of zero indicates no limit. |
| 1.3.6.1.4.1.33.10.2.2 | ScalartcpResequencing | read-write | mandatory | A control for keeping TCP messages received out-of-order to resequence them before using them. Corresponds directly to SERVER INTERNET TCP RESEQUENCING and the… |
| 1.3.6.1.4.1.33.10.2.3 | ScalartcpQueuedSegs | read-only | mandatory | Number of TCP segments in the TCP receive queues. Corresponds directly to the value labeled 'TCP Packets Queued:' in the SERVER INTERNET COUNTERS display. |
| 1.3.6.1.4.1.33.10.2.4 | ScalartcpDiscardSegs | read-only | mandatory | Number of TCP segments discarded due to exceeding the TCP receive queue limit. Corresponds directly to the value labeled 'TCP Packets Discarded:' in the SERVER… |
| 1.3.6.1.4.1.33.10.2.5 | ScalartcpConnectTimer | read-write | mandatory | Number of seconds to attempt a TCP connection without a response from the other side. The default value is 32 seconds. Corresponds directly to the SERVER INTER… |
| 1.3.6.1.4.1.33.10.2.6 | ScalartcpLocalPortBase | read-write | mandatory | The value for port 0's tcp source port number. |
| 1.3.6.1.4.1.33.10.2.7 | ScalartcpLocalPortIncrement | read-write | mandatory | The value by which the tcp source port number increases for each port greater than port 0. |
| 1.3.6.1.4.1.33.10.2.8 | ScalartcpRoutingTblSz | read-write | mandatory | A control to set the size of the working routing table. The default is the current size of the table (64). |
| 1.3.6.1.4.1.33.10.2.9 | ScalartcpDataSendDelay | read-write | mandatory | A control to delay for the specified number of 10 millisecond ticks before sending the userdata string over the telnet connection. |
| 1.3.6.1.4.1.33.10.2.10 | ScalartcpAckDelay | read-write | mandatory | A Control to prevent sending a TCP ACK when we we change TCP window size. |
| 1.3.6.1.4.1.33.10.2.11 | ScalartcpRetransmitMin | read-write | mandatory | Number of milliseconds for the initial TCP Retransmit timer. This is the time at which a TCP session will initially retransmit unacknowledged packets. |
| 1.3.6.1.4.1.33.10.3 | NodexSnmpAgent | |||
| 1.3.6.1.4.1.33.10.3.1 | ScalarsnmpAgentGetCommunity | read-write | mandatory | The SNMP community name allowed to perform get-requests or get-next requests to this agent. Use of this value is case-insensitive. If the size is 0, the agent … |
| 1.3.6.1.4.1.33.10.3.2 | ScalarsnmpAgentSetCommunity | read-write | mandatory | The SNMP community name allowed to perform set-requests to this agent. Use of this value is case-insensitive. If the size is 0, the agent does not check the co… |
| 1.3.6.1.4.1.33.10.3.3 | ScalarsnmpAgentTrapCommunity | read-write | mandatory | The SNMP community name sent in traps from this agent. Use of this value preserves case. Corresponds directly to SERVER INTERNET SNMP TRAP COMMUNITY and the va… |
| 1.3.6.1.4.1.33.10.3.4 | ScalarsnmpAgentGetClientNumber | read-only | mandatory | The number of client source addresses allowed to perform get-requests or get-next requests to this agent. If the value is 0, the agent does not check source ad… |
| 1.3.6.1.4.1.33.10.3.5 | ScalarsnmpAgentSetClientNumber | read-only | mandatory | The number of client source addresses allowed to perform set-requests to this agent. If the value is 0, the agent does not check source address for these opera… |
| 1.3.6.1.4.1.33.10.3.6 | ScalarsnmpAgentTrapClientNumber | read-only | mandatory | The number of client source addresses to which this agent sends traps. If the value is 0, the agent does not perform this operation. Corresponds indirectly to … |
| 1.3.6.1.4.1.33.10.3.7 | TablegetClientTable | not-accessible | mandatory | A list of get client entries. The number of entries is given by the value of snmpAgentGetClientNumber. |
| 1.3.6.1.4.1.33.10.3.7.1 | RowgetClientEntry | not-accessible | mandatory | Parameter values for a get client. |
| 1.3.6.1.4.1.33.10.3.7.1.1 | ColumngetClientIndex | read-only | mandatory | Identification of a get client entry. Corresponds directly to the number in the label 'Get Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.10.3.7.1.2 | ColumngetClientEntryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.3.7.1.3 | ColumngetClientAddressType | read-write | mandatory | The type of network address contained in getClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an I… |
| 1.3.6.1.4.1.33.10.3.7.1.4 | ColumngetClientAddress | read-write | mandatory | The client's network address. If getClientAddressType does not accompany getClientAddress in a set request, the default type is 'ip'. Corresponds directly to t… |
| 1.3.6.1.4.1.33.10.3.8 | TablesetClientTable | not-accessible | mandatory | A list of set client entries. The number of entries is given by the value of snmpAgentSetClientNumber. |
| 1.3.6.1.4.1.33.10.3.8.1 | RowsetClientEntry | not-accessible | mandatory | Parameter values for a set client. |
| 1.3.6.1.4.1.33.10.3.8.1.1 | ColumnsetClientIndex | read-only | mandatory | Identification of a set client entry. Corresponds directly to the number in the label 'Set Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.10.3.8.1.2 | ColumnsetClientEntryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.3.8.1.3 | ColumnsetClientAddressType | read-write | mandatory | The type of network address contained in setClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an I… |
| 1.3.6.1.4.1.33.10.3.8.1.4 | ColumnsetClientAddress | read-write | mandatory | The client's network address. When setting this value, the requester must supply setClientAddressType. If setClientAddressType does not accompany setClientAddr… |
| 1.3.6.1.4.1.33.10.3.9 | TabletrapClientTable | not-accessible | mandatory | A list of trap client entries. The number of entries is given by the value of snmpAgentTrapClientNumber. |
| 1.3.6.1.4.1.33.10.3.9.1 | RowtrapClientEntry | not-accessible | mandatory | Parameter values for a trap client. |
| 1.3.6.1.4.1.33.10.3.9.1.1 | ColumntrapClientIndex | read-only | mandatory | Identification of a trap client entry. Corresponds directly to the number in the label 'Trap Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.10.3.9.1.2 | ColumntrapClientEntryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.3.9.1.3 | ColumntrapClientAddressType | read-write | mandatory | The type of network address contained in trapClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an … |
| 1.3.6.1.4.1.33.10.3.9.1.4 | ColumntrapClientAddress | read-write | mandatory | The client's network address. When setting this value, the requester must supply trapClientAddressType. If trapClientAddressType does not accompany trapClientA… |
| 1.3.6.1.4.1.33.10.3.10 | ScalarsnmpAgentAuthFailureAddress | read-only | mandatory | The address of the client to most recently fail SNMP authorization. |
| 1.3.6.1.4.1.33.10.3.14 | ScalarsnmpAgentCommunityAuthenticationAlways | read-write | mandatory | When enabled, indicates that community string authentication is done always for Gets, Sets, and GetNexts. When disabled, community string authentication is don… |
| 1.3.6.1.4.1.33.10.4 | NodexDomainResolver | |||
| 1.3.6.1.4.1.33.10.4.1 | ScalardomainResolverSuffix | read-write | mandatory | A partial domain name for the server to append to the end of an incomplete domain name provided by the user. Corresponds directly to SERVER INTERNET DEFAULT DO… |
| 1.3.6.1.4.1.33.10.4.2 | ScalardomainResolverAddress1 | read-write | mandatory | The internet address of a Domain Name Server. The system can use one or two such addresses, without preference. A value of 0.0.0.0 indicates no address. Corres… |
| 1.3.6.1.4.1.33.10.4.3 | ScalardomainResolverAddress2 | read-write | mandatory | The internet address of a Domain Name Server. The system can use one or two such addresses, without preference. A value of 0.0.0.0 indicates no address. Corres… |
| 1.3.6.1.4.1.33.10.4.4 | ScalardomainResolverTtl | read-write | mandatory | The number of hours to keep received Domain information. Corresponds directly to SERVER INTERNET DOMAIN TTL and the value labeled ' Domain TTL:' in the SERVER … |
| 1.3.6.1.4.1.33.10.4.5 | ScalardomainResolverNameNumber | read-only | mandatory | The number of Domain name mappings in this system's name cache. |
| 1.3.6.1.4.1.33.10.4.6 | TablenameTable | not-accessible | mandatory | A list of Domain name entries. The number of entries is given by the value of domainResolverNameNumber. |
| 1.3.6.1.4.1.33.10.4.6.1 | RownameEntry | not-accessible | mandatory | Parameter values for a Domain name. |
| 1.3.6.1.4.1.33.10.4.6.1.1 | ColumnnameName | read-only | mandatory | A fully qualified domain name. Corresponds directly to the value labeled 'Domain Name' in the DOMAIN display. |
| 1.3.6.1.4.1.33.10.4.6.1.2 | ColumnnameAddress | read-only | mandatory | An Internet address corresponding to the Domain name. Corresponds directly to the value labeled 'Internet Address' in the DOMAIN display. |
| 1.3.6.1.4.1.33.10.4.6.1.3 | ColumnnameStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the PURGE DOMAIN command. Actual removal of the entry is implement… |
| 1.3.6.1.4.1.33.10.4.6.1.4 | ColumnnameSource | read-only | mandatory | Source of this entry. The value meanings are: local defined by manager (LOCAL) primary obtained from a primary name server secondary obtained from a secondary … |
| 1.3.6.1.4.1.33.10.4.6.1.5 | ColumnnameTtl | read-only | mandatory | The number of minutes remaining in the entry's time to live. Corresponds directly to the value labeled 'TTL' in the DOMAIN display. |
| 1.3.6.1.4.1.33.10.4.7 | NodedomainResolverPpp | |||
| 1.3.6.1.4.1.33.10.4.7.1 | ScalardomainResolverPppPrimaryServer | read-write | mandatory | The internet address of the primary Domain Name Server to use in PPP IPCP negotiations. A value of 0.0.0.0 indicates no address. Corresponds directly to the va… |
| 1.3.6.1.4.1.33.10.4.7.2 | ScalardomainResolverPppSecondaryServer | read-write | mandatory | The internet address of the secondary Domain Name Server to use in PPP IPCP negotiations. A value of 0.0.0.0 indicates no address. Corresponds directly to the … |
| 1.3.6.1.4.1.33.10.5 | NodexSlip | |||
| 1.3.6.1.4.1.33.10.5.1 | TableslipTable | not-accessible | mandatory | A list of SLIP character port entries. |
| 1.3.6.1.4.1.33.10.5.1.1 | RowslipEntry | not-accessible | mandatory | Parameter values for a SLIP port. |
| 1.3.6.1.4.1.33.10.5.1.1.1 | ColumnslipIndex | read-only | mandatory | An index value that uniquely identifies a port that can run SLIP. The port identified by a particular value of this index is the same port as identified by cha… |
| 1.3.6.1.4.1.33.10.5.1.1.2 | ColumnslipState | read-write | mandatory | A control indicating whether SLIP is in operation on the port. Corresponds directly to PORT INTERNET SLIP and the value labeled 'SLIP' in the PORT CHARACTERIST… |
| 1.3.6.1.4.1.33.10.5.1.1.3 | ColumnslipLocalAddress | read-write | mandatory | The IP address assigned to the port. Corresponds directly to PORT SLIP ADDRESS and the value labeled 'SLIP Address:' in the PORT ALTERNATE CHARACTERISTICS disp… |
| 1.3.6.1.4.1.33.10.5.1.1.4 | ColumnslipRemoteAddress | read-write | mandatory | The IP address of the remote system attached to the port. Corresponds directly to PORT SLIP REMOTE and the value labeled 'Remote SLIP Address:' in the PORT ALT… |
| 1.3.6.1.4.1.33.10.5.1.1.5 | ColumnslipMask | read-write | mandatory | The subnet mask to use for SLIP operation on the port. Corresponds directly to PORT SLIP MASK and the value labeled 'SLIP Mask:' in the PORT ALTERNATE CHARACTE… |
| 1.3.6.1.4.1.33.10.5.1.1.6 | ColumnslipPortPacketsReceived | read-only | mandatory | The number of SLIP packets received from the port. Corresponds directly to the value labeled 'Serial Packets Received:' in the PORT COUNTERS display. |
| 1.3.6.1.4.1.33.10.5.1.1.7 | ColumnslipPortPacketsSent | read-only | mandatory | The number of SLIP packets sent to the port. Corresponds directly to the value labeled 'Serial Packets Sent:' in the PORT COUNTERS display. |
| 1.3.6.1.4.1.33.10.5.1.1.8 | ColumnslipPortPacketsDiscarded | read-only | mandatory | The number of SLIP packets received from the port and discarded. Corresponds directly to the value labeled 'Serial Packets Discarded:' in the PORT COUNTERS dis… |
| 1.3.6.1.4.1.33.10.5.1.1.9 | ColumnslipPortPacketLengthErrors | read-only | mandatory | The number of SLIP packets received from the port with an incorrect number of bytes. Corresponds directly to the value labeled 'Serial Packet Length Errors:' i… |
| 1.3.6.1.4.1.33.10.5.1.1.10 | ColumnslipPortPacketChecksumErrors | read-only | mandatory | The number of SLIP packets received from the port with an invalid checksum. Corresponds directly to the value labeled 'Serial Packet Checksum Errors:' in the P… |
| 1.3.6.1.4.1.33.10.5.1.1.11 | ColumnslipNetworkPacketsReceived | read-only | mandatory | The number of SLIP packets received from the network for this port. Corresponds directly to the value labeled 'Network Packets Received:' in the PORT COUNTERS … |
| 1.3.6.1.4.1.33.10.5.1.1.12 | ColumnslipNetworkPacketsSent | read-only | mandatory | The number of SLIP packets sent to the network from this port. Corresponds directly to the value labeled 'Network Packets Sent:' in the PORT COUNTERS display. |
| 1.3.6.1.4.1.33.10.5.1.1.13 | ColumnslipNetworkPacketsDiscarded | read-only | mandatory | The number of SLIP packets received from the network for this port and discarded. Corresponds directly to the value labeled 'Network Packets Discarded:' in the… |
| 1.3.6.1.4.1.33.10.6 | NodexTelnet | |||
| 1.3.6.1.4.1.33.10.6.1 | TabletelnetPortTable | not-accessible | mandatory | A list of Telnet character port entries. |
| 1.3.6.1.4.1.33.10.6.1.1 | RowtelnetPortEntry | not-accessible | mandatory | Telnet parameter values for a character port. |
| 1.3.6.1.4.1.33.10.6.1.1.1 | ColumntelnetPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.6.1.1.2 | ColumntelnetPortIncomingTcpPort | read-write | mandatory | The TCP port number offered for incoming connections to this character port. Corresponds directly to PORT TELNET REMOTE PORT and the value labeled 'Remote Port… |
| 1.3.6.1.4.1.33.10.6.1.1.3 | ColumntelnetPortOutgoingTcpPort | read-write | mandatory | The TCP port number used by default for outgoing connections from this character port. Corresponds directly to PORT TELNET DEFAULT PORT and the value labeled '… |
| 1.3.6.1.4.1.33.10.6.1.1.4 | ColumntelnetPortNewlineTranslation | read-write | mandatory | Translation to apply to newline sequences (CR/NULL or CR/LF) received from the network, before sending the newline to the character port. The value indicates t… |
| 1.3.6.1.4.1.33.10.6.1.1.5 | ColumntelnetPortTerminalType | read-write | mandatory | The terminal type character string for Telnet negotiations. Corresponds directly to PORT TELNET TERMINALTYPE and the value labeled 'TerminalType:' in the PORT … |
| 1.3.6.1.4.1.33.10.6.1.1.6 | ColumntelnetPortEorReflection | read-write | mandatory | Control for end-of-record handshake. Corresponds directly to PORT TELNET EOR REFLECTION and the value labeled 'EOR Reflection:' in the PORT TELNET CHARACTERIST… |
| 1.3.6.1.4.1.33.10.6.1.1.7 | ColumntelnetPortBinaryMode | read-write | mandatory | Control for operation of Telnet binary mode. The value meanings are: disabled refuse binary mode negotiation (INTERACTIVE) flowControl pass all but XON and XOF… |
| 1.3.6.1.4.1.33.10.6.1.1.8 | ColumntelnetPortSendLocation | read-write | mandatory | A control indicating whether a Telnet session will initiate negotiation of the Send Location option. Corresponds directly to the PORT TELNET LOCATION and the v… |
| 1.3.6.1.4.1.33.10.6.1.1.9 | ColumntelnetPortClientLocation | read-only | mandatory | The location of the Telnet client port. Corresponds directly to the value labeled 'Telnet Client Location' in the SESSION display. |
| 1.3.6.1.4.1.33.10.6.1.1.10 | ColumntelnetPortPassiveSendLocation | read-write | mandatory | A control indicating whether a Telnet session will passively respond to negotiation of the Send Location option. When disabled and telnetPortSendLocation is di… |
| 1.3.6.1.4.1.33.10.6.2 | TabletelnetSerialPortTable | not-accessible | mandatory | A list of Telnet character port entries. |
| 1.3.6.1.4.1.33.10.6.2.1 | RowtelnetSerialPortEntry | not-accessible | mandatory | Telnet parameter values for a character port. |
| 1.3.6.1.4.1.33.10.6.2.1.1 | ColumntelnetSerialPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.6.2.1.2 | ColumntelnetSerialPortOptionDisplay | read-write | mandatory | Control for display of Telnet option negotiations. Corresponds directly to PORT TELNET OPTION DISPLAY and the value labeled 'Option Display:' in the PORT TELNE… |
| 1.3.6.1.4.1.33.10.6.2.1.3 | ColumntelnetSerialPortCsiEscape | read-write | mandatory | Control for translation of 8-bit escape sequences received from the character port to 7-bit equivalents before transmission to the remote partner. Corresponds … |
| 1.3.6.1.4.1.33.10.6.2.1.4 | ColumntelnetSerialPortEchoMode | read-write | mandatory | Control for who echoes characters that come from the character port. The value meanings are: local terminal server echoes locally remote remote system echoes d… |
| 1.3.6.1.4.1.33.10.6.2.1.5 | ColumntelnetSerialPortNewlineMode | read-write | mandatory | Translation to apply to newline (carriage return) received from the character port, before sending the newline to the remote partner. The correspondence to com… |
| 1.3.6.1.4.1.33.10.6.2.1.6 | ColumntelnetSerialPortTransmitMode | read-write | mandatory | Criterion for deciding to send to the remote partner characters received from the character port. Corresponds directly to PORT TELNET TRANSMIT and the value la… |
| 1.3.6.1.4.1.33.10.6.2.1.7 | ColumntelnetSerialPortTransmitCharacterTimes | read-write | mandatory | Number of character times to wait before transmitting when telnetSerialPortTransmitMode value is 'timed'. Corresponds directly to PORT TELNET TRANSMIT IDLETIME… |
| 1.3.6.1.4.1.33.10.6.2.1.8 | ColumntelnetSerialPortAbortOutputCharacter | read-write | mandatory | Character input from the character port to cause aborting output. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ABORT… |
| 1.3.6.1.4.1.33.10.6.2.1.9 | ColumntelnetSerialPortAttentionCharacter | read-write | mandatory | Character input from the character port to cause an attention notification to the remote partner. The value 0 indicates no character has this effect. Correspon… |
| 1.3.6.1.4.1.33.10.6.2.1.10 | ColumntelnetSerialPortEraseKeyCharacter | read-write | mandatory | Character input from the character port to cause erasure of the previous input character. The value 0 indicates no character has this effect. Corresponds direc… |
| 1.3.6.1.4.1.33.10.6.2.1.11 | ColumntelnetSerialPortEraseLineCharacter | read-write | mandatory | Character input from the character port to cause erasure of the previous line of input. The value 0 indicates no character has this effect. Corresponds directl… |
| 1.3.6.1.4.1.33.10.6.2.1.12 | ColumntelnetSerialPortInterruptCharacter | read-write | mandatory | Character input from the character port to cause sending an interrupt notification to the remote partner. The value 0 indicates no character has this effect. C… |
| 1.3.6.1.4.1.33.10.6.2.1.13 | ColumntelnetSerialPortQueryCharacter | read-write | mandatory | Character input from the character port to cause sending a status query to the remote partner. The value 0 indicates no character has this effect. Corresponds … |
| 1.3.6.1.4.1.33.10.6.2.1.14 | ColumntelnetSerialPortSynchronizeCharacter | read-write | mandatory | Character input from the character port to cause sending a synchronization attempt to the remote partner. The value 0 indicates no character has this effect. C… |
| 1.3.6.1.4.1.33.10.6.2.1.15 | ColumntelnetSerialPortUrgentBreak | read-write | mandatory | Control for encoding breaks as Telnet urgent data. Corresponds directly to PORT TELNET URGENT BREAK and the value labeled 'Urgent Break:' in the PORT TELNET CH… |
| 1.3.6.1.4.1.33.10.6.2.1.16 | ColumntelnetSerialPortRs491 | read-write | mandatory | A control to enable RS491 protocol processing on a port. |
| 1.3.6.1.4.1.33.10.6.2.1.17 | ColumntelnetSerialPortTransmitBufferedTime | read-write | mandatory | Number of milliseconds to wait before transmitting when telnetSerialPortTransmitMode value is 'timed'. Corresponds directly to PORT TELNET TRANSMIT BUFFERED an… |
| 1.3.6.1.4.1.33.10.6.2.1.18 | ColumntelnetSerialPortInterpretInterruptAsBreak | read-write | mandatory | Control to interpret a Telnet Interrupt Character coming from the network as a Telnet Break Character, and to send a break out the serial port. This control is… |
| 1.3.6.1.4.1.33.10.6.2.1.19 | ColumntelnetSerialPortPass8d | read-write | mandatory | Control to pass unaltered the hexadecimal character '8D'. This control is added to ensure that this character will pass through directly in a session with 8-bi… |
| 1.3.6.1.4.1.33.10.6.2.1.20 | ColumntelnetSerialPortComControlClient | read-write | mandatory | Control to begin Telnet comport control option negotiations as a client when a Telnet session is initiated. The comport control option enables a port to do out… |
| 1.3.6.1.4.1.33.10.6.2.1.21 | ColumntelnetSerialPortComControlServer | read-write | mandatory | Control to begin Telnet comport control option negotiations as a server when a Telnet session is initiated. Corresponds to the value labeled 'Server:' in the P… |
| 1.3.6.1.4.1.33.10.6.2.1.22 | ColumntelnetSerialPortComControlServerRaisesDtr | read-write | mandatory | Control for the client to request that the server raises its DTR signal on the port at the begining of the Telnet connection. Corresponds to the value labeled … |
| 1.3.6.1.4.1.33.10.6.2.1.23 | ColumntelnetSerialPortComControlClientTogglesDtr | read-write | mandatory | Control to respond to the server's notification that its DCD has come high (or low) by raising (or lowering) DTR accordingly on the local port. Corresponds to … |
| 1.3.6.1.4.1.33.10.7 | NodexTn3270 | |||
| 1.3.6.1.4.1.33.10.7.1 | Scalartn3270DeviceNumber | read-only | mandatory | The number of entries in the tn3270 Device table. |
| 1.3.6.1.4.1.33.10.7.2 | Scalartn3270LanguageNumber | read-only | mandatory | The number of entries in the tn3270 Language table. |
| 1.3.6.1.4.1.33.10.7.3 | Scalartn3270PortKeymapStatus | read-write | mandatory | Control for individual ports to create their own keymaps. Corresponds directly to SERVER TN3270 PORT KEYMAPS and the value labeled 'Port Keymaps:' in the SERVE… |
| 1.3.6.1.4.1.33.10.7.4 | Tabletn3270DeviceTable | not-accessible | mandatory | A list of tn3270 terminal device entries. |
| 1.3.6.1.4.1.33.10.7.4.1 | Rowtn3270DeviceEntry | not-accessible | mandatory | Tn3270 parameter values for a terminal device entry. |
| 1.3.6.1.4.1.33.10.7.4.1.1 | Columntn3270DeviceName | read-only | mandatory | The name of a generic terminal device. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER TN3270 DEVICE display. |
| 1.3.6.1.4.1.33.10.7.4.1.2 | Columntn3270DeviceStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the PURGE SERVER TN3270 DEVICE command. It is an implemen… |
| 1.3.6.1.4.1.33.10.7.4.1.3 | Columntn3270DeviceType | read-write | mandatory | The terminal type character string for use when tn3270DeviceTn3270Type is insufficient. Corresponds directly to SERVER TN3270 DEVICE TERMINALTYPE and the value… |
| 1.3.6.1.4.1.33.10.7.4.1.4 | Columntn3270Device3278Model | read-write | mandatory | The 3278 model for the device. Corresponds directly to SERVER TN3270 DEVICE 3278Model and the value labeled '3278Model:' in the SERVER TN3270 DEVICE display. |
| 1.3.6.1.4.1.33.10.7.4.1.5 | Columntn3270DeviceKeyNumber | read-only | mandatory | The number of Key table entries for this device. |
| 1.3.6.1.4.1.33.10.7.4.1.6 | Columntn3270DeviceScreenNumber | read-only | mandatory | The number of Screen table entries for this device. |
| 1.3.6.1.4.1.33.10.7.5 | Tabletn3270KeyTable | not-accessible | mandatory | A list of tn3270 key entries by device. |
| 1.3.6.1.4.1.33.10.7.5.1 | Rowtn3270KeyEntry | not-accessible | mandatory | Tn3270 parameter values for a key entry for a device. |
| 1.3.6.1.4.1.33.10.7.5.1.1 | Columntn3270KeyDeviceName | read-only | mandatory | The name of a generic terminal device as in tn3270DeviceName. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER T… |
| 1.3.6.1.4.1.33.10.7.5.1.2 | Columntn3270KeyName | read-only | mandatory | The key name to which this entry applies. Corresponds directly to the key portion of SERVER TN3270 DEVICE KEYMAP and the value labeled '3270-key' in the 'Keyma… |
| 1.3.6.1.4.1.33.10.7.5.1.3 | Columntn3270KeyStatus | read-write | deprecated | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.7.5.1.4 | Columntn3270KeyCharacterSequence | read-write | mandatory | The ASCII character sequence for the key. Corresponds directly to the escape-sequence portion of SERVER TN3270 DEVICE KEYMAP and the value labeled 'KeyCode' in… |
| 1.3.6.1.4.1.33.10.7.5.1.5 | Columntn3270KeyDescription | read-write | mandatory | Descriptive text for the key. Corresponds directly to the description portion of SERVER TN3270 DEVICE KEYMAP and the value labeled 'Description' in the SERVER … |
| 1.3.6.1.4.1.33.10.7.6 | Tabletn3270ScreenTable | not-accessible | mandatory | A list of tn3270 screen action entries by device. |
| 1.3.6.1.4.1.33.10.7.6.1 | Rowtn3270ScreenEntry | not-accessible | mandatory | Tn3270 parameter values for a screen action entry for a device. |
| 1.3.6.1.4.1.33.10.7.6.1.1 | Columntn3270ScreenDeviceName | read-only | mandatory | The name of a generic terminal device as in tn3270DeviceName. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER T… |
| 1.3.6.1.4.1.33.10.7.6.1.2 | Columntn3270ScreenActionName | read-only | mandatory | The screen action to which this entry applies. Corresponds directly to the action portion of SERVER TN3270 DEVICE SCREENMAP and the value labeled 'Terminal Fun… |
| 1.3.6.1.4.1.33.10.7.6.1.3 | Columntn3270ScreenStatus | read-write | deprecated | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.7.6.1.4 | Columntn3270ScreenCharacterSequence | read-write | mandatory | The ASCII character sequence for the screen action. Some actions may have a lesser length limit. Corresponds directly to the escape-sequence portion of SERVER … |
| 1.3.6.1.4.1.33.10.7.7 | Tabletn3270LanguageTable | not-accessible | mandatory | A list of tn3270 language entries. |
| 1.3.6.1.4.1.33.10.7.7.1 | Rowtn3270LanguageEntry | not-accessible | mandatory | Tn3270 parameter values for a language entry. |
| 1.3.6.1.4.1.33.10.7.7.1.1 | Columntn3270LanguageName | read-only | mandatory | The name of language for character translation tables. Corresponds directly to SERVER TN3270 LANGUAGE and the value labeled 'Language Name:' in the SERVER LANG… |
| 1.3.6.1.4.1.33.10.7.7.1.2 | Columntn3270LanguageStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.7.8 | TableeToALanguageTable | not-accessible | mandatory | A list of language EBCDIC to ASCII conversion entries. |
| 1.3.6.1.4.1.33.10.7.8.1 | RoweToALanguageEntry | not-accessible | mandatory | EBCDIC to ASCII parameter values for a language entry. |
| 1.3.6.1.4.1.33.10.7.8.1.1 | ColumneToALanguageName | read-only | mandatory | The name of language from the language table. |
| 1.3.6.1.4.1.33.10.7.8.1.2 | ColumneToAOffset | read-only | mandatory | EBCDIC character offset plus one, that is, the value 1 corresponds to an operational offset of 0. Corresponds directly to the offset portion of SERVER TN3270 L… |
| 1.3.6.1.4.1.33.10.7.8.1.3 | ColumneToAValue | read-write | mandatory | ASCII character value for the EBCDIC offset. Corresponds directly to the value portion of SERVER TN3270 LANGUAGE and the values in the conversion table labeled… |
| 1.3.6.1.4.1.33.10.7.9 | TableaToELanguageTable | not-accessible | mandatory | A list of language ASCII to EBCDIC conversion entries. |
| 1.3.6.1.4.1.33.10.7.9.1 | RowaToELanguageEntry | not-accessible | mandatory | ASCII to EBCDIC parameter values for a language entry. |
| 1.3.6.1.4.1.33.10.7.9.1.1 | ColumnaToELanguageName | read-only | mandatory | The name of language from the language table. |
| 1.3.6.1.4.1.33.10.7.9.1.2 | ColumnaToEOffset | read-only | mandatory | ASCII character offset plus one, that is, the value 1 corresponds to an operational offset of 0. Corresponds directly to the offset portion of SERVER TN3270 LA… |
| 1.3.6.1.4.1.33.10.7.9.1.3 | ColumnaToEValue | read-write | mandatory | EBCDIC character value for the ASCII offset. Corresponds directly to the value portion of SERVER TN3270 LANGUAGE and the values in the conversion table labeled… |
| 1.3.6.1.4.1.33.10.7.10 | Tabletn3270PortTable | not-accessible | mandatory | A list of tn3270 character port entries. |
| 1.3.6.1.4.1.33.10.7.10.1 | Rowtn3270PortEntry | not-accessible | mandatory | Parameter values for a tn3270 port. |
| 1.3.6.1.4.1.33.10.7.10.1.1 | Columntn3270PortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.7.10.1.2 | Columntn3270PortDeviceName | read-write | mandatory | The name of a generic terminal device from the tn3270 device table. Corresponds directly to PORT TELNET TN3270 DEVICE and the value labeled 'Tn3270 Device:' in… |
| 1.3.6.1.4.1.33.10.7.10.1.3 | Columntn3270PortLanguageName | read-write | mandatory | The name of language from the tn3270 language table. Corresponds directly to PORT TELNET TN3270 LANGUAGE and the value labeled 'Tn3270 Language:' in the PORT T… |
| 1.3.6.1.4.1.33.10.7.10.1.4 | Columntn3270PortExtendedAttributes | read-write | mandatory | A control indicating that certain 3270 extended attributes are supported on the port. Corresponds directly to PORT TELNET TN3270 XTDATTRS and the label 'Tn3270… |
| 1.3.6.1.4.1.33.10.7.10.1.5 | Columntn3270PortEorNegotiation | read-write | mandatory | A control for negotiation of the Telnet EOR option when establishing a tn3270 session on the port. Corresponds directly to PORT TELNET TN3270 EOR and the label… |
| 1.3.6.1.4.1.33.10.7.10.1.6 | Columntn3270PortErrorLock | read-write | mandatory | A control for requiring use the RESET key when the host reports an error during a tn3270 session on the port. Corresponds directly to PORT TELNET TN3270 ERRORL… |
| 1.3.6.1.4.1.33.10.7.10.1.7 | Columntn3270PortPrinterPort | read-write | mandatory | The port number of the tn3270 printer. Corresponds directly to PORT TELNET TN3270 PRINTER and the value labeled 'Tn3270 Printer:' in the PORT TELNET display. |
| 1.3.6.1.4.1.33.10.7.10.1.8 | Columntn3270PortOutgoingTcpPort | read-write | mandatory | The TCP port which is used for a TN3270 session when connecting to a remote host from this serial port. Corresponds directly to the value labeled 'Tn3270 Defau… |
| 1.3.6.1.4.1.33.10.7.10.1.9 | Columntn3270PortSpaceInsert | read-write | mandatory | Control to allow insert mode within a space filled field, and write characters over EBCDIC spaces. Corresponds directly to the presence of 'Tn3270 Space_Insert… |
| 1.3.6.1.4.1.33.10.7.10.1.10 | Columntn3270PortTypeAhead | read-write | mandatory | Control to permit typing ahead in a tn3270 session prior to receiving a response from the host for the previous command entered. Corresponds directly to the pr… |
| 1.3.6.1.4.1.33.10.7.10.1.11 | Columntn3270PrefixKeyMap | read-write | mandatory | Control to prepend a prefix function to another function key. When the operator hits the key the prepended function(s) and then the main function for the key a… |
| 1.3.6.1.4.1.33.10.7.10.1.12 | Columntn3270PortScanner | read-write | mandatory | Indicates that this is a tn3270 scanner port. Corresponds directly to the presence of 'Tn3270 SCANNER' under the label 'Enabled Characteristics' in the PORT TE… |
| 1.3.6.1.4.1.33.10.8 | NodexKerberos | |||
| 1.3.6.1.4.1.33.10.8.1 | ScalarkerbStatus | read-write | mandatory | A control indicating the level of Kerberos operation on the system. Corresponds directly to SERVER KERBEROS STATUS and the value labeled 'Kerberos Security:' i… |
| 1.3.6.1.4.1.33.10.8.2 | ScalarkerbRealm | read-write | mandatory | The Kerberos realm with which the kerbServerName1 and kerbServerName2 are associated. Corresponds directly to SERVER KERBEROS REALM and the value labeled 'Kerb… |
| 1.3.6.1.4.1.33.10.8.3 | ScalarkerbQueryLimit | read-write | mandatory | The maximum number of attempts the system can make when trying to verify a Kerberos ID. Corresponds directly to SERVER KERBEROS QUERY LIMIT and the value label… |
| 1.3.6.1.4.1.33.10.8.4 | ScalarkerbMasterName | read-write | mandatory | The Domain name of the Kerberos master host system, which holds the Kerberos database. Corresponds directly to SERVER KERBEROS MASTER and the value labeled 'Ke… |
| 1.3.6.1.4.1.33.10.8.5 | ScalarkerbServerName1 | read-write | mandatory | The Domain name of the first Kerberos server to try when the system verifys a Kerberos ID. Corresponds directly to SERVER KERBEROS PRIMARY SERVER and the value… |
| 1.3.6.1.4.1.33.10.8.6 | ScalarkerbServerName2 | read-write | mandatory | The Domain name of the Kerberos server to try when the system verifys a Kerberos ID and cannot reach the Kerberos primary server. Corresponds directly to SERVE… |
| 1.3.6.1.4.1.33.10.8.7 | ScalarkerbInsecureLogins | read-only | mandatory | The number of user logins on ports for which Kerberos user verification is not enabled. Corresponds directly to the value labeled 'Logins without Kerberos:' in… |
| 1.3.6.1.4.1.33.10.8.8 | ScalarkerbSecureLogins | read-only | mandatory | The number of successful user logins on ports for which Kerberos user verification is enabled. Corresponds directly to the value labeled 'Successful Logins:' i… |
| 1.3.6.1.4.1.33.10.8.9 | ScalarkerbSecureLoginsFailed | read-only | mandatory | The number of verification failures due to incorrect ID or password for attempted user logins on ports for which Kerberos user verification is enabled. Corresp… |
| 1.3.6.1.4.1.33.10.8.10 | ScalarkerbPasswordChangeFailed | read-only | mandatory | The number of user failures to change their Kerberos password due to invalid old password or new password verification. Corresponds directly to the value label… |
| 1.3.6.1.4.1.33.10.8.11 | ScalarkerbError | read-only | mandatory | The error number of the most recent Kerberos-related failure. Corresponds directly to the value labeled 'Last Kerberos Error:' in the SERVER KERBEROS display. … |
| 1.3.6.1.4.1.33.10.8.12 | ScalarkerbErrorTime | read-only | mandatory | The date and time that kerbError was last updated. Corresponds directly to the value labeled 'Occurred:' in the SERVER KERBEROS display. |
| 1.3.6.1.4.1.33.10.8.13 | ScalarkerbMasterAccess | read-only | mandatory | The number of times the system successfully accessed the Kerberos master host. Corresponds directly to the value labeled 'Attempts to access:', 'Master', and '… |
| 1.3.6.1.4.1.33.10.8.14 | ScalarkerbMasterAccessFailed | read-only | mandatory | The number of times the system failed access to the Kerberos master host. Corresponds directly to the value labeled 'Attempts to access:', 'Master', and 'Unsuc… |
| 1.3.6.1.4.1.33.10.8.15 | ScalarkerbServerAccess1 | read-only | mandatory | The number of times the system successfully accessed the Kerberos primary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', a… |
| 1.3.6.1.4.1.33.10.8.16 | ScalarkerbServerAccessFailed1 | read-only | mandatory | The number of times the system failed access to the Kerberos primary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'U… |
| 1.3.6.1.4.1.33.10.8.17 | ScalarkerbServerAccess2 | read-only | mandatory | The number of times the system successfully accessed the Kerberos secondary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2',… |
| 1.3.6.1.4.1.33.10.8.18 | ScalarkerbServerAccessFailed2 | read-only | mandatory | The number of times the system failed access to the Kerberos secondary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and … |
| 1.3.6.1.4.1.33.10.8.19 | TablekerbPortTable | not-accessible | mandatory | A list of Kerberos character port entries. |
| 1.3.6.1.4.1.33.10.8.19.1 | RowkerbPortEntry | not-accessible | mandatory | Parameter values for a Kerberos port. |
| 1.3.6.1.4.1.33.10.8.19.1.1 | ColumnkerbPortIndex | read-only | mandatory | An index value that uniquely identifies a port could relate to Kerberos. The port identified by a particular value of this index is the same port as identified… |
| 1.3.6.1.4.1.33.10.8.19.1.2 | ColumnkerbPortStatus | read-write | mandatory | A control indicating the level of Kerberos operation on the port. Corresponds directly to PORT KERBEROS and the value 'Kerberos' following the label 'Enabled C… |
| 1.3.6.1.4.1.33.10.8.20 | ScalarkerbServerPort | read-write | mandatory | The UDP port number on the Kerberos server where Kerberos messages are sent. |
| 1.3.6.1.4.1.33.10.9 | NodexPortSecurity | |||
| 1.3.6.1.4.1.33.10.9.1 | ScalarpsEntryNumber | read-only | mandatory | The number of security entries in this system's port security table with psEntryStatus of 'valid'. |
| 1.3.6.1.4.1.33.10.9.2 | ScalarpsEntryNumberLimit | read-only | mandatory | The maximum number of security entries in this system's port security table. |
| 1.3.6.1.4.1.33.10.9.3 | ScalarpsEntryInvalidIndex | read-only | mandatory | A value of psEntryIndex for an entry that has psEntryStatus of 'invalid'. A management station may choose this value when adding a new entry. Collisions betwee… |
| 1.3.6.1.4.1.33.10.9.4 | TablepsPortTable | not-accessible | mandatory | A list of port security character port entries. |
| 1.3.6.1.4.1.33.10.9.4.1 | RowpsPortEntry | not-accessible | mandatory | Port security parameter values for a port. |
| 1.3.6.1.4.1.33.10.9.4.1.1 | ColumnpsPortIndex | read-only | mandatory | An index value that uniquely identifies a port for security purposes. The port identified by a particular value of this index is the same port as identified by… |
| 1.3.6.1.4.1.33.10.9.4.1.2 | ColumnpsPortDefaultInboundAccess | read-write | mandatory | The default access to the port for incoming TCP connections. Corresponds directly to PORT INTERNET SECURITY DEFAULT INBOUND and the value labeled 'Inbound Defa… |
| 1.3.6.1.4.1.33.10.9.4.1.3 | ColumnpsPortDefaultOutboundAccess | read-write | mandatory | The default access to the port for outgoing TCP connections. Corresponds directly to PORT INTERNET SECURITY DEFAULT OUTBOUND and the value labeled 'Outbound De… |
| 1.3.6.1.4.1.33.10.9.4.1.4 | ColumnpsClrInternetSecurity | read-write | mandatory | A control for if the internet security entries for this port will be cleared upon port logout. The default is disabled. |
| 1.3.6.1.4.1.33.10.9.5 | TablepsTable | not-accessible | mandatory | A list of port security entries. |
| 1.3.6.1.4.1.33.10.9.5.1 | RowpsEntry | not-accessible | mandatory | Port security parameter values for an entry for a port. |
| 1.3.6.1.4.1.33.10.9.5.1.1 | ColumnpsEntryIndex | read-only | mandatory | A small, numeric distinguisher for port security entries. When adding a new entry, the client should specify an unused value, such as psEntryInvalidIndex. Corr… |
| 1.3.6.1.4.1.33.10.9.5.1.2 | ColumnpsEntryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR INTERNET SECURITY command. It is an implementat… |
| 1.3.6.1.4.1.33.10.9.5.1.3 | ColumnpsEntryAddress | read-write | mandatory | The IP address to which the entry pertains. Corresponds directly to the PORT INTERNET SECURITY internet address and the value labeled 'Internet Address' in the… |
| 1.3.6.1.4.1.33.10.9.5.1.4 | ColumnpsEntryMask | read-write | mandatory | The mask applied to psEntryAddress when making a security check based on this entry. Corresponds directly to PORT INTERNET SECURITY MASK and the value labeled … |
| 1.3.6.1.4.1.33.10.9.5.1.5 | ColumnpsEntryAccess | read-write | mandatory | The access to the port for TCP connections when making a security check based on this entry. Corresponds directly to PORT INTERNET SECURITY ALLOW or DENY and t… |
| 1.3.6.1.4.1.33.10.9.5.1.6 | ColumnpsEntryDirection | read-write | mandatory | The direction of TCP connections to which this entry applies. Corresponds directly to PORT INTERNET SECURITY INBOUND or OUTBOUND and the value labeled 'Directi… |
| 1.3.6.1.4.1.33.10.9.5.1.7 | ColumnpsEntryPortMap | read-write | mandatory | The list of character ports to which this entry applies. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on… |
| 1.3.6.1.4.1.33.10.10 | NodexXremote | |||
| 1.3.6.1.4.1.33.10.10.1 | ScalarxremoteServerName1 | read-write | mandatory | The Domain name of the first XREMOTE font server to try for downloading fonts. Corresponds directly to SERVER XREMOTE PRIMARY SERVER and the value labeled 'Xre… |
| 1.3.6.1.4.1.33.10.10.2 | ScalarxremoteServerName2 | read-write | mandatory | The Domain name of the XREMOTE font server to try for downloading fonts and the primary font server does not respond. Corresponds directly to SERVER XREMOTE SE… |
| 1.3.6.1.4.1.33.10.10.3 | ScalarxremoteServerAccess1 | read-only | mandatory | The number of times the system successfully accessed the XREMOTE primary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1… |
| 1.3.6.1.4.1.33.10.10.4 | ScalarxremoteServerAccessFailed1 | read-only | mandatory | The number of times the system failed access to the XREMOTE primary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', an… |
| 1.3.6.1.4.1.33.10.10.5 | ScalarxremoteServerAccess2 | read-only | mandatory | The number of times the system successfully accessed the XREMOTE secondary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Serve… |
| 1.3.6.1.4.1.33.10.10.6 | ScalarxremoteServerAccessFailed2 | read-only | mandatory | The number of times the system failed access to the XREMOTE secondary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', … |
| 1.3.6.1.4.1.33.10.10.7 | ScalarxremoteSessions | read-only | mandatory | The number of connected XREMOTE sessions. Corresponds directly to the value labeled 'Current Number of Xremote Sessions:' in the SERVER XREMOTE display. |
| 1.3.6.1.4.1.33.10.10.8 | TablexremotePortTable | not-accessible | mandatory | A list of XREMOTE character port entries. |
| 1.3.6.1.4.1.33.10.10.8.1 | RowxremotePortEntry | not-accessible | mandatory | XREMOTE parameter values for a port. |
| 1.3.6.1.4.1.33.10.10.8.1.1 | ColumnxremotePortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.10.8.1.2 | ColumnxremotePortXremote | read-write | mandatory | Control for use of XREMOTE on the port. Corresponds directly to PORT XREMOTE and the presence of the label 'Xremote' following the label 'Enabled Characteristi… |
| 1.3.6.1.4.1.33.10.10.8.1.3 | ColumnxremotePortXdmQuery | read-write | mandatory | The type of query message issued by a port when searching for an X Display Manager (XDM). Corresponds directly to the PORT XDM QUERY and the 'XDM Query:' in th… |
| 1.3.6.1.4.1.33.10.10.8.1.4 | ColumnxremotePortXdmHost | read-write | mandatory | The Domain name or Internet address of the X Display Manager (XDM) for a port. Corresponds directly to the PORT XDM HOST and the 'XDM Host:' in the PORT ALTERN… |
| 1.3.6.1.4.1.33.10.10.9 | ScalarxremoteServerClients | read-only | mandatory | The number of active X clients. Corresponds directly to the value labeled 'Current Number of XClients:' in the SERVER XREMOTE display. |
| 1.3.6.1.4.1.33.10.11 | NodexRotary | |||
| 1.3.6.1.4.1.33.10.11.1 | ScalarrotaryNumber | read-only | mandatory | The number of entries in the Rotary table. |
| 1.3.6.1.4.1.33.10.11.2 | TablerotaryTable | not-accessible | mandatory | A list of rotary entries. |
| 1.3.6.1.4.1.33.10.11.2.1 | RowrotaryEntry | not-accessible | mandatory | Parameter values for a rotary. |
| 1.3.6.1.4.1.33.10.11.2.1.1 | ColumnrotaryAddress | read-only | mandatory | The internet address to be recognized as a rotary. Corresponds directly to the ip-address portion of SERVER INTERNET ROTARY and the value labeled 'Internet Add… |
| 1.3.6.1.4.1.33.10.11.2.1.2 | ColumnrotaryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR SERVER INTERNET ROTARY command. It is an implem… |
| 1.3.6.1.4.1.33.10.11.2.1.3 | ColumnrotaryPortMap | read-write | mandatory | The list of character ports that compose the rotary. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the… |
| 1.3.6.1.4.1.33.10.12 | NodexEgp | |||
| 1.3.6.1.4.1.33.10.12.1 | ScalaregpRouting | read-write | mandatory | Control for EGP routing services. |
| 1.3.6.1.4.1.33.10.12.2 | ScalaregpStatus | read-only | mandatory | Status of the EGP routing services indicating why it is not running. |
| 1.3.6.1.4.1.33.10.12.3 | TableegpNbrTable | not-accessible | mandatory | The EGP neighbor table. |
| 1.3.6.1.4.1.33.10.12.3.1 | RowegpNbrEntry | not-accessible | mandatory | Information about this entity's relationship with a particular EGP neighbor. |
| 1.3.6.1.4.1.33.10.12.3.1.1 | ColumnegpNbrAddr | read-only | mandatory | The IP address of this entry's EGP neighbor. |
| 1.3.6.1.4.1.33.10.12.3.1.2 | ColumnegpNbrIntervalDead | read-write | mandatory | The interval upon entering the cease or idle state before automatically assuming a Start Event has occured. If a neighbor does not respond within 5 minutes, a … |
| 1.3.6.1.4.1.33.10.12.3.1.3 | ColumnegpNbrStatus | read-write | mandatory | The status of the entry for this neighbor. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.10.13 | NodexOspf | |||
| 1.3.6.1.4.1.33.10.13.1 | ScalarospfAutoConfigure | read-write | mandatory | Control whether OSPF will automatically configure itself. |
| 1.3.6.1.4.1.33.10.13.2 | ScalarospfStatus | read-only | mandatory | Status of the OSPF routing services indicating why it is not running. |
| 1.3.6.1.4.1.33.10.13.3 | TableospfIfMtrcTable | not-accessible | mandatory | The TOS metrics for a non-virtual interface identified by the interface index. |
| 1.3.6.1.4.1.33.10.13.3.1 | RowospfIfMtrcEntry | not-accessible | mandatory | A particular TOS metric for a non-virtual interface identified by the interface index. |
| 1.3.6.1.4.1.33.10.13.3.1.1 | ColumnospfIfMtrcIpAddress | read-only | mandatory | Same as ospfIfMetricIpAddress in OSPF MIB, the IP address of this OSPF interface. |
| 1.3.6.1.4.1.33.10.13.3.1.2 | ColumnospfIfMtrcAddressLessIf | read-only | mandatory | Same as ospfIfMetricAddressLessIf in OSPF MIB, for the purpose of easing the instancing of addressed and addressless interfaces. This variable takes the value … |
| 1.3.6.1.4.1.33.10.13.3.1.3 | ColumnospfIfMtrcTos | read-only | mandatory | Same as ospfIfMetricTOS in OSPF MIB, the type of service metric being referenced. |
| 1.3.6.1.4.1.33.10.13.3.1.4 | ColumnospfIfMtrcCostActual | read-only | mandatory | The actual cost of the metric in case it was set to auto. |
| 1.3.6.1.4.1.33.10.13.4 | TableospfXIfTable | not-accessible | mandatory | The TOS metrics for a non-virtual interface identified by the interface index. |
| 1.3.6.1.4.1.33.10.13.4.1 | RowospfXIfEntry | not-accessible | mandatory | Interface parameters for OSPF. |
| 1.3.6.1.4.1.33.10.13.4.1.1 | ColumnospfXIfIpAddress | read-only | mandatory | Same as ospfIfIpAddress in OSPF MIB, the IP address of this OSPF interface. |
| 1.3.6.1.4.1.33.10.13.4.1.2 | ColumnospfXIfAddressLessIf | read-only | mandatory | Same as ospfIfAddressLessIf in OSPF MIB, for the purpose of easing the instancing of addressed and addressless interfaces. This variable takes the value 0 on i… |
| 1.3.6.1.4.1.33.10.13.4.1.3 | ColumnospfXIfTypeActual | read-only | mandatory | The interface type. |
| 1.3.6.1.4.1.33.10.13.4.1.4 | ColumnospfXIfStatus | read-write | mandatory | The status of the interface entry, including the entry in the standard OSPF MIB. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.10.13.5 | TableospfXAreaTable | not-accessible | mandatory | Parameters for an OSPF area. |
| 1.3.6.1.4.1.33.10.13.5.1 | RowospfXAreaEntry | not-accessible | mandatory | An area entry. |
| 1.3.6.1.4.1.33.10.13.5.1.1 | ColumnospfXAreaId | read-only | mandatory | Same as ospfAreaId in OSPF MIB, the ID of the area. |
| 1.3.6.1.4.1.33.10.13.5.1.2 | ColumnospfXAreaStatus | read-write | mandatory | The status of the area entry, including the entry in the standard OSPF MIB. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.10.14 | NodexRouterIp | |||
| 1.3.6.1.4.1.33.10.14.1 | TableipAdExtTable | not-accessible | mandatory | Table of additional fields indexed by local IP address. An entry in this table is created or deleted when an entry in the ipAddrTable is created or deleted. |
| 1.3.6.1.4.1.33.10.14.1.1 | RowipAdExtEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.10.14.1.1.1 | ColumnipAdEntExtAddress | read-only | mandatory | Same as ipAdEntAddr, a local address representing a network connection. |
| 1.3.6.1.4.1.33.10.14.1.1.2 | ColumnipAdEntExtProxyArp | read-write | mandatory | Controls whether proxy ARP is active for this local address. |
| 1.3.6.1.4.1.33.10.14.1.1.3 | ColumnipAdEntExtRip | read-only | deprecated | Controls whether RIP as a router discovery protocol is active for this local address. |
| 1.3.6.1.4.1.33.10.14.2 | TableipRouterIfTable | not-accessible | mandatory | Table of IP router values indexed by interface. |
| 1.3.6.1.4.1.33.10.14.2.1 | RowipRouterIfEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.10.14.2.1.1 | ColumnipRouterIfIndex | read-only | mandatory | The index of the interface; same as IfIndex. |
| 1.3.6.1.4.1.33.10.14.2.1.2 | ColumnipRouterIfProtocolPriority | read-write | mandatory | The priority at which all Internet routed packets will be placed on the WAN output queue. |
| 1.3.6.1.4.1.33.10.14.2.1.3 | ColumnipRouterIfMTU | read-write | mandatory | The size of the largest datagram that IP can transmit on this interface. The default value is actually hardware dependent. |
| 1.3.6.1.4.1.33.10.14.2.1.4 | ColumnipRouterIfRDP | read-write | mandatory | Control for whether the router side of the Router Discovery Protocol is running on this interface. |
| 1.3.6.1.4.1.33.10.14.2.1.5 | ColumnipRouterIfArpPacketsIn | read-only | mandatory | The number of ARP packets received on this interface. |
| 1.3.6.1.4.1.33.10.14.2.1.6 | ColumnipRouterIfArpPacketsOut | read-only | mandatory | The number of ARP packets sent on this interface. |
| 1.3.6.1.4.1.33.10.14.2.1.7 | ColumnipRouterIfPacketsIn | read-only | mandatory | The number of IP packets received on this interface. |
| 1.3.6.1.4.1.33.10.14.2.1.8 | ColumnipRouterIfPacketsOut | read-only | mandatory | The number of IP packets sent on this interface. |
| 1.3.6.1.4.1.33.10.14.2.1.9 | ColumnipRouterIfForwardsIn | read-only | mandatory | The number of IP packets received on this interface that were forwarded. |
| 1.3.6.1.4.1.33.10.14.2.1.10 | ColumnipRouterIfForwardsOut | read-only | mandatory | The number of IP packets sent on this interface that were forwarded. |
| 1.3.6.1.4.1.33.10.14.3 | NodexIpTraffic | |||
| 1.3.6.1.4.1.33.10.14.3.1 | ScalaripTrafficSort | read-write | mandatory | Setting to 'execute' causes the most recent traffic information to be sorted into the ipTrafficTable. The sorting precedence is: decreasing percentage, increas… |
| 1.3.6.1.4.1.33.10.14.3.2 | TableipTrafficTable | not-accessible | mandatory | A list of traffic entries, sorted in the order specified by ipTrafficSort. |
| 1.3.6.1.4.1.33.10.14.3.2.1 | RowipTrafficEntry | not-accessible | mandatory | A traffic entry. |
| 1.3.6.1.4.1.33.10.14.3.2.1.1 | ColumnipTrafficIndex | read-only | mandatory | Identification of this traffic entry. |
| 1.3.6.1.4.1.33.10.14.3.2.1.2 | ColumnipTrafficPercent | read-only | mandatory | The percentage of total traffic that this traffic entry represents, in tenths of a percent. |
| 1.3.6.1.4.1.33.10.14.3.2.1.3 | ColumnipTrafficDstAddr | read-only | mandatory | The destination IP address of the traffic entry. |
| 1.3.6.1.4.1.33.10.14.3.2.1.4 | ColumnipTrafficSrcAddr | read-only | mandatory | The source IP address of the traffic entry. |
| 1.3.6.1.4.1.33.10.14.3.2.1.5 | ColumnipTrafficProtocol | read-only | mandatory | The IP protocol type of the traffic entry. |
| 1.3.6.1.4.1.33.10.14.3.2.1.6 | ColumnipTrafficDstPort | read-only | mandatory | The destination TCP/UDP port of the traffic entry. |
| 1.3.6.1.4.1.33.10.14.3.2.1.7 | ColumnipTrafficSrcPort | read-only | mandatory | The source TCP/UDP port of the traffic entry. |
| 1.3.6.1.4.1.33.10.14.3.2.1.8 | ColumnipTrafficIf | read-only | mandatory | The inbound interface to which the traffic entry applies. This value is the same as IfIndex. |
| 1.3.6.1.4.1.33.10.14.3.3 | ScalaripTrafficMonitoring | read-write | mandatory | Control for whether the router side of the Router Discovery Protocol is running on this interface. |
| 1.3.6.1.4.1.33.10.14.4 | TablexIpNetToMediaTable | not-accessible | mandatory | iTouch extensions to the IP Address Translation Table. |
| 1.3.6.1.4.1.33.10.14.4.1 | RowxIpNetToMediaEntry | not-accessible | mandatory | Entry parameters. |
| 1.3.6.1.4.1.33.10.14.4.1.1 | ColumnxIpNetToMediaCircuit | read-write | mandatory | An additional identifier for the circuit (i.e. Frame Relay DLCI or X.25 VC) which the entry extends. |
| 1.3.6.1.4.1.33.10.14.4.1.2 | ColumnxIpNetToMediaReverseArp | read-write | mandatory | Whether reverse ARP is supported on this entry. |
| 1.3.6.1.4.1.33.10.15 | NodexRouterUdp | |||
| 1.3.6.1.4.1.33.10.15.1 | TableudpBcstServerTable | not-accessible | mandatory | Table of servers to whom UDP broadcast messages will be forwarded. |
| 1.3.6.1.4.1.33.10.15.1.1 | RowudpBcstServerEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.10.15.1.1.1 | ColumnudpBcstServerAddress | read-only | mandatory | Internet address of the server. |
| 1.3.6.1.4.1.33.10.15.1.1.2 | ColumnudpBcstServerStatus | read-write | mandatory | The status of the server. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.10.15.2 | TableudpBcstPortTable | not-accessible | mandatory | Table of incoming UDP destination port numbers for which UDP broadcasts will be forwarded. |
| 1.3.6.1.4.1.33.10.15.2.1 | RowudpBcstPortEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.10.15.2.1.1 | ColumnudpBcstPort | read-only | mandatory | The incoming destination UDP port number. |
| 1.3.6.1.4.1.33.10.15.2.1.2 | ColumnudpBcstPortStatus | read-write | mandatory | The status of broadcast forwarding for the port. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.10.15.3 | ScalarudpBcstRouting | read-write | mandatory | The indication of whether this entity forwards UDP broadcasts. |
| 1.3.6.1.4.1.33.10.16 | NodexRouterPolicy | |||
| 1.3.6.1.4.1.33.10.16.1 | NodexImport | |||
| 1.3.6.1.4.1.33.10.16.1.1 | TableimpEgpRuleTable | not-accessible | mandatory | The EGP import table. |
| 1.3.6.1.4.1.33.10.16.1.1.1 | RowimpEgpRuleEntry | not-accessible | mandatory | An EGP import rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the route learned from the neighbor. The AS can be se… |
| 1.3.6.1.4.1.33.10.16.1.1.1.1 | ColumnimpEgpRuleAs | read-only | mandatory | The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.1.1.1.2 | ColumnimpEgpRuleNetwork | read-only | mandatory | The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.1.1.1.3 | ColumnimpEgpRuleAction | read-write | mandatory | Control whether the route is learned or discarded. |
| 1.3.6.1.4.1.33.10.16.1.1.1.4 | ColumnimpEgpRulePreference | read-write | mandatory | Preference to be stored with the route. The lower preference is preferred. |
| 1.3.6.1.4.1.33.10.16.1.1.1.5 | ColumnimpEgpRuleType | read-write | mandatory | Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2. |
| 1.3.6.1.4.1.33.10.16.1.1.1.6 | ColumnimpEgpRuleMetricAction | read-write | mandatory | How to apply the impEgpRuleMetric field to the metric learned with the route before storing it in the routing table. |
| 1.3.6.1.4.1.33.10.16.1.1.1.7 | ColumnimpEgpRuleMetric | read-write | mandatory | Metric value to be applied to the metric learned learned with the route before storing it in the routing table. |
| 1.3.6.1.4.1.33.10.16.1.1.1.8 | ColumnimpEgpRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.1.2 | TableimpOspfRuleTable | not-accessible | mandatory | The OSPF import table. |
| 1.3.6.1.4.1.33.10.16.1.2.1 | RowimpOspfRuleEntry | not-accessible | mandatory | An OSPF import rule. Each rule is keyed by the IP network of the route and the AS from which it was learned. The Ip network and the AS can both be set to a wil… |
| 1.3.6.1.4.1.33.10.16.1.2.1.1 | ColumnimpOspfRuleNetwork | read-only | mandatory | The IP network of the route. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.1.2.1.2 | ColumnimpOspfRulePreference | read-write | mandatory | Preference to be stored with the route. The lower preference is preferred. |
| 1.3.6.1.4.1.33.10.16.1.2.1.3 | ColumnimpOspfRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.1.3 | TableimpRipRuleTable | not-accessible | mandatory | The RIP import table. |
| 1.3.6.1.4.1.33.10.16.1.3.1 | RowimpRipRuleEntry | not-accessible | mandatory | A RIP import rule. Each rule is keyed by the interface and the IP network of the route learned from the neighbor. The route is either accepted or discarded and… |
| 1.3.6.1.4.1.33.10.16.1.3.1.1 | ColumnimpRipRuleFromIf | read-only | mandatory | The interface index of the interface where the rule applies, same as ifIndex. |
| 1.3.6.1.4.1.33.10.16.1.3.1.2 | ColumnimpRipRuleNetwork | read-only | mandatory | The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.1.3.1.3 | ColumnimpRipRuleAction | read-write | mandatory | Control whether the route is learned or discarded. |
| 1.3.6.1.4.1.33.10.16.1.3.1.4 | ColumnimpRipRulePreference | read-write | mandatory | Preference to be stored with the route. The lower preference are preferred. |
| 1.3.6.1.4.1.33.10.16.1.3.1.5 | ColumnimpRipRuleType | read-write | mandatory | Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2. |
| 1.3.6.1.4.1.33.10.16.1.3.1.6 | ColumnimpRipRuleMetricAction | read-write | mandatory | How to apply the impRipRuleMetric field to the metric learned with the route before storing it in the routing table. |
| 1.3.6.1.4.1.33.10.16.1.3.1.7 | ColumnimpRipRuleMetric | read-write | mandatory | Metric value to be applied to the metric learned learned with the route before storing it in the routing table. |
| 1.3.6.1.4.1.33.10.16.1.3.1.8 | ColumnimpRipRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.1.4 | TableimpIsisRuleTable | not-accessible | mandatory | The Isis import table. |
| 1.3.6.1.4.1.33.10.16.1.4.1 | RowimpIsisRuleEntry | not-accessible | mandatory | An Isis import rule. Each rule is keyed by the IP network of the route learned from the neighbor. The route is either accepted or discarded and its metrics are… |
| 1.3.6.1.4.1.33.10.16.1.4.1.1 | ColumnimpIsisRuleNetwork | read-only | mandatory | The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.1.4.1.2 | ColumnimpIsisRuleAction | read-write | mandatory | Control whether the route is learned or discarded. |
| 1.3.6.1.4.1.33.10.16.1.4.1.3 | ColumnimpIsisRulePreference | read-write | mandatory | Preference to be stored with the route. The lower preference are preferred. |
| 1.3.6.1.4.1.33.10.16.1.4.1.4 | ColumnimpIsisRuleType | read-write | mandatory | Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2. |
| 1.3.6.1.4.1.33.10.16.1.4.1.5 | ColumnimpIsisRuleMetricAction | read-write | mandatory | How to apply the impIsisRuleMetric field to the metric learned with the route before storing it in the routing table. |
| 1.3.6.1.4.1.33.10.16.1.4.1.6 | ColumnimpIsisRuleMetric | read-write | mandatory | Metric value to be applied to the metric learned learned with the route before storing it in the routing table. |
| 1.3.6.1.4.1.33.10.16.1.4.1.7 | ColumnimpIsisRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2 | NodexExport | |||
| 1.3.6.1.4.1.33.10.16.2.1 | TableexpEgpToEgpRuleTable | not-accessible | mandatory | The EGP to EGP export table. |
| 1.3.6.1.4.1.33.10.16.2.1.1 | RowexpEgpToEgpRuleEntry | not-accessible | mandatory | An EGP to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Auton… |
| 1.3.6.1.4.1.33.10.16.2.1.1.1 | ColumnexpEgpToEgpRuleToAs | read-only | mandatory | The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.1.1.2 | ColumnexpEgpToEgpRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.1.1.3 | ColumnexpEgpToEgpRuleFromAs | read-only | mandatory | The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.1.1.4 | ColumnexpEgpToEgpRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.1.1.5 | ColumnexpEgpToEgpRuleMetricAction | read-write | mandatory | How to apply the expEgpToEgpRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.1.1.6 | ColumnexpEgpToEgpRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.1.1.7 | ColumnexpEgpToEgpRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.2 | TableexpOspfToEgpRuleTable | not-accessible | mandatory | The OSPF to EGP export table. |
| 1.3.6.1.4.1.33.10.16.2.2.1 | RowexpOspfToEgpRuleEntry | not-accessible | mandatory | An OSPF to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the OSPF route in the routing table, and the Aut… |
| 1.3.6.1.4.1.33.10.16.2.2.1.1 | ColumnexpOspfToEgpRuleToAs | read-only | mandatory | The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.2.1.2 | ColumnexpOspfToEgpRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.2.1.3 | ColumnexpOspfToEgpRuleFromAs | read-only | mandatory | The Autonomous System of the route in the route table. Local indicates that the route was not an external OSPF route. The value 65535 is a wild card matching a… |
| 1.3.6.1.4.1.33.10.16.2.2.1.4 | ColumnexpOspfToEgpRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.2.1.5 | ColumnexpOspfToEgpRuleMetricAction | read-write | mandatory | How to apply the expOspfToEgpRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.2.1.6 | ColumnexpOspfToEgpRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.2.1.7 | ColumnexpOspfToEgpRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.3 | TableexpStaticToEgpRuleTable | not-accessible | mandatory | The Static to EGP export table. |
| 1.3.6.1.4.1.33.10.16.2.3.1 | RowexpStaticToEgpRuleEntry | not-accessible | mandatory | An Static to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Static route in the routing table. The … |
| 1.3.6.1.4.1.33.10.16.2.3.1.1 | ColumnexpStaticToEgpRuleToAs | read-only | mandatory | The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.3.1.2 | ColumnexpStaticToEgpRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.3.1.3 | ColumnexpStaticToEgpRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.3.1.4 | ColumnexpStaticToEgpRuleMetricAction | read-write | mandatory | How to apply the expStaticToEgpRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.3.1.5 | ColumnexpStaticToEgpRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.3.1.6 | ColumnexpStaticToEgpRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.4 | TableexpEgpToOspfRuleTable | not-accessible | mandatory | The EGP to OSPF export table. |
| 1.3.6.1.4.1.33.10.16.2.4.1 | RowexpEgpToOspfRuleEntry | not-accessible | mandatory | An EGP to OSPF export rule. Each rule is keyed by the IP network of the EGP route in the routing table, and the Autonomous System from which the route was lear… |
| 1.3.6.1.4.1.33.10.16.2.4.1.1 | ColumnexpEgpToOspfRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.4.1.2 | ColumnexpEgpToOspfRuleFromAs | read-only | mandatory | The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.4.1.3 | ColumnexpEgpToOspfRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.4.1.4 | ColumnexpEgpToOspfRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.5 | TableexpRipToEgpRuleTable | not-accessible | mandatory | The Rip to EGP export table. |
| 1.3.6.1.4.1.33.10.16.2.5.1 | RowexpRipToEgpRuleEntry | not-accessible | mandatory | An Rip to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Rip route in the routing table. The neighb… |
| 1.3.6.1.4.1.33.10.16.2.5.1.1 | ColumnexpRipToEgpRuleToAs | read-only | mandatory | The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.5.1.2 | ColumnexpRipToEgpRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.5.1.3 | ColumnexpRipToEgpRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.5.1.4 | ColumnexpRipToEgpRuleMetricAction | read-write | mandatory | How to apply the expRipToEgpRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.5.1.5 | ColumnexpRipToEgpRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.5.1.6 | ColumnexpRipToEgpRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.6 | TableexpRipToOspfRuleTable | not-accessible | mandatory | The RIP to OSPF export table. |
| 1.3.6.1.4.1.33.10.16.2.6.1 | RowexpRipToOspfRuleEntry | not-accessible | mandatory | A RIP to OSPF export rule. Each rule is keyed by the IP network of the RIP route in the routing table. The IP network can be set to a wild card. The route is e… |
| 1.3.6.1.4.1.33.10.16.2.6.1.1 | ColumnexpRipToOspfRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.6.1.2 | ColumnexpRipToOspfRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.6.1.3 | ColumnexpRipToOspfRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.7 | TableexpEgpToRipRuleTable | not-accessible | mandatory | The EGP to RIP export table. |
| 1.3.6.1.4.1.33.10.16.2.7.1 | RowexpEgpToRipRuleEntry | not-accessible | mandatory | An EGP to RIP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Auton… |
| 1.3.6.1.4.1.33.10.16.2.7.1.1 | ColumnexpEgpToRipRuleToIf | read-only | mandatory | The IP address of the RIP interface to which the rule applies. |
| 1.3.6.1.4.1.33.10.16.2.7.1.2 | ColumnexpEgpToRipRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.7.1.3 | ColumnexpEgpToRipRuleFromAs | read-only | mandatory | The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.7.1.4 | ColumnexpEgpToRipRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.7.1.5 | ColumnexpEgpToRipRuleMetricAction | read-write | mandatory | How to apply the expEgpToRipRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.7.1.6 | ColumnexpEgpToRipRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.7.1.7 | ColumnexpEgpToRipRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.8 | TableexpOspfToRipRuleTable | not-accessible | mandatory | The OSPF to RIP export table. |
| 1.3.6.1.4.1.33.10.16.2.8.1 | RowexpOspfToRipRuleEntry | not-accessible | mandatory | An Ospf to RIP export rule. Each rule is keyed by the Autonomous System of the Ospf neighbor, the IP network of the Ospf route in the routing table, and the Au… |
| 1.3.6.1.4.1.33.10.16.2.8.1.1 | ColumnexpOspfToRipRuleToIf | read-only | mandatory | The IP address of the RIP interface to which the rule applies. |
| 1.3.6.1.4.1.33.10.16.2.8.1.2 | ColumnexpOspfToRipRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.8.1.3 | ColumnexpOspfToRipRuleFromAs | read-only | mandatory | The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number, and the value 65534 is for routes within the loca… |
| 1.3.6.1.4.1.33.10.16.2.8.1.4 | ColumnexpOspfToRipRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.8.1.5 | ColumnexpOspfToRipRuleMetricAction | read-write | mandatory | How to apply the expOspfToRipRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.8.1.6 | ColumnexpOspfToRipRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.8.1.7 | ColumnexpOspfToRipRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. The same is… |
| 1.3.6.1.4.1.33.10.16.2.9 | TableexpRipToRipRuleTable | not-accessible | mandatory | The Rip to Rip export table. |
| 1.3.6.1.4.1.33.10.16.2.9.1 | RowexpRipToRipRuleEntry | not-accessible | mandatory | An Rip to Rip export rule. Each rule is keyed by the IP network of the Rip route in the routing table. The neighbor IP network can be set to a wild card. The r… |
| 1.3.6.1.4.1.33.10.16.2.9.1.1 | ColumnexpRipToRipRuleToIf | read-only | mandatory | The IP address of the RIP interface to which the rule applies. |
| 1.3.6.1.4.1.33.10.16.2.9.1.2 | ColumnexpRipToRipRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.9.1.3 | ColumnexpRipToRipRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.9.1.4 | ColumnexpRipToRipRuleMetricAction | read-write | mandatory | How to apply the expRipToRipRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.9.1.5 | ColumnexpRipToRipRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.9.1.6 | ColumnexpRipToRipRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.10 | TableexpStaticToRipRuleTable | not-accessible | mandatory | The Static to Rip export table. |
| 1.3.6.1.4.1.33.10.16.2.10.1 | RowexpStaticToRipRuleEntry | not-accessible | mandatory | An Static to Rip export rule. Each rule is keyed by the IP network of the Static route in the routing table. The neighbor IP network can be set to a wild card.… |
| 1.3.6.1.4.1.33.10.16.2.10.1.1 | ColumnexpStaticToRipRuleToIf | read-only | mandatory | The IP address of the RIP interface to which the rule applies. |
| 1.3.6.1.4.1.33.10.16.2.10.1.2 | ColumnexpStaticToRipRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.10.1.3 | ColumnexpStaticToRipRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.10.1.4 | ColumnexpStaticToRipRuleMetricAction | read-write | mandatory | How to apply the expStaticToRipRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.10.1.5 | ColumnexpStaticToRipRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.10.1.6 | ColumnexpStaticToRipRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.11 | TableexpIsisToEgpRuleTable | not-accessible | mandatory | The Isis to EGP export table. |
| 1.3.6.1.4.1.33.10.16.2.11.1 | RowexpIsisToEgpRuleEntry | not-accessible | mandatory | An Isis to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Isis route in the routing table. The neig… |
| 1.3.6.1.4.1.33.10.16.2.11.1.1 | ColumnexpIsisToEgpRuleToAs | read-only | mandatory | The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.11.1.2 | ColumnexpIsisToEgpRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.11.1.3 | ColumnexpIsisToEgpRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.11.1.4 | ColumnexpIsisToEgpRuleMetricAction | read-write | mandatory | How to apply the expIsisToEgpRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.11.1.5 | ColumnexpIsisToEgpRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.11.1.6 | ColumnexpIsisToEgpRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.12 | TableexpIsisToOspfRuleTable | not-accessible | mandatory | The Isis to Ospf export table. |
| 1.3.6.1.4.1.33.10.16.2.12.1 | RowexpIsisToOspfRuleEntry | not-accessible | mandatory | An Isis to Ospf export rule. Each rule is keyed by the IP network of the Isis route in the routing table. The IP network can be set to a wild card. The route i… |
| 1.3.6.1.4.1.33.10.16.2.12.1.1 | ColumnexpIsisToOspfRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.12.1.2 | ColumnexpIsisToOspfRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.12.1.3 | ColumnexpIsisToOspfRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.13 | TableexpIsisToRipRuleTable | not-accessible | mandatory | The Isis to Rip export table. |
| 1.3.6.1.4.1.33.10.16.2.13.1 | RowexpIsisToRipRuleEntry | not-accessible | mandatory | An Isis to Rip export rule. Each rule is keyed by the IP network of the Isis route in the routing table. The IP network can be set to a wild card. The route is… |
| 1.3.6.1.4.1.33.10.16.2.13.1.1 | ColumnexpIsisToRipRuleToIf | read-only | mandatory | The IP address of the RIP interface to which the rule applies. |
| 1.3.6.1.4.1.33.10.16.2.13.1.2 | ColumnexpIsisToRipRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.13.1.3 | ColumnexpIsisToRipRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.13.1.4 | ColumnexpIsisToRipRuleMetricAction | read-write | mandatory | How to apply the expIsisToRipRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.13.1.5 | ColumnexpIsisToRipRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.13.1.6 | ColumnexpIsisToRipRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.14 | TableexpEgpToIsisRuleTable | not-accessible | mandatory | The EGP to Isis export table. |
| 1.3.6.1.4.1.33.10.16.2.14.1 | RowexpEgpToIsisRuleEntry | not-accessible | mandatory | An EGP to Isis export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Auto… |
| 1.3.6.1.4.1.33.10.16.2.14.1.1 | ColumnexpEgpToIsisRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.14.1.2 | ColumnexpEgpToIsisRuleFromAs | read-only | mandatory | The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.14.1.3 | ColumnexpEgpToIsisRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.14.1.4 | ColumnexpEgpToIsisRuleMetricType | read-write | mandatory | Whether to advertise the metric as Internal or External. |
| 1.3.6.1.4.1.33.10.16.2.14.1.5 | ColumnexpEgpToIsisRuleDefaultMetricAction | read-write | mandatory | How to apply the expEgpToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.14.1.6 | ColumnexpEgpToIsisRuleDefaultMetric | read-write | mandatory | Default metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.14.1.7 | ColumnexpEgpToIsisRuleDelayMetricAction | read-write | mandatory | How to apply the expEgpToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.14.1.8 | ColumnexpEgpToIsisRuleDelayMetric | read-write | mandatory | Delay metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.14.1.9 | ColumnexpEgpToIsisRuleErrorMetricAction | read-write | mandatory | How to apply the expEgpToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.14.1.10 | ColumnexpEgpToIsisRuleErrorMetric | read-write | mandatory | Error metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.14.1.11 | ColumnexpEgpToIsisRuleExpenseMetricAction | read-write | mandatory | How to apply the expEgpToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.14.1.12 | ColumnexpEgpToIsisRuleExpenseMetric | read-write | mandatory | Expense metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.14.1.13 | ColumnexpEgpToIsisRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.15 | TableexpOspfToIsisRuleTable | not-accessible | mandatory | The Ospf to Isis export table. |
| 1.3.6.1.4.1.33.10.16.2.15.1 | RowexpOspfToIsisRuleEntry | not-accessible | mandatory | An Ospf to Isis export rule. Each rule is keyed by the Autonomous System of the Ospf neighbor, the IP network of the Ospf route in the routing table, and the A… |
| 1.3.6.1.4.1.33.10.16.2.15.1.1 | ColumnexpOspfToIsisRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.15.1.2 | ColumnexpOspfToIsisRuleFromAs | read-only | mandatory | The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number, and the value 65534 is for routes within the loca… |
| 1.3.6.1.4.1.33.10.16.2.15.1.3 | ColumnexpOspfToIsisRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.15.1.4 | ColumnexpOspfToIsisRuleMetricType | read-write | mandatory | Whether to advertise the metric as Internal or External. |
| 1.3.6.1.4.1.33.10.16.2.15.1.5 | ColumnexpOspfToIsisRuleDefaultMetricAction | read-write | mandatory | How to apply the expOspfToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.15.1.6 | ColumnexpOspfToIsisRuleDefaultMetric | read-write | mandatory | Default metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.15.1.7 | ColumnexpOspfToIsisRuleDelayMetricAction | read-write | mandatory | How to apply the expOspfToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.15.1.8 | ColumnexpOspfToIsisRuleDelayMetric | read-write | mandatory | Delay metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.15.1.9 | ColumnexpOspfToIsisRuleErrorMetricAction | read-write | mandatory | How to apply the expOspfToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.15.1.10 | ColumnexpOspfToIsisRuleErrorMetric | read-write | mandatory | Error metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.15.1.11 | ColumnexpOspfToIsisRuleExpenseMetricAction | read-write | mandatory | How to apply the expOspfToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.15.1.12 | ColumnexpOspfToIsisRuleExpenseMetric | read-write | mandatory | Expense metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.15.1.13 | ColumnexpOspfToIsisRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. The same is… |
| 1.3.6.1.4.1.33.10.16.2.16 | TableexpRipToIsisRuleTable | not-accessible | mandatory | The Isis to Isis export table. |
| 1.3.6.1.4.1.33.10.16.2.16.1 | RowexpRipToIsisRuleEntry | not-accessible | mandatory | An Isis to Isis export rule. Each rule is keyed by the IP network of the Isis route in the routing table. The neighbor IP network can be set to a wild card. Th… |
| 1.3.6.1.4.1.33.10.16.2.16.1.1 | ColumnexpRipToIsisRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.16.1.2 | ColumnexpRipToIsisRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.16.1.3 | ColumnexpRipToIsisRuleMetricType | read-write | mandatory | Whether to advertise the metric as Internal or External. |
| 1.3.6.1.4.1.33.10.16.2.16.1.4 | ColumnexpRipToIsisRuleDefaultMetricAction | read-write | mandatory | How to apply the expRipToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.16.1.5 | ColumnexpRipToIsisRuleDefaultMetric | read-write | mandatory | Default metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.16.1.6 | ColumnexpRipToIsisRuleDelayMetricAction | read-write | mandatory | How to apply the expRipToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.16.1.7 | ColumnexpRipToIsisRuleDelayMetric | read-write | mandatory | Delay metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.16.1.8 | ColumnexpRipToIsisRuleErrorMetricAction | read-write | mandatory | How to apply the expRipToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.16.1.9 | ColumnexpRipToIsisRuleErrorMetric | read-write | mandatory | Error metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.16.1.10 | ColumnexpRipToIsisRuleExpenseMetricAction | read-write | mandatory | How to apply the expRipToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.16.1.11 | ColumnexpRipToIsisRuleExpenseMetric | read-write | mandatory | Expense metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.16.1.12 | ColumnexpRipToIsisRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.17 | TableexpStaticToIsisRuleTable | not-accessible | mandatory | The Static to Isis export table. |
| 1.3.6.1.4.1.33.10.16.2.17.1 | RowexpStaticToIsisRuleEntry | not-accessible | mandatory | An Static to Isis export rule. Each rule is keyed by the IP network of the Static route in the routing table. The neighbor IP network can be set to a wild card… |
| 1.3.6.1.4.1.33.10.16.2.17.1.1 | ColumnexpStaticToIsisRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.17.1.2 | ColumnexpStaticToIsisRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.17.1.3 | ColumnexpStaticToIsisRuleMetricType | read-write | mandatory | Whether to advertise the metric as Internal or External. |
| 1.3.6.1.4.1.33.10.16.2.17.1.4 | ColumnexpStaticToIsisRuleDefaultMetricAction | read-write | mandatory | How to apply the expStaticToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.17.1.5 | ColumnexpStaticToIsisRuleDefaultMetric | read-write | mandatory | Default metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.17.1.6 | ColumnexpStaticToIsisRuleDelayMetricAction | read-write | mandatory | How to apply the expStaticToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.17.1.7 | ColumnexpStaticToIsisRuleDelayMetric | read-write | mandatory | Delay metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.17.1.8 | ColumnexpStaticToIsisRuleErrorMetricAction | read-write | mandatory | How to apply the expStaticToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.17.1.9 | ColumnexpStaticToIsisRuleErrorMetric | read-write | mandatory | Error metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.17.1.10 | ColumnexpStaticToIsisRuleExpenseMetricAction | read-write | mandatory | How to apply the expStaticToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.17.1.11 | ColumnexpStaticToIsisRuleExpenseMetric | read-write | mandatory | Expense metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.17.1.12 | ColumnexpStaticToIsisRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.3 | NodexFilter | |||
| 1.3.6.1.4.1.33.10.16.3.1 | TableipIfFilterTable | not-accessible | deprecated | Table of filter entries. |
| 1.3.6.1.4.1.33.10.16.3.1.1 | RowipIfFilterEntry | not-accessible | deprecated | A particular entry. |
| 1.3.6.1.4.1.33.10.16.3.1.1.1 | ColumnipIfFilterIndex | read-only | deprecated | The interface index with which this entry is associated. This value is the same as IfIndex. |
| 1.3.6.1.4.1.33.10.16.3.1.1.2 | ColumnipIfFilterDstAddr | read-only | deprecated | The destination IP address to use in the filter match. |
| 1.3.6.1.4.1.33.10.16.3.1.1.3 | ColumnipIfFilterDstMask | read-only | deprecated | The destination IP mask to use in the filter match. |
| 1.3.6.1.4.1.33.10.16.3.1.1.4 | ColumnipIfFilterSrcAddr | read-only | deprecated | The source IP address to use in the filter match. |
| 1.3.6.1.4.1.33.10.16.3.1.1.5 | ColumnipIfFilterSrcMask | read-only | deprecated | The source IP mask to use in the filter match. |
| 1.3.6.1.4.1.33.10.16.3.1.1.6 | ColumnipIfFilterProtocol | read-only | deprecated | The protocol to use in the filter match. The value 256 indicates any protocol. |
| 1.3.6.1.4.1.33.10.16.3.1.1.7 | ColumnipIfFilterDstPort | read-only | deprecated | The destination port to use in the filter match. This field only applies to TCP and UDP protocol packets. The value 65536 indicates any destination port. |
| 1.3.6.1.4.1.33.10.16.3.1.1.8 | ColumnipIfFilterSrcPort | read-only | deprecated | The source port to use in the filter match. This field only applies to TCP and UDP protocol packets. The value 65536 indicates any source port. |
| 1.3.6.1.4.1.33.10.16.3.1.1.9 | ColumnipIfFilterAction | read-write | deprecated | Control whether the packet for which this filter is the best match should be forwarded or discarded. |
| 1.3.6.1.4.1.33.10.16.3.1.1.10 | ColumnipIfFilterStatus | read-write | deprecated | The status of the filter entry. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.10.16.3.2 | ScalaripFilterState | read-write | mandatory | The indication of whether this system does IP filtering. |
| 1.3.6.1.4.1.33.10.16.3.3 | TableipIfFilter2Table | not-accessible | mandatory | Table of filter entries. |
| 1.3.6.1.4.1.33.10.16.3.3.1 | RowipIfFilter2Entry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.10.16.3.3.1.1 | ColumnipIfFilter2Index | read-only | mandatory | The interface index with which this entry is associated. This value is the same as IfIndex. |
| 1.3.6.1.4.1.33.10.16.3.3.1.2 | ColumnipIfFilter2DstAddr | read-only | mandatory | The destination IP address to use in the filter match. |
| 1.3.6.1.4.1.33.10.16.3.3.1.3 | ColumnipIfFilter2DstMask | read-only | mandatory | The destination IP mask to use in the filter match. |
| 1.3.6.1.4.1.33.10.16.3.3.1.4 | ColumnipIfFilter2SrcAddr | read-only | mandatory | The source IP address to use in the filter match. |
| 1.3.6.1.4.1.33.10.16.3.3.1.5 | ColumnipIfFilter2SrcMask | read-only | mandatory | The source IP mask to use in the filter match. |
| 1.3.6.1.4.1.33.10.16.3.3.1.6 | ColumnipIfFilter2Protocol | read-only | mandatory | The protocol to use in the filter match. The value 256 indicates any protocol. |
| 1.3.6.1.4.1.33.10.16.3.3.1.7 | ColumnipIfFilter2DstPortStart | read-only | mandatory | The starting destination port in a range of destination ports to use in the filter match. This field only applies to TCP and UDP protocol packets. |
| 1.3.6.1.4.1.33.10.16.3.3.1.8 | ColumnipIfFilter2SrcPortStart | read-only | mandatory | The starting source port in a range of source ports to use in the filter match. This field only applies to TCP and UDP protocol packets. |
| 1.3.6.1.4.1.33.10.16.3.3.1.9 | ColumnipIfFilter2Action | read-write | mandatory | Control whether the packet for which this filter is the best match should be forwarded or discarded. |
| 1.3.6.1.4.1.33.10.16.3.3.1.10 | ColumnipIfFilter2Status | read-write | mandatory | The status of the filter entry. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.10.16.3.3.1.11 | ColumnipIfFilter2DstPortEnd | read-only | mandatory | The ending destination port in a range of destination ports to use in the filter match. This field only applies to TCP and UDP protocol packets. This filed mus… |
| 1.3.6.1.4.1.33.10.16.3.3.1.12 | ColumnipIfFilter2SrcPortEnd | read-only | mandatory | The starting source port in a range of source ports to use in the filter match. This field only applies to TCP and UDP protocol packets. This filed must also b… |
| 1.3.6.1.4.1.33.10.16.3.3.1.13 | ColumnipIfFilter2TcpSyn | read-only | mandatory | The value of the TCP SYN and ACK bit to ues in the filter match. This field only applies to TCP packets. On indicates that the SYN bit is on and the ACK bit is… |
| 1.3.6.1.4.1.33.10.16.3.3.1.14 | ColumnipIfFilter2ProtocolPriority | read-write | mandatory | Control the priority at which the packet for which this filter is the best match should be placed on the WAN output queue. None indicates that the sending inte… |
| 1.3.6.1.4.1.33.10.18 | NodexRip | |||
| 1.3.6.1.4.1.33.10.18.1 | ScalarripState | read-write | mandatory | The indication of whether this system participates in RIP. |
| 1.3.6.1.4.1.33.10.18.2 | ScalarripStatus | read-only | mandatory | The status of the RIP software. |
| 1.3.6.1.4.1.33.10.18.3 | TableripNetTable | not-accessible | mandatory | Table of RIP entries. |
| 1.3.6.1.4.1.33.10.18.3.1 | RowripNetEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.10.18.3.1.1 | ColumnripNetNet | read-only | mandatory | The IP Network to which this entry applies. |
| 1.3.6.1.4.1.33.10.18.3.1.2 | ColumnripNetState | read-write | mandatory | This value controls the RIP protocol on this network. |
| 1.3.6.1.4.1.33.10.18.3.1.3 | ColumnripNetRipsIn | read-only | mandatory | The number of RIP packets received from routers on this IP network. |
| 1.3.6.1.4.1.33.10.18.3.1.4 | ColumnripNetRipsOut | read-only | mandatory | The number of RIP packets sent to routers on this IP network. |
| 1.3.6.1.4.1.33.10.18.3.1.5 | ColumnripNetAlgorithm | read-write | mandatory | This value controls the RIP algorithm on this network. |
| 1.3.6.1.4.1.33.10.19 | Nodexlpd | |||
| 1.3.6.1.4.1.33.10.19.1 | TablelpdQueueTable | not-accessible | mandatory | A list of lpd queues on the server. |
| 1.3.6.1.4.1.33.10.19.1.1 | RowlpdQueueEntry | not-accessible | mandatory | Lpd parameter values plus counters for an individual lpd queue. |
| 1.3.6.1.4.1.33.10.19.1.1.1 | ColumnlpdQueueStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR/PURGE SERVER LPD QUEUE command. Setting the val… |
| 1.3.6.1.4.1.33.10.19.1.1.2 | ColumnlpdQueueName | read-only | mandatory | Name of the LPD queue, case sensitive. |
| 1.3.6.1.4.1.33.10.19.1.1.3 | ColumnlpdQueuePorts | read-write | mandatory | List of ports assigned to the queue. An lpd queue can be associated with more than 1 port. This object corresponds to the port-list in the DEF/SET SERVER LPD Q… |
| 1.3.6.1.4.1.33.10.19.1.1.4 | ColumnlpdQueueEnabled | read-write | mandatory | Flag indicates if the queue is enabled. A 'disabled' queue will reject print requests from remote systems. A 'enabled' queue accepts requests for printing. |
| 1.3.6.1.4.1.33.10.19.1.1.5 | ColumnlpdQueueLfConversion | read-write | mandatory | Flag indicates if the queue is converting linefeeds to linefeeds, carriagereturns. 'lfcr' does the converion, 'lf' does not. |
| 1.3.6.1.4.1.33.10.19.1.1.6 | ColumnlpdQueueTotalJobs | read-only | mandatory | The total number of jobs on the queue. This number should be equal to the number of active and waiting jobs. (lpdQueueActive + lpdQueueWaiting) |
| 1.3.6.1.4.1.33.10.19.1.1.7 | ColumnlpdQueueActiveJobs | read-only | mandatory | The number of active jobs on the queue. An active job is a job that has been assigned a port is in the process of receiving data from a remote host and sending… |
| 1.3.6.1.4.1.33.10.19.1.1.8 | ColumnlpdQueueWaitingJobs | read-only | mandatory | The number of waiting jobs on the queue. A waiting job is a job that needs a port to send its data to. This implies that the ports associated with this queue a… |
| 1.3.6.1.4.1.33.10.19.1.1.9 | ColumnlpdQueueProcessedJobs | read-only | mandatory | The total number of jobs processed by this queue since server boot. |
| 1.3.6.1.4.1.33.10.19.1.1.10 | ColumnlpdQueueFormFeed | read-write | mandatory | A control to determine how we will send out a formfeed when printing a lpd job. formfeedafter: Send after job, formfeedbefore: Send before job, formfeednone: S… |
| 1.3.6.1.4.1.33.10.19.1.1.11 | ColumnlpdQueueBypass | read-write | mandatory | Control for a queue to bypass a LPD port which has output inhibited via flow control. Corresponds directly to the value labeled 'Bypass' in the SERVER LPD QUEU… |
| 1.3.6.1.4.1.33.10.19.2 | TablelpdJobTable | not-accessible | mandatory | A list of lpd jobs. |
| 1.3.6.1.4.1.33.10.19.2.1 | RowlpdJobEntry | not-accessible | mandatory | A single lpd Job. |
| 1.3.6.1.4.1.33.10.19.2.1.1 | ColumnlpdJobStatus | read-write | mandatory | Status of this entry. Setting this object to 'invalid' will remove the job from the queue. Setting this object ot 'valid' has no effect since the only way to c… |
| 1.3.6.1.4.1.33.10.19.2.1.2 | ColumnlpdJobNumber | read-only | mandatory | The queue relative job number for this lpd job. Job numbers are assigned as jobs are accepted onto the queue. Job numbers are reset to 1 when they reach a valu… |
| 1.3.6.1.4.1.33.10.19.2.1.3 | ColumnlpdJobAssignedPort | read-only | mandatory | The number of the port assigned to the lpd job. |
| 1.3.6.1.4.1.33.10.19.2.1.4 | ColumnlpdJobFileSize | read-only | mandatory | The size of the file being sent from the remote system. |
| 1.3.6.1.4.1.33.10.19.2.1.5 | ColumnlpdJobHostName | read-only | mandatory | The name of the host sending the job. |
| 1.3.6.1.4.1.33.10.19.2.1.6 | ColumnlpdJobFileName | read-only | mandatory | The name of the file being sent. |
| 1.3.6.1.4.1.33.10.19.2.1.7 | ColumnlpdJobState | read-only | mandatory | The current state of the lpd job. A typical job transistions through the following states: initialize->waiting->assigned->printingdata-> printingcontrol->compl… |
| 1.3.6.1.4.1.33.10.20 | NodexSecurID | |||
| 1.3.6.1.4.1.33.10.20.1 | ScalarsecurIDServerName0 | read-write | mandatory | The Domain name of the first SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER0 and the value la… |
| 1.3.6.1.4.1.33.10.20.2 | ScalarsecurIDServerName1 | read-write | mandatory | The Domain name of the second SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER1 and the value l… |
| 1.3.6.1.4.1.33.10.20.3 | ScalarsecurIDServerName2 | read-write | mandatory | The Domain name of the third SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER2 and the value la… |
| 1.3.6.1.4.1.33.10.20.4 | ScalarsecurIDServerName3 | read-write | mandatory | The Domain name of the fourth SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER3 and the value l… |
| 1.3.6.1.4.1.33.10.20.5 | ScalarsecurIDServerName4 | read-write | mandatory | The Domain name of the fifth SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER4 and the value la… |
| 1.3.6.1.4.1.33.10.20.6 | ScalarsecurIDMaxRetries | read-write | mandatory | The maximum number of times the server will try any single SecurID server to validate a PASSCODE. Corresponds directly to SERVER SECURID ACMMAXRETRIES and the … |
| 1.3.6.1.4.1.33.10.20.7 | ScalarsecurIDBaseTimeout | read-write | mandatory | The initial timeout value to be used between prompts for a SecurID PASSCODE. Corresponds directly to SERVER SECURID ACMBASETIMEOUT and the value labeled 'Secur… |
| 1.3.6.1.4.1.33.10.20.8 | ScalarsecurIDPort | read-write | mandatory | The UDP port number to be used when communicating with the SecurID servers. Corresponds directly to SERVER SECURID ACM_PORT and the value labeled 'SecurID ACM_… |
| 1.3.6.1.4.1.33.10.20.9 | ScalarsecurIDQueryLimit | read-write | mandatory | The maximum number of times a user will be queried for a SecurID PASSCODE before being logged out. Corresponds directly to SERVER SECURID QUERY LIMIT and the v… |
| 1.3.6.1.4.1.33.10.20.10 | ScalarsecurIDEncryptionMode | read-write | mandatory | The type of encryption to use in SecurID validation. Corresponds directly to the value labeled 'Encryption Mode' in the SERVER SECURID display. |
| 1.3.6.1.4.1.33.10.20.11 | ScalarsecurIDInsecureLogins | read-only | mandatory | The number of user logins on ports for which SecurID user verification is not enabled. Corresponds directly to the value labeled 'Logins without SecurID:' in t… |
| 1.3.6.1.4.1.33.10.20.12 | ScalarsecurIDSecureLogins | read-only | mandatory | The number of successful user logins on ports for which SecurID user verification is enabled. Corresponds directly to the value labeled 'Successful Logins:' in… |
| 1.3.6.1.4.1.33.10.20.13 | ScalarsecurIDSecureLoginsFailed | read-only | mandatory | The number of verification failures due to incorrect PASSCODE for attempted user logins on ports for which SecurID user verification is enabled. Corresponds di… |
| 1.3.6.1.4.1.33.10.20.14 | ScalarsecurIDServerAccess0 | read-only | mandatory | The number of times the system successfully accessed the SecurID server0. Corresponds directly to the value labeled 'Attempts to access:', 'Server0', and 'Succ… |
| 1.3.6.1.4.1.33.10.20.15 | ScalarsecurIDServerAccessFailed0 | read-only | mandatory | The number of times the system unsuccessfully accessed the SecurID server0. Corresponds directly to the value labeled 'Attempts to access:', 'Server0', and 'Un… |
| 1.3.6.1.4.1.33.10.20.16 | ScalarsecurIDServerAccess1 | read-only | mandatory | The number of times the system successfully accessed the SecurID server1. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Succ… |
| 1.3.6.1.4.1.33.10.20.17 | ScalarsecurIDServerAccessFailed1 | read-only | mandatory | The number of times the system unsuccessfully accessed the SecurID server1. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Un… |
| 1.3.6.1.4.1.33.10.20.18 | ScalarsecurIDServerAccess2 | read-only | mandatory | The number of times the system successfully accessed the SecurID server2. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Succ… |
| 1.3.6.1.4.1.33.10.20.19 | ScalarsecurIDServerAccessFailed2 | read-only | mandatory | The number of times the system unsuccessfully accessed the SecurID server2. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Un… |
| 1.3.6.1.4.1.33.10.20.20 | ScalarsecurIDServerAccess3 | read-only | mandatory | The number of times the system successfully accessed the SecurID server3. Corresponds directly to the value labeled 'Attempts to access:', 'Server3', and 'Succ… |
| 1.3.6.1.4.1.33.10.20.21 | ScalarsecurIDServerAccessFailed3 | read-only | mandatory | The number of times the system unsuccessfully accessed the SecurID server3. Corresponds directly to the value labeled 'Attempts to access:', 'Server3', and 'Un… |
| 1.3.6.1.4.1.33.10.20.22 | ScalarsecurIDServerAccess4 | read-only | mandatory | The number of times the system successfully accessed the SecurID server4. Corresponds directly to the value labeled 'Attempts to access:', 'Server4', and 'Succ… |
| 1.3.6.1.4.1.33.10.20.23 | ScalarsecurIDServerAccessFailed4 | read-only | mandatory | The number of times the system unsuccessfully accessed the SecurID server4. Corresponds directly to the value labeled 'Attempts to access:', 'Server4', and 'Un… |
| 1.3.6.1.4.1.33.10.20.24 | ScalarsecurIDErrorPortIndex | read-only | mandatory | The index of the most recent port on which a SecurID access violation occurred. Corresponds directly to the value labeled 'Last Unsuccessful Login:' in the SER… |
| 1.3.6.1.4.1.33.10.20.25 | ScalarsecurIDError | read-only | mandatory | The error number of the most recent SecurID-related error. Corresponds directly to the value labeled 'Reason:' in the SERVER SECURID display. See iTouch docume… |
| 1.3.6.1.4.1.33.10.20.26 | ScalarsecurIDErrorUsername | read-only | mandatory | The username associated with the most recent SecurID-related error. Corresponds directly to the value labeled 'Username:' in the SERVER SECURID display. |
| 1.3.6.1.4.1.33.10.20.27 | TablesecurIDPortTable | not-accessible | mandatory | A list of SecurID character port entries. |
| 1.3.6.1.4.1.33.10.20.27.1 | RowsecurIDPortEntry | not-accessible | mandatory | Parameter values for a SecurID port. |
| 1.3.6.1.4.1.33.10.20.27.1.1 | ColumnsecurIDPortIndex | read-only | mandatory | An index value that uniquely identifies a port could relate to SecurID. The port identified by a particular value of this index is the same port as identified … |
| 1.3.6.1.4.1.33.10.20.27.1.2 | ColumnsecurIDPortStatus | read-write | mandatory | A control indicating the level of SecurID operation on the port. Corresponds directly to PORT SECURID and the value 'SecurID' following the label 'Enabled Char… |
| 1.3.6.1.4.1.33.10.23 | NodexSsh | |||
| 1.3.6.1.4.1.33.10.23.1 | TablesshPortTable | not-accessible | mandatory | A list of SSH port entries |
| 1.3.6.1.4.1.33.10.23.1.1 | RowsshPortEntry | not-accessible | mandatory | Parameter values for an SSH port. |
| 1.3.6.1.4.1.33.10.23.1.1.1 | ColumnsshPortIndex | read-only | mandatory | An index value that uniquely identifies an SSH port. The port identified by a particular value of this index is the same port as identified by charPortIndex in… |
| 1.3.6.1.4.1.33.10.23.1.1.2 | ColumnsshPortIncomingTcpPort | read-write | mandatory | Specifies the TCP port number used to identify the port when a SSH connection request arrives at the server. The default for a physical port is 2022 + 100 * po… |
| 1.3.6.1.4.1.33.10.23.1.1.3 | ColumnsshPortNewlineFiltering | read-write | mandatory | Translation to apply to newline sequences (CR/NULL or CR/LF) received from the network during a SSH session, before sending the newline to the character port. … |
| 1.3.6.1.4.1.33.10.23.1.1.4 | ColumnsshPortNewline | read-write | mandatory | Translation to apply to newline (carriage return) received from the character port during an SSH session, before sending the newline to the remote partner. Cor… |
| 1.3.6.1.4.1.33.10.23.1.1.5 | ColumnsshPortTransmitBufferedTime | read-write | mandatory | Number of milliseconds to wait before transmitting data received from a character port during an interactive SSH session. Corresponds directly to the value lab… |
| 1.3.6.1.4.1.33.10.23.1.1.6 | ColumnsshPortRemoteProtocol | read-write | mandatory | Indicates which remote protocols will be accepted at this port. Corresponds indirectly to the presence of 'Telnet' or 'SSH' under the label 'Enabled Characteri… |
| 1.3.6.1.4.1.33.10.23.2 | ScalarsshCipherMask | read-write | mandatory | This is a list of the encryption methods supported. The OCTET STRING contains a bitmap, with one bit for each cipher type. Corresponding bit numbers start with… |
| 1.3.6.1.4.1.33.10.23.3 | ScalarsshAuthenticationTimeout | read-write | mandatory | The timeout in minutes before disconnecting if no successful authentication of SSH parties has been made. Corresponds directly to the value labeled 'Authentica… |
| 1.3.6.1.4.1.33.10.23.4 | ScalarsshHostKeyLength | read-write | mandatory | The bit length of the SSH host encryption key. When modified, the desired change does not occur until the next system initialization. Corresponds directly to t… |
| 1.3.6.1.4.1.33.10.23.5 | ScalarsshHostKeyGenerate | read-write | mandatory | For a set-request with a value of generate or update, a new host key will be generated in the background. When modified with generate, the desired change does … |
| 1.3.6.1.4.1.33.10.23.6 | ScalarsshServerKeyLength | read-write | mandatory | The bit length of the SSH server encryption key. The difference between the server and host key lengths should be greater than 128 bits. Corresponds directly t… |
| 1.3.6.1.4.1.33.10.23.7 | ScalarsshServerKeyTtl | read-write | mandatory | The time in minutes that the server key remains valid. After this time the server key is automatically re-generated. Corresponds directly to the value labeled … |
| 1.3.6.1.4.1.33.10.23.8 | ScalarsshServerMaxBufferSize | read-write | mandatory | The size of the four buffers used by SSH for input and output. These buffers are used for data coming from the console, going to the network, coming from the n… |