LINK-PROBE-MIB
425 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress |
| RFC1213-MIB | DisplayString sysName |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.568 | NodenetQuest | |||
| 1.3.6.1.4.1.568.8 | Nodelink-probe | |||
| 1.3.6.1.4.1.568.8.1 | NodeprobeConfig | |||
| 1.3.6.1.4.1.568.8.1 | NodepvcNotAvailDCE | This trap is generated when a PVC's unavailability is exceed the preset threshold due to the network fault. | ||
| 1.3.6.1.4.1.568.8.1.1 | Nodechan-config | |||
| 1.3.6.1.4.1.568.8.1.1.1 | Scalarlmi-Operation | read-write | mandatory | |
| 1.3.6.1.4.1.568.8.1.1.2 | Scalarlmi-DLCI | read-write | mandatory | LMI DLCI can just take two values: DLCI 0 or DLCI 1023, default is 0. |
| 1.3.6.1.4.1.568.8.1.1.3 | Scalarinband-IP-DLCI | read-write | mandatory | valid Inband IP DLCI ranges from 16 to 991, read only object |
| 1.3.6.1.4.1.568.8.1.1.4 | Scalarip-Encapsu | read-write | mandatory | Indicate which IP DLCI Encapsulation method |
| 1.3.6.1.4.1.568.8.1.1.5 | Scalarinterface-Speed | read-write | mandatory | Interface Speed is n*8 kpbs, the default value is 64 kbps. |
| 1.3.6.1.4.1.568.8.1.1.6 | Scalarnvram-update | write-only | mandatory | This object lets the user decide if he (she) wants to write the just modified parameters in channel configuration group to nvram, if he chose 'write', these pa… |
| 1.3.6.1.4.1.568.8.1.2 | Nodelmi-config | |||
| 1.3.6.1.4.1.568.8.1.2.1 | Scalarlmi-type | read-write | mandatory | This object identifies the LMI type the network is currently using, read/write object. |
| 1.3.6.1.4.1.568.8.1.2.2 | Scalarmax-Info-Length | read-write | mandatory | Maximum supported frame information length ranges from 400 to 4000, the default value is 4000. |
| 1.3.6.1.4.1.568.8.1.2.3 | Scalarn391-Counter | read-write | mandatory | N391 Counter ranges from 1 to 255, the default value is 6. |
| 1.3.6.1.4.1.568.8.1.2.4 | Scalarn392-Net-Counter | read-write | mandatory | N392 Net Counter ranges from 1 to 10, the default value is 3. |
| 1.3.6.1.4.1.568.8.1.2.5 | Scalarn392-User-Counter | read-write | mandatory | N392 User Counter ranges from 1 to 10, the default value is 3. |
| 1.3.6.1.4.1.568.8.1.2.6 | Scalarn393-Net-Counter | read-write | mandatory | N393 Net Counter ranges from 1 to 10, the default value is 4. |
| 1.3.6.1.4.1.568.8.1.2.7 | Scalarn393-User-Counter | read-write | mandatory | N393 User Counter ranges from 1 to 10, the default value is 4. |
| 1.3.6.1.4.1.568.8.1.2.8 | Scalart391-Timer | read-write | mandatory | T391 Timer ranges from 5 to 30, the default value is 10, which would always less than or equal to T392 Timer. |
| 1.3.6.1.4.1.568.8.1.2.9 | Scalart392-Timer | read-write | mandatory | T392 Timer ranges from 5 to 30, the default value is 15. which should always greater than T391 Timer. |
| 1.3.6.1.4.1.568.8.1.2.10 | ScalarlMI-Controller | write-only | mandatory | This object lets the user decide if he (she) wants to update the just modified LMI parameters, only when the user chooses to update will the new parameters be … |
| 1.3.6.1.4.1.568.8.1.3 | Nodepro-fun-config | |||
| 1.3.6.1.4.1.568.8.1.3.1 | ScalarsoftwareVersion | read-only | mandatory | This object displays the software version we are currently running, so according to the version number, the user can determine which version is newer. |
| 1.3.6.1.4.1.568.8.1.3.2 | Scalarprobe-Mode | read-write | mandatory | Probe mode defines whether the link probe is generator, responder, both or disabled. |
| 1.3.6.1.4.1.568.8.1.3.3 | Scalarpoll-Period | read-write | mandatory | poll period defines the frequency of sending the polling frame by the link probe. The value is between 1 to 60 sec. The poll period applies to all PVCs that ar… |
| 1.3.6.1.4.1.568.8.1.3.4 | Scalarsys-current-time | read-write | mandatory | sys-current-time displays the system current time with 4 digits year, 2 digits month, 2 digits date and hours, minutes and seconds, which are each 2 digits. If… |
| 1.3.6.1.4.1.568.8.1.3.5 | Scalarcurrent-intv-start-time | read-only | mandatory | current-intv-start-time displays the current interval starting time with 4 digits year, 2 digits month, 2 digits date and hours, minutes and seconds, which are… |
| 1.3.6.1.4.1.568.8.1.3.6 | Scalarpvc-Count | read-only | mandatory | PVC count defines the total number of PVCs which are to be probed. The value is between 1 to 20. |
| 1.3.6.1.4.1.568.8.1.3.7 | ScalarprobeTokenSize | read-write | mandatory | This object defines the probe token size. |
| 1.3.6.1.4.1.568.8.1.3.8 | Scalarpvc-add | write-only | mandatory | This object allows the user to add a PVC to the existing PVC table, the added PVC must not exist before it is added. |
| 1.3.6.1.4.1.568.8.1.3.9 | Scalarpvc-delete | write-only | mandatory | This object allows the user to delete a PVC from the existing PVC table, the deleted PVC must exist before it was deleted. |
| 1.3.6.1.4.1.568.8.1.3.10 | Tablepvc-Table | not-accessible | mandatory | PVC table, which lists PVCs that currently are probed. |
| 1.3.6.1.4.1.568.8.1.3.10.1 | Rowpvc-Entry | not-accessible | mandatory | Identifies an entry (row) in PVC table. |
| 1.3.6.1.4.1.568.8.1.3.10.1.1 | Columnpvc-Table-Index | read-only | mandatory | Identifies an entry (row) in PVC table. |
| 1.3.6.1.4.1.568.8.1.3.10.1.2 | Columnpvc-Operation | read-write | mandatory | This object identifies the three possible states which a pvc can be in, '1' means we are just collecting the statistical data for this PVC, '2' means we are no… |
| 1.3.6.1.4.1.568.8.1.3.10.1.3 | Columnpvc-Remote-IpAddress | read-only | mandatory | This object defines the IP address of the remote probe used with IP monitoring. |
| 1.3.6.1.4.1.568.8.1.3.11 | ScalaralternateVersion | read-only | mandatory | This object displays the software version we are not currently running, so according to the version number, the user can determine which version is newer. |
| 1.3.6.1.4.1.568.8.1.3.12 | ScalarbypassStatus | read-write | mandatory | This object identifies the three possible states which data bypass can be in. '1' means frame relay data bypass is off. '2' means frame relay data bypass is on… |
| 1.3.6.1.4.1.568.8.1.4 | Nodetrap-config | |||
| 1.3.6.1.4.1.568.8.1.4.1 | ScalartrapCtlGlobal | read-write | mandatory | This object is used to enable or disable system traps. Only when it is enabled, the standard traps, such as cold start trap, warm start trap; and enterprise sp… |
| 1.3.6.1.4.1.568.8.1.4.2 | ScalartrapCtlSpecific | read-write | mandatory | This parameter is a bitmap for the 16 enterprise specific traps, zero means all the traps are disabled and 0xffff means all the traps are enabled. The followin… |
| 1.3.6.1.4.1.568.8.1.4.3 | ScalarpvcNotAvailThreshDCE | read-write | mandatory | This parameter defines the allowed maximum PVC not availability threshold within current time interval due to a network fault. It is expressed as a percentage … |
| 1.3.6.1.4.1.568.8.1.4.4 | ScalarpvcNotAvailThreshDTE | read-write | mandatory | This parameter defines the allowed maximum PVC not availability threshold within current time interval due to the local DTE fault. It is expressed as a percent… |
| 1.3.6.1.4.1.568.8.1.4.5 | ScalarpvcAveRTDThresh | read-write | mandatory | This parameter defines the allowed maximum PVC round trip time delay (milliseconds) within the current time interval. If the actual average round trip delay is… |
| 1.3.6.1.4.1.568.8.1.4.6 | ScalarfrChanUtilizThreshToDTE | read-write | mandatory | This parameter defines the maximum allowed frame relay channel utilization to the DTE direction. It is expressed in percentage. If the actual average utilizati… |
| 1.3.6.1.4.1.568.8.1.4.7 | ScalarfrChanUtilizThreshToDCE | read-write | mandatory | This parameter defines the maximum allowed frame relay channel utilization to the DCE direction. It is expressed in percentage. If the actual average utilizati… |
| 1.3.6.1.4.1.568.8.1.4.8 | ScalarpvcBecnThresh | read-write | mandatory | This parameter defines the maximum allowed BECNs for a PVC within current interval. If the actual BECNs are more than this threshold, a trap will be sent at th… |
| 1.3.6.1.4.1.568.8.1.4.9 | ScalarpvcFecnThresh | read-write | mandatory | This parameter defines the maximum allowed FECNs for a PVC within current interval. If the actual FECNs are more than this threshold, a trap will be sent at th… |
| 1.3.6.1.4.1.568.8.1.4.10 | ScalarpvcUtilToDTEThresh | read-write | mandatory | This parameter defines the maximum allowed PVC utilization to DTE within current interval. If the actual average utilization is more than this threshold, a tra… |
| 1.3.6.1.4.1.568.8.1.4.11 | ScalarpvcUtilToDCEThresh | read-write | mandatory | This parameter defines the maximum allowed PVC utilization to DCE within current interval. If the actual average utilization is more than this threshold, a tra… |
| 1.3.6.1.4.1.568.8.1.4.12 | ScalarchanLoadToDTEThresh-realTime | read-write | mandatory | This parameter defines the maximum allowed real-time channel load to the DTE direction (calculated within every TC). It is expressed in percentage. If the actu… |
| 1.3.6.1.4.1.568.8.1.4.13 | ScalarchanLoadToDCEThresh-realTime | read-write | mandatory | This parameter defines the maximum allowed real-time channel load to the DCE direction (calculated within every TC). It is expressed in percentage. If the actu… |
| 1.3.6.1.4.1.568.8.1.4.14 | ScalarchanLoadThreshToDTE-realTimeRange | read-write | mandatory | This parameter defines the variation range for real-time channel load to the DTE exception trap. If within the current TC interval, the variation of the actual… |
| 1.3.6.1.4.1.568.8.1.4.15 | ScalarchanLoadThreshToDCE-realTimeRange | read-write | mandatory | This parameter defines the variation range for real-time channel load to the DCE exception trap. If within the current TC interval, the variation of the actual… |
| 1.3.6.1.4.1.568.8.1.4.16 | ScalarpvcRTDThresh-realTime | read-write | mandatory | This parameter defines the maximum allowed real-time PVC Round Trip Delay in msec., it is calculated as the same frequency as the Probe Polls (1 to 60 sec.). I… |
| 1.3.6.1.4.1.568.8.1.4.17 | ScalarpvcRTDThresh-realTimeRange | read-write | mandatory | This parameter defines the variation range for real-time PVC RTD exception trap. If the variation of the current RTD value is more than this range compared wit… |
| 1.3.6.1.4.1.568.8.1.4.18 | ScalarpvcLoadToDTEThresh-realTime | read-write | mandatory | This parameter defines the maximum allowed real-time PVC load to the DTE direction (calculated within every TC). It is expressed in percentage. If the actual l… |
| 1.3.6.1.4.1.568.8.1.4.19 | ScalarpvcLoadToDCEThresh-realTime | read-write | mandatory | This parameter defines the maximum allowed real-time PVC load to the DCE direction (calculated within every TC). It is expressed in percentage. If the actual l… |
| 1.3.6.1.4.1.568.8.1.4.20 | ScalarpvcLoadToDTEThresh-realTimeRange | read-write | mandatory | This parameter defines the variation range for real-time PVC load to the DTE exception trap. If within the current TC interval, the variation of the actual uti… |
| 1.3.6.1.4.1.568.8.1.4.21 | ScalarpvcLoadToDCEThresh-realTimeRange | read-write | mandatory | This parameter defines the variation range for real-time PVC load to the DCE exception trap. If within the current TC interval, the variation of the actual uti… |
| 1.3.6.1.4.1.568.8.1.5 | Nodepvc-config | |||
| 1.3.6.1.4.1.568.8.1.5.1 | ScalarpvcTC | read-write | mandatory | This parameter defines the committed rate measurement time interval (in 1/10 second) which can be calculated as Bc/CIR. For example, if we want TC to be 1 sec.… |
| 1.3.6.1.4.1.568.8.1.5.2 | TablepvcCirEir-Table | not-accessible | mandatory | PVC table, which lists PVCs for which the statistical data are collected. |
| 1.3.6.1.4.1.568.8.1.5.2.1 | RowpvcCirEir-Entry | not-accessible | mandatory | Identifies an entry (row) in PVC CIR/EIR table. |
| 1.3.6.1.4.1.568.8.1.5.2.1.1 | ColumnpvcCirEir-Table-Index | read-only | mandatory | Identifies an entry (row) in PVC table. |
| 1.3.6.1.4.1.568.8.1.5.2.1.2 | ColumnpvcCirToDTE | read-write | mandatory | This parameter defines the committed information rate (bps) under normal condition in the direction of to DTE. |
| 1.3.6.1.4.1.568.8.1.5.2.1.3 | ColumnpvcCirToDCE | read-write | mandatory | This parameter defines the committed information rate (bps) under normal condition in the direction of to DCE. |
| 1.3.6.1.4.1.568.8.1.5.2.1.4 | ColumnpvcEirToDTE | read-write | mandatory | This parameter defines the maximum transfer information rate (bps) which the network is accepting in the direction of to DTE. |
| 1.3.6.1.4.1.568.8.1.5.2.1.5 | ColumnpvcEirToDCE | read-write | mandatory | This parameter defines the maximum transfer information rate (bps) which the network is accepting in the direction of to DCE. |
| 1.3.6.1.4.1.568.8.1.6 | Nodefile-download-config | |||
| 1.3.6.1.4.1.568.8.1.6.1 | ScalarsourceIpAddress | read-write | mandatory | This object defines the IP address of the place where the updated file would store, currently we use a long integer to display. |
| 1.3.6.1.4.1.568.8.1.6.2 | ScalarsourceFileName | read-write | mandatory | This object defines the name of the updated file. |
| 1.3.6.1.4.1.568.8.1.6.3 | ScalarsourceFileMode | read-write | mandatory | This object defines the mode of the updated file. |
| 1.3.6.1.4.1.568.8.1.6.4 | ScalartftpAction | write-only | mandatory | This object defines the action we will take of TFTP. |
| 1.3.6.1.4.1.568.8.1.6.5 | ScalarchangeVersion | read-write | mandatory | This object is related to the next software reset object, the user can change the version of software and reset it. If in the middle of a TFTP transfer, this o… |
| 1.3.6.1.4.1.568.8.1.6.6 | ScalarsoftwareReset | write-only | mandatory | This object is related to the previous software version object, the user can choose the version of software and reset it. If in the middle of a TFTP transfer, … |
| 1.3.6.1.4.1.568.8.1.6.7 | ScalartftpState | read-only | mandatory | This object defines the current state of the TFTP download. |
| 1.3.6.1.4.1.568.8.1.7 | Nodenet-management-config | |||
| 1.3.6.1.4.1.568.8.1.7.1 | ScalaripInterface | read-write | mandatory | This object defines the type of IP interface currently used in the system. pppIpInterface is an asynchronous ppp interface and isdnIpInterface is a synchronous… |
| 1.3.6.1.4.1.568.8.1.7.2 | ScalarinbandIpAddress | read-only | mandatory | This object defines the IP address of the probe over the inband interface. Even though separate from outbandIpAddress, this address only used when ipInterface … |
| 1.3.6.1.4.1.568.8.1.7.3 | ScalaroutbandIpAddress | read-only | mandatory | This object defines the IP address of the probe over the current out of band interface: asynchronous ppp, ethernet, or synchronous ppp over ISDN. |
| 1.3.6.1.4.1.568.8.1.7.4 | ScalarrouterIpAddress | read-only | mandatory | This object defines the default gateway or next-hop IP address which is used when no route is found. |
| 1.3.6.1.4.1.568.8.1.7.5 | ScalarsubnetmaskIpAddress | read-only | mandatory | This object defines the network Id portion of our inbandIpAddress or outbandIpAddress. |
| 1.3.6.1.4.1.568.8.2 | NodeprobeStat | |||
| 1.3.6.1.4.1.568.8.2 | NodepvcNotAvailDTE | This trap is generated when a PVC's unavailability is exceed the preset threshold due to the local DTE fault. | ||
| 1.3.6.1.4.1.568.8.2.1 | NodechStCurrent | |||
| 1.3.6.1.4.1.568.8.2.1.1 | Scalardte-frames-ch-curr | read-only | mandatory | Identifies total frames received from DTE device within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.1.2 | Scalardce-frames-ch-curr | read-only | mandatory | Identifies total frames received from DCE device within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.1.3 | Scalardte-octets-ch-curr | read-only | mandatory | Identifies total octets received from DTE device within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.1.4 | Scalardce-octets-ch-curr | read-only | mandatory | Identifies total octets received from DTE device within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.1.5 | Scalarlmi-enq-tx-ch-curr | read-only | mandatory | Identifies the total number of LMI enquiries sent to DCE within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.1.6 | Scalarlmi-resp-tx-ch-curr | read-only | mandatory | Identifies the total number of LMI responses sent to DTE within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.1.7 | Scalarlmi-enq-rx-ch-curr | read-only | mandatory | Identifies the total number of LMI enquiries from the DTE within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.1.8 | Scalarlmi-resp-rx-ch-curr | read-only | mandatory | Identifies the total number of LMI status responses received from the DCE within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.1.9 | Scalarfecn-frames-ch-curr | read-only | mandatory | Identifies total number of frames with FECN set received within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.1.10 | Scalarbecn-frames-ch-curr | read-only | mandatory | Identifies total number of frames with BECN set received within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.1.11 | Scalarip-tx-ch-curr | read-only | mandatory | Identifies total number of IP packets sent on inband DLCI within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.1.12 | Scalarip-rx-ch-curr | read-only | mandatory | Identifies total number of IP packets received on inband DLCI within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.1.13 | Scalarpoll-tx-ch-curr | read-only | mandatory | Identifies total number of probe polls sent to DCE within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.1.14 | Scalarresp-tx-ch-curr | read-only | mandatory | Identifies total number of probe responses sent to DCE within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.1.15 | Scalarpoll-rx-ch-curr | read-only | mandatory | Identifies total number of probe polls received from DCE within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.1.16 | Scalarresp-rx-ch-curr | read-only | mandatory | Identifies total number of probe responses received from DCE within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.2 | TablechStInterval-Table | not-accessible | mandatory | probe statistic table, row 1 to row 96, which defines the time interval for every 15 minutes. |
| 1.3.6.1.4.1.568.8.2.2.1 | RowchStInterval-Entry | not-accessible | mandatory | Identifies an entry (row) in probe statistic table. |
| 1.3.6.1.4.1.568.8.2.2.1.1 | ColumnchStIntv-index | read-only | mandatory | Identifies an entry (row) in channel statistic table, 1-96 time intervals. |
| 1.3.6.1.4.1.568.8.2.2.1.2 | Columndte-frames-ch-intv | read-only | mandatory | Identifies total frames received from DTE device within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.2.1.3 | Columndce-frames-ch-intv | read-only | mandatory | Identifies total frames received from DCE device within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.2.1.4 | Columndte-octets-ch-intv | read-only | mandatory | Identifies total octets received from DTE device within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.2.1.5 | Columndce-octets-ch-intv | read-only | mandatory | Identifies total octets received from DTE device within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.2.1.6 | Columnlmi-enq-tx-ch-intv | read-only | mandatory | Identifies the total number of LMI enquiries sent to DCE within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.2.1.7 | Columnlmi-resp-tx-ch-intv | read-only | mandatory | Identifies the total number of LMI responses send to DTE within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.2.1.8 | Columnlmi-enq-rx-ch-intv | read-only | mandatory | Identifies the total number of LMI enquiries received within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.2.1.9 | Columnlmi-resp-rx-ch-intv | read-only | mandatory | Identifies the total number of LMI status responses received from the DCE within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.2.1.10 | Columnfecn-frames-ch-intv | read-only | mandatory | Identifies total number of frames with FECN set received within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.2.1.11 | Columnbecn-frames-ch-intv | read-only | mandatory | Identifies total number of frames with BECN set received within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.2.1.12 | Columnip-tx-ch-intv | read-only | mandatory | Identifies total number of IP packets sent on inband DLCI within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.2.1.13 | Columnip-rx-ch-intv | read-only | mandatory | Identifies total number of IP packets received on inband DLCI within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.2.1.14 | Columnpoll-tx-ch-intv | read-only | mandatory | Identifies total number of probe polls sent to DCE within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.2.1.15 | Columnresp-tx-ch-intv | read-only | mandatory | Identifies total number of probe response sent to DCE within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.2.1.16 | Columnpoll-rx-ch-intv | read-only | mandatory | Identifies total number of probe polls received from DCE within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.2.1.17 | Columnresp-rx-ch-intv | read-only | mandatory | Identifies total number of probe responses received from DCE within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.3 | TablepvcStCurrent-Table | not-accessible | mandatory | PVC statistic table. |
| 1.3.6.1.4.1.568.8.2.3.1 | RowpvcStCurrent-Entry | not-accessible | mandatory | Identifies an entry (row) in PVC statistic table |
| 1.3.6.1.4.1.568.8.2.3.1.1 | Columnpvc-number-index-curr | read-only | mandatory | Index in PVC statistics table, which identifies the PVC number, up to 20 PVCs can exist. |
| 1.3.6.1.4.1.568.8.2.3.1.2 | Columndte-frames-pvc-curr | read-only | mandatory | Identifies total frames received from DTE device for a specific PVC within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.3.1.3 | Columndce-frames-pvc-curr | read-only | mandatory | Identifies total frames received from DCE device for a specific PVC within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.3.1.4 | Columndte-octets-pvc-curr | read-only | mandatory | Identifies total octets received from DTE device for a specific PVC within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.3.1.5 | Columndce-octets-pvc-curr | read-only | mandatory | Identifies total octets received from DTE device for a specific PVC within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.3.1.6 | Columndte-frames-with-DE-pvc-curr | read-only | mandatory | Identifies total frames with DE bit set received from DTE device for a specific PVC within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.3.1.7 | Columndce-frames-with-DE-pvc-curr | read-only | mandatory | Identifies total frames with DE bit set received from DCE device for a specific PVC within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.3.1.8 | Columnfecn-frames-pvc-curr | read-only | mandatory | Identifies total number of frames for a specific PVC with FECN set received within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.3.1.9 | Columnbecn-frames-pvc-curr | read-only | mandatory | Identifies total number of frames for a specific PVC with BECN set received within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.3.1.10 | Columnpoll-tx-pvc-curr | read-only | mandatory | Identifies total number of probe polls sent to DCE within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.3.1.11 | Columnresp-tx-pvc-curr | read-only | mandatory | Identifies total number of probe responses sent to DCE within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.3.1.12 | Columnpoll-rx-pvc-curr | read-only | mandatory | Identifies total number of probe polls received from DCE on a specific PVC within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.3.1.13 | Columnresp-rx-pvc-curr | read-only | mandatory | Identifies total number of probe responses received from DCE on a specific PVC within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.3.1.14 | Columnpvc-loop-curr | read-only | mandatory | Identifies whether the specific PVC has been found to be in a loop back state by link probe's generator process. |
| 1.3.6.1.4.1.568.8.2.3.1.15 | Columnip-poll-tx-pvc-curr | read-only | mandatory | Identifies total number of probe IP polls sent to ethernet within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.3.1.16 | Columnip-resp-tx-pvc-curr | read-only | mandatory | Identifies total number of probe IP responses sent to ethernet within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.3.1.17 | Columnip-poll-rx-pvc-curr | read-only | mandatory | Identifies total number of probe IP polls received from ethernet on a specific PVC within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.3.1.18 | Columnip-resp-rx-pvc-curr | read-only | mandatory | Identifies total number of probe IP responses received from ethernet on a specific PVC within current 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.3.1.19 | ColumnipRtrRxLatTxPvcCurr | read-only | mandatory | Identifies total number of Router Receive Latency IP packets transmitted out the To-Dte port within current 15 minute interval. |
| 1.3.6.1.4.1.568.8.2.3.1.20 | ColumnipRtrRxLatRxPvcCurr | read-only | mandatory | Identifies total number of Router Receive Latency IP packets received at the Ethernet port within current 15 minute interval. |
| 1.3.6.1.4.1.568.8.2.3.1.21 | ColumnipRtrTxLatTxPvcCurr | read-only | mandatory | Identifies total number of Router Transmit Latency IP packets transmitted out the Ethernet port within current 15 minute interval. |
| 1.3.6.1.4.1.568.8.2.3.1.22 | ColumnipRtrTxLatRxPvcCurr | read-only | mandatory | Identifies total number of Router Transmit Latency IP packets received at the To-Dte port within current 15 minute interval. |
| 1.3.6.1.4.1.568.8.2.4 | TablepvcStInterval-Table | not-accessible | mandatory | PVC statistic interval table: |
| 1.3.6.1.4.1.568.8.2.4.1 | RowpvcStInterval-Entry | not-accessible | mandatory | Identifies an entry (row) in pvc statistic table |
| 1.3.6.1.4.1.568.8.2.4.1.1 | Columnpvc-number-index-intv | read-only | mandatory | The index value which uniquely identifies the PVC number to which this entry is applicable. |
| 1.3.6.1.4.1.568.8.2.4.1.2 | ColumnpvcStIntv-index | read-only | mandatory | A number between 1 and 96, where 1 is the most recently completed 15 minutes interval and 96 is the least recently completed 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.4.1.3 | Columndte-frames-pvc-intv | read-only | mandatory | Identifies total frames received from DTE device for a specific PVC within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.4.1.4 | Columndce-frames-pvc-intv | read-only | mandatory | Identifies total frames received from DCE device for a specific PVC within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.4.1.5 | Columndte-octets-pvc-intv | read-only | mandatory | Identifies total octets received from DTE device for a specific PVC within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.4.1.6 | Columndce-octets-pvc-intv | read-only | mandatory | Identifies total octets received from DTE device for a specific PVC within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.4.1.7 | Columndte-frames-with-DE-pvc-intv | read-only | mandatory | Identifies the frames with DE bit set received from DTE device for a specific PVC within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.4.1.8 | Columndce-frames-with-DE-pvc-intv | read-only | mandatory | Identifies the frames with DE bit set received from DCE device for a specific PVC within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.4.1.9 | Columnfecn-frames-pvc-intv | read-only | mandatory | Identifies total number of frames for a specific PVC with FECN set received within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.4.1.10 | Columnbecn-frames-pvc-intv | read-only | mandatory | Identifies total number of frames for a specific PVC with BECN set received within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.4.1.11 | Columnpoll-tx-pvc-intv | read-only | mandatory | Identifies total number of probe polls sent to DCE within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.4.1.12 | Columnresp-tx-pvc-intv | read-only | mandatory | Identifies total number of probe responses sent to DCE within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.4.1.13 | Columnpoll-rx-pvc-intv | read-only | mandatory | Identifies total number of probe polls received from DCE on a specific PVC within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.4.1.14 | Columnresp-rx-pvc-intv | read-only | mandatory | Identifies total number of probe responses received from DCE on a specific PVC within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.4.1.15 | Columnpvc-loop-intv | read-only | mandatory | Identifies whether the specific PVC has been found to be in a loop back state by link probe's generator process. |
| 1.3.6.1.4.1.568.8.2.4.1.16 | Columnip-poll-tx-pvc-intv | read-only | mandatory | Identifies total number of probe IP polls sent to ethernet within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.4.1.17 | Columnip-resp-tx-pvc-intv | read-only | mandatory | Identifies total number of probe IP responses sent to ethernet within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.4.1.18 | Columnip-poll-rx-pvc-intv | read-only | mandatory | Identifies total number of probe IP polls received from ethernet on a specific PVC within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.4.1.19 | Columnip-resp-rx-pvc-intv | read-only | mandatory | Identifies total number of probe IP responses received from ethernet on a specific PVC within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.2.4.1.20 | ColumnipRtrRxLatTxPvcIntv | read-only | mandatory | Identifies total number of Router Receive Latency IP packets transmitted out the To-Dte port within a 15 minute interval. |
| 1.3.6.1.4.1.568.8.2.4.1.21 | ColumnipRtrRxLatRxPvcIntv | read-only | mandatory | Identifies total number of Router Receive Latency IP packets received at the Ethernet port within a 15 minute interval. |
| 1.3.6.1.4.1.568.8.2.4.1.22 | ColumnipRtrTxLatTxPvcIntv | read-only | mandatory | Identifies total number of Router Transmit Latency IP packets transmitted out the Ethernet port within a 15 minute interval. |
| 1.3.6.1.4.1.568.8.2.4.1.23 | ColumnipRtrTxLatRxPvcIntv | read-only | mandatory | Identifies total number of Router Transmit Latency IP packets received at the To-Dte port within a 15 minute interval. |
| 1.3.6.1.4.1.568.8.3 | NodeprobePerform | |||
| 1.3.6.1.4.1.568.8.3 | NodepvcRTD | This trap is generated when a PVC's average round trap delay (RTD) is exceed the preset threshold. | ||
| 1.3.6.1.4.1.568.8.3.1 | NodechanPerfCurr | |||
| 1.3.6.1.4.1.568.8.3.1.1 | Scalarchan-unvail-toDte-curr | read-only | mandatory | This object identifies the channel unavailability due to remote DTE fault within the latest 15 minutes. This statistical data is calculated by the channel unav… |
| 1.3.6.1.4.1.568.8.3.1.2 | Scalarchan-unavail-toDce-curr | read-only | mandatory | This object identifies the channel unavailability due to local DTE fault within the latest 15 minutes. This statistical data is calculated by the channel unava… |
| 1.3.6.1.4.1.568.8.3.1.3 | Scalarchan-user-load-tx-curr | read-only | mandatory | channel average user tx load within the latest 15 minutes, this statistical data is calculated by user data octets sent by the channel within the 15 minutes ov… |
| 1.3.6.1.4.1.568.8.3.1.4 | Scalarchan-user-load-rx-curr | read-only | mandatory | channel average user rx load within the latest 15 minutes, this statistical data is calculated by user data octets received by the channel within the 15 minute… |
| 1.3.6.1.4.1.568.8.3.1.5 | Scalarchan-total-load-tx-curr | read-only | mandatory | channel total tx load within the latest 15 minutes, this statistical data is calculated by the total data octets sent by the channel within the 15 minutes over… |
| 1.3.6.1.4.1.568.8.3.1.6 | Scalarchan-total-load-rx-curr | read-only | mandatory | channel total rx load within the latest 15 minutes, this statistical data is calculated by total data octets received by the channel within the 15 minutes over… |
| 1.3.6.1.4.1.568.8.3.2 | TablechanPerfIntv-Table | not-accessible | mandatory | Probe channel performance table, which displays the performance statistical data based on the probe channel within previous 24 hours. |
| 1.3.6.1.4.1.568.8.3.2.1 | RowchanPerfIntv-Entry | not-accessible | mandatory | Identifies an entry (row) in probe channel performance table. |
| 1.3.6.1.4.1.568.8.3.2.1.1 | ColumnchanPerfIntv-index | read-only | mandatory | Identifies an entry (row) in historical PVC performance table, total 96 time intervals, where 1 is the most recently completed 15 minutes interval and 96 is th… |
| 1.3.6.1.4.1.568.8.3.2.1.2 | Columnchan-unavail-toDte-intv | read-only | mandatory | This object identifies the channel unavailability due to remote DTE fault within a 15 minutes interval. This statistical data is calculated by the channel unav… |
| 1.3.6.1.4.1.568.8.3.2.1.3 | Columnchan-unavail-toDce-intv | read-only | mandatory | This object identifies the channel unavailability due to local DTE fault within a 15 minutes interval. This statistical data is calculated by the channel unava… |
| 1.3.6.1.4.1.568.8.3.2.1.4 | Columnchan-user-load-tx-intv | read-only | mandatory | channel average user tx load within a 15 minutes interval, this statistical data is calculated by user data octets sent by the channel within the 15 minutes ov… |
| 1.3.6.1.4.1.568.8.3.2.1.5 | Columnchan-user-load-rx-intv | read-only | mandatory | channel average user rx load within a 15 minutes interval, this statistical data is calculated by user data octets received by the channel within the 15 minute… |
| 1.3.6.1.4.1.568.8.3.2.1.6 | Columnchan-total-load-tx-intv | read-only | mandatory | channel total tx load within a 15 minutes interval, this statistical data is calculated by the total data octets sent by the channel within the 15 minutes over… |
| 1.3.6.1.4.1.568.8.3.2.1.7 | Columnchan-total-load-rx-intv | read-only | mandatory | Channel total rx load within a 15 minutes interval, this statistical data is calculated by the total data octets received by the channel within the 15 minutes … |
| 1.3.6.1.4.1.568.8.3.2.1.8 | Columnchan-min-user-load-tx-intv | read-only | mandatory | Minimum chan-user-load-tx within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.2.1.9 | Columnchan-min-user-load-tx-time-intv | read-only | mandatory | Timestamp of when the minimum chan-user-load-tx within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.2.1.10 | Columnchan-min-user-load-rx-intv | read-only | mandatory | Minimum chan-user-load-rx within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.2.1.11 | Columnchan-min-user-load-rx-time-intv | read-only | mandatory | Timestamp of when the minimum chan-user-load-rx within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.2.1.12 | Columnchan-min-total-load-tx-intv | read-only | mandatory | Minimum chan-total-load-tx within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.2.1.13 | Columnchan-min-total-load-tx-time-intv | read-only | mandatory | Timestamp of when the minimum chan-total-load-tx within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.2.1.14 | Columnchan-min-total-load-rx-intv | read-only | mandatory | Minimum chan-total-load-rx within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.2.1.15 | Columnchan-min-total-load-rx-time-intv | read-only | mandatory | Timestamp of when the minimum chan-total-load-rx within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.2.1.16 | Columnchan-max-user-load-tx-intv | read-only | mandatory | Maximum chan-user-load-tx within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.2.1.17 | Columnchan-max-user-load-tx-time-intv | read-only | mandatory | Timestamp of when the maximum chan-user-load-tx within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.2.1.18 | Columnchan-max-user-load-rx-intv | read-only | mandatory | Maximum chan-user-load-rx within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.2.1.19 | Columnchan-max-user-load-rx-time-intv | read-only | mandatory | Timestamp of when the maximum chan-user-load-rx within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.2.1.20 | Columnchan-max-total-load-tx-intv | read-only | mandatory | Maximum chan-total-load-tx within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.2.1.21 | Columnchan-max-total-load-tx-time-intv | read-only | mandatory | Timestamp of when the maximum chan-total-load-tx within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.2.1.22 | Columnchan-max-total-load-rx-intv | read-only | mandatory | Maximum chan-total-load-rx within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.2.1.23 | Columnchan-max-total-load-rx-time-intv | read-only | mandatory | Timestamp of when the maximum chan-total-load-rx within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.3 | TablepvcPerfCurr-Table | not-accessible | mandatory | PVC performance table, which displays the performance statistical data based on each PVC. |
| 1.3.6.1.4.1.568.8.3.3.1 | RowpvcPerfCurr-Entry | not-accessible | mandatory | Identifies an entry (row) in pvc statistic table |
| 1.3.6.1.4.1.568.8.3.3.1.1 | ColumnpvcPerfCurr-num-index | read-only | mandatory | The index value which uniquely identifies the PVC number to which this entry is applicable. |
| 1.3.6.1.4.1.568.8.3.3.1.2 | Columnpvc-tx-time-curr | read-only | mandatory | Probe token average round trip time within the latest 15 minutes for a specific PVC. A -1 value indicates data is Not-Avail. |
| 1.3.6.1.4.1.568.8.3.3.1.3 | Columnpvc-unavail-toDte | read-only | mandatory | This object identifies the PVC average unavailability within the latest 15 minutes. This statistical data is calculated by a PVC unavailable time due to the ne… |
| 1.3.6.1.4.1.568.8.3.3.1.4 | Columnpvc-unavail-toDce | read-only | mandatory | This object identifies the PVC average unavailability within the latest 15 minutes. This statistical data is calculated by a PVC unavailable time due to the lo… |
| 1.3.6.1.4.1.568.8.3.3.1.5 | Columnpvc-user-load-tx-curr | read-only | mandatory | This object identifies the PVC average user tx load within the latest 15 minutes. This statistical data is calculated by user data octets sent by a specific PV… |
| 1.3.6.1.4.1.568.8.3.3.1.6 | Columnpvc-user-load-rx-curr | read-only | mandatory | This object identifies the PVC average user rx load within the latest 15 minutes. This statistical data is calculated by user data octets received by a specifi… |
| 1.3.6.1.4.1.568.8.3.3.1.7 | Columnpvc-total-load-tx-curr | read-only | mandatory | This object identifies the PVC total tx load within the latest 15 minutes. This statistical data is calculated by total data octets sent by a specific PVC with… |
| 1.3.6.1.4.1.568.8.3.3.1.8 | Columnpvc-total-load-rx-curr | read-only | mandatory | This object identifies the PVC total rx load within the latest 15 minutes. This statistical data is calculated by total data octets received by a specific PVC … |
| 1.3.6.1.4.1.568.8.3.3.1.9 | Columnpvc-CIR-toNet-exceed-curr | read-only | mandatory | This object identifies the number of exceeding CIR times that the network detected within the current interval. The measurement is done for every Tc, and the d… |
| 1.3.6.1.4.1.568.8.3.3.1.10 | Columnpvc-EIR-toNet-exceed-curr | read-only | mandatory | This object identifies the number of exceeding EIR times that the network detected within the current interval. The measurement is done for every Tc, and the d… |
| 1.3.6.1.4.1.568.8.3.3.1.11 | Columnpvc-loss-frame-tx-curr | read-only | mandatory | This object identifies the percentage of tx loss of frames within the total tx frames for this PVC. A -1 value indicates data is Not-Avail. |
| 1.3.6.1.4.1.568.8.3.3.1.12 | Columnpvc-loss-frame-rx-curr | read-only | mandatory | This object identifies the percentage of rx loss of frames within the total rx frames for this PVC. A -1 value indicates data is Not-Avail. |
| 1.3.6.1.4.1.568.8.3.3.1.13 | Columnpvc-ip-tx-time-curr | read-only | mandatory | Probe token average round trip time via ethernet and using UDP/IP packets within the latest 15 minutes for a specific PVC. A -1 value indicates data is Not-Ava… |
| 1.3.6.1.4.1.568.8.3.3.1.14 | ColumnpvcIpRtrRxLatTxTimeCurr | read-only | mandatory | Router Receive Latency IP Packet average round trip time from first byte transmitted out the To-Dte port, to the last byte received on the Ethernet port, withi… |
| 1.3.6.1.4.1.568.8.3.3.1.15 | ColumnpvcIpRtrTxLatTxTimeCurr | read-only | mandatory | Router Transmit Latency IP Packet average round trip time from first byte transmitted out the Ethernet port, to the last byte received on the To-Dte port, with… |
| 1.3.6.1.4.1.568.8.3.4 | TablepvcPerfIntv-Table | not-accessible | mandatory | PVC performance interval table, which displays the performance statistical data based on each PVC in previous 24 hours. |
| 1.3.6.1.4.1.568.8.3.4.1 | RowpvcPerfIntv-Entry | not-accessible | mandatory | Identifies an entry (row) in pvc statistic table |
| 1.3.6.1.4.1.568.8.3.4.1.1 | ColumnpvcPerfIntv-num-index | read-only | mandatory | The index value which uniquely identifies the PVC number to which this entry is applicable. |
| 1.3.6.1.4.1.568.8.3.4.1.2 | ColumnpvcPerf-intv-index | read-only | mandatory | Identifies an entry (row) in PVC performance table, with total 96 time intervals, where 1 is the most recently completed 15 minutes interval and 96 is the leas… |
| 1.3.6.1.4.1.568.8.3.4.1.3 | Columnpvc-tx-time-intv | read-only | mandatory | Probe token average round trip time within a 15 minutes interval for a specific PVC. A -1 value indicates data is Not-Avail. |
| 1.3.6.1.4.1.568.8.3.4.1.4 | Columnpvc-unavail-toDte-intv | read-only | mandatory | This object identifies the PVC average unavailability within a 15 minutes interval. This statistical data is calculated by a PVC unavailable time due to the ne… |
| 1.3.6.1.4.1.568.8.3.4.1.5 | Columnpvc-unavail-toDce-intv | read-only | mandatory | This object identifies the PVC average unavailability within a 15 minutes interval. This statistical data is calculated by a PVC unavailable time due to the lo… |
| 1.3.6.1.4.1.568.8.3.4.1.6 | Columnpvc-user-load-tx-intv | read-only | mandatory | This object identifies the PVC average user tx load within a 15 minutes interval. This statistical data is calculated by user data octets sent by a specific PV… |
| 1.3.6.1.4.1.568.8.3.4.1.7 | Columnpvc-user-load-rx-intv | read-only | mandatory | This object identifies the PVC average user rx load within a 15 minutes interval. This statistical data is calculated by user data octets received by a specifi… |
| 1.3.6.1.4.1.568.8.3.4.1.8 | Columnpvc-total-load-tx-intv | read-only | mandatory | This object identifies the PVC total tx load within a 15 minutes interval. This statistical data is calculated by total data octets sent by a specific PVC with… |
| 1.3.6.1.4.1.568.8.3.4.1.9 | Columnpvc-total-load-rx-intv | read-only | mandatory | This object identifies the PVC total rx load within a 15 minutes interval. This statistical data is calculated by total data octets received by a specific PVC … |
| 1.3.6.1.4.1.568.8.3.4.1.10 | Columnpvc-CIR-toNet-exceed-intv | read-only | mandatory | This object identifies the number of exceeding CIR times that the network detected within an interval. The measurement is done for every Tc, and the direction … |
| 1.3.6.1.4.1.568.8.3.4.1.11 | Columnpvc-EIR-toNet-exceed-intv | read-only | mandatory | This object identifies the number of exceeding EIR times that the network detected within an interval. The measurement is done for every Tc, and the direction … |
| 1.3.6.1.4.1.568.8.3.4.1.12 | Columnpvc-loss-frame-tx-intv | read-only | mandatory | This object identifies the percentage of tx loss of frames within the total tx frames for this PVC in this interval. |
| 1.3.6.1.4.1.568.8.3.4.1.13 | Columnpvc-loss-frame-rx-intv | read-only | mandatory | This object identifies the percentage of rx loss of frames within the total rx frames for this PVC in this interval. |
| 1.3.6.1.4.1.568.8.3.4.1.14 | Columnpvc-ip-tx-time-intv | read-only | mandatory | Probe token average round trip time via ethernet and using UDP/IP packets within a 15 minutes interval for a specific PVC. A -1 value indicates data is Not-Ava… |
| 1.3.6.1.4.1.568.8.3.4.1.15 | ColumnpvcIpRtrRxLatTxTimeIntv | read-only | mandatory | Router Receive Latency IP Packet average round trip time from first byte transmitted out the To-Dte port, to the last byte received on the Ethernet port, withi… |
| 1.3.6.1.4.1.568.8.3.4.1.16 | ColumnpvcIpRtrTxLatTxTimeIntv | read-only | mandatory | Router Transmit Latency IP Packet average round trip time from first byte transmitted out the Ethernet port, to the last byte received on the To-Dte port, with… |
| 1.3.6.1.4.1.568.8.3.4.1.17 | Columnpvc-min-tx-time-intv | read-only | mandatory | Minimum pvc-tx-time within a 15 minutes interval for a specific PVC. |
| 1.3.6.1.4.1.568.8.3.4.1.18 | Columnpvc-min-tx-time-time-intv | read-only | mandatory | Timestamp of when the minimum pvc-tx-time within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.4.1.19 | Columnpvc-min-user-load-tx-intv | read-only | mandatory | Minimum pvc-user-load-tx within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.4.1.20 | Columnpvc-min-user-load-tx-time-intv | read-only | mandatory | Timestamp of when the minimum pvc-user-load-tx within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.4.1.21 | Columnpvc-min-user-load-rx-intv | read-only | mandatory | Minimum pvc-user-load-rx within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.4.1.22 | Columnpvc-min-user-load-rx-time-intv | read-only | mandatory | Timestamp of when the minimum pvc-user-load-rx within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.4.1.23 | Columnpvc-min-total-load-tx-intv | read-only | mandatory | Minimum pvc-total-load-tx within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.4.1.24 | Columnpvc-min-total-load-tx-time-intv | read-only | mandatory | Timestamp of when the minimum pvc-total-load-tx within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.4.1.25 | Columnpvc-min-total-load-rx-intv | read-only | mandatory | Minimum pvc-total-load-rx within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.4.1.26 | Columnpvc-min-total-load-rx-time-intv | read-only | mandatory | Timestamp of when the minimum pvc-total-load-rx within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.4.1.27 | Columnpvc-min-ip-tx-time-intv | read-only | mandatory | Minimum pvc-ip-tx-time within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.4.1.28 | Columnpvc-min-ip-tx-time-time-intv | read-only | mandatory | Timestamp of when the minimum pvc-ip-tx-time within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.4.1.29 | Columnpvc-max-tx-time-intv | read-only | mandatory | Maximum pvc-tx-time within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.4.1.30 | Columnpvc-max-tx-time-time-intv | read-only | mandatory | Timestamp of when the maximum pvc-tx-time within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.4.1.31 | Columnpvc-max-user-load-tx-intv | read-only | mandatory | Maximum pvc-user-load-tx within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.4.1.32 | Columnpvc-max-user-load-tx-time-intv | read-only | mandatory | Timestamp of when the maximum pvc-user-load-tx within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.4.1.33 | Columnpvc-max-user-load-rx-intv | read-only | mandatory | Maximum pvc-user-load-rx within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.4.1.34 | Columnpvc-max-user-load-rx-time-intv | read-only | mandatory | Timestamp of when the maximum pvc-user-load-rx within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.4.1.35 | Columnpvc-max-total-load-tx-intv | read-only | mandatory | Maximum pvc-total-load-tx within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.4.1.36 | Columnpvc-max-total-load-tx-time-intv | read-only | mandatory | Timestamp of when the maximum pvc-total-load-tx within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.4.1.37 | Columnpvc-max-total-load-rx-intv | read-only | mandatory | Maximum pvc-total-load-rx within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.4.1.38 | Columnpvc-max-total-load-rx-time-intv | read-only | mandatory | Timestamp of when the maximum pvc-total-load-rx within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.3.4.1.39 | Columnpvc-max-ip-tx-time-intv | read-only | mandatory | Maximum pvc-ip-tx-time within a 15 minutes interval. |
| 1.3.6.1.4.1.568.8.3.4.1.40 | Columnpvc-max-ip-tx-time-time-intv | read-only | mandatory | Timestamp of when the maximum pvc-ip-tx-time within a 15 minutes interval occurred. |
| 1.3.6.1.4.1.568.8.4 | NodefrChanUtilizeToDTE | This trap is generated when channel utilization to DTE direction is exceed the preset threshold. | ||
| 1.3.6.1.4.1.568.8.4 | NodeprobeTrafficShape | |||
| 1.3.6.1.4.1.568.8.4.1 | NodepvcShapeThresh | |||
| 1.3.6.1.4.1.568.8.4.1.1 | ScalarpvcShapeThreshLevel-1 | read-only | mandatory | This parameter defines the maximum percentage of PVC traffic (measured in TC) within this PVC CIR in shape level 1 (currently is 10%). |
| 1.3.6.1.4.1.568.8.4.1.2 | ScalarpvcShapeThreshLevel-2 | read-only | mandatory | This parameter defines the maximum percentage of PVC traffic (measured in TC) within this PVC CIR in shape level 2 (currently is 25%). |
| 1.3.6.1.4.1.568.8.4.1.3 | ScalarpvcShapeThreshLevel-3 | read-only | mandatory | This parameter defines the maximum percentage of PVC traffic (measured in TC) within this PVC CIR in shape level 3 (currently is 45%). |
| 1.3.6.1.4.1.568.8.4.1.4 | ScalarpvcShapeThreshLevel-4 | read-only | mandatory | This parameter defines the maximum percentage of PVC traffic (measured in TC) within this PVC CIR in shape level 4 (currently is 75%). |
| 1.3.6.1.4.1.568.8.4.1.5 | ScalarpvcShapeThreshLevel-5 | read-only | mandatory | This parameter defines the maximum percentage of PVC traffic (measured in TC) within this PVC CIR in shape level 5 (currently is 90%). |
| 1.3.6.1.4.1.568.8.4.1.6 | ScalarpvcShapeThreshLevel-6 | read-only | mandatory | This parameter defines the maximum percentage of PVC traffic (measured in TC) within this PVC CIR in shape level 6 (currently is 100%). |
| 1.3.6.1.4.1.568.8.4.1.7 | ScalarpvcShapeThreshLevel-7 | read-only | mandatory | This parameter defines the maximum percentage of PVC traffic (measured in TC) within this PVC CIR in shape level 7 (currently is more than 100%). |
| 1.3.6.1.4.1.568.8.4.2 | TablepvcShapeCurrToDce-Table | not-accessible | mandatory | PVC current traffic shape to DCE table, which displays the traffic shape information based on each PVC. |
| 1.3.6.1.4.1.568.8.4.2.1 | RowpvcShapeCurrToDce-Entry | not-accessible | mandatory | Identifies an entry (row) in pvc current traffic shape to DCE table |
| 1.3.6.1.4.1.568.8.4.2.1.1 | ColumnpvcShapeCurrToDce-index | read-only | mandatory | The index value which uniquely identifies the PVC number to which this entry is applicable. |
| 1.3.6.1.4.1.568.8.4.2.1.2 | ColumnpvcShapeCurrToDceLevel-1 | read-only | mandatory | This object identifies the percentage of traffic in level one in current 15 minutes to the direction of DCE. |
| 1.3.6.1.4.1.568.8.4.2.1.3 | ColumnpvcShapeCurrToDceLevel-2 | read-only | mandatory | This object identifies the percentage of traffic in level two in current 15 minutes to the direction of DCE. |
| 1.3.6.1.4.1.568.8.4.2.1.4 | ColumnpvcShapeCurrToDceLevel-3 | read-only | mandatory | This object identifies the percentage of traffic in level three in current 15 minutes to the direction of DCE. |
| 1.3.6.1.4.1.568.8.4.2.1.5 | ColumnpvcShapeCurrToDceLevel-4 | read-only | mandatory | This object identifies the percentage of traffic in level four in current 15 minutes to the direction of DCE. |
| 1.3.6.1.4.1.568.8.4.2.1.6 | ColumnpvcShapeCurrToDceLevel-5 | read-only | mandatory | This object identifies the percentage of traffic in level five in current 15 minutes to the direction of DCE. |
| 1.3.6.1.4.1.568.8.4.2.1.7 | ColumnpvcShapeCurrToDceLevel-6 | read-only | mandatory | This object identifies the percentage of traffic in level six in current 15 minutes to the direction of DCE. |
| 1.3.6.1.4.1.568.8.4.2.1.8 | ColumnpvcShapeCurrToDceLevel-7 | read-only | mandatory | This object identifies the percentage of traffic in level seven in current 15 minutes to the direction of DCE. |
| 1.3.6.1.4.1.568.8.4.3 | TablepvcShapeCurrToDte-Table | not-accessible | mandatory | PVC current traffic shape table, which displays the traffic shape information based on each PVC. |
| 1.3.6.1.4.1.568.8.4.3.1 | RowpvcShapeCurrToDte-Entry | not-accessible | mandatory | Identifies an entry (row) in pvc current traffic shape to DTE table |
| 1.3.6.1.4.1.568.8.4.3.1.1 | ColumnpvcShapeCurrToDte-index | read-only | mandatory | The index value which uniquely identifies the PVC number to which this entry is applicable. |
| 1.3.6.1.4.1.568.8.4.3.1.2 | ColumnpvcShapeCurrToDteLevel-1 | read-only | mandatory | This object identifies the percentage of traffic in level one in current 15 minutes to the direction of DTE. |
| 1.3.6.1.4.1.568.8.4.3.1.3 | ColumnpvcShapeCurrToDteLevel-2 | read-only | mandatory | This object identifies the percentage of traffic in level two in current 15 minutes to the direction of DTE. |
| 1.3.6.1.4.1.568.8.4.3.1.4 | ColumnpvcShapeCurrToDteLevel-3 | read-only | mandatory | This object identifies the percentage of traffic in level three in current 15 minutes to the direction of DTE. |
| 1.3.6.1.4.1.568.8.4.3.1.5 | ColumnpvcShapeCurrToDteLevel-4 | read-only | mandatory | This object identifies the percentage of traffic in level four in current 15 minutes to the direction of DTE. |
| 1.3.6.1.4.1.568.8.4.3.1.6 | ColumnpvcShapeCurrToDteLevel-5 | read-only | mandatory | This object identifies the percentage of traffic in level five in current 15 minutes to the direction of DTE. |
| 1.3.6.1.4.1.568.8.4.3.1.7 | ColumnpvcShapeCurrToDteLevel-6 | read-only | mandatory | This object identifies the percentage of traffic in level six in current 15 minutes to the direction of DTE. |
| 1.3.6.1.4.1.568.8.4.3.1.8 | ColumnpvcShapeCurrToDteLevel-7 | read-only | mandatory | This object identifies the percentage of traffic in level seven in current 15 minutes to the direction of DTE. |
| 1.3.6.1.4.1.568.8.4.4 | TablepvcShapeIntvToDce-Table | not-accessible | mandatory | PVC shape to DCE interval table, which displays the pvc traffic shape information to the direction of DCE within 24 hours. |
| 1.3.6.1.4.1.568.8.4.4.1 | RowpvcShapeIntvToDce-Entry | not-accessible | mandatory | Identifies an entry (row) in pvc traffic shape to DCE interval table |
| 1.3.6.1.4.1.568.8.4.4.1.1 | ColumnpvcShapeIntvToDce-pvcIx | read-only | mandatory | The index value which uniquely identifies the PVC number to which this entry is applicable. |
| 1.3.6.1.4.1.568.8.4.4.1.2 | ColumnpvcShapeIntvToDce-intvIx | read-only | mandatory | The index value which uniquely identifies the interval number to which this entry is applicable. |
| 1.3.6.1.4.1.568.8.4.4.1.3 | ColumnpvcShapeIntvToDceLevel-1 | read-only | mandatory | This object identifies the percentage of traffic in level one within a specific 15-minutes interval in the direction of DCE. |
| 1.3.6.1.4.1.568.8.4.4.1.4 | ColumnpvcShapeIntvToDceLevel-2 | read-only | mandatory | This object identifies the percentage of traffic in level two within a specific 15-minutes interval in the direction of DCE. |
| 1.3.6.1.4.1.568.8.4.4.1.5 | ColumnpvcShapeIntvToDceLevel-3 | read-only | mandatory | This object identifies the percentage of traffic in level three within a specific 15-minutes interval in the direction of DCE. |
| 1.3.6.1.4.1.568.8.4.4.1.6 | ColumnpvcShapeIntvToDceLevel-4 | read-only | mandatory | This object identifies the percentage of traffic in level four within a specific 15-minutes interval in the direction of DCE. |
| 1.3.6.1.4.1.568.8.4.4.1.7 | ColumnpvcShapeIntvToDceLevel-5 | read-only | mandatory | This object identifies the percentage of traffic in level five within a specific 15-minutes interval in the direction of DCE. |
| 1.3.6.1.4.1.568.8.4.4.1.8 | ColumnpvcShapeIntvToDceLevel-6 | read-only | mandatory | This object identifies the percentage of traffic in level six within a specific 15-minutes interval in the direction of DCE. |
| 1.3.6.1.4.1.568.8.4.4.1.9 | ColumnpvcShapeIntvToDceLevel-7 | read-only | mandatory | This object identifies the percentage of traffic in level seven within a specific 15-minutes interval in the direction of DCE. |
| 1.3.6.1.4.1.568.8.4.5 | TablepvcShapeIntvToDte-Table | not-accessible | mandatory | PVC shape to DTE interval table, which displays the pvc traffic information to the direction of DTE within 24 hours. |
| 1.3.6.1.4.1.568.8.4.5.1 | RowpvcShapeIntvToDte-Entry | not-accessible | mandatory | Identifies an entry (row) in pvc traffic shape to DTE interval table |
| 1.3.6.1.4.1.568.8.4.5.1.1 | ColumnpvcShapeIntvToDte-pvcIx | read-only | mandatory | The index value which uniquely identifies the PVC number to which this entry is applicable. |
| 1.3.6.1.4.1.568.8.4.5.1.2 | ColumnpvcShapeIntvToDte-intvIx | read-only | mandatory | The index value which uniquely identifies the interval number to which this entry is applicable. |
| 1.3.6.1.4.1.568.8.4.5.1.3 | ColumnpvcShapeIntvToDteLevel-1 | read-only | mandatory | This object identifies the percentage of traffic in level one within a specific 15-minutes interval in the direction of DTE. |
| 1.3.6.1.4.1.568.8.4.5.1.4 | ColumnpvcShapeIntvToDteLevel-2 | read-only | mandatory | This object identifies the percentage of traffic in level two within a specific 15-minutes interval in the direction of DTE. |
| 1.3.6.1.4.1.568.8.4.5.1.5 | ColumnpvcShapeIntvToDteLevel-3 | read-only | mandatory | This object identifies the percentage of traffic in level three within a specific 15-minutes interval in the direction of DTE. |
| 1.3.6.1.4.1.568.8.4.5.1.6 | ColumnpvcShapeIntvToDteLevel-4 | read-only | mandatory | This object identifies the percentage of traffic in level four within a specific 15-minutes interval in the direction of DTE. |
| 1.3.6.1.4.1.568.8.4.5.1.7 | ColumnpvcShapeIntvToDteLevel-5 | read-only | mandatory | This object identifies the percentage of traffic in level five within a specific 15-minutes interval in the direction of DTE. |
| 1.3.6.1.4.1.568.8.4.5.1.8 | ColumnpvcShapeIntvToDteLevel-6 | read-only | mandatory | This object identifies the percentage of traffic in level six within a specific 15-minutes interval in the direction of DTE. |
| 1.3.6.1.4.1.568.8.4.5.1.9 | ColumnpvcShapeIntvToDteLevel-7 | read-only | mandatory | This object identifies the percentage of traffic in level seven within a specific 15-minutes interval in the direction of DTE. |
| 1.3.6.1.4.1.568.8.5 | NodefrChanUtilizeToDCE | This trap is generated when channel utilization to DCE direction is exceed the preset threshold. | ||
| 1.3.6.1.4.1.568.8.5 | NodeprobeHistorical | |||
| 1.3.6.1.4.1.568.8.5.1 | TablehistIntvStartTimeIntv-Table | not-accessible | mandatory | Probe historical interval start time table, which displays the interval starting time for each interval covering an historical 3 hours. |
| 1.3.6.1.4.1.568.8.5.1.1 | RowhistIntvStartTimeIntv-Entry | not-accessible | mandatory | Identifies an entry (row) in probe interval start time interval table. |
| 1.3.6.1.4.1.568.8.5.1.1.1 | ColumnhistIntvStartTimeIntv-index | read-only | mandatory | Identifies an entry (row) in historical PVC performance table, total 12 time intervals, where 1 is the most recently completed 15 minutes interval and 12 is th… |
| 1.3.6.1.4.1.568.8.5.1.1.2 | Columnhist-intv-start-time | read-only | mandatory | hist-intv-start-time displays the current interval starting time with 4 digits year, 2 digits month, 2 digits date and hours, minutes and seconds, which are ea… |
| 1.3.6.1.4.1.568.8.5.2 | TablehistChanPerfIntv-Table | not-accessible | mandatory | Probe channel performance table, which displays the performance statistical data based on the probe channel covering an historical 3 hours. |
| 1.3.6.1.4.1.568.8.5.2.1 | RowhistChanPerfIntv-Entry | not-accessible | mandatory | Identifies an entry (row) in probe historical channel performance table. |
| 1.3.6.1.4.1.568.8.5.2.1.1 | ColumnhistChanPerfIntv-index | read-only | mandatory | Identifies an entry (row) in historical PVC performance table, total 12 time intervals, where 1 is the most recently completed 15 minutes interval and 12 is th… |
| 1.3.6.1.4.1.568.8.5.2.1.2 | Columnhist-chan-unavail-toDte-intv | read-only | mandatory | This object identifies the channel unavailability due to remote DTE fault within a 15 minute interval. This statistical data is calculated by the channel unava… |
| 1.3.6.1.4.1.568.8.5.2.1.3 | Columnhist-chan-unavail-toDce-intv | read-only | mandatory | This object identifies the channel unavailability due to local DTE fault within a 15 minutes interval. This statistical data is calculated by the channel unava… |
| 1.3.6.1.4.1.568.8.5.2.1.4 | Columnhist-chan-user-load-tx-intv | read-only | mandatory | channel average user tx load within a 15 minute interval, this statistical data is calculated by user data octets sent by the channel within the 15 minutes ove… |
| 1.3.6.1.4.1.568.8.5.2.1.5 | Columnhist-chan-user-load-rx-intv | read-only | mandatory | channel average user rx load within a 15 minute interval, this statistical data is calculated by user data octets received by the channel within the 15 minutes… |
| 1.3.6.1.4.1.568.8.5.3 | TablehistPvcPerfIntv-Table | not-accessible | mandatory | PVC performance interval table, which displays the performance statistical data based on each PVC in an historical 3 hours. |
| 1.3.6.1.4.1.568.8.5.3.1 | RowhistPvcPerfIntv-Entry | not-accessible | mandatory | Identifies an entry (row) in pvc statistic table |
| 1.3.6.1.4.1.568.8.5.3.1.1 | ColumnhistPvcPerfIntv-num-index | read-only | mandatory | The index value which uniquely identifies the PVC number to which this entry is applicable. |
| 1.3.6.1.4.1.568.8.5.3.1.2 | ColumnhistPvcPerf-intv-index | read-only | mandatory | Identifies an entry (row) in historical PVC performance table, total 12 time intervals, where 1 is the most recently completed 15 minutes interval and 12 is th… |
| 1.3.6.1.4.1.568.8.5.3.1.3 | Columnhist-pvc-tx-time-intv | read-only | mandatory | Probe token average round trip time within a 15 minutes interval for a specific PVC. A -1 value indicates data is Not-Avail. |
| 1.3.6.1.4.1.568.8.5.3.1.4 | Columnhist-pvc-unavail-toDte-intv | read-only | mandatory | This object identifies the PVC average unavailability within a 15 minutes interval. This statistical data is calculated by a PVC unavailable time due to the ne… |
| 1.3.6.1.4.1.568.8.5.3.1.5 | Columnhist-pvc-unavail-toDce-intv | read-only | mandatory | This object identifies the PVC average unavailability within a 15 minutes interval. This statistical data is calculated by a PVC unavailable time due to the lo… |
| 1.3.6.1.4.1.568.8.5.3.1.6 | Columnhist-pvc-user-load-tx-intv | read-only | mandatory | This object identifies the PVC average user tx load within a 15 minutes interval. This statistical data is calculated by user data octets sent by a specific PV… |
| 1.3.6.1.4.1.568.8.5.3.1.7 | Columnhist-pvc-user-load-rx-intv | read-only | mandatory | This object identifies the PVC average user rx load within a 15 minutes interval. This statistical data is calculated by user data octets received by a specifi… |
| 1.3.6.1.4.1.568.8.5.3.1.8 | Columnhist-pvc-CIR-toNet-exceed-intv | read-only | mandatory | This object identifies the number of exceeding CIR times that the network detected within an interval. The measurement is done for every Tc, and the direction … |
| 1.3.6.1.4.1.568.8.5.3.1.9 | Columnhist-pvc-loss-frame-tx-intv | read-only | mandatory | This object identifies the percentage of tx loss of frames within the total tx frames for this PVC in this interval. |
| 1.3.6.1.4.1.568.8.5.3.1.10 | Columnhist-pvc-loss-frame-rx-intv | read-only | mandatory | This object identifies the percentage of rx loss of frames within the total rx frames for this PVC in this interval. |
| 1.3.6.1.4.1.568.8.5.4 | TablehistPvcShapeIntvToDce-Table | not-accessible | mandatory | PVC shape to DCE interval table, which displays the pvc traffic shape information to the direction of DCE over 3 previous hours. |
| 1.3.6.1.4.1.568.8.5.4.1 | RowhistPvcShapeIntvToDce-Entry | not-accessible | mandatory | Identifies an entry (row) in pvc traffic shape to DCE interval table |
| 1.3.6.1.4.1.568.8.5.4.1.1 | ColumnhistPvcShapeIntvToDce-pvcIx | read-only | mandatory | The index value which uniquely identifies the PVC number to which this entry is applicable. |
| 1.3.6.1.4.1.568.8.5.4.1.2 | ColumnhistPvcShapeIntvToDce-intvIx | read-only | mandatory | The index value which uniquely identifies the interval number to which this entry is applicable. |
| 1.3.6.1.4.1.568.8.5.4.1.3 | ColumnhistPvcShapeIntvToDceLevel-1 | read-only | mandatory | This object identifies the percentage of traffic in level one within a specific 15-minutes interval in the direction of DCE. |
| 1.3.6.1.4.1.568.8.5.4.1.4 | ColumnhistPvcShapeIntvToDceLevel-2 | read-only | mandatory | This object identifies the percentage of traffic in level two within a specific 15-minutes interval in the direction of DCE. |
| 1.3.6.1.4.1.568.8.5.4.1.5 | ColumnhistPvcShapeIntvToDceLevel-3 | read-only | mandatory | This object identifies the percentage of traffic in level three within a specific 15-minutes interval in the direction of DCE. |
| 1.3.6.1.4.1.568.8.5.4.1.6 | ColumnhistPvcShapeIntvToDceLevel-4 | read-only | mandatory | This object identifies the percentage of traffic in level four within a specific 15-minutes interval in the direction of DCE. |
| 1.3.6.1.4.1.568.8.5.4.1.7 | ColumnhistPvcShapeIntvToDceLevel-5 | read-only | mandatory | This object identifies the percentage of traffic in level five within a specific 15-minutes interval in the direction of DCE. |
| 1.3.6.1.4.1.568.8.5.4.1.8 | ColumnhistPvcShapeIntvToDceLevel-6 | read-only | mandatory | This object identifies the percentage of traffic in level six within a specific 15-minutes interval in the direction of DCE. |
| 1.3.6.1.4.1.568.8.5.4.1.9 | ColumnhistPvcShapeIntvToDceLevel-7 | read-only | mandatory | This object identifies the percentage of traffic in level seven within a specific 15-minutes interval in the direction of DCE. |
| 1.3.6.1.4.1.568.8.5.5 | TablehistPvcShapeIntvToDte-Table | not-accessible | mandatory | PVC shape to DTE interval table, which displays the pvc traffic information to the direction of DTE over 3 previous hours. |
| 1.3.6.1.4.1.568.8.5.5.1 | RowhistPvcShapeIntvToDte-Entry | not-accessible | mandatory | Identifies an entry (row) in pvc traffic shape to DTE interval table |
| 1.3.6.1.4.1.568.8.5.5.1.1 | ColumnhistPvcShapeIntvToDte-pvcIx | read-only | mandatory | The index value which uniquely identifies the PVC number to which this entry is applicable. |
| 1.3.6.1.4.1.568.8.5.5.1.2 | ColumnhistPvcShapeIntvToDte-intvIx | read-only | mandatory | The index value which uniquely identifies the interval number to which this entry is applicable. |
| 1.3.6.1.4.1.568.8.5.5.1.3 | ColumnhistPvcShapeIntvToDteLevel-1 | read-only | mandatory | This object identifies the percentage of traffic in level one within a specific 15-minutes interval in the direction of DTE. |
| 1.3.6.1.4.1.568.8.5.5.1.4 | ColumnhistPvcShapeIntvToDteLevel-2 | read-only | mandatory | This object identifies the percentage of traffic in level two within a specific 15-minutes interval in the direction of DTE. |
| 1.3.6.1.4.1.568.8.5.5.1.5 | ColumnhistPvcShapeIntvToDteLevel-3 | read-only | mandatory | This object identifies the percentage of traffic in level three within a specific 15-minutes interval in the direction of DTE. |
| 1.3.6.1.4.1.568.8.5.5.1.6 | ColumnhistPvcShapeIntvToDteLevel-4 | read-only | mandatory | This object identifies the percentage of traffic in level four within a specific 15-minutes interval in the direction of DTE. |
| 1.3.6.1.4.1.568.8.5.5.1.7 | ColumnhistPvcShapeIntvToDteLevel-5 | read-only | mandatory | This object identifies the percentage of traffic in level five within a specific 15-minutes interval in the direction of DTE. |
| 1.3.6.1.4.1.568.8.5.5.1.8 | ColumnhistPvcShapeIntvToDteLevel-6 | read-only | mandatory | This object identifies the percentage of traffic in level six within a specific 15-minutes interval in the direction of DTE. |
| 1.3.6.1.4.1.568.8.5.5.1.9 | ColumnhistPvcShapeIntvToDteLevel-7 | read-only | mandatory | This object identifies the percentage of traffic in level seven within a specific 15-minutes interval in the direction of DTE. |
| 1.3.6.1.4.1.568.8.6 | NodeprobeIntervalStartTime | |||
| 1.3.6.1.4.1.568.8.6 | NodepvcBecn | This trap is generated when a PVC's BECNs is exceed the preset threshold within current interval. | ||
| 1.3.6.1.4.1.568.8.6.1 | TableintvStartTimeIntv-Table | not-accessible | mandatory | Probe interval start time table, which displays the interval starting time for each interval covering the last 24 hours. |
| 1.3.6.1.4.1.568.8.6.1.1 | RowintvStartTimeIntv-Entry | not-accessible | mandatory | Identifies an entry (row) in probe interval start time interval table. |
| 1.3.6.1.4.1.568.8.6.1.1.1 | ColumnintvStartTimeIntv-index | read-only | mandatory | Identifies an entry (row) in interval start time table, total 96 time intervals, where 1 is the most recently completed 15 minutes interval and 96 is the least… |
| 1.3.6.1.4.1.568.8.6.1.1.2 | Columnintv-start-time | read-only | mandatory | intv-start-time displays the current interval starting time with 4 digits year, 2 digits month, 2 digits date and hours, minutes and seconds, which are each 2 … |
| 1.3.6.1.4.1.568.8.7 | NodedbuConfigGroup | |||
| 1.3.6.1.4.1.568.8.7 | NodepvcFecn | This trap is generated when a PVC's FECNs is exceed the preset threshold within current interval. | ||
| 1.3.6.1.4.1.568.8.7.1 | TabledbuPVCTable | not-accessible | mandatory | DBU PVC table. It contains PVC/DLCI Dial-Backup information |
| 1.3.6.1.4.1.568.8.7.1.1 | RowdbuPVCEntry | not-accessible | mandatory | Identifies an entry (row) in dbuPVCTable. |
| 1.3.6.1.4.1.568.8.7.1.1.1 | ColumndbuPVCTableIndex | read-only | mandatory | Identifies an entry (row) in PVC table as the local PVC (DLCI) Number. |
| 1.3.6.1.4.1.568.8.7.1.1.2 | ColumndbuRemotePVCDlci | read-write | mandatory | Defines the remote PVC's DLCI number the data is to be routed to. |
| 1.3.6.1.4.1.568.8.7.1.1.3 | ColumndbuIsdnAddress | read-write | mandatory | Defines the ISDN Dialing Address to reach the PVC's backup site |
| 1.3.6.1.4.1.568.8.7.1.1.4 | ColumndbuPvcCir | read-write | mandatory | This parameter defines the maximum transfer information rate (Bits Per Second) toward the backup PVC. |
| 1.3.6.1.4.1.568.8.7.2 | ScalardbuMasterSlave | read-write | mandatory | Defines whether the DBU probe is a Master or Slave. |
| 1.3.6.1.4.1.568.8.7.3 | ScalardbuBackupType | read-write | mandatory | Defines the type of backup. |
| 1.3.6.1.4.1.568.8.7.4 | ScalardbuPVCAdd | write-only | mandatory | This object allows the user to add a PVC to the existing PVC table, the added PVC must not exist before it is added. |
| 1.3.6.1.4.1.568.8.7.5 | ScalardbuPVCDelete | write-only | mandatory | This object allows the user to delete a PVC from the existing PVC table, the PVC must exist before it is deleted. |
| 1.3.6.1.4.1.568.8.7.6 | ScalardbuRecoverCount | read-write | mandatory | Number of LMI Active Occurrences to restore PVC change request. The value is between 1 to 20. |
| 1.3.6.1.4.1.568.8.7.7 | ScalardbuDialedIsdnAddress | read-only | mandatory | Defines the Dialed ISDN Address for the most recent DBU call |
| 1.3.6.1.4.1.568.8.8 | NodedeviceStatusGroup | |||
| 1.3.6.1.4.1.568.8.8 | NodepvcUtilToDTE | This trap is generated when a PVC's utilization is exceeding the preset threshold within current interval. | ||
| 1.3.6.1.4.1.568.8.8.1 | ScalarglobalStatus | read-only | mandatory | Defines device status as: ready = Device is operating normally. connected = At least one PVC is in backup mode. test = Device is in test mode (Not implemented … |
| 1.3.6.1.4.1.568.8.8.2 | TablepvcStatusTable | not-accessible | mandatory | Per PVC status table. The PVCs(DLCIs) monitored are PVCs(DLCIs) defined by LMI messages from the network. |
| 1.3.6.1.4.1.568.8.8.2.1 | RowpvcStatusEntry | not-accessible | mandatory | Identifies an entry (row) in pvcStatusTable. |
| 1.3.6.1.4.1.568.8.8.2.1.1 | ColumnpvcStatusIndex | read-only | mandatory | Identifies an entry (row) in pvcStatusTable as the local PVC (DLCI) Number. |
| 1.3.6.1.4.1.568.8.8.2.1.2 | ColumnpvcStatus | read-only | mandatory | Defines the PVC Status as: pvcInactive = Configured at the network, but not active. pvcActive = Configured at the network, and active. pvcConnected = Pvc conne… |
| 1.3.6.1.4.1.568.8.8.3 | ScalareventSubject | read-only | mandatory | Defines CP-3000 Log Events as: device = Device specific events. pvc = PVC specific events. |
| 1.3.6.1.4.1.568.8.8.4 | ScalarpvcIdentifier | read-only | mandatory | Identifies the PVC Number for PVC specific events only. This objects has no meaning for Device specific events. |
| 1.3.6.1.4.1.568.8.8.5 | Scalarcp3000LogCode | read-only | mandatory | CP-3000 ASCII Log Code for Device or PVC events |
| 1.3.6.1.4.1.568.8.8.6 | Scalarcp3000LogSpeed | read-only | mandatory | CP-3000 ASCII Log Code for ISDN Line Speed |
| 1.3.6.1.4.1.568.8.8.7 | Scalarcp3000LogDate | read-only | mandatory | Date and Time in ASCII format: YYMMDDhhmmss |
| 1.3.6.1.4.1.568.8.8.8 | Scalarcp3000LogInfo | read-only | mandatory | Need to ask what goes in here |
| 1.3.6.1.4.1.568.8.9 | NodepvcUtilToDCE | This trap is generated when a PVC's utilization is exceeding the preset threshold within current interval. | ||
| 1.3.6.1.4.1.568.8.9 | NodetrapAcknowledgeGroup | |||
| 1.3.6.1.4.1.568.8.9.1 | ScalartrapAckEnable | read-write | mandatory | Acknowledgement setting for CP-3000 Log Event Traps: enabled = NMS has to acknowledge traps received. disabled = NMS doesn't need to acknowledge traps received. |
| 1.3.6.1.4.1.568.8.9.2 | ScalartrapAckTimeout | read-write | mandatory | Timeout value to retransmit a trap when trapAckEnable object == enabled and no ACK received from NMS. |
| 1.3.6.1.4.1.568.8.9.3 | ScalartrapAckFromMngr | read-write | mandatory | Trap Acknowledgement Indication: When trapAckEnable object == enabled NMS has to ACK every trap received. |
| 1.3.6.1.4.1.568.8.10 | NodepvcCIRExceedToDTE | This trap is generated when the octets transmitted to the network direction is exceeding the CIR within current interval. | ||
| 1.3.6.1.4.1.568.8.11 | NodepvcEIRExceedToDTE | This trap is generated when the octets transmitted to the network direction is exceeding the EIR within current interval. | ||
| 1.3.6.1.4.1.568.8.12 | NodepvcLossFrameTx | This trap is generated when frames were lost in the transmission direction within current interval. | ||
| 1.3.6.1.4.1.568.8.13 | NodepvcLossFrameRx | This trap is generated when frames were lost in the receiving direction within current interval. | ||
| 1.3.6.1.4.1.568.8.14 | NodefrChanUtilToDTE-exception | This trap will be sent at any time in two cases: 1. The channel utilization to DTE (measured in TC) is exceeding the threshold if such trap never be sent in th… | ||
| 1.3.6.1.4.1.568.8.15 | NodefrChanUtilToDCE-exception | This trap will be sent at any time in two cases: 1. The channel utilization to DCE (measured in TC) is exceeding the threshold if such trap never be sent in th… | ||
| 1.3.6.1.4.1.568.8.16 | NodefrChanUtilToDTE-endException | This trap will be sent if the channel utilization to DTE (measured in TC) is changed back below the threshold. | ||
| 1.3.6.1.4.1.568.8.17 | NodefrChanUtilToDCE-endException | This trap will be sent if the channel utilization to DCE (measured in TC) is changed back below the threshold. | ||
| 1.3.6.1.4.1.568.8.18 | NodepvcRTD-exception | This trap will be sent at any time in two cases: 1. The PVC RTD real time value (measured at every Poll interval) is exceeding the threshold if such trap never… | ||
| 1.3.6.1.4.1.568.8.19 | NodepvcRTD-endException | This trap will be sent if the PVC DTD real time (measured at every Poll interval) is changed back below the threshold. | ||
| 1.3.6.1.4.1.568.8.20 | NodepvcLoadToDTE-exception | This trap will be sent at any time at these two cases: 1. The PVC load to DTE real time value (measured in TC ) is exceeding the threshold if such trap has nev… | ||
| 1.3.6.1.4.1.568.8.21 | NodepvcLoadToDCE-exception | This trap will be sent at any time at these two cases: 1. The PVC load to DCE real time value (measured in TC, ) is exceeding the threshold if such trap has ne… | ||
| 1.3.6.1.4.1.568.8.22 | NodepvcLoadToDTE-endException | This trap will be sent if the PVC load to DTE real time (measured in TC) is changed back below the threshold. | ||
| 1.3.6.1.4.1.568.8.23 | NodepvcLoadToDCE-endException | This trap will be sent if the PVC load to DCE real time (measured in TC) is changed back below the threshold. | ||
| 1.3.6.1.4.1.568.8.24 | NodepvcStatusChangeAvail | This trap is generated when a PVC status changes from unavailable to available. | ||
| 1.3.6.1.4.1.568.8.25 | NodepvcStatusChangeUnavail | This trap is generated when a PVC status changes from available to unavailable, or from valid to invalid (PVC becomes deleted). | ||
| 1.3.6.1.4.1.568.8.26 | NodedbuPvcStatusChangeBackedUp | This trap is generated when a DBU PVC status changes to backed-up. | ||
| 1.3.6.1.4.1.568.8.27 | NodedbuPvcStatusChangeNotBackedUp | This trap is generated when a DBU PVC status changes to not backed-up. | ||
| 1.3.6.1.4.1.568.8.28 | NodedbuBackupCallActivation | This trap is generated when a back-up call is activated. | ||
| 1.3.6.1.4.1.568.8.29 | NodedbuBackupCallDeactivation | This trap is generated when a back-up call is deactivated. | ||
| 1.3.6.1.4.1.568.8.30 | NodedbuBackupCallFailed | This trap is generated when a back-up call failed to activate. | ||
| 1.3.6.1.4.1.568.8.31 | NodedcdAlarmDetection | This trap is generated when a DCD alarm is detected. | ||
| 1.3.6.1.4.1.568.8.32 | Nodecp3000Event | This trap is the CP-3000 compliant Log Event trap, generated when a Device or PVC specific status change occurs. | ||
| 1.3.6.1.4.1.568.8.33 | NodebypassEnabled | This trap is generated when frame relay automatically enables frame relay data BYPASS. |