LBHUB-MSH4PTBRDG-MIB
329 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises experimental Gauge internet IpAddress mgmt NetworkAddress TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1 | Nodemib-2 | |||
| 1.3.6.1.2.1.1 | Nodesystem | |||
| 1.3.6.1.2.1.2 | Nodeinterfaces | |||
| 1.3.6.1.2.1.4 | Nodeip | |||
| 1.3.6.1.2.1.5 | Nodeicmp | |||
| 1.3.6.1.2.1.6 | Nodetcp | |||
| 1.3.6.1.2.1.7 | Nodeudp | |||
| 1.3.6.1.2.1.8 | Nodeegp | |||
| 1.3.6.1.2.1.10 | Nodetransmission | |||
| 1.3.6.1.2.1.10.7 | Nodedot3 | |||
| 1.3.6.1.2.1.10.7.1 | Tabledot3Table | not-accessible | mandatory | Status information and control variables for a collection of ethernet-like interfaces attached to a particular system. |
| 1.3.6.1.2.1.10.7.1.1 | Rowdot3Entry | not-accessible | mandatory | Status information and control variables for a particular interface to an ethernet-like medium. |
| 1.3.6.1.2.1.10.7.1.1.1 | Columndot3Index | read-only | mandatory | An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same inter… |
| 1.3.6.1.2.1.10.7.1.1.2 | Columndot3InitializeMac | read-write | mandatory | The initialization status of the MAC and PLS (Physical Layer Signalling) subsystems for a particular interface. The value initialized(1) signifies that the sub… |
| 1.3.6.1.2.1.10.7.1.1.3 | Columndot3MacSubLayerStatus | read-write | mandatory | The operational status of the MAC sublayer for a particular interface. The value enabled(1) signifies that the MAC sublayer for said interface is operational f… |
| 1.3.6.1.2.1.10.7.1.1.4 | Columndot3MulticastReceiveStatus | read-write | mandatory | The multicast receive status for a particular interface. The value enabled(1) signifies that reception of multicast frames by the MAC sublayer is enabled on sa… |
| 1.3.6.1.2.1.10.7.1.1.5 | Columndot3TxEnabled | read-write | mandatory | The transmit layer management state variable (transmitEnabled as defined in [9]) for a particular interface. The value true(1) signifies that the MAC frame tra… |
| 1.3.6.1.2.1.10.7.1.1.6 | Columndot3TestTdrValue | read-only | mandatory | The number of 10 MHz ticks which elapsed between the beginning of a TDR measurement and the collision which ended it, for the most recently executed TDR test. … |
| 1.3.6.1.2.1.10.7.2 | Tabledot3StatsTable | not-accessible | mandatory | Statistics for a collection of ethernet-like interfaces attached to a particular system. |
| 1.3.6.1.2.1.10.7.2.1 | Rowdot3StatsEntry | not-accessible | mandatory | Statistics for a particular interface to an ethernet-like medium. |
| 1.3.6.1.2.1.10.7.2.1.1 | Columndot3StatsIndex | read-only | mandatory | An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same inter… |
| 1.3.6.1.2.1.10.7.2.1.2 | Columndot3StatsAlignmentErrors | read-only | mandatory | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented b… |
| 1.3.6.1.2.1.10.7.2.1.3 | Columndot3StatsFCSErrors | read-only | mandatory | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an… |
| 1.3.6.1.2.1.10.7.2.1.4 | Columndot3StatsSingleCollisionFrames | read-only | mandatory | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by a… |
| 1.3.6.1.2.1.10.7.2.1.5 | Columndot3StatsMultipleCollisionFrames | read-only | mandatory | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by… |
| 1.3.6.1.2.1.10.7.2.1.6 | Columndot3StatsSQETestErrors | read-only | mandatory | A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section … |
| 1.3.6.1.2.1.10.7.2.1.7 | Columndot3StatsDeferredTransmissions | read-only | mandatory | A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instanc… |
| 1.3.6.1.2.1.10.7.2.1.8 | Columndot3StatsLateCollisions | read-only | mandatory | The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve … |
| 1.3.6.1.2.1.10.7.2.1.9 | Columndot3StatsExcessiveCollisions | read-only | mandatory | A count of frames for which transmission on a particular interface fails due to excessive collisions. |
| 1.3.6.1.2.1.10.7.2.1.10 | Columndot3StatsInternalMacTransmitErrors | read-only | mandatory | A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance… |
| 1.3.6.1.2.1.10.7.2.1.11 | Columndot3StatsCarrierSenseErrors | read-only | mandatory | The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count repres… |
| 1.3.6.1.2.1.10.7.2.1.12 | Columndot3StatsExcessiveDeferrals | read-only | mandatory | A count of frames for which transmission on a particular interface is deferred for an excessive period of time. |
| 1.3.6.1.2.1.10.7.2.1.13 | Columndot3StatsFrameTooLongs | read-only | mandatory | A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incre… |
| 1.3.6.1.2.1.10.7.2.1.14 | Columndot3StatsInRangeLengthErrors | read-only | mandatory | A count of frames received on a particular interface with a length field value that falls between the minimum unpadded LLC data size and the maximum allowed LL… |
| 1.3.6.1.2.1.10.7.2.1.15 | Columndot3StatsOutOfRangeLengthFields | read-only | mandatory | A count of frames received on a particular interface for which the length field value exceeds the maximum allowed LLC data size. The count represented by an in… |
| 1.3.6.1.2.1.10.7.2.1.16 | Columndot3StatsInternalMacReceiveErrors | read-only | mandatory | A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of … |
| 1.3.6.1.2.1.10.7.8 | Nodedot3ChipSets | |||
| 1.3.6.1.2.1.10.7.8.1 | Nodedot3ChipSetAMD | |||
| 1.3.6.1.2.1.10.7.8.1.1 | Nodedot3ChipSetAMD7990 | |||
| 1.3.6.1.2.1.10.7.8.1.2 | Nodedot3ChipSetAMD79900 | |||
| 1.3.6.1.2.1.11 | Nodesnmp | |||
| 1.3.6.1.2.1.12 | NodeifExtensions | |||
| 1.3.6.1.2.1.12.1 | TableifExtnsTable | not-accessible | mandatory | A list of interfaces extension entries. The number of entries is given by the value of ifNumber, defined in [4,6]. |
| 1.3.6.1.2.1.12.1.1 | RowifExtnsEntry | not-accessible | mandatory | An extension to the interfaces entry, defined in [4,6], containing additional objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.2.1.12.1.1.1 | ColumnifExtnsIfIndex | read-only | mandatory | The value of this object identifies the interface for which this entry contains extended management information. The value of this object for a particular inte… |
| 1.3.6.1.2.1.12.1.1.2 | ColumnifExtnsChipSet | read-only | mandatory | This object identifies the hardware chip set being used in the interface. The assignment of OBJECT IDENTIFIERs to various types of hardware chip sets is define… |
| 1.3.6.1.2.1.12.1.1.3 | ColumnifExtnsRevWare | read-only | mandatory | An arbitrary octet string that describes the firmware version of this interface. It is intended that this should be human readable. It must only contain ASCII … |
| 1.3.6.1.2.1.12.1.1.4 | ColumnifExtnsMulticastsTransmittedOks | read-only | mandatory | The count of frames successfully transmitted to a subnetwork or link-layer multicast destination address other than a broadcast address. For a MAC layer protoc… |
| 1.3.6.1.2.1.12.1.1.5 | ColumnifExtnsBroadcastsTransmittedOks | read-only | mandatory | The count of frames successfully transmitted to a subnetwork or link-layer broadcast addresses. It does not include frames sent to a multicast address. |
| 1.3.6.1.2.1.12.1.1.6 | ColumnifExtnsMulticastsReceivedOks | read-only | mandatory | The count of frames successfully received that are directed to an active subnetwork or link-layer multicast address (for a MAC layer protocol, this includes bo… |
| 1.3.6.1.2.1.12.1.1.7 | ColumnifExtnsBroadcastsReceivedOks | read-only | mandatory | The count of frames successfully received that are directed to a subnetwork or link-layer broadcast address. |
| 1.3.6.1.2.1.12.1.1.8 | ColumnifExtnsPromiscuous | read-only | mandatory | This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when t… |
| 1.3.6.1.2.1.12.3 | TableifExtnsRcvAddrTable | not-accessible | mandatory | This table contains an entry for each address (broadcast, multicast, or uni-cast) for which the system will receive packets/ frames on a particular interface. … |
| 1.3.6.1.2.1.12.3.1 | RowifExtnsRcvAddrEntry | not-accessible | mandatory | A list of objects identifying an address for which the system will accept packets/ frames on a particular interface. |
| 1.3.6.1.2.1.12.3.1.1 | ColumnifExtnsRcvAddrIfIndex | read-only | mandatory | The value of ifIndex, defined in [4,6], of an interface which recognizes this entry's address. |
| 1.3.6.1.2.1.12.3.1.2 | ColumnifExtnsRcvAddress | read-only | mandatory | An address for which the system will accept packets/frames on this entry's interface. |
| 1.3.6.1.2.1.12.3.1.3 | ColumnifExtnsRcvAddrStatus | read-write | mandatory | This object has the value nonVolatile(4) for those entries in the table which are valid and will not be deleted by the next restart of the managed system. Entr… |
| 1.3.6.1.2.1.17 | Nodedot1dBridge | |||
| 1.3.6.1.2.1.17.1 | NodenewRoot | The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new… | ||
| 1.3.6.1.2.1.17.2 | NodetopologyChange | A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding … | ||
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.187 | Nodeconstellation | |||
| 1.3.6.1.4.1.187.1 | NodecExper | |||
| 1.3.6.1.4.1.187.2 | NodecProducts | |||
| 1.3.6.1.4.1.187.2.1 | NodecLittleDipper | |||
| 1.3.6.1.4.1.187.2.3 | NodecAuriga | |||
| 1.3.6.1.4.1.187.2.4 | NodecCarina | |||
| 1.3.6.1.4.1.187.2.4.1 | NodecCarinaAui | |||
| 1.3.6.1.4.1.187.2.4.2 | NodecCarinaBnc | |||
| 1.3.6.1.4.1.187.2.5 | NodecDuPont | |||
| 1.3.6.1.4.1.187.2.5.1 | NodecDuPontAui | |||
| 1.3.6.1.4.1.187.2.6 | NodecDatabil | |||
| 1.3.6.1.4.1.187.2.6.1 | NodecDatability | |||
| 1.3.6.1.4.1.187.2.7 | NodecPenr | |||
| 1.3.6.1.4.1.187.2.7.1 | NodecPenril | |||
| 1.3.6.1.4.1.187.2.8 | NodecThreeCom | |||
| 1.3.6.1.4.1.187.2.8.1 | NodecThreeComMSH | |||
| 1.3.6.1.4.1.187.3 | NodecStdExtensions | |||
| 1.3.6.1.4.1.187.3.1 | NodecSystem | |||
| 1.3.6.1.4.1.187.3.2 | NodecInterfaces | |||
| 1.3.6.1.4.1.187.3.4 | NodecIp | |||
| 1.3.6.1.4.1.187.3.4.1 | ScalarcIpInLenErrors | read-only | mandatory | Number of packets received with an inconsistant Header/Packet length |
| 1.3.6.1.4.1.187.3.4.2 | ScalarcIpInVersionErrors | read-only | mandatory | Number of packets received with an incorrect IP version number. |
| 1.3.6.1.4.1.187.3.4.3 | ScalarcIpInCSErrors | read-only | mandatory | Number of packets received with an incorrect IP checksum. |
| 1.3.6.1.4.1.187.3.4.4 | ScalarcIpTTLZero | read-only | mandatory | Number of packets that would have been forwarded but their TTL went to 0. |
| 1.3.6.1.4.1.187.3.4.5 | ScalarcIpReasmTimeOuts | read-only | mandatory | Number of reassmebly timeouts. This is included inthe ipReasmFails object. |
| 1.3.6.1.4.1.187.3.4.7 | NodecIpNetToMedia | |||
| 1.3.6.1.4.1.187.3.4.7.1 | ScalarcIpNetToMediaTableSize | read-only | mandatory | The maximum number of entries that can be in the cIpNetToMediaTable/ipNetToMediaTable. |
| 1.3.6.1.4.1.187.3.4.7.2 | ScalarcIpNetToMediaCompleteTimeOut | read-write | mandatory | The maximum age, in minutes, that a completed entry may remain in the table before it is timed out and discarded. |
| 1.3.6.1.4.1.187.3.4.7.3 | ScalarcIpNetToMediaInCompleteTimeOut | read-write | mandatory | The maximum age, in minutes, that an incomplete entry may remain in the table before it is timed out and discarded. |
| 1.3.6.1.4.1.187.3.4.7.4 | ScalarcIpNetToMediaIns | read-only | mandatory | Total number of arp packets received. |
| 1.3.6.1.4.1.187.3.4.7.5 | ScalarcIpNetToMediaInLenErrs | read-only | mandatory | Total number of arp packets received which had inconsistant or incorrect lengths. These packets are ignored. |
| 1.3.6.1.4.1.187.3.4.7.6 | ScalarcIpNetToMediaInNotEther | read-only | mandatory | Total number of arp packets received which specified a hardware type other than Ethernet. These packets are ignored. |
| 1.3.6.1.4.1.187.3.4.7.7 | ScalarcIpNetToMediaInNoArpOnIf | read-only | mandatory | Number of ARP packets received in an interface for which ARP is disabled. |
| 1.3.6.1.4.1.187.3.4.7.8 | ScalarcIpNetToMediaInIp | read-only | mandatory | Number of ARP packets received specifying IP. |
| 1.3.6.1.4.1.187.3.4.7.9 | ScalarcIpNetToMediaInIpTrailers | read-only | mandatory | Number of ARP packets received specifying IP Trailers. |
| 1.3.6.1.4.1.187.3.4.7.10 | ScalarcIpNetToMediaInUnkProtos | read-only | mandatory | Number of ARP packets received specifying an unknown protocol. |
| 1.3.6.1.4.1.187.3.4.7.11 | ScalarcIpNetToMediaInSourceBcast | read-only | mandatory | Number of ARP packets received with a broadcast or multicast source hardware address. |
| 1.3.6.1.4.1.187.3.4.7.12 | ScalarcIpNetToMediaInDups | read-only | mandatory | Number of ARP packets received that originated from another node but had the IP address of this node in the packet's source protocol address field. |
| 1.3.6.1.4.1.187.3.4.7.13 | ScalarcIpNetToMediaInRequests | read-only | mandatory | Number of ARP Requests received. |
| 1.3.6.1.4.1.187.3.4.7.14 | ScalarcIpNetToMediaInResponses | read-only | mandatory | Number of ARP Responses received. |
| 1.3.6.1.4.1.187.3.4.7.15 | ScalarcIpNetToMediaInProxyOks | read-only | mandatory | Number of proxy ARP requests that we received and have answered. |
| 1.3.6.1.4.1.187.3.4.7.16 | ScalarcIpNetToMediaOutReplys | read-only | mandatory | Number of ARP replys sent. |
| 1.3.6.1.4.1.187.3.4.7.17 | ScalarcIpNetToMediaOutRequests | read-only | mandatory | Number of ARP requests sent. |
| 1.3.6.1.4.1.187.3.4.7.18 | ScalarcIpNetToMediaReqBadAddrs | read-only | mandatory | Number of times that a request was for an incorrect IP address (such as the broadcast). |
| 1.3.6.1.4.1.187.3.4.7.19 | ScalarcIpNetToMediaNoResponses | read-only | mandatory | Number of times that a request timed out. |
| 1.3.6.1.4.1.187.3.4.7.20 | ScalarcIpNetToMediaAgeOuts | read-only | mandatory | Number of times that an entry was aged out of the arp cache because it had not been referenced recently. |
| 1.3.6.1.4.1.187.3.4.7.21 | TablecIpNetToMediaTable | not-accessible | mandatory | Table containing Constellation extensions to the IP Address Translation (IpNetToMedia) table defined above. |
| 1.3.6.1.4.1.187.3.4.7.21.1 | RowcIpNetToMediaEntry | not-accessible | mandatory | Each entry contains Constellation extensions for one IpAddress to `physical' address equivalence. |
| 1.3.6.1.4.1.187.3.4.7.21.1.1 | ColumncIpNetToMediaIfIndex | read-write | mandatory | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.4.1.187.3.4.7.21.1.2 | ColumncIpNetToMediaNetAddress | read-write | mandatory | The IpAddress corresponding to the media- dependent `physical' address. |
| 1.3.6.1.4.1.187.3.4.7.21.1.3 | ColumncIpNetToMediaRefTime | read-only | mandatory | The value of sysUpTime when this entry was last referenced. |
| 1.3.6.1.4.1.187.3.4.7.21.1.4 | ColumncIpNetToMediaProxyRespond | read-only | mandatory | Is true(1) if this node willrespond to this IP Address following the rules of proxy arp. Otherwise this object is false(2). Setting this object to false(2) wil… |
| 1.3.6.1.4.1.187.3.4.7.21.1.5 | ColumncIpNetToMediaComplete | read-only | mandatory | Is true(1) if the table entry is complete the ipNetToMediaPhysAddress contains a valid value. If this object is false then the physical address may not be corr… |
| 1.3.6.1.4.1.187.3.4.7.21.1.6 | ColumncIpNetToMediaUseTrailers | read-only | mandatory | Is true(1) if this entry will use ARP trailers. Otherwise this object is false(2). |
| 1.3.6.1.4.1.187.3.5 | NodecIcmp | |||
| 1.3.6.1.4.1.187.3.5.1 | ScalarcIcmpInRedirectNet | read-only | mandatory | Number of ICMP Destination Unreachable, Network Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.2 | ScalarcIcmpInRedirectHost | read-only | mandatory | Number of ICMP Destination Unreachable, Host Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.3 | ScalarcIcmpInRedirectNetTos | read-only | mandatory | Number of ICMP Destination Unreachable, Network/TOS Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.4 | ScalarcIcmpInRedirectHostTos | read-only | mandatory | Number of ICMP Destination Unreachable, Host/TOS Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.5 | ScalarcIcmpInTimeExcTTL | read-only | mandatory | Number of ICMP Time Exceeded, TTL Exceeded in Transit messages received. |
| 1.3.6.1.4.1.187.3.5.6 | ScalarcIcmpInTimeExcReAsm | read-only | mandatory | Number of ICMP Time Exceeded, Reassembly Time Exceeded messages received. |
| 1.3.6.1.4.1.187.3.5.7 | ScalarcIcmpInDestUnNet | read-only | mandatory | Number of ICMP Network Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.8 | ScalarcIcmpInDestUnHost | read-only | mandatory | Number of ICMP Host Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.9 | ScalarcIcmpInDestUnProtocol | read-only | mandatory | Number of ICMP Protocol Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.10 | ScalarcIcmpInDestUnPort | read-only | mandatory | Number of ICMP Port Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.11 | ScalarcIcmpInDestUnFragNeeded | read-only | mandatory | Number of ICMP Fragmentation Needed and DF Set Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.12 | ScalarcIcmpInDestUnSourceRoute | read-only | mandatory | Number of ICMP Source Route Failed Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.13 | ScalarcIcmpOutRedirectNet | read-only | mandatory | Number of ICMP Destination Unreachable, Network Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.14 | ScalarcIcmpOutRedirectHost | read-only | mandatory | Number of ICMP Destination Unreachable, Host Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.15 | ScalarcIcmpOutRedirectNetTos | read-only | mandatory | Number of ICMP Destination Unreachable, Network/TOS Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.16 | ScalarcIcmpOutRedirectHostTos | read-only | mandatory | Number of ICMP Destination Unreachable, Host/TOS Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.17 | ScalarcIcmpOutTimeExcTTL | read-only | mandatory | Number of ICMP Time Exceeded, TTL Exceeded in Transit messages sent. |
| 1.3.6.1.4.1.187.3.5.18 | ScalarcIcmpOutTimeExcReAsm | read-only | mandatory | Number of ICMP Time Exceeded, Reassembly Time Exceeded messages sent. |
| 1.3.6.1.4.1.187.3.5.19 | ScalarcIcmpOutDestUnNet | read-only | mandatory | Number of ICMP Network Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.20 | ScalarcIcmpOutDestUnHost | read-only | mandatory | Number of ICMP Host Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.21 | ScalarcIcmpOutDestUnProtocol | read-only | mandatory | Number of ICMP Protocol Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.22 | ScalarcIcmpOutDestUnPort | read-only | mandatory | Number of ICMP Port Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.23 | ScalarcIcmpOutDestUnFragNeeded | read-only | mandatory | Number of ICMP Fragmentation Needed and DF Set Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.24 | ScalarcIcmpOutDestUnSourceRoute | read-only | mandatory | Number of ICMP Source Route Failed Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.25 | ScalarcIcmpInLengthErrors | read-only | mandatory | Number of alleged ICMP packets that were not long enough. |
| 1.3.6.1.4.1.187.3.5.26 | ScalarcIcmpInChecksumErrors | read-only | mandatory | Number of alleged ICMP packets that had a bad checksum. |
| 1.3.6.1.4.1.187.3.5.27 | ScalarcIcmpInUnkTypes | read-only | mandatory | Number of Received ICMP packets with an unknown type field value. |
| 1.3.6.1.4.1.187.3.5.28 | ScalarcIcmpInDestUnNetUnknown | read-only | mandatory | Number of ICMP Destination Network Unknown Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.29 | ScalarcIcmpInDestUnHostUnknown | read-only | mandatory | Number of ICMP Destination Host Unknown Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.30 | ScalarcIcmpInDestUnSrcIsolated | read-only | mandatory | Number of ICMP Source Isolated Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.31 | ScalarcIcmpInDestUnHostProhib | read-only | mandatory | Number of ICMP Communication with Host Administratively Prohibited Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.32 | ScalarcIcmpInDestUnNetProhib | read-only | mandatory | Number of ICMP Communication with Net Administratively Prohibited Destination Unreachable messages received. |
| 1.3.6.1.4.1.187.3.5.33 | ScalarcIcmpInDestUnNetTos | read-only | mandatory | Number of ICMP Network Unreachable with TOS messages received. |
| 1.3.6.1.4.1.187.3.5.34 | ScalarcIcmpInDestUnHostTos | read-only | mandatory | Number of ICMP Host Unreachable with TOS messages received. |
| 1.3.6.1.4.1.187.3.5.35 | ScalarcIcmpOutDestUnNetUnknown | read-only | mandatory | Number of ICMP Destination Network Unknown Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.36 | ScalarcIcmpOutDestUnHostUnknown | read-only | mandatory | Number of ICMP Destination Host Unknown Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.37 | ScalarcIcmpOutDestUnSrcIsolated | read-only | mandatory | Number of ICMP Source Isolated Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.38 | ScalarcIcmpOutDestUnHostProhib | read-only | mandatory | Number of ICMP Communication with Host Administratively Prohibited Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.39 | ScalarcIcmpOutDestUnNetProhib | read-only | mandatory | Number of ICMP Communication with Net Administratively Prohibited Destination Unreachable messages sent. |
| 1.3.6.1.4.1.187.3.5.40 | ScalarcIcmpOutDestUnNetTos | read-only | mandatory | Number of ICMP Network Unreachable with TOS messages sent. |
| 1.3.6.1.4.1.187.3.5.41 | ScalarcIcmpOutDestUnHostTos | read-only | mandatory | Number of ICMP Host Unreachable with TOS messages sent. |
| 1.3.6.1.4.1.187.3.5.42 | ScalarcIcmpInParmProbMissingOpt | read-only | mandatory | Number of received Parameter Problem messages with the Missing Option code. |
| 1.3.6.1.4.1.187.3.5.43 | ScalarcIcmpOutParmProbMissingOpt | read-only | mandatory | Number of sent Parameter Problem messages with the Missing Option code. |
| 1.3.6.1.4.1.187.3.6 | NodecTcp | |||
| 1.3.6.1.4.1.187.3.7 | NodecUdp | |||
| 1.3.6.1.4.1.187.3.7.1 | ScalarcUdpHdrDrops | read-only | mandatory | Nr of packets dropped because of internal consistancy problems. This counter is a component of the udpInErrors Count. |
| 1.3.6.1.4.1.187.3.7.2 | ScalarcUdpBadCheckSum | read-only | mandatory | Nr of packets dropped because of an incorrect checksum. This counter is a component of the udpInErrors Count. |
| 1.3.6.1.4.1.187.3.7.3 | ScalarcUdpBadLength | read-only | mandatory | Nr of packets dropped because of an incorrect length. This counter is a component of the udpInErrors Count. |
| 1.3.6.1.4.1.187.3.7.4 | ScalarcUdpOtherErrors | read-only | mandatory | Nr of packets dropped because of some error other than one of the above. This counter is a component of the udpInErrors Count. The most likely cause of these e… |
| 1.3.6.1.4.1.187.3.7.5 | ScalarcUdpNoChecksum | read-only | mandatory | Nr of packets received with a checksum of 0. This is not an error condition but indicates that there are mentally retarded hosts on the network. |
| 1.3.6.1.4.1.187.3.10 | NodecTransmission | |||
| 1.3.6.1.4.1.187.3.10.7 | NodecDot3 | |||
| 1.3.6.1.4.1.187.3.10.7.1 | TablecDot3Table | not-accessible | mandatory | Extended status information for the Constellation specific LANCE and ILACC drivers. |
| 1.3.6.1.4.1.187.3.10.7.1.1 | RowcDot3Entry | not-accessible | mandatory | Proprietary status information for a particular interface |
| 1.3.6.1.4.1.187.3.10.7.1.1.1 | ColumncDot3Index | read-only | mandatory | An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same inter… |
| 1.3.6.1.4.1.187.3.10.7.1.1.2 | ColumncDot3Disables | read-only | mandatory | Number of LANCE/ILLAC disconnects that occured because the interface was disabled |
| 1.3.6.1.4.1.187.3.10.7.1.1.3 | ColumncDot3MauDisconnect | read-only | mandatory | Number of LANCE/ILLAC disconnects that occured because m_lance_cs_mau_connected was 0. |
| 1.3.6.1.4.1.187.3.10.7.1.1.4 | ColumncDot3Babbles | read-only | mandatory | Number of times the LANCE/ILACC Babble bit was set. |
| 1.3.6.1.4.1.187.3.10.7.1.1.5 | ColumncDot3MerrDisconnect | read-only | mandatory | Number of LANCE/ILLAC disconnects that occured because the memory error bit was set. |
| 1.3.6.1.4.1.187.3.10.7.1.1.6 | ColumncDot3TxonDisconnect | read-only | mandatory | Number of LANCE/ILLAC disconnects that occured because the txon bit was off. |
| 1.3.6.1.4.1.187.3.10.7.1.1.7 | ColumncDot3RxonDisconnect | read-only | mandatory | Number of LANCE/ILLAC disconnects that occured because the rxon bit was off. |
| 1.3.6.1.4.1.187.3.10.7.1.1.8 | ColumncDot3XmitFailure | read-only | mandatory | Number of LANCE/ILLAC disconnects that occured because no packets were received and every transmit attempt resulted in a failure. |
| 1.3.6.1.4.1.187.3.10.7.1.1.9 | ColumncDot3XmitBuffErr | read-only | mandatory | Number of LANCE/ILLAC transmit buffer errors that occured. |
| 1.3.6.1.4.1.187.3.10.7.1.1.10 | ColumncDot3XmitUflo | read-only | mandatory | Number of LANCE/ILLAC transmit underflo errors that occured. |
| 1.3.6.1.4.1.187.3.10.7.1.1.11 | ColumncDot3RcvBuffErr | read-only | mandatory | Number of LANCE/ILLAC receive buffer errors that occured. |
| 1.3.6.1.4.1.187.3.10.7.1.1.12 | ColumncDot3RcvOflo | read-only | mandatory | Number of LANCE/ILLAC receive overflo errors that occured. |
| 1.3.6.1.4.1.187.3.10.7.1.1.13 | ColumncDot3Startless | read-only | mandatory | Number of times that the driver did not get a start-of-message when one was expected. This if for reception. |
| 1.3.6.1.4.1.187.3.10.7.1.1.14 | ColumncDot3Endless | read-only | mandatory | Number of times that the driver detected the start of one packet without detecting the end of the previous packet. This is for reception. |
| 1.3.6.1.4.1.187.3.11 | NodecSnmp | |||
| 1.3.6.1.4.1.187.3.11.1 | NodecSnmpCommunities | |||
| 1.3.6.1.4.1.187.3.11.1.1 | ScalarcSnmpInCommunityMessages | read-only | mandatory | Number of messages received that use the community- based authentication scheme. |
| 1.3.6.1.4.1.187.4 | NodecConstellation | |||
| 1.3.6.1.4.1.187.4.1 | ScalarcConstellationAvailableBuffers | read-only | mandatory | Count of available data buffers |
| 1.3.6.1.4.1.187.4.2 | ScalarcConstellationInitialBuffers | read-only | mandatory | Initial amount of buffers available at system startup. |
| 1.3.6.1.4.1.187.4.3 | ScalarcConstallationBufferDataLength | read-only | mandatory | Number of data bytes that can be stored in each buffer. |
| 1.3.6.1.4.1.187.4.4 | ScalarcConstellationInstructionRam | read-only | mandatory | Number of bytes of system instruction ram available. This is fast, zero-wait-state RAM. |
| 1.3.6.1.4.1.187.4.5 | ScalarcConstellationGlobalDataRam | read-only | mandatory | Number of bytes of global data ram available. This is RAM contains I/O buffers and other data structures for which zero-wait-state access is not required by th… |
| 1.3.6.1.4.1.187.4.6 | ScalarcConstellationFastDataRam | read-only | mandatory | Number of bytes of fast data ram available. This is RAM contains data structures for which the CPU requires zero-wait-state access, such as the bridge forwardi… |
| 1.3.6.1.4.1.187.5 | NodecProxys | |||
| 1.3.6.1.4.1.187.5.1 | NodecProxyLb | |||
| 1.3.6.1.4.1.187.5.1.1 | NodecProxyLb0 | |||
| 1.3.6.1.4.1.187.5.1.2 | NodecProxyLb1 | |||
| 1.3.6.1.4.1.187.5.1.3 | NodecProxyLb2 | |||
| 1.3.6.1.4.1.187.5.1.4 | NodecProxyLb3 | |||
| 1.3.6.1.4.1.187.5.2 | NodecProxyLr | |||
| 1.3.6.1.4.1.187.5.2.1 | NodecProxyLr0 | |||
| 1.3.6.1.4.1.187.6 | NodecConfig | |||
| 1.3.6.1.4.1.187.6.1 | NodecConfigSystem | |||
| 1.3.6.1.4.1.187.6.1.1 | NodecConfSysInfo | |||
| 1.3.6.1.4.1.187.6.1.1.1 | ScalarcLocalTime | read-write | mandatory | This entity is a string in the format hh:mm [am|pm] representing the local time on the device. |
| 1.3.6.1.4.1.187.6.1.1.2 | ScalarcLocalDate | read-write | mandatory | This entity is a string in the format mm/dd/yy or dd-mm-yy representing the local date on the device. |
| 1.3.6.1.4.1.187.6.1.1.4 | ScalarcLocalCtpMode | read-write | mandatory | This entity determines whether the local console is using standard vt100 key mappings or extended key mappings. |
| 1.3.6.1.4.1.187.6.1.1.5 | ScalarcRemoteCtpMode | read-write | mandatory | This entity determines whether remotely logged in consoles use standard vt100 key mappings or extended key mappings. |
| 1.3.6.1.4.1.187.6.1.1.6 | ScalarcBridgeStatsAveraging | read-write | mandatory | This entity determines whether the bridge statistics screens use time averaged or absolute values |
| 1.3.6.1.4.1.187.6.1.1.7 | ScalarcBranchTargetCache | read-write | mandatory | This entity determines whether the CPU's branch target cache is enabled or not. |
| 1.3.6.1.4.1.187.6.1.2 | NodecConfOperAcct | |||
| 1.3.6.1.4.1.187.6.1.2.1 | TablecOperAcctTable | not-accessible | mandatory | This table allows an administrator to configure the operar accounts which grant access to the system. There are up to 60 accounts in the system. |
| 1.3.6.1.4.1.187.6.1.2.1.1 | RowcOperAcctEntry | not-accessible | mandatory | Information on one entry in the operator accounts database. |
| 1.3.6.1.4.1.187.6.1.2.1.1.1 | ColumncOperIndex | read-write | mandatory | This variable indexes the table of operator accounts. |
| 1.3.6.1.4.1.187.6.1.2.1.1.2 | ColumncOperID | read-write | mandatory | The name of the account |
| 1.3.6.1.4.1.187.6.1.2.1.1.3 | ColumncOperPriv | read-write | mandatory | This variable gives the privileges associated with a particular account. Valid values for the field are: privNone delete account, privOper operator privileges,… |
| 1.3.6.1.4.1.187.6.1.2.1.1.4 | ColumncOperPasswd | read-write | mandatory | This is the password assocated with the given account. A get on this variable will return an empty string. |
| 1.3.6.1.4.1.187.6.1.2.1.1.5 | ColumncOperStatus | read-write | mandatory | This is the current status of the row. The only valid values for a manager to set this value to are createRequest(2) or invalid(4). The agent may return any of… |
| 1.3.6.1.4.1.187.6.2 | NodecConfigLan | |||
| 1.3.6.1.4.1.187.6.2.1 | NodecConfigEther | |||
| 1.3.6.1.4.1.187.6.2.2 | NodecConfigTwp | |||
| 1.3.6.1.4.1.187.6.3 | NodecConfigWan | |||
| 1.3.6.1.4.1.187.6.3.1 | NodecConfigSerChan | |||
| 1.3.6.1.4.1.187.6.3.3 | NodecConfigWideAreaGroups | |||
| 1.3.6.1.4.1.187.6.5 | NodecConfigBridge | |||
| 1.3.6.1.4.1.187.6.5.1 | NodecConfigLogicalBridge | |||
| 1.3.6.1.4.1.187.6.6 | NodecIpAddress | |||
| 1.3.6.1.4.1.187.6.7 | NodecConfigIpRouter | |||
| 1.3.6.1.4.1.187.6.7.5 | NodecConfigAcceptLists | |||
| 1.3.6.1.4.1.187.6.7.6 | NodecConfigPropagateLists | |||
| 1.3.6.1.4.1.187.6.7.9 | NodecIpFilters | |||
| 1.3.6.1.4.1.187.6.8 | NodecConfigIpxRouter | |||
| 1.3.6.1.4.1.187.6.8.1 | NodecConfigIpxBridgeIf | |||
| 1.3.6.1.4.1.187.6.8.2 | NodecConfigIpxRouterFilters | |||
| 1.3.6.1.4.1.187.6.9 | NodecConfigAppleTalk | |||
| 1.3.6.1.4.1.187.6.9.1 | NodecConfigAtIf | |||
| 1.3.6.1.4.1.187.6.10 | NodecConfigNetProtocol | |||
| 1.3.6.1.4.1.187.6.10.1 | NodecConfigSnmp | |||
| 1.3.6.1.4.1.187.6.10.1.1 | TablecSnmpCommunityTable | not-accessible | mandatory | Constellation proprietary information about configured SNMP communities. Managers can configure communities, but at least one community must be configured via … |
| 1.3.6.1.4.1.187.6.10.1.1.1 | RowcSnmpCommunityEntry | not-accessible | mandatory | Each entry contains information about the name of a community, the destination to which to send traps, the interface to report on, and the access allowed by th… |
| 1.3.6.1.4.1.187.6.10.1.1.1.1 | ColumncSnmpCommunityIndex | read-only | mandatory | This variable is a unique index into the snmp community table. |
| 1.3.6.1.4.1.187.6.10.1.1.1.2 | ColumncSnmpCommunity | read-write | mandatory | This variable represents the name of a community which the agent recognizes. Each community must have a unique name. |
| 1.3.6.1.4.1.187.6.10.1.1.1.3 | ColumncSnmpCommunityIf | read-write | mandatory | This variable associates an interface with the given community. Each community is associated with exactly one interface. |
| 1.3.6.1.4.1.187.6.10.1.1.1.4 | ColumncSnmpCommunityAccess | read-write | mandatory | This variable determines whether the agent using this community may set or only get variables in the MIB. |
| 1.3.6.1.4.1.187.6.10.1.1.1.5 | ColumncSnmpCommunityTrapAddress | read-write | mandatory | This variable represents the address to which the agent will send traps on behalf of the given community. |
| 1.3.6.1.4.1.187.6.10.1.1.1.6 | ColumncSnmpCommunityTrapPort | read-write | mandatory | This variable represents the port to which the agent will send traps on behalf of the given community. |
| 1.3.6.1.4.1.187.6.10.1.1.1.7 | ColumncSnmpCommunityTrapEnabled | read-write | mandatory | This variable determines whether the agent will send traps on behalf of the given community. |
| 1.3.6.1.4.1.187.6.10.2 | NodecConfigArp | |||
| 1.3.6.1.4.1.187.6.10.3 | NodecConfigTcp | |||
| 1.3.6.1.4.1.187.6.10.3.1 | ScalarcTcpKeepalive | read-write | mandatory | This variable describes, in minutes, how long the TCP waits between keepalive probes. |
| 1.3.6.1.4.1.187.6.10.4 | NodecConfigTelnet | |||
| 1.3.6.1.4.1.187.6.10.4.1 | ScalarcTelnetPort | read-write | mandatory | This parameter tells the TELNET protocol on which to listen for incoming calls. |
| 1.3.6.1.4.1.187.6.10.4.2 | ScalarcTelnetNegotiate | read-write | mandatory | This parameter tells the TELNET protocol whether to negotiate negotiable parameters. |
| 1.3.6.1.4.1.187.6.10.5 | NodecConfigHostTable | |||
| 1.3.6.1.4.1.187.6.11 | NodecConfigSoftwareQueues | |||
| 1.3.6.1.4.1.187.6.11.1 | TablecEtherSWQTable | not-accessible | mandatory | This table allows contains information about the maximum size and maximum lifetime of each of the packet queues on the LAN ports. |
| 1.3.6.1.4.1.187.6.11.1.1 | RowcEtherSWQEntry | not-accessible | mandatory | Each entry contains software queue information for one interface. |
| 1.3.6.1.4.1.187.6.11.1.1.1 | ColumncEtherSWQIndex | read-only | mandatory | This index is the number of one of the ethernet interfaces. The port names are mapped to integers thusly: e1a - e8a are entries 1-8; e1b - e8b are entries 9-16. |
| 1.3.6.1.4.1.187.6.11.1.1.2 | ColumncEtherSWQMaxSize | read-write | mandatory | The maximum number of packets that may be in the queue at one time for this interface. |
| 1.3.6.1.4.1.187.6.11.1.1.3 | ColumncEtherSWQMaxTtl | read-write | mandatory | The maximum time in milliseconds that a packet may remain in the queue for this interface. |
| 1.3.6.1.4.1.187.6.12 | ScalarcResetNovram | read-write | mandatory | When this entity is set, novram is cleared. |
| 1.3.6.1.4.1.187.6.13 | ScalarcRestartSystem | read-write | mandatory | When this entity is set, the system is restarted. |
| 1.3.6.1.4.1.187.6.14 | NodecConfigFlashDnld | |||
| 1.3.6.1.4.1.187.6.14.1 | ScalarcFlashIpAddress | read-write | mandatory | IP address of server with flash download file. |
| 1.3.6.1.4.1.187.6.14.2 | ScalarcFlashFileName | read-write | mandatory | Name of flash download file. |
| 1.3.6.1.4.1.187.6.14.3 | ScalarcFlashBootFlag | read-write | mandatory | Flag to determine whether or not to load new flash code. |
| 1.3.6.1.4.1.187.6.14.4 | ScalarcFlashGatewayIpAddr | read-write | mandatory | IP address of nearest gateway. This variable should only be set if the TFTP server is not on the same network as the bridge. |
| 1.3.6.1.4.1.187.7 | NodecMonitor | |||
| 1.3.6.1.4.1.187.7.1 | NodecMonitorSystem | |||
| 1.3.6.1.4.1.187.7.1.1 | NodecMonitorSystemInfo | |||
| 1.3.6.1.4.1.187.7.1.2 | NodecMonitorHeapStats | |||
| 1.3.6.1.4.1.187.7.1.3 | NodecMonitorLoginHistory | |||
| 1.3.6.1.4.1.187.7.1.3.1 | TablecLoginTable | not-accessible | mandatory | This table gives a record of recent logins to the system. |
| 1.3.6.1.4.1.187.7.1.3.1.1 | RowcLoginEntry | not-accessible | mandatory | Each entry describes one login to the system, either remote or local. |
| 1.3.6.1.4.1.187.7.1.3.1.1.1 | ColumncLoginIndex | read-only | mandatory | This variable indexes the entries in the Login History Table. |
| 1.3.6.1.4.1.187.7.1.3.1.1.2 | ColumncLoginUser | read-only | mandatory | This variable contains the login name of the user for the current row in the table. |
| 1.3.6.1.4.1.187.7.1.3.1.1.3 | ColumncLoginLocal | read-only | mandatory | This variable describes whether the entry specified in this row of the table represents a login from the local console (yes(1)) or remotely (no(2)). |
| 1.3.6.1.4.1.187.7.1.3.1.1.4 | ColumncLoginRemote | read-only | mandatory | This entry gives the remote IP address of a remote login. |
| 1.3.6.1.4.1.187.7.1.3.2 | ScalarcLoginFails | read-only | mandatory | This variable returns the number of attempted logins which have failed. |
| 1.3.6.1.4.1.187.7.2 | NodecMonitorBridges | |||
| 1.3.6.1.4.1.187.7.2.3 | TablecNodeByAddressTable | not-accessible | mandatory | This Table allows the manager to map MAC addresses to hash buckets and ports in the router. |
| 1.3.6.1.4.1.187.7.2.3.1 | RowcNodeByAddressEntry | not-accessible | mandatory | Each entry contains the entry for one MAC address. |
| 1.3.6.1.4.1.187.7.2.3.1.1 | ColumncNodeByAddressAddr | read-only | mandatory | This variable is the MAC address for which the manager wishes to find the hash bucket and port. |
| 1.3.6.1.4.1.187.7.2.3.1.2 | ColumncNodeByAddressBridge | read-only | mandatory | This variable is the bridge on which the given MAC address is reached. |
| 1.3.6.1.4.1.187.7.2.3.1.3 | ColumncNodeByAddressPort | read-only | mandatory | This variable is the port through which the given MAC address is reached. |
| 1.3.6.1.4.1.187.7.2.3.1.4 | ColumncNodeByAddressStatus | read-only | mandatory | This variable gives the status of the given MAC address. If the status is 'permanent,' the contents of cNodeByAddressPort have no meaning. |
| 1.3.6.1.4.1.187.7.2.4 | TablecNodeByHashTable | not-accessible | mandatory | This table may be used by the manager to read the contents of the node table, in the order in which entries appear in the hash table. |
| 1.3.6.1.4.1.187.7.2.4.1 | RowcNodeByHashEntry | not-accessible | mandatory | Each entry in this table represents one mapping of a MAC address to a bridge. |
| 1.3.6.1.4.1.187.7.2.4.1.1 | ColumncNodeByHashIndex | read-only | mandatory | This variable is an abstract index into the hash table. The first entry in bucket 0 is entry 1, the second entry in bucket 0 is 2, the first entry in bucket 1 … |
| 1.3.6.1.4.1.187.7.2.4.1.2 | ColumncNodeByHashBucket | read-only | mandatory | This entry describes in which bucket in the hash table the given entry appears. |
| 1.3.6.1.4.1.187.7.2.4.1.3 | ColumncNodeByHashAddress | read-only | mandatory | This entry describes the MAC address of the given entry. |
| 1.3.6.1.4.1.187.7.2.4.1.4 | ColumncNodeByHashBridge | read-only | mandatory | This variable is the bridge on which the given MAC address is reached. |
| 1.3.6.1.4.1.187.7.2.4.1.5 | ColumncNodeByHashPort | read-only | mandatory | This variable describes the port through which the corresponding cNodeByHashAddress is accessed. |
| 1.3.6.1.4.1.187.7.2.4.1.6 | ColumncNodeByHashStatus | read-only | mandatory | This variable gives the status of the given MAC address. If the status is 'permanent,' the contents of cNodeByHashPort have no meaning. |
| 1.3.6.1.4.1.187.7.3 | NodecMonitorPhysInterfaces | |||
| 1.3.6.1.4.1.187.7.3.1 | TablecHardwareStatusTable | not-accessible | mandatory | This table provides a brief description of of the contents and status of each hardware slot. |
| 1.3.6.1.4.1.187.7.3.1.1 | RowcHardwareStatusEntry | not-accessible | mandatory | Each entry in this table provides information about one LAN or WAN hardware slot. |
| 1.3.6.1.4.1.187.7.3.1.1.1 | ColumncHardwareStatusIndex | read-only | mandatory | This variable is the index into the table of values. |
| 1.3.6.1.4.1.187.7.3.1.1.2 | ColumncHardwareStatusSlot | read-only | mandatory | This variable provides the slot number as it would appear on the 'Hardware Configuration' screen of the console interface. |
| 1.3.6.1.4.1.187.7.3.1.1.3 | ColumncHardwareStatusContents | read-only | mandatory | This variable describes the hardware associated with a given slot. |
| 1.3.6.1.4.1.187.7.3.1.1.4 | ColumncHardwareStatusMacAddr | read-only | mandatory | This variable contains the MAC address of the hardware in the given slot. |
| 1.3.6.1.4.1.187.7.3.1.1.5 | ColumncHardwareStatusSerialNo | read-only | mandatory | This variable returns the constellation serial number for the part in the accessed slot. |
| 1.3.6.1.4.1.187.7.3.1.1.6 | ColumncHardwareStatusRevision | read-only | mandatory | This variable describes the revision of the hardware in the accessed slot. |
| 1.3.6.1.4.1.187.7.3.1.1.7 | ColumncHardwareStatusStatus | read-only | mandatory | This variable gives the status of the hardware. |
| 1.3.6.1.4.1.187.7.4 | NodecMonitorProto | |||
| 1.3.6.1.4.1.187.7.4.3 | NodecTcpStats | |||
| 1.3.6.1.4.1.187.7.4.4 | NodecIpStats | |||
| 1.3.6.1.4.1.187.7.4.5 | NodecIcmpStats | |||
| 1.3.6.1.4.1.187.7.4.9 | NodecWanStats | |||
| 1.3.6.1.4.1.187.7.5 | NodecMonitorIpRouter | |||
| 1.3.6.1.4.1.187.7.5.1 | NodecIpRoutingStats | |||
| 1.3.6.1.4.1.187.7.5.3 | NodecEgpStats | |||
| 1.3.6.1.4.1.187.7.5.5 | NodecRipStats | |||
| 1.3.6.1.4.1.187.7.5.6 | NodecHelloStats | |||
| 1.3.6.1.4.1.187.7.6 | NodecMonitorIpxRouter | |||
| 1.3.6.1.4.1.187.7.6.1 | NodecIpxStats | |||
| 1.3.6.1.4.1.187.7.7 | NodecMonitorAtRouter | |||
| 1.3.6.1.4.1.187.7.7.1 | NodecAtRouterStats | |||
| 1.3.6.1.4.1.187.7.8 | NodecDiagnostics | |||
| 1.3.6.1.4.1.187.7.8.1 | ScalarcClearErrorLog | read-write | mandatory | Setting this variable erases the accumulated error log from NOVRAM. Reading it is meaningless. |
| 1.3.6.1.4.1.187.7.8.2 | TablecErrorLogTable | not-accessible | mandatory | This table contains the text of errors detected. Errors are stored in nonvolatile memory, and hence preserved across reboots of the box. |
| 1.3.6.1.4.1.187.7.8.2.1 | RowcErrorLogEntry | not-accessible | mandatory | Each entry contains the text of one error message. |
| 1.3.6.1.4.1.187.7.8.2.1.1 | ColumncErrorLogIndex | read-only | mandatory | This is the index of an error message, with higher indices indicating more recent messages. |
| 1.3.6.1.4.1.187.7.8.2.1.2 | ColumncErrorLogMessage | read-only | mandatory | This is the text of an error message. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| PhysAddress | OCTET STRING | ||
| Timeout | INTEGER |