MIB Viewer

Search, upload, browse, or download from a database of over 11,000 SNMP MIBs. MIB Viewer lets you look up any MIB object by name, OID, or number, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

NETGEAR-NSF-MIB

31 objects

This MIB defines the objects used for FastPath to configure and report information and status of NSF features.

Imported Objects

NETGEAR-INVENTORY-MIB	agentInventoryUnitEntry agentInventoryUnitNumber
NETGEAR-REF-MIB	ng7000managedswitch
SNMPv2-CONF	MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI	Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TC	DisplayString RowStatus TEXTUAL-CONVENTION TruthValue

OID	Name	Access	Status	Description
1.3.6.1.4.1.4526.10.46	IdentityfastPathNsf			This MIB defines the objects used for FastPath to configure and report information and status of NSF features.
1.3.6.1.4.1.4526.10.46.0	NodeagentNsfTraps
1.3.6.1.4.1.4526.10.46.0.1	NotificationagentNsfStackRestartComplete		current	Sent when the stack finishes restarting after a failover.
1.3.6.1.4.1.4526.10.46.1	TableagentNsfUnitTable	not-accessible	current	A table of Per-Unit configuration objects for NSF.
1.3.6.1.4.1.4526.10.46.1.1	RowagentNsfUnitEntry	not-accessible	current	Each Instance corresponds with a different unit managed by this agent.
1.3.6.1.4.1.4526.10.46.1.1.1	ColumnagentNsfUnitSupport	read-only	current	Indicates if the unit supports the NSF feature.
1.3.6.1.4.1.4526.10.46.2	NodeagentNsfGroup
1.3.6.1.4.1.4526.10.46.2.1	ScalaragentNsfAdminStatus	read-write	current	Controls whether NSF is enabled on the unit/stack.
1.3.6.1.4.1.4526.10.46.2.2	ScalaragentNsfOperStatus	read-only	current	Indicates whether NSF is enabled on the unit/stack.
1.3.6.1.4.1.4526.10.46.2.3	ScalaragentNsfLastStartupReason	read-only	current	The type of activation that caused the software to start the last time. unknown: The switch rebooted for an unknown reason. power-on: The switch rebooted. This…
1.3.6.1.4.1.4526.10.46.2.4	ScalaragentNsfTimeSinceLastRestart	read-only	current	Time since the current management card became the active management card.
1.3.6.1.4.1.4526.10.46.2.5	ScalaragentNsfRestartInProgress	read-only	current	Whether a restart is in progress. A restart is not considered complete until all hardware tables have been fully reconciled.
1.3.6.1.4.1.4526.10.46.2.6	ScalaragentNsfWarmRestartReady	read-only	current	Whether the initial full checkpoint has finished.
1.3.6.1.4.1.4526.10.46.2.7	ScalaragentNsfBackupConfigurationAge	read-only	current	Age of the configuration on the backup unit. The time since the running configuration was last copied to the backup unit.
1.3.6.1.4.1.4526.10.46.2.8	ScalaragentNsfInitiateFailover	read-write	current	Triggers an administrative failover to the backup unit.
1.3.6.1.4.1.4526.10.46.3	NodeagentCheckpointStatsGroup
1.3.6.1.4.1.4526.10.46.3.1	ScalaragentCheckpointClearStatistics	read-write	current	When set to enable(1), resets checkpoint statistics.
1.3.6.1.4.1.4526.10.46.3.2	ScalaragentCheckpointMessages	read-only	current	Total number of checkpoint messages sent.
1.3.6.1.4.1.4526.10.46.3.3	ScalaragentCheckpointBytes	read-only	current	Size in bytes of the total ammount of checkpoint messages sent.
1.3.6.1.4.1.4526.10.46.3.4	ScalaragentCheckpointTimeSinceCountersCleared	read-only	current	Indicates how long since the Checkpoint counters have been cleared.
1.3.6.1.4.1.4526.10.46.3.5	ScalaragentCheckpointMessageRateInterval	read-only	current	Indicates the duration in seconds of the message rate interval.
1.3.6.1.4.1.4526.10.46.3.6	ScalaragentCheckpointMessageRate	read-only	current	Number of checkpoint messages received in the last interval defined by agentCheckpointMessageRateInterval.
1.3.6.1.4.1.4526.10.46.3.7	ScalaragentCheckpointHighestMessageRate	read-only	current	Highest number of checkpoint messages received in an interval defined by agentCheckpointMessageRateInterval.
1.3.6.1.4.1.4526.10.46.4	NodeagentNsfOspfGroup
1.3.6.1.4.1.4526.10.46.4.1	ScalaragentNsfOspfSupportMode	read-write	current
1.3.6.1.4.1.4526.10.46.4.2	ScalaragentNsfOspfRestartInterval	read-write	current
1.3.6.1.4.1.4526.10.46.4.3	ScalaragentNsfOspfRestartStatus	read-only	current
1.3.6.1.4.1.4526.10.46.4.4	ScalaragentNsfOspfRestartAge	read-only	current
1.3.6.1.4.1.4526.10.46.4.5	ScalaragentNsfOspfRestartExitReason	read-only	current
1.3.6.1.4.1.4526.10.46.4.6	ScalaragentNsfOspfHelperSupportMode	read-write	current
1.3.6.1.4.1.4526.10.46.4.7	ScalaragentNsfOspfHelperStrictLSAChecking	read-write	current