MIB Viewer

LENOVO-GbTOR-G7052-MIB

3087 objects
MIB for Lenovo RackSwitch G7052 All Rights reserved DEVICE VERSION: 8.4.12.0
Imported Objects
BRIDGE-MIBBridgeId dot1dBasePort dot1dBasePortEntry dot1dBridge dot1dTp dot1dTpPort
IF-MIBInterfaceIndex InterfaceIndexOrZero
INET-ADDRESS-MIBInetAddress InetAddressIPv6 InetAddressType
P-BRIDGE-MIBEnabledStatus
Q-BRIDGE-MIBPortList
RFC1155-SMIenterprises
RFC1213-MIBifIndex sysContact sysLocation sysName
SNMP-FRAMEWORK-MIBSnmpAdminString SnmpEngineID SnmpMessageProcessingModel SnmpSecurityLevel SnmpSecurityModel
SNMP-USER-BASED-SM-MIBusmNoAuthProtocol usmNoPrivProtocol
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Counter64 Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCAutonomousType DisplayString MacAddress PhysAddress RowPointer RowStatus StorageType TAddress TDomain TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.20301Nodeibmnetwork
1.3.6.1.4.1.20301.1Noderegistration
1.3.6.1.4.1.20301.1.7Nodeibm-switch
1.3.6.1.4.1.20301.1.7.18Nodeg7052
1.3.6.1.4.1.20301.2Nodeprivate-mibs
1.3.6.1.4.1.20301.2.7Nodeibm-switch-mgmt
1.3.6.1.4.1.20301.2.7.18Nodeg7052-mgmt
1.3.6.1.4.1.20301.2.7.18.1Nodeagent
1.3.6.1.4.1.20301.2.7.18.1.1NodeagentConfig
1.3.6.1.4.1.20301.2.7.18.1.1.1NodeagSystem
1.3.6.1.4.1.20301.2.7.18.1.1.1.2ScalaragApplyConfigurationread-writecurrentThis is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply …
1.3.6.1.4.1.20301.2.7.18.1.1.1.3ScalaragSavePendingread-onlycurrentThis object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash.
1.3.6.1.4.1.20301.2.7.18.1.1.1.4ScalaragSaveConfigurationread-writecurrentThis is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to …
1.3.6.1.4.1.20301.2.7.18.1.1.1.5ScalaragRevertread-writecurrentThis is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied changes will be reverted. Thi…
1.3.6.1.4.1.20301.2.7.18.1.1.1.6ScalaragRevertApplyread-writecurrentThis is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes…
1.3.6.1.4.1.20301.2.7.18.1.1.1.7ScalaragResetread-writecurrentThis is an action object to reboot the agent. other(1) is returned always when read.
1.3.6.1.4.1.20301.2.7.18.1.1.1.8ScalaragConfigForNxtResetread-writecurrentThe configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup con…
1.3.6.1.4.1.20301.2.7.18.1.1.1.9ScalaragImageForNxtResetread-writecurrentThe software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2
1.3.6.1.4.1.20301.2.7.18.1.1.1.10ScalaragSoftwareVersionread-onlycurrentThe version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if …
1.3.6.1.4.1.20301.2.7.18.1.1.1.11ScalaragBootVerread-onlycurrentThe version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available.
1.3.6.1.4.1.20301.2.7.18.1.1.1.12ScalaragImage1Verread-onlycurrentThe version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available o…
1.3.6.1.4.1.20301.2.7.18.1.1.1.13ScalaragImage2Verread-onlycurrentThe version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available o…
1.3.6.1.4.1.20301.2.7.18.1.1.1.14ScalaragRtcDateread-writecurrentThe date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available.
1.3.6.1.4.1.20301.2.7.18.1.1.1.15ScalaragRtcTimeread-writecurrentThe time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available.
1.3.6.1.4.1.20301.2.7.18.1.1.1.16ScalaragLastSetErrorReasonread-onlycurrentThe error reason of the last SET failure.
1.3.6.1.4.1.20301.2.7.18.1.1.1.17ScalaragCurCfgHttpServerPortread-onlycurrentThe TCP port number that the HTTP server is listening to in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.1.18ScalaragNewCfgHttpServerPortread-writecurrentThe TCP port number that the HTTP server is listening to in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.1.19ScalaragCurCfgLoginBannerread-onlycurrentThe user defined login banner.
1.3.6.1.4.1.20301.2.7.18.1.1.1.20ScalaragNewCfgLoginBannerread-writecurrentThe user defined login banner.
1.3.6.1.4.1.20301.2.7.18.1.1.1.23ScalaragCurCfgConsoleread-onlycurrentEnable or disable console output of syslog messages.
1.3.6.1.4.1.20301.2.7.18.1.1.1.24ScalaragNewCfgConsoleread-writecurrentEnable or disable console output of syslog messages.
1.3.6.1.4.1.20301.2.7.18.1.1.1.31ScalaragSlotNumberread-onlycurrentIdentifies the slot in which this switch is installed. If the agent implementing this MIB is not a blade in a chassis this value has no meaning.
1.3.6.1.4.1.20301.2.7.18.1.1.1.32ScalaragCurCfgSnmpTimeoutread-onlycurrentOnce SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be fr…
1.3.6.1.4.1.20301.2.7.18.1.1.1.33ScalaragNewCfgSnmpTimeoutread-writecurrentOnce SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be fr…
1.3.6.1.4.1.20301.2.7.18.1.1.1.34ScalaragCurCfgTelnetServerPortread-onlycurrentThe TCP port number that the telnet server listens for telnet sessions.
1.3.6.1.4.1.20301.2.7.18.1.1.1.35ScalaragNewCfgTelnetServerPortread-writecurrentThe TCP port number that the telnet server listens for telnet sessions.
1.3.6.1.4.1.20301.2.7.18.1.1.1.36ScalaragClearFlashDumpread-writecurrentThis is an action object to clear the FLASH dump. ok(1) is returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.1.1.1.39ScalaragCurCfgTrapSrcIfread-onlycurrentThe SNMP trap source interface number.
1.3.6.1.4.1.20301.2.7.18.1.1.1.40ScalaragNewCfgTrapSrcIfread-writecurrentThe SNMP trap source interface number.
1.3.6.1.4.1.20301.2.7.18.1.1.1.49ScalaragCurCfgHttpsServerPortread-onlycurrentThe TCP port number that the HTTPS server is listening to in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.1.50ScalaragNewCfgHttpsServerPortread-writecurrentThe TCP port number that the HTTPS server is listening to in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.1.51ScalaragCurCfgTftpServerPortread-onlycurrentThe TCP port number that the TFTP server is listening to in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.1.52ScalaragNewCfgTftpServerPortread-writecurrentThe TCP port number that the TFTP server is listening to in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.1.53ScalaragRackIdread-onlycurrentThe rack unique identifier.
1.3.6.1.4.1.20301.2.7.18.1.1.1.54ScalaragChassisread-onlycurrentChassis serial number.
1.3.6.1.4.1.20301.2.7.18.1.1.1.55ScalaragCurTimeZoneread-onlycurrentThe time zone. Note: Locations are alphabetically ordered and the corresponding code is not reflected in CLI.
1.3.6.1.4.1.20301.2.7.18.1.1.1.56ScalaragNewTimeZoneread-writecurrentThe time zone. Note: Locations are alphabetically ordered and the corresponding code is not reflected in CLI.
1.3.6.1.4.1.20301.2.7.18.1.1.1.57ScalaragCurCfgIdleCLITimeoutread-onlycurrentSet idle CLI sessions timeout.
1.3.6.1.4.1.20301.2.7.18.1.1.1.58ScalaragNewCfgIdleCLITimeoutread-writecurrentSet idle CLI sessions timeout.
1.3.6.1.4.1.20301.2.7.18.1.1.1.62ScalaragCurCfgHttpsServerAccessread-onlycurrentCurrent HTTPS server access state.
1.3.6.1.4.1.20301.2.7.18.1.1.1.63ScalaragNewCfgHttpsServerAccessread-writecurrentEnable/disable HTTPS server access.
1.3.6.1.4.1.20301.2.7.18.1.1.1.66ScalaragCurHttpAccesread-onlycurrentCurrent HTTP server access state.
1.3.6.1.4.1.20301.2.7.18.1.1.1.67ScalaragNewHttpAccesread-writecurrentNew HTTP server access state.
1.3.6.1.4.1.20301.2.7.18.1.1.1.68ScalaragCurCfgDhcpread-onlycurrentEnable or disable the use of DHCP, as currently configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.1.69ScalaragNewCfgDhcpread-writecurrentEnable or disable the use of DHCP, in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.1.70ScalaragCurCfgRemindersread-onlycurrentCurrent status of reminders feature.
1.3.6.1.4.1.20301.2.7.18.1.1.1.71ScalaragNewCfgRemindersread-writecurrentEnable or disable reminders feature.
1.3.6.1.4.1.20301.2.7.18.1.1.1.72ScalaragCurCfgHpromptread-onlycurrentCurrent status of hprompt.
1.3.6.1.4.1.20301.2.7.18.1.1.1.73ScalaragNewCfgHpromptread-writecurrentNew status of hprompt.
1.3.6.1.4.1.20301.2.7.18.1.1.1.74ScalaragCurCfgUserBBIread-onlycurrentCurrent status of user configuration from BBI.
1.3.6.1.4.1.20301.2.7.18.1.1.1.75ScalaragNewCfgUserBBIread-writecurrentNew status of user configuration from BBI.
1.3.6.1.4.1.20301.2.7.18.1.1.1.78ScalaragCurCfgLoginNoticeread-onlycurrentThe user defined login notice.
1.3.6.1.4.1.20301.2.7.18.1.1.1.79ScalaragNewCfgLoginNoticeread-writecurrentThe user defined login notice.
1.3.6.1.4.1.20301.2.7.18.1.1.1.98ScalaragCurCfgSysCustomDstStateread-onlycurrentThe current status of Custom DST
1.3.6.1.4.1.20301.2.7.18.1.1.1.99ScalaragNewCfgSysCustomDstStateread-writecurrentEnable/disable Custom DST
1.3.6.1.4.1.20301.2.7.18.1.1.1.100ScalaragCurCfgSysCustomDstStartread-onlycurrentThe current Custom DST start rule
1.3.6.1.4.1.20301.2.7.18.1.1.1.101ScalaragNewCfgSysCustomDstStartread-writecurrentSet Custom DST start rule
1.3.6.1.4.1.20301.2.7.18.1.1.1.102ScalaragCurCfgSysCustomDstEndread-onlycurrentThe current Custom DST end rule
1.3.6.1.4.1.20301.2.7.18.1.1.1.103ScalaragNewCfgSysCustomDstEndread-writecurrentSet Custom DST end rule
1.3.6.1.4.1.20301.2.7.18.1.1.1.104ScalaragHavePanicDumpread-onlycurrentThe presence of a panic dump in the flash memory.
1.3.6.1.4.1.20301.2.7.18.1.1.1.111ScalaragCurCfgResetControlread-onlycurrentCurrent reset control state.
1.3.6.1.4.1.20301.2.7.18.1.1.1.112ScalaragNewCfgResetControlread-writecurrentEnable/disable reset control after panic.
1.3.6.1.4.1.20301.2.7.18.1.1.1.113ScalaragCurCfgSysDlightread-onlycurrentCurrent daylight savings time status.
1.3.6.1.4.1.20301.2.7.18.1.1.1.114ScalaragNewCfgSysDlightread-writecurrentEnable/disable daylight savings time.
1.3.6.1.4.1.20301.2.7.18.1.1.1.115ScalaragCurCfgErrDisableRecoveryread-onlycurrentThis object indicates whether the system will automatically re-enable an error-disabled port after the time interval indicated by agCurCfgErrDisableTimeout has…
1.3.6.1.4.1.20301.2.7.18.1.1.1.116ScalaragNewCfgErrDisableRecoveryread-writecurrentThis object specifies whether the system should automatically re-enable an error-disabled port. Use this object to change the global setting of the error-disab…
1.3.6.1.4.1.20301.2.7.18.1.1.1.117ScalaragCurCfgErrDisableTimeoutread-onlycurrentThis object indicates the time, in seconds, that the system will wait before it automatically re-enables any port that is in error-disabled state.
1.3.6.1.4.1.20301.2.7.18.1.1.1.118ScalaragNewCfgErrDisableTimeoutread-writecurrentThis object specifies the time, in seconds, that the system should wait before it automatically re-enables a port that is in error-disabled state. Use this obj…
1.3.6.1.4.1.20301.2.7.18.1.1.1.119ScalaragCurCfgTelnetAccessread-onlycurrentCurrent telnet access state.
1.3.6.1.4.1.20301.2.7.18.1.1.1.120ScalaragNewCfgTelnetAccessread-writecurrentEnable/disable telnet access.
1.3.6.1.4.1.20301.2.7.18.1.1.1.133ScalaragNetbootread-writecurrentEna/dis loading of config over n/w during bootup
1.3.6.1.4.1.20301.2.7.18.1.1.1.134ScalaragNetbootTftpAddrread-writecurrentTftp server address from where config file needs to be downloaded
1.3.6.1.4.1.20301.2.7.18.1.1.1.135ScalaragNetbootCfgFileread-writecurrentConfig file location on tftp server
1.3.6.1.4.1.20301.2.7.18.1.1.1.136ScalaragCurCfgLinkscanModeread-onlycurrentSet linkscan mode
1.3.6.1.4.1.20301.2.7.18.1.1.1.137ScalaragNewCfgLinkscanModeread-writecurrentSet linkscan mode
1.3.6.1.4.1.20301.2.7.18.1.1.1.138ScalaragUSBbootread-writecurrentEna/dis USB Boot capability
1.3.6.1.4.1.20301.2.7.18.1.1.1.139ScalaragCurServiceLEDread-onlycurrentEna/dis Service Required LED
1.3.6.1.4.1.20301.2.7.18.1.1.1.140ScalaragNewServiceLEDread-writecurrentEna/dis Service Required LED
1.3.6.1.4.1.20301.2.7.18.1.1.1.141ScalaragUSBejectread-writecurrentEject USB - eject(1) Get current USB state: usbready(2) - USB mounted nousb(3) - no USB mounted
1.3.6.1.4.1.20301.2.7.18.1.1.1.142ScalaragCurRFC4741NetconfAccessread-onlycurrentCurrent NETCONF server access state.
1.3.6.1.4.1.20301.2.7.18.1.1.1.143ScalaragNewRFC4741NetconfAccessread-writecurrentEnable/disable NETCONF server access state.
1.3.6.1.4.1.20301.2.7.18.1.1.1.144ScalaragCurRFC4741NetconfSessionTimeoutread-onlycurrentOnce NETCONF session setup, NETCONF server will allocate resource for this session. agCurRFC4741NetconfSessionTimeout indicates the number of seconds before th…
1.3.6.1.4.1.20301.2.7.18.1.1.1.145ScalaragNewRFC4741NetconfSessionTimeoutread-writecurrentOnce NETCONF session setup, NETCONF server will allocate resource for this session. agNewRFC4741NetconfSessionTimeout specifies the number of seconds before th…
1.3.6.1.4.1.20301.2.7.18.1.1.1.146ScalaragCurRFC4741NetconfSshAccessread-onlycurrentCurrent NETCONF server over SSH access state.
1.3.6.1.4.1.20301.2.7.18.1.1.1.147ScalaragNewRFC4741NetconfSshAccessread-writecurrentEnable/disable NETCONF server over SSH access state.
1.3.6.1.4.1.20301.2.7.18.1.1.1.148ScalaragCurRFC4741NetconfSshPortread-onlycurrentThe TCP port number that the NETCONF server over SSH is listening to in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.1.149ScalaragNewRFC4741NetconfSshPortread-writecurrentThe TCP port number that the NETCONF server over SSH is listening to in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.1.158ScalaragCurCfgLFDStatusread-onlycurrentThis object indicates whether the system will put any port in an error-disabled state due to excessive link flaps. A port will be put in an error-disabled stat…
1.3.6.1.4.1.20301.2.7.18.1.1.1.159ScalaragNewCfgLFDStatusread-writecurrentThis object indicates whether the system should put any port in an error-disabled state due to excessive link flaps. Use this object to change the global setti…
1.3.6.1.4.1.20301.2.7.18.1.1.1.160ScalaragCurCfgLFDFlapsread-onlycurrentThis object indicates the maximum number of flaps allowed in a time period set by agCurCfgLFDTime.
1.3.6.1.4.1.20301.2.7.18.1.1.1.161ScalaragNewCfgLFDFlapsread-writecurrentThis object specifies the maximum number of flaps that should be allowed in a time period. Use this object to change the global maximum number of flaps allowed…
1.3.6.1.4.1.20301.2.7.18.1.1.1.162ScalaragCurCfgLFDTimeread-onlycurrentThis object indicates the length of time period in seconds during which link flaps are counted.
1.3.6.1.4.1.20301.2.7.18.1.1.1.163ScalaragNewCfgLFDTimeread-writecurrentThis object specifies the length of time period in seconds that should be used to count link flaps.
1.3.6.1.4.1.20301.2.7.18.1.1.1.167ScalaragCurCfgDefipDataread-onlycurrentEnable or disable the use of default IP address on data interface, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.1.168ScalaragNewCfgDefipDataread-writecurrentEnable or disable the use of default IP address on data interface, in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.1.169ScalaragCurCfgDefipMgmtread-onlycurrentEnable or disable the use of default IP address on mgmt interface, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.1.170ScalaragNewCfgDefipMgmtread-writecurrentEnable or disable the use of default IP address on mgmt interface, in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.1.177ScalaragNewSecurityModeread-writecurrentThis is an action object to change switch security mode. There are thtree security modes for Lenovo switch: strict mode, compatibility mode and strict mode wit…
1.3.6.1.4.1.20301.2.7.18.1.1.1.178ScalaragNewCfgSslVersionLevelread-writecurrentNew status of SSL Server Minimum Acceptable Protocol Version.
1.3.6.1.4.1.20301.2.7.18.1.1.1.179ScalaragCurCfgSslVersionLevelread-onlycurrentCurrent status of SSL Server Minimum Acceptable Protocol Version.
1.3.6.1.4.1.20301.2.7.18.1.1.1.180ScalaragCurSecurityModeread-onlycurrentThis is an action object to change switch security mode. There are thtree security modes for Lenovo switch: strict mode, compatibility mode and strict mode wit…
1.3.6.1.4.1.20301.2.7.18.1.1.1.184TableagCurCfgTrapHostTablenot-accessiblecurrentThe table of current trap hosts configure.
1.3.6.1.4.1.20301.2.7.18.1.1.1.184.1RowagCurCfgTrapHostEntrynot-accessiblecurrentA trap host configuration on the switch.
1.3.6.1.4.1.20301.2.7.18.1.1.1.184.1.1ColumnagCurCfgTrapHostIndexread-onlycurrentThe trap host index. Valid range is 1-16
1.3.6.1.4.1.20301.2.7.18.1.1.1.184.1.2ColumnagCurCfgTrapHostAddressread-onlycurrentThe trap host address.
1.3.6.1.4.1.20301.2.7.18.1.1.1.184.1.3ColumnagCurCfgTrapHostCommStrread-onlycurrentThe trap host community string.
1.3.6.1.4.1.20301.2.7.18.1.1.1.185TableagNewCfgTrapHostTablenot-accessiblecurrentThe table for trap host definitions in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.1.185.1RowagNewCfgTrapHostEntrynot-accessiblecurrentA row in the trap host definition table
1.3.6.1.4.1.20301.2.7.18.1.1.1.185.1.1ColumnagNewCfgTrapHostIndexread-onlycurrentThe trap host index. Valid range is 1-16
1.3.6.1.4.1.20301.2.7.18.1.1.1.185.1.2ColumnagNewCfgTrapHostAddressread-createcurrentThe trap host address in the new configuration block. Setting IPv6 value is not supported in realease 7.9.x.
1.3.6.1.4.1.20301.2.7.18.1.1.1.185.1.3ColumnagNewCfgTrapHostCommStrread-createcurrentThe trap host community string in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.1.185.1.4ColumnagNewCfgTrapHostDeleteread-createcurrentBy setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.20301.2.7.18.1.1.1.187ScalaragCurSysHostCertread-onlycurrentCurrent Host Certificate
1.3.6.1.4.1.20301.2.7.18.1.1.1.191ScalaragNewSecurityPolicyread-writecurrentThe security policy that will take effect after the next boot.
1.3.6.1.4.1.20301.2.7.18.1.1.1.192ScalaragCurSecurityPolicyread-onlycurrentThe current security policy.
1.3.6.1.4.1.20301.2.7.18.1.1.1.193ScalaragSFTPEnableread-writecurrentIn secure mode enable or disable sftp transfers.
1.3.6.1.4.1.20301.2.7.18.1.1.2NodeagPortConfig
1.3.6.1.4.1.20301.2.7.18.1.1.2.1ScalaragPortTableMaxEntread-onlycurrentThe maximum number of rows in the port configuration host table.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2TableagPortCurCfgTablenot-accessiblecurrentThe table of port configuration in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1RowagPortCurCfgTableEntrynot-accessiblecurrentA row in the port table in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.1ColumnagPortCurCfgIndxread-onlycurrentThe index of the row in port configurations table.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.2ColumnagPortCurCfgStateread-onlycurrentThis is the state of the port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.3ColumnagPortCurCfgVlanTagread-onlycurrentThis is VLAN tag state of the port
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.5ColumnagPortCurCfgRmonread-onlycurrentThis object is used to turn RMON on or off on the port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.6ColumnagPortCurCfgPVIDread-onlycurrentThe default VLAN ID for the port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.11ColumnagPortCurCfgGigEthAutoNegread-onlycurrentThis object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.12ColumnagPortCurCfgGigEthFctlread-onlycurrentThis object is used to select port flow control for gigabit Ethernet connection.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.13ColumnagPortCurCfgPortNameread-onlycurrentThe switch port name.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.16ColumnagPortCurCfgLinkTrapread-onlycurrentIndicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which d…
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.21ColumnagPortCurCfgGigEthSpeedread-onlycurrentSelects the port speed for Gigabit Ethernet connection.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.22ColumnagPortCurCfgGigEthModeread-onlycurrentThis object is used to select port mode for Gigabit Ethernet connection.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.23ColumnagPortCurCfgDscpRemarkingread-onlycurrentEnable or disable Dscp remarking for the switch port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.24ColumnagPortCurCfgPortAliasread-onlycurrentThe switch port alias.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.25ColumnagPortCurCfgTagPVIDread-onlycurrentThis is PVID tag state of the port
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.26ColumnagPortCurCfgLearningread-onlycurrentEnable or disable L2 (FDB) Learning for the switch port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.27ColumnagPortCurCfgFloodBlockingread-onlycurrentEnable or disable flood blocking for the switch port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.29ColumnagPortCurCfgTyperead-onlycurrentThe switch port type.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.30ColumnagPortCurCfgLinkTyperead-onlycurrentThe type of port connection. (for PVRST only)
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.31ColumnagPortCurCfgEdgeread-onlycurrentThe state of port edge.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.35ColumnagPortCurCfgErrDisableRecoveryread-onlycurrentThis object indicates whether the system will automatically re-enable this port if it becomes error-disabled. This port will be re-enabled after the time inter…
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.37ColumnagPortCurCfgUdldread-onlycurrentEnable or disable UDLD for the switch port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.38ColumnagPortCurCfgUdldModeread-onlycurrentEnable or disable UDLD mode for the switch port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.41ColumnagPortCurCfgBpduGuardread-onlycurrentEnable or disable BPDU guard for the switch port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.42ColumnagPortCurCfgMulticastThresholdread-onlycurrentCurrent status of the port's Multicast Threshold.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.43ColumnagPortCurCfgMulticastThresholdRateread-onlycurrentCurrent port's Multicast Threshold Rate.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.44ColumnagPortCurCfgBroadcastThresholdread-onlycurrentCurrent status of the port's Broadcast Threshold.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.45ColumnagPortCurCfgBroadcastThresholdRateread-onlycurrentCurrent port's Broadcast Threshold Rate.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.46ColumnagPortCurCfgDLFThresholdread-onlycurrentCurrent status of the port's Destination Lookup Fail Threshold.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.47ColumnagPortCurCfgDLFThresholdRateread-onlycurrentCurrent port's Destination Lookup Fail Threshold Rate.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.48ColumnagPortCurCfgMacAddrNotifread-onlycurrentThis is the state of the MAC address notification syslog messages on the port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.49ColumnagPortCurCfgTagiPVIDread-onlycurrentThis is ingress PVID tag state of the port
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.52ColumnagPortCurCfgStpExtGuardread-onlycurrentCurrent state for spanning tree guard type
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.53ColumnagPortCurCfgLFDStatusread-onlycurrentThis object indicates whether the system will put this port in an error-disabled state due to excessive link flaps. A port will be put in an error-disabled sta…
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.61ColumnagPortCurCfgPrivateVlanStatusread-onlycurrentCurrent state of Private VLAN on this port
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.62ColumnagPortCurCfgMappedPrimaryVlansread-onlycurrentPrimary VLAN list mapped to port. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 8 || || || ||___ vlan 7 || |____ vlan 6 || . …
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.63ColumnagPortCurCfgAssociatedSecondaryVlansread-onlycurrentSecondary VLAN list associated to port. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 8 || || || ||___ vlan 7 || |____ vlan 6…
1.3.6.1.4.1.20301.2.7.18.1.1.2.2.1.69ColumnagPortCurCfgSpeed1Gread-onlycurrentLimit the port to 1G speed
1.3.6.1.4.1.20301.2.7.18.1.1.2.3TableagPortNewCfgTablenot-accessiblecurrentThe table of port configuration in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1RowagPortNewCfgTableEntrynot-accessiblecurrentA row in the port configuration table in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.1ColumnagPortNewCfgIndxread-onlycurrentThe index of the row in port configurations table.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.2ColumnagPortNewCfgStateread-writecurrentThis is the state of the port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.3ColumnagPortNewCfgVlanTagread-writecurrentThis is VLAN tag state of the port
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.5ColumnagPortNewCfgRmonread-writecurrentThis object is used to turn RMON on or off on the port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.6ColumnagPortNewCfgPVIDread-writecurrentThe default VLAN ID for the port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.11ColumnagPortNewCfgGigEthAutoNegread-writecurrentThis object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.12ColumnagPortNewCfgGigEthFctlread-writecurrentThis object is used to select port flow control for gigabit Ethernet connection.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.13ColumnagPortNewCfgPortNameread-writecurrentThe switch port name.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.16ColumnagPortNewCfgLinkTrapread-writecurrentIndicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which d…
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.21ColumnagPortNewCfgGigEthSpeedread-writecurrentSelects the port speed for Gigabit Ethernet connection.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.22ColumnagPortNewCfgGigEthModeread-writecurrentThis object is used to select port mode for Gigabit Ethernet connection.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.23ColumnagPortNewCfgDscpRemarkingread-writecurrentEnable or disable Dscp remarking for the switch port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.25ColumnagPortNewCfgTagPVIDread-writecurrentThis is PVID tag state of the port
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.26ColumnagPortNewCfgLearningread-writecurrentEnable or disable L2 (FDB) Learning for the switch port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.27ColumnagPortNewCfgFloodBlockingread-writecurrentEnable or disable flood blocking for the switch port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.29ColumnagPortNewCfgTyperead-onlycurrentThe switch port type.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.30ColumnagPortNewCfgLinkTyperead-createcurrentThe type of port connection. (for PVRST only)
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.31ColumnagPortNewCfgEdgeread-createcurrentThe state of port edge.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.35ColumnagPortNewCfgErrDisableRecoveryread-writecurrentThis object specifies whether the system should automatically re-enable this port when it becomes error-disabled. Use this object to change the port-level sett…
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.37ColumnagPortNewCfgUdldread-writecurrentEnable or disable UDLD for the switch port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.38ColumnagPortNewCfgUdldModeread-writecurrentEnable or disable UDLD mode for the switch port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.41ColumnagPortNewCfgBpduGuardread-writecurrentEnable or disable BPDU guard for the switch port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.42ColumnagPortNewCfgMulticastThresholdread-writecurrentNew status of the port's Multicast Threshold.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.43ColumnagPortNewCfgMulticastThresholdRateread-writecurrentNew port's Multicast Threshold Rate.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.44ColumnagPortNewCfgBroadcastThresholdread-writecurrentNew status of the port's Broadcast Threshold.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.45ColumnagPortNewCfgBroadcastThresholdRateread-writecurrentNew port's Broadcast Threshold Rate.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.46ColumnagPortNewCfgDLFThresholdread-writecurrentNew status of the port's Destination Lookup Fail Threshold.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.47ColumnagPortNewCfgDLFThresholdRateread-writecurrentNew port's Destination Lookup Fail Threshold Rate.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.48ColumnagPortNewCfgMacAddrNotifread-writecurrentEnables or Disables the MAC address notification syslog messages on the port.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.49ColumnagPortNewCfgTagiPVIDread-writecurrentThis is ingress PVID tag state of the port
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.52ColumnagPortNewCfgStpExtGuardread-writecurrentSet spanning tree guard type
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.53ColumnagPortNewCfgLFDStatusread-writecurrentThis object indicates whether the system should put this port in an error-disabled state due to excessive link flaps. Use this object to change the port settin…
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.61ColumnagPortNewCfgPrivateVlanStatusread-writecurrentEnable or disable the Private VLAN on this port
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.62ColumnagPortNewCfgMappedPrimaryVlansread-onlycurrentPrimary VLAN list mapped to port. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 8 || || || ||___ vlan 7 || |____ vlan 6 || . …
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.63ColumnagPortNewCfgAddPrimaryVlanread-writecurrentAdds the port to the specified primary VLAN. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.64ColumnagPortNewCfgDelPrimaryVlanread-writecurrentRemoves the port from the specified primary VLAN. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.65ColumnagPortNewCfgAssociatedSecondaryVlansread-onlycurrentSecondary VLAN list associated to port. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 8 || || || ||___ vlan 7 || |____ vlan 6…
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.66ColumnagPortNewCfgAddSecondaryVlanread-writecurrentAdds the port to the specified secondary VLAN. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.67ColumnagPortNewCfgDelSecondaryVlanread-writecurrentRemoves the port from the secondary VLAN. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.68ColumnagPortNewCfgPortAliasread-onlycurrentThe port alias.
1.3.6.1.4.1.20301.2.7.18.1.1.2.3.1.69ColumnagPortNewCfgSpeed1Gread-writecurrentLimit the port to 1G speed
1.3.6.1.4.1.20301.2.7.18.1.1.3NodeagRadiusConfig
1.3.6.1.4.1.20301.2.7.18.1.1.3.1ScalarradCurCfgPrimaryServerread-onlycurrentThe Hostname of the Primary RADIUS server.
1.3.6.1.4.1.20301.2.7.18.1.1.3.2ScalarradNewCfgPrimaryServerread-writecurrentThe Hostname of the Primary RADIUS server.
1.3.6.1.4.1.20301.2.7.18.1.1.3.3ScalarradCurCfgSecondaryServerread-onlycurrentThe Hostname of the Secondary RADIUS server.
1.3.6.1.4.1.20301.2.7.18.1.1.3.4ScalarradNewCfgSecondaryServerread-writecurrentThe Hostname of the Secondary RADIUS server.
1.3.6.1.4.1.20301.2.7.18.1.1.3.5ScalarradCurCfgPortread-onlycurrentSpecify the RADIUS port number for authentication.
1.3.6.1.4.1.20301.2.7.18.1.1.3.6ScalarradNewCfgPortread-writecurrentSpecify the RADIUS port number for authentication.
1.3.6.1.4.1.20301.2.7.18.1.1.3.7ScalarradCurCfgTimeoutread-onlycurrentThe maximum number of seconds before resending authentication to RADIUS server.
1.3.6.1.4.1.20301.2.7.18.1.1.3.8ScalarradNewCfgTimeoutread-writecurrentThe maximum number of seconds before resending authentication to RADIUS server.
1.3.6.1.4.1.20301.2.7.18.1.1.3.9ScalarradCurCfgRetriesread-onlycurrentNumber of retries to the RADIUS server.
1.3.6.1.4.1.20301.2.7.18.1.1.3.10ScalarradNewCfgRetriesread-writecurrentNumber of retries to the RADIUS server.
1.3.6.1.4.1.20301.2.7.18.1.1.3.11ScalarradCurCfgStateread-onlycurrentEnable or disable RADIUS authentication.
1.3.6.1.4.1.20301.2.7.18.1.1.3.12ScalarradNewCfgStateread-writecurrentEnable or disable RADIUS authentication.
1.3.6.1.4.1.20301.2.7.18.1.1.3.13ScalarradCurCfgAuthenStringread-onlycurrentThe RADIUS authentication string.
1.3.6.1.4.1.20301.2.7.18.1.1.3.14ScalarradNewCfgAuthenStringread-writecurrentThe RADIUS authentication string.
1.3.6.1.4.1.20301.2.7.18.1.1.3.15ScalarradCurCfgLocalread-onlycurrentEnable or disable RADIUS local for telnet/ssh/http/https.
1.3.6.1.4.1.20301.2.7.18.1.1.3.16ScalarradNewCfgLocalread-writecurrentEnable or disable RADIUS local for telnet/ssh/http/https.
1.3.6.1.4.1.20301.2.7.18.1.1.3.17ScalarradCurCfgAuthenSecondStringread-onlycurrentThe second RADIUS authentication string.
1.3.6.1.4.1.20301.2.7.18.1.1.3.18ScalarradNewCfgAuthenSecondStringread-writecurrentThe second RADIUS authentication string.
1.3.6.1.4.1.20301.2.7.18.1.1.3.19ScalarradCurCfgSecBdread-onlycurrentEnable or disable RADIUS secure local for telnet.
1.3.6.1.4.1.20301.2.7.18.1.1.3.20ScalarradNewCfgSecBdread-writecurrentEnable or disable RADIUS secure local for telnet.
1.3.6.1.4.1.20301.2.7.18.1.1.3.21ScalarradCurCfgPorttoUseread-onlycurrentSpecify whether the Radius should be performed over the data port or the management port.
1.3.6.1.4.1.20301.2.7.18.1.1.3.22ScalarradNewCfgPorttoUseread-writecurrentSpecify whether the Radius should be performed over the data port or the management port.
1.3.6.1.4.1.20301.2.7.18.1.1.3.23ScalarradCurCfgSecPorttoUseread-onlycurrentSpecify whether the Radius should be performed over the data port or the management port.
1.3.6.1.4.1.20301.2.7.18.1.1.3.24ScalarradNewCfgSecPorttoUseread-writecurrentSpecify whether the Radius should be performed over the data port or the management port.
1.3.6.1.4.1.20301.2.7.18.1.1.4NodeagNTP
1.3.6.1.4.1.20301.2.7.18.1.1.4.1ScalaragCurCfgNTPServerread-onlycurrentThe NTP Server Address.
1.3.6.1.4.1.20301.2.7.18.1.1.4.2ScalaragNewCfgNTPServerread-writecurrentThe NTP Server Address.
1.3.6.1.4.1.20301.2.7.18.1.1.4.3ScalaragCurCfgNTPResyncIntervalread-onlycurrentThe NTP Server resync interval in minutes.
1.3.6.1.4.1.20301.2.7.18.1.1.4.4ScalaragNewCfgNTPResyncIntervalread-writecurrentThe NTP Server resync interval in minutes.
1.3.6.1.4.1.20301.2.7.18.1.1.4.9ScalaragCurCfgNTPServiceread-onlycurrentEnable/disable NTP Service.
1.3.6.1.4.1.20301.2.7.18.1.1.4.10ScalaragNewCfgNTPServiceread-writecurrentEnable/disable NTP Service.
1.3.6.1.4.1.20301.2.7.18.1.1.4.11ScalaragCurCfgNTPSecServerread-onlycurrentThe Secondary NTP Server Address.
1.3.6.1.4.1.20301.2.7.18.1.1.4.12ScalaragNewCfgNTPSecServerread-writecurrentThe Secondary NTP Server Address.
1.3.6.1.4.1.20301.2.7.18.1.1.4.13ScalaragCurCfgNTPServerPortread-onlycurrentChoose the port that the primary server is connected to.
1.3.6.1.4.1.20301.2.7.18.1.1.4.14ScalaragNewCfgNTPServerPortread-writecurrentChoose the port that the primary server is connected to.
1.3.6.1.4.1.20301.2.7.18.1.1.4.15ScalaragCurCfgNTPSecServerPortread-onlycurrentChoose the port that the secondary server is connected to.
1.3.6.1.4.1.20301.2.7.18.1.1.4.16ScalaragNewCfgNTPSecServerPortread-writecurrentChoose the port that the secondary server is connected to.
1.3.6.1.4.1.20301.2.7.18.1.1.5NodeagSyslog
1.3.6.1.4.1.20301.2.7.18.1.1.5.1ScalaragCurCfgSyslogHostread-onlycurrentThe syslog host IP address in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.2ScalaragNewCfgSyslogHostread-writecurrentThe syslog host IP address in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.3ScalaragCurCfgSyslog2Hostread-onlycurrentThe second syslog host IP address in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.4ScalaragNewCfgSyslog2Hostread-writecurrentThe second syslog host IP address in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.5ScalaragCurCfgSyslogFacread-onlycurrentThe facility level of syslog host in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.6ScalaragNewCfgSyslogFacread-writecurrentThe facility level of syslog host in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.7ScalaragCurCfgSyslog2Facread-onlycurrentThe facility level of second syslog host in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.8ScalaragNewCfgSyslog2Facread-writecurrentThe facility level of second syslog host in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.9ScalaragClrSyslogMsgsread-writecurrentClears all current Syslog messages.
1.3.6.1.4.1.20301.2.7.18.1.1.5.10ScalaragSyslogMsgTableMaxSizeread-onlycurrentThe maximum number of rows in the syslog message table.
1.3.6.1.4.1.20301.2.7.18.1.1.5.11TableagSyslogMsgTablenot-accessiblecurrentThe table of syslog messages.
1.3.6.1.4.1.20301.2.7.18.1.1.5.11.1RowagSyslogMsgTableEntrynot-accessiblecurrentA syslog message stored on the switch.
1.3.6.1.4.1.20301.2.7.18.1.1.5.11.1.1ColumnagSyslogMsgIndexread-onlycurrentThe syslog message table index.
1.3.6.1.4.1.20301.2.7.18.1.1.5.11.1.2ColumnagSyslogMessageread-onlycurrentThe syslog message.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12NodeagLog
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.1ScalaragNewCfgSyslogTrapConsoleread-writecurrentEnable or disable console syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.2ScalaragCurCfgSyslogTrapConsoleread-onlycurrentEnable or disable console syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.3ScalaragNewCfgSyslogTrapSystemread-writecurrentEnable or disable system level syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.4ScalaragCurCfgSyslogTrapSystemread-onlycurrentEnable or disable system level syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.5ScalaragNewCfgSyslogTrapMgmtread-writecurrentEnable or disable management(flash, config, login) syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.6ScalaragCurCfgSyslogTrapMgmtread-onlycurrentEnable or disable management(flash, config, login) syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.7ScalaragNewCfgSyslogTrapCliread-writecurrentEnable or disable CLI generated error syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.8ScalaragCurCfgSyslogTrapCliread-onlycurrentEnable or disable CLI generated error syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.9ScalaragNewCfgSyslogTrapStgread-writecurrentEnable or disable spanning tree syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.10ScalaragCurCfgSyslogTrapStgread-onlycurrentEnable or disable spanning tree syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.11ScalaragNewCfgSyslogTrapVlanread-writecurrentEnable or disable VLAN syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.12ScalaragCurCfgSyslogTrapVlanread-onlycurrentEnable or disable VLAN syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.19ScalaragNewCfgSyslogTrapSshread-writecurrentEnable or disable SSH, RADIUS syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.20ScalaragCurCfgSyslogTrapSshread-onlycurrentEnable or disable SSH, RADIUS syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.25ScalaragNewCfgSyslogTrapNtpread-writecurrentEnable or disable NTP syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.26ScalaragCurCfgSyslogTrapNtpread-onlycurrentEnable or disable NTP syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.31ScalaragNewCfgSyslogTrapIpread-writecurrentEnable or disable IP related syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.32ScalaragCurCfgSyslogTrapIpread-onlycurrentEnable or disable IP related syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.35ScalaragNewCfgSyslogTrapWebread-writecurrentEnable or disable WEBUI related syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.36ScalaragCurCfgSyslogTrapWebread-onlycurrentEnable or disable WEBUI related syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.45ScalaragNewCfgSyslogTrapRmonread-writecurrentEnable or disable RMON related syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.46ScalaragCurCfgSyslogTrapRmonread-onlycurrentEnable or disable RMON related syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.49ScalaragNewCfgSyslogTrap8021xread-writecurrentEnable or disable 802.1x related syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.50ScalaragCurCfgSyslogTrap8021xread-onlycurrentEnable or disable 802.1x related syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.53ScalaragNewCfgSyslogTrapCfgread-writecurrentEnable or disable CFG related syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.54ScalaragCurCfgSyslogTrapCfgread-onlycurrentEnable or disable CFG related syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.55ScalaragNewCfgSyslogTrapServerread-writecurrentEnable or disable Server related syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.56ScalaragCurCfgSyslogTrapServerread-onlycurrentEnable or disable Server related syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.57ScalaragNewCfgSyslogTrapDifftrakread-writecurrentEnable or disable Difftrak related syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.58ScalaragCurCfgSyslogTrapDifftrakread-onlycurrentEnable or disable Difftrak related syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.61ScalaragNewCfgSyslogTrapHotlinksread-writecurrentEnable or disable Hot Links related syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.62ScalaragCurCfgSyslogTrapHotlinksread-onlycurrentEnable or disable Hot Links related syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.63ScalaragNewCfgSyslogTrapLldpread-writecurrentEnable or disable LLDP related syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.64ScalaragCurCfgSyslogTrapLldpread-onlycurrentEnable or disable LLDP related syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.65ScalaragNewCfgSyslogTrapAllread-writecurrentEnable or disable all syslog and SNMP traps in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.66ScalaragCurCfgSyslogTrapAllread-onlycurrentEnable or disable all syslog and SNMP traps, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.67ScalaragNewCfgSyslogTrapIpv6read-writecurrentEnable or disable IPv6 related syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.68ScalaragCurCfgSyslogTrapIpv6read-onlycurrentEnable or disable IPv6 related syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.73ScalaragNewCfgSyslogTrapFailoverread-writecurrentEnable or disable failover related syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.74ScalaragCurCfgSyslogTrapFailoverread-onlycurrentEnable or disable failover related syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.77ScalaragNewCfgSyslogTrapLacpread-writecurrentEnable or disable LACP syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.78ScalaragCurCfgSyslogTrapLacpread-onlycurrentEnable or disable LACP syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.79ScalaragNewCfgSyslogTrapLinkread-writecurrentEnable or disable all syslog and SNMP traps, in link up/down.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.80ScalaragCurCfgSyslogTrapLinkread-onlycurrentEnable or disable all syslog and SNMP traps, as currently configured in link up/down.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.93ScalaragNewCfgSyslogTrapCfgchgread-writecurrentEnable or disable configuration change related syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.94ScalaragCurCfgSyslogTrapCfgchgread-onlycurrentEnable or disable configuration change related syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.95ScalaragNewCfgSyslogTrapVlagread-writecurrentEnable or disable Vlag related syslog and SNMP trap.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.96ScalaragCurCfgSyslogTrapVlagread-onlycurrentEnable or disable Vlag related syslog and SNMP trap.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.99ScalaragNewCfgSyslogTrapIgmpGroupread-writecurrentEnable or disable all IGMP GROUP-related syslog and SNMP traps.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.100ScalaragCurCfgSyslogTrapIgmpGroupread-onlycurrentEnable or disable all IGMP GROUP-related syslog and SNMP traps.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.101ScalaragNewCfgSyslogTrapIgmpMrouterread-writecurrentEnable or disable all IGMP MROUTER-related syslog and SNMP traps.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.102ScalaragCurCfgSyslogTrapIgmpMrouterread-onlycurrentEnable or disable all IGMP MROUTER-related syslog and SNMP traps.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.103ScalaragNewCfgSyslogTrapIgmpQuerierread-writecurrentEnable or disable all IGMP QUERIER-related syslog and SNMP traps.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.104ScalaragCurCfgSyslogTrapIgmpQuerierread-onlycurrentEnable or disable all IGMP QUERIER-related syslog and SNMP traps.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.107ScalaragNewCfgSyslogTrapPrivateVlanread-writecurrentEnable or disable all Private VLAN-related syslog and SNMP traps, as configured in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.108ScalaragCurCfgSyslogTrapPrivateVlanread-onlycurrentEnable or disable all Private VLAN-related syslog and SNMP traps, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.109ScalaragNewCfgSyslogTrapSlpread-writecurrentEnable or disable all SLP-related syslog and SNMP traps, as configured in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.110ScalaragCurCfgSyslogTrapSlpread-onlycurrentEnable or disable all SLP-related syslog and SNMP traps, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.111ScalaragNewCfgSyslogTrapNetconfread-writecurrentEnable or disable Netconf syslog and SNMP trap in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.12.112ScalaragCurCfgSyslogTrapNetconfread-onlycurrentEnable or disable Netconf syslog and SNMP trap, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.13ScalaragCurCfgSyslogSevread-onlycurrentThe severity of syslog host in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.14ScalaragNewCfgSyslogSevread-writecurrentThe severity of syslog host in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.15ScalaragCurCfgSyslog2Sevread-onlycurrentThe severity of syslog2 host in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.16ScalaragNewCfgSyslog2Sevread-writecurrentThe severity of syslogs host in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.17ScalaragCurCfgSyslogHostPortread-onlycurrentChoose the port that the primary Syslog server is connected to.
1.3.6.1.4.1.20301.2.7.18.1.1.5.18ScalaragNewCfgSyslogHostPortread-writecurrentChoose the port that the primary Syslog server is connected to.
1.3.6.1.4.1.20301.2.7.18.1.1.5.19ScalaragCurCfgSyslog2HostPortread-onlycurrentChoose the port that the secondary Syslog server is connected to.
1.3.6.1.4.1.20301.2.7.18.1.1.5.20ScalaragNewCfgSyslog2HostPortread-writecurrentChoose the port that the secondary Syslog server is connected to.
1.3.6.1.4.1.20301.2.7.18.1.1.5.23ScalaragCurCfgSyslogConsoleSevread-onlycurrentThe severity of syslogs console in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.24ScalaragNewCfgSyslogConsoleSevread-writecurrentThe severity of syslogs console in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.25ScalaragCurCfgSyslogFlashSevread-onlycurrentThe severity of syslogs flash in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.5.26ScalaragNewCfgSyslogFlashSevread-writecurrentThe severity of syslogs flash in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.7NodeagTransfer
1.3.6.1.4.1.20301.2.7.18.1.1.7.1ScalaragTransferServerread-writecurrentThe FTP/TFTP server IP address or domain name.
1.3.6.1.4.1.20301.2.7.18.1.1.7.2ScalaragTransferImageread-writecurrentWhere the image file should be loaded in flash.
1.3.6.1.4.1.20301.2.7.18.1.1.7.3ScalaragTransferImageFileNameread-writecurrentThe image file name to be transferred.
1.3.6.1.4.1.20301.2.7.18.1.1.7.4ScalaragTransferCfgFileNameread-writecurrentThe configuration file name.
1.3.6.1.4.1.20301.2.7.18.1.1.7.5ScalaragTransferDumpFileNameread-writecurrentThe core dump file name.
1.3.6.1.4.1.20301.2.7.18.1.1.7.6ScalaragTransferActionread-writecurrentThis is an action object to perform various FTP/TFTP Get or Put functions. The FTP/TFTP sever is specified in agTransferServer object. img-get(2) - Download sw…
1.3.6.1.4.1.20301.2.7.18.1.1.7.7ScalaragTransferLastActionStatusread-onlycurrentThe recorded status of the previous FTP/TFTP activity.
1.3.6.1.4.1.20301.2.7.18.1.1.7.8ScalaragTransferPortread-writecurrentSpecify whether the FTP/TFTP operation should be performed over the data port or the management port.
1.3.6.1.4.1.20301.2.7.18.1.1.7.9ScalaragTransferUserNameread-writecurrentThe username for the FTP server or blank for TFTP server.
1.3.6.1.4.1.20301.2.7.18.1.1.7.10ScalaragTransferPasswordread-writecurrentThe password for the FTP server. For security reason, an empty string will be returned when the OID is read.
1.3.6.1.4.1.20301.2.7.18.1.1.7.11ScalaragTransferTSDumpFileNameread-writecurrentThe TS dump file name.
1.3.6.1.4.1.20301.2.7.18.1.1.7.14ScalaragTransferLastConfigurationActionStatusread-onlycurrentThe status of the last configuration action using the file ftp/tftp'd from server.
1.3.6.1.4.1.20301.2.7.18.1.1.7.15ScalaragTransferCaFileNameread-writecurrentThe CA certificate file name.
1.3.6.1.4.1.20301.2.7.18.1.1.7.16ScalaragTransferHostCertFileNameread-writecurrentThe Host certificate file name.
1.3.6.1.4.1.20301.2.7.18.1.1.7.17ScalaragTransferHostKeyFileNameread-writecurrentThe Host private key file name.
1.3.6.1.4.1.20301.2.7.18.1.1.7.18ScalaragTransferProtocolread-writecurrentThe protocol used by this transfer.
1.3.6.1.4.1.20301.2.7.18.1.1.7.19ScalaragServerPortread-writecurrentThe port is listened on the server.
1.3.6.1.4.1.20301.2.7.18.1.1.7.26ScalaragTransferCSRFileNameread-writecurrentThe CSR file name .
1.3.6.1.4.1.20301.2.7.18.1.1.8NodeagApply
1.3.6.1.4.1.20301.2.7.18.1.1.8.1ScalaragApplyPendingread-onlycurrentThis object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user t…
1.3.6.1.4.1.20301.2.7.18.1.1.8.2ScalaragApplyConfigread-writecurrentWhen this object is read the current state is returned. idle(2) indicates that there is no apply in progess. complete(4) indicates that the last apply operatio…
1.3.6.1.4.1.20301.2.7.18.1.1.8.4ScalaragApplyTableSizeread-onlycurrentThe number of strings in the apply table.
1.3.6.1.4.1.20301.2.7.18.1.1.8.5TableagApplyTablenot-accessiblecurrentThe table of failure reasons for an apply of current configuration block changes.
1.3.6.1.4.1.20301.2.7.18.1.1.8.5.1RowagApplyTableEntrynot-accessiblecurrentA row in the table of failure reasons for an apply (information about a particular reason of failure).
1.3.6.1.4.1.20301.2.7.18.1.1.8.5.1.1ColumnagApplyIndexread-onlycurrentThe table index.
1.3.6.1.4.1.20301.2.7.18.1.1.8.5.1.2ColumnagApplyStringread-onlycurrentA string in the apply table.
1.3.6.1.4.1.20301.2.7.18.1.1.11NodeagTacacsConfig
1.3.6.1.4.1.20301.2.7.18.1.1.11.1ScalartacCurCfgPrimaryServerread-onlycurrentThe Hostname of the Primary TACACS+ server.
1.3.6.1.4.1.20301.2.7.18.1.1.11.2ScalartacNewCfgPrimaryServerread-writecurrentThe Hostname of the Primary TACACS+ server.
1.3.6.1.4.1.20301.2.7.18.1.1.11.3ScalartacCurCfgSecondaryServerread-onlycurrentThe Hostname of the Secondary TACACS+ server.
1.3.6.1.4.1.20301.2.7.18.1.1.11.4ScalartacNewCfgSecondaryServerread-writecurrentThe Hostname of the Secondary TACACS+ server.
1.3.6.1.4.1.20301.2.7.18.1.1.11.5ScalartacCurCfgPortread-onlycurrentSpecify the TACACS+ port number.
1.3.6.1.4.1.20301.2.7.18.1.1.11.6ScalartacNewCfgPortread-writecurrentSpecify the TACACS+ port number.
1.3.6.1.4.1.20301.2.7.18.1.1.11.7ScalartacCurCfgTimeoutread-onlycurrentThe maximum number of seconds before resending authentication to TACACS+ server.
1.3.6.1.4.1.20301.2.7.18.1.1.11.8ScalartacNewCfgTimeoutread-writecurrentThe maximum number of seconds before resending authentication to TACACS+ server.
1.3.6.1.4.1.20301.2.7.18.1.1.11.9ScalartacCurCfgRetriesread-onlycurrentNumber of retries to the TACACS+ server.
1.3.6.1.4.1.20301.2.7.18.1.1.11.10ScalartacNewCfgRetriesread-writecurrentNumber of retries to the TACACS+ server.
1.3.6.1.4.1.20301.2.7.18.1.1.11.11ScalartacCurCfgStateread-onlycurrentEnable or disable TACACS+ authentication.
1.3.6.1.4.1.20301.2.7.18.1.1.11.12ScalartacNewCfgStateread-writecurrentEnable or disable TACACS+ authentication.
1.3.6.1.4.1.20301.2.7.18.1.1.11.13ScalartacCurCfgAuthenStringread-onlycurrentThe TACACS+ authentication string.
1.3.6.1.4.1.20301.2.7.18.1.1.11.14ScalartacNewCfgAuthenStringread-writecurrentThe TACACS+ authentication string.
1.3.6.1.4.1.20301.2.7.18.1.1.11.15ScalartacCurCfgLocalread-onlycurrentEnable or disable TACACS+ local for telnet/ssh/http/https.
1.3.6.1.4.1.20301.2.7.18.1.1.11.16ScalartacNewCfgLocalread-writecurrentEnable or disable TACACS+ local for telnet/ssh/http/https.
1.3.6.1.4.1.20301.2.7.18.1.1.11.17ScalartacCurCfgAuthenSecondStringread-onlycurrentThe second TACACS+ authentication string.
1.3.6.1.4.1.20301.2.7.18.1.1.11.18ScalartacNewCfgAuthenSecondStringread-writecurrentThe second TACACS+ authentication string.
1.3.6.1.4.1.20301.2.7.18.1.1.11.19ScalartacCurCfgCmdAuthorread-onlycurrentEnable or disable TACACS+ command authorization.
1.3.6.1.4.1.20301.2.7.18.1.1.11.20ScalartacNewCfgCmdAuthorread-writecurrentEnable or disable TACACS+ command authorization.
1.3.6.1.4.1.20301.2.7.18.1.1.11.21ScalartacCurCfgCmdLoggingread-onlycurrentEnable or disable TACACS+ command logging.
1.3.6.1.4.1.20301.2.7.18.1.1.11.22ScalartacNewCfgCmdLoggingread-writecurrentEnable or disable TACACS+ command logging.
1.3.6.1.4.1.20301.2.7.18.1.1.11.23ScalartacCurCfgSecBdread-onlycurrentEnable or disable TACACS+ secure local for telnet.
1.3.6.1.4.1.20301.2.7.18.1.1.11.24ScalartacNewCfgSecBdread-writecurrentEnable or disable TACACS+ secure local for telnet.
1.3.6.1.4.1.20301.2.7.18.1.1.11.25ScalartacCurCfgCmapread-onlycurrentEnable/Disable Tacacs+ new privilege level mapping, as configured in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.11.26ScalartacNewCfgCmapread-writecurrentEnable/Disable Tacacs+ new privilege level mapping.
1.3.6.1.4.1.20301.2.7.18.1.1.11.29ScalartacCurCfgEnaPassChangeread-onlycurrentEnable/Disable Tacacs+ password change.
1.3.6.1.4.1.20301.2.7.18.1.1.11.30ScalartacNewCfgEnaPassChangeread-writecurrentEnable/Disable Tacacs+ password change.
1.3.6.1.4.1.20301.2.7.18.1.1.11.31ScalartacChangePassForUserread-writecurrentThe username for changing server password.
1.3.6.1.4.1.20301.2.7.18.1.1.11.32ScalartacChangePassCurPassread-onlycurrentThe current password for tacacs server.
1.3.6.1.4.1.20301.2.7.18.1.1.11.33ScalartacChangePassNewPassread-writecurrentThe new password for tacacs server.
1.3.6.1.4.1.20301.2.7.18.1.1.11.34ScalartacChangePassForServerread-writecurrentChange password for <1/2> Tacacs+ server.
1.3.6.1.4.1.20301.2.7.18.1.1.11.35ScalartacCurCfgPorttoUseread-onlycurrentSpecify whether the Tacacs should be performed over the data port or the management port.
1.3.6.1.4.1.20301.2.7.18.1.1.11.36ScalartacNewCfgPorttoUseread-writecurrentSpecify whether the Tacacs should be performed over the data port or the management port.
1.3.6.1.4.1.20301.2.7.18.1.1.11.37ScalartacCurCfgSecPorttoUseread-onlycurrentSpecify whether the Tacacs should be performed over the data port or the management port.
1.3.6.1.4.1.20301.2.7.18.1.1.11.38ScalartacNewCfgSecPorttoUseread-writecurrentSpecify whether the Tacacs should be performed over the data port or the management port.
1.3.6.1.4.1.20301.2.7.18.1.1.11.39TableagTacacsUserMapCurCfgTablenot-accessiblecurrentThe table of tacacs+ user map current configuration.
1.3.6.1.4.1.20301.2.7.18.1.1.11.39.1RowagTacacsUserMapCurCfgTableEntrynot-accessiblecurrentA row in the tacacs+ user mapping table.
1.3.6.1.4.1.20301.2.7.18.1.1.11.39.1.1ColumnagTacacsUserMapCurCfgUIdread-onlycurrentThe current config remote privilege identifier. The identifier value corresponds to the remote privilege.
1.3.6.1.4.1.20301.2.7.18.1.1.11.39.1.2ColumnagTacacsUserMapCurCfgMappingread-onlycurrentCurrent Tacacs+ user privilege mappings. The correspondence between the local privilege and the remote privilege is: - The remote privilege is the privilege id…
1.3.6.1.4.1.20301.2.7.18.1.1.11.40TableagTacacsUserMapNewCfgTablenot-accessiblecurrentThe table of tacacs+ user map new configuration.
1.3.6.1.4.1.20301.2.7.18.1.1.11.40.1RowagTacacsUserMapNewCfgTableEntrynot-accessiblecurrentA row in the tacacs+ user mapping table.
1.3.6.1.4.1.20301.2.7.18.1.1.11.40.1.1ColumnagTacacsUserMapNewCfgUIdread-onlycurrentThe new config remote privilege identifier. The identifier value corresponds to the remote privilege.
1.3.6.1.4.1.20301.2.7.18.1.1.11.40.1.2ColumnagTacacsUserMapNewCfgMappingread-createcurrentSet new Tacacs+ user privilege mappings. The correspondence between the local privilege and the remote privilege is: - The remote privilege is the privilege id…
1.3.6.1.4.1.20301.2.7.18.1.1.11.41ScalartacNewCfgDirectedRequestread-writecurrentEnable/Disable tacacs directed request.
1.3.6.1.4.1.20301.2.7.18.1.1.11.42ScalartacCurCfgDirectedRequestread-onlycurrentThe current tacacs directed request state.
1.3.6.1.4.1.20301.2.7.18.1.1.11.43ScalartacCurCfgAttemptsread-onlycurrentNumber of login attempts to the TACACS+ server.
1.3.6.1.4.1.20301.2.7.18.1.1.11.44ScalartacNewCfgAttemptsread-writecurrentNumber of login attempts to the TACACS+ server.
1.3.6.1.4.1.20301.2.7.18.1.1.11.45ScalartacCurBypassEnableread-onlycurrentStatus of the enable bypass.If the status of this object is enabled, user authenticated via TACACS+ with admin previllage is granted enable previllage access.I…
1.3.6.1.4.1.20301.2.7.18.1.1.11.46ScalartacNewBypassEnableread-writecurrentStatus of the enable bypass.If the status of this object is enabled, user authenticated via TACACS+ with admin previllage is granted enable previllage access.I…
1.3.6.1.4.1.20301.2.7.18.1.1.11.47ScalartacCurCfgEnableAccountingread-onlycurrentCurrent TACACS+ accounting state.
1.3.6.1.4.1.20301.2.7.18.1.1.11.48ScalartacNewCfgEnableAccountingread-writecurrentEnable/Disable TACACS+ accounting.
1.3.6.1.4.1.20301.2.7.18.1.1.12NodeagMgmtNetConfig
1.3.6.1.4.1.20301.2.7.18.1.1.12.1ScalaragMgmtNetTableMaxSizeread-onlycurrentThe maximum number of entries in the Management Network Table.
1.3.6.1.4.1.20301.2.7.18.1.1.12.2TableagCurCfgMgmtNetTablenot-accessiblecurrentThe table for Management Network definitions in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.12.2.1RowagCurCfgMgmtNetEntrynot-accessiblecurrentA row in the management network definition table.
1.3.6.1.4.1.20301.2.7.18.1.1.12.2.1.1ColumnagCurCfgMgmtNetIndexread-onlycurrentThe index of the Management Network Definition table.
1.3.6.1.4.1.20301.2.7.18.1.1.12.2.1.2ColumnagCurCfgMgmtNetSubnetread-onlycurrentThe Management Network Address in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.12.2.1.3ColumnagCurCfgMgmtNetMaskread-onlycurrentThe Management Network Mask/Prefix Length in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.12.3TableagNewCfgMgmtNetTablenot-accessiblecurrentThe table for Management Network definitions in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.12.3.1RowagNewCfgMgmtNetEntrynot-accessiblecurrentA row in the management network definition table.
1.3.6.1.4.1.20301.2.7.18.1.1.12.3.1.1ColumnagNewCfgMgmtNetIndexread-onlycurrentThe index of the Management Network Definition table.
1.3.6.1.4.1.20301.2.7.18.1.1.12.3.1.2ColumnagNewCfgMgmtNetSubnetread-createcurrentThe Management Network Address in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.12.3.1.3ColumnagNewCfgMgmtNetMaskread-createcurrentThe Management Network Mask/Prefix length in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.12.3.1.4ColumnagNewCfgMgmtNetDeleteread-createcurrentBy setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.20301.2.7.18.1.1.12.4ScalaragMgmtNetClearread-writecurrentBy setting the value to delete(2), the entire table is cleared.
1.3.6.1.4.1.20301.2.7.18.1.1.13NodeagBoot
1.3.6.1.4.1.20301.2.7.18.1.1.13.1ScalaragCfgBootResetParametersread-writecurrentString formatated as 'weekday hour minute' where - weekday is none(0),sunday(1),monday(2), tuesday(3),wednesday(4),thursday(5),friday(6), saturday(7) - hour is…
1.3.6.1.4.1.20301.2.7.18.1.1.13.4ScalaragCfgBootResetread-writecurrentCancel pending switch reset.
1.3.6.1.4.1.20301.2.7.18.1.1.13.5ScalaragCfgBootNxtResetTimeread-onlycurrentDisplay the next scheduled reboot time.
1.3.6.1.4.1.20301.2.7.18.1.1.13.6ScalaragCfgBootPendingResetread-onlycurrentShows if there is any pending reboot scheduled. You should cancel any pending reboot scheduled before setting another.
1.3.6.1.4.1.20301.2.7.18.1.1.19NodeagAccess
1.3.6.1.4.1.20301.2.7.18.1.1.19.1ScalaragAccessUserMaxUserIDread-onlycurrentThe maximum number of User IDs.
1.3.6.1.4.1.20301.2.7.18.1.1.19.2TableagAccessUserCurCfgTablenot-accessiblecurrentThe table of Access user configuration.
1.3.6.1.4.1.20301.2.7.18.1.1.19.2.1RowagAccessUserCurCfgTableEntrynot-accessiblecurrentA row in the Access user configuration table.
1.3.6.1.4.1.20301.2.7.18.1.1.19.2.1.1ColumnagAccessUserCurCfgUIdread-onlycurrentThe User identifier.
1.3.6.1.4.1.20301.2.7.18.1.1.19.2.1.2ColumnagAccessUserCurCosread-onlycurrentThe user class of service.
1.3.6.1.4.1.20301.2.7.18.1.1.19.2.1.3ColumnagAccessUserCurCfgNameread-onlycurrentThe user name. Please note, the max length is 8 in stacking mode.
1.3.6.1.4.1.20301.2.7.18.1.1.19.2.1.4ColumnagAccessUserCurCfgPswdread-onlycurrentThe character string representing the user password.
1.3.6.1.4.1.20301.2.7.18.1.1.19.2.1.6ColumnagAccessUserCurCfgStateread-onlycurrentUser validation (enabled or disabled) in current configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.19.3TableagAccessUserNewCfgTablenot-accessiblecurrentThe table of Access user configuration.
1.3.6.1.4.1.20301.2.7.18.1.1.19.3.1RowagAccessUserNewCfgTableEntrynot-accessiblecurrentA row in the Access user configuration table.
1.3.6.1.4.1.20301.2.7.18.1.1.19.3.1.1ColumnagAccessUserNewCfgUIdread-onlycurrentThe User identifier.
1.3.6.1.4.1.20301.2.7.18.1.1.19.3.1.2ColumnagAccessUserNewCosread-createcurrentThe user class of service.
1.3.6.1.4.1.20301.2.7.18.1.1.19.3.1.3ColumnagAccessUserNewCfgNameread-createcurrentThe user name. Please note, the max length is 8 in stacking mode.
1.3.6.1.4.1.20301.2.7.18.1.1.19.3.1.4ColumnagAccessUserNewCfgPswdread-createcurrentThe character string representing the user password.
1.3.6.1.4.1.20301.2.7.18.1.1.19.3.1.7ColumnagAccessUserNewCfgStateread-createcurrentUser validation (enabled or disabled) in new configuration block.
1.3.6.1.4.1.20301.2.7.18.1.1.19.3.1.8ColumnagAccessUserNewCfgDeleteread-createcurrentThis is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User
1.3.6.1.4.1.20301.2.7.18.1.1.19.4ScalaragAccessCurStrongPasswordread-onlycurrentStatus of strong password.
1.3.6.1.4.1.20301.2.7.18.1.1.19.5ScalaragAccessNewStrongPasswordread-writecurrentSetting this value to enabled(1) enables strong password support, while disabled(0) disables it.
1.3.6.1.4.1.20301.2.7.18.1.1.19.6ScalaragAccessCurStrongPassValidityread-onlycurrentPassword validity in days.
1.3.6.1.4.1.20301.2.7.18.1.1.19.7ScalaragAccessNewStrongPassValidityread-writecurrentGet or set password validity in days.
1.3.6.1.4.1.20301.2.7.18.1.1.19.8ScalaragAccessCurStrongPassWarningread-onlycurrentWarning days before password expires.
1.3.6.1.4.1.20301.2.7.18.1.1.19.9ScalaragAccessNewStrongPassWarningread-writecurrentGet or set warning days before password expires.
1.3.6.1.4.1.20301.2.7.18.1.1.19.10ScalaragAccessCurStrongPassFailLogread-onlycurrentNumber of failed logins that trigger security notifications.
1.3.6.1.4.1.20301.2.7.18.1.1.19.11ScalaragAccessNewStrongPassFailLogread-writecurrentGet or set number of failed logins that trigger security notifications.
1.3.6.1.4.1.20301.2.7.18.1.1.19.12ScalaragAccessCurDefaultAdminread-onlycurrentGet default admin account state. (1) indicates enabled and (0) indicates disabled (0). Default it is enabled.
1.3.6.1.4.1.20301.2.7.18.1.1.19.13ScalaragAccessNewDefaultAdminread-writecurrentSetting this value to enabled (1) will enable the default admin account while disabled (0) will disable the default admin account. Default it is enabled.
1.3.6.1.4.1.20301.2.7.18.1.1.19.14ScalaragAccessCurStrongPassLockoutread-onlycurrentStatus of Lockout
1.3.6.1.4.1.20301.2.7.18.1.1.19.15ScalaragAccessNewStrongPassLockoutread-writecurrentSetting this value to enabled (1) enables account locking after trying for failed login attempts. While disabled (0) disables account locking.
1.3.6.1.4.1.20301.2.7.18.1.1.19.16ScalaragAccessCurStrongPassAttemptsMaxFailread-onlycurrentThe max number of failed logins before disabling account. Default value is 6
1.3.6.1.4.1.20301.2.7.18.1.1.19.17ScalaragAccessNewStrongPassAttemptsMaxFailread-writecurrentSets Max number of failed logins before disabling account. Default value is 6
1.3.6.1.4.1.20301.2.7.18.1.1.21NodeagLdapConfig
1.3.6.1.4.1.20301.2.7.18.1.1.21.1ScalarldapCurCfgPrimaryIpAddrread-onlycurrentThe IP address of the Primary LDAP server,it can be an ipv4 or ipv6 address.
1.3.6.1.4.1.20301.2.7.18.1.1.21.2ScalarldapNewCfgPrimaryIpAddrread-writecurrentThe IP address of the Primary LDAP server,it can be an ipv4 or ipv6 address.
1.3.6.1.4.1.20301.2.7.18.1.1.21.3ScalarldapCurCfgSecondaryIpAddrread-onlycurrentThe IP address of the Secondary LDAP server,it can be an ipv4 or ipv6 address.
1.3.6.1.4.1.20301.2.7.18.1.1.21.4ScalarldapNewCfgSecondaryIpAddrread-writecurrentThe IP address of the Secondary LDAP server,it can be an ipv4 or ipv6 address.
1.3.6.1.4.1.20301.2.7.18.1.1.21.5ScalarldapCurCfgPortread-onlycurrentSpecify the LDAP port number.
1.3.6.1.4.1.20301.2.7.18.1.1.21.6ScalarldapNewCfgPortread-writecurrentSpecify the LDAP port number.
1.3.6.1.4.1.20301.2.7.18.1.1.21.7ScalarldapCurCfgRetriesread-onlycurrentNumber of retries to the LDAP server.
1.3.6.1.4.1.20301.2.7.18.1.1.21.8ScalarldapNewCfgRetriesread-writecurrentNumber of retries to the LDAP server.
1.3.6.1.4.1.20301.2.7.18.1.1.21.9ScalarldapCurCfgTimeoutread-onlycurrentThe maximum number of seconds before resending authentication to LDAP server.
1.3.6.1.4.1.20301.2.7.18.1.1.21.10ScalarldapNewCfgTimeoutread-writecurrentThe maximum number of seconds before resending authentication to LDAP server.
1.3.6.1.4.1.20301.2.7.18.1.1.21.11ScalarldapCurCfgDomainread-onlycurrentThe LDAP domain name.
1.3.6.1.4.1.20301.2.7.18.1.1.21.12ScalarldapNewCfgDomainread-writecurrentThe LDAP domain name.
1.3.6.1.4.1.20301.2.7.18.1.1.21.13ScalarldapCurCfgLocalread-onlycurrentEnable or disable LDAP local for telnet/ssh/http/https.
1.3.6.1.4.1.20301.2.7.18.1.1.21.14ScalarldapNewCfgLocalread-writecurrentEnable or disable LDAP local for telnet/ssh/http/https.
1.3.6.1.4.1.20301.2.7.18.1.1.21.15ScalarldapCurCfgStateread-onlycurrentEnable or disable LDAP authentication.
1.3.6.1.4.1.20301.2.7.18.1.1.21.16ScalarldapNewCfgStateread-writecurrentEnable or disable LDAP authentication.
1.3.6.1.4.1.20301.2.7.18.1.1.21.17ScalarldapCurCfgPorttoUseread-onlycurrentSpecify whether the LDAP should be performed over the data port or the management port.
1.3.6.1.4.1.20301.2.7.18.1.1.21.18ScalarldapNewCfgPorttoUseread-writecurrentSpecify whether the LDAP should be performed over the data port or the management port.
1.3.6.1.4.1.20301.2.7.18.1.1.21.19ScalarldapCurCfgSecPorttoUseread-onlycurrentSpecify whether the LDAP should be performed over the data port or the management port.
1.3.6.1.4.1.20301.2.7.18.1.1.21.20ScalarldapNewCfgSecPorttoUseread-writecurrentSpecify whether the LDAP should be performed over the data port or the management port.
1.3.6.1.4.1.20301.2.7.18.1.1.21.21ScalarldapCurCfgUserNameAttributeread-onlycurrentThe LDAP username attribute.
1.3.6.1.4.1.20301.2.7.18.1.1.21.22ScalarldapNewCfgUserNameAttributeread-writecurrentThe LDAP username attribute (default = uid).
1.3.6.1.4.1.20301.2.7.18.1.1.21.30ScalarldapCurCfgGroupAttributeread-onlycurrentThe LDAP group attribute.
1.3.6.1.4.1.20301.2.7.18.1.1.21.31ScalarldapNewCfgGroupAttributeread-writecurrentLDAP group attribute (default=memberOf).
1.3.6.1.4.1.20301.2.7.18.1.1.21.32ScalarldapCurCfgLoginAttributeread-onlycurrentThe LDAP login attribute.
1.3.6.1.4.1.20301.2.7.18.1.1.21.33ScalarldapNewCfgLoginAttributeread-writecurrentLDAP login permission attribute (default=ibm-chassisRole).
1.3.6.1.4.1.20301.2.7.18.1.1.21.34ScalarldapCurCfgBaseDNread-onlycurrentThe LDAP base DN name .
1.3.6.1.4.1.20301.2.7.18.1.1.21.35ScalarldapNewCfgBaseDNread-writecurrentThe LDAP base DN name.
1.3.6.1.4.1.20301.2.7.18.1.1.21.36ScalarldapCurCfgBindmoderead-onlycurrentCurrent LDAP bind mode: login: use login creds for binding pre-config: use binddn creds for binding sasl: use SASL(Simple Authentication and Secure Layer) EXTE…
1.3.6.1.4.1.20301.2.7.18.1.1.21.37ScalarldapNewCfgBindmoderead-writecurrentSet LDAP bind mode: login: use login creds for binding pre-config: use binddn creds for binding sasl: use SASL(Simple Authentication and Secure Layer) EXTERNAL
1.3.6.1.4.1.20301.2.7.18.1.1.21.38ScalarldapCurCfgBindDNdnread-onlycurrentCurrent DN for binding with LDAP server (eg., cn=Manager,dc=my-domain,dc=com).
1.3.6.1.4.1.20301.2.7.18.1.1.21.39ScalarldapNewCfgBindDNdnread-writecurrentSet DN for binding with LDAP server (eg., cn=Manager,dc=my-domain,dc=com).
1.3.6.1.4.1.20301.2.7.18.1.1.21.40ScalarldapCurCfgBindDNekeyread-onlycurrentCurrent encrypted password for the DN.
1.3.6.1.4.1.20301.2.7.18.1.1.21.41ScalarldapNewCfgBindDNekeyread-writecurrentSet the encrypted password for the DN.
1.3.6.1.4.1.20301.2.7.18.1.1.21.42ScalarldapCurCfgBindDNkeyread-onlycurrentCurrent password for DN.
1.3.6.1.4.1.20301.2.7.18.1.1.21.43ScalarldapNewCfgBindDNkeyread-writecurrentSet the password for DN.
1.3.6.1.4.1.20301.2.7.18.1.1.21.44ScalarldapCurCfgGroupFilterread-onlycurrentCurrent LDAP group filter.
1.3.6.1.4.1.20301.2.7.18.1.1.21.45ScalarldapNewCfgGroupFilterread-writecurrentSet the LDAP group filter.
1.3.6.1.4.1.20301.2.7.18.1.1.21.46TableldapHostCurConfigTablenot-accessiblecurrentThe table for user specified host.
1.3.6.1.4.1.20301.2.7.18.1.1.21.46.1RowldapHostCurConfigTableEntrynot-accessiblecurrentA row in the user specified host table.
1.3.6.1.4.1.20301.2.7.18.1.1.21.46.1.1ColumnldapHostCurConfigIndexread-onlycurrentThe index of the user specified host table.
1.3.6.1.4.1.20301.2.7.18.1.1.21.46.1.2ColumnldapHostCurAddrread-onlycurrentSpecify the group addr.
1.3.6.1.4.1.20301.2.7.18.1.1.21.46.1.3ColumnldapHostCurPortread-onlycurrentSpecify the group port.
1.3.6.1.4.1.20301.2.7.18.1.1.21.46.1.4ColumnldapHostCurPortTyperead-onlycurrentSpecify the host port type. data-port: Data port mgt-port: Management port
1.3.6.1.4.1.20301.2.7.18.1.1.21.47TableldapHostNewConfigTablenot-accessiblecurrentThe table for user specified host.
1.3.6.1.4.1.20301.2.7.18.1.1.21.47.1RowldapHostNewConfigTableEntrynot-accessiblecurrentA row in the user specified host table.
1.3.6.1.4.1.20301.2.7.18.1.1.21.47.1.1ColumnldapHostNewConfigIndexread-onlycurrentThe index of the user specified host table.
1.3.6.1.4.1.20301.2.7.18.1.1.21.47.1.2ColumnldapHostNewAddrread-createcurrentSpecify the group addr.
1.3.6.1.4.1.20301.2.7.18.1.1.21.47.1.3ColumnldapHostNewPortread-createcurrentSpecify the host port.
1.3.6.1.4.1.20301.2.7.18.1.1.21.47.1.4ColumnldapHostNewPortTyperead-createcurrentSpecify the host port type. data-port: Data port mgt-port: Management port
1.3.6.1.4.1.20301.2.7.18.1.1.21.47.1.5ColumnldapHostNewCfgDeleteread-createcurrentThis is an action object to create or delete a host. other(1) is returned always when read. The following values are writable: delete(2)...to delete a host
1.3.6.1.4.1.20301.2.7.18.1.1.21.48ScalarldapCurCfgModeread-onlycurrentCurrent LDAP mode: legacy: legacy mode enhanced: enhanced mode
1.3.6.1.4.1.20301.2.7.18.1.1.21.49ScalarldapNewCfgModeread-writecurrentSet LDAP mode: legacy: set LDAP to legacy mode enhanced: set LDAP to enhanced mode
1.3.6.1.4.1.20301.2.7.18.1.1.21.50ScalarldapCurCfgSecuritymoderead-onlycurrentCurrent LDAP transmit mode and security options: clear: Cleartext mode starttls: Secure LDAP via StartTLS operation w/o cleartext fallback ldaps: Secure LDAP v…
1.3.6.1.4.1.20301.2.7.18.1.1.21.51ScalarldapNewCfgSecuritymoderead-writecurrentSet LDAP transmit mode and security options: clear: Cleartext mode starttls: Secure LDAP via StartTLS operation w/o cleartext fallback ldaps: Secure LDAP via L…
1.3.6.1.4.1.20301.2.7.18.1.1.21.52ScalarldapCurCfgMutualread-onlycurrentEnable or disable mutual authentication in TLS.
1.3.6.1.4.1.20301.2.7.18.1.1.21.53ScalarldapNewCfgMutualread-writecurrentEnable or disable mutual authentication in TLS.
1.3.6.1.4.1.20301.2.7.18.1.1.21.54ScalarldapCurCfgSrvread-onlycurrentEnable or disable DNS SRV to get LDAP server.
1.3.6.1.4.1.20301.2.7.18.1.1.21.55ScalarldapNewCfgSrvread-writecurrentEnable or disable DNS SRV to get LDAP server.
1.3.6.1.4.1.20301.2.7.18.1.1.22NodeagSSHConfig
1.3.6.1.4.1.20301.2.7.18.1.1.22.3ScalarsshCurCfgScpAdmread-onlycurrentSCP-only admin password.
1.3.6.1.4.1.20301.2.7.18.1.1.22.4ScalarsshNewCfgScpAdmread-writecurrentSet SCP-only admin password.
1.3.6.1.4.1.20301.2.7.18.1.1.22.5ScalarsshNewCfgHKeyGenread-writecurrentThis is an action object to generate the RSA host key. other(2) is returned always when read. The following values are writable: generate(1).. Generate the RSA…
1.3.6.1.4.1.20301.2.7.18.1.1.22.7ScalarsshCurCfgSSHPortread-onlycurrentSSH server port number.
1.3.6.1.4.1.20301.2.7.18.1.1.22.8ScalarsshNewCfgSSHPortread-writecurrentSet SSH server port number.
1.3.6.1.4.1.20301.2.7.18.1.1.22.9ScalarsshCurCfgScpApplySaveread-onlycurrentSCP apply and save.
1.3.6.1.4.1.20301.2.7.18.1.1.22.10ScalarsshNewCfgScpApplySaveread-writecurrentEnable/Disable the SCP apply and save.
1.3.6.1.4.1.20301.2.7.18.1.1.22.11ScalarsshCurCfgStatusread-onlycurrentSSH server status.
1.3.6.1.4.1.20301.2.7.18.1.1.22.12ScalarsshNewCfgStatusread-writecurrentTurn SSH server ON/OFF.
1.3.6.1.4.1.20301.2.7.18.1.1.25NodeagUSBCopy
1.3.6.1.4.1.20301.2.7.18.1.1.25.1ScalaragUSBoperationread-writecurrentSet operation: fromUSB(1): from USB to Flash toUSB(2): from Flash to USB
1.3.6.1.4.1.20301.2.7.18.1.1.25.2ScalaragUSBfileread-writecurrentUSB filename (to copy from or to copy to)
1.3.6.1.4.1.20301.2.7.18.1.1.25.3ScalaragUSBflashFileread-writecurrentSet flash file involved (boot image, image 1, active configuration, syslog, crashdump). Syslog and crashdump can only be copied to USB. (it is forbidden to cop…
1.3.6.1.4.1.20301.2.7.18.1.1.25.4ScalaragUSBcopyFileread-writecurrentWhen this object is read the current state is returned. idle(1) indicates that there is no copy in progess. complete(4) indicates that the last copy operation …
1.3.6.1.4.1.20301.2.7.18.1.1.25.5ScalaragUSBresultread-onlycurrentLast USB Copy action result.
1.3.6.1.4.1.20301.2.7.18.1.1.31NodeagCSRConfig
1.3.6.1.4.1.20301.2.7.18.1.1.31.1ScalarcsrCountryNameread-writecurrentCountry Code for the CSR (eg., US or UK)
1.3.6.1.4.1.20301.2.7.18.1.1.31.2ScalarcsrStateNameread-writecurrentState Name for the CSR (eg., California)
1.3.6.1.4.1.20301.2.7.18.1.1.31.3ScalarcsrCityNameread-writecurrentCity Name for the CSR (eg., Santa Clara)
1.3.6.1.4.1.20301.2.7.18.1.1.31.4ScalarcsrOrganizationNameread-writecurrentOrganization Name for the CSR (eg., Lenovo)
1.3.6.1.4.1.20301.2.7.18.1.1.31.5ScalarcsrUnitNameread-writecurrentOrganization Unit Name for the CSR (eg., Engineering)
1.3.6.1.4.1.20301.2.7.18.1.1.31.6ScalarcsrCommonNameread-writecurrentCommon Name for the CSR (eg., www.lenovo.com)
1.3.6.1.4.1.20301.2.7.18.1.1.31.7ScalarcsrEmailread-writecurrentEmail for the CSR (eg., [email protected])
1.3.6.1.4.1.20301.2.7.18.1.1.31.8ScalarcsrGenerateread-writecurrentWhen this object is read the current state is returned. complete(2) indicates that the last CSR generatation operation was completed. inprogress(3) indicates t…
1.3.6.1.4.1.20301.2.7.18.1.2NodeagentStats
1.3.6.1.4.1.20301.2.7.18.1.2.1NodepktStats
1.3.6.1.4.1.20301.2.7.18.1.2.1.1ScalarpktStatsAllocsread-onlycurrentTotal number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.20301.2.7.18.1.2.1.2ScalarpktStatsFreesread-onlycurrentTotal number of times the packet buffers are freed(released) to the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.20301.2.7.18.1.2.1.3ScalarpktStatsAllocFailsread-onlycurrentTotal number of packet allocation failures from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.20301.2.7.18.1.2.1.4ScalarpktStatsMediumsread-onlycurrentTotal number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol sta…
1.3.6.1.4.1.20301.2.7.18.1.2.1.5ScalarpktStatsJumbosread-onlycurrentTotal number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.20301.2.7.18.1.2.1.6ScalarpktStatsSmallsread-onlycurrentTotal number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.20301.2.7.18.1.2.1.7ScalarpktStatsMediumsHiWatermarkread-onlycurrentThe highest number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protoc…
1.3.6.1.4.1.20301.2.7.18.1.2.1.8ScalarpktStatsJumbosHiWatermarkread-onlycurrentThe highest number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.20301.2.7.18.1.2.1.9ScalarpktStatsSmallsHiWatermarkread-onlycurrentThe highest number of packet allocations with size less than or equal to 128 bytes from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.20301.2.7.18.1.2.1.10ScalarpktStatsDiscardsread-onlycurrentThe total number of packets which were chosen to be discarded because the number of buffers available in the packet buffer pool is low.
1.3.6.1.4.1.20301.2.7.18.1.2.2NodempCpuStats
1.3.6.1.4.1.20301.2.7.18.1.2.2.1ScalarmpCpuStatsUtil1Secondread-onlycurrentThe utilization of MP CPU over 1 second. It shows the percentage. It is deprecated.
1.3.6.1.4.1.20301.2.7.18.1.2.2.2ScalarmpCpuStatsUtil5Secondsread-onlycurrentThe utilization of MP CPU over 5 seconds. It shows the percentage. It is deprecated.
1.3.6.1.4.1.20301.2.7.18.1.2.2.3ScalarmpCpuStatsUtil1Minuteread-onlycurrentThe utilization of MP CPU over 1 minute. It shows the percentage. It is deprecated.
1.3.6.1.4.1.20301.2.7.18.1.2.2.5TablecpuUtilProcessStatsTablenot-accessiblecurrentThe table of CPU utilization per process statistics. It is deprecated.
1.3.6.1.4.1.20301.2.7.18.1.2.2.5.1RowcpuUtilProcessStatsTableEntrynot-accessiblecurrentA row in the CPU utilization stats per process table. It is deprecated.
1.3.6.1.4.1.20301.2.7.18.1.2.2.5.1.1ColumnprocessIdread-onlycurrentThe process ID.
1.3.6.1.4.1.20301.2.7.18.1.2.2.5.1.2ColumnprocessNameread-onlycurrentProcess Name.
1.3.6.1.4.1.20301.2.7.18.1.2.2.5.1.3ColumncpuProcessUtil1Secread-onlycurrentThe utilization of MP CPU over 1 second. It shows the percentage.
1.3.6.1.4.1.20301.2.7.18.1.2.2.5.1.4ColumncpuProcessUtil5Secread-onlycurrentThe utilization of MP CPU over 5 seconds. It shows the percentage.
1.3.6.1.4.1.20301.2.7.18.1.2.2.5.1.5ColumncpuProcessUtil1Minread-onlycurrentThe utilization of MP CPU over 1 min. It shows the percentage.
1.3.6.1.4.1.20301.2.7.18.1.2.2.5.1.6ColumncpuProcessUtil5Minread-onlycurrentThe utilization of MP CPU over 5 min. It shows the percentage.
1.3.6.1.4.1.20301.2.7.18.1.2.2.5.1.7ColumnprocessStatusread-onlycurrentProcess Status
1.3.6.1.4.1.20301.2.7.18.1.2.2.6ScalarmpCpuStatsUtil5Minutesread-onlycurrentThe utilization of MP CPU over 5 minutes. It shows the percentage. It is deprecated.
1.3.6.1.4.1.20301.2.7.18.1.2.2.7ScalarmpCpuStatsUtil1SecondRevread-onlycurrentThe utilization of MP CPU over 1 second. It shows the percentage.
1.3.6.1.4.1.20301.2.7.18.1.2.2.8ScalarmpCpuStatsUtil5SecondsRevread-onlycurrentThe utilization of MP CPU over 5 seconds. It shows the percentage.
1.3.6.1.4.1.20301.2.7.18.1.2.2.9ScalarmpCpuStatsUtil1MinuteRevread-onlycurrentThe utilization of MP CPU over 1 minute. It shows the percentage.
1.3.6.1.4.1.20301.2.7.18.1.2.2.10ScalarmpCpuStatsUtil5MinutesRevread-onlycurrentThe utilization of MP CPU over 5 minutes. It shows the percentage.
1.3.6.1.4.1.20301.2.7.18.1.2.2.11TablecpuUtilProcessStatsRevTablenot-accessiblecurrentThe table of CPU utilization per process statistics.
1.3.6.1.4.1.20301.2.7.18.1.2.2.11.1RowcpuUtilProcessStatsRevTableEntrynot-accessiblecurrentA row in the CPU utilization stats per process table.
1.3.6.1.4.1.20301.2.7.18.1.2.2.11.1.1ColumnprocessIdRevread-onlycurrentThe process ID.
1.3.6.1.4.1.20301.2.7.18.1.2.2.11.1.2ColumnprocessNameRevread-onlycurrentProcess Name.
1.3.6.1.4.1.20301.2.7.18.1.2.2.11.1.3ColumncpuProcessUtil1SecRevread-onlycurrentThe utilization of MP CPU over 1 second. It shows the percentage.
1.3.6.1.4.1.20301.2.7.18.1.2.2.11.1.4ColumncpuProcessUtil5SecRevread-onlycurrentThe utilization of MP CPU over 5 seconds. It shows the percentage.
1.3.6.1.4.1.20301.2.7.18.1.2.2.11.1.5ColumncpuProcessUtil1MinRevread-onlycurrentThe utilization of MP CPU over 1 min. It shows the percentage.
1.3.6.1.4.1.20301.2.7.18.1.2.2.11.1.6ColumncpuProcessUtil5MinRevread-onlycurrentThe utilization of MP CPU over 5 min. It shows the percentage.
1.3.6.1.4.1.20301.2.7.18.1.2.2.11.1.7ColumnprocessStatusRevread-onlycurrentProcess Status
1.3.6.1.4.1.20301.2.7.18.1.2.3NodeportStats
1.3.6.1.4.1.20301.2.7.18.1.2.3.1TableportStatsTablenot-accessiblecurrentThe table of port statistics.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1RowportStatsTableEntrynot-accessiblecurrentA row in the port stats table.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.1ColumnportStatsIndxread-onlycurrentThe port index.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.2ColumnportStatsPhyIfInOctetsread-onlycurrentThe total number of octets received on the interface, including framing characters.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.3ColumnportStatsPhyIfInUcastPktsread-onlycurrentThe number of subnetwork-unicast packets delivered to a higher-layer protocol.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.4ColumnportStatsPhyIfInNUcastPktsread-onlycurrentThe number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.5ColumnportStatsPhyIfInDiscardsread-onlycurrentThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr…
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.6ColumnportStatsPhyIfInErrorsread-onlycurrentThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.7ColumnportStatsPhyIfInUnknownProtosread-onlycurrentThe number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.8ColumnportStatsPhyIfOutOctetsread-onlycurrentThe total number of octets transmitted out of the interface, including framing characters.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.9ColumnportStatsPhyIfOutUcastPktsread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se…
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.10ColumnportStatsPhyIfOutNUcastPktsread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre…
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.11ColumnportStatsPhyIfOutDiscardsread-onlycurrentThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso…
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.12ColumnportStatsPhyIfOutErrorsread-onlycurrentThe number of outbound packets that could not be transmitted because of errors.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.13ColumnportStatsPhyIfOutQLenread-onlycurrentThe length of the output packet queue (in packets).
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.14ColumnportStatsPhyIfInBroadcastPktsread-onlycurrentThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.15ColumnportStatsPhyIfOutBroadcastPktsread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including …
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.16ColumnportStatsClearread-writecurrentSetting this value to clear(2) clears the stats for this port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.17ColumnportStatsPhyIfInMulticastPktsread-onlycurrentThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.18ColumnportStatsPhyIfOutMulticastPktsread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including …
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.20ColumnportStatsLinkStateChangeread-onlycurrentNumber of link state changes.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.21ColumnportStatsPhyIfInFctlPktsread-onlycurrentThe number of inbound flow control packets.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.22ColumnportStatsPhyIfOutFctlPktsread-onlycurrentThe number of outbound flow control packets.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.23ColumnportStatsPhyIfInFctlPktsRateread-onlycurrentThe number of inbound flow control packets per second.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.24ColumnportStatsPhyIfOutFctlPktsRateread-onlycurrentThe number of outbound flow control packets per second.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.25ColumnportStatsPhyIfIngDiscdVlanread-onlycurrentThe number of packets, discarded because of VLAN.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.26ColumnportStatsPhyIfIngDiscdEgrMapread-onlycurrentThe number of packets, discarded because of empty egress portmap.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.27ColumnportStatsPhyIfIngDiscdFilterread-onlycurrentThe number of packets, discarded because of filter.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.28ColumnportStatsPhyIfIngDiscdPolicyread-onlycurrentThe number of packets, discarded because of policy.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.29ColumnportStatsPhyIfIngDiscdNonFwdStatread-onlycurrentThe number of packets, discarded because of Non-Forwarding State.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.30ColumnportStatsPhyIfIngDiscdIbpCbpread-onlycurrentThe number of packets discarded because of IBP/CBP.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.31ColumnportStatsDot1PortInFramesread-onlycurrentThe number of IN frames per port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.32ColumnportStatsDot1PortOutFramesread-onlycurrentThe number of OUT frames per port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.33ColumnportStatsDot1PortInDiscardsread-onlycurrentThe number of IN packets discarded per port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.34ColumnportStatsDot1TpLearnedEntryDiscardsread-onlycurrentThe number of Dot1Tp learned entries discarded.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.35ColumnportStatsDot1StpPortForwardTransitionsread-onlycurrentThe number of transitions ....
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.36ColumnportStatsPhyIfEgrHOLBlockDiscdread-onlycurrentThe number of packets, discarded because of HOL Blocking.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.37ColumnportStatsPhyIfEgrMMUDiscdread-onlycurrentThe number of packets, discarded by MMU because of zero port bitmap.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.38ColumnportStatsPhyIfEgrCellErrDiscdread-onlycurrentThe number of packets, discarded because of Cell Errors or purging.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.39ColumnportStatsPhyIfEgrMMUAgeDiscdread-onlycurrentThe number of packets, discarded because of MMU Aging. Applicable in 10/100 mode, incremented for frames aborted which were deferred for an excessive period of…
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.40ColumnportStatsPhyIfEgrOtherDiscdread-onlycurrentThe number of packets, discarded because of Other reasons.
1.3.6.1.4.1.20301.2.7.18.1.2.3.1.1.41ColumnportStatsPortAliasread-onlycurrentThe port alias.
1.3.6.1.4.1.20301.2.7.18.1.2.3.2Tabledot1xPortStatsTablenot-accessiblecurrentThe table of 802.1x port statistics.
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1Rowdot1xPortStatsTableEntrynot-accessiblecurrentA row in the 802.1x port stats table.
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.1Columndot1xPortStatsIndxread-onlycurrentThe 802.1x port stats index.
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.2ColumneapolFramesRxread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.3ColumneapolFramesTxread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.4ColumneapolStartFramesRxread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.5ColumneapolLogoffFramesRxread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.6ColumneapolRespIdFramesRxread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.7ColumneapolRespFramesRxread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.8ColumneapolReqIdFramesTxread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.9ColumneapolReqFramesTxread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.10ColumninvalidEapolFramesRxread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.11ColumneapLengthErrorFramesRxread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.12ColumnauthEntersConnectingread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.13ColumnauthEapLogoffsWhileConnectingread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.14ColumnauthEntersAuthenticatingread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.15ColumnauthSuccessesWhileAuthenticatingread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.16ColumnauthTimeoutsWhileAuthenticatingread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.17ColumnauthFailWhileAuthenticatingread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.18ColumnauthReauthsWhileAuthenticatingread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.19ColumnauthEapStartsWhileAuthenticatingread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.20ColumnauthEapLogoffWhileAuthenticatingread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.21ColumnauthReauthsWhileAuthenticatedread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.22ColumnauthEapStartsWhileAuthenticatedread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.23ColumnauthEapLogoffWhileAuthenticatedread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.24ColumnbackendResponsesread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.25ColumnbackendAccessChallengesread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.26ColumnbackendOtherRequestsToSupplicantread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.27ColumnbackendNonNakResponsesFromSupplicantread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.28ColumnbackendAuthSuccessesread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.29ColumnbackendAuthFailsread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.30ColumnlastEapolFrameVersionread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.31ColumnlastEapolFrameSourceread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.1.2.3.2.1.32Columndot1xPortStatsPortAliasread-onlycurrentThe 802.1x port stats alias.
1.3.6.1.4.1.20301.2.7.18.1.2.3.3TableportMgmtStatsTablenot-accessiblecurrentThe table of port statistics.
1.3.6.1.4.1.20301.2.7.18.1.2.3.3.1RowportMgmtStatsTableEntrynot-accessiblecurrentA row in the management port stats table.
1.3.6.1.4.1.20301.2.7.18.1.2.3.3.1.1ColumnportMgmtStatsIndxread-onlycurrentThe management port index.
1.3.6.1.4.1.20301.2.7.18.1.2.3.3.1.2ColumnportMgmtStatsRxBytesread-onlycurrentThe total number of bytes received.
1.3.6.1.4.1.20301.2.7.18.1.2.3.3.1.3ColumnportMgmtStatsTxBytesread-onlycurrentThe total number of bytes transmitted.
1.3.6.1.4.1.20301.2.7.18.1.2.3.3.1.4ColumnportMgmtStatsRxpacketsread-onlycurrentTotal number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.20301.2.7.18.1.2.3.3.1.5ColumnportMgmtStatsTxpacketsread-onlycurrentTotal number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.20301.2.7.18.1.2.3.3.1.6ColumnportMgmtStatsRxErrorsread-onlycurrentThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
1.3.6.1.4.1.20301.2.7.18.1.2.3.3.1.7ColumnportMgmtStatsTxErrorsread-onlycurrentThe number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
1.3.6.1.4.1.20301.2.7.18.1.2.3.3.1.8ColumnportMgmtStatsRxDroppedread-onlycurrentThe number of inbound packets that were dropped.
1.3.6.1.4.1.20301.2.7.18.1.2.3.3.1.9ColumnportMgmtStatsTxDroppedread-onlycurrentThe number of outbound packets that were dropped.
1.3.6.1.4.1.20301.2.7.18.1.2.3.3.1.10ColumnportMgmtStatsRxOverrunsread-onlycurrentThe number of data overruns over this link.
1.3.6.1.4.1.20301.2.7.18.1.2.3.3.1.11ColumnportMgmtStatsTxOverrunsread-onlycurrentThe number of data overruns over this link.
1.3.6.1.4.1.20301.2.7.18.1.2.3.3.1.12ColumnportMgmtStatsRxFrameread-onlycurrentThe number of frames received on this link.
1.3.6.1.4.1.20301.2.7.18.1.2.3.3.1.13ColumnportMgmtStatsTxCarrierread-onlycurrentThe number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a this interface.
1.3.6.1.4.1.20301.2.7.18.1.2.3.3.1.14ColumnportMgmtStatsRxMulticastread-onlycurrentThe total number of multicast packets received.
1.3.6.1.4.1.20301.2.7.18.1.2.3.3.1.15ColumnportMgmtStatsTxCollisionsread-onlycurrentThe number of collisions on this outbound segment.
1.3.6.1.4.1.20301.2.7.18.1.2.3.3.1.16ColumnportMgmtStatsPortAliasread-onlycurrentThe port alias.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4TableallportsStatsTablenot-accessiblecurrentThe table of all ports statistics.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1RowallportsStatsTableEntrynot-accessiblecurrentA row in the table of all ports statistics.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.1ColumnallportsStatsIndxread-onlycurrentThe port number.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.2ColumnallportsStatsDescrread-onlycurrentThe port description.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.3ColumnallportsStatsSpeedread-onlycurrentThe current operational speed of the port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.4ColumnallportsStatsPhysAddressread-onlycurrentThe port MAC Address.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.5ColumnallportsStatsAdminStatusread-onlycurrentThe port Admin state.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.6ColumnallportsStatsOperStatusread-onlycurrentThe port Operational Status.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.7ColumnallportsStatsInOctetsread-onlycurrentOctets In for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.8ColumnallportsStatsOutOctetsread-onlycurrentOctets Out for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.9ColumnallportsStatsInPktsread-onlycurrentPackets In for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.10ColumnallportsStatsOutPktsread-onlycurrentPackets Out for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.11ColumnallportsStatsInUcastread-onlycurrentUnicast Packets In for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.12ColumnallportsStatsOutUcastread-onlycurrentUnicast Packets Out for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.13ColumnallportsStatsInBcastread-onlycurrentBroadcasts Packets In for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.14ColumnallportsStatsOutBcastread-onlycurrentBroadcasts Packets Out for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.15ColumnallportsStatsInMcastread-onlycurrentMulticast Packets In for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.16ColumnallportsStatsOutMcastread-onlycurrentMulticast Packets Out for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.17ColumnallportsStatsInDiscardsread-onlycurrentDiscarded Packets for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.18ColumnallportsStatsOutDiscardsread-onlycurrentOutbound Packets for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.19ColumnallportsStatsInErrorsread-onlycurrentError Packets for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.20ColumnallportsStatsOutErrorsread-onlycurrentNot sent packets due to error.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.21ColumnallportsStatsInUnknownProtosread-onlycurrentUnknown protocol packets.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.22ColumnallportsStatsOutQLenread-onlycurrentOutbound Packet Queue Length.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.23ColumnallportsStatsipInReceivesread-onlycurrentIp In Receives.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.24ColumnallportsStatsipInHeaderErrorsread-onlycurrentIp In Header Errors.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.25ColumnallportsStatsipInDiscardsread-onlycurrentIp In Discards.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.26ColumnallportsStatsLinkStateChangeread-onlycurrentNumber of link state changes.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.27ColumnallportsStatsipInReceivesRateread-onlycurrentIp In Receives rate.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.28ColumnallportsStatsipInHeaderErrorsRateread-onlycurrentIp In Header Errors rate.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.29ColumnallportsStatsipInDiscardsRateread-onlycurrentIp In Discards rate.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.30ColumnallportsStatsInOctetsRateread-onlycurrentOctets In rate for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.31ColumnallportsStatsOutOctetsRateread-onlycurrentOctets Out rate for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.32ColumnallportsStatsInUcastRateread-onlycurrentUnicast Packets In rate for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.33ColumnallportsStatsOutUcastRateread-onlycurrentUnicast Packets Out rate for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.34ColumnallportsStatsInBcastRateread-onlycurrentBroadcasts Packets In rate for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.35ColumnallportsStatsOutBcastRateread-onlycurrentBroadcasts Packets Out rate for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.36ColumnallportsStatsInMcastRateread-onlycurrentMulticast Packets In rate for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.37ColumnallportsStatsOutMcastRateread-onlycurrentMulticast Packets Out rate for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.38ColumnallportsStatsInDiscardsRateread-onlycurrentDiscarded In Packets rate for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.39ColumnallportsStatsOutDiscardsRateread-onlycurrentDiscarded Out Packets rate for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.40ColumnallportsStatsInErrorsRateread-onlycurrentErroneus inbound packets rate for port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.41ColumnallportsStatsOutErrorsRateread-onlycurrentNot sent packets due to error rate.
1.3.6.1.4.1.20301.2.7.18.1.2.3.4.1.42ColumnallportsStatsPortAliasread-onlycurrentThe port alias.
1.3.6.1.4.1.20301.2.7.18.1.2.3.6ScalarclearPortsStatsread-writecurrentSetting this to clear(2) results in clearing the statistics for all ports.
1.3.6.1.4.1.20301.2.7.18.1.2.3.7Tabledot1RateStatsTablenot-accessiblecurrentThe table of bridging statistics per second.
1.3.6.1.4.1.20301.2.7.18.1.2.3.7.1Rowdot1RateStatsTableEntrynot-accessiblecurrentBridging statistics per second.
1.3.6.1.4.1.20301.2.7.18.1.2.3.7.1.1Columndot1RateStatsIndxread-onlycurrentThe port index.
1.3.6.1.4.1.20301.2.7.18.1.2.3.7.1.2Columndot1RatePortInFramesread-onlycurrentThe number of frames that have been received per second by this port from its segment.
1.3.6.1.4.1.20301.2.7.18.1.2.3.7.1.3Columndot1RatePortOutFramesread-onlycurrentThe number of frames that have been transmitted per second by this port to its segment.
1.3.6.1.4.1.20301.2.7.18.1.2.3.7.1.4Columndot1RatePortInDiscardsread-onlycurrentCount of valid frames received which were discarded per second.
1.3.6.1.4.1.20301.2.7.18.1.2.3.7.1.5Columndot1RateTpLearnedEntryDiscardsread-onlycurrentThe number per second of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them.
1.3.6.1.4.1.20301.2.7.18.1.2.3.7.1.8Columndot1RateStpPortForwardTransitionsread-onlycurrentThe number of times this port has transitioned per second from the Learning state to the Forwarding state.
1.3.6.1.4.1.20301.2.7.18.1.2.3.7.1.9Columndot1RatePortAliasread-onlycurrentThe port alias.
1.3.6.1.4.1.20301.2.7.18.1.2.3.8Tabledot3RateStatsTablenot-accessiblecurrentThe table of Ethernet statistics per second.
1.3.6.1.4.1.20301.2.7.18.1.2.3.8.1Rowdot3RateStatsTableEntrynot-accessiblecurrentEthernet statistics per second.
1.3.6.1.4.1.20301.2.7.18.1.2.3.8.1.1Columndot3RateStatsIndxread-onlycurrentThe port index.
1.3.6.1.4.1.20301.2.7.18.1.2.3.8.1.2Columndot3RateStatsAlignmentErrorsread-onlycurrentA count of frames received per second on a particular interface that are not an integral number of octets in length and do not pass the FCS check.
1.3.6.1.4.1.20301.2.7.18.1.2.3.8.1.3Columndot3RateStatsFCSErrorsread-onlycurrentA count of frames received per second on a particular interface that are an integral number of octets in length but do not pass the FCS check.
1.3.6.1.4.1.20301.2.7.18.1.2.3.8.1.4Columndot3RateStatsSingleCollisionFramesread-onlycurrentA count of successfully transmitted frames per second on a particular interface for which transmission is inhibited by exactly one collision.
1.3.6.1.4.1.20301.2.7.18.1.2.3.8.1.5Columndot3RateStatsMultipleCollisionFramesread-onlycurrentA count of successfully transmitted frames per second on a particular interface for which transmission is inhibited by more than one collision.
1.3.6.1.4.1.20301.2.7.18.1.2.3.8.1.8Columndot3RateStatsLateCollisionsread-onlycurrentThe number of times per second that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet.
1.3.6.1.4.1.20301.2.7.18.1.2.3.8.1.9Columndot3RateStatsExcessiveCollisionsread-onlycurrentA count per second of frames for which transmission on a particular interface fails due to excessive collisions.
1.3.6.1.4.1.20301.2.7.18.1.2.3.8.1.10Columndot3RateStatsInternalMacTransmitErrorsread-onlycurrentA count per second of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error.
1.3.6.1.4.1.20301.2.7.18.1.2.3.8.1.12Columndot3RateStatsFrameTooLongsread-onlycurrentA count per second of frames received on a particular interface that exceed the maximum permitted frame size.
1.3.6.1.4.1.20301.2.7.18.1.2.3.8.1.13Columndot3RateStatsInternalMacReceiveErrorsread-onlycurrentA count per second of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error.
1.3.6.1.4.1.20301.2.7.18.1.2.3.8.1.14Columndot3RatePortAliasread-onlycurrentThe port alias.
1.3.6.1.4.1.20301.2.7.18.1.2.3.9TableportQoSCounterTablenot-accessiblecurrentThe table for QoS counters.
1.3.6.1.4.1.20301.2.7.18.1.2.3.9.1RowportQoSCounterTableEntrynot-accessiblecurrentA row in the port QoS table.
1.3.6.1.4.1.20301.2.7.18.1.2.3.9.1.1ColumnportQoSIndexread-onlycurrentThe index of the port
1.3.6.1.4.1.20301.2.7.18.1.2.3.9.1.2ColumnqueueQoSIndexread-onlycurrentThe index of the queue per port.
1.3.6.1.4.1.20301.2.7.18.1.2.3.9.1.3ColumntxPacketsread-onlycurrentThe total Tx packets.
1.3.6.1.4.1.20301.2.7.18.1.2.3.9.1.4ColumndroppedPacketsread-onlycurrentThe dropped packets.
1.3.6.1.4.1.20301.2.7.18.1.2.3.9.1.5ColumntxBytesread-onlycurrentThe total Tx bytes.
1.3.6.1.4.1.20301.2.7.18.1.2.3.9.1.6ColumndroppedBytesread-onlycurrentThe dropped bytes.
1.3.6.1.4.1.20301.2.7.18.1.2.3.9.1.7ColumntxPacketsRateread-onlycurrentThe Tx packets rate.
1.3.6.1.4.1.20301.2.7.18.1.2.3.9.1.8ColumndroppedPacketsRateread-onlycurrentThe dropped packets rate.
1.3.6.1.4.1.20301.2.7.18.1.2.3.9.1.9ColumntxBytesRateread-onlycurrentThe Tx bytes rate.
1.3.6.1.4.1.20301.2.7.18.1.2.3.9.1.10ColumndroppedBytesRateread-onlycurrentThe dropped bytes rate.
1.3.6.1.4.1.20301.2.7.18.1.2.3.9.1.11ColumnportAliasread-onlycurrentThe port alias.
1.3.6.1.4.1.20301.2.7.18.1.2.7NodeagClearStats
1.3.6.1.4.1.20301.2.7.18.1.2.7.1ScalarsnmpClearStatsread-writecurrentSetting this to clear(2) results in clearing the SNMP statistics.
1.3.6.1.4.1.20301.2.7.18.1.2.9NodentpStats
1.3.6.1.4.1.20301.2.7.18.1.2.9.1ScalarntpPrimaryServerReqSentread-onlycurrentThe total number of NTP requests sent to Primary NTP Server.
1.3.6.1.4.1.20301.2.7.18.1.2.9.2ScalarntpPrimaryServerRespRcvdread-onlycurrentThe total number of NTP responces received from Primary NTP Server.
1.3.6.1.4.1.20301.2.7.18.1.2.9.3ScalarntpPrimaryServerUpdatesread-onlycurrentThe total number of NTP Updates by Primary NTP Server.
1.3.6.1.4.1.20301.2.7.18.1.2.9.4ScalarntpSecondaryServerReqSentread-onlycurrentThe total number of NTP requests sent to Secondary NTP Server.
1.3.6.1.4.1.20301.2.7.18.1.2.9.5ScalarntpSecondaryServerRespRcvdread-onlycurrentThe total number of NTP responces received from Secondary NTP Server.
1.3.6.1.4.1.20301.2.7.18.1.2.9.6ScalarntpSecondaryServerUpdatesread-onlycurrentThe total number of NTP Updates by Secondary NTP Server.
1.3.6.1.4.1.20301.2.7.18.1.2.9.7ScalarntpLastUpdateServerread-onlycurrentThe type of ntp server updated last time.
1.3.6.1.4.1.20301.2.7.18.1.2.9.8ScalarntpLastUpdateTimeread-onlycurrentThe last time updated by ntp server.
1.3.6.1.4.1.20301.2.7.18.1.2.9.9ScalarntpClearStatsread-writecurrentSetting this value to clear(2) clears the stats for ntp.
1.3.6.1.4.1.20301.2.7.18.1.2.9.10ScalarntpSystemCurrentTimeread-onlycurrentThe current system time.
1.3.6.1.4.1.20301.2.7.18.1.2.11NodeaclStats
1.3.6.1.4.1.20301.2.7.18.1.2.11.1TableaclStatsTablenot-accessiblecurrentThe table of ACL statistics.
1.3.6.1.4.1.20301.2.7.18.1.2.11.1.1RowaclStatsTableEntrynot-accessiblecurrentStatistics about a particular ACL configuration entry.
1.3.6.1.4.1.20301.2.7.18.1.2.11.1.1.1ColumnaclStatsIndexread-onlycurrentThe acl index.
1.3.6.1.4.1.20301.2.7.18.1.2.11.1.1.2ColumnaclStatsHitsread-onlycurrentTotal number of hits for this ACL entry
1.3.6.1.4.1.20301.2.7.18.1.2.11.1.1.3ColumnaclClearStatsread-writecurrentSetting this value to clear(2) clears the stats for the ACL.
1.3.6.1.4.1.20301.2.7.18.1.2.11.3Tableacl6StatsTablenot-accessiblecurrentThe table of IPv6 ACL statistics.
1.3.6.1.4.1.20301.2.7.18.1.2.11.3.1Rowacl6StatsTableEntrynot-accessiblecurrentStatistics about a particular IPv6 ACL configuration entry.
1.3.6.1.4.1.20301.2.7.18.1.2.11.3.1.1Columnacl6StatsIndexread-onlycurrentThe ipv6 acl index.
1.3.6.1.4.1.20301.2.7.18.1.2.11.3.1.2Columnacl6StatsHitsread-onlycurrentTotal number of hits for this IPv6 ACL entry
1.3.6.1.4.1.20301.2.7.18.1.2.11.3.1.3Columnacl6ClearStatsread-writecurrentSetting this value to clear(2) clears the stats for the IPv6 ACL.
1.3.6.1.4.1.20301.2.7.18.1.2.11.4TablemAclStatsTablenot-accessiblecurrentThe table of MACL statistics.
1.3.6.1.4.1.20301.2.7.18.1.2.11.4.1RowmAclStatsTableEntrynot-accessiblecurrentStatistics about a particular MACL configuration entry.
1.3.6.1.4.1.20301.2.7.18.1.2.11.4.1.1ColumnmAclStatsIndexread-onlycurrentThe macl index.
1.3.6.1.4.1.20301.2.7.18.1.2.11.4.1.2ColumnmAclStatsHitsread-onlycurrentTotal number of hits for this MACL entry
1.3.6.1.4.1.20301.2.7.18.1.2.11.4.1.3ColumnmAclClearStatsread-writecurrentSetting this value to clear(2) clears the stats for the MACL.
1.3.6.1.4.1.20301.2.7.18.1.2.12NodememoryStats
1.3.6.1.4.1.20301.2.7.18.1.2.12.1ScalartotalMemoryStatsread-onlycurrentThe total memory in bytes.
1.3.6.1.4.1.20301.2.7.18.1.2.12.2ScalarmemoryFreeStatsread-onlycurrentThe free memory in bytes.
1.3.6.1.4.1.20301.2.7.18.1.2.12.3ScalarmemorySharedStatsread-onlycurrentThe shared memory in bytes.
1.3.6.1.4.1.20301.2.7.18.1.2.12.4ScalarmemoryBufferStatsread-onlycurrentThe buffer memory in bytes.
1.3.6.1.4.1.20301.2.7.18.1.2.12.5ScalarswapTotalStatsread-onlycurrentThe total swap memory in bytes.
1.3.6.1.4.1.20301.2.7.18.1.2.12.6ScalarswapFreeStatsread-onlycurrentThe free swap memory in bytes.
1.3.6.1.4.1.20301.2.7.18.1.2.12.7ScalarhighTotalStatsread-onlycurrentThe total high memory in bytes.
1.3.6.1.4.1.20301.2.7.18.1.2.12.8ScalarhighFreeStatsread-onlycurrentThe free high memory in bytes.
1.3.6.1.4.1.20301.2.7.18.1.2.20NodesnmpStats
1.3.6.1.4.1.20301.2.7.18.1.2.20.1ScalarnsnmpInPktsread-onlycurrentsnmpInPkts
1.3.6.1.4.1.20301.2.7.18.1.2.20.2ScalarnsnmpInBadCommunityNamesread-onlycurrentsnmpInBadCommunityNames
1.3.6.1.4.1.20301.2.7.18.1.2.20.3ScalarnsnmpInASNParseErrsread-onlycurrentsnmpInASNParseErrs
1.3.6.1.4.1.20301.2.7.18.1.2.20.4ScalarnsnmpOutPktsread-onlycurrentsnmpOutPkts
1.3.6.1.4.1.20301.2.7.18.1.2.20.5ScalarnsnmpInTooBigsread-onlycurrentsnmpInTooBigs
1.3.6.1.4.1.20301.2.7.18.1.2.20.6ScalarnsnmpInBadValuesread-onlycurrentsnmpInBadValues
1.3.6.1.4.1.20301.2.7.18.1.2.20.7ScalarnsnmpInGenErrsread-onlycurrentsnmpInGenErrs
1.3.6.1.4.1.20301.2.7.18.1.2.20.8ScalarnsnmpInTotalSetVarsread-onlycurrentsnmpInTotalSetVars
1.3.6.1.4.1.20301.2.7.18.1.2.20.9ScalarnsnmpInGetNextsread-onlycurrentsnmpInGetNexts
1.3.6.1.4.1.20301.2.7.18.1.2.20.10ScalarnsnmpInGetResponsesread-onlycurrentsnmpInGetResponses
1.3.6.1.4.1.20301.2.7.18.1.2.20.11ScalarnsnmpOutTooBigsread-onlycurrentsnmpOutTooBigs
1.3.6.1.4.1.20301.2.7.18.1.2.20.12ScalarnsnmpOutBadValuesread-onlycurrentsnmpOutBadValues
1.3.6.1.4.1.20301.2.7.18.1.2.20.13ScalarnsnmpOutGenErrsread-onlycurrentsnmpOutGenErrs
1.3.6.1.4.1.20301.2.7.18.1.2.20.14ScalarnsnmpOutGetNextsread-onlycurrentsnmpOutGetNexts
1.3.6.1.4.1.20301.2.7.18.1.2.20.15ScalarnsnmpOutGetResponsesread-onlycurrentsnmpOutGetResponses
1.3.6.1.4.1.20301.2.7.18.1.2.20.16ScalarnsnmpSilentDropsread-onlycurrentsnmpSilentDrops
1.3.6.1.4.1.20301.2.7.18.1.2.20.17ScalarnsnmpInBadVersionsread-onlycurrentsnmpInBadVersions
1.3.6.1.4.1.20301.2.7.18.1.2.20.18ScalarnsnmpInBadCommunityUsesread-onlycurrentsnmpInBadCommunityUses
1.3.6.1.4.1.20301.2.7.18.1.2.20.19ScalarnsnmpEnableAuthTrapsread-onlycurrentsnmpEnableAuthTraps
1.3.6.1.4.1.20301.2.7.18.1.2.20.20ScalarnsnmpInBadTypesread-onlycurrentsnmpInBadTypes
1.3.6.1.4.1.20301.2.7.18.1.2.20.21ScalarnsnmpInNoSuchNamesread-onlycurrentsnmpInNoSuchNames
1.3.6.1.4.1.20301.2.7.18.1.2.20.22ScalarnsnmpInReadOnlysread-onlycurrentsnmpInReadOnlys
1.3.6.1.4.1.20301.2.7.18.1.2.20.23ScalarnsnmpInTotalReqVarsread-onlycurrentsnmpInTotalReqVars
1.3.6.1.4.1.20301.2.7.18.1.2.20.24ScalarnsnmpInGetRequestsread-onlycurrentsnmpInGetRequests
1.3.6.1.4.1.20301.2.7.18.1.2.20.25ScalarnsnmpInSetRequestsread-onlycurrentsnmpInSetRequests
1.3.6.1.4.1.20301.2.7.18.1.2.20.26ScalarnsnmpInTrapsread-onlycurrentsnmpInTraps
1.3.6.1.4.1.20301.2.7.18.1.2.20.27ScalarnsnmpOutNoSuchNamesread-onlycurrentsnmpOutNoSuchNames
1.3.6.1.4.1.20301.2.7.18.1.2.20.28ScalarnsnmpOutReadOnlysread-onlycurrentsnmpOutReadOnlys
1.3.6.1.4.1.20301.2.7.18.1.2.20.29ScalarnsnmpOutGetRequestsread-onlycurrentsnmpOutGetRequests
1.3.6.1.4.1.20301.2.7.18.1.2.20.30ScalarnsnmpOutSetRequestsread-onlycurrentsnmpOutSetRequests
1.3.6.1.4.1.20301.2.7.18.1.2.20.31ScalarnsnmpOutTrapsread-onlycurrentsnmpOutTraps
1.3.6.1.4.1.20301.2.7.18.1.2.20.32ScalarnsnmpProxyDropsread-onlycurrentsnmpProxyDrops
1.3.6.1.4.1.20301.2.7.18.1.2.21NodempTcbStats
1.3.6.1.4.1.20301.2.7.18.1.2.21.1TabletcpControlBlocksTablenot-accessiblecurrentAll TCP allocated control blocks
1.3.6.1.4.1.20301.2.7.18.1.2.21.1.1RowtcpControlBlocksTableEntrynot-accessiblecurrentA row in the TCP control blocks table.
1.3.6.1.4.1.20301.2.7.18.1.2.21.1.1.1ColumntcpControlBlocksIndxread-onlycurrentThe TCP blocks index.
1.3.6.1.4.1.20301.2.7.18.1.2.21.1.1.2ColumndestAddrread-onlycurrentThe TCP block destination address.
1.3.6.1.4.1.20301.2.7.18.1.2.21.1.1.3ColumnremotePortread-onlycurrentTcp informations concerning the remote port
1.3.6.1.4.1.20301.2.7.18.1.2.21.1.1.4ColumnsourceAddrread-onlycurrentIP address of the source of the Tcp block
1.3.6.1.4.1.20301.2.7.18.1.2.21.1.1.5ColumnlocalPortread-onlycurrentTcp informations concerning the local port
1.3.6.1.4.1.20301.2.7.18.1.2.21.1.1.6Columnstateread-onlycurrentThe state of the Tcp
1.3.6.1.4.1.20301.2.7.18.1.2.21.1.1.7ColumnportTyperead-onlycurrentThe type of the local port
1.3.6.1.4.1.20301.2.7.18.1.2.21.1.1.8ColumnportStateread-onlycurrentThe state of the local port
1.3.6.1.4.1.20301.2.7.18.1.2.21.2TabletcpMGMTControlBlocksTablenot-accessiblecurrentAll TCP allocated control blocks on MGMT port
1.3.6.1.4.1.20301.2.7.18.1.2.21.2.1RowtcpMGMTTableEntrynot-accessiblecurrentA row in the TCP on MGMT port table.
1.3.6.1.4.1.20301.2.7.18.1.2.21.2.1.1ColumntcpMGMTIndxread-onlycurrentIndex in the tcpMGMTControlBlocksTable table.
1.3.6.1.4.1.20301.2.7.18.1.2.21.2.1.2ColumnrecvQread-onlycurrentThe size of the received TCP queue.
1.3.6.1.4.1.20301.2.7.18.1.2.21.2.1.3ColumnsentQread-onlycurrentThe size of the sent TCP blocks queue.
1.3.6.1.4.1.20301.2.7.18.1.2.21.2.1.4ColumnlocalAddressread-onlycurrentThe local address for the TCP.
1.3.6.1.4.1.20301.2.7.18.1.2.21.2.1.5ColumnforeignAddressread-onlycurrentThe remote address for the TCP.
1.3.6.1.4.1.20301.2.7.18.1.2.21.2.1.6ColumnstateMgmtread-onlycurrentThe port's state.
1.3.6.1.4.1.20301.2.7.18.1.2.22NodempUdpStats
1.3.6.1.4.1.20301.2.7.18.1.2.22.1TableudpControlBlocksTablenot-accessiblecurrentAll UDP control blocks in use
1.3.6.1.4.1.20301.2.7.18.1.2.22.1.1RowudpControlBlocksTableEntrynot-accessiblecurrentA row in the UDP control blocks table.
1.3.6.1.4.1.20301.2.7.18.1.2.22.1.1.1ColumnudpMpLocalPortread-onlycurrentThe current UDP local port.
1.3.6.1.4.1.20301.2.7.18.1.2.22.1.1.2ColumnudpMpStateread-onlycurrentThe port's state.
1.3.6.1.4.1.20301.2.7.18.1.2.22.2TableudpMGMTControlBlocksTablenot-accessiblecurrentAll UDP control blocks allocated on MGMT port
1.3.6.1.4.1.20301.2.7.18.1.2.22.2.1RowudpMGMTTableEntrynot-accessiblecurrentA row in the UDP on MGMT port table.
1.3.6.1.4.1.20301.2.7.18.1.2.22.2.1.1ColumnudpMGMTIndxread-onlycurrentIndex in the udpMGMTControlBlocksTable table.
1.3.6.1.4.1.20301.2.7.18.1.2.22.2.1.2ColumnrecvQUdpread-onlycurrentThe size of the received UDP queue.
1.3.6.1.4.1.20301.2.7.18.1.2.22.2.1.3ColumnsentQUdpread-onlycurrentThe size of the sent UDP blocks queue.
1.3.6.1.4.1.20301.2.7.18.1.2.22.2.1.4ColumnlocalAddressUdpread-onlycurrentThe local address for the UDP.
1.3.6.1.4.1.20301.2.7.18.1.2.22.2.1.5ColumnforeignAddressUdpread-onlycurrentThe remote address for the UDP.
1.3.6.1.4.1.20301.2.7.18.1.2.22.2.1.6ColumnstateMgmtUdpread-onlycurrentThe port's state.
1.3.6.1.4.1.20301.2.7.18.1.3NodeagentInfo
1.3.6.1.4.1.20301.2.7.18.1.3.1Nodehardware
1.3.6.1.4.1.20301.2.7.18.1.3.1.1ScalarhwPartNumberread-onlycurrentThe hardware part number of the Switch.
1.3.6.1.4.1.20301.2.7.18.1.3.1.12ScalarhwFanStatusread-onlycurrentThe fan status on the system.
1.3.6.1.4.1.20301.2.7.18.1.3.1.13ScalarhwFanSpeedread-onlycurrentThe fan speed on the system.
1.3.6.1.4.1.20301.2.7.18.1.3.1.14ScalarhwTempSensorsread-onlycurrentThe temperature sensors on the system.
1.3.6.1.4.1.20301.2.7.18.1.3.1.15ScalarhwGlobalHealthStatusread-onlycurrentThis variable summarizes the statuses of several key elements of the device. OK: - All temperature sensors are below the warning threshold (eg. < 85 C); - All …
1.3.6.1.4.1.20301.2.7.18.1.3.1.40ScalarhwESNread-onlycurrentThe ESN of the switch.
1.3.6.1.4.1.20301.2.7.18.1.3.1.42ScalarhwMTMread-onlycurrentThe Machine Type Model (MTM) of the system
1.3.6.1.4.1.20301.2.7.18.1.3.2NodeportInfo
1.3.6.1.4.1.20301.2.7.18.1.3.2.1TableportInfoTablenot-accessiblecurrentThe table of port information.
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1RowportInfoTableEntrynot-accessiblecurrentA row in the port information table.
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.1ColumnportInfoIndxread-onlycurrentThe port index.
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.2ColumnportInfoSpeedread-onlycurrentThe current operational speed of the port.
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.3ColumnportInfoModeread-onlycurrentThe current operational mode of the port.
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.4ColumnportInfoFlowCtrlread-onlycurrentThe current operational flow control of the port.
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.5ColumnportInfoLinkread-onlycurrentThe current operational link status of the port.
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.6ColumnportInfoPhyIfDescrread-onlycurrentA textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the h…
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.7ColumnportInfoPhyIfTyperead-onlycurrentThe type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.8ColumnportInfoPhyIfMturead-onlycurrentThe size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagr…
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.9ColumnportInfoPhyIfPhysAddressread-onlycurrentThe interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.…
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.10ColumnportInfoPhyIfOperStatusread-onlycurrentThe current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.11ColumnportInfoPhyIfLastChangeread-onlycurrentThe value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization o…
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.18ColumnportInfoLearningread-onlycurrentThe port L2 (FDB) Learning state.
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.20ColumnportInfoBpduGuardread-onlycurrentThe operational status of BPDU Guard on the port.
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.21ColumnportInfoPvidread-onlycurrentThis is the operational port vlan-id of the port. Typically, the value of this object is the same as the value of the agPortCurCfgPVID object. But if, for exam…
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.22ColumnportInfoVlanTagread-onlycurrentThis is the operational VLAN tag state of the port. Typically, the value of this object is the same as the value of the agPortCurCfgVlanTag objec. But if, for …
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.23ColumnportInfoErrDisableRecoveryread-onlycurrentThis object indicates whether the system will automatically re-enable an error-disabled port after the time interval indicated by agCurCfgErrDisableTimeout has…
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.24ColumnportInfoErrDisableTimeLeftread-onlycurrentIf the portInfoErrDisableRecovery object has a value of 'enable' and the portInfoLink object has a value of 'errdisabled', the value of this object indicates t…
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.25ColumnportInfoExtGuardread-onlycurrentThe operational status of STP Loop/Root Guard on the port.
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.26ColumnportInfoLFDStateread-onlycurrentThis object indicates whether the port is error-disabled due to excessive link flaps. The value of this object is 'yes' if the port is error-disabled due to ex…
1.3.6.1.4.1.20301.2.7.18.1.3.2.1.1.27ColumnportInfoAliasread-onlycurrentThe alias of the row in portInfo configuration table.
1.3.6.1.4.1.20301.2.7.18.1.3.4NodeagDiff
1.3.6.1.4.1.20301.2.7.18.1.3.4.2ScalaragDiffStateread-writecurrentWhen this object is read the current state is returned. idle(3) indicates that there is no diff in progess. complete(5) indicates that the last diff operation …
1.3.6.1.4.1.20301.2.7.18.1.3.4.3ScalaragDiffTableSizeread-onlycurrentThe number of strings in the diff table.
1.3.6.1.4.1.20301.2.7.18.1.3.4.4TableagDiffTablenot-accessiblecurrentThe table of diff strings.
1.3.6.1.4.1.20301.2.7.18.1.3.4.4.1RowagDiffTableEntrynot-accessiblecurrentAn entry in the diff table.
1.3.6.1.4.1.20301.2.7.18.1.3.4.4.1.1ColumnagDiffIndexread-onlycurrentThe table index.
1.3.6.1.4.1.20301.2.7.18.1.3.4.4.1.2ColumnagDiffStringread-onlycurrentA string in the diff table.
1.3.6.1.4.1.20301.2.7.18.1.3.5NodeagCfgDump
1.3.6.1.4.1.20301.2.7.18.1.3.5.2ScalaragCfgDumpStateread-writecurrentWhen this object is read the current state is returned. idle(2) indicates that there is no dump in progess. complete(4) indicates that the last dump operation …
1.3.6.1.4.1.20301.2.7.18.1.3.5.3ScalaragCfgDumpTableSizeread-onlycurrentThe number of strings in the dump table.
1.3.6.1.4.1.20301.2.7.18.1.3.5.4TableagCfgDumpTablenot-accessiblecurrentThe table of dump strings.
1.3.6.1.4.1.20301.2.7.18.1.3.5.4.1RowagCfgDumpTableEntrynot-accessiblecurrentAn entry in the dump table.
1.3.6.1.4.1.20301.2.7.18.1.3.5.4.1.1ColumnagCfgDumpIndexread-onlycurrentThe table index.
1.3.6.1.4.1.20301.2.7.18.1.3.5.4.1.2ColumnagCfgDumpStringread-onlycurrentA string in the dump table.
1.3.6.1.4.1.20301.2.7.18.1.3.9NodegeaportInfo
1.3.6.1.4.1.20301.2.7.18.1.3.9.1TablegeaportInfoTablenot-accessiblecurrentThe table of gea port mapping.
1.3.6.1.4.1.20301.2.7.18.1.3.9.1.1RowgeaportInfoTableEntrynot-accessiblecurrentAn entry in the geaport table mapping.
1.3.6.1.4.1.20301.2.7.18.1.3.9.1.1.1ColumngeaportInfoLogicalIndexread-onlycurrentThe logical port index.
1.3.6.1.4.1.20301.2.7.18.1.3.9.1.1.2ColumngeaportInfoAliasread-onlycurrentThe GEA Port Alias.
1.3.6.1.4.1.20301.2.7.18.1.3.9.1.1.3ColumngeaportInfoPortread-onlycurrentThe GEA Port (0-based).
1.3.6.1.4.1.20301.2.7.18.1.3.9.1.1.4ColumngeaportInfoUnitread-onlycurrentThe GEA Unit.
1.3.6.1.4.1.20301.2.7.18.1.3.11NodesfpInfo
1.3.6.1.4.1.20301.2.7.18.1.3.11.1TablesfpInfoTablenot-accessiblecurrentThe table of external port SFP information.
1.3.6.1.4.1.20301.2.7.18.1.3.11.1.1RowsfpInfoTableEntrynot-accessiblecurrentA row in the external port SFP information table.
1.3.6.1.4.1.20301.2.7.18.1.3.11.1.1.1ColumnsfpInfoIndxread-onlycurrentThe external port SFX index.
1.3.6.1.4.1.20301.2.7.18.1.3.11.1.1.2ColumnsfpInfoPortAliasread-onlycurrentExternal Port SFP/XFP alias.
1.3.6.1.4.1.20301.2.7.18.1.3.11.1.1.3ColumnsfpInfoDeviceread-onlycurrentExternal Port SFP/XFP Device.
1.3.6.1.4.1.20301.2.7.18.1.3.11.1.1.4ColumnsfpInfoTXEnableread-onlycurrentExternal Port SFP/XFP TX-Enable.
1.3.6.1.4.1.20301.2.7.18.1.3.11.1.1.5ColumnsfpInfoRXSignalread-onlycurrentExternal Port SFP/XFP RX-Signal.
1.3.6.1.4.1.20301.2.7.18.1.3.11.1.1.6ColumnsfpInfoTXFaultread-onlycurrentExternal Port SFP/XFP TX-Fault.
1.3.6.1.4.1.20301.2.7.18.1.3.11.1.1.7ColumnsfpInfoApprovedread-onlycurrentExternal Port SFP/XFP Approval.
1.3.6.1.4.1.20301.2.7.18.1.3.11.1.1.8ColumnsfpInfoVendorread-onlycurrentExternal Port SFP/XFP device vendor.
1.3.6.1.4.1.20301.2.7.18.1.3.11.1.1.9ColumnsfpInfoSerialread-onlycurrentExternal Port SFP/XFP device serial.
1.3.6.1.4.1.20301.2.7.18.1.3.13NodeaccessInfo
1.3.6.1.4.1.20301.2.7.18.1.3.13.1ScalaraccessInfoClearAllUserFailAttemptsread-writecurrentAction Object. When set to clear(2),clears all the unsuccessful attempts of users. Otherwise nothing is done. ok(1) is returned always when read.
1.3.6.1.4.1.20301.2.7.18.1.3.13.2ScalaraccessInfoClearAllUserLocksread-writecurrentAction Object. When set to clear(2), Unlock all locked users. Otherwise nothing is done. ok(1) is returned always when read.
1.3.6.1.4.1.20301.2.7.18.1.3.13.3TableaccessUserInfoTablenot-accessiblecurrentThe table of user information.
1.3.6.1.4.1.20301.2.7.18.1.3.13.3.1RowaccessUserInfoTableEntrynot-accessiblecurrentAn entry in the user information table.
1.3.6.1.4.1.20301.2.7.18.1.3.13.3.1.1ColumnaccessUserInfoIndexread-onlycurrentThe table index. The index value corresponds to the same value of agAccessUserCurCfgUId for the user.
1.3.6.1.4.1.20301.2.7.18.1.3.13.3.1.2ColumnaccessUserInfoLockStateread-onlycurrentLock State of a specific user, unlocked(1) or locked(2). When the state is locked the user is not allowed to login until the account is unlocked by the adminis…
1.3.6.1.4.1.20301.2.7.18.1.3.13.3.1.3ColumnaccessUserInfoClearFailAttemptsread-writecurrentAction Object. When set to clear(2), clears the unsuccessful attempts of a particular user. Otherwise nothing is done. ok(1) is returned always when read.
1.3.6.1.4.1.20301.2.7.18.1.3.13.3.1.4ColumnaccessUserInfoClearLockread-writecurrentAction Object. When set to clear(2), unlock a particular user. Otherwise nothing is done. ok(1) is returned always when read.
1.3.6.1.4.1.20301.2.7.18.1.4NodeagentOper
1.3.6.1.4.1.20301.2.7.18.1.4.1TableagPortOperTablenot-accessiblecurrentThe table of port operations.
1.3.6.1.4.1.20301.2.7.18.1.4.1.1RowagPortOperTableEntrynot-accessiblecurrentA row in the port operations table.
1.3.6.1.4.1.20301.2.7.18.1.4.1.1.1ColumnportOperIdxread-onlycurrentThe port index.
1.3.6.1.4.1.20301.2.7.18.1.4.1.1.2ColumnportOperStateread-writecurrentEnable/Disable port.
1.3.6.1.4.1.20301.2.7.18.1.4.1.1.3ColumnportOperRmonread-writecurrentEnable/Disable RMON for port.
1.3.6.1.4.1.20301.2.7.18.1.4.1.1.4ColumnportOperLearningread-writecurrentEnable/Disable L2 (FDB) Learning for this port.
1.3.6.1.4.1.20301.2.7.18.1.4.1.1.5ColumnportOperAliasread-onlycurrentThe port alias..
1.3.6.1.4.1.20301.2.7.18.1.4.2NodeagNTPOper
1.3.6.1.4.1.20301.2.7.18.1.4.2.1ScalarntpOperSendReqread-writecurrentAllows the user to send requests to the NTP server.
1.3.6.1.4.1.20301.2.7.18.1.4.4TableportOperDot1xTablenot-accessiblecurrentThe table of port operations.
1.3.6.1.4.1.20301.2.7.18.1.4.4.1RowportOperDot1xTableEntrynot-accessiblecurrentA row in the port 802.1x operation table.
1.3.6.1.4.1.20301.2.7.18.1.4.4.1.1ColumnportOperDot1xIndxread-onlycurrentThe port index.
1.3.6.1.4.1.20301.2.7.18.1.4.4.1.2ColumnportOperDot1xResetread-writecurrentReinitialize 802.1x access control on port.
1.3.6.1.4.1.20301.2.7.18.1.4.4.1.3ColumnportOperDot1xReauthread-writecurrentInitiate reauthentication on port.
1.3.6.1.4.1.20301.2.7.18.1.4.4.1.4ColumnportOperDot1xPortAliasread-onlycurrentThe port alias.
1.3.6.1.4.1.20301.2.7.18.1.4.5NodeagSrvLedOper
1.3.6.1.4.1.20301.2.7.18.1.4.5.1ScalarsrvLedOperread-writecurrentEnable/disable Service Required LED.
1.3.6.1.4.1.20301.2.7.18.2Nodelayer2
1.3.6.1.4.1.20301.2.7.18.2.1Nodelayer2Configs
1.3.6.1.4.1.20301.2.7.18.2.1.1Nodevlan
1.3.6.1.4.1.20301.2.7.18.2.1.1.1ScalarvlanMaxEntread-onlycurrentThe maximum number of rows in the VLAN configuration table.
1.3.6.1.4.1.20301.2.7.18.2.1.1.2TablevlanCurCfgTablenot-accessiblecurrentThe table of VLAN configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.1.2.1RowvlanCurCfgTableEntrynot-accessiblecurrentA row in the VLAN configuration table.
1.3.6.1.4.1.20301.2.7.18.2.1.1.2.1.1ColumnvlanCurCfgVlanIdread-onlycurrentThe VLAN identifier.
1.3.6.1.4.1.20301.2.7.18.2.1.1.2.1.2ColumnvlanCurCfgPortsread-onlycurrentThe port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || ||…
1.3.6.1.4.1.20301.2.7.18.2.1.1.2.1.3ColumnvlanCurCfgStateread-onlycurrentEnable or disable a VLAN
1.3.6.1.4.1.20301.2.7.18.2.1.1.2.1.5ColumnvlanCurCfgStgread-onlycurrentThe Spanning Tree Group for the VLAN.
1.3.6.1.4.1.20301.2.7.18.2.1.1.2.1.9ColumnvlanCurCfgVlanNameread-onlycurrentThe VLAN name.
1.3.6.1.4.1.20301.2.7.18.2.1.1.2.1.10ColumnvlanCurCfgPrVlanTyperead-onlycurrentThe type of the Private VLAN.
1.3.6.1.4.1.20301.2.7.18.2.1.1.2.1.11ColumnvlanCurCfgPrVlanMapPriIdread-onlycurrentThe primary vlan id
1.3.6.1.4.1.20301.2.7.18.2.1.1.3TablevlanNewCfgTablenot-accessiblecurrentThe table of VLAN configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.1.3.1RowvlanNewCfgTableEntrynot-accessiblecurrentA row in the VLAN configuration table.
1.3.6.1.4.1.20301.2.7.18.2.1.1.3.1.1ColumnvlanNewCfgVlanIdread-onlycurrentThe VLAN identifier.
1.3.6.1.4.1.20301.2.7.18.2.1.1.3.1.2ColumnvlanNewCfgVlanNameread-createcurrentThe VLAN name.
1.3.6.1.4.1.20301.2.7.18.2.1.1.3.1.3ColumnvlanNewCfgPortsread-onlycurrentThe port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || ||…
1.3.6.1.4.1.20301.2.7.18.2.1.1.3.1.4ColumnvlanNewCfgStateread-createcurrentEnable or disable a VLAN
1.3.6.1.4.1.20301.2.7.18.2.1.1.3.1.5ColumnvlanNewCfgAddPortIndexread-createcurrentThe port to be added to the specified VLAN. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.1.3.1.6ColumnvlanNewCfgRemovePortIndexread-createcurrentThe port to be removed from the specified VLAN. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.1.3.1.7ColumnvlanNewCfgDeleteread-createcurrentThis is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN
1.3.6.1.4.1.20301.2.7.18.2.1.1.3.1.9ColumnvlanNewCfgStgread-createcurrentThe Spanning Tree Group for the VLAN.
1.3.6.1.4.1.20301.2.7.18.2.1.1.3.1.13ColumnvlanNewCfgPrVlanTyperead-writecurrentThe type of the Private VLAN.
1.3.6.1.4.1.20301.2.7.18.2.1.1.3.1.14ColumnvlanNewCfgPrVlanMapPriIdread-writecurrentThe primary vlan id. To delete set 0.
1.3.6.1.4.1.20301.2.7.18.2.1.1.3.1.28ColumnvlanNewCfgAddPortAliasread-writecurrentThe port alias to be added to the specified VLAN. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.1.3.1.29ColumnvlanNewCfgRemovePortAliasread-writecurrentThe port alias to be removed from the specified VLAN. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.1.4ScalarvlanMaxVlanIDread-onlycurrentThe maximum allowed VLAN ID.
1.3.6.1.4.1.20301.2.7.18.2.1.1.5TablepvlanCurCfgTablenot-accessiblecurrentThe table of PROTOCOL VLAN configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.1.5.1RowpvlanCurCfgTableEntrynot-accessiblecurrentA row in the Protocol VLAN configuration table.
1.3.6.1.4.1.20301.2.7.18.2.1.1.5.1.1ColumnpvlanCurCfgVlanIdread-onlycurrentThe VLAN identifier.
1.3.6.1.4.1.20301.2.7.18.2.1.1.5.1.2ColumnpvlanCurCfgPvlanIdread-onlycurrentThe PVLAN identifier.
1.3.6.1.4.1.20301.2.7.18.2.1.1.5.1.3ColumnpvlanCurCfgPvlanFrameTyperead-onlycurrentThe frame type of the PVLAN.
1.3.6.1.4.1.20301.2.7.18.2.1.1.5.1.4ColumnpvlanCurCfgPvlanEtherTyperead-onlycurrentThe Ether type of the PVLAN.
1.3.6.1.4.1.20301.2.7.18.2.1.1.5.1.5ColumnpvlanCurCfgPvlanPortsread-onlycurrentThe port list in the PVLAN. The ports are presented in bitmap format.
1.3.6.1.4.1.20301.2.7.18.2.1.1.5.1.6ColumnpvlanCurCfgPvlanPrioread-onlycurrentThe priority of the PVLAN.
1.3.6.1.4.1.20301.2.7.18.2.1.1.5.1.7ColumnpvlanCurCfgPvlanStateread-onlycurrentEnable or disable a PVLAN.
1.3.6.1.4.1.20301.2.7.18.2.1.1.5.1.8ColumnpvlanCurCfgPvlanTagPortsread-onlycurrentThe list of tagged-PVLAN ports. The ports are presented in bitmap format.
1.3.6.1.4.1.20301.2.7.18.2.1.1.5.1.9ColumnpvlanCurCfgPvlanPredefProtoread-onlycurrentA predefined Protocol (setting EtherType and FrameType to predefined values).
1.3.6.1.4.1.20301.2.7.18.2.1.1.6TablepvlanNewCfgTablenot-accessiblecurrentThe table of PROTOCOL VLAN configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1RowpvlanNewCfgTableEntrynot-accessiblecurrentA row in the Protocol VLAN configuration table.
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1.1ColumnpvlanNewCfgVlanIdread-onlycurrentThe VLAN identifier.
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1.2ColumnpvlanNewCfgPvlanIdread-writecurrentThe PVLAN identifier.
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1.3ColumnpvlanNewCfgPvlanFrameTyperead-writecurrentThe frame type of the PVLAN.
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1.4ColumnpvlanNewCfgPvlanEtherTyperead-writecurrentThe Ehter type of the PVLAN.
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1.5ColumnpvlanNewCfgPvlanAddPortIndexread-writecurrentThe port to be added to the specified PVLAN. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1.6ColumnpvlanNewCfgPvlanRemovePortIndexread-writecurrentThe port to be removed to the specified PVLAN. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1.7ColumnpvlanNewCfgPvlanPrioread-writecurrentThe priority of the PVLAN.
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1.8ColumnpvlanNewCfgPvlanStateread-writecurrentEnable or disable a PVLAN
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1.9ColumnpvlanNewCfgPvlanTagPortIndexread-writecurrentThe port to be tagged for the specified PVLAN. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1.10ColumnpvlanNewCfgPvlanUntagPortIndexread-writecurrentThe port to be untagged for the specified PVLAN. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1.11ColumnpvlanNewCfgPvlanPortsread-onlycurrentThe port list in the PVLAN. The ports are presented in bitmap format.
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1.12ColumnpvlanNewCfgPvlanTagPortsread-onlycurrentThe list of tagged-PVLAN ports. The ports are presented in bitmap format.
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1.13ColumnpvlanNewCfgPvlanDeleteread-writecurrentDelete a PVLAN
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1.14ColumnpvlanNewCfgPvlanPredefProtoread-writecurrentA predefined Protocol (setting EtherType and FrameType to predefined values).
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1.15ColumnpvlanNewCfgPvlanAddPortAliasread-writecurrentThe port alias to be added to the specified PVLAN. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1.16ColumnpvlanNewCfgPvlanRemovePortAliasread-writecurrentThe port alias to be removed to the specified PVLAN. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1.17ColumnpvlanNewCfgPvlanTagPortAliasread-writecurrentThe port alias to be tagged for the specified PVLAN. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.1.6.1.18ColumnpvlanNewCfgPvlanUntagPortAliasread-writecurrentThe port alias to be untagged for the specified PVLAN. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.2Nodetrunkgroup
1.3.6.1.4.1.20301.2.7.18.2.1.2.1ScalartrunkGroupTableMaxSizeread-onlycurrentThe maximum number of entries in trunk group table.
1.3.6.1.4.1.20301.2.7.18.2.1.2.2TabletrunkGroupCurCfgTablenot-accessiblecurrentThe table of trunk group configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.2.2.1RowtrunkGroupCurCfgTableEntrynot-accessiblecurrentA row in the trunk group configuration table.
1.3.6.1.4.1.20301.2.7.18.2.1.2.2.1.1ColumntrunkGroupCurCfgIndexread-onlycurrentThe identifier of the trunk group.
1.3.6.1.4.1.20301.2.7.18.2.1.2.2.1.2ColumntrunkGroupCurCfgPortsread-onlycurrentThe port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 |…
1.3.6.1.4.1.20301.2.7.18.2.1.2.2.1.3ColumntrunkGroupCurCfgStateread-onlycurrentEnable or disable a trunk group.
1.3.6.1.4.1.20301.2.7.18.2.1.2.3TabletrunkGroupNewCfgTablenot-accessiblecurrentThe table of trunk group configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.2.3.1RowtrunkGroupNewCfgTableEntrynot-accessiblecurrentA row in the trunk group configuration table.
1.3.6.1.4.1.20301.2.7.18.2.1.2.3.1.1ColumntrunkGroupNewCfgIndexread-onlycurrentThe identifier of the trunk group.
1.3.6.1.4.1.20301.2.7.18.2.1.2.3.1.2ColumntrunkGroupNewCfgPortsread-onlycurrentThe port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 |…
1.3.6.1.4.1.20301.2.7.18.2.1.2.3.1.3ColumntrunkGroupNewCfgAddPortIndexread-createcurrentThe port to be added in the trunk group. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.2.3.1.4ColumntrunkGroupNewCfgRemovePortIndexread-createcurrentThe port to be deleted from the trunk group. when read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.2.3.1.5ColumntrunkGroupNewCfgStateread-createcurrentEnable or disable a trunk group.
1.3.6.1.4.1.20301.2.7.18.2.1.2.3.1.6ColumntrunkGroupNewCfgDeleteread-createcurrentSetting the value to delete(2) will delete the entire row. When read, other(1) is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.2.3.1.7ColumntrunkGroupNewCfgAddPortAliasread-writecurrentThe port alias to be added in the trunk group. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.2.3.1.8ColumntrunkGroupNewCfgRemovePortAliasread-writecurrentThe port alias to be deleted from the trunk group. when read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.3NodestgCfg
1.3.6.1.4.1.20301.2.7.18.2.1.3.1TablestgCurCfgTablenot-accessiblecurrentThe table of Spanning Tree Group configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.3.1.1RowstgCurCfgTableEntrynot-accessiblecurrentInformation about a particular Spanning Tree Group configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.3.1.1.1ColumnstgCurCfgIndexread-onlycurrentThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.20301.2.7.18.2.1.3.1.1.2ColumnstgCurCfgStateread-onlycurrentTurn on of off Spanning Tree operation of a particular Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.1.3.1.1.5ColumnstgCurCfgPriorityread-onlycurrentThe value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
1.3.6.1.4.1.20301.2.7.18.2.1.3.1.1.6ColumnstgCurCfgBrgHelloTimeread-onlycurrentThe value in seconds that all bridges use for HelloTime when this bridge is acting as the root.
1.3.6.1.4.1.20301.2.7.18.2.1.3.1.1.7ColumnstgCurCfgBrgForwardDelayread-onlycurrentThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
1.3.6.1.4.1.20301.2.7.18.2.1.3.1.1.8ColumnstgCurCfgBrgMaxAgeread-onlycurrentThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
1.3.6.1.4.1.20301.2.7.18.2.1.3.1.1.10ColumnstgCurCfgVlanBmapread-onlycurrentThe vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4096. in receiving order: OC…
1.3.6.1.4.1.20301.2.7.18.2.1.3.2TablestgNewCfgTablenot-accessiblecurrentThe table of Spanning Tree Groups configuration in the new_config.
1.3.6.1.4.1.20301.2.7.18.2.1.3.2.1RowstgNewCfgTableEntrynot-accessiblecurrentInformation about a particular Spanning Tree Group configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.3.2.1.1ColumnstgNewCfgIndexread-onlycurrentThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.20301.2.7.18.2.1.3.2.1.2ColumnstgNewCfgStateread-writecurrentTurn on of off Spanning Tree operation of a particular Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.1.3.2.1.3ColumnstgNewCfgDefaultCfgread-writecurrentSetting the value to default-config(1) will set the default configuration as recommended by IEEE 802.1D for a particular Spanning Tree Group. default-config (1…
1.3.6.1.4.1.20301.2.7.18.2.1.3.2.1.4ColumnstgNewCfgAddVlanread-writecurrentThe vlan to be added to the specified Spanning Tree Group. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.3.2.1.5ColumnstgNewCfgRemoveVlanread-writecurrentThe vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.3.2.1.8ColumnstgNewCfgPriorityread-writecurrentThe value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
1.3.6.1.4.1.20301.2.7.18.2.1.3.2.1.9ColumnstgNewCfgBrgHelloTimeread-writecurrentThe value in seconds that all bridges use for HelloTime when this bridge is acting as the root.
1.3.6.1.4.1.20301.2.7.18.2.1.3.2.1.10ColumnstgNewCfgBrgForwardDelayread-writecurrentThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
1.3.6.1.4.1.20301.2.7.18.2.1.3.2.1.11ColumnstgNewCfgBrgMaxAgeread-writecurrentThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
1.3.6.1.4.1.20301.2.7.18.2.1.3.2.1.13ColumnstgNewCfgVlanBmapread-onlycurrentThe vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4096. in receiving order: OC…
1.3.6.1.4.1.20301.2.7.18.2.1.3.2.1.14ColumnstgNewCfgRemoveAllVlanread-writecurrentThe all vlans to be removed from the specified Spanning Tree Group. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.3.3TablestgCurCfgPortTablenot-accessiblecurrentThe table of Spanning Tree Group port configuration in the current_config.
1.3.6.1.4.1.20301.2.7.18.2.1.3.3.1RowstgCurCfgPortTableEntrynot-accessiblecurrentInformation about port configuration of a particular Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.1.3.3.1.1ColumnstgCurCfgStgIndexread-onlycurrentThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.20301.2.7.18.2.1.3.3.1.2ColumnstgCurCfgPortIndexread-onlycurrentThe port identifier of a particular Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.1.3.3.1.3ColumnstgCurCfgPortStateread-onlycurrentTurn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.1.3.3.1.4ColumnstgCurCfgPortPriorityread-onlycurrentThe value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
1.3.6.1.4.1.20301.2.7.18.2.1.3.3.1.5ColumnstgCurCfgPortPathCostread-onlycurrentThe contribution of this port to the path cost of paths towards the spanning tree root which include this port ( range is (0..200000000) ).
1.3.6.1.4.1.20301.2.7.18.2.1.3.3.1.8ColumnstgCurCfgPortAliasread-onlycurrentThe port alias of a particular Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.1.3.4TablestgNewCfgPortTablenot-accessiblecurrentThe table of Spanning Tree Group port configuration in the new_config.
1.3.6.1.4.1.20301.2.7.18.2.1.3.4.1RowstgNewCfgPortTableEntrynot-accessiblecurrentInformation about port configuration of a particular Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.1.3.4.1.1ColumnstgNewCfgStgIndexread-onlycurrentThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.20301.2.7.18.2.1.3.4.1.2ColumnstgNewCfgPortIndexread-onlycurrentThe port identifier of a particular Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.1.3.4.1.3ColumnstgNewCfgPortStateread-createcurrentTurn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.1.3.4.1.4ColumnstgNewCfgPortPriorityread-createcurrentThe value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
1.3.6.1.4.1.20301.2.7.18.2.1.3.4.1.5ColumnstgNewCfgPortPathCostread-createcurrentThe contribution of this port to the path cost of paths towards the spanning tree root which include this port ( range is (0..200000000) ).
1.3.6.1.4.1.20301.2.7.18.2.1.3.4.1.8ColumnstgNewCfgPortAliasread-onlycurrentThe port alias of a particular Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.1.4Nodemirroring
1.3.6.1.4.1.20301.2.7.18.2.1.4.1NodemirrPortMirr
1.3.6.1.4.1.20301.2.7.18.2.1.4.1.1ScalarpmCurCfgPortMirrStateread-onlycurrentThe state of port-based port mirroring.
1.3.6.1.4.1.20301.2.7.18.2.1.4.1.2ScalarpmNewCfgPortMirrStateread-writecurrentThe state of port-based port mirroring.
1.3.6.1.4.1.20301.2.7.18.2.1.4.1.3TablepmCurCfgPortMonitorTablenot-accessiblecurrentThe table of monitoring ports.
1.3.6.1.4.1.20301.2.7.18.2.1.4.1.3.1RowpmCurCfgPortMonitorEntrynot-accessiblecurrentA row in the monitoring port table.
1.3.6.1.4.1.20301.2.7.18.2.1.4.1.3.1.1ColumnpmCurCfgPmirrMoniPortIndexread-onlycurrentThe monitoring port number.
1.3.6.1.4.1.20301.2.7.18.2.1.4.1.3.1.2ColumnpmCurCfgPmirrMirrPortIndexread-onlycurrentThe mirrored port number
1.3.6.1.4.1.20301.2.7.18.2.1.4.1.3.1.3ColumnpmCurCfgPmirrDirectionread-onlycurrentThe type of traffic to be monitored with respect to the mirrored port.
1.3.6.1.4.1.20301.2.7.18.2.1.4.1.3.1.7ColumnpmCurCfgPmirrMoniPortAliasread-onlycurrentThe monitoring port alias.
1.3.6.1.4.1.20301.2.7.18.2.1.4.1.3.1.8ColumnpmCurCfgPmirrMirrPortAliasread-onlycurrentThe mirrored port alias.
1.3.6.1.4.1.20301.2.7.18.2.1.4.1.4TablepmNewCfgPortMonitorTablenot-accessiblecurrentThe table of monitoring ports.
1.3.6.1.4.1.20301.2.7.18.2.1.4.1.4.1RowpmNewCfgPortMonitorEntrynot-accessiblecurrentA row in the monitoring port table.
1.3.6.1.4.1.20301.2.7.18.2.1.4.1.4.1.1ColumnpmNewCfgPmirrMoniPortIndexread-onlycurrentThe monitoring port number.
1.3.6.1.4.1.20301.2.7.18.2.1.4.1.4.1.2ColumnpmNewCfgPmirrMirrPortIndexread-onlycurrentThe mirrored port number
1.3.6.1.4.1.20301.2.7.18.2.1.4.1.4.1.3ColumnpmNewCfgPmirrDirectionread-createcurrentThe type of traffic to be monitored with respect to the mirrored port.
1.3.6.1.4.1.20301.2.7.18.2.1.4.1.4.1.4ColumnpmNewCfgPmirrDeleteread-createcurrentSetting the value to delete(2) will delete the entire row. When read, other(1) is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.4.1.4.1.10ColumnpmNewCfgPmonDeleteread-createcurrentSetting the value to delete(2) will delete the monitor port. When read, other(1) is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.4.1.4.1.11ColumnpmNewCfgPmirrMoniPortAliasread-onlycurrentThe monitoring port alias.
1.3.6.1.4.1.20301.2.7.18.2.1.4.1.4.1.12ColumnpmNewCfgPmirrMirrPortAliasread-onlycurrentThe mirrored port alias.
1.3.6.1.4.1.20301.2.7.18.2.1.5Nodelacp
1.3.6.1.4.1.20301.2.7.18.2.1.5.1ScalarlacpCurSystemPriorityread-onlycurrentA 2-octet read-write value indicating the priority value associated with the Actor's System ID.
1.3.6.1.4.1.20301.2.7.18.2.1.5.2ScalarlacpNewSystemPriorityread-writecurrentA 2-octet read-write value indicating the priority value associated with the Actor's System ID.
1.3.6.1.4.1.20301.2.7.18.2.1.5.5ScalarlacpCurSystemTimeoutTimeread-onlycurrentIf a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).
1.3.6.1.4.1.20301.2.7.18.2.1.5.6ScalarlacpNewSystemTimeoutTimeread-writecurrentIf a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).
1.3.6.1.4.1.20301.2.7.18.2.1.5.7TablelacpCurPortCfgTablenot-accessiblecurrentThe table of LACP port configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.5.7.1RowlacpCurPortCfgTableEntrynot-accessiblecurrentA row in the LACP port configuration table.
1.3.6.1.4.1.20301.2.7.18.2.1.5.7.1.1ColumnlacpCurPortCfgTableIdread-onlycurrentLACP port number.
1.3.6.1.4.1.20301.2.7.18.2.1.5.7.1.2ColumnlacpCurPortStateread-onlycurrentLACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but resp…
1.3.6.1.4.1.20301.2.7.18.2.1.5.7.1.3ColumnlacpCurPortActorPortPriorityread-onlycurrentThe priority value assigned to this Aggregation Port. This 16-bit value is read-only.
1.3.6.1.4.1.20301.2.7.18.2.1.5.7.1.4ColumnlacpCurPortActorAdminKeyread-onlycurrentThe current administrative value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local signif…
1.3.6.1.4.1.20301.2.7.18.2.1.5.7.1.5ColumnlacpCurPortActorMinLinksread-onlycurrentThe current minimum links for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
1.3.6.1.4.1.20301.2.7.18.2.1.5.7.1.6ColumnlacpCurPortSuspendIndividualread-onlycurrentIt indicates if the port can be treated as an individual link when it does not get LACPDU from the peer port. suspend (can't be treated as a normal link) indiv…
1.3.6.1.4.1.20301.2.7.18.2.1.5.7.1.7ColumnlacpCurPortAliasread-onlycurrentLACP port alias.
1.3.6.1.4.1.20301.2.7.18.2.1.5.8TablelacpNewPortCfgTablenot-accessiblecurrentThe table of LACP port configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.5.8.1RowlacpNewPortCfgTableEntrynot-accessiblecurrentA row in the LACP port configuration table.
1.3.6.1.4.1.20301.2.7.18.2.1.5.8.1.1ColumnlacpNewPortCfgTableIdread-onlycurrentLACP port number.
1.3.6.1.4.1.20301.2.7.18.2.1.5.8.1.2ColumnlacpNewPortStateread-writecurrentLACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but resp…
1.3.6.1.4.1.20301.2.7.18.2.1.5.8.1.3ColumnlacpNewPortActorPortPriorityread-writecurrentThe priority value assigned to this Aggregation Port. This 16-bit value is read-write.
1.3.6.1.4.1.20301.2.7.18.2.1.5.8.1.4ColumnlacpNewPortActorAdminKeyread-writecurrentThe current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local signi…
1.3.6.1.4.1.20301.2.7.18.2.1.5.8.1.5ColumnlacpNewPortActorMinLinksread-writecurrentThe current minimum links for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance.
1.3.6.1.4.1.20301.2.7.18.2.1.5.8.1.6ColumnlacpNewPortSetToDefaultread-writecurrentWhen read, always returns none(1). When setting setDefault(2) value, the LACP port settings are set to the default values.
1.3.6.1.4.1.20301.2.7.18.2.1.5.8.1.7ColumnlacpNewPortSuspendIndividualread-writecurrentIt indicates if the port can be treated as an individual link when it does not get LACPDU from the peer port. suspend (can't be treated as a normal link) indiv…
1.3.6.1.4.1.20301.2.7.18.2.1.5.8.1.8ColumnlacpNewPortAliasread-onlycurrentLACP port alias.
1.3.6.1.4.1.20301.2.7.18.2.1.5.9ScalarlacpDeleteTrunkread-writecurrentDelete a trunk with specified admin key
1.3.6.1.4.1.20301.2.7.18.2.1.5.10ScalarlacpNewSystemSetToDefaultread-writecurrentWhen read, always returns none(1). When setting setDefault(2) value, the LACP system settings are set to the default values.
1.3.6.1.4.1.20301.2.7.18.2.1.6Nodethash
1.3.6.1.4.1.20301.2.7.18.2.1.6.1NodethashL2L3
1.3.6.1.4.1.20301.2.7.18.2.1.6.1.1Scalarl2ThashCurCfgSmacStateread-onlycurrentEnable or disable smac hash for traffic.
1.3.6.1.4.1.20301.2.7.18.2.1.6.1.2Scalarl2ThashNewCfgSmacStateread-writecurrentEnable or disable smac hash for traffic.
1.3.6.1.4.1.20301.2.7.18.2.1.6.1.3Scalarl2ThashCurCfgDmacStateread-onlycurrentEnable or disable dmac hash for traffic.
1.3.6.1.4.1.20301.2.7.18.2.1.6.1.4Scalarl2ThashNewCfgDmacStateread-writecurrentEnable or disable dmac hash for traffic.
1.3.6.1.4.1.20301.2.7.18.2.1.6.1.5Scalarl3ThashCurCfgIpUseL2Stateread-onlycurrentEnable or disable L2 hash for IP traffic.
1.3.6.1.4.1.20301.2.7.18.2.1.6.1.6Scalarl3ThashNewCfgIpUseL2Stateread-writecurrentEnable or disable L2 hash for IP traffic.
1.3.6.1.4.1.20301.2.7.18.2.1.6.1.7Scalarl3ThashCurCfgSipStateread-onlycurrentEnable or disable sip hash for IP traffic.
1.3.6.1.4.1.20301.2.7.18.2.1.6.1.8Scalarl3ThashNewCfgSipStateread-writecurrentEnable or disable sip hash for IP traffic.
1.3.6.1.4.1.20301.2.7.18.2.1.6.1.9Scalarl3ThashCurCfgDipStateread-onlycurrentEnable or disable dip hash for IP traffic.
1.3.6.1.4.1.20301.2.7.18.2.1.6.1.10Scalarl3ThashNewCfgDipStateread-writecurrentEnable or disable dip hash for IP traffic.
1.3.6.1.4.1.20301.2.7.18.2.1.6.1.11Scalarl2ThashCurCfgIngressStateread-onlycurrentEnable or disable ingres port hash.
1.3.6.1.4.1.20301.2.7.18.2.1.6.1.12Scalarl2ThashNewCfgIngressStateread-writecurrentEnable or disable ingres port hash.
1.3.6.1.4.1.20301.2.7.18.2.1.6.1.13Scalarl3ThashCurCfgL4PortStateread-onlycurrentEnable or disable L4 port hash.
1.3.6.1.4.1.20301.2.7.18.2.1.6.1.14Scalarl3ThashNewCfgL4PortStateread-writecurrentEnable or disable L4 port hash.
1.3.6.1.4.1.20301.2.7.18.2.1.7NodemstCfg
1.3.6.1.4.1.20301.2.7.18.2.1.7.1NodemstGeneralCfg
1.3.6.1.4.1.20301.2.7.18.2.1.7.1.3ScalarmstCurCfgRegionNameread-onlycurrentThe Name for the Region's configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.7.1.4ScalarmstNewCfgRegionNameread-writecurrentThe Name for the Region's configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.7.1.5ScalarmstCurCfgRegionRevisionread-onlycurrentRevision of the MST Region.
1.3.6.1.4.1.20301.2.7.18.2.1.7.1.6ScalarmstNewCfgRegionRevisionread-writecurrentRevision of the MST Region.
1.3.6.1.4.1.20301.2.7.18.2.1.7.1.7ScalarmstCurCfgMaxHopCountread-onlycurrentIndicates the maximum hop count value.
1.3.6.1.4.1.20301.2.7.18.2.1.7.1.8ScalarmstNewCfgMaxHopCountread-writecurrentIndicates the maximum hop count value.
1.3.6.1.4.1.20301.2.7.18.2.1.7.1.9ScalarmstCurCfgStpModeread-onlycurrentThe version of Spanning Tree Protocal the bridge is currently running.
1.3.6.1.4.1.20301.2.7.18.2.1.7.1.10ScalarmstNewCfgStpModeread-writecurrentThe version of Spanning Tree Protocal the bridge is currently running.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2NodemstCistCfg
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.1ScalarmstCistDefaultCfgread-writecurrentSetting the value to default(1) will set the Multiple Spanning Tree and member parameters to default. default(1) is always returned when read, but it does not …
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.2NodemstCistBridgeCfg
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.2.1ScalarmstCistCurCfgBridgePriorityread-onlycurrentThe value of the writable portion of the Brigde Identifier comprising of the first two octets.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.2.2ScalarmstCistNewCfgBridgePriorityread-writecurrentThe value of the writable portion of the Brigde Identifier comprising of the first two octets.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.2.5ScalarmstCistCurCfgBridgeMaxAgeread-onlycurrentThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.2.6ScalarmstCistNewCfgBridgeMaxAgeread-writecurrentThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.2.7ScalarmstCistCurCfgBridgeForwardDelayread-onlycurrentThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.2.8ScalarmstCistNewCfgBridgeForwardDelayread-writecurrentThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.2.9ScalarmstCistCurCfgVlanBmapread-onlycurrentThe vlans applied to the CIST group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4094. in receiving order: OCTET 1 OCT…
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.2.10ScalarmstCistNewCfgVlanBmapread-onlycurrentThe vlans applied to the CIST group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4094. in receiving order: OCTET 1 OCT…
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.2.11ScalarmstCistNewCfgAddVlanread-createcurrentThe vlan to be added to the CIST Group. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.3TablemstCistCurCfgPortTablenot-accessiblecurrentThe table of CIST Port configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.3.1RowmstCistCurCfgPortTableEntrynot-accessiblecurrentInformation about a particular CIST Port configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.3.1.1ColumnmstCistCurCfgPortIndexread-onlycurrentThe port number of the port for which this entry contains spanning tree configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.3.1.2ColumnmstCistCurCfgPortPriorityread-onlycurrentThe four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.3.1.3ColumnmstCistCurCfgPortPathCostread-onlycurrentThe contribution of this port to the path cost of paths towards the CIST Root which include this port.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.3.1.4ColumnmstCistCurCfgPortLinkTyperead-onlycurrentThe administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if i…
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.3.1.5ColumnmstCistCurCfgPortEdgeread-onlycurrentThe value of the Edge Port parameter. (for MSTP only)
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.3.1.6ColumnmstCistCurCfgPortStpStateread-onlycurrentTurn port's Spanning Tree on/off.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.3.1.7ColumnmstCistCurCfgPortHelloTimeread-onlycurrentThe amount of time between the transmission of Configuration Port PDUs in seconds.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.3.1.8ColumnmstCistCurCfgPortPvstProtectionread-onlycurrentThe value of the PVST Protection parameter.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.3.1.9ColumnmstCistCurCfgPortAliasread-onlycurrentThe port alias of the port for which this entry contains spanning tree configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.4TablemstCistNewCfgPortTablenot-accessiblecurrentThe table of CIST Port configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.4.1RowmstCistNewCfgPortTableEntrynot-accessiblecurrentInformation about a particular CIST Port configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.4.1.1ColumnmstCistNewCfgPortIndexread-onlycurrentThe port number of the port for which this entry contains spanning tree configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.4.1.2ColumnmstCistNewCfgPortPriorityread-writecurrentThe four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.4.1.3ColumnmstCistNewCfgPortPathCostread-writecurrentThe contribution of this port to the path cost of paths towards the CIST Root which include this port.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.4.1.6ColumnmstCistNewCfgPortStpStateread-writecurrentTurn port's Spanning Tree on/off.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.4.1.7ColumnmstCistNewCfgPortHelloTimeread-writecurrentThe amount of time between the transmission of Configuration Port PDUs in seconds.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.4.1.8ColumnmstCistNewCfgPortPvstProtectionread-writecurrentThe value of the PVST Protection parameter.
1.3.6.1.4.1.20301.2.7.18.2.1.7.2.4.1.9ColumnmstCistNewCfgPortAliasread-onlycurrentThe port alias of the port for which this entry contains spanning tree configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.8Nodel2GeneralCfg
1.3.6.1.4.1.20301.2.7.18.2.1.8.9ScalarpvstCompatibilityCurCfgStateread-onlycurrentEnable or disable PVST+ compatibility
1.3.6.1.4.1.20301.2.7.18.2.1.8.10ScalarpvstCompatibilityNewCfgStateread-writecurrentEnable or disable PVST+ compatibility
1.3.6.1.4.1.20301.2.7.18.2.1.8.11ScalarnostpCurCfgStateread-onlycurrentSTP Mode Disable global state.
1.3.6.1.4.1.20301.2.7.18.2.1.8.12ScalarnostpNewCfgStateread-writecurrentEnable or disable STP Mode Disable.
1.3.6.1.4.1.20301.2.7.18.2.1.8.13ScalarstpLoopGuardCurCfgStateread-onlycurrentSTP loop guard global state.
1.3.6.1.4.1.20301.2.7.18.2.1.8.14ScalarstpLoopGuardNewCfgStateread-writecurrentEnable or disable STP loop guard.
1.3.6.1.4.1.20301.2.7.18.2.1.8.15ScalarvlanAutoStgCurCfgStateread-onlycurrentVLAN automatic STG assignment global state.
1.3.6.1.4.1.20301.2.7.18.2.1.8.16ScalarvlanAutoStgNewCfgStateread-writecurrentEnable or disable VLAN automatic STG assignment.
1.3.6.1.4.1.20301.2.7.18.2.1.10NodefailoverCfg
1.3.6.1.4.1.20301.2.7.18.2.1.10.1ScalarfailoverCurCfgOnStateread-onlycurrentFailover ON/OFF setting.
1.3.6.1.4.1.20301.2.7.18.2.1.10.2ScalarfailoverNewCfgOnStateread-writecurrentFailover ON/OFF settings.
1.3.6.1.4.1.20301.2.7.18.2.1.10.5ScalarfailoverMaxTriggerEntriesread-onlycurrentThe maximum number of entries in the Failover Trigger Table.
1.3.6.1.4.1.20301.2.7.18.2.1.10.6TablefailoverCurCfgTriggerTablenot-accessiblecurrentThe Failover Trigger Table.
1.3.6.1.4.1.20301.2.7.18.2.1.10.6.1RowfailoverCurCfgTriggerTableEntrynot-accessiblecurrentA row in the Failover Trigger Table.
1.3.6.1.4.1.20301.2.7.18.2.1.10.6.1.1ColumnfailoverCurCfgTriggerIdread-onlycurrentThe Trigger identifier.
1.3.6.1.4.1.20301.2.7.18.2.1.10.6.1.2ColumnfailoverCurCfgTriggerStateread-onlycurrentEnable or disable Trigger state
1.3.6.1.4.1.20301.2.7.18.2.1.10.6.1.3ColumnfailoverCurCfgTriggerLimitread-onlycurrentLimit # of operational links
1.3.6.1.4.1.20301.2.7.18.2.1.10.6.1.6ColumnfailoverCurCfgTriggerMmonPortread-onlycurrentThe Manual Monitor port list. The ports are presented in bitmap format: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || …
1.3.6.1.4.1.20301.2.7.18.2.1.10.6.1.7ColumnfailoverCurCfgTriggerMmonTrunkread-onlycurrentThe Manual Monitor trunk list. The trunks are presented in bitmap format: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7…
1.3.6.1.4.1.20301.2.7.18.2.1.10.6.1.8ColumnfailoverCurCfgTriggerMmonKeyread-onlycurrentThe LACP admin key. This is an array of 16-bit read-only values.
1.3.6.1.4.1.20301.2.7.18.2.1.10.6.1.9ColumnfailoverCurCfgTriggerMconPortread-onlycurrentThe Manual Control port list. The ports are presented in bitmap format: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || …
1.3.6.1.4.1.20301.2.7.18.2.1.10.6.1.11ColumnfailoverCurCfgTriggerMconTrunkread-onlycurrentThe Manual Control trunk list. The trunks are presented in bitmap format: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7…
1.3.6.1.4.1.20301.2.7.18.2.1.10.6.1.12ColumnfailoverCurCfgTriggerMconKeyread-onlycurrentThe LACP admin key. This is an array of 16-bit read-only values.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7TablefailoverNewCfgTriggerTablenot-accessiblecurrentThe Failover Trigger Table.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1RowfailoverNewCfgTriggerTableEntrynot-accessiblecurrentA row in the Failover Trigger Table.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.1ColumnfailoverNewCfgTriggerIdread-onlycurrentThe Trigger identifier.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.2ColumnfailoverNewCfgTriggerStateread-writecurrentEnable or disable Trigger state
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.3ColumnfailoverNewCfgTriggerLimitread-writecurrentLimit # of operational links
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.10ColumnfailoverNewCfgTriggerMmonPortread-onlycurrentThe Manual Monitor port list. The ports are presented in bitmap format: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || …
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.11ColumnfailoverNewCfgTriggerMmonPortIndexAddread-createcurrentAdd port to Manual Monitor. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.12ColumnfailoverNewCfgTriggerMmonPortIndexRemread-createcurrentRemove port from Manual Monitor. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.13ColumnfailoverNewCfgTriggerMmonTrunkread-onlycurrentThe Manual Monitor trunk list. The trunks are presented in bitmap format: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7…
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.14ColumnfailoverNewCfgTriggerMmonTrunkAddread-createcurrentAdd trunk to Manual Monitor. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.15ColumnfailoverNewCfgTriggerMmonTrunkRemread-createcurrentRemove trunk from Manual Monitor. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.16ColumnfailoverNewCfgTriggerMmonKeyread-onlycurrentThe LACP admin key. This is an array of 16-bit read-only values.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.17ColumnfailoverNewCfgTriggerMmonKeyAddread-createcurrentAdd LACP admin key to Manual Monitor. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.18ColumnfailoverNewCfgTriggerMmonKeyRemread-createcurrentRemove LACP admin key from Manual Monitor. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.19ColumnfailoverNewCfgTriggerMconPortread-onlycurrentThe Manual Control port list. The ports are presented in bitmap format: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || …
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.20ColumnfailoverNewCfgTriggerMconPortIndexAddread-createcurrentAdd port to Manual Control. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.21ColumnfailoverNewCfgTriggerMconPortIndexRemread-createcurrentRemove port from Manual Control. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.25ColumnfailoverNewCfgTriggerMconTrunkread-onlycurrentThe Manual Control trunk list. The trunks are presented in bitmap format: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7…
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.26ColumnfailoverNewCfgTriggerMconTrunkAddread-createcurrentAdd trunk to Manual Control. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.27ColumnfailoverNewCfgTriggerMconTrunkRemread-createcurrentRemove trunk from Manual Control. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.28ColumnfailoverNewCfgTriggerMconKeyread-onlycurrentThe LACP admin key. This is an array of 16-bit read-only values.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.29ColumnfailoverNewCfgTriggerMconKeyAddread-createcurrentAdd LACP admin key to Manual Control. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.30ColumnfailoverNewCfgTriggerMconKeyRemread-createcurrentRemove LACP admin key from Manual Control. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.31ColumnfailoverNewCfgTriggerDeleteread-createcurrentSetting the value to delete(2) will delete the entire row. When read, other(1) is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.33ColumnfailoverNewCfgTriggerMmonPortAliasAddread-createcurrentAdd port to Manual Monitor using its alias. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.34ColumnfailoverNewCfgTriggerMmonPortAliasRemread-createcurrentRemove port from Manual Monitor using its alias. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.35ColumnfailoverNewCfgTriggerMconPortAliasAddread-createcurrentAdd port to Manual Control using its alias. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.10.7.1.36ColumnfailoverNewCfgTriggerMconPortAliasRemread-createcurrentRemove port from Manual Control using its alias. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.2.1.12Nodedot1x
1.3.6.1.4.1.20301.2.7.18.2.1.12.1Scalardot1xCurStatusread-onlycurrentDot1x status
1.3.6.1.4.1.20301.2.7.18.2.1.12.2Scalardot1xNewStatusread-writecurrentDot1x status
1.3.6.1.4.1.20301.2.7.18.2.1.12.3Tabledot1xCurCfgPortTablenot-accessiblecurrentThe table of 8021x configuration in the Current_config.
1.3.6.1.4.1.20301.2.7.18.2.1.12.3.1Rowdot1xCurCfgPortEntrynot-accessiblecurrentInformation about 8021x Port Config
1.3.6.1.4.1.20301.2.7.18.2.1.12.3.1.1Columndot1xCurCfgPortIndexread-onlycurrentThe 8021x Port number for which the table is related.
1.3.6.1.4.1.20301.2.7.18.2.1.12.3.1.2Columndot1xCurCfgPortModeread-onlycurrentPort authenticaton mode forceUnauth(0), auto(1), forceAuth(2)
1.3.6.1.4.1.20301.2.7.18.2.1.12.3.1.3Columndot1xCurCfgPortQtPeriodread-onlycurrentQuiet period (0-65535)
1.3.6.1.4.1.20301.2.7.18.2.1.12.3.1.4Columndot1xCurCfgPortTxPeriodread-onlycurrentTx Period
1.3.6.1.4.1.20301.2.7.18.2.1.12.3.1.5Columndot1xCurCfgPortSupTmoutread-onlycurrentSupplicant timeout (1..65535)
1.3.6.1.4.1.20301.2.7.18.2.1.12.3.1.6Columndot1xCurCfgPortSrvTmoutread-onlycurrentServer timeout (1..65535)
1.3.6.1.4.1.20301.2.7.18.2.1.12.3.1.7Columndot1xCurCfgPortMaxRqread-onlycurrentMaximum numer of requests (1..10)
1.3.6.1.4.1.20301.2.7.18.2.1.12.3.1.8Columndot1xCurCfgPortRaPeriodread-onlycurrentReautentication period (0..604800)
1.3.6.1.4.1.20301.2.7.18.2.1.12.3.1.9Columndot1xCurCfgPortReAuthread-onlycurrentReAuthentication state off(0), on(1)
1.3.6.1.4.1.20301.2.7.18.2.1.12.3.1.10Columndot1xCurCfgPortVlanAssignread-onlycurrentVlan assignment state off(0), on(1)
1.3.6.1.4.1.20301.2.7.18.2.1.12.3.1.11Columndot1xCurCfgPortAliasread-onlycurrentThe 8021x Port alias for which the table is related.
1.3.6.1.4.1.20301.2.7.18.2.1.12.4Tabledot1xNewCfgPortTablenot-accessiblecurrentThe table of 8021x configuration in the new_config.
1.3.6.1.4.1.20301.2.7.18.2.1.12.4.1Rowdot1xNewCfgPortEntrynot-accessiblecurrentInformation about 8021x Port Config
1.3.6.1.4.1.20301.2.7.18.2.1.12.4.1.1Columndot1xNewCfgPortIndexread-onlycurrentThe 8021x Port number for which the table is related.
1.3.6.1.4.1.20301.2.7.18.2.1.12.4.1.2Columndot1xNewCfgPortModeread-createcurrentPort authentication mode forceUnauth(0), auto(1), forceAuth(2)
1.3.6.1.4.1.20301.2.7.18.2.1.12.4.1.3Columndot1xNewCfgPortQtPeriodread-createcurrentQuiet period (0..65535)
1.3.6.1.4.1.20301.2.7.18.2.1.12.4.1.4Columndot1xNewCfgPortTxPeriodread-createcurrentTx Period (1..65535)
1.3.6.1.4.1.20301.2.7.18.2.1.12.4.1.5Columndot1xNewCfgPortSupTmoutread-createcurrentSupplicant Timeout (1..65535)
1.3.6.1.4.1.20301.2.7.18.2.1.12.4.1.6Columndot1xNewCfgPortSrvTmoutread-createcurrentServer Timeout (1..65535)
1.3.6.1.4.1.20301.2.7.18.2.1.12.4.1.7Columndot1xNewCfgPortMaxRqread-createcurrentMaximum number of requests (1..10)
1.3.6.1.4.1.20301.2.7.18.2.1.12.4.1.8Columndot1xNewCfgPortRaPeriodread-createcurrentReauthentication period (1..604800)
1.3.6.1.4.1.20301.2.7.18.2.1.12.4.1.9Columndot1xNewCfgPortReAuthread-createcurrentReauthentication state off(0), on(1)
1.3.6.1.4.1.20301.2.7.18.2.1.12.4.1.10Columndot1xNewCfgPortDefaultread-createcurrentPort default settings
1.3.6.1.4.1.20301.2.7.18.2.1.12.4.1.11Columndot1xNewCfgPortApplyGlobalread-createcurrentApply Global config
1.3.6.1.4.1.20301.2.7.18.2.1.12.4.1.12Columndot1xNewCfgPortVlanAssignread-createcurrentEnable/Disable the assignment of vlan from radius server when the port is successfully autheticated. Vlan assignment state off(0), on(1)
1.3.6.1.4.1.20301.2.7.18.2.1.12.4.1.13Columndot1xNewCfgPortAliasread-onlycurrentThe 8021x Port alias for which the table is related.
1.3.6.1.4.1.20301.2.7.18.2.1.12.5Nodedot1xCurCfgGlobalTable
1.3.6.1.4.1.20301.2.7.18.2.1.12.5.1Nodedot1xCurCfgGuestVlan
1.3.6.1.4.1.20301.2.7.18.2.1.12.5.1.1Scalardot1xCurCfgGuestVlanNumberread-onlycurrent8021.x Guest VLAN number
1.3.6.1.4.1.20301.2.7.18.2.1.12.5.1.2Scalardot1xCurCfgGuestVlanStatusread-onlycurrent8021.x Guest VLAN status enabled(1), disabled(2)
1.3.6.1.4.1.20301.2.7.18.2.1.12.5.3Scalardot1xCurCfgGlobalModeread-onlycurrentAutehtication Mode forceUnauth(0), auto(1), forceAuth(2)
1.3.6.1.4.1.20301.2.7.18.2.1.12.5.4Scalardot1xCurCfgGlobalQtPeriodread-onlycurrentQuiet period (0..65535)
1.3.6.1.4.1.20301.2.7.18.2.1.12.5.5Scalardot1xCurCfgGlobalTxPeriodread-onlycurrentTx period (1..65535)
1.3.6.1.4.1.20301.2.7.18.2.1.12.5.6Scalardot1xCurCfgGlobalSupTmoutread-onlycurrentSupplicant timeout (1..65535)
1.3.6.1.4.1.20301.2.7.18.2.1.12.5.7Scalardot1xCurCfgGlobalSrvTmoutread-onlycurrentServer timeout (1..65535)
1.3.6.1.4.1.20301.2.7.18.2.1.12.5.8Scalardot1xCurCfgGlobalMaxRqread-onlycurrentMaximum number of requests (1..10)
1.3.6.1.4.1.20301.2.7.18.2.1.12.5.9Scalardot1xCurCfgGlobalRaPeriodread-onlycurrentReauthentication period (0..604800)
1.3.6.1.4.1.20301.2.7.18.2.1.12.5.10Scalardot1xCurCfgGlobalReAuthread-onlycurrent
1.3.6.1.4.1.20301.2.7.18.2.1.12.5.12Scalardot1xCurCfgGlobalVlanAssignread-onlycurrentVlan assignment status
1.3.6.1.4.1.20301.2.7.18.2.1.12.6Nodedot1xNewCfgGlobalTable
1.3.6.1.4.1.20301.2.7.18.2.1.12.6.1Nodedot1xNewCfgGuestVlan
1.3.6.1.4.1.20301.2.7.18.2.1.12.6.1.1Scalardot1xNewCfgGuestVlanNumberread-writecurrent8021.x Guest VLAN number
1.3.6.1.4.1.20301.2.7.18.2.1.12.6.1.2Scalardot1xNewCfgGuestVlanStatusread-writecurrent8021.x Guest VLAN status enabled(1), disabled(2)
1.3.6.1.4.1.20301.2.7.18.2.1.12.6.3Scalardot1xNewCfgGlobalModeread-createcurrentAuthentication Mode
1.3.6.1.4.1.20301.2.7.18.2.1.12.6.4Scalardot1xNewCfgGlobalQtPeriodread-createcurrentQuiet Period (0..65535)
1.3.6.1.4.1.20301.2.7.18.2.1.12.6.5Scalardot1xNewCfgGlobalTxPeriodread-createcurrentTx Period (1..65535)
1.3.6.1.4.1.20301.2.7.18.2.1.12.6.6Scalardot1xNewCfgGlobalSupTmoutread-createcurrentSupplicand timeout (1..65535)
1.3.6.1.4.1.20301.2.7.18.2.1.12.6.7Scalardot1xNewCfgGlobalSrvTmoutread-createcurrentServer timeout (1..65535)
1.3.6.1.4.1.20301.2.7.18.2.1.12.6.8Scalardot1xNewCfgGlobalMaxRqread-createcurrentMaximum number of requests (1..10)
1.3.6.1.4.1.20301.2.7.18.2.1.12.6.9Scalardot1xNewCfgGlobalRaPeriodread-createcurrentReauthentication period (1..604800)
1.3.6.1.4.1.20301.2.7.18.2.1.12.6.10Scalardot1xNewCfgGlobalReAuthread-createcurrentReauthentication status
1.3.6.1.4.1.20301.2.7.18.2.1.12.6.11Scalardot1xNewCfgGlobalDefaultread-createcurrentRestore default 802.1x configuration
1.3.6.1.4.1.20301.2.7.18.2.1.12.6.12Scalardot1xNewCfgGlobalVlanAssignread-createcurrentEnable/Disable the assignment of vlan from radius server when the port is successfully autheticated.
1.3.6.1.4.1.20301.2.7.18.2.1.13Nodefdb
1.3.6.1.4.1.20301.2.7.18.2.1.13.1NodefdbGeneralCfg
1.3.6.1.4.1.20301.2.7.18.2.1.13.1.1ScalarfdbCurCfgAgingTimeread-onlycurrentFdb current aging time
1.3.6.1.4.1.20301.2.7.18.2.1.13.1.2ScalarfdbNewCfgAgingTimeread-writecurrentFdb new aging time.
1.3.6.1.4.1.20301.2.7.18.2.1.13.2TablefdbCurCfgStaticTablenot-accessiblecurrentThe table of FDB static entries.
1.3.6.1.4.1.20301.2.7.18.2.1.13.2.1RowfdbCurCfgStaticEntrynot-accessiblecurrentA row in the fdb table.
1.3.6.1.4.1.20301.2.7.18.2.1.13.2.1.1ColumnfdbCurCfgEntryIndexread-onlycurrentThe fdb entry index
1.3.6.1.4.1.20301.2.7.18.2.1.13.2.1.2ColumnfdbCurCfgVlanread-onlycurrentAdd vlan for fdb entry index
1.3.6.1.4.1.20301.2.7.18.2.1.13.2.1.3ColumnfdbCurCfgPortIndexread-onlycurrentThe MAC address port number.
1.3.6.1.4.1.20301.2.7.18.2.1.13.2.1.4ColumnfdbCurCfgMacread-onlycurrentAdd a fdb entry.
1.3.6.1.4.1.20301.2.7.18.2.1.13.2.1.5ColumnfdbCurCfgTrunkread-onlycurrentThe MAC address trunk number.
1.3.6.1.4.1.20301.2.7.18.2.1.13.2.1.6ColumnfdbCurCfgAdminkeyread-onlycurrentThe MAC address LACP trunk adminkey.
1.3.6.1.4.1.20301.2.7.18.2.1.13.2.1.7ColumnfdbCurCfgPortAliasread-onlycurrentThe MAC address port alias.
1.3.6.1.4.1.20301.2.7.18.2.1.13.3TablefdbNewCfgStaticTablenot-accessiblecurrentThe table of FDB static entries.
1.3.6.1.4.1.20301.2.7.18.2.1.13.3.1RowfdbNewCfgStaticEntrynot-accessiblecurrentA row in the fdb table.
1.3.6.1.4.1.20301.2.7.18.2.1.13.3.1.1ColumnfdbNewCfgEntryIndexread-onlycurrentThe fdb entry index
1.3.6.1.4.1.20301.2.7.18.2.1.13.3.1.2ColumnfdbNewCfgAddVlanread-createcurrentAdd vlan for fdb entry index
1.3.6.1.4.1.20301.2.7.18.2.1.13.3.1.3ColumnfdbNewCfgAddPortIndexread-createcurrentThe MAC address port number.
1.3.6.1.4.1.20301.2.7.18.2.1.13.3.1.4ColumnfdbNewCfgAddMacread-createcurrentAdd a fdb entry, ex:0x00 0x01 0x02 0x03 0x04 0x05
1.3.6.1.4.1.20301.2.7.18.2.1.13.3.1.5ColumnfdbNewCfgDelStaticEntryread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.20301.2.7.18.2.1.13.3.1.6ColumnfdbNewCfgAddTrunkread-createcurrentThe MAC address trunk number.
1.3.6.1.4.1.20301.2.7.18.2.1.13.3.1.7ColumnfdbNewCfgAddAdminkeyread-createcurrentThe MAC address LACP trunk adminkey.
1.3.6.1.4.1.20301.2.7.18.2.1.13.3.1.8ColumnfdbNewCfgAddPortAliasread-writecurrentThe MAC address port alias.
1.3.6.1.4.1.20301.2.7.18.2.1.13.8TablemcastFdbCurCfgTablenot-accessiblecurrentThe table of multicast FDB static entries.
1.3.6.1.4.1.20301.2.7.18.2.1.13.8.1RowmcastFdbCurCfgEntrynot-accessiblecurrentA row in the multicast fdb table.
1.3.6.1.4.1.20301.2.7.18.2.1.13.8.1.1ColumnmcastFdbCurCfgEntryIndexread-onlycurrentThe multicast fdb entry index
1.3.6.1.4.1.20301.2.7.18.2.1.13.8.1.2ColumnmcastFdbCurCfgVlanread-onlycurrentAdd vlan for multicast fdb entry index
1.3.6.1.4.1.20301.2.7.18.2.1.13.8.1.3ColumnmcastFdbCurCfgPortsread-onlycurrentThe multicast MAC address port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port …
1.3.6.1.4.1.20301.2.7.18.2.1.13.8.1.4ColumnmcastFdbCurCfgMacread-onlycurrentAdd a multicast fdb entry.
1.3.6.1.4.1.20301.2.7.18.2.1.13.9TablemcastFdbNewCfgTablenot-accessiblecurrentThe table of multicast FDB static entries.
1.3.6.1.4.1.20301.2.7.18.2.1.13.9.1RowmcastFdbNewCfgEntrynot-accessiblecurrentA row in the multicast fdb table.
1.3.6.1.4.1.20301.2.7.18.2.1.13.9.1.1ColumnmcastFdbNewCfgEntryIndexread-onlycurrentThe multicast fdb entry index
1.3.6.1.4.1.20301.2.7.18.2.1.13.9.1.2ColumnmcastFdbNewCfgAddVlanread-createcurrentAdd vlan for multicast fdb entry index
1.3.6.1.4.1.20301.2.7.18.2.1.13.9.1.3ColumnmcastFdbNewCfgPortsread-onlycurrentThe multicast MAC address port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port …
1.3.6.1.4.1.20301.2.7.18.2.1.13.9.1.4ColumnmcastFdbNewCfgAddPortIndexread-createcurrentThe multicast MAC address port number to be added. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.13.9.1.5ColumnmcastFdbNewCfgRemPortIndexread-createcurrentThe multicast MAC address port number to be removed. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.13.9.1.6ColumnmcastFdbNewCfgAddMacread-createcurrentAdd a multicast fdb entry, ex:0x00 0x01 0x02 0x03 0x04 0x05
1.3.6.1.4.1.20301.2.7.18.2.1.13.9.1.7ColumnmcastFdbNewCfgDelStaticEntryread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.20301.2.7.18.2.1.13.9.1.8ColumnmcastFdbNewCfgAddPortAliasread-createcurrentThe multicast MAC address port alias to be added. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.13.9.1.9ColumnmcastFdbNewCfgRemPortAliasread-createcurrentThe multicast MAC address port alias to be removed. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.2.1.14NodehotlinksCfg
1.3.6.1.4.1.20301.2.7.18.2.1.14.1ScalarhotlinksCurCfgOnStateread-onlycurrentHot Links ON/OFF setting.
1.3.6.1.4.1.20301.2.7.18.2.1.14.2ScalarhotlinksNewCfgOnStateread-writecurrentHot Links ON/OFF settings.
1.3.6.1.4.1.20301.2.7.18.2.1.14.3ScalarhotlinksCurCfgFdbUpdateStateread-onlycurrentEnable/disable Hot Links FDB Update setting.
1.3.6.1.4.1.20301.2.7.18.2.1.14.4ScalarhotlinksNewCfgFdbUpdateStateread-writecurrentEnable/disable Hot Links FDB Update setting.
1.3.6.1.4.1.20301.2.7.18.2.1.14.5ScalarhotlinksMaxTriggerEntriesread-onlycurrentThe maximum number of entries in the Hot Links Trigger Table.
1.3.6.1.4.1.20301.2.7.18.2.1.14.6TablehotlinksCurCfgTriggerTablenot-accessiblecurrentThe Hot Links Trigger Table.
1.3.6.1.4.1.20301.2.7.18.2.1.14.6.1RowhotlinksCurCfgTriggerTableEntrynot-accessiblecurrentA row in the Hot Links Trigger Table.
1.3.6.1.4.1.20301.2.7.18.2.1.14.6.1.1ColumnhotlinksCurCfgTriggerIdread-onlycurrentThe Trigger identifier.
1.3.6.1.4.1.20301.2.7.18.2.1.14.6.1.2ColumnhotlinksCurCfgTriggerNameread-onlycurrentA textual string containing the trigger name.
1.3.6.1.4.1.20301.2.7.18.2.1.14.6.1.3ColumnhotlinksCurCfgTriggerStateread-onlycurrentEnable/disable Trigger state.
1.3.6.1.4.1.20301.2.7.18.2.1.14.6.1.4ColumnhotlinksCurCfgTriggerPreemptStateread-onlycurrentEnable/disable Preemption state.
1.3.6.1.4.1.20301.2.7.18.2.1.14.6.1.5ColumnhotlinksCurCfgTriggerFdelayread-onlycurrentForward Delay setting (in secs).
1.3.6.1.4.1.20301.2.7.18.2.1.14.6.1.6ColumnhotlinksCurCfgTriggerMasterPortIndexread-onlycurrentThe master interface port number.
1.3.6.1.4.1.20301.2.7.18.2.1.14.6.1.7ColumnhotlinksCurCfgTriggerMasterTrunkread-onlycurrentThe master interface trunk number.
1.3.6.1.4.1.20301.2.7.18.2.1.14.6.1.8ColumnhotlinksCurCfgTriggerBackupPortIndexread-onlycurrentThe backup interface port number.
1.3.6.1.4.1.20301.2.7.18.2.1.14.6.1.9ColumnhotlinksCurCfgTriggerBackupTrunkread-onlycurrentThe backup interface trunk number.
1.3.6.1.4.1.20301.2.7.18.2.1.14.6.1.10ColumnhotlinksCurCfgTriggerDeleteread-onlycurrentDelete a Hot Links trigger configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.14.6.1.11ColumnhotlinksCurCfgTriggerMasterAdminkeyread-onlycurrentThe master interface admin key number.
1.3.6.1.4.1.20301.2.7.18.2.1.14.6.1.12ColumnhotlinksCurCfgTriggerBackupAdminkeyread-onlycurrentThe backup interface admin key number.
1.3.6.1.4.1.20301.2.7.18.2.1.14.6.1.17ColumnhotlinksCurCfgTriggerMasterPortAliasread-onlycurrentThe master interface port alias.
1.3.6.1.4.1.20301.2.7.18.2.1.14.6.1.18ColumnhotlinksCurCfgTriggerBackupPortAliasread-onlycurrentThe backup interface port alias.
1.3.6.1.4.1.20301.2.7.18.2.1.14.7TablehotlinksNewCfgTriggerTablenot-accessiblecurrentThe Hot Links Trigger Table.
1.3.6.1.4.1.20301.2.7.18.2.1.14.7.1RowhotlinksNewCfgTriggerTableEntrynot-accessiblecurrentA row in the Hot Links Trigger Table.
1.3.6.1.4.1.20301.2.7.18.2.1.14.7.1.1ColumnhotlinksNewCfgTriggerIdread-onlycurrentThe Trigger identifier.
1.3.6.1.4.1.20301.2.7.18.2.1.14.7.1.2ColumnhotlinksNewCfgTriggerNameread-writecurrentA textual string containing the trigger name.
1.3.6.1.4.1.20301.2.7.18.2.1.14.7.1.3ColumnhotlinksNewCfgTriggerStateread-writecurrentEnable/disable Trigger state.
1.3.6.1.4.1.20301.2.7.18.2.1.14.7.1.4ColumnhotlinksNewCfgTriggerPreemptStateread-writecurrentEnable/disable Preemption state.
1.3.6.1.4.1.20301.2.7.18.2.1.14.7.1.5ColumnhotlinksNewCfgTriggerFdelayread-writecurrentForward Delay setting (in secs).
1.3.6.1.4.1.20301.2.7.18.2.1.14.7.1.6ColumnhotlinksNewCfgTriggerMasterPortIndexread-writecurrentThe master interface port number.
1.3.6.1.4.1.20301.2.7.18.2.1.14.7.1.7ColumnhotlinksNewCfgTriggerMasterTrunkread-writecurrentThe master interface trunk number.
1.3.6.1.4.1.20301.2.7.18.2.1.14.7.1.8ColumnhotlinksNewCfgTriggerBackupPortIndexread-writecurrentThe backup interface port number.
1.3.6.1.4.1.20301.2.7.18.2.1.14.7.1.9ColumnhotlinksNewCfgTriggerBackupTrunkread-writecurrentThe backup interface trunk number.
1.3.6.1.4.1.20301.2.7.18.2.1.14.7.1.10ColumnhotlinksNewCfgTriggerDeleteread-writecurrentDelete a Hot Links trigger configuration.
1.3.6.1.4.1.20301.2.7.18.2.1.14.7.1.11ColumnhotlinksNewCfgTriggerMasterAdminkeyread-writecurrentThe master interface admin key number.
1.3.6.1.4.1.20301.2.7.18.2.1.14.7.1.12ColumnhotlinksNewCfgTriggerBackupAdminkeyread-writecurrentThe backup interface admin key number.
1.3.6.1.4.1.20301.2.7.18.2.1.14.7.1.17ColumnhotlinksNewCfgTriggerMasterPortAliasread-writecurrentThe master interface port alias.
1.3.6.1.4.1.20301.2.7.18.2.1.14.7.1.18ColumnhotlinksNewCfgTriggerBackupPortAliasread-writecurrentThe backup interface port alias.
1.3.6.1.4.1.20301.2.7.18.2.1.14.8ScalarhotlinksCurCfgBpduStateread-onlycurrentEnable/disable Hot Links BPDU flood setting.
1.3.6.1.4.1.20301.2.7.18.2.1.14.9ScalarhotlinksNewCfgBpduStateread-writecurrentEnable/disable Hot Links BPDU flood setting.
1.3.6.1.4.1.20301.2.7.18.2.1.14.10ScalarhotlinksCurCfgFdbUpdateRateread-onlycurrentHot Links FDB update rate (packets per second).
1.3.6.1.4.1.20301.2.7.18.2.1.14.11ScalarhotlinksNewCfgFdbUpdateRateread-writecurrentHot Links FDB update rate (packets per second).
1.3.6.1.4.1.20301.2.7.18.2.1.15NodelldpCfg
1.3.6.1.4.1.20301.2.7.18.2.1.15.1ScalarlldpPortTableMaxEntread-onlycurrentThe maximum number of rows in the port configuration host table.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2TablelldpCurCfgPortTablenot-accessiblecurrentThe table of LLDP port configuration in the current_configuration block.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2.1RowlldpCurCfgPortEntrynot-accessiblecurrentA row in the LLDP port configuration table in the current_configuration block.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2.1.1ColumnlldpCurCfgPortIndxread-onlycurrentThe index of the row in LLDP port configurations table.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2.1.2ColumnlldpCurCfgPortAdmStatread-onlycurrentThis is the admin status of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2.1.3ColumnlldpCurCfgPortSnmpTrapread-onlycurrentThis is the SNMP trap notification state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2.1.4ColumnlldpCurCfgPortportdesctlvread-onlycurrentThis is the Port Description TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2.1.5ColumnlldpCurCfgPortsysnametlvread-onlycurrentThis is the System Name TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2.1.6ColumnlldpCurCfgPortsysdescrtlvread-onlycurrentThis is the System Description TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2.1.7ColumnlldpCurCfgPortsyscaptlvread-onlycurrentThis is the System Capabilities TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2.1.8ColumnlldpCurCfgPortmgmtaddrtlvread-onlycurrentThis is the Management Address TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2.1.9ColumnlldpCurCfgPortportvidtlvread-onlycurrentThis is the Port VLAN ID TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2.1.10ColumnlldpCurCfgPortportprottlvread-onlycurrentThis is the Port and Protocol VLAN ID TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2.1.11ColumnlldpCurCfgPortvlannametlvread-onlycurrentThis is the VLAN Name TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2.1.12ColumnlldpCurCfgPortprotidtlvread-onlycurrentThis is the Protocol Identity TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2.1.13ColumnlldpCurCfgPortmacphytlvread-onlycurrentThis is the MAC/PHY Configuration/Status TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2.1.14ColumnlldpCurCfgPortpowermditlvread-onlycurrentThis is the Power Via MDI TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2.1.15ColumnlldpCurCfgPortlinkaggrtlvread-onlycurrentThis is the Link Aggregation TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2.1.16ColumnlldpCurCfgPortframesztlvread-onlycurrentThis is the Maximum Frame Size TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.2.1.20ColumnlldpCurCfgPortAliasread-onlycurrentThe alias of the row in LLDP port configurations table.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3TablelldpNewCfgPortTablenot-accessiblecurrentThe table of LLDP port configuration in the new_configuration block.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1RowlldpNewCfgPortEntrynot-accessiblecurrentA row in the LLDP port configuration table in the new_configuration block.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1.1ColumnlldpNewCfgPortIndxread-onlycurrentThe index of the row in LLDP port configurations table.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1.2ColumnlldpNewCfgPortAdmStatread-writecurrentThis is the admin status of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1.3ColumnlldpNewCfgPortSnmpTrapread-writecurrentThis is the SNMP trap notification state of the LLDP port
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1.4ColumnlldpNewCfgPortportdesctlvread-writecurrentThis is the Port Description TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1.5ColumnlldpNewCfgPortsysnametlvread-writecurrentThis is the System Name TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1.6ColumnlldpNewCfgPortsysdescrtlvread-writecurrentThis is the System Description TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1.7ColumnlldpNewCfgPortsyscaptlvread-writecurrentThis is the System Capabilities TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1.8ColumnlldpNewCfgPortmgmtaddrtlvread-writecurrentThis is the Management Address TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1.9ColumnlldpNewCfgPortportvidtlvread-writecurrentThis is the Port VLAN ID TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1.10ColumnlldpNewCfgPortportprottlvread-writecurrentThis is the Port and Protocol VLAN ID TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1.11ColumnlldpNewCfgPortvlannametlvread-writecurrentThis is the VLAN Name TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1.12ColumnlldpNewCfgPortprotidtlvread-writecurrentThis is the Protocol Identity TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1.13ColumnlldpNewCfgPortmacphytlvread-writecurrentThis is the MAC/PHY Configuration/Status TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1.14ColumnlldpNewCfgPortpowermditlvread-writecurrentThis is the Power Via MDI TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1.15ColumnlldpNewCfgPortlinkaggrtlvread-writecurrentThis is the Link Aggregation TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1.16ColumnlldpNewCfgPortframesztlvread-writecurrentThis is the Maximum Frame Size TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1.17ColumnlldpNewCfgPortalltlvread-writecurrentSet the corresponding state for all the LLDP port's TLVs. other(3) is returned when the object is read.
1.3.6.1.4.1.20301.2.7.18.2.1.15.3.1.20ColumnlldpNewCfgPortAliasread-onlycurrentThe port of the row in LLDP port configurations table.
1.3.6.1.4.1.20301.2.7.18.2.1.15.4NodelldpGeneral
1.3.6.1.4.1.20301.2.7.18.2.1.15.4.1ScalarlldpCurCfgStateread-onlycurrentLLDP global state.
1.3.6.1.4.1.20301.2.7.18.2.1.15.4.2ScalarlldpNewCfgStateread-writecurrentGlobally turn LLDP on or off.
1.3.6.1.4.1.20301.2.7.18.2.1.15.4.3ScalarlldpCurCfgMsgTxIntread-onlycurrentLLDP message transmission interval for LLDPDU.
1.3.6.1.4.1.20301.2.7.18.2.1.15.4.4ScalarlldpNewCfgMsgTxIntread-writecurrentLLDP message transmission interval for LLDPDU.
1.3.6.1.4.1.20301.2.7.18.2.1.15.4.5ScalarlldpCurCfgMsgTxHldread-onlycurrentLLDP message transmission holdtime-multiplier.
1.3.6.1.4.1.20301.2.7.18.2.1.15.4.6ScalarlldpNewCfgMsgTxHldread-writecurrentLLDP message transmission holdtime-multiplier.
1.3.6.1.4.1.20301.2.7.18.2.1.15.4.7ScalarlldpCurCfgNotifIntread-onlycurrentLLDP minimum SNMP trap notification interval.
1.3.6.1.4.1.20301.2.7.18.2.1.15.4.8ScalarlldpNewCfgNotifIntread-writecurrentLLDP minimum SNMP trap notification interval.
1.3.6.1.4.1.20301.2.7.18.2.1.15.4.9ScalarlldpCurCfgTxDelayread-onlycurrentLLDP delay interval between advertisements.
1.3.6.1.4.1.20301.2.7.18.2.1.15.4.10ScalarlldpNewCfgTxDelayread-writecurrentLLDP delay interval between advertisements.
1.3.6.1.4.1.20301.2.7.18.2.1.15.4.11ScalarlldpCurCfgReinitDelayread-onlycurrentLLDP reinit delay interval.
1.3.6.1.4.1.20301.2.7.18.2.1.15.4.12ScalarlldpNewCfgReinitDelayread-writecurrentLLDP reinit delay interval.
1.3.6.1.4.1.20301.2.7.18.2.1.18NodevlagCfg
1.3.6.1.4.1.20301.2.7.18.2.1.18.1NodevlagIslCfg
1.3.6.1.4.1.20301.2.7.18.2.1.18.1.1ScalarvlagCurIslCfgPortChannelread-onlycurrentCurrent vLAG ISL portchannel
1.3.6.1.4.1.20301.2.7.18.2.1.18.1.2ScalarvlagNewIslCfgPortChannelread-writecurrentThis object is used to change the vLAG ISL portchannel.
1.3.6.1.4.1.20301.2.7.18.2.1.18.1.3ScalarvlagCurIslCfgAdminKeyread-onlycurrentCurrent vLAG ISL admin key.
1.3.6.1.4.1.20301.2.7.18.2.1.18.1.4ScalarvlagNewIslCfgAdminKeyread-writecurrentThis object is used to change the vLAG ISL admin key.
1.3.6.1.4.1.20301.2.7.18.2.1.18.4ScalarvlagCurCfgSwitchPriorityread-onlycurrentCurrent vLAG switch priority
1.3.6.1.4.1.20301.2.7.18.2.1.18.5ScalarvlagNewCfgSwitchPriorityread-writecurrentThis object is used to change the vLAG priority of this switch.
1.3.6.1.4.1.20301.2.7.18.2.1.18.6TablevlagCurCfgTrunkTablenot-accessiblecurrentA table of objects of the vLAG groups configured in this switch.
1.3.6.1.4.1.20301.2.7.18.2.1.18.6.1RowvlagCurCfgTrunkTableEntrynot-accessiblecurrentThe configuration objects for an vLAG group.
1.3.6.1.4.1.20301.2.7.18.2.1.18.6.1.1ColumnvlagCurCfgTrunkIndexread-onlycurrentThe identifier of the trunk group.
1.3.6.1.4.1.20301.2.7.18.2.1.18.6.1.2ColumnvlagCurCfgTrunkStateread-onlycurrentThe current administrative state of the vLAG group.
1.3.6.1.4.1.20301.2.7.18.2.1.18.7TablevlagNewCfgTrunkTablenot-accessiblecurrentA table of objects of the vLAG groups configured in this switch.
1.3.6.1.4.1.20301.2.7.18.2.1.18.7.1RowvlagNewCfgTrunkTableEntrynot-accessiblecurrentThe configuration objects for an vLAG group.
1.3.6.1.4.1.20301.2.7.18.2.1.18.7.1.1ColumnvlagNewCfgTrunkIndexread-writecurrentThe identifier of the trunk group.
1.3.6.1.4.1.20301.2.7.18.2.1.18.7.1.2ColumnvlagNewCfgTrunkStateread-writecurrentThe new administrative state of the vLAG group.
1.3.6.1.4.1.20301.2.7.18.2.1.18.8TablevlagCurCfgLacpTablenot-accessiblecurrentA table of objects of the vLAG groups configured in this switch.
1.3.6.1.4.1.20301.2.7.18.2.1.18.8.1RowvlagCurCfgLacpTableEntrynot-accessiblecurrentThe configuration objects for an vLAG group.
1.3.6.1.4.1.20301.2.7.18.2.1.18.8.1.1ColumnvlagCurCfgLacpKeyread-onlycurrentThe identifier of the trunk group.
1.3.6.1.4.1.20301.2.7.18.2.1.18.8.1.2ColumnvlagCurCfgLacpStateread-onlycurrentThe current administrative state of the vLAG group.
1.3.6.1.4.1.20301.2.7.18.2.1.18.9TablevlagNewCfgLacpTablenot-accessiblecurrentA table of objects of the vLAG groups configured in this switch.
1.3.6.1.4.1.20301.2.7.18.2.1.18.9.1RowvlagNewCfgLacpTableEntrynot-accessiblecurrentThe configuration objects for an vLAG group.
1.3.6.1.4.1.20301.2.7.18.2.1.18.9.1.1ColumnvlagNewCfgLacpKeyread-onlycurrentThe identifier of the trunk group.
1.3.6.1.4.1.20301.2.7.18.2.1.18.9.1.2ColumnvlagNewCfgLacpStateread-writecurrentThe new administrative state of the vLAG group.
1.3.6.1.4.1.20301.2.7.18.2.1.18.10ScalarvlagCurCfgHlthchkPeerIpread-onlycurrentThe current Health check Peer ip4 address.
1.3.6.1.4.1.20301.2.7.18.2.1.18.11ScalarvlagNewCfgHlthchkPeerIpread-writecurrentThe New Health check Peer ip4 address.
1.3.6.1.4.1.20301.2.7.18.2.1.18.12ScalarvlagCurCfgTierIdread-onlycurrentCurrent vLAG Tier ID
1.3.6.1.4.1.20301.2.7.18.2.1.18.13ScalarvlagNewCfgTierIdread-writecurrentThis object is used to change the vLAG Tier ID of this switch. vLAG consist of 2 vLAG peer switches connected by ISL link, the system formed by the switches is…
1.3.6.1.4.1.20301.2.7.18.2.1.18.14ScalarvlagCurCfgStartupDelayIntervalread-onlycurrentCurrent vLAG Startup delay interval
1.3.6.1.4.1.20301.2.7.18.2.1.18.15ScalarvlagNewCfgStartupDelayIntervalread-writecurrentThis object is used to change the vLAG startup Delay Timer interval. The Timer is used to prevent traffic lost for the vLAG ports may be up before the ISL is u…
1.3.6.1.4.1.20301.2.7.18.2.1.18.16ScalarvlagCurCfgGlobalEnableread-onlycurrentCurrent vLAG global status on switch.
1.3.6.1.4.1.20301.2.7.18.2.1.18.17ScalarvlagNewCfgGlobalEnableread-writecurrentSet true to enable vLAG globally or Set false to disable vLAG globally on switch.
1.3.6.1.4.1.20301.2.7.18.2.1.18.18ScalarvlagCurCfgHlthchkConnectRetryIntervalread-onlycurrentIn case of healtcheck TCP connection can not be established, interval at which the retry attempt will be made to connect to the peer.
1.3.6.1.4.1.20301.2.7.18.2.1.18.19ScalarvlagNewCfgHlthchkConnectRetryIntervalread-writecurrentIn case of healtcheck TCP connection can not be established, interval at which the retry attempt will be made to connect to the peer.
1.3.6.1.4.1.20301.2.7.18.2.1.18.20ScalarvlagCurCfgHlthchkKeepaliveAttemptsread-onlycurrentNumber of keepalive attempts made before declaring peer is down. Within this time, atleast one of the keepalive message should have been received from the peer.
1.3.6.1.4.1.20301.2.7.18.2.1.18.21ScalarvlagNewCfgHlthchkKeepaliveAttemptsread-writecurrentNumber of keepalive attempts made before declaring peer is down.Within this time, atleast one of the keepalive message should have been received from the peer.
1.3.6.1.4.1.20301.2.7.18.2.1.18.22ScalarvlagCurCfgHlthchkKeepaliveIntervalread-onlycurrentInterval between keepalives sent over healthcheck TCP session to keep the session alive.
1.3.6.1.4.1.20301.2.7.18.2.1.18.23ScalarvlagNewCfgHlthchkKeepaliveIntervalread-writecurrentInterval between keepalives sent over healthcheck TCP session to keep the session alive.
1.3.6.1.4.1.20301.2.7.18.2.1.18.24ScalarvlagCurCfgAutoRecoveryIntervalread-onlycurrentCurrent vLAG Auto Recovery interval
1.3.6.1.4.1.20301.2.7.18.2.1.18.25ScalarvlagNewCfgAutoRecoveryIntervalread-writecurrentThis object is used to change the vLAG Auto Recovery Timer interval. The Timer is used to prevent all vlag ports stay in ErrDisabled state when booting two vLA…
1.3.6.1.4.1.20301.2.7.18.2.1.20NodeslpCfg
1.3.6.1.4.1.20301.2.7.18.2.1.20.1ScalarslpCurCfgGlobalEnableread-onlycurrentCurrent SLP global status on switch.
1.3.6.1.4.1.20301.2.7.18.2.1.20.2ScalarslpNewCfgGlobalEnableread-writecurrentSet to enabled to enable SLP globally or Set to disabled to disable SLP globally on switch.
1.3.6.1.4.1.20301.2.7.18.2.1.20.3ScalarslpCurCfgActiveDaDisEnableread-onlycurrentCurrent SLP active directory agent discovery status on switch.
1.3.6.1.4.1.20301.2.7.18.2.1.20.4ScalarslpNewCfgActiveDaDisEnableread-writecurrentSet to enabled to enable SLP active directory agent discovery or Set to disabled to disable SLP active directory agent discovery on switch.
1.3.6.1.4.1.20301.2.7.18.2.1.20.5ScalarslpCurCfgActiveDaDisStartWaitTimeread-onlycurrentCurrent SLP active directory agent discovery start wait time measured in seconds.
1.3.6.1.4.1.20301.2.7.18.2.1.20.6ScalarslpNewCfgActiveDaDisStartWaitTimeread-writecurrentThis object is used to change the SLP active directory agent discovery start wait time measured in seconds.
1.3.6.1.4.1.20301.2.7.18.2.2Nodelayer2Stats
1.3.6.1.4.1.20301.2.7.18.2.2.1NodefdbStats
1.3.6.1.4.1.20301.2.7.18.2.2.1.3ScalarfdbStatsCurrentread-onlycurrentCurrent number of entries in the Forwarding Database.
1.3.6.1.4.1.20301.2.7.18.2.2.1.4ScalarfdbStatsHiwatread-onlycurrentHighest number of entries recorded at any given time in the Forwarding Database.
1.3.6.1.4.1.20301.2.7.18.2.2.1.11ScalarfdbStatsClearread-writecurrentClear FDB statistics
1.3.6.1.4.1.20301.2.7.18.2.2.2NodestpStats
1.3.6.1.4.1.20301.2.7.18.2.2.2.1TablestgStatsPortTablenot-accessiblecurrentThe table of Spanning Tree Group port statistics.
1.3.6.1.4.1.20301.2.7.18.2.2.2.1.1RowstgStatsPortTableEntrynot-accessiblecurrentStatistics about port of a particular Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.2.2.1.1.1ColumnstgStatsStpIndexread-onlycurrentThe identifier of a particular Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.2.2.1.1.2ColumnstgStatsPortIndexread-onlycurrentThe port identifier of a particular Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.2.2.1.1.3ColumnstgStatsPortRcvBpdusread-onlycurrentNumber of total BPDU's received on this port.
1.3.6.1.4.1.20301.2.7.18.2.2.2.1.1.4ColumnstgStatsPortRcvTcnBpdusread-onlycurrentNumber of TCN BPDU's received on this port.
1.3.6.1.4.1.20301.2.7.18.2.2.2.1.1.5ColumnstgStatsPortLastTcnRcvread-onlycurrentTime of last TCN BPDU's received on this port.
1.3.6.1.4.1.20301.2.7.18.2.2.2.1.1.6ColumnstgStatsPortXmtBpdusread-onlycurrentNumber of total BPDU's transmitted on this port.
1.3.6.1.4.1.20301.2.7.18.2.2.2.1.1.7ColumnstgStatsPortXmtTcnBpdusread-onlycurrentNumber of TCN BPDU's trasmitted from the port.
1.3.6.1.4.1.20301.2.7.18.2.2.2.1.1.8ColumnstgStatsPortLastTcnXmtread-onlycurrentTime of last TCN BPDU's transmitted on this port.
1.3.6.1.4.1.20301.2.7.18.2.2.2.1.1.9ColumnstgStatsPortDropBpdusread-onlycurrentNumber of total BPDU's dropped on this port.
1.3.6.1.4.1.20301.2.7.18.2.2.2.1.1.10ColumnstgStatsPortAliasread-onlycurrentThe port alias of a particular Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.2.4NodelacpStats
1.3.6.1.4.1.20301.2.7.18.2.2.4.1TablelacpStatsTablenot-accessiblecurrentThe table of LACP Stats.
1.3.6.1.4.1.20301.2.7.18.2.2.4.1.1RowlacpStatsTableEntrynot-accessiblecurrentLacp status info.
1.3.6.1.4.1.20301.2.7.18.2.2.4.1.1.1ColumnlacpStatsIndexread-onlycurrentIndex
1.3.6.1.4.1.20301.2.7.18.2.2.4.1.1.2ColumnlacpdusRxread-onlycurrentValid LACPDUs received
1.3.6.1.4.1.20301.2.7.18.2.2.4.1.1.3ColumnmarkerpdusRxread-onlycurrentValid Marker PDUs received
1.3.6.1.4.1.20301.2.7.18.2.2.4.1.1.4ColumnmarkerresponsepdusRxread-onlycurrentValid Marker Rsp PDUs received
1.3.6.1.4.1.20301.2.7.18.2.2.4.1.1.5ColumnunknownRxread-onlycurrentUnknown version/TLV type
1.3.6.1.4.1.20301.2.7.18.2.2.4.1.1.6ColumnillegalRxread-onlycurrentIllegal subtype received
1.3.6.1.4.1.20301.2.7.18.2.2.4.1.1.7ColumnlacpdusTxread-onlycurrentLACPDUs transmitted
1.3.6.1.4.1.20301.2.7.18.2.2.4.1.1.8ColumnmarkerpdusTxread-onlycurrentMarket PDUs transmitted
1.3.6.1.4.1.20301.2.7.18.2.2.4.1.1.9ColumnmarkerresponsepdusTxread-onlycurrentMarker Rsp PDUs transmitted
1.3.6.1.4.1.20301.2.7.18.2.2.4.1.1.10ColumnlacpClearStatsread-writecurrentSetting this to clear(2) results in clearing the LACP statistics.
1.3.6.1.4.1.20301.2.7.18.2.2.4.1.1.11ColumnlacpStatsPortAliasread-onlycurrentPort Alias.
1.3.6.1.4.1.20301.2.7.18.2.2.6NodehotlinksStats
1.3.6.1.4.1.20301.2.7.18.2.2.6.1TablehotlinksStatsTriggerTablenot-accessiblecurrentThe Hot Links Trigger Table Stats.
1.3.6.1.4.1.20301.2.7.18.2.2.6.1.1RowhotlinksStatsTriggerTableEntrynot-accessiblecurrentA row in the Hot Links Trigger Table Stats.
1.3.6.1.4.1.20301.2.7.18.2.2.6.1.1.1ColumnhotlinksStatsTriggerIdread-onlycurrentThe Trigger identifier.
1.3.6.1.4.1.20301.2.7.18.2.2.6.1.1.2ColumnhotlinksStatsTriggerNameread-onlycurrentA textual string containing the trigger name.
1.3.6.1.4.1.20301.2.7.18.2.2.6.1.1.3ColumnhotlinksStatsTriggerMasterActiveread-onlycurrentThe number of times the master interface was set to active.
1.3.6.1.4.1.20301.2.7.18.2.2.6.1.1.4ColumnhotlinksStatsTriggerBackupActiveread-onlycurrentThe number of times the backup interface was set to active.
1.3.6.1.4.1.20301.2.7.18.2.2.6.1.1.5ColumnhotlinksStatsTriggerFdbUpdateread-onlycurrentThe number of times an FDB update was performed.
1.3.6.1.4.1.20301.2.7.18.2.2.6.1.1.6ColumnhotlinksStatsTriggerFdbFailedread-onlycurrentThe number of times an FDB update failed.
1.3.6.1.4.1.20301.2.7.18.2.2.7NodelldpStats
1.3.6.1.4.1.20301.2.7.18.2.2.7.1ScalarlldpStatsTableMaxEntread-onlycurrentThe maximum number of rows in the statistics host table.
1.3.6.1.4.1.20301.2.7.18.2.2.7.2TablelldpStatsTablenot-accessiblecurrentThe table of LLDP statistics.
1.3.6.1.4.1.20301.2.7.18.2.2.7.2.1RowlldpStatsTableEntrynot-accessiblecurrentLLDP statistics info.
1.3.6.1.4.1.20301.2.7.18.2.2.7.2.1.1ColumnlldpStatsIndexread-onlycurrentThe index of the row in LLDP port statistics.
1.3.6.1.4.1.20301.2.7.18.2.2.7.2.1.2ColumnlldpStatsFramesOutTotalread-onlycurrentThe total number of LLDP frames transmitted in this port.
1.3.6.1.4.1.20301.2.7.18.2.2.7.2.1.3ColumnlldpStatsFramesInTotalread-onlycurrentThe total number of LLDP frames received in this port.
1.3.6.1.4.1.20301.2.7.18.2.2.7.2.1.4ColumnlldpStatsFramesInErrorsTotalread-onlycurrentThe total number of erroneous LLDP frames received in this port.
1.3.6.1.4.1.20301.2.7.18.2.2.7.2.1.5ColumnlldpStatsFramesDiscardedTotalread-onlycurrentThe total number of received LLDP frames discarded in this port.
1.3.6.1.4.1.20301.2.7.18.2.2.7.2.1.6ColumnlldpStatsTLVsUnrecognizedTotalread-onlycurrentThe total number of unrecognized TLVs in this port.
1.3.6.1.4.1.20301.2.7.18.2.2.7.2.1.7ColumnlldpStatsAgeoutsTotalread-onlycurrentThe total number of neighbor's information deleted in this port.
1.3.6.1.4.1.20301.2.7.18.2.2.7.2.1.8ColumnlldpStatsClearread-writecurrentSetting this to clear(2) results in clearing the LLDP statistics.
1.3.6.1.4.1.20301.2.7.18.2.2.7.2.1.9ColumnlldpStatsPortAliasread-onlycurrentThe alias of the row in LLDP port statistics.
1.3.6.1.4.1.20301.2.7.18.2.2.7.3ScalarlldpStatsClearAllread-writecurrentSetting this to clear(2) results in clearing the LLDP statistics for all the ports.
1.3.6.1.4.1.20301.2.7.18.2.2.11NodevlagStats
1.3.6.1.4.1.20301.2.7.18.2.2.11.1NodevlagStatsSystem
1.3.6.1.4.1.20301.2.7.18.2.2.11.1.1ScalarvlagStatsClearread-writecurrentSetting this object to 'clear' will reset all statistics objects of VLAG. A get action of this object will always return 'other'. Setting this object to 'other…
1.3.6.1.4.1.20301.2.7.18.2.2.11.2NodevlagStatsIsl
1.3.6.1.4.1.20301.2.7.18.2.2.11.2.1ScalarvlagStatsIslInOctetsread-onlycurrentThe total number of vlag ISL octets received.
1.3.6.1.4.1.20301.2.7.18.2.2.11.2.2ScalarvlagStatsIslInPacketsread-onlycurrentThe total number of vlag ISL packets received.
1.3.6.1.4.1.20301.2.7.18.2.2.11.2.3ScalarvlagStatsIslOutOctetsread-onlycurrentThe total number of vlag ISL octets sent.
1.3.6.1.4.1.20301.2.7.18.2.2.11.2.4ScalarvlagStatsIslOutPacketsread-onlycurrentThe total number of vlag ISL packets sent.
1.3.6.1.4.1.20301.2.7.18.2.2.11.3NodevlagStatsHealth
1.3.6.1.4.1.20301.2.7.18.2.2.11.4NodevlagStatsLacp
1.3.6.1.4.1.20301.2.7.18.2.2.11.5NodevlagStatsPdu
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.1ScalarvlagStatsPduSentRoleElectionread-onlycurrentThe total number of vlag PDUs sent for role elections
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.2ScalarvlagStatsPduSentSystemInforead-onlycurrentThe total number of vlag PDUs sent for system info
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.7ScalarvlagStatsPduSentFdbDynamicAddread-onlycurrentThe total number of vlag PDUs sent for addition of FDB dynamic entry
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.8ScalarvlagStatsPduSentFdbDynamicDelread-onlycurrentThe total number of vlag PDUs sent for deletion of FDB dynamic entry
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.9ScalarvlagStatsPduSentFdbInactiveAddread-onlycurrentThe total number of vlag PDUs sent for addition of FDB inactive entry
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.10ScalarvlagStatsPduSentFdbInactiveDelread-onlycurrentThe total number of vlag PDUs sent for deletion of FDB inactive entry
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.13ScalarvlagStatsPduSentHlthCheckread-onlycurrentThe total number of vlag PDUs sent for Health check
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.15ScalarvlagStatsPduSentOtherread-onlycurrentThe total number of vlag PDUs sent for others
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.16ScalarvlagStatsPduSentUnknownread-onlycurrentThe total number of vlag PDUs sent for unknowns
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.17ScalarvlagStatsPduRcvRoleElectionread-onlycurrentThe total number of vlag PDUs received for role elections
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.18ScalarvlagStatsPduRcvSystemInforead-onlycurrentThe total number of vlag PDUs received for system info
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.23ScalarvlagStatsPduRcvFdbDynamicAddread-onlycurrentThe total number of vlag PDUs received for addition of FDB dynamic entry
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.24ScalarvlagStatsPduRcvFdbDynamicDelread-onlycurrentThe total number of vlag PDUs received for deletion of FDB dynamic entry
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.25ScalarvlagStatsPduRcvFdbInactiveAddread-onlycurrentThe total number of vlag PDUs received for addition of FDB inactive entry
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.26ScalarvlagStatsPduRcvFdbInactiveDelread-onlycurrentThe total number of vlag PDUs received for deletion of FDB inactive entry
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.29ScalarvlagStatsPduRcvHlthCheckread-onlycurrentThe total number of vlag PDUs received for Health check
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.31ScalarvlagStatsPduRcvOtherread-onlycurrentThe total number of vlag PDUs received for others
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.32ScalarvlagStatsPduRcvUnknownread-onlycurrentThe total number of vlag PDUs received for unknowns
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.33ScalarvlagStatsPduSentPeerInstanceEnableread-onlycurrentThe total number of vlag PDUs sent for peer instance enable
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.34ScalarvlagStatsPduSentPeerInstanceDisableread-onlycurrentThe total number of vlag PDUs sent for peer instance disable
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.35ScalarvlagStatsPduSentISLHelloread-onlycurrentThe total number of vlag PDUs sent for ISL hello
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.36ScalarvlagStatsPduRcvISLHelloread-onlycurrentThe total number of vlag PDUs received for ISL hello
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.37ScalarvlagStatsPduRcvPeerInstanceEnableread-onlycurrentThe total number of vlag PDUs received for peer instance enable
1.3.6.1.4.1.20301.2.7.18.2.2.11.5.38ScalarvlagStatsPduRcvPeerInstanceDisableread-onlycurrentThe total number of vlag PDUs received for peer instance disable
1.3.6.1.4.1.20301.2.7.18.2.2.11.6NodevlagStatsIgmp
1.3.6.1.4.1.20301.2.7.18.2.2.11.6.1ScalarvlagStatsIgmpReportsForwardedread-onlycurrentThe total number of IGMP reports forwarded to the peer
1.3.6.1.4.1.20301.2.7.18.2.2.11.6.2ScalarvlagStatsIgmpLeavesForwardedread-onlycurrentThe total number of IGMP leaves forwarded to the peer
1.3.6.1.4.1.20301.2.7.18.2.2.12NodeslpStats
1.3.6.1.4.1.20301.2.7.18.2.2.12.1TableslpStatsTxCountersTablenot-accessiblecurrentA table with all the SLP Send counters.
1.3.6.1.4.1.20301.2.7.18.2.2.12.1.1RowslpStatsTxCounterEntrynot-accessiblecurrentThe configuration objects for a SLP Send counter entry.
1.3.6.1.4.1.20301.2.7.18.2.2.12.1.1.1ColumnslpTxCounterIndexread-onlycurrentThe index of this counter.
1.3.6.1.4.1.20301.2.7.18.2.2.12.1.1.2ColumnslpTxCounterNameread-onlycurrentThe name of this counter.
1.3.6.1.4.1.20301.2.7.18.2.2.12.1.1.3ColumnslpTxCounterUnicastread-onlycurrentThe unicast value of this counter.
1.3.6.1.4.1.20301.2.7.18.2.2.12.1.1.4ColumnslpTxCounterMulticastread-onlycurrentThe multicast value of this counter.
1.3.6.1.4.1.20301.2.7.18.2.2.12.2TableslpStatsRxCountersTablenot-accessiblecurrentA table with all the SLP Receive counters.
1.3.6.1.4.1.20301.2.7.18.2.2.12.2.1RowslpStatsRxCounterEntrynot-accessiblecurrentThe configuration objects for a SLP Receive counter entry.
1.3.6.1.4.1.20301.2.7.18.2.2.12.2.1.1ColumnslpRxCounterIndexread-onlycurrentThe index this counter.
1.3.6.1.4.1.20301.2.7.18.2.2.12.2.1.2ColumnslpRxCounterNameread-onlycurrentThe name of this counter.
1.3.6.1.4.1.20301.2.7.18.2.2.12.2.1.3ColumnslpRxCounterUnicastread-onlycurrentThe unicast value of this counter.
1.3.6.1.4.1.20301.2.7.18.2.2.12.2.1.4ColumnslpRxCounterMulticastread-onlycurrentThe multicast value of this counter.
1.3.6.1.4.1.20301.2.7.18.2.2.12.3ScalarslpCountersClearread-writecurrentSetting this object to 'clear' will reset all SLP counters. A get action of this object will always return 'other'. Setting this object to 'other' is not allow…
1.3.6.1.4.1.20301.2.7.18.2.2.13NodecistStats
1.3.6.1.4.1.20301.2.7.18.2.2.13.1TablecistStatsPortTablenot-accessiblecurrentThe table of Common and Internal Spanning Tree port statistics.
1.3.6.1.4.1.20301.2.7.18.2.2.13.1.1RowcistStatsPortTableEntrynot-accessiblecurrentStatistics about port of Common and Internal Spanning Tree.
1.3.6.1.4.1.20301.2.7.18.2.2.13.1.1.1ColumncistStatsPortIndexread-onlycurrentThe port identifier of CIST.
1.3.6.1.4.1.20301.2.7.18.2.2.13.1.1.2ColumncistStatsPortRcvBpdusread-onlycurrentNumber of BPDU's received on this port.
1.3.6.1.4.1.20301.2.7.18.2.2.13.1.1.3ColumncistStatsPortRcvTcnBpdusread-onlycurrentNumber of TCN BPDU's received on this port.
1.3.6.1.4.1.20301.2.7.18.2.2.13.1.1.4ColumncistStatsPortLastTcnRcvread-onlycurrentTime of Last TCN BPDU's received on this port.
1.3.6.1.4.1.20301.2.7.18.2.2.13.1.1.5ColumncistStatsPortXmtBpdusread-onlycurrentNumber of BPDU's transmitted from the port.
1.3.6.1.4.1.20301.2.7.18.2.2.13.1.1.6ColumncistStatsPortXmtTcnBpdusread-onlycurrentNumber of TCN BPDU's transmitted from the port.
1.3.6.1.4.1.20301.2.7.18.2.2.13.1.1.7ColumncistStatsPortLastTcnXmtread-onlycurrentTime of Last TCN BPDU's transmitted from this port.
1.3.6.1.4.1.20301.2.7.18.2.2.13.1.1.8ColumncistStatsPortDropBpdusread-onlycurrentNumber of BPDU's dropped on the port.
1.3.6.1.4.1.20301.2.7.18.2.3Nodelayer2Info
1.3.6.1.4.1.20301.2.7.18.2.3.1NodefdbInfo
1.3.6.1.4.1.20301.2.7.18.2.3.1.1ScalarfdbClearread-writecurrentSetting this value to clear(2) clears the entire master FDB.
1.3.6.1.4.1.20301.2.7.18.2.3.1.2TablefdbTablenot-accessiblecurrentThe table of FDB entries.
1.3.6.1.4.1.20301.2.7.18.2.3.1.2.1RowfdbEntrynot-accessiblecurrentA row in the FDB table
1.3.6.1.4.1.20301.2.7.18.2.3.1.2.1.1ColumnfdbMacAddrread-onlycurrentThe MAC address for the FDB entry.
1.3.6.1.4.1.20301.2.7.18.2.3.1.2.1.2ColumnfdbVlanread-onlycurrentThe VLAN ID for the FDB entry.
1.3.6.1.4.1.20301.2.7.18.2.3.1.2.1.3ColumnfdbSrcPortIndexread-onlycurrentEither the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance has been seen. A…
1.3.6.1.4.1.20301.2.7.18.2.3.1.2.1.4ColumnfdbStateread-onlycurrentThe state of the FDB entry. The meanings of the values are : unknown(1) : the MAC address has not yet been learned by the switch but has only been seen as a de…
1.3.6.1.4.1.20301.2.7.18.2.3.1.2.1.7ColumnfdbSrcTrunkread-onlycurrentEither the value '0', or the trunk number of the trunk on which a frame having a source address equal to the value of the corresponding instance has been seen.…
1.3.6.1.4.1.20301.2.7.18.2.3.1.2.1.8ColumnfdbStatusread-onlycurrent'1' if it is permanent '0' if it is not permanent
1.3.6.1.4.1.20301.2.7.18.2.3.1.2.1.9ColumnfdbSrcPortAliasread-onlycurrentEither the value '0', or the port alias of the port on which a frame having a source address equal to the value of the corresponding instance has been seen. A …
1.3.6.1.4.1.20301.2.7.18.2.3.1.3TablemcastFdbTablenot-accessiblecurrentThe table of static multicast FDB entries.
1.3.6.1.4.1.20301.2.7.18.2.3.1.3.1RowmcastFdbEntrynot-accessiblecurrentA row in the static multicast FDB table
1.3.6.1.4.1.20301.2.7.18.2.3.1.3.1.1ColumnmcastFdbEntryIndexread-onlycurrentThe static multicast fdb entry index
1.3.6.1.4.1.20301.2.7.18.2.3.1.3.1.2ColumnmcastFdbMacAddrread-onlycurrentThe static multicast MAC address for the FDB entry.
1.3.6.1.4.1.20301.2.7.18.2.3.1.3.1.3ColumnmcastFdbVlanread-onlycurrentThe VLAN ID for the FDB entry.
1.3.6.1.4.1.20301.2.7.18.2.3.1.3.1.4ColumnmcastFdbSrcPortsread-onlycurrentThe multicast MAC address port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port …
1.3.6.1.4.1.20301.2.7.18.2.3.2NodestpInfo
1.3.6.1.4.1.20301.2.7.18.2.3.2.1TablestpInfoTablenot-accessiblecurrentThe table of Spanning Tree Group information.
1.3.6.1.4.1.20301.2.7.18.2.3.2.1.1RowstpInfoTableEntrynot-accessiblecurrentInformation about a particular Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.3.2.1.1.1ColumnstpInfoIndexread-onlycurrentThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.20301.2.7.18.2.3.2.1.1.2ColumnstpInfoTimeSinceTopChangeread-onlycurrentThe time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
1.3.6.1.4.1.20301.2.7.18.2.3.2.1.1.3ColumnstpInfoTopChangesread-onlycurrentThe total number of topology changes detected by this bridge since the management entity was last reset or initialized.
1.3.6.1.4.1.20301.2.7.18.2.3.2.1.1.4ColumnstpInfoDesignatedRootread-onlycurrentThe bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide…
1.3.6.1.4.1.20301.2.7.18.2.3.2.1.1.5ColumnstpInfoRootCostread-onlycurrentThe cost of the path to the root as seen from this bridge.
1.3.6.1.4.1.20301.2.7.18.2.3.2.1.1.6ColumnstpInfoRootPortIndexread-onlycurrentThe port number of the port which offers the lowest cost path from this bridge to the root bridge.
1.3.6.1.4.1.20301.2.7.18.2.3.2.1.1.7ColumnstpInfoMaxAgeread-onlycurrentThe maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is …
1.3.6.1.4.1.20301.2.7.18.2.3.2.1.1.8ColumnstpInfoHelloTimeread-onlycurrentThe amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become …
1.3.6.1.4.1.20301.2.7.18.2.3.2.1.1.9ColumnstpInfoForwardDelayread-onlycurrentThis time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The…
1.3.6.1.4.1.20301.2.7.18.2.3.2.1.1.10ColumnstpInfoHoldTimeread-onlycurrentThis time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth…
1.3.6.1.4.1.20301.2.7.18.2.3.2.1.1.11ColumnstpInfoPreRootread-onlycurrentThis is previous root bridge before current root bridge selected.
1.3.6.1.4.1.20301.2.7.18.2.3.2.1.1.12ColumnstpInfoPreRootPortread-onlycurrentThis is previous root port before current root port selected.
1.3.6.1.4.1.20301.2.7.18.2.3.2.1.1.13ColumnstpInfoRootReplaceTimeread-onlycurrentThis is Time of new root bridge replacing old root bridge.
1.3.6.1.4.1.20301.2.7.18.2.3.2.1.1.14ColumnstpInfoRootPortAliasread-onlycurrentThe port alias of the port which offers the lowest cost path from this bridge to the root bridge.
1.3.6.1.4.1.20301.2.7.18.2.3.2.2TablestpInfoPortTablenot-accessiblecurrentThe table of Spanning Tree Group port information.
1.3.6.1.4.1.20301.2.7.18.2.3.2.2.1RowstpInfoPortTableEntrynot-accessiblecurrentInformation about port configuration for a particular Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.3.2.2.1.1ColumnstpInfoPortStpIndexread-onlycurrentThe identifier of a particular Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.3.2.2.1.2ColumnstpInfoPortIndexread-onlycurrentThe port identifier of a particular Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.3.2.2.1.3ColumnstpInfoPortStateread-onlycurrentThe port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the …
1.3.6.1.4.1.20301.2.7.18.2.3.2.2.1.4ColumnstpInfoPortDesignatedRootread-onlycurrentThe unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po…
1.3.6.1.4.1.20301.2.7.18.2.3.2.2.1.5ColumnstpInfoPortDesignatedCostread-onlycurrentThe path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
1.3.6.1.4.1.20301.2.7.18.2.3.2.2.1.6ColumnstpInfoPortDesignatedBridgeread-onlycurrentThe Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
1.3.6.1.4.1.20301.2.7.18.2.3.2.2.1.7ColumnstpInfoPortDesignatedPortread-onlycurrentThe Port Identifier of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.20301.2.7.18.2.3.2.2.1.8ColumnstpInfoPortForwardTransitionsread-onlycurrentThe number of times this port has transitioned from the Learning state to the Forwarding state.
1.3.6.1.4.1.20301.2.7.18.2.3.2.2.1.9ColumnstpInfoPortPathCostread-onlycurrentThe path cost of the port.
1.3.6.1.4.1.20301.2.7.18.2.3.2.2.1.10ColumnstpInfoPortRoleread-onlycurrentThe port role. Returns unknown(7) when MSTP/RSTP is not enabled, otherwise returns appropriate port role.
1.3.6.1.4.1.20301.2.7.18.2.3.2.2.1.11ColumnstpInfoPortLinkTyperead-onlycurrentThe point-to-point status of the LAN segment attached to this port. A value of p2p (1) indicates that this port is being treated as if it is connected to a poi…
1.3.6.1.4.1.20301.2.7.18.2.3.2.2.1.12ColumnstpInfoPortEdgeread-onlycurrentThe port is an edge port or not. Returns disabled(2) when the port is not an edge port and returns enabled(1) when it is an edge port.
1.3.6.1.4.1.20301.2.7.18.2.3.2.2.1.13ColumnstpInfoPortExtGuardread-onlycurrentCurrent STP guard state. Not include BPDU Guard.
1.3.6.1.4.1.20301.2.7.18.2.3.2.2.1.14ColumnstpInfoPortPriorityread-onlycurrentThe four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
1.3.6.1.4.1.20301.2.7.18.2.3.2.2.1.15ColumnstpInfoPortAliasread-onlycurrentThe port alias of a particular Spanning Tree Group.
1.3.6.1.4.1.20301.2.7.18.2.3.3NodelacpInfo
1.3.6.1.4.1.20301.2.7.18.2.3.3.1TablelacpInfoAggrTablenot-accessiblecurrentThe table of LACP aggregator information.
1.3.6.1.4.1.20301.2.7.18.2.3.3.1.1RowlacpInfoAggrTableEntrynot-accessiblecurrentInformation about a LACP aggregator.
1.3.6.1.4.1.20301.2.7.18.2.3.3.1.1.1ColumnlacpInfoAggrIndexread-onlycurrentThe aggregator identifier.
1.3.6.1.4.1.20301.2.7.18.2.3.3.1.1.2ColumnlacpInfoAggrIdread-onlycurrentLACP aggregator ID
1.3.6.1.4.1.20301.2.7.18.2.3.3.1.1.3ColumnlacpInfoAggrMacread-onlycurrentLACP aggregator MAC address
1.3.6.1.4.1.20301.2.7.18.2.3.3.1.1.4ColumnlacpInfoAggrActSysPrioread-onlycurrentLACP aggregator actor system priority
1.3.6.1.4.1.20301.2.7.18.2.3.3.1.1.5ColumnlacpInfoAggrActSysIdread-onlycurrentLACP aggregator actor system ID
1.3.6.1.4.1.20301.2.7.18.2.3.3.1.1.6ColumnlacpInfoAggrIndivStateread-onlycurrentLACP aggregator individual state
1.3.6.1.4.1.20301.2.7.18.2.3.3.1.1.7ColumnlacpInfoAggrActAdminKeyread-onlycurrentLACP aggregator actor admin key
1.3.6.1.4.1.20301.2.7.18.2.3.3.1.1.8ColumnlacpInfoAggrActOperKeyread-onlycurrentLACP aggregator actor oper key
1.3.6.1.4.1.20301.2.7.18.2.3.3.1.1.9ColumnlacpInfoAggrPartSysPrioread-onlycurrentLACP aggregator partner system priority
1.3.6.1.4.1.20301.2.7.18.2.3.3.1.1.10ColumnlacpInfoAggrPartSysIdread-onlycurrentLACP aggregator partner system ID
1.3.6.1.4.1.20301.2.7.18.2.3.3.1.1.11ColumnlacpInfoAggrPartOperKeyread-onlycurrentLACP aggregator partner oper key
1.3.6.1.4.1.20301.2.7.18.2.3.3.1.1.12ColumnlacpInfoAggrReadyStateread-onlycurrentLACP aggregator ready state
1.3.6.1.4.1.20301.2.7.18.2.3.3.1.1.13ColumnlacpInfoAggrNumPortsread-onlycurrentNumber of ports in aggregator
1.3.6.1.4.1.20301.2.7.18.2.3.3.1.1.15ColumnlacpInfoAggrMinLinksread-onlycurrentMin Links of ports in aggregator
1.3.6.1.4.1.20301.2.7.18.2.3.3.2NodelacpInfoPort
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1TablelacpInfoPortGeneralTablenot-accessiblecurrentThe table of LACP port general information.
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1RowlacpInfoPortGeneralTableEntrynot-accessiblecurrentGeneral information about a LACP port.
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.1ColumnlacpInfoPortGeneralIndexread-onlycurrentThe port identifier.
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.2ColumnlacpInfoPortLacpEnaread-onlycurrentLACP enabled on port
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.3ColumnlacpInfoPortAdminEnaread-onlycurrentLACP port admin enabled
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.4ColumnlacpInfoPortActSysIdread-onlycurrentLACP port actor system ID
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.5ColumnlacpInfoPortActSysPrioread-onlycurrentLACP port actor system priority
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.6ColumnlacpInfoPortActAdminKeyread-onlycurrentLACP port actor admin key
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.7ColumnlacpInfoPortActOperKeyread-onlycurrentLACP port actor oper key
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.8ColumnlacpInfoPortActPortNumread-onlycurrentLACP port number
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.9ColumnlacpInfoPortActPortPrioread-onlycurrentLACP port priority
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.10ColumnlacpInfoPortIndivStateread-onlycurrentLACP port individual state
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.11ColumnlacpInfoSelAggrIdread-onlycurrentLACP port selected aggregator ID
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.12ColumnlacpInfoAttAggrIdread-onlycurrentLACP port attached aggregator ID
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.13ColumnlacpInfoPortReadyNread-onlycurrentTrue value for Ready_N flag indicates that the wait while timer has expired and it is waiting to attach to an aggregator. There is one Ready_N value for each p…
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.14ColumnlacpInfoPortNttread-onlycurrentNeed to transmit flag. True indicates that there is new protocol information that should be transmitted on the link.
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.15ColumnlacpInfoPortSelectedread-onlycurrentSelected flag value indicates that the selection logic has selected an appropriate Aggregator. A value of unselected indicates that no aggregator is currently …
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.16ColumnlacpInfoPortMovedread-onlycurrentPort Moved flag is set to true if the receive machine for a port is in the port_disabled state, and the combination of partner oper system and partner oper por…
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.17ColumnlacpInfoCollDetStateread-onlycurrentLACP port collision and detection state
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.18ColumnlacpInfoPortRxStateread-onlycurrentLACP port RX machine state
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.19ColumnlacpInfoPortMuxStateread-onlycurrentLACP port Mux machine state
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.20ColumnlacpInfoPortPerStateread-onlycurrentLACP port periodic machine state
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.21ColumnlacpInfoPortPerTraTimerread-onlycurrentPeriodic Transmit Timer
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.22ColumnlacpInfoPortCurWhileTimerread-onlycurrentCurrent While Timer
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.23ColumnlacpInfoPortOperStateread-onlycurrentThe current operational state of LACP on the port.
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.24ColumnlacpInfoPortGeneralPortAliasread-onlycurrentThe port alias.
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.1.1.25ColumnlacpInfoPortActPortAliasread-onlycurrentLACP port alias.
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.2TablelacpInfoPortAdminTablenot-accessiblecurrentThe table of LACP port admin information.
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.2.1RowlacpInfoPortAdminTableEntrynot-accessiblecurrentAdmin information about a LACP port.
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.2.1.1ColumnlacpInfoPortAdminIndexread-onlycurrentThe port identifier.
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.2.1.7ColumnlacpInfoPortActAdPortStateread-onlycurrentThe state of Actor Administrator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggreg…
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.2.1.8ColumnlacpInfoPortActAdActivread-onlycurrentThe state of Actor Administrator Port Activity
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.2.1.9ColumnlacpInfoPortActAdSyncread-onlycurrentThe state of Actor Administrator Port Synchronization
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.2.1.10ColumnlacpInfoPortActAdDefread-onlycurrentThe state of Actor Administrator Port Defaulted
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.2.1.11ColumnlacpInfoPortActAdTimeoutread-onlycurrentThe state of Actor Administrator Port Timeout
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.2.1.12ColumnlacpInfoPortActAdCollread-onlycurrentThe state of Actor Administrator Port Collecting
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.2.1.13ColumnlacpInfoPortActAdExpread-onlycurrentThe state of Actor Administrator Port Expired
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.2.1.14ColumnlacpInfoPortActAdAggrread-onlycurrentThe state of Actor Administrator Port Aggregation
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.2.1.15ColumnlacpInfoPortActAdDistread-onlycurrentThe state of Actor Administrator Port Distributing
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.2.1.25ColumnlacpInfoPortAdminPortAliasread-onlycurrentThe port alias.
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3TablelacpInfoPortOperTablenot-accessiblecurrentThe table of LACP port oper information.
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1RowlacpInfoPortOperTableEntrynot-accessiblecurrentOper information about a LACP port.
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.1ColumnlacpInfoPortOperIndexread-onlycurrentThe port identifier.
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.2ColumnlacpInfoPortPartOpSysPrioread-onlycurrentThe value of Partner Operator Port System Priority
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.3ColumnlacpInfoPortPartOpSysIdread-onlycurrentThe value of Partner Operator Port System ID
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.4ColumnlacpInfoPortPartOpKeyread-onlycurrentThe value of Partner Operator Port Key
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.5ColumnlacpInfoPortPartOpPortNumread-onlycurrentThe Partner Operator Port Number
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.6ColumnlacpInfoPortPartOpPortPrioread-onlycurrentThe value of Partner Operator Port Priority
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.7ColumnlacpInfoPortActOpPortStateread-onlycurrentThe state of Actor Operator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregation…
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.8ColumnlacpInfoPortActOpActivread-onlycurrentThe state of Actor Operator Port Activity
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.9ColumnlacpInfoPortActOpSyncread-onlycurrentThe state of Actor Operator Port Synchronization
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.10ColumnlacpInfoPortActOpDefread-onlycurrentThe state of Actor Operator Port Defaulted
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.11ColumnlacpInfoPortActOpTimeoutread-onlycurrentThe state of Actor Operator Port Timeout
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.12ColumnlacpInfoPortActOpCollread-onlycurrentThe state of Actor Operator Port Collecting
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.13ColumnlacpInfoPortActOpExpread-onlycurrentThe state of Actor Operator Port Expired
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.14ColumnlacpInfoPortActOpAggrread-onlycurrentThe state of Actor Operator Port Aggregation
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.15ColumnlacpInfoPortActOpDistread-onlycurrentThe state of Actor Operator Port Distributing
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.16ColumnlacpInfoPortPartOpPortStateread-onlycurrentThe state of Partner Operator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregati…
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.17ColumnlacpInfoPortPartOpActivread-onlycurrentThe state of Partner Operator Port Activity
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.18ColumnlacpInfoPortPartOpSyncread-onlycurrentThe state of Partner Operator Port Synchronization
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.19ColumnlacpInfoPortPartOpDefread-onlycurrentThe state of Partner Operator Port Defaulted
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.20ColumnlacpInfoPortPartOpTimeoutread-onlycurrentThe state of Partner Operator Port Timeout
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.21ColumnlacpInfoPortPartOpCollread-onlycurrentThe state of Partner Operator Port Collecting
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.22ColumnlacpInfoPortPartOpExpread-onlycurrentThe state of Partner Operator Port Expired
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.23ColumnlacpInfoPortPartOpAggrread-onlycurrentThe state of Partner Operator Port Aggregation
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.24ColumnlacpInfoPortPartOpDistread-onlycurrentThe state of Partner Operator Port Distributing
1.3.6.1.4.1.20301.2.7.18.2.3.3.2.3.1.25ColumnlacpInfoPortOperPortAliasread-onlycurrentThe port alias.
1.3.6.1.4.1.20301.2.7.18.2.3.4NodecistInfo
1.3.6.1.4.1.20301.2.7.18.2.3.4.1NodecistGeneralInfo
1.3.6.1.4.1.20301.2.7.18.2.3.4.1.1ScalarcistRootread-onlycurrentThe bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the C…
1.3.6.1.4.1.20301.2.7.18.2.3.4.1.2ScalarcistRootPathCostread-onlycurrentThe cost of the path to the CIST Root as seen from this bridge.
1.3.6.1.4.1.20301.2.7.18.2.3.4.1.3ScalarcistRootPortIndexread-onlycurrentThe Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge.
1.3.6.1.4.1.20301.2.7.18.2.3.4.1.4ScalarcistBridgeHelloTimeread-onlycurrentThe amount of time between the transmission of Configuration bridge PDUs in seconds.
1.3.6.1.4.1.20301.2.7.18.2.3.4.1.5ScalarcistBridgeMaxAgeread-onlycurrentThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
1.3.6.1.4.1.20301.2.7.18.2.3.4.1.6ScalarcistBridgeForwardDelayread-onlycurrentThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
1.3.6.1.4.1.20301.2.7.18.2.3.4.1.7ScalarcistRegionalRootread-onlycurrentThe bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used…
1.3.6.1.4.1.20301.2.7.18.2.3.4.1.8ScalarcistRegionalPathCostread-onlycurrentThe Cost of the path to the CIST Regional Root as seen from this bridge.
1.3.6.1.4.1.20301.2.7.18.2.3.4.1.9ScalarmstpDigestread-onlycurrentThe digest of the mstp.
1.3.6.1.4.1.20301.2.7.18.2.3.4.1.10ScalarcistPreRootread-onlycurrentThis is previous cist root bridge before current root bridge selected.
1.3.6.1.4.1.20301.2.7.18.2.3.4.1.11ScalarcistPreRootPortread-onlycurrentThis is previous cist root port before current root port selected.
1.3.6.1.4.1.20301.2.7.18.2.3.4.1.12ScalarcistRootReplaceTimeread-onlycurrentThis is Time of new cist root bridge replacing old cist root bridge.
1.3.6.1.4.1.20301.2.7.18.2.3.4.1.13ScalarcistRootPortAliasread-onlycurrentThe Port Alias of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge.
1.3.6.1.4.1.20301.2.7.18.2.3.4.2TablecistInfoPortTablenot-accessiblecurrentThe table of CIST Port information.
1.3.6.1.4.1.20301.2.7.18.2.3.4.2.1RowcistInfoPortTableEntrynot-accessiblecurrentInformation about a particular CIST Port.
1.3.6.1.4.1.20301.2.7.18.2.3.4.2.1.1ColumncistInfoPortIndexread-onlycurrentThe port number of the port for which this entry contains spanning tree configuration.
1.3.6.1.4.1.20301.2.7.18.2.3.4.2.1.2ColumncistInfoPortPriorityread-onlycurrentThe four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
1.3.6.1.4.1.20301.2.7.18.2.3.4.2.1.3ColumncistInfoPortPathCostread-onlycurrentThe contribution of this port to the path cost of paths towards the CIST Root which include this port.
1.3.6.1.4.1.20301.2.7.18.2.3.4.2.1.4ColumncistInfoPortStateread-onlycurrentCurrent state of the Port as defined by the Common spanning tree protocol.
1.3.6.1.4.1.20301.2.7.18.2.3.4.2.1.5ColumncistInfoPortRoleread-onlycurrentSelected Port Role of the port for this spanning tree instance.
1.3.6.1.4.1.20301.2.7.18.2.3.4.2.1.6ColumncistInfoPortDesignatedBridgeread-onlycurrentThe unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
1.3.6.1.4.1.20301.2.7.18.2.3.4.2.1.7ColumncistInfoPortDesignatedPortread-onlycurrentThe Port identifier of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.20301.2.7.18.2.3.4.2.1.8ColumncistInfoPortLinkTyperead-onlycurrentThe point-to-point status of the LAN segment attached to this port. A value of p2p (1) indicates that this port is being treated as if it is connected to a poi…
1.3.6.1.4.1.20301.2.7.18.2.3.4.2.1.9ColumncistInfoPortHelloTimeread-onlycurrentCIST port Hello Time
1.3.6.1.4.1.20301.2.7.18.2.3.4.2.1.10ColumncistInfoPortEdgeread-onlycurrentThe port is an edge port or not. Returns disabled(2) when the port is not an edge port and returns enabled(1) when it is an edge port.
1.3.6.1.4.1.20301.2.7.18.2.3.4.2.1.11ColumncistRootInfoPortAliasread-onlycurrentThe port alias of the port for which this entry contains spanning tree configuration.
1.3.6.1.4.1.20301.2.7.18.2.3.5NodevlanInfo
1.3.6.1.4.1.20301.2.7.18.2.3.5.1TablevlanInfoTablenot-accessiblecurrentThe table of VLAN information.
1.3.6.1.4.1.20301.2.7.18.2.3.5.1.1RowvlanInfoTableEntrynot-accessiblecurrentInformation about a particular VLAN.
1.3.6.1.4.1.20301.2.7.18.2.3.5.1.1.1ColumnvlanInfoIdread-onlycurrentThe VLAN identifier.
1.3.6.1.4.1.20301.2.7.18.2.3.5.1.1.2ColumnvlanInfoNameread-onlycurrentThe VLAN name.
1.3.6.1.4.1.20301.2.7.18.2.3.5.1.1.3ColumnvlanInfoStatusread-onlycurrentEnable or disable, VLAN state information
1.3.6.1.4.1.20301.2.7.18.2.3.5.1.1.7ColumnvlanInfoPortsread-onlycurrentThe port list information in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ por…
1.3.6.1.4.1.20301.2.7.18.2.3.6Nodedot1xInfo
1.3.6.1.4.1.20301.2.7.18.2.3.6.1Tabledot1xInfoPortTablenot-accessiblecurrentThe table of 8021x configuration in the Current_config.
1.3.6.1.4.1.20301.2.7.18.2.3.6.1.1Rowdot1xInfoPortEntrynot-accessiblecurrentInformation about 8021x Port Config
1.3.6.1.4.1.20301.2.7.18.2.3.6.1.1.1Columndot1xInfoPortIndexread-onlycurrentThe 8021x Port number for which the table is related.
1.3.6.1.4.1.20301.2.7.18.2.3.6.1.1.2Columndot1xInfoPortAuthModeread-onlycurrentAuthentication mode
1.3.6.1.4.1.20301.2.7.18.2.3.6.1.1.3Columndot1xInfoPortAuthStatusread-onlycurrentAuthentication status
1.3.6.1.4.1.20301.2.7.18.2.3.6.1.1.5Columndot1xInfoPortAuthPAEStateread-onlycurrentAuthenticator PAE State
1.3.6.1.4.1.20301.2.7.18.2.3.6.1.1.6Columndot1xInfoPortBackAuthStateread-onlycurrentBackend authenticator PAE state
1.3.6.1.4.1.20301.2.7.18.2.3.6.1.1.7Columndot1xInfoPortAssignedVlanread-onlycurrentVlan assigned from radius server.Value of 0 indicates , no vlan assigned via Radius
1.3.6.1.4.1.20301.2.7.18.2.3.6.1.1.8Columndot1xInfoPortAliasread-onlycurrentThe 8021x Port alias for which the table is related.
1.3.6.1.4.1.20301.2.7.18.2.3.6.2Nodedot1xSystemInfo
1.3.6.1.4.1.20301.2.7.18.2.3.6.2.1Scalardot1xSystemCapabilityread-onlycurrentSystem capability
1.3.6.1.4.1.20301.2.7.18.2.3.6.2.2Scalardot1xSystemStatusread-onlycurrentSystem status
1.3.6.1.4.1.20301.2.7.18.2.3.6.2.3Scalardot1xSystemProtoVersionread-onlycurrentProtocol version
1.3.6.1.4.1.20301.2.7.18.2.3.7NodegenInfo
1.3.6.1.4.1.20301.2.7.18.2.3.9NodetrunkGroupInfo
1.3.6.1.4.1.20301.2.7.18.2.3.9.1TabletrunkGroupInfoTablenot-accessiblecurrentThe table of trunk group information.
1.3.6.1.4.1.20301.2.7.18.2.3.9.1.1RowtrunkGroupInfoTableEntrynot-accessiblecurrentA row in trunk group information table.
1.3.6.1.4.1.20301.2.7.18.2.3.9.1.1.1ColumntrunkGroupInfoIndexread-onlycurrentThe identifier of the trunk group.
1.3.6.1.4.1.20301.2.7.18.2.3.9.1.1.2ColumntrunkGroupInfoStateread-onlycurrentTrunk group state.
1.3.6.1.4.1.20301.2.7.18.2.3.9.1.1.3ColumntrunkGroupInfoPortsread-onlycurrentThe port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 |…
1.3.6.1.4.1.20301.2.7.18.2.3.9.1.1.4ColumntrunkGroupInfoProtocolread-onlycurrentTrunk group protocol Static - static trunk group Lacp - dynamic trunk group
1.3.6.1.4.1.20301.2.7.18.2.3.9.2TabletrunkGroupInfoPortTablenot-accessiblecurrentThe table of Trunk Group Info.
1.3.6.1.4.1.20301.2.7.18.2.3.9.2.1RowtrunkGroupInfoPortTableEntrynot-accessiblecurrentA row in the Trunk Info table.
1.3.6.1.4.1.20301.2.7.18.2.3.9.2.1.1ColumntrunkGroupInfoPortTrunkIdread-onlycurrentThe Trunk identifier.
1.3.6.1.4.1.20301.2.7.18.2.3.9.2.1.2ColumntrunkGroupInfoPortPortIdread-onlycurrentThe Port identifier.
1.3.6.1.4.1.20301.2.7.18.2.3.9.2.1.3ColumntrunkGroupInfoPortStatusread-onlycurrentThe Port Status.
1.3.6.1.4.1.20301.2.7.18.2.3.9.2.1.4ColumntrunkGroupInfoPortAliasread-onlycurrentThe Port alaias.
1.3.6.1.4.1.20301.2.7.18.2.3.10NodehotlinksInfo
1.3.6.1.4.1.20301.2.7.18.2.3.10.1ScalarhotlinksInfoOnStateread-onlycurrentHot Links ON/OFF setting info.
1.3.6.1.4.1.20301.2.7.18.2.3.10.2ScalarhotlinksInfoFdbUpdateStateread-onlycurrentEnable/disable Hot Links FDB Update setting info.
1.3.6.1.4.1.20301.2.7.18.2.3.10.3TablehotlinksInfoTriggerTablenot-accessiblecurrentThe Hot Links Trigger Table Info.
1.3.6.1.4.1.20301.2.7.18.2.3.10.3.1RowhotlinksInfoTriggerTableEntrynot-accessiblecurrentA row in the Hot Links Trigger Table Info.
1.3.6.1.4.1.20301.2.7.18.2.3.10.3.1.1ColumnhotlinksInfoTriggerIdread-onlycurrentThe Trigger identifier.
1.3.6.1.4.1.20301.2.7.18.2.3.10.3.1.2ColumnhotlinksInfoTriggerNameread-onlycurrentA textual string containing the trigger name.
1.3.6.1.4.1.20301.2.7.18.2.3.10.3.1.3ColumnhotlinksInfoTriggerStateread-onlycurrentEnable/disable Trigger state info.
1.3.6.1.4.1.20301.2.7.18.2.3.10.3.1.4ColumnhotlinksInfoTriggerPreemptStateread-onlycurrentEnable/disable Preemption state info.
1.3.6.1.4.1.20301.2.7.18.2.3.10.3.1.5ColumnhotlinksInfoTriggerFdelayread-onlycurrentForward Delay setting info (in secs).
1.3.6.1.4.1.20301.2.7.18.2.3.10.3.1.6ColumnhotlinksInfoTriggerActiveread-onlycurrentA textual string containing the active interface info.
1.3.6.1.4.1.20301.2.7.18.2.3.10.4ScalarhotlinksInfoBpduStateread-onlycurrentEnable/disable Hot Links BPDU flood setting info.
1.3.6.1.4.1.20301.2.7.18.2.3.10.5ScalarhotlinksInfoFdbUpdateRateread-onlycurrentHot Links FDB update rate (packets per second).
1.3.6.1.4.1.20301.2.7.18.2.3.11NodelldpInfo
1.3.6.1.4.1.20301.2.7.18.2.3.11.1TablelldpInfoPortTablenot-accessiblecurrentThe table of LLDP Port Info.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1RowlldpInfoPortEntrynot-accessiblecurrentLLDP Port Info.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.1ColumnlldpInfoPortIndexread-onlycurrentThe index of the row in LLDP info port table.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.2ColumnlldpInfoPortAliasread-onlycurrentThe port alias of the port in LLDP info port table.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.3ColumnlldpInfoPortMacAddressread-onlycurrentThe mac address of the port in LLDP info port table.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.4ColumnlldpInfoPortMturead-onlycurrentThe MTU size of the port in LLDP info port table.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.5ColumnlldpInfoPortEnabledread-onlycurrentThe PortEnabled field of the port in LLDP info port table.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.6ColumnlldpInfoPortAdminStatusread-onlycurrentThe Admin Status of the port in LLDP info port table.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.7ColumnlldpInfoPortRxChangesread-onlycurrentThe rxChanges field of the port in LLDP info port table.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.8ColumnlldpInfoPortportdesctlvread-onlycurrentThis is the Port Description TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.9ColumnlldpInfoPortsysnametlvread-onlycurrentThis is the System Name TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.10ColumnlldpInfoPortsysdescrtlvread-onlycurrentThis is the System Description TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.11ColumnlldpInfoPortsyscaptlvread-onlycurrentThis is the System Capabilities TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.12ColumnlldpInfoPortmgmtaddrtlvread-onlycurrentThis is the Management Address TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.13ColumnlldpInfoPortportvidtlvread-onlycurrentThis is the Port VLAN ID TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.14ColumnlldpInfoPortportprottlvread-onlycurrentThis is the Port and Protocol VLAN ID TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.15ColumnlldpInfoPortvlannametlvread-onlycurrentThis is the VLAN Name TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.16ColumnlldpInfoPortprotidtlvread-onlycurrentThis is the Protocol Identity TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.17ColumnlldpInfoPortmacphytlvread-onlycurrentThis is the MAC/PHY Configuration/Status TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.18ColumnlldpInfoPortpowermditlvread-onlycurrentThis is the Power Via MDI TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.19ColumnlldpInfoPortlinkaggrtlvread-onlycurrentThis is the Link Aggregation TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.3.11.1.1.20ColumnlldpInfoPortframesztlvread-onlycurrentThis is the Maximum Frame Size TLV state of the LLDP port.
1.3.6.1.4.1.20301.2.7.18.2.3.11.2TablelldpInfoTxTablenot-accessiblecurrentThe table of LLDP Transmit State Machine Info.
1.3.6.1.4.1.20301.2.7.18.2.3.11.2.1RowlldpInfoTxEntrynot-accessiblecurrentLLDP Transmit State Machine Info.
1.3.6.1.4.1.20301.2.7.18.2.3.11.2.1.1ColumnlldpInfoTxIndexread-onlycurrentThe index of the row in LLDP Transmit State Machine info table.
1.3.6.1.4.1.20301.2.7.18.2.3.11.2.1.2ColumnlldpInfoTxStateread-onlycurrentThe transmit state of the port in LLDP Transmit State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.2.1.3ColumnlldpInfoTxLocalChangedread-onlycurrentThe somethingChangedLocal field of the port in LLDP Transmit State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.2.1.4ColumnlldpInfoTxTTLread-onlycurrentThe txTTL timer of the port in LLDP Transmit State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.2.1.5ColumnlldpInfoTxTxTTRread-onlycurrentThe txTTR timer of the port in LLDP Transmit State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.2.1.6ColumnlldpInfoTxDelayWhileread-onlycurrentThe txDelayWhile timer of the port in LLDP Transmit State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.2.1.7ColumnlldpInfoTxShutdownWhileread-onlycurrentThe txShutdownWhile timer of the port in LLDP Transmit State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.2.1.8ColumnlldpInfoTxReinitDelayread-onlycurrentThe reinitDelay timer of the port in LLDP Transmit State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.2.1.9ColumnlldpInfoTxHoldMultiplierread-onlycurrentThe msgTxHold timer of the port in LLDP Transmit State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.2.1.10ColumnlldpInfoTxTransmitIntervalread-onlycurrentThe msgTxInterval timer of the port in LLDP Transmit State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.2.1.11ColumnlldpInfoTxTransmitDelayread-onlycurrentThe txDelay timer of the port in LLDP Transmit State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.2.1.12ColumnlldpInfoTxDMACread-onlycurrentThe Destination MAC address of the LLDP remote devices. Legend(possible values in DMAC column) : NB - Nearest Bridge - 01-80-C2-00-00-0E NnTB - Nearest non-TPM…
1.3.6.1.4.1.20301.2.7.18.2.3.11.2.1.13ColumnlldpInfoTxPortAliasread-onlycurrentThe alias of the row in LLDP Transmit State Machine info table.
1.3.6.1.4.1.20301.2.7.18.2.3.11.3TablelldpInfoRxTablenot-accessiblecurrentThe table of LLDP Receive State Machine Info.
1.3.6.1.4.1.20301.2.7.18.2.3.11.3.1RowlldpInfoRxEntrynot-accessiblecurrentLLDP Receive State Machine Info.
1.3.6.1.4.1.20301.2.7.18.2.3.11.3.1.1ColumnlldpInfoRxIndexread-onlycurrentThe index of the row in LLDP Receive State Machine info table.
1.3.6.1.4.1.20301.2.7.18.2.3.11.3.1.2ColumnlldpInfoRxStateread-onlycurrentThe receive state of the port in LLDP Receive State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.3.1.3ColumnlldpInfoRxBadFrameread-onlycurrentThe badFrame field of the port in LLDP Receive State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.3.1.4ColumnlldpInfoRxRcvFrameread-onlycurrentThe rcvFrame field of the port in LLDP Receive State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.3.1.5ColumnlldpInfoRxRxInfoAgeread-onlycurrentThe rxInfoAge field of the port in LLDP Receive State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.3.1.6ColumnlldpInfoRxRemoteChangedread-onlycurrentThe somethingChangedRemote field of the port in LLDP Receive State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.3.1.7ColumnlldpInfoRxTooManyNeighborsread-onlycurrentThe tooManyNeighbors field of the port in LLDP Receive State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.3.1.8ColumnlldpInfoRxSNMPNotifyread-onlycurrentThe tooManyNeighbors field of the port in LLDP Receive State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.3.1.9ColumnlldpInfoRxRxTTLread-onlycurrentThe rxTTL timer of the port in LLDP Receive State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.3.1.10ColumnlldpInfoRxTooManyNeighborTimerread-onlycurrentThe tooManyNeighborsTimer timer of the port in LLDP Receive State Machine.
1.3.6.1.4.1.20301.2.7.18.2.3.11.3.1.11ColumnlldpInfoRxDMACread-onlycurrentThe Destination MAC address of the LLDP remote devices. Legend(possible values in DMAC column) : NB - Nearest Bridge - 01-80-C2-00-00-0E NnTB - Nearest non-TPM…
1.3.6.1.4.1.20301.2.7.18.2.3.11.3.1.12ColumnlldpInfoRxPortAliasread-onlycurrentThe alias of the row in LLDP Receive State Machine info table.
1.3.6.1.4.1.20301.2.7.18.2.3.11.4TablelldpInfoRemoteDevicesTablenot-accessiblecurrentThe table of LLDP remote devices Info.
1.3.6.1.4.1.20301.2.7.18.2.3.11.4.1RowlldpInfoRemoteDevicesEntrynot-accessiblecurrentLLDP remote devices Info.
1.3.6.1.4.1.20301.2.7.18.2.3.11.4.1.1ColumnlldpInfoRemoteDevicesIndexread-onlycurrentThe index of the row in LLDP remote devices info table.
1.3.6.1.4.1.20301.2.7.18.2.3.11.4.1.3ColumnlldpInfoRemoteDevicesRemoteTTLread-onlycurrentThe remote TTL of the LLDP remote devices entry.
1.3.6.1.4.1.20301.2.7.18.2.3.11.4.1.4ColumnlldpInfoRemoteDevicesRxChangesread-onlycurrentThe rxChanges field of the LLDP remote devices entry.
1.3.6.1.4.1.20301.2.7.18.2.3.11.4.1.5ColumnlldpInfoRemoteDevicesLocalPortread-onlycurrentThe local port alias of the LLDP remote devices entry.
1.3.6.1.4.1.20301.2.7.18.2.3.11.4.1.6ColumnlldpInfoRemoteDevicesChassisSubtyperead-onlycurrentThe chassis ID subtype of the LLDP remote devices entry.
1.3.6.1.4.1.20301.2.7.18.2.3.11.4.1.7ColumnlldpInfoRemoteDevicesChassisIdread-onlycurrentThe chassis ID of the LLDP remote devices entry.
1.3.6.1.4.1.20301.2.7.18.2.3.11.4.1.8ColumnlldpInfoRemoteDevicesPortSubtyperead-onlycurrentThe port ID subtype of the LLDP remote devices entry.
1.3.6.1.4.1.20301.2.7.18.2.3.11.4.1.9ColumnlldpInfoRemoteDevicesPortIdread-onlycurrentThe port ID of the LLDP remote devices entry.
1.3.6.1.4.1.20301.2.7.18.2.3.11.4.1.10ColumnlldpInfoRemoteDevicesSystemNameread-onlycurrentThe system name of the LLDP remote devices entry.
1.3.6.1.4.1.20301.2.7.18.2.3.11.4.1.11ColumnlldpInfoRemoteDevicesSystemDescriptionread-onlycurrentThe system description of the LLDP remote devices entry.
1.3.6.1.4.1.20301.2.7.18.2.3.11.4.1.12ColumnlldpInfoRemoteDevicesPortDescriptionread-onlycurrentThe port description of the LLDP remote devices entry.
1.3.6.1.4.1.20301.2.7.18.2.3.11.4.1.13ColumnlldpInfoRemoteDevicesSystemCapSupportedread-onlycurrentThe supported system capabilities of the LLDP remote devices entry.
1.3.6.1.4.1.20301.2.7.18.2.3.11.4.1.14ColumnlldpInfoRemoteDevicesSystemCapEnabledread-onlycurrentThe enabled system capabilities of the LLDP remote devices entry.
1.3.6.1.4.1.20301.2.7.18.2.3.11.4.1.15ColumnlldpInfoRemoteDMACread-onlycurrentThe Destination MAC address of the LLDP remote devices. Legend(possible values in DMAC column) : NB - Nearest Bridge - 01-80-C2-00-00-0E NnTB - Nearest non-TPM…
1.3.6.1.4.1.20301.2.7.18.2.3.11.5TablelldpInfoRemoteDevicesManAddrTablenot-accessiblecurrentThe table of LLDP remote devices management address Info.
1.3.6.1.4.1.20301.2.7.18.2.3.11.5.1RowlldpInfoRemoteDevicesManAddrEntrynot-accessiblecurrentLLDP remote devices management address Info.
1.3.6.1.4.1.20301.2.7.18.2.3.11.5.1.1ColumnlldpInfoRemoteDevicesManAddrSubtyperead-onlycurrentThe management address subtype of the LLDP remote devices entry.
1.3.6.1.4.1.20301.2.7.18.2.3.11.5.1.2ColumnlldpInfoRemoteDevicesManAddrread-onlycurrentThe management address of the LLDP remote devices entry.
1.3.6.1.4.1.20301.2.7.18.2.3.11.5.1.3ColumnlldpInfoRemoteDevicesManAddrIfSubtyperead-onlycurrentThe interface numbering subtype of the LLDP remote devices management address entry.
1.3.6.1.4.1.20301.2.7.18.2.3.11.5.1.4ColumnlldpInfoRemoteDevicesManAddrIfIdread-onlycurrentThe interface number of the LLDP remote devices management address entry.
1.3.6.1.4.1.20301.2.7.18.2.3.11.5.1.5ColumnlldpInfoRemoteDevicesManAddrOIDread-onlycurrentThe object identifier of the LLDP remote devices management address entry.
1.3.6.1.4.1.20301.2.7.18.2.3.11.6ScalarlldpClearMsapread-writecurrentClear LLDP remote devices information when setting clearMsap(1). When read, ok(0) is always returned.
1.3.6.1.4.1.20301.2.7.18.2.3.13NodeudldInfo
1.3.6.1.4.1.20301.2.7.18.2.3.13.1TableudldInfoPortTablenot-accessiblecurrentThe table of UDLD port info.
1.3.6.1.4.1.20301.2.7.18.2.3.13.1.1RowudldInfoPortEntrynot-accessiblecurrentA row inside UDLD port info table.
1.3.6.1.4.1.20301.2.7.18.2.3.13.1.1.1ColumnudldInfoPortIndexread-onlycurrentThe index of the row in UDLD port configuration table.
1.3.6.1.4.1.20301.2.7.18.2.3.13.1.1.2ColumnudldInfoPortConfigread-onlycurrentThe Config field of the port in UDLD port info table. Shows the administative state of the current port.
1.3.6.1.4.1.20301.2.7.18.2.3.13.1.1.3ColumnudldInfoPortModeread-onlycurrentThe Mode field of the port in UDLD info port table. Shows the udld administrative mode for the current port.
1.3.6.1.4.1.20301.2.7.18.2.3.13.1.1.4ColumnudldInfoPortLinkread-onlycurrentThe Link field of the port in UDLD info port table. Shows the state of the link associated with the port.
1.3.6.1.4.1.20301.2.7.18.2.3.13.1.1.5ColumnudldInfoPortOperationalStatusread-onlycurrentThe OperationalStatus field of the port in UDLD info port table. Contains the udld operational state for the current port.
1.3.6.1.4.1.20301.2.7.18.2.3.13.1.1.6ColumnudldInfoPortBidirectionalStatusread-onlycurrentThe BidirectionalStatus field of the port in UDLD info port table. Contains the udld bidirectional state for the current port.
1.3.6.1.4.1.20301.2.7.18.2.3.13.1.1.7ColumnudldInfoPortIntervalread-onlycurrentThe Interval field of the port in UDLD info port table. The duration, measured in seconds, of the interval during which UDLD probes are sent, after the linkup …
1.3.6.1.4.1.20301.2.7.18.2.3.13.1.1.8ColumnudldInfoPortTimeoutread-onlycurrentThe Timeout field of the port in UDLD info port table. Length of the detection phase, measured in seconds.
1.3.6.1.4.1.20301.2.7.18.2.3.13.1.1.9ColumnudldInfoPortNeighborCountread-onlycurrentThe Neighbor field of the port in UDLD info port table. Contains the number of udld neighbors for the current port.
1.3.6.1.4.1.20301.2.7.18.2.3.13.1.1.10ColumnudldInfoPortAliasread-onlycurrentThe alias of the row in UDLD port configuration table.
1.3.6.1.4.1.20301.2.7.18.2.3.13.2TableudldInfoNeighborTablenot-accessiblecurrentThe table of UDLD port neighbor info.
1.3.6.1.4.1.20301.2.7.18.2.3.13.2.1RowudldInfoNeighborEntrynot-accessiblecurrentA row inside UDLD port info table.
1.3.6.1.4.1.20301.2.7.18.2.3.13.2.1.1ColumnudldInfoNeighborLocalPortIndexread-onlycurrentThe index of the port for which neighbor information will be returned.
1.3.6.1.4.1.20301.2.7.18.2.3.13.2.1.2ColumnudldInfoNeighborIndexread-onlycurrentThe index of the target neighbor among the port neighbors.
1.3.6.1.4.1.20301.2.7.18.2.3.13.2.1.3ColumnudldInfoNeighborExpirationread-onlycurrentHold time for the given neighbor.
1.3.6.1.4.1.20301.2.7.18.2.3.13.2.1.4ColumnudldInfoNeighborDeviceNameread-onlycurrentDevice name reported by neigbor.
1.3.6.1.4.1.20301.2.7.18.2.3.13.2.1.5ColumnudldInfoNeighborDeviceIDread-onlycurrentDevice ID reported by neigbor.
1.3.6.1.4.1.20301.2.7.18.2.3.13.2.1.6ColumnudldInfoNeighborPortIDread-onlycurrentPort ID reported by neigbor.
1.3.6.1.4.1.20301.2.7.18.2.3.13.2.1.7ColumnudldInfoNeighborLocalPortAliasread-onlycurrentThe alias of the port for which neighbor information will be returned.
1.3.6.1.4.1.20301.2.7.18.2.3.14NodefailoverInfo
1.3.6.1.4.1.20301.2.7.18.2.3.14.1ScalarfailoverInfoStateread-onlycurrentCurrent state of failover
1.3.6.1.4.1.20301.2.7.18.2.3.14.3TablefailoverInfoTriggerTablenot-accessiblecurrentThis table holds the information for individual triggers
1.3.6.1.4.1.20301.2.7.18.2.3.14.3.1RowfailoverInfoTriggerEntrynot-accessiblecurrentA row in the failover trigger table.
1.3.6.1.4.1.20301.2.7.18.2.3.14.3.1.1ColumnfailoverInfoTriggerIdread-onlycurrentThe trigger identifier.
1.3.6.1.4.1.20301.2.7.18.2.3.14.3.1.2ColumnfailoverInfoTriggerStateread-onlycurrentThe trigger state.
1.3.6.1.4.1.20301.2.7.18.2.3.14.3.1.3ColumnfailoverInfoTriggerLimitread-onlycurrentLimit number of operational links
1.3.6.1.4.1.20301.2.7.18.2.3.14.3.1.4ColumnfailoverInfoTriggerMonitorStateread-onlycurrentThe runtime monitor state
1.3.6.1.4.1.20301.2.7.18.2.3.14.3.1.5ColumnfailoverInfoTriggerMonitorPortsread-onlycurrentThe list of ports that are monitored. The ports are represented in bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ por…
1.3.6.1.4.1.20301.2.7.18.2.3.14.3.1.6ColumnfailoverInfoTriggerControlStateread-onlycurrentThe runtime control state
1.3.6.1.4.1.20301.2.7.18.2.3.14.3.1.7ColumnfailoverInfoTriggerControlPortsread-onlycurrentThe list of ports that are controlled. The ports are represented in bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ po…
1.3.6.1.4.1.20301.2.7.18.2.3.14.4TablefailoverInfoMonPortStateTablenot-accessiblecurrentThis table holds the information for individual triggers
1.3.6.1.4.1.20301.2.7.18.2.3.14.4.1RowfailoverInfoTriggerMonPortEntrynot-accessiblecurrentA row in the failover trigger table.
1.3.6.1.4.1.20301.2.7.18.2.3.14.4.1.1ColumnfailoverInfoTriggerMonIdread-onlycurrentThe trigger identifier.
1.3.6.1.4.1.20301.2.7.18.2.3.14.4.1.2ColumnfailoverInfoTriggerMonPortIdread-onlycurrentThe Port identifier.
1.3.6.1.4.1.20301.2.7.18.2.3.14.4.1.3ColumnfailoverInfoTriggerMonPortStatusread-onlycurrentThe Port Status.
1.3.6.1.4.1.20301.2.7.18.2.3.14.4.1.4ColumnfailoverInfoTriggerMonPortAliasread-onlycurrentThe Port alias.
1.3.6.1.4.1.20301.2.7.18.2.3.14.5TablefailoverInfoCtlPortStateTablenot-accessiblecurrentThis table holds the information for individual triggers
1.3.6.1.4.1.20301.2.7.18.2.3.14.5.1RowfailoverInfoTriggerCtlPortEntrynot-accessiblecurrentA row in the failover trigger table.
1.3.6.1.4.1.20301.2.7.18.2.3.14.5.1.1ColumnfailoverInfoTriggerCtlIdread-onlycurrentThe trigger identifier.
1.3.6.1.4.1.20301.2.7.18.2.3.14.5.1.2ColumnfailoverInfoTriggerCtlPortIdread-onlycurrentThe Port identifier.
1.3.6.1.4.1.20301.2.7.18.2.3.14.5.1.3ColumnfailoverInfoTriggerCtlPortStatusread-onlycurrentThe Port Status.
1.3.6.1.4.1.20301.2.7.18.2.3.14.5.1.4ColumnfailoverInfoTriggerCtlPortAliasread-onlycurrentThe Port alias.
1.3.6.1.4.1.20301.2.7.18.2.3.16NodevlagInfo
1.3.6.1.4.1.20301.2.7.18.2.3.16.1NodevlagInfoSystem
1.3.6.1.4.1.20301.2.7.18.2.3.16.1.1ScalarvlagInfoStateread-onlycurrentThe current running state of vLAG.
1.3.6.1.4.1.20301.2.7.18.2.3.16.1.2ScalarvlagInfoAdminRoleread-onlycurrentThe current running role of the switch. Role can be Primary(1), secondary(2) and unelected(3). Primary role indicates that the this switch controls the central…
1.3.6.1.4.1.20301.2.7.18.2.3.16.1.3ScalarvlagInfoISLIdread-onlycurrentvLAG ISL trunk id.
1.3.6.1.4.1.20301.2.7.18.2.3.16.1.4ScalarvlagInfoLocalMacread-onlycurrentLocal vLAG MAC address.
1.3.6.1.4.1.20301.2.7.18.2.3.16.1.5ScalarvlagInfoLocalPriorityread-onlycurrentLocal vLAG Priority.
1.3.6.1.4.1.20301.2.7.18.2.3.16.1.6ScalarvlagInfoRemoteMacread-onlycurrentRemote vLAG MAC address.
1.3.6.1.4.1.20301.2.7.18.2.3.16.1.7ScalarvlagInfoRemotePriorityread-onlycurrentRemote vLAG Priority.
1.3.6.1.4.1.20301.2.7.18.2.3.16.1.8ScalarvlagInfoHlthchkStatusread-onlycurrentThe current health check running status.
1.3.6.1.4.1.20301.2.7.18.2.3.16.1.9ScalarvlagInfoStartupDelayIntervalread-onlycurrentStartup Delay Timer Interval. The value may be different from vlagCurCfgStartupDelayInterval for the configuration of the interval after the timer is started c…
1.3.6.1.4.1.20301.2.7.18.2.3.16.1.10ScalarvlagInfoStartupDelayStatusread-onlycurrentStartup Delay Timer Status.
1.3.6.1.4.1.20301.2.7.18.2.3.16.1.11ScalarvlagInfoSystemMacread-onlycurrentSystem vLAG MAC address
1.3.6.1.4.1.20301.2.7.18.2.3.16.1.12ScalarvlagInfoOperaRoleread-onlycurrentvLAG switch operational role.
1.3.6.1.4.1.20301.2.7.18.2.3.16.1.13ScalarvlagInfoAutoRecoveryIntervalread-onlycurrentAuto Recovery Timer Interval. The value may be different from vlagCurCfgAutoRecoveryInterval for the configuration of the interval after the timer is started c…
1.3.6.1.4.1.20301.2.7.18.2.3.16.1.14ScalarvlagInfoAutoRecoveryStatusread-onlycurrentAuto Recovery Timer Status.
1.3.6.1.4.1.20301.2.7.18.2.3.16.2NodevlagInfoGroup
1.3.6.1.4.1.20301.2.7.18.2.3.16.2.1TablevlagInfoInstanceTablenot-accessiblecurrentA table of objects of the running vLAG instances.
1.3.6.1.4.1.20301.2.7.18.2.3.16.2.1.1RowvlagInfoInstanceEntrynot-accessiblecurrentThe configuration objects for an vLAG group.
1.3.6.1.4.1.20301.2.7.18.2.3.16.2.1.1.1ColumnvlagInstanceIdread-onlycurrentThe identifier of this instance.
1.3.6.1.4.1.20301.2.7.18.2.3.16.2.1.1.2ColumnvlagInstanceTrunkIdread-onlycurrentThe trunk id of this vLAG instance.
1.3.6.1.4.1.20301.2.7.18.2.3.16.2.1.1.3ColumnvlagInstanceAdminKeyread-onlycurrentAdminKey of this vLAG instance. Applicable only incase of dynamic trunks.
1.3.6.1.4.1.20301.2.7.18.2.3.16.2.1.1.4ColumnvlagInstanceStateread-onlycurrentThe current running state of the vLAG instance.
1.3.6.1.4.1.20301.2.7.18.2.3.16.2.2NodevlagInfoIslGroup
1.3.6.1.4.1.20301.2.7.18.2.3.16.2.2.1ScalarvlagInfoIslIdread-onlycurrentvLAG ISL Id
1.3.6.1.4.1.20301.2.7.18.2.3.16.2.2.3ScalarvlagInfoIslProtocolread-onlycurrentvLAG ISL trunk group state Static - static trunk group Lacp - dynamic trunk group
1.3.6.1.4.1.20301.2.7.18.2.3.16.2.2.4ScalarvlagInfoIslPortchannelread-onlycurrentvLAG ISL portchannel number
1.3.6.1.4.1.20301.2.7.18.2.3.16.2.2.5ScalarvlagInfoIslAdminkeyread-onlycurrentvLAG ISL lacp admin key
1.3.6.1.4.1.20301.2.7.18.2.3.16.2.2.6ScalarvlagInfoIslPortsread-onlycurrentThe port list that forms the ISL. The ports are presented in bitmap format. OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7…
1.3.6.1.4.1.20301.2.7.18.2.3.16.2.2.7ScalarvlagInfoIslPortStateread-onlycurrentThe ISL member ports' protocol state. The ports' protocol state are presented in bitmap format. OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 |…
1.3.6.1.4.1.20301.2.7.18.2.3.16.2.2.8ScalarvlagInfoIslPortLinkStateread-onlycurrentThe ISL member ports' link state. The ports' link state are presented in bitmap format. OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || …
1.3.6.1.4.1.20301.2.7.18.2.3.18NodeslpInfo
1.3.6.1.4.1.20301.2.7.18.2.3.18.1NodeslpInfoSystem
1.3.6.1.4.1.20301.2.7.18.2.3.18.1.1ScalarslpInfoProtocolVersionread-onlycurrentSLP protocol version.
1.3.6.1.4.1.20301.2.7.18.2.3.18.1.2ScalarslpInfoListeningPortread-onlycurrentSLP listening port.
1.3.6.1.4.1.20301.2.7.18.2.3.18.1.3TableslpInfoListeningIPInterfaceTablenot-accessiblecurrentA table with all the SLP listening IP interfaces.
1.3.6.1.4.1.20301.2.7.18.2.3.18.1.3.1RowslpInfoListeningIPInterfaceEntrynot-accessiblecurrentThe configuration objects for a SLP listening IP interface.
1.3.6.1.4.1.20301.2.7.18.2.3.18.1.3.1.1ColumnlisteningIPInterfaceIdread-onlycurrentThe identifier of this IP interface.
1.3.6.1.4.1.20301.2.7.18.2.3.18.1.3.1.2ColumnlisteningIPInterfaceAddressread-onlycurrentThe adddress of this IP interface.
1.3.6.1.4.1.20301.2.7.18.2.3.18.2NodeslpInfoDirectoryAgents
1.3.6.1.4.1.20301.2.7.18.2.3.18.2.1TableslpInfoDirectoryAgentsTablenot-accessiblecurrentA table with all the SLP Directory Agents.
1.3.6.1.4.1.20301.2.7.18.2.3.18.2.1.1RowslpInfoDirectoryAgentEntrynot-accessiblecurrentThe configuration objects for a Directory Agent entry.
1.3.6.1.4.1.20301.2.7.18.2.3.18.2.1.1.1ColumndirectoryAgentAddressread-onlycurrentThe IP adddress of this Directory Agent.
1.3.6.1.4.1.20301.2.7.18.2.3.18.2.1.1.2ColumndirectoryAgentPortread-onlycurrentThe port of this Directory Agent. Communication can be done using TCP or UDP.
1.3.6.1.4.1.20301.2.7.18.2.3.18.2.1.1.3ColumndirectoryAgentTimeread-onlycurrentThe time elapsed from the moment when this Directory Agent was learned measured in seconds.
1.3.6.1.4.1.20301.2.7.18.2.3.18.3NodeslpInfoUserAgents
1.3.6.1.4.1.20301.2.7.18.2.3.18.3.1TableslpInfoUserAgentsTablenot-accessiblecurrentA table with all the SLP User Agents.
1.3.6.1.4.1.20301.2.7.18.2.3.18.3.1.1RowslpInfoUserAgentEntrynot-accessiblecurrentThe configuration objects for a User Agent entry.
1.3.6.1.4.1.20301.2.7.18.2.3.18.3.1.1.1ColumnuserAgentAddressread-onlycurrentThe IP adddress of this User Agent.
1.3.6.1.4.1.20301.2.7.18.2.3.18.3.1.1.2ColumnuserAgentPortread-onlycurrentThe port of this User Agent. Communication can be done using TCP or UDP.
1.3.6.1.4.1.20301.2.7.18.2.3.18.3.1.1.3ColumnuserAgentTimeread-onlycurrentThe time elapsed from the moment when this User Agent was learned measured in seconds.
1.3.6.1.4.1.20301.2.7.18.2.3.18.4ScalarslpDirectoryAgentsClearread-writecurrentSetting this object to 'clear' will reset all directory agents settings of SLP. A get action of this object will always return 'other'. Setting this object to …
1.3.6.1.4.1.20301.2.7.18.2.4Nodelayer2Oper
1.3.6.1.4.1.20301.2.7.18.3Nodelayer3
1.3.6.1.4.1.20301.2.7.18.3.1Nodelayer3Configs
1.3.6.1.4.1.20301.2.7.18.3.1.1NodeipInterfaceCfg
1.3.6.1.4.1.20301.2.7.18.3.1.1.1ScalaripInterfaceTableMaxread-onlycurrentThe maximum number of rows in the IP interface table.
1.3.6.1.4.1.20301.2.7.18.3.1.1.2TableipCurCfgIntfTablenot-accessiblecurrentThe table of IP interface configuration.
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1RowipCurCfgIntfEntrynot-accessiblecurrentA row in the Ip interface table
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.1ColumnipCurCfgIntfIndexread-onlycurrentThe interface number for which the IP information is related.
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.2ColumnipCurCfgIntfAddrread-onlycurrentThis field configures the new IP/IPv6 addr of the interface. Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal colon notation. Valid IPv6 address…
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.3ColumnipCurCfgIntfMaskread-onlycurrentThe subnet mask as IPv4 dotted-quads OR the IPv6 prefix length (integer in range 0..128) associated with this IP address .
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.4ColumnipCurCfgIntfBroadcastread-onlyobsoleteThe broadcast address of the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.5ColumnipCurCfgIntfVlanread-onlycurrentThe VLAN associated with the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.6ColumnipCurCfgIntfStateread-onlycurrentThe state of the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.7ColumnipCurCfgIntfBootpRelayread-onlycurrentEnable/disable BOOTP relay.
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.12ColumnipCurCfgIntfRouteAdvread-onlycurrentEnable/disable route advertisement of the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.13ColumnipCurCfgIntfManagedCfgread-onlycurrentEnable/disable Managed config flag of the interface, which allows the host to use DHCP for address configuration.
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.14ColumnipCurCfgIntfOtherCfgread-onlycurrentEnable/disable Other config flag of the interface, which allows the host to use DHCP for other stateful configuration.
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.15ColumnipCurCfgIntfAdvLifetimeread-onlycurrentSet Router Advertisement lifetime of the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.16ColumnipCurCfgIntfDadAttemptsread-onlycurrentSet the number of duplicate address detection (dad) attempts of the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.17ColumnipCurCfgIntfReachTimeread-onlycurrentSet the advertised reachability time of the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.18ColumnipCurCfgIntfAdvIntervalread-onlycurrentSet the IPv6 Router Advertisement interval of the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.19ColumnipCurCfgIntfAdvIntervalMinread-onlycurrentSet the IPv6 Router Advertisement Minimum interval limit of the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.20ColumnipCurCfgIntfRetransmitTimerread-onlycurrentSet the IPv6 Router Advertisement Retransmit Timer
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.21ColumnipCurCfgIntfHopLimitread-onlycurrentSet the IPv6 Router Advertisement Current Hop Limit
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.23ColumnipCurCfgIntfIp6Hostread-onlycurrentEnable/disable IPv6 host mode on the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.25ColumnipCurCfgSecIntfAddrread-onlycurrentThis field configures the new IP/IPv6 addr of the interface. Address should be in IPv6 4-byte haxadecimal colon notation. Valid IPv6 address should be in any o…
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.26ColumnipCurCfgSecIntfPrefixread-onlycurrentThe IPv6 prefix length (integer in range 0..128) associated with this IP address .
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.27ColumnipCurCfgIntfAnycastread-onlycurrentThis field has the value of anycast(1) if IPv6 interface address is anycast and none(2) if not.
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.28ColumnipCurCfgSecIntfAnycastread-onlycurrentThis field has the value of anycast(1) if secondary IPv6 interface address is anycast and none(2) if not.
1.3.6.1.4.1.20301.2.7.18.3.1.1.2.1.29ColumnipCurCfgIntfIp6Dstunread-onlycurrentEnable/disable sending of ICMP Unreachable messages.
1.3.6.1.4.1.20301.2.7.18.3.1.1.3TableipNewCfgIntfTablenot-accessiblecurrentThe table of interface in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1RowipNewCfgIntfEntrynot-accessiblecurrentA row in the Ip interface table
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.1ColumnipNewCfgIntfIndexread-onlycurrentThe interface number for which the IP information is related.
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.2ColumnipNewCfgIntfAddrread-createcurrentThis field configures the new IP/IPv6 addr of the interface. Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal colon notation. Valid IPv6 address…
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.3ColumnipNewCfgIntfMaskread-createcurrentThe subnet mask as IPv4 dotted-quads OR the IPv6 prefix length (integer in range 0..128) associated with this IP address .
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.5ColumnipNewCfgIntfVlanread-createcurrentThe VLAN associated with the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.6ColumnipNewCfgIntfStateread-createcurrentThe state of the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.7ColumnipNewCfgIntfDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.8ColumnipNewCfgIntfBootpRelayread-createcurrentEnable/disable BOOTP relay.
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.13ColumnipNewCfgIntfRouteAdvread-createcurrentEnable/disable route advertisement of the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.14ColumnipNewCfgIntfManagedCfgread-createcurrentEnable/disable Managed config flag of the interface, which allows the host to use DHCP for address configuration.
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.15ColumnipNewCfgIntfOtherCfgread-createcurrentEnable/disable Other config flag of the interface, which allows the host to use DHCP for other stateful configuration.
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.16ColumnipNewCfgIntfAdvLifetimeread-createcurrentSet Router Advertisement lifetime of the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.17ColumnipNewCfgIntfDadAttemptsread-createcurrentSet the number of duplicate address detection (dad) attempts of the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.18ColumnipNewCfgIntfReachTimeread-createcurrentSet the advertised reachability time of the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.19ColumnipNewCfgIntfAdvIntervalread-createcurrentSet the IPv6 Router Advertisement interval of the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.20ColumnipNewCfgIntfAdvIntervalMinread-createcurrentSet the IPv6 Router Advertisement Minimum interval limit of the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.21ColumnipNewCfgIntfRetransmitTimerread-createcurrentSet the IPv6 Router Advertisement Retransmit Timer
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.22ColumnipNewCfgIntfHopLimitread-createcurrentSet the IPv6 Router Advertisement Current Hop Limit
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.24ColumnipNewCfgIntfIp6Hostread-createcurrentEnable/disable IPv6 host mode on the interface.
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.26ColumnipNewCfgSecIntfAddrread-writecurrentThis field configures the new IPv6 addr of the interface. Address should be in IPv6 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of t…
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.27ColumnipNewCfgSecIntfPrefixread-writecurrentThe IPv6 prefix length (integer in range 0..128) associated with this IP address .
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.28ColumnipNewCfgIntfAnycastread-writecurrentThis field has the value of anycast(1) if IPv6 interface address is anycast and none(2) if not.
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.29ColumnipNewCfgSecIntfAnycastread-writecurrentThis field has the value of anycast(1) if secondary IPv6 interface address is anycast and none(2) if not.
1.3.6.1.4.1.20301.2.7.18.3.1.1.3.1.30ColumnipNewCfgIntfIp6Dstunread-createcurrentEnable/disable sending of ICMP Unreachable messages.
1.3.6.1.4.1.20301.2.7.18.3.1.2NodeipGatewayCfg
1.3.6.1.4.1.20301.2.7.18.3.1.2.3ScalaripGatewayTableMaxread-onlycurrentThe maximum number of rows in the IP gateway table.
1.3.6.1.4.1.20301.2.7.18.3.1.2.4TableipCurCfgGwTablenot-accessiblecurrentThe table of gateways in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.2.4.1RowipCurCfgGwEntrynot-accessiblecurrentA row in the Ip gateway table
1.3.6.1.4.1.20301.2.7.18.3.1.2.4.1.1ColumnipCurCfgGwIndexread-onlycurrentThe gateway number for which the information is related.
1.3.6.1.4.1.20301.2.7.18.3.1.2.4.1.2ColumnipCurCfgGwAddrread-onlycurrentThe IP address of the default gateway.
1.3.6.1.4.1.20301.2.7.18.3.1.2.4.1.3ColumnipCurCfgGwIntervalread-onlycurrentThe interval between ping attempts.
1.3.6.1.4.1.20301.2.7.18.3.1.2.4.1.4ColumnipCurCfgGwRetryread-onlycurrentThe number of failed attempts to declare the default gateway DOWN.
1.3.6.1.4.1.20301.2.7.18.3.1.2.4.1.5ColumnipCurCfgGwStateread-onlycurrentThe state of the default gateway.
1.3.6.1.4.1.20301.2.7.18.3.1.2.4.1.6ColumnipCurCfgGwArpread-onlycurrentThe state of ARP only health checks.
1.3.6.1.4.1.20301.2.7.18.3.1.2.5TableipNewCfgGwTablenot-accessiblecurrentThe table of gateway in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.2.5.1RowipNewCfgGwEntrynot-accessiblecurrentA row in the Ip default gateway table
1.3.6.1.4.1.20301.2.7.18.3.1.2.5.1.1ColumnipNewCfgGwIndexread-onlycurrentThe gateway number for which the information is related.
1.3.6.1.4.1.20301.2.7.18.3.1.2.5.1.2ColumnipNewCfgGwAddrread-createcurrentThe IP address of the default gateway.
1.3.6.1.4.1.20301.2.7.18.3.1.2.5.1.3ColumnipNewCfgGwIntervalread-createcurrentThe interval in seconds between ping attempts.
1.3.6.1.4.1.20301.2.7.18.3.1.2.5.1.4ColumnipNewCfgGwRetryread-createcurrentThe number of failed attempts to declare the default gateway DOWN.
1.3.6.1.4.1.20301.2.7.18.3.1.2.5.1.5ColumnipNewCfgGwStateread-createcurrentThe state of the default gateway.
1.3.6.1.4.1.20301.2.7.18.3.1.2.5.1.6ColumnipNewCfgGwDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect …
1.3.6.1.4.1.20301.2.7.18.3.1.2.5.1.7ColumnipNewCfgGwArpread-createcurrentThe state of the ARP only health checks.
1.3.6.1.4.1.20301.2.7.18.3.1.3NodeipStaticRouteCfg
1.3.6.1.4.1.20301.2.7.18.3.1.3.1ScalaripStaticRouteTableMaxSizeread-onlycurrentThe maximum number of rows in the Static Route table.
1.3.6.1.4.1.20301.2.7.18.3.1.3.2TableipCurCfgStaticRouteTablenot-accessiblecurrentThe table of static routes in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.3.2.1RowipCurCfgStaticRouteEntrynot-accessiblecurrentA row in the static IP route table
1.3.6.1.4.1.20301.2.7.18.3.1.3.2.1.1ColumnipCurCfgStaticRouteIndxread-onlycurrentThe index of the static routing table.
1.3.6.1.4.1.20301.2.7.18.3.1.3.2.1.2ColumnipCurCfgStaticRouteDestIpread-onlycurrentThe destination IP address of this route.
1.3.6.1.4.1.20301.2.7.18.3.1.3.2.1.3ColumnipCurCfgStaticRouteMaskread-onlycurrentThe current subnet mask of this route.
1.3.6.1.4.1.20301.2.7.18.3.1.3.2.1.4ColumnipCurCfgStaticRouteGatewayread-onlycurrentThe current gateway of this route.
1.3.6.1.4.1.20301.2.7.18.3.1.3.2.1.5ColumnipCurCfgStaticRouteInterfaceread-onlycurrentThe IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
1.3.6.1.4.1.20301.2.7.18.3.1.3.3TableipNewCfgStaticRouteTablenot-accessiblecurrentThe table of static routes in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.3.3.1RowipNewCfgStaticRouteEntrynot-accessiblecurrentA row in the static IP route table
1.3.6.1.4.1.20301.2.7.18.3.1.3.3.1.1ColumnipNewCfgStaticRouteIndxread-onlycurrentThe index of the static routing table.
1.3.6.1.4.1.20301.2.7.18.3.1.3.3.1.2ColumnipNewCfgStaticRouteDestIpread-createcurrentThe destination IP address of this route.
1.3.6.1.4.1.20301.2.7.18.3.1.3.3.1.3ColumnipNewCfgStaticRouteMaskread-createcurrentThe subnet mask of this route.
1.3.6.1.4.1.20301.2.7.18.3.1.3.3.1.4ColumnipNewCfgStaticRouteGatewayread-createcurrentThe IP address of the gateway for this route.
1.3.6.1.4.1.20301.2.7.18.3.1.3.3.1.5ColumnipNewCfgStaticRouteActionread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect …
1.3.6.1.4.1.20301.2.7.18.3.1.3.3.1.6ColumnipNewCfgStaticRouteInterfaceread-createcurrentThe IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
1.3.6.1.4.1.20301.2.7.18.3.1.3.4ScalaripStaticRouteClearAllByDestIpread-writecurrentClears all static routes with the specified destination IP address.
1.3.6.1.4.1.20301.2.7.18.3.1.3.5ScalaripStaticRouteClearAllByGatewayIpread-writecurrentClears all static routes with the specified gateway IP address.
1.3.6.1.4.1.20301.2.7.18.3.1.3.6ScalaripStaticRouteClearAllByInterfaceread-writecurrentClears all routes on the specified inteface number.
1.3.6.1.4.1.20301.2.7.18.3.1.3.7ScalaripStaticRouteClearAllread-writecurrentWhen set to clear(2),clears all static routes. Otherwhise nothing is done.
1.3.6.1.4.1.20301.2.7.18.3.1.3.8ScalaripStaticRouteCurPingIntervalread-onlycurrentThe time between ping retries.
1.3.6.1.4.1.20301.2.7.18.3.1.3.9ScalaripStaticRouteNewPingIntervalread-writecurrentThe time between ping retries.
1.3.6.1.4.1.20301.2.7.18.3.1.3.10ScalaripStaticRouteCurPingRetriesread-onlycurrentThe number of ping retries.
1.3.6.1.4.1.20301.2.7.18.3.1.3.11ScalaripStaticRouteNewPingRetriesread-writecurrentThe number of ping retries.
1.3.6.1.4.1.20301.2.7.18.3.1.3.12ScalaripStaticRouteCurEcmpHashread-onlycurrentEcmp Hash based on dipsip/sip.
1.3.6.1.4.1.20301.2.7.18.3.1.3.13ScalaripStaticRouteNewEcmpHashread-writecurrentEcmp Hash based on dipsip/sip.
1.3.6.1.4.1.20301.2.7.18.3.1.3.16ScalaripStaticRouteCurHealthcheckread-onlycurrentGateway healthcheck functionality
1.3.6.1.4.1.20301.2.7.18.3.1.3.17ScalaripStaticRouteNewHealthcheckread-writecurrentGateway healthcheck functionality
1.3.6.1.4.1.20301.2.7.18.3.1.4NodeipForwardCfg
1.3.6.1.4.1.20301.2.7.18.3.1.4.1NodeipFwdGeneralCfg
1.3.6.1.4.1.20301.2.7.18.3.1.4.1.1ScalaripFwdCurCfgStateread-onlycurrentIP forwarding global state.
1.3.6.1.4.1.20301.2.7.18.3.1.4.1.2ScalaripFwdNewCfgStateread-writecurrentIP forwarding global state.
1.3.6.1.4.1.20301.2.7.18.3.1.4.1.3ScalaripFwdCurCfgDirectedBcastread-onlycurrentEnable or disable forwarding directed broadcasts.
1.3.6.1.4.1.20301.2.7.18.3.1.4.1.4ScalaripFwdNewCfgDirectedBcastread-writecurrentEnable or disable forwarding directed broadcasts.
1.3.6.1.4.1.20301.2.7.18.3.1.4.1.7ScalaripFwdCurCfgICMPRedirectread-onlycurrentEnable or disable ICMP redirects.
1.3.6.1.4.1.20301.2.7.18.3.1.4.1.8ScalaripFwdNewCfgICMPRedirectread-writecurrentEnable or disable ICMP redirects.
1.3.6.1.4.1.20301.2.7.18.3.1.7NodearpCfg
1.3.6.1.4.1.20301.2.7.18.3.1.7.1ScalararpCurCfgReARPPeriodread-onlycurrentRe-ARP Period in seconds.
1.3.6.1.4.1.20301.2.7.18.3.1.7.2ScalararpNewCfgReARPPeriodread-writecurrentRe-ARP Period in seconds.
1.3.6.1.4.1.20301.2.7.18.3.1.7.3ScalararpCurCfgReARPRefreshread-onlycurrentWith ReARP Refresh enabled, the system will send an ARP request after the ReARP Period expires, trying to relearn the ARP entry. With ReARP Refresh disabled, n…
1.3.6.1.4.1.20301.2.7.18.3.1.7.4ScalararpNewCfgReARPRefreshread-writecurrentWith ReARP Refresh enabled, the system will send an ARP request after the ReARP Period expires, trying to relearn the ARP entry. With ReARP Refresh disabled, n…
1.3.6.1.4.1.20301.2.7.18.3.1.9NodednsCfg
1.3.6.1.4.1.20301.2.7.18.3.1.9.1ScalardnsCurCfgPrimaryIpAddrread-onlycurrentThe DNS primary IP address in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.9.2ScalardnsNewCfgPrimaryIpAddrread-writecurrentThe DNS primary IP address in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.9.3ScalardnsCurCfgSecondaryIpAddrread-onlycurrentThe DNS primary IP address in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.9.4ScalardnsNewCfgSecondaryIpAddrread-writecurrentThe DNS primary IP address in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.9.5ScalardnsCurCfgDomainNameread-onlycurrentThe DNS doamin name in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.9.6ScalardnsNewCfgDomainNameread-writecurrentThe DNS doamin name in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.9.9ScalardnsNewCfgFirstRequestAddrread-writecurrentType of the first request to dns
1.3.6.1.4.1.20301.2.7.18.3.1.9.10ScalardnsCurCfgFirstRequestAddrread-onlycurrentType of the first request to dns
1.3.6.1.4.1.20301.2.7.18.3.1.9.11ScalardnsCurCfgPriServerPortread-onlycurrentChoose the port that the primary server is connected to.
1.3.6.1.4.1.20301.2.7.18.3.1.9.12ScalardnsNewCfgPriServerPortread-writecurrentChoose the port that the primary server is connected to.
1.3.6.1.4.1.20301.2.7.18.3.1.9.13ScalardnsCurCfgSecServerPortread-onlycurrentChoose the port that the secondary server is connected to.
1.3.6.1.4.1.20301.2.7.18.3.1.9.14ScalardnsNewCfgSecServerPortread-writecurrentChoose the port that the secondary server is connected to.
1.3.6.1.4.1.20301.2.7.18.3.1.19NodeigmpCfg
1.3.6.1.4.1.20301.2.7.18.3.1.19.1ScalarigmpCurCfgOnOffread-onlycurrentGlobally turn IGMP On/Off.
1.3.6.1.4.1.20301.2.7.18.3.1.19.2ScalarigmpNewCfgOnOffread-writecurrentGlobally turn IGMP On/Off.
1.3.6.1.4.1.20301.2.7.18.3.1.19.9NodeigmpSnoopCfg
1.3.6.1.4.1.20301.2.7.18.3.1.19.9.7ScalarigmpSnoopCurCfgMrtoread-onlycurrentThe value of multicast router timeout in the current config.
1.3.6.1.4.1.20301.2.7.18.3.1.19.9.8ScalarigmpSnoopNewCfgMrtoread-writecurrentThe value of multicast router timeout in the new config.
1.3.6.1.4.1.20301.2.7.18.3.1.19.9.9ScalarigmpSnoopCurCfgAggrEnaDisread-onlycurrentEnable/Disable of IGMP Report aggregation.
1.3.6.1.4.1.20301.2.7.18.3.1.19.9.10ScalarigmpSnoopNewCfgAggrEnaDisread-writecurrentEnable/Disable of IGMP Report aggregation.
1.3.6.1.4.1.20301.2.7.18.3.1.19.9.11ScalarigmpSnoopCurCfgEnaDisread-onlycurrentThe current status of IGMP Snooping.
1.3.6.1.4.1.20301.2.7.18.3.1.19.9.12ScalarigmpSnoopNewCfgEnaDisread-writecurrentSet Enable/Disable of IGMP Snooping.
1.3.6.1.4.1.20301.2.7.18.3.1.19.9.13ScalarigmpSnoopNewCfgVlanAddread-writecurrentThe VLAN to be added to snooping vlan list. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.3.1.19.9.14ScalarigmpSnoopNewCfgVlanRemread-writecurrentThe VLAN to be removed from snooping vlan list. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.3.1.19.9.15ScalarigmpSnoopNewCfgVlanClearread-writecurrentRemoving ALL Snooping Vlans.
1.3.6.1.4.1.20301.2.7.18.3.1.19.9.16ScalarigmpSnoopCurCfgVlanBmapread-onlycurrentThe snooping vlans present in the vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxx…
1.3.6.1.4.1.20301.2.7.18.3.1.19.9.17ScalarigmpSnoopNewCfgVlanBmapread-writecurrentThe snooping vlans present in the vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxx…
1.3.6.1.4.1.20301.2.7.18.3.1.19.9.26ScalarigmpSnoopCurCfgSrcIpread-onlycurrentThe source ip for GSQ proxy in current config.
1.3.6.1.4.1.20301.2.7.18.3.1.19.9.27ScalarigmpSnoopNewCfgSrcIpread-writecurrentThe source ip for GSQ proxy in new config.
1.3.6.1.4.1.20301.2.7.18.3.1.19.9.33ScalarigmpSnoopSetToDefaultread-writecurrentWhen setting the value setDefault(2), the IGMP Snooping configuration is set to the default values. When reading, none(1) is always returned.
1.3.6.1.4.1.20301.2.7.18.3.1.19.10NodeigmpStaticMrtrCfg
1.3.6.1.4.1.20301.2.7.18.3.1.19.10.1TableigmpStaticMrtrCurCfgTablenot-accessiblecurrentThe IGMP Static Multicast Router table in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.19.10.1.1RowigmpStaticMrtrCurCfgTableEntrynot-accessiblecurrentA row in the Static Multicast Router table.
1.3.6.1.4.1.20301.2.7.18.3.1.19.10.1.1.1ColumnigmpStaticMrtrCurCfgIndxread-onlycurrentThe IGMP Multicast Router table port index.
1.3.6.1.4.1.20301.2.7.18.3.1.19.10.1.1.2ColumnigmpStaticMrtrCurCfgPortIdread-onlycurrentThe IGMP Multicast Router port in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.19.10.1.1.3ColumnigmpStaticMrtrCurCfgVlanIdread-onlycurrentThe IGMP Multicast Router port in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.19.10.1.1.4ColumnigmpStaticMrtrCurCfgVersionread-onlycurrentThe IGMP version of the IGMP Static Multicast Router.
1.3.6.1.4.1.20301.2.7.18.3.1.19.10.1.1.5ColumnigmpStaticMrtrCurCfgPortAliasread-onlycurrentThe IGMP Multicast Router port alias in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.19.10.2TableigmpStaticMrtrNewCfgTablenot-accessiblecurrentThe IGMP Static Multicast Router table in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.19.10.2.1RowigmpStaticMrtrNewCfgTableEntrynot-accessiblecurrentA row in the Static Multicast Router table.
1.3.6.1.4.1.20301.2.7.18.3.1.19.10.2.1.1ColumnigmpStaticMrtrNewCfgIndxread-onlycurrentThe IGMP Multicast Router table port index.
1.3.6.1.4.1.20301.2.7.18.3.1.19.10.2.1.2ColumnigmpStaticMrtrNewCfgPortIdread-writecurrentThe IGMP Multicast Router port in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.19.10.2.1.3ColumnigmpStaticMrtrNewCfgVlanIdread-writecurrentThe IGMP Multicast Router port in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.19.10.2.1.4ColumnigmpStaticMrtrNewCfgVersionread-writecurrentThe IGMP version of the IGMP Static Multicast Router.
1.3.6.1.4.1.20301.2.7.18.3.1.19.10.2.1.5ColumnigmpStaticMrtrNewCfgDeleteread-writecurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.20301.2.7.18.3.1.19.10.2.1.6ColumnigmpStaticMrtrNewCfgPortAliasread-writecurrentThe IGMP Multicast Router port alias in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.19.10.3ScalarigmpStaticMrtrNewCfgClearread-writecurrentWhen set to the value of 2 (clear), the entire table is deleted. When read, other(1) is returned. Setting the value to anything other than 2(clear) has no effe…
1.3.6.1.4.1.20301.2.7.18.3.1.19.11NodeigmpFilterCfg
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.1TableigmpFltCurCfgTablenot-accessiblecurrentThe IGMP filtering table in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.1.1RowigmpFltCurCfgTableEntrynot-accessiblecurrentA row in the filtering table.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.1.1.1ColumnigmpFltCurCfgIndxread-onlycurrentThe IGMP filter table index.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.1.1.2ColumnigmpFltCurCfgMcastIp1read-onlycurrentRange1 Multicast IP address to be filtered.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.1.1.3ColumnigmpFltCurCfgMcastIp2read-onlycurrentRange2 Multicast IP address to be filtered.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.1.1.4ColumnigmpFltCurCfgActionread-onlycurrentThe action for the IGMP filtering rule.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.1.1.5ColumnigmpFltCurCfgStateread-onlycurrentThe state of this IGMP filtering rule.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.2TableigmpFltNewCfgTablenot-accessiblecurrentThe IGMP filtering table in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.2.1RowigmpFltNewCfgTableEntrynot-accessiblecurrentA row in the filtering table.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.2.1.1ColumnigmpFltNewCfgIndxread-onlycurrentThe IGMP filter table index.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.2.1.2ColumnigmpFltNewCfgMcastIp1read-writecurrentRange1 Multicast source IP address to be filtered.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.2.1.3ColumnigmpFltNewCfgMcastIp2read-writecurrentRange2 Multicast source IP address to be filtered.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.2.1.4ColumnigmpFltNewCfgActionread-writecurrentThe action for the IGMP filtering rule.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.2.1.5ColumnigmpFltNewCfgStateread-writecurrentThe state of this IGMP filtering rule.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.2.1.6ColumnigmpFltNewCfgDeleteread-writecurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.3TableigmpFltCurCfgPortTablenot-accessiblecurrentThe IGMP filtering port table in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.3.1RowigmpFltCurCfgPortTableEntrynot-accessiblecurrentA row in the IGMP filtering port table.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.3.1.1ColumnigmpFltCurCfgPortIndxread-onlycurrentThe port index.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.3.1.2ColumnigmpFltCurCfgPortStateread-onlycurrentEnable or disable IGMP filtering.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.3.1.3ColumnigmpFltCurCfgPortFiltBmapread-onlycurrentThe IGMP filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .…
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.3.1.4ColumnigmpFltCurCfgPortAliasread-onlycurrentThe port alias.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.4TableigmpFltNewCfgPortTablenot-accessiblecurrentThe IGMP filtering port table in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.4.1RowigmpFltNewCfgPortTableEntrynot-accessiblecurrentA row in the IGMP filtering port table.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.4.1.1ColumnigmpFltNewCfgPortIndxread-onlycurrentThe port index.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.4.1.2ColumnigmpFltNewCfgPortStateread-writecurrentEnable or disable IGMP filtering.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.4.1.3ColumnigmpFltNewCfgPortFiltBmapread-onlycurrentThe IGMP filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .…
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.4.1.4ColumnigmpFltNewCfgPortAddFiltRuleread-writecurrentThis is an action object to add filtering rule to a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to b…
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.4.1.5ColumnigmpFltNewCfgPortRemFiltRuleread-writecurrentThis is an action object to remove filtering rule from a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule…
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.4.1.6ColumnigmpFltNewCfgPortAliasread-onlycurrentThe port alias.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.5ScalarigmpFltCurCfgEnaDisread-onlycurrentEnable/Disable of IGMP Filtering.
1.3.6.1.4.1.20301.2.7.18.3.1.19.11.6ScalarigmpFltNewCfgEnaDisread-writecurrentEnable/Disable of IGMP Filtering.
1.3.6.1.4.1.20301.2.7.18.3.1.19.13NodeigmpAdvCfg
1.3.6.1.4.1.20301.2.7.18.3.1.19.13.1ScalarigmpAdvCurCfgQIntervalread-onlycurrentThe IGMP Query Interval of current config.
1.3.6.1.4.1.20301.2.7.18.3.1.19.13.2ScalarigmpAdvNewCfgQIntervalread-writecurrentThe IGMP Query Interval of new config.
1.3.6.1.4.1.20301.2.7.18.3.1.19.13.3ScalarigmpAdvCurCfgRobustread-onlycurrentThe value of expected packet loss on subnet in current config.
1.3.6.1.4.1.20301.2.7.18.3.1.19.13.4ScalarigmpAdvNewCfgRobustread-writecurrentSet the value of expected packet loss on subnet.
1.3.6.1.4.1.20301.2.7.18.3.1.19.13.5ScalarigmpAdvCurCfgTimeoutread-onlycurrentThe IGMP Report timeout.
1.3.6.1.4.1.20301.2.7.18.3.1.19.13.6ScalarigmpAdvNewCfgTimeoutread-writecurrentSet IGMP Report timeout.
1.3.6.1.4.1.20301.2.7.18.3.1.19.13.7ScalarigmpAdvNewCfgVlanFastlvAddread-writecurrentThe VLAN to be added to quick-leave vlan list. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.3.1.19.13.8ScalarigmpAdvNewCfgVlanFastlvRemread-writecurrentThe VLAN to be removed from quick-leave vlan list. When read, 0 is returned.
1.3.6.1.4.1.20301.2.7.18.3.1.19.13.9ScalarigmpAdvCurCfgVlanFastlvBmapread-onlycurrentThe fast-leave enabled vlans present in the vlan map list. The fast-leave enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 .…
1.3.6.1.4.1.20301.2.7.18.3.1.19.13.10ScalarigmpAdvNewCfgVlanFastlvBmapread-writecurrentThe fast-leave enabled vlans present in the vlan map list. The fast-leave enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 .…
1.3.6.1.4.1.20301.2.7.18.3.1.19.13.15ScalarigmpAdvCurCfgRtrAlertread-onlycurrentEnable/disable sending IGMP messages with Router Alert option.
1.3.6.1.4.1.20301.2.7.18.3.1.19.13.16ScalarigmpAdvNewCfgRtrAlertread-writecurrentEnable/disable sending IGMP messages with Router Alert option.
1.3.6.1.4.1.20301.2.7.18.3.1.19.14NodeigmpV3SnoopCfg
1.3.6.1.4.1.20301.2.7.18.3.1.19.14.1ScalarigmpV3SnoopCurCfgSourcesread-onlycurrentNumber of sources to snoop in a group record in current config.
1.3.6.1.4.1.20301.2.7.18.3.1.19.14.2ScalarigmpV3SnoopNewCfgSourcesread-writecurrentNumber of sources to snoop in a group record in new config.
1.3.6.1.4.1.20301.2.7.18.3.1.19.14.3ScalarigmpV3SnoopCurCfgEnaDisread-onlycurrentThe current status of IGMP V3 Snooping.
1.3.6.1.4.1.20301.2.7.18.3.1.19.14.4ScalarigmpV3SnoopNewCfgEnaDisread-writecurrentSet Enable/Disable of IGMP V3 Snooping.
1.3.6.1.4.1.20301.2.7.18.3.1.19.14.5ScalarigmpV3SnoopCurCfgExcludeEnaDisread-onlycurrentThe current status of IGMP V3 EXCLUDE filter-mode Snooping.
1.3.6.1.4.1.20301.2.7.18.3.1.19.14.6ScalarigmpV3SnoopNewCfgExcludeEnaDisread-writecurrentSet Enable/Disable of IGMP V3 EXCLUDE filter-mode Snooping.
1.3.6.1.4.1.20301.2.7.18.3.1.19.14.7ScalarigmpV3SnoopCurCfgV1V2EnaDisread-onlycurrentThe current status of IGMP V1/V2 Report Snooping.
1.3.6.1.4.1.20301.2.7.18.3.1.19.14.8ScalarigmpV3SnoopNewCfgV1V2EnaDisread-writecurrentSet Enable/Disable of IGMP V1/V2 Report Snooping.
1.3.6.1.4.1.20301.2.7.18.3.1.19.15TableigmpCurQurCfgTablenot-accessiblecurrentThe table of IGMP querier configuration.
1.3.6.1.4.1.20301.2.7.18.3.1.19.15.1RowigmpCurQurCfgEntrynot-accessiblecurrentA row in the IGMP querier configuration table
1.3.6.1.4.1.20301.2.7.18.3.1.19.15.1.1ColumnigmpCurQurCfgVlanIndexread-onlycurrentThe vlan number for which the IGMP querier information is related.
1.3.6.1.4.1.20301.2.7.18.3.1.19.15.1.2ColumnigmpCurQuerierStateread-onlycurrentIndicates whether the switch is running as a querier in the VLAN. Based on the querier election, if elected as a querier, it will send query messages. If the s…
1.3.6.1.4.1.20301.2.7.18.3.1.19.15.1.3ColumnigmpCurCfgQuerierread-onlycurrentThe snooping switch can be configured to send IGMP queries. querier are not present in the VLAN and it set to 'enabled' the switch will generate general query …
1.3.6.1.4.1.20301.2.7.18.3.1.19.15.1.4ColumnigmpCurCfgQueryIntervalread-onlycurrentThis is the interval (in seconds) for which the switch sends general queries when it is configured as a querier for the VLAN.
1.3.6.1.4.1.20301.2.7.18.3.1.19.15.1.5ColumnigmpCurCfgQurSrcIpread-onlycurrentThe source ip for GSQ proxy in this vlan. This Src Ip will be used in querier election mechanism. It will be the source address in queries sent bye the switch.
1.3.6.1.4.1.20301.2.7.18.3.1.19.15.1.6ColumnigmpCurCfgElectionTyperead-onlycurrentThe querier selection type specify the criteria to be used to elect querier for this VLAN. When a switch is configured as a querier, this will define the elect…
1.3.6.1.4.1.20301.2.7.18.3.1.19.15.1.7ColumnigmpCurCfgQurRobustnessread-onlycurrentThe Robustness Variable allows tuning for the Other Querier Present Interval.
1.3.6.1.4.1.20301.2.7.18.3.1.19.15.1.8ColumnigmpCurCfgQurStartupCntread-onlycurrentRepresents the number of Queries sent out on startup of querier election, separated by the Startup Query Interval.
1.3.6.1.4.1.20301.2.7.18.3.1.19.15.1.9ColumnigmpCurCfgQurStartupIntread-onlycurrentThis variable represents the interval(in seconds) between General Queries sent by a Querier on startup. By default: 1/4 the Query Interval.
1.3.6.1.4.1.20301.2.7.18.3.1.19.15.1.10ColumnigmpCurCfgQurMaxRespTimeread-onlycurrentThe maximum query response interval advertised in IGMP queries on this VLAN.
1.3.6.1.4.1.20301.2.7.18.3.1.19.15.1.11ColumnigmpCurCfgOtherQurAddressread-onlycurrentThe IP/MAC Address of the Querier, which has won the Querier election, when bosSnoopVlanCfgQuerier is enabled on this vlan.
1.3.6.1.4.1.20301.2.7.18.3.1.19.15.1.12ColumnigmpCurCfgOtherQurPresentIntread-onlycurrentThe Other Querier Present Interval is the length of time that must pass before switch decides that there is no longer another multicast router which should be …
1.3.6.1.4.1.20301.2.7.18.3.1.19.15.1.13ColumnigmpCurCfgVlanOperVersionread-onlycurrentIndicates the operating version of the IGMP snooping switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 3 i.e, V3(3). Th…
1.3.6.1.4.1.20301.2.7.18.3.1.19.15.1.14ColumnigmpCurVlanOperVersionread-onlycurrentIndicates the operating version of the IGMP snooping switch for specific VLAN. The default operating mode on a specific VLAN IGMP version 3 i.e, V3(3).
1.3.6.1.4.1.20301.2.7.18.3.1.19.15.1.15ColumnigmpCurVlanOlderVerTimerread-onlycurrentIndicates the remaining time of lowest operating version of the vlan. For interoperability with multicast routers/switches/Hosts, running older versions of IGM…
1.3.6.1.4.1.20301.2.7.18.3.1.19.16TableigmpNewQurCfgTablenot-accessiblecurrentThe table of IGMP querier configuration.
1.3.6.1.4.1.20301.2.7.18.3.1.19.16.1RowigmpNewQurCfgEntrynot-accessiblecurrentA row in the IGMP querier configuration table
1.3.6.1.4.1.20301.2.7.18.3.1.19.16.1.1ColumnigmpNewQurCfgVlanIndexread-onlycurrentThe vlan number for which the IGMP querier information is related.
1.3.6.1.4.1.20301.2.7.18.3.1.19.16.1.2ColumnigmpNewQuerierStateread-onlycurrentIndicates whether the switch is running as a querier in the VLAN. Based on the querier election, if elected as a querier, it will send query messages. If the s…
1.3.6.1.4.1.20301.2.7.18.3.1.19.16.1.3ColumnigmpNewCfgQuerierread-writecurrentThe snooping switch can be configured to send IGMP queries. querier are not present in the VLAN and it set to 'enabled' the switch will generate general query …
1.3.6.1.4.1.20301.2.7.18.3.1.19.16.1.4ColumnigmpNewCfgQueryIntervalread-writecurrentThis is the interval (in seconds) for which the switch sends general queries when it is configured as a querier for the VLAN.
1.3.6.1.4.1.20301.2.7.18.3.1.19.16.1.5ColumnigmpNewCfgQurSrcIpread-writecurrentThe source ip for GSQ proxy in this vlan. This Src Ip will be used in querier election mechanism. It will be the source address in queries sent bye the switch.
1.3.6.1.4.1.20301.2.7.18.3.1.19.16.1.6ColumnigmpNewCfgElectionTyperead-writecurrentThe querier selection type specify the criteria to be used to elect querier for this VLAN. When a switch is configured as a querier, this will define the elect…
1.3.6.1.4.1.20301.2.7.18.3.1.19.16.1.7ColumnigmpNewCfgQurRobustnessread-writecurrentThe Robustness Variable allows tuning for the Other Querier Present Interval.
1.3.6.1.4.1.20301.2.7.18.3.1.19.16.1.8ColumnigmpNewCfgQurStartupCntread-writecurrentRepresents the number of Queries sent out on startup of querier election, separated by the Startup Query Interval.
1.3.6.1.4.1.20301.2.7.18.3.1.19.16.1.9ColumnigmpNewCfgQurStartupIntread-writecurrentThis variable represents the interval(in seconds) between General Queries sent by a Querier on startup. By default: 1/4 the Query Interval.
1.3.6.1.4.1.20301.2.7.18.3.1.19.16.1.10ColumnigmpNewCfgQurMaxRespTimeread-writecurrentThe maximum query response interval advertised in IGMP queries on this VLAN.
1.3.6.1.4.1.20301.2.7.18.3.1.19.16.1.11ColumnigmpNewCfgOtherQurAddressread-onlycurrentThe IP/MAC Address of the Querier, which has won the Querier election, when bosSnoopVlanCfgQuerier is enabled on this vlan.
1.3.6.1.4.1.20301.2.7.18.3.1.19.16.1.12ColumnigmpNewCfgOtherQurPresentIntread-onlycurrentThe Other Querier Present Interval is the length of time that must pass before switch decides that there is no longer another multicast router which should be …
1.3.6.1.4.1.20301.2.7.18.3.1.19.16.1.13ColumnigmpNewCfgVlanOperVersionread-writecurrentIndicates the operating version of the IGMP snooping switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 3 i.e, V3(3). Th…
1.3.6.1.4.1.20301.2.7.18.3.1.19.16.1.14ColumnigmpNewVlanOperVersionread-onlycurrentIndicates the operating version of the IGMP snooping switch for specific VLAN. The default operating mode on a specific VLAN IGMP version 3 i.e, V3(3).
1.3.6.1.4.1.20301.2.7.18.3.1.19.16.1.15ColumnigmpNewVlanOlderVerTimerread-onlycurrentIndicates the remaining time of lowest operating version of the vlan. For interoperability with multicast routers/switches/Hosts, running older versions of IGM…
1.3.6.1.4.1.20301.2.7.18.3.1.19.16.1.16ColumnigmpNewCfgQuerierDefaultread-writecurrentAction to set the default IGMP Querier settings on a Vlan. Returns other(1) when read.
1.3.6.1.4.1.20301.2.7.18.3.1.19.17ScalarigmpCurCfgQuerierOnOffread-onlycurrentThe current status of IGMP Querier.
1.3.6.1.4.1.20301.2.7.18.3.1.19.18ScalarigmpNewCfgQuerierOnOffread-writecurrentGlobally turn IGMP Querier On/Off.
1.3.6.1.4.1.20301.2.7.18.3.1.20NodeipmcStaticRouteCfg
1.3.6.1.4.1.20301.2.7.18.3.1.20.1ScalaripmcStaticRouteTableMaxSizeread-onlycurrentThe maximum number of rows in the IPMC Static Route table.
1.3.6.1.4.1.20301.2.7.18.3.1.20.2TableipmcCurCfgStaticRouteTablenot-accessiblecurrentThe table of static IPMC routes in the current configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.20.2.1RowipmcCurCfgStaticRouteEntrynot-accessiblecurrentA row in the static IPMC route table
1.3.6.1.4.1.20301.2.7.18.3.1.20.2.1.1ColumnipmcCurCfgStaticRouteIndxread-onlycurrentThe index of the IPMC static routing table.
1.3.6.1.4.1.20301.2.7.18.3.1.20.2.1.2ColumnipmcCurCfgStaticRouteDestIpread-onlycurrentThe destination IPMC address of this IPMC route.
1.3.6.1.4.1.20301.2.7.18.3.1.20.2.1.3ColumnipmcCurCfgStaticRouteVlanIdread-onlycurrentThe vlan id of this route.
1.3.6.1.4.1.20301.2.7.18.3.1.20.2.1.4ColumnipmcCurCfgStaticRouteHostBmapread-onlycurrentThe Host ports that are added to this IPMC port bitmap. The selected ports are presented in a bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx …
1.3.6.1.4.1.20301.2.7.18.3.1.20.2.1.5ColumnipmcCurCfgStaticRoutePMrtrBmapread-onlycurrentThe Primary Mrouter ports that are added to this IPMC port bitmap. The selected ports are presented in a bitmap format in receiving order: OCTET 1 OCTET 2 ....…
1.3.6.1.4.1.20301.2.7.18.3.1.20.2.1.6ColumnipmcCurCfgStaticRouteBMrtrBmapread-onlycurrentThe Backup Mrouter ports that are added to this IPMC port bitmap. The selected ports are presented in a bitmap format in receiving order: OCTET 1 OCTET 2 .....…
1.3.6.1.4.1.20301.2.7.18.3.1.20.2.1.8ColumnipmcCurCfgStaticRouteAdminkeysread-onlycurrentThe LACP port adminkey of this route. Adminkeys on five positions alligned to right, separated by commas.
1.3.6.1.4.1.20301.2.7.18.3.1.20.2.1.9ColumnipmcCurCfgStaticRouteTrunksread-onlycurrentThe trunk list for this IPMC route. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk…
1.3.6.1.4.1.20301.2.7.18.3.1.20.3TableipmcNewCfgStaticRouteTablenot-accessiblecurrentThe table of IPMC static routes in the new configuration block. When creating a new route, Destination IP and Vlan id must be set first. The actual change in c…
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1RowipmcNewCfgStaticRouteEntrynot-accessiblecurrentA row in the static IPMC route table
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1.1ColumnipmcNewCfgStaticRouteIndxread-onlycurrentThe index of the IPMC static routing table.
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1.2ColumnipmcNewCfgStaticRouteDestIpread-createcurrentThe destination IPMC address of this route. It must be set along Vlan id before creating new route.
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1.3ColumnipmcNewCfgStaticRouteVlanIdread-createcurrentThe vlan id of this route. It must be set along Destination IP before creating new route.
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1.4ColumnipmcNewCfgStaticRouteHostBmapread-onlycurrentThe Host ports that are added to this IPMC port bitmap. The selected ports are presented in a bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx …
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1.5ColumnipmcNewCfgStaticRoutePMrtrBmapread-onlycurrentThe Primary Mrouter ports that are added to this IPMC port bitmap. The selected ports are presented in a bitmap format in receiving order: OCTET 1 OCTET 2 ....…
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1.6ColumnipmcNewCfgStaticRouteBMrtrBmapread-onlycurrentThe Backup Mrouter ports that are added to this IPMC port bitmap. The selected ports are presented in a bitmap format in receiving order: OCTET 1 OCTET 2 .....…
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1.7ColumnipmcNewCfgStaticRouteAddPortIndexread-createcurrentThe port to be added to this IPMC route. Next step is using ipmcNewCfgStaticRoutePortInfo leaf in order to make the actual change. When creating a new route, b…
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1.8ColumnipmcNewCfgStaticRouteTrunksread-onlycurrentThe trunk list for this IPMC route. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk…
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1.9ColumnipmcNewCfgStaticRouteAddTrunkread-createcurrentThe trunk group number to be added to this IPMC route. Next step is using ipmcNewCfgStaticRoutePortInfo leaf in order to make the actual change. A '0' value is…
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1.10ColumnipmcNewCfgStaticRouteRemTrunkread-createcurrentThe trunk group number to be removed from this IPMC route. Next step is using ipmcNewCfgStaticRoutePortInfo leaf in order to make the actual change. A '0' valu…
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1.11ColumnipmcNewCfgStaticRouteAdminkeysread-onlycurrentThe LACP port adminkeys list for to this IPMC route. Adminkeys on five positions alligned to right, separated by commas
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1.12ColumnipmcNewCfgStaticRouteAddAdminkeyread-writecurrentThe LACP port adminkey to be added to this IPMC route. Next step is using ipmcNewCfgStaticRoutePortInfo leaf in order to make the actual change. A '0' value is…
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1.13ColumnipmcNewCfgStaticRouteRemAdminkeyread-writecurrentThe LACP port adminkey to be removed from this IPMC route. Next step is using ipmcNewCfgStaticRoutePortInfo leaf in order to make the actual change. A '0' valu…
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1.14ColumnipmcNewCfgStaticRoutePortInforead-createcurrentThe Port/Trunk/Adminkey Information to be added to this IPMC route (host/primary/backup). Use it only right after you set a new port/trunk/adminkey to specify …
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1.16ColumnipmcNewCfgStaticRouteDeleteread-writecurrentDelete this route.
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1.17ColumnipmcNewCfgStaticRouteRemPortIndexread-createcurrentThe port to be removed from this IPMC route. Not allowed to delete ports that are part of trunks.
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1.18ColumnipmcNewCfgStaticRouteAddPortAliasread-createcurrentThe port to be added to this IPMC route. Next step is using ipmcNewCfgStaticRoutePortInfo leaf in order to make the actual change. When creating a new route, b…
1.3.6.1.4.1.20301.2.7.18.3.1.20.3.1.19ColumnipmcNewCfgStaticRouteRemPortAliasread-createcurrentThe port to be removed from this IPMC route. Not allowed to delete ports that are part of trunks.
1.3.6.1.4.1.20301.2.7.18.3.1.20.4ScalaripmcStaticRouteClearAllread-writecurrentWhen set to clear(2),clears all static IPMC routes. Otherwhise nothing is done.
1.3.6.1.4.1.20301.2.7.18.3.1.22NodeipGatewayIpv6Cfg
1.3.6.1.4.1.20301.2.7.18.3.1.22.1ScalaripGatewayIpv6TableMaxread-onlycurrentThe maximum number of rows in the IPv6 gateway table.
1.3.6.1.4.1.20301.2.7.18.3.1.22.2TableipCurCfgGwIpv6Tablenot-accessiblecurrentThe table of IPv6 gateways in the Current configuration Block.
1.3.6.1.4.1.20301.2.7.18.3.1.22.2.1RowipCurCfgGwIpv6Entrynot-accessiblecurrentA row in the Ipv6 gateway table
1.3.6.1.4.1.20301.2.7.18.3.1.22.2.1.1ColumnipCurCfgGwIpv6Indexread-onlycurrentThe IPv6 gateway number for which the information is related.
1.3.6.1.4.1.20301.2.7.18.3.1.22.2.1.2ColumnipCurCfgGwIpv6Addrread-onlycurrentThe IPv6 address of the gateway. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx…
1.3.6.1.4.1.20301.2.7.18.3.1.22.2.1.3ColumnipCurCfgGwIpv6Stateread-onlycurrentThe state of the default IPv6 gateway.
1.3.6.1.4.1.20301.2.7.18.3.1.22.3TableipNewCfgGwIpv6Tablenot-accessiblecurrentThe table of IPv6 gateways in the new configuration block.
1.3.6.1.4.1.20301.2.7.18.3.1.22.3.1RowipNewCfgGwIpv6Entrynot-accessiblecurrentA row in the Ipv6 gateway table
1.3.6.1.4.1.20301.2.7.18.3.1.22.3.1.1ColumnipNewCfgGwIpv6Indexread-onlycurrentThe IPv6 gateway number for which the information is related.
1.3.6.1.4.1.20301.2.7.18.3.1.22.3.1.2ColumnipNewCfgGwIpv6Addrread-createcurrentThe IPv6 address of the gateway. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx…
1.3.6.1.4.1.20301.2.7.18.3.1.22.3.1.3ColumnipNewCfgGwIpv6Stateread-createcurrentThe state of the default IPv6 gateway.
1.3.6.1.4.1.20301.2.7.18.3.1.22.3.1.4ColumnipNewCfgGwIpv6Deleteread-createcurrentWhen set to the value of 2 (delete), the default gw is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect …
1.3.6.1.4.1.20301.2.7.18.3.1.29NodefloodingCfg
1.3.6.1.4.1.20301.2.7.18.3.1.29.1TablevlanFloodCurCfgTablenot-accessiblecurrentThe table of VLAN flooding configuration.
1.3.6.1.4.1.20301.2.7.18.3.1.29.1.1RowvlanFloodCurCfgTableEntrynot-accessiblecurrentA row in the VLAN flooding configuration table.
1.3.6.1.4.1.20301.2.7.18.3.1.29.1.1.1ColumnvlanFloodCurCfgVlanIdread-onlycurrentThe VLAN identifier.
1.3.6.1.4.1.20301.2.7.18.3.1.29.1.1.2ColumnvlanFloodCurCfgFloodread-onlycurrentEnable or disable flooding unregistered IPMCs
1.3.6.1.4.1.20301.2.7.18.3.1.29.1.1.3ColumnvlanFloodCurCfgCpuread-onlycurrentEnable or disable sending unregistered IPMCs to CPU
1.3.6.1.4.1.20301.2.7.18.3.1.29.1.1.4ColumnvlanFloodCurCfgOptFloodread-onlycurrentEnable or disable optimized flooding
1.3.6.1.4.1.20301.2.7.18.3.1.29.2TablevlanFloodNewCfgTablenot-accessiblecurrentThe table of VLAN flooding configuration.
1.3.6.1.4.1.20301.2.7.18.3.1.29.2.1RowvlanFloodNewCfgTableEntrynot-accessiblecurrentA row in the VLAN flooding configuration table.
1.3.6.1.4.1.20301.2.7.18.3.1.29.2.1.1ColumnvlanFloodNewCfgVlanIdread-onlycurrentThe VLAN identifier.
1.3.6.1.4.1.20301.2.7.18.3.1.29.2.1.2ColumnvlanFloodNewCfgFloodread-writecurrentEnable or disable flooding unregistered IPMCs
1.3.6.1.4.1.20301.2.7.18.3.1.29.2.1.3ColumnvlanFloodNewCfgCpuread-writecurrentEnable or disable sending unregistered IPMCs to CPU
1.3.6.1.4.1.20301.2.7.18.3.1.29.2.1.4ColumnvlanFloodNewCfgOptFloodread-writecurrentEnable or disable optimized flooding
1.3.6.1.4.1.20301.2.7.18.3.2Nodelayer3Stats
1.3.6.1.4.1.20301.2.7.18.3.2.2NodearpStats
1.3.6.1.4.1.20301.2.7.18.3.2.2.1ScalararpStatEntriesread-onlycurrentThe current number of ARP entries.
1.3.6.1.4.1.20301.2.7.18.3.2.2.2ScalararpStatHighWaterread-onlycurrentThe highest number of ARP entries.
1.3.6.1.4.1.20301.2.7.18.3.2.2.3ScalararpStatMaxEntriesread-onlycurrentThe maximum number of ARP entries.
1.3.6.1.4.1.20301.2.7.18.3.2.2.4ScalarmgmtArpStatEntriesread-onlycurrentThe current number of ARP entries on management port.
1.3.6.1.4.1.20301.2.7.18.3.2.2.5ScalarmgmtArpStatHighWaterread-onlycurrentThe highest number of ARP entries on management port.
1.3.6.1.4.1.20301.2.7.18.3.2.3NoderouteStats
1.3.6.1.4.1.20301.2.7.18.3.2.3.1ScalarrouteStatEntriesread-onlycurrentThe current number of IP routes.
1.3.6.1.4.1.20301.2.7.18.3.2.3.2ScalarrouteStatHighWaterread-onlycurrentThe highest number of IP routes.
1.3.6.1.4.1.20301.2.7.18.3.2.3.3ScalarrouteStatStaticEntriesread-onlycurrentCurrent static routes.
1.3.6.1.4.1.20301.2.7.18.3.2.3.5ScalarrouteStatOspfEntriesread-onlycurrentCurrent OSPF routes.
1.3.6.1.4.1.20301.2.7.18.3.2.3.7ScalarrouteStatMaxEntriesread-onlycurrentThe maximum number of IP routes.
1.3.6.1.4.1.20301.2.7.18.3.2.3.8ScalarrouteStatEcmpMaxEntriesread-onlycurrentMaximum number of ECMP routes.
1.3.6.1.4.1.20301.2.7.18.3.2.3.9ScalarrouteStatEcmpMaxStaticEntriesread-onlycurrentMaximum number of static ECMP routes.
1.3.6.1.4.1.20301.2.7.18.3.2.3.11ScalarrouteStatEcmpPathsEntriesread-onlycurrentNumber of routes with ECMP paths.
1.3.6.1.4.1.20301.2.7.18.3.2.4NodednsStats
1.3.6.1.4.1.20301.2.7.18.3.2.4.1ScalardnsStatInGoodDnsRequestsread-onlycurrentThe total number of DNS request packets which are received.
1.3.6.1.4.1.20301.2.7.18.3.2.4.2ScalardnsStatInBadDnsRequestsread-onlycurrentThe total number of DNS request packets received that were dropped.
1.3.6.1.4.1.20301.2.7.18.3.2.4.3ScalardnsStatOutDnsRequestsread-onlycurrentThe total number of DNS request packets that have been transmitted.
1.3.6.1.4.1.20301.2.7.18.3.2.7NodeclearStats
1.3.6.1.4.1.20301.2.7.18.3.2.7.1ScalaripClearStatsread-writecurrentSetting this to clear(2) results in clearing the IP statistics.
1.3.6.1.4.1.20301.2.7.18.3.2.7.5ScalartcpClearStatsread-writecurrentSetting this to clear(1) results in clearing the TCP statistics.
1.3.6.1.4.1.20301.2.7.18.3.2.7.6ScalarudpClearStatsread-writecurrentSetting this to clear(1) results in clearing the UDP statistics.
1.3.6.1.4.1.20301.2.7.18.3.2.7.7ScalardnsClearStatsread-writecurrentSetting this to clear(1) results in clearing the DNS statistics.
1.3.6.1.4.1.20301.2.7.18.3.2.7.9ScalaricmpClearStatsread-writecurrentSetting this to clear(1) results in clearing the ICMP statistics.
1.3.6.1.4.1.20301.2.7.18.3.2.7.13Scalaripv6ClearStatsread-writecurrentSetting this to clear(1) results in clearing the IPv6 statistics.
1.3.6.1.4.1.20301.2.7.18.3.2.7.14Scalaripv6ClearIcmpStatsread-writecurrentSetting this to clear(1) results in clearing the ICMP6 statistics.
1.3.6.1.4.1.20301.2.7.18.3.2.7.15Scalaripv6ClearUdpStatsread-writecurrentSetting this to clear(1) results in clearing the UDP6 statistics.
1.3.6.1.4.1.20301.2.7.18.3.2.9NodeigmpStats
1.3.6.1.4.1.20301.2.7.18.3.2.9.1TableigmpSnoopStatsnot-accessiblecurrentStatistics for IGMP Snooping.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1RowigmpSnoopStatsEntrynot-accessiblecurrentStatistics for IGMP Snooping.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1.1ColumnigmpSnoopVlanIndexread-onlycurrentThe index of the VLAN for which these statistics apply.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1.2ColumnrxIgmpValidPktsread-onlycurrentThe total number of valid IGMP packets received on this VLAN.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1.3ColumnrxIgmpInvalidPktsread-onlycurrentThe total number of invalid IGMP packets received on this VLAN.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1.4ColumnrxIgmpGenQueriesread-onlycurrentThe total number of IGMP General Query packets received on this VLAN.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1.5ColumnrxIgmpGrpSpecificQueriesread-onlycurrentThe total number of IGMP Group Specific Query packets received on this VLAN.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1.6ColumnrxIgmpLeavesread-onlycurrentThe total number of IGMP Leave packets received on this VLAN.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1.7ColumnrxIgmpReportsread-onlycurrentThe total number of IGMP Report packets received on this VLAN.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1.8ColumntxIgmpGrpSpecificQueriesread-onlycurrentThe total number of IGMP Group Specific Query packets transmitted on this VLAN.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1.9ColumntxIgmpReportsread-onlycurrentThe total number of IGMP Report packets transmitted on this VLAN.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1.10ColumntxIgmpLeavesread-onlycurrentThe total number of IGMP Leave packets transmitted on this VLAN.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1.11ColumnrxIgmpGroupSourceSpecificQueriesread-onlycurrentThe total number of IGMP Group Source Specific (GSSQ) Queries received on this VLAN.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1.12ColumnrxIgmpV3CurrentStateRecordsread-onlycurrentThe total number of IGMP Current State Records (CSRs) received on this VLAN.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1.13ColumnrxIgmpV3SourceListChangeRecordsread-onlycurrentThe total number of IGMP Source List Change Records (SLCRs) received on this VLAN.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1.14ColumnrxIgmpV3FilterChangeRecordsread-onlycurrentThe total number of IGMP Filter Mode Change Records (FMCRs) received on this VLAN.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1.16ColumntxIgmpGenQueriesread-onlycurrentThe total number of IGMP General Query packets send on this VLAN.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1.17ColumnrxIgmpDiscardPktsread-onlycurrentThe total number of IGMP packets discarded on this VLAN.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1.18ColumnrxIgmpPimHellosread-onlycurrentThe total number of Pim Hello packets received on this VLAN.
1.3.6.1.4.1.20301.2.7.18.3.2.9.1.1.19ColumnigmpClearVlanStatsread-writecurrentSetting this to clear(1) results in clearing the statistics for this snooping VLAN.
1.3.6.1.4.1.20301.2.7.18.3.2.9.2ScalarigmpClearAllStatsread-writecurrentSetting this to clear(1) results in clearing the IGMP statistics.
1.3.6.1.4.1.20301.2.7.18.3.2.9.3ScalarigmpStatsTotalIgmpGroupsread-onlycurrentThe total number of IGMP groups.
1.3.6.1.4.1.20301.2.7.18.3.2.9.4ScalarigmpStatsTotalIpmcGroupsread-onlycurrentThe total number of IPMC groups.
1.3.6.1.4.1.20301.2.7.18.3.2.10Nodeipv6Stats
1.3.6.1.4.1.20301.2.7.18.3.2.10.1Scalaripv6InReceivesread-onlycurrentThe total number of input datagrams received from interfaces, including those received in error.
1.3.6.1.4.1.20301.2.7.18.3.2.10.2Scalaripv6InMcastsread-onlycurrentThe total number of multicast packets received from interfaces, including those received in error.
1.3.6.1.4.1.20301.2.7.18.3.2.10.3Scalaripv6InDeliversread-onlycurrentTotal datagrams given to upper layer - ICMP/UDP
1.3.6.1.4.1.20301.2.7.18.3.2.10.4Scalaripv6InDiscardsread-onlycurrentTotal datagrams discarded despite no errors
1.3.6.1.4.1.20301.2.7.18.3.2.10.5Scalaripv6InHdrerrsread-onlycurrentTotal datagrams with error in IPv6/Option headers
1.3.6.1.4.1.20301.2.7.18.3.2.10.6Scalaripv6InAddrerrsread-onlycurrentTotal datagrams with error in destination address
1.3.6.1.4.1.20301.2.7.18.3.2.10.7Scalaripv6InUnkprotsread-onlycurrentTotal datagrams with unknown/unsupported protocol
1.3.6.1.4.1.20301.2.7.18.3.2.10.8Scalaripv6InTruncsread-onlycurrentTotal datagrams with insufficient data
1.3.6.1.4.1.20301.2.7.18.3.2.10.10Scalaripv6OutMcastsread-onlycurrentTotal sent multicast pkts
1.3.6.1.4.1.20301.2.7.18.3.2.10.11Scalaripv6ForwDgramsread-onlycurrentTotal datagrams attempted to be forwarded
1.3.6.1.4.1.20301.2.7.18.3.2.10.12Scalaripv6TooBigerrsread-onlycurrentTotal datagrams which could not be forwarded as their size exceeds (Path) MTU
1.3.6.1.4.1.20301.2.7.18.3.2.10.13Scalaripv6OutReqsread-onlycurrentTotal datagrams attempted to be sent
1.3.6.1.4.1.20301.2.7.18.3.2.10.14Scalaripv6OutDiscardsread-onlycurrentTotal outgoing Datagrams discarded despite no errors
1.3.6.1.4.1.20301.2.7.18.3.2.10.15Scalaripv6OutNortsread-onlycurrentTotal datagrams discarded due to no routes
1.3.6.1.4.1.20301.2.7.18.3.2.10.16Scalaripv6Reasmreqsread-onlycurrentTotal datagrams needing reassembly
1.3.6.1.4.1.20301.2.7.18.3.2.10.17Scalaripv6Reasmoksread-onlycurrentTotal datagrams successfully reassembled
1.3.6.1.4.1.20301.2.7.18.3.2.10.18Scalaripv6Reasmfailsread-onlycurrentTotal datagrams for witch reassembly failured
1.3.6.1.4.1.20301.2.7.18.3.2.10.19Scalaripv6Fragoksread-onlycurrentTotal datagrams successfully fragmented
1.3.6.1.4.1.20301.2.7.18.3.2.10.20Scalaripv6Fragfailsread-onlycurrentTotal datagrams for witch fragmentation failured
1.3.6.1.4.1.20301.2.7.18.3.2.10.21Scalaripv6Fragcreatesread-onlycurrentTotal number of fragments created
1.3.6.1.4.1.20301.2.7.18.3.2.10.22Scalaripv6InNsolsread-onlycurrentTotal number of received Neighbor Solicitations
1.3.6.1.4.1.20301.2.7.18.3.2.10.23Scalaripv6InNadvsread-onlycurrentTotal number of received Neighbor Advertisements
1.3.6.1.4.1.20301.2.7.18.3.2.10.25Scalaripv6InRoutsolsread-onlycurrentTotal number of received Router Solicitations
1.3.6.1.4.1.20301.2.7.18.3.2.10.26Scalaripv6InRoutadvsread-onlycurrentTotal number of received Router Advertisements
1.3.6.1.4.1.20301.2.7.18.3.2.10.27Scalaripv6InRoutRedirsread-onlycurrentTotal number of received Router Redirect messages
1.3.6.1.4.1.20301.2.7.18.3.2.10.28Scalaripv6OutNsolsread-onlycurrentTotal number of sent Neighbor Solicitations
1.3.6.1.4.1.20301.2.7.18.3.2.10.29Scalaripv6OutNadvsread-onlycurrentTotal number of sent Neighbor Advertisements
1.3.6.1.4.1.20301.2.7.18.3.2.10.30Scalaripv6OutRoutadvsread-onlycurrentTotal number of sent Router Advertisements
1.3.6.1.4.1.20301.2.7.18.3.2.10.31Scalaripv6OutRedirsread-onlycurrentTotal number of sent Redirects
1.3.6.1.4.1.20301.2.7.18.3.2.10.32Scalaripv6OutRoutSolsread-onlycurrentTotal number of sent Router Solicitations
1.3.6.1.4.1.20301.2.7.18.3.2.10.39Scalaripv6icmpInMsgsread-onlycurrentThe total number of ICMP messages received.
1.3.6.1.4.1.20301.2.7.18.3.2.10.40Scalaripv6icmpInErrsread-onlycurrentThe total number of ICMP messages attempted to send.
1.3.6.1.4.1.20301.2.7.18.3.2.10.41Scalaripv6icmpInBadcoderead-onlycurrentThe total number of ICMP messages in bad code.
1.3.6.1.4.1.20301.2.7.18.3.2.10.42Scalaripv6icmpInToobigread-onlycurrentThe number of ICMP too big messages received.
1.3.6.1.4.1.20301.2.7.18.3.2.10.43Scalaripv6icmpInDstUnreachread-onlycurrentThe number of ICMP Destination Unreachable messages received.
1.3.6.1.4.1.20301.2.7.18.3.2.10.44Scalaripv6icmpInTmexceededread-onlycurrentThe number of ICMP Time Exceeded messages received.
1.3.6.1.4.1.20301.2.7.18.3.2.10.45Scalaripv6icmpInParamprobread-onlycurrentThe number of ICMP Parameter Problem messages received.
1.3.6.1.4.1.20301.2.7.18.3.2.10.46Scalaripv6icmpInEchoReqread-onlycurrentThe number of ICMP Echo request messages received.
1.3.6.1.4.1.20301.2.7.18.3.2.10.47Scalaripv6icmpInEchoRespread-onlycurrentThe number of ICMP Echo Reply messages received.
1.3.6.1.4.1.20301.2.7.18.3.2.10.48Scalaripv6icmpOutMsgsread-onlycurrentThe total number of ICMP messages which this entity attempted to send.
1.3.6.1.4.1.20301.2.7.18.3.2.10.49Scalaripv6icmpOutErrsread-onlycurrentThe number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers.
1.3.6.1.4.1.20301.2.7.18.3.2.10.50Scalaripv6icmpOutDstUnreachread-onlycurrentThe number of ICMP Destination Unreachable messages sent.
1.3.6.1.4.1.20301.2.7.18.3.2.10.51Scalaripv6icmpOutToobigread-onlycurrentThe number of ICMP too big messages sent.
1.3.6.1.4.1.20301.2.7.18.3.2.10.52Scalaripv6icmpOutTmexceededread-onlycurrentThe number of ICMP Time Exceeded messages sent.
1.3.6.1.4.1.20301.2.7.18.3.2.10.53Scalaripv6icmpOutParamprobread-onlycurrentThe number of ICMP Parameter Problem messages sent.
1.3.6.1.4.1.20301.2.7.18.3.2.10.54Scalaripv6icmpOutEchoReqread-onlycurrentThe number of ICMP Echo request messages sent.
1.3.6.1.4.1.20301.2.7.18.3.2.10.55Scalaripv6icmpOutEchoRespread-onlycurrentThe number of ICMP Echo Reply messages sent.
1.3.6.1.4.1.20301.2.7.18.3.2.10.56Scalaripv6icmpInRouterSolread-onlycurrentThe number of ICMP router solicitations received.
1.3.6.1.4.1.20301.2.7.18.3.2.10.57Scalaripv6icmpInRouterAdvread-onlycurrentThe number of ICMP router advertisements received.
1.3.6.1.4.1.20301.2.7.18.3.2.10.58Scalaripv6icmpInNeighSolread-onlycurrentThe number of ICMP neighbor solicitations received.
1.3.6.1.4.1.20301.2.7.18.3.2.10.59Scalaripv6icmpInNeighAdvread-onlycurrentThe number of ICMP neighbor advertisements received.
1.3.6.1.4.1.20301.2.7.18.3.2.10.60Scalaripv6icmpInRedirread-onlycurrentThe number of ICMP Redirect messages received.
1.3.6.1.4.1.20301.2.7.18.3.2.10.61Scalaripv6icmpOutRouterSolread-onlycurrentThe number of ICMP router solicitations sent.
1.3.6.1.4.1.20301.2.7.18.3.2.10.62Scalaripv6icmpOutRouterAdvread-onlycurrentThe number of ICMP router advertisements sent.
1.3.6.1.4.1.20301.2.7.18.3.2.10.63Scalaripv6icmpOutNeighSolread-onlycurrentThe number of ICMP neighbor solicitations sent.
1.3.6.1.4.1.20301.2.7.18.3.2.10.64Scalaripv6icmpOutNeighAdvread-onlycurrentThe number of ICMP neighbor advertisements sent.
1.3.6.1.4.1.20301.2.7.18.3.2.10.65Scalaripv6icmpOutRedirread-onlycurrentThe number of ICMP Redirect messages sent.
1.3.6.1.4.1.20301.2.7.18.3.2.10.66Scalaripv6udpInDgramsread-onlycurrentTotal number of UDP received datagrams.
1.3.6.1.4.1.20301.2.7.18.3.2.10.67Scalaripv6udpInErrsread-onlycurrentTotal number of UDP error encountered during processing of packet.
1.3.6.1.4.1.20301.2.7.18.3.2.10.68Scalaripv6udpOutDgramsread-onlycurrentTotal number of UDP datagrams passed to IP6 layer.
1.3.6.1.4.1.20301.2.7.18.3.2.10.69Scalaripv6udpNumPortsread-onlycurrentTotal number of UDP ports that are currently open.
1.3.6.1.4.1.20301.2.7.18.3.2.10.70Scalaripv6icmpInAdminProhibread-onlycurrentThe total number of received Destination Unreachable ICMP packets.
1.3.6.1.4.1.20301.2.7.18.3.2.10.71Scalaripv6icmpOutAdminProhibread-onlycurrentThe total number of sent Destination Unreachable ICMP packets.
1.3.6.1.4.1.20301.2.7.18.3.2.16NodeipStats
1.3.6.1.4.1.20301.2.7.18.3.2.16.1ScalaripStatsInReceivesread-onlycurrentip InReceive
1.3.6.1.4.1.20301.2.7.18.3.2.16.2ScalaripStatsInHdrErrorsread-onlycurrentip InHdrError
1.3.6.1.4.1.20301.2.7.18.3.2.16.3ScalaripStatsInAddrErrorsread-onlycurrentip InAddrErrors
1.3.6.1.4.1.20301.2.7.18.3.2.16.5ScalaripStatsInUnknownProtosread-onlycurrentip InUnknownProtos
1.3.6.1.4.1.20301.2.7.18.3.2.16.6ScalaripStatsInDiscardsread-onlycurrentip InDiscards
1.3.6.1.4.1.20301.2.7.18.3.2.16.7ScalaripStatsInDeliversread-onlycurrentip InDelivers
1.3.6.1.4.1.20301.2.7.18.3.2.16.8ScalaripStatsOutRequestsread-onlycurrentip OutRequests
1.3.6.1.4.1.20301.2.7.18.3.2.16.9ScalaripStatsOutDiscardsread-onlycurrentip OutDiscards
1.3.6.1.4.1.20301.2.7.18.3.2.16.19ScalaripStatsDefaultTTLread-onlycurrentip DefaultTTL
1.3.6.1.4.1.20301.2.7.18.3.2.17NodeicmpStats
1.3.6.1.4.1.20301.2.7.18.3.2.17.1ScalaricmpStatsInMsgsread-onlycurrenticmp InMsgs
1.3.6.1.4.1.20301.2.7.18.3.2.17.2ScalaricmpStatsInErrorsread-onlycurrenticmp InErrors
1.3.6.1.4.1.20301.2.7.18.3.2.17.3ScalaricmpStatsInDestUnreachsread-onlycurrenticmp InDestUnreachs
1.3.6.1.4.1.20301.2.7.18.3.2.17.4ScalaricmpStatsInTimeExcdsread-onlycurrenticmp InTimeExcds
1.3.6.1.4.1.20301.2.7.18.3.2.17.5ScalaricmpStatsInParmProbsread-onlycurrenticmp InParmProbs
1.3.6.1.4.1.20301.2.7.18.3.2.17.6ScalaricmpStatsInSrcQuenchsread-onlycurrenticmp InSrcQuenchs
1.3.6.1.4.1.20301.2.7.18.3.2.17.7ScalaricmpStatsInRedirectsread-onlycurrenticmp InRedirects
1.3.6.1.4.1.20301.2.7.18.3.2.17.8ScalaricmpStatsInEchosread-onlycurrenticmp InEchos
1.3.6.1.4.1.20301.2.7.18.3.2.17.9ScalaricmpStatsInEchoRepsread-onlycurrenticmp InEchoReps
1.3.6.1.4.1.20301.2.7.18.3.2.17.10ScalaricmpStatsInTimestampsread-onlycurrenticmp InTimestamps
1.3.6.1.4.1.20301.2.7.18.3.2.17.11ScalaricmpStatsInTimestampRepsread-onlycurrenticmp InTimestampReps
1.3.6.1.4.1.20301.2.7.18.3.2.17.12ScalaricmpStatsInAddrMasksread-onlycurrenticmp InAddrMasks
1.3.6.1.4.1.20301.2.7.18.3.2.17.13ScalaricmpStatsInAddrMaskRepsread-onlycurrenticmp InAddrMaskReps
1.3.6.1.4.1.20301.2.7.18.3.2.17.14ScalaricmpStatsOutMsgsread-onlycurrenticmp OutMsgs
1.3.6.1.4.1.20301.2.7.18.3.2.17.15ScalaricmpStatsOutErrorsread-onlycurrenticmp OutErrors
1.3.6.1.4.1.20301.2.7.18.3.2.17.16ScalaricmpStatsOutDestUnreachsread-onlycurrenticmp OutDestUnreachs
1.3.6.1.4.1.20301.2.7.18.3.2.17.17ScalaricmpStatsOutTimeExcdsread-onlycurrenticmp OutTimeExcds
1.3.6.1.4.1.20301.2.7.18.3.2.17.18ScalaricmpStatsOutParmProbsread-onlycurrenticmp OutParmProbs
1.3.6.1.4.1.20301.2.7.18.3.2.17.19ScalaricmpStatsOutSrcQuenchsread-onlycurrenticmp OutSrcQuenchs
1.3.6.1.4.1.20301.2.7.18.3.2.17.20ScalaricmpStatsOutRedirectsread-onlycurrenticmp OutRedirects
1.3.6.1.4.1.20301.2.7.18.3.2.17.21ScalaricmpStatsOutEchosread-onlycurrenticmp OutEchos
1.3.6.1.4.1.20301.2.7.18.3.2.17.22ScalaricmpStatsOutEchoRepsread-onlycurrenticmp OutEchoReps
1.3.6.1.4.1.20301.2.7.18.3.2.17.23ScalaricmpStatsOutTimestampsread-onlycurrenticmp OutTimestamps
1.3.6.1.4.1.20301.2.7.18.3.2.17.24ScalaricmpStatsOutTimestampRepsread-onlycurrenticmp OutTimestampReps
1.3.6.1.4.1.20301.2.7.18.3.2.17.25ScalaricmpStatsOutAddrMasksread-onlycurrenticmp OutAddrMasks
1.3.6.1.4.1.20301.2.7.18.3.2.17.26ScalaricmpStatsOutAddrMaskRepsread-onlycurrenticmp OutAddrMaskReps
1.3.6.1.4.1.20301.2.7.18.3.2.18NodetcpStats
1.3.6.1.4.1.20301.2.7.18.3.2.18.1ScalartcpStatsRtoAlgorithmread-onlycurrenttcp RtoAlgorithm
1.3.6.1.4.1.20301.2.7.18.3.2.18.2ScalartcpStatsRtoMinread-onlycurrenttcp RtoMin
1.3.6.1.4.1.20301.2.7.18.3.2.18.3ScalartcpStatsRtoMaxread-onlycurrenttcp RtoMax
1.3.6.1.4.1.20301.2.7.18.3.2.18.4ScalartcpStatsMaxConnread-onlycurrenttcp MaxConn
1.3.6.1.4.1.20301.2.7.18.3.2.18.5ScalartcpStatsActiveOpensread-onlycurrenttcp ActiveOpens
1.3.6.1.4.1.20301.2.7.18.3.2.18.6ScalartcpStatsPassiveOpensread-onlycurrenttcp PassiveOpens
1.3.6.1.4.1.20301.2.7.18.3.2.18.7ScalartcpStatsAttemptFailsread-onlycurrenttcp AttemptFails
1.3.6.1.4.1.20301.2.7.18.3.2.18.8ScalartcpStatsEstabResetsread-onlycurrenttcp EstabResets
1.3.6.1.4.1.20301.2.7.18.3.2.18.9ScalartcpStatsInSegsread-onlycurrenttcp InSegs
1.3.6.1.4.1.20301.2.7.18.3.2.18.10ScalartcpStatsOutSegsread-onlycurrenttcp OutSegs
1.3.6.1.4.1.20301.2.7.18.3.2.18.11ScalartcpStatsRetransSegsread-onlycurrenttcp RetransSegs
1.3.6.1.4.1.20301.2.7.18.3.2.18.12ScalartcpStatsInErrsread-onlycurrenttcp InErrs
1.3.6.1.4.1.20301.2.7.18.3.2.18.13ScalartcpStatsCurrEstabread-onlycurrenttcp CurrEstab
1.3.6.1.4.1.20301.2.7.18.3.2.18.14ScalartcpStatsCurrConnread-onlycurrenttcp CurrConn
1.3.6.1.4.1.20301.2.7.18.3.2.18.15ScalartcpStatsOutRstsread-onlycurrenttcp OutRsts
1.3.6.1.4.1.20301.2.7.18.3.2.19NodeudpStats
1.3.6.1.4.1.20301.2.7.18.3.2.19.1ScalarudpStatsInDatagramsread-onlycurrentudp InDatagrams
1.3.6.1.4.1.20301.2.7.18.3.2.19.2ScalarudpStatsOutDatagramsread-onlycurrentudp OutDatagrams
1.3.6.1.4.1.20301.2.7.18.3.2.19.3ScalarudpStatsInErrorsread-onlycurrentudp InErrors
1.3.6.1.4.1.20301.2.7.18.3.2.19.4ScalarudpStatsNoPortsread-onlycurrentudp NoPorts
1.3.6.1.4.1.20301.2.7.18.3.3Nodelayer3Info
1.3.6.1.4.1.20301.2.7.18.3.3.1NodeipRoutingInfo
1.3.6.1.4.1.20301.2.7.18.3.3.1.1TableipDataRouteInfoTablenot-accessiblecurrentThe table of run-time IP routes.
1.3.6.1.4.1.20301.2.7.18.3.3.1.1.1RowipDataRouteInfoEntrynot-accessiblecurrentA row in the run-time IP route table
1.3.6.1.4.1.20301.2.7.18.3.3.1.1.1.1ColumnipDataRouteInfoIndxread-onlycurrentThe index of this route table.
1.3.6.1.4.1.20301.2.7.18.3.3.1.1.1.2ColumnipDataRouteInfoDestIpread-onlycurrentThe destination IP address of this route.
1.3.6.1.4.1.20301.2.7.18.3.3.1.1.1.3ColumnipDataRouteInfoMaskread-onlycurrentThe destination IP mask of this route.
1.3.6.1.4.1.20301.2.7.18.3.3.1.1.1.4ColumnipDataRouteInfoGatewayread-onlycurrentThe next-hop router address for this route.
1.3.6.1.4.1.20301.2.7.18.3.3.1.1.1.5ColumnipDataRouteInfoTagread-onlycurrentThe tag-type for this route.
1.3.6.1.4.1.20301.2.7.18.3.3.1.1.1.6ColumnipDataRouteInfoTyperead-onlycurrentThe type of the route.
1.3.6.1.4.1.20301.2.7.18.3.3.1.1.1.7ColumnipDataRouteInfoInterfaceread-onlycurrentThe interface number for which the destination address is applicable. Loopback interfaces are numbered starting with maximum allowed IP interfaces +1.
1.3.6.1.4.1.20301.2.7.18.3.3.1.1.1.8ColumnipDataRouteInfoGateway1read-onlycurrentThe next-hop router address for this route.
1.3.6.1.4.1.20301.2.7.18.3.3.1.1.1.9ColumnipDataRouteInfoGateway2read-onlycurrentThe next-hop router address for this route.
1.3.6.1.4.1.20301.2.7.18.3.3.1.1.1.10ColumnipDataRouteInfoMetricread-onlycurrentThe Metric for this route.
1.3.6.1.4.1.20301.2.7.18.3.3.1.2ScalarrouteTableClearread-writecurrentSetting this value to clear(2) clears the route table.
1.3.6.1.4.1.20301.2.7.18.3.3.1.3TableipMgmtRouteInfoTablenot-accessiblecurrentThe table of run-time IP routes.
1.3.6.1.4.1.20301.2.7.18.3.3.1.3.1RowipMgmtRouteInfoEntrynot-accessiblecurrentA row in the run-time IP route table
1.3.6.1.4.1.20301.2.7.18.3.3.1.3.1.1ColumnipMgmtRouteInfoIndxread-onlycurrentThe index of this route table.
1.3.6.1.4.1.20301.2.7.18.3.3.1.3.1.2ColumnipMgmtRouteInfoDestIpread-onlycurrentThe destination IP address of this route.
1.3.6.1.4.1.20301.2.7.18.3.3.1.3.1.3ColumnipMgmtRouteInfoMaskread-onlycurrentThe destination IP mask of this route.
1.3.6.1.4.1.20301.2.7.18.3.3.1.3.1.4ColumnipMgmtRouteInfoGatewayread-onlycurrentThe next-hop router address for this route.
1.3.6.1.4.1.20301.2.7.18.3.3.1.3.1.5ColumnipMgmtRouteInfoTagread-onlycurrentThe tag-type for this route.
1.3.6.1.4.1.20301.2.7.18.3.3.1.3.1.6ColumnipMgmtRouteInfoTyperead-onlycurrentThe type of the route.
1.3.6.1.4.1.20301.2.7.18.3.3.1.3.1.7ColumnipMgmtRouteInfoInterfaceread-onlycurrentThe interface number for which the destination address is applicable.
1.3.6.1.4.1.20301.2.7.18.3.3.1.3.1.8ColumnipMgmtRouteInfoGateway1read-onlycurrentThe next-hop router address for this route.
1.3.6.1.4.1.20301.2.7.18.3.3.1.3.1.9ColumnipMgmtRouteInfoGateway2read-onlycurrentThe next-hop router address for this route.
1.3.6.1.4.1.20301.2.7.18.3.3.1.3.1.10ColumnipMgmtRouteInfoMetricread-onlycurrentThe Metric for this route.
1.3.6.1.4.1.20301.2.7.18.3.3.2NodearpInfo
1.3.6.1.4.1.20301.2.7.18.3.3.2.1TablearpInfoTablenot-accessiblecurrentThe table of ARP entries.
1.3.6.1.4.1.20301.2.7.18.3.3.2.1.1RowarpInfoEntrynot-accessiblecurrentA row in the ARP table
1.3.6.1.4.1.20301.2.7.18.3.3.2.1.1.1ColumnarpInfoDestIpread-onlycurrentThe destination IP address of the ARP entry.
1.3.6.1.4.1.20301.2.7.18.3.3.2.1.1.2ColumnarpInfoMacAddrread-onlycurrentThe MAC address for the ARP entry.
1.3.6.1.4.1.20301.2.7.18.3.3.2.1.1.3ColumnarpInfoVLANread-onlycurrentThe VLAN identifier for the ARP entry.
1.3.6.1.4.1.20301.2.7.18.3.3.2.1.1.4ColumnarpInfoSrcPortIndexread-onlycurrentThe port number on which this entry's equivalence is effective.
1.3.6.1.4.1.20301.2.7.18.3.3.2.1.1.6ColumnarpInfoFlagread-onlycurrentThe flag associated with this ARP entry.
1.3.6.1.4.1.20301.2.7.18.3.3.2.1.1.8ColumnarpInfoSrcPortAliasread-onlycurrentAlias for port number.
1.3.6.1.4.1.20301.2.7.18.3.3.2.2ScalararpCacheClearread-writecurrentSetting this value to clear(2) clears the ARP cache.
1.3.6.1.4.1.20301.2.7.18.3.3.2.3TablearpMgmtInfoTablenot-accessiblecurrentThe table of Mgmt ARP entries.
1.3.6.1.4.1.20301.2.7.18.3.3.2.3.1RowarpMgmtInfoEntrynot-accessiblecurrentA row in the ARP table
1.3.6.1.4.1.20301.2.7.18.3.3.2.3.1.1ColumnarpMgmtInfoDestIpread-onlycurrentThe destination IP address of the ARP entry.
1.3.6.1.4.1.20301.2.7.18.3.3.2.3.1.2ColumnarpMgmtInfoMacAddrread-onlycurrentThe MAC address for the ARP entry.
1.3.6.1.4.1.20301.2.7.18.3.3.2.3.1.3ColumnarpMgmtInfoVLANread-onlycurrentThe VLAN identifier for the ARP entry.
1.3.6.1.4.1.20301.2.7.18.3.3.2.3.1.4ColumnarpMgmtInfoSrcPortIndexread-onlycurrentThe port number on which this entry's equivalence is effective.
1.3.6.1.4.1.20301.2.7.18.3.3.2.3.1.5ColumnarpMgmtInfoFlagread-onlycurrentThe flag associated with this ARP entry.
1.3.6.1.4.1.20301.2.7.18.3.3.2.3.1.6ColumnarpMgmtInfoSrcPortAliasread-onlycurrentAlias for port number.
1.3.6.1.4.1.20301.2.7.18.3.3.5NodegatewayInfo
1.3.6.1.4.1.20301.2.7.18.3.3.5.1TablegatewayInfoTablenot-accessiblecurrentThe table containing information for the default gateways.
1.3.6.1.4.1.20301.2.7.18.3.3.5.1.1RowgatewayInfoEntrynot-accessiblecurrentA row in the gateway information table
1.3.6.1.4.1.20301.2.7.18.3.3.5.1.1.1ColumngatewayInfoIndexread-onlycurrentThe gateway number for which the information is related.
1.3.6.1.4.1.20301.2.7.18.3.3.5.1.1.2ColumngatewayInfoAddrread-onlycurrentThe IP address of the default gateway.
1.3.6.1.4.1.20301.2.7.18.3.3.5.1.1.4ColumngatewayInfoStatusread-onlycurrentThe status of the default gateway.
1.3.6.1.4.1.20301.2.7.18.3.3.6NodeigmpInfo
1.3.6.1.4.1.20301.2.7.18.3.3.6.1TableigmpInfoTablenot-accessiblecurrentThe table of IGMP group membership information.
1.3.6.1.4.1.20301.2.7.18.3.3.6.1.1RowigmpInfoEntrynot-accessiblecurrentInformation about an IGMP group member .
1.3.6.1.4.1.20301.2.7.18.3.3.6.1.1.1ColumnigmpInfoIndexread-onlycurrentThe igmp group number for which the IGMP info table is related.
1.3.6.1.4.1.20301.2.7.18.3.3.6.1.1.2ColumnigmpInfoGroupIdread-onlycurrentThe IP address of the IGMP group.
1.3.6.1.4.1.20301.2.7.18.3.3.6.1.1.3ColumnigmpInfoVlanIdread-onlycurrentThe VLAN ID for this IGMP group.
1.3.6.1.4.1.20301.2.7.18.3.3.6.1.1.4ColumnigmpInfoSrcTrunkread-onlycurrentThe downstream trunk number.
1.3.6.1.4.1.20301.2.7.18.3.3.6.1.1.5ColumnigmpInfoSrcPortIndexread-onlycurrentThe downstream port number.
1.3.6.1.4.1.20301.2.7.18.3.3.6.1.1.6ColumnigmpInfoVersionread-onlycurrentThe Version of IGMP host.
1.3.6.1.4.1.20301.2.7.18.3.3.6.1.1.7ColumnigmpInfoExpiresread-onlycurrentThe expiration time for this host.
1.3.6.1.4.1.20301.2.7.18.3.3.6.1.1.8ColumnigmpInfoModeread-onlycurrentThe IGMPv3 filter-mode for this host. Returned values: exclude(1) - the IGMPv3 filter-mode is exclude. include(2) - the IGMPv3 filter-mode is include. na(3) - …
1.3.6.1.4.1.20301.2.7.18.3.3.6.1.1.9ColumnigmpInfoSourceIpread-onlycurrentThe source IP address of the IGMP group.
1.3.6.1.4.1.20301.2.7.18.3.3.6.1.1.10ColumnigmpInfoFwdread-onlycurrentThe IGMPv3 forwarding for this source/group IP for this host.
1.3.6.1.4.1.20301.2.7.18.3.3.6.1.1.11ColumnigmpInfoGrpExpiresread-onlycurrentThe expiration time for the group.
1.3.6.1.4.1.20301.2.7.18.3.3.6.1.1.12ColumnigmpInfoSrcPortAliasread-onlycurrentThe downstream port alias.
1.3.6.1.4.1.20301.2.7.18.3.3.6.2TableigmpMrtrInfoTablenot-accessiblecurrentThe table of IGMP mrouters.
1.3.6.1.4.1.20301.2.7.18.3.3.6.2.1RowigmpMrtrInfoEntrynot-accessiblecurrentInformation about an IGMP mrouter.
1.3.6.1.4.1.20301.2.7.18.3.3.6.2.1.1ColumnigmpMrtrInfoIndexread-onlycurrentThe mrouter number for which the IGMP mrouter info table is related.
1.3.6.1.4.1.20301.2.7.18.3.3.6.2.1.2ColumnigmpMrtrInfoVlanIdread-onlycurrentThe VLAN ID on which this IGMP mrouter is attached.
1.3.6.1.4.1.20301.2.7.18.3.3.6.2.1.3ColumnigmpMrtrInfoPortIdread-onlycurrentThe port/portchannel alias on which this IGMP mrouter is attached.
1.3.6.1.4.1.20301.2.7.18.3.3.6.2.1.4ColumnigmpMrtrInfoVersionread-onlycurrentThe version of this IGMP mrouter.
1.3.6.1.4.1.20301.2.7.18.3.3.6.2.1.5ColumnigmpMrtrInfoExpiresread-onlycurrentThe expiration time for this mrouter.
1.3.6.1.4.1.20301.2.7.18.3.3.6.2.1.6ColumnigmpMrtrInfoMrtread-onlycurrentThe Maximum Query Response time of this IGMP mrouter.
1.3.6.1.4.1.20301.2.7.18.3.3.6.2.1.7ColumnigmpMrtrInfoQrvread-onlycurrentThe Querier Robustness value of this IGMP mrouter.
1.3.6.1.4.1.20301.2.7.18.3.3.6.2.1.8ColumnigmpMrtrInfoQqicread-onlycurrentThe Querier query interval code of this IGMP mrouter.
1.3.6.1.4.1.20301.2.7.18.3.3.6.2.1.10ColumnigmpMrtrInfoSrcIpread-onlycurrentThe Source IP of this IGMP mrouter.
1.3.6.1.4.1.20301.2.7.18.3.3.6.2.1.11ColumnigmpMrtrInfoPortAliasread-onlycurrentThe port/portchannel alias on which this IGMP mrouter is attached.
1.3.6.1.4.1.20301.2.7.18.3.3.6.3ScalarigmpClearTablesread-writecurrentClear the IGMP tables. When setting clearGroups(1), the dynamic groups are removed, when setting clearMrouters(2), the mrouter tables are removed and when sett…
1.3.6.1.4.1.20301.2.7.18.3.3.9NodeipIntfInfo
1.3.6.1.4.1.20301.2.7.18.3.3.9.1TableipIntfInfoTablenot-accessiblecurrentThe table of IP interface information.
1.3.6.1.4.1.20301.2.7.18.3.3.9.1.1RowintfInfoEntrynot-accessiblecurrentA row in IP interface information table.
1.3.6.1.4.1.20301.2.7.18.3.3.9.1.1.1ColumnintfInfoIndexread-onlycurrentThe interface number for which the information is related.
1.3.6.1.4.1.20301.2.7.18.3.3.9.1.1.3ColumnintfInfoAddrread-onlycurrentThe IP address of the interface.
1.3.6.1.4.1.20301.2.7.18.3.3.9.1.1.4ColumnintfInfoNetMaskread-onlycurrentThe subnet mask of the interface.
1.3.6.1.4.1.20301.2.7.18.3.3.9.1.1.5ColumnintfInfoBcastAddrread-onlycurrentThe broadcast address of the interface.
1.3.6.1.4.1.20301.2.7.18.3.3.9.1.1.6ColumnintfInfoVlanread-onlycurrentThe VLAN number for this interface.
1.3.6.1.4.1.20301.2.7.18.3.3.9.1.1.7ColumnintfInfoStatusread-onlycurrentThe status of the interface.
1.3.6.1.4.1.20301.2.7.18.3.3.13NodegatewayIPv6Info
1.3.6.1.4.1.20301.2.7.18.3.3.13.1TablegatewayIPv6InfoTablenot-accessiblecurrentThe table containing information for the IPv6 default gateways.
1.3.6.1.4.1.20301.2.7.18.3.3.13.1.1RowgatewayIPv6InfoEntrynot-accessiblecurrentA row in the IPv6 gateway information table
1.3.6.1.4.1.20301.2.7.18.3.3.13.1.1.1ColumnipGatewayIPv6InfoIndexread-onlycurrentThe IPv6 gateway number for which the information is related.
1.3.6.1.4.1.20301.2.7.18.3.3.13.1.1.2ColumnipGatewayIPv6InfoAddrread-onlycurrentThe IP address for the IPv6 default gateway.
1.3.6.1.4.1.20301.2.7.18.3.3.13.1.1.3ColumnipGatewayIPv6InfoStateread-onlycurrentThe state for the IPv6 Default Gateway.
1.3.6.1.4.1.20301.2.7.18.3.3.15NodedhcpInfo
1.3.6.1.4.1.20301.2.7.18.3.3.15.1ScalardhcpInfoMacAddrread-onlycurrentThe MAC address of the interface.
1.3.6.1.4.1.20301.2.7.18.3.3.15.2ScalardhcpInfoAddrread-onlycurrentThe IP address of the interface.
1.3.6.1.4.1.20301.2.7.18.3.3.15.3ScalardhcpInfoSubnetMaskread-onlycurrentThe subnet mask of the interface.
1.3.6.1.4.1.20301.2.7.18.3.3.15.4ScalardhcpInfoDefaultGatewayread-onlycurrentThe IP address of default gateway for the interface.
1.3.6.1.4.1.20301.2.7.18.3.3.15.5ScalardhcpInfoServerread-onlycurrentThe IP address of the DHCP server that leased the ip of the interface.
1.3.6.1.4.1.20301.2.7.18.3.3.15.6ScalardhcpInfoLeaseObtainedread-onlycurrentThe time and date when the lease was obtained .
1.3.6.1.4.1.20301.2.7.18.3.3.15.7ScalardhcpInfoLeaseExpiresread-onlycurrentThe time and date when the lease was obtained .
1.3.6.1.4.1.20301.2.7.18.3.3.19NodeipEcmpRoutingInfo
1.3.6.1.4.1.20301.2.7.18.3.3.19.1TableipRouteEcmpInfoTablenot-accessiblecurrentThe table of run-time IP routes.
1.3.6.1.4.1.20301.2.7.18.3.3.19.1.1RowipRouteEcmpInfoEntrynot-accessiblecurrentA row in the run-time IP route table
1.3.6.1.4.1.20301.2.7.18.3.3.19.1.1.1ColumnipRouteEcmpInfoDestIndxread-onlycurrentThe index of unique destinations IP.
1.3.6.1.4.1.20301.2.7.18.3.3.19.1.1.2ColumnipRouteEcmpInfoGwIndxread-onlycurrentThe index of the gateway per destination.
1.3.6.1.4.1.20301.2.7.18.3.3.19.1.1.3ColumnipRouteEcmpInfoDestread-onlycurrentThe destination IP of this route.
1.3.6.1.4.1.20301.2.7.18.3.3.19.1.1.4ColumnipRouteEcmpInfoMaskread-onlycurrentThe destination IP mask of this route.
1.3.6.1.4.1.20301.2.7.18.3.3.19.1.1.5ColumnipRouteEcmpInfoGatewayread-onlycurrentThe next-hop router address for this route.
1.3.6.1.4.1.20301.2.7.18.3.3.19.1.1.6ColumnipRouteEcmpInfoInterfaceread-onlycurrentThe interface for the next-hop.
1.3.6.1.4.1.20301.2.7.18.3.3.19.1.1.7ColumnipRouteEcmpInfoGwStatusread-onlycurrentThe Up/Down status of the gateway
1.3.6.1.4.1.20301.2.7.18.3.3.20NodeipEcmpHash
1.3.6.1.4.1.20301.2.7.18.3.3.20.1ScalaripEcmpHashSIPAddrread-writecurrentThe SIP Address.
1.3.6.1.4.1.20301.2.7.18.3.3.20.2ScalaripEcmpHashDIPAddrread-writecurrentThe DIP Address (enter 0 for SIP only).
1.3.6.1.4.1.20301.2.7.18.3.3.20.3ScalaripEcmpHashNumberPathsread-writecurrentThe number of ECMP paths.
1.3.6.1.4.1.20301.2.7.18.3.3.20.4ScalaripEcmpHashRouteNumberread-onlycurrentThe result of the hash algorithm. For this to work the values for ipEcmpHashSIPAddr, ipEcmpHashDIPAddr, ipEcmpHashNumberPaths must be set. If the result is 0 i…
1.3.6.1.4.1.20301.2.7.18.7Nodetraps
1.3.6.1.4.1.20301.2.7.18.7.0NodeibmSNMPv2Notifications
1.3.6.1.4.1.20301.2.7.18.7.2NodeswDefGwUpA swDefGwUp trap signifies that the default gateway is alive. ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable. The range for ipCurCfgGwIndex is …
1.3.6.1.4.1.20301.2.7.18.7.3NodeswDefGwDownA swDefGwDown trap signifies that the default gateway is down. ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable. The range for ipCurCfgGwIndex is…
1.3.6.1.4.1.20301.2.7.18.7.4NodeswDefGwInServiceA swDefGwInService trap signifies that the default gateway is up and in service. ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable. The range for …
1.3.6.1.4.1.20301.2.7.18.7.5NodeswDefGwNotInServiceA swDefGwNotInService trap signifies that the default gateway is alive but not in service. ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable. The …
1.3.6.1.4.1.20301.2.7.18.7.19NodeswLoginFailureA swLoginFailure trap signifies that someone failed to enter a valid username/password combination. swTrapDisplayString specifies whether the login attempt was…
1.3.6.1.4.1.20301.2.7.18.7.22NodeswTempExceedThresholdA swTempExceedThreshold trap signifies that the switch temperature has exceeded maximum safety limits.
1.3.6.1.4.1.20301.2.7.18.7.25NodeswValidLoginA swValidLogin trap signifies that a user login has occured.
1.3.6.1.4.1.20301.2.7.18.7.27NodeswApplyCompleteA swApplyComplete signifies that new configuration has been applied.
1.3.6.1.4.1.20301.2.7.18.7.28NodeswSaveCompleteA swApplyComplete signifies that new configuration has been saved.
1.3.6.1.4.1.20301.2.7.18.7.29NodeswFwDownloadSucessA swFwDownloadSuccess signifies that firmware has been downloaded to [image1|image2|boot image].
1.3.6.1.4.1.20301.2.7.18.7.30NodeswFwDownloadFailureA swFwDownloadFailure signifies that firmware downloaded failed to [image1|image2|boot image].
1.3.6.1.4.1.20301.2.7.18.7.31NodeswTempReturnThresholdA swTempReturnThreshold trap signifies that the switch temperature has returned below maximum safety limits.
1.3.6.1.4.1.20301.2.7.18.7.42NodeswStgNewRootA swStgNewRoot trap signifies that the bridge has become the new root of the STG.
1.3.6.1.4.1.20301.2.7.18.7.43NodeswCistNewRootA swCistNewRoot trap signifies that the bridge has become the new root of the CIST.
1.3.6.1.4.1.20301.2.7.18.7.44NodeswStgTopologyChangedA swStgTopologyChanged trap signifies that there was a STG topology change.
1.3.6.1.4.1.20301.2.7.18.7.45NodeswCistTopologyChangedA swCistTopologyChanged trap signifies that there was a CIST topology change.
1.3.6.1.4.1.20301.2.7.18.7.46NodeswHotlinksMasterUpA swHotlinksMasterUp trap signifies that the Master interface is active.
1.3.6.1.4.1.20301.2.7.18.7.47NodeswHotlinksMasterDnA swHotlinksMasterDn trap signifies that the Master interface is not active.
1.3.6.1.4.1.20301.2.7.18.7.48NodeswHotlinksBackupUpA swHotlinksBackupUp trap signifies that the Backup interface is active.
1.3.6.1.4.1.20301.2.7.18.7.49NodeswHotlinksBackupDnA swHotlinksBackupDn trap signifies that the Backup interface is not active.
1.3.6.1.4.1.20301.2.7.18.7.50NodeswHotlinksNoneA swHotlinksNone trap signifies that there are no active interfaces.
1.3.6.1.4.1.20301.2.7.18.7.51NodesfpInsertedA sfpInserted trap signifies that a SFP is inserted.
1.3.6.1.4.1.20301.2.7.18.7.52NodesfpRemovedA sfpRemoved trap signifies that a SFP is removed.
1.3.6.1.4.1.20301.2.7.18.7.61NodeswNTPSyncFailedA swNTPSyncFailed trap signifies that sync with NTP server failed.
1.3.6.1.4.1.20301.2.7.18.7.62NodeswNTPUpdateClockA swNTPUpdateClock trap signifies that update system clock with NTP server.
1.3.6.1.4.1.20301.2.7.18.7.63NodeswValidLogoutA swValidLogout trap signifies that a user logout has occured.
1.3.6.1.4.1.20301.2.7.18.7.65NodeswECMPGatewayUpA swECMPGatewayUp trap signifies that the ECMP gateway is up.
1.3.6.1.4.1.20301.2.7.18.7.66NodeswECMPGatewayDownA swECMPGatewayDown trap signifies that the ECMP gateway is down.
1.3.6.1.4.1.20301.2.7.18.7.67NodeswTeamingCtrlUpA swTeamingCtrlUp trap signifies that the teaming is up.
1.3.6.1.4.1.20301.2.7.18.7.68NodeswTeamingCtrlDownA swTeamingCtrlDown trap signifies that the teaming control is down.
1.3.6.1.4.1.20301.2.7.18.7.69NodeswTeamingCtrlDownTearDownBlkedA swTeamingCtrlDownTearDownBlked trap signifies that the teaming control is down but teardown is blocked.
1.3.6.1.4.1.20301.2.7.18.7.70NodeswTeamingCtrlErrorA swTeamingCtrlError trap signifies error, action is undefined.
1.3.6.1.4.1.20301.2.7.18.7.71NodeswLACPPortBlockedA swLACPPortBlocked trap signifies that LACP is operationally down on a port, and traffic is blocked on the port.
1.3.6.1.4.1.20301.2.7.18.7.72NodeswLACPPortUnblockedA swLACPPortUnblocked trap signifies that LACP is operationally up on a port, and traffic is no longer blocked on the port.
1.3.6.1.4.1.20301.2.7.18.7.103NodeswLFDPortErrdisabledAn swLFDPortErrdisabled trap signifies that a port is error-disabled due to excessive link flaps.
1.3.6.1.4.1.20301.2.7.18.7.106NodeswVlagInstanceUpA swVlagInstanceUp trap signifies that vLAG instance is up identified in the trap message.
1.3.6.1.4.1.20301.2.7.18.7.107NodeswVlagInstanceRemoteUpA swVlagInstanceRemoteUp trap signifies that vLAG is down but remote instance is Up.
1.3.6.1.4.1.20301.2.7.18.7.108NodeswVlagInstanceLocalUpA swVlagInstanceLocalUp trap signifies that vLAG is down but local instance is Up.
1.3.6.1.4.1.20301.2.7.18.7.109NodeswVlagInstanceDownA swVlagInstanceDown trap signifies that vLAG instance is down identified in the trap message.
1.3.6.1.4.1.20301.2.7.18.7.110NodeswVlagIslUpA swVlagIslUp trap signifies that connection between vLAG switches is up.
1.3.6.1.4.1.20301.2.7.18.7.111NodeswVlagIslDownA swVlagInstanceDown trap signifies that connection between vLAG switches is down.
1.3.6.1.4.1.20301.2.7.18.7.158Nodesw8021xA sw8021x trap is sent when dot1x feature is enabled.
1.3.6.1.4.1.20301.2.7.18.7.162NodeswDefAdminDisableA swDefAdminDisable trap signifies that default admin account has been disabled.
1.3.6.1.4.1.20301.2.7.18.7.163NodeswAcntStrngPswdNotMetA swAcntStrngPswdNotMet trap signifies that configured password does not match strong password complexity.
1.3.6.1.4.1.20301.2.7.18.7.164NodeswAcntLockedA swAcntLocked trap signifies that account has been locked.
1.3.6.1.4.1.20301.2.7.18.7.165NodeswAcntUnlockedA swAcntUnlocked trap signifies that account has been unlocked.
1.3.6.1.4.1.20301.2.7.18.7.184NodeswARPtablefullA swARPtablefull trap signifies that ARP table is full.
1.3.6.1.4.1.20301.2.7.18.7.1000ScalarswTrapDisplayStringread-onlycurrentTemporary string object used to store information being sent in a Switch trap.
1.3.6.1.4.1.20301.2.7.18.8Nodeqos
1.3.6.1.4.1.20301.2.7.18.8.1NodeqosConfig
1.3.6.1.4.1.20301.2.7.18.8.1.1Nodeqos8021p
1.3.6.1.4.1.20301.2.7.18.8.1.1.1TableqosCurCfgPortPriorityTablenot-accessiblecurrentThe table of QOS Port Priority configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.1.1.1RowqosCurCfgPortPriorityEntrynot-accessiblecurrentInformation about a particular QOS Port Priority configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.1.1.1.1ColumnqosCurCfgPortIndexread-onlycurrentSwitch Port Number
1.3.6.1.4.1.20301.2.7.18.8.1.1.1.1.2ColumnqosCurCfgPortPriorityread-onlycurrentSwitch Port Priority Should be between 0 and 7
1.3.6.1.4.1.20301.2.7.18.8.1.1.1.1.3ColumnqosCurCfgPortAliasread-onlycurrentSwitch Port Alias
1.3.6.1.4.1.20301.2.7.18.8.1.1.2TableqosNewCfgPortPriorityTablenot-accessiblecurrentThe table of QOS Port Priority configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.1.2.1RowqosNewCfgPortPriorityEntrynot-accessiblecurrentInformation about a particular QOS Port Priority configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.1.2.1.1ColumnqosNewCfgPortIndexread-onlycurrentSwitch Port Number
1.3.6.1.4.1.20301.2.7.18.8.1.1.2.1.2ColumnqosNewCfgPortPriorityread-writecurrentSwitch Port Priority Should be between 0 and 7
1.3.6.1.4.1.20301.2.7.18.8.1.1.2.1.3ColumnqosNewCfgPortAliasread-onlycurrentSwitch Port Alias
1.3.6.1.4.1.20301.2.7.18.8.1.1.3TableqosCurCfgPriorityCoSTablenot-accessiblecurrentThe table of Frame Priority and COSq configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.1.3.1RowqosCurCfgPriorityCoSEntrynot-accessiblecurrentInformation about a particular Frame Priority and COSq configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.1.3.1.1ColumnqosCurCfgPriorityIndexread-onlycurrentFrame priority Number
1.3.6.1.4.1.20301.2.7.18.8.1.1.3.1.2ColumnqosCurCfgPriorityCoSqread-onlycurrentCoSq for a Frame Priority Should be between 0 and 7
1.3.6.1.4.1.20301.2.7.18.8.1.1.4TableqosNewCfgPriorityCoSTablenot-accessiblecurrentThe table of Frame Priority and COSq configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.1.4.1RowqosNewCfgPriorityCoSEntrynot-accessiblecurrentInformation about a particular Frame Priority and COSq configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.1.4.1.1ColumnqosNewCfgPriorityIndexread-onlycurrentFrame priority Number
1.3.6.1.4.1.20301.2.7.18.8.1.1.4.1.2ColumnqosNewCfgPriorityCoSqread-writecurrentCoSq for a Frame Priority Should be between 0 and 7
1.3.6.1.4.1.20301.2.7.18.8.1.1.5TableqosCurCfgCosWeightTablenot-accessiblecurrentThe table of CoSq and Weight configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.1.5.1RowqosCurCfgCosWeightEntrynot-accessiblecurrentInformation about a particular CoSq and Weight configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.1.5.1.1ColumnqosCurCfgCosIndexread-onlycurrentCoSq Number
1.3.6.1.4.1.20301.2.7.18.8.1.1.5.1.2ColumnqosCurCfgCosWeightread-onlycurrentWeight of CoSq
1.3.6.1.4.1.20301.2.7.18.8.1.1.6TableqosNewCfgCosWeightTablenot-accessiblecurrentThe table of CoSq and Weight configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.1.6.1RowqosNewCfgCosWeightEntrynot-accessiblecurrentInformation about a particular CoSq and Weight configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.1.6.1.1ColumnqosNewCfgCosIndexread-onlycurrentCoSq Number
1.3.6.1.4.1.20301.2.7.18.8.1.1.6.1.2ColumnqosNewCfgCosWeightread-writecurrentWeight of CoSq
1.3.6.1.4.1.20301.2.7.18.8.1.1.7ScalarqosCurCfgCosNumread-onlycurrentNumber of CoSq.
1.3.6.1.4.1.20301.2.7.18.8.1.1.8ScalarqosNewCfgCosNumread-writecurrentNumber of CoSq.
1.3.6.1.4.1.20301.2.7.18.8.1.1.9ScalarqosDefaultCfgread-writecurrentThis is to set QoS configuration to default. none(0) is returned always when read. defaultCosNum(1): Sets COS queue number to default defaultWeight(2): Sets CO…
1.3.6.1.4.1.20301.2.7.18.8.1.2Nodeqosdscp
1.3.6.1.4.1.20301.2.7.18.8.1.2.1TableqosCurCfgDscpTablenot-accessiblecurrentThe table of Dscp to New Dscp/802.1p priority configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.2.1.1RowqosCurCfgDscpEntrynot-accessiblecurrentInformation about a particular Dscp to New Dscp/802.1p priority configuration
1.3.6.1.4.1.20301.2.7.18.8.1.2.1.1.1ColumnqosCurCfgDscpIndexread-onlycurrentDscp value
1.3.6.1.4.1.20301.2.7.18.8.1.2.1.1.2ColumnqosCurCfgMapDscpread-onlycurrentMap Dscp Value
1.3.6.1.4.1.20301.2.7.18.8.1.2.1.1.3ColumnqosCurCfgMap8021pread-onlycurrentMap 802.1p value
1.3.6.1.4.1.20301.2.7.18.8.1.2.2TableqosNewCfgDscpTablenot-accessiblecurrentThe table of Dscp to New Dscp/802.1p priority configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.2.2.1RowqosNewCfgDscpEntrynot-accessiblecurrentInformation about a particular Dscp to New Dscp/802.1p priority configuration
1.3.6.1.4.1.20301.2.7.18.8.1.2.2.1.1ColumnqosNewCfgDscpIndexread-onlycurrentDscp value
1.3.6.1.4.1.20301.2.7.18.8.1.2.2.1.2ColumnqosNewCfgMapDscpread-writecurrentMap Dscp Value
1.3.6.1.4.1.20301.2.7.18.8.1.2.2.1.3ColumnqosNewCfgMap8021pread-writecurrentMap 802.1p value
1.3.6.1.4.1.20301.2.7.18.8.1.2.3ScalarqosCurCfgDscpStateread-onlycurrentThis is for turning on/off DSCP globally.
1.3.6.1.4.1.20301.2.7.18.8.1.2.4ScalarqosNewCfgDscpStateread-writecurrentThis is for turning on/off DSCP globally.
1.3.6.1.4.1.20301.2.7.18.8.1.3Nodeqoswredecn
1.3.6.1.4.1.20301.2.7.18.8.1.3.1TableqosCurCfgPortProfileTablenot-accessiblecurrentThe table of QOS port WRED ECN profile configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.3.1.1RowqoSCurCfgPortProfileEntrynot-accessiblecurrentInformation about a particular Transmit queue of a port WRED ECN profile configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.3.1.1.1ColumnqosCurCfgProfilePortIndexread-onlycurrentSwitch Port Number
1.3.6.1.4.1.20301.2.7.18.8.1.3.1.1.2ColumnqosCurCfgTrqIndexread-onlycurrentTransmit Queue Number
1.3.6.1.4.1.20301.2.7.18.8.1.3.1.1.3ColumnqosCurCfgTrqNonTcpMinread-onlycurrentPort Transmit queue WRED ECN nontcp profile MinThreshold value.
1.3.6.1.4.1.20301.2.7.18.8.1.3.1.1.4ColumnqosCurCfgTrqNonTcpMaxread-onlycurrentPort Transmit queue WRED ECN nontcp profile MaxThreshold value
1.3.6.1.4.1.20301.2.7.18.8.1.3.1.1.5ColumnqosCurCfgTrqNonTcpRateread-onlycurrentPort Transmit queue WRED ECN nontcp profile DropRate value.
1.3.6.1.4.1.20301.2.7.18.8.1.3.1.1.6ColumnqosCurCfgTrqTcpMinread-onlycurrentPort Transmit queue WRED ECN tcp profile MinThreshold value.
1.3.6.1.4.1.20301.2.7.18.8.1.3.1.1.7ColumnqosCurCfgTrqTcpMaxread-onlycurrentPort Transmit queue WRED ECN tcp profile MaxThreshold value
1.3.6.1.4.1.20301.2.7.18.8.1.3.1.1.8ColumnqosCurCfgTrqTcpRateread-onlycurrentPort Transmit queue WRED ECN tcp profile DropRate value.
1.3.6.1.4.1.20301.2.7.18.8.1.3.1.1.9ColumnqosCurCfgPortTrqWredStateread-onlycurrentThis is for turning on/off WRED per transmit queue per port.
1.3.6.1.4.1.20301.2.7.18.8.1.3.1.1.10ColumnqosCurCfgProfilePortAliasread-onlycurrentThe port alias.
1.3.6.1.4.1.20301.2.7.18.8.1.3.2TableqosNewCfgPortProfileTablenot-accessiblecurrentThe table of QOS Port WRED ECN configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.3.2.1RowqoSNewCfgPortProfileEntrynot-accessiblecurrentInformation about a particular Transmit queue of a port WRED ECN configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.3.2.1.1ColumnqosNewCfgProfilePortIndexread-onlycurrentSwitch Port Number
1.3.6.1.4.1.20301.2.7.18.8.1.3.2.1.2ColumnqosNewCfgTrqIndexread-onlycurrentTransmit Queue Number
1.3.6.1.4.1.20301.2.7.18.8.1.3.2.1.3ColumnqosNewCfgTrqNonTcpMinread-writecurrentPort Transmit queue WRED ECN nontcp profile MinThreshold value.
1.3.6.1.4.1.20301.2.7.18.8.1.3.2.1.4ColumnqosNewCfgTrqNonTcpMaxread-writecurrentPort Transmit queue WRED ECN nontcp profile MaxThreshold value.
1.3.6.1.4.1.20301.2.7.18.8.1.3.2.1.5ColumnqosNewCfgTrqNonTcpRateread-writecurrentPort Transmit queue WRED ECN nontcp profile DropRate value.
1.3.6.1.4.1.20301.2.7.18.8.1.3.2.1.6ColumnqosNewCfgTrqTcpMinread-writecurrentPort Transmit queue WRED ECN tcp profile MinThreshold value.
1.3.6.1.4.1.20301.2.7.18.8.1.3.2.1.7ColumnqosNewCfgTrqTcpMaxread-writecurrentPort Transmit queue WRED ECN tcp profile MaxThreshold value.
1.3.6.1.4.1.20301.2.7.18.8.1.3.2.1.8ColumnqosNewCfgTrqTcpRateread-writecurrentPort Transmit queue WRED ECN tcp profile DropRate value.
1.3.6.1.4.1.20301.2.7.18.8.1.3.2.1.9ColumnqosNewCfgPortTrqWredStateread-writecurrentThis is for turning on/off WRED per transmit queue per port.
1.3.6.1.4.1.20301.2.7.18.8.1.3.2.1.10ColumnqosNewCfgProfilePortAliasread-onlycurrentThe port alias.
1.3.6.1.4.1.20301.2.7.18.8.1.3.3TableqosCurCfgPortStateTablenot-accessiblecurrentThe table of QOS port WRED ECN state configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.3.3.1RowqoSCurCfgPortStateEntrynot-accessiblecurrentInformation about a particular port WRED ECN state configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.3.3.1.1ColumnqosCurCfgStatePortIndexread-onlycurrentSwitch Port Number
1.3.6.1.4.1.20301.2.7.18.8.1.3.3.1.2ColumnqosCurCfgPortWredStateread-onlycurrentThis is for turning on/off WRED per port.
1.3.6.1.4.1.20301.2.7.18.8.1.3.3.1.3ColumnqosCurCfgPortEcnStateread-onlycurrentThis is for turning on/off ECN per port.
1.3.6.1.4.1.20301.2.7.18.8.1.3.3.1.4ColumnqosCurCfgStatePortAliasread-onlycurrentSwitch Port Alias
1.3.6.1.4.1.20301.2.7.18.8.1.3.4TableqosNewCfgPortStateTablenot-accessiblecurrentThe table of QOS port WRED ECN state configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.3.4.1RowqoSNewCfgPortStateEntrynot-accessiblecurrentInformation about a particular port WRED ECN state configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.3.4.1.1ColumnqosNewCfgStatePortIndexread-onlycurrentSwitch Port Number
1.3.6.1.4.1.20301.2.7.18.8.1.3.4.1.2ColumnqosNewCfgPortWredStateread-writecurrentThis is for turning on/off WRED per port
1.3.6.1.4.1.20301.2.7.18.8.1.3.4.1.3ColumnqosNewCfgPortEcnStateread-writecurrentThis is for turning on/off ECN per port.
1.3.6.1.4.1.20301.2.7.18.8.1.3.4.1.4ColumnqosNewCfgStatePortAliasread-onlycurrentSwitch Port Alias
1.3.6.1.4.1.20301.2.7.18.8.1.3.5TableqosCurCfgGlobalProfileTablenot-accessiblecurrentThe table of QOS global WRED ECN profile configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.3.5.1RowqoSCurCfgGlobalProfileEntrynot-accessiblecurrentInformation about a particular Transmit queue of global WRED ECN profile configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.3.5.1.1ColumnqosCurCfgGlobalTrqIndexread-onlycurrentGlobal Transmit Queue Number
1.3.6.1.4.1.20301.2.7.18.8.1.3.5.1.2ColumnqosCurCfgGlobalTrqNonTcpMinread-onlycurrentGlobal transmit queue WRED ECN nontcp profile MinThreshold value
1.3.6.1.4.1.20301.2.7.18.8.1.3.5.1.3ColumnqosCurCfgGlobalTrqNonTcpMaxread-onlycurrentGlobal transmit queue WRED ECN nontcp profile MaxThreshold value
1.3.6.1.4.1.20301.2.7.18.8.1.3.5.1.4ColumnqosCurCfgGlobalTrqNonTcpRateread-onlycurrentGlobal transmit queue WRED ECN nontcp profile DropRate value
1.3.6.1.4.1.20301.2.7.18.8.1.3.5.1.5ColumnqosCurCfgGlobalTrqTcpMinread-onlycurrentGlobal transmit queue WRED ECN tcp profile MinThreshold value
1.3.6.1.4.1.20301.2.7.18.8.1.3.5.1.6ColumnqosCurCfgGlobalTrqTcpMaxread-onlycurrentGlobal transmit queue WRED ECN tcp profile MaxThreshold value
1.3.6.1.4.1.20301.2.7.18.8.1.3.5.1.7ColumnqosCurCfgGlobalTrqTcpRateread-onlycurrentGlobal transmit queue WRED ECN tcp profile DropRate value
1.3.6.1.4.1.20301.2.7.18.8.1.3.5.1.8ColumnqosCurCfgGlobalTrqWredStateread-onlycurrentThis is for turning on/off WRED per global transmit queue
1.3.6.1.4.1.20301.2.7.18.8.1.3.6TableqosNewCfgGlobalProfileTablenot-accessiblecurrentThe table of QOS global WRED ECN profile configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.3.6.1RowqoSNewCfgGlobalProfileEntrynot-accessiblecurrentInformation about a particular Transmit queue of global WRED ECN profile configuration.
1.3.6.1.4.1.20301.2.7.18.8.1.3.6.1.1ColumnqosNewCfgGlobalTrqIndexread-onlycurrentGlobal Transmit Queue Number
1.3.6.1.4.1.20301.2.7.18.8.1.3.6.1.2ColumnqosNewCfgGlobalTrqNonTcpMinread-writecurrentGlobal transmit queue WRED ECN nontcp profile MinThreshold value
1.3.6.1.4.1.20301.2.7.18.8.1.3.6.1.3ColumnqosNewCfgGlobalTrqNonTcpMaxread-writecurrentGlobal transmit queue WRED ECN nontcp profile MaxThreshold value
1.3.6.1.4.1.20301.2.7.18.8.1.3.6.1.4ColumnqosNewCfgGlobalTrqNonTcpRateread-writecurrentGlobal transmit queue WRED ECN nontcp profile DropRate value
1.3.6.1.4.1.20301.2.7.18.8.1.3.6.1.5ColumnqosNewCfgGlobalTrqTcpMinread-writecurrentGlobal transmit queue WRED ECN tcp profile MinThreshold value
1.3.6.1.4.1.20301.2.7.18.8.1.3.6.1.6ColumnqosNewCfgGlobalTrqTcpMaxread-writecurrentGlobal transmit queue WRED ECN tcp profile MaxThreshold value
1.3.6.1.4.1.20301.2.7.18.8.1.3.6.1.7ColumnqosNewCfgGlobalTrqTcpRateread-writecurrentGlobal transmit queue WRED ECN tcp profile DropRate value
1.3.6.1.4.1.20301.2.7.18.8.1.3.6.1.8ColumnqosNewCfgGlobalTrqWredStateread-writecurrentThis is for turning on/off WRED per global transmit queue
1.3.6.1.4.1.20301.2.7.18.8.1.3.7ScalarqosCurCfgGlobalWredStateread-onlycurrentThis is for turning on/off WRED globally.
1.3.6.1.4.1.20301.2.7.18.8.1.3.8ScalarqosCurCfgGlobalEcnStateread-onlycurrentThis is for turning on/off ECN globally.
1.3.6.1.4.1.20301.2.7.18.8.1.3.9ScalarqosNewCfgGlobalWredStateread-writecurrentThis is for turning on/off WRED globally.
1.3.6.1.4.1.20301.2.7.18.8.1.3.10ScalarqosNewCfgGlobalEcnStateread-writecurrentThis is for turning on/off ECN globally.
1.3.6.1.4.1.20301.2.7.18.9Nodeacl
1.3.6.1.4.1.20301.2.7.18.9.1NodeacConfig
1.3.6.1.4.1.20301.2.7.18.9.1.1NodeacList
1.3.6.1.4.1.20301.2.7.18.9.1.1.1TableaclCurCfgTablenot-accessiblecurrentThe table of current ACL configuration.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1RowaclCurCfgEntrynot-accessiblecurrentCurrent information about a particular ACL configuration entry.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.1ColumnaclCurCfgIndexread-onlycurrentThe index associated with this ACL entry.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.3ColumnaclCurCfgGroupread-onlycurrentThe index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.4ColumnaclCurCfgFilterActionread-onlycurrentThe action to be performed on a packet that matches the filter settings of this ACL entry.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.5ColumnaclCurCfgFilterActionSetPrioread-onlycurrentThe value to be used when the action to be performed is setprio for this ACL entry.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.6ColumnaclCurCfgEthFmtread-onlycurrentThe packet ethernet format to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.7ColumnaclCurCfgTagFmtread-onlycurrentThe packet tag format to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.8ColumnaclCurCfgIPFmtread-onlycurrentThe packet IP format to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.9ColumnaclCurCfgSrcMACAddressread-onlycurrentThe source MAC address to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.10ColumnaclCurCfgSrcMACMaskread-onlycurrentThe address mask applied to aclCurCfgSrcMACAddress for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.11ColumnaclCurCfgDstMACAddressread-onlycurrentThe destination MAC address to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.12ColumnaclCurCfgDstMACMaskread-onlycurrentThe address mask applied to aclCurCfgDstMACAddress for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.13ColumnaclCurCfgEthernetTypeNameread-onlycurrentThe Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be fil…
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.14ColumnaclCurCfgEthernetTypeValueread-onlycurrentThe Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthe…
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.15ColumnaclCurCfgVLanIdread-onlycurrentThe virtual LAN identifier to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.16ColumnaclCurCfgVLanMaskread-onlycurrentThe mask applied to aclCurCfgVLanId for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.17ColumnaclCurCfg8021pPriorityread-onlycurrentThe 802.1p priority to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.18ColumnaclCurCfgTypeOfServiceread-onlycurrentThe type of service to be filtered. 'none' for not initialised, within the range 0-255
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.19ColumnaclCurCfgProtocolread-onlycurrentThe protocol to be filtered. 'none' for not initialised, within the range 0-255
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.20ColumnaclCurCfgSrcIPAddressread-onlycurrentThe source IP address to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.21ColumnaclCurCfgSrcIPMaskread-onlycurrentThe address mask applied to aclCurCfgSrcIPAddress for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.22ColumnaclCurCfgDstIPAddressread-onlycurrentThe destination IP address to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.23ColumnaclCurCfgDstIPMaskread-onlycurrentThe address mask applied to aclCurCfgDstIPAddress for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.24ColumnaclCurCfgSrcPortread-onlycurrentThe source TCP/UDP port number to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.25ColumnaclCurCfgSrcPortMaskread-onlycurrentThe mask applied to aclCurCfgSrcPort for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.26ColumnaclCurCfgDstPortread-onlycurrentThe destination TCP/UDP port number to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.27ColumnaclCurCfgDstPortMaskread-onlycurrentThe mask applied to aclCurCfgDstPort for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.28ColumnaclCurCfgTCPFlagsread-onlycurrentThe TCP flags to be filtered. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |_…
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.29ColumnaclCurCfgEgressPortIndexesread-onlycurrentThe port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... |…
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.30ColumnaclCurCfgStatisticsread-onlycurrentWhether statistics collection for this ACL is enabled or not.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.39ColumnaclCurCfgTCPFlagsMaskread-onlycurrentThe TCP flags mask. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________res…
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.41ColumnaclCurCfgMeterActionread-onlycurrentMeter Action for this ACL.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.42ColumnaclCurCfgMeterEnableread-onlycurrentMeter state for this ACL.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.43ColumnaclCurCfgKbitsSecread-onlycurrentThe commited rate of meter associated with this ACL entry.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.44ColumnaclCurCfgKbitsBurstread-onlycurrentThe maxmium burst sizeof meter associated with this ACL entry.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.45ColumnaclCurCfgUserread-onlycurrentSet user defined priority for this ACL.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.46ColumnaclCurCfgInprofDscpread-onlycurrentSet in profile pkts DSCP value.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.47ColumnaclCurCfgTosread-onlycurrentTo enable/disable setting pkts based on TOS bits.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.48ColumnaclCurCfgOutprofDscpread-onlycurrentSet out profile pkts DSCP value.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.49ColumnaclCurCfgUserEnableread-onlycurrentSet update method for this ACL.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.50ColumnaclCurCfgInprofDscpEnableread-onlycurrentWhether in profile update DSCP for this ACL is enabled or not.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.51ColumnaclCurCfgOutprofDscpEnableread-onlycurrentWhether out profile update DSCP for this ACL is enabled or not.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.74ColumnaclCurCfgMirrorPortIndexread-onlycurrentSet port in the ACL for mirroring. n > 0 - the represented port is configured for mirroring. 0 - the represented port is not configured for mirroring.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.81ColumnaclCurCfgLogread-onlycurrentWhether log for this ACL is enabled or not.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.91ColumnaclCurCfgMirrorPortAliasread-onlycurrentThe mirror port alias.
1.3.6.1.4.1.20301.2.7.18.9.1.1.1.1.92ColumnaclCurCfgEgressPortAliasesread-onlycurrentThe egress port alias.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2TableaclNewCfgTablenot-accessiblecurrentThe table of new ACL configuration.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1RowaclNewCfgEntrynot-accessiblecurrentNew information about a particular ACL configuration.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.1ColumnaclNewCfgIndexread-onlycurrentThe index associated with this ACL entry.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.3ColumnaclNewCfgGroupread-onlycurrentThe index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.4ColumnaclNewCfgFilterActionread-writecurrentThe action to be performed on a packet that matches the filter settings of this ACL entry.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.5ColumnaclNewCfgFilterActionSetPrioread-writecurrentThe COS queue to be used when the action for this ACL entry is set to setprio.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.6ColumnaclNewCfgEthFmtread-writecurrentThe packet ethernet format to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.7ColumnaclNewCfgTagFmtread-writecurrentThe packet tagging format to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.8ColumnaclNewCfgIPFmtread-writecurrentThe packet IP format to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.9ColumnaclNewCfgSrcMACAddressread-writecurrentThe source MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcMACMask object, if not yet set, will be automatically se…
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.10ColumnaclNewCfgSrcMACMaskread-writecurrentThe address mask to be applied to aclNewCfgSrcMACAddress for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.11ColumnaclNewCfgDstMACAddressread-writecurrentThe destination MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstMACMask object, if not yet set, will be automatical…
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.12ColumnaclNewCfgDstMACMaskread-writecurrentThe address mask to be applied to aclNewCfgDstMACAddress for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.13ColumnaclNewCfgEthernetTypeNameread-writecurrentThe Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be fil…
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.14ColumnaclNewCfgEthernetTypeValueread-writecurrentThe Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthe…
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.15ColumnaclNewCfgVLanIdread-writecurrentThe virtual LAN identifier to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgVLanMask object, if not yet set, will be automatically …
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.16ColumnaclNewCfgVLanMaskread-writecurrentThe mask to be applied to aclNewCfgVLanId for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.17ColumnaclNewCfg8021pPriorityread-writecurrentThe 802.1p priority to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.18ColumnaclNewCfgTypeOfServiceread-writecurrentThe type of service to be filtered. 'none' for not initialised, within the range 0-255
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.19ColumnaclNewCfgProtocolread-writecurrentThe protocol to be filtered. 'none' for not initialised, within the range 0-255
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.20ColumnaclNewCfgSrcIPAddressread-writecurrentThe source IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set, will be automatically set …
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.21ColumnaclNewCfgSrcIPMaskread-writecurrentThe address mask to be applied to aclNewCfgSrcIPAddress for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.22ColumnaclNewCfgDstIPAddressread-writecurrentThe destination IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstIPMask object, if not yet set, will be automatically…
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.23ColumnaclNewCfgDstIPMaskread-writecurrentThe address mask to be applied to aclNewCfgDstIPAddress for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.24ColumnaclNewCfgSrcPortread-writecurrentThe source TCP/UDP port number to be filtered. Whenever this object is set if the aclNewCfgSrcPortMask object is not set will be automatically set to 65535 (0x…
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.25ColumnaclNewCfgSrcPortMaskread-writecurrentThe mask to be applied to aclNewCfgSrcPort for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.26ColumnaclNewCfgDstPortread-writecurrentThe destination TCP/UDP port number to be filtered. Whenever this object is set the aclNewCfgSrcPortMask object, if not yet set, will be automatically set to 6…
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.27ColumnaclNewCfgDstPortMaskread-writecurrentThe mask to be applied to aclNewCfgDstPort for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.28ColumnaclNewCfgTCPFlagsread-writecurrentThe TCP flags to be filtered. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||…
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.29ColumnaclNewCfgEgressPortIndexesread-onlycurrentThe port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... |…
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.30ColumnaclNewCfgStatisticsread-writecurrentWhether statistics collection for this ACL is enabled or not.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.31ColumnaclNewCfgAddEgressPortIndexread-writecurrentThe port to be added to the specified ACL for egress filtering. A value of zero is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.32ColumnaclNewCfgRemoveEgressPortIndexread-writecurrentThe port to be removed from the specified ACL. A value of zero is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.33ColumnaclNewCfgDeleteread-writecurrentThis is an action object to delete an ACL entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.39ColumnaclNewCfgTCPFlagsMaskread-writecurrentThe TCP flags mask. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpAC…
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.41ColumnaclNewCfgMeterActionread-writecurrentMeter Action for this ACL.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.42ColumnaclNewCfgMeterEnableread-writecurrentMeter state for this ACL.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.43ColumnaclNewCfgKbitsSecread-writecurrentThe commited rate of meter associated with this ACL entry.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.44ColumnaclNewCfgKbitsBurstread-writecurrentThe maximum burst size of the meter associated with this ACL entry.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.45ColumnaclNewCfgUserread-writecurrentSet user defined priority for this ACL.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.46ColumnaclNewCfgInprofDscpread-writecurrentSet in profile pkts DSCP value.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.47ColumnaclNewCfgTosread-writecurrentTo enable/disable setting pkts based on TOS bits.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.48ColumnaclNewCfgOutprofDscpread-writecurrentSet out profile pkts DSCP value.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.49ColumnaclNewCfgUserEnableread-writecurrentSet update method for this ACL.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.50ColumnaclNewCfgInprofDscpEnableread-writecurrentWhether in profile update DSCP for this ACL is enabled or not. Only the value disable(0) can be set, causing the in profile update DSCP to be disabled for this…
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.51ColumnaclNewCfgOutprofDscpEnableread-writecurrentWhether out profile update DSCP for this ACL is enabled or not. Only the value disable(0) can be set, causing the out profile update DSCP to be disabled for th…
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.52ColumnaclNewCfgResetread-writecurrentThis is an action object to reset an ACL entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.53ColumnaclNewCfgEthernetResetread-writecurrentThis is an action object to reset an ACL Ethernet entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.54ColumnaclNewCfgIpv4Resetread-writecurrentThis is an action object to reset an ACL IPV4 entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.55ColumnaclNewCfgTcpudpResetread-writecurrentThis is an action object to reset an ACL Tcpudp entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.56ColumnaclNewCfgMeterResetread-writecurrentThis is an action object to reset an ACL Meter entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.57ColumnaclNewCfgRemarkResetread-writecurrentThis is an action object to reset an ACL Remark entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.58ColumnaclNewCfgRemarkInprofResetread-writecurrentThis is an action object to reset an ACL Remark Inprof entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.59ColumnaclNewCfgRemarkOutprofResetread-writecurrentThis is an action object to reset an ACL Remark Outprof entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.60ColumnaclNewCfgPktfmtResetread-writecurrentThis is an action object to reset an ACL Pktfmt entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.74ColumnaclNewCfgMirrorPortIndexread-writecurrentSet port in the ACL for mirroring. n > 0 - the represented port is configured for mirroring. 0 - the represented port is not configured for mirroring.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.81ColumnaclNewCfgLogread-writecurrentWhether log for this ACL is enabled or not.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.91ColumnaclNewCfgMirrorPortAliasread-writecurrentThe mirror port alias.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.92ColumnaclNewCfgEgressPortAliasesread-onlycurrentThe egress port alias.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.93ColumnaclNewCfgAddEgressPortAliasread-writecurrentThe port to be added using it's alias to the specified ACL for egress filtering. A value of zero is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.1.2.1.94ColumnaclNewCfgRemoveEgressPortAliasread-writecurrentThe port to be removed using it's alias to the specified ACL for egress filtering. A value of zero is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.1.5ScalaraclTableMaxSizeread-onlycurrentThe maximum number of entries in the acl config tables.
1.3.6.1.4.1.20301.2.7.18.9.1.3NodeaclGroup
1.3.6.1.4.1.20301.2.7.18.9.1.3.1TableaclGroupCurCfgTablenot-accessiblecurrentThe table of current ACL Group configuration.
1.3.6.1.4.1.20301.2.7.18.9.1.3.1.1RowaclGroupCurCfgEntrynot-accessiblecurrentInformation about a particular ACL configuration.
1.3.6.1.4.1.20301.2.7.18.9.1.3.1.1.1ColumnaclGroupCurCfgIndexread-onlycurrentThe index associated with this ACL Group entry.
1.3.6.1.4.1.20301.2.7.18.9.1.3.1.1.2ColumnaclGroupCurCfgMemberAclsread-onlycurrentThe ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ …
1.3.6.1.4.1.20301.2.7.18.9.1.3.1.1.9ColumnaclGroupCurCfgMemberAcl6sread-onlycurrentThe ACL6 members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL6 9 || || || ||__…
1.3.6.1.4.1.20301.2.7.18.9.1.3.2TableaclGroupNewCfgTablenot-accessiblecurrentThe table of new ACL Group configuration.
1.3.6.1.4.1.20301.2.7.18.9.1.3.2.1RowaclGroupNewCfgEntrynot-accessiblecurrentNew information about a particular ACL configuration.
1.3.6.1.4.1.20301.2.7.18.9.1.3.2.1.1ColumnaclGroupNewCfgIndexread-onlycurrentThe index associated with this ACL Group entry.
1.3.6.1.4.1.20301.2.7.18.9.1.3.2.1.2ColumnaclGroupNewCfgMemberAclsread-onlycurrentThe ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ …
1.3.6.1.4.1.20301.2.7.18.9.1.3.2.1.4ColumnaclGroupNewCfgAddAclread-writecurrentThe index of the ACL entry to be added into this ACL group. A successful set operation on this object will also set the bit corresponding to the ACL entry in t…
1.3.6.1.4.1.20301.2.7.18.9.1.3.2.1.5ColumnaclGroupNewCfgRemoveAclread-writecurrentThe index of the ACL entry to be removed from this ACL group. A successful set operation on this object will unset the bit corresponding to the ACL entry in th…
1.3.6.1.4.1.20301.2.7.18.9.1.3.2.1.8ColumnaclGroupNewCfgDeleteread-writecurrentThis is an action object to delete an ACL group. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.3.2.1.9ColumnaclGroupNewCfgMemberAcl6sread-onlycurrentThe ACL6 members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL6 9 || || || ||__…
1.3.6.1.4.1.20301.2.7.18.9.1.3.2.1.10ColumnaclGroupNewCfgAddAcl6read-writecurrentThe index of the ACL6 entry to be added into this ACL group. A successful set operation on this object will also set the bit corresponding to the ACL6 entry in…
1.3.6.1.4.1.20301.2.7.18.9.1.3.2.1.11ColumnaclGroupNewCfgRemoveAcl6read-writecurrentThe index of the ACL entry to be removed from this ACL group. A successful set operation on this object will unset the bit corresponding to the ACL entry in th…
1.3.6.1.4.1.20301.2.7.18.9.1.4NodeaclCfg
1.3.6.1.4.1.20301.2.7.18.9.1.4.1TableaclCurCfgPortTablenot-accessiblecurrentThe table of port acl groups configuration.
1.3.6.1.4.1.20301.2.7.18.9.1.4.1.1RowaclCurCfgPortTableEntrynot-accessiblecurrentInformation about a particular port acl configuration.
1.3.6.1.4.1.20301.2.7.18.9.1.4.1.1.1ColumnaclCurCfgPortIndexread-onlycurrentThe identifier of a particular port. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.20301.2.7.18.9.1.4.1.1.2ColumnaclCurCfgPortAclBmapread-onlycurrentThe acls applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2 .....…
1.3.6.1.4.1.20301.2.7.18.9.1.4.1.1.4ColumnaclCurCfgPortAclGrpBmapread-onlycurrentThe acl groups applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2…
1.3.6.1.4.1.20301.2.7.18.9.1.4.1.1.13ColumnaclCurCfgPortAcl6Bmapread-onlycurrentThe acls applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 128. in receiving order: OCTET 1 OCTET 2 .....…
1.3.6.1.4.1.20301.2.7.18.9.1.4.1.1.14ColumnaclCurCfgPortAliasread-onlycurrentThe alias of a particular port.
1.3.6.1.4.1.20301.2.7.18.9.1.4.2TableaclNewCfgPortTablenot-accessiblecurrentThe table of port acl configuration.
1.3.6.1.4.1.20301.2.7.18.9.1.4.2.1RowaclNewCfgPortTableEntrynot-accessiblecurrentInformation about a particular port acl groups configuration.
1.3.6.1.4.1.20301.2.7.18.9.1.4.2.1.1ColumnaclNewCfgPortIndexread-onlycurrentThe identifier of a particular port. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.20301.2.7.18.9.1.4.2.1.2ColumnaclNewCfgPortAddAclread-writecurrentThe acl to be added to the specified port. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.9.1.4.2.1.4ColumnaclNewCfgPortAddAclGrpread-writecurrentThe acl group to be added to the specified port. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.9.1.4.2.1.5ColumnaclNewCfgPortRemoveAclread-writecurrentThe acl to be removed from the specified port. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.9.1.4.2.1.7ColumnaclNewCfgPortRemoveAclGrpread-writecurrentThe acl group to be removed from the specified port. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.9.1.4.2.1.8ColumnaclNewCfgPortAclBmapread-onlycurrentThe acls applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2 .....…
1.3.6.1.4.1.20301.2.7.18.9.1.4.2.1.10ColumnaclNewCfgPortAclGrpBmapread-onlycurrentThe acl groups applied to the port. The acl groups are presented in bitmap format. This string displays group number from 1 to 4096. in receiving order: OCTET …
1.3.6.1.4.1.20301.2.7.18.9.1.4.2.1.11ColumnaclNewCfgPortAddAcl6read-writecurrentThe acl6 to be added to the specified port. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.9.1.4.2.1.12ColumnaclNewCfgPortRemoveAcl6read-writecurrentThe acl6 to be removed from the specified port. A '0' value is returned when read.
1.3.6.1.4.1.20301.2.7.18.9.1.4.2.1.13ColumnaclNewCfgPortAcl6Bmapread-onlycurrentThe acl6s applied to the port. The acl6s are presented in bitmap format. This string displays acl number from 1 to 128. in receiving order: OCTET 1 OCTET 2 ...…
1.3.6.1.4.1.20301.2.7.18.9.1.4.2.1.14ColumnaclNewCfgPortAliasread-onlycurrentThe alias of a particular port.
1.3.6.1.4.1.20301.2.7.18.9.1.5Nodeacl6List
1.3.6.1.4.1.20301.2.7.18.9.1.5.1Tableacl6CurCfgTablenot-accessiblecurrentThe table of current ACL6 configuration.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1Rowacl6CurCfgEntrynot-accessiblecurrentCurrent information about a particular ACL6 configuration entry.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.1Columnacl6CurCfgIndexread-onlycurrentThe index associated with this ACL6 entry.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.2Columnacl6CurCfgGroupread-onlycurrentThe index of the ACL group to which this ACL6 entry is a member of. A value of zero means the ACL6 is not a member of any group.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.3Columnacl6CurCfgFilterActionread-onlycurrentThe action to be performed on a packet that matches the filter settings of this ACL6 entry.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.4Columnacl6CurCfgFilterActionSetPrioread-onlycurrentThe value to be used when the action to be performed is setprio for this ACL6 entry.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.5Columnacl6CurCfgSrcIPv6Addressread-onlycurrentThe source IPv6 address to be filtered. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xx…
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.6Columnacl6CurCfgSrcIPv6PrefixLenread-onlycurrentThe IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.7Columnacl6CurCfgDstIPv6Addressread-onlycurrentThe destination IPv6 address to be filtered. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xx…
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.8Columnacl6CurCfgDstIPv6PrefixLenread-onlycurrentThe IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.9Columnacl6CurCfgIPv6FlowLabelread-onlycurrentThe IPv6 FlowLabel to be filtered. 'none' for not initialised, within the range 0-1048575
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.10Columnacl6CurCfgIPv6TrafficClassread-onlycurrentThe IPv6 Traffic Class to be filtered. 'none' for not initialised, within the range 0-255
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.11Columnacl6CurCfgIPv6NextHeaderread-onlycurrentThe IPv6 next header to be filtered. 'none' for not initialised, within the range 0-255
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.12Columnacl6CurCfgSrcPortread-onlycurrentThe source TCP/UDP port number to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.13Columnacl6CurCfgSrcPortMaskread-onlycurrentThe mask applied to acl6CurCfgSrcPort for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.14Columnacl6CurCfgDstPortread-onlycurrentThe destination TCP/UDP port number to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.15Columnacl6CurCfgDstPortMaskread-onlycurrentThe mask applied to acl6CurCfgDstPort for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.16Columnacl6CurCfgTCPFlagsread-onlycurrentThe TCP flags to be filtered. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |_…
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.17Columnacl6CurCfgTCPFlagsMaskread-onlycurrentThe TCP flags mask. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________res…
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.18Columnacl6CurCfgEgressPortIndexesread-onlycurrentThe port list in the ACL6 configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... …
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.19Columnacl6CurCfgStatisticsread-onlycurrentWhether statistics collection for this ACL6 is enabled or not.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.20Columnacl6CurCfgUserread-onlycurrentSet user defined priority for this ACL6.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.21Columnacl6CurCfgInprofDscpread-onlycurrentSet in profile pkts DSCP value.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.22Columnacl6CurCfgTosread-onlycurrentTo enable/disable setting pkts based on TOS bits.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.24Columnacl6CurCfgUserEnableread-onlycurrentSet update method for this ACL6.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.25Columnacl6CurCfgInprofDscpEnableread-onlycurrentWhether in profile update DSCP for this ACL6 is enabled or not.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.26Columnacl6CurCfgLogread-onlycurrentWhether log for this ACL is enabled or not.
1.3.6.1.4.1.20301.2.7.18.9.1.5.1.1.34Columnacl6CurCfgEgressPortAliasesread-onlycurrentThe port alias in the ACL6 configured for egress filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2Tableacl6NewCfgTablenot-accessiblecurrentThe table of new ACL6 configuration.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1Rowacl6NewCfgEntrynot-accessiblecurrentNew information about a particular ACL6 configuration.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.1Columnacl6NewCfgIndexread-onlycurrentThe index associated with this ACL6 entry.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.2Columnacl6NewCfgGroupread-onlycurrentThe index of the ACL group to which this ACL6 entry is a member of. A value of zero means the ACL6 is not a member of any group.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.3Columnacl6NewCfgFilterActionread-writecurrentThe action to be performed on a packet that matches the filter settings of this ACL6 entry.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.4Columnacl6NewCfgFilterActionSetPrioread-writecurrentThe COS queue to be used when the action for this ACL6 entry is set to setprio.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.5Columnacl6NewCfgSrcIPv6Addressread-writecurrentThe source IPv6 address to be filtered. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xx…
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.6Columnacl6NewCfgSrcIPv6PrefixLenread-writecurrentThe IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.7Columnacl6NewCfgDstIPv6Addressread-writecurrentThe destination IPv6 address to be filtered. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xx…
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.8Columnacl6NewCfgDstIPv6PrefixLenread-writecurrentThe IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.9Columnacl6NewCfgIPv6FlowLabelread-writecurrentThe IPv6 flow label to be filtered. 'none' for not initialised, within the range 0-1048575
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.10Columnacl6NewCfgIPv6TrafficClassread-writecurrentThe IPv6 traffic class to be filtered. 'none' for not initialised, within the range 0-255
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.11Columnacl6NewCfgIPv6NextHeaderread-writecurrentThe IPv6 next header to be filtered. 'none' for not initialised, within the range 0-255
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.12Columnacl6NewCfgSrcPortread-writecurrentThe source TCP/UDP port number to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.13Columnacl6NewCfgSrcPortMaskread-writecurrentThe mask applied to acl6CurCfgSrcPort for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.14Columnacl6NewCfgDstPortread-writecurrentThe destination TCP/UDP port number to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.15Columnacl6NewCfgDstPortMaskread-writecurrentThe mask applied to acl6CurCfgDstPort for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.16Columnacl6NewCfgTCPFlagsread-writecurrentThe TCP flags to be filtered. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |_…
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.17Columnacl6NewCfgTCPFlagsMaskread-writecurrentThe TCP flags mask. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________res…
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.18Columnacl6NewCfgEgressPortIndexesread-onlycurrentThe port list in the ACL6 configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... …
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.19Columnacl6NewCfgStatisticsread-writecurrentWhether statistics collection for this ACL6 is enabled or not.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.20Columnacl6NewCfgAddEgressPortIndexread-writecurrentThe port to be added to the specified ACL6 for egress filtering. A value of zero is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.21Columnacl6NewCfgRemoveEgressPortIndexread-writecurrentThe port to be removed from the specified ACL6. A value of zero is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.22Columnacl6NewCfgDeleteread-writecurrentThis is an action object to delete an ACL6 entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.23Columnacl6NewCfgUserread-writecurrentSet user defined priority for this ACL6.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.24Columnacl6NewCfgInprofDscpread-writecurrentSet in profile pkts DSCP value.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.25Columnacl6NewCfgTosread-writecurrentTo enable/disable setting pkts based on TOS bits.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.27Columnacl6NewCfgUserEnableread-writecurrentSet update method for this ACL6.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.28Columnacl6NewCfgInprofDscpEnableread-writecurrentWhether in profile update DSCP for this ACL6 is enabled or not. Only the value disable(0) can be set, causing the in profile update DSCP to be disabled for thi…
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.30Columnacl6NewCfgIPv6Resetread-writecurrentThis is an action object to reset an ACL IPV6 entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.31Columnacl6NewCfgTcpudpResetread-writecurrentThis is an action object to reset an ACL6 Tcpudp entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.32Columnacl6NewCfgRemarkInprofResetread-writecurrentThis is an action object to reset an ACL Remark Inprof entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.33Columnacl6NewCfgLogread-writecurrentWhether log for this ACL is enabled or not.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.43Columnacl6NewCfgAddEgressPortAliasread-writecurrentThe port alias to be added to the specified ACL6 for egress filtering. A value of zero is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.44Columnacl6NewCfgRemoveEgressPortAliasread-writecurrentThe port alias to be removed from the specified ACL6. A value of zero is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.5.2.1.45Columnacl6NewCfgEgressPortAliasesread-onlycurrentThe port alias in the ACL6 configured for egress filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.5.3Scalaracl6TableMaxSizeread-onlycurrentThe maximum number of entries in the acl6 config tables.
1.3.6.1.4.1.20301.2.7.18.9.1.6NodeaclLog
1.3.6.1.4.1.20301.2.7.18.9.1.6.1ScalaraclLogCurIntervalread-onlycurrentThe interval secends of displaying Logs. Default is 300s.
1.3.6.1.4.1.20301.2.7.18.9.1.6.2ScalaraclLogNewIntervalread-writecurrentThe interval secends of displaying Logs. Default is 300s.
1.3.6.1.4.1.20301.2.7.18.9.1.6.3ScalaraclLogCurRateLimitread-onlycurrentThe rate limit of ACL Log queue. Default is 10pps.
1.3.6.1.4.1.20301.2.7.18.9.1.6.4ScalaraclLogNewRateLimitread-writecurrentThe rate limit of ACL Log queue. Default is 10pps.
1.3.6.1.4.1.20301.2.7.18.9.1.7NodemAcl
1.3.6.1.4.1.20301.2.7.18.9.1.7.1TablemAclCurCfgTablenot-accessiblecurrentThe table of current Management ACL configuration.
1.3.6.1.4.1.20301.2.7.18.9.1.7.1.1RowmAclCurCfgEntrynot-accessiblecurrentCurrent information about a particular Management ACL configuration entry.
1.3.6.1.4.1.20301.2.7.18.9.1.7.1.1.1ColumnmAclCurCfgIndexread-onlycurrentThe index associated with this Management ACL entry.
1.3.6.1.4.1.20301.2.7.18.9.1.7.1.1.2ColumnmAclCurCfgUserEnableread-onlycurrentSet update method for this mACL.
1.3.6.1.4.1.20301.2.7.18.9.1.7.1.1.3ColumnmAclCurCfgFilterActionread-onlycurrentThe action to be performed on a packet that matches the filter settings of this mACL entry.
1.3.6.1.4.1.20301.2.7.18.9.1.7.1.1.4ColumnmAclCurCfgProtocolread-onlycurrentThe protocol to be filtered. 'none' for not initialised, within the range 0-255
1.3.6.1.4.1.20301.2.7.18.9.1.7.1.1.5ColumnmAclCurCfgSrcIPAddressread-onlycurrentThe source IP address to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.7.1.1.6ColumnmAclCurCfgSrcIPMaskread-onlycurrentThe address mask applied to mAclCurCfgSrcIPAddress for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.7.1.1.7ColumnmAclCurCfgDstIPAddressread-onlycurrentThe destination IP address to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.7.1.1.8ColumnmAclCurCfgDstIPMaskread-onlycurrentThe address mask applied to mAclCurCfgDstIPAddress for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.7.1.1.9ColumnmAclCurCfgSrcPortread-onlycurrentThe source TCP/UDP port number to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.7.1.1.10ColumnmAclCurCfgSrcPortMaskread-onlycurrentThe mask applied to mAclCurCfgSrcPort for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.7.1.1.11ColumnmAclCurCfgDstPortread-onlycurrentThe destination TCP/UDP port number to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.7.1.1.12ColumnmAclCurCfgDstPortMaskread-onlycurrentThe mask applied to mAclCurCfgDstPort for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.7.1.1.13ColumnmAclCurCfgStatisticsread-onlycurrentWhether statistics collection for this mACL is enabled or not.
1.3.6.1.4.1.20301.2.7.18.9.1.7.2TablemAclNewCfgTablenot-accessiblecurrentThe table of new Management ACL configuration.
1.3.6.1.4.1.20301.2.7.18.9.1.7.2.1RowmAclNewCfgEntrynot-accessiblecurrentNew information about a particular Management ACL configuration entry.
1.3.6.1.4.1.20301.2.7.18.9.1.7.2.1.1ColumnmAclNewCfgIndexread-onlycurrentThe index associated with this Management ACL entry.
1.3.6.1.4.1.20301.2.7.18.9.1.7.2.1.2ColumnmAclNewCfgUserEnableread-writecurrentSet update method for this mACL.
1.3.6.1.4.1.20301.2.7.18.9.1.7.2.1.3ColumnmAclNewCfgFilterActionread-writecurrentThe action to be performed on a packet that matches the filter settings of this mACL entry.
1.3.6.1.4.1.20301.2.7.18.9.1.7.2.1.4ColumnmAclNewCfgProtocolread-writecurrentThe protocol to be filtered. 'none' for not initialised, within the range 0-255
1.3.6.1.4.1.20301.2.7.18.9.1.7.2.1.5ColumnmAclNewCfgSrcIPAddressread-writecurrentThe source IP address to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.7.2.1.6ColumnmAclNewCfgSrcIPMaskread-writecurrentThe address mask applied to mAclNewCfgSrcIPAddress for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.7.2.1.7ColumnmAclNewCfgDstIPAddressread-writecurrentThe destination IP address to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.7.2.1.8ColumnmAclNewCfgDstIPMaskread-writecurrentThe address mask applied to mAclNewCfgDstIPAddress for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.7.2.1.9ColumnmAclNewCfgSrcPortread-writecurrentThe source TCP/UDP port number to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.7.2.1.10ColumnmAclNewCfgSrcPortMaskread-writecurrentThe mask applied to mAclNewCfgSrcPort for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.7.2.1.11ColumnmAclNewCfgDstPortread-writecurrentThe destination TCP/UDP port number to be filtered.
1.3.6.1.4.1.20301.2.7.18.9.1.7.2.1.12ColumnmAclNewCfgDstPortMaskread-writecurrentThe mask applied to mAclNewCfgDstPort for filtering.
1.3.6.1.4.1.20301.2.7.18.9.1.7.2.1.13ColumnmAclNewCfgStatisticsread-writecurrentWhether statistics collection for this mACL is enabled or not.
1.3.6.1.4.1.20301.2.7.18.9.1.7.2.1.14ColumnmAclNewCfgDeleteread-writecurrentThis is an action object to delete an MACL entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.7.2.1.15ColumnmAclNewCfgResetread-writecurrentThis is an action object to reset an MACL entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.7.2.1.16ColumnmAclNewCfgIpv4Resetread-writecurrentThis is an action object to reset an ACL IPV4 entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.2.7.18.9.1.7.2.1.17ColumnmAclNewCfgTcpudpResetread-writecurrentThis is an action object to reset an MACL Tcpudp entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.20301.3IdentityibmGbTORG7052MIBMIB for Lenovo RackSwitch G7052 All Rights reserved DEVICE VERSION: 8.4.12.0
1.3.6.1.4.1.20301.100Nodeibmnos-BladeSwitch
1.3.6.1.4.1.20301.100.27Nodeibmnoscfa
1.3.6.1.4.1.20301.100.27.1Nodeif
1.3.6.1.4.1.20301.100.27.1.4TableifMainTablenot-accessiblecurrentA list of all the interface entries in the system. This table contains objects which are applicable to all types of interfaces in the system. This table is a p…
1.3.6.1.4.1.20301.100.27.1.4.1RowifMainEntrynot-accessiblecurrentAn entry containing management information applicable to a particular interface.
1.3.6.1.4.1.20301.100.27.1.4.1.1ColumnifMainIndexnot-accessiblecurrentA unique value, greater than zero, for each interface. This object is identical to the ifIndex of the standard MIB-2 ifTable.
1.3.6.1.4.1.20301.100.27.1.4.1.9ColumnifMainPortNameread-writecurrentThis is used to assign a alias to a port
1.3.6.1.4.1.20301.100.81Nodeibmnos
1.3.6.1.4.1.20301.100.81.1NodeibmnosSystem
1.3.6.1.4.1.20301.100.81.1.10ScalaribmnosConfigSaveOptionread-writecurrentSpecifies whether the configurations of the switch has to be saved or not. The value 'noSave' specifies that the configurations need not be saved. The value 'f…
1.3.6.1.4.1.20301.100.81.1.12ScalaribmnosConfigSaveFileNameread-writecurrentName of the file in which the switch configurations are to be saved. This object is valid only if 'issConfigSaveOption' is chosen to be 'flashSave' or 'remoteS…
1.3.6.1.4.1.20301.100.81.1.13ScalaribmnosInitiateConfigSaveread-writecurrentWhen set as 'true' switch configurations save operation is initiated. As soon as the configuration save operation is completed, the value of this object revert…
1.3.6.1.4.1.20301.100.81.1.14ScalaribmnosConfigSaveStatusread-onlycurrentStatus of configuration save operation.
1.3.6.1.4.1.20301.100.81.1.15ScalaribmnosConfigRestoreOptionread-writecurrentSpecifies whether the switch configurations have to be restored or not. The value 'factory' specifies that the switch configurations need not be restored when …
1.3.6.1.4.1.20301.100.81.1.26ScalaribmnosLoggingOptionread-writecurrentThe Logging option specifying whether the logging is to be done at console or to a file(system buffer) in the system.
1.3.6.1.4.1.20301.100.81.1.32ScalaribmnosLoginAuthenticationread-writecurrentThe mechanism by which the user login to access the GUI for configuration has to be authenticated. Authentication is done either locally or in the remote side …
1.3.6.1.4.1.20301.100.81.1.40ScalaribmnosConfigRestoreFileVersionread-onlycurrentConfig Restoration file version. This version will be compared in each reboot against version stored in restoration file. Restoration will occur only if the fi…
1.3.6.1.4.1.20301.100.81.2NodeibmnosConfigControl
1.3.6.1.4.1.20301.100.81.2.2TableibmnosPortCtrlTablenot-accessiblecurrentA table to control the port specific parameters of the device like speed, duplex mode, etc.
1.3.6.1.4.1.20301.100.81.2.2.1RowibmnosPortCtrlEntrynot-accessiblecurrentAn entry appears in this table for each interface in the system. Index to the table is the interface index of the port.
1.3.6.1.4.1.20301.100.81.2.2.1.1ColumnibmnosPortCtrlIndexnot-accessiblecurrentInterface index of the port for which the configuration in this entry applies.
1.3.6.1.4.1.20301.100.81.2.2.1.2ColumnibmnosPortCtrlModeread-writecurrentSpeficies the mode in which the speed, duplex modes and flow control of the interface is determined. If set as 'auto', the hardware senses speed and negotiates…
1.3.6.1.4.1.20301.100.81.2.2.1.3ColumnibmnosPortCtrlDuplexread-writecurrentConfigures interface data transfer mode as full-duplex or half-duplex. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'Por…
1.3.6.1.4.1.20301.100.81.2.2.1.4ColumnibmnosPortCtrlSpeedread-writecurrentConfigures interface speed. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value …
1.3.6.1.4.1.20301.100.81.2.2.1.5ColumnibmnosPortCtrlFlowControlread-writecurrentEnables / disables flow control for the interface. This object be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it…
1.3.6.1.4.1.20301.100.81.2.2.1.10ColumnibmnosPortCtrlAliasread-onlycurrentThe port alias.
1.3.6.1.4.1.20301.100.100Nodetoraddon
1.3.6.1.4.1.20301.100.100.2Nodecfa
1.3.6.1.4.1.20301.100.100.2.1TableibmnosPortCfgTablenot-accessiblecurrentThe table of port configuration in the new_configuration block.
1.3.6.1.4.1.20301.100.100.2.1.1RowibmnosPortCfgTableEntrynot-accessiblecurrentA row in the port configuration table in the new_configuration block.
1.3.6.1.4.1.20301.100.100.2.1.1.1ColumnibmnosPortCfgIndxnot-accessiblecurrentThe index of the row in port configurations table.
1.3.6.1.4.1.20301.100.100.2.1.1.2ColumnibmnosPortCfgVlanTagread-writecurrentVLAN tag configured for the port
1.3.6.1.4.1.20301.100.100.7Nodesys
1.3.6.1.4.1.20301.100.100.7.2ScalaragImageForNextResetread-writecurrentThe software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2
1.3.6.1.4.1.20301.100.100.13NodeibmnosFdb
1.3.6.1.4.1.20301.100.100.13.5TableibmnosFdbTablenot-accessiblecurrentThe table of FDB entries.
1.3.6.1.4.1.20301.100.100.13.5.1RowibmnosFdbEntrynot-accessiblecurrentA row in the FDB table
1.3.6.1.4.1.20301.100.100.13.5.1.1ColumnibmnosFdbVlannot-accessiblecurrentThe VLAN ID for the FDB entry.
1.3.6.1.4.1.20301.100.100.13.5.1.2ColumnibmnosFdbMacAddrnot-accessiblecurrentThe MAC address for the FDB entry.
1.3.6.1.4.1.20301.100.100.13.5.1.3ColumnibmnosFdbMacAddrStrread-onlycurrentThe MAC address in hex format for the FDB entry. This node is added for display purpose.
1.3.6.1.4.1.20301.100.100.13.5.1.4ColumnibmnosFdbVlanIdread-onlycurrentThe VLAN ID for the FDB entry. This node is added for display purpose.
1.3.6.1.4.1.20301.100.100.13.5.1.5ColumnibmnosFdbSrcPortread-onlycurrentEither the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance has been seen. A…
1.3.6.1.4.1.20301.100.100.13.5.1.6ColumnibmnosFdbSrcTrunkread-onlycurrentEither the value '0', or the trunk number of the trunk on which a frame having a source address equal to the value of the corresponding instance has been seen.…
1.3.6.1.4.1.20301.100.100.13.5.1.7ColumnibmnosFdbStateread-onlycurrentThe state of the FDB entry. The meanings of the values are : unknown(1) : the MAC address has not yet been learned by the switch but has only been seen as a de…
1.3.6.1.4.1.20301.100.100.13.5.1.10ColumnibmnosFdbStatusread-onlycurrent'1' if it is permanent '0' if it is not permanent
1.3.6.1.4.1.20301.100.100.13.5.1.11ColumnibmnosFdbClearMacread-writecurrentSetting this value to clear(2) clears the corresponding table entry in FDB.
1.3.6.1.4.1.20301.100.100.14Nodetor-switch
1.3.6.1.4.1.20301.100.100.14.1ScalarhardwarePartNumberread-onlycurrentThe hardware part number of the Blade Switch.
1.3.6.1.4.1.20301.100.100.14.3ScalarhardwareLastBootread-onlycurrentReason of the last boot.
1.3.6.1.4.1.20301.100.100.14.4ScalarhardwareMACAddressread-onlycurrentThe MAC address.
1.3.6.1.4.1.20301.100.100.14.5ScalarhardwareSwitchRunningSwVersionread-onlycurrentThe switch software version.
1.3.6.1.4.1.20301.100.100.14.6ScalarhardwareFlashConfigurationread-onlycurrentThe active flash configuration.
1.3.6.1.4.1.20301.100.100.14.9ScalarhardwareSerialNumberread-onlycurrentThe switch serial number.
1.3.6.1.4.1.20301.100.100.14.10ScalarhardwareManufacturingDateread-onlycurrentThe date of manufacturing.
1.3.6.1.4.1.20301.100.100.14.11ScalarhwTemperatureSensor1read-onlycurrentThe temperature sensor 1.
1.3.6.1.4.1.20301.100.100.14.12ScalarhwTemperatureSensor2read-onlycurrentThe temperature sensor 2.
1.3.6.1.4.1.20301.100.100.14.13ScalarhwTemperatureSensor3read-onlycurrentThe temperature sensor 3.
1.3.6.1.4.1.20301.100.100.14.14ScalarhwFan1RPMValueread-onlycurrentThe Fan 1 RPM value.
1.3.6.1.4.1.20301.100.100.14.15ScalarhwFan2RPMValueread-onlycurrentThe Fan 2 RPM value.
1.3.6.1.4.1.20301.100.100.14.16ScalarhwFan3RPMValueread-onlycurrentThe Fan 3 RPM value.
1.3.6.1.4.1.20301.100.100.14.20ScalarhwPowerSupply1Stateread-onlycurrentThe Power Supply 1 state.
1.3.6.1.4.1.20301.100.100.14.21ScalarhwPowerSupply2Stateread-onlycurrentThe Power Supply 2 state.
1.3.6.1.4.1.20301.100.100.14.22TableibmnosSfpInfoTablenot-accessiblecurrentThe table of external port SFP information.
1.3.6.1.4.1.20301.100.100.14.22.1RowibmnosSfpInfoTableEntrynot-accessiblecurrentA row in the external port SFP information table.
1.3.6.1.4.1.20301.100.100.14.22.1.1ColumnibmnosSfpInfoIndxread-onlycurrentSfp Info index (port number)
1.3.6.1.4.1.20301.100.100.14.22.1.2ColumnibmnosSfpInfoDescriptionread-onlycurrentType Ethernet device (None(0), SFP(1), CX4(2), SFPplus(3), DAC(6))
1.3.6.1.4.1.20301.100.100.14.22.1.3ColumnibmnosSfpInfoSerialNumberread-onlycurrentSerial Number.
1.3.6.1.4.1.20301.100.100.14.22.1.4ColumnibmnosSfpInfoPartNumberread-onlycurrentPart Number.
1.3.6.1.4.1.20301.100.100.14.22.1.5ColumnibmnosSfpInfoHWRevisionread-onlycurrentHardware Revision
1.3.6.1.4.1.20301.100.100.14.24ScalarswImage1Versionread-onlycurrentSoftware image1 version
1.3.6.1.4.1.20301.100.100.14.25ScalarswImage2Versionread-onlycurrentSoftware image2 version
1.3.6.1.4.1.20301.100.100.14.26ScalarswBootVersionread-onlycurrentSoftware boot version
1.3.6.1.4.1.20301.100.100.14.32ScalarhwTemperatureSensor4read-onlycurrentThe temperature sensor 4.
1.3.6.1.4.1.20301.100.100.14.33ScalarhwTemperatureSensor5read-onlycurrentThe temperature sensor 5.
1.3.6.1.4.1.20301.100.100.14.34ScalarhwTemperatureSensor6read-onlycurrentThe temperature sensor 4.
1.3.6.1.4.1.20301.100.100.14.42ScalarhwBootTimeread-onlycurrentThe hardware system boot time .
1.3.6.1.4.1.20301.100.100.17NodeibmnosBladeHarmony
1.3.6.1.4.1.20301.100.100.17.1NodedataCollection
1.3.6.1.4.1.20301.100.100.17.1.1ScalaribmnosPortTableMaxEntread-onlycurrentThe maximum number of rows in the port configuration host table.
1.3.6.1.4.1.20301.100.100.17.1.3ScalaribmnosImage1Verread-onlycurrentThe version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available o…
1.3.6.1.4.1.20301.100.100.17.1.4ScalaribmnosImage2Verread-onlycurrentThe version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available o…
1.3.6.1.4.1.20301.100.100.17.1.5ScalarhwSwitchSoftwareVersionread-onlycurrentThe switch software version.
1.3.6.1.4.1.20301.100.100.17.1.6ScalarhwSerialNumread-onlycurrentThe switch serial number.
1.3.6.1.4.1.20301.100.100.17.1.7ScalarhwManufacturingDateread-onlycurrentThe date of manufacturing.
1.3.6.1.4.1.20301.100.100.17.1.8ScalaribmnosResetread-writecurrentThis is an action object to reboot the agent. other(1) is returned always when read.
1.3.6.1.4.1.20301.100.100.17.1.9ScalaribmnosBootVerread-onlycurrentThe version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available.
1.3.6.1.4.1.20301.100.100.17.1.10ScalaribmnosConfigForNxtResetread-writecurrentThe configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup con…
1.3.6.1.4.1.20301.100.100.17.1.11ScalaribmnosSoftwareVersionread-onlycurrentThe version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if …
1.3.6.1.4.1.20301.100.100.17.3NodeimageConfigTransfer
1.3.6.1.4.1.20301.100.100.17.3.1ScalaragTftpServerread-writecurrentThe TFTP server IP address or domain name.
Type Definitions
NameSyntaxStatusDescription
PortNumberUnsigned32currentRepresents a port number of a switch.
TimeoutInteger32currentTime out value in 4 byte
VlanIdInteger32 (1..4094)currentA 12-bit VLAN ID used in the VLAN Tag header.