LBHUB-ECS-MIB
318 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress mgmt NetworkAddress TimeTicks |
| RFC1213-MIB | DisplayString ifIndex PhysAddress -- snmp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1 | Nodemib-2 | |||
| 1.3.6.1.2.1.1 | Nodesystem | |||
| 1.3.6.1.2.1.2 | Nodeinterfaces | |||
| 1.3.6.1.2.1.3 | Nodeat | |||
| 1.3.6.1.2.1.4 | Nodeip | |||
| 1.3.6.1.2.1.5 | Nodeicmp | |||
| 1.3.6.1.2.1.6 | Nodetcp | |||
| 1.3.6.1.2.1.7 | Nodeudp | |||
| 1.3.6.1.2.1.8 | Nodeegp | |||
| 1.3.6.1.2.1.10 | Nodetransmission | |||
| 1.3.6.1.2.1.11 | Nodesnmp | |||
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.1 | Nodeproducts | |||
| 1.3.6.1.4.1.43.1.1 | NodeterminalServer | |||
| 1.3.6.1.4.1.43.1.2 | NodededicatedBridgeServer | |||
| 1.3.6.1.4.1.43.1.3 | NodededicatedRouteServer | |||
| 1.3.6.1.4.1.43.1.4 | Nodebrouter | |||
| 1.3.6.1.4.1.43.1.5 | NodegenericMSWorkstation | |||
| 1.3.6.1.4.1.43.1.6 | NodegenericMSServer | |||
| 1.3.6.1.4.1.43.1.7 | NodegenericUnixServer | |||
| 1.3.6.1.4.1.43.1.8 | Nodehub | |||
| 1.3.6.1.4.1.43.1.8.1 | NodelinkBuilder3GH | |||
| 1.3.6.1.4.1.43.1.8.2 | NodelinkBuilder10BTi | |||
| 1.3.6.1.4.1.43.1.8.3 | NodelinkBuilderECS | |||
| 1.3.6.1.4.1.43.1.8.3.0 | NodepowerSupplyFailure | One of the PSUs has failed, the value of ecsPSUStatus is returned to indicate which PSU has failed. | ||
| 1.3.6.1.4.1.43.1.8.3.1 | NodefanFailure | A LinkBuilder ECS Fan has failed, requiring immediate attenstion. | ||
| 1.3.6.1.4.1.43.1.8.3.2 | NodeconfigurationChanged | The LinkBuilder ECS configuartion has changed. Either a card has been added or removed, a port disabled or enabled from the front panel or a AUI port has been … | ||
| 1.3.6.1.4.1.43.1.8.3.3 | NodeportTrap | A port has partitioned/unpartitioned or has changed link state. The values of ecsInfoSlotIndex and ecsInfoPortIndex are returned to indicate the slot and port,… | ||
| 1.3.6.1.4.1.43.1.8.3.4 | NoderesilientLinkTrap | The LinkBuilder ECS Resilient Link system has operated. The resilient link is returned to determine the action taken. | ||
| 1.3.6.1.4.1.43.1.8.3.5 | NoderateTrap | A Guage threshold has been exceeded. The slot and port number are given by the vakues if ecsInfoSlotIndex and ecsInfoPortIndex and the guage that has been exce… | ||
| 1.3.6.1.4.1.43.1.8.3.6 | NodestationlocateTrap | The Station Locate databse has either changed or has become full. The particular condition is shown by the value of ecsRLCSLDataBAseStatus returned. | ||
| 1.3.6.1.4.1.43.1.8.3.7 | NodesecureRLCTrap | There has been access to the security menus from the front panel menus. The value of ecsAgentSecureManagementStatus reports whether the trap was generated beac… | ||
| 1.3.6.1.4.1.43.1.8.3.8 | NodesecureRLCportTrap | A secure port has either detected an authorised port and taken appropriate action or has learnt an authorised station on the slot and port indicated. | ||
| 1.3.6.1.4.1.43.1.8.4 | NodelinkBuilderMSH | |||
| 1.3.6.1.4.1.43.1.8.5 | NodelinkBuilderFMS | |||
| 1.3.6.1.4.1.43.1.8.7 | NodelinkBuilderFMSII | |||
| 1.3.6.1.4.1.43.1.8.10 | NodelinkBuilderFMSLBridge | |||
| 1.3.6.1.4.1.43.1.9 | Nodecards | |||
| 1.3.6.1.4.1.43.1.9.1 | NodelinkBuilder3GH-cards | |||
| 1.3.6.1.4.1.43.1.9.2 | NodelinkBuilder10BTi-cards | |||
| 1.3.6.1.4.1.43.1.9.2.1 | NodelinkBuilder10BTi-cards-utp | |||
| 1.3.6.1.4.1.43.1.9.2.2 | NodelinkBuilder10BT-cards-utp | |||
| 1.3.6.1.4.1.43.1.9.3 | NodelinkBuilderECS-cards | |||
| 1.3.6.1.4.1.43.1.9.4 | NodelinkBuilderMSH-cards | |||
| 1.3.6.1.4.1.43.1.9.5 | NodelinkBuilderFMS-cards | |||
| 1.3.6.1.4.1.43.1.9.5.1 | NodelinkBuilderFMS-cards-utp | |||
| 1.3.6.1.4.1.43.1.9.5.2 | NodelinkBuilderFMS-cards-coax | |||
| 1.3.6.1.4.1.43.1.9.5.3 | NodelinkBuilderFMS-cards-fiber | |||
| 1.3.6.1.4.1.43.1.9.5.4 | NodelinkBuilderFMS-cards-12fiber | |||
| 1.3.6.1.4.1.43.1.9.5.5 | NodelinkBuilderFMS-cards-24utp | |||
| 1.3.6.1.4.1.43.1.9.6 | NodelinkBuilderFMSII-cards | |||
| 1.3.6.1.4.1.43.1.9.6.1 | NodelinkBuilderFMSII-cards-12tp-rj45 | |||
| 1.3.6.1.4.1.43.1.9.6.2 | NodelinkBuilderFMSII-cards-10coax-bnc | |||
| 1.3.6.1.4.1.43.1.9.6.3 | NodelinkBuilderFMSII-cards-6fiber-st | |||
| 1.3.6.1.4.1.43.1.9.6.4 | NodelinkBuilderFMSII-cards-12fiber-st | |||
| 1.3.6.1.4.1.43.1.9.6.5 | NodelinkBuilderFMSII-cards-24tp-rj45 | |||
| 1.3.6.1.4.1.43.1.9.6.6 | NodelinkBuilderFMSII-cards-24tp-telco | |||
| 1.3.6.1.4.1.43.3 | Nodeamp-mib | |||
| 1.3.6.1.4.1.43.4 | NodegenericTrap | |||
| 1.3.6.1.4.1.43.5 | NodeviewBuilderApps | |||
| 1.3.6.1.4.1.43.6 | NodespecificTrap | |||
| 1.3.6.1.4.1.43.7 | NodelinkBuilder3GH-mib | |||
| 1.3.6.1.4.1.43.8 | NodelinkBuilder10BTi-mib | |||
| 1.3.6.1.4.1.43.9 | NodelinkBuilderECS-mib | |||
| 1.3.6.1.4.1.43.9.1 | NodeecsAgent | |||
| 1.3.6.1.4.1.43.9.1.1 | NodeecsAgentSystemIdentifier | |||
| 1.3.6.1.4.1.43.9.1.1.1 | ScalarecsManufacturerId | read-only | deprecated | An atrribute to identify the manufacturer |
| 1.3.6.1.4.1.43.9.1.1.2 | ScalarecsManufacturerProductId | read-only | mandatory | An attribute to identify the product id. |
| 1.3.6.1.4.1.43.9.1.1.3 | ScalarecsSoftwareVersionNumber | read-only | deprecated | An atrribute to identify the software version. |
| 1.3.6.1.4.1.43.9.1.1.4 | ScalarecsHardwareVersionNumber | read-only | deprecated | An atrribute to identify the hardware version. |
| 1.3.6.1.4.1.43.9.1.2 | ScalarecsAgentSystemName | read-write | deprecated | This is an informational string that could be used to show the name of the ECSAgent or management agent. |
| 1.3.6.1.4.1.43.9.1.3 | ScalarecsAgentSystemLocation | read-write | deprecated | This is an informational string that could be used to show the physical location (i.e., area) of the ecsAgent or management agent. |
| 1.3.6.1.4.1.43.9.1.4 | ScalarecsAgentSystemTime | read-write | deprecated | A representation of the system time of the management system, taken from the epoch. |
| 1.3.6.1.4.1.43.9.1.5 | ScalarecsAgentStatus | read-only | mandatory | Indicates that the management agent is on line and operating. |
| 1.3.6.1.4.1.43.9.1.6 | ScalarecsAgentAuthenticationStatus | read-only | mandatory | Indicates whether management frames are checked against entries in the management tranmiter table. |
| 1.3.6.1.4.1.43.9.1.7 | ScalarecsAgentSecureManagementStatus | read-only | mandatory | Indicates whether the remote management of the security features of the ECS are enabled or not. |
| 1.3.6.1.4.1.43.9.1.11 | ScalarecsAgentFrontPanelSetupPassword | read-write | mandatory | The password used to gain access to the configuration features of the front panel control of the device. |
| 1.3.6.1.4.1.43.9.1.12 | ScalarecsAgentFrontPanelDisplay | read-write | mandatory | The string displayed on the front panel. |
| 1.3.6.1.4.1.43.9.1.13 | ScalarecsAgentFrontPanelPassword | read-write | mandatory | The password used to gain access to the front panel control of the device. |
| 1.3.6.1.4.1.43.9.1.14 | ScalarecsAgentFrontPanelSecurePassword | read-write | mandatory | The password used to gain access to the security features of the front panel control of the device. This attribute is not viewable until secure remote manageme… |
| 1.3.6.1.4.1.43.9.1.15 | ScalarecsAgentFrontPanelLock | read-write | mandatory | The station front panel status. |
| 1.3.6.1.4.1.43.9.1.16 | ScalarecsAgentResetDevice | read-write | mandatory | Network management module reset status. Writing a 2 to this object will reset the management agent. |
| 1.3.6.1.4.1.43.9.1.18 | ScalarecsAgentRestart | read-write | mandatory | Network management module restart status. Writing a 2 to his object will restart the management agent. This initializes all the counters, rereads the NVRAM dat… |
| 1.3.6.1.4.1.43.9.1.19 | ScalarecsAgentDefaultConfig | read-write | mandatory | The device is returned to its factory settings. |
| 1.3.6.1.4.1.43.9.1.20 | TableecsAgentManagementTable | not-accessible | mandatory | This entity's management address table. (10 entries) |
| 1.3.6.1.4.1.43.9.1.20.1 | RowecsAgentManagementEntry | not-accessible | mandatory | A source address address and privileges of a particular management station. |
| 1.3.6.1.4.1.43.9.1.20.1.1 | ColumnecsAgentManagementAddr | read-write | mandatory | IpAddress of the management station. |
| 1.3.6.1.4.1.43.9.1.20.1.2 | ColumnecsAgentManagementAccess | read-write | mandatory | Setting this object to the value invalid(1) invalidates the corresponding entry in the ecsAgentManagementTable. That is, it effectively disassociates the addre… |
| 1.3.6.1.4.1.43.9.1.20.1.3 | ColumnecsAgentManAccessLevel | read-write | mandatory | The level of aceess attributed to tthis entry in the table. |
| 1.3.6.1.4.1.43.9.1.21 | TableecsAgentTrapReceiverTable | not-accessible | mandatory | This entity's Trap Receiver Table. (10 entries) |
| 1.3.6.1.4.1.43.9.1.21.1 | RowecsAgentTrapReceiverEntry | not-accessible | mandatory | A destination address and community string for a particular trap receiver. |
| 1.3.6.1.4.1.43.9.1.21.1.1 | ColumnecsAgentTrapReceiverAddr | read-write | mandatory | IpAddress for trap receiver. |
| 1.3.6.1.4.1.43.9.1.21.1.2 | ColumnecsAgentTrapType | read-write | mandatory | Setting this object to the value invalid(1) invalidates the corresponding entry in the ECSAgentTrapReceiverTable. That is, it effectively disassociates the add… |
| 1.3.6.1.4.1.43.9.1.21.1.3 | ColumnecsAgentTrapReceiverComm | read-write | mandatory | Community string used for traps. |
| 1.3.6.1.4.1.43.9.1.21.1.4 | ColumnecsAgentTrapLevel | read-only | mandatory | Indicates the type of traps that will be sent to this address. |
| 1.3.6.1.4.1.43.9.1.22 | ScalarecsAgentAuthTrapState | read-write | deprecated | Enable or disable the use of authentication error trap generation. |
| 1.3.6.1.4.1.43.9.1.23 | ScalarecsAgentIpAddr | read-write | mandatory | The network management module's administrative IpAddress. The current operational IpAddress can be obtained from the ipAdEntAddr entry in the ipAddrTable. |
| 1.3.6.1.4.1.43.9.1.24 | ScalarecsAgentIpNetmask | read-write | mandatory | The network management module's administrative subnet mask. The current operational subnet mask can be obtained from the ipAdEntNetMask entry in the ipAddrTabl… |
| 1.3.6.1.4.1.43.9.1.25 | ScalarecsAgentDefaultGateway | read-write | mandatory | The network management module's administrative default gateway IpAddress. The current operational default gateway's IpAddress can be obtained from the ipRoutin… |
| 1.3.6.1.4.1.43.9.1.26 | ScalarecsAgentIpBroadAddr | read-write | mandatory | The network management module's adminstrative default broadcast address |
| 1.3.6.1.4.1.43.9.1.27 | ScalarecsAgentMACAddress | read-only | mandatory | The MAC address of the ECS Agent. |
| 1.3.6.1.4.1.43.9.1.28 | ScalarecsAgentSecureTrapState | read-write | mandatory | Enable or disable the generation of security traps. |
| 1.3.6.1.4.1.43.9.1.29 | ScalarecsAgentLastSystemError | read-only | mandatory | The error number of the last system error. |
| 1.3.6.1.4.1.43.9.1.30 | ScalarecsAgentLastTrap | read-only | mandatory | The time, taken from the epoch when the last trap or event would have been generated. |
| 1.3.6.1.4.1.43.9.2 | NodeecsEnvironment | |||
| 1.3.6.1.4.1.43.9.2.1 | ScalarecsRackType | read-only | mandatory | The rack type of the LinkBuilder ECS. |
| 1.3.6.1.4.1.43.9.2.2 | TableecsRackConfigurationTable | not-accessible | mandatory | The current configuration of the Ether Connect System rack. |
| 1.3.6.1.4.1.43.9.2.2.1 | RowecsSlotConfigEntry | not-accessible | mandatory | The description of the type of module in each slot. |
| 1.3.6.1.4.1.43.9.2.2.1.1 | ColumnecsSlotConfigIndex | read-only | mandatory | The device type found in a slot. |
| 1.3.6.1.4.1.43.9.2.2.1.2 | ColumnecsSlotCardName | read-write | mandatory | This is an informational string that could be used to show the name of a card. |
| 1.3.6.1.4.1.43.9.2.2.1.3 | ColumnecsSlotDeviceType | read-only | mandatory | The device type found in a slot. |
| 1.3.6.1.4.1.43.9.2.2.1.4 | ColumnecsSlotSoftVerNum | read-only | mandatory | A description of the software version number. |
| 1.3.6.1.4.1.43.9.2.2.1.5 | ColumnecsSlotHardVerNum | read-only | mandatory | Hardware version number of the card. |
| 1.3.6.1.4.1.43.9.2.2.1.6 | ColumnecsSlotNumOfPorts | read-only | mandatory | The number of repeater ports on the card. |
| 1.3.6.1.4.1.43.9.2.2.1.7 | ColumnecsSlotMediaType | read-only | mandatory | The media type associated with this slot can take on the following values: No port, AUI, Cheapernet, FOIRL, UTP, STP, FOASTAR, Through air, Plastic Fibre. |
| 1.3.6.1.4.1.43.9.2.2.1.8 | ColumnecsCardReset | read-write | mandatory | The hardware for specified repeater line card is reset. |
| 1.3.6.1.4.1.43.9.2.2.1.9 | ColumnecsLampOverRide | read-write | mandatory | The lamps on the specified repeater line card are forced on for normal operation. |
| 1.3.6.1.4.1.43.9.2.2.1.10 | ColumnecsCardIsolated | read-write | mandatory | The LinkBuilder ECS card is isolated from the chassis backplane. |
| 1.3.6.1.4.1.43.9.2.2.1.11 | ColumnecsCardIpAddress | read-only | mandatory | For some devices the LinkBuilder ECS may be able to determine the IP address of a intelligent card that is in the slot. If the value returned is 0.0.0.0 then t… |
| 1.3.6.1.4.1.43.9.2.3 | ScalarecsPSUStatus | read-only | mandatory | The status of the PSUs in the LinkBuilder ECS. |
| 1.3.6.1.4.1.43.9.2.4 | ScalarecsFanStatus | read-only | mandatory | The status of the fans in the LinkBuilder ECS. |
| 1.3.6.1.4.1.43.9.3 | NodeecsRLCResilientLinks | |||
| 1.3.6.1.4.1.43.9.3.1 | ScalarecsRLCNumberOfResilientLinks | read-only | mandatory | The number of resilient links currently configured on the LinkBuilder ECS. |
| 1.3.6.1.4.1.43.9.3.2 | ScalarecsRLCNumberOfDOBPorts | read-only | mandatory | The total number of ports that are disabled on boot, making them suitable for use with resilient links. |
| 1.3.6.1.4.1.43.9.3.3 | TableecsRLCResilientLinkTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.9.3.3.1 | RowecsRLCResilientLinkEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.9.3.3.1.1 | ColumnecsRLMainLinkSlot | read-write | mandatory | The Slot Number for the main link of this resilient link. |
| 1.3.6.1.4.1.43.9.3.3.1.2 | ColumnecsRLMainLinkPort | read-write | mandatory | The Port Number for the main link of this resilient link. |
| 1.3.6.1.4.1.43.9.3.3.1.3 | ColumnecsRLStandbySlot | read-write | mandatory | The Slot Number for the standby link of this resilient link. |
| 1.3.6.1.4.1.43.9.3.3.1.4 | ColumnecsRLStandbyPort | read-write | mandatory | The Port Number for the standby link of this resilient link. |
| 1.3.6.1.4.1.43.9.3.3.1.5 | ColumnecsRLActiveLink | read-only | mandatory | The resilient link currently in use for traffic transmission. For a read the attribute indicates which link is active. A new link will always be configured wit… |
| 1.3.6.1.4.1.43.9.3.3.1.6 | ColumnecsResLinkState | read-write | mandatory | |
| 1.3.6.1.4.1.43.9.4 | NodeecsSecureRepeaterLineCards | |||
| 1.3.6.1.4.1.43.9.4.1 | ScalarecsSecureRLCMode | read-only | mandatory | Determines whether the management of Secure Repeater Line Cards is disabled or not. |
| 1.3.6.1.4.1.43.9.4.2 | ScalarecsSecureTrapRepRate | read-write | mandatory | Determines the rate at which secure traps are sent for a security violation. |
| 1.3.6.1.4.1.43.9.4.3 | TableecsSecureRLCTable | not-accessible | mandatory | A table which allows management of the secure Repeater Line Cards. |
| 1.3.6.1.4.1.43.9.4.3.1 | RowecsSecureRLCEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.9.4.3.1.1 | ColumnecsSecRLCSlotIndex | read-only | mandatory | The secure repeater line card slot index |
| 1.3.6.1.4.1.43.9.4.3.1.2 | ColumnecsSecRLCPortIndex | read-only | mandatory | The secure repeater line card port index |
| 1.3.6.1.4.1.43.9.4.3.1.3 | ColumnecsSecRLCLinkState | read-only | mandatory | Attribute to determine whether the security features are enabled on this port of the secure Repeater Line Card. |
| 1.3.6.1.4.1.43.9.4.3.1.4 | ColumnecsSecRLCPortState | read-write | mandatory | Attribute to determine whether the port can be normally enabled. |
| 1.3.6.1.4.1.43.9.4.3.1.5 | ColumnecsSecRLCNTKState | read-write | mandatory | Attribute to determine whether the Need to Know feature is enabled on the secure Repeater Line Card. |
| 1.3.6.1.4.1.43.9.4.3.1.6 | ColumnecsSecRLCBroadState | read-write | mandatory | Attribute to determine whether broadcasts are allowed or not allowed to be transmitted. |
| 1.3.6.1.4.1.43.9.4.3.1.7 | ColumnecsSecRLCMultiState | read-write | mandatory | Attribute to determine whether multicasts are allowed or not allowed to be transmitted. |
| 1.3.6.1.4.1.43.9.4.3.1.8 | ColumnecsSecRLCLearnMode | read-write | mandatory | Attribute to determine the learning mode of the secure repeater line card. |
| 1.3.6.1.4.1.43.9.4.3.1.9 | ColumnecsSecRLCReportMode | read-write | mandatory | Attribute to determine the reporting mode of the secure repeater line card. |
| 1.3.6.1.4.1.43.9.4.3.1.10 | ColumnecsSecRLCMACAddress | read-write | mandatory | The MAC address in use by the secure repeater line card. |
| 1.3.6.1.4.1.43.9.5 | NodeecsRepeaterLineCard | |||
| 1.3.6.1.4.1.43.9.5.1 | TableecsRLCPortStatisticsTable | not-accessible | mandatory | A table which summaries the statistics for each active port/slot |
| 1.3.6.1.4.1.43.9.5.1.1 | RowecsRLCPortStatisticsEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.9.5.1.1.1 | ColumnecsRepeaterSlotIndex | read-only | mandatory | The repeater slot index. |
| 1.3.6.1.4.1.43.9.5.1.1.2 | ColumnecsRepeaterPortIndex | read-only | mandatory | The repeater port index. |
| 1.3.6.1.4.1.43.9.5.1.1.3 | ColumnecsRepeaterPortState | read-write | mandatory | The repeater port state. |
| 1.3.6.1.4.1.43.9.5.1.1.4 | ColumnecsRepeaterPartitionState | read-only | mandatory | The repeater port partition state. |
| 1.3.6.1.4.1.43.9.5.1.1.5 | ColumnecsGoodRcvdFrames | read-only | mandatory | The number of good frames which have been received and repeted by the specified port. |
| 1.3.6.1.4.1.43.9.5.1.1.6 | ColumnecsTotalByteCount | read-only | mandatory | The summation of the total number of bytes which have been received in good frames and repeated by the specified port. |
| 1.3.6.1.4.1.43.9.5.1.1.7 | ColumnecsTotalErrorCount | read-only | mandatory | The summaration of all of the errors recorded in the PortErrors table for the specified port |
| 1.3.6.1.4.1.43.9.5.1.1.8 | ColumnecsRxBroadcastFrames | read-only | mandatory | The number of broadcast frames received on this port. |
| 1.3.6.1.4.1.43.9.5.1.1.9 | ColumnecsRxMulticastFrames | read-only | mandatory | The number of broadcast frames received on this port. |
| 1.3.6.1.4.1.43.9.5.2 | TableecsRLCPortErrorTable | not-accessible | mandatory | A table which summaries the error counts for each active port and slot |
| 1.3.6.1.4.1.43.9.5.2.1 | RowecsRLCPortErrorEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.9.5.2.1.1 | ColumnecsErrorSlotIndex | read-only | mandatory | The repeater slot index |
| 1.3.6.1.4.1.43.9.5.2.1.2 | ColumnecsErrorPortIndex | read-only | mandatory | The repeater port index. |
| 1.3.6.1.4.1.43.9.5.2.1.3 | ColumnecsCollisionsCount | read-only | mandatory | A count of every attempt to transmit a frame that involved a collision. |
| 1.3.6.1.4.1.43.9.5.2.1.4 | ColumnecsPartitions | read-only | mandatory | The count of the number of partitions which have been detected by the specified port. |
| 1.3.6.1.4.1.43.9.5.2.1.5 | ColumnecsCarrierSenseErrors | read-only | mandatory | The number of carrier sense errors which have been detected by the specified port. |
| 1.3.6.1.4.1.43.9.5.2.1.6 | ColumnecsAlignErrors | read-only | mandatory | The number of frames with alignment errors which have been received by the specified port. |
| 1.3.6.1.4.1.43.9.5.2.1.7 | ColumnecsCRCErrors | read-only | mandatory | The number of frames with CRC errors which have been received by the specified port. |
| 1.3.6.1.4.1.43.9.5.2.1.8 | ColumnecsJabberErrors | read-only | mandatory | The number of jabber errors which have been detected by the specified port. |
| 1.3.6.1.4.1.43.9.5.3 | TableecsRLCPortInfoTable | not-accessible | mandatory | A table which summaries the status information for each active port/slot |
| 1.3.6.1.4.1.43.9.5.3.1 | RowecsRLCPortInfoEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.9.5.3.1.1 | ColumnecsInfoSlotIndex | read-only | mandatory | The repeater slot index |
| 1.3.6.1.4.1.43.9.5.3.1.2 | ColumnecsInfoPortIndex | read-only | mandatory | The repeater port index |
| 1.3.6.1.4.1.43.9.5.3.1.3 | ColumnecsInfoPortName | read-write | mandatory | This is an informational string that could be used to show the name of a port. |
| 1.3.6.1.4.1.43.9.5.3.1.4 | ColumnecsRepeaterPartitionAlgor | read-write | mandatory | The current state of the repeater port algorithm. |
| 1.3.6.1.4.1.43.9.5.3.1.5 | ColumnecsJabberLockProtect | read-write | mandatory | The current state of the jabber protect switch. This affects all ports on the repeater ULA (not necessarily all ports on the card). |
| 1.3.6.1.4.1.43.9.5.3.1.6 | ColumnecsPortTest | read-write | mandatory | The Loopback test is performed on the specified port. This will interrupt traffic on all ports on the repeater ULA (not necessarily all ports on the card in a … |
| 1.3.6.1.4.1.43.9.5.3.1.7 | ColumnecsPortErrorState | read-write | mandatory | The error status of the specified port. Under normal conditions this takes the value 'normal' specifying that no error condition has been detected. |
| 1.3.6.1.4.1.43.9.5.3.1.8 | ColumnecsPortReset | read-write | mandatory | The specified port is reset. This will interrupt traffic on all ports on the repeater ULA (not necessarily all ports on the card in a specified slot) while the… |
| 1.3.6.1.4.1.43.9.5.3.1.9 | ColumnecsPortPartitionTraps | read-write | mandatory | Determines whether partition traps will be sent for this port. |
| 1.3.6.1.4.1.43.9.5.3.1.10 | ColumnecsPortLinkTraps | read-write | mandatory | Determines whether link traps will be sent for this port. |
| 1.3.6.1.4.1.43.9.5.3.1.11 | ColumnecsPortBootState | read-only | mandatory | Determines whether the port is disabled on boot (DOB), and therefore suitable for resilient link use. |
| 1.3.6.1.4.1.43.9.5.3.1.12 | ColumnecsPortSLMode | read-write | mandatory | Determines whether station locate is enabled for this port. |
| 1.3.6.1.4.1.43.9.5.4 | TableecsRLCcrcTable | not-accessible | mandatory | Level at which port rate error rate trap is produced. |
| 1.3.6.1.4.1.43.9.5.4.1 | RowecsRLCcrcEntry | not-accessible | mandatory | The number of frames with CRC errors which have been received by the specified port. |
| 1.3.6.1.4.1.43.9.5.4.1.1 | ColumnecsCRCSlotIndex | read-only | mandatory | The repeater slot index |
| 1.3.6.1.4.1.43.9.5.4.1.2 | ColumnecsCRCPortIndex | read-only | mandatory | The repeater port index |
| 1.3.6.1.4.1.43.9.5.4.1.3 | ColumnecsCRCErrorRate | read-only | mandatory | The gauge representing the CRC error rate. This is configured using the CRC error rate configuration. |
| 1.3.6.1.4.1.43.9.5.4.1.4 | ColumnecsCRCThreshold | read-write | mandatory | Level at which port rate error rate trap is produced. |
| 1.3.6.1.4.1.43.9.5.4.1.5 | ColumnecsCRCDecRateValue | read-write | mandatory | VALUE that, along with Rate Units, determines the Rate Interval, (in ns) between decrements of the CRC error guage, Rate Interval = ( Units * Value ). |
| 1.3.6.1.4.1.43.9.5.4.1.6 | ColumnecsCRCDecRateUnits | read-write | mandatory | UNITS that, along with Rate value, determine the Rate Interval Rate Interval = ( Units * Value ) |
| 1.3.6.1.4.1.43.9.5.4.1.7 | ColumnecsCRCHysteresisValue | read-write | mandatory | Specifies the value to which the CRC error guage must fall before another crossing of the threshold results in a trap. |
| 1.3.6.1.4.1.43.9.5.5 | TableecsRLCtrafficTable | not-accessible | mandatory | The configuration parameters which must be set up in order to use the traffic rate guage. |
| 1.3.6.1.4.1.43.9.5.5.1 | RowecsRLCtrafficEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.9.5.5.1.1 | ColumnecsTrafficSlotIndex | read-only | mandatory | The repeater slot index |
| 1.3.6.1.4.1.43.9.5.5.1.2 | ColumnecsTrafficPortIndex | read-only | mandatory | The repeater port index |
| 1.3.6.1.4.1.43.9.5.5.1.3 | ColumnecsTrafficRate | read-only | mandatory | The gauge representing the rate at which good frames have been received and repeated. This is configured using the traffic rate configuration. |
| 1.3.6.1.4.1.43.9.5.5.1.4 | ColumnecsTrafficThreshold | read-write | mandatory | Level at which port rate error rate trap is produced. |
| 1.3.6.1.4.1.43.9.5.5.1.5 | ColumnecsTrafficDecRateValue | read-write | mandatory | VALUE that, along with Rate Units, determines the Rate Interval, (in ns) between decrements of the CRC error guage, Rate Interval = ( Units * Value ). |
| 1.3.6.1.4.1.43.9.5.5.1.6 | ColumnecsTrafficDecRateUnits | read-write | mandatory | UNITS that, along with Rate value, determine the Rate Interval Rate Interval = ( Units * Value ) |
| 1.3.6.1.4.1.43.9.5.5.1.7 | ColumnecsTrafficHysteresisValue | read-write | mandatory | Specifies the value to which the CRC error guage must fall before another crossing of the threshold results in a trap. |
| 1.3.6.1.4.1.43.9.5.6 | TableecsRLCcollisionTable | not-accessible | mandatory | The configuration parameters which must be set up in order to use the collision rate guage. |
| 1.3.6.1.4.1.43.9.5.6.1 | RowecsRLCcollisionEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.9.5.6.1.1 | ColumnecsCollisionSlotIndex | read-only | mandatory | The repeater slot index |
| 1.3.6.1.4.1.43.9.5.6.1.2 | ColumnecsCollisionPortIndex | read-only | mandatory | The repeater port index |
| 1.3.6.1.4.1.43.9.5.6.1.3 | ColumnecsCollisionRate | read-only | mandatory | The gauge representing the rate at which collisions have been detected. This is configured using the collision rate configuration. |
| 1.3.6.1.4.1.43.9.5.6.1.4 | ColumnecsCollisionThreshold | read-write | mandatory | Level at which the collision rate guage will produce a High Collision rate trap. |
| 1.3.6.1.4.1.43.9.5.6.1.5 | ColumnecsCollisionDecRateValue | read-write | mandatory | VALUE that, along with Rate Units, determines the Rate Interval, (in ns) between decrements of the CRC error guage, Rate Interval = ( Units * Value ). |
| 1.3.6.1.4.1.43.9.5.6.1.6 | ColumnecsCollisionDecRateUnits | read-write | mandatory | UNITS that, along with Rate value, determine the Rate Interval Rate Interval = ( Units * Value ) |
| 1.3.6.1.4.1.43.9.5.6.1.7 | ColumnecsCollisionHysteresisValue | read-write | mandatory | Specifies the value to which the Collision guage must fall before another crossing of the threshold results in a trap. |
| 1.3.6.1.4.1.43.9.5.7 | TableecsRLCjabberTable | not-accessible | mandatory | The configuration parameters which must be set up in order to use the jabber rate guage. |
| 1.3.6.1.4.1.43.9.5.7.1 | RowecsRLCjabberEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.9.5.7.1.1 | ColumnecsJabberSlotIndex | read-only | mandatory | The repeater slot index |
| 1.3.6.1.4.1.43.9.5.7.1.2 | ColumnecsJabberPortIndex | read-only | mandatory | The repeater port index |
| 1.3.6.1.4.1.43.9.5.7.1.3 | ColumnecsJabberErrorRate | read-only | mandatory | The gauge representing the rate at which jabber errors have been detected. This is configured using the jabber rate configuration. |
| 1.3.6.1.4.1.43.9.5.7.1.4 | ColumnecsJabberThreshold | read-write | mandatory | Level at which port rate error rate trap is produced. |
| 1.3.6.1.4.1.43.9.5.7.1.5 | ColumnecsJabberDecRateValue | read-write | mandatory | VALUE that, along with Rate Units, determine the Rate Interval, Rate Interval = ( Units * Value ) |
| 1.3.6.1.4.1.43.9.5.7.1.6 | ColumnecsJabberDecRateUnits | read-write | mandatory | UNITS that, along with Rate value, determine the Rate Interval Rate Interval = ( Units * Value ) |
| 1.3.6.1.4.1.43.9.5.7.1.7 | ColumnecsJabberHysteresisValue | read-write | mandatory | Specifies the value to which the jabber error guage must fall before another crossing of the threshold results in a trap. |
| 1.3.6.1.4.1.43.9.5.8 | TableecsRLCalignTable | not-accessible | mandatory | The configuration parameters which must be set up in order to use the alignment error rate guage. |
| 1.3.6.1.4.1.43.9.5.8.1 | RowecsRLCalignEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.9.5.8.1.1 | ColumnecsAlignSlotIndex | read-only | mandatory | The repeater slot index |
| 1.3.6.1.4.1.43.9.5.8.1.2 | ColumnecsAlignPortIndex | read-only | mandatory | The repeater port index |
| 1.3.6.1.4.1.43.9.5.8.1.3 | ColumnecsAlignErrorRate | read-only | mandatory | The gauge representing the alignment error rate. This is configured using the alignment error rate configuration. |
| 1.3.6.1.4.1.43.9.5.8.1.4 | ColumnecsAlignThreshold | read-write | mandatory | Level at which port rate error rate trap is produced. |
| 1.3.6.1.4.1.43.9.5.8.1.5 | ColumnecsAlignDecRateValue | read-write | mandatory | VALUE that, along with Rate Units, determines the Rate Interval, (in ns) between decrements of the CRC error guage, Rate Interval = ( Units * Value ), where UN… |
| 1.3.6.1.4.1.43.9.5.8.1.6 | ColumnecsAlignDecRateUnits | read-write | mandatory | UNITS that, along with Rate value, determine the Rate Interval Rate Interval = ( Units * Value ) |
| 1.3.6.1.4.1.43.9.5.8.1.7 | ColumnecsAlignHysteresisValue | read-write | mandatory | Specifies the value to which the CRC error guage must fall before another crossing of the threshold results in a trap. |
| 1.3.6.1.4.1.43.9.5.9 | TableecsRLCcarrierTable | not-accessible | mandatory | The configuration parameters which must be set up in order to use the carrier sense error rate guage. |
| 1.3.6.1.4.1.43.9.5.9.1 | RowecsRLCcarrierEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.9.5.9.1.1 | ColumnecsCarrierSlotIndex | read-only | mandatory | The repeater slot index |
| 1.3.6.1.4.1.43.9.5.9.1.2 | ColumnecsCarrierPortIndex | read-only | mandatory | The repeater port index |
| 1.3.6.1.4.1.43.9.5.9.1.3 | ColumnecsCarrierSenseErrorRate | read-only | mandatory | The gauge representing the rate at which jabber errors have been detected. This is configured using the jabber rate configuration. |
| 1.3.6.1.4.1.43.9.5.9.1.4 | ColumnecsCarrierSenseThreshold | read-write | mandatory | Level at which port rate error rate trap is produced. |
| 1.3.6.1.4.1.43.9.5.9.1.5 | ColumnecsCarrierSenseRateValue | read-write | mandatory | VALUE that, along with Rate Units, determines the Rate Interval, (in ns) between decrements of the CRC error guage, Rate Interval = ( Units * Value ). |
| 1.3.6.1.4.1.43.9.5.9.1.6 | ColumnecsCarrierSenseRateUnits | read-write | mandatory | UNITS that, along with Rate value, determine the Rate Interval Rate Interval = ( Units * Value ) |
| 1.3.6.1.4.1.43.9.5.9.1.7 | ColumnecsCarrierSenseHysteresisValue | read-write | mandatory | Specifies the value to which the carrier sense error guage must fall before another crossing of the threshold results in a trap. |
| 1.3.6.1.4.1.43.9.5.10 | TableecsRLCSlotStatisticsTable | not-accessible | mandatory | A table which summaries the statistics for each active slot |
| 1.3.6.1.4.1.43.9.5.10.1 | RowecsRLCSlotStatisticsEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.9.5.10.1.1 | ColumnecsRLCSlotIndex | read-only | mandatory | The slot number of the Repeater Line Card. |
| 1.3.6.1.4.1.43.9.5.10.1.2 | ColumnecsRLCGoodRcvdFrames | read-only | mandatory | The number of readable frames received by this slot. |
| 1.3.6.1.4.1.43.9.5.10.1.3 | ColumnecsRLCTotalByteCount | read-only | mandatory | The number of readable octets received by this Repeater Line Card. |
| 1.3.6.1.4.1.43.9.5.10.1.4 | ColumnecsRLCTotalErrorCount | read-only | mandatory | The total number of errors received on this slot. |
| 1.3.6.1.4.1.43.9.5.10.1.5 | ColumnecsRLCTotalBroadcasts | read-only | mandatory | The total number of broadcast frames received on this slot. |
| 1.3.6.1.4.1.43.9.5.10.1.6 | ColumnecsRLCTotalMulticasts | read-only | mandatory | The total number of multicast frames received on this slot. |
| 1.3.6.1.4.1.43.9.5.11 | TableecsRLCSlotErrorTable | not-accessible | mandatory | A table which summaries the error statistics for each active slot |
| 1.3.6.1.4.1.43.9.5.11.1 | RowecsRLCSlotErrorEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.9.5.11.1.1 | ColumnecsRLCErrorSlotIndex | read-only | mandatory | The slot number of the Repeater Line Card for which these error statistics pertain. |
| 1.3.6.1.4.1.43.9.5.11.1.2 | ColumnecsRLCCollisionsCount | read-only | mandatory | The total number of Collisions Reported for this slot. |
| 1.3.6.1.4.1.43.9.5.11.1.3 | ColumnecsRLCPartitions | read-only | mandatory | The total number of Partitions Reported for this slot. |
| 1.3.6.1.4.1.43.9.5.11.1.4 | ColumnecsRLCCarrierSenseErrors | read-only | mandatory | The total number of Carrier Sense erros reported for this slot. |
| 1.3.6.1.4.1.43.9.5.11.1.5 | ColumnecsRLCAlignErrors | read-only | mandatory | The total number of Alignement errors Reported for this slot. |
| 1.3.6.1.4.1.43.9.5.11.1.6 | ColumnecsRLCCRCErrors | read-only | mandatory | The total number of CRC errors reported for this slot. |
| 1.3.6.1.4.1.43.9.5.11.1.7 | ColumnecsRLCJabberErrors | read-only | mandatory | The total number of jabber errors reported for this slot. |
| 1.3.6.1.4.1.43.9.6 | NodeecsRLCStationLocate | |||
| 1.3.6.1.4.1.43.9.6.1 | ScalarecsRLCSizeOfStationLocateDB | read-only | mandatory | |
| 1.3.6.1.4.1.43.9.6.2 | ScalarecsRLCNumbOfSLEntries | read-only | mandatory | |
| 1.3.6.1.4.1.43.9.6.3 | ScalarecsRLCSLDataBaseStatus | read-write | mandatory | |
| 1.3.6.1.4.1.43.9.6.4 | ScalarecsRLCSLowFilterAddress | read-write | mandatory | |
| 1.3.6.1.4.1.43.9.6.5 | ScalarecsRLCSLhighFilterAddress | read-write | mandatory | |
| 1.3.6.1.4.1.43.9.6.6 | TableecsRLCStationLocateTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.9.6.6.1 | RowecsRLCStationLocateEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.9.6.6.1.1 | ColumnecsRLCSLAddress | read-only | mandatory | The MAC Address for which one wishes to locate the slot and port. |
| 1.3.6.1.4.1.43.9.6.6.1.2 | ColumnecsRLCSLSlotIndex | read-only | mandatory | The slot number for this MAC address declared in ecsRLCStationAddress. |
| 1.3.6.1.4.1.43.9.6.6.1.3 | ColumnecsRLCSLPortIndex | read-only | mandatory | The port number for this MAC address declared in ecsRLCStationAddress. |
| 1.3.6.1.4.1.43.9.6.6.1.4 | ColumnecsRLCSLStatus | read-write | mandatory | Writing clear(1) will clear the entry in the LinkBuilder ECS DataBase. |
| 1.3.6.1.4.1.43.9.6.7 | TableecsRLCNewStationLocateTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.9.6.7.1 | RowecsRLCNewStationLocateEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.9.6.7.1.1 | ColumnecsRLCNewSLAddress | read-only | mandatory | The MAC Address for which one wishes to locate the slot and port. |
| 1.3.6.1.4.1.43.9.6.7.1.2 | ColumnecsRLCNewSLSlotIndex | read-only | mandatory | The slot number for this MAC address declared in ecsRLCNewSLAddress. |
| 1.3.6.1.4.1.43.9.6.7.1.3 | ColumnecsRLCNewSLPortIndex | read-only | mandatory | The port number for this MAC address declared in ecsRLCNewSLAddress. |
| 1.3.6.1.4.1.43.9.8 | NodeecsHubStatistics | |||
| 1.3.6.1.4.1.43.9.8.1 | ScalarecsHubTotalGoodRcvdFrames | read-only | mandatory | The number of readable frames received by this slot. |
| 1.3.6.1.4.1.43.9.8.2 | ScalarecsHubTotalByteCount | read-only | mandatory | The number of readable octets received by this hub. |
| 1.3.6.1.4.1.43.9.8.3 | ScalarecsHubTotalErrorCount | read-only | mandatory | The total number of errored packets detected on the hub. |
| 1.3.6.1.4.1.43.9.8.4 | ScalarecsHubTotalBroadcasts | read-only | mandatory | The total number of brodcast packets detected on the hub. |
| 1.3.6.1.4.1.43.9.8.5 | ScalarecsHubTotalMultiFrames | read-only | mandatory | The total number of multicast packets detected on the hub. |
| 1.3.6.1.4.1.43.9.8.6 | ScalarecsHubTotalCollisionsCount | read-only | mandatory | The total number of Collisions Reported for the hub. |
| 1.3.6.1.4.1.43.9.8.7 | ScalarecsHubTotalPartitions | read-only | mandatory | The total number of Partitions Reported for this hub. |
| 1.3.6.1.4.1.43.9.8.8 | ScalarecsHubTotalCarrierSenseErrors | read-only | mandatory | The total number of Carrier Sense erros reported for this hub. |
| 1.3.6.1.4.1.43.9.8.9 | ScalarecsHubTotalAlignErrors | read-only | mandatory | The total number of Alignement errors reported for this hub. |
| 1.3.6.1.4.1.43.9.8.10 | ScalarecsHubTotalCRCErrors | read-only | mandatory | The total number of CRC errors reported for this hub. |
| 1.3.6.1.4.1.43.9.8.11 | ScalarecsHubTotalJabberErrors | read-only | mandatory | The total number of jabber errors reported for this hub. |
| 1.3.6.1.4.1.43.9.9 | NodeecsVideo | |||
| 1.3.6.1.4.1.43.9.255 | NodelbecsXENDOFMIB | |||
| 1.3.6.1.4.1.43.9.255.1 | TablexecsDummyTable | not-accessible | mandatory | A dummy table which allows management of all tables (an snm bug). |
| 1.3.6.1.4.1.43.9.255.1.1 | RowecsDummyEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.9.255.1.1.1 | ColumnecsDummyIndex | read-only | mandatory | |
| 1.3.6.1.4.1.43.9.255.1.1.2 | ColumnecsDummyValue | read-write | mandatory | |
| 1.3.6.1.4.1.43.10 | Nodegeneric | |||
| 1.3.6.1.4.1.43.10.1 | NodegenExperimental | |||
| 1.3.6.1.4.1.43.10.1.1 | NodetestData | |||
| 1.3.6.1.4.1.43.10.1.2 | NodeifExtensions | |||
| 1.3.6.1.4.1.43.10.2 | Nodesetup | |||
| 1.3.6.1.4.1.43.10.3 | NodesysLoader | |||
| 1.3.6.1.4.1.43.10.4 | Nodesecurity | |||
| 1.3.6.1.4.1.43.10.5 | Nodegauges | |||
| 1.3.6.1.4.1.43.10.6 | NodeasciiAgent | |||
| 1.3.6.1.4.1.43.10.7 | NodeserialIf | |||
| 1.3.6.1.4.1.43.10.8 | NoderepeaterMgmt | |||
| 1.3.6.1.4.1.43.10.9 | NodeendStation | |||
| 1.3.6.1.4.1.43.10.10 | NodelocalSnmp | |||
| 1.3.6.1.4.1.43.10.11 | Nodemanager | |||
| 1.3.6.1.4.1.43.10.12 | NodeunusedGeneric12 | |||
| 1.3.6.1.4.1.43.10.14 | Nodechassis | |||
| 1.3.6.1.4.1.43.10.15 | NodemrmResilience | |||
| 1.3.6.1.4.1.43.10.16 | NodetokenRing | |||
| 1.3.6.1.4.1.43.10.17 | NodemultiRepeater | |||
| 1.3.6.1.4.1.43.10.18 | NodebridgeMgmt | |||
| 1.3.6.1.4.1.43.10.19 | Nodefault | |||
| 1.3.6.1.4.1.43.10.20 | Nodepoll | |||
| 1.3.6.1.4.1.43.10.21 | NodepowerSupply | |||
| 1.3.6.1.4.1.43.11 | NodenetBuilder-mib | |||
| 1.3.6.1.4.1.43.12 | NodelBridgeECS-mib | |||
| 1.3.6.1.4.1.43.13 | NodedeskMan-mib | |||
| 1.3.6.1.4.1.43.14 | NodelinkBuilderMSH-mib |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| PhysAddress | OCTET STRING |