LINKSWITCH-MIB
65 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.17 | NodelinkSwitch | |||
| 1.3.6.1.4.1.43.17.1 | ScalarlsSRFilterEnable | read-write | mandatory | When false, the Address Filter forwards Source Routed frames, that is, frames with a 1 in the MSB of the Source Address. When true, the Address Filter does not… |
| 1.3.6.1.4.1.43.17.2 | ScalarlsSegmentFilterEnable | read-write | mandatory | Controls action taken with Eth frames with source and destination stations on the same segment (i.e. port). When true, the Address Filter will not forward intr… |
| 1.3.6.1.4.1.43.17.3 | ScalarlsMcastFilterEnable | read-write | mandatory | When false, all frames with a Multicast Destination Address that does not match any Address Filter entry are forwarded to all ports. Those with a match are for… |
| 1.3.6.1.4.1.43.17.4 | ScalarlsLoopDetectAction | read-write | mandatory | If a station appears to be on two ports, Address Filter thrashing will occur. Detection of this situation is possible, and this object controls the action to b… |
| 1.3.6.1.4.1.43.17.5 | ScalarlsAddressAgingTimer | read-write | mandatory | A count of the seconds that will elapse before the Address Filter contents are 'aged' to remove entries which are not active. Default is 1800, or 30 minutes. W… |
| 1.3.6.1.4.1.43.17.6 | ScalarlsIPEchoAgingHelp | read-write | mandatory | If true, an IP echo frame will be broadcast on the subnet, which will cause otherwise quiecient stations to become active. The rate is half of lsAddressAgingTi… |
| 1.3.6.1.4.1.43.17.7 | ScalarlsProdVerSW | read-only | mandatory | This describes the version of the software currently running. Returns a string in the form X.YZ, where X represents the major version, Y represents the minor v… |
| 1.3.6.1.4.1.43.17.8 | ScalarlsProdVerHW | read-only | mandatory | This describes the version of the hardware currently running. Returns a string in the form X.YZ, where X represents the major version, Y represents the minor v… |
| 1.3.6.1.4.1.43.17.9 | ScalarlsLEDstate | read-only | mandatory | A binary structure which describes the current state of all of the LEDs of an LinkSwitch. Actual layout available on request. |
| 1.3.6.1.4.1.43.17.10 | ScalarlsTestResult | read-only | mandatory | When a test is initiated via lsAction, the result of the test is stored in this variable when the test has completed or failed. The value varies by test, is se… |
| 1.3.6.1.4.1.43.17.11 | ScalarlsAction | read-write | mandatory | Value when read will be other. Writing a value to this object will result in the associated action taking place. Note that it is possible to disconnect the man… |
| 1.3.6.1.4.1.43.17.12 | ScalarlsEportNumber | read-only | mandatory | A count of the Ethernet Ports supported by this system. |
| 1.3.6.1.4.1.43.17.13 | TablelsEportTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.17.13.1 | RowlsEportEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.17.13.1.1 | ColumnlsEportIndex | read-only | mandatory | The index of this table entry. |
| 1.3.6.1.4.1.43.17.13.1.2 | ColumnlsEportEnable | read-write | mandatory | When false, port is in reset state, so no port (Ethernet) traffic will go through. When enabled, functionality is further controlled by lsEportActivate and ifO… |
| 1.3.6.1.4.1.43.17.13.1.3 | ColumnlsEportActivate | read-write | mandatory | When true, port is shutdown but not reset, so counters will maintain values at time of deactivation. Further functionality controlled by ifOperStatus. Default … |
| 1.3.6.1.4.1.43.17.13.1.4 | ColumnlsEportLinkState | read-only | mandatory | Reports status of Link, as affected by lsEportEnable, lsEportActive, lsEportForwarding, and ifOperStatus. |
| 1.3.6.1.4.1.43.17.13.1.5 | ColumnlsEportName | read-write | mandatory | Abstract name for port. DURABLE. |
| 1.3.6.1.4.1.43.17.13.1.6 | ColumnlsEportSQETestEnable | read-write | mandatory | When true, SQE test (heartbeat) will occur after each frame transmitted by Ethernet MAC. Need not be disabled for those ports which are connected to a repeater… |
| 1.3.6.1.4.1.43.17.13.1.7 | ColumnlsEportLongPktsEnable | read-write | mandatory | When true, frames with lengths longer than Ethernet maximum will be allowed to go from FDDI to Ethernet and Ethernet to FDDI. Default is false. DURABLE. |
| 1.3.6.1.4.1.43.17.13.1.8 | ColumnlsEportMCastFilterEnable | read-write | mandatory | When true, filtering will occur based on the values of lsEportMCastRate and lsEportMCastBurstLimit. If false, there is no port-level filtering performed on mul… |
| 1.3.6.1.4.1.43.17.13.1.9 | ColumnlsEportMCastRate | read-write | mandatory | The rate in frames/second that multicasts will not be allowed to exceed, when lsEportBcastFilterEnable is true. Must also set lsEportMCastBurstLimit to non-zer… |
| 1.3.6.1.4.1.43.17.13.1.10 | ColumnlsEportMCastBurstLimit | read-write | mandatory | This specifies the maximum number of multicasts that can be forwarded from FDDI to Ethernet port in a 'burst' before the lsEportBCastRate limit causes frames t… |
| 1.3.6.1.4.1.43.17.13.1.11 | ColumnlsEportStationsNumber | read-only | mandatory | A count of stations whose Physical Address has been detected in the Source Address field of a frame which was transmitted by a station connected to this port. |
| 1.3.6.1.4.1.43.17.13.1.12 | ColumnlsEportSecsSinceLastClear | read-only | mandatory | A count of seconds since last cleared counters for this port. Use lsEportAction to clear the counters. |
| 1.3.6.1.4.1.43.17.13.1.13 | ColumnlsEportTestResult | read-only | mandatory | When a test is initiated via lsEportAction, the result of the test is stored in this variable when the test has completed or failed. The value varies by test, … |
| 1.3.6.1.4.1.43.17.13.1.14 | ColumnlsEportAction | read-write | mandatory | Value when read will be other. Writing a value to this object will result in the associated action taking place. For those actions which are tests, the result … |
| 1.3.6.1.4.1.43.17.13.1.15 | ColumnlsEportFtoEByteCts | read-only | mandatory | A count of bytes that were forwarded from the FDDI MAC to the Ethernet through the Address Filter. The count per frame includes the packet's bytes as received … |
| 1.3.6.1.4.1.43.17.13.1.16 | ColumnlsEportEtoFByteCts | read-only | mandatory | A count of bytes that were forwarded from the Ethernet MAC to the Address Filter. The count per packet includes the byte count indicated by the Ethernet MAC (w… |
| 1.3.6.1.4.1.43.17.13.1.17 | ColumnlsEportFtoEPacketCts | read-only | mandatory | A count of frames that were forwarded from the FDDI MAC to the Ethernet MAC through the Address Filter. The count is the number of frames that the Ethernet MAC… |
| 1.3.6.1.4.1.43.17.13.1.18 | ColumnlsEportEtoFPacketCts | read-only | mandatory | A count of frames that were forwarded trom the Ethernet MAC to the Address Filter. The count is the number of frames received without error by the Ethernet MAC… |
| 1.3.6.1.4.1.43.17.13.1.19 | ColumnlsEportFtoEDropPktCts | read-only | mandatory | A count of frames that were dropped as they went from the FDDI to the Ethernet through the Address Filter. Frames may be dropped due to resource constraints. |
| 1.3.6.1.4.1.43.17.13.1.20 | ColumnlsEportEtoFDropPktCts | read-only | mandatory | A count of frames that were dropped before reaching the FDDI MAC. Include in this value are frames encountering resource constraints, as well as frames which d… |
| 1.3.6.1.4.1.43.17.13.1.21 | ColumnlsEportFtoEBusErrorCts | read-only | mandatory | A count of frames that encountered a Parity or FIFO Error as they went from FDDI to the Ethernet. |
| 1.3.6.1.4.1.43.17.13.1.22 | ColumnlsEportEtoFBusErrorCts | read-only | mandatory | A count of frames that encountered a Parity or FIFO Error as they went from Ethernet to the FDDI. |
| 1.3.6.1.4.1.43.17.13.1.23 | ColumnlsEportXMCastCts | read-only | mandatory | A count of frames transmitted to a multicast address. Does not include frames sent to the broadcast address. |
| 1.3.6.1.4.1.43.17.13.1.24 | ColumnlsEportXBCastCts | read-only | mandatory | A count of frames transmitted to a broadcast address. Does not include frames sent to the multicast address. |
| 1.3.6.1.4.1.43.17.13.1.25 | ColumnlsEportXDirectedCts | read-only | mandatory | A count of frames transmitted that were not addressed to either the multicast or the broadcast address. |
| 1.3.6.1.4.1.43.17.13.1.26 | ColumnlsEportXDeferredCts | read-only | mandatory | A count of frames for which the first transmission attempt is delayed because the medium is busy. The count does not include frames involved in collisions. |
| 1.3.6.1.4.1.43.17.13.1.27 | ColumnlsEportXLateCollCts | read-only | mandatory | A count of times that a collision is detected later 512 bit-times into the transmission of a packet. A late collision is also considered as a generic collision… |
| 1.3.6.1.4.1.43.17.13.1.28 | ColumnlsEportXCollAbortCts | read-only | mandatory | A count of frames for which transmission fails due to excessive collisions. |
| 1.3.6.1.4.1.43.17.13.1.29 | ColumnlsEportXCSErrCts | read-only | mandatory | A count of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame. |
| 1.3.6.1.4.1.43.17.13.1.30 | ColumnlsEportXExcessDeferCts | read-only | mandatory | A count of times that the deferral time was excessive. |
| 1.3.6.1.4.1.43.17.13.1.31 | ColumnlsEportXUnderrunCts | read-only | mandatory | A count of times that an underrun occured. |
| 1.3.6.1.4.1.43.17.13.1.32 | ColumnlsEportXSQETestFailCts | read-only | mandatory | A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section … |
| 1.3.6.1.4.1.43.17.13.1.33 | ColumnlsEportRMCastCts | read-only | mandatory | A count of frames received with a multicast address. Does not include frames received with a broadcast address. |
| 1.3.6.1.4.1.43.17.13.1.34 | ColumnlsEportRBCastCts | read-only | mandatory | A count of frames received with a broadcast address. Does not include frames received with a multicast address. |
| 1.3.6.1.4.1.43.17.13.1.35 | ColumnlsEportRDirectedCts | read-only | mandatory | A count of frames received that were not addressed to either the multicast or the broadcast address. |
| 1.3.6.1.4.1.43.17.13.1.36 | ColumnlsEportRAlignmentCts | read-only | mandatory | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented b… |
| 1.3.6.1.4.1.43.17.13.1.37 | ColumnlsEportRTooLongCts | read-only | mandatory | A count of frames which were received and also exceeded the maximum frame size. |
| 1.3.6.1.4.1.43.17.13.1.38 | ColumnlsEportRFCSErrorCts | read-only | mandatory | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an… |
| 1.3.6.1.4.1.43.17.13.1.39 | ColumnlsEportROverrunCts | read-only | mandatory | The number of frames which could not be stored by the Ethernet MAC due to internal resource constraints. |
| 1.3.6.1.4.1.43.17.14 | ScalarlsStationsNumber | read-only | mandatory | A count of stations whose Physical Address has been detected in the Source Address field of a frame which was transmitted by a station connected to an Ethernet… |
| 1.3.6.1.4.1.43.17.15 | TablelsStationsTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.17.15.1 | RowlsStationsEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.17.15.1.1 | ColumnlsStationsPortIndex | read-only | mandatory | The lsEportIndex of the port to which the addresses apply. |
| 1.3.6.1.4.1.43.17.15.1.2 | ColumnlsStationsAddrIndex | read-only | mandatory | The index of this address within a row of the table lsStationsTable, where the row is selected by the value of lsStationsPortIndex. |
| 1.3.6.1.4.1.43.17.15.1.3 | ColumnlsStationsAddress | read-only | mandatory | A Physical Address which has been seen as a Source Address on this port since the last time the Address Filter was aged. |
| 1.3.6.1.4.1.43.17.16 | ScalarlsBusCts | read-only | mandatory | A binary structure which contains the FtoE and EtoF counters for all ls ports. Actual layout available on request. |
| 1.3.6.1.4.1.43.17.17 | ScalarlsPortAMediaPresent | read-only | mandatory | Reports presence and type of FDDI Port A Media. For FMS LinkSwitch, only Fiber and UTP are supported. |
| 1.3.6.1.4.1.43.17.18 | ScalarlsPortBMediaPresent | read-only | mandatory | Reports presence and type of FDDI Port B Media. For FMS LinkSwitch, only Fiber and UTP are supported. |
| 1.3.6.1.4.1.43.17.19 | ScalarlsFMSBackupPSSense | read-only | mandatory | Reports the presence and status of the backup power supply on FMS LinkSwitch Only. |
| 1.3.6.1.4.1.43.17.20 | ScalarlsfddiPATHRingLatency | read-only | mandatory | Reports the measurement (in 80 nanosecond ticks) of total accumulated latency of the ring associated with the current path. |