MIOX25-MIB
37 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter TimeTicks |
| RFC1213-MIB | DisplayString ifIndex transmission |
| RFC1316-MIB MISSING | InstancePointer |
| RFC1381-MIB | PositiveInteger |
| RFC1382-MIB | X121Address |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.38 | Nodemiox | |||
| 1.3.6.1.2.1.10.38.1 | NodemioxPle | |||
| 1.3.6.1.2.1.10.38.1.1 | TablemioxPleTable | not-accessible | mandatory | This table contains information relative to an interface to an X.25 Packet Level Entity (PLE). |
| 1.3.6.1.2.1.10.38.1.1.1 | RowmioxPleEntry | not-accessible | mandatory | These objects manage the encapsulation of other protocols within X.25. |
| 1.3.6.1.2.1.10.38.1.1.1.1 | ColumnmioxPleMaxCircuits | read-write | mandatory | The maximum number of X.25 circuits that can be open at one time for this interface. A value of zero indicates the interface will not allow any additional circ… |
| 1.3.6.1.2.1.10.38.1.1.1.2 | ColumnmioxPleRefusedConnections | read-only | mandatory | The number of X.25 calls from a remote systems to this system that were cleared by this system. The interface instance should identify the X.25 interface the c… |
| 1.3.6.1.2.1.10.38.1.1.1.3 | ColumnmioxPleEnAddrToX121LkupFlrs | read-only | mandatory | The number of times a translation from an Encapsulated Address to an X.121 address failed to find a corresponding X.121 address. Encapsulated addresses can be … |
| 1.3.6.1.2.1.10.38.1.1.1.4 | ColumnmioxPleLastFailedEnAddr | read-only | mandatory | The last Encapsulated address that failed to find a corresponding X.121 address and caused mioxPleEnAddrToX121LkupFlrs to be incremented. The first octet of th… |
| 1.3.6.1.2.1.10.38.1.1.1.5 | ColumnmioxPleEnAddrToX121LkupFlrTime | read-only | mandatory | The most recent value of sysUpTime when the translation from an Encapsulated Address to X.121 address failed to find a corresponding X.121 address. |
| 1.3.6.1.2.1.10.38.1.1.1.6 | ColumnmioxPleX121ToEnAddrLkupFlrs | read-only | mandatory | The number of times the translation from an X.121 address to an Encapsulated Address failed to find a corresponding Encapsulated Address. Addresses successfull… |
| 1.3.6.1.2.1.10.38.1.1.1.7 | ColumnmioxPleLastFailedX121Address | read-only | mandatory | The last X.121 address that caused mioxPleX121ToEnAddrLkupFlrs to increase. |
| 1.3.6.1.2.1.10.38.1.1.1.8 | ColumnmioxPleX121ToEnAddrLkupFlrTime | read-only | mandatory | The most recent value of sysUpTime when the translation from an X.121 address to an Encapsulated Address failed to find a corresponding Encapsulated Address. |
| 1.3.6.1.2.1.10.38.1.1.1.9 | ColumnmioxPleQbitFailures | read-only | mandatory | The number of times a connection was closed because of a Q-bit failure. |
| 1.3.6.1.2.1.10.38.1.1.1.10 | ColumnmioxPleQbitFailureRemoteAddress | read-only | mandatory | The remote address of the most recent (last) connection that was closed because of a Q-bit failure. |
| 1.3.6.1.2.1.10.38.1.1.1.11 | ColumnmioxPleQbitFailureTime | read-only | mandatory | The most recent value of sysUpTime when a connection was closed because of a Q-bit failure. This will also be the last time that mioxPleQbitFailures was increm… |
| 1.3.6.1.2.1.10.38.1.1.1.12 | ColumnmioxPleMinimumOpenTimer | read-write | mandatory | The minimum time in milliseconds this interface will keep a connection open before allowing it to be closed. A value of zero indicates no timer. |
| 1.3.6.1.2.1.10.38.1.1.1.13 | ColumnmioxPleInactivityTimer | read-write | mandatory | The amount of time time in milliseconds this interface will keep an idle connection open before closing it. A value of 2147483647 indicates no timer. |
| 1.3.6.1.2.1.10.38.1.1.1.14 | ColumnmioxPleHoldDownTimer | read-write | mandatory | The hold down timer in milliseconds. This is the minimum amount of time to wait before trying another call to a host that was previously unsuccessful. A value … |
| 1.3.6.1.2.1.10.38.1.1.1.15 | ColumnmioxPleCollisionRetryTimer | read-write | mandatory | The Collision Retry Timer in milliseconds. The time to delay between call attempts when the maximum number of circuits is exceeded in a call attempt. |
| 1.3.6.1.2.1.10.38.1.1.1.16 | ColumnmioxPleDefaultPeerId | read-write | mandatory | This identifies the instance of the index in the mioxPeerTable for the default parameters to use with this interface. The entry identified by this object may h… |
| 1.3.6.1.2.1.10.38.2 | NodemioxPeer | |||
| 1.3.6.1.2.1.10.38.2.1 | TablemioxPeerTable | not-accessible | mandatory | This table contains information about the possible peers this machine may exchange packets with. |
| 1.3.6.1.2.1.10.38.2.1.1 | RowmioxPeerEntry | not-accessible | mandatory | Per peer information. |
| 1.3.6.1.2.1.10.38.2.1.1.1 | ColumnmioxPeerIndex | read-only | mandatory | An index value that distinguished one entry from another. This index is independent of any other index. |
| 1.3.6.1.2.1.10.38.2.1.1.2 | ColumnmioxPeerStatus | read-write | mandatory | This reports the status of a peer entry. A value of valid indicates a normal entry that is in use by the agent. A value of underCreation indicates a newly crea… |
| 1.3.6.1.2.1.10.38.2.1.1.3 | ColumnmioxPeerMaxCircuits | read-write | mandatory | The maximum number of X.25 circuits allowed to this peer. |
| 1.3.6.1.2.1.10.38.2.1.1.4 | ColumnmioxPeerIfIndex | read-write | mandatory | The value of the ifIndex object for the interface to X.25 to use to call the peer. |
| 1.3.6.1.2.1.10.38.2.1.1.5 | ColumnmioxPeerConnectSeconds | read-only | mandatory | The number of seconds a call to this peer was active. This counter will be incremented by one for every second a connection to a peer was open. If two calls ar… |
| 1.3.6.1.2.1.10.38.2.1.1.6 | ColumnmioxPeerX25CallParamId | read-write | mandatory | The instance of the index object in the x25CallParmTable from RFC 1382 for the X.25 call parameters used to communicate with the remote host. The well known va… |
| 1.3.6.1.2.1.10.38.2.1.1.7 | ColumnmioxPeerEnAddr | read-write | mandatory | The Encapsulation address of the remote host mapped by this table entry. A length of zero indicates the remote IP address is unknown or unspecified for use as … |
| 1.3.6.1.2.1.10.38.2.1.1.8 | ColumnmioxPeerX121Address | read-write | mandatory | The X.25 address of the remote host mapped by this table entry. A zero length string indicates the X.25 address is unspecified for use as the PLE default. |
| 1.3.6.1.2.1.10.38.2.1.1.9 | ColumnmioxPeerX25CircuitId | read-write | mandatory | This object identifies the instance of the index for the X.25 circuit open to the peer mapped by this table entry. The well known value {0 0} indicates no conn… |
| 1.3.6.1.2.1.10.38.2.1.1.10 | ColumnmioxPeerDescr | read-write | mandatory | This object returns any identification information about the peer. An agent may supply the comment information found in the configuration file entry for this p… |
| 1.3.6.1.2.1.10.38.2.2 | TablemioxPeerEncTable | not-accessible | mandatory | This table contains the list of encapsulations used to communicate with a peer. This table has two indexes, the first identifies the peer, the second distingui… |
| 1.3.6.1.2.1.10.38.2.2.1 | RowmioxPeerEncEntry | not-accessible | mandatory | Per connection information. |
| 1.3.6.1.2.1.10.38.2.2.1.1 | ColumnmioxPeerEncIndex | read-only | mandatory | The second index in the table which distinguishes different encapsulation types. |
| 1.3.6.1.2.1.10.38.2.2.1.2 | ColumnmioxPeerEncType | read-write | mandatory | The value of the encapsulation type. For IP encapsulation this will have a value of 204 (hex CC). For SNAP encapsulated packets, this will have a value of 128 … |