Intel-6000-Switch-MIB
310 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.343.2.11.1 | Nodeintel6000Switch | |||
| 1.3.6.1.4.1.343.2.11.1.1 | Nodeexpress6000 | |||
| 1.3.6.1.4.1.343.2.11.1.2 | NodeswitchMIB | |||
| 1.3.6.1.4.1.343.2.11.1.2.1 | NodecarrierCPSlotChangeEvent | The master CP board has changed from slotA to slotB or vice-versa. | ||
| 1.3.6.1.4.1.343.2.11.1.2.1 | NodeswitchConfigGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.1.1 | ScalaripAddress | read-write | mandatory | IP address for the management port of this entity. |
| 1.3.6.1.4.1.343.2.11.1.2.1.2 | ScalarnetMask | read-write | mandatory | The netmask for the management port of this entity. |
| 1.3.6.1.4.1.343.2.11.1.2.1.3 | ScalardefaultGateway | read-write | mandatory | The IP address of the Default Gateway for this entity. |
| 1.3.6.1.4.1.343.2.11.1.2.1.4 | ScalarbroadcastAddress | read-write | mandatory | The broadcast address for the management port of this entity. |
| 1.3.6.1.4.1.343.2.11.1.2.1.5 | ScalarmaxMacAddresses | read-only | mandatory | Largest aggregate number of MAC addresses which this entity can support simultaneously. |
| 1.3.6.1.4.1.343.2.11.1.2.1.6 | ScalarclearStatistics | read-write | mandatory | Setting this variable to TRUE (1) clears the traffic statistics accumulators on this entity. Setting this variable to any other value has no effect. The variab… |
| 1.3.6.1.4.1.343.2.11.1.2.1.7 | ScalarageFilterDatabase | read-write | mandatory | Setting this variable to FALSE (0) causes this entity to stop aging out entries from its filter database. Setting this variable to TRUE (1) causes this entity … |
| 1.3.6.1.4.1.343.2.11.1.2.1.8 | ScalarentMibVersion | read-only | mandatory | The revision level of the MIB contained in the CP firmware. |
| 1.3.6.1.4.1.343.2.11.1.2.1.9 | ScalartelnetEnable | read-write | mandatory | The current state of the telnet daemon in the Switch. If this field is set to disable, external accesses via telnet will not be permitted. |
| 1.3.6.1.4.1.343.2.11.1.2.1.10 | ScalarsyslogEnable | read-write | mandatory | The current state of remote IP system logging. If enabled, the Switch will log messages to the SyslogIp IP address. If it is disabled, it will log messages to … |
| 1.3.6.1.4.1.343.2.11.1.2.1.11 | ScalarsyslogIp | read-write | mandatory | The Ip address for remote IP system logging. If syslogEnabled is enabled, the Switch log messages to this IP. |
| 1.3.6.1.4.1.343.2.11.1.2.1.12 | ScalarsyslogCmds | read-write | mandatory | If system logging is enabled, this field enables or disables the logging of commands issued on a terminal command line. |
| 1.3.6.1.4.1.343.2.11.1.2.1.13 | ScalarsyslogOut | read-write | mandatory | If system logging is enabled, this field enables or disables the logging of output from the terminal. |
| 1.3.6.1.4.1.343.2.11.1.2.1.14 | ScalarnvramLoadSave | read-write | mandatory | This field triggers loading and saving of the system settings in non-volatile RAM space. To trigger a load or a save the NVRAM IP address must first be set bel… |
| 1.3.6.1.4.1.343.2.11.1.2.1.15 | ScalarnvramLastOpStat | read-only | mandatory | This field shows the outcome of the last NVRAM load or save. If the NVRAM update was sucessful, this field will return one. |
| 1.3.6.1.4.1.343.2.11.1.2.1.16 | ScalarnvramRemoteIp | read-write | mandatory | This is the IP address of the remote tftp machine where the NVRAM is to be loaded or saved. For nvramLoadSave to have an effect, this field must be set to a va… |
| 1.3.6.1.4.1.343.2.11.1.2.1.17 | ScalarnvramRemotePath | read-write | mandatory | This is the path on the remote machine where the NVRAM image is to be retrieved or stored. This path does not include the filename, and does not end with a /. … |
| 1.3.6.1.4.1.343.2.11.1.2.2 | NodecarrierStatusAChangeEvent | The status (inserted/running) of the CP in slot A has changed. | ||
| 1.3.6.1.4.1.343.2.11.1.2.2 | NodemonitorGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.2.1 | ScalardiagnosticsResults | read-only | mandatory | A result of the most recent diagnostic test for the whole stack. |
| 1.3.6.1.4.1.343.2.11.1.2.2.2 | ScalardiagnosticsTime | read-only | mandatory | The date and time of the most recent diagnostic test for the whole stack. |
| 1.3.6.1.4.1.343.2.11.1.2.2.3 | ScalarlastDiagnosticsTest | read-only | mandatory | The number indicating what diagnostic test was run last. The list represents the power-up diagnostic test sequence. Normally the returned value should be the i… |
| 1.3.6.1.4.1.343.2.11.1.2.3 | NodecarrierStatusBChangeEvent | The status (inserted/running) of the CP in slot B has changed. | ||
| 1.3.6.1.4.1.343.2.11.1.2.3 | NodecommGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.3.1 | ScalarcommNumComms | read-only | mandatory | The number of SNMP Communities currently configured in this system. This number should reflect the number of entries in the commInfoTable. |
| 1.3.6.1.4.1.343.2.11.1.2.3.2 | TablecommInfoTable | not-accessible | mandatory | A list of Switch Configuration Community Entries |
| 1.3.6.1.4.1.343.2.11.1.2.3.2.1 | RowcommInfoEntry | not-accessible | mandatory | A list of Community properties for the Switch. |
| 1.3.6.1.4.1.343.2.11.1.2.3.2.1.1 | ColumncommInfoIndex | read-write | mandatory | An index that uniquely identifies an entry in the Switch Community Info Table. |
| 1.3.6.1.4.1.343.2.11.1.2.3.2.1.2 | ColumncommInfoName | read-write | mandatory | The name of this Switch Community Entry. |
| 1.3.6.1.4.1.343.2.11.1.2.3.2.1.3 | ColumncommInfoGet | read-write | mandatory | The GET permission for the community. |
| 1.3.6.1.4.1.343.2.11.1.2.3.2.1.4 | ColumncommInfoSet | read-write | mandatory | The SET permission for the community. |
| 1.3.6.1.4.1.343.2.11.1.2.3.2.1.5 | ColumncommInfoTrap | read-write | mandatory | The TRAP permission for the community. |
| 1.3.6.1.4.1.343.2.11.1.2.3.3 | ScalarcommAltTrapPort | read-write | mandatory | An alternate port to which the agent will send TRAP notifications. Note that the agent will continue to send TRAPs to the SNMP port. Setting this value to zero… |
| 1.3.6.1.4.1.343.2.11.1.2.3.4 | ScalarcommSnmpSecurityLevel | read-write | mandatory | Security level to be used by the agent when checking requests. Level 1 check community string on get and set. Level 2 check community string on get, community … |
| 1.3.6.1.4.1.343.2.11.1.2.4 | NodehostGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.4 | NodemediaCardChangeEvent | One or more of the media cards has been inserted or removed. | ||
| 1.3.6.1.4.1.343.2.11.1.2.4.1 | ScalarhostNumHosts | read-only | mandatory | The current number of SNMP hosts in the system. Each host is allowed to perform get, set, and trap operations based on its associated community. |
| 1.3.6.1.4.1.343.2.11.1.2.4.2 | TablehostInfoTable | not-accessible | mandatory | A list of Switch Configuration Host Entries |
| 1.3.6.1.4.1.343.2.11.1.2.4.2.1 | RowhostInfoEntry | not-accessible | mandatory | A list of Host properties for the Switch |
| 1.3.6.1.4.1.343.2.11.1.2.4.2.1.1 | ColumnhostInfoIndex | read-write | mandatory | An index that uniquely identifies an entry in the Switch Host Info Table. |
| 1.3.6.1.4.1.343.2.11.1.2.4.2.1.2 | ColumnhostInfoName | read-write | mandatory | The name of this Switch Host Entry. |
| 1.3.6.1.4.1.343.2.11.1.2.4.2.1.3 | ColumnhostInfoIp | read-write | mandatory | The IP Address for the host. |
| 1.3.6.1.4.1.343.2.11.1.2.4.2.1.4 | ColumnhostInfoComm | read-write | mandatory | The name of the community this host belongs to. |
| 1.3.6.1.4.1.343.2.11.1.2.5 | NodefanFailEvent | One or more the fans has failed. | ||
| 1.3.6.1.4.1.343.2.11.1.2.5 | NodeserialGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.5.1 | ScalarserialBaudRate | read-write | mandatory | The baud rate in bits per second of the RS-232 port. |
| 1.3.6.1.4.1.343.2.11.1.2.5.2 | ScalarmodemControlLines | read-write | mandatory | Indicates whether the RS-232 port modem control lines are enabled. |
| 1.3.6.1.4.1.343.2.11.1.2.6 | NodepowerSupplyFailEvent | One or more of the power supplies has failed. | ||
| 1.3.6.1.4.1.343.2.11.1.2.7 | NodehighTemperatureEvent | The temperature has exceeded the high temperature mark; the switch is shutting down immediately. | ||
| 1.3.6.1.4.1.343.2.11.1.2.8 | NoderisingTemperatureEvent | The temperature of the switch is rising. If the temperature continues to rise, the switch will shut down. | ||
| 1.3.6.1.4.1.343.2.11.1.2.9 | NodefallingTemperatureEvent | The temperature of the switch was dangerously high, but now the temperature has fallen back into the normal operating range. | ||
| 1.3.6.1.4.1.343.2.11.1.2.9 | NodespanGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.9.1 | ScalarspanOnOff | read-write | mandatory | Turns Spanning Tree ON/OFF for the switch. |
| 1.3.6.1.4.1.343.2.11.1.2.9.2 | ScalarspanType | read-write | mandatory | Type of spanning tree. |
| 1.3.6.1.4.1.343.2.11.1.2.9.4 | ScalarspanResetDefaults | read-write | mandatory | Reset all settable spanning tree parameters to defaults. |
| 1.3.6.1.4.1.343.2.11.1.2.9.5 | ScalarspanRapid | read-write | mandatory | When spanType is STP, turns Spanning Tree Rapid Reconfiguration ON/OFF. |
| 1.3.6.1.4.1.343.2.11.1.2.9.6 | TablespanPortTable | not-accessible | mandatory | Table containing per-port status for single spanning tree. |
| 1.3.6.1.4.1.343.2.11.1.2.9.6.1 | RowspanPortEntry | not-accessible | mandatory | Per-port status for single spanning tree. |
| 1.3.6.1.4.1.343.2.11.1.2.9.6.1.1 | ColumnspanPortPort | read-only | mandatory | The port number on the switch. |
| 1.3.6.1.4.1.343.2.11.1.2.9.6.1.2 | ColumnspanPortQuickStatus | read-write | mandatory | The current status, enabled or disabled, of Port Quick for this port. |
| 1.3.6.1.4.1.343.2.11.1.2.9.6.1.3 | ColumnspanPortAuto | read-only | mandatory | Path cost is either Fixed or Auto. If Auto, cost is calculated automatically, and depends on media data rates and link aggregation. |
| 1.3.6.1.4.1.343.2.11.1.2.10 | NodefanGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.10 | NodestormBcastControlDiscardEvent | The broadcast framerate on this port has exceeded the threshold level set by the user. The storm control software has put this port into frame discard mode. | ||
| 1.3.6.1.4.1.343.2.11.1.2.10.1 | ScalarfanNumFans | read-only | mandatory | The total number of fans possible in this chassis. A fan need not be present to count. |
| 1.3.6.1.4.1.343.2.11.1.2.10.2 | TablefanInfoTable | not-accessible | mandatory | A list of Fan States |
| 1.3.6.1.4.1.343.2.11.1.2.10.2.1 | RowfanInfoEntry | not-accessible | mandatory | A list of Fan properties for the Switch |
| 1.3.6.1.4.1.343.2.11.1.2.10.2.1.1 | ColumnfanIndex | read-only | mandatory | An index that uniquely identifies an entry in the Switch Fan Table. |
| 1.3.6.1.4.1.343.2.11.1.2.10.2.1.2 | ColumnfanStatus | read-write | mandatory | States operational status of Fan. |
| 1.3.6.1.4.1.343.2.11.1.2.11 | NodepsGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.11 | NodestormMcastControlDiscardEvent | The multicast framerate on this port has exceeded the threshold level set by the user. The storm control software has put this port into frame discard mode. | ||
| 1.3.6.1.4.1.343.2.11.1.2.11.1 | ScalarpsNumber | read-only | mandatory | The number of power supplies this chassis is capable of holding. A power supply need not be present to count. |
| 1.3.6.1.4.1.343.2.11.1.2.11.2 | TablepsInfoTable | not-accessible | mandatory | A list of Power Supply States |
| 1.3.6.1.4.1.343.2.11.1.2.11.2.1 | RowpsInfoEntry | not-accessible | mandatory | A list of Power Supply properties for the Switch |
| 1.3.6.1.4.1.343.2.11.1.2.11.2.1.1 | ColumnpsIndex | read-only | mandatory | An index that uniquely identifies an entry in the Switch Power Supply Table. |
| 1.3.6.1.4.1.343.2.11.1.2.11.2.1.2 | ColumnpsPresent | read-only | mandatory | States presence of Power Supply. |
| 1.3.6.1.4.1.343.2.11.1.2.11.2.1.3 | ColumnpsStatus | read-only | mandatory | States operational status of Power Supply. |
| 1.3.6.1.4.1.343.2.11.1.2.13 | NodetempGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.13.1 | ScalartempCurrent | read-only | mandatory | The current temperature of the switch in degrees centigrade. |
| 1.3.6.1.4.1.343.2.11.1.2.13.2 | ScalartempAlarm | read-only | mandatory | The status of the temperature alarm. This alarm is on if the current temperature exceeds the high water mark. |
| 1.3.6.1.4.1.343.2.11.1.2.13.3 | ScalartempHighest | read-only | mandatory | The highest temperature reached after the temperature alarm. If the alarm is not active, the value is zero. |
| 1.3.6.1.4.1.343.2.11.1.2.13.4 | ScalartempHigh | read-write | mandatory | The high water mark for the temperature. If this temperature is exceeded, the temperature alarm is activated. |
| 1.3.6.1.4.1.343.2.11.1.2.13.5 | ScalartempLow | read-write | mandatory | The low water mark for the temperature. If the temperature falls below the low water mark, the temperature alarm will be reset. |
| 1.3.6.1.4.1.343.2.11.1.2.14 | NodegigabitGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.14.2 | TablegigabitPortTable | not-accessible | mandatory | This table contains the per port gigabit configurables. The indexes reference a gigabit slot, and the ports numbered from one from the left most port. |
| 1.3.6.1.4.1.343.2.11.1.2.14.2.1 | RowgigabitPortTableEntry | not-accessible | mandatory | A list of gigabit configurables for the switch |
| 1.3.6.1.4.1.343.2.11.1.2.14.2.1.1 | ColumngigabitPortTableSlot | read-only | mandatory | The slot in which this gigabit card resides. This slot should be the same as one of the valid gigabit slots in the slot table of this MIB. |
| 1.3.6.1.4.1.343.2.11.1.2.14.2.1.2 | ColumngigabitPortTablePort | read-only | mandatory | The number of the gigabit port on the card. These ports specify an individual port on a gigabit switch or a gigabit repeater. A port here does not represent a … |
| 1.3.6.1.4.1.343.2.11.1.2.14.2.1.4 | ColumngigabitPortTableLinkState | read-only | mandatory | This field shows the current link state of the gigabit sub-port. |
| 1.3.6.1.4.1.343.2.11.1.2.14.2.1.5 | ColumngigabitPortTablePortAutoNeg | read-write | mandatory | The current ability of this port to participate in autonegotiation. |
| 1.3.6.1.4.1.343.2.11.1.2.15 | NodetenHundredGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.15.1 | TabletenHundredPortTable | not-accessible | mandatory | This table contains the per port information for the 10/100 Ethernet boards in the system. This table will be indexed by slot and port. |
| 1.3.6.1.4.1.343.2.11.1.2.15.1.1 | RowtenHundredPortTableEntry | not-accessible | mandatory | A list of 10/100 Ethernet configurables for the switch. |
| 1.3.6.1.4.1.343.2.11.1.2.15.1.1.1 | ColumntenHundredPortTableSlot | read-only | mandatory | The slot in which this 10/100 card resides. This slot should be the same as one of the valid 10/100 slots in the slot table of this MIB. |
| 1.3.6.1.4.1.343.2.11.1.2.15.1.1.2 | ColumntenHundredPortTablePort | read-only | mandatory | The number of the 10/100 port on the system. A port here represents a unique interface in the the interfaces table. |
| 1.3.6.1.4.1.343.2.11.1.2.15.1.1.3 | ColumntenHundredPortTableLinkState | read-only | mandatory | This field shows the current link state of the 10/100 port. |
| 1.3.6.1.4.1.343.2.11.1.2.15.1.1.4 | ColumntenHundredPortTableConfig | read-write | mandatory | The autonegotiate mode, speed, and duplex mode for this port. If link state is UP, then this object represents the settings for the active connect. If link sta… |
| 1.3.6.1.4.1.343.2.11.1.2.16 | NodevlanGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.16.1 | ScalarvlanValid | read-only | mandatory | This field displays if the current VLAN configuration in the Switch is valid. |
| 1.3.6.1.4.1.343.2.11.1.2.16.2 | TablevlanConfigTable | not-accessible | mandatory | This table contains the virtual lan configuration parameters for each virtual lan configured in the system. |
| 1.3.6.1.4.1.343.2.11.1.2.16.2.1 | RowvlanConfigEntry | not-accessible | mandatory | An entry containing information about the Virtual Lan configuration. |
| 1.3.6.1.4.1.343.2.11.1.2.16.2.1.1 | ColumnvlanConfigVID | read-only | mandatory | The Virtual Lan Id number. |
| 1.3.6.1.4.1.343.2.11.1.2.16.2.1.2 | ColumnvlanConfigName | read-write | mandatory | The name associated with this virtual lan ID. |
| 1.3.6.1.4.1.343.2.11.1.2.16.2.1.3 | ColumnvlanConfigIpAddr | read-write | mandatory | The IP address associated with this virtual lan. |
| 1.3.6.1.4.1.343.2.11.1.2.16.2.1.4 | ColumnvlanConfigNetmask | read-write | mandatory | The netmask associated with this virtual lan. |
| 1.3.6.1.4.1.343.2.11.1.2.16.2.1.5 | ColumnvlanConfigBroadcast | read-write | mandatory | The broadcast address associated with this virtual lan. |
| 1.3.6.1.4.1.343.2.11.1.2.16.2.1.6 | ColumnvlanConfigRouting | read-write | mandatory | Enable or disable routing on a per-vlan basis. |
| 1.3.6.1.4.1.343.2.11.1.2.16.3 | ScalarvlanReset | read-write | mandatory | Reset VLAN configuration to factory defaults. |
| 1.3.6.1.4.1.343.2.11.1.2.16.4 | TablevlanPortTable | not-accessible | mandatory | This table contains the virtual lan configuration parameters which are configured on a per-port basis. |
| 1.3.6.1.4.1.343.2.11.1.2.16.4.1 | RowvlanPortEntry | not-accessible | mandatory | An entry containing the virtual lan configuration parameters which are configured on a per-port basis. |
| 1.3.6.1.4.1.343.2.11.1.2.16.4.1.1 | ColumnvlanPortNumber | read-only | mandatory | External port number. This number corresponds to the ifTable ifIndex. |
| 1.3.6.1.4.1.343.2.11.1.2.16.4.1.2 | ColumnvlanPortTrustedVid | read-write | mandatory | If VlanPortTrustedVid is 'true', then the VID of tagged frames is alwasy used, otherwise, the PVID of the port is used even if the frame is tagged. |
| 1.3.6.1.4.1.343.2.11.1.2.16.4.1.3 | ColumnvlanPortTrustedPriority | read-write | mandatory | If VlanPortTrustedPriority is 'true', then the priority of tagged frames is always used, otherwise, the default port priority is used even if the frame is tagg… |
| 1.3.6.1.4.1.343.2.11.1.2.17 | NoderoutingGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.17.1 | ScalarroutingRouterId | read-write | mandatory | A 32-bit integer uniquely identifying the switch. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface add… |
| 1.3.6.1.4.1.343.2.11.1.2.17.2 | ScalarroutingScanInterval | read-write | mandatory | The number of seconds indicating how often GateD will check with the kernel for the interface changes when no notification is received from the kernel. This ob… |
| 1.3.6.1.4.1.343.2.11.1.2.17.3 | NoderoutingConfigGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.17.3.1 | ScalarroutingEnable | read-write | mandatory | Enable/disable routing. Writing enableInit to this object starts the GateD process, but does not enable any routing protocols. enableRestore starts the GateD p… |
| 1.3.6.1.4.1.343.2.11.1.2.17.3.2 | ScalarroutingRipConf | read-write | mandatory | Enable/disable RIPv2. |
| 1.3.6.1.4.1.343.2.11.1.2.17.3.3 | ScalarroutingOspfConf | read-write | mandatory | Enable/disable OSPF. |
| 1.3.6.1.4.1.343.2.11.1.2.17.4 | NoderoutingPreferencesGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.17.4.1 | ScalarroutingOspfPref | read-write | mandatory | The preference level for OSPF-based routing This object cannot be accessed unless routing is enabled. |
| 1.3.6.1.4.1.343.2.11.1.2.17.4.2 | ScalarroutingStaticConfigPref | read-write | mandatory | The preference level for the default static route. This object cannot be accessed unless routing is enabled. |
| 1.3.6.1.4.1.343.2.11.1.2.17.4.3 | ScalarroutingRipPref | read-write | mandatory | The preference level for rip-based routing This object cannot be accessed unless routing is enabled. |
| 1.3.6.1.4.1.343.2.11.1.2.17.4.4 | ScalarroutingOspfAsExtPref | read-write | mandatory | The preference level for OSPF as extern based routing This object cannot be accessed unless routing is enabled. |
| 1.3.6.1.4.1.343.2.11.1.2.17.5 | TableroutingIfPrefTable | not-accessible | mandatory | A list of local interfaces and their preference levels. |
| 1.3.6.1.4.1.343.2.11.1.2.17.5.1 | RowroutingIfPrefEntry | not-accessible | mandatory | An interface-preference pair. |
| 1.3.6.1.4.1.343.2.11.1.2.17.5.1.1 | ColumnroutingIfPrefAddress | read-only | mandatory | The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for… |
| 1.3.6.1.4.1.343.2.11.1.2.17.5.1.2 | ColumnroutingIfPref | read-write | mandatory | The preference level for this interface |
| 1.3.6.1.4.1.343.2.11.1.2.17.6 | ScalarstaticRouteNumber | read-only | mandatory | The number of current staticRouteTable entries that are not invalid. |
| 1.3.6.1.4.1.343.2.11.1.2.17.7 | TablestaticRouteTable | not-accessible | mandatory | This entity's static IP routing config table. |
| 1.3.6.1.4.1.343.2.11.1.2.17.7.1 | RowstaticRouteEntry | not-accessible | mandatory | A particular static route to a particular destination. |
| 1.3.6.1.4.1.343.2.11.1.2.17.7.1.1 | ColumnstaticRouteDest | read-only | mandatory | The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance o… |
| 1.3.6.1.4.1.343.2.11.1.2.17.7.1.2 | ColumnstaticRouteMask | read-only | mandatory | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the staticRouteDest field. For those systems that do n… |
| 1.3.6.1.4.1.343.2.11.1.2.17.7.1.3 | ColumnstaticRouteNextHop | read-only | mandatory | On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0. |
| 1.3.6.1.4.1.343.2.11.1.2.17.7.1.4 | ColumnstaticRouteIf | read-write | mandatory | The local interface through which the next hop of this route should be reached. |
| 1.3.6.1.4.1.343.2.11.1.2.17.7.1.5 | ColumnstaticRoutePref | read-write | mandatory | The preference value for this route. Default value is 20 for the default route, 60 otherwise. |
| 1.3.6.1.4.1.343.2.11.1.2.17.7.1.6 | ColumnstaticRouteType | read-write | mandatory | The type of route. |
| 1.3.6.1.4.1.343.2.11.1.2.17.7.1.7 | ColumnstaticRouteStatus | read-write | mandatory | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.343.2.11.1.2.17.8 | ScalarroutingSaveConfig | read-write | mandatory | Write to this object to save the current router configuration to nonvolatile storage. The agent will perform an activate before saving. You cannot save the con… |
| 1.3.6.1.4.1.343.2.11.1.2.18 | NodeerrorGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.18.1 | TableerrorTable | not-accessible | mandatory | A list of SNMP User-error Entries. |
| 1.3.6.1.4.1.343.2.11.1.2.18.1.1 | RowerrorEntry | not-accessible | mandatory | A description of an SNMP user-error. |
| 1.3.6.1.4.1.343.2.11.1.2.18.1.1.1 | ColumnerrorIndex | read-only | mandatory | An index that uniquely identifies an entry in the Error Table. |
| 1.3.6.1.4.1.343.2.11.1.2.18.1.1.2 | ColumnerrorMsg | read-only | mandatory | The description of the SNMP configuration error. |
| 1.3.6.1.4.1.343.2.11.1.2.18.1.1.3 | ColumnerrorOid | read-only | mandatory | The object ID for the SNMP manager request which caused this error. |
| 1.3.6.1.4.1.343.2.11.1.2.18.1.1.4 | ColumnerrorTime | read-only | mandatory | The time, in hundreths of a second since system boot, that the error occurred. |
| 1.3.6.1.4.1.343.2.11.1.2.18.2 | ScalarclearErrorTable | read-write | mandatory | Writing true to this object clears the SNMP Error Table. |
| 1.3.6.1.4.1.343.2.11.1.2.19 | NodelinkStateGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.19.1 | TablelinkStateTable | not-accessible | mandatory | This table contains the link states of every port on the switch, indexed by slot number and local (per-slot) port number. |
| 1.3.6.1.4.1.343.2.11.1.2.19.1.1 | RowlinkStateEntry | not-accessible | mandatory | Each entry contains the link state and last-changed time of a port on the switch, indexed by slot number and local port number. |
| 1.3.6.1.4.1.343.2.11.1.2.19.1.1.1 | ColumnlinkStateSlot | read-only | mandatory | The index of this media card on the Switch chassis. Media card indices begin at one, at the top of the chassis. |
| 1.3.6.1.4.1.343.2.11.1.2.19.1.1.2 | ColumnlinkStatePort | read-only | mandatory | The index of this port on the media card. Port indices begin at one, at the left side of the card, when viewed from the front. |
| 1.3.6.1.4.1.343.2.11.1.2.19.1.1.3 | ColumnlinkStateState | read-only | mandatory | The current link state of this port. |
| 1.3.6.1.4.1.343.2.11.1.2.19.1.1.4 | ColumnlinkStateTime | read-only | mandatory | The most recent time, in hundreths of a second since system boot, that this port's link state changed. |
| 1.3.6.1.4.1.343.2.11.1.2.20 | NodecarrierGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.20.1 | ScalarcarrierCPSlotID | read-only | mandatory | Indicates which slot contains the master CP. |
| 1.3.6.1.4.1.343.2.11.1.2.20.2 | ScalarcarrierStatusA | read-only | mandatory | Indicates whether CP board A is inserted, and if inserted, whether it is running. |
| 1.3.6.1.4.1.343.2.11.1.2.20.3 | ScalarcarrierStatusB | read-only | mandatory | Indicates whether CP board B is inserted, and if inserted, whether it is running. |
| 1.3.6.1.4.1.343.2.11.1.2.21 | NodemoduleGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.21.1 | TablemoduleTable | not-accessible | mandatory | Table containing hardware and software configuration information. |
| 1.3.6.1.4.1.343.2.11.1.2.21.1.1 | RowmoduleEntry | not-accessible | mandatory | Hardware and software configuration data. |
| 1.3.6.1.4.1.343.2.11.1.2.21.1.1.1 | ColumnmoduleSlotNum | read-only | mandatory | The Slot ID of the switch. Slot 1 is physically the top slot in a chassis. |
| 1.3.6.1.4.1.343.2.11.1.2.21.1.1.2 | ColumnmoduleCard | read-only | mandatory | The specific card within a slot. |
| 1.3.6.1.4.1.343.2.11.1.2.21.1.1.3 | ColumnmoduleContent | read-only | mandatory | The content-type for this entry. |
| 1.3.6.1.4.1.343.2.11.1.2.21.1.1.4 | ColumnmoduleDataValid | read-only | mandatory | Indicates whether the version text is initialized. |
| 1.3.6.1.4.1.343.2.11.1.2.21.1.1.5 | ColumnmoduleText | read-only | mandatory | A text string containing hardware or sofware version information. |
| 1.3.6.1.4.1.343.2.11.1.2.22 | NodepingGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.22.1 | ScalarpingHostAddress | read-write | mandatory | The hostname or host IP address for the PING. |
| 1.3.6.1.4.1.343.2.11.1.2.22.2 | ScalarpingRequest | read-write | mandatory | Writing any value to this object sends a PING. |
| 1.3.6.1.4.1.343.2.11.1.2.22.3 | ScalarpingTime | read-only | mandatory | PING roundtrip time in milliseconds. |
| 1.3.6.1.4.1.343.2.11.1.2.22.4 | ScalarpingStatus | read-only | mandatory | Status of most recent ping request. |
| 1.3.6.1.4.1.343.2.11.1.2.23 | NodednsGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.23.1 | ScalardnsEnable | read-write | mandatory | The current state of the Domain Name Server in the Switch. If this field is set to enable, Domain Name Services will be supported. |
| 1.3.6.1.4.1.343.2.11.1.2.23.2 | ScalardnsDomainName | read-write | mandatory | The Domain Name for the network this switch is on. |
| 1.3.6.1.4.1.343.2.11.1.2.23.3 | ScalardnsPrimaryServer | read-write | mandatory | The primary DNS server for the network this switch is on. |
| 1.3.6.1.4.1.343.2.11.1.2.23.4 | ScalardnsBackupServer | read-write | mandatory | The secondary DNS server for the network this switch is on. |
| 1.3.6.1.4.1.343.2.11.1.2.24 | NodestormControlGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.24.1 | TablestormBcastControlTable | not-accessible | mandatory | Table containing configuration and status information for broadcast storm control. |
| 1.3.6.1.4.1.343.2.11.1.2.24.1.1 | RowstormBcastControlEntry | not-accessible | mandatory | Configuration and status for broadcast storm control. |
| 1.3.6.1.4.1.343.2.11.1.2.24.1.1.1 | ColumnstormBcastControlPort | read-only | mandatory | The port number on the switch, equivalent to ifIndex. |
| 1.3.6.1.4.1.343.2.11.1.2.24.1.1.2 | ColumnstormBcastControlThreshold | read-write | mandatory | The broadcast frame rate, in percent of total bandwidth, at which discarding is triggered for this port. |
| 1.3.6.1.4.1.343.2.11.1.2.24.1.1.3 | ColumnstormBcastControlDiscardPeriod | read-write | mandatory | The amount of time, in seconds, that discarding will continue on this port once triggered. If the discard period is set to zero seconds and the port transition… |
| 1.3.6.1.4.1.343.2.11.1.2.24.1.1.4 | ColumnstormBcastControlRate | read-only | mandatory | The current broadcast rate, measured as a precentage of total bandwidth, for this port. |
| 1.3.6.1.4.1.343.2.11.1.2.24.1.1.5 | ColumnstormBcastControlDisables | read-only | mandatory | The number of times this port entered the discard state as a result of storm control. |
| 1.3.6.1.4.1.343.2.11.1.2.24.1.1.6 | ColumnstormBcastControlEnables | read-only | mandatory | The number of times this port exited the discard state as a result of storm control. |
| 1.3.6.1.4.1.343.2.11.1.2.24.1.1.7 | ColumnstormBcastControlTimeLeft | read-only | mandatory | The number of seconds remaining until this port will exit the discard state. |
| 1.3.6.1.4.1.343.2.11.1.2.24.1.1.8 | ColumnstormBcastControlStatus | read-write | mandatory | The current status of this port with respect to storm control. If the port is in the discarding state, then writing 'exitDiscardState' to stormBcastControlStat… |
| 1.3.6.1.4.1.343.2.11.1.2.24.2 | TablestormMcastControlTable | not-accessible | mandatory | Table containing configuration and status information for multicast storm control. |
| 1.3.6.1.4.1.343.2.11.1.2.24.2.1 | RowstormMcastControlEntry | not-accessible | mandatory | Configuration and status for multicast storm control. |
| 1.3.6.1.4.1.343.2.11.1.2.24.2.1.1 | ColumnstormMcastControlPort | read-only | mandatory | The port number on the switch, equivalent to ifIndex. |
| 1.3.6.1.4.1.343.2.11.1.2.24.2.1.2 | ColumnstormMcastControlThreshold | read-write | mandatory | The multicast frame rate, in percent of total bandwidth, at which discarding is triggered for this port. |
| 1.3.6.1.4.1.343.2.11.1.2.24.2.1.3 | ColumnstormMcastControlDiscardPeriod | read-write | mandatory | The amount of time, in seconds, that discarding will continue on this port once triggered. If the discard period is set to zero seconds and the port transition… |
| 1.3.6.1.4.1.343.2.11.1.2.24.2.1.4 | ColumnstormMcastControlRate | read-only | mandatory | The current multicast rate, measured as a precentage of total bandwidth, for this port. |
| 1.3.6.1.4.1.343.2.11.1.2.24.2.1.5 | ColumnstormMcastControlDisables | read-only | mandatory | The number of times this port entered the discard state as a result of storm control. |
| 1.3.6.1.4.1.343.2.11.1.2.24.2.1.6 | ColumnstormMcastControlEnables | read-only | mandatory | The number of times this port exited the discard state as a result of storm control. |
| 1.3.6.1.4.1.343.2.11.1.2.24.2.1.7 | ColumnstormMcastControlTimeLeft | read-only | mandatory | The number of seconds remaining until this port will exit the discard state. |
| 1.3.6.1.4.1.343.2.11.1.2.24.2.1.8 | ColumnstormMcastControlStatus | read-write | mandatory | The current status of this port with respect to storm control. If the port is in the discarding state, then writing 'exitDiscardState' to stormMcastControlStat… |
| 1.3.6.1.4.1.343.2.11.1.2.25 | NodeigmpSnoopingGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.25.1 | ScalarigmpSnoopingEnable | read-write | mandatory | Enable or disable IGMP snooping for system. |
| 1.3.6.1.4.1.343.2.11.1.2.25.2 | ScalarigmpSnoopingResetControl | read-write | mandatory | Reset all control ports in the system to NORMAL mode. Reading always returns other(1), Writing reset(2) performs the reset. |
| 1.3.6.1.4.1.343.2.11.1.2.25.3 | ScalarigmpSnoopingResetData | read-write | mandatory | Reset all data ports in the system to NORMAL mode. Reading always returns other(1), Writing reset(2) performs the reset. |
| 1.3.6.1.4.1.343.2.11.1.2.25.4 | ScalarigmpSnoopingAgeTime | read-write | mandatory | Set the snoop aging time. |
| 1.3.6.1.4.1.343.2.11.1.2.25.5 | TableigmpSnoopingVlanResetTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.11.1.2.25.5.1 | RowigmpSnoopingVlanResetEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.11.1.2.25.5.1.1 | ColumnigmpSnoopingVlanResetVlanId | read-only | mandatory | Vlan identifier. |
| 1.3.6.1.4.1.343.2.11.1.2.25.5.1.2 | ColumnigmpSnoopingVlanResetData | read-write | mandatory | Reset all data ports in the vlan to NORMAL mode. Reading always returns other(1), Writing reset(2) performs the reset. |
| 1.3.6.1.4.1.343.2.11.1.2.25.5.1.3 | ColumnigmpSnoopingVlanResetControl | read-write | mandatory | Reset all control ports in the vlan to NORMAL mode. Reading always returns other(1), Writing reset(2) performs the reset. |
| 1.3.6.1.4.1.343.2.11.1.2.25.6 | TableigmpSnoopingDataPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.11.1.2.25.6.1 | RowigmpSnoopingDataPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.11.1.2.25.6.1.1 | ColumnigmpSnoopingDataPortVlanId | read-only | mandatory | Vlan identifier. |
| 1.3.6.1.4.1.343.2.11.1.2.25.6.1.2 | ColumnigmpSnoopingDataPortNumber | read-only | mandatory | External port number. This number corresponds to the ifTable ifIndex. |
| 1.3.6.1.4.1.343.2.11.1.2.25.6.1.3 | ColumnigmpSnoopingDataPortGroup | read-only | mandatory | |
| 1.3.6.1.4.1.343.2.11.1.2.25.6.1.4 | ColumnigmpSnoopingDataPortIpAddr | read-only | mandatory | Multicast IP Address fixed or forbidden, if data port group ip=2 |
| 1.3.6.1.4.1.343.2.11.1.2.25.6.1.5 | ColumnigmpSnoopingDataPortState | read-write | mandatory | Normal Fixed Forbid Write fixed(4) or forbid(5) to this object to create a new row or modify an existing row. Write normal(3) to this object to remove an exist… |
| 1.3.6.1.4.1.343.2.11.1.2.25.7 | TableigmpSnoopingControlPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.11.1.2.25.7.1 | RowigmpSnoopingControlPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.11.1.2.25.7.1.1 | ColumnigmpSnoopingControlPortVlanId | read-only | mandatory | Vlan Identifier. |
| 1.3.6.1.4.1.343.2.11.1.2.25.7.1.2 | ColumnigmpSnoopingControlPortNumber | read-only | mandatory | External port number. This number corresponds to the ifTable ifIndex. |
| 1.3.6.1.4.1.343.2.11.1.2.25.7.1.3 | ColumnigmpSnoopingControlPortState | read-write | mandatory | |
| 1.3.6.1.4.1.343.2.11.1.2.25.7.1.4 | ColumnigmpSnoopingControlPortRowStatus | read-write | mandatory | Used to control creation and deletion of rows. |
| 1.3.6.1.4.1.343.2.11.1.2.25.8 | TableigmpSnoopingStatusTable | not-accessible | mandatory | Table of entries for reporting IGMP snooping status with Mac address to Port address mapping |
| 1.3.6.1.4.1.343.2.11.1.2.25.8.1 | RowigmpSnoopingStatusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.11.1.2.25.8.1.1 | ColumnigmpSnoopingVlanId | read-only | mandatory | Vlan identifier. |
| 1.3.6.1.4.1.343.2.11.1.2.25.8.1.2 | ColumnigmpSnoopingMcastMacAddr | read-only | mandatory | Multicast mac address. |
| 1.3.6.1.4.1.343.2.11.1.2.25.8.1.3 | ColumnigmpSnoopingPort | read-only | mandatory | External port number. This number corresponds to the ifTable ifIndex. |
| 1.3.6.1.4.1.343.2.11.1.2.25.9 | TableigmpSnoopingIpStatusTable | not-accessible | mandatory | Table of entries for reporting IGMP snooping status with Mac address to Ip address mapping |
| 1.3.6.1.4.1.343.2.11.1.2.25.9.1 | RowigmpSnoopingIpStatusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.343.2.11.1.2.25.9.1.1 | ColumnigmpSnoopingIpVlanId | read-only | mandatory | Vlan identifier. |
| 1.3.6.1.4.1.343.2.11.1.2.25.9.1.2 | ColumnigmpSnoopingIpMcastMacAddr | read-only | mandatory | Multicast mac address. |
| 1.3.6.1.4.1.343.2.11.1.2.25.9.1.3 | ColumnigmpSnoopingIpAddress | read-only | mandatory | Multicast IP address. There can be several of these for each multicast mac address. |
| 1.3.6.1.4.1.343.2.11.1.2.26 | NodepvstpGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.26.1 | TablepvstpTable | not-accessible | mandatory | Per Vlan Spanning Tree Protocol Table. |
| 1.3.6.1.4.1.343.2.11.1.2.26.1.1 | RowpvstpEntry | not-accessible | mandatory | Information about an instance of a spanning tree for the specified vlan. All time (TimeTic, Timeout) values are in hundreths of a second. |
| 1.3.6.1.4.1.343.2.11.1.2.26.1.1.1 | ColumnpvstpVlanId | read-only | mandatory | Vlan Identifier. |
| 1.3.6.1.4.1.343.2.11.1.2.26.1.1.2 | ColumnpvstpProtocolSpecification | read-only | mandatory | What spanning tree protocol is being run. ieee8021w1s1 indicates the version 1.0 implementation of 802.1w and 802.1s. |
| 1.3.6.1.4.1.343.2.11.1.2.26.1.1.3 | ColumnpvstpPriority | read-write | mandatory | The first 2 octets of the bridge identifier. |
| 1.3.6.1.4.1.343.2.11.1.2.26.1.1.4 | ColumnpvstpTimeSinceTopologyChange | read-only | mandatory | Time since topology change. |
| 1.3.6.1.4.1.343.2.11.1.2.26.1.1.5 | ColumnpvstpTopChanges | read-only | mandatory | Number of topology changes detected. |
| 1.3.6.1.4.1.343.2.11.1.2.26.1.1.6 | ColumnpvstpDesignatedRoot | read-only | mandatory | The current root of the spanning tree. |
| 1.3.6.1.4.1.343.2.11.1.2.26.1.1.7 | ColumnpvstpRootCost | read-only | mandatory | |
| 1.3.6.1.4.1.343.2.11.1.2.26.1.1.8 | ColumnpvstpRootPort | read-only | mandatory | Total cost to the root. |
| 1.3.6.1.4.1.343.2.11.1.2.26.1.1.9 | ColumnpvstpMaxAge | read-only | mandatory | Timeout on stp information. |
| 1.3.6.1.4.1.343.2.11.1.2.26.1.1.10 | ColumnpvstpHelloTime | read-only | mandatory | Configuration message interval. |
| 1.3.6.1.4.1.343.2.11.1.2.26.1.1.11 | ColumnpvstpHoldTime | read-only | mandatory | Minimum interval between transmition of configuration messages. |
| 1.3.6.1.4.1.343.2.11.1.2.26.1.1.12 | ColumnpvstpForwardDelay | read-only | mandatory | Length of time spent in each state. |
| 1.3.6.1.4.1.343.2.11.1.2.26.1.1.13 | ColumnpvstpBridgeMaxAge | read-write | mandatory | Value in hundredths of seconds which all bridges use for max age when this bridge is a root. Actual resolution is one second. |
| 1.3.6.1.4.1.343.2.11.1.2.26.1.1.14 | ColumnpvstpBridgeHelloTime | read-only | mandatory | Value to used for hello time when this bridge is a root. |
| 1.3.6.1.4.1.343.2.11.1.2.26.1.1.15 | ColumnpvstpBridgeForwardDelay | read-only | mandatory | Value used for forward delay when this bridge is a root. |
| 1.3.6.1.4.1.343.2.11.1.2.26.1.1.16 | ColumnpvstpBridgeRapid | read-write | mandatory | When spanType is pvstp, turns Spanning Tree Rapid Reconfiguration ON/OFF for the vlan. |
| 1.3.6.1.4.1.343.2.11.1.2.26.1.1.17 | ColumnpvstpBridgeId | read-only | mandatory | The Bridge ID in use for this VLAN. |
| 1.3.6.1.4.1.343.2.11.1.2.26.2 | TablepvstpPortTable | not-accessible | mandatory | Per Vlan Spanning Tree Protocol Port Table. |
| 1.3.6.1.4.1.343.2.11.1.2.26.2.1 | RowpvstpPortEntry | not-accessible | mandatory | Information about a specific port for an instance of a spanning tree for the specified vlan. All time (TimeTic, Timeout) values are in hundreths of a second. |
| 1.3.6.1.4.1.343.2.11.1.2.26.2.1.1 | ColumnpvstpPortVlanId | read-only | mandatory | Vlan identifier. |
| 1.3.6.1.4.1.343.2.11.1.2.26.2.1.2 | ColumnpvstpPort | read-only | mandatory | External port number. This number corresponds to the ifTable ifIndex. |
| 1.3.6.1.4.1.343.2.11.1.2.26.2.1.3 | ColumnpvstpPortPriority | read-write | mandatory | The value of the priority field. |
| 1.3.6.1.4.1.343.2.11.1.2.26.2.1.4 | ColumnpvstpPortState | read-only | mandatory | The port state defined by the application of the spanning tree protocol. |
| 1.3.6.1.4.1.343.2.11.1.2.26.2.1.5 | ColumnpvstpPortEnable | read-write | mandatory | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.343.2.11.1.2.26.2.1.6 | ColumnpvstpPortPathCost | read-write | mandatory | The contribution of the port to the path cost. Actual cost ranges from 1 to 65535. Zero is a magic number which sets the cost automatically. |
| 1.3.6.1.4.1.343.2.11.1.2.26.2.1.7 | ColumnpvstpPortDesignatedRoot | read-only | mandatory | The bridge identifier of the current root, as transmitted by the current designated bridge for the segment. |
| 1.3.6.1.4.1.343.2.11.1.2.26.2.1.8 | ColumnpvstpPortDesignatedCost | read-only | mandatory | Path cost for the designated port. |
| 1.3.6.1.4.1.343.2.11.1.2.26.2.1.9 | ColumnpvstpPortDesignatedBridge | read-only | mandatory | Bridge identifier of the bridge which this port see as the designated bridge for the segment. |
| 1.3.6.1.4.1.343.2.11.1.2.26.2.1.11 | ColumnpvstpPortDesignatedPort | read-only | mandatory | Port identifer of the port on the designated bridge for the segment. |
| 1.3.6.1.4.1.343.2.11.1.2.26.2.1.12 | ColumnpvstpPortForwardTransitions | read-only | mandatory | The number of times the port has transitioned from learning to forwarding state. |
| 1.3.6.1.4.1.343.2.11.1.2.26.2.1.13 | ColumnpvstpPortQuick | read-write | mandatory | When spanType is pvstp, turns quick port reconfiguration ON/OFF for the port. |
| 1.3.6.1.4.1.343.2.11.1.2.26.2.1.14 | ColumnpvstpPortAuto | read-only | mandatory | Path cost is either Fixed or Auto. If Auto, cost is calculated automatically, and depends on media data rates and link aggregation. |
| 1.3.6.1.4.1.343.2.11.1.2.27 | NoderelayGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.27.1 | ScalarrelayEnable | read-write | mandatory | Enabled-disabled status of BOOTP/DHCP relay agent. |
| 1.3.6.1.4.1.343.2.11.1.2.27.2 | ScalarrelayMaxHops | read-write | mandatory | Number of hops for the discard threshold for the BOOTP/DHCP relay agent. |
| 1.3.6.1.4.1.343.2.11.1.2.27.3 | TablerelayServerTable | not-accessible | mandatory | BOOTP/DHCP Relay Server Table. |
| 1.3.6.1.4.1.343.2.11.1.2.27.3.1 | RowrelayServerEntry | not-accessible | mandatory | Each BOOTP/DHCP server entry consists of a server index and an IP address. |
| 1.3.6.1.4.1.343.2.11.1.2.27.3.1.1 | ColumnrelayServerIndex | read-only | mandatory | Index of a BOOTP/DHCP relay server IP address. |
| 1.3.6.1.4.1.343.2.11.1.2.27.3.1.2 | ColumnrelayServerAddress | read-write | mandatory | IP address of a BOOTP/DHCP relay server. |
| 1.3.6.1.4.1.343.2.11.1.2.29 | NodeportMirrorGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.29.1 | TableportMirrorTable | not-accessible | mandatory | Port Mirror Table Table. |
| 1.3.6.1.4.1.343.2.11.1.2.29.1.1 | RowportMirrorEntry | not-accessible | mandatory | Information which defines which ports are currently being mirrored. |
| 1.3.6.1.4.1.343.2.11.1.2.29.1.1.1 | ColumnportMirrorSourcePort | read-only | mandatory | Port number of port being mirrored. |
| 1.3.6.1.4.1.343.2.11.1.2.29.1.1.2 | ColumnportMirrorMonitorPort | read-only | mandatory | Port number of the monitor port. |
| 1.3.6.1.4.1.343.2.11.1.2.29.1.1.3 | ColumnportMirrorRowStatus | read-write | mandatory | Used to control creation and deletion of rows. |
| 1.3.6.1.4.1.343.2.11.1.2.30 | NodeipAccessCtlGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.30.1 | TableipAccessCtlTable | not-accessible | mandatory | IP Access Control Table. |
| 1.3.6.1.4.1.343.2.11.1.2.30.1.1 | RowipAccessCtlEntry | not-accessible | mandatory | Information which defines the rules for IP Access Control. |
| 1.3.6.1.4.1.343.2.11.1.2.30.1.1.1 | ColumnipAccessCtlRuleNumber | read-only | mandatory | Rule number. |
| 1.3.6.1.4.1.343.2.11.1.2.30.1.1.2 | ColumnipAccessCtlSourceAddress | read-write | mandatory | Source IP address of rule. |
| 1.3.6.1.4.1.343.2.11.1.2.30.1.1.3 | ColumnipAccessCtlSourceMask | read-write | mandatory | Source IP mask of rule. |
| 1.3.6.1.4.1.343.2.11.1.2.30.1.1.4 | ColumnipAccessCtlDestinationAddress | read-write | mandatory | Destination IP address of rule. |
| 1.3.6.1.4.1.343.2.11.1.2.30.1.1.5 | ColumnipAccessCtlDestinationMask | read-write | mandatory | Destination IP mask of rule. |
| 1.3.6.1.4.1.343.2.11.1.2.30.1.1.6 | ColumnipAccessCtlType | read-write | mandatory | Type of rule. |
| 1.3.6.1.4.1.343.2.11.1.2.30.1.1.7 | ColumnipAccessCtlRowStatus | read-write | mandatory | Rule status. |
| 1.3.6.1.4.1.343.2.11.1.2.30.2 | ScalaripAccessCtlEnable | read-write | mandatory | Enabled-disabled status of IP Access Control. |
| 1.3.6.1.4.1.343.2.11.1.2.31 | NodefdbGroup | |||
| 1.3.6.1.4.1.343.2.11.1.2.31.1 | ScalarfdbLearningMode | read-write | mandatory | FDB learning mode; either Independent VLAN Learning(IVL), or Shared VLAN Learning(SVL). |
| 1.3.6.1.4.1.343.2.11.1.2.31.2 | TablefdbAgeTable | not-accessible | mandatory | Forwarding database aging information. |
| 1.3.6.1.4.1.343.2.11.1.2.31.2.1 | RowfdbAgeEntry | not-accessible | mandatory | FDB aging information. |
| 1.3.6.1.4.1.343.2.11.1.2.31.2.1.1 | ColumnfdbAgeId | read-only | mandatory | FDB ID for this entry. In IVL mode, this object is equivalent to the VLAN ID. In SVL mode, this object is one for all entries. |
| 1.3.6.1.4.1.343.2.11.1.2.31.2.1.2 | ColumnfdbAgeStatus | read-write | mandatory | Enable(1) or disable(2) aging. In SVL Mode, this object controls aging for the entire FDB. In IVL Mode, this object controls aging on a per-VLAN basis. |
| 1.3.6.1.4.1.343.2.11.1.2.31.2.1.3 | ColumnfdbAgeTime | read-write | mandatory | Aging time for layer-2 entries. In SVL Mode, this object controls aging for the entire FDB. In IVL Mode, this object controls aging on a per-VLAN basis. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Boolean | INTEGER {true(1), false(2) } | ||
| BridgeId | OCTET STRING (SIZE (8)) | ||
| EnableStatus | INTEGER {enable(1), disable(2) } | ||
| MacAddress | OCTET STRING(SIZE(6)) | ||
| PortNumber | INTEGER (1..96) | ||
| RowStatus | INTEGER {active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } | ||
| TimeInterval | INTEGER | ||
| Timeout | INTEGER | ||
| VlanId | INTEGER (1..4094) |