JUNIPER-SOAM-PM-MIB
285 objects
This MIB module contains the management objects for the management of Ethernet Services Operations, Administration and Maintenance for Performance Monitoring.
Imported Objects
| IEEE8021-CFM-MIB | Dot1afCfmIndexIntegerNextFree dot1agCfmMaIndex dot1agCfmMdIndex dot1agCfmMepEntry dot1agCfmMepIdentifier Dot1agCfmMepIdOrZero |
| IEEE8021-TC-MIB | IEEE8021VlanIndex ieee802dot1mibs |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| JUNIPER-SMI | jnxMibs |
| LLDP-MIB | LldpChassisId LldpChassisIdSubtype LldpPortId LldpPortIdSubtype |
| Q-BRIDGE-MIB | VlanId VlanIdOrNone |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress RowStatus TAddress TDomain TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.78 | IdentityjnxSoamPmMib | This MIB module contains the management objects for the management of Ethernet Services Operations, Administration and Maintenance for Performance Monitoring. | ||
| 1.3.6.1.4.1.2636.3.78.0 | NodejnxSoamPmNotifications | |||
| 1.3.6.1.4.1.2636.3.78.0.1 | NotificationjnxSoamLmSessionStartStopAlarm | current | An jnxSoamLmSessionStartStopAlarm notification is sent when the state of jnxSoamLmCfgSessionStatus changes. The management entity that receives the notificatio… | |
| 1.3.6.1.4.1.2636.3.78.0.2 | NotificationjnxSoamDmSessionStartStopAlarm | current | An jnxSoamDmSessionStartStopAlarm notification is sent when the state of jnxSoamDmCfgSessionStatus changes. The management entity that receives the notificatio… | |
| 1.3.6.1.4.1.2636.3.78.0.3 | NotificationjnxSoamPmThresholdCrossingAlarm | current | An jnxSoamPmThresholdCrossingAlarm notification is sent if the following conditions are met for a particular type. For an aboveAlarm five conditions need to be… | |
| 1.3.6.1.4.1.2636.3.78.1 | NodejnxSoamPmMibObjects | |||
| 1.3.6.1.4.1.2636.3.78.1.1 | NodejnxSoamPmMep | |||
| 1.3.6.1.4.1.2636.3.78.1.1.1 | TablejnxSoamPmMepTable | not-accessible | current | This table is an extension of the dot1agCfmMepTable and rows are automatically added or deleted from this table based upon row creation and destruction of the … |
| 1.3.6.1.4.1.2636.3.78.1.1.1.1 | RowjnxSoamPmMepEntry | not-accessible | current | The conceptual row of jnxSoamPmMepTable. |
| 1.3.6.1.4.1.2636.3.78.1.1.1.1.1 | ColumnjnxSoamPmMepOperNextIndex | read-only | current | This object contains an unused value for a PM session number on a MEP that can be used for either LM or DM sessions, or a zero to indicate that none exist. Thi… |
| 1.3.6.1.4.1.2636.3.78.1.1.1.1.2 | ColumnjnxSoamPmMepLmSingleEndedResponder | read-only | current | This object specifies whether the Loss Measurement (LMM) single-ended Responder is enabled. The value 'true' indicates the single-ended Loss Measurement Respon… |
| 1.3.6.1.4.1.2636.3.78.1.1.1.1.3 | ColumnjnxSoamPmMepSlmSingleEndedResponder | read-only | current | This object specifies whether the Synthetic Loss Measurement (SLM) single-ended Responder is enabled. The value 'true' indicates the single-ended SLM Responder… |
| 1.3.6.1.4.1.2636.3.78.1.1.1.1.4 | ColumnjnxSoamPmMepDmSingleEndedResponder | read-only | current | This object specifies whether the Delay Measurement (DMM) single ended Responder is enabled. The value 'true' indicates the single-ended Delay Measurement Resp… |
| 1.3.6.1.4.1.2636.3.78.1.2 | NodejnxSoamPmLmObjects | |||
| 1.3.6.1.4.1.2636.3.78.1.2.1 | TablejnxSoamLmCfgTable | not-accessible | current | This table includes configuration objects and operations for the Frame Loss Measurement function defined in [Y.1731] and [MEF SOAM-PM]. Each row in the table r… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1 | RowjnxSoamLmCfgEntry | not-accessible | current | The conceptual row of jnxSoamLmCfgTable. |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.1 | ColumnjnxSoamLmCfgIndex | read-only | current | An index to the Loss Measurement Configuration table which indicates the specific measurement session for the MEP. jnxSoamPmMepOperNextIndex needs to be inspec… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.2 | ColumnjnxSoamLmCfgType | read-only | current | This object specifies what type of Loss Measurement will be performed. lmLmm(1) LMM SOAM PDU generated and received LMR responses tracked lmSlm(2) SLM SOAM PDU… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.3 | ColumnjnxSoamLmCfgVersion | read-only | current | This object indicates the version of the PDUs used to perform Loss Measurement. The value is placed in the Version field of the PDU and indicates that the PDU … |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.4 | ColumnjnxSoamLmCfgEnabled | read-only | current | This object specifies whether the Loss Measurement session is enabled. The value 'true' indicates the Loss Measurement session is enabled and SOAM PDUs are sen… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.5 | ColumnjnxSoamLmCfgMeasurementEnable | read-only | current | A vector of bits that indicates the type of SOAM LM counters found in the jnxSoamLmMeasuredStatsTable, jnxSoamLmCurrentStatsTable, jnxSoamLmHistoryStatsTable t… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.6 | ColumnjnxSoamLmCfgMessagePeriod | read-only | current | This object specifies the interval between Loss Measurement OAM message transmission. For Loss Measurement monitoring applications the default value is 1 sec. … |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.7 | ColumnjnxSoamLmCfgPriority | read-only | current | This object specifies the Loss Measurement OAM message priority as well as the priority of the service/OAM traffic to be monitored. Only frames of the same Cla… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.8 | ColumnjnxSoamLmCfgFrameSize | read-only | current | This object specifies the Loss Measurement frame size between 64 bytes and the maximum transmission unit of the EVC. The range of frame sizes from 64 through 2… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.9 | ColumnjnxSoamLmCfgDataPattern | read-only | current | This object specifies the LM data pattern included in a Data TLV when the size of the LM frame is determined by the jnxSoamLmFrameSize object and jnxoamLmTestT… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.10 | ColumnjnxSoamLmCfgTestTlvIncluded | read-only | current | Indicates whether a Test TLV or Data TLV is included when the size of the LM frame is determined by the jnxSoamLmFrameSize object. A value of 'true' indicates … |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.11 | ColumnjnxSoamLmCfgTestTlvPattern | read-only | current | This object specifies the type of test pattern to be sent in the LM frame Test TLV when the size of LM PDU is determined by the jnxSoamLmFrameSize object and j… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.12 | ColumnjnxSoamLmCfgNumIntervalsStored | read-only | current | This object specifies the number of completed Measurement Intervals to store in the history statistic table (jnxSoamLmHistoryStatsTable) At least 32 completed … |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.13 | ColumnjnxSoamLmCfgDestMepId | read-only | current | The Maintenance Association End Point Identifier of another MEP in the same Maintenance Association to which the SOAM LM frame is to be sent. This address will… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.14 | ColumnjnxSoamLmCfgDestIsMepId | read-only | current | A value of 'true' indicates that MEPID of the target MEP is used for SOAM LM frame transmission. A value of 'false' indicates that the MAC address of the targe… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.15 | ColumnjnxSoamLmCfgStartTimeType | read-only | current | This object specifies the type of start time of the SOAM LM session. The start time can be disabled (none), immediate, relative, or fixed. The value of 'none' … |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.16 | ColumnjnxSoamLmCfgFixedStartDateAndTime | read-only | current | This object specifies the fixed start date/time for the SOAM Loss Measurement session. This object is used only used if jnxSoamLmStartTimeType is 'fixed' and i… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.17 | ColumnjnxSoamLmCfgRelativeStartTime | read-only | current | This object specifies the relative start time, from the current system time, for the SOAM LM session. This object is used only if jnxSoamLmStartTimeType is 're… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.18 | ColumnjnxSoamLmCfgRepetitionTime | read-only | current | This object specifies a configurable repetition time between Measurement Intervals in a Loss Measurement session, in seconds. If the value is 0 (none), there i… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.19 | ColumnjnxSoamLmCfgAlignMeasurementIntervals | read-only | current | This object specifies whether the Measurement Intervals for the Loss Measurement session are aligned with a zero offset to real time. The value 'true' indicate… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.20 | ColumnjnxSoamLmCfgAlignMeasurementOffset | read-only | current | This object specifies the offset in minutes from the time of day value if jnxSoamLmCfgAlignMeasurementIntervals is 'true' and the repetition time is a factor o… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.21 | ColumnjnxSoamLmCfgSessionType | read-only | current | This object indicates whether the current session is defined to be 'Proactive' or 'On-Demand'. A value of 'proactive' indicates the current session is 'Proacti… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.22 | ColumnjnxSoamLmCfgSessionStatus | read-only | current | This object indicates the current status of the LM session. A value of 'active' indicates the current LM session is active, i.e. the current time lies between … |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.23 | ColumnjnxSoamLmCfgHistoryClear | read-only | current | This object when written clears the Loss Measurement history Table (jnxSoamLmHistoryStatsTable) - all rows are deleted. When read the value always returns 'fal… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.24 | ColumnjnxSoamLmCfgRowStatus | read-only | current | The status of the row. The writable columns in a row cannot be changed if the row is active, except for jnxSoamLmCfgHistoryClear and jnxSoamLmCfgEnabled object… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.25 | ColumnjnxSoamLmCfgMeasurementInterval | read-only | current | This object specifies the Measurement Interval for FLR statistics, in minutes. A Measurement Interval of 15 minutes needs to be supported, other intervals may … |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.26 | ColumnjnxSoamLmCfgDestMacAddress | read-create | current | The Target or Destination MAC Address Field to be transmitted. If jnxSoamLmCfgType is 'lmCcm', the destination MAC address is always a multicast address indica… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.27 | ColumnjnxSoamLmCfgStopTimeType | read-create | current | This object specifies the type of stop time to terminate the SOAM LM session. The stop time can be forever (none), relative, or fixed. The value of 'none' indi… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.28 | ColumnjnxSoamLmCfgFixedStopDateAndTime | read-only | current | This object specifies the fixed stop date/time for the SOAM Loss Measurement session. This object is used only used if jnxSoamLmStopTimeType is 'fixed' and is … |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.29 | ColumnjnxSoamLmCfgRelativeStopTime | read-create | current | This object specifies the relative stop time, from the session start time, to stop the SOAM LM session. This object is used only if jnxSoamLmStopTimeType is 'r… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.30 | ColumnjnxSoamLmCfgAvailabilityMeasurementInterval | read-create | current | This object specifies the availability Measurement Interval in minutes. A Measurement Interval of 15 minutes is to be supported, other intervals can be support… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.31 | ColumnjnxSoamLmCfgAvailabilityNumConsecutiveMeasPdus | read-create | current | This object specifies a configurable number of consecutive loss measurement PDUs to be used in evaluating the availability/unavailability status of each availa… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.32 | ColumnjnxSoamLmCfgAvailabilityFlrThreshold | read-create | current | This object specifies a configurable availability threshold to be used in evaluating the availability/unavailability status of an availability indicator per ME… |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.33 | ColumnjnxSoamLmCfgAvailabilityNumConsecutiveIntervals | read-create | current | This object specifies a configurable number of consecutive availability indicators to be used to determine a change in the availability status as indicated by … |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.34 | ColumnjnxSoamLmCfgAvailabilityNumConsecutiveHighFlr | read-create | current | This object specifies a configurable number of consecutive availability indicators to be used for assessing CHLI. This parameter is equivalent to the Resilency… |
| 1.3.6.1.4.1.2636.3.78.1.2.2 | TablejnxSoamLmMeasuredStatsTable | not-accessible | current | This object contains the last measured results for a SOAM Loss Measurement session. Each row in the table represents a Loss Measurement session for the defined… |
| 1.3.6.1.4.1.2636.3.78.1.2.2.1 | RowjnxSoamLmMeasuredStatsEntry | not-accessible | current | The conceptual row of jnxSoamLmMeasuredStatsTable |
| 1.3.6.1.4.1.2636.3.78.1.2.2.1.1 | ColumnjnxSoamLmMeasuredStatsForwardFlr | read-only | current | This object contains the last frame loss ratio in the forward direction calculated by this MEP. The FLR value is a ratio that is expressed as a percent with a … |
| 1.3.6.1.4.1.2636.3.78.1.2.2.1.2 | ColumnjnxSoamLmMeasuredStatsBackwardFlr | read-only | current | This object contains the last frame loss ratio in the backward direction calculated by this MEP. The FLR value is a ratio that is expressed as a percent with a… |
| 1.3.6.1.4.1.2636.3.78.1.2.2.1.3 | ColumnjnxSoamLmMeasuredStatsAvailForwardStatus | read-only | current | This object indicates the availability status (the outcome of the last known availability indicator) in the forward direction. Note that the status of an avail… |
| 1.3.6.1.4.1.2636.3.78.1.2.2.1.4 | ColumnjnxSoamLmMeasuredStatsAvailBackwardStatus | read-only | current | This object indicates the availability status (the outcome of the last availability indicator) in the backward direction. Note that the status of an availabili… |
| 1.3.6.1.4.1.2636.3.78.1.2.2.1.5 | ColumnjnxSoamLmMeasuredStatsAvailForwardLastTransitionTime | read-only | current | This object indicates the time of the last transition between available and unavailable in the forward direction. If there have been no transitions since the L… |
| 1.3.6.1.4.1.2636.3.78.1.2.2.1.6 | ColumnjnxSoamLmMeasuredStatsAvailBackwardLastTransitionTime | read-only | current | This object indicates the time of the last transition between available and unavailable in the backward direction. If there have been no transitions since the … |
| 1.3.6.1.4.1.2636.3.78.1.2.3 | TablejnxSoamLmCurrentStatsTable | not-accessible | current | This table contains the results for the current Measurement Interval in a SOAM Loss Measurement session gathered during the interval indicated by iterator coun… |
| 1.3.6.1.4.1.2636.3.78.1.2.3.1 | RowjnxSoamLmCurrentStatsEntry | not-accessible | current | The conceptual row of jnxSoamLmCurrentStatsTable |
| 1.3.6.1.4.1.2636.3.78.1.2.3.1.1 | ColumnjnxSoamLmCurrentStatsIndex | read-only | current | The index for the current Measurement Interval for this PM session. This value will become the value for jnxSoamLmHistoryStatsIndex once the Measurement Interv… |
| 1.3.6.1.4.1.2636.3.78.1.2.3.1.2 | ColumnjnxSoamLmCurrentStatsStartTime | read-only | current | The time that the current Measurement Interval started. |
| 1.3.6.1.4.1.2636.3.78.1.2.3.1.3 | ColumnjnxSoamLmCurrentStatsElapsedTime | read-only | current | The time that the current Measurement Interval has been running, in 0.01 seconds. |
| 1.3.6.1.4.1.2636.3.78.1.2.3.1.4 | ColumnjnxSoamLmCurrentStatsSuspect | read-only | current | Whether the Measurement Interval has been marked as suspect. The object is set to false at the start of a measurement interval. It is set to true when there is… |
| 1.3.6.1.4.1.2636.3.78.1.2.3.1.5 | ColumnjnxSoamLmCurrentStatsForwardTransmittedFrames | read-only | current | This object contains the number of frames transmitted in the forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Se… |
| 1.3.6.1.4.1.2636.3.78.1.2.3.1.6 | ColumnjnxSoamLmCurrentStatsForwardReceivedFrames | read-only | current | This object contains the number of frames received in the forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Servi… |
| 1.3.6.1.4.1.2636.3.78.1.2.3.1.7 | ColumnjnxSoamLmCurrentStatsForwardMinFlr | read-only | current | This object contains the minimum one-way frame loss ratio in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a rat… |
| 1.3.6.1.4.1.2636.3.78.1.2.3.1.8 | ColumnjnxSoamLmCurrentStatsForwardMaxFlr | read-only | current | This object contains the maximum one-way frame loss ratio in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a rat… |
| 1.3.6.1.4.1.2636.3.78.1.2.3.1.9 | ColumnjnxSoamLmCurrentStatsForwardAvgFlr | read-only | current | This object contains the average one-way frame loss ratio in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a rat… |
| 1.3.6.1.4.1.2636.3.78.1.2.3.1.10 | ColumnjnxSoamLmCurrentStatsBackwardTransmittedFrames | read-only | current | This object contains the number of frames transmitted in the backward direction by this MEP. For a PM Session of type lmLmm and lmCcm this includes Ethernet Se… |
| 1.3.6.1.4.1.2636.3.78.1.2.3.1.11 | ColumnjnxSoamLmCurrentStatsBackwardReceivedFrames | read-only | current | This object contains the number of frames received in the backward direction by this MEP. For a PM Session of type lmLmm this includes Ethernet Service Frames … |
| 1.3.6.1.4.1.2636.3.78.1.2.3.1.12 | ColumnjnxSoamLmCurrentStatsBackwardMinFlr | read-only | current | This object contains the minimum one-way frame loss ratio in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ra… |
| 1.3.6.1.4.1.2636.3.78.1.2.3.1.13 | ColumnjnxSoamLmCurrentStatsBackwardMaxFlr | read-only | current | This object contains the maximum one-way frame loss ratio in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ra… |
| 1.3.6.1.4.1.2636.3.78.1.2.3.1.14 | ColumnjnxSoamLmCurrentStatsBackwardAvgFlr | read-only | current | This object contains the average one-way frame loss ratio in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ra… |
| 1.3.6.1.4.1.2636.3.78.1.2.3.1.15 | ColumnjnxSoamLmCurrentStatsSoamPdusSent | read-only | current | This object contains the count of the number of SOAM PDUs sent during this Measurement Interval. This object applies when jnxSoamLmCfgType is lmLmm, lmSlm, or … |
| 1.3.6.1.4.1.2636.3.78.1.2.3.1.16 | ColumnjnxSoamLmCurrentStatsSoamPdusReceived | read-only | current | This object contains the count of the number of SOAM PDUs PDUs received in this Measurement Interval. This object applies when jnxSoamLmCfgType is lmLmm, lmSlm… |
| 1.3.6.1.4.1.2636.3.78.1.2.4 | TablejnxSoamLmHistoryStatsTable | not-accessible | current | This table contains the results for history Measurement Intervals in a SOAM Loss Measurement session. Rows of this table object are created automatically by th… |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1 | RowjnxSoamLmHistoryStatsEntry | not-accessible | current | The conceptual row of jnxSoamLmHistoryStatsTable |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1.1 | ColumnjnxSoamLmHistoryStatsIndex | read-only | current | The index for the Measurement Interval within this PM session. Measurement Interval indexes are assigned sequentially by the SNMP Agent. The first Measurement … |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1.2 | ColumnjnxSoamLmHistoryStatsEndTime | read-only | current | The time that the Measurement Interval ended. |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1.3 | ColumnjnxSoamLmHistoryStatsElapsedTime | read-only | current | The length of time that the Measurement Interval ran for, in 0.01 seconds. |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1.4 | ColumnjnxSoamLmHistoryStatsSuspect | read-only | current | Whether the Measurement Interval has been marked as suspect. The object is set to true when there is a discontinuity in the performance measurements during the… |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1.5 | ColumnjnxSoamLmHistoryStatsForwardTransmittedFrames | read-only | current | This object contains the number of frames transmitted in the forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Se… |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1.6 | ColumnjnxSoamLmHistoryStatsForwardReceivedFrames | read-only | current | This object contains the number of frames received in the forward direction by this MEP. For a PM Session of types lmLmm and lmCcm this includes Ethernet Servi… |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1.7 | ColumnjnxSoamLmHistoryStatsForwardMinFlr | read-only | current | This object contains the minimum one-way frame loss ratio in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a rat… |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1.8 | ColumnjnxSoamLmHistoryStatsForwardMaxFlr | read-only | current | This object contains the maximum one-way frame loss ratio in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a rat… |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1.9 | ColumnjnxSoamLmHistoryStatsForwardAvgFlr | read-only | current | This object contains the average one-way frame loss ratio in the forward direction calculated by this MEP for this Measurement Interval. The FLR value is a rat… |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1.10 | ColumnjnxSoamLmHistoryStatsBackwardTransmittedFrames | read-only | current | This object contains the number of frames transmitted in the backward direction by this MEP. For a PM Session of type lmLmm and lmCcm this includes Ethernet Se… |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1.11 | ColumnjnxSoamLmHistoryStatsBackwardReceivedFrames | read-only | current | This object contains the number of frames received in the backward direction by this MEP. For a PM Session of type lmLmm and lmCcm this includes Ethernet Servi… |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1.12 | ColumnjnxSoamLmHistoryStatsBackwardMinFlr | read-only | current | This object contains the minimum one-way frame loss ratio in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ra… |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1.13 | ColumnjnxSoamLmHistoryStatsBackwardMaxFlr | read-only | current | This object contains the maximum one-way frame loss ratio in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ra… |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1.14 | ColumnjnxSoamLmHistoryStatsBackwardAvgFlr | read-only | current | This object contains the average one-way frame loss ratio in the backward direction calculated by this MEP for this Measurement Interval. The FLR value is a ra… |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1.15 | ColumnjnxSoamLmHistoryStatsSoamPdusSent | read-only | current | This object contains the count of the number of SOAM PDUs sent during this Measurement Interval. This object applies when jnxSoamLmCfgType is lmLmm, lmSlm, or … |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1.16 | ColumnjnxSoamLmHistoryStatsSoamPdusReceived | read-only | current | This object contains the count of the number of SOAM PDUs received in this Measurement Interval. This object applies when jnxSoamLmCfgType is lmLmm, lmSlm, or … |
| 1.3.6.1.4.1.2636.3.78.1.2.5 | TablejnxSoamLmThresholdCfgTable | not-accessible | current | This table contains the list of Loss Measurement configuration threshold values for LM Performance Monitoring. The main purpose of the threshold configuration … |
| 1.3.6.1.4.1.2636.3.78.1.2.5.1 | RowjnxSoamLmThresholdCfgEntry | not-accessible | current | The conceptual row of jnxSoamLmThresholdCfgTable. |
| 1.3.6.1.4.1.2636.3.78.1.2.5.1.1 | ColumnjnxSoamLmThresholdCfgIndex | read-only | current | The index of the threshold number for the specific LM threshold entry. An index value of '1' needs to be supported. Other index values can also be supported. |
| 1.3.6.1.4.1.2636.3.78.1.2.5.1.2 | ColumnjnxSoamLmThresholdCfgEnable | read-only | current | A vector of bits that indicates the type of SOAM LM thresholds notifications that are enabled. A bit set to '1' enables the specific SOAM LM threshold notifica… |
| 1.3.6.1.4.1.2636.3.78.1.2.5.1.3 | ColumnjnxSoamLmThresholdCfgAvgFlrForwardThreshold | read-only | current | This object is used to set the average forward frame loss ratio threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.2636.3.78.1.2.5.1.4 | ColumnjnxSoamLmThresholdCfgAvgFlrBackwardThreshold | read-only | current | This object is used to set the average backward frame loss ratio threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.2636.3.78.1.2.5.1.5 | ColumnjnxSoamLmThresholdCfgRowStatus | read-only | current | The status of the row. The writable columns in a row cannot be changed if the row is active. All columns are to have a valid value before a row can be activate… |
| 1.3.6.1.4.1.2636.3.78.1.2.6 | TablejnxSoamLmCurrentAvailStatsTable | not-accessible | current | This object contains the current results for a SOAM Loss Measurement session for availability statistics gathered during the interval indicated by jnxSoamLmCfg… |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1 | RowjnxSoamLmCurrentAvailStatsEntry | not-accessible | current | The conceptual row of jnxSoamLmCurrentAvailStatsTable |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1.1 | ColumnjnxSoamLmCurrentAvailStatsIndex | read-only | current | The index for the current availability Measurement Interval for this PM session. This value will become the value for jnxSoamLmHistoryAvailStatsIndex once the … |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1.2 | ColumnjnxSoamLmCurrentAvailStatsStartTime | read-only | current | The time that the current Measurement Interval started. |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1.3 | ColumnjnxSoamLmCurrentAvailStatsElapsedTime | read-only | current | The time that the current Measurement Interval has been running, in 0.01 seconds. |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1.4 | ColumnjnxSoamLmCurrentAvailStatsSuspect | read-only | current | Whether the Measurement Interval has been marked as suspect. The object is set to false at the start of a measurement interval. It is set to true when there is… |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1.5 | ColumnjnxSoamLmCurrentAvailStatsForwardHighLoss | read-only | current | This object is the number of high loss intervals (HLI) over time in the forward direction. The value starts at 0 and increments for every HLI that occurs. This… |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1.6 | ColumnjnxSoamLmCurrentAvailStatsBackwardHighLoss | read-only | current | This object is the number of high loss intervals (HLI) over time in the backwards direction. The value starts at 0 and increments for every HLI that occurs. Th… |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1.7 | ColumnjnxSoamLmCurrentAvailStatsForwardConsecutiveHighLoss | read-only | current | This object is the number of consecutive high loss intervals (CHLI) over time in the forward direction. The value starts at 0 and increments for every HLI that… |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1.8 | ColumnjnxSoamLmCurrentAvailStatsBackwardConsecutiveHighLoss | read-only | current | This object is the number of consecutive high loss intervals (CHLI) over time in the backward direction. The value starts at 0 and increments for every HLI tha… |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1.9 | ColumnjnxSoamLmCurrentAvailStatsForwardAvailable | read-only | current | This object contains the number of availability indicators evaluated as available in the forward direction by this MEP during this Measurement Interval. |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1.10 | ColumnjnxSoamLmCurrentAvailStatsBackwardAvailable | read-only | current | This object contains the number of availability indicators evaluated as available in the backward direction by this MEP during this Measurement Interval. |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1.11 | ColumnjnxSoamLmCurrentAvailStatsForwardUnavailable | read-only | current | This object contains the number of availability indicators evaluated as unavailable in the forward direction by this MEP during this Measurement Interval. |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1.12 | ColumnjnxSoamLmCurrentAvailStatsBackwardUnavailable | read-only | current | This object contains the number of availability indicators evaluated as unavailable in the backward direction by this MEP during this Measurement Interval. |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1.13 | ColumnjnxSoamLmCurrentAvailStatsForwardMinFlr | read-only | current | This object contains the minimum one-way availability flr in the forward direction, from among the set of availability flr values calculated by the MEP in this… |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1.14 | ColumnjnxSoamLmCurrentAvailStatsForwardMaxFlr | read-only | current | This object contains the maximum one-way availability flr in the forward direction, from among the set of availability flr values calculated by the MEP in this… |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1.15 | ColumnjnxSoamLmCurrentAvailStatsForwardAvgFlr | read-only | current | This object contains the average one-way availability flr in the forward direction, from among the set of availability flr values calculated by the MEP in this… |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1.16 | ColumnjnxSoamLmCurrentAvailStatsBackwardMinFlr | read-only | current | This object contains the minimum one-way availability flr in the backward direction, from among the set of availability flr values calculated by the MEP in thi… |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1.17 | ColumnjnxSoamLmCurrentAvailStatsBackwardMaxFlr | read-only | current | This object contains the maximum one-way availability flr in the backward direction, from among the set of availability flr values calculated by the MEP in thi… |
| 1.3.6.1.4.1.2636.3.78.1.2.6.1.18 | ColumnjnxSoamLmCurrentAvailStatsBackwardAvgFlr | read-only | current | This object contains the average one-way availability flr in the backward direction, from among the set of availability flr values calculated by the MEP in thi… |
| 1.3.6.1.4.1.2636.3.78.1.2.7 | TablejnxSoamLmHistoryAvailStatsTable | not-accessible | current | This table contains the results for availability history Measurement Intervals in a SOAM Loss Measurement session. Rows of this table object are created automa… |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1 | RowjnxSoamLmHistoryAvailStatsEntry | not-accessible | current | The conceptual row of jnxSoamLmHistoryAvailStatsTable |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1.1 | ColumnjnxSoamLmHistoryAvailStatsIndex | not-accessible | current | The index for the availability Measurement Interval within this PM session. Measurement Interval indexes are assigned sequentially by the SNMP Agent. The first… |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1.2 | ColumnjnxSoamLmHistoryAvailStatsEndTime | read-only | current | The time that the Measurement Interval ended. |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1.3 | ColumnjnxSoamLmHistoryAvailStatsElapsedTime | read-only | current | The length of time that the Measurement Interval ran for, in 0.01 seconds. |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1.4 | ColumnjnxSoamLmHistoryAvailStatsSuspect | read-only | current | Whether the Measurement Interval has been marked as suspect. The object is set to true when there is a discontinuity in the performance measurements during the… |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1.5 | ColumnjnxSoamLmHistoryAvailStatsForwardHighLoss | read-only | current | This object is the number of high loss intervals (HLI) over time in the forward direction. The value starts at 0 and increments for every HLI that occurs. This… |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1.6 | ColumnjnxSoamLmHistoryAvailStatsBackwardHighLoss | read-only | current | This object is the number of high loss intervals (HLI) over time in the backward direction. The value starts at 0 and increments for every HLI that occurs. Thi… |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1.7 | ColumnjnxSoamLmHistoryAvailStatsForwardConsecutiveHighLoss | read-only | current | This object is the number of consecutive high loss intervals (CHLI) over time in the forward direction. The value starts at 0 and increments for every HLI that… |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1.8 | ColumnjnxSoamLmHistoryAvailStatsBackwardConsecutiveHighLoss | read-only | current | This object is the number of consecutive high loss intervals (CHLI) over time in the forward direction. The value starts at 0 and increments for every HLI that… |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1.9 | ColumnjnxSoamLmHistoryAvailStatsForwardAvailable | read-only | current | This object contains the number of availability indicators evaluated as available in the forward direction by this MEP during this Measurement Interval. |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1.10 | ColumnjnxSoamLmHistoryAvailStatsBackwardAvailable | read-only | current | This object contains the number of availability indicators evaluated as available in the backward direction by this MEP during this Measurement Interval. |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1.11 | ColumnjnxSoamLmHistoryAvailStatsForwardUnavailable | read-only | current | This object contains the number of availability indicators evaluated as unavailable in the forward direction by this MEP during this Measurement Interval. |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1.12 | ColumnjnxSoamLmHistoryAvailStatsBackwardUnavailable | read-only | current | This object contains the number of availability indicators evaluated as unavailable in the backward direction by this MEP during this Measurement Interval. |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1.13 | ColumnjnxSoamLmHistoryAvailStatsForwardMinFlr | read-only | current | This object contains the minimum one-way availability flr in the forward direction, from among the set of availability flr values calculated by the MEP in this… |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1.14 | ColumnjnxSoamLmHistoryAvailStatsForwardMaxFlr | read-only | current | This object contains the maximum one-way availability flr in the forward direction, from among the set of availability flr values calculated by the MEP in this… |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1.15 | ColumnjnxSoamLmHistoryAvailStatsForwardAvgFlr | read-only | current | This object contains the average one-way availability flr in the forward direction, from among the set of availability flr values calculated by the MEP in this… |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1.16 | ColumnjnxSoamLmHistoryAvailStatsBackwardMinFlr | read-only | current | This object contains the minimum one-way availability flr in the backward direction, from among the set of availability flr values calculated by the MEP in thi… |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1.17 | ColumnjnxSoamLmHistoryAvailStatsBackwardMaxFlr | read-only | current | This object contains the maximum one-way availability flr in the backward direction, from among the set of availability flr values calculated by the MEP in thi… |
| 1.3.6.1.4.1.2636.3.78.1.2.7.1.18 | ColumnjnxSoamLmHistoryAvailStatsBackwardAvgFlr | read-only | current | This object contains the average one-way availability flr in the backward direction, from among the set of availability flr values calculated by the MEP in thi… |
| 1.3.6.1.4.1.2636.3.78.1.3 | NodejnxSoamPmDmObjects | |||
| 1.3.6.1.4.1.2636.3.78.1.3.1 | TablejnxSoamDmCfgTable | not-accessible | current | This table includes configuration objects and operations for the Delay Measurement function. Each row in the table represents a Delay Measurement session for t… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1 | RowjnxSoamDmCfgEntry | not-accessible | current | The conceptual row of jnxSoamDmCfgTable. |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.1 | ColumnjnxSoamDmCfgIndex | read-only | current | An index to the Delay Measurement Configuration table which indicates the specific measurement session for the MEP. jnxSoamPmMepOperNextIndex needs to be inspe… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.2 | ColumnjnxSoamDmCfgType | read-only | current | This object indicates what type of Delay Measurement is to be performed. dmDmm(1) DMM SOAM PDU generated, DMR responses received (one-way or two-way measuremen… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.3 | ColumnjnxSoamDmCfgVersion | read-only | current | This object indicates the version of the PDUs used to perform Delay Measurement. Version 0 indicates the PDU formats defined in Y.1731-2008. Version 1 indicate… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.4 | ColumnjnxSoamDmCfgEnabled | read-only | current | This object specifies whether the Delay Measurement session is enabled. The value 'true' indicates the Delay Measurement session is enabled AND SOAM PDUs are s… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.5 | ColumnjnxSoamDmCfgMeasurementEnable | read-only | current | A vector of bits that indicates the type of SOAM DM counters that are enabled. A bit set to '1' enables the specific SOAM DM counter. A bit set to '0' disables… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.6 | ColumnjnxSoamDmCfgMessagePeriod | read-only | current | This object specifies the interval between Delay Measurement OAM message transmission. For Delay Measurement monitoring applications, the default value is 100m… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.7 | ColumnjnxSoamDmCfgPriority | read-only | current | This object specifies the priority of frames with Delay Measurement OAM message information. The default value is to be the value which yields the lowest frame… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.8 | ColumnjnxSoamDmCfgFrameSize | read-only | current | This object specifies the Delay Measurement frame size between 64 bytes and the maximum transmission unit of the EVC. The range of frame sizes from 64 through … |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.9 | ColumnjnxSoamDmCfgDataPattern | read-only | current | This object specifies the DM data pattern included in a Data TLV when the size of the DM frame is determined by the jnxSoamDmFrameSize object and jnxSoamDmTest… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.10 | ColumnjnxSoamDmCfgTestTlvIncluded | read-only | current | Indicates whether a Test TLV or Data TLV is included when the size of the DM frame is determined by the jnxSoamDmFrameSize object. A value of 'true' indicates … |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.11 | ColumnjnxSoamDmCfgTestTlvPattern | read-only | current | This object specifies the type of test pattern to be sent in the DM frame Test TLV when the size of DM PDU is determined by the jnxSoamDmFrameSize object and j… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.12 | ColumnjnxSoamDmCfgNumIntervalsStored | read-only | current | This object specifies the number of completed Measurement Intervals to store in the history statistic table. At least 32 completed Measurement Intervals are to… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.13 | ColumnjnxSoamDmCfgDestMepId | read-only | current | The Maintenance Association End Point Identifier of another MEP in the same Maintenance Association to which the SOAM DM frame is to be sent. This address will… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.14 | ColumnjnxSoamDmCfgDestIsMepId | read-only | current | A value of 'true' indicates that MEPID of the target MEP is used for SOAM DM frame transmission. A value of 'false' indicates that the destination MAC address … |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.15 | ColumnjnxSoamDmCfgStartTimeType | read-only | current | This object specifies the type of start time of the SOAM DM session. The start time can be disabled (none), immediate, relative, or fixed. The value of 'none' … |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.16 | ColumnjnxSoamDmCfgRepetitionTime | read-only | current | This object specifies a configurable repetition time between Measurement Intervals in a Delay Measurement session in seconds. If the value is 0 (none), there i… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.17 | ColumnjnxSoamDmCfgAlignMeasurementIntervals | read-only | current | This object specifies whether the Measurement Intervals for the Delay Measurement session are aligned with a zero offset to real time. The value 'true' indicat… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.18 | ColumnjnxSoamDmCfgInterFrameDelayVariationSelectionOffset | read-only | current | This object specifies the selection offset for Inter-Frame Delay Variation measurements. If this value is set to n, then the IFDV is calculated by taking the d… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.19 | ColumnjnxSoamDmCfgSessionType | read-only | current | This object indicates whether the current session is defined to be 'Proactive' or 'On-Demand'. A value of 'proactive' indicates the current session is 'Proacti… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.20 | ColumnjnxSoamDmCfgSessionStatus | read-only | current | This object indicates the current status of the DM session. A value of 'active' indicates the current DM session is active, i.e. the current time lies between … |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.21 | ColumnjnxSoamDmCfgHistoryClear | read-only | current | This object when written clears the Delay Measurement history tables (jnxSoamDmHistoryStatsTable) - all rows are deleted. When read the value always returns 'f… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.22 | ColumnjnxSoamDmCfgRowStatus | read-only | current | The status of the row. The writable columns in a row cannot be changed if the row is active, except for jnxSoamDmCfgEnabled and jnxSoamDmCfgHistoryClear object… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.23 | ColumnjnxSoamDmCfgMeasurementInterval | read-create | current | This object specifies a Measurement Interval in minutes. A Measurement Interval 15 minutes needs to be supported, other intervals may be supported. This object… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.24 | ColumnjnxSoamDmCfgDestMacAddress | read-create | current | The Target or Destination MAC Address Field to be transmitted. If mefSoamDmCfgType is 'dmDmm', the destination address is to be the unicast address of the dest… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.25 | ColumnjnxSoamDmCfgSourceMacAddress | read-create | current | The Source MAC Address Field of the received SOAM DM session PDUs. If mefSoamDmCfgType is dm1DmRx this object indicates the source address of the dm1DmTx DM se… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.26 | ColumnjnxSoamDmCfgFixedStartDateAndTime | read-create | current | This object specifies the fixed start date/time for the SOAM Delay Measurement session. This object is used only used if mefSoamDmStartTimeType is 'fixed' and … |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.27 | ColumnjnxSoamDmCfgRelativeStartTime | read-create | current | This object specifies the relative start time, from the current system time, for the SOAM DM session. This object is used only if mefSoamDmStartTimeType is 're… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.28 | ColumnjnxSoamDmCfgStopTimeType | read-create | current | This object specifies the type of stop time to terminate the SOAM DM session. The stop time can be forever (none), relative, or fixed. The value of 'none' indi… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.29 | ColumnjnxSoamDmCfgFixedStopDateAndTime | read-create | current | This object specifies the fixed stop date/time for the SOAM Delay Measurement session. This object is used only used if mefSoamDmStopTimeType is 'fixed' and is… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.30 | ColumnjnxSoamDmCfgRelativeStopTime | read-create | current | This object specifies the relative stop time, from the session start time, to stop the SOAM DM session. This object is used only if mefSoamDmStopTimeType is 'r… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.31 | ColumnjnxSoamDmCfgAlignMeasurementOffset | read-create | current | This object specifies the offset in minutes from the time of day value if mefSoamDmCfgAlignMeasurementIntervals is 'true' and the repetition time is a factor o… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.32 | ColumnjnxSoamDmCfgNumMeasBinsPerFrameDelayInterval | read-create | current | This object specifies the number of measurement bins per Measurement Interval for Frame Delay measurements. At least 3 bins are to be supported; at least 10 bi… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.33 | ColumnjnxSoamDmCfgNumMeasBinsPerInterFrameDelayVariationInterval | read-create | current | This object specifies the number of measurement bins per Measurement Interval for Inter-Frame Delay Variation measurements. The minimum number of measurement b… |
| 1.3.6.1.4.1.2636.3.78.1.3.1.1.34 | ColumnjnxSoamDmCfgNumMeasBinsPerFrameDelayRangeInterval | read-create | current | This object specifies the number of measurement bins per Measurement Interval for Frame Delay Range measurements. At least 2 bins are to be supported; at least… |
| 1.3.6.1.4.1.2636.3.78.1.3.2 | TablejnxSoamDmMeasuredStatsTable | not-accessible | current | This object contains the last measured results for a SOAM Delay Measurement session. Each row in the table represents a Delay Measurement session for the defin… |
| 1.3.6.1.4.1.2636.3.78.1.3.2.1 | RowjnxSoamDmMeasuredStatsEntry | not-accessible | current | The conceptual row of jnxSoamDmMeasuredStatsTable |
| 1.3.6.1.4.1.2636.3.78.1.3.2.1.1 | ColumnjnxSoamDmMeasuredStatsFrameDelayTwoWay | read-only | current | This object contains the two-way frame delay calculated by this MEP from the last received SOAM PDU. This object is undefined is jnxSoamDmCfgType is dm1DmTx or… |
| 1.3.6.1.4.1.2636.3.78.1.3.2.1.2 | ColumnjnxSoamDmMeasuredStatsFrameDelayForward | read-only | current | This object contains the frame delay in the forward direction calculated by this MEP from the last received SOAM PDU. The value of this object may not be accur… |
| 1.3.6.1.4.1.2636.3.78.1.3.2.1.3 | ColumnjnxSoamDmMeasuredStatsFrameDelayBackward | read-only | current | This object contains the frame delay in the backward direction calculated by this MEP from the last received SOAM PDU. The value of this object may not be accu… |
| 1.3.6.1.4.1.2636.3.78.1.3.2.1.4 | ColumnjnxSoamDmMeasuredStatsIfdvTwoWay | read-only | current | This object contains the last two-way inter-frame delay interval calculated by this MEP. The value of this object is undefined when jnxSoamDmCfgType is dm1DmTx… |
| 1.3.6.1.4.1.2636.3.78.1.3.2.1.5 | ColumnjnxSoamDmMeasuredStatsIfdvForward | read-only | current | This object contains the last one-way inter-frame delay interval in the forward direction calculated by this MEP. The value of this object is undefined when jn… |
| 1.3.6.1.4.1.2636.3.78.1.3.2.1.6 | ColumnjnxSoamDmMeasuredStatsIfdvBackward | read-only | current | This object contains the last one-way inter-frame delay interval in the backward direction calculated by this MEP. The value of this object is undefined when j… |
| 1.3.6.1.4.1.2636.3.78.1.3.3 | TablejnxSoamDmCurrentStatsTable | not-accessible | current | This table contains the results for the current Measurement Interval in a SOAM Delay Measurement session gathered during the interval indicated by iterator cou… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1 | RowjnxSoamDmCurrentStatsEntry | not-accessible | current | The conceptual row of jnxSoamDmCurrentStatsTable |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.1 | ColumnjnxSoamDmCurrentStatsIndex | read-only | current | The index for the current Measurement Interval for this PM session. This value will become the value for jnxSoamDmHistoryStatsIndex once the Measurement Interv… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.2 | ColumnjnxSoamDmCurrentStatsStartTime | read-only | current | The time that the current Measurement Interval started. |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.3 | ColumnjnxSoamDmCurrentStatsElapsedTime | read-only | current | The time that the current Measurement Interval has been running, in 0.01 seconds. |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.4 | ColumnjnxSoamDmCurrentStatsSuspect | read-only | current | Whether the Measurement Interval has been marked as suspect. The object is to be set to false at the start of a measurement interval. It is set to true when th… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.5 | ColumnjnxSoamDmCurrentStatsFrameDelayTwoWayMin | read-only | current | This object contains the minimum two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is jnxSoamDmCfgType is dm1D… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.6 | ColumnjnxSoamDmCurrentStatsFrameDelayTwoWayMax | read-only | current | This object contains the maximum two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is jnxSoamDmCfgType is dm1D… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.7 | ColumnjnxSoamDmCurrentStatsFrameDelayTwoWayAvg | read-only | current | This object contains the average two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is jnxSoamDmCfgType is dm1D… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.8 | ColumnjnxSoamDmCurrentStatsFrameDelayForwardMin | read-only | current | This object contains the minimum one-way frame delay in the forward direction calculated by this MEP for this Measurement Interval. The value of this object ma… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.9 | ColumnjnxSoamDmCurrentStatsFrameDelayForwardMax | read-only | current | This object contains the maximum one-way frame delay in the forward direction calculated by this MEP for this Measurement Interval. The value of this object ma… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.10 | ColumnjnxSoamDmCurrentStatsFrameDelayForwardAvg | read-only | current | This object contains the average one-way frame delay in the forward direction calculated by this MEP for this Measurement Interval. The value of this object ma… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.11 | ColumnjnxSoamDmCurrentStatsFrameDelayBackwardMin | read-only | current | This object contains the minimum one-way frame delay in the backward direction calculated by this MEP for this Measurement Interval. The value of this object m… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.12 | ColumnjnxSoamDmCurrentStatsFrameDelayBackwardMax | read-only | current | This object contains the maximum one-way frame delay in the backward direction calculated by this MEP for this Measurement Interval. The value of this object m… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.13 | ColumnjnxSoamDmCurrentStatsFrameDelayBackwardAvg | read-only | current | This object contains the average one-way frame delay in the backward direction calculated by this MEP for this Measurement Interval. The value of this object m… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.14 | ColumnjnxSoamDmCurrentStatsIfdvForwardMin | read-only | current | This object contains the minimum one-way inter-frame delay interval in the forward direction calculated by this MEP for this Measurement Interval. The value of… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.15 | ColumnjnxSoamDmCurrentStatsIfdvForwardMax | read-only | current | This object contains the maximum one-way inter-frame delay interval in the forward direction calculated by this MEP for this Measurement Interval. The value of… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.16 | ColumnjnxSoamDmCurrentStatsIfdvForwardAvg | read-only | current | This object contains the average one-way inter-frame delay interval in the forward direction calculated by this MEP for this Measurement Interval. The value of… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.17 | ColumnjnxSoamDmCurrentStatsIfdvBackwardMin | read-only | current | This object contains the minimum one-way inter-frame delay interval in the backward direction calculated by this MEP for this Measurement Interval. The value o… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.18 | ColumnjnxSoamDmCurrentStatsIfdvBackwardMax | read-only | current | This object contains the maximum one-way inter-frame delay interval in the backward direction calculated by this MEP for this Measurement Interval. The value o… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.19 | ColumnjnxSoamDmCurrentStatsIfdvBackwardAvg | read-only | current | This object contains the average one-way inter-frame delay interval in the backward direction calculated by this MEP for this Measurement Interval. The value o… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.20 | ColumnjnxSoamDmCurrentStatsIfdvTwoWayMin | read-only | current | This object contains the minimum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.21 | ColumnjnxSoamDmCurrentStatsIfdvTwoWayMax | read-only | current | This object contains the maximum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.22 | ColumnjnxSoamDmCurrentStatsIfdvTwoWayAvg | read-only | current | This object contains the average two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.23 | ColumnjnxSoamDmCurrentStatsSoamPdusSent | read-only | current | This object contains the count of the number of SOAM PDUs sent during this Measurement Interval. This object applies when jnxSoamDmCfgType is dmDmm or dm1DmTx … |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.24 | ColumnjnxSoamDmCurrentStatsSoamPdusReceived | read-only | current | This object contains the count of the number of SOAM PDUs received in this Measurement Interval. This object indicates the number of DMR and 1DM SOAM frames re… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.25 | ColumnjnxSoamDmCurrentStatsFrameDelayRangeForwardMax | read-only | current | This object contains the maximum one-way frame delay range in the forward direction calculated by this MEP for this Measurement Interval. The value of this obj… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.26 | ColumnjnxSoamDmCurrentStatsFrameDelayRangeForwardAvg | read-only | current | This object contains the average one-way frame delay range in the forward direction calculated by this MEP for this Measurement Interval. The value of this obj… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.27 | ColumnjnxSoamDmCurrentStatsFrameDelayRangeBackwardMax | read-only | current | This object contains the maximum one-way frame delay range in the backward direction calculated by this MEP for this Measurement Interval. The value of this ob… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.28 | ColumnjnxSoamDmCurrentStatsFrameDelayRangeBackwardAvg | read-only | current | This object contains the average one-way frame delay range in the backward direction calculated by this MEP for this Measurement Interval. The value of this ob… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.29 | ColumnjnxSoamDmCurrentStatsFrameDelayRangeTwoWayMax | read-only | current | This object contains the maximum two-way frame delay range calculated by this MEP for this Measurement Interval. The value of this object is undefined when jnx… |
| 1.3.6.1.4.1.2636.3.78.1.3.3.1.30 | ColumnjnxSoamDmCurrentStatsFrameDelayRangeTwoWayAvg | read-only | current | This object contains the average two-way frame delay range calculated by this MEP for this Measurement Interval. The value of this object is undefined when jnx… |
| 1.3.6.1.4.1.2636.3.78.1.3.4 | TablejnxSoamDmHistoryStatsTable | not-accessible | current | This table contains the results for history Measurement Intervals in a SOAM Delay Measurement session. Rows of this table are created automatically by the SNMP… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1 | RowjnxSoamDmHistoryStatsEntry | not-accessible | current | The conceptual row of jnxSoamDmHistoryStatsTable |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.1 | ColumnjnxSoamDmHistoryStatsIndex | read-only | current | The index for the Measurement Interval within this PM session. Measurement Interval indexes are assigned sequentially by the SNMP Agent. The first Measurement … |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.2 | ColumnjnxSoamDmHistoryStatsEndTime | read-only | current | The time that the Measurement Interval ended. |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.3 | ColumnjnxSoamDmHistoryStatsElapsedTime | read-only | current | The length of time that the Measurement Interval ran for, in 0.01 seconds. |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.4 | ColumnjnxSoamDmHistoryStatsSuspect | read-only | current | Whether the Measurement Interval has been marked as suspect. The object is set to true when there is a discontinuity in the performance measurements during the… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.5 | ColumnjnxSoamDmHistoryStatsFrameDelayTwoWayMin | read-only | current | This object contains the minimum two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is jnxSoamDmCfgType is dm1D… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.6 | ColumnjnxSoamDmHistoryStatsFrameDelayTwoWayMax | read-only | current | This object contains the maximum two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is jnxSoamDmCfgType is dm1D… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.7 | ColumnjnxSoamDmHistoryStatsFrameDelayTwoWayAvg | read-only | current | This object contains the average two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is jnxSoamDmCfgType is dm1D… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.8 | ColumnjnxSoamDmHistoryStatsFrameDelayForwardMin | read-only | current | This object contains the minimum one-way frame delay in the forward direction calculated by this MEP for this Measurement Interval. The value of this object ma… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.9 | ColumnjnxSoamDmHistoryStatsFrameDelayForwardMax | read-only | current | This object contains the maximum one-way frame delay in the forward direction calculated by this MEP for this Measurement Interval. The value of this object ma… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.10 | ColumnjnxSoamDmHistoryStatsFrameDelayForwardAvg | read-only | current | This object contains the average one-way frame delay in the forward direction calculated by this MEP for this Measurement Interval. The value of this object ma… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.11 | ColumnjnxSoamDmHistoryStatsFrameDelayBackwardMin | read-only | current | This object contains the minimum one-way frame delay in the backward direction calculated by this MEP for this Measurement Interval. The value of this object m… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.12 | ColumnjnxSoamDmHistoryStatsFrameDelayBackwardMax | read-only | current | This object contains the maximum one-way frame delay in the backward direction calculated by this MEP for this Measurement Interval. The value of this object m… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.13 | ColumnjnxSoamDmHistoryStatsFrameDelayBackwardAvg | read-only | current | This object contains the average one-way frame delay in the backward direction calculated by this MEP for this Measurement Interval. The value of this object m… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.14 | ColumnjnxSoamDmHistoryStatsIfdvForwardMin | read-only | current | This object contains the minimum one-way inter-frame delay interval in the forward direction calculated by this MEP for this Measurement Interval. The value of… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.15 | ColumnjnxSoamDmHistoryStatsIfdvForwardMax | read-only | current | This object contains the maximum one-way inter-frame delay interval in the forward direction calculated by this MEP for this Measurement Interval. The value of… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.16 | ColumnjnxSoamDmHistoryStatsIfdvForwardAvg | read-only | current | This object contains the average one-way inter-frame delay interval in the forward direction calculated by this MEP for this Measurement Interval. The value of… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.17 | ColumnjnxSoamDmHistoryStatsIfdvBackwardMin | read-only | current | This object contains the minimum one-way inter-frame delay interval in the backward direction calculated by this MEP for this Measurement Interval. The value o… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.18 | ColumnjnxSoamDmHistoryStatsIfdvBackwardMax | read-only | current | This object contains the maximum one-way inter-frame delay interval in the backward direction calculated by this MEP for this Measurement Interval. The value o… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.19 | ColumnjnxSoamDmHistoryStatsIfdvBackwardAvg | read-only | current | This object contains the average one-way inter-frame delay interval in the backward direction calculated by this MEP for this Measurement Interval. The value o… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.20 | ColumnjnxSoamDmHistoryStatsIfdvTwoWayMin | read-only | current | This object contains the minimum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.21 | ColumnjnxSoamDmHistoryStatsIfdvTwoWayMax | read-only | current | This object contains the maximum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.22 | ColumnjnxSoamDmHistoryStatsIfdvTwoWayAvg | read-only | current | This object contains the average two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.23 | ColumnjnxSoamDmHistoryStatsSoamPdusSent | read-only | current | This object contains the count of the number of SOAM PDUs sent during this Measurement Interval. This object applies when jnxSoamDmCfgType is dmDmm or dm1DmTx … |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.24 | ColumnjnxSoamDmHistoryStatsSoamPdusReceived | read-only | current | This object contains the count of the number of SOAM PDUs received in this Measurement Interval. This object indicates the number of DMR and 1DM SOAM frames re… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.25 | ColumnjnxSoamDmHistoryStatsFrameDelayRangeForwardMax | read-only | current | This object contains the maximum one-way Frame Delay Range in the forward direction calculated by this MEP for this Measurement Interval. The value of this obj… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.26 | ColumnjnxSoamDmHistoryStatsFrameDelayRangeForwardAvg | read-only | current | This object contains the average one-way Frame Delay Range in the forward direction calculated by this MEP for this Interval. The value of this object is undef… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.27 | ColumnjnxSoamDmHistoryStatsFrameDelayRangeBackwardMax | read-only | current | This object contains the maximum one-way Frame Delay Range in the backward direction calculated by this MEP for this Measurement Interval. The value of this ob… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.28 | ColumnjnxSoamDmHistoryStatsFrameDelayRangeBackwardAvg | read-only | current | This object contains the average one-way Frame Delay Range in the backward direction calculated by this MEP for this Measurement Interval. The value of this ob… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.29 | ColumnjnxSoamDmHistoryStatsFrameDelayRangeTwoWayMax | read-only | current | This object contains the maximum two-way Frame Delay Range calculated by this MEP for this Measurement Interval. The value of this object is undefined when jnx… |
| 1.3.6.1.4.1.2636.3.78.1.3.4.1.30 | ColumnjnxSoamDmHistoryStatsFrameDelayRangeTwoWayAvg | read-only | current | This object contains the average two-way Frame Delay Range Interval. The value of this object is undefined when jnxSoamDmCfgType is dm1DmTx or dm1DmRx. |
| 1.3.6.1.4.1.2636.3.78.1.3.5 | TablejnxSoamDmThresholdCfgTable | not-accessible | current | This table contains the list of Delay Measurement threshold configuration values for DM Performance Monitoring. The main purpose of the threshold configuration… |
| 1.3.6.1.4.1.2636.3.78.1.3.5.1 | RowjnxSoamDmThresholdCfgEntry | not-accessible | current | The conceptual row of jnxSoamDmThresholdCfgTable. |
| 1.3.6.1.4.1.2636.3.78.1.3.5.1.1 | ColumnjnxSoamDmThresholdCfgIndex | read-only | current | The index of the threshold number for the specific DM threshold entry. An index value of '1' is to be supported. Other index values can be supported. |
| 1.3.6.1.4.1.2636.3.78.1.3.5.1.2 | ColumnjnxSoamDmThresholdCfgEnable | read-only | current | A vector of bits that indicates the type of SOAM DM threshold notifications that are enabled. A bit set to '1' enables the specific SOAM DM threshold notificat… |
| 1.3.6.1.4.1.2636.3.78.1.3.5.1.3 | ColumnjnxSoamDmThresholdCfgAvgFrameDelayTwoWayThreshold | read-only | current | This object is used to set the average two-way delay threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.2636.3.78.1.3.5.1.4 | ColumnjnxSoamDmThresholdCfgAvgIfdvTwoWayThreshold | read-only | current | This object is used to set the average two-way IFDV threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.2636.3.78.1.3.5.1.5 | ColumnjnxSoamDmThresholdCfgRowStatus | read-only | current | The status of the row. The writable columns in a row cannot be changed if the row is active. All columns are to have a valid value before a row can be activate… |
| 1.3.6.1.4.1.2636.3.78.1.3.6 | TablejnxSoamDmCfgMeasBinTable | not-accessible | current | This table includes configuration objects for the Delay Measurement bins to collect stats. Each row in the table is automatically created when the Delay Measur… |
| 1.3.6.1.4.1.2636.3.78.1.3.6.1 | RowjnxSoamDmCfgMeasBinEntry | not-accessible | current | The conceptual row of jnxSoamDmCfgMeasBinTable. |
| 1.3.6.1.4.1.2636.3.78.1.3.6.1.1 | ColumnjnxSoamDmCfgMeasBinType | not-accessible | current | This object specifies whether the bin number is for Frame Delay or Inter-Frame Delay Variation. |
| 1.3.6.1.4.1.2636.3.78.1.3.6.1.2 | ColumnjnxSoamDmCfgMeasBinNumber | not-accessible | current | This object specifies the bin number for the configured boundary. The first bin has bin number 1. |
| 1.3.6.1.4.1.2636.3.78.1.3.6.1.3 | ColumnjnxSoamDmCfgMeasBinLowerBound | read-write | current | This object specifies the lower boundary for a measurement bin. The upper boundary is defined by the next bin value or infinite for the last bin defined. The m… |
| 1.3.6.1.4.1.2636.3.78.1.3.7 | TablejnxSoamDmCurrentStatsBinsTable | not-accessible | current | This table contains the result bins for the current Measurement Interval in a SOAM Delay Measurement session. Each row in the table represents the current bin … |
| 1.3.6.1.4.1.2636.3.78.1.3.7.1 | RowjnxSoamDmCurrentStatsBinsEntry | not-accessible | current | The conceptual row of jnxSoamDmCurrentStatsBinsTable |
| 1.3.6.1.4.1.2636.3.78.1.3.7.1.1 | ColumnjnxSoamDmCurrentStatsBinsCounter | read-only | current | This object contains the count of the number of completed measurements initiated in this Measurement Interval whose value falls within the range specified for … |
| 1.3.6.1.4.1.2636.3.78.1.3.8 | TablejnxSoamDmHistoryStatsBinsTable | not-accessible | current | This table contains the result bins for the history Measurement Intervals in a SOAM Delay Measurement session. Rows of this table are created automatically by … |
| 1.3.6.1.4.1.2636.3.78.1.3.8.1 | RowjnxSoamDmHistoryStatsBinsEntry | not-accessible | current | The conceptual row of jnxSoamDmHistoryStatsBinsTable |
| 1.3.6.1.4.1.2636.3.78.1.3.8.1.1 | ColumnjnxSoamDmHistoryStatsBinsCounter | read-only | current | This object contains the count of the number of completed measurements initiated in this Measurement Interval whose value falls within the range specified for … |
| 1.3.6.1.4.1.2636.3.78.1.4 | NodejnxSoamPmNotificationCfg | |||
| 1.3.6.1.4.1.2636.3.78.1.5 | NodejnxSoamPmNotificationObj | |||
| 1.3.6.1.4.1.2636.3.78.1.5.1 | ScalarjnxSoamPmNotificationObjDateAndTime | accessible-for-notify | current | This object contains the time and date at the time that the notification event is detected, not the time of the notification generation. This object is used on… |
| 1.3.6.1.4.1.2636.3.78.1.5.2 | ScalarjnxSoamPmNotificationObjThresholdId | accessible-for-notify | current | The Object Identifier of the object that caused the generation of the notification from the jnxSoamLmThresholdEntry or jnxSoamDmThresholdEntry. This object is … |
| 1.3.6.1.4.1.2636.3.78.1.5.3 | ScalarjnxSoamPmNotificationObjThresholdConfig | accessible-for-notify | current | The configured threshold value of the object that caused the generation of the notification. This object is only used for the notification. |
| 1.3.6.1.4.1.2636.3.78.1.5.4 | ScalarjnxSoamPmNotificationObjThresholdValue | accessible-for-notify | current | The measured value of the object at the time of the generation of the Notification, from the jnxSoamLmMeasuredStatsTable, jnxSoamLmCurrentStatsTable, jnxSoamDm… |
| 1.3.6.1.4.1.2636.3.78.1.5.5 | ScalarjnxSoamPmNotificationObjSuspect | accessible-for-notify | current | The suspect flag for the current Measurement Interval in which the notification was generated from the jnxSoamLmCurrentStatsTable, or jnxSoamDmCurrentStatsTabl… |
| 1.3.6.1.4.1.2636.3.78.1.5.6 | ScalarjnxSoamPmNotificationObjCrossingType | accessible-for-notify | current | The Notification Crossing Type of the object that caused the generation of the notification from the jnxSoamLmThresholdEntry or jnxSoamDmThresholdEntry. aboveA… |
| 1.3.6.1.4.1.2636.3.78.1.5.7 | ScalarjnxSoamPmNotificationObjDestinationMep | accessible-for-notify | current | The MAC address of the Destination MEP associated the notification found in either the jnxSoamDmCfgTable or jnxSoamLmCfgTable. This object is only used for the… |
| 1.3.6.1.4.1.2636.3.78.1.5.8 | ScalarjnxSoamPmNotificationObjPriority | accessible-for-notify | current | The CoS priority of the associated notification found in either the jnxSoamDmCfgTable or jnxSoamLmCfgTable. This object is only used for the notification. |
| 1.3.6.1.4.1.2636.3.78.2 | NodejnxSoamPmMibConformance |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IEEE8021PriorityValue | Unsigned32 (0..65535) | current | An 802.1Q user priority value. |
| JnxSoamTcAvailabilityType | INTEGER { available(1), unavailable(2), unknown(3) } | current | This enumeration data type defines the availability of a session, measured by a loss measurement session. The valid enumerated values associated with this type are: available(1) indicates the MEP is available. unavailab… |
| JnxSoamTcDataPatternType | INTEGER { zeroPattern(1), onesPattern(2) } | current | This enumeration data type indicates the type of data pattern to be sent in an OAM PDU Data TLV. The valid enumerated values associated with this type are: zeroPattern(1) indicates the Data TLV contains all zeros onesPa… |
| JnxSoamTcDelayMeasurementBinType | INTEGER { twoWayFrameDelay(1), forwardFrameDelay(2), backwardFrameDelay(3), twoWayIfdv(4), forwardIfdv(5), backwardIfdv(6), twoWayFrameDelayRange(7), forwardFrameDelayRange(8), backwardFrameDelayRange(9) } | current | This enumeration data type is used to distinguish between measurement bins for Frame Delay, Frame Delay Range, and Inter-frame Delay variation. The valid enumerated values associated with this type are: twoWayFrameDelay… |
| JnxSoamTcOperationTimeType | INTEGER { none(1), immediate(2), relative(3), fixed(4) } | current | This enumeration data type indicates the operation type start or end time to indicate when an OAM operation is initiated or stopped. The valid enumerated values associated with this type are: none(1) The operation is ne… |
| JnxSoamTcTestPatternType | INTEGER { null(1), nullCrc32(2), prbs(3), prbsCrc32(4) } | current | This enumeration data type indicates the type of test pattern to be sent in an OAM PDU Test TLV. The valid enumerated values associated with this type are: null(1) Null signal without CRC-32 nullCrc32(2) Null signal wit… |