MIB Viewer

Search, upload, browse, or download from a database of over 11,000 SNMP MIBs. MIB Viewer lets you look up any MIB object by name, OID, or number, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

JUNIPER-ALARM-MIB

11 objects

This is Juniper Networks' implementation of enterprise specific MIB for alarms from the router chassis box.

Imported Objects

JUNIPER-SMI	jnxMibs
SNMPv2-SMI	Gauge32 MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TC	TimeStamp

OID	Name	Access	Status	Description
1.3.6.1.4.1.2636.3.4	IdentityjnxAlarms			This is Juniper Networks' implementation of enterprise specific MIB for alarms from the router chassis box.
1.3.6.1.4.1.2636.3.4.2	NodejnxCraftAlarms
1.3.6.1.4.1.2636.3.4.2.1	ScalarjnxAlarmRelayMode	read-only	current	The alarm relay mode of the craft interface panel for both yellow and red alarms. Both yellow and red alarms could be cut off by a front panel Alarm Cutoff / L…
1.3.6.1.4.1.2636.3.4.2.2	NodejnxYellowAlarms
1.3.6.1.4.1.2636.3.4.2.2.1	ScalarjnxYellowAlarmState	read-only	current	The yellow alarm state on the craft interface panel. The yellow alarm is on when there is some system warning such as maintenance alert or significant temperat…
1.3.6.1.4.1.2636.3.4.2.2.2	ScalarjnxYellowAlarmCount	read-only	current	The number of currently active and non-silent yellow alarms. This object is independent of the ACO/LT (Alarm Cut Off / Lamp Test) button.
1.3.6.1.4.1.2636.3.4.2.2.3	ScalarjnxYellowAlarmLastChange	read-only	current	The value of sysUpTime when the yellow alarm last changed - either from off to on or vice versa. Zero if unknown or never changed since the agent was up.
1.3.6.1.4.1.2636.3.4.2.3	NodejnxRedAlarms
1.3.6.1.4.1.2636.3.4.2.3.1	ScalarjnxRedAlarmState	read-only	current	The red alarm indication on the craft interface panel. The red alarm is on when there is some system failure or power supply failure or the system is experienc…
1.3.6.1.4.1.2636.3.4.2.3.2	ScalarjnxRedAlarmCount	read-only	current	The number of currently active and non-silent red alarms. This object is independent of the ACO/LT (Alarm Cut Off / Lamp Test) button.
1.3.6.1.4.1.2636.3.4.2.3.3	ScalarjnxRedAlarmLastChange	read-only	current	The value of sysUpTime when the red alarm last changed - either from off to on or vice versa. Zero if unknown or never changed since the agent was up.