MEMOTECADMIN-MIB
29 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.3.1 | ScalarmemotecAdminCommunity | write-only | mandatory | Determines the super-user community name (password) that has full Read/Write access to all MIB objects within the system. You must enter this community name wh… |
| 1.3.6.1.4.1.495.3.2 | ScalarmemotecAdminViewInacTimer | read-write | mandatory | THE CX900 DOES NOT SUPPORT THIS OBJECT. Determines the length of time, in minutes, that an SNMP session can remain inactive before the system logs out the user… |
| 1.3.6.1.4.1.495.3.3 | ScalarmemotecAdminAgentInterfaceAlias | read-write | mandatory | THE CX900 DOES NOT SUPPORT THIS OBJECT. Determines the textual name the network administrator assigns to the SNMP Agent. The setting of this object is dynamic.… |
| 1.3.6.1.4.1.495.3.4 | ScalarmemotecAdminStatisticsHeartBeat | read-write | mandatory | THE CX900 DOES NOT SUPPORT THIS OBJECT. Determines the length of time, in seconds, after which the system refreshes its SNMP statistics for each module. The se… |
| 1.3.6.1.4.1.495.3.5 | ScalarmemotecAdminCardAliveHeartBeat | read-write | mandatory | THE CX900 DOES NOT SUPPORT THIS OBJECT. Determines the length of time, in seconds, after which the system checks too see if each module is alive. The setting o… |
| 1.3.6.1.4.1.495.3.6 | NodememotecAdminSecurity | |||
| 1.3.6.1.4.1.495.3.6.1 | TablememotecCommunityTable | not-accessible | mandatory | The community table. |
| 1.3.6.1.4.1.495.3.6.1.1 | RowmemotecCommunityEntry | not-accessible | mandatory | Information about a community table entry. |
| 1.3.6.1.4.1.495.3.6.1.1.1 | ColumnmemotecCommunityIndex | read-only | mandatory | Displays the index number of the community name. The software assigns this number automatically to uniquely identify the communicty name. The index acts as a p… |
| 1.3.6.1.4.1.495.3.6.1.1.2 | ColumnmemotecCommunityName | read-write | mandatory | Determines the community name (password) the system acceptes for all SNMP requests. Note: When defining the community name, you must enter the super-user commu… |
| 1.3.6.1.4.1.495.3.6.1.1.3 | ColumnmemotecCommunityNetAddress | read-write | mandatory | Associates an IP address with a community name. The object memotecCommunityName (of this table) identifies the community name this object applies to. The syste… |
| 1.3.6.1.4.1.495.3.6.1.1.4 | ColumnmemotecCommunityAccess | read-write | mandatory | Determines the privileges of the community name when accessing the MIB objects. The object memotecCommunityName (of this table) identifies the community name t… |
| 1.3.6.1.4.1.495.3.6.1.1.5 | ColumnmemotecCommunitySecurityLevel | read-write | mandatory | THE CX900 DOES NOT SUPPORT THIS OBJECT. Determines the memotecSecurityLevelIndex defined in the Security Level Group. Currently it is set to 1 and cannot be ch… |
| 1.3.6.1.4.1.495.3.6.1.1.6 | ColumnmemotecCommunityRowStatus | read-write | mandatory | Determines the status of objects in a table row. The setting of this object is dynamic. When set to 'valid', the system immediately implements the configuratio… |
| 1.3.6.1.4.1.495.3.6.2 | TablememotecSecurityTable | not-accessible | mandatory | The security level and group within privilege association table. Currently this table is NOT accessible. |
| 1.3.6.1.4.1.495.3.6.2.1 | RowmemotecSecurityEntry | not-accessible | mandatory | Information about a security entry. |
| 1.3.6.1.4.1.495.3.6.2.1.1 | ColumnmemotecSecurityLevelIndex | read-only | mandatory | THE CX900 DOES NOT SUPPORT THIS OBJECT. Displays the index number of the community name's security level.The software automatically assigns this number to uniq… |
| 1.3.6.1.4.1.495.3.6.2.1.2 | ColumnmemotecSecurityViewIndex | read-only | mandatory | THE CX900 DOES NOT SUPPORT THIS OBJECT. Displays the index number of the memotecSecurityLevelIndex MIB object group. The software assigns this number automatic… |
| 1.3.6.1.4.1.495.3.6.2.1.3 | ColumnmemotecSecurityView | read-write | mandatory | THE CX900 DOES NOT SUPPORT THIS OBJECT. An MIB object group defined for this view index of the security level. Range of Values: none Default Value: none |
| 1.3.6.1.4.1.495.3.6.2.1.5 | ColumnmemotecSecurityRowStatus | read-write | mandatory | Determines the status of the objects in a table row. The setting of this object is dynamic. When set to 'valid', the system immediately implements the configur… |
| 1.3.6.1.4.1.495.3.6.3 | TablememotecTrapTable | not-accessible | mandatory | This is a trap table. It contains a list of IP addresses of SNMP consoles to which SNMP traps are sent. |
| 1.3.6.1.4.1.495.3.6.3.1 | RowmemotecTrapEntry | not-accessible | mandatory | An entry of the trap table. |
| 1.3.6.1.4.1.495.3.6.3.1.1 | ColumnmemotecTrapIndex | read-only | mandatory | Displays the index number of the trap entry. The software assigns this number automatically to uniquely identify the trap entry. The index acts as a pointer to… |
| 1.3.6.1.4.1.495.3.6.3.1.2 | ColumnmemotecTrapNetAddress | read-write | mandatory | Determines the network address (i.e. IP address) of the system to which traps are sent. The setting of the object is dynamic. Traps are immediately sent to the… |
| 1.3.6.1.4.1.495.3.6.3.1.3 | ColumnmemotecTrapCommunity | read-write | mandatory | Determines the community name included in all traps. The object memotecTrapNetAddress (of this table) identifies the IP address to which these traps are sent. … |
| 1.3.6.1.4.1.495.3.6.3.1.4 | ColumnmemotecTrapRowStatus | read-write | mandatory | Determines the status of the objects in a table row. The setting of this object is dynamic. When set to 'valid', the system immediately implements the trap ent… |
| 1.3.6.1.4.1.495.3.7 | NodememotecAdminMibs | |||
| 1.3.6.1.4.1.495.3.7.1 | ScalarmemotecAdminMibModules | read-only | mandatory | This objects represents the presence of the various MIB modules in the CPU. Each MIB module is represented by a bit. If the bit is set, then it implies that th… |
| 1.3.6.1.4.1.495.3.8 | ScalarmemotecAdminMibLevel | read-only | mandatory | Used to determine current MIB module release supported by the agent. Object is in decimal. |