MODULES-MIB
343 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.81.12 | Nodeeth | |||
| 1.3.6.1.4.1.81.12.1 | NodeethAg | |||
| 1.3.6.1.4.1.81.12.1.1 | TableethAgTable | not-accessible | mandatory | Table of attributes which define configuration characteristics for chassis SNMP agents which use Ethernet as in-band management protocol. |
| 1.3.6.1.4.1.81.12.1.1.1 | RowethAgEntry | not-accessible | mandatory | An entry in the table, containing data about a single Ethernet agent. |
| 1.3.6.1.4.1.81.12.1.1.1.1 | ColumnethAgId | read-only | mandatory | Index which identifies the Ethernet agent for which the current entry provides information. |
| 1.3.6.1.4.1.81.12.1.1.1.2 | ColumnethAgPerfBusSelection | read-write | mandatory | Attribute describing the bus attached to the performance data collection hardware on those agent hardware implementations which support configuration managemen… |
| 1.3.6.1.4.1.81.12.2 | NodeethGroup | |||
| 1.3.6.1.4.1.81.12.2.1 | TableethGroupTable | not-accessible | mandatory | Table of attributes which define configuration characteristics for Ethernet modules. |
| 1.3.6.1.4.1.81.12.2.1.1 | RowethGroupEntry | not-accessible | mandatory | An entry in the table, containing data about a single Ethernet module (group). |
| 1.3.6.1.4.1.81.12.2.1.1.1 | ColumnethGroupId | read-only | mandatory | Index which identifies the group inside the chassis for which this entry contains information. Equals the number of the slot by which the group is accessed. Th… |
| 1.3.6.1.4.1.81.12.2.1.1.2 | ColumnethGroupFIFO | read-only | mandatory | Value ON of this attribute describes an internal FIFO error sensed by the internal hardware mechanism of a repeater. |
| 1.3.6.1.4.1.81.12.2.1.1.3 | ColumnethGroup10BTPlus | read-write | mandatory | Value ON of this attribute defines activation of the 10BaseTPlus mode - a proprietary extension of the 10BaseT standard. |
| 1.3.6.1.4.1.81.12.2.1.1.4 | ColumnethGroupIntPortsRedundancy | read-write | mandatory | Value ON of this attribute defines a redundancy (backup) relationship between internal ports 1 and 2 on a module. |
| 1.3.6.1.4.1.81.12.2.1.1.5 | ColumnethGroupBackboneMode | read-write | mandatory | Value On of this attribute defines Backbone Mode of a sensor. Internal ports are enabled and the information path goes straightly from external port to interna… |
| 1.3.6.1.4.1.81.12.2.1.1.6 | ColumnethGroupFOIRLPlusMode | read-write | mandatory | Value On of this attribute defines FOIRL of a sensor. When this attribute has value ON, FOIRL Plus mode is enabled, while value OFF indicates stan- dard FOIRL … |
| 1.3.6.1.4.1.81.12.2.1.1.7 | ColumnethGroupWrongPortSelection | read-only | mandatory | A value ON of this attribute warns of incorrect selection of enabled ports on sensors which impose restrictions on this configura- tion (e.g. integrated local … |
| 1.3.6.1.4.1.81.12.2.1.1.8 | ColumnethGroupBackupBus | read-write | mandatory | Defines the common secondary bus for Ethernet modules with bus redundancy defined at port level. |
| 1.3.6.1.4.1.81.12.2.1.1.9 | ColumnethGroupSingleBusMode | read-only | mandatory | Value 'on of this attribute defines bus-star mode for cards supporting this type of configuration. |
| 1.3.6.1.4.1.81.12.2.1.1.10 | ColumnethGroupSpecificOID | read-only | mandatory | This attribute provides the OID of another group containing additional more specific information regarding this instance. |
| 1.3.6.1.4.1.81.12.2.1.1.11 | ColumnethGroup10FBPlus | read-write | mandatory | This variable enables/disables 10BaseFB plus mode. |
| 1.3.6.1.4.1.81.12.2.1.1.12 | ColumnethGroupMasterClock | read-only | mandatory | This attribute pertains to the SH-E16 chassis and defines the hub in the stack that generates the clock. |
| 1.3.6.1.4.1.81.12.2.1.1.13 | ColumnethGroupIdleTrx | read-write | mandatory | This attribute is relevant to the LE-120Q/SQ modules and when set to 'off' after port disable terminates also light propagation (for redundancy tests). |
| 1.3.6.1.4.1.81.12.2.1.1.15 | ColumnethGroupTotalFrames | read-only | mandatory | The total number of frames of valid frame length that have been received on the ports in this group and for which the FCSError and CollisionEvent signals were … |
| 1.3.6.1.4.1.81.12.2.1.1.16 | ColumnethGroupTotalOctets | read-only | mandatory | The total number of octets contained in the valid frames that have been received on the ports in this group. This counter is the summation of the values of the… |
| 1.3.6.1.4.1.81.12.2.1.1.17 | ColumnethGroupTotalErrors | read-only | mandatory | The total number of errors which have occurred on all of the ports in this group. This counter is the summation of the values of the ethPortTotalErrors counter… |
| 1.3.6.1.4.1.81.12.2.1.1.18 | ColumnethGroupBridgeMode | read-write | mandatory | This attribute defines between which buses/ports the IELB bridge is bridging. |
| 1.3.6.1.4.1.81.12.2.1.1.19 | ColumnethGroupBroadcastPkts | read-only | mandatory | The total number of good packets received that were directed to the broadcast address, through this ports group. |
| 1.3.6.1.4.1.81.12.2.1.1.20 | ColumnethGroupMulticastPkts | read-only | mandatory | The total number of good packets received that were directed to a multicast address, through this ports group. Note that this number does not include packets d… |
| 1.3.6.1.4.1.81.12.3 | NodeethPort | |||
| 1.3.6.1.4.1.81.12.3.1 | TableethPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.12.3.1.1 | RowethPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.12.3.1.1.1 | ColumnethPortGroupId | read-only | mandatory | Id of the group to which the port belongs. |
| 1.3.6.1.4.1.81.12.3.1.1.2 | ColumnethPortId | read-only | mandatory | Unique Id of the port in the ethPortTable. |
| 1.3.6.1.4.1.81.12.3.1.1.3 | ColumnethPortFunctionalStatus | read-only | mandatory | The value of this attribute reflects the functional status of synchronous ports. Note that it is not mandatory that all ports support all the enumerated states… |
| 1.3.6.1.4.1.81.12.3.1.1.4 | ColumnethPortManPart | read-write | mandatory | Setting the value of this attribute to ON activates the manual partition mechanism at the port level. Setting the value of this attribute to OFF cancels the pa… |
| 1.3.6.1.4.1.81.12.3.1.1.5 | ColumnethPortJabber | read-only | mandatory | Value ON of this attribute reflects jabber transmitted to the port by the hardware of a repeater or transceiver, as a result of collisions detected on the port… |
| 1.3.6.1.4.1.81.12.3.1.1.6 | ColumnethPortNoAUILoop | read-only | mandatory | Value ON of this attribute indicates that a No AUI Loop fault condition was detected on an AUI repeater port. Valid for LE-10C family of modu- les. |
| 1.3.6.1.4.1.81.12.3.1.1.7 | ColumnethPortMJLP | read-only | mandatory | Value ON of this attribute describes an internal MJLP (MAU Jabber Lockup Protection) error sensed by the internal hardware mechanism of a repeater. This mechan… |
| 1.3.6.1.4.1.81.12.3.1.1.8 | ColumnethPortFIFO | read-only | mandatory | Value ON of this attribute describes an internal FIFO error sensed by the internal hardware mechanism of a repeater. Valid for LE140XTF. |
| 1.3.6.1.4.1.81.12.3.1.1.9 | ColumnethPortAutoPartitionState | read-only | mandatory | The AutoPart condition indicates that the port is currently partitioned by the auto-partition protection mechanism. |
| 1.3.6.1.4.1.81.12.3.1.1.10 | ColumnethPortSQETest | read-write | mandatory | Settable attribute which allows activation of SQE test for integrated transceivers. |
| 1.3.6.1.4.1.81.12.3.1.1.11 | ColumnethPortLastSourceAddr | read-write | mandatory | Ethernet source address of the last readable frame received by this port. The value of this item may be set to 000000 (a string of 6 zeros) by a management con… |
| 1.3.6.1.4.1.81.12.3.1.1.12 | ColumnethPortUserStatus | read-only | mandatory | Attribute defining the connection of a port to a single Ethernet source or to a multi-source (segment or star). |
| 1.3.6.1.4.1.81.12.3.1.1.13 | ColumnethPortMainBusSelection | read-write | mandatory | On cards with port-level redundancy, defines the main bus for each port instance as selected by user. |
| 1.3.6.1.4.1.81.12.3.1.1.14 | ColumnethPortTraffic | read-only | mandatory | Counter for the number of bits received on this port in frames with legal length information. |
| 1.3.6.1.4.1.81.12.3.1.1.15 | ColumnethPortFramesReceivedOK | read-only | mandatory | A representation of the total number of frames of legal length that have not been corrupted in transmission. These frames can be encoded and decoded by the com… |
| 1.3.6.1.4.1.81.12.3.1.1.16 | ColumnethPortRunts | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port that meets one of the following two conditions. Only one test need be made. a) The Activi… |
| 1.3.6.1.4.1.81.12.3.1.1.17 | ColumnethPortPacketErrors | read-only | mandatory | Counter for the number of frames with errors detected on the port by the agent hardware. This generic port error comprises too long packets, CRC and alignment … |
| 1.3.6.1.4.1.81.12.3.1.1.18 | ColumnethPortSpecificOID | read-only | mandatory | This attribute provides the OID of another group containing additional more specific information regarding this instance. |
| 1.3.6.1.4.1.81.12.3.1.1.19 | ColumnethPortCollisions | read-only | mandatory | This counter is incremented by one for any CarrierEvent signal on any port for which the CollisionEvent signal on this port is also asserted. The approximate m… |
| 1.3.6.1.4.1.81.12.3.1.1.20 | ColumnethPortPartitions | read-only | mandatory | This counter is incremented by one for each time the repeater has automatically partitioned this port. The conditions that cause port partitioning are specifie… |
| 1.3.6.1.4.1.81.12.3.1.1.21 | ColumnethPortPygmys | read-only | mandatory | The number of pygmys observed on a specified port. The pygmy is a short event. This counter is incremented by one for each CarrierEvent on this port with Activ… |
| 1.3.6.1.4.1.81.12.3.1.1.22 | ColumnethPortJabberCounter | read-only | mandatory | Counter for the number of local jabbers detected on a specific port (LE-115Q). |
| 1.3.6.1.4.1.81.12.3.1.1.23 | ColumnethPortCoupling | read-only | mandatory | Indication of port's coupling method in Ethernet transceiver modules (LE-115Q). The coupling methode can be set on board, using specific jumpers. |
| 1.3.6.1.4.1.81.12.3.1.1.24 | ColumnethPortPolarity | read-only | mandatory | This item defines the polarity state of the connection to LE-240XTC and LE-280XT ports. If the wires are crossed, the value is crossed(2), otherwise ok(1). |
| 1.3.6.1.4.1.81.12.3.1.1.25 | ColumnethPortReadableFrames | read-only | mandatory | This object is the number of frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on t… |
| 1.3.6.1.4.1.81.12.3.1.1.26 | ColumnethPortReadableOctets | read-only | mandatory | This counter is the number of octets contained in valid frames that have been received on this port.It is incremented for each frame received on this port whic… |
| 1.3.6.1.4.1.81.12.3.1.1.27 | ColumnethPortFCSErrors | read-only | mandatory | This counter is incremented by one for each frame received on this port with the FCSError signal asserted and the FramingError and CollisionEvent signals deass… |
| 1.3.6.1.4.1.81.12.3.1.1.28 | ColumnethPortAlignmentErrors | read-only | mandatory | This counter is incremented by one for each frame received on this port with the FCSError and FramingError signals asserted and CollisionEvent signal deasserte… |
| 1.3.6.1.4.1.81.12.3.1.1.29 | ColumnethPortFramesTooLong | read-only | mandatory | This counter is incremented by one for each frame received on this port whose OctetCount is greater than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). The appro… |
| 1.3.6.1.4.1.81.12.3.1.1.30 | ColumnethPortLateEvents | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port in which the CollIn(X) variable transitions to the value SQE (Ref:9.6.6.2, IEEE 802.3 Std… |
| 1.3.6.1.4.1.81.12.3.1.1.31 | ColumnethPortVeryLongEvents | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port whose ActivityDuration is greater than the MAU Jabber Lockup Protection timer TW3 (Ref: 9… |
| 1.3.6.1.4.1.81.12.3.1.1.32 | ColumnethPortDataRateMismatches | read-only | mandatory | This counter is incremented by one for each frame received on this port that meets all of the following conditions: a) The CollisionEvent signal is not asserte… |
| 1.3.6.1.4.1.81.12.3.1.1.33 | ColumnethPortTotalErrors | read-only | mandatory | The total number of errors which have occurred on this port. This counter is the summation of the values of other error counters (for the same port), namely: e… |
| 1.3.6.1.4.1.81.12.3.1.1.34 | ColumnethPortSourceAddrChanges | read-only | mandatory | This counter is incremented by one for each time that the last source address of frames entering this port has changed. This may indicate whether a link is con… |
| 1.3.6.1.4.1.81.12.3.1.1.35 | ColumnethPortOperStatus | read-only | mandatory | This object indicates the port's operational status. The operational(1) status indicates that the port is enabled and working, even though it might be auto-par… |
| 1.3.6.1.4.1.81.12.3.1.1.36 | ColumnethPortBroadcastPkts | read-only | mandatory | The total number of good packets received that were directed to the broadcast address. |
| 1.3.6.1.4.1.81.12.3.1.1.37 | ColumnethPortMulticastPkts | read-only | mandatory | The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast a… |
| 1.3.6.1.4.1.81.12.4 | NodeethIntPort | |||
| 1.3.6.1.4.1.81.12.4.1 | TableethIntPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.12.4.1.1 | RowethIntPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.12.4.1.1.1 | ColumnethIntPortGroupId | read-only | mandatory | ID of the group to which the internal port belongs. |
| 1.3.6.1.4.1.81.12.4.1.1.2 | ColumnethIntPortId | read-only | mandatory | ID of the internal port in the ethIntPortTable. |
| 1.3.6.1.4.1.81.12.4.1.1.3 | ColumnethIntPortPartition | read-only | mandatory | This condition indicates that the internal port is currently partitioned from the bus by the auto-partition protection mechanism. |
| 1.3.6.1.4.1.81.12.4.1.1.4 | ColumnethIntPortJabber | read-only | deprecated | Value ON of this attribute reflects jabber being transmitted to the bus by the hardware of a repeater, as a result of collisions detected on the internal bus o… |
| 1.3.6.1.4.1.81.12.4.1.1.5 | ColumnethIntPortBackedUp | read-write | mandatory | Indicates that internal port is part of a redundancy scheme. |
| 1.3.6.1.4.1.81.12.5 | NodeethBus | |||
| 1.3.6.1.4.1.81.12.5.1 | TableethBusPerfTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.12.5.1.1 | RowethBusPerfEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.12.5.1.1.1 | ColumnethBusPerfAgId | read-only | mandatory | ID of the agent in the ethBusPerfTable. |
| 1.3.6.1.4.1.81.12.5.1.1.2 | ColumnethBusPerfId | read-only | mandatory | ID of the bus in the ethBusPerfTable. |
| 1.3.6.1.4.1.81.12.5.1.1.3 | ColumnethBusTrafficBuffer | read-only | deprecated | Record of traffic for the last second with a resolution of 100 msec. The traffic is expressed in percents of the maximum Ethernet traffic and each record conta… |
| 1.3.6.1.4.1.81.12.5.1.1.4 | ColumnethBusTrafficThresh | read-write | mandatory | Traffic threshold value. When exceeded, a trap is send to the management console. Expressed in percents of the maximum Ethernet traffic, in the range 1..20, ex… |
| 1.3.6.1.4.1.81.12.5.1.1.5 | ColumnethBusPeakTraffic | read-write | mandatory | Maximal traffic value since last reset of hub or relay. Expressed in per- cents of the maximum Ethernet traffic, in the range 1..20, expressed on log(10) scale… |
| 1.3.6.1.4.1.81.12.5.1.1.6 | ColumnethBusTotalCollisions | read-only | mandatory | Counter incremented every time the hub enters a condition caused by simultaneous transmission and detection of external activity on one or more of its ports. |
| 1.3.6.1.4.1.81.12.5.1.1.7 | ColumnethBusTotalPackets | read-only | mandatory | Counter for number of packets (good and errors) detected on the Ethernet bus. |
| 1.3.6.1.4.1.81.12.5.1.1.8 | ColumnethBusTotalErrors | read-only | mandatory | Counter for number of errors detected on the Ethernet bus. Does not take into account the collisions. |
| 1.3.6.1.4.1.81.12.5.1.1.9 | ColumnethBusTraffic | read-only | mandatory | Last traffic reading (sampling time = 100 msec). The traffic is expressed in percents of the maximum Ethernet traffic in the range 1..20, expressed on a log(10… |
| 1.3.6.1.4.1.81.12.5.1.1.10 | ColumnethBusUtilization | read-only | mandatory | Last traffic reading (sampling time = 100 msec). The traffic is expressed in percents of the maximum Ethernet traffic. |
| 1.3.6.1.4.1.81.12.5.1.1.11 | ColumnethBusPeakUtilization | read-only | mandatory | Maximal traffic value since last reset of agent. Expressed in percents of the maximum effective Ethernet traffic. |
| 1.3.6.1.4.1.81.12.5.1.1.12 | ColumnethBusThresholdStatus | read-only | mandatory | This item is a bitmap that defines the threshold status of the bus, in relation to the alarmPolicyTable. If the bus is monitored by the agent according to poli… |
| 1.3.6.1.4.1.81.12.5.2 | TableethBusClockTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.12.5.2.1 | RowethBusClockEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.12.5.2.1.1 | ColumnethBusClockBusId | read-only | mandatory | ID of the bus in the ethBusClockTable. |
| 1.3.6.1.4.1.81.12.5.2.1.2 | ColumnethBusClockId | read-only | mandatory | ID of the clock in the ethBusClockTable. |
| 1.3.6.1.4.1.81.12.5.2.1.3 | ColumnethBusClockTestResult | read-only | mandatory | Values clockFailure(2) and busFailure(3) define the faulty status for clock tests. The test is performed by LCL100 module. |
| 1.3.6.1.4.1.81.12.6 | Nodefeth | |||
| 1.3.6.1.4.1.81.12.6.1 | NodefethPort | |||
| 1.3.6.1.4.1.81.12.6.1.1 | TablefethPortTable | not-accessible | mandatory | Table of descriptive, status, performance and error information about the ports. |
| 1.3.6.1.4.1.81.12.6.1.1.1 | RowfethPortEntry | not-accessible | mandatory | An entry in the table, containing information, performance and error statistics about a single port. |
| 1.3.6.1.4.1.81.12.6.1.1.1.1 | ColumnfethPortGroupId | read-only | mandatory | Id of the group to which the port belongs. |
| 1.3.6.1.4.1.81.12.6.1.1.1.2 | ColumnfethPortId | read-only | mandatory | Unique Id of the port in the ethPortTable. |
| 1.3.6.1.4.1.81.12.6.1.1.1.3 | ColumnfethPortFunctionalStatus | read-only | mandatory | The value of this attribute reflects the functional status of LANNET 100BaseTX port. Here is the set possible states: ok(1)- fully functional port, transmittin… |
| 1.3.6.1.4.1.81.12.6.1.1.1.4 | ColumnfethPortFIFO | read-only | mandatory | Value ON of this attribute describes an internal FIFO error sensed by the internal hardware mechanism of a the port. |
| 1.3.6.1.4.1.81.12.6.1.1.1.5 | ColumnfethPortOperStatus | read-only | mandatory | This object indicates the port's operational status. The operational(1) status indicates that the port is enabled and working, even though it might be auto-par… |
| 1.3.6.1.4.1.81.12.6.1.1.1.6 | ColumnfethPortAutoPartitionState | read-only | mandatory | The AutoPart condition indicates that the port is currently partitioned by the auto-partition protection mechanism. |
| 1.3.6.1.4.1.81.12.6.1.1.1.7 | ColumnfethPortFramesReceived | read-only | mandatory | A representation of the total number of frames received by the port from the line. The number includes all frames received even those with RxError or alignment… |
| 1.3.6.1.4.1.81.12.6.1.1.1.8 | ColumnfethPortFramesTransmitted | read-only | mandatory | A representation of the total number of frames transmitted by the port to the line. The number includes all frames transmitted. |
| 1.3.6.1.4.1.81.12.6.1.1.1.9 | ColumnfethPortTotalErrors | read-only | mandatory | The total number of errors which have occurred on this port. This counter is the summation of the values of other error counters (for the same port), namely: f… |
| 1.3.6.1.4.1.81.12.6.1.1.1.10 | ColumnfethPortFramesTransmittedOK | read-only | mandatory | A representation of the total number of frames of legal length that have not been corrupted in transmission that transmitted by the port to the line. These fra… |
| 1.3.6.1.4.1.81.12.6.1.1.1.11 | ColumnfethPortCollisionFrames | read-only | mandatory | This counter is incremented by one for any CarrierEvent signal on any port for which the CollisionEvent signal on this port is also asserted. |
| 1.3.6.1.4.1.81.12.6.1.1.1.12 | ColumnfethPortAlignmentErrors | read-only | mandatory | This counter is incremented by one for each frame received on this port with the FCSError and FramingError signals asserted and CollisionEvent signal deasserte… |
| 1.3.6.1.4.1.81.12.6.1.1.1.13 | ColumnfethPortRxErrors | read-only | mandatory | The total number of received frames with error code violation or dose not terminate correctlly. |
| 1.3.6.1.4.1.81.12.6.1.1.1.14 | ColumnfethPortReadableFrames | read-only | mandatory | This object is the number of frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on t… |
| 1.3.6.1.4.1.81.12.6.1.1.1.15 | ColumnfethPortUpper32ReadableOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame re… |
| 1.3.6.1.4.1.81.12.6.1.1.1.16 | ColumnfethPortLower32ReadableOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame re… |
| 1.3.6.1.4.1.81.12.6.1.1.1.17 | ColumnfethPortFCSErrors | read-only | mandatory | This counter is incremented by one for each frame received on this port with the FCSError signal asserted and the FramingError and CollisionEvent signals deass… |
| 1.3.6.1.4.1.81.12.6.1.1.1.18 | ColumnfethPortFrameTooLongs | read-only | mandatory | This counter is incremented by one for each frame received on this port whose OctetCount is greater than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). If fethPo… |
| 1.3.6.1.4.1.81.12.6.1.1.1.19 | ColumnfethPortShortEvents | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port with ActivityDuration less than ShortEventMaxTime. ShortEventMaxTime is 84 bits (21 nibbl… |
| 1.3.6.1.4.1.81.12.6.1.1.1.20 | ColumnfethPortRunts | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port that meets one of the following two conditions. Only one test need be made. a) The Activi… |
| 1.3.6.1.4.1.81.12.6.1.1.1.21 | ColumnfethPortLateEvents | read-only | mandatory | This counter is incremented by one on entering the Collision Count Increment state of the partition state diagram (fig 27-8) while the ActivityDuration is grea… |
| 1.3.6.1.4.1.81.12.6.1.1.1.22 | ColumnfethPortVeryLongEvents | read-only | mandatory | This counter is incremented by one on entry to the Rx Jabber state of the receiver timer state diagram (fig 27-7). Other counters may be incremented as appropr… |
| 1.3.6.1.4.1.81.12.6.1.1.1.23 | ColumnfethPortDataRateMismatches | read-only | mandatory | This counter is incremented by one for each frame received on this port that meets all of the following conditions: a) the Collision Count Increment state of t… |
| 1.3.6.1.4.1.81.12.6.1.1.1.24 | ColumnfethPortAutoPartitions | read-only | mandatory | This counter is incremented by one on entry to the Partition Wait state of the partition state diagram (fig 27-8). REFERENCE Reference IEEE Draft Std 802.3u/D4… |
| 1.3.6.1.4.1.81.12.6.1.1.1.25 | ColumnfethPortSymbolErrors | read-only | mandatory | This counter is incremented by one each time when valid length packet was received at the port and there was at least one occurrence of an invalid data symbol.… |
| 1.3.6.1.4.1.81.12.6.1.1.1.26 | ColumnfethPortLastSourceAddress | read-only | deprecated | This object is the SourceAddress of the last readable frame (i.e., counted by fethPortReadableFrames) received by this port. If no frames have been received by… |
| 1.3.6.1.4.1.81.12.6.1.1.1.27 | ColumnfethPortSourceAddrChanges | read-only | mandatory | This counter is incremented by one for each time that the fethPortLastSourceAddress attribute for this port has changed. This may indicate whether a link is co… |
| 1.3.6.1.4.1.81.12.6.1.1.1.28 | ColumnfethPortMode | read-write | mandatory | The mode of the port. halfDuplex(1)- standard mode, usually for segments. fullDuplex(2)- standard mode, usually for servers. fullDuplexAndFlowControl(3)- the m… |
| 1.3.6.1.4.1.81.12.6.1.1.1.29 | ColumnfethPortLinkRedundancyMode | read-write | mandatory | This item is relevant for modules which include redundant links. This item enables/disables the Redundancy mechanism. When enabled, the Sensor will alternately… |
| 1.3.6.1.4.1.81.12.6.1.1.1.30 | ColumnfethPortLinkRedundancyStatus | read-only | mandatory | This item is relevant for ports which includes redundant links. This item indicates which of the links is active. Default value=firstLinkActive(1). |
| 1.3.6.1.4.1.81.12.6.1.1.1.31 | ColumnfethPortDormantLinkFunctionalStatus | read-only | mandatory | The value of this attribute reflects the functionality status of the dormant link, in modules such as LEB-200, which have link redundancy capability. Note that… |
| 1.3.6.1.4.1.81.12.6.1.1.1.32 | ColumnfethPortUpper32TransmittedOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been transmitted on this port. This counter is incremented by OctetCount for each frame… |
| 1.3.6.1.4.1.81.12.6.1.1.1.33 | ColumnfethPortLower32TransmittedOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been transmitted on this port.This counter is incremented by OctetCount for each frame … |
| 1.3.6.1.4.1.81.12.6.1.1.1.34 | ColumnfethPortBroadcastReceivedFrames | read-only | mandatory | This object is the number of Broadcast readable frames that have been Received on this port. |
| 1.3.6.1.4.1.81.12.6.1.1.1.35 | ColumnfethPortMulticastReceivedFrames | read-only | mandatory | This object is the number of Multicast readable (good) frames that have been Received on this port. |
| 1.3.6.1.4.1.81.12.6.1.1.1.36 | ColumnfethPortEnablePHY | read-write | mandatory | This item is relevant for ports which include redundant links (such as LEB200). This item is not valid and has no effect when the fethPortLinkRedundancyMode=en… |
| 1.3.6.1.4.1.81.12.6.2 | NodefethGroup | |||
| 1.3.6.1.4.1.81.12.6.2.1 | TablefethGroupTable | not-accessible | mandatory | Table of descriptive, status, performance and error information about the groups of fast ethernet ports. |
| 1.3.6.1.4.1.81.12.6.2.1.1 | RowfethGroupEntry | not-accessible | mandatory | An entry in the table, containing information, total performance and error statistics for a single group of ports. Regular retrieval of the information in this… |
| 1.3.6.1.4.1.81.12.6.2.1.1.1 | ColumnfethGroupId | read-only | mandatory | This object identifies the group within the repeater for which this entry contains information. This value is never greater than fethRepeaterGroupCapacity. REF… |
| 1.3.6.1.4.1.81.12.6.2.1.1.2 | ColumnfethGroupOperStatus | read-only | mandatory | An object that indicates the operational status of the group. A status of notPresent(4) indicates that the group is temporarily or permanently physically and/o… |
| 1.3.6.1.4.1.81.12.6.2.1.1.3 | ColumnfethGroupUtilization | read-only | mandatory | Utilization of the network, expressed in percentage of the maximum traffic possible ( 100Mbps) |
| 1.3.6.1.4.1.81.12.6.2.1.1.4 | ColumnfethGroupTotalFrames | read-only | mandatory | The total number of frames of valid frame length that have been received on the ports in this group and for which the FCSError and CollisionEvent signals were … |
| 1.3.6.1.4.1.81.12.6.2.1.1.5 | ColumnfethGroupUpper32TotalOctets | read-only | mandatory | The total number of octets contained in the valid frames that have been received on the ports in this group. This counter is the summation of the values of the… |
| 1.3.6.1.4.1.81.12.6.2.1.1.6 | ColumnfethGroupLower32TotalOctets | read-only | mandatory | The total number of octets contained in the valid frames that have been received on the ports in this group. This counter is the summation of the values of the… |
| 1.3.6.1.4.1.81.12.6.2.1.1.7 | ColumnfethGroupTotalErrors | read-only | mandatory | The total number of errors which have occurred on all of the ports in this group. This counter is the summation of the values of the fethPortTotalErrors counte… |
| 1.3.6.1.4.1.81.12.6.2.1.1.8 | ColumnfethGroupFefiEnable | read-write | mandatory | This item enables\disables the FEFI mechanism of the PHY on the module. It enables\disables both the transmission and the recognition of FEFI signals . This it… |
| 1.3.6.1.4.1.81.13 | Nodetok | |||
| 1.3.6.1.4.1.81.13.1 | NodetokRing | |||
| 1.3.6.1.4.1.81.13.1.1 | TabletokRingTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.13.1.1.1 | RowtokRingEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.13.1.1.1.1 | ColumntokRingAgId | read-only | mandatory | ID of the agent to which the ring belongs in the tokRingTable. |
| 1.3.6.1.4.1.81.13.1.1.1.2 | ColumntokRingId | read-only | mandatory | ID of the ring in the tokRingTable. |
| 1.3.6.1.4.1.81.13.1.1.1.3 | ColumntokRingLeftSlot | read-only | mandatory | Slot number of the left-most slot of the ring. In the token ring stackable hub, 'Left' should be read as 'Up'. |
| 1.3.6.1.4.1.81.13.1.1.1.4 | ColumntokRingRightSlot | read-write | mandatory | Slot number of the right-most slot of the ring that has a lobe port. In the token ring stackable hub, 'Right' should be read as 'Down'. |
| 1.3.6.1.4.1.81.13.1.1.1.5 | ColumntokRingTrafficBuffer | read-only | deprecated | Record of traffic for the last second with a resolution of 100 msec. The traffic is expressed in percents of the maximum effective TR traffic (token messages a… |
| 1.3.6.1.4.1.81.13.1.1.1.6 | ColumntokRingTrafficThresh | read-write | mandatory | Traffic threshold value. When exceeded, a trap is send to the management console. Expressed in percents of the maximum effective TR traffic (token messages are… |
| 1.3.6.1.4.1.81.13.1.1.1.7 | ColumntokRingPeakTraffic | read-write | mandatory | Maximal traffic value since last reset of agent. Expressed in percents of the maximum effective TR traffic (token messages are excluded), in the range 1..20 on… |
| 1.3.6.1.4.1.81.13.1.1.1.8 | ColumntokRingNumberOfStations | read-only | mandatory | Number of Token Ring stations (controllers) detected on the ring. The TR controller of the agent card is included in this count. |
| 1.3.6.1.4.1.81.13.1.1.1.9 | ColumntokRingConfiguration | read-only | mandatory | Configuration attribute describing the list of physical addresses detected on the Token Ring. Coded in internal application format. |
| 1.3.6.1.4.1.81.13.1.1.1.10 | ColumntokRingBeaconing | read-only | mandatory | This attribute indicates if a beaconing condition is currently detected on the ring. |
| 1.3.6.1.4.1.81.13.1.1.1.11 | ColumntokRingBeaconingStation | read-only | mandatory | The MAC address of the last station which was detected as sending Beaconing MAC frames on the ring. |
| 1.3.6.1.4.1.81.13.1.1.1.12 | ColumntokRingStationsMatch | read-only | mandatory | This attribute indicates matching between the number of stations detected on the ring between the current agent and the next agent on Up Stream sense and the n… |
| 1.3.6.1.4.1.81.13.1.1.1.13 | ColumntokRingTraffic | read-only | mandatory | Last traffic reading (sampling time = 100 msec). The traffic is expressed in percents of the maximum Ethernet traffic in the range 1..20, expressed on a log(10… |
| 1.3.6.1.4.1.81.13.1.1.1.14 | ColumntokRingSecurityMethod | read-write | mandatory | Security scheme selected by the user. perPort(1) indicates that secure addresses are defined for each secured token ring port. perRing(2) indicates that a comm… |
| 1.3.6.1.4.1.81.13.1.1.1.15 | ColumntokRingSecurityPolicy | read-write | mandatory | Security policy (trap only or trap and disconnect) selected for the ring. Coded in internal format. |
| 1.3.6.1.4.1.81.13.1.1.1.16 | ColumntokRingSecureAddr | read-write | mandatory | Secure addresses assigned to the ring. Coded in internal format. |
| 1.3.6.1.4.1.81.13.1.1.1.17 | ColumntokRingLastViolation | read-only | mandatory | MAC address of a last detected intruder. |
| 1.3.6.1.4.1.81.13.1.1.1.18 | ColumntokRingUtilization | read-only | mandatory | Last traffic reading (sampling time = 100 msec). The traffic is expressed in percents of the maximum Token Ring traffic. |
| 1.3.6.1.4.1.81.13.1.1.1.19 | ColumntokRingPeakUtilization | read-only | mandatory | Maximal traffic value since last reset of agent. Expressed in percents of the maximum effective TR traffic (token messages are excluded). |
| 1.3.6.1.4.1.81.13.1.1.1.20 | ColumntokRingBeaconingResolution | read-write | mandatory | This parameter enables or disables the beaconing resolution. |
| 1.3.6.1.4.1.81.13.1.1.1.21 | ColumntokRingThresholdStatus | read-only | mandatory | This item is a bitmap that defines the threshold status of the ring, in relation to the alarmPolicyTable. If the ring is monitored by the agent according to po… |
| 1.3.6.1.4.1.81.13.1.1.1.22 | ColumntokRingActiveMonitor | read-only | mandatory | The MAC Address of the station functioning as Active Monitor. |
| 1.3.6.1.4.1.81.13.2 | NodetokGroup | |||
| 1.3.6.1.4.1.81.13.2.1 | TabletokGroupTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.13.2.1.1 | RowtokGroupEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.13.2.1.1.1 | ColumntokGroupId | read-only | mandatory | Number of the slot in which the group is installed. |
| 1.3.6.1.4.1.81.13.2.1.1.2 | ColumntokGroupAutoRightLoop | read-only | mandatory | Value ON of this attribute signifies that a hardware loop was automatically created on a Token Ring module which does not sense the existence of another token … |
| 1.3.6.1.4.1.81.13.2.1.1.3 | ColumntokGroupAutoLeftLoop | read-only | mandatory | Value ON of this attribute signifies that a hardware loop was automatically created on a Token Ring module which does not sense the existence of another token … |
| 1.3.6.1.4.1.81.13.2.1.1.4 | ColumntokGroupManRightLoop | read-write | mandatory | Setting this attribute to ON signifies a command to the hardware to create a loop on the Token Ring module which isolates the ring from the right hand side. In… |
| 1.3.6.1.4.1.81.13.2.1.1.5 | ColumntokGroupManLeftLoop | read-write | mandatory | Setting this attribute to ON signifies a command to the hardware to create a loop on the Token Ring module which isolates the ring from the left hand side. In … |
| 1.3.6.1.4.1.81.13.2.1.1.6 | ColumntokGroupRightNeighbor | read-only | mandatory | Attribute defining the existence of a neighbor another token ring group on the right hand side of the module. In the token ring stackable hub, 'Right' should b… |
| 1.3.6.1.4.1.81.13.2.1.1.7 | ColumntokGroupLeftNeighbor | read-only | mandatory | Attribute defining the existence of a neighbor another token ring group on the left hand side of the module. In the token ring stackable hub, 'Left' should be … |
| 1.3.6.1.4.1.81.13.2.1.1.8 | ColumntokGroupIOMode | read-write | mandatory | Attribute defining the I/O mode (single, dual-ring-in, dual-ring-out) Lobe, Internal Repeater or Star) of a module from the the LTR-IO family. |
| 1.3.6.1.4.1.81.13.2.1.1.9 | ColumntokGroupBridgeMode | read-write | mandatory | Attribute describing the operational mode of the bridge. For ITLB the following modes are defined: - Mode A: First channel connected to an external ring (RI,RO… |
| 1.3.6.1.4.1.81.13.2.1.1.10 | ColumntokGroupManLinkLoop | read-write | mandatory | Setting the value of this attribute to ON instructs the hardware of a Token Ring repeater module to close the loop in the direction of the external connection. |
| 1.3.6.1.4.1.81.13.2.1.1.11 | ColumntokGroupManBusLoop | read-write | mandatory | Setting the value of this attribute to ON instructs the hardware of a Token Ring repeater module to close the loop in the direction of the internal bus. |
| 1.3.6.1.4.1.81.13.2.1.1.12 | ColumntokGroupAutoLinkLoop | read-only | mandatory | Value ON of this attribute signifies that a hardware loop has been auto- matically closed by the hardwar of the Token Ring repeater as a result of problems on … |
| 1.3.6.1.4.1.81.13.2.1.1.13 | ColumntokGroupAutoBusLoop | read-only | mandatory | Value ON of this attribute signifies that a hardware loop has been auto- matically closed by the hardware of the Token Ring repeater as a result of problems on… |
| 1.3.6.1.4.1.81.13.2.1.1.14 | ColumntokGroupSpecificOID | read-only | mandatory | This attribute provides the OID of another group containing additional more specific information regarding this instance. |
| 1.3.6.1.4.1.81.13.2.1.1.15 | ColumntokGroupStarSpeedDetect | read-write | mandatory | This attribute enables the speed detection mechanism for the ports which are in star mode |
| 1.3.6.1.4.1.81.13.2.1.1.16 | ColumntokGroupLobeSpeedDetect | read-write | mandatory | This attribute enables the speed detection mechanism for all ports which are in Lobe mode, at module level. |
| 1.3.6.1.4.1.81.13.2.1.1.17 | ColumntokGroupLSTBeaconing | read-only | mandatory | This item is for LST168 only. The ring is in beaconning state. Value 'on' informs on beacon fault when the number of consecutive beacon frames is above BeaconT… |
| 1.3.6.1.4.1.81.13.2.1.1.18 | ColumntokGroupLSTBeaconThresh | read-write | mandatory | This item is for LST168 only.Threshold for the number of consecutive beacon frames in the ring, above which a beaconning fault is alerted. |
| 1.3.6.1.4.1.81.13.2.2 | TabletokGroupRingTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.13.2.2.1 | RowtokGroupRingEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.13.2.2.1.1 | ColumntokGroupRingGroupId | read-only | mandatory | ID of the group to which the ring belongs. |
| 1.3.6.1.4.1.81.13.2.2.1.2 | ColumntokGroupRingId | read-only | mandatory | ID of the ring. |
| 1.3.6.1.4.1.81.13.2.2.1.3 | ColumntokGroupRingSpeed | read-write | mandatory | Attribute describing the bandwidth of the ring. |
| 1.3.6.1.4.1.81.13.2.2.1.4 | ColumntokGroupRingInserted | read-only | mandatory | Indicates that the bridge interface has inserted itself into the ring. |
| 1.3.6.1.4.1.81.13.2.2.1.5 | ColumntokGroupRingStatus | read-write | mandatory | This item sets the connection of a TR controller to one of its possible connections, identified by the index of this row, for modules with a multiple interface… |
| 1.3.6.1.4.1.81.13.3 | NodetokPort | |||
| 1.3.6.1.4.1.81.13.3.1 | TabletokPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.13.3.1.1 | RowtokPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.13.3.1.1.1 | ColumntokPortGroupId | read-only | mandatory | ID of the group to which the token ring port belongs. |
| 1.3.6.1.4.1.81.13.3.1.1.2 | ColumntokPortId | read-only | mandatory | ID of the port in the tokPortTable. |
| 1.3.6.1.4.1.81.13.3.1.1.3 | ColumntokPortBypass | read-write | mandatory | Setting the value of this attribute to ON causes the by- passing of the TokenRing port. |
| 1.3.6.1.4.1.81.13.3.1.1.4 | ColumntokPortConnected | read-only | mandatory | Attribute which describes the connection status of a Token Ring port (inclusion of the Token Ring controller in the ring). |
| 1.3.6.1.4.1.81.13.3.1.1.5 | ColumntokPortTCP | read-write | mandatory | Setting the value of this attribute to ON causes the activation of the cable-fault detection mechanism. |
| 1.3.6.1.4.1.81.13.3.1.1.6 | ColumntokPortCableFault | read-only | mandatory | Value ON of this attribute signifies the detection of a cable-fault on this specific Token Ring port. |
| 1.3.6.1.4.1.81.13.3.1.1.7 | ColumntokPortFunctionalStatus | read-only | mandatory | The value of this attribute reflects the functional status of Token Ring ports. Note that it is not mandatory that a certain port support all the enumerated st… |
| 1.3.6.1.4.1.81.13.3.1.1.8 | ColumntokPortLastSourceAddr | read-only | mandatory | MAC source address of the last readable frame received by this port. |
| 1.3.6.1.4.1.81.13.3.1.1.9 | ColumntokPortSpecificOID | read-only | mandatory | This attribute provides the OID of another group containing additional more specific information regarding this instance. |
| 1.3.6.1.4.1.81.13.3.1.1.10 | ColumntokPortRingSpeedError | read-only | mandatory | This attribute is set to 'on' when the station tries to enter the ring with a speed different from the speed of the ring. |
| 1.3.6.1.4.1.81.13.3.1.1.11 | ColumntokPortSpeedDetect | read-write | mandatory | This attribute enables the speed detection mechanism on a port level. |
| 1.3.6.1.4.1.81.13.3.1.1.12 | ColumntokPortRingId | read-only | mandatory | Unique identifier of the ring/ring segment to which a specific port is connected. |
| 1.3.6.1.4.1.81.13.3.1.1.13 | ColumntokPortMapping | read-write | mandatory | This attribute enables/disables participation of the selected port in port-to-address correlation algorithm. Default value is on(1). |
| 1.3.6.1.4.1.81.13.4 | NodetokRingStation | |||
| 1.3.6.1.4.1.81.13.4.1 | TabletokRingStationTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.13.4.1.1 | RowtokRingStationEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.13.4.1.1.1 | ColumntokRingStationRingId | read-only | mandatory | ID of the ring in the in which the station is inserted. |
| 1.3.6.1.4.1.81.13.4.1.1.2 | ColumntokRingStationMAC | read-only | mandatory | This item defines the MAC address (in token ring format) of the station connected to the ring. |
| 1.3.6.1.4.1.81.13.4.1.1.3 | ColumntokRingStationLineErrors | read-only | mandatory | This counter is incremented when a frame or token is copied or repeated by a station, the E bit is zero in the frame or token and one of the following conditio… |
| 1.3.6.1.4.1.81.13.4.1.1.4 | ColumntokRingStationInternalErrors | read-only | mandatory | This counter is incremented when a station recognizes an internal error. Internal errors are detected by the adapter's hardware and/or firmware. They usually c… |
| 1.3.6.1.4.1.81.13.4.1.1.5 | ColumntokRingStationBurstErrors | read-only | mandatory | This counter is incremented when a station detects the absence of transitions for five half-bit timers (burst-five error). |
| 1.3.6.1.4.1.81.13.4.1.1.6 | ColumntokRingStationACErrors | read-only | mandatory | This counter is incremented when a station receives an AMP or SMP frame in which A is equal to C is equal to 0, and then receives another SMP frame with A is e… |
| 1.3.6.1.4.1.81.13.4.1.1.7 | ColumntokRingStationAbortsTrans | read-only | mandatory | This counter is incremented when a station transmits an abort delimiter while transmitting. |
| 1.3.6.1.4.1.81.13.4.1.1.8 | ColumntokRingStationLostFrames | read-only | mandatory | This counter is incremented when a station is transmitting and its TRR timer expires. This condition denotes a condition where a transmitting station in strip … |
| 1.3.6.1.4.1.81.13.4.1.1.9 | ColumntokRingStationReceiveCongErrors | read-only | mandatory | This counter is incremented when a station recognizes a frame addressed to its specific address, but has no available buffer space indicating that the station … |
| 1.3.6.1.4.1.81.13.4.1.1.10 | ColumntokRingStationFramesCopied | read-only | mandatory | This counter is incremented when a station recognizes a frame addressed to its specific address and detects that the FS field A bits are set to 1 indicating a … |
| 1.3.6.1.4.1.81.13.4.1.1.11 | ColumntokRingStationFrequencyErrors | read-only | mandatory | The number of times the interface has detected that the frequency of the incoming signal differs from the expected frequency by more than that specified by the… |
| 1.3.6.1.4.1.81.13.4.1.1.12 | ColumntokRingStationTokenErrors | read-only | mandatory | This counter is incremented when a station acting as the active monitor recognizes an error condition that needs a token transmitted. |
| 1.3.6.1.4.1.81.13.4.1.1.13 | ColumntokRingStationTotalErrors | read-only | mandatory | This counter is the sum of all REM counters for this station, i.e.: LineErrors, InternalErrors, BurstErrors, ACErrors, AbortsTrans, LostFrames, FrameCopiedErro… |
| 1.3.6.1.4.1.81.13.4.1.1.14 | ColumntokRingStationFunctionalType | read-only | mandatory | The function of the concerned station in the ring. |
| 1.3.6.1.4.1.81.13.5 | NodetokIntPort | |||
| 1.3.6.1.4.1.81.13.5.1 | TabletokIntPortTable | not-accessible | mandatory | Table of configuration attributes for items specific to token ring internal ports, which can not be addressed via the genIntPort group. |
| 1.3.6.1.4.1.81.13.5.1.1 | RowtokIntPortEntry | not-accessible | mandatory | An entry in the table, containing data about a single port. |
| 1.3.6.1.4.1.81.13.5.1.1.1 | ColumntokIntPortGroupId | read-only | mandatory | Index which identifies the group inside the hub for which this entry contains information. Equals the number of the slot by which the group containing the inte… |
| 1.3.6.1.4.1.81.13.5.1.1.2 | ColumntokIntPortId | read-only | mandatory | Index which identifies the internal port inside the group for which this entry contains information. This value is never greater than genGroupNumberOfIntPorts … |
| 1.3.6.1.4.1.81.13.5.1.1.3 | ColumntokIntPortLeftNeighbor | read-only | mandatory | Attribute defining the existence of another token ring group to the left hand side of the module, on the TR bus to which this intrnal port is connected. The va… |
| 1.3.6.1.4.1.81.13.5.1.1.4 | ColumntokIntPortRightNeighbor | read-only | mandatory | Attribute defining the existence of another token ring group to the left hand side of the module, on the TR bus to which this intrnal port is connected. The va… |
| 1.3.6.1.4.1.81.13.5.1.1.5 | ColumntokIntPortManLeftLoop | read-write | mandatory | Setting this attribute to on signifies a command to the hardware to create a loop to the left of the module, on the bus to which this internal port is connecte… |
| 1.3.6.1.4.1.81.13.5.1.1.6 | ColumntokIntPortManRightLoop | read-write | mandatory | Setting this attribute to on signifies a command to the hardware to create a loop to the left of the module, on the bus to which this internal port is connecte… |
| 1.3.6.1.4.1.81.13.5.1.1.7 | ColumntokIntPortAutoLeftLoop | read-only | mandatory | Value 'on' of this attribute signifies that a left hardware loop was created on the Token Ring bus to which this internal port is connected. |
| 1.3.6.1.4.1.81.13.5.1.1.8 | ColumntokIntPortAutoRightLoop | read-only | mandatory | Value 'on' of this attribute signifies that a right hardware loop was created on the Token Ring bus to which this internal port is connected. |
| 1.3.6.1.4.1.81.14 | Nodets | |||
| 1.3.6.1.4.1.81.14.1 | NodetsGroup | |||
| 1.3.6.1.4.1.81.14.1.1 | TabletsGroupTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.14.1.1.1 | RowtsGroupEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.14.1.1.1.1 | ColumntsGroupId | read-only | mandatory | Number of the slot in which the group is installed. |
| 1.3.6.1.4.1.81.14.1.1.1.2 | ColumntsGroupLATStatus | read-only | mandatory | Value ON of this attribute means that LAT protocol is Enabled on the Ethernet module. |
| 1.3.6.1.4.1.81.14.1.1.1.3 | ColumntsGroupOperationMode | read-only | mandatory | This attribute describes the operation mode of the module in a multiprocessor configuration sensor, as reported by interprocessors communication. |
| 1.3.6.1.4.1.81.15 | Nodeltalk | |||
| 1.3.6.1.4.1.81.15.1 | NodeltalkPort | |||
| 1.3.6.1.4.1.81.15.1.1 | TableltalkPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.15.1.1.1 | RowltalkPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.15.1.1.1.1 | ColumnltalkPortGroupId | read-only | mandatory | Number of the group to which the port belongs. |
| 1.3.6.1.4.1.81.15.1.1.1.2 | ColumnltalkPortId | read-only | mandatory | ID of the port in the ltalkPortTable. |
| 1.3.6.1.4.1.81.15.1.1.1.3 | ColumnltalkPortTest | read-write | mandatory | A value ON of this attribute indicates that a port test should be performed upon the port defined by the attribute instance. |
| 1.3.6.1.4.1.81.15.1.1.1.4 | ColumnltalkPortTestResult | read-only | mandatory | Indicates the result of a port test performed on this port. |
| 1.3.6.1.4.1.81.15.1.1.1.5 | ColumnltalkPortJam | read-only | mandatory | An ON value of this attribute indicates a Jam error on the specific port. |
| 1.3.6.1.4.1.81.16 | Nodecl | |||
| 1.3.6.1.4.1.81.16.1 | NodeclGroup | |||
| 1.3.6.1.4.1.81.16.1.1 | TableclGroupTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.16.1.1.1 | RowclGroupEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.16.1.1.1.1 | ColumnclGroupId | read-only | mandatory | Number of the slot in which the group is installed. |
| 1.3.6.1.4.1.81.16.1.1.1.2 | ColumnclGroupClockRedundancy | read-write | mandatory | Value ON of this attribute defines a redundancy (backup) relationship between the internal and external clocks on the LCL100 module. |
| 1.3.6.1.4.1.81.16.1.1.1.3 | ColumnclGroupMainClock | read-write | mandatory | Value of this attribute is an index into clPortTable, and defines the clock that should operate or a main clock in redundancy scheme. Serves as 'Clock selectio… |
| 1.3.6.1.4.1.81.16.1.1.1.4 | ColumnclGroupTestClocks | read-write | mandatory | A value ON of this attribute indicates that a test should be performed on all clock ports. |
| 1.3.6.1.4.1.81.16.2 | NodeclPort | |||
| 1.3.6.1.4.1.81.16.2.1 | TableclPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.16.2.1.1 | RowclPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.16.2.1.1.1 | ColumnclPortGroupId | read-only | mandatory | Number of the group to which the port belongs. |
| 1.3.6.1.4.1.81.16.2.1.1.2 | ColumnclPortId | read-only | mandatory | ID of the port in the clPortTable. |
| 1.3.6.1.4.1.81.16.2.1.1.3 | ColumnclPortFunctionalStatus | read-only | mandatory | Indicates whether the clock is faulty or not. |
| 1.3.6.1.4.1.81.21 | NodebRouter | |||
| 1.3.6.1.4.1.81.21.1 | Nodeiwb | |||
| 1.3.6.1.4.1.81.21.2 | Nodeiwr | |||
| 1.3.6.1.4.1.81.21.2.1 | TableiwrGroupTable | not-accessible | mandatory | Attributes pertaining to the integrated router module. |
| 1.3.6.1.4.1.81.21.2.1.1 | RowiwrGroupEntry | not-accessible | mandatory | An entry in the table. |
| 1.3.6.1.4.1.81.21.2.1.1.1 | ColumniwrGroupId | read-only | mandatory | Slot number in which the module is located. |
| 1.3.6.1.4.1.81.21.2.1.1.2 | ColumniwrOperState | read-only | mandatory | One of the possible states of the module. run(1) - indicates a successful completion of the boot and self test procedure. boot(2) - indicates that the module i… |
| 1.3.6.1.4.1.81.21.2.1.1.3 | ColumniwrPMState | read-only | mandatory | The state of the Processor Module. |
| 1.3.6.1.4.1.81.21.2.1.1.4 | ColumniwrIOMState | read-only | mandatory | The state of the Input/Output Module. |
| 1.3.6.1.4.1.81.21.2.1.1.5 | ColumniwrEthernetMode | read-write | mandatory | Determines whether the ex10bt(2) LAN controller is connected to the front panel 10BaseT or to backplane bus4(1). |
| 1.3.6.1.4.1.81.21.2.1.1.6 | ColumniwrPrimaryFDDIInsert | read-only | mandatory | This variable is specific to the IEFR router and reflect the status of the Primary - P FDDI interfaces of the router. There is a corresponding LED for each one… |
| 1.3.6.1.4.1.81.21.2.1.1.7 | ColumniwrSecondaryFDDIInsert | read-only | mandatory | This variable is specific to the IEFR router and reflect the status of the Secondary - S FDDI interfaces of the router. There is a corresponding LED for each o… |
| 1.3.6.1.4.1.81.21.2.2 | TableiwrWANTable | not-accessible | mandatory | WAN data table. |
| 1.3.6.1.4.1.81.21.2.2.1 | RowiwrWANEntry | not-accessible | mandatory | Entry in the table. |
| 1.3.6.1.4.1.81.21.2.2.1.1 | ColumniwrWANGroupId | read-only | mandatory | Slot number in which the module is located. |
| 1.3.6.1.4.1.81.21.2.2.1.2 | ColumniwrWANPortId | read-only | mandatory | WAN port index. |
| 1.3.6.1.4.1.81.21.2.2.1.3 | ColumniwrWANConnection | read-only | mandatory | WAN connection status. |
| 1.3.6.1.4.1.81.21.2.2.1.4 | ColumniwrWANPortCableType | read-only | mandatory | Cable type connected to the specified WAN port. |
| 1.3.6.1.4.1.81.21.2.3 | TableiwrInterfaceAddrTable | not-accessible | mandatory | The table contain for each interface: 1. The IP address that was configured to the interface. 2. The IP netmask that was configured to the interface. All the n… |
| 1.3.6.1.4.1.81.21.2.3.1 | RowiwrInterfaceEntry | not-accessible | mandatory | Entry in the table. |
| 1.3.6.1.4.1.81.21.2.3.1.1 | ColumniwrInterfaceGroupId | read-only | mandatory | Slot number in which the module is located. |
| 1.3.6.1.4.1.81.21.2.3.1.2 | ColumniwrInterfaceId | read-only | mandatory | IP Interface port index. |
| 1.3.6.1.4.1.81.21.2.3.1.3 | ColumniwrInterfaceAddr | read-only | mandatory | The IP Address of this indexed port. |
| 1.3.6.1.4.1.81.21.2.3.1.4 | ColumniwrInterfaceMask | read-only | mandatory | The IP Address Mask of this indexed port. |
| 1.3.6.1.4.1.81.21.2.3.1.5 | ColumniwrInterfaceMacAddress | read-only | mandatory | The Mac Address of this indexed interface. |
| 1.3.6.1.4.1.81.21.3 | Nodeitr | |||
| 1.3.6.1.4.1.81.21.3.1 | TableitrGroupTable | not-accessible | mandatory | Table of attributes pertaining to the ITRE module. |
| 1.3.6.1.4.1.81.21.3.1.1 | RowitrGroupEntry | not-accessible | mandatory | An entry in the table. |
| 1.3.6.1.4.1.81.21.3.1.1.1 | ColumnitrGroupId | read-only | mandatory | Slot number in which the module is located. |
| 1.3.6.1.4.1.81.21.3.1.1.2 | ColumnitrMainSWVersion | read-only | mandatory | Software version of the main CPU. |
| 1.3.6.1.4.1.81.21.3.1.1.3 | ColumnitrConfigState | read-only | mandatory | Configuration state of the module. |
| 1.3.6.1.4.1.81.21.3.1.1.4 | ColumnitrModuleState | read-only | mandatory | State of the ISTC/IFTC modules. |
| 1.3.6.1.4.1.81.21.3.2 | TableitrLinkTable | not-accessible | mandatory | ITRE links table. |
| 1.3.6.1.4.1.81.21.3.2.1 | RowitrLinkEntry | not-accessible | mandatory | Entry in the table. |
| 1.3.6.1.4.1.81.21.3.2.1.1 | ColumnitrLinkGroupId | read-only | mandatory | Slot number in which the module is located. |
| 1.3.6.1.4.1.81.21.3.2.1.2 | ColumnitrLinkPortId | read-only | mandatory | Link identifier. |
| 1.3.6.1.4.1.81.21.3.2.1.3 | ColumnitrLinkIf | read-only | mandatory | Interface type. |
| 1.3.6.1.4.1.81.21.3.2.1.4 | ColumnitrLinkMode | read-write | mandatory | Synchronous or asynchronous modes on the link. |
| 1.3.6.1.4.1.81.21.3.2.1.5 | ColumnitrLinkAsyncRate | read-write | mandatory | Possible link speeds that can be set in asynchronous mode. |
| 1.3.6.1.4.1.81.21.3.2.1.6 | ColumnitrLinkSyncRate | read-only | mandatory | Link speeds in synchronous mode. |
| 1.3.6.1.4.1.81.21.3.2.1.7 | ColumnitrLinkParity | read-write | deprecated | This attribute enables/disables parity checking. |
| 1.3.6.1.4.1.81.21.3.2.1.8 | ColumnitrLinkParityEvenOdd | read-write | deprecated | Even or odd parity. |
| 1.3.6.1.4.1.81.21.3.2.1.9 | ColumnitrLinkStopBit | read-write | mandatory | Number of stop bits (1 or 2 ) in asynchronous mode. The value 'none' is returned in synchronous mode. |
| 1.3.6.1.4.1.81.21.3.2.1.10 | ColumnitrLinkRemoteLANConn | read-only | mandatory | This attribute shows whether the remote ITRE is connected to the LAN. |
| 1.3.6.1.4.1.81.21.3.2.1.11 | ColumnitrLinkFunctionalStatus | read-only | mandatory | The attribute represents the status of the WAN link. |
| 1.3.6.1.4.1.81.21.3.2.1.12 | ColumnitrLinkAdminStatus | read-write | mandatory | The administrative status of the WAN port of the ITRE/IERE family. enabled(1) enables the WAN link, disabled(3) disables it, and enableddOnDemand(2) allows the… |
| 1.3.6.1.4.1.81.21.3.2.1.13 | ColumnitrLinkReset | read-write | mandatory | Reset the WAN link |
| 1.3.6.1.4.1.81.21.3.2.1.14 | ColumnitrLinkConnectionStatus | read-only | mandatory | This attribute represents the end-to-end connection status of the WAN link. When the connection is ok, the link is 'on(1)'. When the connection is lost the lin… |
| 1.3.6.1.4.1.81.21.3.2.1.15 | ColumnitrLinkDataBits | read-write | mandatory | Number of data bits (7 or 8) in asynchronous mode. The value 'notSupported' is returned in synchronous mode. |
| 1.3.6.1.4.1.81.21.3.2.1.16 | ColumnitrLinkControlSignalsMode | read-write | mandatory | The value of this attribute determines the control signals (RTS,CTS, CD) mode while working with a MODEM, either in synchronous or asynchronous mode. When the … |
| 1.3.6.1.4.1.81.21.3.2.1.17 | ColumnitrLinkParityType | read-write | mandatory | This attribute represents the parity type in asynchronous mode. The value 'none' is returned in synchronous mode. |
| 1.3.6.1.4.1.81.25 | NodelntFddiGroup | |||
| 1.3.6.1.4.1.81.25.1 | NodelntFddiPort | |||
| 1.3.6.1.4.1.81.25.1.1 | TablelntFddiPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.25.1.1.1 | RowlntFddiPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.25.1.1.1.1 | ColumnlntFddiPortGroupId | read-only | mandatory | Id of the slot to which the fddi port belongs. |
| 1.3.6.1.4.1.81.25.1.1.1.2 | ColumnlntFddiPortId | read-only | mandatory | Id of the port. |
| 1.3.6.1.4.1.81.25.1.1.1.3 | ColumnlntFddiPortMACCurrentPath | read-write | mandatory | Indicates the association of the MAC with the link path. |
| 1.3.6.1.4.1.81.25.1.1.1.4 | ColumnlntFddiPortOpticalSwitchExist | read-only | mandatory | This attribute describes the presence of the optical switch and for existing optical switches describes the possibility of the auto-reconfiguration of path res… |
| 1.3.6.1.4.1.81.25.1.1.1.5 | ColumnlntFddiPortRingConfiguration | read-only | mandatory | Attribute which summarizes the status of the fddi link. It is related to the light detection in the physical fiber. |
| 1.3.6.1.4.1.81.25.1.1.1.6 | ColumnlntFddiPortLineStatusA | read-only | mandatory | Attribute that reflects the status of fddi line, interface a. |
| 1.3.6.1.4.1.81.25.1.1.1.7 | ColumnlntFddiPortLineStatusB | read-only | mandatory | Attribute that reflects the status of fddi line, interface b. |
| 1.3.6.1.4.1.81.25.1.1.1.8 | ColumnlntFddiPortRxTotalPackets | read-only | mandatory | Number of total packets, including errors, received |
| 1.3.6.1.4.1.81.25.1.1.1.9 | ColumnlntFddiPortRxTotalOctets | read-only | mandatory | Number of total octets, including errors, received |
| 1.3.6.1.4.1.81.25.1.1.1.10 | ColumnlntFddiPortTxTotalPackets | read-only | mandatory | Number of total packets, including errors, transmitted |
| 1.3.6.1.4.1.81.25.1.1.1.11 | ColumnlntFddiPortTxTotalOctets | read-only | mandatory | Number of total octets, including errors, transmitted |
| 1.3.6.1.4.1.81.25.1.1.1.12 | ColumnlntFddiPortIPXtoFDDIMatching | read-write | mandatory | Conversion matching from IPX to FDDI in Novell environment |
| 1.3.6.1.4.1.81.25.1.1.1.13 | ColumnlntFddiPortFDDItoIPXMatching | read-write | mandatory | Conversion matching from FDDI to IPX in Novell environment |