MPLS-LSR-MIB
111 objects
This MIB module contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router as defined in: Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, RFC 3031, January 2001. Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3812. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html
Imported Objects
| IANA-ADDRESS-FAMILY-NUMBERS-MIB | AddressFamilyNumbers |
| IF-MIB | ifCounterDiscontinuityGroup ifGeneralInformationGroup InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| MPLS-TC-PRIV-STDEXT-MIB | MplsBitRate MplsBurstSize MplsLabel MplsLSPID MplsOwner mplsStdMIB |
| PRVT-CR-LDP-MIB | mpls |
| PRVT-LMGR-MIB | prvtlmgrLsrEntityLsrIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 zeroDotZero |
| SNMPv2-TC | RowPointer RowStatus StorageType TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.738.10.6.5.5 | IdentitymplsLsrMIB | This MIB module contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router as defined in: Rosen, E., Viswanathan, A., and R. Callo… | ||
| 1.3.6.1.4.1.738.10.6.5.5.1 | NodemplsLsrObjects | |||
| 1.3.6.1.4.1.738.10.6.5.5.1.1 | TablemplsInterfaceTable | not-accessible | current | An entry in this table is created by an LSR for every interface capable of supporting MPLS. The entry with index 0 represents the per-platform label space and … |
| 1.3.6.1.4.1.738.10.6.5.5.1.1.1 | RowmplsInterfaceEntry | not-accessible | current | A conceptual row in this table is created automatically by an LSR for every interface capable of supporting MPLS and which is configured to do so. A conceptual… |
| 1.3.6.1.4.1.738.10.6.5.5.1.1.1.2 | ColumnmplsInterfaceIndex | not-accessible | current | This is a unique index for an entry in the MplsInterfaceTable. A non-zero index for an entry indicates the ifIndex for the corresponding interface entry of the… |
| 1.3.6.1.4.1.738.10.6.5.5.1.1.1.3 | ColumnmplsInterfaceLabelMinIn | read-only | current | This is the minimum value of an MPLS label that this LSR is willing to receive on this interface. |
| 1.3.6.1.4.1.738.10.6.5.5.1.1.1.4 | ColumnmplsInterfaceLabelMaxIn | read-only | current | This is the maximum value of an MPLS label that this LSR is willing to receive on this interface. |
| 1.3.6.1.4.1.738.10.6.5.5.1.1.1.5 | ColumnmplsInterfaceLabelMinOut | read-only | current | This is the minimum value of an MPLS label that this LSR is willing to send on this interface. |
| 1.3.6.1.4.1.738.10.6.5.5.1.1.1.6 | ColumnmplsInterfaceLabelMaxOut | read-only | current | This is the maximum value of an MPLS label that this LSR is willing to send on this interface. |
| 1.3.6.1.4.1.738.10.6.5.5.1.1.1.7 | ColumnmplsInterfaceTotalBandwidth | read-only | current | This value indicates the total amount of usable bandwidth on this interface and is specified in kilobits per second (Kbps). This variable is not applicable whe… |
| 1.3.6.1.4.1.738.10.6.5.5.1.1.1.8 | ColumnmplsInterfaceAvailableBandwidth | read-only | current | This value indicates the total amount of available bandwidth available on this interface and is specified in kilobits per second (Kbps). This value is calculat… |
| 1.3.6.1.4.1.738.10.6.5.5.1.1.1.9 | ColumnmplsInterfaceLabelParticipType | read-only | current | If the value of the mplsInterfaceIndex for this entry is zero, then this entry corresponds to the per-platform label space for all interfaces configured to use… |
| 1.3.6.1.4.1.738.10.6.5.5.1.1.1.10 | ColumnmplsInterfaceSwitchMngedLblSpace | read-only | current | This value indicates whether or not the label space for this interface is managed by the switch itself, rather than by the Label Manager. |
| 1.3.6.1.4.1.738.10.6.5.5.1.3 | TablemplsInSegmentIndexNextTable | not-accessible | current | This table contains the next appropriate value to be used for mplsInSegmentIndex when creating entries in the mplsInSegmentTable. If the number of unassigned e… |
| 1.3.6.1.4.1.738.10.6.5.5.1.3.1 | RowmplsInSegmentIndexNextEntry | not-accessible | current | An entry in this table represents the next available mplsInSegmentIndex for a specific Label Manager entity. This MIB table is indexed by the PRVT-LMGR entity … |
| 1.3.6.1.4.1.738.10.6.5.5.1.3.1.2 | ColumnmplsInSegmentIndexNext | read-only | current | This object contains the next available value to be used for mplsInSegmentIndex when creating entries in the mplsInSegmentTable. The special value of 0 indicat… |
| 1.3.6.1.4.1.738.10.6.5.5.1.4 | TablemplsInSegmentTable | not-accessible | current | This table contains a description of the incoming MPLS segments (labels) to an LSR and their associated parameters. The index for this table is mplsInSegmentIn… |
| 1.3.6.1.4.1.738.10.6.5.5.1.4.1 | RowmplsInSegmentEntry | not-accessible | current | An entry in this table represents one incoming segment as is represented in an LSR's LFIB. An entry can be created by a network administrator or an SNMP agent,… |
| 1.3.6.1.4.1.738.10.6.5.5.1.4.1.2 | ColumnmplsInSegmentIndex | not-accessible | current | The index for this in-segment. The value 0 MUST not be used as an index. |
| 1.3.6.1.4.1.738.10.6.5.5.1.4.1.3 | ColumnmplsInSegmentInterface | read-create | current | This object represents the interface index for the incoming MPLS interface. A value of zero represents all interfaces participating in the per-platform label s… |
| 1.3.6.1.4.1.738.10.6.5.5.1.4.1.4 | ColumnmplsInSegmentLabel | read-create | current | If the corresponding instance of mplsInSegmentLabelPtr is zeroDotZero then this object MUST contain the incoming label associated with this in-segment. If not … |
| 1.3.6.1.4.1.738.10.6.5.5.1.4.1.5 | ColumnmplsInSegmentLabelPtr | read-only | current | If the label for this segment cannot be represented fully within the mplsInSegmentLabel object, this object MUST point to the first accessible column of a conc… |
| 1.3.6.1.4.1.738.10.6.5.5.1.4.1.6 | ColumnmplsInSegmentNPop | read-create | current | The number of labels to pop from the incoming packet. Normally only the top label is popped from the packet and used for all switching decisions for that packe… |
| 1.3.6.1.4.1.738.10.6.5.5.1.4.1.7 | ColumnmplsInSegmentAddrFamily | read-create | current | The IANA address family [IANAFamily] of packets received on this segment, which is used at an egress LSR to deliver them to the appropriate layer 3 entity. A v… |
| 1.3.6.1.4.1.738.10.6.5.5.1.4.1.8 | ColumnmplsInSegmentXCIndex | read-only | current | Index into the mplsXCTable which identifies which cross-connect entry this segment is part of. The value 0 indicates that this entry is not referred to by any … |
| 1.3.6.1.4.1.738.10.6.5.5.1.4.1.9 | ColumnmplsInSegmentOwner | read-only | current | Denotes the entity that created and is responsible for managing this segment. |
| 1.3.6.1.4.1.738.10.6.5.5.1.4.1.10 | ColumnmplsInSegmentTrafficParamPtr | read-create | current | This variable represents a pointer to the traffic parameter specification for this in-segment. This value may point at an entry in the mplsTrafficParamTable to… |
| 1.3.6.1.4.1.738.10.6.5.5.1.4.1.11 | ColumnmplsInSegmentRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row c… |
| 1.3.6.1.4.1.738.10.6.5.5.1.4.1.12 | ColumnmplsInSegmentStorageType | read-create | current | This variable indicates the storage type for this object. The agent MUST ensure that this object's value remains consistent with the associated mplsXCEntry. Co… |
| 1.3.6.1.4.1.738.10.6.5.5.1.6 | TablemplsOutSegmentIndexNextTable | not-accessible | current | This table contains the next appropriate value to be used for mplsOutSegmentIndex when creating entries in the mplsOutSegmentTable. If the number of unassigned… |
| 1.3.6.1.4.1.738.10.6.5.5.1.6.1 | RowmplsOutSegmentIndexNextEntry | not-accessible | current | An entry in this table represents the next available mplsOutSegmentIndex for a specific Label Manager entity. This MIB table is indexed by the PRVT-LMGR entity… |
| 1.3.6.1.4.1.738.10.6.5.5.1.6.1.2 | ColumnmplsOutSegmentIndexNext | read-only | current | This object contains the next available value to be used for mplsOutSegmentIndex when creating entries in the mplsOutSegmentTable. The special value of 0 indic… |
| 1.3.6.1.4.1.738.10.6.5.5.1.7 | TablemplsOutSegmentTable | not-accessible | current | This table contains a representation of the outgoing segments from an LSR. An entry in this table represents one outgoing segment. An entry can be created by a… |
| 1.3.6.1.4.1.738.10.6.5.5.1.7.1 | RowmplsOutSegmentEntry | not-accessible | current | An entry in this table represents one outgoing segment. An entry can be created by a network administrator, an SNMP agent, or an MPLS signaling protocol. The o… |
| 1.3.6.1.4.1.738.10.6.5.5.1.7.1.2 | ColumnmplsOutSegmentIndex | not-accessible | current | This value contains a unique index for this row. While a value of 0 is not valid as an index for entries in this table, it can be supplied as a valid value to … |
| 1.3.6.1.4.1.738.10.6.5.5.1.7.1.3 | ColumnmplsOutSegmentInterface | read-create | current | This value must contain the interface index of the outgoing interface. This object cannot be modified if mplsOutSegmentRowStatus is active(1). The mplsOutSegme… |
| 1.3.6.1.4.1.738.10.6.5.5.1.7.1.4 | ColumnmplsOutSegmentPushTopLabel | read-create | current | This value indicates whether or not a top label should be pushed onto the outgoing packet's label stack. The value of this variable MUST be set to true(1) if t… |
| 1.3.6.1.4.1.738.10.6.5.5.1.7.1.5 | ColumnmplsOutSegmentTopLabel | read-create | current | If mplsOutSegmentPushTopLabel is true then this represents the label that should be pushed onto the top of the outgoing packet's label stack. Otherwise this va… |
| 1.3.6.1.4.1.738.10.6.5.5.1.7.1.6 | ColumnmplsOutSegmentTopLabelPtr | read-only | current | If the label for this segment cannot be represented fully within the mplsOutSegmentLabel object, this object MUST point to the first accessible column of a con… |
| 1.3.6.1.4.1.738.10.6.5.5.1.7.1.7 | ColumnmplsOutSegmentNextHopAddrType | read-create | current | Indicates the next hop Internet address type. Only values unknown(0), ipv4(1) or ipv6(2) have to be supported. A value of unknown(0) is allowed only when the o… |
| 1.3.6.1.4.1.738.10.6.5.5.1.7.1.8 | ColumnmplsOutSegmentNextHopAddr | read-create | current | The internet address of the next hop. The type of this address is determined by the value of the mplslOutSegmentNextHopAddrType object. This object cannot be m… |
| 1.3.6.1.4.1.738.10.6.5.5.1.7.1.9 | ColumnmplsOutSegmentXCIndex | read-only | current | Index into mplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any… |
| 1.3.6.1.4.1.738.10.6.5.5.1.7.1.10 | ColumnmplsOutSegmentOwner | read-only | current | Denotes the entity which created and is responsible for managing this segment. |
| 1.3.6.1.4.1.738.10.6.5.5.1.7.1.11 | ColumnmplsOutSegmentTrafficParamPtr | read-create | current | This variable represents a pointer to the traffic parameter specification for this out-segment. This value may point at an entry in the mplsTrafficParamTable t… |
| 1.3.6.1.4.1.738.10.6.5.5.1.7.1.12 | ColumnmplsOutSegmentRowStatus | read-create | current | For creating, modifying, and deleting this row. When a row in this table has a row in the active(1) state, no objects in this row can be modified except the mp… |
| 1.3.6.1.4.1.738.10.6.5.5.1.7.1.13 | ColumnmplsOutSegmentStorageType | read-create | current | This variable indicates the storage type for this object. The agent MUST ensure that this object's value remains consistent with the associated mplsXCEntry. Co… |
| 1.3.6.1.4.1.738.10.6.5.5.1.9 | TablemplsXCIndexNextTable | not-accessible | current | This table contains the next appropriate value to be used for mplsXCIndex when creating entries in the mplsXCTable. If the number of unassigned entries is exha… |
| 1.3.6.1.4.1.738.10.6.5.5.1.9.1 | RowmplsXCIndexNextEntry | not-accessible | current | An entry in this table represents the next available mplsXcIndex for a specific Label Manager entity. This MIB table is indexed by the PRVT-LMGR entity Index. |
| 1.3.6.1.4.1.738.10.6.5.5.1.9.1.2 | ColumnmplsXCIndexNext | read-only | current | This object contains the next available value to be used for mplsXCIndex when creating entries in the mplsXCTable. A special value of the zero length string in… |
| 1.3.6.1.4.1.738.10.6.5.5.1.10 | TablemplsXCTable | not-accessible | current | This table specifies information for switching between LSP segments. It supports point-to-point, point-to-multipoint and multipoint-to-point connections. mplsL… |
| 1.3.6.1.4.1.738.10.6.5.5.1.10.1 | RowmplsXCEntry | not-accessible | current | A row in this table represents one cross-connect entry. It is indexed by the following objects: - cross-connect index mplsXCIndex that uniquely identifies a gr… |
| 1.3.6.1.4.1.738.10.6.5.5.1.10.1.2 | ColumnmplsXCIndex | not-accessible | current | Primary index for the conceptual row identifying a group of cross-connect segments. The value 0 is an invalid index. |
| 1.3.6.1.4.1.738.10.6.5.5.1.10.1.3 | ColumnmplsXCInSegmentIndex | not-accessible | current | Incoming label index. If this object is set to the value 0, this indicates a special case outlined in the table's description above. In this case no correspond… |
| 1.3.6.1.4.1.738.10.6.5.5.1.10.1.4 | ColumnmplsXCOutSegmentIndex | not-accessible | current | Index of out-segment for LSPs not terminating on this LSR if not set to the value 0. If the segment identified by this entry is terminating, then this object M… |
| 1.3.6.1.4.1.738.10.6.5.5.1.10.1.5 | ColumnmplsXCLspId | read-create | current | This value identifies the label switched path that this cross-connect entry belongs to. This object cannot be modified if mplsXCRowStatus is active(1) except f… |
| 1.3.6.1.4.1.738.10.6.5.5.1.10.1.6 | ColumnmplsXCLabelStackIndex | read-create | current | Primary index into mplsLabelStackTable identifying a stack of labels to be pushed beneath the top label. Note that the top label identified by the out- segment… |
| 1.3.6.1.4.1.738.10.6.5.5.1.10.1.7 | ColumnmplsXCOwner | read-only | current | Denotes the entity that created and is responsible for managing this cross-connect. |
| 1.3.6.1.4.1.738.10.6.5.5.1.10.1.8 | ColumnmplsXCRowStatus | read-create | current | For creating, modifying, and deleting this row. When a row in this table has a row in the active(1) state, no objects in this row except this object and the mp… |
| 1.3.6.1.4.1.738.10.6.5.5.1.10.1.9 | ColumnmplsXCStorageType | read-create | current | This variable indicates the storage type for this object. The agent MUST ensure that the associated in and out segments also have the same StorageType value an… |
| 1.3.6.1.4.1.738.10.6.5.5.1.10.1.10 | ColumnmplsXCAdminStatus | read-create | current | The desired operational status of this segment. |
| 1.3.6.1.4.1.738.10.6.5.5.1.10.1.11 | ColumnmplsXCOperStatus | read-only | current | The actual operational status of this cross-connect. |
| 1.3.6.1.4.1.738.10.6.5.5.1.10.1.12 | ColumnmplsXCUserData | read-create | current | User defined information for this cross-connect. This information will be passed over the LSI on the ATG_LSI_CONNECT_LSP_XC request from Label Manager as xc_us… |
| 1.3.6.1.4.1.738.10.6.5.5.1.11 | TablemplsLabelStackIndexNextTable | not-accessible | current | This table contains the next appropriate value to be used for mplsLabelStackIndex when creating entries in the mplsLabelStackTable. If the number of unassigned… |
| 1.3.6.1.4.1.738.10.6.5.5.1.11.1 | RowmplsLabelStackIndexNextEntry | not-accessible | current | An entry in this table represents the next available mplsLabelStackIndex for a specific Label Manager entity. This MIB table is indexed by the PRVT-LMGR entity… |
| 1.3.6.1.4.1.738.10.6.5.5.1.11.1.2 | ColumnmplsLabelStackIndexNext | read-only | current | This object contains the next available value to be used for mplsLabelStackIndex when creating entries in the mplsLabelStackTable. The special value 0 indicate… |
| 1.3.6.1.4.1.738.10.6.5.5.1.13 | TablemplsLabelStackTable | not-accessible | current | This table specifies the label stack to be pushed onto a packet, beneath the top label. Entries into this table are referred to from mplsXCTable. An entry in t… |
| 1.3.6.1.4.1.738.10.6.5.5.1.13.1 | RowmplsLabelStackEntry | not-accessible | current | An entry in this table represents one label which is to be pushed onto an outgoing packet, beneath the top label. An entry can be created by a network administ… |
| 1.3.6.1.4.1.738.10.6.5.5.1.13.1.2 | ColumnmplsLabelStackIndex | not-accessible | current | Primary index for this row identifying a stack of labels to be pushed on an outgoing packet, beneath the top label. An index of 0 MUST not be used. |
| 1.3.6.1.4.1.738.10.6.5.5.1.13.1.3 | ColumnmplsLabelStackLabelIndex | not-accessible | current | Secondary index for this row identifying one label of the stack. Note that an entry with a smaller mplsLabelStackLabelIndex would refer to a label higher up th… |
| 1.3.6.1.4.1.738.10.6.5.5.1.13.1.4 | ColumnmplsLabelStackLabel | read-create | current | The label to pushed. |
| 1.3.6.1.4.1.738.10.6.5.5.1.13.1.5 | ColumnmplsLabelStackLabelPtr | read-only | current | If the label for this segment cannot be represented fully within the mplsLabelStackLabel object, this object MUST point to the first accessible column of a con… |
| 1.3.6.1.4.1.738.10.6.5.5.1.13.1.6 | ColumnmplsLabelStackRowStatus | read-create | current | For creating, modifying, and deleting this row. When a row in this table has a row in the active(1) state, no objects in this row except this object and the mp… |
| 1.3.6.1.4.1.738.10.6.5.5.1.13.1.7 | ColumnmplsLabelStackStorageType | read-create | current | This variable indicates the storage type for this object. This object cannot be modified if mplsLabelStackRowStatus is active(1). No objects are required to be… |
| 1.3.6.1.4.1.738.10.6.5.5.1.14 | TablemplsInSegmentMapTable | not-accessible | current | This table specifies the mapping from the mplsInSegmentIndex to the corresponding mplsInSegmentInterface and mplsInSegmentLabel objects. The purpose of this ta… |
| 1.3.6.1.4.1.738.10.6.5.5.1.14.1 | RowmplsInSegmentMapEntry | not-accessible | current | An entry in this table represents one interface and incoming label pair. In cases where the label cannot fit into the mplsInSegmentLabel object, the mplsInSegm… |
| 1.3.6.1.4.1.738.10.6.5.5.1.14.1.2 | ColumnmplsInSegmentMapInterface | not-accessible | current | This index contains the same value as the mplsInSegmentIndex in the mplsInSegmentTable. |
| 1.3.6.1.4.1.738.10.6.5.5.1.14.1.3 | ColumnmplsInSegmentMapLabel | not-accessible | current | This index contains the same value as the mplsInSegmentLabel in the mplsInSegmentTable. |
| 1.3.6.1.4.1.738.10.6.5.5.1.14.1.4 | ColumnmplsInSegmentMapLabelPtrIndex | not-accessible | current | This index contains the same value as the mplsInSegmentLabelPtr. If the label for the InSegment cannot be represented fully within the mplsInSegmentLabel objec… |
| 1.3.6.1.4.1.738.10.6.5.5.1.14.1.5 | ColumnmplsInSegmentMapIndex | read-only | current | The mplsInSegmentIndex that corresponds to the mplsInSegmentInterface and mplsInSegmentLabel, or the mplsInSegmentInterface and mplsInSegmentLabelPtr, if appli… |
| 1.3.6.1.4.1.738.10.6.5.5.1.15 | TableprvtlmgrTrapEnableTable | not-accessible | current | The mplsXCTrapEnable Scalar allows a manager to enable or disable TRAPs. |
| 1.3.6.1.4.1.738.10.6.5.5.1.15.1 | RowprvtlmgrTrapEnableEntry | not-accessible | current | The mplsXCTrapEnable Scalar allows a manager to enable or disable TRAPs. PRIVATE EXTENSION. This MIB table is also indexed by the LMGR product Index. |
| 1.3.6.1.4.1.738.10.6.5.5.1.15.1.2 | ColumnmplsXCTrapEnable | read-write | current | If this object is set to true(1), then it enables the emission of mplsXCUp and mplsXCDown notifications; otherwise these notifications are not emitted. |
| 1.3.6.1.4.1.738.10.6.5.5.1.16 | TablemplsTrafficParamIndexNextTable | not-accessible | current | This table contains the next appropriate value to be used for mplsTrafficParamIndex when creating entries in the mplsTrafficParamTable. If the number of unassi… |
| 1.3.6.1.4.1.738.10.6.5.5.1.16.1 | RowmplsTrafficParamIndexNextEntry | not-accessible | current | An entry in this table represents the next available mplsTrafficParamIndex for a specific Label Manager entity. This MIB table is indexed by the PRVT-LMGR enti… |
| 1.3.6.1.4.1.738.10.6.5.5.1.16.1.2 | ColumnmplsTrafficParamIndexNext | read-only | current | The next available index value for the mplsTrafficParamTable. |
| 1.3.6.1.4.1.738.10.6.5.5.1.17 | TablemplsTrafficParamTable | not-accessible | current | This table specifies the Traffic Parameter objects for in and out-segments. An entry in this table represents the TrafficParam objects for one or more in or ou… |
| 1.3.6.1.4.1.738.10.6.5.5.1.17.1 | RowmplsTrafficParamEntry | not-accessible | current | An entry in this table represents the TrafficParam objects for one or more in or out segments. A single entry can be pointed to by multiple segments indicating… |
| 1.3.6.1.4.1.738.10.6.5.5.1.17.1.2 | ColumnmplsTrafficParamIndex | not-accessible | current | Uniquely identifies this row of the table. Note that zero represents an invalid index. |
| 1.3.6.1.4.1.738.10.6.5.5.1.17.1.3 | ColumnmplsTrafficParamMaxRate | read-create | current | Maximum rate in kilobits/second. |
| 1.3.6.1.4.1.738.10.6.5.5.1.17.1.4 | ColumnmplsTrafficParamMeanRate | read-create | current | Mean rate in kilobits/second. |
| 1.3.6.1.4.1.738.10.6.5.5.1.17.1.5 | ColumnmplsTrafficParamMaxBurstSize | read-create | current | Maximum burst size in bytes. |
| 1.3.6.1.4.1.738.10.6.5.5.1.17.1.6 | ColumnmplsTrafficParamRowStatus | read-create | current | For creating, modifying, and deleting this row. |
| 1.3.6.1.4.1.738.10.6.5.5.1.17.1.7 | ColumnmplsTrafficParamStorageType | read-create | current | The storage type for this object. |
| 1.3.6.1.4.1.738.10.6.5.5.2 | NodemplsLsrNotifications | |||
| 1.3.6.1.4.1.738.10.6.5.5.2.0 | NodemplsLsrNotifyPrefix | |||
| 1.3.6.1.4.1.738.10.6.5.5.2.0.1 | NotificationmplsXCUp | current | This notification is generated when the mplsXCOperStatus object for one or more contiguous entries in mplsXCTable are about to enter the up(1) state from some … | |
| 1.3.6.1.4.1.738.10.6.5.5.2.0.2 | NotificationmplsXCDown | current | This notification is generated when the mplsXCOperStatus object for one or more contiguous entries in mplsXCTable are about to enter the down(2) state from som… | |
| 1.3.6.1.4.1.738.10.6.5.5.3 | NodemplsLsrConformance | |||
| 1.3.6.1.4.1.738.10.6.5.5.3.1 | NodemplsLsrGroups | |||
| 1.3.6.1.4.1.738.10.6.5.5.3.1.1 | GroupmplsInterfaceGroup | current | Collection of objects needed for MPLS interface and interface performance information. | |
| 1.3.6.1.4.1.738.10.6.5.5.3.1.2 | GroupmplsInSegmentGroup | current | Collection of objects needed to implement an in- segment. | |
| 1.3.6.1.4.1.738.10.6.5.5.3.1.3 | GroupmplsOutSegmentGroup | current | Collection of objects needed to implement an out- segment. | |
| 1.3.6.1.4.1.738.10.6.5.5.3.1.4 | GroupmplsXCGroup | current | Collection of objects needed to implement a cross-connect entry. | |
| 1.3.6.1.4.1.738.10.6.5.5.3.1.8 | GroupmplsLabelStackGroup | current | Objects needed to support label stacking. | |
| 1.3.6.1.4.1.738.10.6.5.5.3.1.9 | GroupmplsLsrNotificationGroup | current | Set of notifications implemented in this module. | |
| 1.3.6.1.4.1.738.10.6.5.5.3.1.10 | GroupmplsLsrTrafficParamGroup | current | Optional Traffic Param table objects. | |
| 1.3.6.1.4.1.738.10.6.5.5.3.2 | NodemplsLsrCompliances | |||
| 1.3.6.1.4.1.738.10.6.5.5.3.2.1 | CompliancemplsLsrModuleFullCompliance | current | Compliance statement for agents that provide full support for MPLS-LSR-MIB. Such devices can then be monitored and also be configured using this MIB module. | |
| 1.3.6.1.4.1.738.10.6.5.5.3.2.2 | CompliancemplsLsrModuleReadOnlyCompliance | read-only | current | Compliance requirement for implementations that only provide read-only support for MPLS-LSR-MIB. Such devices can then be monitored but cannot be configured us… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MplsIndexNextType | Integer32 (0..2147483647) | current | When a MIB module is used for configuration, an object with this SYNTAX always contains a legal value (a non-zero-length string) for an index that is not currently used in the relevant table. The Command Generator (Netw… |
| MplsIndexType | Integer32 (0..2147483647) | current | This is an octet string that can be used as a table index in cases where a large addressable space is required such as on an LSR where many applications may be provisioning labels. Note that the string containing the si… |