JUNIPER-IFOPTICS-MIB
818 objects
This MIB module defines objects used for managing the Optics interface for Juniper products.
Imported Objects
| IF-MIB | ifDescr ifIndex |
| JUNIPER-SMI | jnxIlaNotifications jnxIplcNotifications jnxOpticsMibRoot jnxOpticsNotifications |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.71.1 | IdentityjnxIfOpticsMib | This MIB module defines objects used for managing the Optics interface for Juniper products. | ||
| 1.3.6.1.4.1.2636.3.71.1.1 | NodejnxOptics | |||
| 1.3.6.1.4.1.2636.3.71.1.1.1 | TablejnxOpticsConfigTable | not-accessible | current | Information about the optics config Table. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1 | RowjnxOpticsConfigEntry | not-accessible | current | A conceptual row that contains information about the optics config Table. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.1 | ColumnjnxOpticsConfigContainerIndex | not-accessible | current | The associated jnxContentsContainerIndex - eg shelf.. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.2 | ColumnjnxOpticsConfigL1Index | not-accessible | current | The level one index associated with this subject ... eg fpc slot. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.3 | ColumnjnxOpticsConfigL2Index | not-accessible | current | The level two index associated with this subject .. eg pic slot. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.4 | ColumnjnxOpticsConfigL3Index | not-accessible | current | The level three index associated with this subject.. eg port. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.5 | ColumnjnxOpticsType | read-only | current | 0 - none 1 - SFP 2 - XFP 3 - SFP+ 4 - XFP+ 5 - CFP 6 - CFP+ 7 - Non pluggable 8 - QSFP DWDM 9 - QSFP56DD |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.6 | ColumnjnxLaserEnable | read-write | current | 0 - laser off 1 - laser on |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.7 | ColumnjnxWavelength | read-write | current | The transmit wavelength of the laser. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.8 | ColumnjnxSpacing | read-only | current | A minimum nominal difference in frequency (GHz) between two adjacent channels. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.9 | ColumnjnxModulation | read-only | current | Modulation Unknown - (1), NonPSK - (2), ODB - (3), DPSK - (4), QPSK - (5), DQPSK - (6), DPQPSK - (7), 16QAM - (8), 64QAM - (9), 256QAM - (10) |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.10 | ColumnjnxTxOpticalPower | read-write | current | Transmit optical power. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.11 | ColumnjnxRxOpticalPower | read-only | current | Receive optical power. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.12 | ColumnjnxModuleTempHighThresh | read-only | current | High module temerature in degree fahrenheit for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per p… |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.13 | ColumnjnxModuleTempLowThresh | read-only | current | Low module temerature in degree fahrenheit for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per pe… |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.14 | ColumnjnxTxPowerHighThresh | read-write | current | Tx power for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.15 | ColumnjnxTxPowerLowThresh | read-write | current | Tx Power for a 15 minute period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.16 | ColumnjnxRxPowerHighThresh | read-write | current | Rx power for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.17 | ColumnjnxRxPowerLowThresh | read-write | current | Rx Power for a 15 minute period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.18 | Columnjnx24HourModuleTempHighThresh | read-only | current | High module temerature in degree fahrenheit for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per per… |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.19 | Columnjnx24HourModuleTempLowThresh | read-only | current | Low module temerature in degree fahrenheit for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per peri… |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.20 | Columnjnx24HourTxPowerHighThresh | read-write | current | Tx power for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.21 | Columnjnx24HourTxPowerLowThresh | read-write | current | Tx for a 24 hour period Power below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.22 | Columnjnx24HourRxPowerHighThresh | read-write | current | Rx power for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.23 | Columnjnx24HourRxPowerLowThresh | read-write | current | Rx Power for a 24 hour period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.24 | ColumnjnxRxLosPowerWarningThresh | read-write | current | Rx Power warning threshold for seeting the optical LOS warning. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.25 | ColumnjnxRxLosPowerAlarmThresh | read-write | current | Rx Power alarm threshold for seeting the optical LOS warning. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.26 | ColumnjnxOpticsCurrentStatus | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.27 | ColumnjnxTxPowerHighEnableTCA | read-write | current | Enable/Disable for the Tx Power High TCA. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.28 | ColumnjnxTxPowerLowEnableTCA | read-write | current | Enable/Disable for the Tx Power Low TCA. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.29 | ColumnjnxRxPowerHighEnableTCA | read-write | current | Enable/Disable for the Rx Power High TCA. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.30 | ColumnjnxRxPowerLowEnableTCA | read-write | current | Enable/Disable for the Rx Power Low TCA. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.31 | ColumnjnxModuleTempHighEnableTCA | read-write | current | Enable/Disable for the Module Temp High TCA. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.32 | ColumnjnxModuleTempLowEnableTCA | read-write | current | Enable/Disable for the Module Temp Low TCA. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.33 | ColumnjnxCarFreqOffsetHighEnableTCA | read-write | current | Enable/Disable for the Carrier Frequency Offset High TCA. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.34 | ColumnjnxCarFreqOffsetLowEnableTCA | read-write | current | Enable/Disable for the CarrierFreqOffetLow TCA's. |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.35 | ColumnjnxCarFreqOffsetHighThresh | read-write | current | Carrier frequency offset for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.36 | Columnjnx24HourCarFreqOffsetHighThresh | read-write | current | Carrier frequency offset for a 24 Hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.37 | ColumnjnxCarFreqOffsetLowThresh | read-write | current | Carrier frequency offset for a 15 minute period Low which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.1.1.1.38 | Columnjnx24HourCarFreqOffsetLowThresh | read-write | current | Carrier frequency offset for a 24 Hour period Low which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.1.2 | TablejnxOpticsTraceToneCfgTable | not-accessible | current | Information about the optics tests. |
| 1.3.6.1.4.1.2636.3.71.1.1.2.1 | RowjnxOpticsTraceToneCfgEntry | not-accessible | current | Information about the optics FRU's. |
| 1.3.6.1.4.1.2636.3.71.1.1.2.1.1 | ColumnjnxOpticsTraceToneCfgContainerIndex | not-accessible | current | The associated jnxContentsContainerIndex - eg shelf.. |
| 1.3.6.1.4.1.2636.3.71.1.1.2.1.2 | ColumnjnxOpticsTraceToneCfgL1Index | not-accessible | current | The level one index associated with this subject ... eg fpc slot. |
| 1.3.6.1.4.1.2636.3.71.1.1.2.1.3 | ColumnjnxOpticsTraceToneCfgL2Index | not-accessible | current | The level two index associated with this subject .. eg pic slot. |
| 1.3.6.1.4.1.2636.3.71.1.1.2.1.4 | ColumnjnxOpticsTraceToneCfgL3Index | not-accessible | current | The level three index associated with this subject.. eg port. |
| 1.3.6.1.4.1.2636.3.71.1.1.2.1.5 | ColumnjnxOpticsTraceToneCfgTxEnable | read-write | current | This will enable/disable the transmit Trace tone feature. |
| 1.3.6.1.4.1.2636.3.71.1.1.2.1.6 | ColumnjnxOpticsTraceToneCfgRxEnable | read-write | current | This will enable/disable the receive Trace tone feature. |
| 1.3.6.1.4.1.2636.3.71.1.1.2.1.7 | ColumnjnxOpticsTraceToneCfgDestId | read-write | current | This is the destination Id of the link ID/ the chassis and the blade. The transmit messages will also have the src id which is this chassis id and this port in… |
| 1.3.6.1.4.1.2636.3.71.1.1.2.1.8 | ColumnjnxOpticsTraceToneCfgTxMsg | read-write | current | This will be the transmit data in the tracetone message. |
| 1.3.6.1.4.1.2636.3.71.1.1.2.1.9 | ColumnjnxOpticsTraceToneCfgRxMsg | read-only | current | This will be the receive data in the trace tone message. |
| 1.3.6.1.4.1.2636.3.71.1.1.3 | ScalarjnxOpticsNotificationTrigDefaultHoldtimeUp | read-write | current | This object will indicate the time (ms) for the defect to persist before it is declared an alarm. |
| 1.3.6.1.4.1.2636.3.71.1.1.4 | ScalarjnxOpticsNotificationTrigDefaultHoldtimeDown | read-write | current | This object will indicate the time (ms) for the defect to absent before the alarm is cleared. |
| 1.3.6.1.4.1.2636.3.71.1.1.5 | TablejnxOpticsNotificationTrigTable | not-accessible | current | Information about the otn Alarm/Alart/Info trigger table. |
| 1.3.6.1.4.1.2636.3.71.1.1.5.1 | RowjnxOpticsNotificationTrigEntry | not-accessible | current | A conceptual row that contains information about the Otn Alarm Trigger Table. |
| 1.3.6.1.4.1.2636.3.71.1.1.5.1.1 | ColumnjnxOpticsNotificationTrigContainerIndex | not-accessible | current | The associated jnxContentsContainerIndex - eg shelf. |
| 1.3.6.1.4.1.2636.3.71.1.1.5.1.2 | ColumnjnxOpticsNotificationTrigL1Index | not-accessible | current | The level one index associated with this subject ... eg fpc slot. |
| 1.3.6.1.4.1.2636.3.71.1.1.5.1.3 | ColumnjnxOpticsNotificationTrigL2Index | not-accessible | current | The level two index associated with this subject .. eg pic slot. |
| 1.3.6.1.4.1.2636.3.71.1.1.5.1.4 | ColumnjnxOpticsNotificationTrigL3Index | not-accessible | current | The level three index associated with this subject.. eg port. |
| 1.3.6.1.4.1.2636.3.71.1.1.5.1.5 | ColumnjnxOpticsNotificationTrigAlmId | not-accessible | current | This will be the type of Alarm as defined by JnxOpticsNotificationId |
| 1.3.6.1.4.1.2636.3.71.1.1.5.1.6 | ColumnjnxOpticsNotificationTrigSeverity | read-write | current | This will be the Severity of the Notification. |
| 1.3.6.1.4.1.2636.3.71.1.1.5.1.7 | ColumnjnxOpticsNotificationTrigIgnore | read-write | current | This object will ignore the alarm when set. |
| 1.3.6.1.4.1.2636.3.71.1.1.5.1.8 | ColumnjnxOpticsNotificationTrigHoldtimeUp | read-write | current | This object will indicate the time (ms) for the defect to persist before it is declared an alarm. |
| 1.3.6.1.4.1.2636.3.71.1.1.5.1.9 | ColumnjnxOpticsNotificationTrigHoldtimeDown | read-write | current | This object will indicate the time (ms) the defect is absent before the alarm is cleared. |
| 1.3.6.1.4.1.2636.3.71.1.1.5.1.10 | ColumnjnxOpticsTrigServiceStateAction | read-only | current | This will indicate whether this alarm is service affecting or not . |
| 1.3.6.1.4.1.2636.3.71.1.1.6 | ScalarjnxOpticsClearAllPMs | read-write | current | To clear all optics Performance monitoring counters on all interfaces. |
| 1.3.6.1.4.1.2636.3.71.1.1.7 | TablejnxOpticsClearIfPMsTable | not-accessible | current | To clear optics Performance monitoring counters on this interfaces |
| 1.3.6.1.4.1.2636.3.71.1.1.7.1 | RowjnxOpticsClearIfPMsEntry | not-accessible | current | A conceptual row that s used to clear the Optics PM Table. |
| 1.3.6.1.4.1.2636.3.71.1.1.7.1.1 | ColumnjnxOpticsClearCurrent | read-write | current | 1- to clear all the Current Optics PM's for this interface |
| 1.3.6.1.4.1.2636.3.71.1.1.7.1.2 | ColumnjnxOpticsClearInterfaceInterval | read-write | current | 1- to clear all the Optics PM's intervals(1-96) for this interface |
| 1.3.6.1.4.1.2636.3.71.1.1.7.1.3 | ColumnjnxOpticsClearInterfaceDay | read-write | current | 1 - to clear all the Current Day and Previous Day Optics PM's for this interface |
| 1.3.6.1.4.1.2636.3.71.1.1.7.1.4 | ColumnjnxOpticsClearInterfaceAll | read-write | current | 1 - to clear all the Optics PM's for this interface |
| 1.3.6.1.4.1.2636.3.71.1.1.8 | TablejnxOpticsOTIfConfigTable | not-accessible | current | Information about the OT interface optics config Table. |
| 1.3.6.1.4.1.2636.3.71.1.1.8.1 | RowjnxOpticsOTIfConfigEntry | not-accessible | current | A conceptual row that contains information about the OT interface optics config Table. |
| 1.3.6.1.4.1.2636.3.71.1.1.8.1.1 | ColumnjnxOpticsOTIfConfigContainerIndex | not-accessible | current | The associated jnxContentsContainerIndex - eg shelf.. |
| 1.3.6.1.4.1.2636.3.71.1.1.8.1.2 | ColumnjnxOpticsOTIfConfigL1Index | not-accessible | current | The level one index associated with this subject ... eg fpc slot. |
| 1.3.6.1.4.1.2636.3.71.1.1.8.1.3 | ColumnjnxOpticsOTIfConfigL2Index | not-accessible | current | The level two index associated with this subject .. eg pic slot. |
| 1.3.6.1.4.1.2636.3.71.1.1.8.1.4 | ColumnjnxOpticsOTIfConfigL3Index | not-accessible | current | The level three index associated with this subject.. eg port. |
| 1.3.6.1.4.1.2636.3.71.1.1.8.1.5 | ColumnjnxOpticsOTIfLaserEnable | read-write | current | 0 - laser off 1 - laser on |
| 1.3.6.1.4.1.2636.3.71.1.1.8.1.6 | ColumnjnxOpticsOTIfFecMode | read-write | current | This parameter indicates what FEC type in the OTU frame |
| 1.3.6.1.4.1.2636.3.71.1.1.8.1.7 | ColumnjnxOpticsOTIfEncodingOption | read-write | current | Encoding option selected |
| 1.3.6.1.4.1.2636.3.71.1.1.8.1.8 | ColumnjnxOpticsOTIfModulation | read-write | current | Modulation formats supported on the platform Unknown - (0), 16QAM - (1), 8QAM - (2), QPSK - (3) |
| 1.3.6.1.4.1.2636.3.71.1.1.8.1.9 | ColumnjnxOpticsOTIfAdminState | read-write | current | The Admin state of this interface |
| 1.3.6.1.4.1.2636.3.71.1.1.8.1.10 | ColumnjnxOpticsOTIfOperState | read-only | current | The operational state of this interface |
| 1.3.6.1.4.1.2636.3.71.1.1.8.1.11 | ColumnjnxOpticsOTIfHighPolarization | read-write | current | Enable/disable high-polarization mode. |
| 1.3.6.1.4.1.2636.3.71.1.1.8.1.12 | ColumnjnxOpticsOTIfPreFecBERThresholdMantissa | read-write | current | This will set the BER threshold(mantissa), which when crossed will trigger Signal Degrade. |
| 1.3.6.1.4.1.2636.3.71.1.1.8.1.13 | ColumnjnxOpticsOTIfPreFecBERThresholdExponent | read-write | current | This will set the BER threshold(exponent), which when crossed will trigger Signal Degrade. |
| 1.3.6.1.4.1.2636.3.71.1.1.8.1.14 | ColumnjnxOpticsOTIfPreFecBERThresholdTime | read-write | current | Specify the interval for which the BER must stay above the signal degradation threshold or below the clear threshold for the alarm to be raised or cleared resp… |
| 1.3.6.1.4.1.2636.3.71.1.1.8.1.15 | ColumnjnxOpticsOTIfPreFecBERThresholdClearMantissa | read-write | current | This will set the BER threshold(mantissa) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below … |
| 1.3.6.1.4.1.2636.3.71.1.1.8.1.16 | ColumnjnxOpticsOTIfPreFecBERThresholdClearExponent | read-write | current | This will set the BER threshold(exponent) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below … |
| 1.3.6.1.4.1.2636.3.71.1.2 | NodejnxOpticsPerformanceMonitoring | |||
| 1.3.6.1.4.1.2636.3.71.1.2.1 | TablejnxOpticsPMCurrentTable | not-accessible | current | A table of current PM entries for coherent optics. |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1 | RowjnxOpticsPMCurrentEntry | not-accessible | current | A conceptual row that contains information about the PM Current Table. |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.1 | ColumnjnxPMCurChromaticDispersion | read-only | current | Chromatic Dispersion measured at Rx Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.2 | ColumnjnxPMCurDiffGroupDelay | read-only | current | Differential group delay |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.3 | ColumnjnxPMCurPolarizationState | read-only | current | Polarization state |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.4 | ColumnjnxPMCurPolarDepLoss | read-only | current | The polarisation dependent loss (PDL) is the difference (in dB) between the maximum and minimum values of the channel insertion loss (or gain) of the black-lin… |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.5 | ColumnjnxPMCurQ | read-only | current | 'Q' factor estimated at Rx Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.6 | ColumnjnxPMCurSNR | read-only | current | SNR - signal to noise ratio |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.7 | ColumnjnxPMCurTxOutputPower | read-only | current | TxOutputPower - transmit output power |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.8 | ColumnjnxPMCurRxInputPower | read-only | current | RxInputPower - receive output power |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.9 | ColumnjnxPMCurMinChromaticDispersion | read-only | current | Min Chromatic Dispersion measured at Rx Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.10 | ColumnjnxPMCurMaxChromaticDispersion | read-only | current | Max Chromatic Dispersion measured at Rx Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.11 | ColumnjnxPMCurAvgChromaticDispersion | read-only | current | Average Chromatic Dispersion measured at Rx Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.12 | ColumnjnxPMCurMinDiffGroupDelay | read-only | current | Min Differential group delay |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.13 | ColumnjnxPMCurMaxDiffGroupDelay | read-only | current | Max Differential group delay |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.14 | ColumnjnxPMCurAvgDiffGroupDelay | read-only | current | Average Differential group delay |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.15 | ColumnjnxPMCurMinPolarState | read-only | current | Min Polarization state |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.16 | ColumnjnxPMCurMaxPolarState | read-only | current | Max Polarization state |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.17 | ColumnjnxPMCurAvgPolarState | read-only | current | Avg Polarization state |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.18 | ColumnjnxPMCurMinPolarDepLoss | read-only | current | Min - The polarisation dependent loss (PDL) |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.19 | ColumnjnxPMCurMaxPolarDepLoss | read-only | current | Max - The polarisation dependent loss (PDL) |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.20 | ColumnjnxPMCurAvgPolarDepLoss | read-only | current | Avg - The polarisation dependent loss (PDL) |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.21 | ColumnjnxPMCurMinQ | read-only | current | Min 'Q' factor estimated at Rx Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.22 | ColumnjnxPMCurMaxQ | read-only | current | Max 'Q' factor estimated at Rx Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.23 | ColumnjnxPMCurAvgQ | read-only | current | Avg 'Q' factor estimated at Rx Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.24 | ColumnjnxPMCurMinSNR | read-only | current | Min SNR - signal to noise ratio |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.25 | ColumnjnxPMCurMaxSNR | read-only | current | Max SNR - signal to noise ratio |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.26 | ColumnjnxPMCurAvgSNR | read-only | current | Avg SNR - signal to noise ratio |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.27 | ColumnjnxPMCurMinTxOutputPower | read-only | current | Min TxOutputPower - transmit output power |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.28 | ColumnjnxPMCurMaxTxOutputPower | read-only | current | Max TxOutputPower - transmit output power |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.29 | ColumnjnxPMCurAvgTxOutputPower | read-only | current | Avg TxOutputPower - transmit output power |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.30 | ColumnjnxPMCurMinRxInputPower | read-only | current | Min RxInputPower - receive output power |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.31 | ColumnjnxPMCurMaxRxInputPower | read-only | current | Max RxInputPower - receive output power |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.32 | ColumnjnxPMCurAvgRxInputPower | read-only | current | Avg RxInputPower - receive output power |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.33 | ColumnjnxPMCurSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.34 | ColumnjnxPMCurSuspectReason | read-only | current | If jnxPMCurSuspectedFlag is true, provides the reason. |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.35 | ColumnjnxPMCurTxLaserBiasCurrent | read-only | current | Trasmit LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.36 | ColumnjnxPMCurMinTxLaserBiasCurrent | read-only | current | Minimum trasmit LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.37 | ColumnjnxPMCurMaxTxLaserBiasCurrent | read-only | current | Maximum trasmit LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.38 | ColumnjnxPMCurAvgTxLaserBiasCurrent | read-only | current | Average LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.39 | ColumnjnxPMCurTemperature | read-only | current | Module Temperature |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.40 | ColumnjnxPMCurMinTemperature | read-only | current | Minimum Module Temperature |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.41 | ColumnjnxPMCurMaxTemperature | read-only | current | Maximum Module Temperature |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.42 | ColumnjnxPMCurAvgTemperature | read-only | current | Average Module Temperature |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.43 | ColumnjnxPMCurCarFreqOffset | read-only | current | Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.44 | ColumnjnxPMCurMinCarFreqOffset | read-only | current | Minimum Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.45 | ColumnjnxPMCurMaxCarFreqOffset | read-only | current | Maximum Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.46 | ColumnjnxPMCurAvgCarFreqOffset | read-only | current | Average Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.47 | ColumnjnxPMCurRxLaserBiasCurrent | read-only | current | Received LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.48 | ColumnjnxPMCurMinRxLaserBiasCurrent | read-only | current | Received Minimum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.49 | ColumnjnxPMCurMaxRxLaserBiasCurrent | read-only | current | Received Maximum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.50 | ColumnjnxPMCurAvgRxLaserBiasCurrent | read-only | current | Received Average LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.51 | ColumnjnxPMCurTecCurrent | read-only | current | Received TecCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.52 | ColumnjnxPMCurMinTecCurrent | read-only | current | Received Minimum TecCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.53 | ColumnjnxPMCurMaxTecCurrent | read-only | current | Received Maximum TecCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.54 | ColumnjnxPMCurAvgTecCurrent | read-only | current | Received Average TecCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.55 | ColumnjnxPMCurResidualDispersion | read-only | current | Residual Dispersion measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.56 | ColumnjnxPMCurMinResidualDispersion | read-only | current | Minimum Residual Dispersion measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.57 | ColumnjnxPMCurMaxResidualDispersion | read-only | current | Maximum Residual Dispersion measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.58 | ColumnjnxPMCurAvgResidualDispersion | read-only | current | Average Residual Dispersion measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.59 | ColumnjnxPMCurLevelHistogram | read-only | current | The rate of measured signal at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.60 | ColumnjnxPMCurMinLevelHistogram | read-only | current | The Minimum rate of measured signal at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.61 | ColumnjnxPMCurMaxLevelHistogram | read-only | current | The Maximum rate of measured signal at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.62 | ColumnjnxPMCurAvgLevelHistogram | read-only | current | The Average rate of measured signal at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.63 | ColumnjnxPMCurLaserFrequencyError | read-only | current | Laser Frequency Error measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.64 | ColumnjnxPMCurMinLaserFrequencyError | read-only | current | Minimum Laser Frequency Error measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.65 | ColumnjnxPMCurMaxLaserFrequencyError | read-only | current | Maximum Laser Frequency Error measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.66 | ColumnjnxPMCurAvgLaserFrequencyError | read-only | current | Average Laser Frequency Error measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.67 | ColumnjnxPMCurFECCorrectedErrorsMantissa | read-only | current | Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.68 | ColumnjnxPMCurFECCorrectedErrorsExponent | read-only | current | Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.69 | ColumnjnxPMCurMinFECCorrectedErrorsMantissa | read-only | current | Minimum Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.70 | ColumnjnxPMCurMinFECCorrectedErrorsExponent | read-only | current | Minimum Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.71 | ColumnjnxPMCurMaxFECCorrectedErrorsMantissa | read-only | current | Maximum Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.72 | ColumnjnxPMCurMaxFECCorrectedErrorsExponent | read-only | current | Maximum Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.73 | ColumnjnxPMCurAvgFECCorrectedErrorsMantissa | read-only | current | Average Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.74 | ColumnjnxPMCurAvgFECCorrectedErrorsExponent | read-only | current | Average Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.75 | ColumnjnxPMCurFECUCorrectedWordsMantissa | read-only | current | Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.76 | ColumnjnxPMCurFECUCorrectedWordsExponent | read-only | current | Uncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.77 | ColumnjnxPMCurMinFECUCorrectedWordsMantissa | read-only | current | Minimum Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.78 | ColumnjnxPMCurMinFECUCorrectedWordsExponent | read-only | current | Minimum Uncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.79 | ColumnjnxPMCurMaxFECUCorrectedWordsMantissa | read-only | current | Maximum Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.80 | ColumnjnxPMCurMaxFECUCorrectedWordsExponent | read-only | current | Maximum Uncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.81 | ColumnjnxPMCurAvgFECUCorrectedWordsMantissa | read-only | current | Average Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.82 | ColumnjnxPMCurAvgFECUCorrectedWordsExponent | read-only | current | Average Uncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.83 | ColumnjnxPMCurRxSignalPower | read-only | current | RxSignalPower - receive signal power |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.84 | ColumnjnxPMCurMinRxSignalPower | read-only | current | Min RxSignalPower - receive signal power |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.85 | ColumnjnxPMCurMaxRxSignalPower | read-only | current | Max RxSignalPower - receive signal power |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.86 | ColumnjnxPMCurAvgRxSignalPower | read-only | current | Avg RxSignalPower - receive signal power |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.87 | ColumnjnxPMCurOSNR | read-only | current | OSNR - optical signal to noise ratio |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.88 | ColumnjnxPMCurMinOSNR | read-only | current | Min OSNR - optical signal to noise ratio |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.89 | ColumnjnxPMCurMaxOSNR | read-only | current | Max OSNR - optical signal to noise ratio |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.90 | ColumnjnxPMCurAvgOSNR | read-only | current | Avg OSNR - optical signal to noise ratio |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.91 | ColumnjnxPMCurSOPMD | read-only | current | SOPMD - second-order polarization mode dispersion |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.92 | ColumnjnxPMCurMinSOPMD | read-only | current | Min SOPMD - second-order polarization mode dispersion |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.93 | ColumnjnxPMCurMaxSOPMD | read-only | current | Max SOPMD - second-order polarization mode dispersion |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.94 | ColumnjnxPMCurAvgSOPMD | read-only | current | Avg SOPMD - second-order polarization mode dispersion |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.95 | ColumnjnxPMCurSupplyVoltage | read-only | current | Supply Voltage |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.96 | ColumnjnxPMCurMinSupplyVoltage | read-only | current | Minimum Supply Voltage |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.97 | ColumnjnxPMCurMaxSupplyVoltage | read-only | current | Maximum Supply Voltage |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.98 | ColumnjnxPMCurAvgSupplyVoltage | read-only | current | Average Supply Voltage |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.99 | ColumnjnxPMCurSOPROC | read-only | current | SOPROC - State of Polarisation Rate of Change |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.100 | ColumnjnxPMCurMinSOPROC | read-only | current | Minimum SOPROC - State of Polarisation Rate of Change |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.101 | ColumnjnxPMCurMaxSOPROC | read-only | current | Maximum SOPROC - State of Polarisation Rate of Change |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.102 | ColumnjnxPMCurAvgSOPROC | read-only | current | Average SOPROC - State of Polarisation Rate of Change |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.103 | ColumnjnxPMCurModulatorBiasXI | read-only | current | Modulator Bias XI |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.104 | ColumnjnxPMCurMinModulatorBiasXI | read-only | current | Minimum Modulator Bias XI |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.105 | ColumnjnxPMCurMaxModulatorBiasXI | read-only | current | Maximum Modulator Bias XI |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.106 | ColumnjnxPMCurAvgModulatorBiasXI | read-only | current | Average Modulator Bias XI |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.107 | ColumnjnxPMCurModulatorBiasXQ | read-only | current | Modulator Bias XQ |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.108 | ColumnjnxPMCurMinModulatorBiasXQ | read-only | current | Minimum Modulator Bias XQ |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.109 | ColumnjnxPMCurMaxModulatorBiasXQ | read-only | current | Maximum Modulator Bias XQ |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.110 | ColumnjnxPMCurAvgModulatorBiasXQ | read-only | current | Average Modulator Bias XQ |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.111 | ColumnjnxPMCurModulatorBiasYI | read-only | current | Modulator Bias YI |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.112 | ColumnjnxPMCurMinModulatorBiasYI | read-only | current | Minimum Modulator Bias YI |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.113 | ColumnjnxPMCurMaxModulatorBiasYI | read-only | current | Maximum Modulator Bias YI |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.114 | ColumnjnxPMCurAvgModulatorBiasYI | read-only | current | Average Modulator Bias YI |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.115 | ColumnjnxPMCurModulatorBiasYQ | read-only | current | Modulator Bias YQ |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.116 | ColumnjnxPMCurMinModulatorBiasYQ | read-only | current | Minimum Modulator Bias YQ |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.117 | ColumnjnxPMCurMaxModulatorBiasYQ | read-only | current | Maximum Modulator Bias YQ |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.118 | ColumnjnxPMCurAvgModulatorBiasYQ | read-only | current | Average Modulator Bias YQ |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.119 | ColumnjnxPMCurModulatorBiasXPhase | read-only | current | Modulator Bias XPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.120 | ColumnjnxPMCurMinModulatorBiasXPhase | read-only | current | Minimum Modulator Bias XPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.121 | ColumnjnxPMCurMaxModulatorBiasXPhase | read-only | current | Maximum Modulator Bias XPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.122 | ColumnjnxPMCurAvgModulatorBiasXPhase | read-only | current | Average Modulator Bias XPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.123 | ColumnjnxPMCurModulatorBiasYPhase | read-only | current | Modulator Bias YPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.124 | ColumnjnxPMCurMinModulatorBiasYPhase | read-only | current | Minimum Modulator Bias YPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.125 | ColumnjnxPMCurMaxModulatorBiasYPhase | read-only | current | Maximum Modulator Bias YPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.126 | ColumnjnxPMCurAvgModulatorBiasYPhase | read-only | current | Average Modulator Bias YPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.127 | ColumnjnxPMCurQMargin | read-only | current | Q Margin |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.128 | ColumnjnxPMCurMinQMargin | read-only | current | Minimum Q Margin |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.129 | ColumnjnxPMCurMaxQMargin | read-only | current | Maximum Q Margin |
| 1.3.6.1.4.1.2636.3.71.1.2.1.1.130 | ColumnjnxPMCurAvgQMargin | read-only | current | Average Q Margin |
| 1.3.6.1.4.1.2636.3.71.1.2.2 | TablejnxOpticsPMIntervalTable | not-accessible | current | A table of interval PM entries for coherent optics. |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1 | RowjnxOpticsPMIntervalEntry | not-accessible | current | A conceptual row that contains information about the PM Interval Table. |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.1 | ColumnjnxOpticsPMIntervalNumber | not-accessible | current | This is the 15 mintute interval number. |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.2 | ColumnjnxPMIntMinChromaticDispersion | read-only | current | Chromatic Dispersion measured at Rx Transceiver port - min in the 15 minute interval |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.3 | ColumnjnxPMIntMaxChromaticDispersion | read-only | current | Chromatic Dispersion measured at Rx Transceiver port - max in the 15 minute interval |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.4 | ColumnjnxPMIntAvgChromaticDispersion | read-only | current | Chromatic Dispersion measured at Rx Transceiver port - average in the 15 minute interval |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.5 | ColumnjnxPMIntMinDiffGroupDelay | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.6 | ColumnjnxPMIntMaxDiffGroupDelay | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.7 | ColumnjnxPMIntAvgDiffGroupDelay | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.8 | ColumnjnxPMIntMinPolarState | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.9 | ColumnjnxPMIntMaxPolarState | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.10 | ColumnjnxPMIntAvgPolarState | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.11 | ColumnjnxPMIntMinPolarDependentLoss | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.12 | ColumnjnxPMIntMaxPolarDependentLoss | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.13 | ColumnjnxPMIntAvgPolarDependentLoss | read-only | current | Polarization Dependent Loss interval |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.14 | ColumnjnxPMIntMinQ | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.15 | ColumnjnxPMIntMaxQ | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.16 | ColumnjnxPMIntAvgQ | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.17 | ColumnjnxPMIntMinSNR | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.18 | ColumnjnxPMIntMaxSNR | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.19 | ColumnjnxPMIntAvgSNR | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.20 | ColumnjnxPMIntMinTxOutputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.21 | ColumnjnxPMIntMaxTxOutputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.22 | ColumnjnxPMIntAvgTxOutputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.23 | ColumnjnxPMIntMinRxInputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.24 | ColumnjnxPMIntMaxRxInputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.25 | ColumnjnxPMIntAvgRxInputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.26 | ColumnjnxPMIntTimeStamp | read-only | current | Time stamp PM interval |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.27 | ColumnjnxPMIntSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.28 | ColumnjnxPMIntSuspectReason | read-only | current | If jnxPMIntSuspectedFlag is true, provides the reason. |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.29 | ColumnjnxPMIntMinTxLaserBiasCurrent | read-only | current | Transmit Minimum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.30 | ColumnjnxPMIntMaxTxLaserBiasCurrent | read-only | current | Transmit Maximum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.31 | ColumnjnxPMIntAvgTxLaserBiasCurrent | read-only | current | Transmit Average LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.32 | ColumnjnxPMIntMinTemperature | read-only | current | Minimum Module Temperature |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.33 | ColumnjnxPMIntMaxTemperature | read-only | current | Maximum Module Temperature |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.34 | ColumnjnxPMIntAvgTemperature | read-only | current | Average Module Temperature |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.35 | ColumnjnxPMIntMinCarFreqOffset | read-only | current | Minimum Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.36 | ColumnjnxPMIntMaxCarFreqOffset | read-only | current | Maximum Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.37 | ColumnjnxPMIntAvgCarFreqOffset | read-only | current | Average Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.38 | ColumnjnxPMIntMinRxLaserBiasCurrent | read-only | current | Receive Minimum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.39 | ColumnjnxPMIntMaxRxLaserBiasCurrent | read-only | current | Receive Maximum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.40 | ColumnjnxPMIntAvgRxLaserBiasCurrent | read-only | current | Receive Average LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.41 | ColumnjnxPMIntMinTecCurrent | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.42 | ColumnjnxPMIntMaxTecCurrent | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.43 | ColumnjnxPMIntAvgTecCurrent | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.44 | ColumnjnxPMIntMinResidualDispersion | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.45 | ColumnjnxPMIntMaxResidualDispersion | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.46 | ColumnjnxPMIntAvgResidualDispersion | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.47 | ColumnjnxPMIntMinLevelHistogram | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.48 | ColumnjnxPMIntMaxLevelHistogram | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.49 | ColumnjnxPMIntAvgLevelHistogram | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.50 | ColumnjnxPMIntMinLaserFrequencyError | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.51 | ColumnjnxPMIntMaxLaserFrequencyError | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.52 | ColumnjnxPMIntAvgLaserFrequencyError | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.53 | ColumnjnxPMIntMinFECCorrectedErrorsMantissa | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.54 | ColumnjnxPMIntMinFECCorrectedErrorsExponent | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.55 | ColumnjnxPMIntMaxFECCorrectedErrorsMantissa | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.56 | ColumnjnxPMIntMaxFECCorrectedErrorsExponent | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.57 | ColumnjnxPMIntAvgFECCorrectedErrorsMantissa | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.58 | ColumnjnxPMIntAvgFECCorrectedErrorsExponent | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.59 | ColumnjnxPMIntMinFECUCorrectedWordsMantissa | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.60 | ColumnjnxPMIntMinFECUCorrectedWordsExponent | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.61 | ColumnjnxPMIntMaxFECUCorrectedWordsMantissa | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.62 | ColumnjnxPMIntMaxFECUCorrectedWordsExponent | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.63 | ColumnjnxPMIntAvgFECUCorrectedWordsMantissa | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.64 | ColumnjnxPMIntAvgFECUCorrectedWordsExponent | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.65 | ColumnjnxPMIntMinRxSignalPower | read-only | current | Min RxSignalPower - receive signal power |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.66 | ColumnjnxPMIntMaxRxSignalPower | read-only | current | Max RxSignalPower - receive signal power |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.67 | ColumnjnxPMIntAvgRxSignalPower | read-only | current | Avg RxSignalPower - receive signal power |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.68 | ColumnjnxPMIntMinOSNR | read-only | current | Min OSNR - optical signal to noise ratio |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.69 | ColumnjnxPMIntMaxOSNR | read-only | current | Max OSNR - optical signal to noise ratio |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.70 | ColumnjnxPMIntAvgOSNR | read-only | current | Avg OSNR - optical signal to noise ratio |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.71 | ColumnjnxPMIntMinSOPMD | read-only | current | Min SOPMD - second-order polarization mode dispersion |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.72 | ColumnjnxPMIntMaxSOPMD | read-only | current | Max SOPMD - second-order polarization mode dispersion |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.73 | ColumnjnxPMIntAvgSOPMD | read-only | current | Avg SOPMD - second-order polarization mode dispersion |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.74 | ColumnjnxPMIntMinSupplyVoltage | read-only | current | Minimum Supply Voltage |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.75 | ColumnjnxPMIntMaxSupplyVoltage | read-only | current | Maximum Supply Voltage |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.76 | ColumnjnxPMIntAvgSupplyVoltage | read-only | current | Average Supply Voltage |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.77 | ColumnjnxPMIntMinSOPROC | read-only | current | Minimum SOPROC - State of Polarisation Rate of Change |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.78 | ColumnjnxPMIntMaxSOPROC | read-only | current | Maximum SOPROC - State of Polarisation Rate of Change |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.79 | ColumnjnxPMIntAvgSOPROC | read-only | current | Average SOPROC - State of Polarisation Rate of Change |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.80 | ColumnjnxPMIntMinModulatorBiasXI | read-only | current | Minimum Modulator Bias XI |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.81 | ColumnjnxPMIntMaxModulatorBiasXI | read-only | current | Maximum Modulator Bias XI |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.82 | ColumnjnxPMIntAvgModulatorBiasXI | read-only | current | Average Modulator Bias XI |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.83 | ColumnjnxPMIntMinModulatorBiasXQ | read-only | current | Minimum Modulator Bias XQ |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.84 | ColumnjnxPMIntMaxModulatorBiasXQ | read-only | current | Maximum Modulator Bias XQ |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.85 | ColumnjnxPMIntAvgModulatorBiasXQ | read-only | current | Average Modulator Bias XQ |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.86 | ColumnjnxPMIntMinModulatorBiasYI | read-only | current | Minimum Modulator Bias YI |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.87 | ColumnjnxPMIntMaxModulatorBiasYI | read-only | current | Maximum Modulator Bias YI |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.88 | ColumnjnxPMIntAvgModulatorBiasYI | read-only | current | Average Modulator Bias YI |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.89 | ColumnjnxPMIntMinModulatorBiasYQ | read-only | current | Minimum Modulator Bias YQ |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.90 | ColumnjnxPMIntMaxModulatorBiasYQ | read-only | current | Maximum Modulator Bias YQ |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.91 | ColumnjnxPMIntAvgModulatorBiasYQ | read-only | current | Average Modulator Bias YQ |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.92 | ColumnjnxPMIntMinModulatorBiasXPhase | read-only | current | Minimum Modulator Bias XPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.93 | ColumnjnxPMIntMaxModulatorBiasXPhase | read-only | current | Maximum Modulator Bias XPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.94 | ColumnjnxPMIntAvgModulatorBiasXPhase | read-only | current | Average Modulator Bias XPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.95 | ColumnjnxPMIntMinModulatorBiasYPhase | read-only | current | Minimum Modulator Bias YPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.96 | ColumnjnxPMIntMaxModulatorBiasYPhase | read-only | current | Maximum Modulator Bias YPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.97 | ColumnjnxPMIntAvgModulatorBiasYPhase | read-only | current | Average Modulator Bias YPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.98 | ColumnjnxPMIntMinQMargin | read-only | current | Minimum Q Margin |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.99 | ColumnjnxPMIntMaxQMargin | read-only | current | Maximum Q Margin |
| 1.3.6.1.4.1.2636.3.71.1.2.2.1.100 | ColumnjnxPMIntAvgQMargin | read-only | current | Average Q Margin |
| 1.3.6.1.4.1.2636.3.71.1.2.3 | TablejnxOpticsPMDayTable | not-accessible | current | A table of 24 hour interval PM entries for coherent optics. |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1 | RowjnxOpticsPMDayEntry | not-accessible | current | A conceptual row that contains information about the PM Day Table |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.1 | ColumnjnxOpticsPMDayIndex | not-accessible | current | This is 1 - cur day/ 2 - prev day |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.2 | ColumnjnxPMDayMinChromaticDispersion | read-only | current | Chromatic Dispersion measured at Rx Transceiver port - min in the day |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.3 | ColumnjnxPMDayMaxChromaticDispersion | read-only | current | Chromatic Dispersion measured at Rx Transceiver port - max in the day |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.4 | ColumnjnxPMDayAvgChromaticDispersion | read-only | current | Chromatic Dispersion measured at Rx Transceiver port - average in the day |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.5 | ColumnjnxPMDayMinDiffGroupDelay | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.6 | ColumnjnxPMDayMaxDiffGroupDelay | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.7 | ColumnjnxPMDayAvgDiffGroupDelay | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.8 | ColumnjnxPMDayMinPolarState | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.9 | ColumnjnxPMDayMaxPolarState | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.10 | ColumnjnxPMDayAvgPolarState | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.11 | ColumnjnxPMDayMinPolarDependentLoss | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.12 | ColumnjnxPMDayMaxPolarDependentLoss | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.13 | ColumnjnxPMDayAvgPolarDependentLoss | read-only | current | Polarization Dependent Loss interval |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.14 | ColumnjnxPMDayMinQ | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.15 | ColumnjnxPMDayMaxQ | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.16 | ColumnjnxPMDayAvgQ | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.17 | ColumnjnxPMDayMinSNR | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.18 | ColumnjnxPMDayMaxSNR | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.19 | ColumnjnxPMDayAvgSNR | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.20 | ColumnjnxPMDayMinTxOutputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.21 | ColumnjnxPMDayMaxTxOutputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.22 | ColumnjnxPMDayAvgTxOutputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.23 | ColumnjnxPMDayMinRxInputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.24 | ColumnjnxPMDayMaxRxInputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.25 | ColumnjnxPMDayAvgRxInputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.26 | ColumnjnxPMDayTimeStamp | read-only | current | Time for the Day. |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.27 | ColumnjnxPMDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.28 | ColumnjnxPMDaySuspectReason | read-only | current | If jnxPMDaySuspectedFlag is true, provides the reason. |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.29 | ColumnjnxPMDayMinTxLaserBiasCurrent | read-only | current | Transmit LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.30 | ColumnjnxPMDayMaxTxLaserBiasCurrent | read-only | current | Transmit Minimum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.31 | ColumnjnxPMDayAvgTxLaserBiasCurrent | read-only | current | Transmit Maximum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.32 | ColumnjnxPMDayMinTemperature | read-only | current | Minimum Module Temperature |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.33 | ColumnjnxPMDayMaxTemperature | read-only | current | Maximum Module Temperature |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.34 | ColumnjnxPMDayAvgTemperature | read-only | current | Average Module Temperature |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.35 | ColumnjnxPMDayMinCarFreqOffset | read-only | current | Minimum Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.36 | ColumnjnxPMDayMaxCarFreqOffset | read-only | current | Maximum Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.37 | ColumnjnxPMDayAvgCarFreqOffset | read-only | current | Average Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.38 | ColumnjnxPMDayMinRxLaserBiasCurrent | read-only | current | Receive LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.39 | ColumnjnxPMDayMaxRxLaserBiasCurrent | read-only | current | Receive Minimum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.40 | ColumnjnxPMDayAvgRxLaserBiasCurrent | read-only | current | Receive Maximum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.41 | ColumnjnxPMDayMinTecCurrent | read-only | current | Received Minimum TecCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.42 | ColumnjnxPMDayMaxTecCurrent | read-only | current | Received Maximum TecCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.43 | ColumnjnxPMDayAvgTecCurrent | read-only | current | Received Average TecCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.44 | ColumnjnxPMDayMinResidualDispersion | read-only | current | Minimum Residual Dispersion measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.45 | ColumnjnxPMDayMaxResidualDispersion | read-only | current | Maximum Residual Dispersion measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.46 | ColumnjnxPMDayAvgResidualDispersion | read-only | current | Average Residual Dispersion measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.47 | ColumnjnxPMDayMinLevelHistogram | read-only | current | The Minimum rate of measured signal at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.48 | ColumnjnxPMDayMaxLevelHistogram | read-only | current | The Maximum rate of measured signal at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.49 | ColumnjnxPMDayAvgLevelHistogram | read-only | current | The Average rate of measured signal at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.50 | ColumnjnxPMDayMinLaserFrequencyError | read-only | current | Minimum Laser Frequency Error measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.51 | ColumnjnxPMDayMaxLaserFrequencyError | read-only | current | Maximum Laser Frequency Error measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.52 | ColumnjnxPMDayAvgLaserFrequencyError | read-only | current | Average Laser Frequency Error measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.53 | ColumnjnxPMDayMinFECCorrectedErrorsMantissa | read-only | current | Minimum Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.54 | ColumnjnxPMDayMinFECCorrectedErrorsExponent | read-only | current | Minimum Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.55 | ColumnjnxPMDayMaxFECCorrectedErrorsMantissa | read-only | current | Maximum Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.56 | ColumnjnxPMDayMaxFECCorrectedErrorsExponent | read-only | current | Maximum Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.57 | ColumnjnxPMDayAvgFECCorrectedErrorsMantissa | read-only | current | Average Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.58 | ColumnjnxPMDayAvgFECCorrectedErrorsExponent | read-only | current | Average Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.59 | ColumnjnxPMDayMinFECUCorrectedWordsMantissa | read-only | current | Minimum Uncorrected BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.60 | ColumnjnxPMDayMinFECUCorrectedWordsExponent | read-only | current | Minimum Uncorrected BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.61 | ColumnjnxPMDayMaxFECUCorrectedWordsMantissa | read-only | current | Maximum Uncorrected BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.62 | ColumnjnxPMDayMaxFECUCorrectedWordsExponent | read-only | current | Maximum Uncorrected BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.63 | ColumnjnxPMDayAvgFECUCorrectedWordsMantissa | read-only | current | Average Uncorrected BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.64 | ColumnjnxPMDayAvgFECUCorrectedWordsExponent | read-only | current | Average Uncorrected BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.65 | ColumnjnxPMDayMinRxSignalPower | read-only | current | Min RxSignalPower - receive signal power |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.66 | ColumnjnxPMDAyMaxRxSignalPower | read-only | current | Max RxSignalPower - receive signal power |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.67 | ColumnjnxPMDAyAvgRxSignalPower | read-only | current | Avg RxSignalPower - receive signal power |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.68 | ColumnjnxPMDayMinOSNR | read-only | current | Min OSNR - optical signal to noise ratio |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.69 | ColumnjnxPMDayMaxOSNR | read-only | current | Max OSNR - optical signal to noise ratio |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.70 | ColumnjnxPMDayAvgOSNR | read-only | current | Avg OSNR - optical signal to noise ratio |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.71 | ColumnjnxPMDayMinSOPMD | read-only | current | Min SOPMD - second-order polarization mode dispersion |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.72 | ColumnjnxPMDayMaxSOPMD | read-only | current | Max SOPMD - second-order polarization mode dispersion |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.73 | ColumnjnxPMDayAvgSOPMD | read-only | current | Avg SOPMD - second-order polarization mode dispersion |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.74 | ColumnjnxPMDayMinSupplyVoltage | read-only | current | Minimum Supply Voltage |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.75 | ColumnjnxPMDayMaxSupplyVoltage | read-only | current | Maximum Supply Voltage |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.76 | ColumnjnxPMDayAvgSupplyVoltage | read-only | current | Average Supply Voltage |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.77 | ColumnjnxPMDayMinSOPROC | read-only | current | Minmum SOPROC - State of Polarisation Rate of Change |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.78 | ColumnjnxPMDayMaxSOPROC | read-only | current | Maximum SOPROC - State of Polarisation Rate of Change |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.79 | ColumnjnxPMDayAvgSOPROC | read-only | current | Average SOPROC - State of Polarisation Rate of Change |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.80 | ColumnjnxPMDayMinModulatorBiasXI | read-only | current | Minimum Modulator Bias XI |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.81 | ColumnjnxPMDayMaxModulatorBiasXI | read-only | current | Maximum Modulator Bias XI |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.82 | ColumnjnxPMDayAvgModulatorBiasXI | read-only | current | Average Modulator Bias XI |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.83 | ColumnjnxPMDayMinModulatorBiasXQ | read-only | current | Minimum Modulator Bias XQ |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.84 | ColumnjnxPMDayMaxModulatorBiasXQ | read-only | current | Maximum Modulator Bias XQ |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.85 | ColumnjnxPMDayAvgModulatorBiasXQ | read-only | current | Average Modulator Bias XQ |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.86 | ColumnjnxPMDayMinModulatorBiasYI | read-only | current | Minimum Modulator Bias YI |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.87 | ColumnjnxPMDayMaxModulatorBiasYI | read-only | current | Maximum Modulator Bias YI |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.88 | ColumnjnxPMDayAvgModulatorBiasYI | read-only | current | Average Modulator Bias YI |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.89 | ColumnjnxPMDayMinModulatorBiasYQ | read-only | current | Minimum Modulator Bias YQ |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.90 | ColumnjnxPMDayMaxModulatorBiasYQ | read-only | current | Maximum Modulator Bias YQ |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.91 | ColumnjnxPMDayAvgModulatorBiasYQ | read-only | current | Average Modulator Bias YQ |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.92 | ColumnjnxPMDayMinModulatorBiasXPhase | read-only | current | Minimum Modulator Bias XPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.93 | ColumnjnxPMDayMaxModulatorBiasXPhase | read-only | current | Maximum Modulator Bias XPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.94 | ColumnjnxPMDayAvgModulatorBiasXPhase | read-only | current | Average Modulator Bias XPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.95 | ColumnjnxPMDayMinModulatorBiasYPhase | read-only | current | Minimum Modulator Bias YPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.96 | ColumnjnxPMDayMaxModulatorBiasYPhase | read-only | current | Maximum Modulator Bias YPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.97 | ColumnjnxPMDayAvgModulatorBiasYPhase | read-only | current | Average Modulator Bias YPhase |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.98 | ColumnjnxPMDayMinQMargin | read-only | current | Minimum Q Margin |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.99 | ColumnjnxPMDayMaxQMargin | read-only | current | Maximum Q Margin |
| 1.3.6.1.4.1.2636.3.71.1.2.3.1.100 | ColumnjnxPMDayAvgQMargin | read-only | current | Average Q Margin |
| 1.3.6.1.4.1.2636.3.71.1.2.4 | TablejnxOpticsOTIfPMFECCurrentTable | not-accessible | current | A Performance monitoring FEC Current Table. |
| 1.3.6.1.4.1.2636.3.71.1.2.4.1 | RowjnxOpticsOTIfPMFECCurrentEntry | not-accessible | current | A conceptual entry in the Near end or Far End performance monitoring FEC current table. |
| 1.3.6.1.4.1.2636.3.71.1.2.4.1.1 | ColumnjnxOpticsOTIfPMFECCurrentSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.71.1.2.4.1.2 | ColumnjnxOpticsOTIfPMCurrentFECCorrectedErr | read-only | current | The number of bits corrected by the FEC are counted in the interval. |
| 1.3.6.1.4.1.2636.3.71.1.2.4.1.3 | ColumnjnxOpticsOTIfPMCurrentFECUncorrectedWords | read-only | current | The number of un-corrected words by the FEC are counted over the interval. |
| 1.3.6.1.4.1.2636.3.71.1.2.4.1.4 | ColumnjnxOpticsOTIfPMCurrentFECBERMantissa | read-only | current | The number of Errored bits at receiving side before the FEC function counted over one second .. mantissa. |
| 1.3.6.1.4.1.2636.3.71.1.2.4.1.5 | ColumnjnxOpticsOTIfPMCurrentFECBERExponent | read-only | current | The number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1). |
| 1.3.6.1.4.1.2636.3.71.1.2.4.1.6 | ColumnjnxOpticsOTIfPMCurrentFECMinBERMantissa | read-only | current | The minimum number of Errored bits at receiving side before the FEC function counted over one second .. mantissa. |
| 1.3.6.1.4.1.2636.3.71.1.2.4.1.7 | ColumnjnxOpticsOTIfPMCurrentFECMinBERExponent | read-only | current | The minimum number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1). |
| 1.3.6.1.4.1.2636.3.71.1.2.4.1.8 | ColumnjnxOpticsOTIfPMCurrentFECMaxBERMantissa | read-only | current | The maximum number of Errored bits at receiving side before the FEC function counted over one second .. mantissa. |
| 1.3.6.1.4.1.2636.3.71.1.2.4.1.9 | ColumnjnxOpticsOTIfPMCurrentFECMaxBERExponent | read-only | current | The maximum number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1). |
| 1.3.6.1.4.1.2636.3.71.1.2.4.1.10 | ColumnjnxOpticsOTIfPMCurrentFECAvgBERMantissa | read-only | current | The average number of Errored bits at receiving side before the FEC function counted over one second .. mantissa. |
| 1.3.6.1.4.1.2636.3.71.1.2.4.1.11 | ColumnjnxOpticsOTIfPMCurrentFECAvgBERExponent | read-only | current | The average number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1). |
| 1.3.6.1.4.1.2636.3.71.1.2.4.1.12 | ColumnjnxOpticsOTIfPMCurrentFECElapsedTime | read-only | current | Time elapsed for this 15 minute interval. |
| 1.3.6.1.4.1.2636.3.71.1.2.4.1.13 | ColumnjnxOpticsOTIfPMFECCurSuspectReason | read-only | current | If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detecte… |
| 1.3.6.1.4.1.2636.3.71.1.2.5 | TablejnxOpticsOTIfPMFECIntervalTable | not-accessible | current | A Performance monitoring FEC Interval Table. |
| 1.3.6.1.4.1.2636.3.71.1.2.5.1 | RowjnxOpticsOTIfPMFECIntervalEntry | not-accessible | current | A conceptual entry in the Near end or Far End performance monitoring FEC interval table. |
| 1.3.6.1.4.1.2636.3.71.1.2.5.1.1 | ColumnjnxOpticsOTIfPMFECIntervalNumber | not-accessible | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior … |
| 1.3.6.1.4.1.2636.3.71.1.2.5.1.2 | ColumnjnxOpticsOTIfPMFECIntervalSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.71.1.2.5.1.3 | ColumnjnxOpticsOTIfPMIntervalFECCorrectedErr | read-only | current | The number of bits corrected by the FEC are counted in the interval. |
| 1.3.6.1.4.1.2636.3.71.1.2.5.1.4 | ColumnjnxOpticsOTIfPMIntervalFECUncorrectedWords | read-only | current | The number of words un-corrected words by the FEC are counted over the interval. |
| 1.3.6.1.4.1.2636.3.71.1.2.5.1.5 | ColumnjnxOpticsOTIfPMIntervalMinFECBERMantissa | read-only | current | The minimun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the minimum Pre FEC BER in the current 24hour… |
| 1.3.6.1.4.1.2636.3.71.1.2.5.1.6 | ColumnjnxOpticsOTIfPMIntervalMinFECBERExponent | read-only | current | The minimun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the minimum Pre FEC BER in the current 24hour… |
| 1.3.6.1.4.1.2636.3.71.1.2.5.1.7 | ColumnjnxOpticsOTIfPMIntervalMaxFECBERMantissa | read-only | current | The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum Pre FEC BER in the current 24hour… |
| 1.3.6.1.4.1.2636.3.71.1.2.5.1.8 | ColumnjnxOpticsOTIfPMIntervalMaxFECBERExponent | read-only | current | The maximun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the maximum Pre FEC BER in the current 24hour… |
| 1.3.6.1.4.1.2636.3.71.1.2.5.1.9 | ColumnjnxOpticsOTIfPMIntervalAvgFECBERMantissa | read-only | current | The average bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the average Pre FEC BER in the current 24hour… |
| 1.3.6.1.4.1.2636.3.71.1.2.5.1.10 | ColumnjnxOpticsOTIfPMIntervalAvgFECBERExponent | read-only | current | The average bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the average Pre FEC BER in the current 24hour… |
| 1.3.6.1.4.1.2636.3.71.1.2.5.1.11 | ColumnjnxOpticsOTIfPMFECIntervalTimeStamp | read-only | current | Time stamp of this interval. |
| 1.3.6.1.4.1.2636.3.71.1.2.5.1.12 | ColumnjnxOpticsOTIfPMFECIntSuspectReason | read-only | current | If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detecte… |
| 1.3.6.1.4.1.2636.3.71.1.2.6 | TablejnxOpticsOTIfPMFECCurrentDayTable | not-accessible | current | A Performance monitoring FEC current day table. |
| 1.3.6.1.4.1.2636.3.71.1.2.6.1 | RowjnxOpticsOTIfPMFECCurrentDayEntry | not-accessible | current | A conceptual entry in the Near end or Far End performance monitoring FEC current day table. |
| 1.3.6.1.4.1.2636.3.71.1.2.6.1.1 | ColumnjnxOpticsOTIfPMFECCurrentDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.71.1.2.6.1.2 | ColumnjnxOpticsOTIfPMCurrentDayFECCorrectedErr | read-only | current | The number of bits corrected by the FEC are counted in the interval. |
| 1.3.6.1.4.1.2636.3.71.1.2.6.1.3 | ColumnjnxOpticsOTIfPMCurrentDayFECUncorrectedWords | read-only | current | The number of words un-corrected by the FEC are counted over the Day. |
| 1.3.6.1.4.1.2636.3.71.1.2.6.1.4 | ColumnjnxOpticsOTIfPMCurrentDayMinFECBERMantissa | read-only | current | The minimun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the minimum PreFEC BER in the current 24hour … |
| 1.3.6.1.4.1.2636.3.71.1.2.6.1.5 | ColumnjnxOpticsOTIfPMCurrentDayMinFECBERExponent | read-only | current | The minimun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the minimum PreFEC BER in the current 24hour … |
| 1.3.6.1.4.1.2636.3.71.1.2.6.1.6 | ColumnjnxOpticsOTIfPMCurrentDayMaxFECBERMantissa | read-only | current | The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum PreFEC BER in the current 24hour … |
| 1.3.6.1.4.1.2636.3.71.1.2.6.1.7 | ColumnjnxOpticsOTIfPMCurrentDayMaxFECBERExponent | read-only | current | The maximun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the maximum PreFEC BER in the current 24hour … |
| 1.3.6.1.4.1.2636.3.71.1.2.6.1.8 | ColumnjnxOpticsOTIfPMCurrentDayAvgFECBERMantissa | read-only | current | The average bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the average PreFEC BER in the current 24hour … |
| 1.3.6.1.4.1.2636.3.71.1.2.6.1.9 | ColumnjnxOpticsOTIfPMCurrentDayAvgFECBERExponent | read-only | current | The average bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the average PreFEC BER in the current 24hour … |
| 1.3.6.1.4.1.2636.3.71.1.2.6.1.10 | ColumnjnxOpticsOTIfPMFECCurrentDayElapsedTime | read-only | current | Time elapsed for current day. |
| 1.3.6.1.4.1.2636.3.71.1.2.6.1.11 | ColumnjnxOpticsOTIfPMFECCurDaySuspectReason | read-only | current | If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5… |
| 1.3.6.1.4.1.2636.3.71.1.2.7 | TablejnxOpticsOTIfPMFECPrevDayTable | not-accessible | current | A Performance monitoring FEC previous day table. |
| 1.3.6.1.4.1.2636.3.71.1.2.7.1 | RowjnxOpticsOTIfPMFECPrevDayEntry | not-accessible | current | A conceptual entry in the Near end or Far End performance monitoring FEC previous day table. |
| 1.3.6.1.4.1.2636.3.71.1.2.7.1.1 | ColumnjnxOpticsOTIfPMFECPrevDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.71.1.2.7.1.2 | ColumnjnxOpticsOTIfPMPrevDayFECCorrectedErr | read-only | current | The number of bits corrected by the FEC are counted in the previous day. |
| 1.3.6.1.4.1.2636.3.71.1.2.7.1.3 | ColumnjnxOpticsOTIfPMPrevDayFECUncorrectedWords | read-only | current | The number of un-corrected words by the FEC are counted over the previous Day. |
| 1.3.6.1.4.1.2636.3.71.1.2.7.1.4 | ColumnjnxOpticsOTIfPMPrevDayMinFECBERMantissa | read-only | current | The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum Pre FEC BER in the previous 24hou… |
| 1.3.6.1.4.1.2636.3.71.1.2.7.1.5 | ColumnjnxOpticsOTIfPMPrevDayMinFECBERExponent | read-only | current | The minimun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the maximum Pre FEC BER in the previous 24hou… |
| 1.3.6.1.4.1.2636.3.71.1.2.7.1.6 | ColumnjnxOpticsOTIfPMPrevDayMaxFECBERMantissa | read-only | current | The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum Pre FEC BER in the previous 24hou… |
| 1.3.6.1.4.1.2636.3.71.1.2.7.1.7 | ColumnjnxOpticsOTIfPMPrevDayMaxFECBERExponent | read-only | current | The maximun bit error rate at receiving side before the FEC function counted over one second .. exponent (eg -3). This is the maximum Pre FEC BER in the previo… |
| 1.3.6.1.4.1.2636.3.71.1.2.7.1.8 | ColumnjnxOpticsOTIfPMPrevDayAvgFECBERMantissa | read-only | current | The average bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the average Pre FEC BER during the previous 2… |
| 1.3.6.1.4.1.2636.3.71.1.2.7.1.9 | ColumnjnxOpticsOTIfPMPrevDayAvgFECBERExponent | read-only | current | The average bit error rate at receiving side before the FEC function counted over one second .. exponent (eg -3). This is the average Pre FEC BER during the pr… |
| 1.3.6.1.4.1.2636.3.71.1.2.7.1.10 | ColumnjnxOpticsOTIfPMFECPrevDayTimeStamp | read-only | current | Time stamp for the Prev day. |
| 1.3.6.1.4.1.2636.3.71.1.2.7.1.11 | ColumnjnxOpticsOTIfPMFECPrevDaySuspectReason | read-only | current | If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5… |
| 1.3.6.1.4.1.2636.3.71.1.2.8 | TablejnxOpticsOTIfPMFECConfigTable | not-accessible | current | A table of current PM entries. |
| 1.3.6.1.4.1.2636.3.71.1.2.8.1 | RowjnxOpticsOTIfPMFECConfigEntry | not-accessible | current | A conceptual row that contains information about the OT interface PM Current Table. |
| 1.3.6.1.4.1.2636.3.71.1.2.8.1.1 | ColumnjnxOpticsOTIfPMFECValidIntervals | read-only | current | The number of contiguous 15 minute intervals for which valid FEC PM data is available for the particular interface. |
| 1.3.6.1.4.1.2636.3.71.1.2.8.1.2 | ColumnjnxOpticsOTIfPM15MinPreFECBERMantissaThreshold | read-write | current | BER (mantissa) by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxOpticsOTIf15MinThreshPre… |
| 1.3.6.1.4.1.2636.3.71.1.2.8.1.3 | ColumnjnxOpticsOTIfPM15MinPreFECBERExponentThreshold | read-write | current | The Pre FEC BER (exponent) by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinTh… |
| 1.3.6.1.4.1.2636.3.71.1.2.8.1.4 | ColumnjnxOpticsOTIfPM24HourPreFECBERMantissaThreshold | read-write | current | BER (mantissa) by the interface within any given 24 Hour performance data collection period, which causes the SNMP agent to send jnxoptIf5s24Hour15MinThreshPre… |
| 1.3.6.1.4.1.2636.3.71.1.2.8.1.5 | ColumnjnxOpticsOTIfPM24HourPreFECBERExponentThreshold | read-write | current | The Pre FEC BER (exponent) by the interface within any given 24 Hour performance data collection period, which causes the SNMP agent to send jnxoptIf5s24Hour15… |
| 1.3.6.1.4.1.2636.3.71.1.2.8.1.6 | ColumnjnxOpticsOTIfPMFECBEREnableTCA | read-write | current | Enable TCA's - 15minute and 24hr for FEC BER |
| 1.3.6.1.4.1.2636.3.71.1.2.9 | TablejnxIfOpticsPMCurrentTable | not-accessible | current | A table of current PM entries. |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1 | RowjnxIfOpticsPMCurrentEntry | not-accessible | current | A conceptual row that contains information about the PM Current Table. |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.1 | ColumnjnxIfOpticsPMCurrentLaneIndex | not-accessible | current | This is the optics lane number. |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.2 | ColumnjnxIfOpticsPMCurChromaticDispersion | read-only | current | Residual Chromatic Dispersion measured at Rx Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.3 | ColumnjnxIfOpticsPMCurDiffGroupDelay | read-only | current | Differential group delay |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.4 | ColumnjnxIfOpticsPMCurPolarizationState | read-only | current | Polarization state |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.5 | ColumnjnxIfOpticsPMCurPolarDepLoss | read-only | current | The polarisation dependent loss (PDL) is the difference (in dB) between the maximum and minimum values of the channel insertion loss (or gain) of the black-lin… |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.6 | ColumnjnxIfOpticsPMCurQ | read-only | current | 'Q' factor estimated at Rx Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.7 | ColumnjnxIfOpticsPMCurSNR | read-only | current | SNR - signal to noise ratio |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.8 | ColumnjnxIfOpticsPMCurTxOutputPower | read-only | current | TxOutputPower - transmit output power |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.9 | ColumnjnxIfOpticsPMCurRxInputPower | read-only | current | RxInputPower - receive output power |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.10 | ColumnjnxIfOpticsPMCurMinChromaticDispersion | read-only | current | Min Residual Chromatic Dispersion measured at Rx Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.11 | ColumnjnxIfOpticsPMCurMaxChromaticDispersion | read-only | current | Max Residual Chromatic Dispersion measured at Rx Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.12 | ColumnjnxIfOpticsPMCurAvgChromaticDispersion | read-only | current | Average Residual Chromatic Dispersion measured at Rx Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.13 | ColumnjnxIfOpticsPMCurMinDiffGroupDelay | read-only | current | Min Differential group delay |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.14 | ColumnjnxIfOpticsPMCurMaxDiffGroupDelay | read-only | current | Max Differential group delay |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.15 | ColumnjnxIfOpticsPMCurAvgDiffGroupDelay | read-only | current | Average Differential group delay |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.16 | ColumnjnxIfOpticsPMCurMinPolarState | read-only | current | Min Polarization state |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.17 | ColumnjnxIfOpticsPMCurMaxPolarState | read-only | current | Max Polarization state |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.18 | ColumnjnxIfOpticsPMCurAvgPolarState | read-only | current | Avg Polarization state |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.19 | ColumnjnxIfOpticsPMCurMinPolarDepLoss | read-only | current | Min - The polarisation dependent loss (PDL) |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.20 | ColumnjnxIfOpticsPMCurMaxPolarDepLoss | read-only | current | Max - The polarisation dependent loss (PDL) |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.21 | ColumnjnxIfOpticsPMCurAvgPolarDepLoss | read-only | current | Avg - The polarisation dependent loss (PDL) |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.22 | ColumnjnxIfOpticsPMCurMinQ | read-only | current | Min 'Q' factor estimated at Rx Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.23 | ColumnjnxIfOpticsPMCurMaxQ | read-only | current | Max 'Q' factor estimated at Rx Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.24 | ColumnjnxIfOpticsPMCurAvgQ | read-only | current | Avg 'Q' factor estimated at Rx Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.25 | ColumnjnxIfOpticsPMCurMinSNR | read-only | current | Min SNR - signal to noise ratio |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.26 | ColumnjnxIfOpticsPMCurMaxSNR | read-only | current | Max SNR - signal to noise ratio |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.27 | ColumnjnxIfOpticsPMCurAvgSNR | read-only | current | Avg SNR - signal to noise ratio |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.28 | ColumnjnxIfOpticsPMCurMinTxOutputPower | read-only | current | Min TxOutputPower - transmit output power |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.29 | ColumnjnxIfOpticsPMCurMaxTxOutputPower | read-only | current | Max TxOutputPower - transmit output power |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.30 | ColumnjnxIfOpticsPMCurAvgTxOutputPower | read-only | current | Avg TxOutputPower - transmit output power |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.31 | ColumnjnxIfOpticsPMCurMinRxInputPower | read-only | current | Min RxInputPower - receive output power |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.32 | ColumnjnxIfOpticsPMCurMaxRxInputPower | read-only | current | Max RxInputPower - receive output power |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.33 | ColumnjnxIfOpticsPMCurAvgRxInputPower | read-only | current | Avg RxInputPower - receive output power |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.34 | ColumnjnxIfOpticsPMCurSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.35 | ColumnjnxIfOpticsPMCurSuspectReason | read-only | current | If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detecte… |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.36 | ColumnjnxIfOpticsPMCurTxLaserBiasCurrent | read-only | current | Trasmit LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.37 | ColumnjnxIfOpticsPMCurMinTxLaserBiasCurrent | read-only | current | Minimum trasmit LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.38 | ColumnjnxIfOpticsPMCurMaxTxLaserBiasCurrent | read-only | current | Maximum trasmit LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.39 | ColumnjnxIfOpticsPMCurAvgTxLaserBiasCurrent | read-only | current | Average LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.40 | ColumnjnxIfOpticsPMCurTemperature | read-only | current | Temperature measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.41 | ColumnjnxIfOpticsPMCurMinTemperature | read-only | current | Minimum Temperature measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.42 | ColumnjnxIfOpticsPMCurMaxTemperature | read-only | current | Maximum Temperature measure at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.43 | ColumnjnxIfOpticsPMCurAvgTemperature | read-only | current | Average Temperature measure at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.44 | ColumnjnxIfOpticsPMCurCarFreqOffset | read-only | current | Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.45 | ColumnjnxIfOpticsPMCurMinCarFreqOffset | read-only | current | Minimum Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.46 | ColumnjnxIfOpticsPMCurMaxCarFreqOffset | read-only | current | Maximum Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.47 | ColumnjnxIfOpticsPMCurAvgCarFreqOffset | read-only | current | Average Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.48 | ColumnjnxIfOpticsPMCurRxLaserBiasCurrent | read-only | current | Received LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.49 | ColumnjnxIfOpticsPMCurMinRxLaserBiasCurrent | read-only | current | Received Minimum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.50 | ColumnjnxIfOpticsPMCurMaxRxLaserBiasCurrent | read-only | current | Received Maximum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.51 | ColumnjnxIfOpticsPMCurAvgRxLaserBiasCurrent | read-only | current | Received Average LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.52 | ColumnjnxIfOpticsPMCurTecCurrent | read-only | current | Received TecCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.53 | ColumnjnxIfOpticsPMCurMinTecCurrent | read-only | current | Received Minimum TecCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.54 | ColumnjnxIfOpticsPMCurMaxTecCurrent | read-only | current | Received Maximum TecCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.55 | ColumnjnxIfOpticsPMCurAvgTecCurrent | read-only | current | Received Average TecCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.56 | ColumnjnxIfOpticsPMCurResidualDispersion | read-only | current | Residual Dispersion measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.57 | ColumnjnxIfOpticsPMCurMinResidualDispersion | read-only | current | Minimum Residual Dispersion measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.58 | ColumnjnxIfOpticsPMCurMaxResidualDispersion | read-only | current | Maximum Residual Dispersion measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.59 | ColumnjnxIfOpticsPMCurAvgResidualDispersion | read-only | current | Average Residual Dispersion measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.60 | ColumnjnxIfOpticsPMCurLevelHistogram | read-only | current | The rate of measured signal at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.61 | ColumnjnxIfOpticsPMCurMinLevelHistogram | read-only | current | The Minimum rate of measured signal at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.62 | ColumnjnxIfOpticsPMCurMaxLevelHistogram | read-only | current | The Maximum rate of measured signal at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.63 | ColumnjnxIfOpticsPMCurAvgLevelHistogram | read-only | current | The Average rate of measured signal at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.64 | ColumnjnxIfOpticsPMCurLaserFrequencyError | read-only | current | Laser Frequency Error measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.65 | ColumnjnxIfOpticsPMCurMinLaserFrequencyError | read-only | current | Minimum Laser Frequency Error measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.66 | ColumnjnxIfOpticsPMCurMaxLaserFrequencyError | read-only | current | Maximum Laser Frequency Error measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.67 | ColumnjnxIfOpticsPMCurAvgLaserFrequencyError | read-only | current | Average Laser Frequency Error measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.68 | ColumnjnxIfOpticsPMCurFECCorrectedErrorsMantissa | read-only | current | Pre-FEC BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.69 | ColumnjnxIfOpticsPMCurFECCorrectedErrorsExponent | read-only | current | Pre-FEC BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.70 | ColumnjnxIfOpticsPMCurMinFECCorrectedErrorsMantissa | read-only | current | Minimum Pre-FEC BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.71 | ColumnjnxIfOpticsPMCurMinFECCorrectedErrorsExponent | read-only | current | Minimum Pre-FEC BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.72 | ColumnjnxIfOpticsPMCurMaxFECCorrectedErrorsMantissa | read-only | current | Maximum Pre-FEC BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.73 | ColumnjnxIfOpticsPMCurMaxFECCorrectedErrorsExponent | read-only | current | Maximum Pre-FEC BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.74 | ColumnjnxIfOpticsPMCurAvgFECCorrectedErrorsMantissa | read-only | current | Average Pre-FEC BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.75 | ColumnjnxIfOpticsPMCurAvgFECCorrectedErrorsExponent | read-only | current | Average Pre-FEC BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.76 | ColumnjnxIfOpticsPMCurFECUCorrectedWordsMantissa | read-only | current | Uncorrected BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.77 | ColumnjnxIfOpticsPMCurFECUCorrectedWordsExponent | read-only | current | Uncorrected BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.78 | ColumnjnxIfOpticsPMCurMinFECUCorrectedWordsMantissa | read-only | current | Minimum Uncorrected BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.79 | ColumnjnxIfOpticsPMCurMinFECUCorrectedWordsExponent | read-only | current | Minimum Uncorrected BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.80 | ColumnjnxIfOpticsPMCurMaxFECUCorrectedWordsMantissa | read-only | current | Maximum Uncorrected BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.81 | ColumnjnxIfOpticsPMCurMaxFECUCorrectedWordsExponent | read-only | current | Maximum Uncorrected BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.82 | ColumnjnxIfOpticsPMCurAvgFECUCorrectedWordsMantissa | read-only | current | Average Uncorrected BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.9.1.83 | ColumnjnxIfOpticsPMCurAvgFECUCorrectedWordsExponent | read-only | current | Average Uncorrected BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.10 | TablejnxIfOpticsPMIntervalTable | not-accessible | current | A table of current PM entries. |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1 | RowjnxIfOpticsPMIntervalEntry | not-accessible | current | A conceptual row that contains information about the PM Interval Table. |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.1 | ColumnjnxIfOpticsPMIntervalLaneIndex | not-accessible | current | This is the optics lane number. |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.2 | ColumnjnxIfOpticsPMIntervalNumber | not-accessible | current | This is the 15 mintute interavl number. |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.3 | ColumnjnxIfOpticsPMIntMinChromaticDispersion | read-only | current | Residual Chromatic Dispersion measured at Rx Transceiver port - min in the 15 minute interval |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.4 | ColumnjnxIfOpticsPMIntMaxChromaticDispersion | read-only | current | Residual Chromatic Dispersion measured at Rx Transceiver port - max in the 15 minute interval |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.5 | ColumnjnxIfOpticsPMIntAvgChromaticDispersion | read-only | current | Residual Chromatic Dispersion measured at Rx Transceiver port - average in the 15 minute interval |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.6 | ColumnjnxIfOpticsPMIntMinDiffGroupDelay | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.7 | ColumnjnxIfOpticsPMIntMaxDiffGroupDelay | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.8 | ColumnjnxIfOpticsPMIntAvgDiffGroupDelay | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.9 | ColumnjnxIfOpticsPMIntMinPolarState | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.10 | ColumnjnxIfOpticsPMIntMaxPolarState | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.11 | ColumnjnxIfOpticsPMIntAvgPolarState | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.12 | ColumnjnxIfOpticsPMIntMinPolarDependentLoss | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.13 | ColumnjnxIfOpticsPMIntMaxPolarDependentLoss | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.14 | ColumnjnxIfOpticsPMIntAvgPolarDependentLoss | read-only | current | Polarization Dependent Loss interval |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.15 | ColumnjnxIfOpticsPMIntMinQ | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.16 | ColumnjnxIfOpticsPMIntMaxQ | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.17 | ColumnjnxIfOpticsPMIntAvgQ | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.18 | ColumnjnxIfOpticsPMIntMinSNR | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.19 | ColumnjnxIfOpticsPMIntMaxSNR | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.20 | ColumnjnxIfOpticsPMIntAvgSNR | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.21 | ColumnjnxIfOpticsPMIntMinTxOutputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.22 | ColumnjnxIfOpticsPMIntMaxTxOutputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.23 | ColumnjnxIfOpticsPMIntAvgTxOutputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.24 | ColumnjnxIfOpticsPMIntMinRxInputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.25 | ColumnjnxIfOpticsPMIntMaxRxInputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.26 | ColumnjnxIfOpticsPMIntAvgRxInputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.27 | ColumnjnxIfOpticsPMIntTimeStamp | read-only | current | Time stamp PM interval |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.28 | ColumnjnxIfOpticsPMIntSuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.29 | ColumnjnxIfOpticsPMIntSuspectReason | read-only | current | If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detecte… |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.30 | ColumnjnxIfOpticsPMIntMinTxLaserBiasCurrent | read-only | current | Transmit Minimum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.31 | ColumnjnxIfOpticsPMIntMaxTxLaserBiasCurrent | read-only | current | Transmit Maximum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.32 | ColumnjnxIfOpticsPMIntAvgTxLaserBiasCurrent | read-only | current | Transmit Average LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.33 | ColumnjnxIfOpticsPMIntMinTemperature | read-only | current | Minimum Temperature measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.34 | ColumnjnxIfOpticsPMIntMaxTemperature | read-only | current | Maximum Temperature measure at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.35 | ColumnjnxIfOpticsPMIntAvgTemperature | read-only | current | Average Temperature measure at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.36 | ColumnjnxIfOpticsPMIntMinCarFreqOffset | read-only | current | Minimum Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.37 | ColumnjnxIfOpticsPMIntMaxCarFreqOffset | read-only | current | Maximum Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.38 | ColumnjnxIfOpticsPMIntAvgCarFreqOffset | read-only | current | Average Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.39 | ColumnjnxIfOpticsPMIntMinRxLaserBiasCurrent | read-only | current | Receive Minimum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.40 | ColumnjnxIfOpticsPMIntMaxRxLaserBiasCurrent | read-only | current | Receive Maximum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.41 | ColumnjnxIfOpticsPMIntAvgRxLaserBiasCurrent | read-only | current | Receive Average LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.42 | ColumnjnxIfOpticsPMIntMinTecCurrent | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.43 | ColumnjnxIfOpticsPMIntMaxTecCurrent | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.44 | ColumnjnxIfOpticsPMIntAvgTecCurrent | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.45 | ColumnjnxIfOpticsPMIntMinResidualDispersion | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.46 | ColumnjnxIfOpticsPMIntMaxResidualDispersion | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.47 | ColumnjnxIfOpticsPMIntAvgResidualDispersion | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.48 | ColumnjnxIfOpticsPMIntMinLevelHistogram | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.49 | ColumnjnxIfOpticsPMIntMaxLevelHistogram | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.50 | ColumnjnxIfOpticsPMIntAvgLevelHistogram | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.51 | ColumnjnxIfOpticsPMIntMinLaserFrequencyError | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.52 | ColumnjnxIfOpticsPMIntMaxLaserFrequencyError | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.53 | ColumnjnxIfOpticsPMIntAvgLaserFrequencyError | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.54 | ColumnjnxIfOpticsPMIntMinFECCorrectedErrorsMantissa | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.55 | ColumnjnxIfOpticsPMIntMinFECCorrectedErrorsExponent | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.56 | ColumnjnxIfOpticsPMIntMaxFECCorrectedErrorsMantissa | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.57 | ColumnjnxIfOpticsPMIntMaxFECCorrectedErrorsExponent | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.58 | ColumnjnxIfOpticsPMIntAvgFECCorrectedErrorsMantissa | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.59 | ColumnjnxIfOpticsPMIntAvgFECCorrectedErrorsExponent | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.60 | ColumnjnxIfOpticsPMIntMinFECUCorrectedWordsMantissa | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.61 | ColumnjnxIfOpticsPMIntMinFECUCorrectedWordsExponent | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.62 | ColumnjnxIfOpticsPMIntMaxFECUCorrectedWordsMantissa | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.63 | ColumnjnxIfOpticsPMIntMaxFECUCorrectedWordsExponent | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.64 | ColumnjnxIfOpticsPMIntAvgFECUCorrectedWordsMantissa | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.10.1.65 | ColumnjnxIfOpticsPMIntAvgFECUCorrectedWordsExponent | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11 | TablejnxIfOpticsPMDayTable | not-accessible | current | A table of current PM Day entries. |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1 | RowjnxIfOpticsPMDayEntry | not-accessible | current | A conceptual row that contains information about the PM Day Table |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.1 | ColumnjnxIfOpticsPMDayLaneIndex | not-accessible | current | This is the optics lane number. |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.2 | ColumnjnxIfOpticsPMDayIndex | not-accessible | current | This is 1 - cur day/ 2 - prev day |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.3 | ColumnjnxIfOpticsPMDayMinChromaticDispersion | read-only | current | Residual Chromatic Dispersion measured at Rx Transceiver port - min in the day |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.4 | ColumnjnxIfOpticsPMDayMaxChromaticDispersion | read-only | current | Residual Chromatic Dispersion measured at Rx Transceiver port - max in the day |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.5 | ColumnjnxIfOpticsPMDayAvgChromaticDispersion | read-only | current | Residual Chromatic Dispersion measured at Rx Transceiver port - average in the day |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.6 | ColumnjnxIfOpticsPMDayMinDiffGroupDelay | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.7 | ColumnjnxIfOpticsPMDayMaxDiffGroupDelay | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.8 | ColumnjnxIfOpticsPMDayAvgDiffGroupDelay | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.9 | ColumnjnxIfOpticsPMDayMinPolarState | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.10 | ColumnjnxIfOpticsPMDayMaxPolarState | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.11 | ColumnjnxIfOpticsPMDayAvgPolarState | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.12 | ColumnjnxIfOpticsPMDayMinPolarDependentLoss | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.13 | ColumnjnxIfOpticsPMDayMaxPolarDependentLoss | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.14 | ColumnjnxIfOpticsPMDayAvgPolarDependentLoss | read-only | current | Polarization Dependent Loss interval |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.15 | ColumnjnxIfOpticsPMDayMinQ | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.16 | ColumnjnxIfOpticsPMDayMaxQ | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.17 | ColumnjnxIfOpticsPMDayAvgQ | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.18 | ColumnjnxIfOpticsPMDayMinSNR | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.19 | ColumnjnxIfOpticsPMDayMaxSNR | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.20 | ColumnjnxIfOpticsPMDayAvgSNR | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.21 | ColumnjnxIfOpticsPMDayMinTxOutputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.22 | ColumnjnxIfOpticsPMDayMaxTxOutputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.23 | ColumnjnxIfOpticsPMDayAvgTxOutputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.24 | ColumnjnxIfOpticsPMDayMinRxInputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.25 | ColumnjnxIfOpticsPMDayMaxRxInputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.26 | ColumnjnxIfOpticsPMDayAvgRxInputPower | read-only | current | |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.27 | ColumnjnxIfOpticsPMDayTimeStamp | read-only | current | Time for the Day. |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.28 | ColumnjnxIfOpticsPMDaySuspectedFlag | read-only | current | If true, the data in this entry may be unreliable. |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.29 | ColumnjnxIfOpticsPMDaySuspectReason | read-only | current | If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detecte… |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.30 | ColumnjnxIfOpticsPMDayMinTxLaserBiasCurrent | read-only | current | Transmit LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.31 | ColumnjnxIfOpticsPMDayMaxTxLaserBiasCurrent | read-only | current | Transmit Minimum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.32 | ColumnjnxIfOpticsPMDayAvgTxLaserBiasCurrent | read-only | current | Transmit Maximum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.33 | ColumnjnxIfOpticsPMDayMinTemperature | read-only | current | Minimum Temperature measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.34 | ColumnjnxIfOpticsPMDayMaxTemperature | read-only | current | Maximum Temperature measure at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.35 | ColumnjnxIfOpticsPMDayAvgTemperature | read-only | current | Average Temperature measure at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.36 | ColumnjnxIfOpticsPMDayMinCarFreqOffset | read-only | current | Minimum Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.37 | ColumnjnxIfOpticsPMDayMaxCarFreqOffset | read-only | current | Maximum Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.38 | ColumnjnxIfOpticsPMDayAvgCarFreqOffset | read-only | current | Average Carrier frequency offset measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.39 | ColumnjnxIfOpticsPMDayMinRxLaserBiasCurrent | read-only | current | Receive LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.40 | ColumnjnxIfOpticsPMDayMaxRxLaserBiasCurrent | read-only | current | Receive Minimum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.41 | ColumnjnxIfOpticsPMDayAvgRxLaserBiasCurrent | read-only | current | Receive Maximum LaserBiasCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.42 | ColumnjnxIfOpticsPMDayMinTecCurrent | read-only | current | Received Minimum TecCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.43 | ColumnjnxIfOpticsPMDayMaxTecCurrent | read-only | current | Received Maximum TecCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.44 | ColumnjnxIfOpticsPMDayAvgTecCurrent | read-only | current | Received Average TecCurrent measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.45 | ColumnjnxIfOpticsPMDayMinResidualDispersion | read-only | current | Minimum Residual Dispersion measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.46 | ColumnjnxIfOpticsPMDayMaxResidualDispersion | read-only | current | Maximum Residual Dispersion measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.47 | ColumnjnxIfOpticsPMDayAvgResidualDispersion | read-only | current | Average Residual Dispersion measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.48 | ColumnjnxIfOpticsPMDayMinLevelHistogram | read-only | current | The Minimum rate of measured signal at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.49 | ColumnjnxIfOpticsPMDayMaxLevelHistogram | read-only | current | The Maximum rate of measured signal at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.50 | ColumnjnxIfOpticsPMDayAvgLevelHistogram | read-only | current | The Average rate of measured signal at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.51 | ColumnjnxIfOpticsPMDayMinLaserFrequencyError | read-only | current | Minimum Laser Frequency Error measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.52 | ColumnjnxIfOpticsPMDayMaxLaserFrequencyError | read-only | current | Maximum Laser Frequency Error measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.53 | ColumnjnxIfOpticsPMDayAvgLaserFrequencyError | read-only | current | Average Laser Frequency Error measured at Transceiver port |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.54 | ColumnjnxIfOpticsPMDayMinFECCorrectedErrorsMantissa | read-only | current | Minimum Pre-FEC BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.55 | ColumnjnxIfOpticsPMDayMinFECCorrectedErrorsExponent | read-only | current | Minimum Pre-FEC BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.56 | ColumnjnxIfOpticsPMDayMaxFECCorrectedErrorsMantissa | read-only | current | Maximum Pre-FEC BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.57 | ColumnjnxIfOpticsPMDayMaxFECCorrectedErrorsExponent | read-only | current | Maximum Pre-FEC BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.58 | ColumnjnxIfOpticsPMDayAvgFECCorrectedErrorsMantissa | read-only | current | Average Pre-FEC BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.59 | ColumnjnxIfOpticsPMDayAvgFECCorrectedErrorsExponent | read-only | current | Average Pre-FEC BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.60 | ColumnjnxIfOpticsPMDayMinFECUCorrectedWordsMantissa | read-only | current | Minimum Uncorrected BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.61 | ColumnjnxIfOpticsPMDayMinFECUCorrectedWordsExponent | read-only | current | Minimum Uncorrected BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.62 | ColumnjnxIfOpticsPMDayMaxFECUCorrectedWordsMantissa | read-only | current | Maximum Uncorrected BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.63 | ColumnjnxIfOpticsPMDayMaxFECUCorrectedWordsExponent | read-only | current | Maximum Uncorrected BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.64 | ColumnjnxIfOpticsPMDayAvgFECUCorrectedWordsMantissa | read-only | current | Average Uncorrected BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.2.11.1.65 | ColumnjnxIfOpticsPMDayAvgFECUCorrectedWordsExponent | read-only | current | Average Uncorrected BER since last counter reset |
| 1.3.6.1.4.1.2636.3.71.1.3 | NodejnxOpticsAlarm | |||
| 1.3.6.1.4.1.2636.3.71.1.3.1 | TablejnxOpticsNotificationTable | not-accessible | current | A table of Notification entries. |
| 1.3.6.1.4.1.2636.3.71.1.3.1.1 | RowjnxOpticsNotificationEntry | not-accessible | current | A conceptual entry in the Notification table. |
| 1.3.6.1.4.1.2636.3.71.1.3.1.1.1 | ColumnjnxOpticsNotificationLocation | accessible-for-notify | current | The object identifies indicates if this entry was for Near end/Far end. |
| 1.3.6.1.4.1.2636.3.71.1.3.1.1.2 | ColumnjnxOpticsNotificationDirection | accessible-for-notify | current | The object identifies indicates if this entry was for for the Tx/Rx or both. |
| 1.3.6.1.4.1.2636.3.71.1.3.1.1.3 | ColumnjnxOpticsLastNotificationId | accessible-for-notify | current | The object identifies the OTN alarm that most recently was set or cleared. |
| 1.3.6.1.4.1.2636.3.71.1.3.1.1.4 | ColumnjnxOpticsNotificationSeverity | accessible-for-notify | current | The object identifies the severity of the last alarm/alert that most recently was set or cleared. |
| 1.3.6.1.4.1.2636.3.71.1.3.1.1.5 | ColumnjnxOpticsNotificationDate | accessible-for-notify | current | This specifies the date and time when this alarm occurred. |
| 1.3.6.1.4.1.2636.3.71.1.3.1.1.6 | ColumnjnxOpticsNotificationLaneIndex | not-accessible | current | The lane index associated with this subject.. eg port. |
| 1.3.6.1.4.1.2636.3.71.1.4 | NodejnxOpticsOCh2 | |||
| 1.3.6.1.4.1.2636.3.71.1.4.1 | TablejnxOpticsOCh2ConfigTable | not-accessible | obsolete | Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the optics config Table. |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1 | RowjnxOpticsOCh2ConfigEntry | not-accessible | obsolete | A conceptual row that contains information about the optics config OCh2 Table. |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.1 | ColumnjnxOpticsOCh2CfgContIndex | not-accessible | obsolete | The Contianer index associated with this subject |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.2 | ColumnjnxOpticsOCh2CfgL1Index | not-accessible | obsolete | FPC slot number of the interface |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.3 | ColumnjnxOpticsOCh2CfgL2Index | not-accessible | obsolete | PIC slot number of the interface |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.4 | ColumnjnxOpticsOCh2CfgL3Index | not-accessible | obsolete | Port number of the interface |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.5 | ColumnjnxOpticsOCh2CfgL4Index | not-accessible | obsolete | Sub-Port number of the interface |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.6 | ColumnjnxOpticsOCh2Type | read-only | obsolete | 0 - none 1 - SFP 2 - XFP 3 - SFP+ 4 - XFP+ 5 - CFP 6 - CFP+ 7 - Non pluggable |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.7 | ColumnjnxOpticsOCh2LaserEnable | read-write | obsolete | 0 - laser off 1 - laser on |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.8 | ColumnjnxOpticsOCh2Wavelength | read-write | obsolete | The transmit wavelength of the laser. |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.9 | ColumnjnxOpticsOCh2Spacing | read-only | obsolete | A minimum nominal difference in frequency (GHz) between two adjacent channels. |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.10 | ColumnjnxOpticsOCh2Modulation | read-only | obsolete | Modulation Unknown - (1), NonPSK - (2), ODB - (3), DPSK - (4), QPSK - (5), DQPSK - (6), DPQPSK - (7), 16QAM - (8), 64QAM - (9), 256QAM - (10) |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.11 | ColumnjnxOpticsOCh2TxOpticalPower | read-write | obsolete | Transmit optical power. |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.12 | ColumnjnxOpticsOCh2RxOpticalPower | read-only | obsolete | Receive optical power. |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.13 | ColumnjnxOpticsOCh2ModTempHighThresh | read-only | obsolete | High module temerature in degree fahrenheit for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per p… |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.14 | ColumnjnxOpticsOCh2ModTempLowThresh | read-only | obsolete | Low module temerature in degree fahrenheit for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per pe… |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.15 | ColumnjnxOpticsOCh2TxPowHighThresh | read-write | obsolete | Tx power for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.16 | ColumnjnxOpticsOCh2TxPowLowThresh | read-write | obsolete | Tx Power for a 15 minute period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.17 | ColumnjnxOpticsOCh2RxPowHighThresh | read-write | obsolete | Rx power for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.18 | ColumnjnxOpticsOCh2RxPowLowThresh | read-write | obsolete | Rx Power for a 15 minute period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.19 | ColumnjnxOpticsOCh24HourModTemHiThresh | read-only | obsolete | High module temerature in degree fahrenheit for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per per… |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.20 | ColumnjnxOpticsOCh24HourModTemLoThresh | read-only | obsolete | Low module temerature in degree fahrenheit for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per peri… |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.21 | ColumnjnxOpticsOCh24HourTxPowHiThresh | read-write | obsolete | Tx power for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.22 | ColumnjnxOpticsOCh24HourTxPowLoThresh | read-write | obsolete | Tx for a 24 hour period Power below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.23 | ColumnjnxOpticsOCh24HourRxPowHiThresh | read-write | obsolete | Rx power for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.24 | ColumnjnxOpticsOCh24HourRxPowLoThresh | read-write | obsolete | Rx Power for a 24 hour period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.25 | ColumnjnxOpticsOCh2RxLosPowWarnThresh | read-write | obsolete | Rx Power warning threshold for seeting the optical LOS warning. |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.26 | ColumnjnxOpticsOCh2RxLosPowAlarmThresh | read-write | obsolete | Rx Power alarm threshold for seeting the optical LOS warning. |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.27 | ColumnjnxOpticsOCh2CurrentStatus | read-only | obsolete | |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.28 | ColumnjnxOpticsOCh2TxPowHiEnableTCA | read-write | obsolete | Enable/Disable for the Tx Power High TCA. |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.29 | ColumnjnxOpticsOCh2TxPowLoEnableTCA | read-write | obsolete | Enable/Disable for the Tx Power Low TCA. |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.30 | ColumnjnxOpticsOCh2RxPowHiEnableTCA | read-write | obsolete | Enable/Disable for the Rx Power High TCA. |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.31 | ColumnjnxOpticsOCh2RxPowLoEnableTCA | read-write | obsolete | Enable/Disable for the Rx Power Low TCA. |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.32 | ColumnjnxOpticsOCh2ModTempHiEnableTCA | read-write | obsolete | Enable/Disable for the Module Temp High TCA. |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.33 | ColumnjnxOpticsOCh2ModTempLoEnableTCA | read-write | obsolete | Enable/Disable for the Module Temp Low TCA. |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.34 | ColumnjnxOpticsOCh2CarFreqOffHiEnTCA | read-write | obsolete | Enable/Disable for the Carrier Frequency Offset High TCA. |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.35 | ColumnjnxOpticsOCh2CarFreqOffLoEnTCA | read-write | obsolete | Enable/Disable for the CarrierFreqOffetLow TCA's. |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.36 | ColumnjnxOpticsOCh2CarFreqOffHiThresh | read-write | obsolete | Carrier frequency offset for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.37 | ColumnjnxOpticsOCh24HourCarFreqOffHiTh | read-write | obsolete | Carrier frequency offset for a 24 Hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.38 | ColumnjnxOpticsOCh2CarFreqOffLoThresh | read-write | obsolete | Carrier frequency offset for a 15 minute period Low which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.4.1.1.39 | ColumnjnxOpticsOCh24HourCarFreqOffLoTh | read-write | obsolete | Carrier frequency offset for a 24 Hour period Low which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period . |
| 1.3.6.1.4.1.2636.3.71.1.4.2 | TablejnxOpticsOCh2TraceToneCfgTable | not-accessible | obsolete | Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the optics tests. |
| 1.3.6.1.4.1.2636.3.71.1.4.2.1 | RowjnxOpticsOCh2TraceToneCfgEntry | not-accessible | obsolete | Information about the optics FRU's. |
| 1.3.6.1.4.1.2636.3.71.1.4.2.1.1 | ColumnjnxOpticsOCh2TraceToneCfgIndx | not-accessible | obsolete | Container Index associated with this subject.. |
| 1.3.6.1.4.1.2636.3.71.1.4.2.1.2 | ColumnjnxOpticsOCh2TraceToneCfgL1Indx | not-accessible | obsolete | FPC Slot number of the interface. |
| 1.3.6.1.4.1.2636.3.71.1.4.2.1.3 | ColumnjnxOpticsOCh2TraceToneCfgL2Indx | not-accessible | obsolete | PIC Slot number of the interface. |
| 1.3.6.1.4.1.2636.3.71.1.4.2.1.4 | ColumnjnxOpticsOCh2TraceToneCfgL3Indx | not-accessible | obsolete | Port number of the interface. |
| 1.3.6.1.4.1.2636.3.71.1.4.2.1.5 | ColumnjnxOpticsOCh2TraceToneCfgL4Indx | not-accessible | obsolete | Sub-Port number of the interface. |
| 1.3.6.1.4.1.2636.3.71.1.4.2.1.6 | ColumnjnxOpticsOCh2TraceToneCfgTxEn | read-write | obsolete | This will enable/disable the transmit Trace tone feature. |
| 1.3.6.1.4.1.2636.3.71.1.4.2.1.7 | ColumnjnxOpticsOCh2TraceToneCfgRxEn | read-write | obsolete | This will enable/disable the receive Trace tone feature. |
| 1.3.6.1.4.1.2636.3.71.1.4.2.1.8 | ColumnjnxOpticsOCh2TraceToneCfgDestId | read-write | obsolete | This is the destination Id of the link ID/ the chassis and the blade. The transmit messages will also have the src id which is this chassis id and this port in… |
| 1.3.6.1.4.1.2636.3.71.1.4.2.1.9 | ColumnjnxOpticsOCh2TraceToneCfgTxMsg | read-write | obsolete | This will be the transmit data in the tracetone message. |
| 1.3.6.1.4.1.2636.3.71.1.4.2.1.10 | ColumnjnxOpticsOCh2TraceToneCfgRxMsg | read-only | obsolete | This will be the receive data in the trace tone message. |
| 1.3.6.1.4.1.2636.3.71.1.5 | NodejnxIplcAlarm | |||
| 1.3.6.1.4.1.2636.3.71.1.5.1 | TablejnxIplcNotificationTable | not-accessible | current | A table of Notification entries. |
| 1.3.6.1.4.1.2636.3.71.1.5.1.1 | RowjnxIplcNotificationEntry | not-accessible | current | A conceptual entry in the Notification table. |
| 1.3.6.1.4.1.2636.3.71.1.5.1.1.1 | ColumnjnxIplcNotificationLocation | accessible-for-notify | current | The object identifies indicates if this entry was for Near end/Far end. |
| 1.3.6.1.4.1.2636.3.71.1.5.1.1.2 | ColumnjnxIplcNotificationDirection | accessible-for-notify | current | The object identifies indicates if this entry was for for the Tx/Rx or both. |
| 1.3.6.1.4.1.2636.3.71.1.5.1.1.3 | ColumnjnxIplcNotificationSlot | accessible-for-notify | current | The object identifies indicates if this entry was for slot id. |
| 1.3.6.1.4.1.2636.3.71.1.5.1.1.4 | ColumnjnxIplcNotificationChannel | accessible-for-notify | current | The object identifies indicates if this entry was for Channel id. |
| 1.3.6.1.4.1.2636.3.71.1.5.1.1.5 | ColumnjnxIplcLastNotificationId | accessible-for-notify | current | The object identifies the IPLC alarm that most recently was set or cleared. |
| 1.3.6.1.4.1.2636.3.71.1.5.1.1.6 | ColumnjnxIplcNotificationSeverity | accessible-for-notify | current | The object identifies the severity of the last alarm/alert that most recently was set or cleared. |
| 1.3.6.1.4.1.2636.3.71.1.5.1.1.7 | ColumnjnxIplcNotificationDate | accessible-for-notify | current | This specifies the date and time when this alarm occurred. |
| 1.3.6.1.4.1.2636.3.71.1.6 | NodejnxIlaAlarm | |||
| 1.3.6.1.4.1.2636.3.71.1.6.1 | TablejnxIlaNotificationTable | not-accessible | current | A table of Notification entries. |
| 1.3.6.1.4.1.2636.3.71.1.6.1.1 | RowjnxIlaNotificationEntry | not-accessible | current | A conceptual entry in the Notification table. |
| 1.3.6.1.4.1.2636.3.71.1.6.1.1.1 | ColumnjnxIlaNotificationLocation | accessible-for-notify | current | The object identifies indicates if this entry was for Near end/Far end. |
| 1.3.6.1.4.1.2636.3.71.1.6.1.1.2 | ColumnjnxIlaNotificationDirection | accessible-for-notify | current | The object identifies indicates if this entry was for for the Tx/Rx or both. |
| 1.3.6.1.4.1.2636.3.71.1.6.1.1.3 | ColumnjnxIlaNotificationSlot | accessible-for-notify | current | The object identifies indicates if this entry was for slot id. |
| 1.3.6.1.4.1.2636.3.71.1.6.1.1.4 | ColumnjnxIlaNotificationIlaID | accessible-for-notify | current | The object identifies indicates if this entry was for the ILA id. |
| 1.3.6.1.4.1.2636.3.71.1.6.1.1.5 | ColumnjnxIlaLastNotificationId | accessible-for-notify | current | The object identifies the Ila alarm that most recently was set or cleared. |
| 1.3.6.1.4.1.2636.3.71.1.6.1.1.6 | ColumnjnxIlaNotificationSeverity | accessible-for-notify | current | The object identifies the severity of the last alarm/alert that most recently was set or cleared. |
| 1.3.6.1.4.1.2636.3.71.1.6.1.1.7 | ColumnjnxIlaNotificationDate | accessible-for-notify | current | This specifies the date and time when this alarm occurred. |
| 1.3.6.1.4.1.2636.4.22.0 | NodejnxOpticsNotificationPrefix | |||
| 1.3.6.1.4.1.2636.4.22.0.1 | NotificationjnxOpticsNotificationSet | current | Notification of a recently set optics alarm. | |
| 1.3.6.1.4.1.2636.4.22.0.2 | NotificationjnxOpticsNotificationCleared | current | Notification of a recently cleared optics alarm. | |
| 1.3.6.1.4.1.2636.4.22.0.3 | NotificationjnxIfOpticsNotificationAdminStatus | current | Notification of the admin state of the optics interface. | |
| 1.3.6.1.4.1.2636.4.22.0.4 | NotificationjnxIfOpticsNotificationOperStatus | current | Notification of operational state of the optics interface | |
| 1.3.6.1.4.1.2636.4.28.0 | NodejnxIplcNotificationPrefix | |||
| 1.3.6.1.4.1.2636.4.28.0.1 | NotificationjnxIplcNotificationSet | current | Notification of a recently set iplc alarm. | |
| 1.3.6.1.4.1.2636.4.28.0.2 | NotificationjnxIplcNotificationCleared | current | Notification of a recently cleared iplc alarm. | |
| 1.3.6.1.4.1.2636.4.29.0 | NodejnxIlaNotificationPrefix | |||
| 1.3.6.1.4.1.2636.4.29.0.1 | NotificationjnxIlaNotificationSet | current | Notification of a recently set iplc alarm. | |
| 1.3.6.1.4.1.2636.4.29.0.2 | NotificationjnxIlaNotificationCleared | current | Notification of a recently cleared iplc alarm. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JnxIlaNotificationId | INTEGER { jnxIlaBoardTemperatureAbnormalAlarm(1), jnxIlaPower0AbnormalAlarm(2), jnxIlaPower1AbnormalAlarm(3), jnxIlaFan0MissingAlarm(4), jnxIlaFan1MissingAlarm(5), jnxIlaFan2MissingAlarm(6), jnxIlaFan0SpeedAbnormalAlarm(7), jnxIlaFan1SpeedAbnormalAlarm(8), jnxIlaFan2SpeedAbnormalAlarm(9), jnxIlaSoftwareVersionAbnormalAlarm(10), jnxIlaCommunicationAbnormalAlarm(11), jnxIlaTableErrAlarm(12), jnxIlaEdfaEabCaseTemperatureAlarm(13), jnxIlaEdfaEabRFLAlarm(14), jnxIlaEdfaEabOOPAlarm(15), jnxIlaEdfaEabOOGAlarm(16), jnxIlaEdfaEabPump0EOLAlarm(17), jnxIlaEdfaEabPump1EOLAlarm(18), jnxIlaEdfaEabPump0TemperatureAlarm(19), jnxIlaEdfaEabPump1TemperatureAlarm(20), jnxIlaEdfaEabInputLOSAlarm(21), jnxIlaEdfaEabOutputLOSAlarm(22), jnxIlaEdfaEabCaliTableErrAlarm(23), jnxIlaEdfaEbaCaseTemperatureAlarm(24), jnxIlaEdfaEbaRFLAlarm(25), jnxIlaEdfaEbaOOPAlarm(26), jnxIlaEdfaEbaOOGAlarm(27), jnxIlaEdfaEbaPump0EOLAlarm(28), jnxIlaEdfaEbaPump1EOLAlarm(29), jnxIlaEdfaEbaPump0TemperatureAlarm(30), jnxIlaEdfaEbaPump1TemperatureAlarm(31), jnxIlaEdfaEbaInputLOSAlarm(32), jnxIlaEdfaEbaOutputLOSAlarm(33), jnxIlaEdfaEbaCaliTableErrAlarm(34), jnxIlaOscaAddPowerLOSAlarm(35), jnxIlaOscaDropPowerLOSAlarm(36), jnxIlaOscbAddPowerLOSAlarm(37), jnxIlaOscbDropPowerLOSAlarm(38), jnxIlaOscATxPwrLow15minAlert(39), jnxIlaOscATxPwrHigh15minAlert(40), jnxIlaOscARxPwrLow15minAlert(41), jnxIlaOscARxPwrHigh15minAlert(42), jnxIlaOscAFibLossLow15minAlert(43), jnxIlaOscAFibLossHigh15minAlert(44), jnxIlaVoaALineOutLow15minAlert(45), jnxIlaVoaALineOutHigh15minAlert(46), jnxIlaOscBTxPwrLow15minAlert(47), jnxIlaOscBTxPwrHigh15minAlert(48), jnxIlaOscBRxPwrLow15minAlert(49), jnxIlaOscBRxPwrHigh15minAlert(50), jnxIlaOscBFibLossLow15minAlert(51), jnxIlaOscBFibLossHigh15minAlert(52), jnxIlaVoaBLineOutLow15minAlert(53), jnxIlaVoaBLineOutHigh15minAlert(54), jnxIlaEdfaABInputPwrLow15minAlert(55), jnxIlaEdfaABInputPwrHigh15minAlert(56), jnxIlaEdfaABOutputPwrLow15minAlert(57), jnxIlaEdfaABOutputPwrHigh15minAlert(58), jnxIlaEdfaABPump0CurLow15minAlert(59), jnxIlaEdfaABPump0CurHigh15minAlert(60), jnxIlaEdfaABPump1CurLow15minAlert(61), jnxIlaEdfaABPump1CurHigh15minAlert(62), jnxIlaEdfaABPump0TempLow15minAlert(63), jnxIlaEdfaABPump0TempHigh15minAlert(64), jnxIlaEdfaABPump1TempLow15minAlert(65), jnxIlaEdfaABPump1TempHigh15minAlert(66), jnxIlaEdfaBAInputPwrLow15minAlert(67), jnxIlaEdfaBAInputPwrHigh15minAlert(68), jnxIlaEdfaBAOutputPwrLow15minAlert(69), jnxIlaEdfaBAOutputPwrHigh15minAlert(70), jnxIlaEdfaBAPump0CurLow15minAlert(71), jnxIlaEdfaBAPump0CurHigh15minAlert(72), jnxIlaEdfaBAPump1CurLow15minAlert(73), jnxIlaEdfaBAPump1CurHigh15minAlert(74), jnxIlaEdfaBAPump0TempLow15minAlert(75), jnxIlaEdfaBAPump0TempHigh15minAlert(76), jnxIlaEdfaBAPump1TempLow15minAlert(77), jnxIlaEdfaBAPump1TempHigh15minAlert(78), jnxIla24HourOscATxPwrLowAlert(79), jnxIla24HourOscATxPwrHighAlert(80), jnxIla24HourOscARxPwrLowAlert(81), jnxIla24HourOscARxPwrHighAlert(82), jnxIla24HourOscAFibLossLowAlert(83), jnxIla24HourOscAFibLossHighAlert(84), jnxIla24HourVoaALineOutLowAlert(85), jnxIla24HourVoaALineOutHighAlert(86), jnxIla24HourOscBTxPwrLowAlert(87), jnxIla24HourOscBTxPwrHighAlert(88), jnxIla24HourOscBRxPwrLowAlert(89), jnxIla24HourOscBRxPwrHighAlert(90), jnxIla24HourOscBFibLossLowAlert(91), jnxIla24HourOscBFibLossHighAlert(92), jnxIla24HourVoaBLineOutLowAlert(93), jnxIla24HourVoaBLineOutHighAlert(94), jnxIla24HourEdfaABInputPwrLowAlert(95), jnxIla24HourEdfaABInputPwrHighAlert(96), jnxIla24HourEdfaABOutputPwrLowAlert(97), jnxIla24HourEdfaABOutputPwrHighAlert(98), jnxIla24HourEdfaABPump0CurLowAlert(99), jnxIla24HourEdfaABPump0CurHighAlert(100), jnxIla24HourEdfaABPump1CurLowAlert(101), jnxIla24HourEdfaABPump1CurHighAlert(102), jnxIla24HourEdfaABPump0TempLowAlert(103), jnxIla24HourEdfaABPump0TempHighAlert(104), jnxIla24HourEdfaABPump1TempLowAlert(105), jnxIla24HourEdfaABPump1TempHighAlert(106), jnxIla24HourEdfaBAInputPwrLowAlert(107), jnxIla24HourEdfaBAInputPwrHighAlert(108), jnxIla24HourEdfaBAOutputPwrLowAlert(109), jnxIla24HourEdfaBAOutputPwrHighAlert(110), jnxIla24HourEdfaBAPump0CurLowAlert(111), jnxIla24HourEdfaBAPump0CurHighAlert(112), jnxIla24HourEdfaBAPump1CurLowAlert(113), jnxIla24HourEdfaBAPump1CurHighAlert(114), jnxIla24HourEdfaBAPump0TempLowAlert(115), jnxIla24HourEdfaBAPump0TempHighAlert(116), jnxIla24HourEdfaBAPump1TempLowAlert(117), jnxIla24HourEdfaBAPump1TempHighAlert(118), jnxIlaEdfaABSignalPwrLow15minAlert(119), jnxIlaEdfaABSignalPwrHigh15minAlert(120), jnxIla24HourEdfaABSignalPwrLowAlert(121), jnxIla24HourEdfaABSignalPwrHighAlert(122), jnxIlaEdfaBASignalPwrLow15minAlert(123), jnxIlaEdfaBASignalPwrHigh15minAlert(124), jnxIla24HourEdfaBASignalPwrLowAlert(125), jnxIla24HourEdfaBASignalPwrHighAlert(126), jnxIlaEdfaABGainRangeErrAlarm(127), jnxIlaEdfaBAGainRangeErrAlarm(128) } | current | Ila alarm types |
| JnxIplcNotificationId | INTEGER { jnxIplcFpcAwgAddLosAlarm(1), jnxIplcFpcExpInLosAlarm(2), jnxIplcFpcOscAddLosAlarm(3), jnxIplcFpcOscDrpLosAlarm(4), jnxIplcFpcLineInLosAlarm(5), jnxIplcFpcEdfa1RefPwAlarm(6), jnxIplcFpcEdfa1OutPwAlarm(7), jnxIplcFpcEdfa1OutGain(8), jnxIplcFpcEdfa1PumpEolAlarm(9), jnxIplcFpcEdfa1TempAlarm(10), jnxIplcFpcEdfa1OutLosAlarm(11), jnxIplcFpcEdfa1InLosAlarm(12), jnxIplcFpcEdfa2RefPwAlarm(13), jnxIplcFpcEdfa2OutPwAlarm(14), jnxIplcFpcEdfa2OutGainAlarm(15), jnxIplcFpcEdfa2PumpEolAlarm(16), jnxIplcFpcEdfa2TempAlarm(17), jnxIplcFpcEdfa2OutLosAlarm(18), jnxIplcFpcEdfa2InLosAlarm(19), jnxIplcFpcWssTempAlarm(20), jnxIplcFpcWssVoltAlarm(21), jnxIplcFpcInterDiagAlarm(22), jnxIplcFpcFwCnsistAlarm(23), jnxIplcFpcHwFailAlarm(24), jnxIplcFpcFwFailAlarm(25), jnxIplcFpcOcmFailAlarm(26), jnxIplcFpcWssFailAlarm(27), jnxIplcFpcEdfa2FailAlarm(28), jnxIplcFpcEdfa1FailAlarm(29), jnxIplcFpcPwrFailAlarm(30), jnxIplcOscTxPowerHigh15minAlert(31), jnxIplcOscTxPowerLow15minAlert(32), jnxIplcOscRxPowerHigh15minAlert(33), jnxIplcOscRxPowerLow15minAlert(34), jnxIplcOscFiberLosHigh15minAlert(35), jnxIplcOscFiberLosLow15minAlert(36), jnxIplcLineOutVoaHigh15minAlert(37), jnxIplcLineOutVoaLow15minAlert(38), jnxIplcIngressEdfaInputPwHigh15minAlert(39), jnxIplcIngressEdfaInputPwLow15minAlert(40), jnxIplcIngressEdfaOutputPwHigh15minAlert(41), jnxIplcIngressEdfaOutputPwLow15minAlert(42), jnxIplcIngressEdfaSignalPwHigh15minAlert(43), jnxIplcIngressEdfaSignalPwLow15minAlert(44), jnxIplcIngressEdfaPumpCurrentHigh15minAlert(45), jnxIplcIngressEdfaPumpCurrentLow15minAlert(46), jnxIplcEgressEdfaInputPwHigh15minAlert(47), jnxIplcEgressEdfaInputPwLow15minAlert(48), jnxIplcEgressEdfaOutputPwHigh15minAlert(49), jnxIplcEgressEdfaOutputPwLow15minAlert(50), jnxIplcEgressEdfaSignalPwHigh15minAlert(51), jnxIplcEgressEdfaSignalPwLow15minAlert(52), jnxIplcEgressEdfaPumpCurrentHigh15minAlert(53), jnxIplcEgressEdfaPumpCurrentLow15minAlert(54), jnxIplcPowerMonitorAwgAddHigh15minAlert(55), jnxIplcPowerMonitorAwgAddLow15minAlert(56), jnxIplcPowerMonitorExpressInHigh15minAlert(57), jnxIplcPowerMonitorExpressInLow15minAlert(58), jnxIplcOcmPwHigh15minAlert(59), jnxIplcOcmPwLow15minAlert(60), jnxIplcOscTxPowerHigh24hourAlert(61), jnxIplcOscTxPowerLow24hourAlert(62), jnxIplcOscRxPowerHigh24hourAlert(63), jnxIplcOscRxPowerLow24hourAlert(64), jnxIplcOscFiberLosHigh24hourAlert(65), jnxIplcOscFiberLosLow24hourAlert(66), jnxIplcLineOutVoaHigh24hourAlert(67), jnxIplcLineOutVoaLow24hourAlert(68), jnxIplcIngressEdfaInputPwHigh24hourAlert(69), jnxIplcIngressEdfaInputPwLow24hourAlert(70), jnxIplcIngressEdfaOutputPwHigh24hourAlert(71), jnxIplcIngressEdfaOutputPwLow24hourAlert(72), jnxIplcIngressEdfaSignalPwHigh24hourAlert(73), jnxIplcIngressEdfaSignalPwLow24hourAlert(74), jnxIplcIngressEdfaPumpCurrentHigh24hourAlert(75), jnxIplcIngressEdfaPumpCurrentLow24hourAlert(76), jnxIplcEgressEdfaInputPwHigh24hourAlert(77), jnxIplcEgressEdfaInputPwLow24hourAlert(78), jnxIplcEgressEdfaOutputPwHigh24hourAlert(79), jnxIplcEgressEdfaOutputPwLow24hourAlert(80), jnxIplcEgressEdfaSignalPwHigh24hourAlert(81), jnxIplcEgressEdfaSignalPwLow24hourAlert(82), jnxIplcEgressEdfaPumpCurrentHigh24hourAlert(83), jnxIplcEgressEdfaPumpCurrentLow24hourAlert(84), jnxIplcPowerMonitorAwgAddHigh24hourAlert(85), jnxIplcPowerMonitorAwgAddLow24hourAlert(86), jnxIplcPowerMonitorExpressInHigh24hourAlert(87), jnxIplcPowerMonitorExpressInLow24hourAlert(88), jnxIplcOcmPwHigh24hourAlert(89), jnxIplcOcmPwLow24hourAlert(90), jnxIplcFpcSfpLosAlarm(91), jnxIplcFpcSfpLofAlarm(92) } | current | Iplc alarm types |
| JnxOpticsChannelSpacing | INTEGER { spacing100Ghz(1), spacing50Ghz(2), spacing25Ghz(3), spacing12point5Ghz(4), spacing6point5Ghz(5) } | current | Channel spacing 1 - 100 Ghz 2 - 50 GHz 3 - 25 GHz 4 - 12.5 GHz 5 - 6.25 Ghz |
| JnxOpticsDirection | INTEGER { jnxTxDir(1), jnxRxDir(2), jnxBiDir(3) } | current | Indicates the direction as Rx/Tx or bi-directional. |
| JnxOpticsLocation | INTEGER { jnxNearEnd(1), jnxFarEnd(2) } | current | Near End or Far End |
| JnxOpticsNotificationId | INTEGER { jnxOpticsLOS(1), jnxOpticsWavelenthLockErr(2), jnxOpticsPowerHighAlarm(3), jnxOpticsPowerLowAlarm(4), jnxOpticsBiasCurrentHighAlarm(5), jnxOpticsBiasCurrentLowAlarm(6), jnxOpticsTemperatureHighAlarm(7), jnxOpticsTemperaturelowAlarm(8), jnxOpticsTxPLLLockAlarm(9), jnxOpticsRxPLLLockAlarm(10), jnxOpticsAvgPowerAlarm(11), jnxOpticsRxLossAvgPowerAlarm(12), jnxOpticsLossofACPowerAlarm(13), jnxOpticsTxPowerHighThreshAlert(14), jnxOpticsTxPowerLowThreshAlert(15), jnxOpticsRxPowerHighThreshAlert(16), jnxOpticsRxPowerLowThreshAlert(17), jnxOpticsModuleTempHighThreshAlert(18), jnxOpticsModuleTempLowThreshAlert(19), jnxOptics24HourTxPowerHighThreshAlert(20), jnxOptics24HourTxPowerLowThreshAlert(21), jnxOptics24HourRxPowerHighThreshAlert(22), jnxOptics24HourRxPowerLowThreshAlert(23), jnxOptics24HourModuleTempHighThreshAlert(24), jnxOptics24HourModuleTempLowThreshAlert(25), jnxOpticsRxPowerHighAlarm(26), jnxOpticsRxPowerLowAlarm(27), jnxOpticsTxPowerHighWarning(28), jnxOpticsTxPowerLowWarning(29), jnxOpticsRxPowerHighWarning(30), jnxOpticsRxPowerLowWarning(31), jnxOpticsModuleTempHighWarning(32), jnxOpticsModuleTempLowWarning(33), jnxOpticsRxCarrierFreqHigh(34), jnxOpticsRxCarrierFreqLow(35), jnxOpticsChromaticDispHighWarning(36), jnxOpticsChromaticDispLowWarning(37), jnxOpticsQLowWarning(38), jnxOpticsOSNRLowWarning(39), jnxOpticsCarrierFreqHighAlert(40), jnxOpticsCarrierFreqLowAlert(41), jnxOptics24HourCarrierFreqHighAlert(42), jnxOptics24HourCarrierFreqLowAlert(43), jnxOpticsLossOfLock(44), jnxOpticsLossOfSignal(45), jnxOpticsLossOfFrame(46), jnxOpticsLossOfMultiFrame(47), jnxOpticsOTUBDI(48), jnxOpticsRxModemSYncFault(49), jnxOpticsRxModemLOL(50), jnxOpticsRxLOA(51), jnxOpticsModBiasControlLoopFail(52), jnxOpticsILTAfault(53), jnxOpticsDACcalibrationfault(54), jnxOpticsADCcalibrationfault(55), jnxOpticsTecCurrentHighAlert(56), jnxOpticsTecCurrentLowAlert(57), jnxOpticsPamHistogramHighAlert(58), jnxOpticsResidualIsiHighAlert(59), jnxOpticsResidualIsiLowAlert(60), jnxOpticsFecCorrectedErrorsHighAlert(61), jnxOpticsFecUCorrectedWordsHighAlert(62), jnxOptics24HourTecCurrentHighAlert(63), jnxOptics24HourTecCurrentLowAlert(64), jnxOptics24HourPamHistogramHighAlert(65), jnxOptics24HourResidualIsiHighAlert(66), jnxOptics24HourResidualIsiLowAlert(67), jnxOptics24HourFecCorrectedErrorsHighAlert(68), jnxOptics24HourFecUCorrectedWordsHighAlert(69), jnxOpticsLaserFreqErrorHighAlert(70), jnxOpticsLaserFreqErrorLowAlert(71), jnxOptics24HourLaserFreqErrorHighAlert(72), jnxOptics24HourLaserFreqErrorLowAlert(73), jnxOpticsSnrLowAlert(74), jnxOptics24HourSnrLowAlert(75), jnxOpticsPreFecBERHighAlert(76), jnxOptics24HourPreFecBERHignAlert(77), jnxOpticsRxSignalPowerHighThreshAlert(78), jnxOpticsRxSignalPowerLowThreshAlert(79), jnxOptics24HourRxSignalPowerHighThreshAlert(80), jnxOptics24HourRxSignalPowerLowThreshAlert(81) } | current | Optic alarm types |
| JnxOpticsOTIfAdminStates | INTEGER { jnxAdminStateInService(1), jnxAdminStateInServiceMA(2), jnxAdminStateOutofService(3), jnxAdminStateOutofServiceMA(4) } | current | Admin states for an interface |
| JnxOpticsOTIfEncodingOptions | INTEGER { unknown (0), differential(1), non-differential(2) } | current | Encoding Options supported on OT interface |
| JnxOpticsOTIfFecType | INTEGER { none(0), sdfec(1), sdfec25(2), hgfec(3), sdfec15(4) } | current | fec modes of an interface OT interface |
| JnxOpticsOTIfOperStates | INTEGER { jnxOperStateInit(1), jnxOperStateNormal(2), jnxOperStateFault(3), jnxOperStateDegraded(4) } | current | Operational states for an interface |
| JnxOpticsServiceStateAction | INTEGER { jnxNotSupported(0), jnxNonServiceAffecting(1), jnxServiceAffecting(2) } | current | Notification's action on the service state |
| JnxOpticsSeverity | INTEGER { jnxCritical(1), jnxMajor(2), jnxMinor(3), jnxInfo(4) } | current | Severity of the Notification |
| JnxOpticsSuspectReason | INTEGER { notApplicable(0), unknown(1), newObject(2), interfaceDisabled(3), clockShiftDetected(4), userCleared(5), insufficientSampling(6), missingSubIntervals(7), monitoringDisruption(8), dataNotAvailable(9) } | current | Reason for why PM bin validity is suspect |