NETSERVER-MIB
427 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge TimeTicks |
| RFC1213-MIB | DisplayString mib-2 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.25 | Nodehost | |||
| 1.3.6.1.2.1.25.1 | NodehrSystem | |||
| 1.3.6.1.2.1.25.1.1 | ScalarhrSystemUptime | read-only | mandatory | The amount of time since this host was last initialized. Note that this is different from sysUpTime in MIB-II [3] because sysUpTime is the uptime of the networ… |
| 1.3.6.1.2.1.25.1.2 | ScalarhrSystemDate | read-write | mandatory | The host's notion of the local date and time of day. |
| 1.3.6.1.2.1.25.1.3 | ScalarhrSystemInitialLoadDevice | read-write | mandatory | The index of the hrDeviceEntry for the device from which this host is configured to load its initial operating system configuration. |
| 1.3.6.1.2.1.25.1.4 | ScalarhrSystemInitialLoadParameters | read-write | mandatory | This object contains the parameters (e.g. a pathname and parameter) supplied to the load device when requesting the initial operating system configuration from… |
| 1.3.6.1.2.1.25.1.5 | ScalarhrSystemNumUsers | read-only | mandatory | The number of user sessions for which this host is storing state information. A session is a collection of processes requiring a single act of user authenticat… |
| 1.3.6.1.2.1.25.1.6 | ScalarhrSystemProcesses | read-only | mandatory | The number of process contexts currently loaded or running on this system. |
| 1.3.6.1.2.1.25.1.7 | ScalarhrSystemMaxProcesses | read-only | mandatory | The maximum number of process contexts this system can support. If there is no fixed maximum, the value should be zero. On systems that have a fixed maximum, t… |
| 1.3.6.1.2.1.25.2 | NodehrStorage | |||
| 1.3.6.1.2.1.25.2.1 | NodehrStorageTypes | |||
| 1.3.6.1.2.1.25.2.1.1 | NodehrStorageOther | |||
| 1.3.6.1.2.1.25.2.1.2 | NodehrStorageRam | |||
| 1.3.6.1.2.1.25.2.1.3 | NodehrStorageVirtualMemory | |||
| 1.3.6.1.2.1.25.2.1.4 | NodehrStorageFixedDisk | |||
| 1.3.6.1.2.1.25.2.1.5 | NodehrStorageRemovableDisk | |||
| 1.3.6.1.2.1.25.2.1.6 | NodehrStorageFloppyDisk | |||
| 1.3.6.1.2.1.25.2.1.7 | NodehrStorageCompactDisc | |||
| 1.3.6.1.2.1.25.2.1.8 | NodehrStorageRamDisk | |||
| 1.3.6.1.2.1.25.2.2 | ScalarhrMemorySize | read-only | mandatory | The amount of physical main memory contained by the host. |
| 1.3.6.1.2.1.25.2.3 | TablehrStorageTable | not-accessible | mandatory | The (conceptual) table of logical storage areas on the host. An entry shall be placed in the storage table for each logical area of storage that is allocated a… |
| 1.3.6.1.2.1.25.2.3.1 | RowhrStorageEntry | not-accessible | mandatory | A (conceptual) entry for one logical storage area on the host. As an example, an instance of the hrStorageType object might be named hrStorageType.3 |
| 1.3.6.1.2.1.25.2.3.1.1 | ColumnhrStorageIndex | read-only | mandatory | A unique value for each logical storage area contained by the host. |
| 1.3.6.1.2.1.25.2.3.1.2 | ColumnhrStorageType | read-only | mandatory | The type of storage represented by this entry. |
| 1.3.6.1.2.1.25.2.3.1.3 | ColumnhrStorageDescr | read-only | mandatory | A description of the type and instance of the storage described by this entry. |
| 1.3.6.1.2.1.25.2.3.1.4 | ColumnhrStorageAllocationUnits | read-only | mandatory | The size, in bytes, of the data objects allocated from this pool. If this entry is monitoring sectors, blocks, buffers, or packets, for example, this number wi… |
| 1.3.6.1.2.1.25.2.3.1.5 | ColumnhrStorageSize | read-write | mandatory | The size of the storage represented by this entry, in units of hrStorageAllocationUnits. |
| 1.3.6.1.2.1.25.2.3.1.6 | ColumnhrStorageUsed | read-only | mandatory | The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits. |
| 1.3.6.1.2.1.25.2.3.1.7 | ColumnhrStorageAllocationFailures | read-only | mandatory | The number of requests for storage represented by this entry that could not be honored due to not enough storage. It should be noted that as this object has a … |
| 1.3.6.1.2.1.25.3 | NodehrDevice | |||
| 1.3.6.1.2.1.25.3.1 | NodehrDeviceTypes | |||
| 1.3.6.1.2.1.25.3.1.1 | NodehrDeviceOther | |||
| 1.3.6.1.2.1.25.3.1.2 | NodehrDeviceUnknown | |||
| 1.3.6.1.2.1.25.3.1.3 | NodehrDeviceProcessor | |||
| 1.3.6.1.2.1.25.3.1.4 | NodehrDeviceNetwork | |||
| 1.3.6.1.2.1.25.3.1.5 | NodehrDevicePrinter | |||
| 1.3.6.1.2.1.25.3.1.6 | NodehrDeviceDiskStorage | |||
| 1.3.6.1.2.1.25.3.1.10 | NodehrDeviceVideo | |||
| 1.3.6.1.2.1.25.3.1.11 | NodehrDeviceAudio | |||
| 1.3.6.1.2.1.25.3.1.12 | NodehrDeviceCoprocessor | |||
| 1.3.6.1.2.1.25.3.1.13 | NodehrDeviceKeyboard | |||
| 1.3.6.1.2.1.25.3.1.14 | NodehrDeviceModem | |||
| 1.3.6.1.2.1.25.3.1.15 | NodehrDeviceParallelPort | |||
| 1.3.6.1.2.1.25.3.1.16 | NodehrDevicePointing | |||
| 1.3.6.1.2.1.25.3.1.17 | NodehrDeviceSerialPort | |||
| 1.3.6.1.2.1.25.3.1.18 | NodehrDeviceTape | |||
| 1.3.6.1.2.1.25.3.1.19 | NodehrDeviceClock | |||
| 1.3.6.1.2.1.25.3.1.20 | NodehrDeviceVolatileMemory | |||
| 1.3.6.1.2.1.25.3.1.21 | NodehrDeviceNonVolatileMemory | |||
| 1.3.6.1.2.1.25.3.2 | TablehrDeviceTable | not-accessible | mandatory | The (conceptual) table of devices contained by the host. |
| 1.3.6.1.2.1.25.3.2.1 | RowhrDeviceEntry | not-accessible | mandatory | A (conceptual) entry for one device contained by the host. As an example, an instance of the hrDeviceType object might be named hrDeviceType.3 |
| 1.3.6.1.2.1.25.3.2.1.1 | ColumnhrDeviceIndex | read-only | mandatory | A unique value for each device contained by the host. The value for each device must remain constant at least from one re-initialization of the agent to the ne… |
| 1.3.6.1.2.1.25.3.2.1.2 | ColumnhrDeviceType | read-only | mandatory | An indication of the type of device. If this value is `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry exists in the hrProcessorTable which corresponds to… |
| 1.3.6.1.2.1.25.3.2.1.3 | ColumnhrDeviceDescr | read-only | mandatory | A textual description of this device, including the device's manufacturer and revision, and optionally, its serial number. |
| 1.3.6.1.2.1.25.3.2.1.4 | ColumnhrDeviceID | read-only | mandatory | The product ID for this device. |
| 1.3.6.1.2.1.25.3.2.1.5 | ColumnhrDeviceStatus | read-only | mandatory | The current operational state of the device described by this row of the table. A value unknown(1) indicates that the current state of the device is unknown. r… |
| 1.3.6.1.2.1.25.3.2.1.6 | ColumnhrDeviceErrors | read-only | mandatory | The number of errors detected on this device. It should be noted that as this object has a SYNTAX of Counter, that it does not have a defined initial value. Ho… |
| 1.3.6.1.2.1.25.3.3 | TablehrProcessorTable | not-accessible | mandatory | The (conceptual) table of processors contained by the host. Note that this table is potentially sparse: a (conceptual) entry exists only if the correspondent v… |
| 1.3.6.1.2.1.25.3.3.1 | RowhrProcessorEntry | not-accessible | mandatory | A (conceptual) entry for one processor contained by the host. The hrDeviceIndex in the index represents the entry in the hrDeviceTable that corresponds to the … |
| 1.3.6.1.2.1.25.3.3.1.1 | ColumnhrProcessorFrwID | read-only | mandatory | The product ID of the firmware associated with the processor. |
| 1.3.6.1.2.1.25.3.3.1.2 | ColumnhrProcessorLoad | read-only | mandatory | The average, over the last minute, of the percentage of time that this processor was not idle. |
| 1.3.6.1.2.1.25.3.4 | TablehrNetworkTable | not-accessible | mandatory | The (conceptual) table of network devices contained by the host. Note that this table is potentially sparse: a (conceptual) entry exists only if the correspond… |
| 1.3.6.1.2.1.25.3.4.1 | RowhrNetworkEntry | not-accessible | mandatory | A (conceptual) entry for one network device contained by the host. The hrDeviceIndex in the index represents the entry in the hrDeviceTable that corresponds to… |
| 1.3.6.1.2.1.25.3.4.1.1 | ColumnhrNetworkIfIndex | read-only | mandatory | The value of ifIndex which corresponds to this network device. |
| 1.3.6.1.2.1.25.3.5 | TablehrPrinterTable | not-accessible | mandatory | The (conceptual) table of printers local to the host. Note that this table is potentially sparse: a (conceptual) entry exists only if the correspondent value o… |
| 1.3.6.1.2.1.25.3.5.1 | RowhrPrinterEntry | not-accessible | mandatory | A (conceptual) entry for one printer local to the host. The hrDeviceIndex in the index represents the entry in the hrDeviceTable that corresponds to the hrPrin… |
| 1.3.6.1.2.1.25.3.5.1.1 | ColumnhrPrinterStatus | read-only | mandatory | The current status of this printer device. When in the idle(1), printing(2), or warmup(3) state, the corresponding hrDeviceStatus should be running(2) or warni… |
| 1.3.6.1.2.1.25.3.5.1.2 | ColumnhrPrinterDetectedErrorState | read-only | mandatory | This object represents any error conditions detected by the printer. The error conditions are encoded as bits in an octet string, with the following definition… |
| 1.3.6.1.2.1.25.3.6 | TablehrDiskStorageTable | not-accessible | mandatory | The (conceptual) table of long-term storage devices contained by the host. In particular, disk devices accessed remotely over a network are not included here. … |
| 1.3.6.1.2.1.25.3.6.1 | RowhrDiskStorageEntry | not-accessible | mandatory | A (conceptual) entry for one long-term storage device contained by the host. The hrDeviceIndex in the index represents the entry in the hrDeviceTable that corr… |
| 1.3.6.1.2.1.25.3.6.1.1 | ColumnhrDiskStorageAccess | read-only | mandatory | An indication if this long-term storage device is readable and writable or only readable. This should reflect the media type, any write-protect mechanism, and … |
| 1.3.6.1.2.1.25.3.6.1.2 | ColumnhrDiskStorageMedia | read-only | mandatory | An indication of the type of media used in this long-term storage device. |
| 1.3.6.1.2.1.25.3.6.1.3 | ColumnhrDiskStorageRemoveble | read-only | mandatory | Denotes whether or not the disk media may be removed from the drive. |
| 1.3.6.1.2.1.25.3.6.1.4 | ColumnhrDiskStorageCapacity | read-only | mandatory | The total size for this long-term storage device. |
| 1.3.6.1.2.1.25.3.7 | TablehrPartitionTable | not-accessible | mandatory | The (conceptual) table of partitions for long-term storage devices contained by the host. In particular, partitions accessed remotely over a network are not in… |
| 1.3.6.1.2.1.25.3.7.1 | RowhrPartitionEntry | not-accessible | mandatory | A (conceptual) entry for one partition. The hrDeviceIndex in the index represents the entry in the hrDeviceTable that corresponds to the hrPartitionEntry. As a… |
| 1.3.6.1.2.1.25.3.7.1.1 | ColumnhrPartitionIndex | read-only | mandatory | A unique value for each partition on this long- term storage device. The value for each long-term storage device must remain constant at least from one re-init… |
| 1.3.6.1.2.1.25.3.7.1.2 | ColumnhrPartitionLabel | read-only | mandatory | A textual description of this partition. |
| 1.3.6.1.2.1.25.3.7.1.3 | ColumnhrPartitionID | read-only | mandatory | A descriptor which uniquely represents this partition to the responsible operating system. On some systems, this might take on a binary representation. |
| 1.3.6.1.2.1.25.3.7.1.4 | ColumnhrPartitionSize | read-only | mandatory | The size of this partition. |
| 1.3.6.1.2.1.25.3.7.1.5 | ColumnhrPartitionFSIndex | read-only | mandatory | The index of the file system mounted on this partition. If no file system is mounted on this partition, then this value shall be zero. Note that multiple parti… |
| 1.3.6.1.2.1.25.3.8 | TablehrFSTable | not-accessible | mandatory | The (conceptual) table of file systems local to this host or remotely mounted from a file server. File systems that are in only one user's environment on a mul… |
| 1.3.6.1.2.1.25.3.8.1 | RowhrFSEntry | not-accessible | mandatory | A (conceptual) entry for one file system local to this host or remotely mounted from a file server. File systems that are in only one user's environment on a m… |
| 1.3.6.1.2.1.25.3.8.1.1 | ColumnhrFSIndex | read-only | mandatory | A unique value for each file system local to this host. The value for each file system must remain constant at least from one re-initialization of the agent to… |
| 1.3.6.1.2.1.25.3.8.1.2 | ColumnhrFSMountPoint | read-only | mandatory | The path name of the root of this file system. |
| 1.3.6.1.2.1.25.3.8.1.3 | ColumnhrFSRemoteMountPoint | read-only | mandatory | A description of the name and/or address of the server that this file system is mounted from. This may also include parameters such as the mount point on the r… |
| 1.3.6.1.2.1.25.3.8.1.4 | ColumnhrFSType | read-only | mandatory | The value of this object identifies the type of this file system. |
| 1.3.6.1.2.1.25.3.8.1.5 | ColumnhrFSAccess | read-only | mandatory | An indication if this file system is logically configured by the operating system to be readable and writable or only readable. This does not represent any loc… |
| 1.3.6.1.2.1.25.3.8.1.6 | ColumnhrFSBootable | read-only | mandatory | A flag indicating whether this file system is bootable. |
| 1.3.6.1.2.1.25.3.8.1.7 | ColumnhrFSStorageIndex | read-only | mandatory | The index of the hrStorageEntry that represents information about this file system. If there is no such information available, then this value shall be zero. T… |
| 1.3.6.1.2.1.25.3.8.1.8 | ColumnhrFSLastFullBackupDate | read-write | mandatory | The last date at which this complete file system was copied to another storage device for backup. This information is useful for ensuring that backups are bein… |
| 1.3.6.1.2.1.25.3.8.1.9 | ColumnhrFSLastPartialBackupDate | read-write | mandatory | The last date at which a portion of this file system was copied to another storage device for backup. This information is useful for ensuring that backups are … |
| 1.3.6.1.2.1.25.3.9 | NodehrFSTypes | |||
| 1.3.6.1.2.1.25.3.9.1 | NodehrFSOther | |||
| 1.3.6.1.2.1.25.3.9.2 | NodehrFSUnknown | |||
| 1.3.6.1.2.1.25.3.9.3 | NodehrFSBerkeleyFFS | |||
| 1.3.6.1.2.1.25.3.9.4 | NodehrFSSys5FS | |||
| 1.3.6.1.2.1.25.3.9.5 | NodehrFSFat | |||
| 1.3.6.1.2.1.25.3.9.6 | NodehrFSHPFS | |||
| 1.3.6.1.2.1.25.3.9.7 | NodehrFSHFS | |||
| 1.3.6.1.2.1.25.3.9.8 | NodehrFSMFS | |||
| 1.3.6.1.2.1.25.3.9.9 | NodehrFSNTFS | |||
| 1.3.6.1.2.1.25.3.9.10 | NodehrFSVNode | |||
| 1.3.6.1.2.1.25.3.9.11 | NodehrFSJournaled | |||
| 1.3.6.1.2.1.25.3.9.12 | NodehrFSiso9660 | |||
| 1.3.6.1.2.1.25.3.9.13 | NodehrFSRockRidge | |||
| 1.3.6.1.2.1.25.3.9.14 | NodehrFSNFS | |||
| 1.3.6.1.2.1.25.3.9.15 | NodehrFSNetware | |||
| 1.3.6.1.2.1.25.3.9.16 | NodehrFSAFS | |||
| 1.3.6.1.2.1.25.3.9.17 | NodehrFSDFS | |||
| 1.3.6.1.2.1.25.3.9.18 | NodehrFSAppleshare | |||
| 1.3.6.1.2.1.25.3.9.19 | NodehrFSRFS | |||
| 1.3.6.1.2.1.25.3.9.20 | NodehrFSDGCFS | |||
| 1.3.6.1.2.1.25.3.9.21 | NodehrFSBFS | |||
| 1.3.6.1.4.1.80 | Nodeauspex | |||
| 1.3.6.1.4.1.80.1 | NodefileSystemFullTrap | Trap indicating that a file system got full. | ||
| 1.3.6.1.4.1.80.2 | NodefileSystemDegradationTrap | Trap indicating that a file system got degradated. | ||
| 1.3.6.1.4.1.80.3 | NodediskStackUpdationTrap | Trap indicating that a disk was removed. | ||
| 1.3.6.1.4.1.80.3 | NodenetServer | |||
| 1.3.6.1.4.1.80.3.1 | NodeaxProductInfo | |||
| 1.3.6.1.4.1.80.3.1.1 | ScalaraxProductName | read-only | mandatory | Name of the file server product. |
| 1.3.6.1.4.1.80.3.1.2 | ScalaraxSWVersion | read-only | mandatory | Version of the M16 Kernel on Netserver |
| 1.3.6.1.4.1.80.3.1.3 | ScalaraxNumNPFSP | read-only | mandatory | Number of NPFSP boards on file server. |
| 1.3.6.1.4.1.80.3.2 | NodeaxNP | |||
| 1.3.6.1.4.1.80.3.2.1 | TablenpTable | not-accessible | mandatory | A table for all NPs(Network Processors) on the file server. |
| 1.3.6.1.4.1.80.3.2.1.1 | RownpEntry | not-accessible | mandatory | An entry for each NP on the file server. |
| 1.3.6.1.4.1.80.3.2.1.1.1 | ColumnnpIndex | read-only | mandatory | A unique number for identifying an NP in the system. |
| 1.3.6.1.4.1.80.3.2.1.1.2 | ColumnnpBusyCount | read-only | mandatory | Busy counts of NP. |
| 1.3.6.1.4.1.80.3.2.1.1.3 | ColumnnpIdleCount | read-only | mandatory | Idle counts of NP. |
| 1.3.6.1.4.1.80.3.2.2 | TablenpIfTable | not-accessible | mandatory | Table containing information for each interface of NP. It maps the interface with the NP |
| 1.3.6.1.4.1.80.3.2.2.1 | RownpIfEntry | not-accessible | mandatory | Entry for each interface |
| 1.3.6.1.4.1.80.3.2.2.1.1 | ColumnnpIfIndex | read-only | mandatory | A unique number for an interface for a given NP |
| 1.3.6.1.4.1.80.3.2.2.1.2 | ColumnnpIfifIndex | read-only | mandatory | Corresponding ifINdex in ifTable of mib-2 |
| 1.3.6.1.4.1.80.3.2.2.1.3 | ColumnnpIfType | read-only | mandatory | Type of network interface |
| 1.3.6.1.4.1.80.3.2.2.1.4 | ColumnnpIfSpeed | read-only | mandatory | Nominal Interface Speed (in millions of bits per second) |
| 1.3.6.1.4.1.80.3.2.2.1.5 | ColumnnpIfInOctets | read-only | mandatory | The total number of octets received on the interface, including framing characters |
| 1.3.6.1.4.1.80.3.2.2.1.6 | ColumnnpIfInUcastPkts | read-only | mandatory | The number of subnetwork-unicast packets delivered to a higher-layer protocol |
| 1.3.6.1.4.1.80.3.2.2.1.7 | ColumnnpIfInNUcastPkts | read-only | mandatory | The number of non-unicast (i.e., subnetwork-broadcast or multicast) packets delivered to a higher-layer protocol |
| 1.3.6.1.4.1.80.3.2.2.1.8 | ColumnnpIfInDiscards | read-only | mandatory | The inbound packet discard count even though no errors were detected. One reason for discarding could be to free up buffer space |
| 1.3.6.1.4.1.80.3.2.2.1.9 | ColumnnpIfInErrors | read-only | mandatory | The input-packet error count for an interface for a given NP |
| 1.3.6.1.4.1.80.3.2.2.1.10 | ColumnnpIfInUnknownProto | read-only | mandatory | The input-packet discard count due to an unknown or unsupported protocol |
| 1.3.6.1.4.1.80.3.2.2.1.11 | ColumnnpIfOutOctets | read-only | mandatory | The total number of octets transmitted out of the interface, including framing characters |
| 1.3.6.1.4.1.80.3.2.2.1.12 | ColumnnpIfOutUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se… |
| 1.3.6.1.4.1.80.3.2.2.1.13 | ColumnnpIfOutNUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted to a non-unicast (i.e., a subnetwork-broadcast or multicast) address, includin… |
| 1.3.6.1.4.1.80.3.2.2.1.14 | ColumnnpIfOutDiscards | read-only | mandatory | The number of outbound packets that were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possibel reason… |
| 1.3.6.1.4.1.80.3.2.2.1.15 | ColumnnpIfOutErrors | read-only | mandatory | The number of outbound packets that could not be transmitted because of errors |
| 1.3.6.1.4.1.80.3.2.2.1.16 | ColumnnpIfOutCollisions | read-only | mandatory | The output-packet collision count for an interface for a given NP |
| 1.3.6.1.4.1.80.3.2.2.1.17 | ColumnnpIfOutQLen | read-only | mandatory | The output-packet queue length (in packets) for an interface for a given NP |
| 1.3.6.1.4.1.80.3.2.2.1.18 | ColumnnpIfAdminStatus | read-write | mandatory | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.80.3.2.2.1.19 | ColumnnpIfOperStatus | read-only | mandatory | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.80.3.2.3 | NodenpProtocols | |||
| 1.3.6.1.4.1.80.3.2.3.1 | TablenpIPTable | not-accessible | mandatory | Table for Internet Protocol statistics for each NP of the system. |
| 1.3.6.1.4.1.80.3.2.3.1.1 | RownpIPEntry | not-accessible | mandatory | An entry for each NP in the system. |
| 1.3.6.1.4.1.80.3.2.3.1.1.1 | ColumnnpIPForwarding | read-only | mandatory | |
| 1.3.6.1.4.1.80.3.2.3.1.1.2 | ColumnnpIPDefaultTTL | read-only | mandatory | NP IP default Time To Live. |
| 1.3.6.1.4.1.80.3.2.3.1.1.3 | ColumnnpIPInReceives | read-only | mandatory | NP IP received packet count. |
| 1.3.6.1.4.1.80.3.2.3.1.1.4 | ColumnnpIPInHdrErrors | read-only | mandatory | NP IP header error count. |
| 1.3.6.1.4.1.80.3.2.3.1.1.5 | ColumnnpIPInAddrErrors | read-only | mandatory | NP IP address error count. |
| 1.3.6.1.4.1.80.3.2.3.1.1.6 | ColumnnpIPForwDatagrams | read-only | mandatory | NP IP forwarded datagram count. |
| 1.3.6.1.4.1.80.3.2.3.1.1.7 | ColumnnpIPInUnknownProtos | read-only | mandatory | NP IP input packet with unknown protocol. |
| 1.3.6.1.4.1.80.3.2.3.1.1.8 | ColumnnpIPInDiscards | read-only | mandatory | NP IP discarded input packet count. |
| 1.3.6.1.4.1.80.3.2.3.1.1.9 | ColumnnpIPInDelivers | read-only | mandatory | NP IP delivered input packet count. |
| 1.3.6.1.4.1.80.3.2.3.1.1.10 | ColumnnpIPOutRequests | read-only | mandatory | NP IP tx packet count. |
| 1.3.6.1.4.1.80.3.2.3.1.1.11 | ColumnnpIPOutDiscards | read-only | mandatory | NP IP discarded out packet count. |
| 1.3.6.1.4.1.80.3.2.3.1.1.12 | ColumnnpIPOutNoRoutes | read-only | mandatory | NP IP tx fails due to no route count. |
| 1.3.6.1.4.1.80.3.2.3.1.1.13 | ColumnnpIPReasmTimeout | read-only | mandatory | NP IP reassembly time out count. |
| 1.3.6.1.4.1.80.3.2.3.1.1.14 | ColumnnpIPReasmReqds | read-only | mandatory | NP IP reassembly required count. |
| 1.3.6.1.4.1.80.3.2.3.1.1.15 | ColumnnpIPReasmOKs | read-only | mandatory | NP IP reassembly success count. |
| 1.3.6.1.4.1.80.3.2.3.1.1.16 | ColumnnpIPReasmFails | read-only | mandatory | NP IP reassembly failure count. |
| 1.3.6.1.4.1.80.3.2.3.1.1.17 | ColumnnpIPFragOKs | read-only | mandatory | NP IP fragmentation success count. |
| 1.3.6.1.4.1.80.3.2.3.1.1.18 | ColumnnpIPFragFails | read-only | mandatory | NP IP fragmentation failure count. |
| 1.3.6.1.4.1.80.3.2.3.1.1.19 | ColumnnpIPFragCreates | read-only | mandatory | NP IP fragment created count. |
| 1.3.6.1.4.1.80.3.2.3.1.1.20 | ColumnnpIPRoutingDiscards | read-only | mandatory | NP IP discarded route count. |
| 1.3.6.1.4.1.80.3.2.3.2 | TablenpICMPTable | not-accessible | mandatory | Table for Internet Control Message Protocol statistics for each NP of the system. |
| 1.3.6.1.4.1.80.3.2.3.2.1 | RownpICMPEntry | not-accessible | mandatory | An entry for each NP in the system. |
| 1.3.6.1.4.1.80.3.2.3.2.1.1 | ColumnnpICMPInMsgs | read-only | mandatory | NP ICMP input message count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.2 | ColumnnpICMPInErrors | read-only | mandatory | NP ICMP input error packet count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.3 | ColumnnpICMPInDestUnreachs | read-only | mandatory | NP ICMP input destination unreachable count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.4 | ColumnnpICMPInTimeExcds | read-only | mandatory | NP ICMP input time exceeded count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.5 | ColumnnpICMPInParmProbs | read-only | mandatory | NP ICMP input parameter problem packet count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.6 | ColumnnpICMPInSrcQuenchs | read-only | mandatory | NP ICMP input source quench packet count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.7 | ColumnnpICMPInRedirects | read-only | mandatory | NP ICMP input redirect packet count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.8 | ColumnnpICMPInEchos | read-only | mandatory | NP ICMP input echo count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.9 | ColumnnpICMPInEchoReps | read-only | mandatory | NP ICMP input echo reply count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.10 | ColumnnpICMPInTimestamps | read-only | mandatory | NP ICMP input timestamp count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.11 | ColumnnpICMPInTimestampReps | read-only | mandatory | NP ICMP input timestamp reply count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.12 | ColumnnpICMPInAddrMasks | read-only | mandatory | NP ICMP input address mask count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.13 | ColumnnpICMPInAddrMaskReps | read-only | mandatory | NP ICMP input address mask reply count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.14 | ColumnnpICMPOutMsgs | read-only | mandatory | NP ICMP output message count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.15 | ColumnnpICMPOutErrors | read-only | mandatory | NP ICMP output error packet count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.16 | ColumnnpICMPOutDestUnreachs | read-only | mandatory | NP ICMP output destination unreachable count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.17 | ColumnnpICMPOutTimeExcds | read-only | mandatory | NP ICMP output time exceeded count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.18 | ColumnnpICMPOutParmProbs | read-only | mandatory | NP ICMP output parameter problem packet count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.19 | ColumnnpICMPOutSrcQuenchs | read-only | mandatory | NP ICMP output source quench packet count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.20 | ColumnnpICMPOutRedirects | read-only | mandatory | NP ICMP output redirect packet count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.21 | ColumnnpICMPOutEchos | read-only | mandatory | NP ICMP output echo count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.22 | ColumnnpICMPOutEchoReps | read-only | mandatory | NP ICMP output echo reply count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.23 | ColumnnpICMPOutTimestamps | read-only | mandatory | NP ICMP output timestamp count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.24 | ColumnnpICMPOutTimestampReps | read-only | mandatory | NP ICMP output timestamp reply count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.25 | ColumnnpICMPOutAddrMasks | read-only | mandatory | NP ICMP output address mask count. |
| 1.3.6.1.4.1.80.3.2.3.2.1.26 | ColumnnpICMPOutAddrMaskReps | read-only | mandatory | NP ICMP output address mask reply count. |
| 1.3.6.1.4.1.80.3.2.3.3 | TablenpTCPTable | not-accessible | mandatory | Table for Transmission Control Protocol statistics for each NP of the system. |
| 1.3.6.1.4.1.80.3.2.3.3.1 | RownpTCPEntry | not-accessible | mandatory | An entry for each NP in the system. |
| 1.3.6.1.4.1.80.3.2.3.3.1.1 | ColumnnpTCPRtoAlgorithm | read-only | mandatory | NP TCP Round Trip Algorithm type. |
| 1.3.6.1.4.1.80.3.2.3.3.1.2 | ColumnnpTCPRtoMin | read-only | mandatory | NP TCP minimum RTO. |
| 1.3.6.1.4.1.80.3.2.3.3.1.3 | ColumnnpTCPRtoMax | read-only | mandatory | NP TCP maximum RTO. |
| 1.3.6.1.4.1.80.3.2.3.3.1.4 | ColumnnpTCPMaxConn | read-only | mandatory | NP TCP maximum number of connections. |
| 1.3.6.1.4.1.80.3.2.3.3.1.5 | ColumnnpTCPActiveOpens | read-only | mandatory | NP TCP active open count. |
| 1.3.6.1.4.1.80.3.2.3.3.1.6 | ColumnnpTCPPassiveOpens | read-only | mandatory | NP TCP passive open count. |
| 1.3.6.1.4.1.80.3.2.3.3.1.7 | ColumnnpTCPAttemptFails | read-only | mandatory | NP TCP connect attempt fails. |
| 1.3.6.1.4.1.80.3.2.3.3.1.8 | ColumnnpTCPEstabResets | read-only | mandatory | NP TCP reset of established session. |
| 1.3.6.1.4.1.80.3.2.3.3.1.9 | ColumnnpTCPCurrEstab | read-only | mandatory | NP TCP current established session count. |
| 1.3.6.1.4.1.80.3.2.3.3.1.10 | ColumnnpTCPInSegs | read-only | mandatory | NP TCP input segments count. |
| 1.3.6.1.4.1.80.3.2.3.3.1.11 | ColumnnpTCPOutSegs | read-only | mandatory | NP TCP output segments count. |
| 1.3.6.1.4.1.80.3.2.3.3.1.12 | ColumnnpTCPRetransSegs | read-only | mandatory | NP TCP retransmitted segments count. |
| 1.3.6.1.4.1.80.3.2.3.3.1.13 | ColumnnpTCPInErrs | read-only | mandatory | NP TCP input error packets count. |
| 1.3.6.1.4.1.80.3.2.3.3.1.14 | ColumnnpTCPOutRsts | read-only | mandatory | NP TCP output reset packets count. |
| 1.3.6.1.4.1.80.3.2.3.4 | TablenpUDPTable | not-accessible | mandatory | Table for User Datagram Protocol statistics for each NP of the system. |
| 1.3.6.1.4.1.80.3.2.3.4.1 | RownpUDPEntry | not-accessible | mandatory | An entry for each NP in the system. |
| 1.3.6.1.4.1.80.3.2.3.4.1.1 | ColumnnpUDPInDatagrams | read-only | mandatory | NP UDP input datagram count. |
| 1.3.6.1.4.1.80.3.2.3.4.1.2 | ColumnnpUDPNoPorts | read-only | mandatory | NP UDP number of ports. |
| 1.3.6.1.4.1.80.3.2.3.4.1.3 | ColumnnpUDPInErrors | read-only | mandatory | NP UDP input error count. |
| 1.3.6.1.4.1.80.3.2.3.4.1.4 | ColumnnpUDPOutDatagrams | read-only | mandatory | Np UDP output datagram count. |
| 1.3.6.1.4.1.80.3.2.3.5 | TablenpNFSTable | not-accessible | mandatory | Table for Network File System statistics for each NP in the system. |
| 1.3.6.1.4.1.80.3.2.3.5.1 | RownpNFSEntry | not-accessible | mandatory | An entry for each NP in the system. |
| 1.3.6.1.4.1.80.3.2.3.5.1.1 | ColumnnpNFSDCounts | read-only | mandatory | NP NFS count (obtained from NFS daemon) |
| 1.3.6.1.4.1.80.3.2.3.5.1.2 | ColumnnpNFSDNJobs | read-only | mandatory | NP NFS number of jobs (obtained from NFS daemon) |
| 1.3.6.1.4.1.80.3.2.3.5.1.3 | ColumnnpNFSDBusyCounts | read-only | mandatory | NP NFS busy count (obtained from NFS daemon) |
| 1.3.6.1.4.1.80.3.2.3.6 | TablenpSMBTable | not-accessible | mandatory | Contains statistical counts for the SMB protocol per NP |
| 1.3.6.1.4.1.80.3.2.3.6.1 | RownpSMBEntry | not-accessible | mandatory | An entry for each NP in the system. |
| 1.3.6.1.4.1.80.3.2.3.6.1.1 | ColumnnpSMBRcvd | read-only | mandatory | The total number of SMB netbios messages received. |
| 1.3.6.1.4.1.80.3.2.3.6.1.2 | ColumnnpSMBBytesRcvd | read-only | mandatory | The total number of SMB related bytes rvcd by this NP from a client (does not include netbios header bytes). |
| 1.3.6.1.4.1.80.3.2.3.6.1.3 | ColumnnpSMBBytesSent | read-only | mandatory | The total SMB related bytes sent by this NP to a client (does not include netbios header bytes). |
| 1.3.6.1.4.1.80.3.2.3.6.1.4 | ColumnnpSMBReads | read-only | mandatory | The total number of SMB reads consisting of the following opcodes: SMB-COM-READ, SMB-COM-LOCK-AND-READ, SMB-COM-READ-RAW, SMB-COM-READ-MPX, SMB-COM-READ-MPX-SE… |
| 1.3.6.1.4.1.80.3.2.3.6.1.5 | ColumnnpSMBWrites | read-only | mandatory | The total number of SMB writes consisting of the following opcodes: SMB-COM-WRITE, SMB-COM-WRITE-AND-UNLOCK, SMB-COM-WRITE-RAW, SMB-COM-WRITE-MPX, SMB-COM-WRIT… |
| 1.3.6.1.4.1.80.3.2.3.6.1.6 | ColumnnpSMBOpens | read-only | mandatory | The total number of SMB opens consisting of the SMB-COM-OPEN, SMB-COM-CREATE,SMB-COM-CREATE-TEMPORARY,SMB-COM-CREATE-NEW, TRANS2-OPEN2, NT-TRANSACT-CREATE and … |
| 1.3.6.1.4.1.80.3.2.3.6.1.7 | ColumnnpSMBCloses | read-only | mandatory | The total number of SMB SMB-COM-CLOSE opcodes recieved. |
| 1.3.6.1.4.1.80.3.2.3.6.1.8 | ColumnnpSMBErrors | read-only | mandatory | The total number of invalid netbios messages recieved. |
| 1.3.6.1.4.1.80.3.2.3.6.1.9 | ColumnnpSMBLocksHeld | read-only | mandatory | The total number of locks currently held |
| 1.3.6.1.4.1.80.3.3 | NodeaxFSP | |||
| 1.3.6.1.4.1.80.3.3.1 | TablefspTable | not-accessible | mandatory | A table for all FSPs(File and Storage Processors) on the file server. |
| 1.3.6.1.4.1.80.3.3.1.1 | RowfspEntry | not-accessible | mandatory | An entry for one FSP on the file server. |
| 1.3.6.1.4.1.80.3.3.1.1.1 | ColumnfspIndex | read-only | mandatory | A unique number for identifying an FSP in the system. |
| 1.3.6.1.4.1.80.3.3.1.1.2 | ColumnfspBusyCount | read-only | mandatory | Busy counts of FSP. |
| 1.3.6.1.4.1.80.3.3.1.1.3 | ColumnfspIdleCount | read-only | mandatory | Idle counts of FSP. |
| 1.3.6.1.4.1.80.3.3.2 | NodeaxFP | |||
| 1.3.6.1.4.1.80.3.3.2.1 | TablefpLFSTable | not-accessible | mandatory | Table for FP File System Services Statistics for each FSP on the system. |
| 1.3.6.1.4.1.80.3.3.2.1.1 | RowfpLFSEntry | not-accessible | mandatory | An entry for each FSP in the system. |
| 1.3.6.1.4.1.80.3.3.2.1.1.1 | ColumnfpLFSVersion | read-only | mandatory | FP file system services statistics version. |
| 1.3.6.1.4.1.80.3.3.2.1.1.2 | ColumnfpLFSMounts | read-only | mandatory | FP file system services - FC-MOUNT - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.3 | ColumnfpLFSUMounts | read-only | mandatory | FP file system services - FC-UMOUNT - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.4 | ColumnfpLFSReads | read-only | mandatory | FP file system services - FC-READ - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.5 | ColumnfpLFSWrites | read-only | mandatory | FP file system services - FC-WRITE - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.6 | ColumnfpLFSReaddirs | read-only | mandatory | FP file system services - FC-READDIR - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.7 | ColumnfpLFSReadlinks | read-only | mandatory | FP file system services - FC-READLINK - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.8 | ColumnfpLFSMkdirs | read-only | mandatory | FP file system services - FC-MKDIR - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.9 | ColumnfpLFSMknods | read-only | mandatory | FP file system services - FC-MKNOD - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.10 | ColumnfpLFSReaddirPluses | read-only | mandatory | FP file system services - FC-READDIR-PLUS - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.11 | ColumnfpLFSFsstats | read-only | mandatory | FP file system services - FC-FSSTAT - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.12 | ColumnfpLFSNull | read-only | mandatory | FP file system services - FC-NULL - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.13 | ColumnfpLFSFsinfo | read-only | mandatory | FP file system services - FC-FSINFO - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.14 | ColumnfpLFSGetattrs | read-only | mandatory | FP file system services - FC-GETATTR - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.15 | ColumnfpLFSSetattrs | read-only | mandatory | FP file system services - FC-SETATTR - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.16 | ColumnfpLFSLookups | read-only | mandatory | FP file system services - FC-LOOKUP - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.17 | ColumnfpLFSCreates | read-only | mandatory | FP file system services - FC-CREATE - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.18 | ColumnfpLFSRemoves | read-only | mandatory | FP file system services - FC-REMOVE - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.19 | ColumnfpLFSRenames | read-only | mandatory | FP file system services - FC-RENAME - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.20 | ColumnfpLFSLinks | read-only | mandatory | FP file system services - FC-LINK - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.21 | ColumnfpLFSSymlinks | read-only | mandatory | FP file system services - FC-SYMLINK - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.22 | ColumnfpLFSRmdirs | read-only | mandatory | FP file system services - FC-RMDIR - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.23 | ColumnfpLFSCkpntons | read-only | mandatory | FP file system services - FC-CKPNTON - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.24 | ColumnfpLFSCkpntoffs | read-only | mandatory | FP file system services - FC-CKPNTOFFS - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.25 | ColumnfpLFSClears | read-only | mandatory | FP file system services - FC-CLEAR - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.26 | ColumnfpLFSIsolateFs | read-only | mandatory | FP file system services - FC-ISOLATE-FS - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.27 | ColumnfpLFSReleaseFs | read-only | mandatory | FP file system services - FC-RELEASE-FS - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.28 | ColumnfpLFSIsolationStates | read-only | mandatory | FP file system services - FC-ISOLATION-STATE - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.29 | ColumnfpLFSDiagnostics | read-only | mandatory | FP file system services - FC-DIAGNOSTIC - Counter. |
| 1.3.6.1.4.1.80.3.3.2.1.1.30 | ColumnfpLFSPurges | read-only | mandatory | FP file system services - FC-PURGE - Counter. |
| 1.3.6.1.4.1.80.3.3.2.2 | TablefpFileSystemTable | not-accessible | mandatory | Table containg File systems on each FSP |
| 1.3.6.1.4.1.80.3.3.2.2.1 | RowfpFSEntry | not-accessible | mandatory | Entry for each File System |
| 1.3.6.1.4.1.80.3.3.2.2.1.1 | ColumnfpFSIndex | read-only | mandatory | Uniquely identifies each FS on FSP |
| 1.3.6.1.4.1.80.3.3.2.2.1.2 | ColumnfpHrFSIndex | read-only | mandatory | Index of the corresponding FS entry in host resource mib |
| 1.3.6.1.4.1.80.3.3.2.3 | NodefpHTFS | |||
| 1.3.6.1.4.1.80.3.3.2.3.1 | TablefpDNLCTStatTable | not-accessible | mandatory | DNLC is part of StackOS module. This table displays DNLC Statistics. |
| 1.3.6.1.4.1.80.3.3.2.3.1.1 | RowfpDNLCSEntry | not-accessible | mandatory | Each entry for a FSP board. |
| 1.3.6.1.4.1.80.3.3.2.3.1.1.1 | ColumnfpDNLCHit | read-only | mandatory | DNLC hit on a given FSP. |
| 1.3.6.1.4.1.80.3.3.2.3.1.1.2 | ColumnfpDNLCMiss | read-only | mandatory | DNLC miss on a given FSP. |
| 1.3.6.1.4.1.80.3.3.2.3.1.1.3 | ColumnfpDNLCEnter | read-only | mandatory | Number of DNLC entries made (total). |
| 1.3.6.1.4.1.80.3.3.2.3.1.1.4 | ColumnfpDNLCConflict | read-only | mandatory | Times entry found in DNLC on dnlc-enter. |
| 1.3.6.1.4.1.80.3.3.2.3.1.1.5 | ColumnfpDNLCPurgevfsp | read-only | mandatory | Entries purged based on vfsp. |
| 1.3.6.1.4.1.80.3.3.2.3.1.1.6 | ColumnfpDNLCPurgevp | read-only | mandatory | Entries purge based on vp. |
| 1.3.6.1.4.1.80.3.3.2.3.1.1.7 | ColumnfpDNLCHashsz | read-only | mandatory | Number of hash buckets in dnlc hash table. |
| 1.3.6.1.4.1.80.3.3.2.3.2 | TablefpPageStatTable | not-accessible | mandatory | Page is part of StackOS module. This table gives the Page Statistics for all FSPs. |
| 1.3.6.1.4.1.80.3.3.2.3.2.1 | RowfpPageEntry | not-accessible | mandatory | Each Entry in the table displays Page Statistics for a FSP. |
| 1.3.6.1.4.1.80.3.3.2.3.2.1.1 | ColumnfpPAGETotalmem | read-only | mandatory | Allocated memory for pages. |
| 1.3.6.1.4.1.80.3.3.2.3.2.1.2 | ColumnfpPAGEFreelistcnt | read-only | mandatory | Pages on freelist. |
| 1.3.6.1.4.1.80.3.3.2.3.2.1.3 | ColumnfpPAGECachelistcnt | read-only | mandatory | Pages on cachelist. |
| 1.3.6.1.4.1.80.3.3.2.3.2.1.4 | ColumnfpPAGEDirtyflistcnt | read-only | mandatory | Pages on dirtyflist. |
| 1.3.6.1.4.1.80.3.3.2.3.2.1.5 | ColumnfpPAGEDirtydlistcnt | read-only | mandatory | Pages on dirtydlist |
| 1.3.6.1.4.1.80.3.3.2.3.2.1.6 | ColumnfpPAGECachehit | read-only | mandatory | Page cache hit. |
| 1.3.6.1.4.1.80.3.3.2.3.2.1.7 | ColumnfpPAGECachemiss | read-only | mandatory | Page cache miss. |
| 1.3.6.1.4.1.80.3.3.2.3.2.1.8 | ColumnfpPAGEWritehit | read-only | mandatory | Page cache write hit. |
| 1.3.6.1.4.1.80.3.3.2.3.2.1.9 | ColumnfpPAGEWritemiss | read-only | mandatory | Page cache write miss. |
| 1.3.6.1.4.1.80.3.3.2.3.2.1.10 | ColumnfpPAGEZcref | read-only | mandatory | Page Zref. |
| 1.3.6.1.4.1.80.3.3.2.3.2.1.11 | ColumnfpPAGEZcbreak | read-only | mandatory | Page Zbreak. |
| 1.3.6.1.4.1.80.3.3.2.3.2.1.12 | ColumnfpPAGEOutscan | read-only | mandatory | Page out scan. |
| 1.3.6.1.4.1.80.3.3.2.3.2.1.13 | ColumnfpPAGEOutputpage | read-only | mandatory | Output Page. |
| 1.3.6.1.4.1.80.3.3.2.3.2.1.14 | ColumnfpPAGEFsflushscan | read-only | mandatory | Flush scan. |
| 1.3.6.1.4.1.80.3.3.2.3.2.1.15 | ColumnfpPAGEFsflushputpage | read-only | mandatory | Flush output page. |
| 1.3.6.1.4.1.80.3.3.2.3.2.1.16 | ColumnfpPAGEOutcnt | read-only | mandatory | Page out count. |
| 1.3.6.1.4.1.80.3.3.2.3.3 | TablefpBufferStatTable | not-accessible | mandatory | BufferIO is one of the modules present in StackOS. This table displays the bufferIO statistics for all FSPs. |
| 1.3.6.1.4.1.80.3.3.2.3.3.1 | RowfpBufferEntry | not-accessible | mandatory | Each entry in the table for a single FSP. |
| 1.3.6.1.4.1.80.3.3.2.3.3.1.1 | ColumnfpBUFLreads | read-only | mandatory | Number of buffered reads. |
| 1.3.6.1.4.1.80.3.3.2.3.3.1.2 | ColumnfpBUFBreads | read-only | mandatory | Number of breads doing sp-read. |
| 1.3.6.1.4.1.80.3.3.2.3.3.1.3 | ColumnfpBUFLwrites | read-only | mandatory | Number of buffered writes (incl. delayed). |
| 1.3.6.1.4.1.80.3.3.2.3.3.1.4 | ColumnfpBUFBwrites | read-only | mandatory | Number of bwrites doing sp-write. |
| 1.3.6.1.4.1.80.3.3.2.3.3.1.5 | ColumnfpBUFIOwaits | read-only | mandatory | Number of processes blocked in biowait. |
| 1.3.6.1.4.1.80.3.3.2.3.3.1.6 | ColumnfpBUFResid | read-only | mandatory | Running total of unused buf memory. |
| 1.3.6.1.4.1.80.3.3.2.3.3.1.7 | ColumnfpBUFBufsize | read-only | mandatory | Running total of memory on free list. |
| 1.3.6.1.4.1.80.3.3.2.3.3.1.8 | ColumnfpBUFBcount | read-only | mandatory | Running total of memory on hash lists. |
| 1.3.6.1.4.1.80.3.3.2.3.4 | TablefpInodeTable | not-accessible | mandatory | Inode table displays the Inode Statistics for all FSPs. Inode is part of StackOS module. |
| 1.3.6.1.4.1.80.3.3.2.3.4.1 | RowfpInodeEntry | not-accessible | mandatory | Each entry in the table displays Inode Statistics for a FSP. |
| 1.3.6.1.4.1.80.3.3.2.3.4.1.1 | ColumnfpINODEIgetcalls | read-only | mandatory | Number of calls to htfs-iget. |
| 1.3.6.1.4.1.80.3.3.2.3.4.1.2 | ColumnfpFoundinodes | read-only | mandatory | Inode cache hits. |
| 1.3.6.1.4.1.80.3.3.2.3.4.1.3 | ColumnfpTotalinodes | read-only | mandatory | Total number of inodes in memory. |
| 1.3.6.1.4.1.80.3.3.2.3.4.1.4 | ColumnfpGoneinodes | read-only | mandatory | Number of inodes on gone list. |
| 1.3.6.1.4.1.80.3.3.2.3.4.1.5 | ColumnfpFreeinodes | read-only | mandatory | Number of inodes on free list. |
| 1.3.6.1.4.1.80.3.3.2.3.4.1.6 | ColumnfpCacheinodes | read-only | mandatory | Number of inodes on cache list. |
| 1.3.6.1.4.1.80.3.3.2.3.4.1.7 | ColumnfpSyncinodes | read-only | mandatory | Number of inodes on sync list. |
| 1.3.6.1.4.1.80.3.3.3 | NodeaxSP | |||
| 1.3.6.1.4.1.80.3.3.3.2 | NodespRaid | |||
| 1.3.6.1.4.1.80.3.3.4 | NodeaxFab | |||
| 1.3.6.1.4.1.80.3.3.4.1 | TablefabAdptTable | not-accessible | mandatory | Table containing information for all fibre channel adapters information on the Auspex IO node |
| 1.3.6.1.4.1.80.3.3.4.1.1 | RowfabAdptEntry | not-accessible | mandatory | Entry for each fibre channel adapter |
| 1.3.6.1.4.1.80.3.3.4.1.1.1 | ColumnfabIndex | read-only | mandatory | Fabric adapter index |
| 1.3.6.1.4.1.80.3.3.4.1.1.2 | ColumnfabPCIBusNum | read-only | mandatory | Fabric adapter PCI BUS number |
| 1.3.6.1.4.1.80.3.3.4.1.1.3 | ColumnfabSlotNum | read-only | mandatory | Fabric adapter Slot number |
| 1.3.6.1.4.1.80.3.3.4.1.1.4 | ColumnfabIntLine | read-only | mandatory | Fabric adapter Interrupt line |
| 1.3.6.1.4.1.80.3.3.4.1.1.5 | ColumnfabIntPin | read-only | mandatory | Fabric adapter Interrupt pin |
| 1.3.6.1.4.1.80.3.3.4.1.1.6 | ColumnfabType | read-only | mandatory | Fabric adapter Type |
| 1.3.6.1.4.1.80.3.3.4.1.1.7 | ColumnfabVendorId | read-only | mandatory | Fabric adapter Vendor ID |
| 1.3.6.1.4.1.80.3.3.4.1.1.8 | ColumnfabDeviceId | read-only | mandatory | Fabric adapter Device ID |
| 1.3.6.1.4.1.80.3.3.4.1.1.9 | ColumnfabRevisionId | read-only | mandatory | Fabric adapter Revision ID |
| 1.3.6.1.4.1.80.3.3.4.1.1.10 | ColumnfabWWN | read-only | mandatory | Fabric adapter World Wide Number |
| 1.3.6.1.4.1.80.3.3.4.1.1.11 | ColumnfabNumOfTargets | read-only | mandatory | Number of targets found for the adapter |
| 1.3.6.1.4.1.80.3.3.4.1.1.12 | ColumnfabAdptNumber | read-only | mandatory | Fabric adapter Number |
| 1.3.6.1.4.1.80.3.3.4.2 | TablefabTargetTable | not-accessible | mandatory | Table containing information for all fibre channel adapters information on the Auspex IO node |
| 1.3.6.1.4.1.80.3.3.4.2.1 | RowfabTargetEntry | not-accessible | mandatory | Entry for each fibre channel adapter |
| 1.3.6.1.4.1.80.3.3.4.2.1.1 | ColumnfabTargetIndex | read-only | mandatory | The Fabric target adapter index |
| 1.3.6.1.4.1.80.3.3.4.2.1.2 | ColumnfabTargetAdapterNum | read-only | mandatory | The fabric target Adapter number |
| 1.3.6.1.4.1.80.3.3.4.2.1.3 | ColumnfabTargetNumber | read-only | mandatory | The fabric target number |
| 1.3.6.1.4.1.80.3.3.4.2.1.4 | ColumnfabTargetWWN | read-only | mandatory | The fabric target WWN number |
| 1.3.6.1.4.1.80.3.3.4.2.1.5 | ColumnfabTargetPortWWN | read-only | mandatory | The fabric target Port WWN number |
| 1.3.6.1.4.1.80.3.3.4.2.1.6 | ColumnfabTargetAliasName | read-only | mandatory | The fabric target Alias Name |
| 1.3.6.1.4.1.80.3.3.4.2.1.7 | ColumnfabTargetType | read-only | mandatory | The fabric target Type disk - other |
| 1.3.6.1.4.1.80.3.3.4.2.1.8 | ColumnfabTargetNumOfLuns | read-only | mandatory | The number of luns on the target |
| 1.3.6.1.4.1.80.3.3.4.3 | TablefabLunTable | not-accessible | mandatory | Table containing information for all Luns |
| 1.3.6.1.4.1.80.3.3.4.3.1 | RowfabLunEntry | not-accessible | mandatory | Entry for each Lun |
| 1.3.6.1.4.1.80.3.3.4.3.1.1 | ColumnfabLunIndex | read-only | mandatory | Unique Lun identifier |
| 1.3.6.1.4.1.80.3.3.4.3.1.2 | ColumnfabLunNumber | read-only | mandatory | Lun Number |
| 1.3.6.1.4.1.80.3.3.4.3.1.3 | ColumnfabLunAdptNumber | read-only | mandatory | The adapter number for the lun |
| 1.3.6.1.4.1.80.3.3.4.3.1.4 | ColumnfabLunTarNumber | read-only | mandatory | The Target number for the lun |
| 1.3.6.1.4.1.80.3.3.4.3.1.5 | ColumnfabLunWWN | read-only | mandatory | The worldwide number for the lun |
| 1.3.6.1.4.1.80.3.3.4.3.1.6 | ColumnfabLunType | read-only | mandatory | The type of the lun |
| 1.3.6.1.4.1.80.3.3.4.3.1.7 | ColumnfabLunSize | read-only | mandatory | The size of the lun |
| 1.3.6.1.4.1.80.3.3.4.3.1.8 | ColumnfabLunMap | read-only | mandatory | Identifier for the lun mapping |
| 1.3.6.1.4.1.80.3.3.4.4 | TablefabLunMapTable | not-accessible | mandatory | Table containing mapping information for all Luns |
| 1.3.6.1.4.1.80.3.3.4.4.1 | RowfabLunMapEntry | not-accessible | mandatory | Entry for each mapped Lun |
| 1.3.6.1.4.1.80.3.3.4.4.1.1 | ColumnfabLunMapIndex | read-only | mandatory | Unique Mapped Lun identifier |
| 1.3.6.1.4.1.80.3.3.4.4.1.2 | ColumnfabLunMNumber | read-only | mandatory | Mapped Lun Number |
| 1.3.6.1.4.1.80.3.3.4.4.1.3 | ColumnfabLunAlias | read-only | mandatory | The Alias name associated with the lun |
| 1.3.6.1.4.1.80.3.3.4.4.1.4 | ColumnfabLunMapWWN | read-only | mandatory | The WWN associated with the lun |
| 1.3.6.1.4.1.80.3.3.4.4.1.5 | ColumnfabLunLabel | read-only | mandatory | The label of the lun |
| 1.3.6.1.4.1.80.3.3.4.5 | NodefabRaid | |||
| 1.3.6.1.4.1.80.3.3.4.5.1 | TablefabLogDevTable | not-accessible | mandatory | This table contains information for logical devices. |
| 1.3.6.1.4.1.80.3.3.4.5.1.1 | RowfabLogDevEntry | not-accessible | mandatory | Entry for each logical device |
| 1.3.6.1.4.1.80.3.3.4.5.1.1.1 | ColumnldIndex | read-only | mandatory | Index of the logical device |
| 1.3.6.1.4.1.80.3.3.4.5.1.1.2 | ColumnldSectorReads | read-only | mandatory | Number of sectors read |
| 1.3.6.1.4.1.80.3.3.4.5.1.1.3 | ColumnldWBufReads | read-only | mandatory | Number of sectors read from WBUF |
| 1.3.6.1.4.1.80.3.3.4.5.1.1.4 | ColumnldSectorWrites | read-only | mandatory | Number of sector writes |
| 1.3.6.1.4.1.80.3.3.4.5.1.1.5 | ColumnldReadIO | read-only | mandatory | Number of read IO's |
| 1.3.6.1.4.1.80.3.3.4.5.1.1.6 | ColumnldWriteIO | read-only | mandatory | Number of write IO's |
| 1.3.6.1.4.1.80.3.3.4.5.1.1.7 | ColumnldMediaErrors | read-only | mandatory | Number of media errors |
| 1.3.6.1.4.1.80.3.3.4.5.1.1.8 | ColumnldDriveErrors | read-only | mandatory | Number of drive errors |
| 1.3.6.1.4.1.80.3.3.4.5.1.1.9 | ColumnldTotalTime | read-only | mandatory | Total time for the logical device |
| 1.3.6.1.4.1.80.3.4 | NodeaxTrapData | |||
| 1.3.6.1.4.1.80.3.4.1 | NodetrapFSFull | |||
| 1.3.6.1.4.1.80.3.4.1.1 | ScalartrapFSFullMsg | read-only | mandatory | Name of the file system which got full and for which fileSystemFull trap has to be sent. |
| 1.3.6.1.4.1.80.3.4.1.2 | ScalartrapFSFullTimeStamp | read-only | mandatory | Time at which file system identified by trapFSFullMsg got full. |
| 1.3.6.1.4.1.80.3.4.2 | NodetrapFSDegradation | |||
| 1.3.6.1.4.1.80.3.4.2.1 | ScalartrapFSDegradationMsg | read-only | mandatory | Name of the file system which got degraded and for which fileSystemDegradation trap has to be sent. |
| 1.3.6.1.4.1.80.3.4.2.2 | ScalartrapFSDegradationTimeStamp | read-only | mandatory | Time at which file system identified by trapFSDegradationMsg got degraded. |
| 1.3.6.1.4.1.80.3.4.3 | NodetrapDiskUpdation | |||
| 1.3.6.1.4.1.80.3.4.3.1 | ScalartrapDiskMsg | read-only | mandatory | Name of the disk which got removed from the system and for which diskStackUpdation trap has to be sent. |
| 1.3.6.1.4.1.80.3.4.3.2 | ScalartrapDiskTimeStamp | read-only | mandatory | Time at which disk identified by trapDiskIndex was added/removed. |
| 1.3.6.1.4.1.80.3.4.4 | NodetrapFCAdptLinkFailure | |||
| 1.3.6.1.4.1.80.3.4.4.1 | ScalartrapFCAdptLinkFailureMsg | read-only | mandatory | Name of the fibre channel adapter on which link failure occured. |
| 1.3.6.1.4.1.80.3.4.4.2 | ScalartrapFCAdptLinkFailureTimeStamp | read-only | mandatory | Time at which the fibre channel adapter link failure occured. |
| 1.3.6.1.4.1.80.3.4.5 | NodetrapFCAdptLinkUp | |||
| 1.3.6.1.4.1.80.3.4.5.1 | ScalartrapFCAdptLinkUpMsg | read-only | mandatory | Name of the fibre channel adapter on which link up occured. |
| 1.3.6.1.4.1.80.3.4.5.2 | ScalartrapFCAdptLinkUpTimeStamp | read-only | mandatory | Time at which the fibre channel adapter link up occured. |
| 1.3.6.1.4.1.80.3.4.6 | NodetrapFCLossOfLinkFailure | |||
| 1.3.6.1.4.1.80.3.4.6.1 | ScalartrapFCLossOfLinkFailureMsg | read-only | mandatory | Name of the SD device which had complete loss of link. |
| 1.3.6.1.4.1.80.3.4.6.2 | ScalartrapFCLossOfLinkFailureTimeStamp | read-only | mandatory | Time at which complete loss of link occured. |
| 1.3.6.1.4.1.80.3.4.7 | NodetrapLunDisappear | |||
| 1.3.6.1.4.1.80.3.4.7.1 | ScalartrapLunDisappearMsg | read-only | mandatory | Mapped lun which disappeared |
| 1.3.6.1.4.1.80.3.4.7.2 | ScalartrapLunDisappearTimeStamp | read-only | mandatory | Time at which mapped lun disappeared |
| 1.3.6.1.4.1.80.3.4.8 | NodetrapLunSizeChange | |||
| 1.3.6.1.4.1.80.3.4.8.1 | ScalartrapLunSizeChangeMsg | read-only | mandatory | Mapped lun whose lun size changed |
| 1.3.6.1.4.1.80.3.4.8.2 | ScalartrapLunSizeChangeTimeStamp | read-only | mandatory | Time at which mapped lun size changed |
| 1.3.6.1.4.1.80.4 | NodefcLinkFailureTrap | Trap indicating that a adapter link failure occured. | ||
| 1.3.6.1.4.1.80.5 | NodefcLinkUpTrap | Trap indicating that a adapter link up occured. | ||
| 1.3.6.1.4.1.80.6 | NodefcCompleteLossTrap | Trap indicating that complete loss of link occured. | ||
| 1.3.6.1.4.1.80.7 | NodelunDisappearTrap | Trap indicating that a mapped lun disappeared. | ||
| 1.3.6.1.4.1.80.8 | NodelunSizeChangeTrap | Trap indicating that lun size change occured on a mapped lun. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Boolean | INTEGER { true(1), false(2) } | ||
| BusType | INTEGER { eisa(1), mca(2), pci(3), vesa(4), isa(5), scsi(6) } | current | Defines Bus type. |
| ControllerType | INTEGER { dac960E(1), dac960M(8), dac960PD(16), dac960PL(17), dac960PDU(18), dac960PE(19), dac960PG(20), dac960PJ(21), dac960PTL(22), dac960PR(23), dac960PRL(24), dac960PT(25), dac1164P(26), dacI20(80), dac960S(96), dac960SU(97), dac960SX(98), dac960SF(99), dac960FL(100), hba440(129), hba440C(130), hba445(131), hba445C(132), hba440xC(133), hba445S(134), hba640(136), hba640A(137), hba446(138), hba446D(139), hba446S(140), hba742(144), hba742A(145), hba747(146), hba747D(147), hba747S(148), hba74xC(149), hba757(150), hba757D(151), hba757S(152), hba757CD(153), hba75xC(154), hba747C(155), hba757C(156), hba540(160), hba540C(161), hba542(162), hba542B(163), hba542C(164), hba542D(165), hba545(166), hba545C(167), hba545S(168), hba54xC(169), hba946(176), hba946C(177), hba948(178), hba948C(179), hba956(180), hba956C(181), hba958(182), hba958C(183), hba958D(184), hba956CD(185), hba958CD(186), hba930(192), hba932(193), hba950(194), hba952(195) } | current | This textual Convention defines the type of Controller. |
| DateAndTime | OCTET STRING (SIZE (8 | 11)) | ||
| InternationalDisplayString | OCTET STRING | ||
| KBytes | INTEGER (0..2147483647) | ||
| ProductID | OBJECT IDENTIFIER | ||
| RaidLevel | INTEGER { raid0(0), raid1(1), raid3(3), raid5(5), raid6(6), raid7(7) } | current | Defines the type of Raid Level present in the system |
| RebuildFlag | INTEGER { none(0), autorebuild(1), manualrebuild(2), check(3), expandcapacity(4), phydevfailed(240), logdevfailed(241), justfailed(242), canceled(243), expandcapacityfailed(244), autorebuildfailed(255) } | current | Defines the Rebuild Flag type. |
| U08Bits | INTEGER (0..255) | current | Integer type of range 0..255 |
| U16Bits | INTEGER (0..65535) | current | Integer type of range 0..65535 |
| VendorName | INTEGER { mylex(0), ibm(1), hp(2), dec(3), att(4), dell(5), nec(6), sni(7), ncr(8) } | current | Name of the Vendors |