LUM-TC
81 objects
Common textual conventions.
Imported Objects
| LUM-REG | lumModules |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8708.1.1.2 | IdentitylumTcModule | Common textual conventions. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Activated | INTEGER { activated (1), deactivated (2), notApplicable (2147483647) } | current | The attribute is activated, de-activated or notApplicable. activated - the attribute is activated deactivated - the attribute is not activated notApplicable - used to tell that attribute is not used in current configura… |
| AdminStatus | INTEGER { down (1), up (2) } | current | The administrative state with only up and down. down - The interface should be inactive. up - The interface should be activated. |
| AdminStatusWithNA | INTEGER { down (1), service (2), up (3), notApplicable (2147483647) } | current | The administrative state for an interface. down - The interface should be inactive. service - The board/interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service… |
| AutoAlarmStatus | INTEGER { suppressTrxAndSignal (1), suppressSignal (2), suppressNone (3), notApplicable (2147483647) } | current | The auto alarm enable function is in state suppressTrxSignal, suppressSignal, suppressNone or not Applicable. suppressTrxAndSignal - Both signal alarms and trx alarms are suppressed suppressSignal - Only signal alarms a… |
| AutoNegotiationStatus | INTEGER { incomplete (1), halfDuplex (2), fullDuplex (3), halfDuplexRxPauseOn (4), halfDuplexTxPauseOn (5), halfDuplexRxTxPauseOn (6), fullDuplexRxPauseOn (7), fullDuplexTxPauseOn (8), fullDuplexRxTxPauseOn (9), fullDuplexFec (10), fec (11), notAvailable (2147483646), notApplicable (2147483647) } | current | The result of the auto negotiation procedure incomplete - the result is still pending halfDuplex - half duplex fullDuplex - full duplex halfDuplexRxPauseOn - half duplex, Rx pause on halfDuplexTxPauseOn - half duplex, T… |
| AuType | INTEGER { au4Type64c (0), au4Type16c (1), au4Type4c (2), au4 (3), au3 (4) } | current | Type of administrative unit (AU). |
| BerLevel | INTEGER { rxBerLevel1 (12), rxBerLevel2 (13), rxBerLevel3 (15) } | current | Predefined BER levels for signal degraded alarm rxBerLevel1 = 1E-12 rxBerLevel2 = 1E-13 rxBerLevel3 = 1E-15 |
| BerLevelMTOSI | INTEGER { osnrMargin1 (5), osnrMargin2 (10), rxBerLevel1 (12), rxBerLevel2 (13), rxBerLevel3 (15) } | current | Predefined levels for signal degraded alarm rxBerLevel1 = 1E-12 rxBerLevel2 = 1E-13 rxBerLevel3 = 1E-15 OSNRMargin1 = 0.5 dB margin with respect to FEC cliff OSNRMargin1 = 1.0 dB margin with respect to FEC cliff |
| BoardOrInterfaceAdminStatus | INTEGER { down (1), service (2), up (3) } | current | The administrative state for a board or interface. down - The board/interface should be inactive. service - The board/interface is activated but alarms are suppressed. Intended for use during service or re-configuration… |
| BoardOrInterfaceOperStatus | INTEGER { notPresent (1), down (2), up (3) } | current | The operational state for a board or interface. notPresent - The board/interface is not available. down - The board/interface is de-activated or there are faults preventing it from going to the 'up'-state. up - The boar… |
| CcType | INTEGER { addDrop (0), broadcast (1), select (2), notApplicable (2147483647) } | current | Tells which type of CC that is set up. addDrop?. broadcast?. select?. notApplicable (2147483647) is used when attribute is not used in current configuration. |
| CommandString | OCTET STRING | current | tbd |
| ConnectorType | INTEGER { connector4x10Gb (1), connector1x100Gb (2), notApplicable (2147483647) } | current | Connector type specifies the mode in which a port containing sub ports (henceforth referred to as a main port) shall operate in. An example is the QSFP+/28 interface which can use break-out QSFP optics in the same physi… |
| DispersionSearchLimit | INTEGER { medium (22500), high (30000) } | current | Dispersion Search Limit. - Medium - High |
| DisplayStringWithNA | OCTET STRING (SIZE (0..255)) | current | Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - th… |
| EnabledDisabledWithNA | INTEGER { disabled (1), enabled (2), notApplicable (2147483647) } | current | disabled - Attribute is not set. enabled - Attribute is set. notApplicable (2147483647) is used when attribute is not used in current configuration. |
| EnableDisable | INTEGER { disabled (1), enabled (2) } | current | Represents a boolean value. |
| FaultStatus | INTEGER { ok(1), alarm(2) } | current | A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. alarm - indi… |
| FaultStatusWithNA | INTEGER { ok(1), alarm(2), notApplicable (2147483647) } | current | A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. alarm - indi… |
| FecType | INTEGER { disabled (0), g709 (1), g9751I4 (2), g9751I7 (3), sdFec (4), notApplicable (2147483647) } | current | Defines the FEC type of the signal. disabled - FEC correction is not activated. g709 - 1st generation FEC according to ITU-T G.709 (near 6 dB coding gain). g9751I4 - FEC according to G975.1 I.4. Outer code: RS(1023,1007… |
| FlowControlMode | INTEGER { noPause (1), rxPause (2), txPause (3), bothPause (4), notApplicable (2147483647) } | current | The mode for handling flow control between the local device and link partner. The PAUSE settings has the following meaning when auto-negotiation is enabled. Setting 802.3 equivalent noPause No PAUSE. txPause Asymmetric … |
| Frequency | INTEGER { undefined (0), b1300 (130), b1500 (150), w850 (850), w1270 (1270), w1290 (1290), w1310 (1310), w1330 (1330), w1350 (1350), w1370 (1370), w1390 (1390), w1410 (1410), w1430 (1430), w1450 (1450), w1470 (1470), w1490 (1490), w1510 (1510), w1530 (1530), w1550 (1550), w1570 (1570), w1590 (1590), w1610 (1610), ch871 (18710), ch873 (18730), ch875 (18750), ch877 (18770), ch879 (18790), ch881 (18810), ch883 (18830), ch885 (18850), ch887 (18870), ch889 (18890), ch891 (18910), ch893 (18930), ch895 (18950), ch897 (18970), ch899 (18990), ch901 (19010), ch903 (19030), ch905 (19050), ch907 (19070), ch909 (19090), ch9135 (19135), ch914 (19140), ch9145 (19145), ch915 (19150), ch9155 (19155), ch916 (19160), ch9165 (19165), ch917 (19170), ch9175 (19175), ch918 (19180), ch9185 (19185), ch919 (19190), ch9195 (19195), ch920 (19200), ch9205 (19205), ch921 (19210), ch9215 (19215), ch922 (19220), ch9225 (19225), ch923 (19230), ch9235 (19235), ch924 (19240), ch9245 (19245), ch925 (19250), ch9255 (19255), ch926 (19260), ch9265 (19265), ch927 (19270), ch9275 (19275), ch928 (19280), ch9285 (19285), ch929 (19290), ch9295 (19295), ch930 (19300), ch9305 (19305), ch931 (19310), ch9315 (19315), ch932 (19320), ch9325 (19325), ch933 (19330), ch9335 (19335), ch934 (19340), ch9345 (19345), ch935 (19350), ch9355 (19355), ch936 (19360), ch9365 (19365), ch937 (19370), ch9375 (19375), ch938 (19380), ch9385 (19385), ch939 (19390), ch9395 (19395), ch940 (19400), ch9405 (19405), ch941 (19410), ch9415 (19415), ch942 (19420), ch9425 (19425), ch943 (19430), ch9435 (19435), ch944 (19440), ch9445 (19445), ch945 (19450), ch9455 (19455), ch946 (19460), ch9465 (19465), ch947 (19470), ch9475 (19475), ch948 (19480), ch9485 (19485), ch949 (19490), ch9495 (19495), ch950 (19500), ch9505 (19505), ch951 (19510), ch9515 (19515), ch952 (19520), ch9525 (19525), ch953 (19530), ch9535 (19535), ch954 (19540), ch9545 (19545), ch955 (19550), ch9555 (19555), ch956 (19560), ch9565 (19565), ch957 (19570), ch9575 (19575), ch958 (19580), ch9585 (19585), ch959 (19590), ch9595 (19595), ch960 (19600), ch9605 (19605), ch961 (19610), notAvailable (2147483646), notApplicable (2147483647) } | current | The frequency of the 'wavelength' given in hundreds of GHz (0.01 GHz). notApplicable - used to tell that attribute is not used in current configuration. notAvailable - used to tell that it is not possible to read attrib… |
| FrequencyOnlyNotApplicable | INTEGER { undefined (0), b1300 (130), b1500 (150), w850 (850), w1270 (1270), w1290 (1290), w1310 (1310), w1330 (1330), w1350 (1350), w1370 (1370), w1390 (1390), w1410 (1410), w1430 (1430), w1450 (1450), w1470 (1470), w1490 (1490), w1510 (1510), w1530 (1530), w1550 (1550), w1570 (1570), w1590 (1590), w1610 (1610), ch871 (18710), ch873 (18730), ch875 (18750), ch877 (18770), ch879 (18790), ch881 (18810), ch883 (18830), ch885 (18850), ch887 (18870), ch889 (18890), ch891 (18910), ch893 (18930), ch895 (18950), ch897 (18970), ch899 (18990), ch901 (19010), ch903 (19030), ch905 (19050), ch907 (19070), ch909 (19090), ch9135 (19135), ch914 (19140), ch9145 (19145), ch915 (19150), ch9155 (19155), ch916 (19160), ch9165 (19165), ch917 (19170), ch9175 (19175), ch918 (19180), ch9185 (19185), ch919 (19190), ch9195 (19195), ch920 (19200), ch9205 (19205), ch921 (19210), ch9215 (19215), ch922 (19220), ch9225 (19225), ch923 (19230), ch9235 (19235), ch924 (19240), ch9245 (19245), ch925 (19250), ch9255 (19255), ch926 (19260), ch9265 (19265), ch927 (19270), ch9275 (19275), ch928 (19280), ch9285 (19285), ch929 (19290), ch9295 (19295), ch930 (19300), ch9305 (19305), ch931 (19310), ch9315 (19315), ch932 (19320), ch9325 (19325), ch933 (19330), ch9335 (19335), ch934 (19340), ch9345 (19345), ch935 (19350), ch9355 (19355), ch936 (19360), ch9365 (19365), ch937 (19370), ch9375 (19375), ch938 (19380), ch9385 (19385), ch939 (19390), ch9395 (19395), ch940 (19400), ch9405 (19405), ch941 (19410), ch9415 (19415), ch942 (19420), ch9425 (19425), ch943 (19430), ch9435 (19435), ch944 (19440), ch9445 (19445), ch945 (19450), ch9455 (19455), ch946 (19460), ch9465 (19465), ch947 (19470), ch9475 (19475), ch948 (19480), ch9485 (19485), ch949 (19490), ch9495 (19495), ch950 (19500), ch9505 (19505), ch951 (19510), ch9515 (19515), ch952 (19520), ch9525 (19525), ch953 (19530), ch9535 (19535), ch954 (19540), ch9545 (19545), ch955 (19550), ch9555 (19555), ch956 (19560), ch9565 (19565), ch957 (19570), ch9575 (19575), ch958 (19580), ch9585 (19585), ch959 (19590), ch9595 (19595), ch960 (19600), ch9605 (19605), ch961 (19610), notApplicable (2147483647) } | current | The frequency of the 'wavelength' given in hundreds of GHz (0.01 GHz). notApplicable - used to tell that attribute is not used in current configuration. |
| Integer32WithNA | Integer32 (0..2147483645 | 2147483646 | 2147483647) | current | An Integer32 of an object between 0 and 2147483645. 2147483647 is used to indicate that the attribute is not used on the object. 2147483646 is used to indicate that the attribute is not available currently |
| InterfaceStatus | INTEGER { outOfService (1), autoInService (2), inService (3), maintenance (4), notApplicable (2147483647) } | current | The traffic port status calculated dynamically from auto alarm enbale status and admin status. outOfService - No PM and no alarms. autoInService - No PM and no alarms. Changes to 'inService' when OK. inService - Reports… |
| InterfaceType | INTEGER { individual (1), bundled (2), bundledSplit (3), notAvailable (2147483646), notApplicable (2147483647) } | current | Indicates the type of interface. individual - The ports of the interface are handled individually bundled - The ports of the interface are bundled bundledSplit - The ports of the interface are bundled 2x5 |
| LambdaFrequency | INTEGER { undefined (0), iWdmPonFrequency (1), otclg (2), b1300 (130), b1500 (150), w850 (850), w1270 (1270), w1290 (1290), w1310 (1310), w1330 (1330), w1350 (1350), w1370 (1370), w1390 (1390), w1410 (1410), w1430 (1430), w1450 (1450), w1470 (1470), w1490 (1490), w1510 (1510), w1530 (1530), w1550 (1550), w1570 (1570), w1590 (1590), w1610 (1610), ch871 (18710), ch873 (18730), ch875 (18750), ch877 (18770), ch879 (18790), ch881 (18810), ch883 (18830), ch885 (18850), ch887 (18870), ch889 (18890), ch891 (18910), ch893 (18930), ch895 (18950), ch897 (18970), ch899 (18990), ch901 (19010), ch903 (19030), ch905 (19050), ch907 (19070), ch909 (19090), ch9135 (19135), ch914 (19140), ch9145 (19145), ch915 (19150), ch9155 (19155), ch916 (19160), ch9165 (19165), ch917 (19170), ch9175 (19175), ch918 (19180), ch9185 (19185), ch919 (19190), ch9195 (19195), ch920 (19200), ch9205 (19205), ch921 (19210), ch9215 (19215), ch922 (19220), ch9225 (19225), ch923 (19230), ch9235 (19235), ch924 (19240), ch9245 (19245), ch925 (19250), ch9255 (19255), ch926 (19260), ch9265 (19265), ch927 (19270), ch9275 (19275), ch928 (19280), ch9285 (19285), ch929 (19290), ch9295 (19295), ch930 (19300), ch9305 (19305), ch931 (19310), ch9315 (19315), ch932 (19320), ch9325 (19325), ch933 (19330), ch9335 (19335), ch934 (19340), ch9345 (19345), ch935 (19350), ch9355 (19355), ch936 (19360), ch9365 (19365), ch937 (19370), ch9375 (19375), ch938 (19380), ch9385 (19385), ch939 (19390), ch9395 (19395), ch940 (19400), ch9405 (19405), ch941 (19410), ch9415 (19415), ch942 (19420), ch9425 (19425), ch943 (19430), ch9435 (19435), ch944 (19440), ch9445 (19445), ch945 (19450), ch9455 (19455), ch946 (19460), ch9465 (19465), ch947 (19470), ch9475 (19475), ch948 (19480), ch9485 (19485), ch949 (19490), ch9495 (19495), ch950 (19500), ch9505 (19505), ch951 (19510), ch9515 (19515), ch952 (19520), ch9525 (19525), ch953 (19530), ch9535 (19535), ch954 (19540), ch9545 (19545), ch955 (19550), ch9555 (19555), ch956 (19560), ch9565 (19565), ch957 (19570), ch9575 (19575), ch958 (19580), ch9585 (19585), ch959 (19590), ch9595 (19595), ch960 (19600), ch9605 (19605), ch961 (19610) } | current | The frequency of the 'wavelength' given in hundreds of GHz (0.01 GHz). |
| LambdaType | INTEGER { fixed (1), range (2) , transparent (3), interleavedOdd (4), interleavedEven (5), interleaved50GHzOdd (6), interleaved50GhzEven (7) } | current | Indicates the type of wavelength a port can accomodate. fixed - The port received or transmits a fixed frequency. range - The port can handle a range of frequencies. transparent - There are no frequency properties assoc… |
| LaneFrequency | INTEGER { undefined (0), b1300 (130), b1500 (150), w850 (850), w1270 (1270), w1290 (1290), w1297 (1297), w1301 (1301), w1305 (1305), w1309 (1309), w1310 (1310), w1330 (1330), w1350 (1350), w1370 (1370), w1390 (1390), w1410 (1410), w1430 (1430), w1450 (1450), w1470 (1470), w1490 (1490), w1510 (1510), w1523 (1523), w1530 (1530), w1531 (1531), w1539 (1539), w1547 (1547), w1550 (1550), w1555 (1555), w1563 (1563), w1570 (1570), w1571 (1571), w1579 (1579), w1587 (1587), w1590 (1590), w1595 (1595), w1610 (1610), ch871 (18710), ch873 (18730), ch875 (18750), ch877 (18770), ch879 (18790), ch881 (18810), ch883 (18830), ch885 (18850), ch887 (18870), ch889 (18890), ch891 (18910), ch893 (18930), ch895 (18950), ch897 (18970), ch899 (18990), ch901 (19010), ch903 (19030), ch905 (19050), ch907 (19070), ch909 (19090), ch9185 (19185), ch919 (19190), ch9195 (19195), ch920 (19200), ch9205 (19205), ch921 (19210), ch9215 (19215), ch922 (19220), ch9225 (19225), ch923 (19230), ch9235 (19235), ch924 (19240), ch9245 (19245), ch925 (19250), ch9255 (19255), ch926 (19260), ch9265 (19265), ch927 (19270), ch9275 (19275), ch928 (19280), ch9285 (19285), ch929 (19290), ch9295 (19295), ch930 (19300), ch9305 (19305), ch931 (19310), ch9315 (19315), ch932 (19320), ch9325 (19325), ch933 (19330), ch9335 (19335), ch934 (19340), ch9345 (19345), ch935 (19350), ch9355 (19355), ch936 (19360), ch9365 (19365), ch937 (19370), ch9375 (19375), ch938 (19380), ch9385 (19385), ch939 (19390), ch9395 (19395), ch940 (19400), ch9405 (19405), ch941 (19410), ch9415 (19415), ch942 (19420), ch9425 (19425), ch943 (19430), ch9435 (19435), ch944 (19440), ch9445 (19445), ch945 (19450), ch9455 (19455), ch946 (19460), ch9465 (19465), ch947 (19470), ch9475 (19475), ch948 (19480), ch9485 (19485), ch949 (19490), ch9495 (19495), ch950 (19500), ch9505 (19505), ch951 (19510), ch9515 (19515), ch952 (19520), ch9525 (19525), ch953 (19530), ch9535 (19535), ch954 (19540), ch9545 (19545), ch955 (19550), ch9555 (19555), ch956 (19560), ch9565 (19565), ch957 (19570), ch9575 (19575), ch958 (19580), ch9585 (19585), ch959 (19590), ch9595 (19595), ch960 (19600), ch9605 (19605), ch961 (19610), notAvailable (2147483646), notApplicable (2147483647) } | current | The frequency of the 'wavelength' given in hundreds of GHz (0.01 GHz). notApplicable - used to tell that attribute is not used in current configuration. notAvailable - used to tell that it is not possible to read attrib… |
| LaserMode | INTEGER { forcedOn (1), als (2), notApplicable (2147483647) } | current | The configured laser mode. notApplicable - used to tell that attribute is not used in current configuration. |
| Layer | Unsigned32 (0.. 2147483646 | 2147483647) | current | Layer in signal. this is a bitmask describing layer. 2147483647 is used to indicate that the attribute is not used on the object. |
| MgmtNameString | OCTET STRING (SIZE (0..255)) | current | An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB. |
| MgmtNameStringWithNA | OCTET STRING (SIZE (0..255)) | current | An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB. The value _notApplicable_ is used to tell the SNMP client that this … |
| MplsLabel | Unsigned32 (0..1048575) | current | MPLS label with actual label range 16-1048575, 0-15 is reserved. |
| ObjectProperty | Unsigned32 (0..4294967295) | current | A bitmask of length 32 encoding certain properties of an object. |
| OnOff | INTEGER { off (1), on (2), notAvailable (2147483646), notApplicable (2147483647) } | current | The configured laser mode. notApplicable - used to tell that attribute is not used in current configuration. notAvailable - used to tell that it is not possible to read attribute at the moment. |
| OperStatusWithNA | INTEGER { notPresent (1), down (2), up (3), notApplicable (2147483647) } | current | The operational state for a interface. notPresent - The interface is not available. down - The interface is de-activated or there are faults preventing it from going to the 'up'-state. up - The interface is active. notA… |
| OpticalLayerMappingType | INTEGER { undefined (0), fourOpticalLanes (1), tenOpticalLanes (2), singleOpticalChannel (3) } | current | Type of optical layer mapping. |
| OtnAlarmMode | INTEGER { ignore (0), alarm (1), display (2), notApplicable (2147483647) } | current | Tells how section specific alarms are handled. ignore - Do not show any alarms on non-terminated sections. display - Show fault status on non-terminated sections. alarm - Alarm also for non-terminating sections. notAppl… |
| OtnDirectionWithNA | INTEGER { none (0), rx (1), tx (2), notApplicable (2147483647) } | current | Indicates the direction applied to the monitoring object the trace is related to. None - Unspecified direction. Rx - In bound direction. Tx - out bound direction. notApplicable (2147483647) is used when attribute is not… |
| OtnMonitorConfig | INTEGER { terminated (0), transparent (1) } | current | Monitor Configuration for an OTN object. terminated - section is terminated in port transparent - monitor passes the port transparent |
| OtnMonitorType | INTEGER { sm (0), pm (1), tcm (2) } | current | MonitorType for an OTN object. sm - section monitor pm - path monitor tcm - tandem connection monitor |
| OtnTIMDetMode | INTEGER { sapi (0), dapi (1), both (2) } | current | TTI Mismatch detection mode. sapi - TTI MM is detected based on SAPI dapi - TTI MM is detected based on DAPI both - TTI MM is detected based on SAPI and DAPI |
| OtnTIMDetModeWithNA | INTEGER { off (0), sapi (1), dapi (2), both (3), notApplicable (2147483647) } | current | TTI Mismatch detection mode. off - TTI MM is not monitored on any level sapi - TTI MM is detected based on SAPI dapi - TTI MM is detected based on DAPI both - TTI MM is detected based on SAPI and DAPI notApplicable (214… |
| OtnType | INTEGER { sm (0), tcm (1), pm (2) } | current | Type of overhead. sm - Section monitoring (SM). tcm - Tandem connection monitoring (TCM) pm - Path monitoring (PM) |
| OtnTypeWithNA | INTEGER { sm (0), pm (1), tcm1 (2), tcm2 (3), tcm3 (4), tcm4 (5), tcm5 (6), tcm6 (7), notAvailable (2147483646), notApplicable (2147483647) } | current | Type of overhead. sm - Section monitoring (SM). tcm - Tandem connection monitoring (TCM) pm - Path monitoring (PM) |
| PhysicalLayerMappingType | INTEGER { dualFiber (1), singleFiber (2) } | current | Type of physical layer mapping. |
| Platform | INTEGER { unknown (0), cuosc (1), cusfpv1 (2), cusfpv2 (3), cusfpv3 (4), culessTU1 (5), culessTU2 (6), culessTU3 (7), culessTU4 (8), pizzaboxFHA1UDC (9), pizzaboxEMXP1UDC (10), pizzaboxHDEA1600 (11) } | current | shows which platform type (CU type) the node is |
| PmReset | INTEGER { normal (1), reset (2) } | current | 'Action' for reseting performance counters. |
| PortNumber | Unsigned32 (0..116) | current | The number of a port on a board. If an interface has two numbers, the lowest number is used. 0 signifies an undefined port number. |
| PortType | INTEGER { rx (1), tx (2), biDi (3) } | current | tbd description tbd rxTx? |
| Rate | INTEGER { sdh156 (1), sdh2488 (2), notAvailable (2147483646), notApplicable (2147483647) } | current | The bit rate of signal. notApplicable - used to tell that attribute is not used in current configuration. notAvailable - used to tell that it is not possible to read attribute at the moment. |
| ResetWithNA | INTEGER { reset (1), normal (2), notApplicable (2147483647) } | current | When the attribute is set to reset the function is re-initialised. Then the attribute is set to normal again automatically. reset - Re-initialises the function normal - The function is in normal state notApplicable - us… |
| RsFecMode | INTEGER { forcedOff (0), forcedOn (1), auto (2) } | current | RS-FEC configuration modes |
| RsFecOnOff | INTEGER { off (0), on (1), undefined (2) } | current | Ethernet RS-FEC enabled/disabled. off - RS-FEC is disabled for inserted transceiver type. on - RS-FEC is enabled for inserted transceiver type. undefined - RS-FEC not configured, no transceiver is detected. |
| ServiceIdWithNotUsed | Integer32 (-1 | 0..2147483647) | current | An Integer32 of between -1 and 2147483647. -1 is used to indicate that the service Id is not used on this certain object.. |
| SignalDirection | INTEGER { rx (1), tx (2), biDir (3), txRx (4), notAvailable (2147483646) } | current | Indicates the direction of the signal. rx - Inbound direction tx - Outbound direction biDir - Bidirectional txRx - Both Tx and Rx |
| SignalFormat | INTEGER { other (1), stm1 (2), stm4 (3), stm16 (4), gbE (5), stm64 (6), fc1Gb (7), fc2Gb (8), wan10GbE (9), unused (10), lan10GbE (11), escon (12), esconLL (13), dvb270 (14), oc3 (15), oc12 (16), oc48 (17), oc192 (18), hdtv1485 (19), ethernet (20), fastEthernet (21), lan10GbEFec (22), wan10GbEStm64Fec (23), fc4Gb (24), etr (25), auto (26), down (27), stm1Oc3 (28), stm4Oc12 (29), stm16Oc48 (30), stm64Oc192 (31), gbe9Line (32), ddgbeLine (34), gbEorTrm5500 (35), fc8Gb (36), otu2 (37), otu2e (38), e1 (39), t1 (40), mbh2Gb5 (41), syncE (42), line4G (43), mbh4Gbps (44), fecLan10GbE1A (45), fecLan10GbE1B (46), sdi3G (47), iWdm4G (48), sdSdi270 (49), hdtvNTSC (50), oc768 (51), stm256 (52), lan40GbE (53), wan40GbE (54), sfStm256Oc768 (55), iwdm40Gb (56), otu4 (57), lan100GbE (58), transpLan10GbE (59), cpri1 (60), cpri2 (61), cpri3 (62), cpri4 (63), cpri5 (64), cpri6 (65), cpri7 (66), fc10Gb (67), fc16Gb (68), cpri8 (69), obsai1x (70), obsai2x (71), obsai4x (72), obsai8x (73), otu1 (74), iwdm11G (75), rw100G (76), rw200G (77), otu4SdFec (78), otuj1 (79), otuj2 (80), notApplicable (2147483647) } | current | Signal format for an interfaces. other - Unspecified format (see bitrate configuration for speed) stm1 - STM-1 SDH signal stm4 - STM-4 SDH signal stm16 - STM-16 SDH signal stm64 - STM-64 SDH signal stm256 - STM-256 SDH … |
| SignalStatusWithNA | INTEGER { down (1), degraded (2), up (3), notApplicable (2147483647) } | current | SignalStatus. notApplicable - used to tell that attribute is not used in current configuration. |
| SignalStructure | INTEGER { phyTrxOptOtsOptOchOtnOtuOtnOduOtnmonSmOtnmonPm (1), phyTrxOptOtsOptOchSdhRsSdhMs (2), phyTrxOptOtsOptOchSonetSectionSonetLine (3), phyTrxOptOtsOptOchEthPhys (4), notApplicable (2147483647) } | deprecated | Describes which layers in the MTOSI MIB the port currently uses. notApplicable - used to tell that attribute is not used in current configuration. |
| SignalType | INTEGER { uni (1), biDi (2) } | current | tbd description |
| Signed32WithNA | Integer32 (-2147483648.. 2147483645 | 2147483646 | 2147483647) | current | A signed integer. 2147483646 used to tell that it is not possible to read attribute at the moment. 2147483647 is used to indicate that the attri- bute is not available currently |
| SlotNumber | Unsigned32 (0..22) | current | The number of a slot within a subrack. 0 signifies an undefined slot number. |
| StsSpeType | INTEGER { sts192cSpe (0), sts48cSpe (1), sts12cSpe (2), sts3cSpe (3), sts1Spe (4) } | current | Type of STS-SPE. |
| StsType | INTEGER { stsType192c (0), stsType48c (1), stsType3c (2), sts3 (3), sts1 (4) } | current | Type of STS. |
| SubrackNumber | Unsigned32 (0..15) | current | The number of a subrack within a network element. 0 signifies an undefined subrack number. |
| SyncSourceMode | INTEGER { disabled (0), enabled (1), lockedOut (2) } | current | Operating mode of a synchronization source. disabled - The source is disabled from the sync selection process and will not send or terminate SSM messages. Any incoming SSM messages will be passed on transparently. enabl… |
| SyncSourceState | INTEGER { undefined (0), normal (1), failed (2), waitToRestore(3) } | current | State of synchronization source included in a synchronization selection process as per defined in ITU-T G.781. |
| TcmMode | INTEGER { operational (0), transparent (1), monitor (2), notApplicable (2147483647) } | current | TCM mode for a TCM object according to G.798. operationl - The TCM section is terminated. transparent - The TCM section is transparent. monitor - Some consequent actions will occur due to other alarms. See G.798. notApp… |
| TcmNumber | INTEGER { tcm1 (0), tcm2 (1), tcm3 (2), tcm4 (3), tcm5 (4), tcm6 (5), notApplicable (2147483647) } | current | TCM number in ODU overhead that is terminated. Can be tcm1 .. tcm6. notApplicable (2147483647) is used when attribute is not used in current configuration. |
| Time7200min | Integer32 (0..7200 | 2147483647) | current | An Integer32 of an object between 0 and 7200. The value 0 is used in SNMP to indicate that the setting will last forever. 2147483647 is used to indicate that the attribute is not used on the object. |
| Time7200minNo0 | Integer32 (1..7200 | 2147483647) | current | An Integer32 of an object between 1 and 7200. The value 2147483647 is used to indicate that the attribute is not used on the object. |
| TribPortIdType | INTEGER { unused (0), tp1 (1), tp2 (2), tp3 (3), tp4 (4), tp5 (5), tp6 (6), tp7 (7), tp8 (8), tp9 (9), tp10 (10), tp11 (11), notApplicable (2147483647) } | current | Tributary port ID. |
| TruthValueWithNA | INTEGER { true (0), false (1), notAvailable (2147483646), notApplicable (2147483647) } | current | Defines a value that can be true, false or not available true - The condition is false false - The condition is not true notAvailable (2147483646) is used when attribute is not available under current circumstances. Thi… |
| TrxMedia | INTEGER { undefined (0), optical(1), tp1000BaseT(2), tp100BaseT(3), tp10BaseT(4), electrical(5) } | current | Defines the media and capability of the TRX optical - Optical media tp1000BaseT - Twisted-pair capable of 1000BaseT tp100BaseT - Twisted-pair capable of 100BaseT tp10BaseT - Twisted-pair capable of 10BaseT electrical - … |
| TrxMediaWithNA | INTEGER { undefined (0), optical(1), tp1000BaseT(2), tp100BaseT(3), tp10BaseT(4), electrical(5), notAvailable (2147483646), notApplicable (2147483647) } | current | Defines the media and capability of the TRX optical - Optical media tp1000BaseT - Twisted-pair capable of 1000BaseT tp100BaseT - Twisted-pair capable of 100BaseT tp10BaseT - Twisted-pair capable of 10BaseT electrical - … |
| TrxRxState | INTEGER { missing (0), initStarted (1), initReady (2), frequencyReady (3), inputSignalReceived (4), adConverterReady (5), dispersionCompensated (6), ready (7), notApplicable (2147483647) } | current | TRX RX start-up sequence state. - Init started - Init ready - Frequency ready - Input signal received - A/D Converter ready - Dispersion compensated - Ready |
| TrxTxState | INTEGER { missing (0), initStarted (1), initReady (2), dataPathLocked (3), laserReadyOff (4), laserReady (5), laserBiasReady (6), ready (7), notApplicable (2147483647) } | current | TRX TX start-up sequence state. - Init started - Init ready - Data path locked - Laser ready off - Laser ready - Laser bias ready - Ready |
| Unsigned32WithNA | Unsigned32 (0..4294967292 | 4294967293 | 4294967294) | current | An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object |
| VcType | INTEGER { vc4Type64c (0), vc4Type16c (1), vc4Type4c (2), vc4 (3), vc3 (4) } | current | Type of virtual container (VC). |