ITOUCH-ISIS-MIB
197 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.26 | NodexIsis | |||
| 1.3.6.1.4.1.33.26.1 | NodexIsisSystem | |||
| 1.3.6.1.4.1.33.26.1.1 | TablexIsisSysTable | not-accessible | mandatory | The set of instances of the Integrated IS-IS protocol existing on the system. |
| 1.3.6.1.4.1.33.26.1.1.1 | RowxIsisSysEntry | not-accessible | mandatory | Each row defines information specific to a single instance of the protocol existing on the system. |
| 1.3.6.1.4.1.33.26.1.1.1.1 | ColumnxIsisSysInstance | read-only | mandatory | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.2 | ColumnxIsisSysExistState | read-only | mandatory | The validity of this instance of the Integrated IS-IS protocol. This object follows the existenceState behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.3 | ColumnxIsisSysVersion | read-only | mandatory | The version number of the IS-IS protocol to which this instance conforms. This value must be set by the implementation when the row is valid. |
| 1.3.6.1.4.1.33.26.1.1.1.4 | ColumnxIsisSysType | read-write | mandatory | The type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.5 | ColumnxIsisSysNET | read-only | mandatory | The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the instance's area addresses to form the Network Entity Titles va… |
| 1.3.6.1.4.1.33.26.1.1.1.6 | ColumnxIsisSysMaxPathSplits | read-write | mandatory | Maximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.7 | ColumnxIsisSysMinLSPTransInt | read-write | mandatory | Minimum interval, in seconds, between re-transmission of an LSP. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.8 | ColumnxIsisSysMaxLSPGenInt | read-write | mandatory | Maximum interval, in seconds, between generated LSPs by this instance. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.9 | ColumnxIsisSysMinBroadLSPTransInt | read-write | mandatory | Minimum interval, in milliseconds, between transmission of LSPs on a broadcast circuit. This object follows the resettingTimer behaviour. This timer shall be c… |
| 1.3.6.1.4.1.33.26.1.1.1.10 | ColumnxIsisSysCompSNPInt | read-write | mandatory | Interval, in seconds, between generation of Complete Sequence Numbers PDUs by a designated Intermediate System on a broadcast circuit. This object follows the … |
| 1.3.6.1.4.1.33.26.1.1.1.11 | ColumnxIsisSysOrigL1LSPBuffSize | read-write | mandatory | The maximum size of Level 1 LSPs and SNPs originated by this instance. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.12 | ColumnxIsisSysMaxAreaAddr | read-write | mandatory | The maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have … |
| 1.3.6.1.4.1.33.26.1.1.1.13 | ColumnxIsisSysMinLSPGenInt | read-write | mandatory | Minimum interval, in seconds, between successive generation of LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.14 | ColumnxIsisSysPollESHelloRate | read-write | mandatory | The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration. |
| 1.3.6.1.4.1.33.26.1.1.1.15 | ColumnxIsisSysPartSNPInt | read-write | mandatory | Minimum interval between sending Partial Sequence Number PDUs. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.16 | ColumnxIsisSysWaitTime | read-write | mandatory | Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.17 | ColumnxIsisSysDRISISHelloTimer | read-write | mandatory | The interval, in seconds, between the generation of IIH PDUs by the designated IS on a LAN. This object follows the resettingTimer behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.18 | ColumnxIsisSysOperState | read-write | mandatory | The operational state of this instance of the Integrated IS-IS protocol. Setting this object to the value on when its current value is off enables operation of… |
| 1.3.6.1.4.1.33.26.1.1.1.19 | ColumnxIsisSysL1State | read-only | mandatory | The state of the Level 1 database. |
| 1.3.6.1.4.1.33.26.1.1.1.20 | ColumnxIsisSysCorrLSPs | read-only | mandatory | Number of corrupted LSPs detected. |
| 1.3.6.1.4.1.33.26.1.1.1.21 | ColumnxIsisSysL1LSPDbaseOloads | read-only | mandatory | Number of times the LSP L1 database has become overloaded. |
| 1.3.6.1.4.1.33.26.1.1.1.22 | ColumnxIsisSysManAddrsDropFromArea | read-only | mandatory | Number of times a manual address has been dropped from the area. |
| 1.3.6.1.4.1.33.26.1.1.1.23 | ColumnxIsisSysAttmptsToExMaxSeqNum | read-only | mandatory | Number of times the IS has attempted to exceed the maximum sequence number. |
| 1.3.6.1.4.1.33.26.1.1.1.24 | ColumnxIsisSysSeqNumSkips | read-only | mandatory | Number of times a sequence number skip has occurred. |
| 1.3.6.1.4.1.33.26.1.1.1.25 | ColumnxIsisSysOwnLSPPurges | read-only | mandatory | Number of times a zero-aged copy of the system's own LSP is received from some other node. |
| 1.3.6.1.4.1.33.26.1.1.1.26 | ColumnxIsisSysIDFieldLenMismatches | read-only | mandatory | Number of times a PDU is received with a different value for ID field length to that of the receiving system. |
| 1.3.6.1.4.1.33.26.1.1.1.27 | ColumnxIsisSysMaxAreaMis | read-only | mandatory | Number of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system. |
| 1.3.6.1.4.1.33.26.1.1.1.28 | ColumnxIsisSysOrigL2LSPBuffSize | read-write | mandatory | The maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.33.26.1.1.1.29 | ColumnxIsisSysL2State | read-only | mandatory | The state of the Level 2 database. |
| 1.3.6.1.4.1.33.26.1.1.1.30 | ColumnxIsisSysL2LSPDbaseOloads | read-only | mandatory | Number of times the Level 2 LSP database has become overloaded. |
| 1.3.6.1.4.1.33.26.1.1.1.31 | ColumnxIsisSysMaxAreaCheck | read-write | mandatory | When on, enables checking of maximum area addresses per IS version of ISO10589. |
| 1.3.6.1.4.1.33.26.1.2 | TablexIsisManAreaAddrTable | not-accessible | mandatory | The set of manual area addresses configured on this Intermediate System. |
| 1.3.6.1.4.1.33.26.1.2.1 | RowxIsisManAreaAddrEntry | not-accessible | mandatory | Each entry contains one area address manually configured on this system |
| 1.3.6.1.4.1.33.26.1.2.1.1 | ColumnxIsisManAreaAddrSysInstance | read-only | mandatory | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.33.26.1.2.1.2 | ColumnxIsisManAreaAddr | read-only | mandatory | A manually configured area address for this system. This object follows the index behaviour. |
| 1.3.6.1.4.1.33.26.1.2.1.3 | ColumnxIsisManAreaAddrExistState | read-write | mandatory | The state of the xIsisManAreaAddrEntry. This object follows the ExistenceState behaviour. If an attempt is made to set this object to the value off when the co… |
| 1.3.6.1.4.1.33.26.1.3 | TablexIsisAreaAddrTable | not-accessible | mandatory | The union of the sets of area addresses reported in all Level 1 LSPs received by this instance of the protocol. |
| 1.3.6.1.4.1.33.26.1.3.1 | RowxIsisAreaAddrEntry | not-accessible | mandatory | Each entry contains one area address reported in a Level 1 LSP received by this instance of the protocol. |
| 1.3.6.1.4.1.33.26.1.3.1.1 | ColumnxIsisAreaAddrSysInstance | read-only | mandatory | The unique identifier of the Integrated IS-IS instance to which this row corresponds. |
| 1.3.6.1.4.1.33.26.1.3.1.2 | ColumnxIsisAreaAddr | read-only | mandatory | An area address reported in a Level 1 LSP received by this instance of the protocol. |
| 1.3.6.1.4.1.33.26.1.4 | TablexIsisSysProtSuppTable | not-accessible | mandatory | This table contains the manually configured set of protocols supported by each instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.33.26.1.4.1 | RowxIsisSysProtSuppEntry | not-accessible | mandatory | Each entry contains one protocol supported by an instance of the Integrated ISIS protocol. |
| 1.3.6.1.4.1.33.26.1.4.1.1 | ColumnxIsisSysProtSuppSysInstance | read-only | mandatory | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.33.26.1.4.1.2 | ColumnxIsisSysProtSuppProtocol | read-only | mandatory | One supported protocol. This object follows the index behaviour. |
| 1.3.6.1.4.1.33.26.1.4.1.3 | ColumnxIsisSysProtSuppExistState | read-write | mandatory | The state of the xIsisSysProtSuppEntry. This object follows the ExistenceState and ReplaceOnlyWhileInstanceDisabled behaviours. |
| 1.3.6.1.4.1.33.26.2 | NodexIsisCirc | |||
| 1.3.6.1.4.1.33.26.2.1 | TablexIsisCircTable | not-accessible | mandatory | The table of circuits used by each instance of Integrated IS-IS on this system. |
| 1.3.6.1.4.1.33.26.2.1.1 | RowxIsisCircEntry | not-accessible | mandatory | An xIsisCircEntry exists for each circuit used by Integrated IS-IS on this system. |
| 1.3.6.1.4.1.33.26.2.1.1.1 | ColumnxIsisCircSysInstance | read-only | mandatory | The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. |
| 1.3.6.1.4.1.33.26.2.1.1.2 | ColumnxIsisCircIndex | read-only | mandatory | The identifier of this circuit, unique within the instance of the protocol. This object follows the index behaviour. |
| 1.3.6.1.4.1.33.26.2.1.1.3 | ColumnxIsisCircIfIndex | read-only | mandatory | The value of ifIndex for the interface to which this circuit corresponds. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.33.26.2.1.1.4 | ColumnxIsisCircOperState | read-write | mandatory | The operational state of the circuit. This object follows the operationalState behaviour. |
| 1.3.6.1.4.1.33.26.2.1.1.5 | ColumnxIsisCircExistState | read-only | mandatory | The existence state of this circuit. This object follows the ExistenceState behaviour. |
| 1.3.6.1.4.1.33.26.2.1.1.6 | ColumnxIsisCircType | read-write | mandatory | The type of the circuit. This object follows the replaceOnlyWhileDisabled behaviour. The type specified must be compatible with the type of the interface defin… |
| 1.3.6.1.4.1.33.26.2.1.1.7 | ColumnxIsisCircHelloTimer | read-write | mandatory | The period, in seconds, between IIH PDUs. It is also used as the period between ISH PDUs when polling the ES configuration. This object follows the resettingTi… |
| 1.3.6.1.4.1.33.26.2.1.1.8 | ColumnxIsisCircL1DefaultMetric | read-write | mandatory | The default metric value of this circuit for Level 1 traffic. 0 means the IS will automatically generate Level 1 default metric for the circuit. |
| 1.3.6.1.4.1.33.26.2.1.1.9 | ColumnxIsisCircL1DelayMetric | read-write | mandatory | The delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.33.26.2.1.1.10 | ColumnxIsisCircL1ExpenseMetric | read-write | mandatory | The expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.33.26.2.1.1.11 | ColumnxIsisCircL1ErrorMetric | read-write | mandatory | The error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.33.26.2.1.1.12 | ColumnxIsisCircExtDomain | read-write | mandatory | If true, suppress normal transmission of and interpretation of Intra-domain ISIS PDUs on this circuit. |
| 1.3.6.1.4.1.33.26.2.1.1.13 | ColumnxIsisCircAdjChanges | read-only | mandatory | The number of times an adjacency state change has occurred on this circuit. |
| 1.3.6.1.4.1.33.26.2.1.1.14 | ColumnxIsisCircInitFails | read-only | mandatory | The number of times initialization of this circuit has failed. |
| 1.3.6.1.4.1.33.26.2.1.1.15 | ColumnxIsisCircRejAdjs | read-only | mandatory | The number of times an adjacency has been rejected on this circuit. |
| 1.3.6.1.4.1.33.26.2.1.1.16 | ColumnxIsisCircOutCtrlPDUs | read-only | mandatory | The number of IS-IS control PDUs sent on this circuit. |
| 1.3.6.1.4.1.33.26.2.1.1.17 | ColumnxIsisCircInCtrlPDUs | read-only | mandatory | The number of IS-IS control PDUs received on this circuit. |
| 1.3.6.1.4.1.33.26.2.1.1.18 | ColumnxIsisCircIDFieldLenMismatches | read-only | mandatory | The number of times an IS-IS control PDU with an ID field length different to that for this system has been received. |
| 1.3.6.1.4.1.33.26.2.1.1.20 | ColumnxIsisCircL2DefaultMetric | read-write | mandatory | The default metric value of this circuit for level 2 traffic. 0 means the IS will automatically generate the Level 2 default metric for this circuit. |
| 1.3.6.1.4.1.33.26.2.1.1.21 | ColumnxIsisCircL2DelayMetric | read-write | mandatory | The delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.33.26.2.1.1.22 | ColumnxIsisCircL2ExpenseMetric | read-write | mandatory | The expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.33.26.2.1.1.23 | ColumnxIsisCircL2ErrorMetric | read-write | mandatory | The error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported. |
| 1.3.6.1.4.1.33.26.2.1.1.24 | ColumnxIsisCircManL2Only | read-write | mandatory | When true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour. |
| 1.3.6.1.4.1.33.26.2.1.1.25 | ColumnxIsisCircL1ISPriority | read-write | mandatory | The priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit. |
| 1.3.6.1.4.1.33.26.2.1.1.26 | ColumnxIsisCircL1CircID | read-only | mandatory | The LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it is not participating in the Lev… |
| 1.3.6.1.4.1.33.26.2.1.1.27 | ColumnxIsisCircL1DesIS | read-only | mandatory | The ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the relevant Designated Intermedia… |
| 1.3.6.1.4.1.33.26.2.1.1.28 | ColumnxIsisCircLANL1DesISChanges | read-only | mandatory | The number of times the LAN Level 1 Designated Intermediate System has changed. |
| 1.3.6.1.4.1.33.26.2.1.1.29 | ColumnxIsisCircL2ISPriority | read-write | mandatory | The priority for becoming LAN level 2 Designated Intermediate System. |
| 1.3.6.1.4.1.33.26.2.1.1.30 | ColumnxIsisCircL2CircID | read-only | mandatory | The LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it is not participating in the Le… |
| 1.3.6.1.4.1.33.26.2.1.1.31 | ColumnxIsisCircL2DesIS | read-only | mandatory | The ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the relevant Designated Intermedi… |
| 1.3.6.1.4.1.33.26.2.1.1.32 | ColumnxIsisCircLANL2DesISChanges | read-only | mandatory | The number of times the LAN Level 2 Designated Intermediate System has changed. |
| 1.3.6.1.4.1.33.26.2.2 | TablexIsisCircISTable | not-accessible | mandatory | The set of objects controlling the operation of the IS functions of the ES-IS protocol (ISO 9542) on each circuit over which ISIS is run. |
| 1.3.6.1.4.1.33.26.2.2.1 | RowxIsisCircISEntry | not-accessible | mandatory | Each entry contains objects controlling the operation of the IS functions of the ES-IS protocol (ISO 9542) on one circuit. |
| 1.3.6.1.4.1.33.26.2.2.1.1 | ColumnxIsisCircISSysInstance | read-only | mandatory | The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours. |
| 1.3.6.1.4.1.33.26.2.2.1.2 | ColumnxIsisCircISIndex | read-only | mandatory | The unique identifier of this row. This value is the same as the value of the ifIndex object which identifies the interface which corresponds to this circuit. … |
| 1.3.6.1.4.1.33.26.2.2.1.3 | ColumnxIsisCircISExistState | read-only | mandatory | The existence state of this row. This object follows the ExistenceState behaviour. |
| 1.3.6.1.4.1.33.26.2.2.1.4 | ColumnxIsisCircISOperState | read-write | mandatory | The operational state of the row. This object follows the operationalState behaviour. |
| 1.3.6.1.4.1.33.26.2.2.1.5 | ColumnxIsisCircISHoldTimerMult | read-only | mandatory | The factor to derive holding timer from configuration timer. This value when multipled by a configuration timer yields the value of the holding timer parameter… |
| 1.3.6.1.4.1.33.26.2.2.1.6 | ColumnxIsisCircISConfTimer | read-write | mandatory | Value in seconds for the ISO 9542 IS configuration timer. It is used to determine how often an IS reports configuration information to ESs. This object follows… |
| 1.3.6.1.4.1.33.26.2.2.1.7 | ColumnxIsisCircISSuggESConfTimer | read-write | mandatory | Value to be used for the ISO 9542 suggested ES configuration timer value (in seconds), advertised in IS Hellos generated by the system on this circuit. This ob… |
| 1.3.6.1.4.1.33.26.2.2.1.8 | ColumnxIsisCircISRedHoldTime | read-write | mandatory | The holding time (in seconds) to be specified in Redirect PDUs generated by the system on this circuit. |
| 1.3.6.1.4.1.33.26.2.2.1.9 | ColumnxIsisCircISESReachChgs | read-only | mandatory | Count of the number of changes in reachability of End Systems from this circuit. |
| 1.3.6.1.4.1.33.26.2.2.1.10 | ColumnxIsisCircISInv9542PDUs | read-only | mandatory | Counter of invalid 9542 PDUs received. This is the number of ISO 9452 PDUs received which are discarded as a result of the PDU Header Error Detection or Protoc… |
| 1.3.6.1.4.1.33.26.2.3 | TablexIsisCircClnsTable | not-accessible | mandatory | The set of objects controlling the operation of the CLNS protocol (ISO 8473) on each circuit over which ISIS is run. |
| 1.3.6.1.4.1.33.26.2.3.1 | RowxIsisCircClnsEntry | not-accessible | mandatory | Each entry contains objects controlling the operation of the CLNS protocol (ISO 8473) on one circuit. |
| 1.3.6.1.4.1.33.26.2.3.1.1 | ColumnxIsisCircClnsSysInstance | read-only | mandatory | The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours. |
| 1.3.6.1.4.1.33.26.2.3.1.2 | ColumnxIsisCircClnsIndex | read-only | mandatory | The unique identifier of this row. This value is the same as the value of the ifIndex object which identifies the interface which corresponds to this circuit. … |
| 1.3.6.1.4.1.33.26.2.3.1.3 | ColumnxIsisCircClnsExistState | read-only | mandatory | The existence state of this row. This object follows the ExistenceState behaviour. |
| 1.3.6.1.4.1.33.26.2.3.1.4 | ColumnxIsisCircClnsOperState | read-write | mandatory | The operational state of the row. This object follows the operationalState behaviour. |
| 1.3.6.1.4.1.33.26.2.3.1.5 | ColumnxIsisCircClnsRxPDUs | read-only | mandatory | Counter of number of CLNS PDUs received on this circuit. |
| 1.3.6.1.4.1.33.26.2.3.1.6 | ColumnxIsisCircClnsTxPDUs | read-only | mandatory | Counter of number of CLNS PDUs transmitted on this circuit. |
| 1.3.6.1.4.1.33.26.3 | NodexIsisISAdj | |||
| 1.3.6.1.4.1.33.26.3.1 | TablexIsisISAdjTable | not-accessible | mandatory | The table of adjacencies to Intermediate Systems. |
| 1.3.6.1.4.1.33.26.3.1.1 | RowxIsisISAdjEntry | not-accessible | mandatory | Each entry corresponds to one adjacency to an Intermediate System on this system. |
| 1.3.6.1.4.1.33.26.3.1.1.1 | ColumnxIsisISAdjSysInstance | read-only | mandatory | The unique identifier of the Integrated IS-IS instance to which this row corresponds. |
| 1.3.6.1.4.1.33.26.3.1.1.2 | ColumnxIsisISAdjCircIndex | read-only | mandatory | The identifier of the Circuit which is the parent of the IS adjacency. |
| 1.3.6.1.4.1.33.26.3.1.1.3 | ColumnxIsisISAdjIndex | read-only | mandatory | A unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is assigned by the system when the adjacency is created… |
| 1.3.6.1.4.1.33.26.3.1.1.4 | ColumnxIsisISAdjState | read-only | mandatory | The state of the adjacency |
| 1.3.6.1.4.1.33.26.3.1.1.5 | ColumnxIsisISAdjNeighSNPAAddress | read-only | mandatory | The SNPA address of the neighboring system. |
| 1.3.6.1.4.1.33.26.3.1.1.6 | ColumnxIsisISAdjNeighSysType | read-only | mandatory | The type of the neighboring system. |
| 1.3.6.1.4.1.33.26.3.1.1.7 | ColumnxIsisISAdjNeighSysID | read-only | mandatory | The system ID of the neighboring Intermediate System set from the source ID field of the neighbor's IIH PDUs. |
| 1.3.6.1.4.1.33.26.3.1.1.8 | ColumnxIsisISAdjUsage | read-only | mandatory | The usage of the adjacency. An adjacency of type level1 will be used for level 1 traffic only. An adjacency of type level2 will be used for level 2 traffic onl… |
| 1.3.6.1.4.1.33.26.3.1.1.9 | ColumnxIsisISAdjHoldTimer | read-only | mandatory | The holding time for this adjacency updated from received IIH PDUs. |
| 1.3.6.1.4.1.33.26.3.1.1.10 | ColumnxIsisISAdjNeighPriority | read-only | mandatory | Priority of the neighboring Intermediate System for becoming the LAN Level 1 Designated Intermediate System if the value of xIsisISAdjNeighSysType is L1Interme… |
| 1.3.6.1.4.1.33.26.3.2 | TablexIsisISAdjAreaAddrTable | not-accessible | mandatory | This table contains the set of Area Addresses of neighboring Intermediate Systems as reported in received IIH PDUs. |
| 1.3.6.1.4.1.33.26.3.2.1 | RowxIsisISAdjAreaAddrEntry | not-accessible | mandatory | Each entry contains one Area Address reported by a neighboring Intermediate System in its IIH PDUs. |
| 1.3.6.1.4.1.33.26.3.2.1.1 | ColumnxIsisISAdjAreaAddrSysInstance | read-only | mandatory | The unique identifier of the Integrated IS-IS instance to which this row corresponds. |
| 1.3.6.1.4.1.33.26.3.2.1.2 | ColumnxIsisISAdjAreaAddrCircIndex | read-only | mandatory | The identifier of the Circuit which is the parent of the IS adjacency to which this Area Address entry corresponds. |
| 1.3.6.1.4.1.33.26.3.2.1.3 | ColumnxIsisISAdjAreaAddrAdjIndex | read-only | mandatory | The identifier of the IS adjacency to which this entry belongs. |
| 1.3.6.1.4.1.33.26.3.2.1.4 | ColumnxIsisISAdjAreaAddress | read-only | mandatory | One Area Address as reported in IIH PDUs received from the neighbor. |
| 1.3.6.1.4.1.33.26.3.3 | TablexIsisISAdjIPAddrTable | not-accessible | mandatory | This table contains the set of IP Addresses of neighboring Intermediate Systems as reported in received IIH PDUs. |
| 1.3.6.1.4.1.33.26.3.3.1 | RowxIsisISAdjIPAddrEntry | not-accessible | mandatory | Each entry contains one IP Address reported by a neighboring Intermediate System in its IIH PDUs. |
| 1.3.6.1.4.1.33.26.3.3.1.1 | ColumnxIsisISAdjIPAddrSysInstance | read-only | mandatory | The unique identifier of the Integrated IS-IS instance to which this row corresponds. |
| 1.3.6.1.4.1.33.26.3.3.1.2 | ColumnxIsisISAdjIPAddrCircIndex | read-only | mandatory | The identifier of the Circuit which is the parent of the IS adjacency to which this IP Address entry corresponds. |
| 1.3.6.1.4.1.33.26.3.3.1.3 | ColumnxIsisISAdjIPAddrAdjIndex | read-only | mandatory | The identifier of the IS adjacency to which this entry belongs. |
| 1.3.6.1.4.1.33.26.3.3.1.4 | ColumnxIsisISAdjIPAddress | read-only | mandatory | One IP Address as reported in IIH PDUs received from the neighbor. |
| 1.3.6.1.4.1.33.26.3.4 | TablexIsisISAdjProtSuppTable | not-accessible | mandatory | This table contains the set of protocols supported by neighboring Intermediate Systems as reported in received IIH PDUs. |
| 1.3.6.1.4.1.33.26.3.4.1 | RowxIsisISAdjProtSuppEntry | not-accessible | mandatory | Each entry contains one protocol supported by a neighboring Intermediate System as reported in its IIH PDUs. |
| 1.3.6.1.4.1.33.26.3.4.1.1 | ColumnxIsisISAdjProtSuppSysInstance | read-only | mandatory | The unique identifier of the Integrated IS-IS instance to which this row corresponds. |
| 1.3.6.1.4.1.33.26.3.4.1.2 | ColumnxIsisISAdjProtSuppCircIndex | read-only | mandatory | The identifier of the Circuit which is the parent of the IS adjacency to which this supported protocol entry corresponds. |
| 1.3.6.1.4.1.33.26.3.4.1.3 | ColumnxIsisISAdjProtSuppAdjIndex | read-only | mandatory | The identifier the IS adjacency to which this entry corresponds. |
| 1.3.6.1.4.1.33.26.3.4.1.4 | ColumnxIsisISAdjProtSuppProtocol | read-only | mandatory | One supported protocol as reported in IIH PDUs received from the neighbor. |
| 1.3.6.1.4.1.33.26.4 | NodexIsisESAdj | |||
| 1.3.6.1.4.1.33.26.4.1 | TablexIsisESAdjTable | not-accessible | mandatory | The table of End System IDs of neighboring End Systems as reported in their ESH PDUs or as configured manually |
| 1.3.6.1.4.1.33.26.4.1.1 | RowxIsisESAdjEntry | not-accessible | mandatory | Each entry contains one End System ID of a neighboring End System as reported in an ESH PDU or as configured manually. |
| 1.3.6.1.4.1.33.26.4.1.1.1 | ColumnxIsisESAdjSysInstance | read-only | mandatory | The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours. |
| 1.3.6.1.4.1.33.26.4.1.1.2 | ColumnxIsisESAdjCircIndex | read-only | mandatory | The identifier of the Circuit which is the parent of the ES adjacency to which this End System ID entry corresponds. This object follows the index and manualOr… |
| 1.3.6.1.4.1.33.26.4.1.1.3 | ColumnxIsisESAdjIndex | read-only | mandatory | The identifier of the ES adjacency to which this entry belongs. This object follows the index and manualOrAutomatic behaviours. |
| 1.3.6.1.4.1.33.26.4.1.1.4 | ColumnxIsisESAdjType | read-only | mandatory | The indication of whether this adjacency was created manually by management action or automatically by the implementation. |
| 1.3.6.1.4.1.33.26.4.1.1.5 | ColumnxIsisESAdjState | read-write | mandatory | The state of the adjacency. Adjacencies created manually always have this value set to up. |
| 1.3.6.1.4.1.33.26.4.1.1.6 | ColumnxIsisESAdjNeighSNPAAddress | read-write | mandatory | The SNPA address of the neighboring system. This object follows the manualOrAutomatic behaviour. |
| 1.3.6.1.4.1.33.26.4.1.1.7 | ColumnxIsisESAdjExistState | read-write | mandatory | The existence state of this ES Adjacency. This object follows the ExistenceState behaviour. This object follows the manualOrAutomatic behaviour. |
| 1.3.6.1.4.1.33.26.4.1.1.8 | ColumnxIsisESAdjESID | read-only | mandatory | An End System ID of a neighboring End System. This object follows the index and manualOrAutomatic behaviour. |
| 1.3.6.1.4.1.33.26.5 | NodexIsisReachAddr | |||
| 1.3.6.1.4.1.33.26.5.1 | TablexIsisRATable | not-accessible | mandatory | The table of Reachable Addresses to NSAPs or Address Prefixes. |
| 1.3.6.1.4.1.33.26.5.1.1 | RowxIsisRAEntry | not-accessible | mandatory | Each entry defines a Reachable Address to a NSAP or Address Prefix. |
| 1.3.6.1.4.1.33.26.5.1.1.1 | ColumnxIsisRASysInstance | read-only | mandatory | The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours. |
| 1.3.6.1.4.1.33.26.5.1.1.2 | ColumnxIsisRACircIndex | read-only | mandatory | The identifier of the Circuit over which this destination is reachable. This object follows the index and manualOrAutomatic behaviours. |
| 1.3.6.1.4.1.33.26.5.1.1.3 | ColumnxIsisRAIndex | read-only | mandatory | The identifier for this xIsisRAEntry. This value must be unique amongst all Reachable Addresses on the same parent Circuit. This object follows the index and m… |
| 1.3.6.1.4.1.33.26.5.1.1.4 | ColumnxIsisRAExistState | read-write | mandatory | The existence state of this Reachable Address. This object follows the ExistenceState and manualOrAutomatic behaviours. |
| 1.3.6.1.4.1.33.26.5.1.1.5 | ColumnxIsisRAOperState | read-write | mandatory | The operational state of the Reachable Address. This object follows the operationalState and manualOrAutomatic behaviours. |
| 1.3.6.1.4.1.33.26.5.1.1.6 | ColumnxIsisRAAddrPrefix | read-write | mandatory | The destination of this Reachable Address. This is an Address Prefix. This object follows the replaceOnlyWhileDisabled and manualOrAutomatic behaviours. |
| 1.3.6.1.4.1.33.26.5.1.1.7 | ColumnxIsisRAMapType | read-write | mandatory | The type of mapping to be employed to ascertain the SNPA Address which should be used in forwarding PDUs for this Reachable Address prefix. This object follows… |
| 1.3.6.1.4.1.33.26.5.1.1.8 | ColumnxIsisRADefMetric | read-write | mandatory | The default metric value for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour. |
| 1.3.6.1.4.1.33.26.5.1.1.9 | ColumnxIsisRADelMetric | read-write | mandatory | The delay metric for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour. The value zero is reserved to indica… |
| 1.3.6.1.4.1.33.26.5.1.1.10 | ColumnxIsisRAExpMetric | read-write | mandatory | The expense metric for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour. The value zero is reserved to indi… |
| 1.3.6.1.4.1.33.26.5.1.1.11 | ColumnxIsisRAErrMetric | read-write | mandatory | The error metric for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour. The value zero is reserved to indica… |
| 1.3.6.1.4.1.33.26.5.1.1.12 | ColumnxIsisRADefMetricType | read-write | mandatory | Indicates whether the default metric is internal or external. This object follows the manualOrAutomatic behaviour. |
| 1.3.6.1.4.1.33.26.5.1.1.13 | ColumnxIsisRADelMetricType | read-write | mandatory | Indicates whether the delay metric is internal or external. This object follows the manualOrAutomatic behaviour. |
| 1.3.6.1.4.1.33.26.5.1.1.14 | ColumnxIsisRAExpMetricType | read-write | mandatory | Indicates whether the expense metric is internal or external. This object follows the manualOrAutomatic behaviour. |
| 1.3.6.1.4.1.33.26.5.1.1.15 | ColumnxIsisRAErrMetricType | read-write | mandatory | Indicates whether the error metric is internal or external. This object follows the manualOrAutomatic behaviour. |
| 1.3.6.1.4.1.33.26.5.1.1.16 | ColumnxIsisRASNPAAddress | read-write | mandatory | The SNPA Address to which a PDU may be forwarded in order to reach a destination which matches the address prefix of the Reachable Address. This object follows… |
| 1.3.6.1.4.1.33.26.5.1.1.17 | ColumnxIsisRASNPAMask | read-write | mandatory | A bit mask with 1 bits indicating the positions in the effective destination address from which embedded SNPA information is to be extracted. For the extractio… |
| 1.3.6.1.4.1.33.26.5.1.1.18 | ColumnxIsisRASNPAPrefix | read-write | mandatory | A fixed SNPA prefix for use when the xIsisRAMapType is extractDSP. The SNPA Address to use is formed by concatenating the fixed SNPA prefix with a variable SNP… |
| 1.3.6.1.4.1.33.26.5.1.1.20 | ColumnxIsisRAType | read-only | mandatory | The type of Reachable address. Those of type manual are created by the network manager. Those of type automatic are created through propogation of routing info… |
| 1.3.6.1.4.1.33.26.7 | NodexIsisCLNPDest | |||
| 1.3.6.1.4.1.33.26.7.1 | TablexIsisL1CLNPDestTable | not-accessible | mandatory | The Level 1 CLNP Destination Table records information about each end system ID destination known to the Intermediate System. |
| 1.3.6.1.4.1.33.26.7.1.1 | RowxIsisL1CLNPDestEntry | not-accessible | mandatory | Each entry records information about one CLNP end system ID destination known to the Intermediate System. |
| 1.3.6.1.4.1.33.26.7.1.1.1 | ColumnxIsisL1CLNPSysInstance | read-only | mandatory | If the value of xIsisL1CLNPRouteSource is manual or level1 then this is the identifier of the Integrated IS-IS Level 1 instance from which this reachability in… |
| 1.3.6.1.4.1.33.26.7.1.1.2 | ColumnxIsisL1CLNPRouteDest | read-only | mandatory | The destination end system ID. |
| 1.3.6.1.4.1.33.26.7.1.1.3 | ColumnxIsisL1CLNPRouteMetricQOS | read-only | mandatory | The QOS metric for this destination. |
| 1.3.6.1.4.1.33.26.7.1.1.4 | ColumnxIsisL1CLNPRouteMetricType | read-only | mandatory | Indicates whether the metric has an external component or not |
| 1.3.6.1.4.1.33.26.7.1.1.5 | ColumnxIsisL1CLNPRouteMetricValue | read-only | mandatory | The path metric value for this destination. |
| 1.3.6.1.4.1.33.26.7.1.1.6 | ColumnxIsisL1CLNPRouteForw | read-only | mandatory | The OBJECT IDENTIFIER for the first object in the table entry which corresponds to the entry used for forwarding packets to this destination. This value is an … |
| 1.3.6.1.4.1.33.26.7.1.1.7 | ColumnxIsisL1CLNPRouteSource | read-only | mandatory | The source of the destination. Manual is used if the source is manually configured information on the system. Level1 is used if the source is Level 1 LSPs. Esi… |
| 1.3.6.1.4.1.33.26.7.2 | TablexIsisL2CLNPDestTable | not-accessible | mandatory | The Level 2 CLNP Destination Table records information about each NSAP Address Prefix known to the Intermediate System. |
| 1.3.6.1.4.1.33.26.7.2.1 | RowxIsisL2CLNPDestEntry | not-accessible | mandatory | Each entry records information about one NSAP Address Prefix known to the Intermediate System. |
| 1.3.6.1.4.1.33.26.7.2.1.1 | ColumnxIsisL2CLNPSysInstance | read-only | mandatory | The identifier of the Integrated IS-IS Level 2 instance from which this reachability information was learned. |
| 1.3.6.1.4.1.33.26.7.2.1.2 | ColumnxIsisL2CLNPRouteDest | read-only | mandatory | The destination address prefix. |
| 1.3.6.1.4.1.33.26.7.2.1.3 | ColumnxIsisL2CLNPRouteMetricQOS | read-only | mandatory | The QOS metric for this destination. |
| 1.3.6.1.4.1.33.26.7.2.1.4 | ColumnxIsisL2CLNPRouteMetricType | read-only | mandatory | Indicates whether the metric has an external component or not |
| 1.3.6.1.4.1.33.26.7.2.1.5 | ColumnxIsisL2CLNPRouteMetricValue | read-only | mandatory | The path metric value for this destination. |
| 1.3.6.1.4.1.33.26.7.2.1.6 | ColumnxIsisL2CLNPRouteForw | read-only | mandatory | The OBJECT IDENTIFIER for the first object in the table entry which corresponds to the entry used for forwarding packets to this destination. This value is an … |
| 1.3.6.1.4.1.33.26.7.2.1.7 | ColumnxIsisL2CLNPRouteSource | read-only | mandatory | The source of the destination. Manual is used if the source is manually configured information on the system. Level2 is used if the source is Level 2 LSPs. |
| 1.3.6.1.4.1.33.26.7.3 | TablexIsisL3CLNPDestTable | not-accessible | mandatory | The Level 3 CLNP Destination Table records information about each Reachable Address Prefix known to the Intermediate System. |
| 1.3.6.1.4.1.33.26.7.3.1 | RowxIsisL3CLNPDestEntry | not-accessible | mandatory | Each entry records information about one Address Prefix known to the Intermediate System. |
| 1.3.6.1.4.1.33.26.7.3.1.1 | ColumnxIsisL3CLNPSysInstance | read-only | mandatory | The identifier of the Integrated IS-IS Level 3 instance from which this reachability information was learned. |
| 1.3.6.1.4.1.33.26.7.3.1.2 | ColumnxIsisL3CLNPRouteDest | read-only | mandatory | The destination address prefix. |
| 1.3.6.1.4.1.33.26.7.3.1.3 | ColumnxIsisL3CLNPRouteMetricQOS | read-only | mandatory | The QOS metric for this destination. |
| 1.3.6.1.4.1.33.26.7.3.1.4 | ColumnxIsisL3CLNPRouteMetricType | read-only | mandatory | Indicates whether the metric has an external component or not |
| 1.3.6.1.4.1.33.26.7.3.1.5 | ColumnxIsisL3CLNPRouteMetricValue | read-only | mandatory | The path metric value for this destination. |
| 1.3.6.1.4.1.33.26.7.3.1.6 | ColumnxIsisL3CLNPRouteForw | read-only | mandatory | The OBJECT IDENTIFIER for the first object in the table entry which corresponds to the entry used for forwarding packets to this destination. This value is an … |
| 1.3.6.1.4.1.33.26.7.3.1.7 | ColumnxIsisL3CLNPRouteSource | read-only | mandatory | The source of the destination. Manual is used if the source is manually configured information on the system. Level3 is used if the source is Level 3 LSPs. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ExistState | INTEGER { off(1), on(2) } | ||
| SupportedProtocol | INTEGER { iso8473(129), ip(204) } |