LENOVO-GbTOR-G8264CS-SIF-MIB
3358 objects
MIB for Lenovo G8264CS, SI Fabric All Rights reserved DEVICE VERSION: 8.4.12.0
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20301 | Nodeibmnetwork | |||
| 1.3.6.1.4.1.20301.1 | Noderegistration | |||
| 1.3.6.1.4.1.20301.1.7 | Nodeibm-switch | |||
| 1.3.6.1.4.1.20301.1.7.21 | Nodeg8264CS-SIF | |||
| 1.3.6.1.4.1.20301.2 | Nodeprivate-mibs | |||
| 1.3.6.1.4.1.20301.2.7 | Nodeibm-switch-mgmt | |||
| 1.3.6.1.4.1.20301.2.7.21 | Nodeg8264CS-SIF-mgmt | |||
| 1.3.6.1.4.1.20301.2.7.21.1 | Nodeagent | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1 | NodeagentConfig | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.1 | NodeagSystem | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.2 | ScalaragApplyConfiguration | read-write | current | This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply … |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.3 | ScalaragSavePending | read-only | current | This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.4 | ScalaragSaveConfiguration | read-write | current | This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to … |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.5 | ScalaragRevert | read-write | current | This is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied changes will be reverted. Thi… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.6 | ScalaragRevertApply | read-write | current | This is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.7 | ScalaragReset | read-write | current | This is an action object to reboot the agent. other(1) is returned always when read. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.8 | ScalaragConfigForNxtReset | read-write | current | The configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup con… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.9 | ScalaragImageForNxtReset | read-write | current | The software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2 |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.10 | ScalaragSoftwareVersion | read-only | current | The version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if … |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.11 | ScalaragBootVer | read-only | current | The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.12 | ScalaragImage1Ver | read-only | current | The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available o… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.13 | ScalaragImage2Ver | read-only | current | The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available o… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.14 | ScalaragRtcDate | read-write | current | The date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.15 | ScalaragRtcTime | read-write | current | The time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.16 | ScalaragLastSetErrorReason | read-only | current | The error reason of the last SET failure. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.19 | ScalaragCurCfgLoginBanner | read-only | current | The user defined login banner. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.20 | ScalaragNewCfgLoginBanner | read-write | current | The user defined login banner. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.23 | ScalaragCurCfgConsole | read-only | current | Enable or disable console output of syslog messages. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.24 | ScalaragNewCfgConsole | read-write | current | Enable or disable console output of syslog messages. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.29 | ScalaragCurCfgBootp | read-only | current | Enable or disable the use of BootP, as currently configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.30 | ScalaragNewCfgBootp | read-write | current | Enable or disable the use of BootP, in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.31 | ScalaragSlotNumber | read-only | current | Identifies the slot in which this switch is installed. If the agent implementing this MIB is not a blade in a chassis this value has no meaning. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.32 | ScalaragCurCfgSnmpTimeout | read-only | current | Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be fr… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.33 | ScalaragNewCfgSnmpTimeout | read-write | current | Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be fr… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.34 | ScalaragCurCfgTelnetServerPort | read-only | current | The TCP port number that the telnet server listens for telnet sessions. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.35 | ScalaragNewCfgTelnetServerPort | read-write | current | The TCP port number that the telnet server listens for telnet sessions. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.36 | ScalaragClearFlashDump | read-write | current | This is an action object to clear the FLASH dump. ok(1) is returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.39 | ScalaragCurCfgTrapSrcIf | read-only | current | The SNMP trap source interface. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.40 | ScalaragNewCfgTrapSrcIf | read-write | current | The SNMP trap source interface. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.51 | ScalaragCurCfgTftpServerPort | read-only | current | The TCP port number that the TFTP server is listening to in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.52 | ScalaragNewCfgTftpServerPort | read-write | current | The TCP port number that the TFTP server is listening to in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.53 | ScalaragRackId | read-only | current | The rack unique identifier. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.54 | ScalaragChassis | read-only | current | Chassis serial number. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.55 | ScalaragCurTimeZone | read-only | current | The time zone. Note: Locations are alphabetically ordered and the corresponding code is not reflected in CLI. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.56 | ScalaragNewTimeZone | read-write | current | The time zone. Note: Locations are alphabetically ordered and the corresponding code is not reflected in CLI. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.57 | ScalaragCurCfgIdleCLITimeout | read-only | current | Set idle CLI sessions timeout. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.58 | ScalaragNewCfgIdleCLITimeout | read-write | current | Set idle CLI sessions timeout. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.72 | ScalaragCurCfgHprompt | read-only | current | Current status of hprompt. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.73 | ScalaragNewCfgHprompt | read-write | current | New status of hprompt. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.78 | ScalaragCurCfgLoginNotice | read-only | current | The user defined login notice. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.79 | ScalaragNewCfgLoginNotice | read-write | current | The user defined login notice. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.98 | ScalaragCurCfgSysCustomDstState | read-only | current | The current status of Custom DST |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.99 | ScalaragNewCfgSysCustomDstState | read-write | current | Enable/disable Custom DST |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.100 | ScalaragCurCfgSysCustomDstStart | read-only | current | The current Custom DST start rule |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.101 | ScalaragNewCfgSysCustomDstStart | read-write | current | Set Custom DST start rule |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.102 | ScalaragCurCfgSysCustomDstEnd | read-only | current | The current Custom DST end rule |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.103 | ScalaragNewCfgSysCustomDstEnd | read-write | current | Set Custom DST end rule |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.104 | ScalaragHavePanicDump | read-only | current | The presence of a panic dump in the flash memory. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.111 | ScalaragCurCfgResetControl | read-only | current | Current reset control state. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.112 | ScalaragNewCfgResetControl | read-write | current | Enable/disable reset control after panic. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.113 | ScalaragCurCfgSysDlight | read-only | current | Current daylight savings time status. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.114 | ScalaragNewCfgSysDlight | read-write | current | Enable/disable daylight savings time. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.115 | ScalaragCurCfgErrDisableRecovery | read-only | current | This object indicates whether the system will automatically re-enable an error-disabled port after the time interval indicated by agCurCfgErrDisableTimeout has… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.116 | ScalaragNewCfgErrDisableRecovery | read-write | current | This object specifies whether the system should automatically re-enable an error-disabled port. Use this object to change the global setting of the error-disab… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.117 | ScalaragCurCfgErrDisableTimeout | read-only | current | This object indicates the time, in seconds, that the system will wait before it automatically re-enables any port that is in error-disabled state. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.118 | ScalaragNewCfgErrDisableTimeout | read-write | current | This object specifies the time, in seconds, that the system should wait before it automatically re-enables a port that is in error-disabled state. Use this obj… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.119 | ScalaragCurCfgTelnetAccess | read-only | current | Current telnet access state. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.120 | ScalaragNewCfgTelnetAccess | read-write | current | Enable/disable telnet access. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.121 | ScalaragCurCfgDcbx | read-only | current | Current DCBX state. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.122 | ScalaragNewCfgDcbx | read-write | current | Enable/disable DCBX feature. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.127 | ScalarserverPortsCurCfgPorts | read-only | current | The current configured server port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ p… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.128 | ScalarserverPortsNewCfgPorts | read-only | current | New configuration server port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.129 | ScalarserverPortsNewCfgAddPort | read-create | current | The port to be added to the server ports list. A '0' value is returned when read. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.130 | ScalarserverPortsNewCfgRemovePort | read-create | current | The port to be removed from the server ports list. A '0' value is returned when read. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.133 | ScalaragNetboot | read-write | current | Ena/dis loading of config over n/w during bootup |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.134 | ScalaragNetbootTftpAddr | read-write | current | Tftp server address from where config file needs to be downloaded |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.135 | ScalaragNetbootCfgFile | read-write | current | Config file location on tftp server |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.139 | ScalaragCurServiceLED | read-only | current | Ena/dis Service Required LED |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.140 | ScalaragNewServiceLED | read-write | current | Ena/dis Service Required LED |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.166 | ScalaragCfgMtm | read-write | current | This object specifies the new value for MTM. The available MTM values are: 7159-DFX (1) 7159-DRX (2) 7159-HCM (3) 7159-HCK (4) 7120-64F (5) |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.177 | ScalaragNewSecurityMode | read-write | current | This is an action object to change switch security mode. There are thtree security modes for Lenovo switch: strict mode, compatibility mode and strict mode wit… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.178 | ScalaragNewCfgSslVersionLevel | read-write | current | New status of SSL Server Minimum Acceptable Protocol Version. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.179 | ScalaragCurCfgSslVersionLevel | read-only | current | Current status of SSL Server Minimum Acceptable Protocol Version. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.180 | ScalaragCurSecurityMode | read-only | current | This is an action object to change switch security mode. There are thtree security modes for Lenovo switch: strict mode, compatibility mode and strict mode wit… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.184 | TableagCurCfgTrapHostTable | not-accessible | current | The table of current trap hosts configure. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.184.1 | RowagCurCfgTrapHostEntry | not-accessible | current | A trap host configuration on the switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.184.1.1 | ColumnagCurCfgTrapHostIndex | read-only | current | The trap host index. Valid range is 1-16 |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.184.1.2 | ColumnagCurCfgTrapHostAddress | read-only | current | The trap host address. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.184.1.3 | ColumnagCurCfgTrapHostCommStr | read-only | current | The trap host community string. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.185 | TableagNewCfgTrapHostTable | not-accessible | current | The table for trap host definitions in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.185.1 | RowagNewCfgTrapHostEntry | not-accessible | current | A row in the trap host definition table |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.185.1.1 | ColumnagNewCfgTrapHostIndex | read-only | current | The trap host index. Valid range is 1-16 |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.185.1.2 | ColumnagNewCfgTrapHostAddress | read-create | current | The trap host address in the new configuration block. Setting IPv6 value is not supported in realease 7.9.x. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.185.1.3 | ColumnagNewCfgTrapHostCommStr | read-create | current | The trap host community string in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.185.1.4 | ColumnagNewCfgTrapHostDelete | read-create | current | By setting the value to delete(2), the entire row is deleted. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.186 | ScalaragStaggeredReloadDelay | read-write | current | Delay between each reload (in minutes). By default it is 1 minute. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.187 | ScalaragCurSysHostCert | read-only | current | Current Host Certificate |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.191 | ScalaragNewSecurityPolicy | read-write | current | The security policy that will take effect after the next boot. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.192 | ScalaragCurSecurityPolicy | read-only | current | The current security policy. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.1.193 | ScalaragSFTPEnable | read-write | current | In secure mode enable or disable sftp transfers. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2 | NodeagPortConfig | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.1 | ScalaragPortTableMaxEnt | read-only | current | The maximum number of rows in the port configuration host table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2 | TableagPortCurCfgTable | not-accessible | current | The table of port configuration in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1 | RowagPortCurCfgTableEntry | not-accessible | current | A row in the port table in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.1 | ColumnagPortCurCfgIndx | read-only | current | The index of the row in port configurations table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.2 | ColumnagPortCurCfgState | read-only | current | This is the state of the port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.3 | ColumnagPortCurCfgVlanTag | read-only | current | This is VLAN tag state of the port |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.5 | ColumnagPortCurCfgRmon | read-only | current | This object is used to turn RMON on or off on the port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.6 | ColumnagPortCurCfgPVID | read-only | current | The default VLAN ID for the port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.11 | ColumnagPortCurCfgGigEthAutoNeg | read-only | current | This object is used to turn the autonegotiation on or off for gigabit Ethernet connection. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.12 | ColumnagPortCurCfgGigEthFctl | read-only | current | This object is used to select port flow control for gigabit Ethernet connection. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.13 | ColumnagPortCurCfgPortName | read-only | current | The switch port name. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.16 | ColumnagPortCurCfgLinkTrap | read-only | current | Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which d… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.21 | ColumnagPortCurCfgGigEthSpeed | read-only | current | Selects the port speed for Gigabit Ethernet connection. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.22 | ColumnagPortCurCfgGigEthMode | read-only | current | This object is used to select port mode for Gigabit Ethernet connection. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.23 | ColumnagPortCurCfgDscpRemarking | read-only | current | Enable or disable Dscp remarking for the switch port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.24 | ColumnagPortCurCfgPortAlias | read-only | current | The switch port alias. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.25 | ColumnagPortCurCfgTagPVID | read-only | current | This is PVID tag state of the port |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.26 | ColumnagPortCurCfgLearning | read-only | current | Enable or disable L2 (FDB) Learning for the switch port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.29 | ColumnagPortCurCfgType | read-only | current | The switch port type. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.35 | ColumnagPortCurCfgErrDisableRecovery | read-only | current | This object indicates whether the system will automatically re-enable this port if it becomes error-disabled. This port will be re-enabled after the time inter… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.49 | ColumnagPortCurCfgTagiPVID | read-only | current | This is ingress PVID tag state of the port |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.60 | ColumnagPortCurCfgUcBw | read-only | current | Current value of unicast bandwidth |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.61 | ColumnagPortCurCfgPrivateVlanStatus | read-only | current | Current state of Private VLAN on this port |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.62 | ColumnagPortCurCfgMappedPrimaryVlans | read-only | current | Primary VLAN list mapped to port. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 8 || || || ||___ vlan 7 || |____ vlan 6 || . … |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.63 | ColumnagPortCurCfgAssociatedSecondaryVlans | read-only | current | Secondary VLAN list associated to port. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 8 || || || ||___ vlan 7 || |____ vlan 6… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.2.1.69 | ColumnagPortCurCfgSpeed1G | read-only | current | Limit the port to 1G speed |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3 | TableagPortNewCfgTable | not-accessible | current | The table of port configuration in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1 | RowagPortNewCfgTableEntry | not-accessible | current | A row in the port configuration table in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.1 | ColumnagPortNewCfgIndx | read-only | current | The index of the row in port configurations table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.2 | ColumnagPortNewCfgState | read-write | current | This is the state of the port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.3 | ColumnagPortNewCfgVlanTag | read-write | current | This is VLAN tag state of the port |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.5 | ColumnagPortNewCfgRmon | read-write | current | This object is used to turn RMON on or off on the port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.6 | ColumnagPortNewCfgPVID | read-write | current | The default VLAN ID for the port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.11 | ColumnagPortNewCfgGigEthAutoNeg | read-write | current | This object is used to turn the autonegotiation on or off for gigabit Ethernet connection. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.12 | ColumnagPortNewCfgGigEthFctl | read-write | current | This object is used to select port flow control for gigabit Ethernet connection. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.13 | ColumnagPortNewCfgPortName | read-write | current | The switch port name. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.16 | ColumnagPortNewCfgLinkTrap | read-write | current | Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which d… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.21 | ColumnagPortNewCfgGigEthSpeed | read-write | current | Selects the port speed for Gigabit Ethernet connection. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.22 | ColumnagPortNewCfgGigEthMode | read-write | current | This object is used to select port mode for Gigabit Ethernet connection. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.23 | ColumnagPortNewCfgDscpRemarking | read-write | current | Enable or disable Dscp remarking for the switch port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.25 | ColumnagPortNewCfgTagPVID | read-write | current | This is PVID tag state of the port |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.26 | ColumnagPortNewCfgLearning | read-write | current | Enable or disable L2 (FDB) Learning for the switch port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.29 | ColumnagPortNewCfgType | read-only | current | The switch port type. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.35 | ColumnagPortNewCfgErrDisableRecovery | read-write | current | This object specifies whether the system should automatically re-enable this port when it becomes error-disabled. Use this object to change the port-level sett… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.49 | ColumnagPortNewCfgTagiPVID | read-write | current | This is ingress PVID tag state of the port |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.60 | ColumnagPortNewCfgUcBw | read-write | current | Set port unicast bandwidth |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.61 | ColumnagPortNewCfgPrivateVlanStatus | read-write | current | Enable or disable the Private VLAN on this port |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.62 | ColumnagPortNewCfgMappedPrimaryVlans | read-only | current | Primary VLAN list mapped to port. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 8 || || || ||___ vlan 7 || |____ vlan 6 || . … |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.63 | ColumnagPortNewCfgAddPrimaryVlan | read-write | current | Adds the port to the specified primary VLAN. A '0' value is returned when read. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.64 | ColumnagPortNewCfgDelPrimaryVlan | read-write | current | Removes the port from the specified primary VLAN. A '0' value is returned when read. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.65 | ColumnagPortNewCfgAssociatedSecondaryVlans | read-only | current | Secondary VLAN list associated to port. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 8 || || || ||___ vlan 7 || |____ vlan 6… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.66 | ColumnagPortNewCfgAddSecondaryVlan | read-write | current | Adds the port to the specified secondary VLAN. A '0' value is returned when read. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.67 | ColumnagPortNewCfgDelSecondaryVlan | read-write | current | Removes the port from the secondary VLAN. A '0' value is returned when read. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.68 | ColumnagPortNewCfgPortAlias | read-only | current | The port alias. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.2.3.1.69 | ColumnagPortNewCfgSpeed1G | read-write | current | Limit the port to 1G speed |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3 | NodeagRadiusConfig | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.1 | ScalarradCurCfgPrimaryServer | read-only | current | The Hostname of the Primary RADIUS server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.2 | ScalarradNewCfgPrimaryServer | read-write | current | The Hostname of the Primary RADIUS server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.3 | ScalarradCurCfgSecondaryServer | read-only | current | The Hostname of the Secondary RADIUS server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.4 | ScalarradNewCfgSecondaryServer | read-write | current | The Hostname of the Secondary RADIUS server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.5 | ScalarradCurCfgPort | read-only | current | Specify the RADIUS port number for authentication. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.6 | ScalarradNewCfgPort | read-write | current | Specify the RADIUS port number for authentication. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.7 | ScalarradCurCfgTimeout | read-only | current | The maximum number of seconds before resending authentication to RADIUS server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.8 | ScalarradNewCfgTimeout | read-write | current | The maximum number of seconds before resending authentication to RADIUS server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.9 | ScalarradCurCfgRetries | read-only | current | Number of retries to the RADIUS server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.10 | ScalarradNewCfgRetries | read-write | current | Number of retries to the RADIUS server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.11 | ScalarradCurCfgState | read-only | current | Enable or disable RADIUS authentication. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.12 | ScalarradNewCfgState | read-write | current | Enable or disable RADIUS authentication. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.13 | ScalarradCurCfgAuthenString | read-only | current | The RADIUS authentication string. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.14 | ScalarradNewCfgAuthenString | read-write | current | The RADIUS authentication string. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.15 | ScalarradCurCfgLocal | read-only | current | Enable or disable RADIUS local for telnet/ssh/http/https. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.16 | ScalarradNewCfgLocal | read-write | current | Enable or disable RADIUS local for telnet/ssh/http/https. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.17 | ScalarradCurCfgAuthenSecondString | read-only | current | The second RADIUS authentication string. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.18 | ScalarradNewCfgAuthenSecondString | read-write | current | The second RADIUS authentication string. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.19 | ScalarradCurCfgSecBd | read-only | current | Enable or disable RADIUS secure local for telnet. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.20 | ScalarradNewCfgSecBd | read-write | current | Enable or disable RADIUS secure local for telnet. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.21 | ScalarradCurCfgPorttoUse | read-only | current | Specify whether the Radius should be performed over the data port or the management port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.22 | ScalarradNewCfgPorttoUse | read-write | current | Specify whether the Radius should be performed over the data port or the management port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.23 | ScalarradCurCfgSecPorttoUse | read-only | current | Specify whether the Radius should be performed over the data port or the management port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.3.24 | ScalarradNewCfgSecPorttoUse | read-write | current | Specify whether the Radius should be performed over the data port or the management port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4 | NodeagNTP | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.1 | ScalaragCurCfgNTPServer | read-only | current | The NTP Server Address. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.2 | ScalaragNewCfgNTPServer | read-write | current | The NTP Server Address. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.3 | ScalaragCurCfgNTPResyncInterval | read-only | current | The NTP Server resync interval in minutes. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.4 | ScalaragNewCfgNTPResyncInterval | read-write | current | The NTP Server resync interval in minutes. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.9 | ScalaragCurCfgNTPService | read-only | current | Enable/disable NTP Service. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.10 | ScalaragNewCfgNTPService | read-write | current | Enable/disable NTP Service. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.11 | ScalaragCurCfgNTPSecServer | read-only | current | The Secondary NTP Server Address. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.12 | ScalaragNewCfgNTPSecServer | read-write | current | The Secondary NTP Server Address. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.13 | ScalaragCurCfgNTPServerPort | read-only | current | Choose the port that the primary server is connected to. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.14 | ScalaragNewCfgNTPServerPort | read-write | current | Choose the port that the primary server is connected to. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.15 | ScalaragCurCfgNTPSecServerPort | read-only | current | Choose the port that the secondary server is connected to. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.16 | ScalaragNewCfgNTPSecServerPort | read-write | current | Choose the port that the secondary server is connected to. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.19 | ScalaragCurCfgNTPAuthState | read-only | current | NTP Authentication state. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.20 | ScalaragNewCfgNTPAuthState | read-write | current | NTP Authentication state. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.21 | ScalaragCurCfgNTPAuthPriKey | read-only | current | The NTP Authentication primary server key. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.22 | ScalaragNewCfgNTPAuthPriKey | read-write | current | The NTP Authentication primary server key. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.23 | ScalaragCurCfgNTPAuthSecKey | read-only | current | The NTP Authentication secondary server key. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.24 | ScalaragNewCfgNTPAuthSecKey | read-write | current | The NTP Authentication secondary server key. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.25 | ScalaragCurCfgNTPAuthTrKeys | read-only | current | The list of NTP Authentication trusted keys. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.26 | ScalaragNTPAuthAddTrKey | read-write | current | Add NTP Authentication trusted key. A '0' value is returned when read. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.27 | ScalaragNTPAuthRemTrKey | read-write | current | Remove NTP Authentication trusted key. A '0' value is returned when read. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.28 | TablentpCurCfgMdkeyTable | not-accessible | current | The table of NTP MD5/SHA-1 keys in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.28.1 | RowntpCurCfgMdkeyEntry | not-accessible | current | Information about an NTP MD5/SHA-1 keys table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.28.1.1 | ColumnntpCurCfgMdkeyIndex | read-only | current | The NTP MD5/SHA-1 Key number for which the NTP MdKey table is related. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.28.1.2 | ColumnntpCurCfgMdkeyKey | read-only | current | The character string representing the MD5/SHA-1 Key. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.28.1.3 | ColumnntpCurCfgKeyType | read-only | current | The NTP Key type,0: MD5, 1: SHA-1. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.29 | TablentpNewCfgMdkeyTable | not-accessible | current | The table of NTP MD5/SHA-1 keys in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.29.1 | RowntpNewCfgMdkeyEntry | not-accessible | current | Information about an NTP MD5/SHA-1 keys table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.29.1.1 | ColumnntpNewCfgMdkeyIndex | read-only | current | The NTP MD5/SHA-1 Key number for which the NTP MdKey table is related. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.29.1.2 | ColumnntpNewCfgMdkeyKey | read-create | current | The character string representing the MD5/SHA-1 Key. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.29.1.3 | ColumnntpNewCfgMdkeyDelete | read-create | current | When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.4.29.1.4 | ColumnntpNewCfgKeyType | read-create | current | The NTP key type. 0: MD5, 1: SHA-1. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5 | NodeagSyslog | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.1 | ScalaragCurCfgSyslogHost | read-only | current | The syslog host IP address in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.2 | ScalaragNewCfgSyslogHost | read-write | current | The syslog host IP address in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.3 | ScalaragCurCfgSyslog2Host | read-only | current | The second syslog host IP address in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.4 | ScalaragNewCfgSyslog2Host | read-write | current | The second syslog host IP address in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.5 | ScalaragCurCfgSyslogFac | read-only | current | The facility level of syslog host in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.6 | ScalaragNewCfgSyslogFac | read-write | current | The facility level of syslog host in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.7 | ScalaragCurCfgSyslog2Fac | read-only | current | The facility level of second syslog host in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.8 | ScalaragNewCfgSyslog2Fac | read-write | current | The facility level of second syslog host in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.9 | ScalaragClrSyslogMsgs | read-write | current | Clears all current Syslog messages. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.10 | ScalaragSyslogMsgTableMaxSize | read-only | current | The maximum number of rows in the syslog message table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.11 | TableagSyslogMsgTable | not-accessible | current | The table of syslog messages. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.11.1 | RowagSyslogMsgTableEntry | not-accessible | current | A syslog message stored on the switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.11.1.1 | ColumnagSyslogMsgIndex | read-only | current | The syslog message table index. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.11.1.2 | ColumnagSyslogMessage | read-only | current | The syslog message. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12 | NodeagLog | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.1 | ScalaragNewCfgSyslogTrapConsole | read-write | current | Enable or disable console syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.2 | ScalaragCurCfgSyslogTrapConsole | read-only | current | Enable or disable console syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.3 | ScalaragNewCfgSyslogTrapSystem | read-write | current | Enable or disable system level syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.4 | ScalaragCurCfgSyslogTrapSystem | read-only | current | Enable or disable system level syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.5 | ScalaragNewCfgSyslogTrapMgmt | read-write | current | Enable or disable management(flash, config, login) syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.6 | ScalaragCurCfgSyslogTrapMgmt | read-only | current | Enable or disable management(flash, config, login) syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.7 | ScalaragNewCfgSyslogTrapCli | read-write | current | Enable or disable CLI generated error syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.8 | ScalaragCurCfgSyslogTrapCli | read-only | current | Enable or disable CLI generated error syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.11 | ScalaragNewCfgSyslogTrapVlan | read-write | current | Enable or disable VLAN syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.12 | ScalaragCurCfgSyslogTrapVlan | read-only | current | Enable or disable VLAN syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.19 | ScalaragNewCfgSyslogTrapSsh | read-write | current | Enable or disable SSH, RADIUS syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.20 | ScalaragCurCfgSyslogTrapSsh | read-only | current | Enable or disable SSH, RADIUS syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.25 | ScalaragNewCfgSyslogTrapNtp | read-write | current | Enable or disable NTP syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.26 | ScalaragCurCfgSyslogTrapNtp | read-only | current | Enable or disable NTP syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.31 | ScalaragNewCfgSyslogTrapIp | read-write | current | Enable or disable IP related syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.32 | ScalaragCurCfgSyslogTrapIp | read-only | current | Enable or disable IP related syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.45 | ScalaragNewCfgSyslogTrapRmon | read-write | current | Enable or disable RMON related syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.46 | ScalaragCurCfgSyslogTrapRmon | read-only | current | Enable or disable RMON related syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.53 | ScalaragNewCfgSyslogTrapCfg | read-write | current | Enable or disable CFG related syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.54 | ScalaragCurCfgSyslogTrapCfg | read-only | current | Enable or disable CFG related syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.55 | ScalaragNewCfgSyslogTrapServer | read-write | current | Enable or disable Server related syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.56 | ScalaragCurCfgSyslogTrapServer | read-only | current | Enable or disable Server related syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.61 | ScalaragNewCfgSyslogTrapHotlinks | read-write | current | Enable or disable Hot Links related syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.62 | ScalaragCurCfgSyslogTrapHotlinks | read-only | current | Enable or disable Hot Links related syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.63 | ScalaragNewCfgSyslogTrapLldp | read-write | current | Enable or disable LLDP related syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.64 | ScalaragCurCfgSyslogTrapLldp | read-only | current | Enable or disable LLDP related syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.65 | ScalaragNewCfgSyslogTrapAll | read-write | current | Enable or disable all syslog and SNMP traps in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.66 | ScalaragCurCfgSyslogTrapAll | read-only | current | Enable or disable all syslog and SNMP traps, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.67 | ScalaragNewCfgSyslogTrapIpv6 | read-write | current | Enable or disable IPv6 related syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.68 | ScalaragCurCfgSyslogTrapIpv6 | read-only | current | Enable or disable IPv6 related syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.69 | ScalaragNewCfgSyslogTrapFabric | read-write | current | Enable or disable Fabric related syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.70 | ScalaragCurCfgSyslogTrapFabric | read-only | current | Enable or disable Fabric related syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.71 | ScalaragNewCfgSyslogTrapTftp | read-write | current | Enable or disable TFTP related syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.72 | ScalaragCurCfgSyslogTrapTftp | read-only | current | Enable or disable TFTP related syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.73 | ScalaragNewCfgSyslogTrapFailover | read-write | current | Enable or disable failover related syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.74 | ScalaragCurCfgSyslogTrapFailover | read-only | current | Enable or disable failover related syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.77 | ScalaragNewCfgSyslogTrapLacp | read-write | current | Enable or disable LACP syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.78 | ScalaragCurCfgSyslogTrapLacp | read-only | current | Enable or disable LACP syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.79 | ScalaragNewCfgSyslogTrapLink | read-write | current | Enable or disable all syslog and SNMP traps, in link up/down. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.80 | ScalaragCurCfgSyslogTrapLink | read-only | current | Enable or disable all syslog and SNMP traps, as currently configured in link up/down. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.85 | ScalaragNewCfgSyslogTrapDcbx | read-write | current | Enable or disable all DCBX-related syslog and SNMP traps. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.86 | ScalaragCurCfgSyslogTrapDcbx | read-only | current | Enable or disable all DCBX-related syslog and SNMP traps. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.87 | ScalaragNewCfgSyslogTrapFcoe | read-write | current | Enable or disable all FCOE-related syslog and SNMP traps. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.88 | ScalaragCurCfgSyslogTrapFcoe | read-only | current | Enable or disable all FCOE-related syslog and SNMP traps. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.89 | ScalaragNewCfgSyslogTrapVm | read-write | current | Enable or disable all VM-related syslog and SNMP traps. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.90 | ScalaragCurCfgSyslogTrapVm | read-only | current | Enable or disable all VM-related syslog and SNMP traps. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.93 | ScalaragNewCfgSyslogTrapCfgchg | read-write | current | Enable or disable configuration change related syslog and SNMP trap in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.94 | ScalaragCurCfgSyslogTrapCfgchg | read-only | current | Enable or disable configuration change related syslog and SNMP trap, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.97 | ScalaragNewCfgSyslogTrapUfp | read-write | current | Enable or disable all UFP-related syslog and SNMP traps. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.98 | ScalaragCurCfgSyslogTrapUfp | read-only | current | Enable or disable all UFP-related syslog and SNMP traps. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.99 | ScalaragNewCfgSyslogTrapIgmpGroup | read-write | current | Enable or disable all IGMP GROUP-related syslog and SNMP traps. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.100 | ScalaragCurCfgSyslogTrapIgmpGroup | read-only | current | Enable or disable all IGMP GROUP-related syslog and SNMP traps. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.101 | ScalaragNewCfgSyslogTrapIgmpMrouter | read-write | current | Enable or disable all IGMP MROUTER-related syslog and SNMP traps. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.102 | ScalaragCurCfgSyslogTrapIgmpMrouter | read-only | current | Enable or disable all IGMP MROUTER-related syslog and SNMP traps. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.107 | ScalaragNewCfgSyslogTrapPrivateVlan | read-write | current | Enable or disable all Private VLAN-related syslog and SNMP traps, as configured in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.108 | ScalaragCurCfgSyslogTrapPrivateVlan | read-only | current | Enable or disable all Private VLAN-related syslog and SNMP traps, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.109 | ScalaragNewCfgSyslogTrapSlp | read-write | current | Enable or disable all SLP-related syslog and SNMP traps, as configured in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.12.110 | ScalaragCurCfgSyslogTrapSlp | read-only | current | Enable or disable all SLP-related syslog and SNMP traps, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.13 | ScalaragCurCfgSyslogSev | read-only | current | The severity of syslog host in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.14 | ScalaragNewCfgSyslogSev | read-write | current | The severity of syslog host in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.15 | ScalaragCurCfgSyslog2Sev | read-only | current | The severity of syslog2 host in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.16 | ScalaragNewCfgSyslog2Sev | read-write | current | The severity of syslogs host in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.17 | ScalaragCurCfgSyslogHostPort | read-only | current | Choose the port that the primary Syslog server is connected to. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.18 | ScalaragNewCfgSyslogHostPort | read-write | current | Choose the port that the primary Syslog server is connected to. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.19 | ScalaragCurCfgSyslog2HostPort | read-only | current | Choose the port that the secondary Syslog server is connected to. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.20 | ScalaragNewCfgSyslog2HostPort | read-write | current | Choose the port that the secondary Syslog server is connected to. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.23 | ScalaragCurCfgSyslogConsoleSev | read-only | current | The severity of syslogs console in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.24 | ScalaragNewCfgSyslogConsoleSev | read-write | current | The severity of syslogs console in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.25 | ScalaragCurCfgSyslogFlashSev | read-only | current | The severity of syslogs flash in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.26 | ScalaragNewCfgSyslogFlashSev | read-write | current | The severity of syslogs flash in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.30 | TableagSyslogMsgTableFabric | not-accessible | current | The table of syslog messages. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.30.1 | RowagSyslogMsgTableEntryRev | not-accessible | current | A syslog message stored on the switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.30.1.1 | ColumnagSyslogSwitchNumber | read-only | current | The configured switch number of any switch, which is part of the node. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.30.1.2 | ColumnagSyslogMsgIndexRev | read-only | current | The syslog message table index. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.5.30.1.3 | ColumnagSyslogMessageRev | read-only | current | The syslog message. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7 | NodeagTransfer | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.1 | ScalaragTransferServer | read-write | current | The FTP/TFTP server IP address or domain name. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.2 | ScalaragTransferImage | read-write | current | Where the image file should be loaded in flash. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.3 | ScalaragTransferImageFileName | read-write | current | The image file name to be transferred. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.4 | ScalaragTransferCfgFileName | read-write | current | The configuration file name. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.5 | ScalaragTransferDumpFileName | read-write | current | The core dump file name. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.6 | ScalaragTransferAction | read-write | current | This is an action object to perform various FTP/TFTP Get or Put functions. The FTP/TFTP sever is specified in agTransferServer object. img-get(2) - Download sw… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.7 | ScalaragTransferLastActionStatus | read-only | current | The recorded status of the previous FTP/TFTP activity. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.8 | ScalaragTransferPort | read-write | current | Specify whether the FTP/TFTP operation should be performed over the data port or the management port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.9 | ScalaragTransferUserName | read-write | current | The username for the FTP server or blank for TFTP server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.10 | ScalaragTransferPassword | read-write | current | The password for the FTP server. For security reason, an empty string will be returned when the OID is read. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.11 | ScalaragTransferTSDumpFileName | read-write | current | The TS dump file name. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.14 | ScalaragTransferLastConfigurationActionStatus | read-only | current | The status of the last configuration action using the file ftp/tftp'd from server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.15 | ScalaragTransferCaFileName | read-write | current | The CA certificate file name. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.16 | ScalaragTransferHostCertFileName | read-write | current | The Host certificate file name. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.17 | ScalaragTransferHostKeyFileName | read-write | current | The Host private key file name. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.18 | ScalaragTransferProtocol | read-write | current | The protocol used by this transfer. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.19 | ScalaragServerPort | read-write | current | The port is listened on the server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.20 | ScalaragSIFabricMode | read-write | current | Set mode to SI Fabric image. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.21 | ScalaragTransferPublicKeyUserName | read-write | current | The user of the public key file. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.22 | ScalaragTransferPublicKeyFileName | read-write | current | The client pulic key file name. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.23 | ScalaragTransferStaggeredUpgradeMode | read-write | current | Upgrade image with staggered mode |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.24 | ScalaragTransferTargetSwitchNumber | read-write | current | Attached switch number to which the image will be transfered to. 0 is the default value = the image will be sent to the entire fabric. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.25 | ScalaragTransferStaggeredUpgradeDelay | read-write | current | Delay between each reload of upgraded switch (in minutes). By default it is 1 minute. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.7.26 | ScalaragTransferCSRFileName | read-write | current | The CSR file name . |
| 1.3.6.1.4.1.20301.2.7.21.1.1.8 | NodeagApply | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.8.1 | ScalaragApplyPending | read-only | current | This object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user t… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.8.2 | ScalaragApplyConfig | read-write | current | When this object is read the current state is returned. idle(2) indicates that there is no apply in progess. complete(4) indicates that the last apply operatio… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.8.4 | ScalaragApplyTableSize | read-only | current | The number of strings in the apply table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.8.5 | TableagApplyTable | not-accessible | current | The table of failure reasons for an apply of current configuration block changes. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.8.5.1 | RowagApplyTableEntry | not-accessible | current | A row in the table of failure reasons for an apply (information about a particular reason of failure). |
| 1.3.6.1.4.1.20301.2.7.21.1.1.8.5.1.1 | ColumnagApplyIndex | read-only | current | The table index. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.8.5.1.2 | ColumnagApplyString | read-only | current | A string in the apply table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11 | NodeagTacacsConfig | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.1 | ScalartacCurCfgPrimaryServer | read-only | current | The Hostname of the Primary TACACS+ server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.2 | ScalartacNewCfgPrimaryServer | read-write | current | The Hostname of the Primary TACACS+ server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.3 | ScalartacCurCfgSecondaryServer | read-only | current | The Hostname of the Secondary TACACS+ server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.4 | ScalartacNewCfgSecondaryServer | read-write | current | The Hostname of the Secondary TACACS+ server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.5 | ScalartacCurCfgPort | read-only | current | Specify the TACACS+ port number. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.6 | ScalartacNewCfgPort | read-write | current | Specify the TACACS+ port number. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.7 | ScalartacCurCfgTimeout | read-only | current | The maximum number of seconds before resending authentication to TACACS+ server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.8 | ScalartacNewCfgTimeout | read-write | current | The maximum number of seconds before resending authentication to TACACS+ server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.9 | ScalartacCurCfgRetries | read-only | current | Number of retries to the TACACS+ server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.10 | ScalartacNewCfgRetries | read-write | current | Number of retries to the TACACS+ server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.11 | ScalartacCurCfgState | read-only | current | Enable or disable TACACS+ authentication. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.12 | ScalartacNewCfgState | read-write | current | Enable or disable TACACS+ authentication. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.13 | ScalartacCurCfgAuthenString | read-only | current | The TACACS+ authentication string. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.14 | ScalartacNewCfgAuthenString | read-write | current | The TACACS+ authentication string. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.15 | ScalartacCurCfgLocal | read-only | current | Enable or disable TACACS+ local for telnet/ssh/http/https. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.16 | ScalartacNewCfgLocal | read-write | current | Enable or disable TACACS+ local for telnet/ssh/http/https. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.17 | ScalartacCurCfgAuthenSecondString | read-only | current | The second TACACS+ authentication string. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.18 | ScalartacNewCfgAuthenSecondString | read-write | current | The second TACACS+ authentication string. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.19 | ScalartacCurCfgCmdAuthor | read-only | current | Enable or disable TACACS+ command authorization. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.20 | ScalartacNewCfgCmdAuthor | read-write | current | Enable or disable TACACS+ command authorization. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.21 | ScalartacCurCfgCmdLogging | read-only | current | Enable or disable TACACS+ command logging. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.22 | ScalartacNewCfgCmdLogging | read-write | current | Enable or disable TACACS+ command logging. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.23 | ScalartacCurCfgSecBd | read-only | current | Enable or disable TACACS+ secure local for telnet. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.24 | ScalartacNewCfgSecBd | read-write | current | Enable or disable TACACS+ secure local for telnet. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.25 | ScalartacCurCfgCmap | read-only | current | Enable/Disable Tacacs+ new privilege level mapping, as configured in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.26 | ScalartacNewCfgCmap | read-write | current | Enable/Disable Tacacs+ new privilege level mapping. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.29 | ScalartacCurCfgEnaPassChange | read-only | current | Enable/Disable Tacacs+ password change. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.30 | ScalartacNewCfgEnaPassChange | read-write | current | Enable/Disable Tacacs+ password change. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.31 | ScalartacChangePassForUser | read-write | current | The username for changing server password. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.32 | ScalartacChangePassCurPass | read-only | current | The current password for tacacs server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.33 | ScalartacChangePassNewPass | read-write | current | The new password for tacacs server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.34 | ScalartacChangePassForServer | read-write | current | Change password for <1/2> Tacacs+ server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.35 | ScalartacCurCfgPorttoUse | read-only | current | Specify whether the Tacacs should be performed over the data port or the management port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.36 | ScalartacNewCfgPorttoUse | read-write | current | Specify whether the Tacacs should be performed over the data port or the management port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.37 | ScalartacCurCfgSecPorttoUse | read-only | current | Specify whether the Tacacs should be performed over the data port or the management port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.38 | ScalartacNewCfgSecPorttoUse | read-write | current | Specify whether the Tacacs should be performed over the data port or the management port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.39 | TableagTacacsUserMapCurCfgTable | not-accessible | current | The table of tacacs+ user map current configuration. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.39.1 | RowagTacacsUserMapCurCfgTableEntry | not-accessible | current | A row in the tacacs+ user mapping table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.39.1.1 | ColumnagTacacsUserMapCurCfgUId | read-only | current | The current config remote privilege identifier. The identifier value corresponds to the remote privilege. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.39.1.2 | ColumnagTacacsUserMapCurCfgMapping | read-only | current | Current Tacacs+ user privilege mappings. The correspondence between the local privilege and the remote privilege is: - The remote privilege is the privilege id… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.40 | TableagTacacsUserMapNewCfgTable | not-accessible | current | The table of tacacs+ user map new configuration. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.40.1 | RowagTacacsUserMapNewCfgTableEntry | not-accessible | current | A row in the tacacs+ user mapping table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.40.1.1 | ColumnagTacacsUserMapNewCfgUId | read-only | current | The new config remote privilege identifier. The identifier value corresponds to the remote privilege. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.40.1.2 | ColumnagTacacsUserMapNewCfgMapping | read-create | current | Set new Tacacs+ user privilege mappings. The correspondence between the local privilege and the remote privilege is: - The remote privilege is the privilege id… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.41 | ScalartacNewCfgDirectedRequest | read-write | current | Enable/Disable tacacs directed request. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.42 | ScalartacCurCfgDirectedRequest | read-only | current | The current tacacs directed request state. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.43 | ScalartacCurCfgAttempts | read-only | current | Number of login attempts to the TACACS+ server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.44 | ScalartacNewCfgAttempts | read-write | current | Number of login attempts to the TACACS+ server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.45 | ScalartacCurBypassEnable | read-only | current | Status of the enable bypass.If the status of this object is enabled, user authenticated via TACACS+ with admin previllage is granted enable previllage access.I… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.46 | ScalartacNewBypassEnable | read-write | current | Status of the enable bypass.If the status of this object is enabled, user authenticated via TACACS+ with admin previllage is granted enable previllage access.I… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.47 | ScalartacCurCfgEnableAccounting | read-only | current | Current TACACS+ accounting state. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.11.48 | ScalartacNewCfgEnableAccounting | read-write | current | Enable/Disable TACACS+ accounting. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.12 | NodeagMgmtNetConfig | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.12.1 | ScalaragMgmtNetTableMaxSize | read-only | current | The maximum number of entries in the Management Network Table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.12.2 | TableagCurCfgMgmtNetTable | not-accessible | current | The table for Management Network definitions in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.12.2.1 | RowagCurCfgMgmtNetEntry | not-accessible | current | A row in the management network definition table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.12.2.1.1 | ColumnagCurCfgMgmtNetIndex | read-only | current | The index of the Management Network Definition table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.12.2.1.2 | ColumnagCurCfgMgmtNetSubnet | read-only | current | The Management Network Address in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.12.2.1.3 | ColumnagCurCfgMgmtNetMask | read-only | current | The Management Network Mask/Prefix Length in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.12.3 | TableagNewCfgMgmtNetTable | not-accessible | current | The table for Management Network definitions in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.12.3.1 | RowagNewCfgMgmtNetEntry | not-accessible | current | A row in the management network definition table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.12.3.1.1 | ColumnagNewCfgMgmtNetIndex | read-only | current | The index of the Management Network Definition table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.12.3.1.2 | ColumnagNewCfgMgmtNetSubnet | read-create | current | The Management Network Address in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.12.3.1.3 | ColumnagNewCfgMgmtNetMask | read-create | current | The Management Network Mask/Prefix length in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.12.3.1.4 | ColumnagNewCfgMgmtNetDelete | read-create | current | By setting the value to delete(2), the entire row is deleted. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.12.4 | ScalaragMgmtNetClear | read-write | current | By setting the value to delete(2), the entire table is cleared. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.13 | NodeagBoot | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.13.1 | ScalaragCfgBootResetParameters | read-write | current | String formatated as 'weekday hour minute' where - weekday is none(0),sunday(1),monday(2), tuesday(3),wednesday(4),thursday(5),friday(6), saturday(7) - hour is… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.13.4 | ScalaragCfgBootReset | read-write | current | Cancel pending switch reset. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.13.5 | ScalaragCfgBootNxtResetTime | read-only | current | Display the next scheduled reboot time. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.13.6 | ScalaragCfgBootPendingReset | read-only | current | Shows if there is any pending reboot scheduled. You should cancel any pending reboot scheduled before setting another. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.13.7 | TableagCfgBootCurTable | not-accessible | current | The table of currently booted settings for the switches. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.13.7.1 | RowagCfgBootCurEntry | not-accessible | current | Currently booted settings for a switches. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.13.7.1.1 | ColumnagCfgBootCurSwNumIndx | read-only | current | The number of the configured switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.13.7.1.2 | ColumnagCfgBootCurMTM | read-only | current | This object specifies the current value for MTM. The available MTM values are: 1455-64F (1) 7309-DFX (2) 7309-DRX (3) 7309-HCM (4) 7309-HCK (5) |
| 1.3.6.1.4.1.20301.2.7.21.1.1.13.7.1.3 | ColumnagCfgBootCurESN | read-only | current | The current ESN of the switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.13.8 | TableagCfgBootNewTable | not-accessible | current | The table of the current booted settings saved for the next reboot. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.13.8.1 | RowagCfgBootNewEntry | not-accessible | current | Current booted settings saved for the next reboot. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.13.8.1.1 | ColumnagCfgBootNewSwNumIndx | read-only | current | The number of the configured switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.13.8.1.2 | ColumnagCfgBootNewMTM | read-write | current | This object specifies the current value for MTM. The available MTM values are: 1455-64F (1) 7309-DFX (2) 7309-DRX (3) 7309-HCM (4) 7309-HCK (5) |
| 1.3.6.1.4.1.20301.2.7.21.1.1.13.8.1.3 | ColumnagCfgBootNewESN | read-write | current | Configure the ESN of the switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19 | NodeagAccess | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.1 | ScalaragAccessUserMaxUserID | read-only | current | The maximum number of User IDs. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.2 | TableagAccessUserCurCfgTable | not-accessible | current | The table of Access user configuration. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.2.1 | RowagAccessUserCurCfgTableEntry | not-accessible | current | A row in the Access user configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.2.1.1 | ColumnagAccessUserCurCfgUId | read-only | current | The User identifier. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.2.1.2 | ColumnagAccessUserCurCos | read-only | current | The user class of service. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.2.1.3 | ColumnagAccessUserCurCfgName | read-only | current | The user name. Please note, the max length is 8 in fabric mode. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.2.1.4 | ColumnagAccessUserCurCfgPswd | read-only | current | The character string representing the user password. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.2.1.6 | ColumnagAccessUserCurCfgState | read-only | current | User validation (enabled or disabled) in current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.3 | TableagAccessUserNewCfgTable | not-accessible | current | The table of Access user configuration. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1 | RowagAccessUserNewCfgTableEntry | not-accessible | current | A row in the Access user configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1.1 | ColumnagAccessUserNewCfgUId | read-only | current | The User identifier. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1.2 | ColumnagAccessUserNewCos | read-create | current | The user class of service. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1.3 | ColumnagAccessUserNewCfgName | read-create | current | The user name. Please note, the max length is 8 in fabric mode. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1.4 | ColumnagAccessUserNewCfgPswd | read-create | current | The character string representing the user password. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1.7 | ColumnagAccessUserNewCfgState | read-create | current | User validation (enabled or disabled) in new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.3.1.8 | ColumnagAccessUserNewCfgDelete | read-create | current | This is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.4 | ScalaragAccessCurStrongPassword | read-only | current | Status of strong password. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.5 | ScalaragAccessNewStrongPassword | read-write | current | Setting this value to enabled(1) enables strong password support, while disabled(0) disables it. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.6 | ScalaragAccessCurStrongPassValidity | read-only | current | Password validity in days. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.7 | ScalaragAccessNewStrongPassValidity | read-write | current | Get or set password validity in days. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.8 | ScalaragAccessCurStrongPassWarning | read-only | current | Warning days before password expires. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.9 | ScalaragAccessNewStrongPassWarning | read-write | current | Get or set warning days before password expires. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.10 | ScalaragAccessCurStrongPassFailLog | read-only | current | Number of failed logins that trigger security notifications. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.11 | ScalaragAccessNewStrongPassFailLog | read-write | current | Get or set number of failed logins that trigger security notifications. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.12 | ScalaragAccessCurDefaultAdmin | read-only | current | Get default admin account state. (1) indicates enabled and (0) indicates disabled (0). Default it is enabled. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.13 | ScalaragAccessNewDefaultAdmin | read-write | current | Setting this value to enabled (1) will enable the default admin account while disabled (0) will disable the default admin account. Default it is enabled. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.14 | ScalaragAccessCurStrongPassLockout | read-only | current | Status of Lockout |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.15 | ScalaragAccessNewStrongPassLockout | read-write | current | Setting this value to enabled (1) enables account locking after trying for failed login attempts. While disabled (0) disables account locking. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.16 | ScalaragAccessCurStrongPassAttemptsMaxFail | read-only | current | The max number of failed logins before disabling account. Default value is 6 |
| 1.3.6.1.4.1.20301.2.7.21.1.1.19.17 | ScalaragAccessNewStrongPassAttemptsMaxFail | read-write | current | Sets Max number of failed logins before disabling account. Default value is 6 |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21 | NodeagLdapConfig | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.1 | ScalarldapCurCfgPrimaryIpAddr | read-only | current | The IP address of the Primary LDAP server,it can be an ipv4 or ipv6 address. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.2 | ScalarldapNewCfgPrimaryIpAddr | read-write | current | The IP address of the Primary LDAP server,it can be an ipv4 or ipv6 address. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.3 | ScalarldapCurCfgSecondaryIpAddr | read-only | current | The IP address of the Secondary LDAP server,it can be an ipv4 or ipv6 address. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.4 | ScalarldapNewCfgSecondaryIpAddr | read-write | current | The IP address of the Secondary LDAP server,it can be an ipv4 or ipv6 address. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.5 | ScalarldapCurCfgPort | read-only | current | Specify the LDAP port number. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.6 | ScalarldapNewCfgPort | read-write | current | Specify the LDAP port number. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.7 | ScalarldapCurCfgRetries | read-only | current | Number of retries to the LDAP server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.8 | ScalarldapNewCfgRetries | read-write | current | Number of retries to the LDAP server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.9 | ScalarldapCurCfgTimeout | read-only | current | The maximum number of seconds before resending authentication to LDAP server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.10 | ScalarldapNewCfgTimeout | read-write | current | The maximum number of seconds before resending authentication to LDAP server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.11 | ScalarldapCurCfgDomain | read-only | current | The LDAP domain name. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.12 | ScalarldapNewCfgDomain | read-write | current | The LDAP domain name. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.13 | ScalarldapCurCfgLocal | read-only | current | Enable or disable LDAP local for telnet/ssh/http/https. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.14 | ScalarldapNewCfgLocal | read-write | current | Enable or disable LDAP local for telnet/ssh/http/https. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.15 | ScalarldapCurCfgState | read-only | current | Enable or disable LDAP authentication. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.16 | ScalarldapNewCfgState | read-write | current | Enable or disable LDAP authentication. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.17 | ScalarldapCurCfgPorttoUse | read-only | current | Specify whether the LDAP should be performed over the data port or the management port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.18 | ScalarldapNewCfgPorttoUse | read-write | current | Specify whether the LDAP should be performed over the data port or the management port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.19 | ScalarldapCurCfgSecPorttoUse | read-only | current | Specify whether the LDAP should be performed over the data port or the management port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.20 | ScalarldapNewCfgSecPorttoUse | read-write | current | Specify whether the LDAP should be performed over the data port or the management port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.21 | ScalarldapCurCfgUserNameAttribute | read-only | current | The LDAP username attribute. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.22 | ScalarldapNewCfgUserNameAttribute | read-write | current | The LDAP username attribute (default = uid). |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.30 | ScalarldapCurCfgGroupAttribute | read-only | current | The LDAP group attribute. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.31 | ScalarldapNewCfgGroupAttribute | read-write | current | LDAP group attribute (default=memberOf). |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.32 | ScalarldapCurCfgLoginAttribute | read-only | current | The LDAP login attribute. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.33 | ScalarldapNewCfgLoginAttribute | read-write | current | LDAP login permission attribute (default=ibm-chassisRole). |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.34 | ScalarldapCurCfgBaseDN | read-only | current | The LDAP base DN name . |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.35 | ScalarldapNewCfgBaseDN | read-write | current | The LDAP base DN name. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.36 | ScalarldapCurCfgBindmode | read-only | current | Current LDAP bind mode: login: use login creds for binding pre-config: use binddn creds for binding sasl: use SASL(Simple Authentication and Secure Layer) EXTE… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.37 | ScalarldapNewCfgBindmode | read-write | current | Set LDAP bind mode: login: use login creds for binding pre-config: use binddn creds for binding sasl: use SASL(Simple Authentication and Secure Layer) EXTERNAL |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.38 | ScalarldapCurCfgBindDNdn | read-only | current | Current DN for binding with LDAP server (eg., cn=Manager,dc=my-domain,dc=com). |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.39 | ScalarldapNewCfgBindDNdn | read-write | current | Set DN for binding with LDAP server (eg., cn=Manager,dc=my-domain,dc=com). |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.40 | ScalarldapCurCfgBindDNekey | read-only | current | Current encrypted password for the DN. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.41 | ScalarldapNewCfgBindDNekey | read-write | current | Set the encrypted password for the DN. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.42 | ScalarldapCurCfgBindDNkey | read-only | current | Current password for DN. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.43 | ScalarldapNewCfgBindDNkey | read-write | current | Set the password for DN. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.44 | ScalarldapCurCfgGroupFilter | read-only | current | Current LDAP group filter. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.45 | ScalarldapNewCfgGroupFilter | read-write | current | Set the LDAP group filter. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.46 | TableldapHostCurConfigTable | not-accessible | current | The table for user specified host. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.46.1 | RowldapHostCurConfigTableEntry | not-accessible | current | A row in the user specified host table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.46.1.1 | ColumnldapHostCurConfigIndex | read-only | current | The index of the user specified host table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.46.1.2 | ColumnldapHostCurAddr | read-only | current | Specify the group addr. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.46.1.3 | ColumnldapHostCurPort | read-only | current | Specify the group port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.46.1.4 | ColumnldapHostCurPortType | read-only | current | Specify the host port type. data-port: Data port mgt-port: Management port |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.47 | TableldapHostNewConfigTable | not-accessible | current | The table for user specified host. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.47.1 | RowldapHostNewConfigTableEntry | not-accessible | current | A row in the user specified host table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.47.1.1 | ColumnldapHostNewConfigIndex | read-only | current | The index of the user specified host table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.47.1.2 | ColumnldapHostNewAddr | read-create | current | Specify the group addr. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.47.1.3 | ColumnldapHostNewPort | read-create | current | Specify the host port. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.47.1.4 | ColumnldapHostNewPortType | read-create | current | Specify the host port type. data-port: Data port mgt-port: Management port |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.47.1.5 | ColumnldapHostNewCfgDelete | read-create | current | This is an action object to create or delete a host. other(1) is returned always when read. The following values are writable: delete(2)...to delete a host |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.48 | ScalarldapCurCfgMode | read-only | current | Current LDAP mode: legacy: legacy mode enhanced: enhanced mode |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.49 | ScalarldapNewCfgMode | read-write | current | Set LDAP mode: legacy: set LDAP to legacy mode enhanced: set LDAP to enhanced mode |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.50 | ScalarldapCurCfgSecuritymode | read-only | current | Current LDAP transmit mode and security options: clear: Cleartext mode starttls: Secure LDAP via StartTLS operation w/o cleartext fallback ldaps: Secure LDAP v… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.51 | ScalarldapNewCfgSecuritymode | read-write | current | Set LDAP transmit mode and security options: clear: Cleartext mode starttls: Secure LDAP via StartTLS operation w/o cleartext fallback ldaps: Secure LDAP via L… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.52 | ScalarldapCurCfgMutual | read-only | current | Enable or disable mutual authentication in TLS. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.53 | ScalarldapNewCfgMutual | read-write | current | Enable or disable mutual authentication in TLS. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.54 | ScalarldapCurCfgSrv | read-only | current | Enable or disable DNS SRV to get LDAP server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.21.55 | ScalarldapNewCfgSrv | read-write | current | Enable or disable DNS SRV to get LDAP server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22 | NodeagSSHConfig | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.3 | ScalarsshCurCfgScpAdm | read-only | current | SCP-only admin password. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.4 | ScalarsshNewCfgScpAdm | read-write | current | Set SCP-only admin password. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.5 | ScalarsshNewCfgHKeyGen | read-write | current | This is an action object to generate the RSA host key. other(2) is returned always when read. The following values are writable: generate(1).. Generate the RSA… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.7 | ScalarsshCurCfgSSHPort | read-only | current | SSH server port number. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.8 | ScalarsshNewCfgSSHPort | read-write | current | Set SSH server port number. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.9 | ScalarsshCurCfgScpApplySave | read-only | current | SCP apply and save. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.10 | ScalarsshNewCfgScpApplySave | read-write | current | Enable/Disable the SCP apply and save. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.11 | ScalarsshCurCfgStatus | read-only | current | SSH server status. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.12 | ScalarsshNewCfgStatus | read-write | current | Turn SSH server ON/OFF. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.13 | ScalarsshPubKeyRemAll | read-write | current | Remove all the public key entries on switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.14 | ScalarsshPubKeyRemUser | read-write | current | Remove a specific username from the public key database. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.15 | TablesshPubKeyConfigTable | not-accessible | current | The table for ssh public keys and its users. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1 | RowsshPubKeyConfigEntry | not-accessible | current | A row in the ssh public keys tables. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.1 | ColumnsshPubKeyConfigIndex | read-only | current | The index of the ssh public key entry. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.2 | ColumnsshPubKeyType | read-only | current | Specify the type of the public key. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.3 | ColumnsshPubKeyHashValue | read-only | current | The hash value of a specific public key. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.4 | ColumnsshPubkeyUserBmap | read-only | current | The user list in the key entry. The user are presented in bitmap format. as follows: OCTET 1 OCTET 2 OCTET 3 OCTET 4 xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx ||… |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.5 | ColumnsshPubKeyAddUser | read-write | current | Add a new user to a particular public key. Reminder: The user must be a valid system user. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.6 | ColumnsshPubKeyDelUser | read-write | current | Remove a user from the user list of the public key entry. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.15.1.7 | ColumnsshPubKeyRemEntry | read-write | current | Remove a public key entry. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.16 | ScalarsshCurCfgSSHAttempts | read-only | current | SSH server maximum authentication attempts. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.22.17 | ScalarsshNewCfgSSHAttempts | read-write | current | Set SSH server maximum authentication attempts. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24 | NodeagsFlowConfig | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.1 | ScalarsflowCurCfgServerAddress | read-only | current | The IP address of the sFlow server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.2 | ScalarsflowNewCfgServerAddress | read-write | current | The IP address of the sFlow server. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.3 | ScalarsflowCurCfgServerPort | read-only | current | Specify the sFlow server port number. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.4 | ScalarsflowNewCfgServerPort | read-write | current | Specify the sFlow server port number. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.5 | ScalarsflowCurCfgState | read-only | current | Enable or disable sFlow. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.6 | ScalarsflowNewCfgState | read-write | current | Enable or disable sFlow |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.7 | TablesflowCurPortCfgTable | not-accessible | current | The table of sFlow port configuration. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.7.1 | RowsflowCurPortCfgTableEntry | not-accessible | current | A row in the sFlow port configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.7.1.1 | ColumnsflowCurPortCfgTableId | read-only | current | sFlow port number. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.7.1.2 | ColumnsflowCurPortSampling | read-only | current | The current sFlow port sampling rate. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.7.1.3 | ColumnsflowCurPortPolling | read-only | current | The current sFlow port polling interval. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.7.1.4 | ColumnsflowCurPortCfgPortAlias | read-only | current | The current sFlow port alias. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.8 | TablesflowNewPortCfgTable | not-accessible | current | The table of sFlow port configuration. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.8.1 | RowsflowNewPortCfgTableEntry | not-accessible | current | A row in the sFlow port configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.8.1.1 | ColumnsflowNewPortCfgTableId | read-only | current | sFlow port number. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.8.1.2 | ColumnsflowNewPortSampling | read-write | current | The new sFlow port sampling rate. Valid range: 256-65536| 0 for disable |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.8.1.3 | ColumnsflowNewPortPolling | read-write | current | The new sFlow port polling interval. Valid range: 5-60| 0 for disable |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.8.1.4 | ColumnsflowNewPortCfgPortAlias | read-only | current | The new sFlow port alias. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.9 | ScalarsflowCurCfgMgmtPort | read-only | current | The port that the sFlow server is connected to |
| 1.3.6.1.4.1.20301.2.7.21.1.1.24.10 | ScalarsflowNewCfgMgmtPort | read-write | current | Chose the port that the sFlow server will connect to |
| 1.3.6.1.4.1.20301.2.7.21.1.1.26 | NodeagQsfp40GConfig | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.26.1 | TableagQsfp40GCfgTable | not-accessible | current | The QSFP 40G ports configuration table |
| 1.3.6.1.4.1.20301.2.7.21.1.1.26.1.1 | Rowqsfp40GPortEntry | not-accessible | current | A row in the QSFP 40G configuration table |
| 1.3.6.1.4.1.20301.2.7.21.1.1.26.1.1.1 | ColumnqsfpPortNumber | read-only | current | The port number |
| 1.3.6.1.4.1.20301.2.7.21.1.1.26.1.1.2 | ColumnqsfpPortBootedMode | read-only | current | The booted port configuration, either mode10G(1) for 10 G, or mode40G(2) for 40 G mode. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.26.1.1.3 | ColumnqsfpPortSavedMode | read-write | current | The saved port configuration, either mode10G(1) for 10 G, or mode40G(2) for 40 G mode. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.26.1.1.4 | ColumnqsfpPortAlias | read-only | current | The port alias |
| 1.3.6.1.4.1.20301.2.7.21.1.1.28 | NodeagResVlans | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.28.1 | ScalaragCurSystemFirstInternalVlan | read-only | current | The low limit of system internal reserved VLAN space. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.28.2 | ScalaragNewSystemFirstInternalVlan | read-write | current | The low limit of system internal reserved VLAN space. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.28.3 | ScalaragCurSystemLastInternalVlan | read-only | current | The high limit of system internal reserved VLAN space. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.28.4 | ScalaragNewSystemLastInternalVlan | read-write | current | The high limit of system internal reserved VLAN space. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.29 | NodeagBhVlan | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.29.1 | ScalaragCurBlackholeVlan | read-only | current | The current system black-hole VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.29.2 | ScalaragNewBlackholeVlan | read-write | current | The current system black-hole VLAN |
| 1.3.6.1.4.1.20301.2.7.21.1.1.30 | NodeagPortMapConfig | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.30.4 | TableagPortMapCfgTable | not-accessible | current | The Port Map configuration table |
| 1.3.6.1.4.1.20301.2.7.21.1.1.30.4.1 | RowportMapEntry | not-accessible | current | A row in the Port Map configuration table |
| 1.3.6.1.4.1.20301.2.7.21.1.1.30.4.1.1 | ColumnpmapPortNumber | read-only | current | The port number |
| 1.3.6.1.4.1.20301.2.7.21.1.1.30.4.1.3 | ColumnpmapPortState | read-write | current | The port configuration, either unmapped(0) for ports that are not mapped, or mapped(1) for mapped ports. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.30.4.1.4 | ColumnpmapPortAlias | read-only | current | The Port Alias. |
| 1.3.6.1.4.1.20301.2.7.21.1.1.30.5 | TableagPortMapSwitchTable | not-accessible | current | The Port Map per switch number information table |
| 1.3.6.1.4.1.20301.2.7.21.1.1.30.5.1 | RowportMapSwitchEntry | not-accessible | current | Port Map information for a switch number |
| 1.3.6.1.4.1.20301.2.7.21.1.1.30.5.1.1 | ColumnpmapSwNumber | read-only | current | The configured switch number |
| 1.3.6.1.4.1.20301.2.7.21.1.1.30.5.1.2 | ColumnpmapSwMaxBandwidth | read-only | current | The maximum allowed bandwidth |
| 1.3.6.1.4.1.20301.2.7.21.1.1.30.5.1.4 | ColumnpmapSwUsedBandwidth | read-only | current | The bandwidth used in the saved configuration |
| 1.3.6.1.4.1.20301.2.7.21.1.1.31 | NodeagCSRConfig | |||
| 1.3.6.1.4.1.20301.2.7.21.1.1.31.1 | ScalarcsrCountryName | read-write | current | Country Code for the CSR (eg., US or UK) |
| 1.3.6.1.4.1.20301.2.7.21.1.1.31.2 | ScalarcsrStateName | read-write | current | State Name for the CSR (eg., California) |
| 1.3.6.1.4.1.20301.2.7.21.1.1.31.3 | ScalarcsrCityName | read-write | current | City Name for the CSR (eg., Santa Clara) |
| 1.3.6.1.4.1.20301.2.7.21.1.1.31.4 | ScalarcsrOrganizationName | read-write | current | Organization Name for the CSR (eg., Lenovo) |
| 1.3.6.1.4.1.20301.2.7.21.1.1.31.5 | ScalarcsrUnitName | read-write | current | Organization Unit Name for the CSR (eg., Engineering) |
| 1.3.6.1.4.1.20301.2.7.21.1.1.31.6 | ScalarcsrCommonName | read-write | current | Common Name for the CSR (eg., www.lenovo.com) |
| 1.3.6.1.4.1.20301.2.7.21.1.1.31.7 | ScalarcsrEmail | read-write | current | Email for the CSR (eg., [email protected]) |
| 1.3.6.1.4.1.20301.2.7.21.1.1.31.8 | ScalarcsrGenerate | read-write | current | When this object is read the current state is returned. complete(2) indicates that the last CSR generatation operation was completed. inprogress(3) indicates t… |
| 1.3.6.1.4.1.20301.2.7.21.1.2 | NodeagentStats | |||
| 1.3.6.1.4.1.20301.2.7.21.1.2.1 | NodepktStats | |||
| 1.3.6.1.4.1.20301.2.7.21.1.2.1.1 | ScalarpktStatsAllocs | read-only | current | Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.1.2 | ScalarpktStatsFrees | read-only | current | Total number of times the packet buffers are freed(released) to the packet buffer pool by the TCP/IP protocol stack. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.1.3 | ScalarpktStatsAllocFails | read-only | current | Total number of packet allocation failures from the packet buffer pool by the TCP/IP protocol stack. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.1.4 | ScalarpktStatsMediums | read-only | current | Total number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol sta… |
| 1.3.6.1.4.1.20301.2.7.21.1.2.1.5 | ScalarpktStatsJumbos | read-only | current | Total number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.1.6 | ScalarpktStatsSmalls | read-only | current | Total number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.1.7 | ScalarpktStatsMediumsHiWatermark | read-only | current | The highest number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protoc… |
| 1.3.6.1.4.1.20301.2.7.21.1.2.1.8 | ScalarpktStatsJumbosHiWatermark | read-only | current | The highest number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.1.9 | ScalarpktStatsSmallsHiWatermark | read-only | current | The highest number of packet allocations with size less than or equal to 128 bytes from the packet buffer pool by the TCP/IP protocol stack. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.1.10 | ScalarpktStatsDiscards | read-only | current | The total number of packets which were chosen to be discarded because the number of buffers available in the packet buffer pool is low. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2 | NodempCpuStats | |||
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.1 | TablempCpuStatsTable | not-accessible | current | The table of CPU utilization statistics. It is deprecated. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1 | RowmpCpuStatsTableEntry | not-accessible | current | A row in the CPU utilization stats table. It is deprecated. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1.1 | ColumnmpCpuSwitchNumber | read-only | current | The number of the configured switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1.2 | ColumnmpCpuSwitchUUID | read-only | current | The UUID of the chassis the embedded switch is in. An empty string is returned for Top of Rack switches. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1.3 | ColumnmpCpuStatsUtil1Second | read-only | current | The utilization of MP CPU over 1 second. It shows the percentage. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1.4 | ColumnmpCpuStatsUtil5Seconds | read-only | current | The utilization of MP CPU over 5 seconds. It shows the percentage. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1.5 | ColumnmpCpuStatsUtil1Minute | read-only | current | The utilization of MP CPU over 1 minute. It shows the percentage. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.1.1.6 | ColumnmpCpuStatsUtil5Minutes | read-only | current | The utilization of MP CPU over 5 minutes. It shows the percentage. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.5 | TablecpuUtilProcessStatsTable | not-accessible | current | The table of CPU utilization per process statistics. It is deprecated. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1 | RowcpuUtilProcessStatsTableEntry | not-accessible | current | A row in the CPU utilization stats per process table. It is deprecated. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.1 | ColumnprocessSwitchNumber | read-only | current | The number of the configured switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.2 | ColumnprocessId | read-only | current | The process ID. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.3 | ColumnprocessSwitchUUID | read-only | current | The UUID of the chassis the embedded switch is in. An empty string is returned for Top of Rack switches. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.4 | ColumnprocessName | read-only | current | Process Name. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.5 | ColumncpuProcessUtil1Sec | read-only | current | The utilization of MP CPU over 1 second. It shows the percentage. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.6 | ColumncpuProcessUtil5Sec | read-only | current | The utilization of MP CPU over 5 seconds. It shows the percentage. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.7 | ColumncpuProcessUtil1Min | read-only | current | The utilization of MP CPU over 1 min. It shows the percentage. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.8 | ColumncpuProcessUtil5Min | read-only | current | The utilization of MP CPU over 5 min. It shows the percentage. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.5.1.9 | ColumnprocessStatus | read-only | current | Process Status |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.7 | TablempCpuStatsRevTable | not-accessible | current | The table of CPU utilization statistics. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1 | RowmpCpuStatsRevTableEntry | not-accessible | current | A row in the CPU utilization stats table. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1.1 | ColumnmpCpuSwitchNumberRev | read-only | current | The number of the configured switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1.2 | ColumnmpCpuSwitchUUIDRev | read-only | current | The UUID of the chassis the embedded switch is in. An empty string is returned for Top of Rack switches. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1.3 | ColumnmpCpuStatsUtil1SecondRev | read-only | current | The utilization of MP CPU over 1 second. It shows the percentage. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1.4 | ColumnmpCpuStatsUtil5SecondsRev | read-only | current | The utilization of MP CPU over 5 seconds. It shows the percentage. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1.5 | ColumnmpCpuStatsUtil1MinuteRev | read-only | current | The utilization of MP CPU over 1 minute. It shows the percentage. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.7.1.6 | ColumnmpCpuStatsUtil5MinutesRev | read-only | current | The utilization of MP CPU over 5 minutes. It shows the percentage. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.8 | TablecpuUtilProcessStatsRevTable | not-accessible | current | The table of CPU utilization per process statistics. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1 | RowcpuUtilProcessStatsRevTableEntry | not-accessible | current | A row in the CPU utilization stats per process table. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.1 | ColumnprocessSwitchNumberRev | read-only | current | The number of the configured switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.2 | ColumnprocessIdRev | read-only | current | The process ID. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.3 | ColumnprocessSwitchUUIDRev | read-only | current | The UUID of the chassis the embedded switch is in. An empty string is returned for Top of Rack switches. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.4 | ColumnprocessNameRev | read-only | current | Process Name. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.5 | ColumncpuProcessUtil1SecRev | read-only | current | The utilization of MP CPU over 1 second. It shows the percentage. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.6 | ColumncpuProcessUtil5SecRev | read-only | current | The utilization of MP CPU over 5 seconds. It shows the percentage. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.7 | ColumncpuProcessUtil1MinRev | read-only | current | The utilization of MP CPU over 1 min. It shows the percentage. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.8 | ColumncpuProcessUtil5MinRev | read-only | current | The utilization of MP CPU over 5 min. It shows the percentage. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.2.8.1.9 | ColumnprocessStatusRev | read-only | current | Process Status |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3 | NodeportStats | |||
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1 | TableportStatsTable | not-accessible | current | The table of port statistics. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1 | RowportStatsTableEntry | not-accessible | current | A row in the port stats table. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.1 | ColumnportStatsIndx | read-only | current | The port index. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.2 | ColumnportStatsPhyIfInOctets | read-only | current | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.3 | ColumnportStatsPhyIfInUcastPkts | read-only | current | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.4 | ColumnportStatsPhyIfInNUcastPkts | read-only | current | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.5 | ColumnportStatsPhyIfInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.6 | ColumnportStatsPhyIfInErrors | read-only | current | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.7 | ColumnportStatsPhyIfInUnknownProtos | read-only | current | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.8 | ColumnportStatsPhyIfOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.9 | ColumnportStatsPhyIfOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se… |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.10 | ColumnportStatsPhyIfOutNUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre… |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.11 | ColumnportStatsPhyIfOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.12 | ColumnportStatsPhyIfOutErrors | read-only | current | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.13 | ColumnportStatsPhyIfOutQLen | read-only | current | The length of the output packet queue (in packets). |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.14 | ColumnportStatsPhyIfInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.15 | ColumnportStatsPhyIfOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.16 | ColumnportStatsClear | read-write | current | Setting this value to clear(2) clears the stats for this port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.17 | ColumnportStatsPhyIfInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.18 | ColumnportStatsPhyIfOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.20 | ColumnportStatsLinkStateChange | read-only | current | Number of link state changes. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.21 | ColumnportStatsPhyIfInFctlPkts | read-only | current | The number of inbound flow control packets. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.22 | ColumnportStatsPhyIfOutFctlPkts | read-only | current | The number of outbound flow control packets. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.23 | ColumnportStatsPhyIfInFctlPktsRate | read-only | current | The number of inbound flow control packets per second. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.24 | ColumnportStatsPhyIfOutFctlPktsRate | read-only | current | The number of outbound flow control packets per second. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.25 | ColumnportStatsPhyIfIngDiscdVlan | read-only | current | The number of packets, discarded because of VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.26 | ColumnportStatsPhyIfIngDiscdEgrMap | read-only | current | The number of packets, discarded because of empty egress portmap. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.27 | ColumnportStatsPhyIfIngDiscdFilter | read-only | current | The number of packets, discarded because of filter. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.28 | ColumnportStatsPhyIfIngDiscdPolicy | read-only | current | The number of packets, discarded because of policy. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.29 | ColumnportStatsPhyIfIngDiscdNonFwdStat | read-only | current | The number of packets, discarded because of Non-Forwarding State. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.30 | ColumnportStatsPhyIfIngDiscdIbpCbp | read-only | current | The number of packets discarded because of IBP/CBP. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.31 | ColumnportStatsDot1PortInFrames | read-only | current | The number of IN frames per port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.32 | ColumnportStatsDot1PortOutFrames | read-only | current | The number of OUT frames per port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.33 | ColumnportStatsDot1PortInDiscards | read-only | current | The number of IN packets discarded per port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.34 | ColumnportStatsDot1TpLearnedEntryDiscards | read-only | current | The number of Dot1Tp learned entries discarded. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.36 | ColumnportStatsPhyIfEgrHOLBlockDiscd | read-only | current | The number of packets, discarded because of HOL Blocking. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.37 | ColumnportStatsPhyIfEgrMMUDiscd | read-only | current | The number of packets, discarded by MMU because of zero port bitmap. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.38 | ColumnportStatsPhyIfEgrCellErrDiscd | read-only | current | The number of packets, discarded because of Cell Errors or purging. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.39 | ColumnportStatsPhyIfEgrMMUAgeDiscd | read-only | current | The number of packets, discarded because of MMU Aging. Applicable in 10/100 mode, incremented for frames aborted which were deferred for an excessive period of… |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.40 | ColumnportStatsPhyIfEgrOtherDiscd | read-only | current | The number of packets, discarded because of Other reasons. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.1.1.41 | ColumnportStatsPortAlias | read-only | current | The port alias. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.3 | TableportMgmtStatsTable | not-accessible | current | The table of port statistics. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1 | RowportMgmtStatsTableEntry | not-accessible | current | A row in the management port stats table. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.1 | ColumnportMgmtStatsIndx | read-only | current | The management port index. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.2 | ColumnportMgmtStatsRxBytes | read-only | current | The total number of bytes received. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.3 | ColumnportMgmtStatsTxBytes | read-only | current | The total number of bytes transmitted. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.4 | ColumnportMgmtStatsRxpackets | read-only | current | Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.5 | ColumnportMgmtStatsTxpackets | read-only | current | Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.6 | ColumnportMgmtStatsRxErrors | read-only | current | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.7 | ColumnportMgmtStatsTxErrors | read-only | current | The number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.8 | ColumnportMgmtStatsRxDropped | read-only | current | The number of inbound packets that were dropped. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.9 | ColumnportMgmtStatsTxDropped | read-only | current | The number of outbound packets that were dropped. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.10 | ColumnportMgmtStatsRxOverruns | read-only | current | The number of data overruns over this link. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.11 | ColumnportMgmtStatsTxOverruns | read-only | current | The number of data overruns over this link. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.12 | ColumnportMgmtStatsRxFrame | read-only | current | The number of frames received on this link. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.13 | ColumnportMgmtStatsTxCarrier | read-only | current | The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a this interface. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.14 | ColumnportMgmtStatsRxMulticast | read-only | current | The total number of multicast packets received. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.15 | ColumnportMgmtStatsTxCollisions | read-only | current | The number of collisions on this outbound segment. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.3.1.16 | ColumnportMgmtStatsPortAlias | read-only | current | The port alias. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4 | TableallportsStatsTable | not-accessible | current | The table of all ports statistics. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1 | RowallportsStatsTableEntry | not-accessible | current | A row in the table of all ports statistics. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.1 | ColumnallportsStatsIndx | read-only | current | The port number. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.2 | ColumnallportsStatsDescr | read-only | current | The port description. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.3 | ColumnallportsStatsSpeed | read-only | current | The current operational speed of the port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.4 | ColumnallportsStatsPhysAddress | read-only | current | The port MAC Address. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.5 | ColumnallportsStatsAdminStatus | read-only | current | The port Admin state. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.6 | ColumnallportsStatsOperStatus | read-only | current | The port Operational Status. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.7 | ColumnallportsStatsInOctets | read-only | current | Octets In for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.8 | ColumnallportsStatsOutOctets | read-only | current | Octets Out for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.9 | ColumnallportsStatsInPkts | read-only | current | Packets In for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.10 | ColumnallportsStatsOutPkts | read-only | current | Packets Out for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.11 | ColumnallportsStatsInUcast | read-only | current | Unicast Packets In for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.12 | ColumnallportsStatsOutUcast | read-only | current | Unicast Packets Out for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.13 | ColumnallportsStatsInBcast | read-only | current | Broadcasts Packets In for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.14 | ColumnallportsStatsOutBcast | read-only | current | Broadcasts Packets Out for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.15 | ColumnallportsStatsInMcast | read-only | current | Multicast Packets In for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.16 | ColumnallportsStatsOutMcast | read-only | current | Multicast Packets Out for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.17 | ColumnallportsStatsInDiscards | read-only | current | Discarded Packets for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.18 | ColumnallportsStatsOutDiscards | read-only | current | Outbound Packets for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.19 | ColumnallportsStatsInErrors | read-only | current | Error Packets for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.20 | ColumnallportsStatsOutErrors | read-only | current | Not sent packets due to error. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.21 | ColumnallportsStatsInUnknownProtos | read-only | current | Unknown protocol packets. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.22 | ColumnallportsStatsOutQLen | read-only | current | Outbound Packet Queue Length. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.23 | ColumnallportsStatsipInReceives | read-only | current | Ip In Receives. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.24 | ColumnallportsStatsipInHeaderErrors | read-only | current | Ip In Header Errors. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.25 | ColumnallportsStatsipInDiscards | read-only | current | Ip In Discards. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.26 | ColumnallportsStatsLinkStateChange | read-only | current | Number of link state changes. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.27 | ColumnallportsStatsipInReceivesRate | read-only | current | Ip In Receives rate. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.28 | ColumnallportsStatsipInHeaderErrorsRate | read-only | current | Ip In Header Errors rate. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.29 | ColumnallportsStatsipInDiscardsRate | read-only | current | Ip In Discards rate. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.30 | ColumnallportsStatsInOctetsRate | read-only | current | Octets In rate for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.31 | ColumnallportsStatsOutOctetsRate | read-only | current | Octets Out rate for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.32 | ColumnallportsStatsInUcastRate | read-only | current | Unicast Packets In rate for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.33 | ColumnallportsStatsOutUcastRate | read-only | current | Unicast Packets Out rate for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.34 | ColumnallportsStatsInBcastRate | read-only | current | Broadcasts Packets In rate for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.35 | ColumnallportsStatsOutBcastRate | read-only | current | Broadcasts Packets Out rate for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.36 | ColumnallportsStatsInMcastRate | read-only | current | Multicast Packets In rate for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.37 | ColumnallportsStatsOutMcastRate | read-only | current | Multicast Packets Out rate for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.38 | ColumnallportsStatsInDiscardsRate | read-only | current | Discarded In Packets rate for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.39 | ColumnallportsStatsOutDiscardsRate | read-only | current | Discarded Out Packets rate for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.40 | ColumnallportsStatsInErrorsRate | read-only | current | Erroneus inbound packets rate for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.41 | ColumnallportsStatsOutErrorsRate | read-only | current | Not sent packets due to error rate. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.4.1.42 | ColumnallportsStatsPortAlias | read-only | current | The port alias. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.6 | ScalarclearPortsStats | read-write | current | Setting this to clear(2) results in clearing the statistics for all ports. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.7 | Tabledot1RateStatsTable | not-accessible | current | The table of bridging statistics per second. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1 | Rowdot1RateStatsTableEntry | not-accessible | current | Bridging statistics per second. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1.1 | Columndot1RateStatsIndx | read-only | current | The port index. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1.2 | Columndot1RatePortInFrames | read-only | current | The number of frames that have been received per second by this port from its segment. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1.3 | Columndot1RatePortOutFrames | read-only | current | The number of frames that have been transmitted per second by this port to its segment. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1.4 | Columndot1RatePortInDiscards | read-only | current | Count of valid frames received which were discarded per second. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1.5 | Columndot1RateTpLearnedEntryDiscards | read-only | current | The number per second of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.7.1.9 | Columndot1RatePortAlias | read-only | current | The port alias. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.8 | Tabledot3RateStatsTable | not-accessible | current | The table of Ethernet statistics per second. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1 | Rowdot3RateStatsTableEntry | not-accessible | current | Ethernet statistics per second. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.1 | Columndot3RateStatsIndx | read-only | current | The port index. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.2 | Columndot3RateStatsAlignmentErrors | read-only | current | A count of frames received per second on a particular interface that are not an integral number of octets in length and do not pass the FCS check. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.3 | Columndot3RateStatsFCSErrors | read-only | current | A count of frames received per second on a particular interface that are an integral number of octets in length but do not pass the FCS check. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.4 | Columndot3RateStatsSingleCollisionFrames | read-only | current | A count of successfully transmitted frames per second on a particular interface for which transmission is inhibited by exactly one collision. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.5 | Columndot3RateStatsMultipleCollisionFrames | read-only | current | A count of successfully transmitted frames per second on a particular interface for which transmission is inhibited by more than one collision. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.6 | Columndot3RateStatsSQETestErrors | read-only | current | A count of times that the SQE TEST ERROR message is generated per second by the PLS sublayer for a particular interface. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.7 | Columndot3RateStatsDeferredTransmissions | read-only | current | A count per second of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.8 | Columndot3RateStatsLateCollisions | read-only | current | The number of times per second that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.9 | Columndot3RateStatsExcessiveCollisions | read-only | current | A count per second of frames for which transmission on a particular interface fails due to excessive collisions. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.10 | Columndot3RateStatsInternalMacTransmitErrors | read-only | current | A count per second of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.11 | Columndot3RateStatsCarrierSenseErrors | read-only | current | The number of times per second that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.12 | Columndot3RateStatsFrameTooLongs | read-only | current | A count per second of frames received on a particular interface that exceed the maximum permitted frame size. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.13 | Columndot3RateStatsInternalMacReceiveErrors | read-only | current | A count per second of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.3.8.1.14 | Columndot3RatePortAlias | read-only | current | The port alias. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.7 | NodeagClearStats | |||
| 1.3.6.1.4.1.20301.2.7.21.1.2.7.1 | ScalarsnmpClearStats | read-write | current | Setting this to clear(2) results in clearing the SNMP statistics. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.9 | NodentpStats | |||
| 1.3.6.1.4.1.20301.2.7.21.1.2.9.1 | ScalarntpPrimaryServerReqSent | read-only | current | The total number of NTP requests sent to Primary NTP Server. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.9.2 | ScalarntpPrimaryServerRespRcvd | read-only | current | The total number of NTP responces received from Primary NTP Server. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.9.3 | ScalarntpPrimaryServerUpdates | read-only | current | The total number of NTP Updates by Primary NTP Server. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.9.4 | ScalarntpSecondaryServerReqSent | read-only | current | The total number of NTP requests sent to Secondary NTP Server. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.9.5 | ScalarntpSecondaryServerRespRcvd | read-only | current | The total number of NTP responces received from Secondary NTP Server. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.9.6 | ScalarntpSecondaryServerUpdates | read-only | current | The total number of NTP Updates by Secondary NTP Server. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.9.7 | ScalarntpLastUpdateServer | read-only | current | The type of ntp server updated last time. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.9.8 | ScalarntpLastUpdateTime | read-only | current | The last time updated by ntp server. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.9.9 | ScalarntpClearStats | read-write | current | Setting this value to clear(2) clears the stats for ntp. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.9.10 | ScalarntpSystemCurrentTime | read-only | current | The current system time. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.11 | NodeaclStats | |||
| 1.3.6.1.4.1.20301.2.7.21.1.2.11.1 | TableaclStatsTable | not-accessible | current | The table of ACL statistics. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.11.1.1 | RowaclStatsTableEntry | not-accessible | current | Statistics about a particular ACL configuration entry. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.11.1.1.1 | ColumnaclStatsIndex | read-only | current | The acl index. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.11.1.1.2 | ColumnaclStatsHits | read-only | current | Total number of hits for this ACL entry |
| 1.3.6.1.4.1.20301.2.7.21.1.2.11.1.1.3 | ColumnaclClearStats | read-write | current | Setting this value to clear(2) clears the stats for the ACL. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.11.2 | TablevmapStatsTable | not-accessible | current | The table of VMAP statistics. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.11.2.1 | RowvmapStatsTableEntry | not-accessible | current | Statistics about a particular VMAP configuration entry. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.11.2.1.1 | ColumnvmapStatsIndex | read-only | current | The vmap index. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.11.2.1.2 | ColumnvmapStatsHits | read-only | current | Total number of hits for this VMAP entry |
| 1.3.6.1.4.1.20301.2.7.21.1.2.11.2.1.3 | ColumnvmapClearStats | read-write | current | Setting this value to clear(2) clears the stats for the VMAP. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.11.3 | Tableacl6StatsTable | not-accessible | current | The table of IPv6 ACL statistics. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.11.3.1 | Rowacl6StatsTableEntry | not-accessible | current | Statistics about a particular IPv6 ACL configuration entry. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.11.3.1.1 | Columnacl6StatsIndex | read-only | current | The ipv6 acl index. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.11.3.1.2 | Columnacl6StatsHits | read-only | current | Total number of hits for this IPv6 ACL entry |
| 1.3.6.1.4.1.20301.2.7.21.1.2.11.3.1.3 | Columnacl6ClearStats | read-write | current | Setting this value to clear(2) clears the stats for the IPv6 ACL. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.12 | NodememoryStats | |||
| 1.3.6.1.4.1.20301.2.7.21.1.2.12.1 | TablememoryStatsTable | not-accessible | current | The table of memory statistics |
| 1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1 | RowmemoryStatsEntry | not-accessible | current | Statistics about of memory |
| 1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.1 | ColumnswitchNumber | read-only | current | The number of the configured switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.2 | ColumnswitchUUID | read-only | current | The UUID of the chassis the embedded switch is in. An empty string is returned for Top of Rack switches. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.3 | ColumntotalMemoryStats | read-only | current | The total memory in bytes. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.4 | ColumnmemoryFreeStats | read-only | current | The free memory in bytes. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.5 | ColumnmemorySharedStats | read-only | current | The shared memory in bytes. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.6 | ColumnmemoryBufferStats | read-only | current | The buffer memory in bytes. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.7 | ColumnswapTotalStats | read-only | current | The total swap memory in bytes. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.8 | ColumnswapFreeStats | read-only | current | The free swap memory in bytes. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.9 | ColumnhighTotalStats | read-only | current | The total high memory in bytes. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.12.1.1.10 | ColumnhighFreeStats | read-only | current | The free high memory in bytes. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20 | NodesnmpStats | |||
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.1 | ScalarnsnmpInPkts | read-only | current | snmpInPkts |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.2 | ScalarnsnmpInBadCommunityNames | read-only | current | snmpInBadCommunityNames |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.3 | ScalarnsnmpInASNParseErrs | read-only | current | snmpInASNParseErrs |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.4 | ScalarnsnmpOutPkts | read-only | current | snmpOutPkts |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.5 | ScalarnsnmpInTooBigs | read-only | current | snmpInTooBigs |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.6 | ScalarnsnmpInBadValues | read-only | current | snmpInBadValues |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.7 | ScalarnsnmpInGenErrs | read-only | current | snmpInGenErrs |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.8 | ScalarnsnmpInTotalSetVars | read-only | current | snmpInTotalSetVars |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.9 | ScalarnsnmpInGetNexts | read-only | current | snmpInGetNexts |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.10 | ScalarnsnmpInGetResponses | read-only | current | snmpInGetResponses |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.11 | ScalarnsnmpOutTooBigs | read-only | current | snmpOutTooBigs |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.12 | ScalarnsnmpOutBadValues | read-only | current | snmpOutBadValues |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.13 | ScalarnsnmpOutGenErrs | read-only | current | snmpOutGenErrs |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.14 | ScalarnsnmpOutGetNexts | read-only | current | snmpOutGetNexts |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.15 | ScalarnsnmpOutGetResponses | read-only | current | snmpOutGetResponses |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.16 | ScalarnsnmpSilentDrops | read-only | current | snmpSilentDrops |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.17 | ScalarnsnmpInBadVersions | read-only | current | snmpInBadVersions |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.18 | ScalarnsnmpInBadCommunityUses | read-only | current | snmpInBadCommunityUses |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.19 | ScalarnsnmpEnableAuthTraps | read-only | current | snmpEnableAuthTraps |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.20 | ScalarnsnmpInBadTypes | read-only | current | snmpInBadTypes |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.21 | ScalarnsnmpInNoSuchNames | read-only | current | snmpInNoSuchNames |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.22 | ScalarnsnmpInReadOnlys | read-only | current | snmpInReadOnlys |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.23 | ScalarnsnmpInTotalReqVars | read-only | current | snmpInTotalReqVars |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.24 | ScalarnsnmpInGetRequests | read-only | current | snmpInGetRequests |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.25 | ScalarnsnmpInSetRequests | read-only | current | snmpInSetRequests |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.26 | ScalarnsnmpInTraps | read-only | current | snmpInTraps |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.27 | ScalarnsnmpOutNoSuchNames | read-only | current | snmpOutNoSuchNames |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.28 | ScalarnsnmpOutReadOnlys | read-only | current | snmpOutReadOnlys |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.29 | ScalarnsnmpOutGetRequests | read-only | current | snmpOutGetRequests |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.30 | ScalarnsnmpOutSetRequests | read-only | current | snmpOutSetRequests |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.31 | ScalarnsnmpOutTraps | read-only | current | snmpOutTraps |
| 1.3.6.1.4.1.20301.2.7.21.1.2.20.32 | ScalarnsnmpProxyDrops | read-only | current | snmpProxyDrops |
| 1.3.6.1.4.1.20301.2.7.21.1.2.21 | NodempTcbStats | |||
| 1.3.6.1.4.1.20301.2.7.21.1.2.21.1 | TabletcpControlBlocksTable | not-accessible | current | All TCP allocated control blocks |
| 1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1 | RowtcpControlBlocksTableEntry | not-accessible | current | A row in the TCP control blocks table. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.1 | ColumntcpControlBlocksIndx | read-only | current | The TCP blocks index. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.2 | ColumndestAddr | read-only | current | The TCP block destination address. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.3 | ColumnremotePort | read-only | current | Tcp informations concerning the remote port |
| 1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.4 | ColumnsourceAddr | read-only | current | IP address of the source of the Tcp block |
| 1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.5 | ColumnlocalPort | read-only | current | Tcp informations concerning the local port |
| 1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.6 | Columnstate | read-only | current | The state of the Tcp |
| 1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.7 | ColumnportType | read-only | current | The type of the local port |
| 1.3.6.1.4.1.20301.2.7.21.1.2.21.1.1.8 | ColumnportState | read-only | current | The state of the local port |
| 1.3.6.1.4.1.20301.2.7.21.1.2.21.2 | TabletcpMGMTControlBlocksTable | not-accessible | current | All TCP allocated control blocks on MGMT port |
| 1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1 | RowtcpMGMTTableEntry | not-accessible | current | A row in the TCP on MGMT port table. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1.1 | ColumntcpMGMTIndx | read-only | current | Index in the tcpMGMTControlBlocksTable table. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1.2 | ColumnrecvQ | read-only | current | The size of the received TCP queue. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1.3 | ColumnsentQ | read-only | current | The size of the sent TCP blocks queue. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1.4 | ColumnlocalAddress | read-only | current | The local address for the TCP. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1.5 | ColumnforeignAddress | read-only | current | The remote address for the TCP. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.21.2.1.6 | ColumnstateMgmt | read-only | current | The port's state. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.22 | NodempUdpStats | |||
| 1.3.6.1.4.1.20301.2.7.21.1.2.22.1 | TableudpControlBlocksTable | not-accessible | current | All UDP control blocks in use |
| 1.3.6.1.4.1.20301.2.7.21.1.2.22.1.1 | RowudpControlBlocksTableEntry | not-accessible | current | A row in the UDP control blocks table. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.22.1.1.1 | ColumnudpMpLocalPort | read-only | current | The current UDP local port. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.22.1.1.2 | ColumnudpMpState | read-only | current | The port's state. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.22.2 | TableudpMGMTControlBlocksTable | not-accessible | current | All UDP control blocks allocated on MGMT port |
| 1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1 | RowudpMGMTTableEntry | not-accessible | current | A row in the UDP on MGMT port table. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1.1 | ColumnudpMGMTIndx | read-only | current | Index in the udpMGMTControlBlocksTable table. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1.2 | ColumnrecvQUdp | read-only | current | The size of the received UDP queue. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1.3 | ColumnsentQUdp | read-only | current | The size of the sent UDP blocks queue. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1.4 | ColumnlocalAddressUdp | read-only | current | The local address for the UDP. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1.5 | ColumnforeignAddressUdp | read-only | current | The remote address for the UDP. |
| 1.3.6.1.4.1.20301.2.7.21.1.2.22.2.1.6 | ColumnstateMgmtUdp | read-only | current | The port's state. |
| 1.3.6.1.4.1.20301.2.7.21.1.3 | NodeagentInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.1.3.1 | Nodehardware | |||
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1 | TablehwInfoTable | not-accessible | current | The table with the hardware information for the switches in the fabric. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1 | RowhwInfoTableEntry | not-accessible | current | Hardware related information for a switch in the fabric. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.1 | ColumnhwInfoSwitchNumber | read-only | current | The number of the attached switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.2 | ColumnhwInfoSwitchUUID | read-only | current | The UUID of the chassis the embedded switch is in. An empty string is returned for Top of Rack switches. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.3 | ColumnhwInfoPartNumber | read-only | current | The hardware part number of the Switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.4 | ColumnhwInfoRevision | read-only | current | The hardware revision. If the revision is not available, a zero length string should be returned. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.5 | ColumnhwInfoLastBoot | read-only | current | Time and reason of the last boot. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.6 | ColumnhwInfoMACAddress | read-only | current | The MAC address. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.7 | ColumnhwInfoSerialNumber | read-only | current | The switch serial number. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.8 | ColumnhwInfoSwitchSoftwareVersion | read-only | current | The switch software version. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.9 | ColumnhwInfoFlashConfiguration | read-only | current | The active flash configuration. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.10 | ColumnhwInfoManufacturingDate | read-only | current | The date of manufacturing. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.11 | ColumnhwInfoPanicDump | read-only | current | There is the panic dump file on the switch. yes -there is file, no - there is no file |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.12 | ColumnhwInfoFanStatus | read-only | current | The fan status on the system. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.13 | ColumnhwInfoFanSpeed | read-only | current | The fan speed on the system. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.14 | ColumnhwInfoTempSensors | read-only | current | The temperature sensors on the system. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.15 | ColumnhwInfoGlobalHealthStatus | read-only | current | This variable summarizes the statuses of several key elements of the device. OK: - All temperature sensors are below the warning threshold (eg. < 85 C); - All … |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.16 | ColumnhwInfoPCBAPartNumber | read-only | current | The PCBA part number. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.17 | ColumnhwInfoHardwareRevision | read-only | current | The hardware revision. If the revision is not available, a zero length string should be returned. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.18 | ColumnhwInfoPLDFirmwareVersion | read-only | current | The PLD Firmware Version. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.20 | ColumnhwInfoTemperatureWarn | read-only | current | The temperature Warning |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.21 | ColumnhwInfoTemperatureShut | read-only | current | The temperature Shutdown |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.22 | ColumnhwInfoTemperatureIn | read-only | current | The temperature Inlet |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.23 | ColumnhwInfoTemperatureOut | read-only | current | The temperature Exhaust |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.24 | ColumnhwInfoPowerConsumption | read-only | current | The switch power consumption. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.25 | ColumnhwInfoESN | read-only | current | The ESN of the switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.1.1.26 | ColumnhwInfoMTM | read-only | current | This object specifies the value for MTM. The available MTM values are: 7159-DFX (1) 7159-DRX (2) 7159-HCM (3) 7159-HCK (4) 7120-64F (5) |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.25 | TablehwPCIUnitTable | not-accessible | current | The table with PCI units on board. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.25.1 | RowhwPCIUnitTableEntry | not-accessible | current | A row in the PCI units table. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.25.1.1 | ColumnhwPCIUnitId | read-only | current | The Unit identifier. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.1.25.1.2 | ColumnhwPCIInfo | read-only | current | Unit information |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2 | NodeportInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1 | TableportInfoTable | not-accessible | current | The table of port information. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1 | RowportInfoTableEntry | not-accessible | current | A row in the port information table. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.1 | ColumnportInfoIndx | read-only | current | The port index. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.2 | ColumnportInfoSpeed | read-only | current | The current operational speed of the port. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.3 | ColumnportInfoMode | read-only | current | The current operational mode of the port. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.4 | ColumnportInfoFlowCtrl | read-only | current | The current operational flow control of the port. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.5 | ColumnportInfoLink | read-only | current | The current operational link status of the port. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.6 | ColumnportInfoPhyIfDescr | read-only | current | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the h… |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.7 | ColumnportInfoPhyIfType | read-only | current | The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.8 | ColumnportInfoPhyIfMtu | read-only | current | The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagr… |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.9 | ColumnportInfoPhyIfPhysAddress | read-only | current | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.… |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.10 | ColumnportInfoPhyIfOperStatus | read-only | current | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.11 | ColumnportInfoPhyIfLastChange | read-only | current | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization o… |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.18 | ColumnportInfoLearning | read-only | current | The port L2 (FDB) Learning state. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.19 | ColumnportInfoType | read-only | current | The type of the port. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.21 | ColumnportInfoPvid | read-only | current | This is the operational port vlan-id of the port. Typically, the value of this object is the same as the value of the agPortCurCfgPVID object. But if, for exam… |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.22 | ColumnportInfoVlanTag | read-only | current | This is the operational VLAN tag state of the port. Typically, the value of this object is the same as the value of the agPortCurCfgVlanTag objec. But if, for … |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.23 | ColumnportInfoErrDisableRecovery | read-only | current | This object indicates whether the system will automatically re-enable an error-disabled port after the time interval indicated by agCurCfgErrDisableTimeout has… |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.24 | ColumnportInfoErrDisableTimeLeft | read-only | current | If the portInfoErrDisableRecovery object has a value of 'enable' and the portInfoLink object has a value of 'errdisabled', the value of this object indicates t… |
| 1.3.6.1.4.1.20301.2.7.21.1.3.2.1.1.27 | ColumnportInfoAlias | read-only | current | The alias of the row in portInfo configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.3 | NodeswKeyInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.1.3.3.15 | TableagSwFeaturesTable | not-accessible | current | The table for software key features. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.3.15.1 | RowagSwFeaturesEntry | not-accessible | current | A row in the software key features table. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.3.15.1.1 | ColumnagSwFeaturesSwitchNumber | read-only | current | The number of the software key features switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.3.15.1.2 | ColumnagSwFeatureKeys | read-only | current | The software keys information on the switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.4 | NodeagDiff | |||
| 1.3.6.1.4.1.20301.2.7.21.1.3.4.2 | ScalaragDiffState | read-write | current | When this object is read the current state is returned. idle(3) indicates that there is no diff in progess. complete(5) indicates that the last diff operation … |
| 1.3.6.1.4.1.20301.2.7.21.1.3.4.3 | ScalaragDiffTableSize | read-only | current | The number of strings in the diff table. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.4.4 | TableagDiffTable | not-accessible | current | The table of diff strings. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.4.4.1 | RowagDiffTableEntry | not-accessible | current | An entry in the diff table. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.4.4.1.1 | ColumnagDiffIndex | read-only | current | The table index. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.4.4.1.2 | ColumnagDiffString | read-only | current | A string in the diff table. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.5 | NodeagCfgDump | |||
| 1.3.6.1.4.1.20301.2.7.21.1.3.5.2 | ScalaragCfgDumpState | read-write | current | When this object is read the current state is returned. idle(2) indicates that there is no dump in progess. complete(4) indicates that the last dump operation … |
| 1.3.6.1.4.1.20301.2.7.21.1.3.5.3 | ScalaragCfgDumpTableSize | read-only | current | The number of strings in the dump table. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.5.4 | TableagCfgDumpTable | not-accessible | current | The table of dump strings. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.5.4.1 | RowagCfgDumpTableEntry | not-accessible | current | An entry in the dump table. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.5.4.1.1 | ColumnagCfgDumpIndex | read-only | current | The table index. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.5.4.1.2 | ColumnagCfgDumpString | read-only | current | A string in the dump table. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.9 | NodegeaportInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.1.3.9.1 | TablegeaportInfoTable | not-accessible | current | The table of gea port mapping. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.9.1.1 | RowgeaportInfoTableEntry | not-accessible | current | An entry in the geaport table mapping. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.9.1.1.1 | ColumngeaportInfoLogicalIndex | read-only | current | The logical port index. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.9.1.1.2 | ColumngeaportInfoAlias | read-only | current | The GEA Port Alias. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.9.1.1.3 | ColumngeaportInfoPort | read-only | current | The GEA Port (0-based). |
| 1.3.6.1.4.1.20301.2.7.21.1.3.9.1.1.4 | ColumngeaportInfoUnit | read-only | current | The GEA Unit. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10 | NodechassisInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1 | TablechassisInfoTable | not-accessible | current | The table of chassisInfo |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1 | RowchassisInfoEntry | not-accessible | current | Information about the chassis |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.1 | ColumnembeddedSwitchNumber | read-only | current | The number of the attached embedded switch. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.2 | ColumnchassisInfoSwitchModuleBay | read-only | current | Switch Module Bay Number. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.3 | ColumnchassisInfoType | read-only | current | The Type of Chassis |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.4 | ColumnchassisInfoPOSTResults | read-only | current | POST Results. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.5 | ColumnmmcDefaultConfiguration | read-only | current | Management Module Control's Default Configuration |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.6 | ColumnmmcSkipExtendedMemoryTest | read-only | current | Management Module Control Skip Extended Memory Test. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.7 | ColumnmmcDisableNonCMMPorts | read-only | current | Management Module Control Disable Non-CMM Ports. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.8 | ColumnmmcPOSTDiagnosticsControl | read-only | current | Management Module Control POST Diagnostics Control. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.9 | ColumnmmcControlRegister | read-only | current | Management Module Control Control Register. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.10 | ColumnmmcExtendedControlRegister | read-only | current | Management Module Control Extended Control Register. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.11 | ColumnmmspDevicePowerUpComplete | read-only | current | Management Module Status Reporting Device PowerUp Complete. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.12 | ColumnmmspOverCurrentFault | read-only | current | Management Module Status Reporting Over Current Fault. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.13 | ColumnmmspFaultLED | read-only | current | Management Module Status Reporting Fault LED. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.14 | ColumnmmspPrimaryTemperatureWarning | read-only | current | Management Module Status Reporting Primary Temperature Warning. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.15 | ColumnmmspSecondaryTemperatureWarning | read-only | current | Management Module Status Reporting Secondary Temperature Warning. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.16 | ColumnmmspStatusRegister | read-only | current | Management Module Status Reporting Status Register. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.17 | ColumnmmspExtendedStatus | read-only | current | Management Module Status Reporting Extended Status. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.10.1.1.18 | ColumnchassisInfoUUID | read-only | current | Chassis UUID |
| 1.3.6.1.4.1.20301.2.7.21.1.3.11 | NodesfpInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.1.3.11.1 | TablesfpInfoTable | not-accessible | current | The table of external port SFP information. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1 | RowsfpInfoTableEntry | not-accessible | current | A row in the external port SFP information table. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.1 | ColumnsfpInfoIndx | read-only | current | The external port SFX index. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.2 | ColumnsfpInfoPortAlias | read-only | current | External Port SFP/XFP alias. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.3 | ColumnsfpInfoDevice | read-only | current | External Port SFP/XFP Device. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.4 | ColumnsfpInfoTXEnable | read-only | current | External Port SFP/XFP TX-Enable. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.5 | ColumnsfpInfoRXSignal | read-only | current | External Port SFP/XFP RX-Signal. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.6 | ColumnsfpInfoTXFault | read-only | current | External Port SFP/XFP TX-Fault. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.7 | ColumnsfpInfoApproved | read-only | current | External Port SFP/XFP Approval. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.8 | ColumnsfpInfoVendor | read-only | current | External Port SFP/XFP device vendor. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.9 | ColumnsfpInfoSerial | read-only | current | External Port SFP/XFP device serial. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.10 | ColumnsfpInfoPartNumber | read-only | current | External Port SFP/XFP device part number. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.11 | ColumnsfpInfoRevision | read-only | current | External Port SFP/XFP device revision. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.12 | ColumnsfpInfoVoltage | read-only | current | External Port SFP/XFP device voltage. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.13 | ColumnsfpInfoTemperature | read-only | current | External Port SFP/XFP device temperature. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.11.1.1.14 | ColumnsfpInfoWaveLength | read-only | current | External Port SFP/XFP device laser wave length. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.12 | NodeagVMGroupInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.1.3.12.1 | TablevmGroupInfoTbl | not-accessible | current | Virtual MAC information table |
| 1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1 | RowvmGroupInfolistEntry | not-accessible | current | The run-time information about a virtual machine |
| 1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.1 | ColumnvmGroupInfoIdx | read-only | current | Table index, 1 based. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.2 | ColumnvmGroupInfoMac | read-only | current | The virtual machine MAC address. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.3 | ColumnvmGroupInfoIP | read-only | current | The virtual machine IP address. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.4 | ColumnvmGroupInfoPortIdx | read-only | current | System port connected to the virtual machine. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.5 | ColumnvmGroupInfoGroup | read-only | current | The virtual machine group. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.6 | ColumnvmGroupInfoVlan | read-only | current | The virtual machine VLAN |
| 1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.7 | ColumnvmGroupInfoIsESXSvcCon | read-only | current | Set to 1 if ESX Service Console Interface, else 0. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.8 | ColumnvmGroupInfoIsVMK | read-only | current | Set to 1 if VM Kernel Interface, else 0. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.9 | ColumnvmGroupInfoName | read-only | current | Virtual Machine Name, if available. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.10 | ColumnvmGroupInfoUUID | read-only | current | Virtual Machine UUID, if available. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.11 | ColumnvmGroupInfoVSwitch | read-only | current | Virtual Machine VSwitch, if available. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.12 | ColumnvmGroupInfoPortGroup | read-only | current | Virtual Machine Port Group, if available. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.13 | ColumnvmGroupInfoHost | read-only | current | Virtual Machine Host, if available. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.12.1.1.14 | ColumnvmGroupInfoPortAlias | read-only | current | System port alias. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.13 | NodeaccessInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.1.3.13.1 | ScalaraccessInfoClearAllUserFailAttempts | read-write | current | Action Object. When set to clear(2),clears all the unsuccessful attempts of users. Otherwise nothing is done. ok(1) is returned always when read. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.13.2 | ScalaraccessInfoClearAllUserLocks | read-write | current | Action Object. When set to clear(2), Unlock all locked users. Otherwise nothing is done. ok(1) is returned always when read. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.13.3 | TableaccessUserInfoTable | not-accessible | current | The table of user information. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.13.3.1 | RowaccessUserInfoTableEntry | not-accessible | current | An entry in the user information table. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.13.3.1.1 | ColumnaccessUserInfoIndex | read-only | current | The table index. The index value corresponds to the same value of agAccessUserCurCfgUId for the user. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.13.3.1.2 | ColumnaccessUserInfoLockState | read-only | current | Lock State of a specific user, unlocked(1) or locked(2). When the state is locked the user is not allowed to login until the account is unlocked by the adminis… |
| 1.3.6.1.4.1.20301.2.7.21.1.3.13.3.1.3 | ColumnaccessUserInfoClearFailAttempts | read-write | current | Action Object. When set to clear(2), clears the unsuccessful attempts of a particular user. Otherwise nothing is done. ok(1) is returned always when read. |
| 1.3.6.1.4.1.20301.2.7.21.1.3.13.3.1.4 | ColumnaccessUserInfoClearLock | read-write | current | Action Object. When set to clear(2), unlock a particular user. Otherwise nothing is done. ok(1) is returned always when read. |
| 1.3.6.1.4.1.20301.2.7.21.1.4 | NodeagentOper | |||
| 1.3.6.1.4.1.20301.2.7.21.1.4.1 | TableagPortOperTable | not-accessible | current | The table of port operations. |
| 1.3.6.1.4.1.20301.2.7.21.1.4.1.1 | RowagPortOperTableEntry | not-accessible | current | A row in the port operations table. |
| 1.3.6.1.4.1.20301.2.7.21.1.4.1.1.1 | ColumnportOperIdx | read-only | current | The port index. |
| 1.3.6.1.4.1.20301.2.7.21.1.4.1.1.2 | ColumnportOperState | read-write | current | Enable/Disable port. |
| 1.3.6.1.4.1.20301.2.7.21.1.4.1.1.3 | ColumnportOperRmon | read-write | current | Enable/Disable RMON for port. |
| 1.3.6.1.4.1.20301.2.7.21.1.4.1.1.4 | ColumnportOperLearning | read-write | current | Enable/Disable L2 (FDB) Learning for this port. |
| 1.3.6.1.4.1.20301.2.7.21.1.4.1.1.5 | ColumnportOperAlias | read-only | current | The port alias.. |
| 1.3.6.1.4.1.20301.2.7.21.1.4.2 | NodeagNTPOper | |||
| 1.3.6.1.4.1.20301.2.7.21.1.4.2.1 | ScalarntpOperSendReq | read-write | current | Allows the user to send requests to the NTP server. |
| 1.3.6.1.4.1.20301.2.7.21.1.4.3 | NodeagOperPrm | |||
| 1.3.6.1.4.1.20301.2.7.21.1.4.3.1 | ScalaragCfgPrmMgtPort | read-only | current | Current State of the SM PRM Control of External Management Register. |
| 1.3.6.1.4.1.20301.2.7.21.1.4.3.2 | ScalaragCfgPrmExtPort | read-only | current | Current State of the SM PRM Control of External Ports Register. |
| 1.3.6.1.4.1.20301.2.7.21.1.4.3.3 | ScalaragCfgPrmFactDef | read-only | current | Current State of the SM PRM Control of Factory Default Register. |
| 1.3.6.1.4.1.20301.2.7.21.1.4.3.4 | ScalaragCfgPrmMgtVlan | read-only | current | Current State of the SM PRM Control of Mgmt VLAN Interface Register. |
| 1.3.6.1.4.1.20301.2.7.21.1.4.3.5 | ScalaragLocCfgPrmMgtPort | read-write | current | Enable or disable local control of external management. |
| 1.3.6.1.4.1.20301.2.7.21.1.4.3.6 | ScalaragLocCfgPrmExtPort | read-write | current | Enable or disable local control of external ports. |
| 1.3.6.1.4.1.20301.2.7.21.1.4.3.7 | ScalaragLocCfgPrmFactDef | read-write | current | Enable or disable local control of factory default reset. |
| 1.3.6.1.4.1.20301.2.7.21.1.4.3.8 | ScalaragLocCfgPrmMgtVlan | read-write | current | Enable or disable local control of Mgmt VLAN interface. |
| 1.3.6.1.4.1.20301.2.7.21.1.4.3.9 | ScalaragLocCfgPrmState | read-write | current | This object is used to turn on or off the system protected mode. |
| 1.3.6.1.4.1.20301.2.7.21.1.4.5 | NodeagSrvLedOper | |||
| 1.3.6.1.4.1.20301.2.7.21.1.4.5.1 | ScalarsrvLedOper | read-write | current | Enable/disable Service Required LED. |
| 1.3.6.1.4.1.20301.2.7.21.2 | Nodelayer2 | |||
| 1.3.6.1.4.1.20301.2.7.21.2.1 | Nodelayer2Configs | |||
| 1.3.6.1.4.1.20301.2.7.21.2.1.1 | Nodevlan | |||
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.1 | ScalarvlanMaxEnt | read-only | current | The maximum number of rows in the VLAN configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.2 | TablevlanCurCfgTable | not-accessible | current | The table of VLAN configuration. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1 | RowvlanCurCfgTableEntry | not-accessible | current | A row in the VLAN configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.1 | ColumnvlanCurCfgVlanId | read-only | current | The VLAN identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.2 | ColumnvlanCurCfgPorts | read-only | current | The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || ||… |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.3 | ColumnvlanCurCfgState | read-only | current | Enable or disable a VLAN |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.9 | ColumnvlanCurCfgVlanName | read-only | current | The VLAN name. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.10 | ColumnvlanCurCfgPrVlanType | read-only | current | The type of the Private VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.11 | ColumnvlanCurCfgPrVlanMapPriId | read-only | current | The primary vlan id |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.2.1.22 | ColumnvlanCurCfgVports | read-only | current | Current list of vPorts in VLAN |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.3 | TablevlanNewCfgTable | not-accessible | current | The table of VLAN configuration. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1 | RowvlanNewCfgTableEntry | not-accessible | current | A row in the VLAN configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.1 | ColumnvlanNewCfgVlanId | read-only | current | The VLAN identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.2 | ColumnvlanNewCfgVlanName | read-create | current | The VLAN name. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.3 | ColumnvlanNewCfgPorts | read-only | current | The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || ||… |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.4 | ColumnvlanNewCfgState | read-create | current | Enable or disable a VLAN |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.5 | ColumnvlanNewCfgAddPortIndex | read-create | current | The port to be added to the specified VLAN. A '0' value is returned when read. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.6 | ColumnvlanNewCfgRemovePortIndex | read-create | current | The port to be removed from the specified VLAN. A '0' value is returned when read. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.7 | ColumnvlanNewCfgDelete | read-create | current | This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.13 | ColumnvlanNewCfgPrVlanType | read-write | current | The type of the Private VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.14 | ColumnvlanNewCfgPrVlanMapPriId | read-write | current | The primary vlan id. To delete set 0. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.25 | ColumnvlanNewCfgVports | read-only | current | List of vPorts in VLAN |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.26 | ColumnvlanNewCfgAddVport | read-write | current | Add vPort in VLAN |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.27 | ColumnvlanNewCfgRemoveVport | read-write | current | Remove vPort from VLAN |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.28 | ColumnvlanNewCfgAddPortAlias | read-write | current | The port alias to be added to the specified VLAN. A '0' value is returned when read. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.3.1.29 | ColumnvlanNewCfgRemovePortAlias | read-write | current | The port alias to be removed from the specified VLAN. A '0' value is returned when read. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.1.4 | ScalarvlanMaxVlanID | read-only | current | The maximum allowed VLAN ID. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2 | Nodetrunkgroup | |||
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.1 | ScalartrunkGroupTableMaxSize | read-only | current | The maximum number of entries in trunk group table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.2 | TabletrunkGroupCurCfgTable | not-accessible | current | The table of trunk group configuration. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.2.1 | RowtrunkGroupCurCfgTableEntry | not-accessible | current | A row in the trunk group configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.2.1.1 | ColumntrunkGroupCurCfgIndex | read-only | current | The identifier of the trunk group. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.2.1.2 | ColumntrunkGroupCurCfgPorts | read-only | current | The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 |… |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.2.1.3 | ColumntrunkGroupCurCfgState | read-only | current | Enable or disable a trunk group. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.3 | TabletrunkGroupNewCfgTable | not-accessible | current | The table of trunk group configuration. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1 | RowtrunkGroupNewCfgTableEntry | not-accessible | current | A row in the trunk group configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.1 | ColumntrunkGroupNewCfgIndex | read-only | current | The identifier of the trunk group. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.2 | ColumntrunkGroupNewCfgPorts | read-only | current | The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 |… |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.3 | ColumntrunkGroupNewCfgAddPortIndex | read-create | current | The port to be added in the trunk group. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.4 | ColumntrunkGroupNewCfgRemovePortIndex | read-create | current | The port to be deleted from the trunk group. when read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.5 | ColumntrunkGroupNewCfgState | read-create | current | Enable or disable a trunk group. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.6 | ColumntrunkGroupNewCfgDelete | read-create | current | Setting the value to delete(2) will delete the entire row. When read, other(1) is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.7 | ColumntrunkGroupNewCfgAddPortAlias | read-write | current | The port alias to be added in the trunk group. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.3.1.8 | ColumntrunkGroupNewCfgRemovePortAlias | read-write | current | The port alias to be deleted from the trunk group. when read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.4 | ScalartrunkLacpGroupTableMaxSize | read-only | current | The maximum number of entries in LACP trunk group table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.5 | TabletrunkLacpGroupCurCfgTable | not-accessible | current | The table of LACP trunk group configuration. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.5.1 | RowtrunkLacpGroupCurCfgTableEntry | not-accessible | current | A row in the LACP trunk group configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.5.1.1 | ColumntrunkLacpGroupCurCfgIndex | read-only | current | The identifier of the LACP trunk group. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.5.1.2 | ColumntrunkLacpGroupCurCfgAdminKey | read-only | current | The administrative key of the LACP trunk group. Ports whose LACP key is same will be member ports of the trunk. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.6 | TabletrunkLacpGroupNewCfgTable | not-accessible | current | The table of LACP trunk group configuration. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.6.1 | RowtrunkLacpGroupNewCfgTableEntry | not-accessible | current | A row in the LACP trunk group configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.6.1.1 | ColumntrunkLacpGroupNewCfgIndex | read-only | current | The identifier of the LACP trunk group. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.2.6.1.2 | ColumntrunkLacpGroupNewCfgAdminKey | read-write | current | The administrative key of the LACP trunk group. Ports whose LACP key is same will be member ports of the trunk. Value 0 means LACP trunk group deletion. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.4 | Nodemirroring | |||
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1 | NodemirrPortMirr | |||
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1.1 | ScalarpmCurCfgPortMirrState | read-only | current | The state of port-based port mirroring. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1.2 | ScalarpmNewCfgPortMirrState | read-write | current | The state of port-based port mirroring. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3 | TablepmCurCfgPortMonitorTable | not-accessible | current | The table of monitoring ports. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3.1 | RowpmCurCfgPortMonitorEntry | not-accessible | current | A row in the monitoring port table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3.1.1 | ColumnpmCurCfgPmirrMoniPortIndex | read-only | current | The monitoring port number. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3.1.2 | ColumnpmCurCfgPmirrMirrPortIndex | read-only | current | The mirrored port number |
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3.1.3 | ColumnpmCurCfgPmirrDirection | read-only | current | The type of traffic to be monitored with respect to the mirrored port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3.1.7 | ColumnpmCurCfgPmirrMoniPortAlias | read-only | current | The monitoring port alias. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1.3.1.8 | ColumnpmCurCfgPmirrMirrPortAlias | read-only | current | The mirrored port alias. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4 | TablepmNewCfgPortMonitorTable | not-accessible | current | The table of monitoring ports. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1 | RowpmNewCfgPortMonitorEntry | not-accessible | current | A row in the monitoring port table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.1 | ColumnpmNewCfgPmirrMoniPortIndex | read-only | current | The monitoring port number. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.2 | ColumnpmNewCfgPmirrMirrPortIndex | read-only | current | The mirrored port number |
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.3 | ColumnpmNewCfgPmirrDirection | read-create | current | The type of traffic to be monitored with respect to the mirrored port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.4 | ColumnpmNewCfgPmirrDelete | read-create | current | Setting the value to delete(2) will delete the entire row. When read, other(1) is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.10 | ColumnpmNewCfgPmonDelete | read-create | current | Setting the value to delete(2) will delete the monitor port. When read, other(1) is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.11 | ColumnpmNewCfgPmirrMoniPortAlias | read-only | current | The monitoring port alias. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.4.1.4.1.12 | ColumnpmNewCfgPmirrMirrPortAlias | read-only | current | The mirrored port alias. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5 | Nodelacp | |||
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.1 | ScalarlacpCurSystemPriority | read-only | current | A 2-octet read-write value indicating the priority value associated with the Actor's System ID. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.2 | ScalarlacpNewSystemPriority | read-write | current | A 2-octet read-write value indicating the priority value associated with the Actor's System ID. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.5 | ScalarlacpCurSystemTimeoutTime | read-only | current | If a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3). |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.6 | ScalarlacpNewSystemTimeoutTime | read-write | current | If a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3). |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.7 | TablelacpCurPortCfgTable | not-accessible | current | The table of LACP port configuration. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1 | RowlacpCurPortCfgTableEntry | not-accessible | current | A row in the LACP port configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.1 | ColumnlacpCurPortCfgTableId | read-only | current | LACP port number. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.2 | ColumnlacpCurPortState | read-only | current | LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but resp… |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.3 | ColumnlacpCurPortActorPortPriority | read-only | current | The priority value assigned to this Aggregation Port. This 16-bit value is read-only. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.4 | ColumnlacpCurPortActorAdminKey | read-only | current | The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local signif… |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.5 | ColumnlacpCurPortActorMinLinks | read-only | current | The current minimum links for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.6 | ColumnlacpCurPortSuspendIndividual | read-only | current | It indicates if the port can be treated as an individual link when it does not get LACPDU from the peer port. suspend (can't be treated as a normal link) indiv… |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.7.1.7 | ColumnlacpCurPortAlias | read-only | current | LACP port alias. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.8 | TablelacpNewPortCfgTable | not-accessible | current | The table of LACP port configuration. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1 | RowlacpNewPortCfgTableEntry | not-accessible | current | A row in the LACP port configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.1 | ColumnlacpNewPortCfgTableId | read-only | current | LACP port number. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.2 | ColumnlacpNewPortState | read-write | current | LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but resp… |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.3 | ColumnlacpNewPortActorPortPriority | read-write | current | The priority value assigned to this Aggregation Port. This 16-bit value is read-write. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.4 | ColumnlacpNewPortActorAdminKey | read-write | current | The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local signi… |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.5 | ColumnlacpNewPortActorMinLinks | read-write | current | The current minimum links for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.6 | ColumnlacpNewPortSetToDefault | read-write | current | When read, always returns none(1). When setting setDefault(2) value, the LACP port settings are set to the default values. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.7 | ColumnlacpNewPortSuspendIndividual | read-write | current | It indicates if the port can be treated as an individual link when it does not get LACPDU from the peer port. suspend (can't be treated as a normal link) indiv… |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.8.1.8 | ColumnlacpNewPortAlias | read-only | current | LACP port alias. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.9 | ScalarlacpDeleteTrunk | read-write | current | Delete a trunk with specified admin key |
| 1.3.6.1.4.1.20301.2.7.21.2.1.5.10 | ScalarlacpNewSystemSetToDefault | read-write | current | When read, always returns none(1). When setting setDefault(2) value, the LACP system settings are set to the default values. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6 | Nodethash | |||
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.1 | NodethashL2L3 | |||
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.1.1 | Scalarl2ThashCurCfgSmacState | read-only | current | Enable or disable smac hash for traffic. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.1.2 | Scalarl2ThashNewCfgSmacState | read-write | current | Enable or disable smac hash for traffic. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.1.3 | Scalarl2ThashCurCfgDmacState | read-only | current | Enable or disable dmac hash for traffic. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.1.4 | Scalarl2ThashNewCfgDmacState | read-write | current | Enable or disable dmac hash for traffic. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.1.5 | Scalarl3ThashCurCfgIpUseL2State | read-only | current | Enable or disable L2 hash for IP traffic. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.1.6 | Scalarl3ThashNewCfgIpUseL2State | read-write | current | Enable or disable L2 hash for IP traffic. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.1.7 | Scalarl3ThashCurCfgSipState | read-only | current | Enable or disable sip hash for IP traffic. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.1.8 | Scalarl3ThashNewCfgSipState | read-write | current | Enable or disable sip hash for IP traffic. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.1.9 | Scalarl3ThashCurCfgDipState | read-only | current | Enable or disable dip hash for IP traffic. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.1.10 | Scalarl3ThashNewCfgDipState | read-write | current | Enable or disable dip hash for IP traffic. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.1.11 | Scalarl2ThashCurCfgIngressState | read-only | current | Enable or disable ingres port hash. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.1.12 | Scalarl2ThashNewCfgIngressState | read-write | current | Enable or disable ingres port hash. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.1.13 | Scalarl3ThashCurCfgL4PortState | read-only | current | Enable or disable L4 port hash. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.1.14 | Scalarl3ThashNewCfgL4PortState | read-write | current | Enable or disable L4 port hash. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.1.15 | ScalarstThashCurCfgLocalPreferenceState | read-only | current | Enable or disable dmlt local preference hash. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.1.16 | ScalarstThashNewCfgLocalPreferenceState | read-write | current | Enable or disable dmlt local preference hash. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.2 | NodethashFcoe | |||
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.2.1 | ScalarfcoeThashCurCfgSourceState | read-only | current | Enable or disable fcoe source-id hash. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.2.2 | ScalarfcoeThashNewCfgSourceState | read-write | current | Enable or disable fcoe source-id hash. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.2.3 | ScalarfcoeThashCurCfgDestinationState | read-only | current | Enable or disable fcoe destination-id hash. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.2.4 | ScalarfcoeThashNewCfgDestinationState | read-write | current | Enable or disable fcoe destination-id hash. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.2.5 | ScalarfcoeThashCurCfgCntagState | read-only | current | Enable or disable fcoe cntag-id hash. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.2.6 | ScalarfcoeThashNewCfgCntagState | read-write | current | Enable or disable fcoe cntag-id hash. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.2.7 | ScalarfcoeThashCurCfgOriginatorState | read-only | current | Enable or disable fcoe originator-id hash. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.2.8 | ScalarfcoeThashNewCfgOriginatorState | read-write | current | Enable or disable fcoe originator-id hash. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.2.9 | ScalarfcoeThashCurCfgResponderState | read-only | current | Enable or disable fcoe responder-id hash. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.2.10 | ScalarfcoeThashNewCfgResponderState | read-write | current | Enable or disable fcoe responder-id hash. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.2.11 | ScalarfcoeThashCurCfgFabricState | read-only | current | Enable or disable fcoe fabric-id hash. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.6.2.12 | ScalarfcoeThashNewCfgFabricState | read-write | current | Enable or disable fcoe fabric-id hash. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10 | NodefailoverCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.1 | ScalarfailoverCurCfgOnState | read-only | current | Failover ON/OFF setting. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.2 | ScalarfailoverNewCfgOnState | read-write | current | Failover ON/OFF settings. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.5 | ScalarfailoverMaxTriggerEntries | read-only | current | The maximum number of entries in the Failover Trigger Table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.6 | TablefailoverCurCfgTriggerTable | not-accessible | current | The Failover Trigger Table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1 | RowfailoverCurCfgTriggerTableEntry | not-accessible | current | A row in the Failover Trigger Table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.1 | ColumnfailoverCurCfgTriggerId | read-only | current | The Trigger identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.2 | ColumnfailoverCurCfgTriggerState | read-only | current | Enable or disable Trigger state |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.3 | ColumnfailoverCurCfgTriggerLimit | read-only | current | Limit # of operational links |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.6 | ColumnfailoverCurCfgTriggerMmonPort | read-only | current | The Manual Monitor port list. The ports are presented in bitmap format: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || … |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.7 | ColumnfailoverCurCfgTriggerMmonTrunk | read-only | current | The Manual Monitor trunk list. The trunks are presented in bitmap format: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7… |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.8 | ColumnfailoverCurCfgTriggerMmonKey | read-only | current | The LACP admin key. This is an array of 16-bit read-only values. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.9 | ColumnfailoverCurCfgTriggerMconPort | read-only | current | The Manual Control port list. The ports are presented in bitmap format: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || … |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.10 | ColumnfailoverCurCfgTriggerMconVport | read-only | current | The Manual Control vPort list |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.11 | ColumnfailoverCurCfgTriggerMconTrunk | read-only | current | The Manual Control trunk list. The trunks are presented in bitmap format: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7… |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.12 | ColumnfailoverCurCfgTriggerMconKey | read-only | current | The LACP admin key. This is an array of 16-bit read-only values. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.6.1.13 | ColumnfailoverCurCfgFabricPathMonitor | read-only | current | Enable or disable Failover Fabric Path monitoring |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7 | TablefailoverNewCfgTriggerTable | not-accessible | current | The Failover Trigger Table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1 | RowfailoverNewCfgTriggerTableEntry | not-accessible | current | A row in the Failover Trigger Table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.1 | ColumnfailoverNewCfgTriggerId | read-only | current | The Trigger identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.2 | ColumnfailoverNewCfgTriggerState | read-write | current | Enable or disable Trigger state |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.3 | ColumnfailoverNewCfgTriggerLimit | read-write | current | Limit # of operational links |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.10 | ColumnfailoverNewCfgTriggerMmonPort | read-only | current | The Manual Monitor port list. The ports are presented in bitmap format: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || … |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.11 | ColumnfailoverNewCfgTriggerMmonPortIndexAdd | read-create | current | Add port to Manual Monitor. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.12 | ColumnfailoverNewCfgTriggerMmonPortIndexRem | read-create | current | Remove port from Manual Monitor. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.13 | ColumnfailoverNewCfgTriggerMmonTrunk | read-only | current | The Manual Monitor trunk list. The trunks are presented in bitmap format: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7… |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.14 | ColumnfailoverNewCfgTriggerMmonTrunkAdd | read-create | current | Add trunk to Manual Monitor. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.15 | ColumnfailoverNewCfgTriggerMmonTrunkRem | read-create | current | Remove trunk from Manual Monitor. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.16 | ColumnfailoverNewCfgTriggerMmonKey | read-only | current | The LACP admin key. This is an array of 16-bit read-only values. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.17 | ColumnfailoverNewCfgTriggerMmonKeyAdd | read-create | current | Add LACP admin key to Manual Monitor. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.18 | ColumnfailoverNewCfgTriggerMmonKeyRem | read-create | current | Remove LACP admin key from Manual Monitor. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.19 | ColumnfailoverNewCfgTriggerMconPort | read-only | current | The Manual Control port list. The ports are presented in bitmap format: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || … |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.20 | ColumnfailoverNewCfgTriggerMconPortIndexAdd | read-create | current | Add port to Manual Control. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.21 | ColumnfailoverNewCfgTriggerMconPortIndexRem | read-create | current | Remove port from Manual Control. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.22 | ColumnfailoverNewCfgTriggerMconVport | read-only | current | The Manual Control vPort list |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.23 | ColumnfailoverNewCfgTriggerMconVportAdd | read-create | current | Add vPort to Manual Control. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.24 | ColumnfailoverNewCfgTriggerMconVportRem | read-create | current | Remove vPort from Manual Control. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.25 | ColumnfailoverNewCfgTriggerMconTrunk | read-only | current | The Manual Control trunk list. The trunks are presented in bitmap format: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7… |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.26 | ColumnfailoverNewCfgTriggerMconTrunkAdd | read-create | current | Add trunk to Manual Control. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.27 | ColumnfailoverNewCfgTriggerMconTrunkRem | read-create | current | Remove trunk from Manual Control. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.28 | ColumnfailoverNewCfgTriggerMconKey | read-only | current | The LACP admin key. This is an array of 16-bit read-only values. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.29 | ColumnfailoverNewCfgTriggerMconKeyAdd | read-create | current | Add LACP admin key to Manual Control. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.30 | ColumnfailoverNewCfgTriggerMconKeyRem | read-create | current | Remove LACP admin key from Manual Control. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.31 | ColumnfailoverNewCfgTriggerDelete | read-create | current | Setting the value to delete(2) will delete the entire row. When read, other(1) is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.32 | ColumnfailoverNewCfgFabricPathMonitor | read-write | current | Enable or disable Failover Fabric Path monitoring |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.33 | ColumnfailoverNewCfgTriggerMmonPortAliasAdd | read-create | current | Add port to Manual Monitor using its alias. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.34 | ColumnfailoverNewCfgTriggerMmonPortAliasRem | read-create | current | Remove port from Manual Monitor using its alias. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.35 | ColumnfailoverNewCfgTriggerMconPortAliasAdd | read-create | current | Add port to Manual Control using its alias. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.10.7.1.36 | ColumnfailoverNewCfgTriggerMconPortAliasRem | read-create | current | Remove port from Manual Control using its alias. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.13 | Nodefdb | |||
| 1.3.6.1.4.1.20301.2.7.21.2.1.13.1 | NodefdbGeneralCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.2.1.13.1.1 | ScalarfdbCurCfgAgingTime | read-only | current | Fdb current aging time |
| 1.3.6.1.4.1.20301.2.7.21.2.1.13.1.2 | ScalarfdbNewCfgAgingTime | read-write | current | Fdb new aging time. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14 | NodehotlinksCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.1 | ScalarhotlinksCurCfgOnState | read-only | current | Hot Links ON/OFF setting. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.2 | ScalarhotlinksNewCfgOnState | read-write | current | Hot Links ON/OFF settings. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.3 | ScalarhotlinksCurCfgFdbUpdateState | read-only | current | Enable/disable Hot Links FDB Update setting. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.4 | ScalarhotlinksNewCfgFdbUpdateState | read-write | current | Enable/disable Hot Links FDB Update setting. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.5 | ScalarhotlinksMaxTriggerEntries | read-only | current | The maximum number of entries in the Hot Links Trigger Table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.6 | TablehotlinksCurCfgTriggerTable | not-accessible | current | The Hot Links Trigger Table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1 | RowhotlinksCurCfgTriggerTableEntry | not-accessible | current | A row in the Hot Links Trigger Table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.1 | ColumnhotlinksCurCfgTriggerId | read-only | current | The Trigger identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.2 | ColumnhotlinksCurCfgTriggerName | read-only | current | A textual string containing the trigger name. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.3 | ColumnhotlinksCurCfgTriggerState | read-only | current | Enable/disable Trigger state. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.4 | ColumnhotlinksCurCfgTriggerPreemptState | read-only | current | Enable/disable Preemption state. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.5 | ColumnhotlinksCurCfgTriggerFdelay | read-only | current | Forward Delay setting (in secs). |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.6 | ColumnhotlinksCurCfgTriggerMasterPortIndex | read-only | current | The master interface port number. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.7 | ColumnhotlinksCurCfgTriggerMasterTrunk | read-only | current | The master interface trunk number. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.8 | ColumnhotlinksCurCfgTriggerBackupPortIndex | read-only | current | The backup interface port number. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.9 | ColumnhotlinksCurCfgTriggerBackupTrunk | read-only | current | The backup interface trunk number. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.10 | ColumnhotlinksCurCfgTriggerDelete | read-only | current | Delete a Hot Links trigger configuration. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.11 | ColumnhotlinksCurCfgTriggerMasterAdminkey | read-only | current | The master interface admin key number. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.12 | ColumnhotlinksCurCfgTriggerBackupAdminkey | read-only | current | The backup interface admin key number. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.13 | ColumnhotlinksCurCfgTriggerMode | read-only | current | The current mode of the Hot Links trigger entry: portMode - either the master or the backup interface will be active and forwarding traffic while the other int… |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.14 | ColumnhotlinksCurCfgTriggerBackupPreferVLANs | read-only | current | Trigger backup preferred VLANs. The value of this object identifies one or more VLANs whose traffic will be carried by the backup interface when the associated… |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.17 | ColumnhotlinksCurCfgTriggerMasterPortAlias | read-only | current | The master interface port alias. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.6.1.18 | ColumnhotlinksCurCfgTriggerBackupPortAlias | read-only | current | The backup interface port alias. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7 | TablehotlinksNewCfgTriggerTable | not-accessible | current | The Hot Links Trigger Table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1 | RowhotlinksNewCfgTriggerTableEntry | not-accessible | current | A row in the Hot Links Trigger Table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.1 | ColumnhotlinksNewCfgTriggerId | read-only | current | The Trigger identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.2 | ColumnhotlinksNewCfgTriggerName | read-write | current | A textual string containing the trigger name. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.3 | ColumnhotlinksNewCfgTriggerState | read-write | current | Enable/disable Trigger state. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.4 | ColumnhotlinksNewCfgTriggerPreemptState | read-write | current | Enable/disable Preemption state. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.5 | ColumnhotlinksNewCfgTriggerFdelay | read-write | current | Forward Delay setting (in secs). |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.6 | ColumnhotlinksNewCfgTriggerMasterPortIndex | read-write | current | The master interface port number. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.7 | ColumnhotlinksNewCfgTriggerMasterTrunk | read-write | current | The master interface trunk number. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.8 | ColumnhotlinksNewCfgTriggerBackupPortIndex | read-write | current | The backup interface port number. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.9 | ColumnhotlinksNewCfgTriggerBackupTrunk | read-write | current | The backup interface trunk number. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.10 | ColumnhotlinksNewCfgTriggerDelete | read-write | current | Delete a Hot Links trigger configuration. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.11 | ColumnhotlinksNewCfgTriggerMasterAdminkey | read-write | current | The master interface admin key number. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.12 | ColumnhotlinksNewCfgTriggerBackupAdminkey | read-write | current | The backup interface admin key number. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.13 | ColumnhotlinksNewCfgTriggerMode | read-write | current | The new mode of the Hot Links trigger entry: portMode - either the master or the backup interface will be active and forwarding traffic while the other interfa… |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.14 | ColumnhotlinksNewCfgTriggerBackupPreferVLANs | read-write | current | Trigger backup preferred VLANs. The value of this object identifies one or more VLANs whose traffic will be carried by the backup interface when the associated… |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.15 | ColumnhotlinksNewCfgTriggerBackupAddPreferVlan | read-write | current | Add a VLAN as the backup interface's preferred VLAN. If read, it will always return value 0. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.16 | ColumnhotlinksNewCfgTriggerBackupRemovePreferVlan | read-write | current | Remove a VLAN from the backup interface's preferred VLANs. If read, it will always return value 0. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.17 | ColumnhotlinksNewCfgTriggerMasterPortAlias | read-write | current | The master interface port alias. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.7.1.18 | ColumnhotlinksNewCfgTriggerBackupPortAlias | read-write | current | The backup interface port alias. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.10 | ScalarhotlinksCurCfgFdbUpdateRate | read-only | current | Hot Links FDB update rate (packets per second). |
| 1.3.6.1.4.1.20301.2.7.21.2.1.14.11 | ScalarhotlinksNewCfgFdbUpdateRate | read-write | current | Hot Links FDB update rate (packets per second). |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15 | NodelldpCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.1 | ScalarlldpPortTableMaxEnt | read-only | current | The maximum number of rows in the port configuration host table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2 | TablelldpCurCfgPortTable | not-accessible | current | The table of LLDP port configuration in the current_configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1 | RowlldpCurCfgPortEntry | not-accessible | current | A row in the LLDP port configuration table in the current_configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.1 | ColumnlldpCurCfgPortIndx | read-only | current | The index of the row in LLDP port configurations table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.2 | ColumnlldpCurCfgPortAdmStat | read-only | current | This is the admin status of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.3 | ColumnlldpCurCfgPortSnmpTrap | read-only | current | This is the SNMP trap notification state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.4 | ColumnlldpCurCfgPortportdesctlv | read-only | current | This is the Port Description TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.5 | ColumnlldpCurCfgPortsysnametlv | read-only | current | This is the System Name TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.6 | ColumnlldpCurCfgPortsysdescrtlv | read-only | current | This is the System Description TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.7 | ColumnlldpCurCfgPortsyscaptlv | read-only | current | This is the System Capabilities TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.8 | ColumnlldpCurCfgPortmgmtaddrtlv | read-only | current | This is the Management Address TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.9 | ColumnlldpCurCfgPortportvidtlv | read-only | current | This is the Port VLAN ID TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.10 | ColumnlldpCurCfgPortportprottlv | read-only | current | This is the Port and Protocol VLAN ID TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.11 | ColumnlldpCurCfgPortvlannametlv | read-only | current | This is the VLAN Name TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.12 | ColumnlldpCurCfgPortprotidtlv | read-only | current | This is the Protocol Identity TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.13 | ColumnlldpCurCfgPortmacphytlv | read-only | current | This is the MAC/PHY Configuration/Status TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.14 | ColumnlldpCurCfgPortpowermditlv | read-only | current | This is the Power Via MDI TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.15 | ColumnlldpCurCfgPortlinkaggrtlv | read-only | current | This is the Link Aggregation TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.16 | ColumnlldpCurCfgPortframesztlv | read-only | current | This is the Maximum Frame Size TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.17 | ColumnlldpCurCfgPortdcbxtlv | read-only | current | This is the DCBX TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.2.1.20 | ColumnlldpCurCfgPortAlias | read-only | current | The alias of the row in LLDP port configurations table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3 | TablelldpNewCfgPortTable | not-accessible | current | The table of LLDP port configuration in the new_configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1 | RowlldpNewCfgPortEntry | not-accessible | current | A row in the LLDP port configuration table in the new_configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.1 | ColumnlldpNewCfgPortIndx | read-only | current | The index of the row in LLDP port configurations table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.2 | ColumnlldpNewCfgPortAdmStat | read-write | current | This is the admin status of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.3 | ColumnlldpNewCfgPortSnmpTrap | read-write | current | This is the SNMP trap notification state of the LLDP port |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.4 | ColumnlldpNewCfgPortportdesctlv | read-write | current | This is the Port Description TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.5 | ColumnlldpNewCfgPortsysnametlv | read-write | current | This is the System Name TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.6 | ColumnlldpNewCfgPortsysdescrtlv | read-write | current | This is the System Description TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.7 | ColumnlldpNewCfgPortsyscaptlv | read-write | current | This is the System Capabilities TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.8 | ColumnlldpNewCfgPortmgmtaddrtlv | read-write | current | This is the Management Address TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.9 | ColumnlldpNewCfgPortportvidtlv | read-write | current | This is the Port VLAN ID TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.10 | ColumnlldpNewCfgPortportprottlv | read-write | current | This is the Port and Protocol VLAN ID TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.11 | ColumnlldpNewCfgPortvlannametlv | read-write | current | This is the VLAN Name TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.12 | ColumnlldpNewCfgPortprotidtlv | read-write | current | This is the Protocol Identity TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.13 | ColumnlldpNewCfgPortmacphytlv | read-write | current | This is the MAC/PHY Configuration/Status TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.14 | ColumnlldpNewCfgPortpowermditlv | read-write | current | This is the Power Via MDI TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.15 | ColumnlldpNewCfgPortlinkaggrtlv | read-write | current | This is the Link Aggregation TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.16 | ColumnlldpNewCfgPortframesztlv | read-write | current | This is the Maximum Frame Size TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.17 | ColumnlldpNewCfgPortalltlv | read-write | current | Set the corresponding state for all the LLDP port's TLVs. other(3) is returned when the object is read. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.18 | ColumnlldpNewCfgPortdcbxtlv | read-write | current | This is the DCBX TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.3.1.20 | ColumnlldpNewCfgPortAlias | read-only | current | The port of the row in LLDP port configurations table. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.4 | NodelldpGeneral | |||
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.4.1 | ScalarlldpCurCfgState | read-only | current | LLDP global state. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.4.2 | ScalarlldpNewCfgState | read-write | current | Globally turn LLDP on or off. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.4.3 | ScalarlldpCurCfgMsgTxInt | read-only | current | LLDP message transmission interval for LLDPDU. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.4.4 | ScalarlldpNewCfgMsgTxInt | read-write | current | LLDP message transmission interval for LLDPDU. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.4.5 | ScalarlldpCurCfgMsgTxHld | read-only | current | LLDP message transmission holdtime-multiplier. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.4.6 | ScalarlldpNewCfgMsgTxHld | read-write | current | LLDP message transmission holdtime-multiplier. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.4.7 | ScalarlldpCurCfgNotifInt | read-only | current | LLDP minimum SNMP trap notification interval. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.4.8 | ScalarlldpNewCfgNotifInt | read-write | current | LLDP minimum SNMP trap notification interval. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.4.9 | ScalarlldpCurCfgTxDelay | read-only | current | LLDP delay interval between advertisements. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.4.10 | ScalarlldpNewCfgTxDelay | read-write | current | LLDP delay interval between advertisements. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.4.11 | ScalarlldpCurCfgReinitDelay | read-only | current | LLDP reinit delay interval. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.15.4.12 | ScalarlldpNewCfgReinitDelay | read-write | current | LLDP reinit delay interval. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.19 | NodeecpCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.2.1.19.1 | ScalarecpCurCfgRetrans | read-only | current | The ECP retransmission interval in millisecond |
| 1.3.6.1.4.1.20301.2.7.21.2.1.19.2 | ScalarecpNewCfgRetrans | read-write | current | The ECP retransmission interval in millisecond |
| 1.3.6.1.4.1.20301.2.7.21.2.1.20 | NodeslpCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.2.1.20.1 | ScalarslpCurCfgGlobalEnable | read-only | current | Current SLP global status on switch. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.20.2 | ScalarslpNewCfgGlobalEnable | read-write | current | Set to enabled to enable SLP globally or Set to disabled to disable SLP globally on switch. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.20.3 | ScalarslpCurCfgActiveDaDisEnable | read-only | current | Current SLP active directory agent discovery status on switch. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.20.4 | ScalarslpNewCfgActiveDaDisEnable | read-write | current | Set to enabled to enable SLP active directory agent discovery or Set to disabled to disable SLP active directory agent discovery on switch. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.20.5 | ScalarslpCurCfgActiveDaDisStartWaitTime | read-only | current | Current SLP active directory agent discovery start wait time measured in seconds. |
| 1.3.6.1.4.1.20301.2.7.21.2.1.20.6 | ScalarslpNewCfgActiveDaDisStartWaitTime | read-write | current | This object is used to change the SLP active directory agent discovery start wait time measured in seconds. |
| 1.3.6.1.4.1.20301.2.7.21.2.2 | Nodelayer2Stats | |||
| 1.3.6.1.4.1.20301.2.7.21.2.2.1 | NodefdbStats | |||
| 1.3.6.1.4.1.20301.2.7.21.2.2.1.3 | ScalarfdbStatsCurrent | read-only | current | Current number of entries in the Forwarding Database. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.1.4 | ScalarfdbStatsHiwat | read-only | current | Highest number of entries recorded at any given time in the Forwarding Database. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.1.11 | ScalarfdbStatsClear | read-write | current | Clear FDB statistics |
| 1.3.6.1.4.1.20301.2.7.21.2.2.4 | NodelacpStats | |||
| 1.3.6.1.4.1.20301.2.7.21.2.2.4.1 | TablelacpStatsTable | not-accessible | current | The table of LACP Stats. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1 | RowlacpStatsTableEntry | not-accessible | current | Lacp status info. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.1 | ColumnlacpStatsIndex | read-only | current | Index |
| 1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.2 | ColumnlacpdusRx | read-only | current | Valid LACPDUs received |
| 1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.3 | ColumnmarkerpdusRx | read-only | current | Valid Marker PDUs received |
| 1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.4 | ColumnmarkerresponsepdusRx | read-only | current | Valid Marker Rsp PDUs received |
| 1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.5 | ColumnunknownRx | read-only | current | Unknown version/TLV type |
| 1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.6 | ColumnillegalRx | read-only | current | Illegal subtype received |
| 1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.7 | ColumnlacpdusTx | read-only | current | LACPDUs transmitted |
| 1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.8 | ColumnmarkerpdusTx | read-only | current | Market PDUs transmitted |
| 1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.9 | ColumnmarkerresponsepdusTx | read-only | current | Marker Rsp PDUs transmitted |
| 1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.10 | ColumnlacpClearStats | read-write | current | Setting this to clear(2) results in clearing the LACP statistics. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.4.1.1.11 | ColumnlacpStatsPortAlias | read-only | current | Port Alias. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.6 | NodehotlinksStats | |||
| 1.3.6.1.4.1.20301.2.7.21.2.2.6.1 | TablehotlinksStatsTriggerTable | not-accessible | current | The Hot Links Trigger Table Stats. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1 | RowhotlinksStatsTriggerTableEntry | not-accessible | current | A row in the Hot Links Trigger Table Stats. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1.1 | ColumnhotlinksStatsTriggerId | read-only | current | The Trigger identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1.2 | ColumnhotlinksStatsTriggerName | read-only | current | A textual string containing the trigger name. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1.3 | ColumnhotlinksStatsTriggerMasterActive | read-only | current | The number of times the master interface was set to active. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1.4 | ColumnhotlinksStatsTriggerBackupActive | read-only | current | The number of times the backup interface was set to active. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1.5 | ColumnhotlinksStatsTriggerFdbUpdate | read-only | current | The number of times an FDB update was performed. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.6.1.1.6 | ColumnhotlinksStatsTriggerFdbFailed | read-only | current | The number of times an FDB update failed. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.7 | NodelldpStats | |||
| 1.3.6.1.4.1.20301.2.7.21.2.2.7.1 | ScalarlldpStatsTableMaxEnt | read-only | current | The maximum number of rows in the statistics host table. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.7.2 | TablelldpStatsTable | not-accessible | current | The table of LLDP statistics. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1 | RowlldpStatsTableEntry | not-accessible | current | LLDP statistics info. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.1 | ColumnlldpStatsIndex | read-only | current | The index of the row in LLDP port statistics. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.2 | ColumnlldpStatsFramesOutTotal | read-only | current | The total number of LLDP frames transmitted in this port. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.3 | ColumnlldpStatsFramesInTotal | read-only | current | The total number of LLDP frames received in this port. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.4 | ColumnlldpStatsFramesInErrorsTotal | read-only | current | The total number of erroneous LLDP frames received in this port. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.5 | ColumnlldpStatsFramesDiscardedTotal | read-only | current | The total number of received LLDP frames discarded in this port. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.6 | ColumnlldpStatsTLVsUnrecognizedTotal | read-only | current | The total number of unrecognized TLVs in this port. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.7 | ColumnlldpStatsAgeoutsTotal | read-only | current | The total number of neighbor's information deleted in this port. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.8 | ColumnlldpStatsClear | read-write | current | Setting this to clear(2) results in clearing the LLDP statistics. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.7.2.1.9 | ColumnlldpStatsPortAlias | read-only | current | The alias of the row in LLDP port statistics. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.7.3 | ScalarlldpStatsClearAll | read-write | current | Setting this to clear(2) results in clearing the LLDP statistics for all the ports. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.12 | NodeslpStats | |||
| 1.3.6.1.4.1.20301.2.7.21.2.2.12.1 | TableslpStatsTxCountersTable | not-accessible | current | A table with all the SLP Send counters. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.12.1.1 | RowslpStatsTxCounterEntry | not-accessible | current | The configuration objects for a SLP Send counter entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.12.1.1.1 | ColumnslpTxCounterIndex | read-only | current | The index of this counter. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.12.1.1.2 | ColumnslpTxCounterName | read-only | current | The name of this counter. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.12.1.1.3 | ColumnslpTxCounterUnicast | read-only | current | The unicast value of this counter. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.12.1.1.4 | ColumnslpTxCounterMulticast | read-only | current | The multicast value of this counter. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.12.2 | TableslpStatsRxCountersTable | not-accessible | current | A table with all the SLP Receive counters. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.12.2.1 | RowslpStatsRxCounterEntry | not-accessible | current | The configuration objects for a SLP Receive counter entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.12.2.1.1 | ColumnslpRxCounterIndex | read-only | current | The index this counter. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.12.2.1.2 | ColumnslpRxCounterName | read-only | current | The name of this counter. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.12.2.1.3 | ColumnslpRxCounterUnicast | read-only | current | The unicast value of this counter. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.12.2.1.4 | ColumnslpRxCounterMulticast | read-only | current | The multicast value of this counter. |
| 1.3.6.1.4.1.20301.2.7.21.2.2.12.3 | ScalarslpCountersClear | read-write | current | Setting this object to 'clear' will reset all SLP counters. A get action of this object will always return 'other'. Setting this object to 'other' is not allow… |
| 1.3.6.1.4.1.20301.2.7.21.2.3 | Nodelayer2Info | |||
| 1.3.6.1.4.1.20301.2.7.21.2.3.1 | NodefdbInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.2.3.1.1 | ScalarfdbClear | read-write | current | Setting this value to clear(2) clears the entire master FDB. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.1.2 | TablefdbTable | not-accessible | current | The table of FDB entries. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1 | RowfdbEntry | not-accessible | current | A row in the FDB table |
| 1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.1 | ColumnfdbMacAddr | read-only | current | The MAC address for the FDB entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.2 | ColumnfdbVlan | read-only | current | The VLAN ID for the FDB entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.3 | ColumnfdbSrcPortIndex | read-only | current | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance has been seen. A… |
| 1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.4 | ColumnfdbState | read-only | current | The state of the FDB entry. The meanings of the values are : unknown(1) : the MAC address has not yet been learned by the switch but has only been seen as a de… |
| 1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.7 | ColumnfdbSrcTrunk | read-only | current | Either the value '0', or the trunk number of the trunk on which a frame having a source address equal to the value of the corresponding instance has been seen.… |
| 1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.8 | ColumnfdbStatus | read-only | current | '1' if it is permanent '0' if it is not permanent |
| 1.3.6.1.4.1.20301.2.7.21.2.3.1.2.1.9 | ColumnfdbSrcPortAlias | read-only | current | Either the value '0', or the port alias of the port on which a frame having a source address equal to the value of the corresponding instance has been seen. A … |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3 | NodelacpInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.1 | TablelacpInfoAggrTable | not-accessible | current | The table of LACP aggregator information. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1 | RowlacpInfoAggrTableEntry | not-accessible | current | Information about a LACP aggregator. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.1 | ColumnlacpInfoAggrIndex | read-only | current | The aggregator identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.2 | ColumnlacpInfoAggrId | read-only | current | LACP aggregator ID |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.3 | ColumnlacpInfoAggrMac | read-only | current | LACP aggregator MAC address |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.4 | ColumnlacpInfoAggrActSysPrio | read-only | current | LACP aggregator actor system priority |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.5 | ColumnlacpInfoAggrActSysId | read-only | current | LACP aggregator actor system ID |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.6 | ColumnlacpInfoAggrIndivState | read-only | current | LACP aggregator individual state |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.7 | ColumnlacpInfoAggrActAdminKey | read-only | current | LACP aggregator actor admin key |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.8 | ColumnlacpInfoAggrActOperKey | read-only | current | LACP aggregator actor oper key |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.9 | ColumnlacpInfoAggrPartSysPrio | read-only | current | LACP aggregator partner system priority |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.10 | ColumnlacpInfoAggrPartSysId | read-only | current | LACP aggregator partner system ID |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.11 | ColumnlacpInfoAggrPartOperKey | read-only | current | LACP aggregator partner oper key |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.12 | ColumnlacpInfoAggrReadyState | read-only | current | LACP aggregator ready state |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.13 | ColumnlacpInfoAggrNumPorts | read-only | current | Number of ports in aggregator |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.1.1.15 | ColumnlacpInfoAggrMinLinks | read-only | current | Min Links of ports in aggregator |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2 | NodelacpInfoPort | |||
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1 | TablelacpInfoPortGeneralTable | not-accessible | current | The table of LACP port general information. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1 | RowlacpInfoPortGeneralTableEntry | not-accessible | current | General information about a LACP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.1 | ColumnlacpInfoPortGeneralIndex | read-only | current | The port identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.2 | ColumnlacpInfoPortLacpEna | read-only | current | LACP enabled on port |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.3 | ColumnlacpInfoPortAdminEna | read-only | current | LACP port admin enabled |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.4 | ColumnlacpInfoPortActSysId | read-only | current | LACP port actor system ID |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.5 | ColumnlacpInfoPortActSysPrio | read-only | current | LACP port actor system priority |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.6 | ColumnlacpInfoPortActAdminKey | read-only | current | LACP port actor admin key |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.7 | ColumnlacpInfoPortActOperKey | read-only | current | LACP port actor oper key |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.8 | ColumnlacpInfoPortActPortNum | read-only | current | LACP port number |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.9 | ColumnlacpInfoPortActPortPrio | read-only | current | LACP port priority |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.10 | ColumnlacpInfoPortIndivState | read-only | current | LACP port individual state |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.11 | ColumnlacpInfoSelAggrId | read-only | current | LACP port selected aggregator ID |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.12 | ColumnlacpInfoAttAggrId | read-only | current | LACP port attached aggregator ID |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.13 | ColumnlacpInfoPortReadyN | read-only | current | True value for Ready_N flag indicates that the wait while timer has expired and it is waiting to attach to an aggregator. There is one Ready_N value for each p… |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.14 | ColumnlacpInfoPortNtt | read-only | current | Need to transmit flag. True indicates that there is new protocol information that should be transmitted on the link. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.15 | ColumnlacpInfoPortSelected | read-only | current | Selected flag value indicates that the selection logic has selected an appropriate Aggregator. A value of unselected indicates that no aggregator is currently … |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.16 | ColumnlacpInfoPortMoved | read-only | current | Port Moved flag is set to true if the receive machine for a port is in the port_disabled state, and the combination of partner oper system and partner oper por… |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.17 | ColumnlacpInfoCollDetState | read-only | current | LACP port collision and detection state |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.18 | ColumnlacpInfoPortRxState | read-only | current | LACP port RX machine state |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.19 | ColumnlacpInfoPortMuxState | read-only | current | LACP port Mux machine state |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.20 | ColumnlacpInfoPortPerState | read-only | current | LACP port periodic machine state |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.21 | ColumnlacpInfoPortPerTraTimer | read-only | current | Periodic Transmit Timer |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.22 | ColumnlacpInfoPortCurWhileTimer | read-only | current | Current While Timer |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.23 | ColumnlacpInfoPortOperState | read-only | current | The current operational state of LACP on the port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.24 | ColumnlacpInfoPortGeneralPortAlias | read-only | current | The port alias. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.1.1.25 | ColumnlacpInfoPortActPortAlias | read-only | current | LACP port alias. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2 | TablelacpInfoPortAdminTable | not-accessible | current | The table of LACP port admin information. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1 | RowlacpInfoPortAdminTableEntry | not-accessible | current | Admin information about a LACP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.1 | ColumnlacpInfoPortAdminIndex | read-only | current | The port identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.7 | ColumnlacpInfoPortActAdPortState | read-only | current | The state of Actor Administrator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggreg… |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.8 | ColumnlacpInfoPortActAdActiv | read-only | current | The state of Actor Administrator Port Activity |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.9 | ColumnlacpInfoPortActAdSync | read-only | current | The state of Actor Administrator Port Synchronization |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.10 | ColumnlacpInfoPortActAdDef | read-only | current | The state of Actor Administrator Port Defaulted |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.11 | ColumnlacpInfoPortActAdTimeout | read-only | current | The state of Actor Administrator Port Timeout |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.12 | ColumnlacpInfoPortActAdColl | read-only | current | The state of Actor Administrator Port Collecting |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.13 | ColumnlacpInfoPortActAdExp | read-only | current | The state of Actor Administrator Port Expired |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.14 | ColumnlacpInfoPortActAdAggr | read-only | current | The state of Actor Administrator Port Aggregation |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.15 | ColumnlacpInfoPortActAdDist | read-only | current | The state of Actor Administrator Port Distributing |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.2.1.25 | ColumnlacpInfoPortAdminPortAlias | read-only | current | The port alias. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3 | TablelacpInfoPortOperTable | not-accessible | current | The table of LACP port oper information. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1 | RowlacpInfoPortOperTableEntry | not-accessible | current | Oper information about a LACP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.1 | ColumnlacpInfoPortOperIndex | read-only | current | The port identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.2 | ColumnlacpInfoPortPartOpSysPrio | read-only | current | The value of Partner Operator Port System Priority |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.3 | ColumnlacpInfoPortPartOpSysId | read-only | current | The value of Partner Operator Port System ID |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.4 | ColumnlacpInfoPortPartOpKey | read-only | current | The value of Partner Operator Port Key |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.5 | ColumnlacpInfoPortPartOpPortNum | read-only | current | The Partner Operator Port Number |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.6 | ColumnlacpInfoPortPartOpPortPrio | read-only | current | The value of Partner Operator Port Priority |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.7 | ColumnlacpInfoPortActOpPortState | read-only | current | The state of Actor Operator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregation… |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.8 | ColumnlacpInfoPortActOpActiv | read-only | current | The state of Actor Operator Port Activity |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.9 | ColumnlacpInfoPortActOpSync | read-only | current | The state of Actor Operator Port Synchronization |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.10 | ColumnlacpInfoPortActOpDef | read-only | current | The state of Actor Operator Port Defaulted |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.11 | ColumnlacpInfoPortActOpTimeout | read-only | current | The state of Actor Operator Port Timeout |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.12 | ColumnlacpInfoPortActOpColl | read-only | current | The state of Actor Operator Port Collecting |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.13 | ColumnlacpInfoPortActOpExp | read-only | current | The state of Actor Operator Port Expired |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.14 | ColumnlacpInfoPortActOpAggr | read-only | current | The state of Actor Operator Port Aggregation |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.15 | ColumnlacpInfoPortActOpDist | read-only | current | The state of Actor Operator Port Distributing |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.16 | ColumnlacpInfoPortPartOpPortState | read-only | current | The state of Partner Operator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregati… |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.17 | ColumnlacpInfoPortPartOpActiv | read-only | current | The state of Partner Operator Port Activity |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.18 | ColumnlacpInfoPortPartOpSync | read-only | current | The state of Partner Operator Port Synchronization |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.19 | ColumnlacpInfoPortPartOpDef | read-only | current | The state of Partner Operator Port Defaulted |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.20 | ColumnlacpInfoPortPartOpTimeout | read-only | current | The state of Partner Operator Port Timeout |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.21 | ColumnlacpInfoPortPartOpColl | read-only | current | The state of Partner Operator Port Collecting |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.22 | ColumnlacpInfoPortPartOpExp | read-only | current | The state of Partner Operator Port Expired |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.23 | ColumnlacpInfoPortPartOpAggr | read-only | current | The state of Partner Operator Port Aggregation |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.24 | ColumnlacpInfoPortPartOpDist | read-only | current | The state of Partner Operator Port Distributing |
| 1.3.6.1.4.1.20301.2.7.21.2.3.3.2.3.1.25 | ColumnlacpInfoPortOperPortAlias | read-only | current | The port alias. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.5 | NodevlanInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.2.3.5.1 | TablevlanInfoTable | not-accessible | current | The table of VLAN information. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.5.1.1 | RowvlanInfoTableEntry | not-accessible | current | Information about a particular VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.5.1.1.1 | ColumnvlanInfoId | read-only | current | The VLAN identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.5.1.1.2 | ColumnvlanInfoName | read-only | current | The VLAN name. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.5.1.1.3 | ColumnvlanInfoStatus | read-only | current | Enable or disable, VLAN state information |
| 1.3.6.1.4.1.20301.2.7.21.2.3.5.1.1.7 | ColumnvlanInfoPorts | read-only | current | The port list information in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ por… |
| 1.3.6.1.4.1.20301.2.7.21.2.3.9 | NodetrunkGroupInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.2.3.9.1 | TabletrunkGroupInfoTable | not-accessible | current | The table of trunk group information. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.9.1.1 | RowtrunkGroupInfoTableEntry | not-accessible | current | A row in trunk group information table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.9.1.1.1 | ColumntrunkGroupInfoIndex | read-only | current | The identifier of the trunk group. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.9.1.1.2 | ColumntrunkGroupInfoState | read-only | current | Trunk group state. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.9.1.1.3 | ColumntrunkGroupInfoPorts | read-only | current | The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 |… |
| 1.3.6.1.4.1.20301.2.7.21.2.3.9.1.1.4 | ColumntrunkGroupInfoProtocol | read-only | current | Trunk group protocol Static - static trunk group Lacp - dynamic trunk group |
| 1.3.6.1.4.1.20301.2.7.21.2.3.9.2 | TabletrunkGroupInfoPortTable | not-accessible | current | The table of Trunk Group Info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.9.2.1 | RowtrunkGroupInfoPortTableEntry | not-accessible | current | A row in the Trunk Info table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.9.2.1.1 | ColumntrunkGroupInfoPortTrunkId | read-only | current | The Trunk identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.9.2.1.2 | ColumntrunkGroupInfoPortPortId | read-only | current | The Port identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.9.2.1.3 | ColumntrunkGroupInfoPortStatus | read-only | current | The Port Status. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.9.2.1.4 | ColumntrunkGroupInfoPortAlias | read-only | current | The Port alaias. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.10 | NodehotlinksInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.2.3.10.1 | ScalarhotlinksInfoOnState | read-only | current | Hot Links ON/OFF setting info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.10.2 | ScalarhotlinksInfoFdbUpdateState | read-only | current | Enable/disable Hot Links FDB Update setting info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.10.3 | TablehotlinksInfoTriggerTable | not-accessible | current | The Hot Links Trigger Table Info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1 | RowhotlinksInfoTriggerTableEntry | not-accessible | current | A row in the Hot Links Trigger Table Info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.1 | ColumnhotlinksInfoTriggerId | read-only | current | The Trigger identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.2 | ColumnhotlinksInfoTriggerName | read-only | current | A textual string containing the trigger name. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.3 | ColumnhotlinksInfoTriggerState | read-only | current | Enable/disable Trigger state info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.4 | ColumnhotlinksInfoTriggerPreemptState | read-only | current | Enable/disable Preemption state info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.5 | ColumnhotlinksInfoTriggerFdelay | read-only | current | Forward Delay setting info (in secs). |
| 1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.6 | ColumnhotlinksInfoTriggerActive | read-only | current | A textual string containing the active interface info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.7 | ColumnhotlinksInfoTriggerMasterActiveVlans | read-only | current | The active VLANs on the master interface. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 8 || || || ||___ vlan 7 || |____ vlan… |
| 1.3.6.1.4.1.20301.2.7.21.2.3.10.3.1.8 | ColumnhotlinksInfoTriggerBackupActiveVlans | read-only | current | The active VLANs on the backup interface. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 8 || || || ||___ vlan 7 || |____ vlan… |
| 1.3.6.1.4.1.20301.2.7.21.2.3.10.5 | ScalarhotlinksInfoFdbUpdateRate | read-only | current | Hot Links FDB update rate (packets per second). |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11 | NodelldpInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1 | TablelldpInfoPortTable | not-accessible | current | The table of LLDP Port Info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1 | RowlldpInfoPortEntry | not-accessible | current | LLDP Port Info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.1 | ColumnlldpInfoPortIndex | read-only | current | The index of the row in LLDP info port table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.2 | ColumnlldpInfoPortAlias | read-only | current | The port alias of the port in LLDP info port table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.3 | ColumnlldpInfoPortMacAddress | read-only | current | The mac address of the port in LLDP info port table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.4 | ColumnlldpInfoPortMtu | read-only | current | The MTU size of the port in LLDP info port table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.5 | ColumnlldpInfoPortEnabled | read-only | current | The PortEnabled field of the port in LLDP info port table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.6 | ColumnlldpInfoPortAdminStatus | read-only | current | The Admin Status of the port in LLDP info port table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.7 | ColumnlldpInfoPortRxChanges | read-only | current | The rxChanges field of the port in LLDP info port table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.8 | ColumnlldpInfoPortportdesctlv | read-only | current | This is the Port Description TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.9 | ColumnlldpInfoPortsysnametlv | read-only | current | This is the System Name TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.10 | ColumnlldpInfoPortsysdescrtlv | read-only | current | This is the System Description TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.11 | ColumnlldpInfoPortsyscaptlv | read-only | current | This is the System Capabilities TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.12 | ColumnlldpInfoPortmgmtaddrtlv | read-only | current | This is the Management Address TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.13 | ColumnlldpInfoPortportvidtlv | read-only | current | This is the Port VLAN ID TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.14 | ColumnlldpInfoPortportprottlv | read-only | current | This is the Port and Protocol VLAN ID TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.15 | ColumnlldpInfoPortvlannametlv | read-only | current | This is the VLAN Name TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.16 | ColumnlldpInfoPortprotidtlv | read-only | current | This is the Protocol Identity TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.17 | ColumnlldpInfoPortmacphytlv | read-only | current | This is the MAC/PHY Configuration/Status TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.18 | ColumnlldpInfoPortpowermditlv | read-only | current | This is the Power Via MDI TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.19 | ColumnlldpInfoPortlinkaggrtlv | read-only | current | This is the Link Aggregation TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.20 | ColumnlldpInfoPortframesztlv | read-only | current | This is the Maximum Frame Size TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.1.1.21 | ColumnlldpInfoPortdcbxtlv | read-only | current | This is the DCBX TLV state of the LLDP port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.2 | TablelldpInfoTxTable | not-accessible | current | The table of LLDP Transmit State Machine Info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1 | RowlldpInfoTxEntry | not-accessible | current | LLDP Transmit State Machine Info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.1 | ColumnlldpInfoTxIndex | read-only | current | The index of the row in LLDP Transmit State Machine info table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.2 | ColumnlldpInfoTxState | read-only | current | The transmit state of the port in LLDP Transmit State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.3 | ColumnlldpInfoTxLocalChanged | read-only | current | The somethingChangedLocal field of the port in LLDP Transmit State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.4 | ColumnlldpInfoTxTTL | read-only | current | The txTTL timer of the port in LLDP Transmit State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.5 | ColumnlldpInfoTxTxTTR | read-only | current | The txTTR timer of the port in LLDP Transmit State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.6 | ColumnlldpInfoTxDelayWhile | read-only | current | The txDelayWhile timer of the port in LLDP Transmit State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.7 | ColumnlldpInfoTxShutdownWhile | read-only | current | The txShutdownWhile timer of the port in LLDP Transmit State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.8 | ColumnlldpInfoTxReinitDelay | read-only | current | The reinitDelay timer of the port in LLDP Transmit State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.9 | ColumnlldpInfoTxHoldMultiplier | read-only | current | The msgTxHold timer of the port in LLDP Transmit State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.10 | ColumnlldpInfoTxTransmitInterval | read-only | current | The msgTxInterval timer of the port in LLDP Transmit State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.11 | ColumnlldpInfoTxTransmitDelay | read-only | current | The txDelay timer of the port in LLDP Transmit State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.12 | ColumnlldpInfoTxDMAC | read-only | current | The Destination MAC address of the LLDP remote devices. Legend(possible values in DMAC column) : NB - Nearest Bridge - 01-80-C2-00-00-0E NnTB - Nearest non-TPM… |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.2.1.13 | ColumnlldpInfoTxPortAlias | read-only | current | The alias of the row in LLDP Transmit State Machine info table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.3 | TablelldpInfoRxTable | not-accessible | current | The table of LLDP Receive State Machine Info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1 | RowlldpInfoRxEntry | not-accessible | current | LLDP Receive State Machine Info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.1 | ColumnlldpInfoRxIndex | read-only | current | The index of the row in LLDP Receive State Machine info table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.2 | ColumnlldpInfoRxState | read-only | current | The receive state of the port in LLDP Receive State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.3 | ColumnlldpInfoRxBadFrame | read-only | current | The badFrame field of the port in LLDP Receive State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.4 | ColumnlldpInfoRxRcvFrame | read-only | current | The rcvFrame field of the port in LLDP Receive State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.5 | ColumnlldpInfoRxRxInfoAge | read-only | current | The rxInfoAge field of the port in LLDP Receive State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.6 | ColumnlldpInfoRxRemoteChanged | read-only | current | The somethingChangedRemote field of the port in LLDP Receive State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.7 | ColumnlldpInfoRxTooManyNeighbors | read-only | current | The tooManyNeighbors field of the port in LLDP Receive State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.8 | ColumnlldpInfoRxSNMPNotify | read-only | current | The tooManyNeighbors field of the port in LLDP Receive State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.9 | ColumnlldpInfoRxRxTTL | read-only | current | The rxTTL timer of the port in LLDP Receive State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.10 | ColumnlldpInfoRxTooManyNeighborTimer | read-only | current | The tooManyNeighborsTimer timer of the port in LLDP Receive State Machine. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.11 | ColumnlldpInfoRxDMAC | read-only | current | The Destination MAC address of the LLDP remote devices. Legend(possible values in DMAC column) : NB - Nearest Bridge - 01-80-C2-00-00-0E NnTB - Nearest non-TPM… |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.3.1.12 | ColumnlldpInfoRxPortAlias | read-only | current | The alias of the row in LLDP Receive State Machine info table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.4 | TablelldpInfoRemoteDevicesTable | not-accessible | current | The table of LLDP remote devices Info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1 | RowlldpInfoRemoteDevicesEntry | not-accessible | current | LLDP remote devices Info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.1 | ColumnlldpInfoRemoteDevicesIndex | read-only | current | The index of the row in LLDP remote devices info table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.3 | ColumnlldpInfoRemoteDevicesRemoteTTL | read-only | current | The remote TTL of the LLDP remote devices entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.4 | ColumnlldpInfoRemoteDevicesRxChanges | read-only | current | The rxChanges field of the LLDP remote devices entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.5 | ColumnlldpInfoRemoteDevicesLocalPort | read-only | current | The local port alias of the LLDP remote devices entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.6 | ColumnlldpInfoRemoteDevicesChassisSubtype | read-only | current | The chassis ID subtype of the LLDP remote devices entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.7 | ColumnlldpInfoRemoteDevicesChassisId | read-only | current | The chassis ID of the LLDP remote devices entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.8 | ColumnlldpInfoRemoteDevicesPortSubtype | read-only | current | The port ID subtype of the LLDP remote devices entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.9 | ColumnlldpInfoRemoteDevicesPortId | read-only | current | The port ID of the LLDP remote devices entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.10 | ColumnlldpInfoRemoteDevicesSystemName | read-only | current | The system name of the LLDP remote devices entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.11 | ColumnlldpInfoRemoteDevicesSystemDescription | read-only | current | The system description of the LLDP remote devices entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.12 | ColumnlldpInfoRemoteDevicesPortDescription | read-only | current | The port description of the LLDP remote devices entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.13 | ColumnlldpInfoRemoteDevicesSystemCapSupported | read-only | current | The supported system capabilities of the LLDP remote devices entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.14 | ColumnlldpInfoRemoteDevicesSystemCapEnabled | read-only | current | The enabled system capabilities of the LLDP remote devices entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.4.1.15 | ColumnlldpInfoRemoteDMAC | read-only | current | The Destination MAC address of the LLDP remote devices. Legend(possible values in DMAC column) : NB - Nearest Bridge - 01-80-C2-00-00-0E NnTB - Nearest non-TPM… |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.5 | TablelldpInfoRemoteDevicesManAddrTable | not-accessible | current | The table of LLDP remote devices management address Info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.5.1 | RowlldpInfoRemoteDevicesManAddrEntry | not-accessible | current | LLDP remote devices management address Info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.5.1.1 | ColumnlldpInfoRemoteDevicesManAddrSubtype | read-only | current | The management address subtype of the LLDP remote devices entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.5.1.2 | ColumnlldpInfoRemoteDevicesManAddr | read-only | current | The management address of the LLDP remote devices entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.5.1.3 | ColumnlldpInfoRemoteDevicesManAddrIfSubtype | read-only | current | The interface numbering subtype of the LLDP remote devices management address entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.5.1.4 | ColumnlldpInfoRemoteDevicesManAddrIfId | read-only | current | The interface number of the LLDP remote devices management address entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.5.1.5 | ColumnlldpInfoRemoteDevicesManAddrOID | read-only | current | The object identifier of the LLDP remote devices management address entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.11.6 | ScalarlldpClearMsap | read-write | current | Clear LLDP remote devices information when setting clearMsap(1). When read, ok(0) is always returned. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14 | NodefailoverInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.1 | ScalarfailoverInfoState | read-only | current | Current state of failover |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.3 | TablefailoverInfoTriggerTable | not-accessible | current | This table holds the information for individual triggers |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1 | RowfailoverInfoTriggerEntry | not-accessible | current | A row in the failover trigger table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.1 | ColumnfailoverInfoTriggerId | read-only | current | The trigger identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.2 | ColumnfailoverInfoTriggerState | read-only | current | The trigger state. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.3 | ColumnfailoverInfoTriggerLimit | read-only | current | Limit number of operational links |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.4 | ColumnfailoverInfoTriggerMonitorState | read-only | current | The runtime monitor state |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.5 | ColumnfailoverInfoTriggerMonitorPorts | read-only | current | The list of ports that are monitored. The ports are represented in bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ por… |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.6 | ColumnfailoverInfoTriggerControlState | read-only | current | The runtime control state |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.7 | ColumnfailoverInfoTriggerControlPorts | read-only | current | The list of ports that are controlled. The ports are represented in bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ po… |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.8 | ColumnfailoverInfoTriggerControlVports | read-only | current | The list of vPorts that are monitored |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.3.1.9 | ColumnfailoverInfoTriggerFabricPathMonitor | read-only | current | The Fabric Path monitoring State |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.4 | TablefailoverInfoMonPortStateTable | not-accessible | current | This table holds the information for individual triggers |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.4.1 | RowfailoverInfoTriggerMonPortEntry | not-accessible | current | A row in the failover trigger table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.4.1.1 | ColumnfailoverInfoTriggerMonId | read-only | current | The trigger identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.4.1.2 | ColumnfailoverInfoTriggerMonPortId | read-only | current | The Port identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.4.1.3 | ColumnfailoverInfoTriggerMonPortStatus | read-only | current | The Port Status. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.4.1.4 | ColumnfailoverInfoTriggerMonPortAlias | read-only | current | The Port alias. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.5 | TablefailoverInfoCtlPortStateTable | not-accessible | current | This table holds the information for individual triggers |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.5.1 | RowfailoverInfoTriggerCtlPortEntry | not-accessible | current | A row in the failover trigger table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.5.1.1 | ColumnfailoverInfoTriggerCtlId | read-only | current | The trigger identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.5.1.2 | ColumnfailoverInfoTriggerCtlPortId | read-only | current | The Port identifier. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.5.1.3 | ColumnfailoverInfoTriggerCtlPortStatus | read-only | current | The Port Status. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.5.1.4 | ColumnfailoverInfoTriggerCtlPortAlias | read-only | current | The Port alias. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.6 | TablefailoverInfoCtlVportStateTable | not-accessible | current | This table holds the information for individual triggers |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.6.1 | RowfailoverInfoTriggerCtlVportEntry | not-accessible | current | A row in the failover trigger table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.6.1.1 | ColumnfailoverInfoCtlVportTriggerId | read-only | current | The trigger identifier of vPort. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.6.1.2 | ColumnfailoverInfoCtlVportPortId | read-only | current | The Port identifier of vPort. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.6.1.3 | ColumnfailoverInfoCtlVportId | read-only | current | The Index identifier of vPort. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.6.1.4 | ColumnfailoverInfoCtlVportStatus | read-only | current | The vPort Status. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.14.6.1.5 | ColumnfailoverInfoCtlVportPortAlias | read-only | current | The Port alias of vPort. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.17 | NodeecpInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.2.3.17.1 | TableecpChnlInfoTable | not-accessible | current | The table of ECP channel Info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1 | RowecpChnlInfoEntry | not-accessible | current | Information about ECP channel. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.1 | ColumnecpChnlInfoEntryIndex | read-only | current | The index of the ecp chnl info table. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.2 | ColumnecpChnlPortIndex | read-only | current | The ecp channel port info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.3 | ColumnecpChnlStag | read-only | current | The ecp channel stag info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.4 | ColumnecpChnlSndlen | read-only | current | The ecp channel send length info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.5 | ColumnecpChnlSndnxt | read-only | current | The ecp channel send next info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.6 | ColumnecpChnlRcvlast | read-only | current | The ecp channel recv last sequence info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.7 | ColumnecpChnlStateMachine | read-only | current | The ecp channel state machineinfo. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.8 | ColumnecpChnlRxCnt | read-only | current | The ecp channel Rx count info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.9 | ColumnecpChnlTxCnt | read-only | current | The ecp channel Tx count info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.10 | ColumnecpChnlRxDrop | read-only | current | The ecp channel RxDrop info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.11 | ColumnecpChnlTxDrop | read-only | current | The ecp channel TxDrop info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.12 | ColumnecpChnlState | read-only | current | The ecp channel state info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.13 | ColumnecpChnlAckErr | read-only | current | The ecp channel ACK error info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.17.1.1.14 | ColumnecpChnlPortAlias | read-only | current | The ecp channel port alias info. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.18 | NodeslpInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.1 | NodeslpInfoSystem | |||
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.1.1 | ScalarslpInfoProtocolVersion | read-only | current | SLP protocol version. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.1.2 | ScalarslpInfoListeningPort | read-only | current | SLP listening port. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.1.3 | TableslpInfoListeningIPInterfaceTable | not-accessible | current | A table with all the SLP listening IP interfaces. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.1.3.1 | RowslpInfoListeningIPInterfaceEntry | not-accessible | current | The configuration objects for a SLP listening IP interface. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.1.3.1.1 | ColumnlisteningIPInterfaceId | read-only | current | The identifier of this IP interface. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.1.3.1.2 | ColumnlisteningIPInterfaceAddress | read-only | current | The adddress of this IP interface. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.2 | NodeslpInfoDirectoryAgents | |||
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.2.1 | TableslpInfoDirectoryAgentsTable | not-accessible | current | A table with all the SLP Directory Agents. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.2.1.1 | RowslpInfoDirectoryAgentEntry | not-accessible | current | The configuration objects for a Directory Agent entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.2.1.1.1 | ColumndirectoryAgentAddress | read-only | current | The IP adddress of this Directory Agent. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.2.1.1.2 | ColumndirectoryAgentPort | read-only | current | The port of this Directory Agent. Communication can be done using TCP or UDP. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.2.1.1.3 | ColumndirectoryAgentTime | read-only | current | The time elapsed from the moment when this Directory Agent was learned measured in seconds. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.3 | NodeslpInfoUserAgents | |||
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.3.1 | TableslpInfoUserAgentsTable | not-accessible | current | A table with all the SLP User Agents. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.3.1.1 | RowslpInfoUserAgentEntry | not-accessible | current | The configuration objects for a User Agent entry. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.3.1.1.1 | ColumnuserAgentAddress | read-only | current | The IP adddress of this User Agent. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.3.1.1.2 | ColumnuserAgentPort | read-only | current | The port of this User Agent. Communication can be done using TCP or UDP. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.3.1.1.3 | ColumnuserAgentTime | read-only | current | The time elapsed from the moment when this User Agent was learned measured in seconds. |
| 1.3.6.1.4.1.20301.2.7.21.2.3.18.4 | ScalarslpDirectoryAgentsClear | read-write | current | Setting this object to 'clear' will reset all directory agents settings of SLP. A get action of this object will always return 'other'. Setting this object to … |
| 1.3.6.1.4.1.20301.2.7.21.3 | Nodelayer3 | |||
| 1.3.6.1.4.1.20301.2.7.21.3.1 | Nodelayer3Configs | |||
| 1.3.6.1.4.1.20301.2.7.21.3.1.1 | NodeipInterfaceCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.1 | ScalaripCfgDataIntfTableMax | read-only | current | The maximum number of rows in the data IPv4/IPv6 interface configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.2 | TableipCurCfgDataIntfTable | not-accessible | current | The table of data IPv4/IPv6 interface in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1 | RowipCurCfgDataIntfEntry | not-accessible | current | A row in the data IPv4/IPv6 interface configuration table |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1.1 | ColumnipCurCfgDataIntfIndex | read-only | current | The interface number for which the data IPv4/IPv6 interface information is related. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1.2 | ColumnipCurCfgDataIntfAddr | read-only | current | The data IPv4/IPv6 address of the interface |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1.3 | ColumnipCurCfgDataIntfMask | read-only | current | The subnet mask as IPv4 dotted-quads OR the IPv6 prefix length (integer in range 0..128) associated with this IP address . |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1.4 | ColumnipCurCfgDataIntfBroadcast | read-only | obsolete | The broadcast address of the data IP interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1.5 | ColumnipCurCfgDataIntfVlan | read-only | current | The VLAN associated with the data IPv4/IPv6 interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.2.1.6 | ColumnipCurCfgDataIntfState | read-only | current | The state of the data IPv4/IPv6 interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.3 | TableipNewCfgDataIntfTable | not-accessible | current | The table of data IPv4/IPv6 interface in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1 | RowipNewCfgDataIntfEntry | not-accessible | current | A row in the data IPv4/IPv6 interface table |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1.1 | ColumnipNewCfgDataIntfIndex | read-only | current | The interface number for which the data IPv4/IPv6 information is related. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1.2 | ColumnipNewCfgDataIntfAddr | read-create | current | This field configures the new data IPv4/IPv6 addr of the interface. Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal colon notation. Valid IPv6 … |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1.3 | ColumnipNewCfgDataIntfMask | read-create | current | The subnet mask as IPv4 dotted-quads OR the IPv6 prefix length (integer in range 0..128) associated with this IP address . |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1.4 | ColumnipNewCfgDataIntfVlan | read-create | current | The VLAN associated with the data IPv4/IPv6 interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1.5 | ColumnipNewCfgDataIntfState | read-create | current | The state of the data IPv4/IPv6 interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.3.1.6 | ColumnipNewCfgDataIntfDelete | read-create | current | When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe… |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.4 | Scalarip4CfgMgmtIntfTableMax | read-only | current | The maximum number of rows in the fabric units management IPv4 interface configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.5 | Tableip4CurCfgMgmtIntfTable | not-accessible | current | The table of fabric units management IPv4 interface in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.5.1 | Rowip4CurCfgMgmtIntfEntry | not-accessible | current | A row in the fabric unit management IPv4 interface configuration table |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.5.1.1 | Columnip4CurCfgMgmtIntfMac | read-only | current | MAC address of the unit. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.5.1.2 | Columnip4CurCfgMgmtIntfAddr | read-only | current | The management IPv4 address of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.5.1.3 | Columnip4CurCfgMgmtIntfMask | read-only | current | The managemnt IPv4 subnet mask of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.5.1.4 | Columnip4CurCfgMgmtIntfDHCPState | read-only | current | The management IPv4 DHCP state of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.5.1.5 | Columnip4CurCfgMgmtIntfState | read-only | current | The management IPv4 interface state. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.6 | Tableip4NewCfgMgmtIntfTable | not-accessible | current | The table of fabric units management IPv4 interface in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1 | Rowip4NewCfgMgmtIntfEntry | not-accessible | current | A row in the fabric unit management IPv4 interface configuration table |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1.1 | Columnip4NewCfgMgmtIntfMac | read-only | current | MAC address of the unit. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1.2 | Columnip4NewCfgMgmtIntfAddr | read-write | current | The management IPv4 address of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1.3 | Columnip4NewCfgMgmtIntfMask | read-write | current | The management IPv4 subnet mask of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1.4 | Columnip4NewCfgMgmtIntfState | read-write | current | The state of the management IPv4 interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1.5 | Columnip4NewCfgMgmtIntfDHCPState | read-write | current | The DHCP state of the management IPv4 interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.6.1.6 | Columnip4NewCfgMgmtIntfDelete | read-write | current | When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe… |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.7 | Scalarip6CfgMgmtIntfTableMax | read-only | current | The maximum number of rows in the fabric units management IPv6 interface configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.8 | Tableip6CurCfgMgmtIntfTable | not-accessible | current | The table of fabric units management IPv6 interface in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.8.1 | Rowip6CurCfgMgmtIntfEntry | not-accessible | current | A row in the fabric unit management IPv6 interface configuration table |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.8.1.1 | Columnip6CurCfgMgmtIntfMac | read-only | current | MAC address of the unit. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.8.1.2 | Columnip6CurCfgMgmtIntfAddr | read-only | current | The management IPv6 address of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.8.1.3 | Columnip6CurCfgMgmtIntfMask | read-only | current | The managemnt IPv6 prefix length of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.8.1.4 | Columnip6CurCfgMgmtIntfState | read-only | current | The state of the management IPv6 interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.9 | Tableip6NewCfgMgmtIntfTable | not-accessible | current | The table of fabric units management IPv6 interface in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.9.1 | Rowip6NewCfgMgmtIntfEntry | not-accessible | current | A row in the fabric unit management IPv6 interface configuration table |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.9.1.1 | Columnip6NewCfgMgmtIntfMac | read-only | current | MAC address of the unit. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.9.1.2 | Columnip6NewCfgMgmtIntfAddr | read-write | current | This field configures the new management IPv6 addr of the interface. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:x… |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.9.1.3 | Columnip6NewCfgMgmtIntfMask | read-write | current | The management IPv6 prefix length of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.9.1.4 | Columnip6NewCfgMgmtIntfState | read-write | current | The state of the management IPv6 interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.9.1.5 | Columnip6NewCfgMgmtIntfDelete | read-write | current | When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe… |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.10 | NodefloatingIpCfgMgmt | |||
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.10.1 | Scalarip4CurCfgMgmtIntfFloatingAddr | read-only | current | The floating management IPv4 IPv4 address. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.10.2 | Scalarip4CurCfgMgmtIntfFloatingMask | read-only | current | The floating management IPv4 subnet mask. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.10.3 | Scalarip4NewCfgMgmtIntfFloatingAddr | read-write | current | The floating management IPv4 address. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.10.4 | Scalarip4NewCfgMgmtIntfFloatingMask | read-write | current | The floating management IPv4 subnet mask. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.10.5 | Scalarip6CurCfgMgmtIntfFloatingAddr | read-only | current | The floating management IPv6 address. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.10.6 | Scalarip6CurCfgMgmtIntfFloatingMask | read-only | current | The floating management IPv6 prefix length. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.10.7 | Scalarip6NewCfgMgmtIntfFloatingAddr | read-write | current | The floating management IPv6 address |
| 1.3.6.1.4.1.20301.2.7.21.3.1.1.10.8 | Scalarip6NewCfgMgmtIntfFloatingMask | read-write | current | The floating management IPv6 prefix length. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2 | NodeipGatewayCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.1 | Scalarip4CfgDataGwTableMax | read-only | current | The maximum number of rows in the data IPv4 default gateway configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.2 | Tableip4CurCfgDataGwTable | not-accessible | current | The table of data IPv4 gateways in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1 | Rowip4CurCfgDataGwEntry | not-accessible | current | A row in the data IPv4 default gateway table |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1.1 | Columnip4CurCfgDataGwIndex | read-only | current | The default gateway number for which the data IPv4 default gateway information is related. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1.2 | Columnip4CurCfgDataGwAddr | read-only | current | The data IPv4 address of the default gateway. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1.3 | Columnip4CurCfgDataGwInterval | read-only | current | The interval between ping attempts. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1.4 | Columnip4CurCfgDataGwRetry | read-only | current | The number of failed attempts to declare the default gateway DOWN. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1.5 | Columnip4CurCfgDataGwState | read-only | current | The state of the data IPv4 default gateway. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.2.1.6 | Columnip4CurCfgDataGwArp | read-only | current | The state of ARP only health checks. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.3 | Tableip4NewCfgDataGwTable | not-accessible | current | The table of data IPv4 default gateway in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1 | Rowip4NewCfgDataGwEntry | not-accessible | current | A row in the data IPv4 default gateway configuration table |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.1 | Columnip4NewCfgDataGwIndex | read-only | current | The default gateway number for which the data IPv4 default gateway information is related. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.2 | Columnip4NewCfgDataGwAddr | read-create | current | The data IPv4 address of the default gateway. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.3 | Columnip4NewCfgDataGwInterval | read-create | current | The interval in seconds between ping attempts. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.4 | Columnip4NewCfgDataGwRetry | read-create | current | The number of failed attempts to declare the default gateway DOWN. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.5 | Columnip4NewCfgDataGwState | read-create | current | The state of the data IPv4 default gateway. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.6 | Columnip4NewCfgDataGwDelete | read-create | current | When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect … |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.3.1.7 | Columnip4NewCfgDataGwArp | read-create | current | The state of the ARP only health checks. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.4 | Scalarip6CfgDataGwTableMax | read-only | current | The maximum number of rows in the data IPv6 default gateway configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.5 | Tableip6CurCfgDataGwTable | not-accessible | current | The table of data IPv6 gateways in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.5.1 | Rowip6CurCfgDataGwEntry | not-accessible | current | A row in the data IPv6 default gateway table |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.5.1.1 | Columnip6CurCfgDataGwIndex | read-only | current | The default gateway number for which the data IPv6 default gateway information is related. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.5.1.2 | Columnip6CurCfgDataGwAddr | read-only | current | The data IPv6 address of the default gateway. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.5.1.3 | Columnip6CurCfgDataGwState | read-only | current | The state of the data IPv6 default gateway. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.6 | Tableip6NewCfgDataGwTable | not-accessible | current | The table of data IPv6 default gateway in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.6.1 | Rowip6NewCfgDataGwEntry | not-accessible | current | A row in the data IPv6 default gateway configuration table |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.6.1.1 | Columnip6NewCfgDataGwIndex | read-only | current | The default gateway number for which the data IPv6 default gateway information is related. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.6.1.2 | Columnip6NewCfgDataGwAddr | read-create | current | This field configures the new data IPv6 addr of the default gateway. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:x… |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.6.1.3 | Columnip6NewCfgDataGwState | read-create | current | The state of the data IPv6 default gateway. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.6.1.4 | Columnip6NewCfgDataGwDelete | read-create | current | When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect … |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.7 | Scalarip4CfgMgmtGwTableMax | read-only | current | The maximum number of rows in the fabric units management IPv4 default gateway configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.8 | Tableip4CurCfgMgmtGwTable | not-accessible | current | The table of fabric units management IPv4 default gateway in current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.8.1 | Rowip4CurCfgMgmtGwEntry | not-accessible | current | A row in the fabric unit management IPv4 default gateway configuration table |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.8.1.1 | Columnip4CurCfgMgmtGwMac | read-only | current | MAC address of the unit. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.8.1.2 | Columnip4CurCfgMgmtGwAddr | read-only | current | The management IPv4 address of the default gateway. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.8.1.3 | Columnip4CurCfgMgmtGwInterval | read-only | current | The interval between ping attempts. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.8.1.4 | Columnip4CurCfgMgmtGwRetry | read-only | current | The number of failed attempts to declare the gateway DOWN. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.8.1.5 | Columnip4CurCfgMgmtGwState | read-only | current | The state of the management IPv4 default gateway. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.9 | Tableip4NewCfgMgmtGwTable | not-accessible | current | The table of fabric units management IPv4 default gateway in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1 | Rowip4NewCfgMgmtGwEntry | not-accessible | current | A row in the fabric unit management IPv4 default gateway configuration table |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1.1 | Columnip4NewCfgMgmtGwMac | read-only | current | MAC address of the unit. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1.2 | Columnip4NewCfgMgmtGwAddr | read-write | current | The management IPv4 address of the default gateway. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1.3 | Columnip4NewCfgMgmtGwInterval | read-write | current | The interval between ping attempts. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1.4 | Columnip4NewCfgMgmtGwRetry | read-write | current | The number of failed attempts to declare the gateway DOWN. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1.5 | Columnip4NewCfgMgmtGwState | read-write | current | The state of the management IPv4 default gateway. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.9.1.6 | Columnip4NewCfgMgmtGwDelete | read-write | current | When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect … |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.10 | Scalarip6CfgMgmtGwTableMax | read-only | current | The maximum number of rows in the fabric units management IPv6 default gateway configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.11 | Tableip6CurCfgMgmtGwTable | not-accessible | current | The table of fabric units management IPv6 default gateway in current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.11.1 | Rowip6CurCfgMgmtGwEntry | not-accessible | current | A row in the fabric unit management IPv6 default gateway configuration table |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.11.1.1 | Columnip6CurCfgMgmtGwMac | read-only | current | MAC address of the unit. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.11.1.2 | Columnip6CurCfgMgmtGwAddr | read-only | current | The management IPv6 address of the default gateway. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.11.1.3 | Columnip6CurCfgMgmtGwState | read-only | current | The state of the management IPv6 default gateway. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.12 | Tableip6NewCfgMgmtGwTable | not-accessible | current | The table of fabric units management IPv6 default gateway in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.12.1 | Rowip6NewCfgMgmtGwEntry | not-accessible | current | A row in the fabric unit management IPv6 default gateway configuration table |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.12.1.1 | Columnip6NewCfgMgmtGwMac | read-only | current | MAC address of the unit. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.12.1.2 | Columnip6NewCfgMgmtGwAddr | read-write | current | The management IPv6 address of the default gateway. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.12.1.3 | Columnip6NewCfgMgmtGwState | read-write | current | The state of the management IPv6 default gateway. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.2.12.1.4 | Columnip6NewCfgMgmtGwDelete | read-write | current | When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect … |
| 1.3.6.1.4.1.20301.2.7.21.3.1.9 | NodednsCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.3.1.9.1 | ScalardnsCurCfgPrimaryIpAddr | read-only | current | The DNS primary IP address in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.9.2 | ScalardnsNewCfgPrimaryIpAddr | read-write | current | The DNS primary IP address in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.9.3 | ScalardnsCurCfgSecondaryIpAddr | read-only | current | The DNS primary IP address in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.9.4 | ScalardnsNewCfgSecondaryIpAddr | read-write | current | The DNS primary IP address in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.9.5 | ScalardnsCurCfgDomainName | read-only | current | The DNS doamin name in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.9.6 | ScalardnsNewCfgDomainName | read-write | current | The DNS doamin name in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.9.9 | ScalardnsNewCfgFirstRequestAddr | read-write | current | Type of the first request to dns |
| 1.3.6.1.4.1.20301.2.7.21.3.1.9.10 | ScalardnsCurCfgFirstRequestAddr | read-only | current | Type of the first request to dns |
| 1.3.6.1.4.1.20301.2.7.21.3.1.9.11 | ScalardnsCurCfgPriServerPort | read-only | current | Choose the port that the primary server is connected to. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.9.12 | ScalardnsNewCfgPriServerPort | read-write | current | Choose the port that the primary server is connected to. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.9.13 | ScalardnsCurCfgSecServerPort | read-only | current | Choose the port that the secondary server is connected to. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.9.14 | ScalardnsNewCfgSecServerPort | read-write | current | Choose the port that the secondary server is connected to. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19 | NodeigmpCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.1 | ScalarigmpCurCfgOnOff | read-only | current | Globally turn IGMP On/Off. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.2 | ScalarigmpNewCfgOnOff | read-write | current | Globally turn IGMP On/Off. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.9 | NodeigmpSnoopCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.9.7 | ScalarigmpSnoopCurCfgMrto | read-only | current | The value of multicast router timeout in the current config. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.9.8 | ScalarigmpSnoopNewCfgMrto | read-write | current | The value of multicast router timeout in the new config. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.9.9 | ScalarigmpSnoopCurCfgAggrEnaDis | read-only | current | Enable/Disable of IGMP Report aggregation. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.9.10 | ScalarigmpSnoopNewCfgAggrEnaDis | read-write | current | Enable/Disable of IGMP Report aggregation. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.9.11 | ScalarigmpSnoopCurCfgEnaDis | read-only | current | The current status of IGMP Snooping. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.9.12 | ScalarigmpSnoopNewCfgEnaDis | read-write | current | Set Enable/Disable of IGMP Snooping. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.9.13 | ScalarigmpSnoopNewCfgVlanAdd | read-write | current | The VLAN to be added to snooping vlan list. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.9.14 | ScalarigmpSnoopNewCfgVlanRem | read-write | current | The VLAN to be removed from snooping vlan list. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.9.15 | ScalarigmpSnoopNewCfgVlanClear | read-write | current | Removing ALL Snooping Vlans. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.9.16 | ScalarigmpSnoopCurCfgVlanBmap | read-only | current | The snooping vlans present in the vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxx… |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.9.17 | ScalarigmpSnoopNewCfgVlanBmap | read-write | current | The snooping vlans present in the vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxx… |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.9.26 | ScalarigmpSnoopCurCfgSrcIp | read-only | current | The source ip for GSQ proxy in current config. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.9.27 | ScalarigmpSnoopNewCfgSrcIp | read-write | current | The source ip for GSQ proxy in new config. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.9.33 | ScalarigmpSnoopSetToDefault | read-write | current | When setting the value setDefault(2), the IGMP Snooping configuration is set to the default values. When reading, none(1) is always returned. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.10 | NodeigmpStaticMrtrCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1 | TableigmpStaticMrtrCurCfgTable | not-accessible | current | The IGMP Static Multicast Router table in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1.1 | RowigmpStaticMrtrCurCfgTableEntry | not-accessible | current | A row in the Static Multicast Router table. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1.1.1 | ColumnigmpStaticMrtrCurCfgIndx | read-only | current | The IGMP Multicast Router table port index. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1.1.2 | ColumnigmpStaticMrtrCurCfgPortId | read-only | current | The IGMP Multicast Router port in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1.1.3 | ColumnigmpStaticMrtrCurCfgVlanId | read-only | current | The IGMP Multicast Router port in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1.1.4 | ColumnigmpStaticMrtrCurCfgVersion | read-only | current | The IGMP version of the IGMP Static Multicast Router. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.10.1.1.5 | ColumnigmpStaticMrtrCurCfgPortAlias | read-only | current | The IGMP Multicast Router port alias in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2 | TableigmpStaticMrtrNewCfgTable | not-accessible | current | The IGMP Static Multicast Router table in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1 | RowigmpStaticMrtrNewCfgTableEntry | not-accessible | current | A row in the Static Multicast Router table. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1.1 | ColumnigmpStaticMrtrNewCfgIndx | read-only | current | The IGMP Multicast Router table port index. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1.2 | ColumnigmpStaticMrtrNewCfgPortId | read-write | current | The IGMP Multicast Router port in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1.3 | ColumnigmpStaticMrtrNewCfgVlanId | read-write | current | The IGMP Multicast Router port in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1.4 | ColumnigmpStaticMrtrNewCfgVersion | read-write | current | The IGMP version of the IGMP Static Multicast Router. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1.5 | ColumnigmpStaticMrtrNewCfgDelete | read-write | current | When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe… |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.10.2.1.6 | ColumnigmpStaticMrtrNewCfgPortAlias | read-write | current | The IGMP Multicast Router port alias in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.10.3 | ScalarigmpStaticMrtrNewCfgClear | read-write | current | When set to the value of 2 (clear), the entire table is deleted. When read, other(1) is returned. Setting the value to anything other than 2(clear) has no effe… |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11 | NodeigmpFilterCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1 | TableigmpFltCurCfgTable | not-accessible | current | The IGMP filtering table in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1.1 | RowigmpFltCurCfgTableEntry | not-accessible | current | A row in the filtering table. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1.1.1 | ColumnigmpFltCurCfgIndx | read-only | current | The IGMP filter table index. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1.1.2 | ColumnigmpFltCurCfgMcastIp1 | read-only | current | Range1 Multicast IP address to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1.1.3 | ColumnigmpFltCurCfgMcastIp2 | read-only | current | Range2 Multicast IP address to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1.1.4 | ColumnigmpFltCurCfgAction | read-only | current | The action for the IGMP filtering rule. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.1.1.5 | ColumnigmpFltCurCfgState | read-only | current | The state of this IGMP filtering rule. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2 | TableigmpFltNewCfgTable | not-accessible | current | The IGMP filtering table in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1 | RowigmpFltNewCfgTableEntry | not-accessible | current | A row in the filtering table. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1.1 | ColumnigmpFltNewCfgIndx | read-only | current | The IGMP filter table index. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1.2 | ColumnigmpFltNewCfgMcastIp1 | read-write | current | Range1 Multicast source IP address to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1.3 | ColumnigmpFltNewCfgMcastIp2 | read-write | current | Range2 Multicast source IP address to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1.4 | ColumnigmpFltNewCfgAction | read-write | current | The action for the IGMP filtering rule. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1.5 | ColumnigmpFltNewCfgState | read-write | current | The state of this IGMP filtering rule. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.2.1.6 | ColumnigmpFltNewCfgDelete | read-write | current | When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe… |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.3 | TableigmpFltCurCfgPortTable | not-accessible | current | The IGMP filtering port table in the current configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.3.1 | RowigmpFltCurCfgPortTableEntry | not-accessible | current | A row in the IGMP filtering port table. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.3.1.1 | ColumnigmpFltCurCfgPortIndx | read-only | current | The port index. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.3.1.2 | ColumnigmpFltCurCfgPortState | read-only | current | Enable or disable IGMP filtering. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.3.1.3 | ColumnigmpFltCurCfgPortFiltBmap | read-only | current | The IGMP filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .… |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.3.1.4 | ColumnigmpFltCurCfgPortAlias | read-only | current | The port alias. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4 | TableigmpFltNewCfgPortTable | not-accessible | current | The IGMP filtering port table in the new configuration block. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1 | RowigmpFltNewCfgPortTableEntry | not-accessible | current | A row in the IGMP filtering port table. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1.1 | ColumnigmpFltNewCfgPortIndx | read-only | current | The port index. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1.2 | ColumnigmpFltNewCfgPortState | read-write | current | Enable or disable IGMP filtering. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1.3 | ColumnigmpFltNewCfgPortFiltBmap | read-only | current | The IGMP filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .… |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1.4 | ColumnigmpFltNewCfgPortAddFiltRule | read-write | current | This is an action object to add filtering rule to a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to b… |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1.5 | ColumnigmpFltNewCfgPortRemFiltRule | read-write | current | This is an action object to remove filtering rule from a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule… |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.4.1.6 | ColumnigmpFltNewCfgPortAlias | read-only | current | The port alias. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.5 | ScalarigmpFltCurCfgEnaDis | read-only | current | Enable/Disable of IGMP Filtering. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.11.6 | ScalarigmpFltNewCfgEnaDis | read-write | current | Enable/Disable of IGMP Filtering. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.13 | NodeigmpAdvCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.13.1 | ScalarigmpAdvCurCfgQInterval | read-only | current | The IGMP Query Interval of current config. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.13.2 | ScalarigmpAdvNewCfgQInterval | read-write | current | The IGMP Query Interval of new config. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.13.3 | ScalarigmpAdvCurCfgRobust | read-only | current | The value of expected packet loss on subnet in current config. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.13.4 | ScalarigmpAdvNewCfgRobust | read-write | current | Set the value of expected packet loss on subnet. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.13.5 | ScalarigmpAdvCurCfgTimeout | read-only | current | The IGMP Report timeout. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.13.6 | ScalarigmpAdvNewCfgTimeout | read-write | current | Set IGMP Report timeout. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.13.7 | ScalarigmpAdvNewCfgVlanFastlvAdd | read-write | current | The VLAN to be added to quick-leave vlan list. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.13.8 | ScalarigmpAdvNewCfgVlanFastlvRem | read-write | current | The VLAN to be removed from quick-leave vlan list. When read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.13.9 | ScalarigmpAdvCurCfgVlanFastlvBmap | read-only | current | The fast-leave enabled vlans present in the vlan map list. The fast-leave enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 .… |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.13.10 | ScalarigmpAdvNewCfgVlanFastlvBmap | read-write | current | The fast-leave enabled vlans present in the vlan map list. The fast-leave enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 .… |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.13.15 | ScalarigmpAdvCurCfgRtrAlert | read-only | current | Enable/disable sending IGMP messages with Router Alert option. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.13.16 | ScalarigmpAdvNewCfgRtrAlert | read-write | current | Enable/disable sending IGMP messages with Router Alert option. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.14 | NodeigmpV3SnoopCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.14.1 | ScalarigmpV3SnoopCurCfgSources | read-only | current | Number of sources to snoop in a group record in current config. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.14.2 | ScalarigmpV3SnoopNewCfgSources | read-write | current | Number of sources to snoop in a group record in new config. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.14.3 | ScalarigmpV3SnoopCurCfgEnaDis | read-only | current | The current status of IGMP V3 Snooping. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.14.4 | ScalarigmpV3SnoopNewCfgEnaDis | read-write | current | Set Enable/Disable of IGMP V3 Snooping. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.14.5 | ScalarigmpV3SnoopCurCfgExcludeEnaDis | read-only | current | The current status of IGMP V3 EXCLUDE filter-mode Snooping. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.14.6 | ScalarigmpV3SnoopNewCfgExcludeEnaDis | read-write | current | Set Enable/Disable of IGMP V3 EXCLUDE filter-mode Snooping. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.14.7 | ScalarigmpV3SnoopCurCfgV1V2EnaDis | read-only | current | The current status of IGMP V1/V2 Report Snooping. |
| 1.3.6.1.4.1.20301.2.7.21.3.1.19.14.8 | ScalarigmpV3SnoopNewCfgV1V2EnaDis | read-write | current | Set Enable/Disable of IGMP V1/V2 Report Snooping. |
| 1.3.6.1.4.1.20301.2.7.21.3.2 | Nodelayer3Stats | |||
| 1.3.6.1.4.1.20301.2.7.21.3.2.4 | NodednsStats | |||
| 1.3.6.1.4.1.20301.2.7.21.3.2.4.1 | ScalardnsStatInGoodDnsRequests | read-only | current | The total number of DNS request packets which are received. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.4.2 | ScalardnsStatInBadDnsRequests | read-only | current | The total number of DNS request packets received that were dropped. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.4.3 | ScalardnsStatOutDnsRequests | read-only | current | The total number of DNS request packets that have been transmitted. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.7 | NodeclearStats | |||
| 1.3.6.1.4.1.20301.2.7.21.3.2.7.1 | ScalaripClearStats | read-write | current | Setting this to clear(2) results in clearing the IP statistics. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.7.5 | ScalartcpClearStats | read-write | current | Setting this to clear(1) results in clearing the TCP statistics. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.7.6 | ScalarudpClearStats | read-write | current | Setting this to clear(1) results in clearing the UDP statistics. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.7.7 | ScalardnsClearStats | read-write | current | Setting this to clear(1) results in clearing the DNS statistics. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.7.8 | ScalararpClearStats | read-write | current | Setting this to clear(1) results in clearing the ARP statistics. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.7.9 | ScalaricmpClearStats | read-write | current | Setting this to clear(1) results in clearing the ICMP statistics. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.7.13 | Scalaripv6ClearStats | read-write | current | Setting this to clear(1) results in clearing the IPv6 statistics. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.7.14 | Scalaripv6ClearIcmpStats | read-write | current | Setting this to clear(1) results in clearing the ICMP6 statistics. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.7.15 | Scalaripv6ClearUdpStats | read-write | current | Setting this to clear(1) results in clearing the UDP6 statistics. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.7.17 | ScalarripClearStats | read-write | current | Setting this to clear(1) results in clearing the RIP statistics. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.7.18 | Scalaripv6NbrClearStats | read-write | current | Setting this to clear(1) results in clearing the IPv6 nbr statistics. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9 | NodeigmpStats | |||
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1 | TableigmpSnoopStats | not-accessible | current | Statistics for IGMP Snooping. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1 | RowigmpSnoopStatsEntry | not-accessible | current | Statistics for IGMP Snooping. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.1 | ColumnigmpSnoopVlanIndex | read-only | current | The index of the VLAN for which these statistics apply. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.2 | ColumnrxIgmpValidPkts | read-only | current | The total number of valid IGMP packets received on this VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.3 | ColumnrxIgmpInvalidPkts | read-only | current | The total number of invalid IGMP packets received on this VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.4 | ColumnrxIgmpGenQueries | read-only | current | The total number of IGMP General Query packets received on this VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.5 | ColumnrxIgmpGrpSpecificQueries | read-only | current | The total number of IGMP Group Specific Query packets received on this VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.6 | ColumnrxIgmpLeaves | read-only | current | The total number of IGMP Leave packets received on this VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.7 | ColumnrxIgmpReports | read-only | current | The total number of IGMP Report packets received on this VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.8 | ColumntxIgmpGrpSpecificQueries | read-only | current | The total number of IGMP Group Specific Query packets transmitted on this VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.9 | ColumntxIgmpReports | read-only | current | The total number of IGMP Report packets transmitted on this VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.10 | ColumntxIgmpLeaves | read-only | current | The total number of IGMP Leave packets transmitted on this VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.11 | ColumnrxIgmpGroupSourceSpecificQueries | read-only | current | The total number of IGMP Group Source Specific (GSSQ) Queries received on this VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.12 | ColumnrxIgmpV3CurrentStateRecords | read-only | current | The total number of IGMP Current State Records (CSRs) received on this VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.13 | ColumnrxIgmpV3SourceListChangeRecords | read-only | current | The total number of IGMP Source List Change Records (SLCRs) received on this VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.14 | ColumnrxIgmpV3FilterChangeRecords | read-only | current | The total number of IGMP Filter Mode Change Records (FMCRs) received on this VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.16 | ColumntxIgmpGenQueries | read-only | current | The total number of IGMP General Query packets send on this VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.17 | ColumnrxIgmpDiscardPkts | read-only | current | The total number of IGMP packets discarded on this VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.18 | ColumnrxIgmpPimHellos | read-only | current | The total number of Pim Hello packets received on this VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.1.1.19 | ColumnigmpClearVlanStats | read-write | current | Setting this to clear(1) results in clearing the statistics for this snooping VLAN. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.2 | ScalarigmpClearAllStats | read-write | current | Setting this to clear(1) results in clearing the IGMP statistics. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.3 | ScalarigmpStatsTotalIgmpGroups | read-only | current | The total number of IGMP groups. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.9.4 | ScalarigmpStatsTotalIpmcGroups | read-only | current | The total number of IPMC groups. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10 | Nodeipv6Stats | |||
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.1 | Scalaripv6InReceives | read-only | current | The total number of input datagrams received from interfaces, including those received in error. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.2 | Scalaripv6InMcasts | read-only | current | The total number of multicast packets received from interfaces, including those received in error. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.3 | Scalaripv6InDelivers | read-only | current | Total datagrams given to upper layer - ICMP/UDP |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.4 | Scalaripv6InDiscards | read-only | current | Total datagrams discarded despite no errors |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.5 | Scalaripv6InHdrerrs | read-only | current | Total datagrams with error in IPv6/Option headers |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.6 | Scalaripv6InAddrerrs | read-only | current | Total datagrams with error in destination address |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.7 | Scalaripv6InUnkprots | read-only | current | Total datagrams with unknown/unsupported protocol |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.8 | Scalaripv6InTruncs | read-only | current | Total datagrams with insufficient data |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.10 | Scalaripv6OutMcasts | read-only | current | Total sent multicast pkts |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.11 | Scalaripv6ForwDgrams | read-only | current | Total datagrams attempted to be forwarded |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.12 | Scalaripv6TooBigerrs | read-only | current | Total datagrams which could not be forwarded as their size exceeds (Path) MTU |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.13 | Scalaripv6OutReqs | read-only | current | Total datagrams attempted to be sent |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.14 | Scalaripv6OutDiscards | read-only | current | Total outgoing Datagrams discarded despite no errors |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.15 | Scalaripv6OutNorts | read-only | current | Total datagrams discarded due to no routes |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.16 | Scalaripv6Reasmreqs | read-only | current | Total datagrams needing reassembly |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.17 | Scalaripv6Reasmoks | read-only | current | Total datagrams successfully reassembled |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.18 | Scalaripv6Reasmfails | read-only | current | Total datagrams for witch reassembly failured |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.19 | Scalaripv6Fragoks | read-only | current | Total datagrams successfully fragmented |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.20 | Scalaripv6Fragfails | read-only | current | Total datagrams for witch fragmentation failured |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.21 | Scalaripv6Fragcreates | read-only | current | Total number of fragments created |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.22 | Scalaripv6InNsols | read-only | current | Total number of received Neighbor Solicitations |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.23 | Scalaripv6InNadvs | read-only | current | Total number of received Neighbor Advertisements |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.25 | Scalaripv6InRoutsols | read-only | current | Total number of received Router Solicitations |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.26 | Scalaripv6InRoutadvs | read-only | current | Total number of received Router Advertisements |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.27 | Scalaripv6InRoutRedirs | read-only | current | Total number of received Router Redirect messages |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.28 | Scalaripv6OutNsols | read-only | current | Total number of sent Neighbor Solicitations |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.29 | Scalaripv6OutNadvs | read-only | current | Total number of sent Neighbor Advertisements |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.30 | Scalaripv6OutRoutadvs | read-only | current | Total number of sent Router Advertisements |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.31 | Scalaripv6OutRedirs | read-only | current | Total number of sent Redirects |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.32 | Scalaripv6OutRoutSols | read-only | current | Total number of sent Router Solicitations |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.39 | Scalaripv6icmpInMsgs | read-only | current | The total number of ICMP messages received. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.40 | Scalaripv6icmpInErrs | read-only | current | The total number of ICMP messages attempted to send. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.41 | Scalaripv6icmpInBadcode | read-only | current | The total number of ICMP messages in bad code. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.42 | Scalaripv6icmpInToobig | read-only | current | The number of ICMP too big messages received. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.43 | Scalaripv6icmpInDstUnreach | read-only | current | The number of ICMP Destination Unreachable messages received. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.44 | Scalaripv6icmpInTmexceeded | read-only | current | The number of ICMP Time Exceeded messages received. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.45 | Scalaripv6icmpInParamprob | read-only | current | The number of ICMP Parameter Problem messages received. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.46 | Scalaripv6icmpInEchoReq | read-only | current | The number of ICMP Echo request messages received. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.47 | Scalaripv6icmpInEchoResp | read-only | current | The number of ICMP Echo Reply messages received. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.48 | Scalaripv6icmpOutMsgs | read-only | current | The total number of ICMP messages which this entity attempted to send. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.49 | Scalaripv6icmpOutErrs | read-only | current | The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.50 | Scalaripv6icmpOutDstUnreach | read-only | current | The number of ICMP Destination Unreachable messages sent. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.51 | Scalaripv6icmpOutToobig | read-only | current | The number of ICMP too big messages sent. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.52 | Scalaripv6icmpOutTmexceeded | read-only | current | The number of ICMP Time Exceeded messages sent. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.53 | Scalaripv6icmpOutParamprob | read-only | current | The number of ICMP Parameter Problem messages sent. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.54 | Scalaripv6icmpOutEchoReq | read-only | current | The number of ICMP Echo request messages sent. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.55 | Scalaripv6icmpOutEchoResp | read-only | current | The number of ICMP Echo Reply messages sent. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.56 | Scalaripv6icmpInRouterSol | read-only | current | The number of ICMP router solicitations received. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.57 | Scalaripv6icmpInRouterAdv | read-only | current | The number of ICMP router advertisements received. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.58 | Scalaripv6icmpInNeighSol | read-only | current | The number of ICMP neighbor solicitations received. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.59 | Scalaripv6icmpInNeighAdv | read-only | current | The number of ICMP neighbor advertisements received. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.60 | Scalaripv6icmpInRedir | read-only | current | The number of ICMP Redirect messages received. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.61 | Scalaripv6icmpOutRouterSol | read-only | current | The number of ICMP router solicitations sent. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.62 | Scalaripv6icmpOutRouterAdv | read-only | current | The number of ICMP router advertisements sent. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.63 | Scalaripv6icmpOutNeighSol | read-only | current | The number of ICMP neighbor solicitations sent. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.64 | Scalaripv6icmpOutNeighAdv | read-only | current | The number of ICMP neighbor advertisements sent. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.65 | Scalaripv6icmpOutRedir | read-only | current | The number of ICMP Redirect messages sent. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.66 | Scalaripv6udpInDgrams | read-only | current | Total number of UDP received datagrams. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.67 | Scalaripv6udpInErrs | read-only | current | Total number of UDP error encountered during processing of packet. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.68 | Scalaripv6udpOutDgrams | read-only | current | Total number of UDP datagrams passed to IP6 layer. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.69 | Scalaripv6udpNumPorts | read-only | current | Total number of UDP ports that are currently open. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.70 | Scalaripv6icmpInAdminProhib | read-only | current | The total number of received Destination Unreachable ICMP packets. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.10.71 | Scalaripv6icmpOutAdminProhib | read-only | current | The total number of sent Destination Unreachable ICMP packets. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.16 | NodeipStats | |||
| 1.3.6.1.4.1.20301.2.7.21.3.2.16.1 | ScalaripStatsInReceives | read-only | current | ip InReceive |
| 1.3.6.1.4.1.20301.2.7.21.3.2.16.2 | ScalaripStatsInHdrErrors | read-only | current | ip InHdrError |
| 1.3.6.1.4.1.20301.2.7.21.3.2.16.3 | ScalaripStatsInAddrErrors | read-only | current | ip InAddrErrors |
| 1.3.6.1.4.1.20301.2.7.21.3.2.16.5 | ScalaripStatsInUnknownProtos | read-only | current | ip InUnknownProtos |
| 1.3.6.1.4.1.20301.2.7.21.3.2.16.6 | ScalaripStatsInDiscards | read-only | current | ip InDiscards |
| 1.3.6.1.4.1.20301.2.7.21.3.2.16.7 | ScalaripStatsInDelivers | read-only | current | ip InDelivers |
| 1.3.6.1.4.1.20301.2.7.21.3.2.16.8 | ScalaripStatsOutRequests | read-only | current | ip OutRequests |
| 1.3.6.1.4.1.20301.2.7.21.3.2.16.9 | ScalaripStatsOutDiscards | read-only | current | ip OutDiscards |
| 1.3.6.1.4.1.20301.2.7.21.3.2.16.19 | ScalaripStatsDefaultTTL | read-only | current | ip DefaultTTL |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17 | NodeicmpStats | |||
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.1 | ScalaricmpStatsInMsgs | read-only | current | icmp InMsgs |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.2 | ScalaricmpStatsInErrors | read-only | current | icmp InErrors |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.3 | ScalaricmpStatsInDestUnreachs | read-only | current | icmp InDestUnreachs |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.4 | ScalaricmpStatsInTimeExcds | read-only | current | icmp InTimeExcds |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.5 | ScalaricmpStatsInParmProbs | read-only | current | icmp InParmProbs |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.6 | ScalaricmpStatsInSrcQuenchs | read-only | current | icmp InSrcQuenchs |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.7 | ScalaricmpStatsInRedirects | read-only | current | icmp InRedirects |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.8 | ScalaricmpStatsInEchos | read-only | current | icmp InEchos |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.9 | ScalaricmpStatsInEchoReps | read-only | current | icmp InEchoReps |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.10 | ScalaricmpStatsInTimestamps | read-only | current | icmp InTimestamps |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.11 | ScalaricmpStatsInTimestampReps | read-only | current | icmp InTimestampReps |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.12 | ScalaricmpStatsInAddrMasks | read-only | current | icmp InAddrMasks |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.13 | ScalaricmpStatsInAddrMaskReps | read-only | current | icmp InAddrMaskReps |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.14 | ScalaricmpStatsOutMsgs | read-only | current | icmp OutMsgs |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.15 | ScalaricmpStatsOutErrors | read-only | current | icmp OutErrors |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.16 | ScalaricmpStatsOutDestUnreachs | read-only | current | icmp OutDestUnreachs |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.17 | ScalaricmpStatsOutTimeExcds | read-only | current | icmp OutTimeExcds |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.18 | ScalaricmpStatsOutParmProbs | read-only | current | icmp OutParmProbs |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.19 | ScalaricmpStatsOutSrcQuenchs | read-only | current | icmp OutSrcQuenchs |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.20 | ScalaricmpStatsOutRedirects | read-only | current | icmp OutRedirects |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.21 | ScalaricmpStatsOutEchos | read-only | current | icmp OutEchos |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.22 | ScalaricmpStatsOutEchoReps | read-only | current | icmp OutEchoReps |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.23 | ScalaricmpStatsOutTimestamps | read-only | current | icmp OutTimestamps |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.24 | ScalaricmpStatsOutTimestampReps | read-only | current | icmp OutTimestampReps |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.25 | ScalaricmpStatsOutAddrMasks | read-only | current | icmp OutAddrMasks |
| 1.3.6.1.4.1.20301.2.7.21.3.2.17.26 | ScalaricmpStatsOutAddrMaskReps | read-only | current | icmp OutAddrMaskReps |
| 1.3.6.1.4.1.20301.2.7.21.3.2.18 | NodetcpStats | |||
| 1.3.6.1.4.1.20301.2.7.21.3.2.18.1 | ScalartcpStatsRtoAlgorithm | read-only | current | tcp RtoAlgorithm |
| 1.3.6.1.4.1.20301.2.7.21.3.2.18.2 | ScalartcpStatsRtoMin | read-only | current | tcp RtoMin |
| 1.3.6.1.4.1.20301.2.7.21.3.2.18.3 | ScalartcpStatsRtoMax | read-only | current | tcp RtoMax |
| 1.3.6.1.4.1.20301.2.7.21.3.2.18.4 | ScalartcpStatsMaxConn | read-only | current | tcp MaxConn |
| 1.3.6.1.4.1.20301.2.7.21.3.2.18.5 | ScalartcpStatsActiveOpens | read-only | current | tcp ActiveOpens |
| 1.3.6.1.4.1.20301.2.7.21.3.2.18.6 | ScalartcpStatsPassiveOpens | read-only | current | tcp PassiveOpens |
| 1.3.6.1.4.1.20301.2.7.21.3.2.18.7 | ScalartcpStatsAttemptFails | read-only | current | tcp AttemptFails |
| 1.3.6.1.4.1.20301.2.7.21.3.2.18.8 | ScalartcpStatsEstabResets | read-only | current | tcp EstabResets |
| 1.3.6.1.4.1.20301.2.7.21.3.2.18.9 | ScalartcpStatsInSegs | read-only | current | tcp InSegs |
| 1.3.6.1.4.1.20301.2.7.21.3.2.18.10 | ScalartcpStatsOutSegs | read-only | current | tcp OutSegs |
| 1.3.6.1.4.1.20301.2.7.21.3.2.18.11 | ScalartcpStatsRetransSegs | read-only | current | tcp RetransSegs |
| 1.3.6.1.4.1.20301.2.7.21.3.2.18.12 | ScalartcpStatsInErrs | read-only | current | tcp InErrs |
| 1.3.6.1.4.1.20301.2.7.21.3.2.18.13 | ScalartcpStatsCurrEstab | read-only | current | tcp CurrEstab |
| 1.3.6.1.4.1.20301.2.7.21.3.2.18.14 | ScalartcpStatsCurrConn | read-only | current | tcp CurrConn |
| 1.3.6.1.4.1.20301.2.7.21.3.2.18.15 | ScalartcpStatsOutRsts | read-only | current | tcp OutRsts |
| 1.3.6.1.4.1.20301.2.7.21.3.2.19 | NodeudpStats | |||
| 1.3.6.1.4.1.20301.2.7.21.3.2.19.1 | ScalarudpStatsInDatagrams | read-only | current | udp InDatagrams |
| 1.3.6.1.4.1.20301.2.7.21.3.2.19.2 | ScalarudpStatsOutDatagrams | read-only | current | udp OutDatagrams |
| 1.3.6.1.4.1.20301.2.7.21.3.2.19.3 | ScalarudpStatsInErrors | read-only | current | udp InErrors |
| 1.3.6.1.4.1.20301.2.7.21.3.2.19.4 | ScalarudpStatsNoPorts | read-only | current | udp NoPorts |
| 1.3.6.1.4.1.20301.2.7.21.3.2.26 | NodenbrStats | |||
| 1.3.6.1.4.1.20301.2.7.21.3.2.26.1 | ScalarnbrStatEntries | read-only | current | The current number of NBR entries. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.26.2 | ScalarnbrStatHighWater | read-only | current | The highest number of NBR entries. |
| 1.3.6.1.4.1.20301.2.7.21.3.2.26.3 | ScalarnbrStatMaxEntries | read-only | current | The maximum number of NBR entries. |
| 1.3.6.1.4.1.20301.2.7.21.3.3 | Nodelayer3Info | |||
| 1.3.6.1.4.1.20301.2.7.21.3.3.5 | NodegatewayInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.1 | Tableip4DataGwInfoTable | not-accessible | current | The table of data IPv4 gateway information. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.1.1 | Rowip4DataGwInfoEntry | not-accessible | current | A row in the data IPv4 gateway information table |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.1.1.1 | Columnip4DataGwInfoIndex | read-only | current | The default gateway number for which the data IPv4 default gateway information is related. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.1.1.2 | Columnip4DataGwInfoAddr | read-only | current | The data IPv4 default gateway address. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.1.1.3 | Columnip4DataGwInfoStatus | read-only | current | The data IPv4 default gateway status. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.2 | Tableip6DataGwInfoTable | not-accessible | current | The table of data IPv6 gateway information. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.2.1 | Rowip6DataGwInfoEntry | not-accessible | current | A row in the data IPv6 gateway information table |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.2.1.1 | Columnip6DataGwInfoIndex | read-only | current | The default gateway number for which the data IPv6 default gateway information is related. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.2.1.2 | Columnip6DataGwInfoAddr | read-only | current | The data IPv6 default gateway address. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.2.1.3 | Columnip6DataGwInfoState | read-only | current | The data IPv6 default gateway state. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.3 | Tableip4MgmtGwInfoTable | not-accessible | current | The table of mgmt IPv4 gateway information. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.3.1 | Rowip4MgmtGwInfoEntry | not-accessible | current | A row in the mgmt IPv4 gateway information table |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.3.1.1 | Columnip4MgmtGwInfoMac | read-only | current | MAC address of the unit. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.3.1.2 | Columnip4MgmtGwInfoAddr | read-only | current | The mgmt IPv4 default gateway address. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.3.1.3 | Columnip4MgmtGwInfoState | read-only | current | The mgmt IPv4 default gateway state. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.4 | Tableip6MgmtGwInfoTable | not-accessible | current | The table of mgmt IPv6 gateway information. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.4.1 | Rowip6MgmtGwInfoEntry | not-accessible | current | A row in the mgmt IPv6 gateway information table |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.4.1.1 | Columnip6MgmtGwInfoMac | read-only | current | MAC address of the unit. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.4.1.2 | Columnip6MgmtGwInfoAddr | read-only | current | The mgmt IPv6 default gateway address. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.5.4.1.3 | Columnip6MgmtGwInfoState | read-only | current | The mgmt IPv6 default gateway state. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6 | NodeigmpInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.1 | TableigmpInfoTable | not-accessible | current | The table of IGMP group membership information. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1 | RowigmpInfoEntry | not-accessible | current | Information about an IGMP group member . |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.1 | ColumnigmpInfoIndex | read-only | current | The igmp group number for which the IGMP info table is related. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.2 | ColumnigmpInfoGroupId | read-only | current | The IP address of the IGMP group. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.3 | ColumnigmpInfoVlanId | read-only | current | The VLAN ID for this IGMP group. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.4 | ColumnigmpInfoSrcTrunk | read-only | current | The downstream trunk number. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.5 | ColumnigmpInfoSrcPortIndex | read-only | current | The downstream port number. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.6 | ColumnigmpInfoVersion | read-only | current | The Version of IGMP host. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.7 | ColumnigmpInfoExpires | read-only | current | The expiration time for this host. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.8 | ColumnigmpInfoMode | read-only | current | The IGMPv3 filter-mode for this host. Returned values: exclude(1) - the IGMPv3 filter-mode is exclude. include(2) - the IGMPv3 filter-mode is include. na(3) - … |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.9 | ColumnigmpInfoSourceIp | read-only | current | The source IP address of the IGMP group. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.10 | ColumnigmpInfoFwd | read-only | current | The IGMPv3 forwarding for this source/group IP for this host. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.11 | ColumnigmpInfoGrpExpires | read-only | current | The expiration time for the group. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.1.1.12 | ColumnigmpInfoSrcPortAlias | read-only | current | The downstream port alias. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.2 | TableigmpMrtrInfoTable | not-accessible | current | The table of IGMP mrouters. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1 | RowigmpMrtrInfoEntry | not-accessible | current | Information about an IGMP mrouter. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.1 | ColumnigmpMrtrInfoIndex | read-only | current | The mrouter number for which the IGMP mrouter info table is related. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.2 | ColumnigmpMrtrInfoVlanId | read-only | current | The VLAN ID on which this IGMP mrouter is attached. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.3 | ColumnigmpMrtrInfoPortId | read-only | current | The port/portchannel alias on which this IGMP mrouter is attached. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.4 | ColumnigmpMrtrInfoVersion | read-only | current | The version of this IGMP mrouter. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.5 | ColumnigmpMrtrInfoExpires | read-only | current | The expiration time for this mrouter. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.6 | ColumnigmpMrtrInfoMrt | read-only | current | The Maximum Query Response time of this IGMP mrouter. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.7 | ColumnigmpMrtrInfoQrv | read-only | current | The Querier Robustness value of this IGMP mrouter. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.8 | ColumnigmpMrtrInfoQqic | read-only | current | The Querier query interval code of this IGMP mrouter. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.10 | ColumnigmpMrtrInfoSrcIp | read-only | current | The Source IP of this IGMP mrouter. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.2.1.11 | ColumnigmpMrtrInfoPortAlias | read-only | current | The port/portchannel alias on which this IGMP mrouter is attached. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.6.3 | ScalarigmpClearTables | read-write | current | Clear the IGMP tables. When setting clearGroups(1), the dynamic groups are removed, when setting clearMrouters(2), the mrouter tables are removed and when sett… |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9 | NodeipIntfInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.1 | TableipDataIntfInfoTable | not-accessible | current | The table of data IPv4/IPv6 interface information. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1 | RowipDataIntfInfoEntry | not-accessible | current | A row in the data IPv4/IPv6 interface information table. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1.1 | ColumnipDataIntfInfoIndex | read-only | current | The interface number for which the data IPv4/IPv6 interface information is related. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1.2 | ColumnipDataIntfInfoAddr | read-only | current | The data IPv4/IPv6 address of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1.3 | ColumnipDataIntfInfoMask | read-only | current | The subnet mask as IPv4 dotted-quads OR the IPv6 prefix length (integer in range 0..128) associated with this IP address. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1.4 | ColumnipDataIntfInfoBcastAddr | read-only | current | The data IP broadcast address of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1.5 | ColumnipDataIntfInfoVlan | read-only | current | The data IPv4/IPv6 VLAN state associated with the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.1.1.6 | ColumnipDataIntfInfoStatus | read-only | current | The data IPv4/IPv6 interface state. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.2 | Tableip4MgmtIntfInfoTable | not-accessible | current | The table of fabric unit management IPv4 interface information. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.2.1 | Rowip4MgmtIntfInfoEntry | not-accessible | current | A row in the fabric unit management IPv4 interface information table. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.2.1.1 | Columnip4MgmtIntfInfoMac | read-only | current | MAC address of the unit. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.2.1.2 | Columnip4MgmtIntfInfoAddr | read-only | current | The management IPv4 address of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.2.1.3 | Columnip4MgmtIntfInfoMask | read-only | current | The management IPv4 subnet mask of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.2.1.4 | Columnip4MgmtIntfInfoDHCPState | read-only | current | The management IPv4 DHCP state of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.2.1.5 | Columnip4MgmtIntfInfoStatus | read-only | current | The management IPv4 interface state. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.3 | Tableip6MgmtIntfInfoTable | not-accessible | current | The table of fabric unit management IPv6 interface information. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.3.1 | Rowip6MgmtIntfInfoEntry | not-accessible | current | A row in the fabric unit management IPv6 interface information table. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.3.1.1 | Columnip6MgmtIntfInfoMac | read-only | current | MAC address of the unit. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.3.1.2 | Columnip6MgmtIntfInfoAddr | read-only | current | The management IPv6 address of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.3.1.3 | Columnip6MgmtIntfInfoMask | read-only | current | The management IPv6 prefix length of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.3.1.4 | Columnip6MgmtIntfInfoStatus | read-only | current | The management IPv6 interface state. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.4 | Tableip4MgmtEmbeddedIntfInfoTable | not-accessible | current | The table of fabric unit internal management IPv4 interface information. These interfaces are only present on embedded members |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.4.1 | Rowip4MgmtEmbeddedIntfInfoEntry | not-accessible | current | A row in the fabric unit management IPv4 interface information table. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.4.1.1 | Columnip4MgmtEmbeddedIntfInfoMac | read-only | current | MAC address of the unit. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.4.1.2 | Columnip4MgmtEmbeddedIntfInfoAddr | read-only | current | The management IPv4 address of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.4.1.3 | Columnip4MgmtEmbeddedIntfInfoMask | read-only | current | The management IPv4 subnet mask of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.4.1.4 | Columnip4MgmtEmbeddedIntfInfoDHCPState | read-only | current | The management IPv4 DHCP state of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.9.4.1.5 | Columnip4MgmtEmbeddedIntfInfoStatus | read-only | current | The management IPv4 interface state. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.15 | NodedhcpInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.3.3.15.1 | ScalardhcpInfoMacAddr | read-only | current | The MAC address of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.15.2 | ScalardhcpInfoAddr | read-only | current | The IP address of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.15.3 | ScalardhcpInfoSubnetMask | read-only | current | The subnet mask of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.15.4 | ScalardhcpInfoDefaultGateway | read-only | current | The IP address of default gateway for the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.15.5 | ScalardhcpInfoServer | read-only | current | The IP address of the DHCP server that leased the ip of the interface. |
| 1.3.6.1.4.1.20301.2.7.21.3.3.15.6 | ScalardhcpInfoLeaseObtained | read-only | current | The time and date when the lease was obtained . |
| 1.3.6.1.4.1.20301.2.7.21.3.3.15.7 | ScalardhcpInfoLeaseExpires | read-only | current | The time and date when the lease was obtained . |
| 1.3.6.1.4.1.20301.2.7.21.7 | Nodetraps | |||
| 1.3.6.1.4.1.20301.2.7.21.7.0 | NodeibmSNMPv2Notifications | |||
| 1.3.6.1.4.1.20301.2.7.21.7.0.1 | NotificationswPrimaryPowerSupplyFailureNotify | current | A swPrimaryPowerSupplyFailure trap signifies that the primary power supply failed. | |
| 1.3.6.1.4.1.20301.2.7.21.7.0.97 | NotificationswPrimaryPowerSupplyFixedNotify | current | A swPrimaryPowerSupplyFixed trap signifies that the primary power supply has been restored. | |
| 1.3.6.1.4.1.20301.2.7.21.7.1 | NodeswPrimaryPowerSupplyFailure | A swPrimaryPowerSupplyFailure trap signifies that the primary power supply failed. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.2 | NodeswDefGwUp | A swDefGwUp trap signifies that the default gateway is alive. ip4CurCfgDataGwIndex is the index of the Gateway in ip4CurCfgDataGwTable. The range for ip4CurCfg… | ||
| 1.3.6.1.4.1.20301.2.7.21.7.3 | NodeswDefGwDown | A swDefGwDown trap signifies that the default gateway is down. ip4CurCfgDataGwIndex is the index of the Gateway in ip4CurCfgDataGwTable. The range for ip4CurCf… | ||
| 1.3.6.1.4.1.20301.2.7.21.7.4 | NodeswDefGwInService | A swDefGwInService trap signifies that the default gateway is up and in service. ip4CurCfgDataGwIndex is the index of the Gateway in ip4CurCfgDataGwTable. The … | ||
| 1.3.6.1.4.1.20301.2.7.21.7.5 | NodeswDefGwNotInService | A swDefGwNotInService trap signifies that the default gateway is alive but not in service. ip4CurCfgDataGwIndex is the index of the Gateway in ip4CurCfgDataGwT… | ||
| 1.3.6.1.4.1.20301.2.7.21.7.19 | NodeswLoginFailure | A swLoginFailure trap signifies that someone failed to enter a valid username/password combination. swTrapDisplayString specifies whether the login attempt was… | ||
| 1.3.6.1.4.1.20301.2.7.21.7.22 | NodeswTempExceedThreshold | A swTempExceedThreshold trap signifies that the switch temperature has exceeded maximum safety limits. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.24 | NodeswFanFailure | A swFanFailure trap signifies that the fan failure has been detected. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.25 | NodeswValidLogin | A swValidLogin trap signifies that a user login has occured. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.27 | NodeswApplyComplete | A swApplyComplete signifies that new configuration has been applied. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.28 | NodeswSaveComplete | A swApplyComplete signifies that new configuration has been saved. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.29 | NodeswFwDownloadSucess | A swFwDownloadSuccess signifies that firmware has been downloaded to [image1|image2|boot image]. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.30 | NodeswFwDownloadFailure | A swFwDownloadFailure signifies that firmware downloaded failed to [image1|image2|boot image]. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.31 | NodeswTempReturnThreshold | A swTempReturnThreshold trap signifies that the switch temperature has returned below maximum safety limits. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.33 | NodeswFanFailureFixed | A swFanFailureFixed trap signifies that the fan failure has been fixed. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.46 | NodeswHotlinksMasterUp | A swHotlinksMasterUp trap signifies that the Master interface is active. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.47 | NodeswHotlinksMasterDn | A swHotlinksMasterDn trap signifies that the Master interface is not active. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.48 | NodeswHotlinksBackupUp | A swHotlinksBackupUp trap signifies that the Backup interface is active. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.49 | NodeswHotlinksBackupDn | A swHotlinksBackupDn trap signifies that the Backup interface is not active. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.50 | NodeswHotlinksNone | A swHotlinksNone trap signifies that there are no active interfaces. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.51 | NodesfpInserted | A sfpInserted trap signifies that a SFP is inserted. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.52 | NodesfpRemoved | A sfpRemoved trap signifies that a SFP is removed. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.61 | NodeswNTPSyncFailed | A swNTPSyncFailed trap signifies that sync with NTP server failed. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.62 | NodeswNTPUpdateClock | A swNTPUpdateClock trap signifies that update system clock with NTP server. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.63 | NodeswValidLogout | A swValidLogout trap signifies that a user logout has occured. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.65 | NodeswECMPGatewayUp | A swECMPGatewayUp trap signifies that the ECMP gateway is up. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.66 | NodeswECMPGatewayDown | A swECMPGatewayDown trap signifies that the ECMP gateway is down. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.67 | NodeswTeamingCtrlUp | A swTeamingCtrlUp trap signifies that the teaming is up. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.68 | NodeswTeamingCtrlDown | A swTeamingCtrlDown trap signifies that the teaming control is down. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.69 | NodeswTeamingCtrlDownTearDownBlked | A swTeamingCtrlDownTearDownBlked trap signifies that the teaming control is down but teardown is blocked. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.70 | NodeswTeamingCtrlError | A swTeamingCtrlError trap signifies error, action is undefined. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.71 | NodeswLACPPortBlocked | A swLACPPortBlocked trap signifies that LACP is operationally down on a port, and traffic is blocked on the port. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.72 | NodeswLACPPortUnblocked | A swLACPPortUnblocked trap signifies that LACP is operationally up on a port, and traffic is no longer blocked on the port. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.73 | NodeswFabricSwitchAttached | A swFabricSwitchAttached trap signifies that a new switch has attached to the fabric. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.74 | NodeswFabricSwitchDettached | A swFabricSwitchDettached trap signifies that a new switch has detached from the fabric. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.75 | NodeswFabricBackupPresent | A swFabricBackupPresent trap signifies that a new backup has been set. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.76 | NodeswFabricBackupGone | A swFabricBackupGone trap signifies that the backup switch has been made unavailable. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.77 | NodeswVMGroupVMotion | A swVMGroupVMotion trap signifies that a virtual machine has moved from a port to another. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.78 | NodeswVMGroupVMOnline | A swVMGroupVMOnline trap signifies that a advance provisioned virtual machine has came online. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.79 | NodeswVMGroupVMVlanChange | A swVMGroupVMVlanChange trap signifies that a virtual machine has entered into a vlan, or changed the vlan. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.80 | NodeswFabricMasterAfterInit | A swFabricMasterAfterInit trap signifies that the switch has become master after init | ||
| 1.3.6.1.4.1.20301.2.7.21.7.81 | NodeswFabricMasterFromBackup | A swFabricMasterFromBackup trap signifies that the switch has become master from backup. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.82 | NodeswFabricDuplicateJoinAttempt | A swFabricDuplicateJoinAttempt trap signifies that a new switch with duplicate UUID/bay has tried to join the fabric. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.83 | NodeswFabricLinkUp | swFabricLinkUp signifies that a fabric link has become up. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.84 | NodeswFabricLinkDown | A swFabricLinkDown trap signifies that a fabric link has become down. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.85 | NodeswFabricXferError | A swFabricXferError trap signifies that a transfer between the master and a member has terminated with error. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.86 | NodeswFabricXferSuccess | A swFabricXferSuccess trap signifies that a transfer between the master and a member has terminated with no errors. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.87 | NodeswFabricSwitchTypeMismatch | A swFabricSwitchTypeMismatch trap signifies that a new switch of different type has attempted to join the fabric. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.88 | NodeswFabricImageSlotMismatch | A swFabricImageSlotMismatch trap signifies that the slot of the boot image of a newly attached switch does not match that of the master. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.89 | NodeswFabricImageVersMismatch | A swFabricImageVersMismatch trap signifies that the version of the boot image of a newly attached switch does not match that of the master. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.90 | NodeswFabricChassisTypeMismatch | A swFabricChassisTypeMismatch trap signifies that a new switch in a chassis of different and incompatible type has attempted to join the fabric. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.91 | NodeswFabricBcsBayMismatch | A swFabricBcsBayMismatch trap signifies that a new switch in a BCS chassis in bay with different and incompatible port mapping has attempted to join the fabric. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.92 | NodeswFabricBootCfgMismatch | A swFabricBootCfgMismatch trap signifies that the booted config of a newly attached switch does not match that of the master. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.93 | NodeswFabricNvramMasterJoin | A swFabricNvramMasterJoin trap signifies that a switch which was configured as a master in NVRAM has attached to the fabric. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.94 | NodeswFabricForceDetach | A swFabricForceDetach trap signifies that the master has sent a FORCE DETACH message to a member. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.97 | NodeswPrimaryPowerSupplyFixed | A swPrimaryPowerSupplyFixed trap signifies that the primary power supply has been restored. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.112 | NodeswVmCheckSpoofedvm | A vmCheckSpoofedvm trap signifies that a spoofed VM MAC was found. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.158 | Nodesw8021x | A sw8021x trap is sent when dot1x feature is enabled. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.162 | NodeswDefAdminDisable | A swDefAdminDisable trap signifies that default admin account has been disabled. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.163 | NodeswAcntStrngPswdNotMet | A swAcntStrngPswdNotMet trap signifies that configured password does not match strong password complexity. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.164 | NodeswAcntLocked | A swAcntLocked trap signifies that account has been locked. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.165 | NodeswAcntUnlocked | A swAcntUnlocked trap signifies that account has been unlocked. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.166 | NodeswFabricSwitchcoldStart | A swFabricSwitchcoldStart trap signifies that a Fabric Member is reinitializing itself such that neither the agent configuration nor the protocol entity implem… | ||
| 1.3.6.1.4.1.20301.2.7.21.7.167 | NodeswFabricSwitchwarmStart | A swFabricSwitchwarmStart trap signifies that a Fabric Member is reinitializing itself such that neither the agent configuration nor the protocol entity implem… | ||
| 1.3.6.1.4.1.20301.2.7.21.7.174 | NodeswMgmtGwUp | A swMgmtGwUp trap signifies that the default gateway is alive. ip4CurCfgMgmtGwMac is the index of the Gateway in ip4CurCfgMgmtGwTable. ip4CurCfgGwAddr is the I… | ||
| 1.3.6.1.4.1.20301.2.7.21.7.175 | NodeswMgmtGwDown | A swMgmtGwDown trap signifies that the default gateway is down. ip4CurCfgMgmtGwMac is the index of the Gateway in ip4CurCfgMgmtGwTable. ip4CurCfgGwAddr is the … | ||
| 1.3.6.1.4.1.20301.2.7.21.7.176 | NodeswMgmtGwInService | A swMgmtGwInService trap signifies that the default gateway is up and in service. ip4CurCfgMgmtGwMac is the index of the Gateway in ip4CurCfgMgmtGwTable. ip4Cu… | ||
| 1.3.6.1.4.1.20301.2.7.21.7.177 | NodeswMgmtGwNotInService | A swMgmtGwNotInService trap signifies that the default gateway is alive but not in service. ip4CurCfgMgmtGwMac is the index of the Gateway in ip4CurCfgMgmtGwTa… | ||
| 1.3.6.1.4.1.20301.2.7.21.7.178 | NodeswFcZoneErr | This trap specifies the FC zoning configuration errors | ||
| 1.3.6.1.4.1.20301.2.7.21.7.184 | NodeswARPtablefull | A swARPtablefull trap signifies that ARP table is full. | ||
| 1.3.6.1.4.1.20301.2.7.21.7.1000 | ScalarswTrapDisplayString | read-only | current | Temporary string object used to store information being sent in a Switch trap. |
| 1.3.6.1.4.1.20301.2.7.21.8 | Nodeqos | |||
| 1.3.6.1.4.1.20301.2.7.21.8.1 | NodeqosConfig | |||
| 1.3.6.1.4.1.20301.2.7.21.8.1.1 | Nodeqos8021p | |||
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.1 | TableqosCurCfgPortPriorityTable | not-accessible | current | The table of QOS Port Priority configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.1.1 | RowqosCurCfgPortPriorityEntry | not-accessible | current | Information about a particular QOS Port Priority configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.1.1.1 | ColumnqosCurCfgPortIndex | read-only | current | Switch Port Number |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.1.1.2 | ColumnqosCurCfgPortPriority | read-only | current | Switch Port Priority Should be between 0 and 7 |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.1.1.3 | ColumnqosCurCfgPortAlias | read-only | current | Switch Port Alias |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.2 | TableqosNewCfgPortPriorityTable | not-accessible | current | The table of QOS Port Priority configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.2.1 | RowqosNewCfgPortPriorityEntry | not-accessible | current | Information about a particular QOS Port Priority configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.2.1.1 | ColumnqosNewCfgPortIndex | read-only | current | Switch Port Number |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.2.1.2 | ColumnqosNewCfgPortPriority | read-write | current | Switch Port Priority Should be between 0 and 7 |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.2.1.3 | ColumnqosNewCfgPortAlias | read-only | current | Switch Port Alias |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.3 | TableqosCurCfgPriorityCoSTable | not-accessible | current | The table of Frame Priority and COSq configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.3.1 | RowqosCurCfgPriorityCoSEntry | not-accessible | current | Information about a particular Frame Priority and COSq configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.3.1.1 | ColumnqosCurCfgPriorityIndex | read-only | current | Frame priority Number |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.3.1.2 | ColumnqosCurCfgPriorityCoSq | read-only | current | CoSq for a Frame Priority Should be between 0 and 7 |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.4 | TableqosNewCfgPriorityCoSTable | not-accessible | current | The table of Frame Priority and COSq configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.4.1 | RowqosNewCfgPriorityCoSEntry | not-accessible | current | Information about a particular Frame Priority and COSq configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.4.1.1 | ColumnqosNewCfgPriorityIndex | read-only | current | Frame priority Number |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.4.1.2 | ColumnqosNewCfgPriorityCoSq | read-write | current | CoSq for a Frame Priority Should be between 0 and 7 |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.5 | TableqosCurCfgCosWeightTable | not-accessible | current | The table of CoSq and Weight configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.5.1 | RowqosCurCfgCosWeightEntry | not-accessible | current | Information about a particular CoSq and Weight configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.5.1.1 | ColumnqosCurCfgCosIndex | read-only | current | CoSq Number |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.5.1.2 | ColumnqosCurCfgCosWeight | read-only | current | Weight of CoSq |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.6 | TableqosNewCfgCosWeightTable | not-accessible | current | The table of CoSq and Weight configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.6.1 | RowqosNewCfgCosWeightEntry | not-accessible | current | Information about a particular CoSq and Weight configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.6.1.1 | ColumnqosNewCfgCosIndex | read-only | current | CoSq Number |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.6.1.2 | ColumnqosNewCfgCosWeight | read-write | current | Weight of CoSq |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.7 | TableqosCurCfgMcPriorityCoSTable | not-accessible | current | The table of Frame Priority and Multicast COSq configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.7.1 | RowqosCurCfgMcPriorityCoSEntry | not-accessible | current | Information about a particular Frame Priority and Multicast COSq configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.7.1.1 | ColumnqosCurCfgMcPriorityIndex | read-only | current | Frame priority Number |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.7.1.2 | ColumnqosCurCfgMcPriorityCoSq | read-only | current | Multicast CoSq for a Frame Priority Should be between 8 and 11 |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.8 | TableqosNewCfgMcPriorityCoSTable | not-accessible | current | The table of Frame Priority and Multicast COSq configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.8.1 | RowqosNewCfgMcPriorityCoSEntry | not-accessible | current | Information about a particular Frame Priority and Multicast COSq configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.8.1.1 | ColumnqosNewCfgMcPriorityIndex | read-only | current | Frame priority Number |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.8.1.2 | ColumnqosNewCfgMcPriorityCoSq | read-write | current | Multicast CoSq for a Frame Priority Should be between 8 and 11 |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.9 | TableqosCurCfgMcCosWeightTable | not-accessible | current | The table of Mc CoSq and Weight configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.9.1 | RowqosCurCfgMcCosWeightEntry | not-accessible | current | Information about a particular Mc CoSq and Weight configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.9.1.1 | ColumnqosCurCfgMcCosIndex | read-only | current | Multicast CoSq Number |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.9.1.2 | ColumnqosCurCfgMcCosWeight | read-only | current | Weight of Mc CoSq |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.10 | TableqosNewCfgMcCosWeightTable | not-accessible | current | The table of Mc CoSq and Weight configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.10.1 | RowqosNewCfgMcCosWeightEntry | not-accessible | current | Information about a particular Mc CoSq and Weight configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.10.1.1 | ColumnqosNewCfgMcCosIndex | read-only | current | Multicast CoSq Number |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.10.1.2 | ColumnqosNewCfgMcCosWeight | read-write | current | Weight of Mc CoSq |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.11 | ScalarqosCurCfgCosNum | read-only | current | Number of CoSq. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.1.13 | ScalarqosDefaultCfg | read-write | current | This is to set QoS configuration to default. none(0) is returned always when read. defaultCosNum(1): Sets COS queue number to default defaultWeight(2): Sets CO… |
| 1.3.6.1.4.1.20301.2.7.21.8.1.2 | Nodeqosdscp | |||
| 1.3.6.1.4.1.20301.2.7.21.8.1.2.1 | TableqosCurCfgDscpTable | not-accessible | current | The table of Dscp to New Dscp/802.1p priority configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.2.1.1 | RowqosCurCfgDscpEntry | not-accessible | current | Information about a particular Dscp to New Dscp/802.1p priority configuration |
| 1.3.6.1.4.1.20301.2.7.21.8.1.2.1.1.1 | ColumnqosCurCfgDscpIndex | read-only | current | Dscp value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.2.1.1.2 | ColumnqosCurCfgMapDscp | read-only | current | Map Dscp Value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.2.1.1.3 | ColumnqosCurCfgMap8021p | read-only | current | Map 802.1p value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.2.2 | TableqosNewCfgDscpTable | not-accessible | current | The table of Dscp to New Dscp/802.1p priority configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.2.2.1 | RowqosNewCfgDscpEntry | not-accessible | current | Information about a particular Dscp to New Dscp/802.1p priority configuration |
| 1.3.6.1.4.1.20301.2.7.21.8.1.2.2.1.1 | ColumnqosNewCfgDscpIndex | read-only | current | Dscp value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.2.2.1.2 | ColumnqosNewCfgMapDscp | read-write | current | Map Dscp Value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.2.2.1.3 | ColumnqosNewCfgMap8021p | read-write | current | Map 802.1p value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.2.3 | ScalarqosCurCfgDscpState | read-only | current | This is for turning on/off DSCP globally. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.2.4 | ScalarqosNewCfgDscpState | read-write | current | This is for turning on/off DSCP globally. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3 | Nodeqoswredecn | |||
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.1 | TableqosCurCfgPortProfileTable | not-accessible | current | The table of QOS port WRED ECN profile configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1 | RowqoSCurCfgPortProfileEntry | not-accessible | current | Information about a particular Transmit queue of a port WRED ECN profile configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.1 | ColumnqosCurCfgProfilePortIndex | read-only | current | Switch Port Number |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.2 | ColumnqosCurCfgTrqIndex | read-only | current | Transmit Queue Number |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.3 | ColumnqosCurCfgTrqNonTcpMin | read-only | current | Port Transmit queue WRED ECN nontcp profile MinThreshold value. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.4 | ColumnqosCurCfgTrqNonTcpMax | read-only | current | Port Transmit queue WRED ECN nontcp profile MaxThreshold value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.5 | ColumnqosCurCfgTrqNonTcpRate | read-only | current | Port Transmit queue WRED ECN nontcp profile DropRate value. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.6 | ColumnqosCurCfgTrqTcpMin | read-only | current | Port Transmit queue WRED ECN tcp profile MinThreshold value. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.7 | ColumnqosCurCfgTrqTcpMax | read-only | current | Port Transmit queue WRED ECN tcp profile MaxThreshold value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.8 | ColumnqosCurCfgTrqTcpRate | read-only | current | Port Transmit queue WRED ECN tcp profile DropRate value. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.9 | ColumnqosCurCfgPortTrqWredState | read-only | current | This is for turning on/off WRED per transmit queue per port. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.1.1.10 | ColumnqosCurCfgProfilePortAlias | read-only | current | The port alias. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.2 | TableqosNewCfgPortProfileTable | not-accessible | current | The table of QOS Port WRED ECN configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1 | RowqoSNewCfgPortProfileEntry | not-accessible | current | Information about a particular Transmit queue of a port WRED ECN configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.1 | ColumnqosNewCfgProfilePortIndex | read-only | current | Switch Port Number |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.2 | ColumnqosNewCfgTrqIndex | read-only | current | Transmit Queue Number |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.3 | ColumnqosNewCfgTrqNonTcpMin | read-write | current | Port Transmit queue WRED ECN nontcp profile MinThreshold value. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.4 | ColumnqosNewCfgTrqNonTcpMax | read-write | current | Port Transmit queue WRED ECN nontcp profile MaxThreshold value. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.5 | ColumnqosNewCfgTrqNonTcpRate | read-write | current | Port Transmit queue WRED ECN nontcp profile DropRate value. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.6 | ColumnqosNewCfgTrqTcpMin | read-write | current | Port Transmit queue WRED ECN tcp profile MinThreshold value. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.7 | ColumnqosNewCfgTrqTcpMax | read-write | current | Port Transmit queue WRED ECN tcp profile MaxThreshold value. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.8 | ColumnqosNewCfgTrqTcpRate | read-write | current | Port Transmit queue WRED ECN tcp profile DropRate value. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.9 | ColumnqosNewCfgPortTrqWredState | read-write | current | This is for turning on/off WRED per transmit queue per port. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.2.1.10 | ColumnqosNewCfgProfilePortAlias | read-only | current | The port alias. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.3 | TableqosCurCfgPortStateTable | not-accessible | current | The table of QOS port WRED ECN state configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.3.1 | RowqoSCurCfgPortStateEntry | not-accessible | current | Information about a particular port WRED ECN state configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.3.1.1 | ColumnqosCurCfgStatePortIndex | read-only | current | Switch Port Number |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.3.1.2 | ColumnqosCurCfgPortWredState | read-only | current | This is for turning on/off WRED per port. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.3.1.3 | ColumnqosCurCfgPortEcnState | read-only | current | This is for turning on/off ECN per port. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.3.1.4 | ColumnqosCurCfgStatePortAlias | read-only | current | Switch Port Alias |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.4 | TableqosNewCfgPortStateTable | not-accessible | current | The table of QOS port WRED ECN state configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.4.1 | RowqoSNewCfgPortStateEntry | not-accessible | current | Information about a particular port WRED ECN state configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.4.1.1 | ColumnqosNewCfgStatePortIndex | read-only | current | Switch Port Number |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.4.1.2 | ColumnqosNewCfgPortWredState | read-write | current | This is for turning on/off WRED per port |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.4.1.3 | ColumnqosNewCfgPortEcnState | read-write | current | This is for turning on/off ECN per port. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.4.1.4 | ColumnqosNewCfgStatePortAlias | read-only | current | Switch Port Alias |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.5 | TableqosCurCfgGlobalProfileTable | not-accessible | current | The table of QOS global WRED ECN profile configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1 | RowqoSCurCfgGlobalProfileEntry | not-accessible | current | Information about a particular Transmit queue of global WRED ECN profile configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.1 | ColumnqosCurCfgGlobalTrqIndex | read-only | current | Global Transmit Queue Number |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.2 | ColumnqosCurCfgGlobalTrqNonTcpMin | read-only | current | Global transmit queue WRED ECN nontcp profile MinThreshold value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.3 | ColumnqosCurCfgGlobalTrqNonTcpMax | read-only | current | Global transmit queue WRED ECN nontcp profile MaxThreshold value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.4 | ColumnqosCurCfgGlobalTrqNonTcpRate | read-only | current | Global transmit queue WRED ECN nontcp profile DropRate value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.5 | ColumnqosCurCfgGlobalTrqTcpMin | read-only | current | Global transmit queue WRED ECN tcp profile MinThreshold value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.6 | ColumnqosCurCfgGlobalTrqTcpMax | read-only | current | Global transmit queue WRED ECN tcp profile MaxThreshold value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.7 | ColumnqosCurCfgGlobalTrqTcpRate | read-only | current | Global transmit queue WRED ECN tcp profile DropRate value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.5.1.8 | ColumnqosCurCfgGlobalTrqWredState | read-only | current | This is for turning on/off WRED per global transmit queue |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.6 | TableqosNewCfgGlobalProfileTable | not-accessible | current | The table of QOS global WRED ECN profile configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1 | RowqoSNewCfgGlobalProfileEntry | not-accessible | current | Information about a particular Transmit queue of global WRED ECN profile configuration. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.1 | ColumnqosNewCfgGlobalTrqIndex | read-only | current | Global Transmit Queue Number |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.2 | ColumnqosNewCfgGlobalTrqNonTcpMin | read-write | current | Global transmit queue WRED ECN nontcp profile MinThreshold value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.3 | ColumnqosNewCfgGlobalTrqNonTcpMax | read-write | current | Global transmit queue WRED ECN nontcp profile MaxThreshold value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.4 | ColumnqosNewCfgGlobalTrqNonTcpRate | read-write | current | Global transmit queue WRED ECN nontcp profile DropRate value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.5 | ColumnqosNewCfgGlobalTrqTcpMin | read-write | current | Global transmit queue WRED ECN tcp profile MinThreshold value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.6 | ColumnqosNewCfgGlobalTrqTcpMax | read-write | current | Global transmit queue WRED ECN tcp profile MaxThreshold value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.7 | ColumnqosNewCfgGlobalTrqTcpRate | read-write | current | Global transmit queue WRED ECN tcp profile DropRate value |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.6.1.8 | ColumnqosNewCfgGlobalTrqWredState | read-write | current | This is for turning on/off WRED per global transmit queue |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.7 | ScalarqosCurCfgGlobalWredState | read-only | current | This is for turning on/off WRED globally. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.8 | ScalarqosCurCfgGlobalEcnState | read-only | current | This is for turning on/off ECN globally. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.9 | ScalarqosNewCfgGlobalWredState | read-write | current | This is for turning on/off WRED globally. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.3.10 | ScalarqosNewCfgGlobalEcnState | read-write | current | This is for turning on/off ECN globally. |
| 1.3.6.1.4.1.20301.2.7.21.8.1.5 | Nodeqosucbw | |||
| 1.3.6.1.4.1.20301.2.7.21.8.1.5.1 | ScalarqosCurCfgUcBw | read-only | current | QoS unicast bandwidth |
| 1.3.6.1.4.1.20301.2.7.21.8.1.5.2 | ScalarqosNewCfgUcBw | read-write | current | Set QoS unicast bandwidth |
| 1.3.6.1.4.1.20301.2.7.21.9 | Nodeacl | |||
| 1.3.6.1.4.1.20301.2.7.21.9.1 | NodeacConfig | |||
| 1.3.6.1.4.1.20301.2.7.21.9.1.1 | NodeacList | |||
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1 | TableaclCurCfgTable | not-accessible | current | The table of current ACL configuration. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1 | RowaclCurCfgEntry | not-accessible | current | Current information about a particular ACL configuration entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.1 | ColumnaclCurCfgIndex | read-only | current | The index associated with this ACL entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.3 | ColumnaclCurCfgGroup | read-only | current | The index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.4 | ColumnaclCurCfgFilterAction | read-only | current | The action to be performed on a packet that matches the filter settings of this ACL entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.5 | ColumnaclCurCfgFilterActionSetPrio | read-only | current | The value to be used when the action to be performed is setprio for this ACL entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.6 | ColumnaclCurCfgEthFmt | read-only | current | The packet ethernet format to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.7 | ColumnaclCurCfgTagFmt | read-only | current | The packet tag format to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.8 | ColumnaclCurCfgIPFmt | read-only | current | The packet IP format to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.9 | ColumnaclCurCfgSrcMACAddress | read-only | current | The source MAC address to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.10 | ColumnaclCurCfgSrcMACMask | read-only | current | The address mask applied to aclCurCfgSrcMACAddress for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.11 | ColumnaclCurCfgDstMACAddress | read-only | current | The destination MAC address to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.12 | ColumnaclCurCfgDstMACMask | read-only | current | The address mask applied to aclCurCfgDstMACAddress for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.13 | ColumnaclCurCfgEthernetTypeName | read-only | current | The Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be fil… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.14 | ColumnaclCurCfgEthernetTypeValue | read-only | current | The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthe… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.15 | ColumnaclCurCfgVLanId | read-only | current | The virtual LAN identifier to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.16 | ColumnaclCurCfgVLanMask | read-only | current | The mask applied to aclCurCfgVLanId for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.17 | ColumnaclCurCfg8021pPriority | read-only | current | The 802.1p priority to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.18 | ColumnaclCurCfgTypeOfService | read-only | current | The type of service to be filtered. 'none' for not initialised, within the range 0-255 |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.19 | ColumnaclCurCfgProtocol | read-only | current | The protocol to be filtered. 'none' for not initialised, within the range 0-255 |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.20 | ColumnaclCurCfgSrcIPAddress | read-only | current | The source IP address to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.21 | ColumnaclCurCfgSrcIPMask | read-only | current | The address mask applied to aclCurCfgSrcIPAddress for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.22 | ColumnaclCurCfgDstIPAddress | read-only | current | The destination IP address to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.23 | ColumnaclCurCfgDstIPMask | read-only | current | The address mask applied to aclCurCfgDstIPAddress for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.24 | ColumnaclCurCfgSrcPort | read-only | current | The source TCP/UDP port number to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.25 | ColumnaclCurCfgSrcPortMask | read-only | current | The mask applied to aclCurCfgSrcPort for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.26 | ColumnaclCurCfgDstPort | read-only | current | The destination TCP/UDP port number to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.27 | ColumnaclCurCfgDstPortMask | read-only | current | The mask applied to aclCurCfgDstPort for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.28 | ColumnaclCurCfgTCPFlags | read-only | current | The TCP flags to be filtered. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |_… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.29 | ColumnaclCurCfgEgressPortIndexes | read-only | current | The port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... |… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.30 | ColumnaclCurCfgStatistics | read-only | current | Whether statistics collection for this ACL is enabled or not. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.39 | ColumnaclCurCfgTCPFlagsMask | read-only | current | The TCP flags mask. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________res… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.41 | ColumnaclCurCfgMeterAction | read-only | current | Meter Action for this ACL. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.42 | ColumnaclCurCfgMeterEnable | read-only | current | Meter state for this ACL. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.43 | ColumnaclCurCfgKbitsSec | read-only | current | The commited rate of meter associated with this ACL entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.44 | ColumnaclCurCfgKbitsBurst | read-only | current | The maxmium burst sizeof meter associated with this ACL entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.45 | ColumnaclCurCfgUser | read-only | current | Set user defined priority for this ACL. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.46 | ColumnaclCurCfgInprofDscp | read-only | current | Set in profile pkts DSCP value. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.47 | ColumnaclCurCfgTos | read-only | current | To enable/disable setting pkts based on TOS bits. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.48 | ColumnaclCurCfgOutprofDscp | read-only | current | Set out profile pkts DSCP value. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.49 | ColumnaclCurCfgUserEnable | read-only | current | Set update method for this ACL. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.50 | ColumnaclCurCfgInprofDscpEnable | read-only | current | Whether in profile update DSCP for this ACL is enabled or not. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.51 | ColumnaclCurCfgOutprofDscpEnable | read-only | current | Whether out profile update DSCP for this ACL is enabled or not. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.74 | ColumnaclCurCfgMirrorPortIndex | read-only | current | Set port in the ACL for mirroring. n > 0 - the represented port is configured for mirroring. 0 - the represented port is not configured for mirroring. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.81 | ColumnaclCurCfgLog | read-only | current | Whether log for this ACL is enabled or not. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.91 | ColumnaclCurCfgMirrorPortAlias | read-only | current | The mirror port alias. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.1.1.92 | ColumnaclCurCfgEgressPortAliases | read-only | current | The egress port alias. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2 | TableaclNewCfgTable | not-accessible | current | The table of new ACL configuration. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1 | RowaclNewCfgEntry | not-accessible | current | New information about a particular ACL configuration. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.1 | ColumnaclNewCfgIndex | read-only | current | The index associated with this ACL entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.3 | ColumnaclNewCfgGroup | read-only | current | The index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.4 | ColumnaclNewCfgFilterAction | read-write | current | The action to be performed on a packet that matches the filter settings of this ACL entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.5 | ColumnaclNewCfgFilterActionSetPrio | read-write | current | The COS queue to be used when the action for this ACL entry is set to setprio. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.6 | ColumnaclNewCfgEthFmt | read-write | current | The packet ethernet format to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.7 | ColumnaclNewCfgTagFmt | read-write | current | The packet tagging format to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.8 | ColumnaclNewCfgIPFmt | read-write | current | The packet IP format to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.9 | ColumnaclNewCfgSrcMACAddress | read-write | current | The source MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcMACMask object, if not yet set, will be automatically se… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.10 | ColumnaclNewCfgSrcMACMask | read-write | current | The address mask to be applied to aclNewCfgSrcMACAddress for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.11 | ColumnaclNewCfgDstMACAddress | read-write | current | The destination MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstMACMask object, if not yet set, will be automatical… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.12 | ColumnaclNewCfgDstMACMask | read-write | current | The address mask to be applied to aclNewCfgDstMACAddress for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.13 | ColumnaclNewCfgEthernetTypeName | read-write | current | The Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be fil… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.14 | ColumnaclNewCfgEthernetTypeValue | read-write | current | The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthe… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.15 | ColumnaclNewCfgVLanId | read-write | current | The virtual LAN identifier to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgVLanMask object, if not yet set, will be automatically … |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.16 | ColumnaclNewCfgVLanMask | read-write | current | The mask to be applied to aclNewCfgVLanId for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.17 | ColumnaclNewCfg8021pPriority | read-write | current | The 802.1p priority to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.18 | ColumnaclNewCfgTypeOfService | read-write | current | The type of service to be filtered. 'none' for not initialised, within the range 0-255 |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.19 | ColumnaclNewCfgProtocol | read-write | current | The protocol to be filtered. 'none' for not initialised, within the range 0-255 |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.20 | ColumnaclNewCfgSrcIPAddress | read-write | current | The source IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set, will be automatically set … |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.21 | ColumnaclNewCfgSrcIPMask | read-write | current | The address mask to be applied to aclNewCfgSrcIPAddress for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.22 | ColumnaclNewCfgDstIPAddress | read-write | current | The destination IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstIPMask object, if not yet set, will be automatically… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.23 | ColumnaclNewCfgDstIPMask | read-write | current | The address mask to be applied to aclNewCfgDstIPAddress for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.24 | ColumnaclNewCfgSrcPort | read-write | current | The source TCP/UDP port number to be filtered. Whenever this object is set if the aclNewCfgSrcPortMask object is not set will be automatically set to 65535 (0x… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.25 | ColumnaclNewCfgSrcPortMask | read-write | current | The mask to be applied to aclNewCfgSrcPort for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.26 | ColumnaclNewCfgDstPort | read-write | current | The destination TCP/UDP port number to be filtered. Whenever this object is set the aclNewCfgSrcPortMask object, if not yet set, will be automatically set to 6… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.27 | ColumnaclNewCfgDstPortMask | read-write | current | The mask to be applied to aclNewCfgDstPort for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.28 | ColumnaclNewCfgTCPFlags | read-write | current | The TCP flags to be filtered. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.29 | ColumnaclNewCfgEgressPortIndexes | read-only | current | The port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... |… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.30 | ColumnaclNewCfgStatistics | read-write | current | Whether statistics collection for this ACL is enabled or not. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.31 | ColumnaclNewCfgAddEgressPortIndex | read-write | current | The port to be added to the specified ACL for egress filtering. A value of zero is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.32 | ColumnaclNewCfgRemoveEgressPortIndex | read-write | current | The port to be removed from the specified ACL. A value of zero is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.33 | ColumnaclNewCfgDelete | read-write | current | This is an action object to delete an ACL entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.39 | ColumnaclNewCfgTCPFlagsMask | read-write | current | The TCP flags mask. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpAC… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.41 | ColumnaclNewCfgMeterAction | read-write | current | Meter Action for this ACL. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.42 | ColumnaclNewCfgMeterEnable | read-write | current | Meter state for this ACL. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.43 | ColumnaclNewCfgKbitsSec | read-write | current | The commited rate of meter associated with this ACL entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.44 | ColumnaclNewCfgKbitsBurst | read-write | current | The maximum burst size of the meter associated with this ACL entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.45 | ColumnaclNewCfgUser | read-write | current | Set user defined priority for this ACL. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.46 | ColumnaclNewCfgInprofDscp | read-write | current | Set in profile pkts DSCP value. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.47 | ColumnaclNewCfgTos | read-write | current | To enable/disable setting pkts based on TOS bits. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.48 | ColumnaclNewCfgOutprofDscp | read-write | current | Set out profile pkts DSCP value. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.49 | ColumnaclNewCfgUserEnable | read-write | current | Set update method for this ACL. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.50 | ColumnaclNewCfgInprofDscpEnable | read-write | current | Whether in profile update DSCP for this ACL is enabled or not. Only the value disable(0) can be set, causing the in profile update DSCP to be disabled for this… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.51 | ColumnaclNewCfgOutprofDscpEnable | read-write | current | Whether out profile update DSCP for this ACL is enabled or not. Only the value disable(0) can be set, causing the out profile update DSCP to be disabled for th… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.52 | ColumnaclNewCfgReset | read-write | current | This is an action object to reset an ACL entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.53 | ColumnaclNewCfgEthernetReset | read-write | current | This is an action object to reset an ACL Ethernet entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.54 | ColumnaclNewCfgIpv4Reset | read-write | current | This is an action object to reset an ACL IPV4 entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.55 | ColumnaclNewCfgTcpudpReset | read-write | current | This is an action object to reset an ACL Tcpudp entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.56 | ColumnaclNewCfgMeterReset | read-write | current | This is an action object to reset an ACL Meter entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.57 | ColumnaclNewCfgRemarkReset | read-write | current | This is an action object to reset an ACL Remark entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.58 | ColumnaclNewCfgRemarkInprofReset | read-write | current | This is an action object to reset an ACL Remark Inprof entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.59 | ColumnaclNewCfgRemarkOutprofReset | read-write | current | This is an action object to reset an ACL Remark Outprof entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.60 | ColumnaclNewCfgPktfmtReset | read-write | current | This is an action object to reset an ACL Pktfmt entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.74 | ColumnaclNewCfgMirrorPortIndex | read-write | current | Set port in the ACL for mirroring. n > 0 - the represented port is configured for mirroring. 0 - the represented port is not configured for mirroring. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.81 | ColumnaclNewCfgLog | read-write | current | Whether log for this ACL is enabled or not. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.91 | ColumnaclNewCfgMirrorPortAlias | read-write | current | The mirror port alias. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.92 | ColumnaclNewCfgEgressPortAliases | read-only | current | The egress port alias. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.93 | ColumnaclNewCfgAddEgressPortAlias | read-write | current | The port to be added using it's alias to the specified ACL for egress filtering. A value of zero is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.2.1.94 | ColumnaclNewCfgRemoveEgressPortAlias | read-write | current | The port to be removed using it's alias to the specified ACL for egress filtering. A value of zero is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.1.5 | ScalaraclTableMaxSize | read-only | current | The maximum number of entries in the acl config tables. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.3 | NodeaclGroup | |||
| 1.3.6.1.4.1.20301.2.7.21.9.1.3.1 | TableaclGroupCurCfgTable | not-accessible | current | The table of current ACL Group configuration. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.3.1.1 | RowaclGroupCurCfgEntry | not-accessible | current | Information about a particular ACL configuration. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.3.1.1.1 | ColumnaclGroupCurCfgIndex | read-only | current | The index associated with this ACL Group entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.3.1.1.2 | ColumnaclGroupCurCfgMemberAcls | read-only | current | The ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ … |
| 1.3.6.1.4.1.20301.2.7.21.9.1.3.1.1.9 | ColumnaclGroupCurCfgMemberAcl6s | read-only | current | The ACL6 members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL6 9 || || || ||__… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.3.2 | TableaclGroupNewCfgTable | not-accessible | current | The table of new ACL Group configuration. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1 | RowaclGroupNewCfgEntry | not-accessible | current | New information about a particular ACL configuration. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.1 | ColumnaclGroupNewCfgIndex | read-only | current | The index associated with this ACL Group entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.2 | ColumnaclGroupNewCfgMemberAcls | read-only | current | The ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ … |
| 1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.4 | ColumnaclGroupNewCfgAddAcl | read-write | current | The index of the ACL entry to be added into this ACL group. A successful set operation on this object will also set the bit corresponding to the ACL entry in t… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.5 | ColumnaclGroupNewCfgRemoveAcl | read-write | current | The index of the ACL entry to be removed from this ACL group. A successful set operation on this object will unset the bit corresponding to the ACL entry in th… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.8 | ColumnaclGroupNewCfgDelete | read-write | current | This is an action object to delete an ACL group. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.9 | ColumnaclGroupNewCfgMemberAcl6s | read-only | current | The ACL6 members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL6 9 || || || ||__… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.10 | ColumnaclGroupNewCfgAddAcl6 | read-write | current | The index of the ACL6 entry to be added into this ACL group. A successful set operation on this object will also set the bit corresponding to the ACL6 entry in… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.3.2.1.11 | ColumnaclGroupNewCfgRemoveAcl6 | read-write | current | The index of the ACL entry to be removed from this ACL group. A successful set operation on this object will unset the bit corresponding to the ACL entry in th… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4 | NodeaclCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.1 | TableaclCurCfgPortTable | not-accessible | current | The table of port acl groups configuration. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.1.1 | RowaclCurCfgPortTableEntry | not-accessible | current | Information about a particular port acl configuration. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.1.1.1 | ColumnaclCurCfgPortIndex | read-only | current | The identifier of a particular port. This is also index to the entLogicalTable of Entity MIB. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.1.1.2 | ColumnaclCurCfgPortAclBmap | read-only | current | The acls applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2 .....… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.1.1.4 | ColumnaclCurCfgPortAclGrpBmap | read-only | current | The acl groups applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.1.1.13 | ColumnaclCurCfgPortAcl6Bmap | read-only | current | The acls applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 128. in receiving order: OCTET 1 OCTET 2 .....… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.1.1.14 | ColumnaclCurCfgPortAlias | read-only | current | The alias of a particular port. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.2 | TableaclNewCfgPortTable | not-accessible | current | The table of port acl configuration. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1 | RowaclNewCfgPortTableEntry | not-accessible | current | Information about a particular port acl groups configuration. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.1 | ColumnaclNewCfgPortIndex | read-only | current | The identifier of a particular port. This is also index to the entLogicalTable of Entity MIB. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.2 | ColumnaclNewCfgPortAddAcl | read-write | current | The acl to be added to the specified port. A '0' value is returned when read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.4 | ColumnaclNewCfgPortAddAclGrp | read-write | current | The acl group to be added to the specified port. A '0' value is returned when read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.5 | ColumnaclNewCfgPortRemoveAcl | read-write | current | The acl to be removed from the specified port. A '0' value is returned when read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.7 | ColumnaclNewCfgPortRemoveAclGrp | read-write | current | The acl group to be removed from the specified port. A '0' value is returned when read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.8 | ColumnaclNewCfgPortAclBmap | read-only | current | The acls applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2 .....… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.10 | ColumnaclNewCfgPortAclGrpBmap | read-only | current | The acl groups applied to the port. The acl groups are presented in bitmap format. This string displays group number from 1 to 4096. in receiving order: OCTET … |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.11 | ColumnaclNewCfgPortAddAcl6 | read-write | current | The acl6 to be added to the specified port. A '0' value is returned when read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.12 | ColumnaclNewCfgPortRemoveAcl6 | read-write | current | The acl6 to be removed from the specified port. A '0' value is returned when read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.13 | ColumnaclNewCfgPortAcl6Bmap | read-only | current | The acl6s applied to the port. The acl6s are presented in bitmap format. This string displays acl number from 1 to 128. in receiving order: OCTET 1 OCTET 2 ...… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.4.2.1.14 | ColumnaclNewCfgPortAlias | read-only | current | The alias of a particular port. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5 | Nodeacl6List | |||
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1 | Tableacl6CurCfgTable | not-accessible | current | The table of current ACL6 configuration. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1 | Rowacl6CurCfgEntry | not-accessible | current | Current information about a particular ACL6 configuration entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.1 | Columnacl6CurCfgIndex | read-only | current | The index associated with this ACL6 entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.2 | Columnacl6CurCfgGroup | read-only | current | The index of the ACL group to which this ACL6 entry is a member of. A value of zero means the ACL6 is not a member of any group. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.3 | Columnacl6CurCfgFilterAction | read-only | current | The action to be performed on a packet that matches the filter settings of this ACL6 entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.4 | Columnacl6CurCfgFilterActionSetPrio | read-only | current | The value to be used when the action to be performed is setprio for this ACL6 entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.5 | Columnacl6CurCfgSrcIPv6Address | read-only | current | The source IPv6 address to be filtered. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xx… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.6 | Columnacl6CurCfgSrcIPv6PrefixLen | read-only | current | The IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.7 | Columnacl6CurCfgDstIPv6Address | read-only | current | The destination IPv6 address to be filtered. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xx… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.8 | Columnacl6CurCfgDstIPv6PrefixLen | read-only | current | The IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.9 | Columnacl6CurCfgIPv6FlowLabel | read-only | current | The IPv6 FlowLabel to be filtered. 'none' for not initialised, within the range 0-1048575 |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.10 | Columnacl6CurCfgIPv6TrafficClass | read-only | current | The IPv6 Traffic Class to be filtered. 'none' for not initialised, within the range 0-255 |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.11 | Columnacl6CurCfgIPv6NextHeader | read-only | current | The IPv6 next header to be filtered. 'none' for not initialised, within the range 0-255 |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.12 | Columnacl6CurCfgSrcPort | read-only | current | The source TCP/UDP port number to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.13 | Columnacl6CurCfgSrcPortMask | read-only | current | The mask applied to acl6CurCfgSrcPort for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.14 | Columnacl6CurCfgDstPort | read-only | current | The destination TCP/UDP port number to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.15 | Columnacl6CurCfgDstPortMask | read-only | current | The mask applied to acl6CurCfgDstPort for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.16 | Columnacl6CurCfgTCPFlags | read-only | current | The TCP flags to be filtered. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |_… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.17 | Columnacl6CurCfgTCPFlagsMask | read-only | current | The TCP flags mask. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________res… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.18 | Columnacl6CurCfgEgressPortIndexes | read-only | current | The port list in the ACL6 configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... … |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.19 | Columnacl6CurCfgStatistics | read-only | current | Whether statistics collection for this ACL6 is enabled or not. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.20 | Columnacl6CurCfgUser | read-only | current | Set user defined priority for this ACL6. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.21 | Columnacl6CurCfgInprofDscp | read-only | current | Set in profile pkts DSCP value. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.22 | Columnacl6CurCfgTos | read-only | current | To enable/disable setting pkts based on TOS bits. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.24 | Columnacl6CurCfgUserEnable | read-only | current | Set update method for this ACL6. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.25 | Columnacl6CurCfgInprofDscpEnable | read-only | current | Whether in profile update DSCP for this ACL6 is enabled or not. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.26 | Columnacl6CurCfgLog | read-only | current | Whether log for this ACL is enabled or not. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.28 | Columnacl6CurCfgMeterAction | read-only | current | Meter Action for this ACL. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.29 | Columnacl6CurCfgMeterEnable | read-only | current | Meter state for this ACL. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.30 | Columnacl6CurCfgKbitsSec | read-only | current | The commited rate of meter associated with this ACL entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.31 | Columnacl6CurCfgKbitsBurst | read-only | current | The maxmium burst sizeof meter associated with this ACL entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.32 | Columnacl6CurCfgOutprofDscp | read-only | current | Set out profile pkts DSCP value. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.33 | Columnacl6CurCfgOutprofDscpEnable | read-only | current | Whether out profile update DSCP for this ACL is enabled or not. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.1.1.34 | Columnacl6CurCfgEgressPortAliases | read-only | current | The port alias in the ACL6 configured for egress filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2 | Tableacl6NewCfgTable | not-accessible | current | The table of new ACL6 configuration. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1 | Rowacl6NewCfgEntry | not-accessible | current | New information about a particular ACL6 configuration. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.1 | Columnacl6NewCfgIndex | read-only | current | The index associated with this ACL6 entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.2 | Columnacl6NewCfgGroup | read-only | current | The index of the ACL group to which this ACL6 entry is a member of. A value of zero means the ACL6 is not a member of any group. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.3 | Columnacl6NewCfgFilterAction | read-write | current | The action to be performed on a packet that matches the filter settings of this ACL6 entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.4 | Columnacl6NewCfgFilterActionSetPrio | read-write | current | The COS queue to be used when the action for this ACL6 entry is set to setprio. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.5 | Columnacl6NewCfgSrcIPv6Address | read-write | current | The source IPv6 address to be filtered. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xx… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.6 | Columnacl6NewCfgSrcIPv6PrefixLen | read-write | current | The IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.7 | Columnacl6NewCfgDstIPv6Address | read-write | current | The destination IPv6 address to be filtered. Address should be 4-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xx… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.8 | Columnacl6NewCfgDstIPv6PrefixLen | read-write | current | The IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.9 | Columnacl6NewCfgIPv6FlowLabel | read-write | current | The IPv6 flow label to be filtered. 'none' for not initialised, within the range 0-1048575 |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.10 | Columnacl6NewCfgIPv6TrafficClass | read-write | current | The IPv6 traffic class to be filtered. 'none' for not initialised, within the range 0-255 |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.11 | Columnacl6NewCfgIPv6NextHeader | read-write | current | The IPv6 next header to be filtered. 'none' for not initialised, within the range 0-255 |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.12 | Columnacl6NewCfgSrcPort | read-write | current | The source TCP/UDP port number to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.13 | Columnacl6NewCfgSrcPortMask | read-write | current | The mask applied to acl6CurCfgSrcPort for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.14 | Columnacl6NewCfgDstPort | read-write | current | The destination TCP/UDP port number to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.15 | Columnacl6NewCfgDstPortMask | read-write | current | The mask applied to acl6CurCfgDstPort for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.16 | Columnacl6NewCfgTCPFlags | read-write | current | The TCP flags to be filtered. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |_… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.17 | Columnacl6NewCfgTCPFlagsMask | read-write | current | The TCP flags mask. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________res… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.18 | Columnacl6NewCfgEgressPortIndexes | read-only | current | The port list in the ACL6 configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... … |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.19 | Columnacl6NewCfgStatistics | read-write | current | Whether statistics collection for this ACL6 is enabled or not. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.20 | Columnacl6NewCfgAddEgressPortIndex | read-write | current | The port to be added to the specified ACL6 for egress filtering. A value of zero is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.21 | Columnacl6NewCfgRemoveEgressPortIndex | read-write | current | The port to be removed from the specified ACL6. A value of zero is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.22 | Columnacl6NewCfgDelete | read-write | current | This is an action object to delete an ACL6 entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.23 | Columnacl6NewCfgUser | read-write | current | Set user defined priority for this ACL6. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.24 | Columnacl6NewCfgInprofDscp | read-write | current | Set in profile pkts DSCP value. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.25 | Columnacl6NewCfgTos | read-write | current | To enable/disable setting pkts based on TOS bits. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.27 | Columnacl6NewCfgUserEnable | read-write | current | Set update method for this ACL6. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.28 | Columnacl6NewCfgInprofDscpEnable | read-write | current | Whether in profile update DSCP for this ACL6 is enabled or not. Only the value disable(0) can be set, causing the in profile update DSCP to be disabled for thi… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.30 | Columnacl6NewCfgIPv6Reset | read-write | current | This is an action object to reset an ACL IPV6 entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.31 | Columnacl6NewCfgTcpudpReset | read-write | current | This is an action object to reset an ACL6 Tcpudp entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.32 | Columnacl6NewCfgRemarkInprofReset | read-write | current | This is an action object to reset an ACL Remark Inprof entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.33 | Columnacl6NewCfgLog | read-write | current | Whether log for this ACL is enabled or not. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.35 | Columnacl6NewCfgMeterAction | read-write | current | Meter Action for this ACL. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.36 | Columnacl6NewCfgMeterEnable | read-write | current | Meter state for this ACL. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.37 | Columnacl6NewCfgKbitsSec | read-write | current | The commited rate of meter associated with this ACL entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.38 | Columnacl6NewCfgKbitsBurst | read-write | current | The maximum burst size of the meter associated with this ACL entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.39 | Columnacl6NewCfgMeterReset | read-write | current | This is an action object to reset an ACL6 Meter entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.40 | Columnacl6NewCfgOutprofDscp | read-write | current | Set out profile pkts DSCP value. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.41 | Columnacl6NewCfgOutprofDscpEnable | read-write | current | Whether out profile update DSCP for this ACL is enabled or not. Only the value disable(0) can be set, causing the out profile update DSCP to be disabled for th… |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.42 | Columnacl6NewCfgRemarkOutprofReset | read-write | current | This is an action object to reset an ACL Remark Outprof entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.43 | Columnacl6NewCfgAddEgressPortAlias | read-write | current | The port alias to be added to the specified ACL6 for egress filtering. A value of zero is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.44 | Columnacl6NewCfgRemoveEgressPortAlias | read-write | current | The port alias to be removed from the specified ACL6. A value of zero is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.2.1.45 | Columnacl6NewCfgEgressPortAliases | read-only | current | The port alias in the ACL6 configured for egress filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.5.3 | Scalaracl6TableMaxSize | read-only | current | The maximum number of entries in the acl6 config tables. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.6 | NodeaclLog | |||
| 1.3.6.1.4.1.20301.2.7.21.9.1.6.1 | ScalaraclLogCurInterval | read-only | current | The interval secends of displaying Logs. Default is 300s. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.6.2 | ScalaraclLogNewInterval | read-write | current | The interval secends of displaying Logs. Default is 300s. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.6.3 | ScalaraclLogCurRateLimit | read-only | current | The rate limit of ACL Log queue. Default is 10pps. |
| 1.3.6.1.4.1.20301.2.7.21.9.1.6.4 | ScalaraclLogNewRateLimit | read-write | current | The rate limit of ACL Log queue. Default is 10pps. |
| 1.3.6.1.4.1.20301.2.7.21.9.3 | NodevmapConfig | |||
| 1.3.6.1.4.1.20301.2.7.21.9.3.1 | NodevmapList | |||
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1 | TablevmapCurCfgTable | not-accessible | current | The table of current VMAP configuration. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1 | RowvmapCurCfgEntry | not-accessible | current | Current information about a particular VMAP configuration entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.1 | ColumnvmapCurCfgIndex | read-only | current | The index associated with this VMAP entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.2 | ColumnvmapCurCfgFilterAction | read-only | current | The action to be performed on a packet that matches the filter settings of this VMAP entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.3 | ColumnvmapCurCfgFilterActionSetPrio | read-only | current | The value to be used when the action to be performed is setprio for this VMAP entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.4 | ColumnvmapCurCfgEthFmt | read-only | current | The packet ethernet format to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.5 | ColumnvmapCurCfgTagFmt | read-only | current | The packet tag format to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.6 | ColumnvmapCurCfgIPFmt | read-only | current | The packet IP format to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.7 | ColumnvmapCurCfgSrcMACAddress | read-only | current | The source MAC address to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.8 | ColumnvmapCurCfgSrcMACMask | read-only | current | The address mask applied to aclCurCfgSrcMACAddress for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.9 | ColumnvmapCurCfgDstMACAddress | read-only | current | The destination MAC address to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.10 | ColumnvmapCurCfgDstMACMask | read-only | current | The address mask applied to aclCurCfgDstMACAddress for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.11 | ColumnvmapCurCfgEthernetTypeName | read-only | current | The Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be fil… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.12 | ColumnvmapCurCfgEthernetTypeValue | read-only | current | The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthe… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.13 | ColumnvmapCurCfg8021pPriority | read-only | current | The 802.1p priority to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.14 | ColumnvmapCurCfgTypeOfService | read-only | current | The type of service to be filtered. 'none' for not initialised, within the range 0-255 |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.15 | ColumnvmapCurCfgProtocol | read-only | current | The protocol to be filtered. 'none' for not initialised, within the range 0-255 |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.16 | ColumnvmapCurCfgSrcIPAddress | read-only | current | The source IP address to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.17 | ColumnvmapCurCfgSrcIPMask | read-only | current | The address mask applied to aclCurCfgSrcIPAddress for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.18 | ColumnvmapCurCfgDstIPAddress | read-only | current | The destination IP address to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.19 | ColumnvmapCurCfgDstIPMask | read-only | current | The address mask applied to aclCurCfgDstIPAddress for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.20 | ColumnvmapCurCfgSrcPort | read-only | current | The source TCP/UDP port number to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.21 | ColumnvmapCurCfgSrcPortMask | read-only | current | The mask applied to aclCurCfgSrcPort for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.22 | ColumnvmapCurCfgDstPort | read-only | current | The destination TCP/UDP port number to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.23 | ColumnvmapCurCfgDstPortMask | read-only | current | The mask applied to aclCurCfgDstPort for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.24 | ColumnvmapCurCfgTCPFlags | read-only | current | The TCP flags to be filtered. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |_… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.25 | ColumnvmapCurCfgTCPFlagsMask | read-only | current | The TCP flags mask. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________res… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.26 | ColumnvmapCurCfgEgressPorts | read-only | current | The port list in the VMAP configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... … |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.27 | ColumnvmapCurCfgStatistics | read-only | current | Whether statistics collection for this VMAP is enabled or not. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.31 | ColumnvmapCurCfgMeterAction | read-only | current | Meter Action for this VMAP. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.32 | ColumnvmapCurCfgMeterEnable | read-only | current | Meter state for this VMAP. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.33 | ColumnvmapCurCfgKbitsSec | read-only | current | The commited rate of meter associated with this VMAP entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.34 | ColumnvmapCurCfgKbitsBurst | read-only | current | The maxmium burst sizeof meter associated with this VMAP entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.35 | ColumnvmapCurCfgUser | read-only | current | Set user defined priority for this VMAP. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.36 | ColumnvmapCurCfgInprofDscp | read-only | current | Set in profile pkts DSCP value. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.37 | ColumnvmapCurCfgTos | read-only | current | To enable/disable setting pkts based on TOS bits. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.38 | ColumnvmapCurCfgOutprofDscp | read-only | current | Set out profile pkts DSCP value. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.39 | ColumnvmapCurCfgUserEnable | read-only | current | Set update method for this VMAP. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.40 | ColumnvmapCurCfgInprofDscpEnable | read-only | current | Whether in profile update DSCP for this VMAP is enabled or not. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.41 | ColumnvmapCurCfgOutprofDscpEnable | read-only | current | Whether out profile update DSCP for this VMAP is enabled or not. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.51 | ColumnvmapCurCfgMirrorPort | read-only | current | Set port in the VMAP for mirroring. n > 0 - the represented port is configured for mirroring. 0 - the represented port is not configured for mirroring. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.53 | ColumnvmapCurCfgEgressPortAlias | read-only | current | The port alias in the VMAP configured for egress filtering |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.1.1.54 | ColumnvmapCurCfgMirrorPortAlias | read-only | current | Set port in the VMAP for mirroring using it's alias. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2 | TablevmapNewCfgTable | not-accessible | current | The table of new VMAP configuration. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1 | RowvmapNewCfgEntry | not-accessible | current | New information about a particular VMAP configuration. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.1 | ColumnvmapNewCfgIndex | read-only | current | The index associated with this VMAP entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.2 | ColumnvmapNewCfgFilterAction | read-write | current | The action to be performed on a packet that matches the filter settings of this VMAP entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.3 | ColumnvmapNewCfgFilterActionSetPrio | read-write | current | The COS queue to be used when the action for this VMAP entry is set to setprio. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.4 | ColumnvmapNewCfgEthFmt | read-write | current | The packet ethernet format to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.5 | ColumnvmapNewCfgTagFmt | read-write | current | The packet tagging format to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.6 | ColumnvmapNewCfgIPFmt | read-write | current | The packet IP format to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.7 | ColumnvmapNewCfgSrcMACAddress | read-write | current | The source MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcMACMask object, if not yet set, will be automatically se… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.8 | ColumnvmapNewCfgSrcMACMask | read-write | current | The address mask to be applied to aclNewCfgSrcMACAddress for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.9 | ColumnvmapNewCfgDstMACAddress | read-write | current | The destination MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstMACMask object, if not yet set, will be automatical… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.10 | ColumnvmapNewCfgDstMACMask | read-write | current | The address mask to be applied to aclNewCfgDstMACAddress for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.11 | ColumnvmapNewCfgEthernetTypeName | read-write | current | The Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be fil… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.12 | ColumnvmapNewCfgEthernetTypeValue | read-write | current | The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthe… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.13 | ColumnvmapNewCfg8021pPriority | read-write | current | The 802.1p priority to be filtered. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.14 | ColumnvmapNewCfgTypeOfService | read-write | current | The type of service to be filtered. 'none' for not initialised, within the range 0-255 |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.15 | ColumnvmapNewCfgProtocol | read-write | current | The protocol to be filtered. 'none' for not initialised, within the range 0-255 |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.16 | ColumnvmapNewCfgSrcIPAddress | read-write | current | The source IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set, will be automatically set … |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.17 | ColumnvmapNewCfgSrcIPMask | read-write | current | The address mask to be applied to aclNewCfgSrcIPAddress for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.18 | ColumnvmapNewCfgDstIPAddress | read-write | current | The destination IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstIPMask object, if not yet set, will be automatically… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.19 | ColumnvmapNewCfgDstIPMask | read-write | current | The address mask to be applied to aclNewCfgDstIPAddress for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.20 | ColumnvmapNewCfgSrcPort | read-write | current | The source TCP/UDP port number to be filtered. Whenever this object is set if the aclNewCfgSrcPortMask object is not set will be automatically set to 65535 (0x… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.21 | ColumnvmapNewCfgSrcPortMask | read-write | current | The mask to be applied to aclNewCfgSrcPort for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.22 | ColumnvmapNewCfgDstPort | read-write | current | The destination TCP/UDP port number to be filtered. Whenever this object is set the aclNewCfgSrcPortMask object, if not yet set, will be automatically set to 6… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.23 | ColumnvmapNewCfgDstPortMask | read-write | current | The mask to be applied to aclNewCfgDstPort for filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.24 | ColumnvmapNewCfgTCPFlags | read-write | current | The TCP flags to be filtered. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.25 | ColumnvmapNewCfgTCPFlagsMask | read-write | current | The TCP flags mask. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpAC… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.26 | ColumnvmapNewCfgEgressPorts | read-only | current | The port list in the VMAP configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... … |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.27 | ColumnvmapNewCfgStatistics | read-write | current | Whether statistics collection for this VMAP is enabled or not. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.28 | ColumnvmapNewCfgAddEgressPort | read-write | current | The port to be added to the specified VMAP for egress filtering. A value of zero is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.29 | ColumnvmapNewCfgRemoveEgressPort | read-write | current | The port to be removed from the specified VMAP. A value of zero is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.30 | ColumnvmapNewCfgDelete | read-write | current | This is an action object to delete an VMAP entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.31 | ColumnvmapNewCfgMeterAction | read-write | current | Meter Action for this VMAP. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.32 | ColumnvmapNewCfgMeterEnable | read-write | current | Meter state for this VMAP. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.33 | ColumnvmapNewCfgKbitsSec | read-write | current | The commited rate of meter associated with this VMAP entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.34 | ColumnvmapNewCfgKbitsBurst | read-write | current | The maximum burst size of the meter associated with this VMAP entry. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.35 | ColumnvmapNewCfgUser | read-write | current | Set user defined priority for this VMAP. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.36 | ColumnvmapNewCfgInprofDscp | read-write | current | Set in profile pkts DSCP value. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.37 | ColumnvmapNewCfgTos | read-write | current | To enable/disable setting pkts based on TOS bits. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.38 | ColumnvmapNewCfgOutprofDscp | read-write | current | Set out profile pkts DSCP value. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.39 | ColumnvmapNewCfgUserEnable | read-write | current | Set update method for this VMAP. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.40 | ColumnvmapNewCfgInprofDscpEnable | read-write | current | Whether in profile update DSCP for this VMAP is enabled or not. Only the value disable(0) can be set, causing the in profile update DSCP to be disabled for thi… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.41 | ColumnvmapNewCfgOutprofDscpEnable | read-write | current | Whether out profile update DSCP for this VMAP is enabled or not. Only the value disable(0) can be set, causing the out profile update DSCP to be disabled for t… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.42 | ColumnvmapNewCfgReset | read-write | current | This is an action object to reset an VMAP entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.43 | ColumnvmapNewCfgEthernetReset | read-write | current | This is an action object to reset an VMAP Ethernet entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.44 | ColumnvmapNewCfgIpv4Reset | read-write | current | This is an action object to reset an VMAP IPV4 entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.45 | ColumnvmapNewCfgTcpudpReset | read-write | current | This is an action object to reset an VMAP Tcpudp entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.46 | ColumnvmapNewCfgMeterReset | read-write | current | This is an action object to reset an VMAP Meter entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.47 | ColumnvmapNewCfgRemarkReset | read-write | current | This is an action object to reset an VMAP Remark entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.48 | ColumnvmapNewCfgRemarkInprofReset | read-write | current | This is an action object to reset an VMAP Remark Inprof entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.49 | ColumnvmapNewCfgRemarkOutprofReset | read-write | current | This is an action object to reset an VMAP Remark Outprof entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.50 | ColumnvmapNewCfgPktfmtReset | read-write | current | This is an action object to reset an VMAP Pktfmt entry. A value of other(1) is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.51 | ColumnvmapNewCfgMirrorPort | read-write | current | Set port in the VMAP for mirroring. n > 0 - the represented port is configured for mirroring. 0 - the represented port is not configured for mirroring. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.53 | ColumnvmapNewCfgEgressPortAliases | read-only | current | The port alias in the VMAP configured for egress filtering. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.54 | ColumnvmapNewCfgMirrorPortAlias | read-write | current | Set port in the VMAP for mirroring using it's alias. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.55 | ColumnvmapNewCfgAddEgressPortAlias | read-write | current | The port to be added using it's alias to the specified VMAP for egress filtering. A value of zero is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.1.2.1.56 | ColumnvmapNewCfgRemoveEgressPortAlias | read-write | current | The port to be removed using it's alias from the specified VMAP. A value of zero is always returned when this object is read. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2 | NodevmapCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1 | NodevmapVlanCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1 | NodevmapVlanCfgNonServerPorts | |||
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.1 | TablevmapVlanCurCfgNonServerPortsTable | not-accessible | current | The table of the current configuration of vmaps for the non-server ports of vlans. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.1.1 | RowvmapVlanCurCfgNonServerPortsTableEntry | not-accessible | current | A row in the table of current configuration of vmaps for the non-server ports of vlans. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.1.1.1 | ColumnvmapVlanCurCfgNonServerPortsVlanIdx | read-only | current | The vlan id in the table of configured vmaps for the non-server ports of vlan |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.1.1.2 | ColumnvmapVlanCurCfgNonServerPortsVmapBitmap | read-only | current | The bitmap of vmaps configured for the non-server ports of the vlan given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OC… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.2 | TablevmapVlanNewCfgNonServerPortsTable | not-accessible | current | The table of the new configuration of vmaps for non-server ports of vlans. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.2.1 | RowvmapVlanNewCfgNonServerPortsTableEntry | not-accessible | current | A row in the table of new configuration of vmaps for the non-server ports of vlans. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.2.1.1 | ColumnvmapVlanNewCfgNonServerPortsVlanIdx | read-only | current | The vlan id in the table of configured vmaps for the non-server ports of vlan |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.2.1.2 | ColumnvmapVlanNewCfgNonServerPortsVmapBitmap | read-only | current | The bitmap of vmaps configured for the non-server ports of the vlan given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OC… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.2.1.3 | ColumnvmapVlanNewCfgNonServerPortsAddVmap | read-write | current | Add a new vmap to the non-server ports of the vlan |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.1.2.1.4 | ColumnvmapVlanNewCfgNonServerPortsRemVmap | read-write | current | Remove a vmap from the non-server ports of the vlan |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2 | NodevmapVlanCfgServerPorts | |||
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.1 | TablevmapVlanCurCfgServerPortsTable | not-accessible | current | The table of the current configuration of vmaps for server ports of vlans. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.1.1 | RowvmapVlanCurCfgServerPortsTableEntry | not-accessible | current | A row in the table of current configuration of vmaps for the server ports of vlans. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.1.1.1 | ColumnvmapVlanCurCfgServerPortsVlanIdx | read-only | current | The vlan id in the table of configured vmaps for the server ports of vlan |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.1.1.2 | ColumnvmapVlanCurCfgServerPortsVmapBitmap | read-only | current | The bitmap of vmaps configured for the server ports of the vlan given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OCTET … |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.2 | TablevmapVlanNewCfgServerPortsTable | not-accessible | current | The table of the new configuration of vmaps for server ports of vlans. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.2.1 | RowvmapVlanNewCfgServerPortsTableEntry | not-accessible | current | A row in the table of new configuration of vmaps for the server ports of vlans. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.2.1.1 | ColumnvmapVlanNewCfgServerPortsVlanIdx | read-only | current | The vlan id in the table of configured vmaps for the server ports of vlan |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.2.1.2 | ColumnvmapVlanNewCfgServerPortsVmapBitmap | read-only | current | The bitmap of vmaps configured for the server ports of the vlan given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OCTET … |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.2.1.3 | ColumnvmapVlanNewCfgServerPortsAddVmap | read-write | current | Add a new vmap to the server ports of the vlan |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.2.2.1.4 | ColumnvmapVlanNewCfgServerPortsRemVmap | read-write | current | Remove a vmap from the server ports of the vlan |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3 | NodevmapVlanCfgAllPorts | |||
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.1 | TablevmapVlanCurCfgAllPortsTable | not-accessible | current | The table of the current configuration of vmaps for all ports of vlans. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.1.1 | RowvmapVlanCurCfgAllPortsTableEntry | not-accessible | current | A row in the table of current configuration of vmaps for all ports of vlans. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.1.1.1 | ColumnvmapVlanCurCfgAllPortsVlanIdx | read-only | current | The vlan id in the table of configured vmaps for all ports of vlan |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.1.1.2 | ColumnvmapVlanCurCfgAllPortsVmapBitmap | read-only | current | The bitmap of vmaps configured for the internal ports of the vlan given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OCTE… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.2 | TablevmapVlanNewCfgAllPortsTable | not-accessible | current | The table of the new configuration of vmaps for all ports of vlans. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.2.1 | RowvmapVlanNewCfgAllPortsTableEntry | not-accessible | current | A row in the table of new configuration of vmaps for all ports of vlans. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.2.1.1 | ColumnvmapVlanNewCfgAllPortsVlanIdx | read-only | current | The vlan id in the table of configured vmaps for all ports of vlan |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.2.1.2 | ColumnvmapVlanNewCfgAllPortsVmapBitmap | read-only | current | The bitmap of vmaps configured for the internal ports of the vlan given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OCTE… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.2.1.3 | ColumnvmapVlanNewCfgAllPortsAddVmap | read-write | current | Add a new vmap to all ports of the vlan |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.1.3.2.1.4 | ColumnvmapVlanNewCfgAllPortsRemVmap | read-write | current | Remove a vmap from all vlan ports |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2 | NodevmapGroupCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1 | NodevmapGroupCfgNonServerPorts | |||
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.1 | TablevmapGroupCurCfgNonServerPortsTable | not-accessible | current | The table of the current configuration of vmaps for non-server ports of vm groups. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.1.1 | RowvmapGroupCurCfgNonServerPortsTableEntry | not-accessible | current | A row in the table of current configuration of vmaps for the non-server ports of vm groups. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.1.1.1 | ColumnvmapGroupCurCfgNonServerPortsGroupIdx | read-only | current | The vm group id in the table of configured vmaps for the non-server ports of vm group |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.1.1.2 | ColumnvmapGroupCurCfgNonServerPortsVmapBitmap | read-only | current | The bitmap of vmaps configured for the non-server ports of the vm group given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET … |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.2 | TablevmapGroupNewCfgNonServerPortsTable | not-accessible | current | The table of the new configuration of vmaps for non-server ports of vm groups. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.2.1 | RowvmapGroupNewCfgNonServerPortsTableEntry | not-accessible | current | A row in the table of new configuration of vmaps for the non-server ports of vm groups. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.2.1.1 | ColumnvmapGroupNewCfgNonServerPortsGroupIdx | read-only | current | The vm group id in the table of configured vmaps for the non-server ports of vm group |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.2.1.2 | ColumnvmapGroupNewCfgNonServerPortsVmapBitmap | read-only | current | The bitmap of vmaps configured for the non-server ports of the vm group given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET … |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.2.1.3 | ColumnvmapGroupNewCfgNonServerPortsAddVmap | read-write | current | Add a new vmap to the non-server ports of the vm group |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.1.2.1.4 | ColumnvmapGroupNewCfgNonServerPortsRemVmap | read-write | current | Remove a vmap from the non-server ports of the vm group |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2 | NodevmapGroupCfgServerPorts | |||
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.1 | TablevmapGroupCurCfgServerPortsTable | not-accessible | current | The table of the current configuration of vmaps for server ports of vm groups. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.1.1 | RowvmapGroupCurCfgServerPortsTableEntry | not-accessible | current | A row in the table of current configuration of vmaps for the server ports of vm groups. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.1.1.1 | ColumnvmapGroupCurCfgServerPortsGroupIdx | read-only | current | The vm group id in the table of configured vmaps for the server ports of vm group |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.1.1.2 | ColumnvmapGroupCurCfgServerPortsVmapBitmap | read-only | current | The bitmap of vmaps configured for the server ports of the vm group given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OC… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.2 | TablevmapGroupNewCfgServerPortsTable | not-accessible | current | The table of the new configuration of vmaps for server ports of vm groups. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.2.1 | RowvmapGroupNewCfgServerPortsTableEntry | not-accessible | current | A row in the table of new configuration of vmaps for the server ports of vm groups. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.2.1.1 | ColumnvmapGroupNewCfgServerPortsGroupIdx | read-only | current | The vm group id in the table of configured vmaps for the server ports of vm group |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.2.1.2 | ColumnvmapGroupNewCfgServerPortsVmapBitmap | read-only | current | The bitmap of vmaps configured for the server ports of the vm group given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 OC… |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.2.1.3 | ColumnvmapGroupNewCfgServerPortsAddVmap | read-write | current | Add a new vmap to the server ports of the vm group |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.2.2.1.4 | ColumnvmapGroupNewCfgServerPortsRemVmap | read-write | current | Remove a vmap from the server ports of the vm group |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3 | NodevmapGroupCfgAllPorts | |||
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.1 | TablevmapGroupCurCfgAllPortsTable | not-accessible | current | The table of the current configuration of vmaps for all ports of vm groups. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.1.1 | RowvmapGroupCurCfgAllPortsTableEntry | not-accessible | current | A row in the table of current configuration of vmaps for all ports of vm groups. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.1.1.1 | ColumnvmapGroupCurCfgAllPortsGroupIdx | read-only | current | The vm group id in the table of configured vmaps for all ports of vm group |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.1.1.2 | ColumnvmapGroupCurCfgAllPortsVmapBitmap | read-only | current | The bitmap of vmaps configured for the internal ports of the vm group given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 … |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.2 | TablevmapGroupNewCfgAllPortsTable | not-accessible | current | The table of the new configuration of vmaps for all ports of vm groups. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.2.1 | RowvmapGroupNewCfgAllPortsTableEntry | not-accessible | current | A row in the table of new configuration of vmaps for all ports of vm groups. |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.2.1.1 | ColumnvmapGroupNewCfgAllPortsGroupIdx | read-only | current | The vm group id in the table of configured vmaps for all ports of vm group |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.2.1.2 | ColumnvmapGroupNewCfgAllPortsVmapBitmap | read-only | current | The bitmap of vmaps configured for the internal ports of the vm group given as arguments. The vmaps are presented in bitmap format in receiving order: OCTET 1 … |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.2.1.3 | ColumnvmapGroupNewCfgAllPortsAddVmap | read-write | current | Add a new vmap to all ports of the vm group |
| 1.3.6.1.4.1.20301.2.7.21.9.3.2.2.3.2.1.4 | ColumnvmapGroupNewCfgAllPortsRemVmap | read-write | current | Remove a vmap from all vm group ports |
| 1.3.6.1.4.1.20301.2.7.21.12 | Nodefabric | |||
| 1.3.6.1.4.1.20301.2.7.21.12.1 | NodefabricConfig | |||
| 1.3.6.1.4.1.20301.2.7.21.12.1.1 | NodeswitchNumCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.12.1.1.1 | TableswitchNumCurCfgTable | not-accessible | current | The table of the current configuration block for the switch numbers |
| 1.3.6.1.4.1.20301.2.7.21.12.1.1.1.1 | RowswitchNumCurCfgEntry | not-accessible | current | A row in the table of the current configuration block for the switch numbers |
| 1.3.6.1.4.1.20301.2.7.21.12.1.1.1.1.1 | ColumnswitchNumberCurCfg | read-only | current | The configured switch number. |
| 1.3.6.1.4.1.20301.2.7.21.12.1.1.1.1.2 | ColumnswitchUUIDCurCfg | read-only | current | The UUID of the chassis the embedded switch is in. An empty string is returned for Top Of Rack switches. |
| 1.3.6.1.4.1.20301.2.7.21.12.1.1.1.1.3 | ColumnswitchBayCurCfg | read-only | current | The chassis bay number the embedded switch is in. 0 is returned for Top Of Rack switches. |
| 1.3.6.1.4.1.20301.2.7.21.12.1.1.1.1.4 | ColumnswitchMACCurCfg | read-only | current | The MAC address for the switch number. |
| 1.3.6.1.4.1.20301.2.7.21.12.1.1.1.1.5 | ColumnswitchDescrCurCfg | read-only | current | A user-defined description for the switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.1.1.2 | TableswitchNumNewCfgTable | not-accessible | current | The table of the new configuration block for the switch numbers |
| 1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1 | RowswitchNumNewCfgEntry | not-accessible | current | A row in the table of the new configuration block for the switch numbers |
| 1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.1 | ColumnswitchNumberNewCfg | read-only | current | The configured switch number. |
| 1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.2 | ColumnswitchUUIDNewCfg | read-write | current | The UUID of the chassis the embedded switch is in. An empty string is returned for Top Of Rack switches. |
| 1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.3 | ColumnswitchBayNewCfg | read-write | current | The chassis bay number the embedded switch is in. 0 is returned for Top Of Rack switches. |
| 1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.4 | ColumnswitchBindToAttachedNewCfg | read-write | current | When written, binds the switch number entry to an attached switch; when read, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.5 | ColumnswitchDeleteNewCfg | read-write | current | When setting delete(1), the switch number entry is deleted; when read, other(2) is returned. |
| 1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.6 | ColumnswitchMACNewCfg | read-write | current | The MAC address for the switch number. |
| 1.3.6.1.4.1.20301.2.7.21.12.1.1.2.1.7 | ColumnswitchDescrNewCfg | read-write | current | A user-defined description for the switch |
| 1.3.6.1.4.1.20301.2.7.21.12.1.1.3 | ScalarfabricBindAll | read-write | current | If this is set to bind(2) the binding of all attached members will be performed at the next apply. other(1) is returned when the object is read. |
| 1.3.6.1.4.1.20301.2.7.21.12.1.4 | NodefabricNameCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.12.1.4.1 | ScalarfabricNameCurCfg | read-only | current | The fabric name. |
| 1.3.6.1.4.1.20301.2.7.21.12.1.4.2 | ScalarfabricNameNewCfg | read-write | current | The fabric name. |
| 1.3.6.1.4.1.20301.2.7.21.12.3 | NodefabricInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.12.3.1 | ScalarfabricInfoState | read-only | current | Query if fabric is enabled or not |
| 1.3.6.1.4.1.20301.2.7.21.12.3.2 | ScalarfabricInfoNoUnits | read-only | current | The number of units in the fabric. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3 | NodeswitchInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.1 | NodemasterInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.1.1 | ScalarmasterSwitchNumber | read-only | current | The csnum (configured switch number) of the master. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.1.2 | ScalarmasterMAC | read-only | current | The MAC address of the master switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.2 | NodebackupInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.2.1 | ScalarbackupSwitchNumber | read-only | current | The csnum (configured switch number) of the backup. If the backup switch is in the reset process or is absent then we display the information from config. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.2.2 | ScalarbackupMAC | read-only | current | The MAC address of the backup switch. If the backup switch is in the reset process or is absent then we display the information from config. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.2.5 | ScalarbackupPresent | read-only | current | Flag to indicate if backup switch is present. - absent - the backup switch is configured but it is not present(reboot or absent), - present - the backup switch… |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.3 | TableconfiguredSwitchesTable | not-accessible | current | The table of the configured switches in fabric |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1 | RowconfiguredSwitchesEntry | not-accessible | current | Information about a configured switch |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1.1 | ColumnconfSwitchNumber | read-only | current | The number of the configured switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1.2 | ColumnconfSwitchUUID | read-only | current | The UUID of the configured switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1.3 | ColumnconfSwitchBay | read-only | current | The number of the bay where the configured switch is located; 0 if the configured switch is not attached to the fabric. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1.4 | ColumnconfSwitchMAC | read-only | current | The MAC of the configured switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1.5 | ColumnconfSwitchAttachedSwNumber | read-only | current | The asnum (attached switch number) of the configured switch; 0 if the switch is not attached to the fabric |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.3.1.6 | ColumnconfSwitchMode | read-only | current | The fabric mode for the switch |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.4 | TableattachedSwitchesTable | not-accessible | current | The table of the attached switches in fabric |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1 | RowattachedSwitchesEntry | not-accessible | current | Information about an attached switch |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.1 | ColumnattachedSwitchNumber | read-only | current | The number of the attached switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.2 | ColumnattachedSwitchUUID | read-only | current | The UUID of the attached switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.3 | ColumnattachedSwitchBay | read-only | current | The number of the bay where the attached switch is located. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.4 | ColumnattachedSwitchMAC | read-only | current | The MAC of the attached switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.5 | ColumnattachedSwitchConfSwNumber | read-only | current | The csnum (configured switch number) of the attached switch; if the switch is not configured, 0 is returned. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.6 | ColumnattachedSwitchState | read-only | current | The state of the attached switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.7 | ColumnattachedSwitchImageSlot | read-only | current | The software image slot used at the current boot by the attached switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.8 | ColumnattachedSwitchImageVersion | read-only | current | The software version running on the attached switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.9 | ColumnattachedSwitchSerialNum | read-only | current | The serial number of the attached switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.10 | ColumnattachedSwitchMode | read-only | current | The fabric mode for the switch |
| 1.3.6.1.4.1.20301.2.7.21.12.3.3.4.1.11 | ColumnattachedSwitchType | read-only | current | The type of the attached switch |
| 1.3.6.1.4.1.20301.2.7.21.12.3.4 | TablelinkInfoTable | not-accessible | current | The table of the fabric links |
| 1.3.6.1.4.1.20301.2.7.21.12.3.4.1 | RowfabricLinkInfoEntry | not-accessible | current | Information about a fabric link |
| 1.3.6.1.4.1.20301.2.7.21.12.3.4.1.1 | ColumnfabricLinkAttachedSwNum | read-only | current | The number of the attached switch to which the fabric port belongs. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.4.1.2 | ColumnfabricLinkSwitchPort | read-only | current | The switch port number of the fabric port. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.4.1.3 | ColumnfabricLinkMAC | read-only | current | The MAC of the fabric port. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.4.1.4 | ColumnfabricLinkConfSwNum | read-only | current | The csnum (configured switch number) of the switch to which the fabric port belongs; 0 if the switch is not configured. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.4.1.5 | ColumnfabricLinkState | read-only | current | The state of the fabric link. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.4.1.6 | ColumnfabricPortTrunkID | read-only | current | The identifier of the trunk to which the fabric port belongs. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.4.1.7 | ColumnfabricPortPeerAttachedSwNum | read-only | current | The number of the attached switch (asnum) to which the fabric port is connected. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.4.1.8 | ColumnfabricPortPeerPortIndex | read-only | current | The number of the fabric port which is at the other end of the link. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.4.1.9 | ColumnfabricPortPeerTrunk | read-only | current | The identifier of the fabric trunk which is at the other end of the link. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.4.1.10 | ColumnfabricLinkSwitchPortAlias | read-only | current | The switch port alias of the fabric port. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.4.1.11 | ColumnfabricPortPeerPortAlias | read-only | current | The alias of the fabric port which is at the other end of the link. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.7 | NodemgmtInterfaceInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.12.3.7.5 | NodemgmtInfoFloatingIP | |||
| 1.3.6.1.4.1.20301.2.7.21.12.3.7.5.1 | ScalarmgmtFloatingIpv4Addr | read-only | current | The Floating IPv4 management IP address of the Master Switch Management IP Interface. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.7.5.2 | ScalarmgmtFloatingIPv4Mask | read-only | current | The Floating subnet mask of Master Switch Management IP Interface. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.7.5.3 | ScalarmgmtFloatingIpv6Addr | read-only | current | The Floating IPv6 management IP address of the Master Switch Management IP Interface. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.7.5.4 | ScalarmgmtFloatingIPv6Mask | read-only | current | The Floating IPv6 Prefix length of Master Switch Management IP Interface. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.8 | TablepushStatusInfoTable | not-accessible | current | The table for the status of the transfers from the master to the attached switches |
| 1.3.6.1.4.1.20301.2.7.21.12.3.8.1 | RowpushStatusInfoEntry | not-accessible | current | Information about the transfers from the master to an attached switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.8.1.1 | ColumnpushInfoAttachedSwNum | read-only | current | The number of the attached switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.8.1.2 | ColumnpushInfoImage1 | read-only | current | The status of the transfer of image 1 from the master to the attached switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.8.1.3 | ColumnpushInfoImage2 | read-only | current | The status of the transfer of image 2 from the master to the attached switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.8.1.4 | ColumnpushInfoBootImage | read-only | current | The status of the transfer of the boot image from the master to the attached switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.8.1.5 | ColumnpushInfoCfgFile | read-only | current | The status of the transfer of the config file from the master to the attached switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.9 | TablefabricTrunkTable | not-accessible | current | The table for the fabric trunks. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.9.1 | RowfabricTrunkEntry | not-accessible | current | Information about fabric (fabric) trunk. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.9.1.1 | ColumnfabricTrunkID | read-only | current | The identifier of the fabric trunk. The format used is TrunkxToy where x is the attached switch number of the source switch and y is the attached switch number… |
| 1.3.6.1.4.1.20301.2.7.21.12.3.9.1.2 | ColumnfabricTrunkAttachedSwNum | read-only | current | The attached switch number (asnum) of the switch to which the fabric trunk belongs. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.9.1.3 | ColumnfabricTrunkPorts | read-only | current | The bitmap of the local ports which form the fabric trunk. The ports are presented in bitmap format in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx… |
| 1.3.6.1.4.1.20301.2.7.21.12.3.9.1.4 | ColumnfabricTrunkPeerAttachedSwNum | read-only | current | The attached switch number (asnum) of the switch to which the fabric trunk is connected. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.9.1.5 | ColumnfabricTrunkPeerID | read-only | current | The identifier of the fabric trunk to which this fabric trunk is connected to. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.11 | TablefabricPathTable | not-accessible | current | The table to specify the path (the fabric trunks) used by packets going from a switch of the fabric to another switch of the #STACK_DESC_OPT#. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.11.1 | RowfabricPathEntry | not-accessible | current | Information about the fabric trunk to use by a switch for the traffic which should go to a particular switch of the fabric |
| 1.3.6.1.4.1.20301.2.7.21.12.3.11.1.1 | ColumnfabricConfiguredSwNumFrom | read-only | current | The configured switch number (csnum) of the source switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.11.1.2 | ColumnfabricConfiguredSwNumTo | read-only | current | The configured switch number (csnum) of the destination switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.11.1.3 | ColumnfabricTrunkIDThrough | read-only | current | The identifier of a fabric trunk from the source switch that is used to send the traffic to the destination switch. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.12 | TableportNumberTable | not-accessible | current | The table to give the system port number used in the user interfaces for a port specified by the configured switch number and the local port number. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.12.1 | RowportNumberEntry | not-accessible | current | The mapping between the (switch number, local port number) and user interface system port number. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.12.1.1 | ColumnconfiguredSwNum | read-only | current | The configured switch number (csnum) of the switch to which the port belongs. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.12.1.2 | ColumnlocalPortNum | read-only | current | The local port number: the number assigned to the port with respect to the switch to which it belongs. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.12.1.3 | ColumnsysPortNum | read-only | current | The system port number: the number assigned to the port with respect to the whole fabric. This is the usual number used as index in the port related tables. |
| 1.3.6.1.4.1.20301.2.7.21.12.3.12.1.4 | ColumnlocalPortAlias | read-only | current | The local port alias: the alias assigned to the port with respect to the switch to which it belongs. |
| 1.3.6.1.4.1.20301.2.7.21.12.5 | NodefabricBoot | |||
| 1.3.6.1.4.1.20301.2.7.21.12.5.1 | NodefabricBootCurrent | |||
| 1.3.6.1.4.1.20301.2.7.21.12.5.1.1 | TablefabricBootCurTable | not-accessible | current | The table of currently booted fabric settings for the switches of the fabric. |
| 1.3.6.1.4.1.20301.2.7.21.12.5.1.1.1 | RowfabricBootCurTableEntry | not-accessible | current | Currently booted fabric settings for a switch of the fabric. |
| 1.3.6.1.4.1.20301.2.7.21.12.5.1.1.1.1 | ColumnfabricBootCurSwitchNumber | read-only | current | The attached switch number. |
| 1.3.6.1.4.1.20301.2.7.21.12.5.1.1.1.2 | ColumnfabricBootCurMode | read-only | current | The current (booted) fabric mode of the switch; when the switch is standalone the notAvailable(1) value is always returned |
| 1.3.6.1.4.1.20301.2.7.21.12.5.1.1.1.3 | ColumnfabricBootCurTrunkPorts | read-only | current | The current (booted) external ports (10G or higher) which form the Fabric Trunk The ports are presented in bitmap format in receiving order: OCTET 1 OCTET 2 ..… |
| 1.3.6.1.4.1.20301.2.7.21.12.5.1.1.1.4 | ColumnfabricBootCurVlan | read-only | current | The current (booted) fabric VLAN number for control communication |
| 1.3.6.1.4.1.20301.2.7.21.12.5.1.1.1.6 | ColumnfabricBootCurSIFabricDomain | read-only | current | Set the SI Fabric domain number |
| 1.3.6.1.4.1.20301.2.7.21.12.5.2 | NodefabricBootSaved | |||
| 1.3.6.1.4.1.20301.2.7.21.12.5.2.1 | TablefabricBootSavedTable | not-accessible | current | The table of the current fabric settings saved for the next reboot (for all switches in the fabric) . |
| 1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1 | RowfabricBootSavedTableEntry | not-accessible | current | Current fabric settings saved for the next reboot for a switch of the fabric. |
| 1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.1 | ColumnfabricBootSavedSwitchNumber | read-only | current | The attached switch number. |
| 1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.2 | ColumnfabricBootSavedMode | read-write | current | Set the fabric mode of the switch after the next reset |
| 1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.3 | ColumnfabricBootSavedTrunkPortIndexAdd | read-write | current | When set, add an external port (10G or higher) to the Fabric Trunk; when read, the value 0 is returned |
| 1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.4 | ColumnfabricBootSavedTrunkPortIndexRem | read-write | current | When set, remove an external port (10G or higher) from the Fabric Trunk; when read, the value 0 is returned |
| 1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.5 | ColumnfabricBootSavedTrunkPorts | read-only | current | The external ports (10G or higher) which will form the Fabric Trunk after the next reset of the switch The ports are presented in bitmap format in receiving or… |
| 1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.6 | ColumnfabricBootSavedVlan | read-write | current | The saved fabric VLAN number for control communication (it will become effective after the next reset) |
| 1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.7 | ColumnfabricBootSavedClear | read-write | current | When clear(1) is written, then the saved fabric parameters are set to the factory default values; when read, other(2) is always returned |
| 1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.9 | ColumnfabricBootSavedSIFabricDomain | read-write | current | Set the SI Fabric domain number |
| 1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.10 | ColumnfabricBootSavedTrunkPortAliasAdd | read-write | current | When set, add an external port alias (10G or higher) to the Fabric Trunk; when read, the value 0 is returned |
| 1.3.6.1.4.1.20301.2.7.21.12.5.2.1.1.11 | ColumnfabricBootSavedTrunkPortAliasRem | read-write | current | When set, remove an external port alias (10G or higher) from the Fabric Trunk; when read, the value 0 is returned |
| 1.3.6.1.4.1.20301.2.7.21.12.5.3 | TablefabricBootSwitchTable | not-accessible | current | The table for resetting the switches in the fabric. Contains only the entries for configured and attached switches, indexed by the configured switch number |
| 1.3.6.1.4.1.20301.2.7.21.12.5.3.1 | RowfabricBootSwitchEntry | not-accessible | current | A row in the table for resetting the switches in the fabric |
| 1.3.6.1.4.1.20301.2.7.21.12.5.3.1.1 | ColumnfabricBootSwitchNum | read-only | current | The configured switch number. |
| 1.3.6.1.4.1.20301.2.7.21.12.5.3.1.2 | ColumnfabricBootSwitchReset | read-write | current | This is an action object to reboot the selected switch. other(1) is returned always when read. |
| 1.3.6.1.4.1.20301.2.7.21.13 | Nodecee | |||
| 1.3.6.1.4.1.20301.2.7.21.13.1 | NodeceeConfig | |||
| 1.3.6.1.4.1.20301.2.7.21.13.1.1 | ScalarceeCurCfgState | read-only | current | CEE is currently on or off. |
| 1.3.6.1.4.1.20301.2.7.21.13.1.2 | ScalarceeNewCfgState | read-create | current | Turn CEE on or off. |
| 1.3.6.1.4.1.20301.2.7.21.13.1.3 | TableetsCurCfgMcPGTable | not-accessible | current | The table of Multicast Priority Allocation |
| 1.3.6.1.4.1.20301.2.7.21.13.1.3.1 | RowetsCurCfgMcPGEntry | not-accessible | current | Information about Multicast Priority Allocation |
| 1.3.6.1.4.1.20301.2.7.21.13.1.3.1.1 | ColumnetsCurCfgMcPrioId | read-only | current | The priority which is to be assigned to a multicast priority group |
| 1.3.6.1.4.1.20301.2.7.21.13.1.3.1.2 | ColumnetsCurCfgMcPGId | read-only | current | Multicast priority group number |
| 1.3.6.1.4.1.20301.2.7.21.13.1.4 | TableetsNewCfgMcPGTable | not-accessible | current | The table of Multicast Priority Allocation |
| 1.3.6.1.4.1.20301.2.7.21.13.1.4.1 | RowetsNewCfgMcPGEntry | not-accessible | current | Information about Multicast Priority Allocation |
| 1.3.6.1.4.1.20301.2.7.21.13.1.4.1.1 | ColumnetsNewCfgMcPrioId | read-only | current | The priority which is to be assigned to a multicast priority group |
| 1.3.6.1.4.1.20301.2.7.21.13.1.4.1.2 | ColumnetsNewCfgMcPGId | read-write | current | Multicast priority group Number |
| 1.3.6.1.4.1.20301.2.7.21.13.1.5 | TableetsCurCfgMcPgBwTable | not-accessible | current | The table of Multicast Bandwidth Allocation |
| 1.3.6.1.4.1.20301.2.7.21.13.1.5.1 | RowetsCurCfgMcPgBwEntry | not-accessible | current | Information about Multicast Bandwidth Allocation |
| 1.3.6.1.4.1.20301.2.7.21.13.1.5.1.1 | ColumnetsCurCfgMcPgBwId | read-only | current | The multicast priority group for which bandwidth is allocated in this table. |
| 1.3.6.1.4.1.20301.2.7.21.13.1.5.1.2 | ColumnetsCurCfgMcPgBw | read-only | current | Multicast priority group's bandwidth |
| 1.3.6.1.4.1.20301.2.7.21.13.1.5.1.3 | ColumnetsCurCfgMcPgDesc | read-only | current | Multicast priority group's description |
| 1.3.6.1.4.1.20301.2.7.21.13.1.6 | TableetsNewCfgMcPgBwTable | not-accessible | current | The table of Multicast Bandwidth Allocation |
| 1.3.6.1.4.1.20301.2.7.21.13.1.6.1 | RowetsNewCfgMcPgBwEntry | not-accessible | current | Information about Multicast Bandwidth Allocation |
| 1.3.6.1.4.1.20301.2.7.21.13.1.6.1.1 | ColumnetsNewCfgMcPgBwId | read-only | current | The multicast priority group for which bandwidth is allocated in this table. |
| 1.3.6.1.4.1.20301.2.7.21.13.1.6.1.2 | ColumnetsNewCfgMcPgBw | read-write | current | Multicast priority group's bandwidth |
| 1.3.6.1.4.1.20301.2.7.21.13.1.6.1.3 | ColumnetsNewCfgMcPgDesc | read-write | current | Multicast priority group's description |
| 1.3.6.1.4.1.20301.2.7.21.14 | Nodefcoe | |||
| 1.3.6.1.4.1.20301.2.7.21.14.1 | NodefcoeConfig | |||
| 1.3.6.1.4.1.20301.2.7.21.14.1.3 | NodefipsCfg | |||
| 1.3.6.1.4.1.20301.2.7.21.14.1.3.1 | ScalarfipsCurCfgState | read-only | current | FIP snooping is currently on or off. |
| 1.3.6.1.4.1.20301.2.7.21.14.1.3.2 | ScalarfipsNewCfgState | read-create | current | Turn FIP snooping on or off. |
| 1.3.6.1.4.1.20301.2.7.21.14.1.3.3 | ScalarfipsCurAclTimeout | read-only | current | The removal of acls when FCF and FCOE connections timed out is enabled or disabled. |
| 1.3.6.1.4.1.20301.2.7.21.14.1.3.4 | ScalarfipsNewAclTimeout | read-create | current | Enable or disable the removal of acls when FCF and FCOE connections timed out. |
| 1.3.6.1.4.1.20301.2.7.21.14.1.3.7 | TablefipsPortCurCfgTable | not-accessible | current | The table of FIP Snooping port current config. |
| 1.3.6.1.4.1.20301.2.7.21.14.1.3.7.1 | RowfipsPortCurCfgEntry | not-accessible | current | FIP Config for a particular port. |
| 1.3.6.1.4.1.20301.2.7.21.14.1.3.7.1.1 | ColumnfipsPortCurCfgIndex | read-only | current | The port number |
| 1.3.6.1.4.1.20301.2.7.21.14.1.3.7.1.2 | ColumnfipsPortCurCfgFcfMode | read-only | current | Weither the port is set to have FCF auto detection, on, or off. |
| 1.3.6.1.4.1.20301.2.7.21.14.1.3.7.1.3 | ColumnfipsPortCurCfgFipsEna | read-only | current | FIP snooping enabled or disabled on this port. |
| 1.3.6.1.4.1.20301.2.7.21.14.1.3.8 | TablefipsPortNewCfgTable | not-accessible | current | The table of FIP Snooping port new config. |
| 1.3.6.1.4.1.20301.2.7.21.14.1.3.8.1 | RowfipsPortNewCfgEntry | not-accessible | current | FIP Config for a particular port. |
| 1.3.6.1.4.1.20301.2.7.21.14.1.3.8.1.1 | ColumnfipsPortNewCfgIndex | read-only | current | The port number |
| 1.3.6.1.4.1.20301.2.7.21.14.1.3.8.1.2 | ColumnfipsPortNewCfgFcfMode | read-create | current | Set this port to have FCF on, off, or auto detection. |
| 1.3.6.1.4.1.20301.2.7.21.14.1.3.8.1.3 | ColumnfipsPortNewCfgFipsEna | read-create | current | Enable or disable FIP snooping on this port. |
| 1.3.6.1.4.1.20301.2.7.21.14.2 | NodefcoeStats | |||
| 1.3.6.1.4.1.20301.2.7.21.14.2.1 | TablefcoeStatsTable | not-accessible | current | The table of fcoe statistics per switch unit. |
| 1.3.6.1.4.1.20301.2.7.21.14.2.1.1 | RowfcoeStatsEntry | not-accessible | current | A switch unit. |
| 1.3.6.1.4.1.20301.2.7.21.14.2.1.1.1 | ColumnfcoeStatsIndex | read-only | current | The switch index for fips statistics |
| 1.3.6.1.4.1.20301.2.7.21.14.2.1.1.2 | ColumnfcoeStatsFcfAdded | read-only | current | The number of FCF added to the FCOE database. |
| 1.3.6.1.4.1.20301.2.7.21.14.2.1.1.3 | ColumnfcoeStatsFcfRemoved | read-only | current | The number of FCF removed to the FCOE database. |
| 1.3.6.1.4.1.20301.2.7.21.14.2.1.1.4 | ColumnfcoeStatsFcoeAdded | read-only | current | The number of FCOE connection added to the FCOE database. |
| 1.3.6.1.4.1.20301.2.7.21.14.2.1.1.5 | ColumnfcoeStatsFcoeRemoved | read-only | current | The number of FCOE connection removed to the FCOE database. |
| 1.3.6.1.4.1.20301.2.7.21.14.2.2 | TablefcoeStatsKeepAliveTable | not-accessible | current | The table of fcoe Keep-Alive statistics. |
| 1.3.6.1.4.1.20301.2.7.21.14.2.2.1 | RowfcoeStatsKeepAliveEntry | not-accessible | current | A FCF Keep Alive entry. |
| 1.3.6.1.4.1.20301.2.7.21.14.2.2.1.1 | ColumnfcoeStatsKeepAliveIndex | read-only | current | The FCF index |
| 1.3.6.1.4.1.20301.2.7.21.14.2.2.1.2 | ColumnfcoeStatsKeepAliveFcfMac | read-only | current | Detected FCF MAC address. |
| 1.3.6.1.4.1.20301.2.7.21.14.2.2.1.3 | ColumnfcoeStatsKeepAliveCount | read-only | current | FCF MAC Keep Alive count. |
| 1.3.6.1.4.1.20301.2.7.21.14.2.3 | ScalarfcoeStatsResetAllCounters | read-write | current | Reset all FCOE statistics counters. |
| 1.3.6.1.4.1.20301.2.7.21.14.3 | NodefcoeInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.14.3.1 | NodefipsInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.1 | TablefipsInfoPortTable | not-accessible | current | The table of fips port run-time information. |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.1.1 | RowfipsInfoPortEntry | not-accessible | current | A port in the fips information table. |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.1.1.1 | ColumnfipsInfoPortIndex | read-only | current | The port index for fips |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.1.1.2 | ColumnfipsInfoAclSequencer | read-only | current | The fip sequence number for an acl in this port |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.1.1.3 | ColumnfipsInfoAcl | read-only | current | An FIPS ACL entry |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.1.1.4 | ColumnfipsInfoPortAlias | read-only | current | The port alias for fips |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.2 | NodefipsInfoFcf | |||
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.2.1 | ScalarfipsInfoFcfCount | read-only | current | Total number of FCFs detected |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.2.2 | TablefipsInfoFcfTable | not-accessible | current | The table of fips FCF detected. |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.2.2.1 | RowfipsInfoFcfEntry | not-accessible | current | A FCF in the fips information table. |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.2.2.1.1 | ColumnfipsInfoFcfIndex | read-only | current | FCF index |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.2.2.1.2 | ColumnfipsInfoFcfMac | read-only | current | FCF MAC |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.2.2.1.3 | ColumnfipsInfoFcfPort | read-only | current | FCF Port/Trunk alias |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.2.2.1.4 | ColumnfipsInfoFcfVlan | read-only | current | FCF Vlan |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.3 | NodefipsInfoFcoe | |||
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.3.1 | ScalarfipsInfoFcoeCount | read-only | current | Total number of FCOE connections |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2 | TablefipsInfoFcoeTable | not-accessible | current | The table of fips FCOE connections. |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2.1 | RowfipsInfoFcoeEntry | not-accessible | current | A FCOE connection in the fips information table. |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2.1.1 | ColumnfipsInfoFcoeIndex | read-only | current | FCOE connection index |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2.1.2 | ColumnfipsInfoFcoeVNPortMac | read-only | current | FCOE connection VNPort MAC |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2.1.3 | ColumnfipsInfoFcoeFcfMac | read-only | current | FCOE connection FCF MAC |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2.1.4 | ColumnfipsInfoFcoePort | read-only | current | FCOE connection Port/Trunk Alias. |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.3.2.1.5 | ColumnfipsInfoFcoeVlan | read-only | current | FCOE connection Vlan |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.4 | NodefipsInfoVlans | |||
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1 | TablefipsInfoVlansTable | not-accessible | current | The table of FCOE VLANs detected. |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1.1 | RowfipsInfoVlansEntry | not-accessible | current | A FCOE VLAN in the fipsInfoVlans information table. |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1.1.1 | ColumnfipsInfoVlansId | read-only | current | FCoE Vlan index |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1.1.2 | ColumnfipsInfoVlansFeatureIndex | read-only | current | FCoE Vlan feature index. The feature index will accept values from 1 to maximum SPAR ID(8) for the VLANs created by SPAR and 0 for the other types of VLANs. |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1.1.3 | ColumnfipsInfoVlansCreator | read-only | current | The FCoE VLAN Creator. |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1.1.4 | ColumnfipsInfoVlansPorts | read-only | current | The port list information in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ por… |
| 1.3.6.1.4.1.20301.2.7.21.14.3.1.4.1.1.5 | ColumnfipsInfoVlansTrunks | read-only | current | The FCoE VLAN trunk list. |
| 1.3.6.1.4.1.20301.2.7.21.14.4 | NodefcoeOper | |||
| 1.3.6.1.4.1.20301.2.7.21.14.4.1 | NodefipsOper | |||
| 1.3.6.1.4.1.20301.2.7.21.14.4.1.1 | ScalarfipsOperFcfDelete | read-write | current | Delete an FCF. Take an fcf mac address as the only parameter to delete this fcf from all vlans. Optionally take a vlan number as 2nd parameter to delete fcf fr… |
| 1.3.6.1.4.1.20301.2.7.21.15 | Nodevirt | |||
| 1.3.6.1.4.1.20301.2.7.21.15.1 | NodevirtGeneral | |||
| 1.3.6.1.4.1.20301.2.7.21.15.1.1 | ScalarvirtCurCfgState | read-only | current | VM groups global state. |
| 1.3.6.1.4.1.20301.2.7.21.15.1.2 | ScalarvirtNewCfgState | read-write | current | Enable/Disable Virtual Machine Groups |
| 1.3.6.1.4.1.20301.2.7.21.15.1.3 | ScalarvirtCurCfgHbPort | read-only | current | Current esx/esxi server to vcenter heartbeat UDP port |
| 1.3.6.1.4.1.20301.2.7.21.15.1.4 | ScalarvirtNewCfgHbPort | read-write | current | Set new esx/esxi server to vcenter heartbeat UDP port |
| 1.3.6.1.4.1.20301.2.7.21.15.1.5 | ScalarvirtCurCfgVirtCenterIp | read-only | current | The IP address of the Virtual Center. |
| 1.3.6.1.4.1.20301.2.7.21.15.1.6 | ScalarvirtNewCfgVirtCenterIp | read-write | current | The IP address of the Virtual Center. |
| 1.3.6.1.4.1.20301.2.7.21.15.1.7 | ScalarvirtCurCfgVirtCenterUser | read-only | current | Virtual Center username. |
| 1.3.6.1.4.1.20301.2.7.21.15.1.8 | ScalarvirtNewCfgVirtCenterUser | read-write | current | Virtual Center username. |
| 1.3.6.1.4.1.20301.2.7.21.15.1.9 | ScalarvirtCurCfgVirtCenterSSLAuth | read-only | current | Authenticate SSL Certificate. |
| 1.3.6.1.4.1.20301.2.7.21.15.1.10 | ScalarvirtNewCfgVirtCenterSSLAuth | read-write | current | Authenticate SSL Certificate. |
| 1.3.6.1.4.1.20301.2.7.21.15.1.11 | ScalarvirtNewCfgVirtCenterPasswd | read-write | current | Virtual Center password. |
| 1.3.6.1.4.1.20301.2.7.21.15.1.12 | ScalarvirtNewCfgVirtCenterDelete | read-write | current | Delete Virtual Center specifications |
| 1.3.6.1.4.1.20301.2.7.21.15.2 | NodevmGroups | |||
| 1.3.6.1.4.1.20301.2.7.21.15.2.1 | TablevmCurCfgGroupTable | not-accessible | current | The table of VM groups in the current config |
| 1.3.6.1.4.1.20301.2.7.21.15.2.1.1 | RowvmCurCfgGroupEntry | not-accessible | current | Information about VM on a group in current config. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.1.1.1 | ColumnvmCurCfgGroupIndex | read-only | current | The index of the vm group table. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.1.1.2 | ColumnvmCurCfgGroupVlan | read-only | current | Current Vlan used by the group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.1.1.3 | ColumnvmCurCfgGroupPorts | read-only | current | The port list in the VM Group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || |… |
| 1.3.6.1.4.1.20301.2.7.21.15.2.1.1.4 | ColumnvmCurCfgGroupTagState | read-only | current | Enable VLAN tagging on all VM group ports. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.1.1.5 | ColumnvmCurCfgGroupStg | read-only | current | Current stg of the group vlan. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.1.1.17 | ColumnvmCurCfgGroupProfileName | read-only | current | Current profile name used by the group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.1.1.18 | ColumnvmCurCfgGroupValidateMode | read-only | current | Current validation mode used by the group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.1.1.23 | ColumnvmCurCfgGroupVPorts | read-only | current | The vport list in the VM Group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2 | TablevmNewCfgGroupTable | not-accessible | current | The table of VM groups in the new config |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1 | RowvmNewCfgGroupEntry | not-accessible | current | Information about VM on a group in new config. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.1 | ColumnvmNewCfgGroupIndex | read-only | current | The index of the vm group table. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.2 | ColumnvmNewCfgGroupVlan | read-write | current | Set Vlan to be used by the group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.3 | ColumnvmNewCfgGroupPorts | read-only | current | The port list in the VM Group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || |… |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.4 | ColumnvmNewCfgGroupAddVm | read-write | current | Add a virtual machine to the group by UUID / Name / IP / MAC Address Note: MAC address format xx:xx:xx:xx:xx:xx |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.5 | ColumnvmNewCfgGroupRemVm | read-write | current | Remove a virtual machine from the group by UUID / Name / IP / MAC Address Note: MAC address format xx:xx:xx:xx:xx:xx |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.6 | ColumnvmNewCfgGroupAddVmIdx | read-write | current | Add virtual MAC address by index to the group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.7 | ColumnvmNewCfgGroupRemVmIdx | read-write | current | Remove a virtual MAC address by index from the group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.8 | ColumnvmNewCfgGroupAddPortIdx | read-write | current | Add a port to the group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.9 | ColumnvmNewCfgGroupRemPortIdx | read-write | current | Remove a port from the group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.10 | ColumnvmNewCfgGroupAddTrunk | read-write | current | Add trunk to the group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.11 | ColumnvmNewCfgGroupRemTrunk | read-write | current | Remove trunk from the group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.12 | ColumnvmNewCfgGroupTagState | read-write | current | Enable VLAN tagging on all VM group ports. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.13 | ColumnvmNewCfgGroupAddLacpKey | read-write | current | Add LACP trunk to the group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.14 | ColumnvmNewCfgGroupRemLacpKey | read-write | current | Remove LACP trunk from the group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.15 | ColumnvmNewCfgGroupAddProfile | read-write | current | Add VM Profile to the group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.16 | ColumnvmNewCfgGroupRemProfile | read-write | current | Remove any VM profile associated with the group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.17 | ColumnvmNewCfgGroupProfileName | read-only | current | New profile name to be used by the group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.18 | ColumnvmNewCfgGroupDelete | read-write | current | Delete VM Group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.19 | ColumnvmNewCfgGroupStg | read-write | current | Set group vlan spanning tree group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.20 | ColumnvmNewCfgGroupValidateMode | read-write | current | Set group validation mode: noValidation : no validation will be performed. basicCheck: validate ESX port. advancedCheck: validate ESX port and VM UUID. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.21 | ColumnvmNewCfgGroupAddvPort | read-write | current | Add vPort in VMGroup |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.22 | ColumnvmNewCfgGroupRemvPort | read-write | current | Remove vPort from VMGroup |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.23 | ColumnvmNewCfgGroupVPorts | read-only | current | The vport list in the VM Group. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.24 | ColumnvmNewCfgGroupAddPortAlias | read-write | current | Add a port to the group, using it's alias. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.2.1.25 | ColumnvmNewCfgGroupRemPortAlias | read-write | current | Remove a port from the group, using it's alias. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.3 | TablevmCurCfgGroupMacTable | not-accessible | current | Virtual machine group current configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.3.1 | RowvmCurCfgGroupMaclistEntry | not-accessible | current | Information about virtual machine group configuration. Indexes are: - vmCurCfgGroupMacGroupIndex - group number - vmCurCfgGroupMacVMIndex - virtual machine con… |
| 1.3.6.1.4.1.20301.2.7.21.15.2.3.1.1 | ColumnvmCurCfgGroupMacGroupIndex | read-only | current | The group number for which the info is related. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.3.1.2 | ColumnvmCurCfgGroupMacVMIndex | read-only | current | The virtual machine number for which the info is related. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.3.1.3 | ColumnvmCurCfgGroupMacVMMac | read-only | current | virtual machine MAC address. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.4 | TablevmNewCfgGroupMacTable | not-accessible | current | virtual machine group new configuration table. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.4.1 | RowvmNewCfgGroupMaclistEntry | not-accessible | current | Information about virtual machine group |
| 1.3.6.1.4.1.20301.2.7.21.15.2.4.1.1 | ColumnvmNewCfgGroupMacGroupIndex | read-only | current | The group number for which the info is related. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.4.1.2 | ColumnvmNewCfgGroupMacVMIndex | read-only | current | The virtual machine number for which the info is related. |
| 1.3.6.1.4.1.20301.2.7.21.15.2.4.1.3 | ColumnvmNewCfgGroupMacVMMac | read-only | current | The virtual machine MAC address. |
| 1.3.6.1.4.1.20301.2.7.21.15.3 | NodevmPolicy | |||
| 1.3.6.1.4.1.20301.2.7.21.15.3.1 | Nodevmbw | |||
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.1 | TablevmbwCurCfgTable | not-accessible | current | The table of current VM Bandwidth configuration. |
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1 | RowvmbwCurCfgEntry | not-accessible | current | A row in the current VM bandwidth table. |
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.1 | ColumnvmbwCurCfgMac | read-only | current | MAC address of VM for which bandwidth control information is related. |
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.2 | ColumnvmbwCurCfgTxRate | read-only | current | VM transmit bandwidth committed rate in kbps (ingress for switch). |
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.3 | ColumnvmbwCurCfgTxBurst | read-only | current | VM transmit bandwidth max burst size in kilobits (ingress for switch). |
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.4 | ColumnvmbwCurCfgTxAclId | read-only | current | ACL used for VM transmit bandwidth. |
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.5 | ColumnvmbwCurCfgRxRate | read-only | current | VM receive bandwidth committed rate in kbps (egress for switch). |
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.6 | ColumnvmbwCurCfgRxBurst | read-only | current | VM receive bandwidth max burst size in kilobits (egress for switch). |
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.1.1.7 | ColumnvmbwCurCfgCtrl | read-only | current | Enable/Disable VM bandwidth control entry. |
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.2 | TablevmbwNewCfgTable | not-accessible | current | The table of new VM Bandwidth configuration. |
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1 | RowvmbwNewCfgEntry | not-accessible | current | A row in the new VM bandwidth table. |
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.1 | ColumnvmbwNewCfgMac | read-only | current | MAC address of VM for which bandwidth control information is related. |
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.2 | ColumnvmbwNewCfgTxRate | read-write | current | VM transmit bandwidth committed rate in kbps (ingress for switch). Set this to zero to disable transmit bandwidth control. |
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.3 | ColumnvmbwNewCfgTxBurst | read-write | current | VM transmit bandwidth max burst size in kilobits (ingress for switch). Set this to zero to disable transmit bandwidth control. |
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.4 | ColumnvmbwNewCfgTxAclId | read-write | current | ACL used for VM transmit bandwidth. This is optional parameter. If set to zero the system will choose one ACL for tx bandwidth control. |
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.5 | ColumnvmbwNewCfgRxRate | read-write | current | VM receive bandwidth committed rate in kbps (egress for switch). Set this to zero to disable receive bandwidth control. |
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.6 | ColumnvmbwNewCfgRxBurst | read-write | current | VM receive bandwidth max burst size in kilobits (egress for switch). Set this to zero to disable receive bandwidth control. |
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.7 | ColumnvmbwNewCfgCtrl | read-write | current | VM bandwidth control entry status |
| 1.3.6.1.4.1.20301.2.7.21.15.3.1.2.1.8 | ColumnvmbwNewCfgDelete | read-write | current | This is an action object to delete a VM Bandwidth entry. other(1) is returned always when read. To delete an entry enter delete(2). |
| 1.3.6.1.4.1.20301.2.7.21.15.4 | NodevmProfiles | |||
| 1.3.6.1.4.1.20301.2.7.21.15.4.1 | TablevmCurCfgProfilesTable | not-accessible | current | The table of VM profiles in the current config |
| 1.3.6.1.4.1.20301.2.7.21.15.4.1.1 | RowvmCurCfgProfileEntry | not-accessible | current | Information about a VM profile in current config. |
| 1.3.6.1.4.1.20301.2.7.21.15.4.1.1.1 | ColumnvmCurCfgProfileIndex | read-only | current | The index of the vm profiles table (1..32). |
| 1.3.6.1.4.1.20301.2.7.21.15.4.1.1.2 | ColumnvmCurCfgProfileName | read-only | current | VM Profile name. |
| 1.3.6.1.4.1.20301.2.7.21.15.4.1.1.3 | ColumnvmCurCfgProfileVlan | read-only | current | Current VM Profile VLAN Id |
| 1.3.6.1.4.1.20301.2.7.21.15.4.1.1.4 | ColumnvmCurCfgProfileShapingAverage | read-only | current | Current VM Profile Shaping Average. |
| 1.3.6.1.4.1.20301.2.7.21.15.4.1.1.5 | ColumnvmCurCfgProfileShapingBurst | read-only | current | Current VM Profile Shaping Burst. |
| 1.3.6.1.4.1.20301.2.7.21.15.4.1.1.6 | ColumnvmCurCfgProfileShapingPeak | read-only | current | Current VM Profile Shaping Peak. |
| 1.3.6.1.4.1.20301.2.7.21.15.4.1.1.7 | ColumnvmCurCfgProfileEgressShapingAverage | read-only | current | Current VM Profile Egress Shaping Average. |
| 1.3.6.1.4.1.20301.2.7.21.15.4.1.1.8 | ColumnvmCurCfgProfileEgressShapingBurst | read-only | current | Current VM Profile Egress Shaping Burst. |
| 1.3.6.1.4.1.20301.2.7.21.15.4.1.1.9 | ColumnvmCurCfgProfileEgressShapingPeak | read-only | current | Current VM Profile Egress Shaping Peak. |
| 1.3.6.1.4.1.20301.2.7.21.15.4.2 | TablevmNewCfgProfilesTable | not-accessible | current | The table of VM profiles in the current config |
| 1.3.6.1.4.1.20301.2.7.21.15.4.2.1 | RowvmNewCfgProfileEntry | not-accessible | current | Information about a VM profile in current config. |
| 1.3.6.1.4.1.20301.2.7.21.15.4.2.1.1 | ColumnvmNewCfgProfileIndex | read-only | current | The index of the vm profiles table (1..32). |
| 1.3.6.1.4.1.20301.2.7.21.15.4.2.1.2 | ColumnvmNewCfgProfileName | read-write | current | VM Profile name. |
| 1.3.6.1.4.1.20301.2.7.21.15.4.2.1.3 | ColumnvmNewCfgProfileVlan | read-write | current | Vlan to be used by the VM profile. |
| 1.3.6.1.4.1.20301.2.7.21.15.4.2.1.4 | ColumnvmNewCfgProfileShapingAverage | read-write | current | Shaping average to be used by the VM profile. |
| 1.3.6.1.4.1.20301.2.7.21.15.4.2.1.5 | ColumnvmNewCfgProfileShapingBurst | read-write | current | Shaping burst to be used by the VM profile. |
| 1.3.6.1.4.1.20301.2.7.21.15.4.2.1.6 | ColumnvmNewCfgProfileShapingPeak | read-write | current | Shaping peak to be used by the VM profile. |
| 1.3.6.1.4.1.20301.2.7.21.15.4.2.1.7 | ColumnvmNewCfgProfileDelete | read-write | current | Delete VM Profile. |
| 1.3.6.1.4.1.20301.2.7.21.15.4.2.1.8 | ColumnvmNewCfgProfileEgressShapingAverage | read-write | current | Egress shaping average to be used by the VM profile. |
| 1.3.6.1.4.1.20301.2.7.21.15.4.2.1.9 | ColumnvmNewCfgProfileEgressShapingBurst | read-write | current | Egress shaping burst to be used by the VM profile. |
| 1.3.6.1.4.1.20301.2.7.21.15.4.2.1.10 | ColumnvmNewCfgProfileEgressShapingPeak | read-write | current | Egress shaping peak to be used by the VM profile. |
| 1.3.6.1.4.1.20301.2.7.21.15.5 | NodevirtVMware | |||
| 1.3.6.1.4.1.20301.2.7.21.15.5.1 | ScalarvirtVMwareNameTableUpdate | read-write | current | This is an action object to get information from the Virtual Center. Set this value to get(2) to update the host and VM name tables: virtVMwareHostNameTable, v… |
| 1.3.6.1.4.1.20301.2.7.21.15.5.2 | TablevirtVMwareHostNameTable | not-accessible | current | The table of names of VMware hosts in the Virtual Center. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.2.1 | RowvirtVMwareHostNameEntry | not-accessible | current | Information about names of VMware hosts in the Data Center. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.2.1.1 | ColumnvirtVMwareHostNameIndex | read-only | current | The index of the virtVMwareHostNameTable table. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.2.1.2 | ColumnvirtVMwareHostNameUUID | read-only | current | The UUID of a VMware host. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.2.1.3 | ColumnvirtVMwareHostNameIpAddress | read-only | current | The IP address of a VMware host. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.2.1.4 | ColumnvirtVMwareHostNameName | read-only | current | The name of a VMware host. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.3 | TablevirtVMwareVMNameTable | not-accessible | current | The table of VMware virtual machines in the Data Center. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.3.1 | RowvirtVMwareVMNameEntry | not-accessible | current | Information about VMware virtual machines in the Data Center. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.3.1.1 | ColumnvirtVMwareVMNameIndex | read-only | current | The index of the VMware virtual machine table in the Data Center. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.3.1.2 | ColumnvirtVMwareVMNameUUID | read-only | current | The UUID of a virtual machine. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.3.1.3 | ColumnvirtVMwareVMNameVMwareName | read-only | current | The name of a virtual machine given by VMware. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.3.1.4 | ColumnvirtVMwareVMNameOsName | read-only | current | The name of a virtual machine given by the host OS. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.3.1.5 | ColumnvirtVMwareVMNameIpAddress | read-only | current | The IP address of a virtual machine. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.4 | ScalarvirtVMwareHost | read-write | current | VMware host ID This is an action object to get information about a specific host from the Virtual Center. This object specifies the host ID by UUID / IP Addres… |
| 1.3.6.1.4.1.20301.2.7.21.15.5.5 | TablevirtVMwareHostVswitchTable | not-accessible | current | The table of Vswitches available on the specified host. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.5.1 | RowvirtVMwareHostVswitchEntry | not-accessible | current | Information about Vswitches available on the specified host. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.5.1.1 | ColumnvirtVMwareHostVswitchIndex | read-only | current | The index of the Vswitch table on the specified host. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.5.1.2 | ColumnvirtVMwareHostVswitchName | read-only | current | The name of a Vswitch on the specified host. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.6 | TablevirtVMwareHostPGTable | not-accessible | current | The table of Port Groups available on the specified host. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.6.1 | RowvirtVMwareHostPGEntry | not-accessible | current | Information about Port Groups available on the specified host. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.6.1.1 | ColumnvirtVMwareHostPGIndex | read-only | current | The index of the Port Group table on the specified host. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.6.1.2 | ColumnvirtVMwareHostPGName | read-only | current | The name of a Port Group on the specified host. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.6.1.3 | ColumnvirtVMwareHostPGVswitchName | read-only | current | The name of a Vswitch on the specified host. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.7 | TablevirtVMwareHostDetailInfoTable | not-accessible | current | The table of detailed information available on the specified host/VM interface. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.7.1 | RowvirtVMwareHostDetailInfoEntry | not-accessible | current | Detailed information available on the specified host/VM interface. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.7.1.1 | ColumnvirtVMwareHostDetailInfoIndex | read-only | current | The index of the detailed information table on the specified host/VM interface. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.7.1.2 | ColumnvirtVMwareHostDetailInfoMACAddr | read-only | current | The MAC address of the host/VM interface. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.7.1.3 | ColumnvirtVMwareHostDetailInfoPortIdx | read-only | current | The port number of the specified host/VM interface. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.7.1.4 | ColumnvirtVMwareHostDetailInfoType | read-only | current | Interface type |
| 1.3.6.1.4.1.20301.2.7.21.15.5.7.1.5 | ColumnvirtVMwareHostDetailInfoIPAddr | read-only | current | The IP address of the specified host/VM interface. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.7.1.6 | ColumnvirtVMwareHostDetailInfoUUID | read-only | current | The UUID of the specified host/VM interface. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.7.1.7 | ColumnvirtVMwareHostDetailInfoVswitch | read-only | current | The name of the virtual switch of the specified host/VM interface. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.7.1.8 | ColumnvirtVMwareHostDetailInfoPortGroup | read-only | current | The name of the port group of the specified host/VM interface. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.7.1.9 | ColumnvirtVMwareHostDetailInfoVlanID | read-only | current | The VLAN ID of the specified host/VM interface. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.7.1.10 | ColumnvirtVMwareHostDetailInfoHostName | read-only | current | The name of the specified host interface. N/A for VMs. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.7.1.11 | ColumnvirtVMwareHostDetailInfoVMVCenterName | read-only | current | The name of the Virtual Center of the specified VM interface. N/A for host interfaces. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.7.1.12 | ColumnvirtVMwareHostDetailInfoVMOSHostName | read-only | current | The name of the VM set by the host operating system. N/A for host interfaces. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.7.1.13 | ColumnvirtVMwareHostDetailInfoVMCurrentHost | read-only | current | The name of the host of the specified VM. N/A for host interfaces. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.7.1.14 | ColumnvirtVMwareHostDetailInfoPortAlias | read-only | current | The port alias of the specified host/VM interface. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.8 | ScalarvirtVMwareVM | read-write | current | VMware virtual machine ID This is an action object to get information about a specific virtual machine from the Virtual Center. This object specifies the VM ID… |
| 1.3.6.1.4.1.20301.2.7.21.15.5.9 | TablevirtVMwareVMInfoTable | not-accessible | current | The table of networking information available on the specified VM. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.9.1 | RowvirtVMwareVMInfoEntry | not-accessible | current | Detailed information available on the specified VM. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.9.1.1 | ColumnvirtVMwareVMInfoIndex | read-only | current | The index of the table with information on the specified VM. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.9.1.2 | ColumnvirtVMwareVMInfoMACAddr | read-only | current | The MAC address of the specified VM. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.9.1.3 | ColumnvirtVMwareVMInfoPortAlias | read-only | current | The port alias of the specified VM. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.9.1.4 | ColumnvirtVMwareVMInfoType | read-only | current | Interface type |
| 1.3.6.1.4.1.20301.2.7.21.15.5.9.1.5 | ColumnvirtVMwareVMInfoIPAddr | read-only | current | The IP address of the specified VM. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.9.1.6 | ColumnvirtVMwareVMInfoUUID | read-only | current | The UUID of the specified VM. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.9.1.7 | ColumnvirtVMwareVMInfoVswitch | read-only | current | The name of the virtual switch of the specified VM. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.9.1.8 | ColumnvirtVMwareVMInfoPortGroup | read-only | current | The name of the port group of the specified VM. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.9.1.9 | ColumnvirtVMwareVMInfoVlanID | read-only | current | The VLAN ID of the specified VM. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.9.1.10 | ColumnvirtVMwareVMInfoVMVCenterName | read-only | current | The name of the Virtual Center of the specified VM. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.9.1.11 | ColumnvirtVMwareVMInfoVMOSHostName | read-only | current | The name of the VM set by the host operating system. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.9.1.12 | ColumnvirtVMwareVMInfoVMCurrentHost | read-only | current | The name of the host of the specified VM. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.9.1.13 | ColumnvirtVMwareVMInfoPortIdx | read-only | current | The port number of the specified VM. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.10 | NodevirtCurCfgVMwareHello | |||
| 1.3.6.1.4.1.20301.2.7.21.15.5.10.1 | ScalarvirtCurCfgVMwareHelloEnable | read-only | current | Current value for hello advertising status |
| 1.3.6.1.4.1.20301.2.7.21.15.5.10.2 | ScalarvirtCurCfgVMwareHelloTimer | read-only | current | Current hello packet send interval |
| 1.3.6.1.4.1.20301.2.7.21.15.5.10.3 | ScalarvirtCurCfgVMwareHelloPorts | read-only | current | Current value for the configured hello port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... |… |
| 1.3.6.1.4.1.20301.2.7.21.15.5.10.4 | ScalarvirtCurCfgVMwareHelloAddr | read-only | current | Current VM hello IP address |
| 1.3.6.1.4.1.20301.2.7.21.15.5.11 | NodevirtNewCfgVMwareHello | |||
| 1.3.6.1.4.1.20301.2.7.21.15.5.11.1 | ScalarvirtNewCfgVMwareHelloEnable | read-write | current | New value for hello advertising status |
| 1.3.6.1.4.1.20301.2.7.21.15.5.11.2 | ScalarvirtNewCfgVMwareHelloTimer | read-write | current | New hello packet send interval |
| 1.3.6.1.4.1.20301.2.7.21.15.5.11.3 | ScalarvirtNewCfgVMwareHelloPorts | read-only | current | New value for the configured hello port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || ||… |
| 1.3.6.1.4.1.20301.2.7.21.15.5.11.4 | ScalarvirtNewCfgVMwareHelloAddPortIdx | read-write | current | Add a port to the hello port list |
| 1.3.6.1.4.1.20301.2.7.21.15.5.11.5 | ScalarvirtNewCfgVMwareHelloRemovePortIdx | read-write | current | Remove a port from the hello port list |
| 1.3.6.1.4.1.20301.2.7.21.15.5.11.6 | ScalarvirtNewCfgVMwareHelloAddr | read-write | current | New VM hello IP address |
| 1.3.6.1.4.1.20301.2.7.21.15.5.11.7 | ScalarvirtNewCfgVMwareHelloAddPortAlias | read-write | current | Add a port to the hello port list, using it's alias. |
| 1.3.6.1.4.1.20301.2.7.21.15.5.11.8 | ScalarvirtNewCfgVMwareHelloRemovePortAlias | read-write | current | Remove a port from the hello port list, using it's alias. |
| 1.3.6.1.4.1.20301.2.7.21.15.7 | NodevmCheck | |||
| 1.3.6.1.4.1.20301.2.7.21.15.7.1 | NodevmCurCfgCheck | |||
| 1.3.6.1.4.1.20301.2.7.21.15.7.1.1 | ScalarvmCurCfgCheckActionBasic | read-only | current | Current settings for basic checking mode |
| 1.3.6.1.4.1.20301.2.7.21.15.7.1.2 | ScalarvmCurCfgCheckActionAdvanced | read-only | current | Current settings for advanced checking mode |
| 1.3.6.1.4.1.20301.2.7.21.15.7.1.3 | ScalarvmCurCfgCheckAclsMax | read-only | current | Current value for the maximum number of ACLs that can be used by Mac Spoofing Check feature |
| 1.3.6.1.4.1.20301.2.7.21.15.7.1.4 | ScalarvmCurCfgCheckTrust | read-only | current | Current value for the configured trusted port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .....… |
| 1.3.6.1.4.1.20301.2.7.21.15.7.2 | NodevmNewCfgCheck | |||
| 1.3.6.1.4.1.20301.2.7.21.15.7.2.1 | ScalarvmNewCfgCheckActionBasic | read-write | current | New settings for basic checking mode |
| 1.3.6.1.4.1.20301.2.7.21.15.7.2.2 | ScalarvmNewCfgCheckActionAdvanced | read-write | current | New settings for advanced checking mode |
| 1.3.6.1.4.1.20301.2.7.21.15.7.2.3 | ScalarvmNewCfgCheckAclsMax | read-write | current | New value for the maximum number of ACLs that can be used by Mac Spoofing Check feature |
| 1.3.6.1.4.1.20301.2.7.21.15.7.2.4 | ScalarvmNewCfgCheckTrust | read-only | current | New value for the configured trusted port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || … |
| 1.3.6.1.4.1.20301.2.7.21.15.7.2.5 | ScalarvmNewCfgCheckTrustAddPortIdx | read-write | current | Add port to the configured trusted port list. |
| 1.3.6.1.4.1.20301.2.7.21.15.7.2.6 | ScalarvmNewCfgCheckTrustRemPortIdx | read-write | current | Remove port from the configured trusted port list. |
| 1.3.6.1.4.1.20301.2.7.21.15.7.2.7 | ScalarvmNewCfgCheckTrustAddPortAlias | read-write | current | Add port alias to the configured trusted port list. |
| 1.3.6.1.4.1.20301.2.7.21.15.7.2.8 | ScalarvmNewCfgCheckTrustRemPortAlias | read-write | current | Remove port alias from the configured trusted port list. |
| 1.3.6.1.4.1.20301.2.7.21.15.8 | NodevmReadyMisc | |||
| 1.3.6.1.4.1.20301.2.7.21.15.8.1 | ScalarvmReadyLocalAdmMac | read-write | current | Treat locally administred MAC address as VMs |
| 1.3.6.1.4.1.20301.2.7.21.15.8.2 | TablevmReadyCurCfgOuiTbl | not-accessible | current | The table of current VM Ready OUI configuration. |
| 1.3.6.1.4.1.20301.2.7.21.15.8.2.1 | RowvmReadyCurCfgOuiEntry | not-accessible | current | A row in the current VM Ready OUI table. |
| 1.3.6.1.4.1.20301.2.7.21.15.8.2.1.1 | ColumnvmReadyCurCfgOuiMacIdx | read-only | current | OUI of locally administred MAC address |
| 1.3.6.1.4.1.20301.2.7.21.15.8.2.1.2 | ColumnvmReadyCurCfgOuiMac | read-only | current | OUI of locally administred MAC address |
| 1.3.6.1.4.1.20301.2.7.21.15.8.2.1.3 | ColumnvmReadyCurCfgVendor | read-only | current | Vendor name of the OUI locally administred |
| 1.3.6.1.4.1.20301.2.7.21.15.8.3 | TablevmReadyNewCfgOuiTbl | not-accessible | current | The table of new VM Ready OUI configuration. |
| 1.3.6.1.4.1.20301.2.7.21.15.8.3.1 | RowvmReadyNewCfgOuiEntry | not-accessible | current | A row in the new VM Ready OUI table. |
| 1.3.6.1.4.1.20301.2.7.21.15.8.3.1.1 | ColumnvmReadyNewCfgOuiMacIdx | read-only | current | OUI of locally administred MAC address |
| 1.3.6.1.4.1.20301.2.7.21.15.8.3.1.2 | ColumnvmReadyNewCfgOuiMac | read-write | current | New OUI of locally administred MAC address Format xx:yy:zz |
| 1.3.6.1.4.1.20301.2.7.21.15.8.3.1.3 | ColumnvmReadyNewCfgVendor | read-write | current | Vendor name of the OUI locally administred |
| 1.3.6.1.4.1.20301.2.7.21.15.8.3.1.4 | ColumnvmReadyNewCfgDelete | read-write | current | If set the OUI of the locally administred MAC would be deleted |
| 1.3.6.1.4.1.20301.2.7.21.17 | Nodeufp | |||
| 1.3.6.1.4.1.20301.2.7.21.17.1 | NodeufpConfig | |||
| 1.3.6.1.4.1.20301.2.7.21.17.1.1 | ScalarufpCurCfgState | read-only | current | UFP global state. |
| 1.3.6.1.4.1.20301.2.7.21.17.1.2 | ScalarufpNewCfgState | read-write | current | Enable/Disable UFP. |
| 1.3.6.1.4.1.20301.2.7.21.17.1.5 | TableufpCurCfgPortTable | not-accessible | current | The table of UFP ports |
| 1.3.6.1.4.1.20301.2.7.21.17.1.5.1 | RowufpCurCfgPortTableEntry | not-accessible | current | A port in the ufpCurCfgPortTable |
| 1.3.6.1.4.1.20301.2.7.21.17.1.5.1.1 | ColumnufpCurCfgPortIndex | read-only | current | Port index |
| 1.3.6.1.4.1.20301.2.7.21.17.1.5.1.2 | ColumnufpCurCfgPortState | read-only | current | UFP port state |
| 1.3.6.1.4.1.20301.2.7.21.17.1.5.1.4 | ColumnufpCurCfgPortQosMode | read-only | current | UFP port QoS Mode |
| 1.3.6.1.4.1.20301.2.7.21.17.1.6 | TableufpNewCfgPortTable | not-accessible | current | The table of UFP ports |
| 1.3.6.1.4.1.20301.2.7.21.17.1.6.1 | RowufpNewCfgPortTableEntry | not-accessible | current | A port in the ufpNewCfgPortTable |
| 1.3.6.1.4.1.20301.2.7.21.17.1.6.1.1 | ColumnufpNewCfgPortIndex | read-only | current | Port index |
| 1.3.6.1.4.1.20301.2.7.21.17.1.6.1.2 | ColumnufpNewCfgPortState | read-write | current | UFP port state |
| 1.3.6.1.4.1.20301.2.7.21.17.1.6.1.4 | ColumnufpNewCfgPortDelete | read-write | current | Delete UFP port |
| 1.3.6.1.4.1.20301.2.7.21.17.1.6.1.5 | ColumnufpNewCfgPortQosMode | read-write | current | UFP port QoS Mode |
| 1.3.6.1.4.1.20301.2.7.21.17.1.7 | TableufpCurCfgVportTable | not-accessible | current | Table of UFP virtual ports |
| 1.3.6.1.4.1.20301.2.7.21.17.1.7.1 | RowufpCurCfgVportTableEntry | not-accessible | current | A vPort in the ufpCurCfgVportTable |
| 1.3.6.1.4.1.20301.2.7.21.17.1.7.1.1 | ColumnufpCurCfgVportPortIndex | read-only | current | The port number of the vPort |
| 1.3.6.1.4.1.20301.2.7.21.17.1.7.1.2 | ColumnufpCurCfgVportIndex | read-only | current | The vport number of the vPort |
| 1.3.6.1.4.1.20301.2.7.21.17.1.7.1.3 | ColumnufpCurCfgVportState | read-only | current | The vPort state |
| 1.3.6.1.4.1.20301.2.7.21.17.1.7.1.4 | ColumnufpCurCfgVportNetworkMode | read-only | current | The vPort network mode |
| 1.3.6.1.4.1.20301.2.7.21.17.1.7.1.5 | ColumnufpCurCfgVportNetworkDefVlan | read-only | current | The vPort network default VLAN |
| 1.3.6.1.4.1.20301.2.7.21.17.1.7.1.6 | ColumnufpCurCfgVportNetworkDefTag | read-only | current | The vPort network default tag |
| 1.3.6.1.4.1.20301.2.7.21.17.1.7.1.7 | ColumnufpCurCfgVportQosBwMin | read-only | current | The vPort QoS minimum guaranteed bandwidth |
| 1.3.6.1.4.1.20301.2.7.21.17.1.7.1.8 | ColumnufpCurCfgVportQosBwMax | read-only | current | The vPort QoS maximum allowed bandwidth |
| 1.3.6.1.4.1.20301.2.7.21.17.1.7.1.9 | ColumnufpCurCfgVportQosEtsPrio | read-only | current | The vPort Ets system class priority |
| 1.3.6.1.4.1.20301.2.7.21.17.1.7.1.10 | ColumnufpCurCfgVportQosHostCtrl | read-only | current | The vPort host COS control |
| 1.3.6.1.4.1.20301.2.7.21.17.1.7.1.12 | ColumnufpCurCfgVportPrivateVlan | read-only | current | The vPort network Private VLAN mode |
| 1.3.6.1.4.1.20301.2.7.21.17.1.8 | TableufpNewCfgVportTable | not-accessible | current | Table of UFP virtual ports |
| 1.3.6.1.4.1.20301.2.7.21.17.1.8.1 | RowufpNewCfgVportTableEntry | not-accessible | current | A vPort in the ufpNewCfgVportTable |
| 1.3.6.1.4.1.20301.2.7.21.17.1.8.1.1 | ColumnufpNewCfgVportPortIndex | read-only | current | The port number of the vPort |
| 1.3.6.1.4.1.20301.2.7.21.17.1.8.1.2 | ColumnufpNewCfgVportIndex | read-only | current | The vport number of the vPort |
| 1.3.6.1.4.1.20301.2.7.21.17.1.8.1.3 | ColumnufpNewCfgVportState | read-write | current | The vPort state |
| 1.3.6.1.4.1.20301.2.7.21.17.1.8.1.4 | ColumnufpNewCfgVportNetworkMode | read-write | current | The vPort network mode |
| 1.3.6.1.4.1.20301.2.7.21.17.1.8.1.5 | ColumnufpNewCfgVportNetworkDefVlan | read-write | current | The vPort network default VLAN |
| 1.3.6.1.4.1.20301.2.7.21.17.1.8.1.6 | ColumnufpNewCfgVportNetworkDefTag | read-write | current | The vPort network default tag |
| 1.3.6.1.4.1.20301.2.7.21.17.1.8.1.7 | ColumnufpNewCfgVportQosBwMin | read-write | current | The vPort QoS minimum guaranteed bandwidth |
| 1.3.6.1.4.1.20301.2.7.21.17.1.8.1.8 | ColumnufpNewCfgVportQosBwMax | read-write | current | The vPort QoS maximum allowed bandwidth |
| 1.3.6.1.4.1.20301.2.7.21.17.1.8.1.9 | ColumnufpNewCfgVportQosEtsPrio | read-write | current | The vPort Ets system class priority |
| 1.3.6.1.4.1.20301.2.7.21.17.1.8.1.10 | ColumnufpNewCfgVportQosHostCtrl | read-write | current | The vPort host COS control |
| 1.3.6.1.4.1.20301.2.7.21.17.1.8.1.11 | ColumnufpNewCfgVportDelete | read-write | current | Delete vPort |
| 1.3.6.1.4.1.20301.2.7.21.17.1.8.1.13 | ColumnufpNewCfgVportPrivateVlan | read-write | current | The vPort network Private VLAN mode |
| 1.3.6.1.4.1.20301.2.7.21.17.2 | NodeufpInfo | |||
| 1.3.6.1.4.1.20301.2.7.21.17.2.1 | TableufpInfoCdcpTable | not-accessible | current | The table of CDCP information per port |
| 1.3.6.1.4.1.20301.2.7.21.17.2.1.1 | RowufpInfoCdcpTableEntry | not-accessible | current | A port in the ufpInfoCdcpTable |
| 1.3.6.1.4.1.20301.2.7.21.17.2.1.1.1 | ColumnufpInfoCdcpPortIndex | read-only | current | Port Index |
| 1.3.6.1.4.1.20301.2.7.21.17.2.1.1.2 | ColumnufpInfoCdcpPortStatus | read-only | current | Cdcp port status |
| 1.3.6.1.4.1.20301.2.7.21.17.2.2 | TableufpInfoPortTable | not-accessible | current | The table of UFP port information |
| 1.3.6.1.4.1.20301.2.7.21.17.2.2.1 | RowufpInfoPortTableEntry | not-accessible | current | A port in the ufpInfoPortTable |
| 1.3.6.1.4.1.20301.2.7.21.17.2.2.1.1 | ColumnufpInfoPortIndex | read-only | current | Port index |
| 1.3.6.1.4.1.20301.2.7.21.17.2.2.1.2 | ColumnufpInfoPortState | read-only | current | Port state information |
| 1.3.6.1.4.1.20301.2.7.21.17.2.2.1.3 | ColumnufpInfoPortVports | read-only | current | Vports information |
| 1.3.6.1.4.1.20301.2.7.21.17.2.2.1.4 | ColumnufpInfoPortChan1 | read-only | current | Chan 1 state |
| 1.3.6.1.4.1.20301.2.7.21.17.2.2.1.5 | ColumnufpInfoPortChan2 | read-only | current | Chan 2 state |
| 1.3.6.1.4.1.20301.2.7.21.17.2.2.1.6 | ColumnufpInfoPortChan3 | read-only | current | Chan 3 state |
| 1.3.6.1.4.1.20301.2.7.21.17.2.2.1.7 | ColumnufpInfoPortChan4 | read-only | current | Chan 4 state |
| 1.3.6.1.4.1.20301.2.7.21.17.2.2.1.8 | ColumnufpInfoPortChan5 | read-only | current | Chan 5 state |
| 1.3.6.1.4.1.20301.2.7.21.17.2.2.1.9 | ColumnufpInfoPortChan6 | read-only | current | Chan 6 state |
| 1.3.6.1.4.1.20301.2.7.21.17.2.2.1.10 | ColumnufpInfoPortChan7 | read-only | current | Chan 7 state |
| 1.3.6.1.4.1.20301.2.7.21.17.2.2.1.11 | ColumnufpInfoPortChan8 | read-only | current | Chan 8 state |
| 1.3.6.1.4.1.20301.2.7.21.17.2.3 | TableufpInfoQosTable | not-accessible | current | The table of Qos information per port |
| 1.3.6.1.4.1.20301.2.7.21.17.2.3.1 | RowufpInfoQosTableEntry | not-accessible | current | A port in the ufpInfoQosTable |
| 1.3.6.1.4.1.20301.2.7.21.17.2.3.1.1 | ColumnufpInfoQosPortIndex | read-only | current | Port index |
| 1.3.6.1.4.1.20301.2.7.21.17.2.3.1.2 | ColumnufpInfoQosVportIndex | read-only | current | Vport index |
| 1.3.6.1.4.1.20301.2.7.21.17.2.3.1.3 | ColumnufpInfoQosMinBw | read-only | current | Minimum bandwidth per vport |
| 1.3.6.1.4.1.20301.2.7.21.17.2.3.1.4 | ColumnufpInfoQosMaxBw | read-only | current | Maximum bandwidth per vport |
| 1.3.6.1.4.1.20301.2.7.21.17.2.3.1.5 | ColumnufpInfoQosEtsPrio | read-only | current | Prority group assigned to vport |
| 1.3.6.1.4.1.20301.2.7.21.17.2.3.1.6 | ColumnufpInfoQosEtsHostCtrl | read-only | current | The vPort host COS control |
| 1.3.6.1.4.1.20301.2.7.21.17.2.3.1.7 | ColumnufpInfoQosModeRev | read-only | current | UFP port QOS Mode |
| 1.3.6.1.4.1.20301.2.7.21.17.2.4 | TableufpInfoTlvstatTable | not-accessible | current | The table of TLV information per port |
| 1.3.6.1.4.1.20301.2.7.21.17.2.4.1 | RowufpInfoTlvstatTableEntry | not-accessible | current | A port in the ufpInfoTlvstatTable |
| 1.3.6.1.4.1.20301.2.7.21.17.2.4.1.1 | ColumnufpInfoTlvstatPortIndex | read-only | current | Port Index |
| 1.3.6.1.4.1.20301.2.7.21.17.2.4.1.2 | ColumnufpInfoTlvstatPortStatus | read-only | current | TLV port status |
| 1.3.6.1.4.1.20301.2.7.21.17.2.5 | TableufpInfoVlanTable | not-accessible | current | The table of VLAN information |
| 1.3.6.1.4.1.20301.2.7.21.17.2.5.1 | RowufpInfoVlanTableEntry | not-accessible | current | A VLAN in the ufpInfoVlanTable |
| 1.3.6.1.4.1.20301.2.7.21.17.2.5.1.1 | ColumnufpInfoVlanIndex | read-only | current | VLAN Index |
| 1.3.6.1.4.1.20301.2.7.21.17.2.5.1.2 | ColumnufpInfoVlanVportList | read-only | current | Virtual ports list |
| 1.3.6.1.4.1.20301.2.7.21.17.2.5.1.3 | ColumnufpInfoVlanExtPortList | read-only | current | External ports list |
| 1.3.6.1.4.1.20301.2.7.21.17.2.5.1.4 | ColumnufpInfoVlanIntPortList | read-only | current | Internal ports list |
| 1.3.6.1.4.1.20301.2.7.21.17.2.5.1.5 | ColumnufpInfoVlanUfpPortList | read-only | current | UFP ports list |
| 1.3.6.1.4.1.20301.2.7.21.17.2.5.1.6 | ColumnufpInfoVlanVmrPortList | read-only | current | VMReady ports list |
| 1.3.6.1.4.1.20301.2.7.21.17.2.6 | TableufpInfoVportTable | not-accessible | current | The table of vPort information |
| 1.3.6.1.4.1.20301.2.7.21.17.2.6.1 | RowufpInfoVportTableEntry | not-accessible | current | A vport in the ufpInfoVportTable |
| 1.3.6.1.4.1.20301.2.7.21.17.2.6.1.1 | ColumnufpInfoVportPortIndex | read-only | current | Port Index |
| 1.3.6.1.4.1.20301.2.7.21.17.2.6.1.2 | ColumnufpInfoVportIndex | read-only | current | vPort Index |
| 1.3.6.1.4.1.20301.2.7.21.17.2.6.1.3 | ColumnufpInfoVportState | read-only | current | vPort State |
| 1.3.6.1.4.1.20301.2.7.21.17.2.6.1.4 | ColumnufpInfoVportMode | read-only | current | vPort Mode |
| 1.3.6.1.4.1.20301.2.7.21.17.2.6.1.5 | ColumnufpInfoVportSvid | read-only | current | vPort Svid |
| 1.3.6.1.4.1.20301.2.7.21.17.2.6.1.6 | ColumnufpInfoVportDefaultVlan | read-only | current | vPort Default VLAN |
| 1.3.6.1.4.1.20301.2.7.21.17.2.6.1.7 | ColumnufpInfoVportDefaultTag | read-only | current | vPort Default Tag |
| 1.3.6.1.4.1.20301.2.7.21.17.2.6.1.8 | ColumnufpInfoVportVlans | read-only | current | vPort VLANs |
| 1.3.6.1.4.1.20301.2.7.21.17.2.7 | ScalarufpInfoQosMode | read-only | current | Global UFP QoS Mode. This object is deprecated. Use ufpInfoQosModeRev instead. |
| 1.3.6.1.4.1.20301.3 | IdentityibmGbTORG8264CSSIFMIB | MIB for Lenovo G8264CS, SI Fabric All Rights reserved DEVICE VERSION: 8.4.12.0 | ||
| 1.3.6.1.4.1.20301.100 | Nodeibmnos-BladeSwitch | |||
| 1.3.6.1.4.1.20301.100.27 | Nodeibmnoscfa | |||
| 1.3.6.1.4.1.20301.100.27.1 | Nodeif | |||
| 1.3.6.1.4.1.20301.100.27.1.4 | TableifMainTable | not-accessible | current | A list of all the interface entries in the system. This table contains objects which are applicable to all types of interfaces in the system. This table is a p… |
| 1.3.6.1.4.1.20301.100.27.1.4.1 | RowifMainEntry | not-accessible | current | An entry containing management information applicable to a particular interface. |
| 1.3.6.1.4.1.20301.100.27.1.4.1.1 | ColumnifMainIndex | not-accessible | current | A unique value, greater than zero, for each interface. This object is identical to the ifIndex of the standard MIB-2 ifTable. |
| 1.3.6.1.4.1.20301.100.27.1.4.1.9 | ColumnifMainPortName | read-write | current | This is used to assign a alias to a port |
| 1.3.6.1.4.1.20301.100.81 | Nodeibmnos | |||
| 1.3.6.1.4.1.20301.100.81.1 | NodeibmnosSystem | |||
| 1.3.6.1.4.1.20301.100.81.1.10 | ScalaribmnosConfigSaveOption | read-write | current | Specifies whether the configurations of the switch has to be saved or not. The value 'noSave' specifies that the configurations need not be saved. The value 'f… |
| 1.3.6.1.4.1.20301.100.81.1.12 | ScalaribmnosConfigSaveFileName | read-write | current | Name of the file in which the switch configurations are to be saved. This object is valid only if 'issConfigSaveOption' is chosen to be 'flashSave' or 'remoteS… |
| 1.3.6.1.4.1.20301.100.81.1.13 | ScalaribmnosInitiateConfigSave | read-write | current | When set as 'true' switch configurations save operation is initiated. As soon as the configuration save operation is completed, the value of this object revert… |
| 1.3.6.1.4.1.20301.100.81.1.14 | ScalaribmnosConfigSaveStatus | read-only | current | Status of configuration save operation. |
| 1.3.6.1.4.1.20301.100.81.1.15 | ScalaribmnosConfigRestoreOption | read-write | current | Specifies whether the switch configurations have to be restored or not. The value 'factory' specifies that the switch configurations need not be restored when … |
| 1.3.6.1.4.1.20301.100.81.1.26 | ScalaribmnosLoggingOption | read-write | current | The Logging option specifying whether the logging is to be done at console or to a file(system buffer) in the system. |
| 1.3.6.1.4.1.20301.100.81.1.32 | ScalaribmnosLoginAuthentication | read-write | current | The mechanism by which the user login to access the GUI for configuration has to be authenticated. Authentication is done either locally or in the remote side … |
| 1.3.6.1.4.1.20301.100.81.1.40 | ScalaribmnosConfigRestoreFileVersion | read-only | current | Config Restoration file version. This version will be compared in each reboot against version stored in restoration file. Restoration will occur only if the fi… |
| 1.3.6.1.4.1.20301.100.81.2 | NodeibmnosConfigControl | |||
| 1.3.6.1.4.1.20301.100.81.2.2 | TableibmnosPortCtrlTable | not-accessible | current | A table to control the port specific parameters of the device like speed, duplex mode, etc. |
| 1.3.6.1.4.1.20301.100.81.2.2.1 | RowibmnosPortCtrlEntry | not-accessible | current | An entry appears in this table for each interface in the system. Index to the table is the interface index of the port. |
| 1.3.6.1.4.1.20301.100.81.2.2.1.1 | ColumnibmnosPortCtrlIndex | not-accessible | current | Interface index of the port for which the configuration in this entry applies. |
| 1.3.6.1.4.1.20301.100.81.2.2.1.2 | ColumnibmnosPortCtrlMode | read-write | current | Speficies the mode in which the speed, duplex modes and flow control of the interface is determined. If set as 'auto', the hardware senses speed and negotiates… |
| 1.3.6.1.4.1.20301.100.81.2.2.1.3 | ColumnibmnosPortCtrlDuplex | read-write | current | Configures interface data transfer mode as full-duplex or half-duplex. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'Por… |
| 1.3.6.1.4.1.20301.100.81.2.2.1.4 | ColumnibmnosPortCtrlSpeed | read-write | current | Configures interface speed. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value … |
| 1.3.6.1.4.1.20301.100.81.2.2.1.5 | ColumnibmnosPortCtrlFlowControl | read-write | current | Enables / disables flow control for the interface. This object be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it… |
| 1.3.6.1.4.1.20301.100.81.2.2.1.10 | ColumnibmnosPortCtrlAlias | read-only | current | The port alias. |
| 1.3.6.1.4.1.20301.100.100 | Nodetoraddon | |||
| 1.3.6.1.4.1.20301.100.100.2 | Nodecfa | |||
| 1.3.6.1.4.1.20301.100.100.2.1 | TableibmnosPortCfgTable | not-accessible | current | The table of port configuration in the new_configuration block. |
| 1.3.6.1.4.1.20301.100.100.2.1.1 | RowibmnosPortCfgTableEntry | not-accessible | current | A row in the port configuration table in the new_configuration block. |
| 1.3.6.1.4.1.20301.100.100.2.1.1.1 | ColumnibmnosPortCfgIndx | not-accessible | current | The index of the row in port configurations table. |
| 1.3.6.1.4.1.20301.100.100.2.1.1.2 | ColumnibmnosPortCfgVlanTag | read-write | current | VLAN tag configured for the port |
| 1.3.6.1.4.1.20301.100.100.7 | Nodesys | |||
| 1.3.6.1.4.1.20301.100.100.7.2 | ScalaragImageForNextReset | read-write | current | The software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2 |
| 1.3.6.1.4.1.20301.100.100.13 | NodeibmnosFdb | |||
| 1.3.6.1.4.1.20301.100.100.13.5 | TableibmnosFdbTable | not-accessible | current | The table of FDB entries. |
| 1.3.6.1.4.1.20301.100.100.13.5.1 | RowibmnosFdbEntry | not-accessible | current | A row in the FDB table |
| 1.3.6.1.4.1.20301.100.100.13.5.1.1 | ColumnibmnosFdbVlan | not-accessible | current | The VLAN ID for the FDB entry. |
| 1.3.6.1.4.1.20301.100.100.13.5.1.2 | ColumnibmnosFdbMacAddr | not-accessible | current | The MAC address for the FDB entry. |
| 1.3.6.1.4.1.20301.100.100.13.5.1.3 | ColumnibmnosFdbMacAddrStr | read-only | current | The MAC address in hex format for the FDB entry. This node is added for display purpose. |
| 1.3.6.1.4.1.20301.100.100.13.5.1.4 | ColumnibmnosFdbVlanId | read-only | current | The VLAN ID for the FDB entry. This node is added for display purpose. |
| 1.3.6.1.4.1.20301.100.100.13.5.1.5 | ColumnibmnosFdbSrcPort | read-only | current | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance has been seen. A… |
| 1.3.6.1.4.1.20301.100.100.13.5.1.6 | ColumnibmnosFdbSrcTrunk | read-only | current | Either the value '0', or the trunk number of the trunk on which a frame having a source address equal to the value of the corresponding instance has been seen.… |
| 1.3.6.1.4.1.20301.100.100.13.5.1.7 | ColumnibmnosFdbState | read-only | current | The state of the FDB entry. The meanings of the values are : unknown(1) : the MAC address has not yet been learned by the switch but has only been seen as a de… |
| 1.3.6.1.4.1.20301.100.100.13.5.1.10 | ColumnibmnosFdbStatus | read-only | current | '1' if it is permanent '0' if it is not permanent |
| 1.3.6.1.4.1.20301.100.100.13.5.1.11 | ColumnibmnosFdbClearMac | read-write | current | Setting this value to clear(2) clears the corresponding table entry in FDB. |
| 1.3.6.1.4.1.20301.100.100.14 | Nodetor-switch | |||
| 1.3.6.1.4.1.20301.100.100.14.1 | TablehardwareTable | not-accessible | current | The table with the hardware information for the switches in the fabric. |
| 1.3.6.1.4.1.20301.100.100.14.1.1 | RowhardwareTableEntry | not-accessible | current | Hardware related information for a switch in the fabric. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.1 | ColumnhardwareSwitchNumber | read-only | current | The number of the attached switch. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.2 | ColumnhardwareSwitchRunningSwVersion | read-only | current | The switch software version. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.3 | ColumnhwTemperatureSensor1 | read-only | current | The temperature sensor 1. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.4 | ColumnhwTemperatureSensor2 | read-only | current | The temperature sensor 2. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.5 | ColumnhwTemperatureSensor3 | read-only | current | The temperature sensor 3. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.6 | ColumnhwTemperatureSensor4 | read-only | current | The temperature sensor 4. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.7 | ColumnhwTemperatureSensor5 | read-only | current | The temperature sensor 5. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.8 | ColumnhwTemperatureSensor6 | read-only | current | The temperature sensor 6. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.14 | ColumnhwFan1RPMValue | read-only | current | The Fan 1 RPM value. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.15 | ColumnhwFan2RPMValue | read-only | current | The Fan 2 RPM value. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.16 | ColumnhwFan3RPMValue | read-only | current | The Fan 3 RPM value. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.17 | ColumnhwFan4RPMValue | read-only | current | The Fan 4 RPM value. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.18 | ColumnhwFan5RPMValue | read-only | current | The Fan 5 RPM value. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.19 | ColumnhwFan6RPMValue | read-only | current | The Fan 6 RPM value. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.20 | ColumnhwFan7RPMValue | read-only | current | The Fan 7 RPM value. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.21 | ColumnhwFan8RPMValue | read-only | current | The Fan 8 RPM value. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.22 | ColumnhwPowerSupply1State | read-only | current | The Power Supply 1 state. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.23 | ColumnhwPowerSupply2State | read-only | current | The Power Supply 2 state. |
| 1.3.6.1.4.1.20301.100.100.14.1.1.24 | ColumnswImage1Version | read-only | current | Software image1 version |
| 1.3.6.1.4.1.20301.100.100.14.1.1.25 | ColumnswImage2Version | read-only | current | Software image2 version |
| 1.3.6.1.4.1.20301.100.100.14.1.1.26 | ColumnswBootVersion | read-only | current | Software boot version |
| 1.3.6.1.4.1.20301.100.100.14.22 | TableibmnosSfpInfoTable | not-accessible | current | The table of external port SFP information. |
| 1.3.6.1.4.1.20301.100.100.14.22.1 | RowibmnosSfpInfoTableEntry | not-accessible | current | A row in the external port SFP information table. |
| 1.3.6.1.4.1.20301.100.100.14.22.1.1 | ColumnibmnosSfpInfoIndx | read-only | current | Sfp Info index (port number) |
| 1.3.6.1.4.1.20301.100.100.14.22.1.2 | ColumnibmnosSfpInfoDescription | read-only | current | Type Ethernet device (None(0), SFP(1), CX4(2), SFPplus(3), DAC(6)) |
| 1.3.6.1.4.1.20301.100.100.14.22.1.3 | ColumnibmnosSfpInfoSerialNumber | read-only | current | Serial Number. |
| 1.3.6.1.4.1.20301.100.100.14.22.1.4 | ColumnibmnosSfpInfoPartNumber | read-only | current | Part Number. |
| 1.3.6.1.4.1.20301.100.100.14.22.1.5 | ColumnibmnosSfpInfoHWRevision | read-only | current | Hardware Revision |
| 1.3.6.1.4.1.20301.100.100.17 | NodeibmnosBladeHarmony | |||
| 1.3.6.1.4.1.20301.100.100.17.1 | NodedataCollection | |||
| 1.3.6.1.4.1.20301.100.100.17.1.1 | ScalaribmnosPortTableMaxEnt | read-only | current | The maximum number of rows in the port configuration host table. |
| 1.3.6.1.4.1.20301.100.100.17.1.3 | ScalaribmnosImage1Ver | read-only | current | The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available o… |
| 1.3.6.1.4.1.20301.100.100.17.1.4 | ScalaribmnosImage2Ver | read-only | current | The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available o… |
| 1.3.6.1.4.1.20301.100.100.17.1.5 | ScalarhwSwitchSoftwareVersion | read-only | current | The switch software version. |
| 1.3.6.1.4.1.20301.100.100.17.1.8 | ScalaribmnosReset | read-write | current | This is an action object to reboot the agent. other(1) is returned always when read. |
| 1.3.6.1.4.1.20301.100.100.17.1.9 | ScalaribmnosBootVer | read-only | current | The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available. |
| 1.3.6.1.4.1.20301.100.100.17.1.10 | ScalaribmnosConfigForNxtReset | read-write | current | The configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup con… |
| 1.3.6.1.4.1.20301.100.100.17.1.11 | ScalaribmnosSoftwareVersion | read-only | current | The version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if … |
| 1.3.6.1.4.1.20301.100.100.17.3 | NodeimageConfigTransfer | |||
| 1.3.6.1.4.1.20301.100.100.17.3.1 | ScalaragTftpServer | read-write | current | The TFTP server IP address or domain name. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PortNumber | Unsigned32 | current | Represents a port number of a switch. In fabric mode, the port number is 128-based, with the first port of the first switch having a port number of 1, the first port of the second switch is 129 (128+1), and so on. |
| Timeout | Integer32 | current | Time out value in 4 byte |
| VlanId | Integer32 (1..4094) | current | A 12-bit VLAN ID used in the VLAN Tag header. |