JUNIPER-IFOTN-MIB
193 objects
Deprecated OCh2 tables and entries
Imported Objects
| IF-MIB | ifDescr ifIndex |
| JNX-OPT-IF-EXT-MIB | JnxoptIfOTNOChAlarms JnxoptIfOTNODUkTcmAlarms |
| JUNIPER-SMI | jnxIfOtnMibRoot jnxIfOtnNotifications |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.70.1 | IdentityjnxIfOtnMib | Deprecated OCh2 tables and entries | ||
| 1.3.6.1.4.1.2636.3.70.1.1 | NodejnxIfOtn | |||
| 1.3.6.1.4.1.2636.3.70.1.1.1 | TablejnxIfOtnOChCfgTable | not-accessible | current | Information about the Otn OCh Config Table. |
| 1.3.6.1.4.1.2636.3.70.1.1.1.1 | RowjnxIfOtnOChCfgEntry | not-accessible | current | A conceptual row that contains of the Otn OCh Config Table. |
| 1.3.6.1.4.1.2636.3.70.1.1.1.1.1 | ColumnjnxIfOtnOChCfgContainerIndex | not-accessible | current | The associated jnxContentsContainerIndex - eg shelf.. |
| 1.3.6.1.4.1.2636.3.70.1.1.1.1.2 | ColumnjnxIfOtnOChCfgL1Index | not-accessible | current | The level one index associated with this subject ... eg fpc slot. |
| 1.3.6.1.4.1.2636.3.70.1.1.1.1.3 | ColumnjnxIfOtnOChCfgL2Index | not-accessible | current | The level two index associated with this subject .. eg pic slot. |
| 1.3.6.1.4.1.2636.3.70.1.1.1.1.4 | ColumnjnxIfOtnOChCfgL3Index | not-accessible | current | The level three index associated with this subject.. eg port. |
| 1.3.6.1.4.1.2636.3.70.1.1.1.1.5 | ColumnjnxIfOtnLocalLoopback | read-write | current | This is the local loopback at the Line (after the optics). |
| 1.3.6.1.4.1.2636.3.70.1.1.1.1.6 | ColumnjnxIfOtnLineLoopback | read-write | current | This is the line loopback at the Line. |
| 1.3.6.1.4.1.2636.3.70.1.1.1.1.7 | ColumnjnxIfOtnPayloadLoopback | read-write | current | This is the Payload loopback before the optics. |
| 1.3.6.1.4.1.2636.3.70.1.1.1.1.8 | ColumnjnxIfOtnAdminState | read-write | current | The Admin state of this interface |
| 1.3.6.1.4.1.2636.3.70.1.1.1.1.9 | ColumnjnxIfOtnOperState | read-only | current | The operational state of this interface |
| 1.3.6.1.4.1.2636.3.70.1.1.1.1.10 | ColumnjnxIfOtnIndex | read-only | current | The interface ifIndex of this interface |
| 1.3.6.1.4.1.2636.3.70.1.1.1.1.11 | ColumnjnxIfOtnOChStatus | read-only | current | The interface status at the OCh layer. |
| 1.3.6.1.4.1.2636.3.70.1.1.1.1.12 | ColumnjnxIfOtnOChPortMode | read-only | current | The Port Mode for this interface 0 - default (not applicable) 1 - lan 2 - wan 3 - gfp |
| 1.3.6.1.4.1.2636.3.70.1.1.2 | TablejnxIfOtnOTUkCfgTable | not-accessible | current | Information about the Otn OTUk config table. |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1 | RowjnxIfOtnOTUkCfgEntry | not-accessible | current | A conceptual row that contains the Otn OTUk config table. |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.1 | ColumnjnxIfOtnOTUkCfgContainerIndex | not-accessible | current | The associated jnxContentsContainerIndex - eg shelf. |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.2 | ColumnjnxIfOtnOTUkCfgL1Index | not-accessible | current | The level one index associated with this subject ... eg fpc slot. |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.3 | ColumnjnxIfOtnOTUkCfgL2Index | not-accessible | current | The level two index associated with this subject .. eg pic slot. |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.4 | ColumnjnxIfOtnOTUkCfgL3Index | not-accessible | current | The level three index associated with this subject.. eg port. |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.5 | ColumnjnxIfOtnOTUkCfgRate | read-write | current | This is the rate for the interface and the rates depend on the interface/fru type. |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.6 | ColumnjnxIfOtnOTUkCfgFecMode | read-write | current | This is the Fec type in the OTU frame and the selection depends on the interface/fru type. |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.7 | ColumnjnxIfOtnOTUkEnableAutoFrrByteInsert | read-write | current | This will enable/disable the automatic insertion of the frr SF/SD byte in the overhead bytes(RES) |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.8 | ColumnjnxIfOtnOTUkEnableBERFrrSupport | read-write | current | This will enable/disable the FRR support for BER |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.9 | ColumnjnxIfOtnOTUkPreFecBERThresholdMantissa | read-write | current | This will set the BER threshold(mantissa), which when crossed will trigger Signal Degrade. |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.10 | ColumnjnxIfOtnOTUkPreFecBERThresholdExponent | read-write | current | This will set the BER threshold(exponent), which when crossed will trigger Signal Degrade. |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.11 | ColumnjnxIfOtnOTUkPreFecBERThresholdTime | read-write | current | The collection times (1ms - 1sec) to calculate the BER. |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.12 | ColumnjnxIfOtnOTUkTIMActEnabled | read-write | current | Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. The default value of this object is false(2). |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.13 | ColumnjnxIfOtnOTUkTxTTI | read-write | current | The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.14 | ColumnjnxIfOtnOTUkRxTTI | read-only | current | The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.15 | ColumnjnxIfOtnOTUkExpectedRxSapi | read-write | current | Expected receive SAPI. |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.16 | ColumnjnxIfOtnOTUkExpectedRxDapi | read-write | current | Expected receive DAPI. |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.17 | ColumnjnxIfOtnOTUkStatus | read-only | current | The interface status at the OTUk layer. |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.18 | ColumnjnxIfOtnOTUkPreFecBERThresholdClearMantissa | read-write | current | This will set the BER threshold(mantissa) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below … |
| 1.3.6.1.4.1.2636.3.70.1.1.2.1.19 | ColumnjnxIfOtnOTUkPreFecBERThresholdClearExponent | read-write | current | This will set the BER threshold(exponent) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below … |
| 1.3.6.1.4.1.2636.3.70.1.1.3 | TablejnxIfOtnODUkCfgTable | not-accessible | current | Information about the Otn ODUk config table. |
| 1.3.6.1.4.1.2636.3.70.1.1.3.1 | RowjnxIfOtnODUkCfgEntry | not-accessible | current | A conceptual row that contains information about the Otn ODUk config. |
| 1.3.6.1.4.1.2636.3.70.1.1.3.1.1 | ColumnjnxIfOtnODUkCfgContainerIndex | not-accessible | current | The associated jnxContentsContainerIndex - eg shelf.. |
| 1.3.6.1.4.1.2636.3.70.1.1.3.1.2 | ColumnjnxIfOtnODUkCfgL1Index | not-accessible | current | The level one index associated with this subject ... eg fpc slot. |
| 1.3.6.1.4.1.2636.3.70.1.1.3.1.3 | ColumnjnxIfOtnODUkCfgL2Index | not-accessible | current | The level two index associated with this subject .. eg pic slot. |
| 1.3.6.1.4.1.2636.3.70.1.1.3.1.4 | ColumnjnxIfOtnODUkCfgL3Index | not-accessible | current | The level three index associated with this subject.. eg port. |
| 1.3.6.1.4.1.2636.3.70.1.1.3.1.5 | ColumnjnxIfOtnODUkAPSPCC0 | read-write | current | Read/Write APS PCC byte 0 for this ODUk only. |
| 1.3.6.1.4.1.2636.3.70.1.1.3.1.6 | ColumnjnxIfOtnODUkAPSPCC1 | read-write | current | Read/Write APS PCC byte 1 for this ODUk only. |
| 1.3.6.1.4.1.2636.3.70.1.1.3.1.7 | ColumnjnxIfOtnODUkAPSPCC2 | read-write | current | Read/Write APS PCC byte 2 for this ODUk only. |
| 1.3.6.1.4.1.2636.3.70.1.1.3.1.8 | ColumnjnxIfOtnODUkAPSPCC3 | read-write | current | Read/Write APS PCC byte 3 for this ODUk only. |
| 1.3.6.1.4.1.2636.3.70.1.1.3.1.9 | ColumnjnxIfOtnODUkPayloadType | read-write | current | Read/Write Payload Type for ODUk only. |
| 1.3.6.1.4.1.2636.3.70.1.1.3.1.10 | ColumnjnxIfOtnODUkTIMActEnabled | read-write | current | Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. The default value of this object is false(2). |
| 1.3.6.1.4.1.2636.3.70.1.1.3.1.11 | ColumnjnxIfOtnODUkTxTTI | read-write | current | The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer. |
| 1.3.6.1.4.1.2636.3.70.1.1.3.1.12 | ColumnjnxIfOtnODUkRxTTI | read-only | current | The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer. |
| 1.3.6.1.4.1.2636.3.70.1.1.3.1.13 | ColumnjnxIfOtnODUkExpectedRxSapi | read-write | current | Expected receive SAPI for this layer. |
| 1.3.6.1.4.1.2636.3.70.1.1.3.1.14 | ColumnjnxIfOtnODUkExpectedRxDapi | read-write | current | Expected receive DAPI for this layer. |
| 1.3.6.1.4.1.2636.3.70.1.1.3.1.15 | ColumnjnxIfOtnODUkStatus | read-only | current | The status at the ODUk layer Only some of these alarms are valid for the TCM layer |
| 1.3.6.1.4.1.2636.3.70.1.1.3.1.16 | ColumnjnxIfOtnODUkRxPayloadType | read-only | current | Receive Payload Type for ODUk only. |
| 1.3.6.1.4.1.2636.3.70.1.1.4 | TablejnxIfOtnTcmCfgTable | not-accessible | current | Information about the Otn TCM config table. |
| 1.3.6.1.4.1.2636.3.70.1.1.4.1 | RowjnxIfOtnTcmCfgEntry | not-accessible | current | A conceptual row that contains information about the Otn Tcm config. |
| 1.3.6.1.4.1.2636.3.70.1.1.4.1.1 | ColumnjnxIfOtnTcmCfgContainerIndex | not-accessible | current | The associated jnxContentsContainerIndex - eg shelf. |
| 1.3.6.1.4.1.2636.3.70.1.1.4.1.2 | ColumnjnxIfOtnTcmCfgL1Index | not-accessible | current | The level one index associated with this subject ... eg fpc slot. |
| 1.3.6.1.4.1.2636.3.70.1.1.4.1.3 | ColumnjnxIfOtnTcmCfgL2Index | not-accessible | current | The level two index associated with this subject .. eg pic slot. |
| 1.3.6.1.4.1.2636.3.70.1.1.4.1.4 | ColumnjnxIfOtnTcmCfgL3Index | not-accessible | current | The level three index associated with this subject.. eg port. |
| 1.3.6.1.4.1.2636.3.70.1.1.4.1.5 | ColumnjnxIfOtnTcmCfgLevel | not-accessible | current | The TCM level for the Table |
| 1.3.6.1.4.1.2636.3.70.1.1.4.1.6 | ColumnjnxIfOtnTCMEnable | read-write | current | Enable this TCM layer (only for TCM layers) |
| 1.3.6.1.4.1.2636.3.70.1.1.4.1.7 | ColumnjnxIfOtnTcmTxTTI | read-write | current | The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer. |
| 1.3.6.1.4.1.2636.3.70.1.1.4.1.8 | ColumnjnxIfOtnTcmRxTTI | read-only | current | The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer. |
| 1.3.6.1.4.1.2636.3.70.1.1.4.1.9 | ColumnjnxIfOtnTcmExpectedRxSapi | read-write | current | Expected receive SAPI for this layer. |
| 1.3.6.1.4.1.2636.3.70.1.1.4.1.10 | ColumnjnxIfOtnTcmExpectedRxDapi | read-write | current | Expected receive DAPI for this layer. |
| 1.3.6.1.4.1.2636.3.70.1.1.4.1.11 | ColumnjnxIfOtnTcmStatus | read-only | current | The status at the TCM layer. |
| 1.3.6.1.4.1.2636.3.70.1.1.5 | TablejnxIfOtnODUkTcmTestTable | not-accessible | current | Information about the Otn ODUk Test function table. |
| 1.3.6.1.4.1.2636.3.70.1.1.5.1 | RowjnxIfOtnODUkTcmTestEntry | not-accessible | current | A conceptual row that contains information about the Otn ODUk Test function. |
| 1.3.6.1.4.1.2636.3.70.1.1.5.1.1 | ColumnjnxIfOtnODUkTcmTestLayer | not-accessible | current | The layer OTU/ODU/TCM layer for the alarm |
| 1.3.6.1.4.1.2636.3.70.1.1.5.1.2 | ColumnjnxIfOtnODUkTcmTestTCMLevel | not-accessible | current | For ODUk will be this will be 0 If layer is TCM then this will give the TCM level 1..6. |
| 1.3.6.1.4.1.2636.3.70.1.1.5.1.3 | ColumnjnxIfOtnODUkTcmInsertAis | read-write | current | Insert ODU Ais into OTN stream. |
| 1.3.6.1.4.1.2636.3.70.1.1.5.1.4 | ColumnjnxIfOtnODUkTcmInsertLck | read-write | current | Insert ODU Lck into OTN stream. |
| 1.3.6.1.4.1.2636.3.70.1.1.5.1.5 | ColumnjnxIfOtnODUkTcmInsertOci | read-write | current | Insert ODU Oci into OTN stream. |
| 1.3.6.1.4.1.2636.3.70.1.1.5.1.6 | ColumnjnxIfOtnODUkPayloadPRBS | read-write | current | Insert Payload PRBS, For ODUK layer and TCM level is 0. |
| 1.3.6.1.4.1.2636.3.70.1.1.5.1.7 | ColumnjnxIfOtnODUkPayloadPRBSResult | read-only | current | Result of the Payload PRBS . |
| 1.3.6.1.4.1.2636.3.70.1.1.6 | TablejnxIfOtnODUkTcmDMTable | not-accessible | current | Table for Otn ODUk/TCM Delay Measurement config table. |
| 1.3.6.1.4.1.2636.3.70.1.1.6.1 | RowjnxIfOtnODUkTcmDMEntry | not-accessible | current | A conceptual row that contains information about the Delay Measurement test table. |
| 1.3.6.1.4.1.2636.3.70.1.1.6.1.1 | ColumnjnxIfOtnODUkTcmDMLayer | not-accessible | current | The layer OTU/ODU/TCM layer for the alarm |
| 1.3.6.1.4.1.2636.3.70.1.1.6.1.2 | ColumnjnxIfOtnODUkTcmDMLevel | not-accessible | current | For ODUk will be this will be 0 If layer is TCM then this will give the TCM level 1..6. |
| 1.3.6.1.4.1.2636.3.70.1.1.6.1.3 | ColumnjnxIfOtnDMConnectionMonitoringEndpoint | read-write | current | Originate Connection Monitoring Endpoint for the Delay Measurement |
| 1.3.6.1.4.1.2636.3.70.1.1.6.1.4 | ColumnjnxIfOtnDMBypass | read-write | current | Act as tandem, passing Dm value through node |
| 1.3.6.1.4.1.2636.3.70.1.1.6.1.5 | ColumnjnxIfOtnDMPersistFrames | read-write | current | Number of consequtive frames required to declare Dm Complete |
| 1.3.6.1.4.1.2636.3.70.1.1.6.1.6 | ColumnjnxIfOtnDMEnable | read-write | current | Start/Stop the DM measurement |
| 1.3.6.1.4.1.2636.3.70.1.1.7 | ScalarjnxIfOtnNotificationTrigDefaultHoldtimeUp | read-write | current | This object will indicate the time (ms) for the defect to persist before it is declared an alarm. |
| 1.3.6.1.4.1.2636.3.70.1.1.8 | ScalarjnxIfOtnNotificationTrigDefaultHoldtimeDown | read-write | current | This object will indicate the time (ms) for the defect to absent before the alarm is cleared. |
| 1.3.6.1.4.1.2636.3.70.1.1.9 | TablejnxIfOtnNotificationTrigTable | not-accessible | current | Information about the otn Alarm/Alart/Info trigger table. |
| 1.3.6.1.4.1.2636.3.70.1.1.9.1 | RowjnxIfOtnNotificationTrigEntry | not-accessible | current | A conceptual row that contains information about the Otn Alarm Trigger Table. |
| 1.3.6.1.4.1.2636.3.70.1.1.9.1.1 | ColumnjnxIfOtnNotificationTrigContainerIndex | not-accessible | current | The associated jnxContentsContainerIndex - eg shelf. |
| 1.3.6.1.4.1.2636.3.70.1.1.9.1.2 | ColumnjnxIfOtnNotificationTrigL1Index | not-accessible | current | The level one index associated with this subject ... eg fpc slot. |
| 1.3.6.1.4.1.2636.3.70.1.1.9.1.3 | ColumnjnxIfOtnNotificationTrigL2Index | not-accessible | current | The level two index associated with this subject .. eg pic slot. |
| 1.3.6.1.4.1.2636.3.70.1.1.9.1.4 | ColumnjnxIfOtnNotificationTrigL3Index | not-accessible | current | The level three index associated with this subject.. eg port. |
| 1.3.6.1.4.1.2636.3.70.1.1.9.1.5 | ColumnjnxIfOtnNotificationTrigLayer | not-accessible | current | The layer OTU/ODU/TCM layer for the alarm |
| 1.3.6.1.4.1.2636.3.70.1.1.9.1.6 | ColumnjnxIfOtnNotificationTrigTCMLevel | not-accessible | current | For OCh/OTUk/ODUk will be this will be 0 If layer is TCM then this will give the TCM level 1..6. |
| 1.3.6.1.4.1.2636.3.70.1.1.9.1.7 | ColumnjnxIfOtnNotificationTrigAlmId | not-accessible | current | This will be the ID of Alarm for that layer 'JnxoptIfOTNOChAlarms'/'JnxoptIfOTNODUkTcmAlarms'. |
| 1.3.6.1.4.1.2636.3.70.1.1.9.1.8 | ColumnjnxIfOtnNotificationTrigSeverity | read-write | current | This will be the Severity of the Notification for that layer. |
| 1.3.6.1.4.1.2636.3.70.1.1.9.1.9 | ColumnjnxIfOtnNotificationTrigIgnore | read-write | current | This object will ignore the alarm when set. |
| 1.3.6.1.4.1.2636.3.70.1.1.9.1.10 | ColumnjnxIfOtnNotificationTrigHoldtimeUp | read-write | current | This object will indicate the time (ms) for the defect to persist before it is declared an alarm. |
| 1.3.6.1.4.1.2636.3.70.1.1.9.1.11 | ColumnjnxIfOtnNotificationTrigHoldtimeDown | read-write | current | This object will indicate the time (ms) for the defect is absent before the alarm is cleared. |
| 1.3.6.1.4.1.2636.3.70.1.1.9.1.12 | ColumnjnxIfOtnTrigServiceStateAction | read-only | current | This will indicate whether this alarm is service affecting or not . |
| 1.3.6.1.4.1.2636.3.70.1.1.10 | ScalarjnxOtnClearAllPMs | read-write | current | To clear all Performance monitoring counters on OTN interfaces |
| 1.3.6.1.4.1.2636.3.70.1.1.11 | ScalarjnxOtnClearInterfacePMs | read-write | current | To clear all Performance monitoring counters on this OTN interfaces |
| 1.3.6.1.4.1.2636.3.70.1.1.12 | ScalarjnxOtnClearInterfaceCurrentPM | read-write | current | To clear the current Performance monitoring counters on this OTN interfaces |
| 1.3.6.1.4.1.2636.3.70.1.1.13 | TablejnxOtnClearIfPMsTable | not-accessible | current | To clear OTN Performance monitoring counters on this OTN interfaces |
| 1.3.6.1.4.1.2636.3.70.1.1.13.1 | RowjnxOtnClearIfPMsEntry | not-accessible | current | A conceptual row that s used to clear the OTN PM Table. |
| 1.3.6.1.4.1.2636.3.70.1.1.13.1.1 | ColumnjnxOtnClearCurrent | read-write | current | 1- to clear all the current OTN PM's for this interface |
| 1.3.6.1.4.1.2636.3.70.1.1.13.1.2 | ColumnjnxOtnClearInterfaceInterval | read-write | current | 1- to clear all the OTN PM's intervals(1-96) for this interface |
| 1.3.6.1.4.1.2636.3.70.1.1.13.1.3 | ColumnjnxOtnClearInterfaceDay | read-write | current | 1 - to clear all the Current Day and Previous Day OTN PM's for this interface |
| 1.3.6.1.4.1.2636.3.70.1.1.13.1.4 | ColumnjnxOtnClearInterfaceAll | read-write | current | 1 - to clear all the OTN PM's for this interface |
| 1.3.6.1.4.1.2636.3.70.1.2 | NodejnxIfOtnOCh2 | |||
| 1.3.6.1.4.1.2636.3.70.1.2.1 | TablejnxIfOtnOCh2CfgTable | not-accessible | obsolete | Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the Otn OCh2 Config Table. |
| 1.3.6.1.4.1.2636.3.70.1.2.1.1 | RowjnxIfOtnOCh2CfgEntry | not-accessible | obsolete | A conceptual row that contains of the Otn OCh2 Config Table. |
| 1.3.6.1.4.1.2636.3.70.1.2.1.1.1 | ColumnjnxIfOtnOCh2CfgContainerIndex | not-accessible | obsolete | Container Index associated with the object instance. |
| 1.3.6.1.4.1.2636.3.70.1.2.1.1.2 | ColumnjnxIfOtnOCh2CfgL1Index | not-accessible | obsolete | FPC slot number of the interface. |
| 1.3.6.1.4.1.2636.3.70.1.2.1.1.3 | ColumnjnxIfOtnOCh2CfgL2Index | not-accessible | obsolete | PIC slot number of the interface. |
| 1.3.6.1.4.1.2636.3.70.1.2.1.1.4 | ColumnjnxIfOtnOCh2CfgL3Index | not-accessible | obsolete | Port number of the interface. |
| 1.3.6.1.4.1.2636.3.70.1.2.1.1.5 | ColumnjnxIfOtnOCh2CfgL4Index | not-accessible | obsolete | Sub-Port number of the interface. |
| 1.3.6.1.4.1.2636.3.70.1.2.1.1.6 | ColumnjnxIfOtnOCh2LocalLoopback | read-write | obsolete | This is the local loopback at the Line (after the optics). |
| 1.3.6.1.4.1.2636.3.70.1.2.1.1.7 | ColumnjnxIfOtnOCh2LineLoopback | read-write | obsolete | This is the line loopback at the Line. |
| 1.3.6.1.4.1.2636.3.70.1.2.1.1.8 | ColumnjnxIfOtnOCh2PayloadLoopback | read-write | obsolete | This is the Payload loopback before the optics. |
| 1.3.6.1.4.1.2636.3.70.1.2.1.1.9 | ColumnjnxIfOtnOCh2AdminState | read-write | obsolete | The Admin state of this interface |
| 1.3.6.1.4.1.2636.3.70.1.2.1.1.10 | ColumnjnxIfOtnOCh2OperState | read-only | obsolete | The operational state of this interface |
| 1.3.6.1.4.1.2636.3.70.1.2.1.1.11 | ColumnjnxIfOtnOCh2Index | read-only | obsolete | The interface ifIndex of this interface |
| 1.3.6.1.4.1.2636.3.70.1.2.1.1.12 | ColumnjnxIfOtnOCh2Status | read-only | current | The interface status at the OCh layer. |
| 1.3.6.1.4.1.2636.3.70.1.2.1.1.13 | ColumnjnxIfOtnOCh2PortMode | read-only | obsolete | The Port Mode for this interface 0 - default (not applicable) 1 - lan 2 - wan 3 - gfp |
| 1.3.6.1.4.1.2636.3.70.1.2.2 | TablejnxIfOtnOCh2OTUkCfgTable | not-accessible | obsolete | Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the Otn OCh2 OTUk config table. |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1 | RowjnxIfOtnOCh2OTUkCfgEntry | not-accessible | obsolete | A conceptual row that contains the Otn OCh2 OTUk config table. |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.1 | ColumnjnxIfOtnOCh2OTUkCfgContIndx | not-accessible | obsolete | Container Index associated with the object instance. |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.2 | ColumnjnxIfOtnOCh2OTUkCfgL1Index | not-accessible | obsolete | FPC slot number of the interface. |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.3 | ColumnjnxIfOtnOCh2OTUkCfgL2Index | not-accessible | obsolete | PIC slot number of the interface. |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.4 | ColumnjnxIfOtnOCh2OTUkCfgL3Index | not-accessible | obsolete | Port number of the interface. |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.5 | ColumnjnxIfOtnOCh2OTUkCfgL4Index | not-accessible | obsolete | Port number of the interface. |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.6 | ColumnjnxIfOtnOCh2OTUkCfgRate | read-write | obsolete | This is the rate for the interface and the rates depend on the interface/fru type. |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.7 | ColumnjnxIfOtnOCh2OTUkCfgFecMode | read-write | obsolete | This is the Fec type in the OTU frame and the selection depends on the interface/fru type. |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.8 | ColumnjnxIfOtnOCh2OTUkEnAutoFrrByteIns | read-write | obsolete | This will enable/disable the automatic insertion of the frr SF/SD byte in the overhead bytes(RES) |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.9 | ColumnjnxIfOtnOCh2OTUkEnBERFrrSupport | read-write | obsolete | This will enable/disable the FRR support for BER |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.10 | ColumnjnxIfOtnOCh2OTUkPreFecBERThMant | read-write | obsolete | This will set the BER threshold(mantissa), which when crossed will trigger Signal Degrade. |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.11 | ColumnjnxIfOtnOCh2OTUkPreFecBERThExpo | read-write | obsolete | This will set the BER threshold(exponent), which when crossed will trigger Signal Degrade. |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.12 | ColumnjnxIfOtnOCh2OTUkPreFecBERThTime | read-write | obsolete | The collection times (1ms - 1sec) to calculate the BER. |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.13 | ColumnjnxIfOtnOCh2OTUkTIMActEnabled | read-write | obsolete | Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. The default value of this object is false(2). |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.14 | ColumnjnxIfOtnOCh2OTUkTxTTI | read-write | obsolete | The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.15 | ColumnjnxIfOtnOCh2OTUkRxTTI | read-only | obsolete | The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.16 | ColumnjnxIfOtnOCh2OTUkExpectedRxSapi | read-write | obsolete | Expected receive SAPI. |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.17 | ColumnjnxIfOtnOCh2OTUkExpectedRxDapi | read-write | obsolete | Expected receive DAPI. |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.18 | ColumnjnxIfOtnOCh2OTUkStatus | read-only | obsolete | The interface status at the OTUk layer. |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.19 | ColumnjnxIfOtnOCh2OTUkPreFecBERThClrMn | read-write | obsolete | This will set the BER threshold(mantissa) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below … |
| 1.3.6.1.4.1.2636.3.70.1.2.2.1.20 | ColumnjnxIfOtnOCh2OTUkPreFecBERThClrEx | read-write | obsolete | This will set the BER threshold(exponent) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below … |
| 1.3.6.1.4.1.2636.3.70.1.2.3 | TablejnxIfOtnOCh2ODUkCfgTable | not-accessible | obsolete | Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the Otn ODUk config table. |
| 1.3.6.1.4.1.2636.3.70.1.2.3.1 | RowjnxIfOtnOCh2ODUkCfgEntry | not-accessible | obsolete | A conceptual row that contains information about the Otn ODUk config. |
| 1.3.6.1.4.1.2636.3.70.1.2.3.1.1 | ColumnjnxIfOtnOCh2ODUkCfgContIndx | not-accessible | obsolete | Container Index associated with the Object Instance. |
| 1.3.6.1.4.1.2636.3.70.1.2.3.1.2 | ColumnjnxIfOtnOCh2ODUkCfgL1Index | not-accessible | obsolete | FPC slot number of the interface. |
| 1.3.6.1.4.1.2636.3.70.1.2.3.1.3 | ColumnjnxIfOtnOCh2ODUkCfgL2Index | not-accessible | obsolete | PIC slot number of the interface. |
| 1.3.6.1.4.1.2636.3.70.1.2.3.1.4 | ColumnjnxIfOtnOCh2ODUkCfgL3Index | not-accessible | obsolete | Port number of the interface. |
| 1.3.6.1.4.1.2636.3.70.1.2.3.1.5 | ColumnjnxIfOtnOCh2ODUkCfgL4Index | not-accessible | obsolete | Sub-Port number of the interface. |
| 1.3.6.1.4.1.2636.3.70.1.2.3.1.6 | ColumnjnxIfOtnOCh2ODUkAPSPCC0 | read-write | obsolete | Read/Write APS PCC byte 0 for this ODUk only. |
| 1.3.6.1.4.1.2636.3.70.1.2.3.1.7 | ColumnjnxIfOtnOCh2ODUkAPSPCC1 | read-write | obsolete | Read/Write APS PCC byte 1 for this ODUk only. |
| 1.3.6.1.4.1.2636.3.70.1.2.3.1.8 | ColumnjnxIfOtnOCh2ODUkAPSPCC2 | read-write | obsolete | Read/Write APS PCC byte 2 for this ODUk only. |
| 1.3.6.1.4.1.2636.3.70.1.2.3.1.9 | ColumnjnxIfOtnOCh2ODUkAPSPCC3 | read-write | obsolete | Read/Write APS PCC byte 3 for this ODUk only. |
| 1.3.6.1.4.1.2636.3.70.1.2.3.1.10 | ColumnjnxIfOtnOCh2ODUkPayloadType | read-write | obsolete | Read/Write Payload Type for ODUk only. |
| 1.3.6.1.4.1.2636.3.70.1.2.3.1.11 | ColumnjnxIfOtnOCh2ODUkTIMActEnabled | read-write | obsolete | Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. The default value of this object is false(2). |
| 1.3.6.1.4.1.2636.3.70.1.2.3.1.12 | ColumnjnxIfOtnOCh2ODUkTxTTI | read-write | obsolete | The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer. |
| 1.3.6.1.4.1.2636.3.70.1.2.3.1.13 | ColumnjnxIfOtnOCh2ODUkRxTTI | read-only | obsolete | The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer. |
| 1.3.6.1.4.1.2636.3.70.1.2.3.1.14 | ColumnjnxIfOtnOCh2ODUkExpectedRxSapi | read-write | obsolete | Expected receive SAPI for this layer. |
| 1.3.6.1.4.1.2636.3.70.1.2.3.1.15 | ColumnjnxIfOtnOCh2ODUkExpectedRxDapi | read-write | obsolete | Expected receive DAPI for this layer. |
| 1.3.6.1.4.1.2636.3.70.1.2.3.1.16 | ColumnjnxIfOtnOCh2ODUkStatus | read-only | current | The status at the ODUk layer Only some of these alarms are valid for the TCM layer |
| 1.3.6.1.4.1.2636.3.70.1.2.3.1.17 | ColumnjnxIfOtnOCh2ODUkRxPayloadType | read-only | obsolete | Receive Payload Type for ODUk only. |
| 1.3.6.1.4.1.2636.3.70.1.2.4 | TablejnxIfOtnOCh2TcmCfgTable | not-accessible | obsolete | Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the Otn TCM config table. |
| 1.3.6.1.4.1.2636.3.70.1.2.4.1 | RowjnxIfOtnOCh2TcmCfgEntry | not-accessible | obsolete | A conceptual row that contains information about the Otn Tcm config. |
| 1.3.6.1.4.1.2636.3.70.1.2.4.1.1 | ColumnjnxIfOtnOCh2TcmCfgContIndx | not-accessible | obsolete | Container Index associated with the object. |
| 1.3.6.1.4.1.2636.3.70.1.2.4.1.2 | ColumnjnxIfOtnOCh2TcmCfgL1Index | not-accessible | obsolete | FPC slot number of the interface. |
| 1.3.6.1.4.1.2636.3.70.1.2.4.1.3 | ColumnjnxIfOtnOCh2TcmCfgL2Index | not-accessible | obsolete | PIC slot number of the interface. |
| 1.3.6.1.4.1.2636.3.70.1.2.4.1.4 | ColumnjnxIfOtnOCh2TcmCfgL3Index | not-accessible | obsolete | Port number of the interface. |
| 1.3.6.1.4.1.2636.3.70.1.2.4.1.5 | ColumnjnxIfOtnOCh2TcmCfgL4Index | not-accessible | obsolete | Sub-Port number of the interface. |
| 1.3.6.1.4.1.2636.3.70.1.2.4.1.6 | ColumnjnxIfOtnOCh2TcmCfgLevel | not-accessible | obsolete | The TCM level for the Table |
| 1.3.6.1.4.1.2636.3.70.1.2.4.1.7 | ColumnjnxIfOtnOCh2TCMEnable | read-write | obsolete | Enable this TCM layer (only for TCM layers) |
| 1.3.6.1.4.1.2636.3.70.1.2.4.1.8 | ColumnjnxIfOtnOCh2TcmTxTTI | read-write | obsolete | The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer. |
| 1.3.6.1.4.1.2636.3.70.1.2.4.1.9 | ColumnjnxIfOtnOCh2TcmRxTTI | read-only | obsolete | The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer. |
| 1.3.6.1.4.1.2636.3.70.1.2.4.1.10 | ColumnjnxIfOtnOCh2TcmExpectedRxSapi | read-write | obsolete | Expected receive SAPI for this layer. |
| 1.3.6.1.4.1.2636.3.70.1.2.4.1.11 | ColumnjnxIfOtnOCh2TcmExpectedRxDapi | read-write | obsolete | Expected receive DAPI for this layer. |
| 1.3.6.1.4.1.2636.3.70.1.2.4.1.12 | ColumnjnxIfOtnOCh2TcmStatus | read-only | obsolete | The status at the TCM layer. |
| 1.3.6.1.4.1.2636.4.21.0 | NodejnxIfOtnNotificationPrefix | |||
| 1.3.6.1.4.1.2636.4.21.0.1 | NotificationjnxIfOtnNotificationAdminStatus | current | Notification of the admin state of the otn interface. | |
| 1.3.6.1.4.1.2636.4.21.0.2 | NotificationjnxIfOtnNotificationOperStatus | current | Notification of operational state of the otn interface |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JnxIfAdminStates | INTEGER { jnxAdminStateInService(1), jnxAdminStateInServiceMA(2), jnxAdminStateOutofService(3), jnxAdminStateOutofServiceMA(4) } | current | Admin states for an interface |
| JnxIfOperStates | INTEGER { jnxOperStateInit(1), jnxOperStateNormal(2), jnxOperStateFault(3), jnxOperStateDegraded(4) } | current | Operational states for an interface |
| JnxIfOtnDirection | INTEGER { jnxTxDir(1), jnxRxDir(2), jnxBiDir(3) } | current | Direction for the entities in the table |
| JnxIfOtnFecType | INTEGER { nofec(0), gfec(1), efecI2(2), efecI3(3), efecI4(4), efecI5(5), efecI6(6), efecI7(7), efecI8(8), efecI9(9), gfecandsdfec(10), sdfec(11), hgfec(12) } | current | fec modes of an interface |
| JnxIfOtnLayer | INTEGER { jnxOch(1), jnxOTUk(2), jnxODUk(3), jnxTCM(4) } | current | Layer which describes the table |
| JnxIfOtnRate | INTEGER { otu0(1), otu1(2), otu2(3), otu2e(4), otu3(5), otu4(6), otu1e(7), otu5(8) } | current | Rates for an interface |
| JnxIfOtnServiceStateAction | INTEGER { jnxNotSupported(0), jnxNonServiceAffecting(1), jnxServiceAffecting(2) } | current | Notification's action on the service state |
| JnxIfOtnSeverity | INTEGER { jnxCritical(1), jnxMajor(2), jnxMinor(3), jnxInfo(4) } | current | Severity of the Notification |
| JnxIfOtnType | INTEGER { jnxNearEnd(1), jnxFarEnd(2) } | current | Near End or Far End |