LEAN-MIB
211 objects
The preliminary MIB module to describe generic objects for the Lean.
Imported Objects
| RFC1155-SMI | enterprises |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString PhysAddress RowStatus TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.42 | Identitytellabs | The preliminary MIB module to describe generic objects for the Lean. | ||
| 1.3.6.1.4.1.42.1 | NodeleanMIB | |||
| 1.3.6.1.4.1.42.1.1 | NodefrnetservMIB | |||
| 1.3.6.1.4.1.42.1.1.1 | NodefrnetservObjects | |||
| 1.3.6.1.4.1.42.1.1.1.1 | TablefrLportTable | not-accessible | current | The Frame Relay Logical Port Information table. |
| 1.3.6.1.4.1.42.1.1.1.1.1 | RowfrLportEntry | not-accessible | current | An entry in the Frame Relay Logical Port Information table. |
| 1.3.6.1.4.1.42.1.1.1.1.1.1 | ColumnfrLportNumPlan | read-only | current | The value of this object identifies the network address numbering plan for this UNI/NNI logical port. The network address is the object ifPhysAddress. The valu… |
| 1.3.6.1.4.1.42.1.1.1.1.1.2 | ColumnfrLportContact | read-only | current | The value of this object identifies the network contact for this UNI/NNI logical port. |
| 1.3.6.1.4.1.42.1.1.1.1.1.3 | ColumnfrLportLocation | read-only | current | The value of this object identifies the Frame Relay network location for this UNI/NNI logical port. |
| 1.3.6.1.4.1.42.1.1.1.1.1.4 | ColumnfrLportType | read-only | current | The value of this object identifies the type of network interface for this logical port. |
| 1.3.6.1.4.1.42.1.1.1.1.1.5 | ColumnfrLportAddrDLCILen | read-only | current | The value of this object identifies the Q.922 Address field length and DLCI length for this UNI/NNI logical port. |
| 1.3.6.1.4.1.42.1.1.1.1.1.6 | ColumnfrLportVCSigProtocol | read-only | current | The value of this object identifies the Local In-Channel Signaling Protocol that is used for this frame relay UNI/NNI logical port. |
| 1.3.6.1.4.1.42.1.1.1.1.1.7 | ColumnfrLportVCSigPointer | read-only | current | The value of this object is used as a pointer to the table that contains the Local In-Channel Signaling Protocol parameters and errors for this UNI/NNI logical… |
| 1.3.6.1.4.1.42.1.1.1.2 | TablefrMgtVCSigTable | not-accessible | current | The Frame Relay Management VC Signaling Parameters and Errors table. |
| 1.3.6.1.4.1.42.1.1.1.2.1 | RowfrMgtVCSigEntry | not-accessible | current | An entry in the Frame Relay Management VC Signaling Parameters Errors table. |
| 1.3.6.1.4.1.42.1.1.1.2.1.1 | ColumnfrMgtVCSigProced | read-only | current | The value of this object identifies the Local In-Channel Signaling Procedure that is used for this UNI/NNI logical port. The UNI/NNI logical port can be perfor… |
| 1.3.6.1.4.1.42.1.1.1.2.1.2 | ColumnfrMgtVCSigUserN391 | read-only | current | The value of this object identifies the User-side N391 full status polling cycle value for this UNI/NNI logical port. If the logical port is not performing use… |
| 1.3.6.1.4.1.42.1.1.1.2.1.3 | ColumnfrMgtVCSigUserN392 | read-only | current | The value of this object identifies the User-side N392 error threshold value for this UNI/NNI logical port. If the logical port is not performing user-side pro… |
| 1.3.6.1.4.1.42.1.1.1.2.1.4 | ColumnfrMgtVCSigUserN393 | read-only | current | The value of this object identifies the User-side N393 monitored events count value for this UNI/NNI logical port. If the logical port is not performing user-s… |
| 1.3.6.1.4.1.42.1.1.1.2.1.5 | ColumnfrMgtVCSigUserT391 | read-only | current | The value of this object identifies the User-side T391 link integrity verification polling timer value for this UNI/NNI logical port. If the logical port is no… |
| 1.3.6.1.4.1.42.1.1.1.2.1.6 | ColumnfrMgtVCSigNetN392 | read-only | current | The value of this object identifies the Network- side N392 error threshold value (nN2 for LMI) for this UNI/NNI logical port. If the logical port is not perfor… |
| 1.3.6.1.4.1.42.1.1.1.2.1.7 | ColumnfrMgtVCSigNetN393 | read-only | current | The value of this object identifies the Network- side N393 monitored events count value (nN3 for LMI) for this UNI/NNI logical port. If the logical port is not… |
| 1.3.6.1.4.1.42.1.1.1.2.1.8 | ColumnfrMgtVCSigNetT392 | read-only | current | The value of this object identifies the Network- side T392 polling verification timer value (nT2 for LMI) for this UNI/NNI logical port. If the logical port is… |
| 1.3.6.1.4.1.42.1.1.1.2.1.9 | ColumnfrMgtVCSigNetnN4 | read-only | current | The value of this object identifies the Network- side nN4 maximum status enquires received value for this UNI/NNI logical port. If the logical port is not perf… |
| 1.3.6.1.4.1.42.1.1.1.2.1.10 | ColumnfrMgtVCSigNetnT3 | read-only | current | The value of this object identifies the Network- side nT3 timer (for nN4 status enquires received) value for this UNI/NNI logical port. If the logical port is … |
| 1.3.6.1.4.1.42.1.1.1.2.1.11 | ColumnfrMgtVCSigUserLinkRelErrors | read-only | current | The number of user-side local in-channel signaling link reliability errors (i.e., non- receipt of Status/Status Enquiry messages or invalid sequence numbers in… |
| 1.3.6.1.4.1.42.1.1.1.2.1.12 | ColumnfrMgtVCSigUserProtErrors | read-only | current | The number of user-side local in-channel signaling protocol errors (i.e., protocol discriminator, message type, call reference, and mandatory information eleme… |
| 1.3.6.1.4.1.42.1.1.1.2.1.13 | ColumnfrMgtVCSigUserChanInactive | read-only | current | The number of times the user-side channel was declared inactive (i.e., N392 errors in N393 events) for this UNI/NNI logical port. If the logical port is not pe… |
| 1.3.6.1.4.1.42.1.1.1.2.1.14 | ColumnfrMgtVCSigNetLinkRelErrors | read-only | current | The number of network-side local in-channel signaling link reliability errors (i.e., non- receipt of Status/Status Enquiry messages or invalid sequence numbers… |
| 1.3.6.1.4.1.42.1.1.1.2.1.15 | ColumnfrMgtVCSigNetProtErrors | read-only | current | The number of network-side local in-channel signaling protocol errors (i.e., protocol discriminator, message type, call reference, and mandatory information el… |
| 1.3.6.1.4.1.42.1.1.1.2.1.16 | ColumnfrMgtVCSigNetChanInactive | read-only | current | The number of times the network-side channel was declared inactive (i.e., N392 errors in N393 events) for this UNI/NNI logical port. If the logical port is not… |
| 1.3.6.1.4.1.42.1.1.1.3 | TablefrPVCEndptTable | not-accessible | current | The Frame Relay PVC End-Point table. This table is used to model a PVC end-point. This table contains the traffic parameters and statistics for a PVC end-point. |
| 1.3.6.1.4.1.42.1.1.1.3.1 | RowfrPVCEndptEntry | not-accessible | current | An entry in the Frame Relay PVC Endpoint table. |
| 1.3.6.1.4.1.42.1.1.1.3.1.1 | ColumnfrPVCEndptDLCIIndex | not-accessible | current | The value of this object is equal to the DLCI value for this PVC end-point. |
| 1.3.6.1.4.1.42.1.1.1.3.1.2 | ColumnfrPVCEndptInMaxFrameSize | read-create | current | The value of this object is the size in octets of the largest frame relay information field for this PVC end-point in the ingress direction (into the frame rel… |
| 1.3.6.1.4.1.42.1.1.1.3.1.3 | ColumnfrPVCEndptInBc | read-create | current | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC end-point in the ingress direction (into the frame… |
| 1.3.6.1.4.1.42.1.1.1.3.1.4 | ColumnfrPVCEndptInBe | read-create | current | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC end-point in the ingress direction (into the frame re… |
| 1.3.6.1.4.1.42.1.1.1.3.1.5 | ColumnfrPVCEndptInCIR | read-create | current | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC end- point in the ingress direct… |
| 1.3.6.1.4.1.42.1.1.1.3.1.6 | ColumnfrPVCEndptOutMaxFrameSize | read-create | current | The value of this object is the size in octets of the largest frame relay information field for this PVC end-point in the egress direction (out of the frame re… |
| 1.3.6.1.4.1.42.1.1.1.3.1.7 | ColumnfrPVCEndptOutBc | read-create | current | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC end-point in the egress direction (out of the fram… |
| 1.3.6.1.4.1.42.1.1.1.3.1.8 | ColumnfrPVCEndptOutBe | read-create | current | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC end-point in the egress direction (out of the frame r… |
| 1.3.6.1.4.1.42.1.1.1.3.1.9 | ColumnfrPVCEndptOutCIR | read-create | current | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC end- point in the egress directi… |
| 1.3.6.1.4.1.42.1.1.1.3.1.10 | ColumnfrPVCEndptConnectIdentifier | read-only | current | This object is used to associate PVC end-points as being part of one PVC segment connection. This value of this object is equal to the value of frPVCConnectInd… |
| 1.3.6.1.4.1.42.1.1.1.3.1.11 | ColumnfrPVCEndptRowStatus | read-create | current | This object is used to create new rows in this table, modify existing rows, and to delete existing rows. To create a new PVC, the entries for the PVC segment e… |
| 1.3.6.1.4.1.42.1.1.1.3.1.12 | ColumnfrPVCEndptRcvdSigStatus | read-only | current | The value of this object identifies the PVC status received via the local in-channel signaling procedures for this PVC end-point. This object is only pertinent… |
| 1.3.6.1.4.1.42.1.1.1.3.1.13 | ColumnfrPVCEndptInFrames | read-only | current | The number of frames received by the network (ingress) for this PVC end-point. This includes any frames discarded by the network due to submitting more than Bc… |
| 1.3.6.1.4.1.42.1.1.1.3.1.14 | ColumnfrPVCEndptOutFrames | read-only | current | The number of frames sent by the network (egress) regardless of whether they are Bc or Be frames for this PVC end-point. |
| 1.3.6.1.4.1.42.1.1.1.3.1.15 | ColumnfrPVCEndptInDEFrames | read-only | current | The number of frames received by the network (ingress) with the DE bit set to (1) for this PVC end-point. |
| 1.3.6.1.4.1.42.1.1.1.3.1.16 | ColumnfrPVCEndptInExcessFrames | read-only | current | The number of frames received by the network (ingress) for this PVC end-point which were treated as excess traffic. Frames which are sent to the network with D… |
| 1.3.6.1.4.1.42.1.1.1.3.1.17 | ColumnfrPVCEndptOutExcessFrames | read-only | current | The number of frames sent by the network (egress) for this PVC end-point which were treated as excess traffic. (The DE bit may be set to one.) |
| 1.3.6.1.4.1.42.1.1.1.3.1.18 | ColumnfrPVCEndptInDiscards | read-only | current | The number of frames received by the the network (ingress) that were discarded due to traffic enforcement for this PVC end-point. |
| 1.3.6.1.4.1.42.1.1.1.3.1.19 | ColumnfrPVCEndptInOctets | read-only | current | The number of octets received by the network (ingress) for this PVC end-point. This counter should only count octets from the beginning of the frame relay head… |
| 1.3.6.1.4.1.42.1.1.1.3.1.20 | ColumnfrPVCEndptOutOctets | read-only | current | The number of octets sent by the network (egress) for this PVC end-point. This counter should only count octets from the beginning of the frame relay header fi… |
| 1.3.6.1.4.1.42.1.1.1.4 | ScalarfrPVCConnectIndexValue | read-only | current | This object contains an appropriate value to be used for frPVCConnectIndex when creating entries in the frPVCConnectTable. The value 0 indicates that no unassi… |
| 1.3.6.1.4.1.42.1.1.1.5 | TablefrPVCConnectTable | not-accessible | current | The Frame Relay PVC Connect table. A bi- directional PVC segment is modeled as one entry in this table. |
| 1.3.6.1.4.1.42.1.1.1.5.1 | RowfrPVCConnectEntry | not-accessible | current | An entry in the Frame Relay PVC Connect table. This entry is used to model a PVC segment in two directions. |
| 1.3.6.1.4.1.42.1.1.1.5.1.1 | ColumnfrPVCConnectIndex | not-accessible | current | The value of this object is equal to the frPVCConnectIndexValue obtained to uniquely identify this PVC segment connection. |
| 1.3.6.1.4.1.42.1.1.1.5.1.2 | ColumnfrPVCConnectLowIfIndex | not-accessible | current | The value of this object is equal to MIB II's ifIndex value of the UNI/NNI logical port for this PVC segment. The term low implies that this PVC segment end-po… |
| 1.3.6.1.4.1.42.1.1.1.5.1.3 | ColumnfrPVCConnectLowDLCIIndex | not-accessible | current | The value of this object is equal to the DLCI value for this end-point of the PVC segment. If the value is equal to zero, then this endpoint of the PVC segment… |
| 1.3.6.1.4.1.42.1.1.1.5.1.4 | ColumnfrPVCConnectHighIfIndex | not-accessible | current | The value of this object is equal to MIB II's ifIndex value for the UNI/NNI logical port for this PVC segment. The term high implies that this PVC segment end-… |
| 1.3.6.1.4.1.42.1.1.1.5.1.5 | ColumnfrPVCConnectHighDLCIIndex | not-accessible | current | The value of this object is equal to the egress DLCI value for this end-point of the PVC segment. |
| 1.3.6.1.4.1.42.1.1.1.5.1.6 | ColumnfrPVCConnectAdminStatus | read-create | current | The value of this object identifies the desired administrative status of this bi-directional PVC segment. The active state means the PVC segment is currently o… |
| 1.3.6.1.4.1.42.1.1.1.5.1.7 | ColumnfrPVCConnectL2hOperStatus | read-only | current | The value of this object identifies the current operational status of the PVC segment connection in one direction; (i.e., in the low to high direction). The ac… |
| 1.3.6.1.4.1.42.1.1.1.5.1.8 | ColumnfrPVCConnectH2lOperStatus | read-only | current | The value of this object identifies the current operational status of the PVC segment connection in one direction; (i.e., in the high to low direction). The ac… |
| 1.3.6.1.4.1.42.1.1.1.5.1.9 | ColumnfrPVCConnectL2hLastChange | read-only | current | The value of MIB II's sysUpTime object at the time this PVC segment entered its current operational state in the low to high direction. If the current state wa… |
| 1.3.6.1.4.1.42.1.1.1.5.1.10 | ColumnfrPVCConnectH2lLastChange | read-only | current | The value of MIB II's sysUpTime object at the time this PVC segment entered its current operational state in the high to low direction. If the current state wa… |
| 1.3.6.1.4.1.42.1.1.1.5.1.11 | ColumnfrPVCConnectRowStatus | read-create | current | The status of this entry in the frPVCConnectTable. This variable is used to create new connections for the PVC end-points and to change existing connections of… |
| 1.3.6.1.4.1.42.1.1.1.6 | TablefrAccountPVCTable | not-accessible | current | The Frame Relay Accounting PVC table. This table is used to perform accounting on a PVC segment end-point basis. |
| 1.3.6.1.4.1.42.1.1.1.6.1 | RowfrAccountPVCEntry | not-accessible | current | An entry in the Frame Relay Accounting PVC table. |
| 1.3.6.1.4.1.42.1.1.1.6.1.1 | ColumnfrAccountPVCDLCIIndex | not-accessible | current | The value of this object is equal to the DLCI value for this PVC segment end-point. |
| 1.3.6.1.4.1.42.1.1.1.6.1.2 | ColumnfrAccountPVCSegmentSize | read-only | current | The value of this object is equal to the Segment Size for this PVC segment end-point. |
| 1.3.6.1.4.1.42.1.1.1.6.1.3 | ColumnfrAccountPVCInSegments | read-only | current | The value of this object is equal to the number of segments received by this PVC segment end- point. |
| 1.3.6.1.4.1.42.1.1.1.6.1.4 | ColumnfrAccountPVCOutSegments | read-only | current | The value of this object is equal to the number of segments sent by this PVC segment end-point. |
| 1.3.6.1.4.1.42.1.1.1.7 | TablefrAccountLportTable | not-accessible | current | The Frame Relay Accounting Logical Port table. This table is used to perform accounting on a UNI/NNI Logical Port basis. |
| 1.3.6.1.4.1.42.1.1.1.7.1 | RowfrAccountLportEntry | not-accessible | current | An entry in the Frame Relay Accounting Logical Port table. |
| 1.3.6.1.4.1.42.1.1.1.7.1.1 | ColumnfrAccountLportSegmentSize | read-only | current | The value of this object is equal to the Segment Size for this UNI/NNI logical port. |
| 1.3.6.1.4.1.42.1.1.1.7.1.2 | ColumnfrAccountLportInSegments | read-only | current | The value of this object is equal to the number of segments received by this UNI/NNI logical port. |
| 1.3.6.1.4.1.42.1.1.1.7.1.3 | ColumnfrAccountLportOutSegments | read-only | current | The value of this object is equal to the number of segments sent by this UNI/NNI logical port. |
| 1.3.6.1.4.1.42.1.1.2 | NodefrnetservTraps | |||
| 1.3.6.1.4.1.42.1.1.2.1 | NotificationfrPVCConnectStatusChange | current | This trap indicates that the indicated PVC has changed state. This trap is not sent if an FR-UNI changes state; a linkDown or linkUp trap should be sent instea… | |
| 1.3.6.1.4.1.42.1.1.3 | NodefrnetservConformance | |||
| 1.3.6.1.4.1.42.1.1.3.1 | NodefrnetservGroups | |||
| 1.3.6.1.4.1.42.1.1.3.1.1 | GroupfrnetservLportGroup | current | A collection of objects providing information applicable to a Frame Relay Logical Port. | |
| 1.3.6.1.4.1.42.1.1.3.1.2 | GroupfrnetservMgtVCSigGroup | current | A collection of objects providing information applicable to the Local In-Channel Signaling Procedures used for a UNI/NNI logical port. | |
| 1.3.6.1.4.1.42.1.1.3.1.3 | GroupfrnetservPVCEndptGroup | current | A collection of objects providing information application to a Frame Relay PVC end-point. | |
| 1.3.6.1.4.1.42.1.1.3.1.4 | GroupfrnetservPVCConnectGroup | current | A collection of objects providing information applicable to a Frame Relay PVC connection. | |
| 1.3.6.1.4.1.42.1.1.3.1.5 | GroupfrnetservAccountPVCGroup | current | A collection of objects providing accounting information application to a Frame Relay PVC end-point. | |
| 1.3.6.1.4.1.42.1.1.3.1.6 | GroupfrnetservAccountLportGroup | current | A collection of objects providing accounting information application to a Frame Relay logical port. | |
| 1.3.6.1.4.1.42.1.1.3.2 | NodefrnetservCompliances | |||
| 1.3.6.1.4.1.42.1.1.3.2.1 | CompliancefrnetservCompliance | read-only | current | The compliance statement for SNMPv2 entities which have Frame Relay Network Service Interfaces. |
| 1.3.6.1.4.1.42.1.2 | NodeatmMIB | |||
| 1.3.6.1.4.1.42.1.2.1 | NodeatmMIBObjects | |||
| 1.3.6.1.4.1.42.1.2.1.1 | NodeatmTrafficDescriptorTypes | |||
| 1.3.6.1.4.1.42.1.2.1.1.1 | IdentityatmNoTrafficDescriptor | current | This identifies the no ATM traffic descriptor type. Parameters 1, 2, 3, 4, and 5 are not used. This traffic descriptor type can be used for best effort traffic. | |
| 1.3.6.1.4.1.42.1.2.1.1.2 | IdentityatmNoClpNoScr | current | This traffic descriptor is for no CLP and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate in cells p… | |
| 1.3.6.1.4.1.42.1.2.1.1.3 | IdentityatmClpNoTaggingNoScr | current | This traffic descriptor is for no CLP without tagging and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell… | |
| 1.3.6.1.4.1.42.1.2.1.1.4 | IdentityatmClpTaggingNoScr | current | This traffic descriptor is for CLP with tagging and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate … | |
| 1.3.6.1.4.1.42.1.2.1.1.5 | IdentityatmNoClpScr | current | This traffic descriptor is for no CLP with Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate in cells per… | |
| 1.3.6.1.4.1.42.1.2.1.1.6 | IdentityatmClpNoTaggingScr | current | This traffic descriptor is for CLP with Sustained Cell Rate and no tagging. The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate … | |
| 1.3.6.1.4.1.42.1.2.1.1.7 | IdentityatmClpTaggingScr | current | This traffic descriptor is for CLP with tagging and Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate in … | |
| 1.3.6.1.4.1.42.1.2.1.2 | TableatmInterfaceConfTable | not-accessible | current | This table contains ATM local interface configuration parameters, one entry per ATM interface port. |
| 1.3.6.1.4.1.42.1.2.1.2.1 | RowatmInterfaceConfEntry | not-accessible | current | This list contains ATM interface configuration parameters and state variables. |
| 1.3.6.1.4.1.42.1.2.1.2.1.1 | ColumnatmInterfaceMaxVpcs | read-write | current | The maximum number of VPCs (PVCs and SVCs) supported at this ATM interface. At the ATM UNI, the maximum number of VPCs (PVCs and SVCs) ranges from 0 to 256 onl… |
| 1.3.6.1.4.1.42.1.2.1.2.1.2 | ColumnatmInterfaceMaxVccs | read-write | current | The maximum number of VCCs (PVCs and SVCs) supported at this ATM interface. |
| 1.3.6.1.4.1.42.1.2.1.2.1.3 | ColumnatmInterfaceConfVpcs | read-only | current | The number of VPCs (PVCs and SVCs) configured for use at this ATM interface. At the ATM UNI, the configured number of VPCs (PVCs and SVCs) can range from 0 to … |
| 1.3.6.1.4.1.42.1.2.1.2.1.4 | ColumnatmInterfaceConfVccs | read-only | current | The number of VCCs (PVCs and SVCs) configured for use at the ATM interface. |
| 1.3.6.1.4.1.42.1.2.1.2.1.5 | ColumnatmInterfaceMaxActiveVpiBits | read-write | current | The maximum number of active VPI bits configured for use at the ATM interface. At the ATM UNI, the maximum number of active VPI bits configured for use ranges … |
| 1.3.6.1.4.1.42.1.2.1.2.1.6 | ColumnatmInterfaceMaxActiveVciBits | read-write | current | The maximum number of active VCI bits configured for use at this ATM interface. |
| 1.3.6.1.4.1.42.1.2.1.2.1.7 | ColumnatmInterfaceIlmiVpi | read-write | current | The VPI value of the VCC supporting the ILMI at this ATM interface. If the values of atmInterfaceIlmiVpi and atmInterfaceIlmiVci are both equal to zero then th… |
| 1.3.6.1.4.1.42.1.2.1.2.1.8 | ColumnatmInterfaceIlmiVci | read-write | current | The VCI value of the VCC supporting the ILMI at this ATM interface. If the values of atmInterfaceIlmiVpi and atmInterfaceIlmiVci are both equal to zero then th… |
| 1.3.6.1.4.1.42.1.2.1.2.1.9 | ColumnatmInterfaceAddressType | read-only | current | The type of primary ATM address configured for use at this ATM interface. |
| 1.3.6.1.4.1.42.1.2.1.2.1.10 | ColumnatmInterfaceAdminAddress | read-only | current | An address assigned for administrative purposes, for example, an address associated with the service provider side of a public network UNI. If this interface h… |
| 1.3.6.1.4.1.42.1.2.1.2.1.11 | ColumnatmInterfaceMyNeighborIpAddress | read-write | current | The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams… |
| 1.3.6.1.4.1.42.1.2.1.2.1.12 | ColumnatmInterfaceMyNeighborIfName | read-write | current | The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is mana… |
| 1.3.6.1.4.1.42.1.2.1.3 | TableatmInterfaceDs3PlcpTable | not-accessible | current | This table contains ATM interface DS3 PLCP parameters and state variables, one entry per ATM interface port. |
| 1.3.6.1.4.1.42.1.2.1.3.1 | RowatmInterfaceDs3PlcpEntry | not-accessible | current | This list contains DS3 PLCP parameters and state variables at the ATM interface. |
| 1.3.6.1.4.1.42.1.2.1.3.1.1 | ColumnatmInterfaceDs3PlcpSEFSs | read-only | current | The number of DS3 PLCP Severely Errored Framing Second (SEFS). Each SEFS represents a one-second interval which contains one or more SEF event. |
| 1.3.6.1.4.1.42.1.2.1.3.1.2 | ColumnatmInterfaceDs3PlcpAlarmState | read-only | current | This variable indicates if there is an alarm present for the DS3 PLCP. The value receivedFarEndAlarm means that the DS3 PLCP has received an incoming Yellow Si… |
| 1.3.6.1.4.1.42.1.2.1.3.1.3 | ColumnatmInterfaceDs3PlcpUASs | read-only | current | The counter associated with the number of Unavailable Seconds encountered by the PLCP. |
| 1.3.6.1.4.1.42.1.2.1.4 | TableatmInterfaceTCTable | not-accessible | current | This table contains ATM interface TC Sublayer parameters and state variables, one entry per ATM interface port. |
| 1.3.6.1.4.1.42.1.2.1.4.1 | RowatmInterfaceTCEntry | not-accessible | current | This list contains TC Sublayer parameters and state variables at the ATM interface. |
| 1.3.6.1.4.1.42.1.2.1.4.1.1 | ColumnatmInterfaceOCDEvents | read-only | current | The number of times the Out of Cell Delineation (OCD) events occur. If seven consecutive ATM cells have Header Error Control (HEC) violations, an OCD event occ… |
| 1.3.6.1.4.1.42.1.2.1.4.1.2 | ColumnatmInterfaceTCAlarmState | read-only | current | This variable indicates if there is an alarm present for the TC Sublayer. The value lcdFailure indicates that a Loss of Cell Delineation (LCD) failure state ha… |
| 1.3.6.1.4.1.42.1.2.1.5 | TableatmTrafficDescrParamTable | not-accessible | current | This table contains information on ATM traffic descriptor type and the associated parameters. |
| 1.3.6.1.4.1.42.1.2.1.5.1 | RowatmTrafficDescrParamEntry | not-accessible | current | This list contains ATM traffic descriptor type and the associated parameters. |
| 1.3.6.1.4.1.42.1.2.1.5.1.1 | ColumnatmTrafficDescrParamIndex | not-accessible | current | This object is used by the virtual link table (i.e., VPL or VCL table) to identify the row of this table. |
| 1.3.6.1.4.1.42.1.2.1.5.1.2 | ColumnatmTrafficDescrType | read-create | current | The value of this object identifies the type of ATM traffic descriptor. The type may indicate no traffic descriptor or traffic descriptor with one or more para… |
| 1.3.6.1.4.1.42.1.2.1.5.1.3 | ColumnatmTrafficDescrParam1 | read-create | current | The first parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType. |
| 1.3.6.1.4.1.42.1.2.1.5.1.4 | ColumnatmTrafficDescrParam2 | read-create | current | The second parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType. |
| 1.3.6.1.4.1.42.1.2.1.5.1.5 | ColumnatmTrafficDescrParam3 | read-create | current | The third parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType. |
| 1.3.6.1.4.1.42.1.2.1.5.1.6 | ColumnatmTrafficDescrParam4 | read-create | current | The fourth parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType. |
| 1.3.6.1.4.1.42.1.2.1.5.1.7 | ColumnatmTrafficDescrParam5 | read-create | current | The fifth parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType. |
| 1.3.6.1.4.1.42.1.2.1.5.1.8 | ColumnatmTrafficQoSClass | read-create | current | The value of this object identifies the QoS Class. Four Service classes have been specified in the ATM Forum UNI Specification: Service Class A: Constant bit r… |
| 1.3.6.1.4.1.42.1.2.1.5.1.9 | ColumnatmTrafficDescrRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.42.1.2.1.6 | TableatmVplTable | not-accessible | current | The Virtual Path Link (VPL) table. A bi-directional VPL is modeled as one entry in this table. |
| 1.3.6.1.4.1.42.1.2.1.6.1 | RowatmVplEntry | not-accessible | current | An entry in the VPL table. This entry is used to model a bi-directional VPL. To create a VPL at an ATM interface, either of the following procedures are used: … |
| 1.3.6.1.4.1.42.1.2.1.6.1.1 | ColumnatmVplVpi | not-accessible | current | The VPI value of the VPL. Note that the VPI=0 is not used for a VPL not associated with a VCL. The maximum VPI value cannot exceed the value allowable by the a… |
| 1.3.6.1.4.1.42.1.2.1.6.1.2 | ColumnatmVplAdminStatus | read-create | current | This object is implemented only for a VPL which terminates a VPC (i.e., one which is NOT cross-connected to other VPLs). Its value specifies the desired admini… |
| 1.3.6.1.4.1.42.1.2.1.6.1.3 | ColumnatmVplOperStatus | read-only | current | This object indicates the current operational status of the VPL. The up and down states indicate that the VPL is currently operational, or not operational, res… |
| 1.3.6.1.4.1.42.1.2.1.6.1.4 | ColumnatmVplLastChange | read-only | current | The value of MIB II's sysUpTime object at the time this VPL entered its current operational state. If the current state was entered prior to the last re-initia… |
| 1.3.6.1.4.1.42.1.2.1.6.1.5 | ColumnatmVplReceiveTrafficDescrIndex | read-create | current | The value of this object identifies the row in the atmTrafficDescrParamTable which applies to the receive direction of the VPL. |
| 1.3.6.1.4.1.42.1.2.1.6.1.6 | ColumnatmVplTransmitTrafficDescrIndex | read-create | current | The value of this object identifies the row in the atmTrafficDescrParamTable which applies to the transmit direction of the VPL. |
| 1.3.6.1.4.1.42.1.2.1.6.1.7 | ColumnatmVplCrossConnectIdentifier | read-only | current | This object is implemented only for a VPL which is cross-connected to other VPLs that belong to the same VPC. All such associated VPLs have the same value of t… |
| 1.3.6.1.4.1.42.1.2.1.6.1.8 | ColumnatmVplRowStatus | read-create | current | This object is used to create, delete or modify a row in this table. To create a new VCL, this object is initially set to 'createAndWait' or 'createAndGo'. Thi… |
| 1.3.6.1.4.1.42.1.2.1.7 | TableatmVclTable | not-accessible | current | The Virtual Channel Link (VCL) table. A bi-directional VCL is modeled as one entry in this table. |
| 1.3.6.1.4.1.42.1.2.1.7.1 | RowatmVclEntry | not-accessible | current | An entry in the VCL table. This entry is used to model a bi-directional VCL. To create a VCL at an ATM interface, either of the following procedures are used: … |
| 1.3.6.1.4.1.42.1.2.1.7.1.1 | ColumnatmVclVpi | not-accessible | current | The VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the atmInterfaceMaxVpiBits. |
| 1.3.6.1.4.1.42.1.2.1.7.1.2 | ColumnatmVclVci | not-accessible | current | The VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the atmInterfaceMaxVciBits. |
| 1.3.6.1.4.1.42.1.2.1.7.1.3 | ColumnatmVclAdminStatus | read-create | current | This object is implemented only for a VCL which terminates a VCC (i.e., one which is NOT cross-connected to other VCLs). Its value specifies the desired admini… |
| 1.3.6.1.4.1.42.1.2.1.7.1.4 | ColumnatmVclOperStatus | read-only | current | This object indicates the current operational status of the VCL. The up and down states indicate that the VCL is currently operational, or not operational, res… |
| 1.3.6.1.4.1.42.1.2.1.7.1.5 | ColumnatmVclLastChange | read-only | current | The value of MIB II's sysUpTime object at the time this VCL entered its current operational state. If the current state was entered prior to the last re-initia… |
| 1.3.6.1.4.1.42.1.2.1.7.1.6 | ColumnatmVclReceiveTrafficDescrIndex | read-create | current | The value of this object identifies the row in the ATM Traffic Descriptor Table which applies to the receive direction of this VCL. |
| 1.3.6.1.4.1.42.1.2.1.7.1.7 | ColumnatmVclTransmitTrafficDescrIndex | read-create | current | The value of this object identifies the row of the ATM Traffic Descriptor Table which applies to the transmit direction of this VCL. |
| 1.3.6.1.4.1.42.1.2.1.7.1.8 | ColumnatmVccAalType | read-create | current | An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL is in use. The type of AAL used on this VCC. The AAL typ… |
| 1.3.6.1.4.1.42.1.2.1.7.1.9 | ColumnatmVccAal5CpcsTransmitSduSize | read-create | current | An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The maximum AAL5 CPCS SDU size in octets tha… |
| 1.3.6.1.4.1.42.1.2.1.7.1.10 | ColumnatmVccAal5CpcsReceiveSduSize | read-create | current | An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The maximum AAL5 CPCS SDU size in octets tha… |
| 1.3.6.1.4.1.42.1.2.1.7.1.11 | ColumnatmVccAal5EncapsType | read-create | current | An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The type of data encapsulation used over the… |
| 1.3.6.1.4.1.42.1.2.1.7.1.12 | ColumnatmVclCrossConnectIdentifier | read-only | current | This object is implemented only for a VCL which is cross-connected to other VCLs that belong to the same VCC. All such associated VCLs have the same value of t… |
| 1.3.6.1.4.1.42.1.2.1.7.1.13 | ColumnatmVclRowStatus | read-create | current | This object is used to create, delete or modify a row in this table. To create a new VCL, this object is initially set to 'createAndWait' or 'createAndGo'. Thi… |
| 1.3.6.1.4.1.42.1.2.1.8 | ScalaratmVpCrossConnectIndexNext | read-only | current | This object contains an appropriate value to be used for atmVpCrossConnectIndex when creating entries in the atmVpCrossConnectTable. The value 0 indicates that… |
| 1.3.6.1.4.1.42.1.2.1.9 | TableatmVpCrossConnectTable | not-accessible | current | The ATM VP Cross Connect table. A bi- directional VP cross-connect which cross-connects two VPLs is modeled as one entry in this table. |
| 1.3.6.1.4.1.42.1.2.1.9.1 | RowatmVpCrossConnectEntry | not-accessible | current | An entry in the ATM VP Cross Connect table. This entry is used to model a bi-directional ATM VP cross-connect which cross-connects two VPLs. Step-wise Procedur… |
| 1.3.6.1.4.1.42.1.2.1.9.1.1 | ColumnatmVpCrossConnectIndex | not-accessible | current | A unique value to identify this VP cross-connect. |
| 1.3.6.1.4.1.42.1.2.1.9.1.2 | ColumnatmVpCrossConnectLowIfIndex | not-accessible | current | The value of this object is equal to MIB II's ifIndex value of the ATM interface port for this VP cross-connect. The term low implies that this ATM interface h… |
| 1.3.6.1.4.1.42.1.2.1.9.1.3 | ColumnatmVpCrossConnectLowVpi | not-accessible | current | The value of this object is equal to the VPI value at the ATM interface associated with the VP cross-connect that is identified by atmVpCrossConnectLowIfIndex.… |
| 1.3.6.1.4.1.42.1.2.1.9.1.4 | ColumnatmVpCrossConnectHighIfIndex | not-accessible | current | The value of this object is equal to MIB II's ifIndex value of the ATM interface port for this VP cross-connect. The term high implies that this ATM interface … |
| 1.3.6.1.4.1.42.1.2.1.9.1.5 | ColumnatmVpCrossConnectHighVpi | not-accessible | current | The value of this object is equal to the VPI value at the ATM interface associated with the VP cross-connect that is identified by atmVpCrossConnectHighIfIndex… |
| 1.3.6.1.4.1.42.1.2.1.9.1.6 | ColumnatmVpCrossConnectAdminStatus | read-create | current | The value of this object identifies the desired administrative status of this bi-directional VP cross-connect. The up and down states indicate that the traffic… |
| 1.3.6.1.4.1.42.1.2.1.9.1.7 | ColumnatmVpCrossConnectL2HOperStatus | read-only | current | The value of this object identifies the current operational status of the VP cross-connect in one direction; (i.e., from the low to high direction). The up and… |
| 1.3.6.1.4.1.42.1.2.1.9.1.8 | ColumnatmVpCrossConnectH2LOperStatus | read-only | current | The value of this object identifies the current operational status of the VP cross-connect in one direction; (i.e., from the high to low direction). The up and… |
| 1.3.6.1.4.1.42.1.2.1.9.1.9 | ColumnatmVpCrossConnectL2HLastChange | read-only | current | The value of MIB II's sysUpTime object at the time this VP cross-connect entered its current operational state in the low to high direction. If the current sta… |
| 1.3.6.1.4.1.42.1.2.1.9.1.10 | ColumnatmVpCrossConnectH2LLastChange | read-only | current | The value of MIB II's sysUpTime object at the time this VP cross-connect entered its current operational state in the high to low direction. If the current sta… |
| 1.3.6.1.4.1.42.1.2.1.9.1.11 | ColumnatmVpCrossConnectRowStatus | read-create | current | The status of this entry in the atmVpCrossConnectTable. This object is used to create a cross-connect for cross-connecting VPLs which are created using the atm… |
| 1.3.6.1.4.1.42.1.2.1.10 | ScalaratmVcCrossConnectIndexNext | read-only | current | This object contains an appropriate value to be used for atmVcCrossConnectIndex when creating entries in the atmVcCrossConnectTable. The value 0 indicates that… |
| 1.3.6.1.4.1.42.1.2.1.11 | TableatmVcCrossConnectTable | not-accessible | current | The ATM VC Cross Connect table. A bi- directional VC cross-connect which cross-connects two end points (i.e., VCLs) is modeled as one entry in this table. |
| 1.3.6.1.4.1.42.1.2.1.11.1 | RowatmVcCrossConnectEntry | not-accessible | current | An entry in the ATM VC Cross Connect table. This entry is used to model a bi-directional ATM VC cross-connect cross-connecting two end points. Step-wise Proced… |
| 1.3.6.1.4.1.42.1.2.1.11.1.1 | ColumnatmVcCrossConnectIndex | not-accessible | current | A unique value to identify this VC cross-connect. |
| 1.3.6.1.4.1.42.1.2.1.11.1.2 | ColumnatmVcCrossConnectLowIfIndex | not-accessible | current | The value of this object is equal to MIB II's ifIndex value of the ATM interface port for this VC cross-connect. The term low implies that this ATM interface h… |
| 1.3.6.1.4.1.42.1.2.1.11.1.3 | ColumnatmVcCrossConnectLowVpi | not-accessible | current | The value of this object is equal to the VPI value at the ATM interface associated with the VC cross-connect that is identified by atmVcCrossConnectLowIfIndex.… |
| 1.3.6.1.4.1.42.1.2.1.11.1.4 | ColumnatmVcCrossConnectLowVci | not-accessible | current | The value of this object is equal to the VCI value at the ATM interface associated with this VC cross-connect that is identified by atmVcCrossConnectLowIfIndex… |
| 1.3.6.1.4.1.42.1.2.1.11.1.5 | ColumnatmVcCrossConnectHighIfIndex | not-accessible | current | The value of this object is equal to MIB II's ifIndex value for the ATM interface port for this VC cross-connect. The term high implies that this VC cross-conn… |
| 1.3.6.1.4.1.42.1.2.1.11.1.6 | ColumnatmVcCrossConnectHighVpi | not-accessible | current | The value of this object is equal to the VPI value at the ATM interface associated with the VC cross-connect that is identified by atmVcCrossConnectHighIfIndex… |
| 1.3.6.1.4.1.42.1.2.1.11.1.7 | ColumnatmVcCrossConnectHighVci | not-accessible | current | The value of this object is equal to the VCI value at the ATM interface associated with the VC cross-connect that is identified by atmVcCrossConnectHighIfIndex… |
| 1.3.6.1.4.1.42.1.2.1.11.1.8 | ColumnatmVcCrossConnectAdminStatus | read-create | current | The value of this object identifies the desired administrative status of this bi-directional VC cross-connect. The up and down states indicate that the traffic… |
| 1.3.6.1.4.1.42.1.2.1.11.1.9 | ColumnatmVcCrossConnectL2HOperStatus | read-only | current | The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the low to high direction). The up and… |
| 1.3.6.1.4.1.42.1.2.1.11.1.10 | ColumnatmVcCrossConnectH2LOperStatus | read-only | current | The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the high to low direction). The up and… |
| 1.3.6.1.4.1.42.1.2.1.11.1.11 | ColumnatmVcCrossConnectL2HLastChange | read-only | current | The value of MIB II's sysUpTime object at the time this VC cross-connect entered its current operational state in low to high direction. If the current state w… |
| 1.3.6.1.4.1.42.1.2.1.11.1.12 | ColumnatmVcCrossConnectH2LLastChange | read-only | current | The value of MIB II's sysUpTime object at the time this VC cross-connect entered its current operational state in high to low direction. If the current state w… |
| 1.3.6.1.4.1.42.1.2.1.11.1.13 | ColumnatmVcCrossConnectRowStatus | read-create | current | The status of this entry in the atmVcCrossConnectTable. This object is used to create a new cross-connect for cross-connecting VCLs which are created using the… |
| 1.3.6.1.4.1.42.1.2.1.12 | Tableaal5VccTable | not-accessible | current | This table contains AAL5 VCC performance parameters. |
| 1.3.6.1.4.1.42.1.2.1.12.1 | Rowaal5VccEntry | not-accessible | current | This list contains the AAL5 VCC performance parameters. |
| 1.3.6.1.4.1.42.1.2.1.12.1.1 | Columnaal5VccVpi | not-accessible | current | The VPI value of the AAL5 VCC at the interface identified by the ifIndex. |
| 1.3.6.1.4.1.42.1.2.1.12.1.2 | Columnaal5VccVci | not-accessible | current | The VCI value of the AAL5 VCC at the interface identified by the ifIndex. |
| 1.3.6.1.4.1.42.1.2.1.12.1.3 | Columnaal5VccCrcErrors | read-only | current | The number of AAL5 CPCS PDUs received with CRC-32 errors on this AAL5 VCC at the interface associated with an AAL5 entity. |
| 1.3.6.1.4.1.42.1.2.1.12.1.4 | Columnaal5VccSarTimeOuts | read-only | current | The number of partially re-assembled AAL5 CPCS PDUs which were discarded on this AAL5 VCC at the interface associated with an AAL5 entity because they were not… |
| 1.3.6.1.4.1.42.1.2.1.12.1.5 | Columnaal5VccOverSizedSDUs | read-only | current | The number of AAL5 CPCS PDUs discarded on this AAL5 VCC at the interface associated with an AAL5 entity because the AAL5 SDUs were too large. |
| 1.3.6.1.4.1.42.1.2.2 | NodeatmMIBConformance | |||
| 1.3.6.1.4.1.42.1.2.2.1 | NodeatmMIBGroups | |||
| 1.3.6.1.4.1.42.1.2.2.1.1 | GroupatmInterfaceConfGroup | current | A collection of objects providing configuration information about an ATM interface. | |
| 1.3.6.1.4.1.42.1.2.2.1.2 | GroupatmTrafficDescrGroup | current | A collection of objects providing information about ATM traffic descriptor type and the associated parameters. | |
| 1.3.6.1.4.1.42.1.2.2.1.3 | GroupatmInterfaceDs3PlcpGroup | current | A collection of objects providing information about DS3 PLCP layer at an ATM interface. | |
| 1.3.6.1.4.1.42.1.2.2.1.4 | GroupatmInterfaceTCGroup | current | A collection of objects providing information about TC sublayer at an ATM interface. | |
| 1.3.6.1.4.1.42.1.2.2.1.5 | GroupatmVpcTerminationGroup | current | A collection of objects providing information about a VPL at an ATM interface which terminates a VPC (i.e., one which is NOT cross-connected to other VPLs). | |
| 1.3.6.1.4.1.42.1.2.2.1.6 | GroupatmVccTerminationGroup | current | A collection of objects providing information about a VCL at an ATM interface which terminates a VCC (i.e., one which is NOT cross-connected to other VCLs). | |
| 1.3.6.1.4.1.42.1.2.2.1.7 | GroupatmVpCrossConnectGroup | current | A collection of objects providing information about a VP cross-connect and the associated VPLs that are cross-connected together. | |
| 1.3.6.1.4.1.42.1.2.2.1.8 | GroupatmVcCrossConnectGroup | current | A collection of objects providing information about a VC cross-connect and the associated VCLs that are cross-connected together. | |
| 1.3.6.1.4.1.42.1.2.2.1.9 | Groupaal5VccGroup | current | A collection of objects providing AAL5 configuration and performance statistics of a VCC. | |
| 1.3.6.1.4.1.42.1.2.2.2 | NodeatmMIBCompliances | |||
| 1.3.6.1.4.1.42.1.2.2.2.1 | ComplianceatmMIBCompliance | read-only | current | The compliance statement for SNMP entities including networks which have ATM and AAL5 interfaces. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtmTrafficDescrParamIndex | Integer32 | current | The value of this object identifies the row in the atmTrafficDescrParamTable. |
| IfIndex | Integer32 | current | The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object, defined in RFC 1213, … |