LLDP-EXT-DOT3-MIB
59 objects
The LLDP Management Information Base extension module for IEEE 802.3 organizationally defined discovery information. In order to assure the uniqueness of the LLDP-MIB, lldpXdot3MIB is branched from lldpExtensions using OUI value as the node. An OUI/'company_id' is a 24 bit globally unique assigned number referenced by various standards. Copyright (C) IEEE (2005). This version of this MIB module is published as Annex G.6.1 of IEEE Std 802.1AB-2005; see the standard itself for full legal notices.
Imported Objects
| LLDP-MIB | lldpExtensions lldpLocPortNum lldpPortConfigEntry lldpRemIndex lldpRemLocalPortNum lldpRemTimeMark |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.0.8802.1.1.2.1.5.4623 | IdentitylldpXdot3MIB | The LLDP Management Information Base extension module for IEEE 802.3 organizationally defined discovery information. In order to assure the uniqueness of the L… | ||
| 1.0.8802.1.1.2.1.5.4623.1 | NodelldpXdot3Objects | |||
| 1.0.8802.1.1.2.1.5.4623.1.1 | NodelldpXdot3Config | |||
| 1.0.8802.1.1.2.1.5.4623.1.1.1 | TablelldpXdot3PortConfigTable | not-accessible | current | A table that controls selection of LLDP TLVs to be transmitted on individual ports. |
| 1.0.8802.1.1.2.1.5.4623.1.1.1.1 | RowlldpXdot3PortConfigEntry | not-accessible | current | LLDP configuration information that controls the transmission of IEEE 802.3 organizationally defined TLVs on LLDP transmission capable ports. This configuratio… |
| 1.0.8802.1.1.2.1.5.4623.1.1.1.1.1 | ColumnlldpXdot3PortConfigTLVsTxEnable | read-write | current | The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.3 organizationally defined set of LLDP TLVs whose transmission is allowed on th… |
| 1.0.8802.1.1.2.1.5.4623.1.2 | NodelldpXdot3LocalData | |||
| 1.0.8802.1.1.2.1.5.4623.1.2.1 | TablelldpXdot3LocPortTable | not-accessible | current | This table contains one row per port of Ethernet port information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agen… |
| 1.0.8802.1.1.2.1.5.4623.1.2.1.1 | RowlldpXdot3LocPortEntry | not-accessible | current | Information about a particular port component. |
| 1.0.8802.1.1.2.1.5.4623.1.2.1.1.1 | ColumnlldpXdot3LocPortAutoNegSupported | read-only | current | The truth value used to indicate whether the given port (associated with the local system) supports Auto-negotiation. |
| 1.0.8802.1.1.2.1.5.4623.1.2.1.1.2 | ColumnlldpXdot3LocPortAutoNegEnabled | read-only | current | The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the local system. |
| 1.0.8802.1.1.2.1.5.4623.1.2.1.1.3 | ColumnlldpXdot3LocPortAutoNegAdvertisedCap | read-only | current | This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the l… |
| 1.0.8802.1.1.2.1.5.4623.1.2.1.1.4 | ColumnlldpXdot3LocPortOperMauType | read-only | current | An integer value that indicates the operational MAU type of the given port on the local system. This object contains the integer value derived from the list po… |
| 1.0.8802.1.1.2.1.5.4623.1.2.2 | TablelldpXdot3LocPowerTable | not-accessible | current | This table contains one row per port of power ethernet information (as a part of the LLDP 802.3 organizational extension) on the local system known to this age… |
| 1.0.8802.1.1.2.1.5.4623.1.2.2.1 | RowlldpXdot3LocPowerEntry | not-accessible | current | Information about a particular port component. |
| 1.0.8802.1.1.2.1.5.4623.1.2.2.1.1 | ColumnlldpXdot3LocPowerPortClass | read-only | current | The value that identifies the port Class of the given port associated with the local system. |
| 1.0.8802.1.1.2.1.5.4623.1.2.2.1.2 | ColumnlldpXdot3LocPowerMDISupported | read-only | current | The truth value used to indicate whether the MDI power is supported on the given port associated with the local system. |
| 1.0.8802.1.1.2.1.5.4623.1.2.2.1.3 | ColumnlldpXdot3LocPowerMDIEnabled | read-only | current | The truth value used to identify whether MDI power is enabled on the given port associated with the local system. |
| 1.0.8802.1.1.2.1.5.4623.1.2.2.1.4 | ColumnlldpXdot3LocPowerPairControlable | read-only | current | The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair sel… |
| 1.0.8802.1.1.2.1.5.4623.1.2.2.1.5 | ColumnlldpXdot3LocPowerPairs | read-only | current | This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the local system. |
| 1.0.8802.1.1.2.1.5.4623.1.2.2.1.6 | ColumnlldpXdot3LocPowerClass | read-only | current | This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the local sy… |
| 1.0.8802.1.1.2.1.5.4623.1.2.3 | TablelldpXdot3LocLinkAggTable | not-accessible | current | This table contains one row per port of link aggregation information (as a part of the LLDP 802.3 organizational extension) on the local system known to this a… |
| 1.0.8802.1.1.2.1.5.4623.1.2.3.1 | RowlldpXdot3LocLinkAggEntry | not-accessible | current | Link Aggregation information about a particular port component. |
| 1.0.8802.1.1.2.1.5.4623.1.2.3.1.1 | ColumnlldpXdot3LocLinkAggStatus | read-only | current | The bitmap value contains the link aggregation capabilities and the current aggregation status of the link. |
| 1.0.8802.1.1.2.1.5.4623.1.2.3.1.2 | ColumnlldpXdot3LocLinkAggPortId | read-only | current | This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port… |
| 1.0.8802.1.1.2.1.5.4623.1.2.4 | TablelldpXdot3LocMaxFrameSizeTable | not-accessible | current | This table contains one row per port of maximum frame size information (as a part of the LLDP 802.3 organizational extension) on the local system known to this… |
| 1.0.8802.1.1.2.1.5.4623.1.2.4.1 | RowlldpXdot3LocMaxFrameSizeEntry | not-accessible | current | Maximum Frame Size information about a particular port component. |
| 1.0.8802.1.1.2.1.5.4623.1.2.4.1.1 | ColumnlldpXdot3LocMaxFrameSize | read-only | current | An integer value indicating the maximum supported frame size in octets on the given port of the local system. |
| 1.0.8802.1.1.2.1.5.4623.1.3 | NodelldpXdot3RemoteData | |||
| 1.0.8802.1.1.2.1.5.4623.1.3.1 | TablelldpXdot3RemPortTable | not-accessible | current | This table contains Ethernet port information (as a part of the LLDP 802.3 organizational extension) of the remote system. |
| 1.0.8802.1.1.2.1.5.4623.1.3.1.1 | RowlldpXdot3RemPortEntry | not-accessible | current | Information about a particular physical network connection. |
| 1.0.8802.1.1.2.1.5.4623.1.3.1.1.1 | ColumnlldpXdot3RemPortAutoNegSupported | read-only | current | The truth value used to indicate whether the given port (associated with remote system) supports Auto-negotiation. |
| 1.0.8802.1.1.2.1.5.4623.1.3.1.1.2 | ColumnlldpXdot3RemPortAutoNegEnabled | read-only | current | The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the remote system. |
| 1.0.8802.1.1.2.1.5.4623.1.3.1.1.3 | ColumnlldpXdot3RemPortAutoNegAdvertisedCap | read-only | current | This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the r… |
| 1.0.8802.1.1.2.1.5.4623.1.3.1.1.4 | ColumnlldpXdot3RemPortOperMauType | read-only | current | An integer value that indicates the operational MAU type of the sending device. This object contains the integer value derived from the list position of the co… |
| 1.0.8802.1.1.2.1.5.4623.1.3.2 | TablelldpXdot3RemPowerTable | not-accessible | current | This table contains Ethernet power information (as a part of the LLDP 802.3 organizational extension) of the remote system. |
| 1.0.8802.1.1.2.1.5.4623.1.3.2.1 | RowlldpXdot3RemPowerEntry | not-accessible | current | Information about a particular physical network connection. |
| 1.0.8802.1.1.2.1.5.4623.1.3.2.1.1 | ColumnlldpXdot3RemPowerPortClass | read-only | current | The value that identifies the port Class of the given port associated with the remote system. |
| 1.0.8802.1.1.2.1.5.4623.1.3.2.1.2 | ColumnlldpXdot3RemPowerMDISupported | read-only | current | The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system. |
| 1.0.8802.1.1.2.1.5.4623.1.3.2.1.3 | ColumnlldpXdot3RemPowerMDIEnabled | read-only | current | The truth value used to identify whether MDI power is enabled on the given port associated with the remote system. |
| 1.0.8802.1.1.2.1.5.4623.1.3.2.1.4 | ColumnlldpXdot3RemPowerPairControlable | read-only | current | The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair sel… |
| 1.0.8802.1.1.2.1.5.4623.1.3.2.1.5 | ColumnlldpXdot3RemPowerPairs | read-only | current | This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the remote system. |
| 1.0.8802.1.1.2.1.5.4623.1.3.2.1.6 | ColumnlldpXdot3RemPowerClass | read-only | current | This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the remote s… |
| 1.0.8802.1.1.2.1.5.4623.1.3.3 | TablelldpXdot3RemLinkAggTable | not-accessible | current | This table contains port link aggregation information (as a part of the LLDP 802.3 organizational extension) of the remote system. |
| 1.0.8802.1.1.2.1.5.4623.1.3.3.1 | RowlldpXdot3RemLinkAggEntry | not-accessible | current | Link Aggregation information about remote system's port component. |
| 1.0.8802.1.1.2.1.5.4623.1.3.3.1.1 | ColumnlldpXdot3RemLinkAggStatus | read-only | current | The bitmap value contains the link aggregation capabilities and the current aggregation status of the link. |
| 1.0.8802.1.1.2.1.5.4623.1.3.3.1.2 | ColumnlldpXdot3RemLinkAggPortId | read-only | current | This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port… |
| 1.0.8802.1.1.2.1.5.4623.1.3.4 | TablelldpXdot3RemMaxFrameSizeTable | not-accessible | current | This table contains one row per port of maximum frame size information (as a part of the LLDP 802.3 organizational extension) of the remote system. |
| 1.0.8802.1.1.2.1.5.4623.1.3.4.1 | RowlldpXdot3RemMaxFrameSizeEntry | not-accessible | current | Maximum Frame Size information about a particular port component. |
| 1.0.8802.1.1.2.1.5.4623.1.3.4.1.1 | ColumnlldpXdot3RemMaxFrameSize | read-only | current | An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system. |
| 1.0.8802.1.1.2.1.5.4623.2 | NodelldpXdot3Conformance | |||
| 1.0.8802.1.1.2.1.5.4623.2.1 | NodelldpXdot3Compliances | |||
| 1.0.8802.1.1.2.1.5.4623.2.1.1 | CompliancelldpXdot3Compliance | current | The compliance statement for SNMP entities which implement the LLDP 802.3 organizational extension MIB. | |
| 1.0.8802.1.1.2.1.5.4623.2.2 | NodelldpXdot3Groups | |||
| 1.0.8802.1.1.2.1.5.4623.2.2.1 | GrouplldpXdot3ConfigGroup | current | The collection of objects which are used to configure the LLDP 802.3 organizational extension implementation behavior. This group is mandatory for agents which… | |
| 1.0.8802.1.1.2.1.5.4623.2.2.2 | GrouplldpXdot3LocSysGroup | current | The collection of objects which are used to represent LLDP 802.3 organizational extension Local Device Information. This group is mandatory for agents which im… | |
| 1.0.8802.1.1.2.1.5.4623.2.2.3 | GrouplldpXdot3RemSysGroup | current | The collection of objects which are used to represent LLDP 802.3 organizational extension Local Device Information. This group is mandatory for agents which im… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| LldpLinkAggStatusMap | BITS { aggCapable(0), aggEnabled(1) } | current | This TC describes the link aggregation status. The bit 'aggCapable(0)' indicates the link is capable of being aggregated. The bit 'aggEnabled(1)' indicates the link is currently in aggregation. |
| LldpPowerPortClass | INTEGER { pClassPSE(1), pClassPD(2) } | current | This TC describes the Power over Ethernet (PoE) port class. |