LINKSYS-MODEL-MIB
334 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.1 | Nodedirectory | |||
| 1.3.6.1.2 | Nodemgmt | |||
| 1.3.6.1.3 | Nodeexperimental | |||
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.3955 | Nodelinksys | |||
| 1.3.6.1.4.1.3955.1 | Nodecommon | |||
| 1.3.6.1.4.1.3955.1.1 | ScalarcommonFirmwareVer | read-only | mandatory | The firmware version of this managed node. |
| 1.3.6.1.4.1.3955.1.2 | ScalarcommonMIBfileVer | read-only | mandatory | Defines the current version of Linksys MIB definition. Initially the version number is 1.00.00. |
| 1.3.6.1.4.1.3955.1.3 | ScalarcommonDevType | read-only | mandatory | The hardware type of this managed node. |
| 1.3.6.1.4.1.3955.1.4 | ScalarcommonModelId | read-only | mandatory | The hardware model ID of this managed node. |
| 1.3.6.1.4.1.3955.1.5 | TablecommonTable | not-accessible | mandatory | Table of basic information that can be used to identify this managed node. |
| 1.3.6.1.4.1.3955.1.5.1 | RowcommonEntry | not-accessible | mandatory | An entry in the table, containing read only identification information. |
| 1.3.6.1.4.1.3955.1.5.1.1 | ColumncommonIfIndex | read-only | mandatory | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.4.1.3955.1.5.1.2 | ColumncommonFunIndex | read-only | mandatory | The type of function, distinguished according to hardware model of this managed node. |
| 1.3.6.1.4.1.3955.1.5.1.3 | ColumncommonNote | read-only | mandatory | Notification for the specified function. |
| 1.3.6.1.4.1.3955.2 | Nodemanagement | |||
| 1.3.6.1.4.1.3955.2.1 | NodebasicMgt | |||
| 1.3.6.1.4.1.3955.2.1.1 | ScalarmgtSystemReset | read-write | mandatory | Indicates whether to set the managed node to do warm start or cold start. Definition refers to RFC1215. |
| 1.3.6.1.4.1.3955.2.1.2 | ScalarmgtFactoryReset | read-write | mandatory | Indicates whether to set the managed node to restore factory default settings or not. |
| 1.3.6.1.4.1.3955.2.1.3 | ScalarmgtAdministrator | read-write | mandatory | The authorized password used to access the system. |
| 1.3.6.1.4.1.3955.2.1.4 | ScalarmgtAdminUsername | read-write | mandatory | The user name used to access the system. |
| 1.3.6.1.4.1.3955.2.1.5 | ScalarmgtSaveConfiguration | read-write | mandatory | Indicates whether to store Enterprise MIB objects value in non-volatile RAM and reinitializing the managed node. |
| 1.3.6.1.4.1.3955.2.1.6 | ScalarmgtHostName | read-write | mandatory | Supply a host name for the router. Some ISPs require this name as identification. Leaving this field will work. |
| 1.3.6.1.4.1.3955.2.1.7 | ScalarmgtDomainName | read-write | mandatory | Supply a domain name for the router. Some ISPs require this name as identification. Leaving this field will work. |
| 1.3.6.1.4.1.3955.2.1.8 | ScalarmgtNodeNetAddress | read-write | mandatory | The IP address to which identifies this managed node from internal networking. |
| 1.3.6.1.4.1.3955.2.1.9 | ScalarmgtNodeSubnetMask | read-write | mandatory | The subnet mask associated with the IP address of this system. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits… |
| 1.3.6.1.4.1.3955.2.1.10 | ScalarmgtDhcpStatus | read-write | mandatory | Indicates whether to configure the managed node to automatically assign IP address to each of LAN clients. |
| 1.3.6.1.4.1.3955.2.1.11 | ScalarmgtDhcpStartNetAddr | read-write | mandatory | Specifies a start IP address to which DHCP will issue to |
| 1.3.6.1.4.1.3955.2.1.12 | ScalarmgtDhcpNumberUsers | read-write | mandatory | The number of clients to which plan on networking to this managed node. |
| 1.3.6.1.4.1.3955.2.1.13 | TablemgtCommunityTable | not-accessible | mandatory | Table of access community. |
| 1.3.6.1.4.1.3955.2.1.13.1 | RowmgtCommunityEntry | not-accessible | mandatory | An entry in the table, containing read/write community names. |
| 1.3.6.1.4.1.3955.2.1.13.1.1 | ColumnmgtCommunityIndex | read-only | mandatory | An unique value for each community. |
| 1.3.6.1.4.1.3955.2.1.13.1.2 | ColumnmgtCommunityName | read-write | mandatory | The name used to manage the SNMP protocol entity. |
| 1.3.6.1.4.1.3955.2.1.13.1.3 | ColumnmgtCommunityType | read-write | mandatory | Specifies the privilege for this community name. |
| 1.3.6.1.4.1.3955.2.2 | NodeadvanceMgt | |||
| 1.3.6.1.4.1.3955.2.2.1 | ScalaradvMgtRefreshMIB | read-write | mandatory | Refresh Enterprise MIB object data from RAM NV. |
| 1.3.6.1.4.1.3955.2.2.2 | ScalaradvMgtWanReqBlockStatus | read-write | mandatory | Set to enable(1) will prevent local network from being 'pinged' or detected and also can reinforce local network security by hiding the network port. |
| 1.3.6.1.4.1.3955.2.2.3 | ScalaradvMgtIpSecPassThroughStatus | read-write | mandatory | Specifies to enable(1) or disable(0) IPSec Pass Through ability. |
| 1.3.6.1.4.1.3955.2.2.4 | ScalaradvMgtPptpPassThroughStatus | read-write | mandatory | Point-to-Point Tunneling Protocol is the method used to enable VPN tunnels. This object can be used to specify the PPTP pass through ability. |
| 1.3.6.1.4.1.3955.2.2.5 | ScalaradvMgtL2TPPassThroughStatus | read-write | mandatory | Specifies to enable(1) or disable(0) Layer Two Tunneling Protocol Pass Through ability. |
| 1.3.6.1.4.1.3955.2.2.6 | ScalaradvMgtRemoteMgtStatus | read-write | mandatory | Specifies whether allow this managed node to be managed from a remote location. |
| 1.3.6.1.4.1.3955.2.2.7 | ScalaradvMgtRemoteUpgradeStatus | read-write | mandatory | Specifies whether allow the managed node's firmware to be upgraded from a remote location. |
| 1.3.6.1.4.1.3955.2.2.8 | ScalaradvMgtAccessLogStatus | read-write | mandatory | Specifies whether to send access log messages to specific management entities. |
| 1.3.6.1.4.1.3955.2.2.9 | ScalaradvMgtMulticastPassStatus | read-write | mandatory | Specifies whether allow for multiple transmissions to specific receptions at the same time. |
| 1.3.6.1.4.1.3955.2.2.10 | ScalaradvMgtMtuStatus | read-write | mandatory | Indicates whether to use specific MTU size, refer to advMgtMtuSize object, as the largest packet size. |
| 1.3.6.1.4.1.3955.2.2.11 | ScalaradvMgtMtuSize | read-write | mandatory | Specifies the largest packet size permitted for network transmission. |
| 1.3.6.1.4.1.3955.2.2.12 | ScalaradvMgtLocalTimeZone | read-write | mandatory | Indicates local time zone for this managed node. |
| 1.3.6.1.4.1.3955.2.2.13 | TableroutingMethodTable | not-accessible | mandatory | The table of dynamic routing settings which can automatically adjust to physical changes in the network's layout. |
| 1.3.6.1.4.1.3955.2.2.13.1 | RowroutingMethodEntry | not-accessible | mandatory | The protocol information for one of this entity's routing method. |
| 1.3.6.1.4.1.3955.2.2.13.1.1 | ColumnroutingMethodIndex | read-only | mandatory | An unique value for each routing method. |
| 1.3.6.1.4.1.3955.2.2.13.1.2 | ColumndynamicRoutingTX | read-write | mandatory | Indicates the protocol to which transmit data on the network. |
| 1.3.6.1.4.1.3955.2.2.13.1.3 | ColumndynamicRoutingRX | read-write | mandatory | Indicates the protocol to which receive data on the network. |
| 1.3.6.1.4.1.3955.2.2.14 | TabledmzTable | not-accessible | mandatory | The table of DMZ settings which allow one local user to be exposed to the Internet to use a special-purpose service. |
| 1.3.6.1.4.1.3955.2.2.14.1 | RowdmzEntry | not-accessible | mandatory | The IP addresses information for one of DMZ. |
| 1.3.6.1.4.1.3955.2.2.14.1.1 | ColumndmzIndex | read-only | mandatory | An unique value for each DMZ setting. |
| 1.3.6.1.4.1.3955.2.2.14.1.2 | ColumndmzRemoteIPAddress | read-write | mandatory | Specifies the remote host IP address to which maps to the local host specified by dmzHostIPAddress object. |
| 1.3.6.1.4.1.3955.2.2.14.1.3 | ColumndmzHostIPAddress | read-write | mandatory | Specifies the local host IP address which will be exposed to the Internet. |
| 1.3.6.1.4.1.3955.2.2.15 | TablestaticRoutingTable | not-accessible | mandatory | The table of static routing methods which specifies pre-determined pathway that network information must travel to reach a specific host or network. |
| 1.3.6.1.4.1.3955.2.2.15.1 | RowstaticRoutingEntry | not-accessible | mandatory | The configuration information for one of static routing. |
| 1.3.6.1.4.1.3955.2.2.15.1.1 | ColumnstaticRoutingIndex | read-only | mandatory | An unique value for each static routing method. |
| 1.3.6.1.4.1.3955.2.2.15.1.2 | ColumndestinationNetAddress | read-write | mandatory | The IP address of the remote network or host to which will be assigned a static route. |
| 1.3.6.1.4.1.3955.2.2.15.1.3 | ColumnroutingSubnetMask | read-write | mandatory | Determines which portion of an IP address is the network portion, and which portion is the host portion. |
| 1.3.6.1.4.1.3955.2.2.15.1.4 | ColumnroutingDefaultGateway | read-write | mandatory | Specifies the IP address of the gateway device that allows for contact between the managed node and the remote network or host. |
| 1.3.6.1.4.1.3955.2.2.15.1.5 | ColumnroutingHopCount | read-write | mandatory | Specifies the maximun number of hops that packets to the destination specified by this route entry should be forwarded. |
| 1.3.6.1.4.1.3955.2.2.15.1.6 | ColumnroutingInterface | read-write | mandatory | Specifies the physical interface to which will apply this routing configuration. |
| 1.3.6.1.4.1.3955.2.2.15.1.7 | ColumnnFlagStatus | read-write | mandatory | Indicates the operation status for this routing entry. |
| 1.3.6.1.4.1.3955.2.2.16 | TabletrapManagerTable | not-accessible | mandatory | Table of SNMP Trap message receivers. |
| 1.3.6.1.4.1.3955.2.2.16.1 | RowtrapManagerEntry | not-accessible | mandatory | An entry in the table contains the host IP address which will receive trap messages. |
| 1.3.6.1.4.1.3955.2.2.16.1.1 | ColumntrapManagerIndex | read-only | mandatory | An unique value for each trap receiver. |
| 1.3.6.1.4.1.3955.2.2.16.1.2 | ColumntrapMgrNetAddress | read-write | mandatory | The IP address to which will receive the Log message sent via trap protocol. |
| 1.3.6.1.4.1.3955.2.2.17 | ScalaradvMgtUPnPStatus | read-write | mandatory | Specifies whether allow Windows XP to automatically confiure the managed node for various Internet applications. |
| 1.3.6.1.4.1.3955.2.2.18 | ScalaradvMgtUPnPControl | read-write | mandatory | Specifies whether allow Windows XP to read and write the UPnP Forwarding of managed node using UPnP. |
| 1.3.6.1.4.1.3955.2.2.19 | ScalaradvMgtUPnPConnectControl | read-write | mandatory | Specifies whether allow Windows XP to read and write the UPnP WAN Connection of managed node using UPnP. |
| 1.3.6.1.4.1.3955.2.3 | NodewanMgt | |||
| 1.3.6.1.4.1.3955.2.3.1 | TablewanConnectionTable | not-accessible | mandatory | Table of WAN connection management. |
| 1.3.6.1.4.1.3955.2.3.1.1 | RowwanConnectionEntry | not-accessible | mandatory | An entry in the table specifies the connection configuration for WAN interface. |
| 1.3.6.1.4.1.3955.2.3.1.1.1 | ColumnwanIndex | read-only | deprecated | An unique value for each WAN connection configuration. |
| 1.3.6.1.4.1.3955.2.3.1.1.2 | ColumnwanIfIndex | read-only | deprecated | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.4.1.3955.2.3.1.1.3 | ColumnwanConnectionType | read-write | mandatory | Indicates the protocol to which adopted by this WAN connection. |
| 1.3.6.1.4.1.3955.2.3.1.1.4 | ColumnwanNetAddress | read-write | mandatory | The IP address that this managed node has, when seen from the external WAN, or the Internet. |
| 1.3.6.1.4.1.3955.2.3.1.1.5 | ColumnwanPhysicalAddr | read-write | mandatory | The physical address that this managed node has, when seen from the external WAN, or the Internet. |
| 1.3.6.1.4.1.3955.2.3.1.1.6 | ColumnwanSubnetMask | read-write | mandatory | The subnet mask seen by external users on the Internet. |
| 1.3.6.1.4.1.3955.2.3.1.1.7 | ColumnwanDefaultGateway | read-write | mandatory | The IP address of remote host to which in respect to the forwarding of datagrams received by, but not addressed to, this managed node. |
| 1.3.6.1.4.1.3955.2.3.1.1.8 | ColumnwanDHCPStatus | read-write | mandatory | Indicates to release or renew the IP address of this managed node which seen from the external WAN, or the Internet. |
| 1.3.6.1.4.1.3955.2.3.1.1.9 | ColumnwanLoginStatus | read-write | mandatory | Specifies to cut the connection to ISP, set to disable(0), or to build up a PPPoE or RAS connection. |
| 1.3.6.1.4.1.3955.2.3.1.1.10 | ColumnwanLoginUserName | read-write | mandatory | The authorized user name used to access the ISP. |
| 1.3.6.1.4.1.3955.2.3.1.1.11 | ColumnwanLoginPassword | read-write | mandatory | The authorized password used to access the ISP. |
| 1.3.6.1.4.1.3955.2.3.1.1.12 | ColumnwanRasPlan | read-write | mandatory | Specifies the type of Remote Access Service plan used to connect with the ISP. |
| 1.3.6.1.4.1.3955.2.3.1.1.13 | ColumnwanWorkingMode | read-write | mandatory | Specifies the working mode for this managed node. Gateway mode should be used if this node is hosting local network's connection to the Internet. Router mode s… |
| 1.3.6.1.4.1.3955.2.3.1.1.14 | ColumnwanConnectedState | read-write | mandatory | Specifies the state to keepAlive(0) will keep the PPPoE-enabled Internet access connected indefinitely, even when it sits idle. Otherwise the connection to the… |
| 1.3.6.1.4.1.3955.2.3.1.1.15 | ColumnwanConnectedIdleTime | read-write | mandatory | Specifies the number of minutes that want to have elapsed before Internet access disconnects. A zero value indicates to remain the Internet connection on at al… |
| 1.3.6.1.4.1.3955.2.3.1.1.16 | ColumnwanConnectedRedialPeriod | read-write | mandatory | PPPoE retry to dial to ISP, due to ISP equipment bug in HK |
| 1.3.6.1.4.1.3955.2.3.2 | TablewanDnsNetAddressTable | not-accessible | mandatory | Table of DNS Server IP addresses. |
| 1.3.6.1.4.1.3955.2.3.2.1 | RowwanDnsNetAddressEntry | not-accessible | mandatory | An entry in the table contains one DNS server IP address. |
| 1.3.6.1.4.1.3955.2.3.2.1.1 | ColumnwanDnsNetAddressIndex | read-only | mandatory | An unique value for each DNS server. |
| 1.3.6.1.4.1.3955.2.3.2.1.2 | ColumnwanDnsIfIndex | read-only | deprecated | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index isthe same interface as identified b… |
| 1.3.6.1.4.1.3955.2.3.2.1.3 | ColumnwanDnsNetAddress | read-write | mandatory | Specifies the IP address of DNS server to which will translate domain or website names into Internet addresses or URLs. |
| 1.3.6.1.4.1.3955.2.4 | NodevpnMgt | |||
| 1.3.6.1.4.1.3955.2.4.1 | TablevpnIpsecTable | not-accessible | mandatory | Table of VPN Tunnel configuration. |
| 1.3.6.1.4.1.3955.2.4.1.1 | RowvpnIpsecEntry | not-accessible | mandatory | An entry in the table contains configuration for each tunnel. |
| 1.3.6.1.4.1.3955.2.4.1.1.1 | ColumnvpnTunnelIndex | read-only | mandatory | An unique value for each independent tunnel. |
| 1.3.6.1.4.1.3955.2.4.1.1.2 | ColumnvpnTunnelState | read-write | mandatory | Status of selected tunnel, disable or enable. |
| 1.3.6.1.4.1.3955.2.4.1.1.3 | ColumnvpnTunnelName | read-write | mandatory | Name of selected tunnel. |
| 1.3.6.1.4.1.3955.2.4.1.1.4 | ColumnvpnLocalIdType | read-write | mandatory | Select the local LAN user(s) behind the router that can use this VPN tunnel. This may be a single IP address, a Sub-network or a range of addresses. Notice tha… |
| 1.3.6.1.4.1.3955.2.4.1.1.5 | ColumnvpnLocalIp | read-write | mandatory | The IP address if vpnLocalIdType is ip(0). |
| 1.3.6.1.4.1.3955.2.4.1.1.6 | ColumnvpnLocalSubnet | read-write | mandatory | The Sub-network IP if vpnLocalIdType is subnet(1). |
| 1.3.6.1.4.1.3955.2.4.1.1.7 | ColumnvpnLocalSubnetMask | read-write | mandatory | The Sub-network mask if vpnLocalIdType is subnet(1). |
| 1.3.6.1.4.1.3955.2.4.1.1.8 | ColumnvpnLocalRangeBeg | read-write | mandatory | The start address of IP range if vpnLocalIdType is range(2). |
| 1.3.6.1.4.1.3955.2.4.1.1.9 | ColumnvpnLocalRangeEnd | read-write | mandatory | The end address of IP range if vpnLocalIdType is range(2). |
| 1.3.6.1.4.1.3955.2.4.1.1.10 | ColumnvpnRemoteIdType | read-write | mandatory | Select the remote LAN user(s) behind the remote gateway can use this VPN tunnel. This may be a single IP address, a Sub-network, range of addresses or any addr… |
| 1.3.6.1.4.1.3955.2.4.1.1.11 | ColumnvpnRemoteIp | read-write | mandatory | The IP address if vpnRemoteIdType is ip(0). |
| 1.3.6.1.4.1.3955.2.4.1.1.12 | ColumnvpnRemoteSubnet | read-write | mandatory | The Sub-network IP if vpnRemoteIdType is subnet(1). |
| 1.3.6.1.4.1.3955.2.4.1.1.13 | ColumnvpnRemoteSubnetMask | read-write | mandatory | The Sub-network mask if vpnRemoteIdType is subnet(1). |
| 1.3.6.1.4.1.3955.2.4.1.1.14 | ColumnvpnRemoteRangeBeg | read-write | mandatory | The start address of IP range if vpnRemoteIdType is range(2). |
| 1.3.6.1.4.1.3955.2.4.1.1.15 | ColumnvpnRemoteRangeEnd | read-write | mandatory | The end address of IP range if vpnRemoteIdType is range(2). |
| 1.3.6.1.4.1.3955.2.4.1.1.16 | ColumnvpnRemoteSecurityGateway | read-write | mandatory | The IP address in this field must match the public IP address (i.e. WAN IP Address) of the remote gateway at the other end of this tunnel. If the remote gatewa… |
| 1.3.6.1.4.1.3955.2.4.1.1.17 | ColumnvpnEspEncrypt | read-write | mandatory | The Encryption method determines the length of the key used to encrypt/decrypt ESP packets. Either DES or 3DES may be selected. Notice that both sides must use… |
| 1.3.6.1.4.1.3955.2.4.1.1.18 | ColumnvpnEspAuth | read-write | mandatory | Authentication, determines a method to authenticate the ESP packets. Either MD5 or SHA may be selected. Notice that both sides must use the same Authentication… |
| 1.3.6.1.4.1.3955.2.4.1.1.19 | ColumnvpnKeyMethod | read-write | mandatory | The router supports both automatic and manual key management. When choosing automatic key management, IKE(Internet Key Exchange) protocols are used to negotiat… |
| 1.3.6.1.4.1.3955.2.4.1.1.20 | ColumnvpnIsakmpPfs | read-write | mandatory | If PFS is enabled, IKE Phase 2 negotiation will generate a new key material for IP traffic encryption and authentication. Note: that both sides must have this … |
| 1.3.6.1.4.1.3955.2.4.1.1.21 | ColumnvpnIsakmpPreSharedKey | read-only | mandatory | IKE uses the Pre-shared Key field to authenticate the remote IKE peer. Both character and hexadecimal value are acceptable in this field. e.g. [My-@123] or [0x… |
| 1.3.6.1.4.1.3955.2.4.1.1.22 | ColumnvpnManualEncryptKey | read-only | mandatory | This field specifies a key used to encrypt and decrypt IP traffic. Both character and hexadecimal value are acceptable in this field. Note: that both sides mus… |
| 1.3.6.1.4.1.3955.2.4.1.1.23 | ColumnvpnManualAuthKey | read-only | mandatory | This field specifies a key used to authenticate IP traffic.Both character and hexadecimal value are acceptable in this field. Note: that both sides must use th… |
| 1.3.6.1.4.1.3955.2.4.1.1.24 | ColumnvpnManualInboundSpi | read-write | mandatory | The SPI(Security Parameter Index) is carried in the ESP header. This enables the receiver to select the SA, under which a packet should be processed. The SPI i… |
| 1.3.6.1.4.1.3955.2.4.1.1.25 | ColumnvpnManualOutboundSpi | read-write | mandatory | The SPI(Security Parameter Index) is carried in the ESP header. This enables the receiver to select the SA, under which a packet should be processed. The SPI i… |
| 1.3.6.1.4.1.3955.2.4.1.1.26 | ColumnvpnTunnelStatus | read-write | mandatory | Indicates the connection status of the selected tunnel. The state is either connected(0) or disconnected(1). |
| 1.3.6.1.4.1.3955.2.5 | NodefirewallMgt | |||
| 1.3.6.1.4.1.3955.2.5.1 | ScalarfwProtection | read-write | mandatory | Set to disable or enable the firewall function utilized on this managed node. |
| 1.3.6.1.4.1.3955.2.6 | NodewirelessMgt | |||
| 1.3.6.1.4.1.3955.2.6.1 | NodewirelessCommon | |||
| 1.3.6.1.4.1.3955.2.6.1.1 | ScalarstationMacFilter | read-write | mandatory | Set to disable(0) or enable(1) the wireless station physical address filter. |
| 1.3.6.1.4.1.3955.2.6.1.2 | ScalarapClientModeEnable | read-write | mandatory | set/get enable or disable AP client mode |
| 1.3.6.1.4.1.3955.2.6.1.3 | ScalarapClientMacNum | read-write | mandatory | set/get the numbers of AP Client MAC address list |
| 1.3.6.1.4.1.3955.2.6.1.4 | TableapClientMacTable | not-accessible | mandatory | set/get the MAC address list of AP Client |
| 1.3.6.1.4.1.3955.2.6.1.4.1 | RowapClientMacEntry | not-accessible | mandatory | A MAC address table for AP client mode. |
| 1.3.6.1.4.1.3955.2.6.1.4.1.1 | ColumnapClientMacIndex | read-only | mandatory | A index value for each MAC address. |
| 1.3.6.1.4.1.3955.2.6.1.4.1.2 | ColumnapClientMacAddress | read-write | mandatory | The MAC address. |
| 1.3.6.1.4.1.3955.2.6.1.5 | ScalarapBridgeModeEnable | read-write | mandatory | set/get enable or disable Bridge mode |
| 1.3.6.1.4.1.3955.2.6.1.6 | ScalarapBridgeMacNum | read-write | mandatory | set/get the numbers of Bridge MAC address list |
| 1.3.6.1.4.1.3955.2.6.1.7 | TableapBridgeMacTable | not-accessible | mandatory | set/get the MAC address list of Bridge |
| 1.3.6.1.4.1.3955.2.6.1.7.1 | RowapBridgeMacEntry | not-accessible | mandatory | A MAC address table for AP Bridge mode. |
| 1.3.6.1.4.1.3955.2.6.1.7.1.1 | ColumnapBridgeMacIndex | read-only | mandatory | A index value for each MAC address. |
| 1.3.6.1.4.1.3955.2.6.1.7.1.2 | ColumnapBridgeMacAddress | read-write | mandatory | The MAC address. |
| 1.3.6.1.4.1.3955.2.6.1.8 | ScalarapRepeatorModeEnable | read-write | mandatory | set/get enable or disable repeater mode |
| 1.3.6.1.4.1.3955.2.6.1.9 | ScalarapRepeatorMacNum | read-write | mandatory | set/get the numbers of repeater MAC address list |
| 1.3.6.1.4.1.3955.2.6.1.10 | TableapRepeatorMacTable | not-accessible | mandatory | set/get the MAC address list of repeater |
| 1.3.6.1.4.1.3955.2.6.1.10.1 | RowapRepeatorMacEntry | not-accessible | mandatory | A MAC address table for AP Repeator mode. |
| 1.3.6.1.4.1.3955.2.6.1.10.1.1 | ColumnapRepeatorMacIndex | read-only | mandatory | A index value for each MAC address. |
| 1.3.6.1.4.1.3955.2.6.1.10.1.2 | ColumnapRepeatorMacAddress | read-write | mandatory | The MAC address. |
| 1.3.6.1.4.1.3955.2.6.2 | Nodeieee80211b | |||
| 1.3.6.1.4.1.3955.2.6.2.1 | Scalarieee80211bBroadcastSSID | read-write | mandatory | The attribute is only valid for Access Point and the master of IBSS. When the attribute is enable, the SSID field in beacon frames is blank, also the device wi… |
| 1.3.6.1.4.1.3955.2.6.2.2 | Scalarieee80211bSSIDString | read-write | mandatory | When in read access, this attribute reflects the Service Set ID of the current wireless connection. When in write access, it is the desired Service Set ID. |
| 1.3.6.1.4.1.3955.2.6.2.3 | Scalarieee80211bChannel | read-write | mandatory | When in read access, this attribute reflects the channel number of the current wireless connection. When in write access, it is the desired channel to connect. |
| 1.3.6.1.4.1.3955.2.6.2.4 | Scalarieee80211bWep | read-write | mandatory | Specify the WEP status of device. If the attribute is set as enable, the WEP mechanism is used for transmitting data frames. |
| 1.3.6.1.4.1.3955.2.6.2.5 | Scalarieee80211bWepAuthMethod | read-write | mandatory | Specify the authentication algorithms supported by the station or AP. |
| 1.3.6.1.4.1.3955.2.6.2.6 | Scalarieee80211bWepBits | read-write | mandatory | When WEP is enabled, this attribute specifies whether 64-bit or 128-bit encryption/decryption algorithm is used. |
| 1.3.6.1.4.1.3955.2.6.2.7 | Scalarieee80211bDefaultKey | read-write | mandatory | The index of default WEP encryption key for transmission. It can be 1 to 4. |
| 1.3.6.1.4.1.3955.2.6.2.8 | Scalarieee80211bWep64bitkey1 | read-write | mandatory | The WEP key #1 value for 64-bit WEP encryption. It's HEX value in ASCII format. For example: WEP key: 0x12 0x34 0x56 0x78 0x90 is specified as '1234567890'. |
| 1.3.6.1.4.1.3955.2.6.2.9 | Scalarieee80211bWep64bitkey2 | read-write | mandatory | The WEP key #2 value for 64-bit WEP encryption. It's HEX value in ASCII format. For example: WEP key: 0x12 0x34 0x56 0x78 0x90 is specified as '1234567890'. |
| 1.3.6.1.4.1.3955.2.6.2.10 | Scalarieee80211bWep64bitkey3 | read-write | mandatory | The WEP key #3 value for 64-bit WEP encryption. It's HEX value in ASCII format. For example: WEP key: 0x12 0x34 0x56 0x78 0x90 is specified as '1234567890'. |
| 1.3.6.1.4.1.3955.2.6.2.11 | Scalarieee80211bWep64bitkey4 | read-write | mandatory | The WEP key #4 value for 64-bit WEP encryption. It's HEX value in ASCII format. For example: WEP key: 0x12 0x34 0x56 0x78 0x90 is specified as '1234567890'. |
| 1.3.6.1.4.1.3955.2.6.2.12 | Scalarieee80211bWep128bitkey1 | read-write | mandatory | The WEP key #1 value for 128-bit WEP encryption. It's HEX value in ASCII format. For example: WEP key: 0x12 0x34 0x56 0x78 0x90 is specified as '1234567890'. |
| 1.3.6.1.4.1.3955.2.6.2.13 | Scalarieee80211bWep128bitkey2 | read-write | mandatory | The WEP key #2 value for 128-bit WEP encryption. It's HEX value in ASCII format. For example: WEP key: 0x12 0x34 0x56 0x78 0x90 is specified as '1234567890'. |
| 1.3.6.1.4.1.3955.2.6.2.14 | Scalarieee80211bWep128bitkey3 | read-write | mandatory | The WEP key #3 value for 128-bit WEP encryption. It's HEX value in ASCII format. For example: WEP key: 0x12 0x34 0x56 0x78 0x90 is specified as '1234567890'. |
| 1.3.6.1.4.1.3955.2.6.2.15 | Scalarieee80211bWep128bitkey4 | read-write | mandatory | The WEP key #4 value for 128-bit WEP encryption. It's HEX value in ASCII format. For example: WEP key: 0x12 0x34 0x56 0x78 0x90 is specified as '1234567890'. |
| 1.3.6.1.4.1.3955.2.6.2.16 | Scalarieee80211bBeaconInterval | read-write | mandatory | This value specifies the beacon interval duration in miliseconds. |
| 1.3.6.1.4.1.3955.2.6.2.17 | Scalarieee80211bRTSThreshold | read-write | mandatory | This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed at the beginning of any frame exchange s… |
| 1.3.6.1.4.1.3955.2.6.2.18 | Scalarieee80211bFragmentThreshold | read-write | mandatory | This attribute shall specify the current maximum size, in octets, of the MPDU that may be delivered to PHY. An MSDU shall be broken into fragments if its size … |
| 1.3.6.1.4.1.3955.2.6.2.19 | Scalarieee80211bDTIMInterval | read-write | mandatory | Specify the number of beacon intervals that shall elapse between transmission of Beacon frames containing a TIM element whose DTIM Count field is 0. This value… |
| 1.3.6.1.4.1.3955.2.6.2.20 | Scalarieee80211bBasicRate | read-write | mandatory | The value is a bit-map of basic data rates. It specifies the basic rates used and reported for this BSS by the AP. The highest rate specified is the rate that … |
| 1.3.6.1.4.1.3955.2.6.2.21 | Scalarieee80211bTXRate | read-write | mandatory | The default transmission rate of the staion or access point. When set as auto-fallback, the tx rate auto-fallback between 11, 5.5, 2, and 1Mbps. |
| 1.3.6.1.4.1.3955.2.6.2.22 | Scalarieee80211bPreambleType | read-write | mandatory | For wireless stations, this attribute specifies whether frames are transmitted with the short or long preamble. For access points, when set to shortPreamble, i… |
| 1.3.6.1.4.1.3955.2.6.2.23 | Scalarieee80211bRadioFunction | read-write | mandatory | Enable/Disable the RF radio function. When disable, no RF signal will be generated on the air, also no RF signal will be received. But the MAC function of the … |
| 1.3.6.1.4.1.3955.2.6.2.24 | Scalarieee80211bDeviceFunction | read-write | mandatory | Enable/Disable the function of the device. When disable, not only the RF radio is turned off, but also the MAC function of wireless interface is also turned of… |
| 1.3.6.1.4.1.3955.2.6.2.25 | Scalarieee80211bDomain | read-only | mandatory | The attribute describe the regulatory domain the PLCP and PMD support in this wireless interface. |
| 1.3.6.1.4.1.3955.2.6.2.26 | Scalarieee80211bSignalStrength | read-only | mandatory | The signal strength of the current wireless connection. The unit is percentage. It's only valid for wireless station in infrastructure mode. When the link is d… |
| 1.3.6.1.4.1.3955.2.6.2.27 | Scalarieee80211bOperationMode | read-write | mandatory | Specify the type of BSS the station shall use when scanning for a BSS with which to connect. When set to infrastructure, the station shall only connect to an A… |
| 1.3.6.1.4.1.3955.2.6.2.28 | Scalarieee80211bPassPhrase | read-write | mandatory | The ASCII string used to generate the actual 4 WEP keys. The length of the attribute can be 0 to 30. The algorithm of the WEP key generation is based on the al… |
| 1.3.6.1.4.1.3955.2.6.2.29 | Scalarieee80211bLinkQuality | read-only | mandatory | The link quality of the current wireless connection. The unit is percentage. If the link is disconnected, the value should be 0. |
| 1.3.6.1.4.1.3955.2.6.3 | Nodeieee80211a | |||
| 1.3.6.1.4.1.3955.2.6.3.1 | Scalarieee80211aBroadcastSSID | read-write | mandatory | set/get enable or disable broadcast SSID |
| 1.3.6.1.4.1.3955.2.6.3.2 | Scalarieee80211aSSIDString | read-write | mandatory | set/get SSID String |
| 1.3.6.1.4.1.3955.2.6.3.3 | Scalarieee80211aChannel | read-write | mandatory | set/get Current Channel, 42/50/58 channel is for turbo mode |
| 1.3.6.1.4.1.3955.2.6.3.4 | Scalarieee80211aWep | read-write | mandatory | set/get enable or disable WEP encryption |
| 1.3.6.1.4.1.3955.2.6.3.5 | Scalarieee80211aWepauthmethod | read-write | mandatory | set/get Authentication method |
| 1.3.6.1.4.1.3955.2.6.3.6 | Scalarieee80211aDefaultKey | read-write | mandatory | set/get the default WEP KEY ID |
| 1.3.6.1.4.1.3955.2.6.3.7 | Scalarieee80211aWepbits | read-write | mandatory | set/get WEP encryption bit length |
| 1.3.6.1.4.1.3955.2.6.3.8 | Scalarieee80211aWep64bitkey1 | read-write | mandatory | set/get 64bit key 1 |
| 1.3.6.1.4.1.3955.2.6.3.9 | Scalarieee80211aWep64bitkey2 | read-write | mandatory | set/get 64bit key 2 |
| 1.3.6.1.4.1.3955.2.6.3.10 | Scalarieee80211aWep64bitkey3 | read-write | mandatory | set/get 64bit key 3 |
| 1.3.6.1.4.1.3955.2.6.3.11 | Scalarieee80211aWep64bitkey4 | read-write | mandatory | set/get 64bit key 4 |
| 1.3.6.1.4.1.3955.2.6.3.12 | Scalarieee80211aWep128bitkey1 | read-write | mandatory | set/get 128 bit key 1 |
| 1.3.6.1.4.1.3955.2.6.3.13 | Scalarieee80211aWep128bitkey2 | read-write | mandatory | set/get 128 bit key 2 |
| 1.3.6.1.4.1.3955.2.6.3.14 | Scalarieee80211aWep128bitkey3 | read-write | mandatory | set/get 128 bit key 3 |
| 1.3.6.1.4.1.3955.2.6.3.15 | Scalarieee80211aWep128bitkey4 | read-write | mandatory | set/get 128 bit key 4 |
| 1.3.6.1.4.1.3955.2.6.3.16 | Scalarieee80211aWep152bitkey1 | read-write | mandatory | set/get 152 bit key 1 |
| 1.3.6.1.4.1.3955.2.6.3.17 | Scalarieee80211aWep152bitkey2 | read-write | mandatory | set/get 152 bit key 2 |
| 1.3.6.1.4.1.3955.2.6.3.18 | Scalarieee80211aWep152bitkey3 | read-write | mandatory | set/get 152 bit key 3 |
| 1.3.6.1.4.1.3955.2.6.3.19 | Scalarieee80211aWep152bitkey4 | read-write | mandatory | set/get 152 bit key 4 |
| 1.3.6.1.4.1.3955.2.6.3.20 | Scalarieee80211aBeaconInterval | read-write | mandatory | set/get Beacon Interval |
| 1.3.6.1.4.1.3955.2.6.3.21 | Scalarieee80211aRTSThreshold | read-write | mandatory | set/get RTS Threshold |
| 1.3.6.1.4.1.3955.2.6.3.22 | Scalarieee80211aFragmentThreshold | read-write | mandatory | set/get Fragmentation Threshold |
| 1.3.6.1.4.1.3955.2.6.3.23 | Scalarieee80211aDTIMInterval | read-write | mandatory | set/get DTIM Interval |
| 1.3.6.1.4.1.3955.2.6.3.24 | Scalarieee80211aBasicRate | read-write | mandatory | set/get Basic rate |
| 1.3.6.1.4.1.3955.2.6.3.25 | Scalarieee80211aTXRate | read-write | mandatory | set/get Transmit rate |
| 1.3.6.1.4.1.3955.2.6.3.26 | Scalarieee80211aTurboMode | read-write | current | set/get enable or disable turbo mode |
| 1.3.6.1.4.1.3955.2.6.3.27 | Scalarieee80211aPhyOFDMEnable | read-write | current | set/get enable or disable OFDM modulation |
| 1.3.6.1.4.1.3955.2.6.3.28 | Scalarieee80211aPhyOFDMAutoChannelSelect | read-write | current | set/get enable or disable auto find the channel with less interference |
| 1.3.6.1.4.1.3955.2.6.3.29 | Scalarieee80211aRadioFunction | read-write | mandatory | set/get enable or disable radio function |
| 1.3.6.1.4.1.3955.2.6.3.30 | Scalarieee80211aDeviceFunction | read-write | mandatory | set/get enable or disable device |
| 1.3.6.1.4.1.3955.2.6.3.31 | Scalarieee80211aDomain | read-only | mandatory | Get regular domain |
| 1.3.6.1.4.1.3955.2.6.3.32 | Scalarieee80211aSignalStrength | read-only | mandatory | Get signal strength (for NIC) |
| 1.3.6.1.4.1.3955.2.6.3.33 | Scalarieee80211aOperationMode | read-write | mandatory | set/get The operation mode of this NIC. |
| 1.3.6.1.4.1.3955.2.6.3.34 | Scalarieee80211aLinkQuality | read-only | mandatory | Get the link quality of this NIC. |
| 1.3.6.1.4.1.3955.2.7 | NodeadslRemoteNode | |||
| 1.3.6.1.4.1.3955.2.7.1 | ScalarremoteNodeNumber | read-only | mandatory | The number of network interfaces (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.3955.2.7.2 | ScalarremoteNodeErrString | read-only | mandatory | The error status of saving one remote node settings. The string will clear once it is accessed from the SNMP server. |
| 1.3.6.1.4.1.3955.2.7.3 | TableremoteNodeStatusTable | not-accessible | mandatory | A list of remote node status entries. |
| 1.3.6.1.4.1.3955.2.7.3.1 | RowremoteNodeStatusEntry | not-accessible | mandatory | An remote node status entry containing comment object for a remote node status. |
| 1.3.6.1.4.1.3955.2.7.3.1.1 | ColumnremoteNodeStatusIndex | read-only | mandatory | The index of remote node status entry. |
| 1.3.6.1.4.1.3955.2.7.3.1.2 | ColumnremoteNodeStatusIfIndex | read-only | deprecated | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.4.1.3955.2.7.3.1.3 | ColumnremoteNodeStatus | read-write | mandatory | This object allows you to activate/deactivate/delete this remote node. |
| 1.3.6.1.4.1.3955.2.7.3.1.4 | ColumnremoteNodeISPnode | read-write | mandatory | The object allows you to set the remote node to ISP node. |
| 1.3.6.1.4.1.3955.2.7.4 | TableremoteNodeGeneralTable | not-accessible | mandatory | A list of remote node general entries. |
| 1.3.6.1.4.1.3955.2.7.4.1 | RowremoteNodeGeneralEntry | not-accessible | mandatory | An remote node general entry containing comment object for a remote node general information. |
| 1.3.6.1.4.1.3955.2.7.4.1.1 | ColumnremoteNodeGeneralIndex | read-only | mandatory | The index of remote node general entry. |
| 1.3.6.1.4.1.3955.2.7.4.1.2 | ColumnremoteNodeGeneralIfIndex | read-only | deprecated | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.4.1.3955.2.7.4.1.3 | ColumnremoteNodeName | read-write | mandatory | The name of the Internet service provider. This information is for identification purpose only. |
| 1.3.6.1.4.1.3955.2.7.4.1.4 | ColumnremoteNodeEncap | read-write | mandatory | This if the method of encapsulation used by the ISP. |
| 1.3.6.1.4.1.3955.2.7.4.1.5 | ColumnremoteNodeMultiplex | read-write | mandatory | This if the methos of multiplexing used by the ISP. Choices are vc-based or llc-based |
| 1.3.6.1.4.1.3955.2.7.4.1.6 | ColumnremoteNodeServiceName | read-write | mandatory | The PPPoE service name. This is valid only when PPPoE encapsulation is chosen. |
| 1.3.6.1.4.1.3955.2.7.4.1.7 | ColumnremoteNodeAuthen | read-write | mandatory | This object sets the authentication protocol used for outgoing calls. Options for this object are : chap/pap - Your Device will accept CHAP or PAP. chap - Your… |
| 1.3.6.1.4.1.3955.2.7.4.1.8 | ColumnremoteNodeRoute | read-write | mandatory | This object determines the protocol that your Device will route. Choices are IP or none. |
| 1.3.6.1.4.1.3955.2.7.4.1.9 | ColumnremoteNodeBridge | read-write | mandatory | Bridging is used for protocols that the Device does not route, e.g. SNA, or not truned on in the previous Route object. When bridging is enabled, your Device w… |
| 1.3.6.1.4.1.3955.2.7.5 | TableremoteNodeATMTable | not-accessible | mandatory | A list of remote node ATM entries. |
| 1.3.6.1.4.1.3955.2.7.5.1 | RowremoteNodeATMEntry | not-accessible | mandatory | An remote node ATM entry containing comment object for a remote node ATM information. |
| 1.3.6.1.4.1.3955.2.7.5.1.1 | ColumnremoteNodeATMIndex | read-write | mandatory | The index of remote node ATM entry. |
| 1.3.6.1.4.1.3955.2.7.5.1.2 | ColumnremoteNodeATMIfIndex | read-only | deprecated | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.4.1.3955.2.7.5.1.3 | ColumnremoteNodeVPI | read-write | mandatory | The Virtual Path Identifier(VPI) is supplied by your telephone company. The valid range for the VPI is 0 to 255. |
| 1.3.6.1.4.1.3955.2.7.5.1.4 | ColumnremoteNodeVCI | read-write | mandatory | The Virtual Channel Identifier(VCI) number is supplied by your telephone company. The valid range is 32 to 65535. |
| 1.3.6.1.4.1.3955.2.7.5.1.5 | ColumnremoteNodeQosType | read-write | mandatory | This is the ATM Qos Type. There are 2 options: cbr and ubr. cbr (Continuous Bit Rate) specifys fixed (always-on) bandwidth. UBR (Unspecified Bit Rage) is for a… |
| 1.3.6.1.4.1.3955.2.7.5.1.6 | ColumnremoteNodePCR | read-write | mandatory | This is the maximum rate at shich the sender can send cells. |
| 1.3.6.1.4.1.3955.2.7.5.1.7 | ColumnremoteNodeSCR | read-write | mandatory | Sustained Cell Rate (SCR) is the mean cell rate of a bursty, on-off traffic source that can be sent at the peak rate, and a parameter for burst-type traffic. T… |
| 1.3.6.1.4.1.3955.2.7.5.1.8 | ColumnremoteNodeMBS | read-write | mandatory | MBS is the Maximum Burst Size of cells that can be sent at the peak rate. The MBS must be less than 65535 |
| 1.3.6.1.4.1.3955.3 | Nodecontrol | |||
| 1.3.6.1.4.1.3955.3.1 | TablefilterIPRangeTable | not-accessible | mandatory | A list of filter IP range entry. |
| 1.3.6.1.4.1.3955.3.1.1 | RowfilterIPRangeEntry | not-accessible | mandatory | Filter IP range entry can be used to block specific internal users from accessing the Internet. Each entry has start IP and end IP settings, if user's IP is in… |
| 1.3.6.1.4.1.3955.3.1.1.1 | ColumnfilterIPRangeIndex | read-only | mandatory | Index of filter IP range table. |
| 1.3.6.1.4.1.3955.3.1.1.2 | ColumnfilterIPStart | read-write | mandatory | Start IP address of filter IP range entry. |
| 1.3.6.1.4.1.3955.3.1.1.3 | ColumnfilterIPEnd | read-write | mandatory | End IP address of filter IP range entry. |
| 1.3.6.1.4.1.3955.3.2 | TablefilterPortRangeTable | not-accessible | mandatory | A list of filter port range entry. |
| 1.3.6.1.4.1.3955.3.2.1 | RowfilterPortRangeEntry | not-accessible | mandatory | Filter port range entry can be used to block specific packets from going out to Internet. Each entry has protocol and port range settings, if out-going packet'… |
| 1.3.6.1.4.1.3955.3.2.1.1 | ColumnfilterPortRangeIndex | read-only | mandatory | Index of filter port range table. |
| 1.3.6.1.4.1.3955.3.2.1.2 | ColumnfilterPortProto | read-write | mandatory | Protocol setting of FilterPortRangeEntry, it can be TCP, UDP or both (TCP and UDP). |
| 1.3.6.1.4.1.3955.3.2.1.3 | ColumnfilterPortStart | read-write | mandatory | Start port setting of FilterPortRangeEntry |
| 1.3.6.1.4.1.3955.3.2.1.4 | ColumnfilterPortEnd | read-write | mandatory | End port setting of FilterPortRangeEntry |
| 1.3.6.1.4.1.3955.3.3 | TablefilterMACTable | not-accessible | mandatory | A list of filter Mac entry. |
| 1.3.6.1.4.1.3955.3.3.1 | RowfilterMACEntry | not-accessible | mandatory | Filter MAC range entry can be used to block specific internal users from accessing the Internet. Each entry has a MAC setting, if user's MAC is identical with … |
| 1.3.6.1.4.1.3955.3.3.1.1 | ColumnfilterMACIndex | read-only | mandatory | Index of filterMACTable. |
| 1.3.6.1.4.1.3955.3.3.1.2 | ColumnfilterMAC | read-write | mandatory | The MAC setting of filterMACEntry. |
| 1.3.6.1.4.1.3955.3.4 | TableforwardTable | not-accessible | mandatory | A list of forwardEntry. |
| 1.3.6.1.4.1.3955.3.4.1 | RowforwardEntry | not-accessible | mandatory | You can use Forwarding to set up public services on your network. When user send this type of request to your network via the Internet, the router will forward… |
| 1.3.6.1.4.1.3955.3.4.1.1 | ColumnforwardIndex | read-only | mandatory | Index of forwardTable |
| 1.3.6.1.4.1.3955.3.4.1.2 | ColumnservicePortStart | read-write | mandatory | The start port setting of forward public service port range. |
| 1.3.6.1.4.1.3955.3.4.1.3 | ColumnservicePortEnd | read-write | mandatory | The end port setting of forward public service port range. |
| 1.3.6.1.4.1.3955.3.4.1.4 | ColumnservicePortProto | read-write | mandatory | The protocol setting of forward public service port range. |
| 1.3.6.1.4.1.3955.3.4.1.5 | ColumnforwardIPAddress | read-write | mandatory | The LAN side forward server IP address. |
| 1.3.6.1.4.1.3955.3.5 | TableportTriggeringTable | not-accessible | mandatory | A list of portTriggeringEntry |
| 1.3.6.1.4.1.3955.3.5.1 | RowportTriggeringEntry | not-accessible | mandatory | Port triggering allows the Router to watch outgoing data for specific port numbers. The IP address of the computer that sends the matching data is remembered b… |
| 1.3.6.1.4.1.3955.3.5.1.1 | ColumnportTriggeringIndex | read-only | mandatory | Index of portTriggeringTable. |
| 1.3.6.1.4.1.3955.3.5.1.2 | ColumnappName | read-write | mandatory | Name description of this portTriggeringEntry. |
| 1.3.6.1.4.1.3955.3.5.1.3 | ColumntriggerPortStart | read-write | mandatory | The start port of triggering port range. |
| 1.3.6.1.4.1.3955.3.5.1.4 | ColumntriggerPortEnd | read-write | mandatory | The end port of triggering port range. |
| 1.3.6.1.4.1.3955.3.5.1.5 | ColumnincomingPortStart | read-write | mandatory | The start port of incoming port range. |
| 1.3.6.1.4.1.3955.3.5.1.6 | ColumnincomingPortEnd | read-write | mandatory | The end port of incoming port range. |
| 1.3.6.1.4.1.3955.3.6 | TablewlanAccessMACTable | not-accessible | mandatory | Table of wireless station physical addresses that will put under control. |
| 1.3.6.1.4.1.3955.3.6.1 | RowwlanAccessMACEntry | not-accessible | mandatory | An entry in the table controls the assocaition with access point for each wireless station. |
| 1.3.6.1.4.1.3955.3.6.1.1 | ColumnwlanAccessMACIndex | read-only | mandatory | An unique value for each wireless station. |
| 1.3.6.1.4.1.3955.3.6.1.2 | ColumnwlanAccessMAC | read-write | mandatory | Specifies the physical address to which will be controlled the association state with the access point. |
| 1.3.6.1.4.1.3955.3.6.1.3 | ColumnwlanAccessStatus | read-write | mandatory | Indicates the association state with the access point for the specified wireless client. |
| 1.3.6.1.4.1.3955.3.7 | TableuPnPforwardTable | not-accessible | mandatory | A list of UPnP forwarding application setting entry. |
| 1.3.6.1.4.1.3955.3.7.1 | RowuPnPforwardEntry | not-accessible | mandatory | UPnP forwarding entry can be used to preset application setting as well as options for customization of port services for other applications. |
| 1.3.6.1.4.1.3955.3.7.1.1 | ColumnuPnPforwardIndex | read-only | mandatory | An unique value for each UPnP forwarding setting. |
| 1.3.6.1.4.1.3955.3.7.1.2 | ColumnuPnPserviceName | read-write | mandatory | Indicates the most widely used Internet applicaiton name. Such as FTP, Telnet, SMTP and DNS. |
| 1.3.6.1.4.1.3955.3.7.1.3 | ColumnuPnPExtPort | read-write | mandatory | Specifies the external port number used by Internet application server. Check with the Internet application software documentation for more information. |
| 1.3.6.1.4.1.3955.3.7.1.4 | ColumnuPnPservicePortProto | read-write | mandatory | Specifies the Transport layer protocol to which this Internet application will use. |
| 1.3.6.1.4.1.3955.3.7.1.5 | ColumnuPnPIntPort | read-write | mandatory | Specifies the internal port number used by Internet application server. Check with the Internet application software documentation for more information. |
| 1.3.6.1.4.1.3955.3.7.1.6 | ColumnuPnPforwardIPAddress | read-write | mandatory | Specifies the IP address of Internet application server to which the Internet users can access. |
| 1.3.6.1.4.1.3955.3.7.1.7 | ColumnuPnPforwardStatus | read-write | mandatory | Indicates whether to enable the defined service. |
| 1.3.6.1.4.1.3955.4 | Nodeinformation | |||
| 1.3.6.1.4.1.3955.4.1 | NodestatusInfo | |||
| 1.3.6.1.4.1.3955.4.1.1 | TabledhcpActiveTable | not-accessible | mandatory | A list of dhcpActiveEntry. |
| 1.3.6.1.4.1.3955.4.1.1.1 | RowdhcpActiveEntry | not-accessible | mandatory | The dhcpActiveEntry shows out the information of DHCP client PCs. |
| 1.3.6.1.4.1.3955.4.1.1.1.1 | ColumndhcpActiveIndex | read-only | mandatory | The index of dhcpActiveTable. |
| 1.3.6.1.4.1.3955.4.1.1.1.2 | ColumndhcpClientHostName | read-only | mandatory | The host name of DHCP client PC. |
| 1.3.6.1.4.1.3955.4.1.1.1.3 | ColumndhcpNetAddress | read-only | mandatory | The IP address of DHCP client PC. |
| 1.3.6.1.4.1.3955.4.1.1.1.4 | ColumndhcpPhysicalAddress | read-only | mandatory | The MAC address of DHCP client PC. |
| 1.3.6.1.4.1.3955.4.1.2 | TableoutgoingLogTable | not-accessible | mandatory | A list of outgoingLogEntry. |
| 1.3.6.1.4.1.3955.4.1.2.1 | RowoutgoingLogEntry | not-accessible | mandatory | The outgoing log entry lists the IP address of Internet site that users on your network have accessed. |
| 1.3.6.1.4.1.3955.4.1.2.1.1 | ColumnoutgoingLogIndex | read-only | mandatory | The index of outgoingLogTable |
| 1.3.6.1.4.1.3955.4.1.2.1.2 | ColumnsourceIPLAN | read-only | mandatory | The source IP address of the outgoing log entry. |
| 1.3.6.1.4.1.3955.4.1.2.1.3 | ColumndestinationIP | read-only | mandatory | The destination IP address of the outgoing log entry. |
| 1.3.6.1.4.1.3955.4.1.2.1.4 | ColumnservicePortNumber | read-only | mandatory | The destination port number of the outgoing log entry. |
| 1.3.6.1.4.1.3955.4.1.3 | TableincomingLogTable | not-accessible | mandatory | A list of incomingLogEntry. |
| 1.3.6.1.4.1.3955.4.1.3.1 | RowincomingLogEntry | not-accessible | mandatory | The incoming log entry shows out the log of incoming Internet traffic. |
| 1.3.6.1.4.1.3955.4.1.3.1.1 | ColumnincomingLogIndex | read-only | mandatory | Index of incomingLogTable. |
| 1.3.6.1.4.1.3955.4.1.3.1.2 | ColumnsourceIP | read-only | mandatory | The source IP address of incoming log entry. |
| 1.3.6.1.4.1.3955.4.1.3.1.3 | ColumndestinationPortNumber | read-only | mandatory | The destination port number of incoming log entry. |
| 1.3.6.1.4.1.3955.4.1.4 | TableinfWANStatusTable | not-accessible | mandatory | Table of WAN connection status. |
| 1.3.6.1.4.1.3955.4.1.4.1 | RowinfWANStatusEntry | not-accessible | mandatory | An entry in the table, containing connection status of one WAN interface. |
| 1.3.6.1.4.1.3955.4.1.4.1.1 | ColumninfWANStatusIndex | read-only | deprecated | Index of infWANStatusTable. |
| 1.3.6.1.4.1.3955.4.1.4.1.2 | ColumninfWANPortStatus | read-only | mandatory | Show the WAN Port physical link status |
| 1.3.6.1.4.1.3955.4.1.4.1.3 | ColumninfWANPPPoEFailureCode | read-only | mandatory | Show out the WAN PPPoE connection status. |
| 1.3.6.1.4.1.3955.4.1.4.1.4 | ColumninfWANPPPoEDetailErrorCode | read-only | mandatory | Detail error code of the current PPPoE connection. |
| 1.3.6.1.4.1.3955.4.1.4.1.5 | ColumninfWANDHCPStatus | read-only | mandatory | Show out the status of WAN DHCP. |
| 1.3.6.1.4.1.3955.4.1.4.1.6 | ColumninfWANDHCPDetailErrorCode | read-only | mandatory | Detail error code of the current DHCP connection. |
| 1.3.6.1.4.1.3955.4.1.4.1.7 | ColumninfWANDNSStatus | read-only | mandatory | Show the WAN DNS status. |
| 1.3.6.1.4.1.3955.4.1.4.1.8 | ColumninfWANPPTPFailureCode | read-only | mandatory | Show the WAN PPTP connection status. |
| 1.3.6.1.4.1.3955.4.1.4.1.9 | ColumninfWANPPTPDetailErrorCode | read-only | mandatory | Detail error code of the current PPTP connection. |
| 1.3.6.1.4.1.3955.4.1.5 | ScalarinfNodeWLANStatus | read-only | mandatory | Show the WLAN status. |
| 1.3.6.1.4.1.3955.4.1.6 | ScalarnicDevicePresent | read-only | mandatory | The target device is present on the system or not. |
| 1.3.6.1.4.1.3955.4.1.7 | ScalarnicDriverInstallation | read-only | mandatory | The driver was installed or not. |
| 1.3.6.1.4.1.3955.4.1.8 | ScalarnicDriverStatus | read-only | mandatory | The working status of the driver. |
| 1.3.6.1.4.1.3955.4.1.9 | ScalarnicConnectionStatus | read-only | mandatory | The connection status of the device. |
| 1.3.6.1.4.1.3955.4.1.10 | ScalarnicOSVersion | read-only | mandatory | The version number of the Windows OS. |
| 1.3.6.1.4.1.3955.4.1.11 | ScalarnicDriverVersion | read-only | mandatory | The version number of the device driver |
| 1.3.6.1.4.1.3955.4.1.12 | ScalarnicFirmwareVersion | read-only | mandatory | The version number of the device firmware |
| 1.3.6.1.4.1.3955.4.1.13 | ScalarnicUtilityVersion | read-only | mandatory | The version number of the configure Utility |
| 1.3.6.1.4.1.3955.4.2 | NodestatisticsInfo | |||
| 1.3.6.1.4.1.3955.5 | Nodeproducts | |||
| 1.3.6.1.4.1.3955.5.1 | NodeprintServer | |||
| 1.3.6.1.4.1.3955.5.2 | NodenetworkStorageServer |