MRD-MIB
147 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.800.3.2.3.1 | NodemrdMIB | |||
| 1.3.6.1.4.1.800.3.2.3.1.1 | NodemrdMIBObjects | |||
| 1.3.6.1.4.1.800.3.2.3.1.1.1 | NodemrdGeneralGroup | |||
| 1.3.6.1.4.1.800.3.2.3.1.1.1.1 | ScalarmrdVersion | read-only | mandatory | The current version of Mrouted. |
| 1.3.6.1.4.1.800.3.2.3.1.1.1.2 | ScalarmrdCachedRouteResTime | read-write | mandatory | The amount of time cached routes stay in memory in seconds. The minimum value is 300, the maximum value is 86,400. |
| 1.3.6.1.4.1.800.3.2.3.1.1.1.3 | ScalarmrdPruneFlag | read-write | mandatory | This flag indicates whether or not this router is a pruning router or not. |
| 1.3.6.1.4.1.800.3.2.3.1.1.1.4 | ScalarmrdConfigUpdate | read-write | mandatory | This flag indicates whether or not the system software will update the online system with the changes entered into the configuration file. This will cause a st… |
| 1.3.6.1.4.1.800.3.2.3.1.1.1.5 | ScalarmrdEnableDisable | read-write | mandatory | This flag indicates whether or not mrouted will be enabled or disabled. |
| 1.3.6.1.4.1.800.3.2.3.1.1.2 | TablemrdIntfBoundaryTable | not-accessible | mandatory | The mrdBoundaryTable contains the entries that describe the mrd boundary table |
| 1.3.6.1.4.1.800.3.2.3.1.1.2.1 | RowmrdIntfBoundaryEntry | not-accessible | mandatory | An entry in the table, containing information about a PNNI logical node in this switching system. |
| 1.3.6.1.4.1.800.3.2.3.1.1.2.1.1 | ColumnmrdIntfPhyIntAddr | read-write | mandatory | This value indicates the physical interface or tunnel address associated with this boundary entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.2.1.2 | ColumnmrdIntfScopedAddress | read-write | mandatory | This value indicates the scoped address for the given boundary. |
| 1.3.6.1.4.1.800.3.2.3.1.1.2.1.3 | ColumnmrdIntfBoundMaskLength | read-write | mandatory | This value gives the mask length of the scoped address. |
| 1.3.6.1.4.1.800.3.2.3.1.1.2.1.4 | ColumnmrdIntfAdminState | read-write | mandatory | This value gives current state of this interface. |
| 1.3.6.1.4.1.800.3.2.3.1.1.3 | TablemrdTunBoundaryTable | not-accessible | mandatory | The mrdBoundaryTable contains the entries that describe the mrd boundary table |
| 1.3.6.1.4.1.800.3.2.3.1.1.3.1 | RowmrdTunBoundaryEntry | not-accessible | mandatory | An entry in the table, containing information about a PNNI logical node in this switching system. |
| 1.3.6.1.4.1.800.3.2.3.1.1.3.1.1 | ColumnmrdTunLocalAddress | read-write | mandatory | This value indicates the physical interface or tunnel address associated with this boundary entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.3.1.2 | ColumnmrdTunRemoteAddress | read-write | mandatory | This value indicates the physical interface or tunnel address associated with this boundary entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.3.1.3 | ColumnmrdTunScopedAddress | read-write | mandatory | This value indicates the scoped address for the given boundary. |
| 1.3.6.1.4.1.800.3.2.3.1.1.3.1.4 | ColumnmrdTunBoundMaskLength | read-write | mandatory | This value gives the mask length of the scoped address. |
| 1.3.6.1.4.1.800.3.2.3.1.1.3.1.5 | ColumnmrdTunAdminState | read-write | mandatory | This value gives current state of this interface. |
| 1.3.6.1.4.1.800.3.2.3.1.1.4 | TablemrdAltNetTable | not-accessible | mandatory | The mrdBoundaryTable contains the entries that describe the mrd boundary table |
| 1.3.6.1.4.1.800.3.2.3.1.1.4.1 | RowmrdAltNetEntry | not-accessible | mandatory | An entry in the table, containing information about a PNNI logical node in this switching system. |
| 1.3.6.1.4.1.800.3.2.3.1.1.4.1.1 | ColumnmrdAltNetAddr | read-write | mandatory | This value indicates the address of the Physical Interface that this alternate network is associated with network. |
| 1.3.6.1.4.1.800.3.2.3.1.1.4.1.2 | ColumnmrdNetworkAddress | read-write | mandatory | This value indicates the network address for the given alternate network. |
| 1.3.6.1.4.1.800.3.2.3.1.1.4.1.3 | ColumnmrdANetMaskLength | read-write | mandatory | This value gives the mask length of the alternate network address. |
| 1.3.6.1.4.1.800.3.2.3.1.1.4.1.4 | ColumnmrdANetAdminState | read-write | mandatory | This value gives current state of this interface. |
| 1.3.6.1.4.1.800.3.2.3.1.1.5 | TablemrdInterfaceTable | not-accessible | mandatory | The mrdInterfaceTable contains the entries that describe the Multicast Interface table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.5.1 | RowmrdInterfaceEntry | not-accessible | mandatory | An entry in the table, containing information about a Multicast Interace Table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.5.1.1 | ColumnmrdIFAddress | read-write | mandatory | This value indicates the network address for the given multicast interface table entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.5.1.2 | ColumnmrdIFEnabledFlag | read-write | mandatory | This value indicates this entry in the Multicast interface table is enabled or not. |
| 1.3.6.1.4.1.800.3.2.3.1.1.5.1.3 | ColumnmrdIFMetric | read-write | mandatory | This value indicates path metric for this entry in the Multicast Interface table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.5.1.4 | ColumnmrdIFThreshold | read-write | mandatory | This value indicates the threshold for this entry in the Multicast Interface table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.5.1.5 | ColumnmrdIFRateLimit | read-write | mandatory | This value indicates the rate limit for this entry in the Multicast Interface table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.5.1.6 | ColumnmrdIFBoundary | read-only | mandatory | This flag indicates whether or not there is a list of boundary addresses associated with this interface table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.5.1.7 | ColumnmrdIFAlternateNetwork | read-only | mandatory | This value indicates whether or not there is a list of alternate network addresses associated with this interface. |
| 1.3.6.1.4.1.800.3.2.3.1.1.5.1.8 | ColumnmrdIFAdminState | read-write | mandatory | This value gives current state of this interface. |
| 1.3.6.1.4.1.800.3.2.3.1.1.6 | TablemrdTunnelTable | not-accessible | mandatory | The mrdTunnelTable contains the entries that describe the Multicast Tunnel table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.6.1 | RowmrdTunnelEntry | not-accessible | mandatory | An entry in the table, containing information about a Multicast Tunnel Table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.6.1.1 | ColumnmrdLocalAddress | read-write | mandatory | This value indicates the local network address for the given multicast tunnel table entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.6.1.2 | ColumnmrdRemoteAddress | read-write | mandatory | This value indicates the remote network address for the given multicast tunnel. |
| 1.3.6.1.4.1.800.3.2.3.1.1.6.1.3 | ColumnmrdTunnelMetric | read-write | mandatory | This value indicates path metric for this entry in the Multicast Tunnel table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.6.1.4 | ColumnmrdTunnelThreshold | read-write | mandatory | This value indicates the threshold for this entry in the Multicast Tunnel table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.6.1.5 | ColumnmrdTunnelRateLimit | read-write | mandatory | This value indicates the rate limit for this entry in the Multicast Tunnel table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.6.1.6 | ColumnmrdTunnelBoundary | read-only | mandatory | This flag indicates whether or not there is a list of boundaries for this tunnel entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.6.1.7 | ColumnmrdTunnelAdminState | read-write | mandatory | This value gives current state of this interface. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7 | TablemrdGroupTable | not-accessible | mandatory | The mrdGroupTable contains one entry for each group or subnet that is defined on the switch. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7.1 | RowmrdGroupEntry | not-accessible | mandatory | An entry in the table, containing information about a Multicast Group Table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7.1.1 | ColumnmrdGroupID | read-only | mandatory | This value indicates the Vlan Group of this entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7.1.2 | ColumnmrdGroupVlanMask | read-only | mandatory | This value indicates the Vlan Mask of the group. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7.1.3 | ColumnmrdGroupSrcIP | read-only | mandatory | This value indicates the source IP address of the group. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7.1.4 | ColumnmrdGroupSrcIPNet | read-only | mandatory | This value indicates the source IP network address of the group. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7.1.5 | ColumnmrdGroupSrcNetMask | read-only | mandatory | This value contains the network mask for the source IP address. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7.1.6 | ColumnmrdGroupMetric | read-only | mandatory | This value indicates the metric for this group. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7.1.7 | ColumnmrdGroupThreshold | read-only | mandatory | This field indicates how may hops the multicast stream can take. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7.1.8 | ColumnmrdGroupRate | read-only | mandatory | This value describes the maximum data rate allowed on this interface. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7.1.9 | ColumnmrdGroupPacketsIn | read-only | mandatory | This value describes the number of packets received on this interface. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7.1.10 | ColumnmrdGroupPacketsOut | read-only | mandatory | This value describes the maximum data rate allowed on this interface. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7.1.11 | ColumnmrdGroupOneWayFlg | read-only | mandatory | This flag indicates whether or not this interface is in one-way mode. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7.1.12 | ColumnmrdGroupDownFlg | read-only | mandatory | This flag indicates whether or not this interface is down. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7.1.13 | ColumnmrdGroupDisabledFlg | read-only | mandatory | This flag indicates whether or not this interface is disabled. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7.1.14 | ColumnmrdGroupQuerierFlg | read-only | mandatory | This flag indicates whether or not this interface is a querier. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7.1.15 | ColumnmrdGroupSrcRteFlg | read-only | mandatory | This flag indicates whether or not this interface is source routed. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7.1.16 | ColumnmrdGroupLeafFlg | read-only | mandatory | This flag indicates whether or not this interface is a leaf. |
| 1.3.6.1.4.1.800.3.2.3.1.1.7.1.17 | ColumnmrdGroupIgmpv1Flg | read-only | mandatory | This flag indicates whether or not this interface is running IGMP V1. |
| 1.3.6.1.4.1.800.3.2.3.1.1.8 | TablemrdTunnelListTable | not-accessible | mandatory | The mrdTunnelListTable contains one entry for each group or subnet that is defined on the switch. |
| 1.3.6.1.4.1.800.3.2.3.1.1.8.1 | RowmrdTunnelListEntry | not-accessible | mandatory | An entry in the table, containing information about a Multicast Tunnel List Table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.8.1.1 | ColumnmrdTunnelListGrpID | read-only | mandatory | This value indicates the Vlan Group of this entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.8.1.2 | ColumnmrdTunnelListVlanMask | read-only | mandatory | This value indicates the Vlan Mask of the tunnel. |
| 1.3.6.1.4.1.800.3.2.3.1.1.8.1.3 | ColumnmrdTunnelListSrcIP | read-only | mandatory | This value indicates the source IP address of the tunnel. |
| 1.3.6.1.4.1.800.3.2.3.1.1.8.1.4 | ColumnmrdTunnelListDstIP | read-only | mandatory | This value indicates the destination or remote IP address of the tunnel. |
| 1.3.6.1.4.1.800.3.2.3.1.1.8.1.5 | ColumnmrdTunnelListMetric | read-only | mandatory | This value indicates the metric for this tunnel. |
| 1.3.6.1.4.1.800.3.2.3.1.1.8.1.6 | ColumnmrdTunnelListThreshold | read-only | mandatory | This field indicates how may hops the multicast stream can take. |
| 1.3.6.1.4.1.800.3.2.3.1.1.8.1.7 | ColumnmrdTunnelListRate | read-only | mandatory | This value describes the maximum data rate allowed on this interface. |
| 1.3.6.1.4.1.800.3.2.3.1.1.8.1.8 | ColumnmrdTunnelListPacketsIn | read-only | mandatory | This value describes the number of packets received on this interface. |
| 1.3.6.1.4.1.800.3.2.3.1.1.8.1.9 | ColumnmrdTunnelListPacketsOut | read-only | mandatory | This value describes the maximum data rate allowed on this interface. |
| 1.3.6.1.4.1.800.3.2.3.1.1.8.1.10 | ColumnmrdTunnelListOneWayFlg | read-only | mandatory | This flag indicates whether or not this interface is in one-way mode. |
| 1.3.6.1.4.1.800.3.2.3.1.1.8.1.11 | ColumnmrdTunnelListDownFlg | read-only | mandatory | This flag indicates whether or not this interface is down. |
| 1.3.6.1.4.1.800.3.2.3.1.1.8.1.12 | ColumnmrdTunnelListDisabledFlg | read-only | mandatory | This flag indicates whether or not this interface is disabled. |
| 1.3.6.1.4.1.800.3.2.3.1.1.8.1.13 | ColumnmrdTunnelListQuerierFlg | read-only | mandatory | This flag indicates whether or not this interface is a querier. |
| 1.3.6.1.4.1.800.3.2.3.1.1.8.1.14 | ColumnmrdTunnelListSrcRteFlg | read-only | mandatory | This flag indicates whether or not this interface is source routed. |
| 1.3.6.1.4.1.800.3.2.3.1.1.8.1.15 | ColumnmrdTunnelListLeafFlg | read-only | mandatory | This flag indicates whether or not this interface is a leaf. |
| 1.3.6.1.4.1.800.3.2.3.1.1.8.1.16 | ColumnmrdTunnelListIgmpv1Flg | read-only | mandatory | This flag indicates whether or not this interface is running IGMP V1. |
| 1.3.6.1.4.1.800.3.2.3.1.1.9 | TablemrdPeerTable | not-accessible | mandatory | The mrdPeerTable contains one entry for each group or subnet that is defined on the switch. |
| 1.3.6.1.4.1.800.3.2.3.1.1.9.1 | RowmrdPeerEntry | not-accessible | mandatory | An entry in the table, containing information about a Multicast Tunnel List Table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.9.1.1 | ColumnmrdPeerGrpID | read-only | mandatory | This value indicates the Vlan Group of this entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.9.1.2 | ColumnmrdPeerVlanMask | read-only | mandatory | This value indicates the Vlan Mask of this entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.9.1.3 | ColumnmrdPeerSrcIP | read-only | mandatory | This value indicates the source IP address of the interface. |
| 1.3.6.1.4.1.800.3.2.3.1.1.9.1.4 | ColumnmrdPeerPeerIP | read-only | mandatory | This value indicates the IP address of the peer. |
| 1.3.6.1.4.1.800.3.2.3.1.1.9.1.5 | ColumnmrdPeerMajorLevel | read-only | mandatory | This value indicates the major version level of this peer. |
| 1.3.6.1.4.1.800.3.2.3.1.1.9.1.6 | ColumnmrdPeerMinorLevel | read-only | mandatory | This field indicates the minor version level of this peer. |
| 1.3.6.1.4.1.800.3.2.3.1.1.9.1.7 | ColumnmrdPeerTimer | read-only | mandatory | This value indicates the number of seconds since a neighbor probe has been received. |
| 1.3.6.1.4.1.800.3.2.3.1.1.9.1.8 | ColumnmrdPeerFlags | read-only | mandatory | This value describes the raw contents of the peer's flag byte. |
| 1.3.6.1.4.1.800.3.2.3.1.1.9.1.9 | ColumnmrdPeerLeafFlag | read-only | mandatory | This flag indicates whether or not this peer is a leaf. |
| 1.3.6.1.4.1.800.3.2.3.1.1.9.1.10 | ColumnmrdPeerPruneFlag | read-only | mandatory | This flag indicates whether or not this peer supports pruning. |
| 1.3.6.1.4.1.800.3.2.3.1.1.9.1.11 | ColumnmrdPeerGenIdFlag | read-only | mandatory | This flag indicates whether or not this peer includes the genid and rtlist in probes. |
| 1.3.6.1.4.1.800.3.2.3.1.1.9.1.12 | ColumnmrdPeerMtraceFlag | read-only | mandatory | This flag indicates whether or not this peer supports mtrace requests. |
| 1.3.6.1.4.1.800.3.2.3.1.1.10 | TablemrdAltNetList | not-accessible | mandatory | The mrdAltNetListTable contains one entry for each alternate Network that is currently running in the switch. |
| 1.3.6.1.4.1.800.3.2.3.1.1.10.1 | RowmrdAltNetListEntry | not-accessible | mandatory | An entry in the table, containing information about an Alternate Network List Table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.10.1.1 | ColumnmrdAltNetListGrpID | read-only | mandatory | This value indicates the Vlan Group of this entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.10.1.2 | ColumnmrdAltNetListVlanMask | read-only | mandatory | This value indicates the Vlan Mask of this entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.10.1.3 | ColumnmrdAltNetListSrcIP | read-only | mandatory | This value indicates the source IP address of the interface. |
| 1.3.6.1.4.1.800.3.2.3.1.1.10.1.4 | ColumnmrdAltNetListAltNetIP | read-only | mandatory | This value indicates the IP address of the Alternate Network. |
| 1.3.6.1.4.1.800.3.2.3.1.1.10.1.5 | ColumnmrdAltNetListAltNetNetMask | read-only | mandatory | This value contains the network mask for the Alternate Network IP address. |
| 1.3.6.1.4.1.800.3.2.3.1.1.11 | TablemrdBoundaryList | not-accessible | mandatory | The mrdBoundaryListTable contains one entry for each boundary entry that is running in the switch. |
| 1.3.6.1.4.1.800.3.2.3.1.1.11.1 | RowmrdBoundaryListEntry | not-accessible | mandatory | An entry in the table, containing information about a Boundary List Table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.11.1.1 | ColumnmrdBoundaryListGrpID | read-only | mandatory | This value indicates the Vlan Group of this entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.11.1.2 | ColumnmrdBoundaryListVlanMask | read-only | mandatory | This value indicates the Vlan Mask of this entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.11.1.3 | ColumnmrdBoundaryListSrcIP | read-only | mandatory | This value indicates the source IP address of the interface. |
| 1.3.6.1.4.1.800.3.2.3.1.1.11.1.4 | ColumnmrdBoundaryListBoundaryIP | read-only | mandatory | This value indicates the IP address of the Boundary entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.11.1.5 | ColumnmrdBoundaryListBoundaryNetMask | read-only | mandatory | This value contains the network mask for the Boundary Network IP address. |
| 1.3.6.1.4.1.800.3.2.3.1.1.12 | TablemrdGroupMemTable | not-accessible | mandatory | The mrdGroupMem contains one entry for each Multicast Group membership entry that is running in the switch. |
| 1.3.6.1.4.1.800.3.2.3.1.1.12.1 | RowmrdGroupMemEntry | not-accessible | mandatory | An entry in the table, containing information about a Group Membership Table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.12.1.1 | ColumnmrdGroupMemGrpID | read-only | mandatory | This value indicates the Vlan Group of this entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.12.1.2 | ColumnmrdGroupMemVlanMask | read-only | mandatory | This value indicates the Vlan Mask of this entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.12.1.3 | ColumnmrdGroupMemSrcIP | read-only | mandatory | This value indicates the source IP address of the interface. |
| 1.3.6.1.4.1.800.3.2.3.1.1.12.1.4 | ColumnmrdGroupMemIP | read-only | mandatory | This value indicates the IP address of the IP Multicast group membership. |
| 1.3.6.1.4.1.800.3.2.3.1.1.12.1.5 | ColumnmrdGroupMemTimer | read-only | mandatory | This value indicates the number of seconds before this membership times out. |
| 1.3.6.1.4.1.800.3.2.3.1.1.13 | TablemrdForwardingTable | not-accessible | mandatory | The mrdForwardingTable contains one entry for each entry in the forwarding table on the switch. |
| 1.3.6.1.4.1.800.3.2.3.1.1.13.1 | RowmrdForwardingEntry | not-accessible | mandatory | An entry in the table, containing information about a Forwarding Table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.13.1.1 | ColumnmrdForwardingSrcIP | read-only | mandatory | This value indicates the Source IP address of this multicast stream. |
| 1.3.6.1.4.1.800.3.2.3.1.1.13.1.2 | ColumnmrdForwardingDstIP | read-only | mandatory | This value indicates the destination IP address of this multicast stream. |
| 1.3.6.1.4.1.800.3.2.3.1.1.13.1.3 | ColumnmrdForwardingGrpID | read-only | mandatory | This value indicates the Destination Group ID for this multicast stream. |
| 1.3.6.1.4.1.800.3.2.3.1.1.13.1.4 | ColumnmrdForwardingVlanMask | read-only | mandatory | This value indicates the Vlan mask of the forwarding group. |
| 1.3.6.1.4.1.800.3.2.3.1.1.13.1.5 | ColumnmrdForwardingSrcGrpID | read-only | mandatory | This value contains the Vlan Group ID where this stream originates. |
| 1.3.6.1.4.1.800.3.2.3.1.1.13.1.6 | ColumnmrdForwardingSrcVlanMask | read-only | mandatory | This value contains the Vlan mask of the source group. |
| 1.3.6.1.4.1.800.3.2.3.1.1.14 | TablemrdPruneTable | not-accessible | mandatory | The mrdPruneTable contains one entry for each entry in the prune table on the switch. |
| 1.3.6.1.4.1.800.3.2.3.1.1.14.1 | RowmrdPruneEntry | not-accessible | mandatory | An entry in the table, containing information about a Prune Table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.14.1.1 | ColumnmrdPruneDstGroup | read-only | mandatory | This value indicates the Destination IP address that is being pruned. |
| 1.3.6.1.4.1.800.3.2.3.1.1.14.1.2 | ColumnmrdPrunePruningRouter | read-only | mandatory | This value indicates the IP address of the router that is pruning. |
| 1.3.6.1.4.1.800.3.2.3.1.1.14.1.3 | ColumnmrdPruneGrpID | read-only | mandatory | This value indicates the Group ID of the pruning router. |
| 1.3.6.1.4.1.800.3.2.3.1.1.14.1.4 | ColumnmrdPruneVlanMask | read-only | mandatory | This value indicates the Vlan mask of the pruning router. |
| 1.3.6.1.4.1.800.3.2.3.1.1.14.1.5 | ColumnmrdPruneTimer | read-only | mandatory | This value contains the timer value associated with this prune entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.15 | TablemrdRouteTable | not-accessible | mandatory | The mrdRouteTable contains one entry for each entry in the forwarding table on the switch. |
| 1.3.6.1.4.1.800.3.2.3.1.1.15.1 | RowmrdRouteEntry | not-accessible | mandatory | An entry in the table, containing information about a Route Table. |
| 1.3.6.1.4.1.800.3.2.3.1.1.15.1.1 | ColumnmrdRouteOriginIP | read-only | mandatory | This value indicates the IP address of origin of this route. |
| 1.3.6.1.4.1.800.3.2.3.1.1.15.1.2 | ColumnmrdRouteOriginMask | read-only | mandatory | This value indicates the network mask of the origin. |
| 1.3.6.1.4.1.800.3.2.3.1.1.15.1.3 | ColumnmrdRouteGatewayIP | read-only | mandatory | This value indicates the IP address of the gateway. |
| 1.3.6.1.4.1.800.3.2.3.1.1.15.1.4 | ColumnmrdRouteGrpID | read-only | mandatory | This value indicates the Group ID for which the entry has a route. |
| 1.3.6.1.4.1.800.3.2.3.1.1.15.1.5 | ColumnmrdRouteVlanMask | read-only | mandatory | This value contains the Vlan mask for the group. |
| 1.3.6.1.4.1.800.3.2.3.1.1.15.1.6 | ColumnmrdRouteLeafFlag | read-only | mandatory | This value contains a flag indicating if the router in the route entry is a leaf router or not. |
| 1.3.6.1.4.1.800.3.2.3.1.1.15.1.7 | ColumnmrdRouteTunFlag | read-only | mandatory | This value contains a flag indicating if the router in the route entry is a tunnel or not. |
| 1.3.6.1.4.1.800.3.2.3.1.1.15.1.8 | ColumnmrdRouteSrcGrpID | read-only | mandatory | This value contains the Vlan group of the interface that received this route entry. |
| 1.3.6.1.4.1.800.3.2.3.1.1.15.1.9 | ColumnmrdRouteSrcVlanMask | read-only | mandatory | This value contains the Vlan mask of the source group. |
| 1.3.6.1.4.1.800.3.2.3.1.1.15.1.10 | ColumnmrdRouteMetric | read-only | mandatory | This value contains the metric for this route. |
| 1.3.6.1.4.1.800.3.2.3.1.1.15.1.11 | ColumnmrdRouteTimer | read-only | mandatory | This value contains the timer value for this route entry. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |