MIB Viewer

Search, upload, browse, or download from a database of over 11,000 SNMP MIBs. MIB Viewer lets you look up any MIB object by name, OID, or number, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

NEWTEC-ETHERNET-MIB

85 objects

Newtec modular ethernet interface MIB containing definitions for management and ethernet interface functionality.

Imported Objects

NEWTEC-MAIN-MIB	ntcFunction
NEWTEC-TC-MIB	NtcAlarmState NtcEnable
SNMPv2-CONF	MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI	Counter32 Counter64 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC	MacAddress

OID	Name	Access	Status	Description
1.3.6.1.4.1.5835.5.2.500	IdentityntcEthernet			Newtec modular ethernet interface MIB containing definitions for management and ethernet interface functionality.
1.3.6.1.4.1.5835.5.2.500.1	IdentityntcEtherObjects		current	Container holding ntcEtherObjects definitions.
1.3.6.1.4.1.5835.5.2.500.1.1	TablentcEtherLinkMgmtTable	not-accessible	current	A table containing the ntcEtherLinkMgmt
1.3.6.1.4.1.5835.5.2.500.1.1.1	RowntcEtherLinkMgmtEntry	not-accessible	current	A conceptual row of the ntcEtherLinkMgmtTable.
1.3.6.1.4.1.5835.5.2.500.1.1.1.1	ColumnntcEtherLinkMgmtInterface	not-accessible	current	The name of Management Ethernet interface
1.3.6.1.4.1.5835.5.2.500.1.1.1.2	ColumnntcEtherLinkMgmtEnable	read-write	current	Enable or disable the corresponding Ethernet interface.
1.3.6.1.4.1.5835.5.2.500.1.1.1.3	ColumnntcEtherLinkMgmtMacAddress	read-only	current	MAC address of an Ethernet interface.
1.3.6.1.4.1.5835.5.2.500.1.1.1.4	ColumnntcEtherLinkMgmtAutoNegotiation	read-write	current	Enable or disable autonegotiation. AutoNegotiation is a procedure where two connected devices choose the same Ethernet transmission parameters (Speed, duplex/s…
1.3.6.1.4.1.5835.5.2.500.1.1.1.5	ColumnntcEtherLinkMgmtAdvertisedSpeeds	read-write	current	Configure the advertised speeds during autonegotiation.
1.3.6.1.4.1.5835.5.2.500.1.1.1.6	ColumnntcEtherLinkMgmtForcedSpeed	read-write	current	Configure forced speed with disabled autonegotation.
1.3.6.1.4.1.5835.5.2.500.1.1.1.7	ColumnntcEtherLinkMgmtLinkState	read-only	current	Indicates the link state of the Ethernet interface.
1.3.6.1.4.1.5835.5.2.500.1.1.1.8	ColumnntcEtherLinkMgmtMtu	read-write	current	Configuration of the MTU of the interface.
1.3.6.1.4.1.5835.5.2.500.1.2	TablentcEtherLinkDataTable	not-accessible	current	A table containing the ntcEtherLinkData
1.3.6.1.4.1.5835.5.2.500.1.2.1	RowntcEtherLinkDataEntry	not-accessible	current	A conceptual row of the ntcEtherLinkDataTable.
1.3.6.1.4.1.5835.5.2.500.1.2.1.1	ColumnntcEtherLinkDataInterface	not-accessible	current	The name of a Data Ethernet Interface
1.3.6.1.4.1.5835.5.2.500.1.2.1.2	ColumnntcEtherLinkDataEnable	read-write	current	Enable or disable the corresponding Ethernet interface.
1.3.6.1.4.1.5835.5.2.500.1.2.1.3	ColumnntcEtherLinkDataMacAddress	read-only	current	MAC address of an Ethernet interface.
1.3.6.1.4.1.5835.5.2.500.1.2.1.4	ColumnntcEtherLinkDataAutoNegotiation	read-write	current	Enable or disable autonegotiation. AutoNegotiation is a procedure where two connected devices choose the same Ethernet transmission parameters (Speed, duplex/s…
1.3.6.1.4.1.5835.5.2.500.1.2.1.5	ColumnntcEtherLinkDataAdvertisedSpeeds	read-write	current	Configure the advertised speeds during autonegotiation.
1.3.6.1.4.1.5835.5.2.500.1.2.1.6	ColumnntcEtherLinkDataForcedSpeed	read-write	current	Configure forced speed with disabled autonegotation.
1.3.6.1.4.1.5835.5.2.500.1.2.1.7	ColumnntcEtherLinkDataLinkState	read-only	current	Indicates the link state of the Ethernet interface.
1.3.6.1.4.1.5835.5.2.500.1.2.1.8	ColumnntcEtherLinkDataMtu	read-write	current	Configuration of the MTU of the interface.
1.3.6.1.4.1.5835.5.2.500.1.3	TablentcEtherStatMgmtTable	not-accessible	current	A table containing the ntcEtherStatMgmt
1.3.6.1.4.1.5835.5.2.500.1.3.1	RowntcEtherStatMgmtEntry	not-accessible	current	A conceptual row of the ntcEtherStatMgmtTable.
1.3.6.1.4.1.5835.5.2.500.1.3.1.1	ColumnntcEtherStatMgmtInterface	not-accessible	current	The name of a Management Ethernet Interface
1.3.6.1.4.1.5835.5.2.500.1.3.1.2	ColumnntcEtherStatMgmtInputBytes	read-only	current	Ethernet input byte counter.
1.3.6.1.4.1.5835.5.2.500.1.3.1.3	ColumnntcEtherStatMgmtInputPackets	read-only	current	Ethernet input packet counter.
1.3.6.1.4.1.5835.5.2.500.1.3.1.4	ColumnntcEtherStatMgmtInputDropped	read-only	current	Indicates the number of dropped packets at input.
1.3.6.1.4.1.5835.5.2.500.1.3.1.5	ColumnntcEtherStatMgmtOutputBytes	read-only	current	Indicates the number of available bytes on the output.
1.3.6.1.4.1.5835.5.2.500.1.3.1.6	ColumnntcEtherStatMgmtOutputPackets	read-only	current	Ethernet output packet counter
1.3.6.1.4.1.5835.5.2.500.1.3.1.7	ColumnntcEtherStatMgmtOutputDropped	read-only	current	Ethernet output packets dropped counter
1.3.6.1.4.1.5835.5.2.500.1.3.1.8	ColumnntcEtherStatMgmtInputErrors	read-only	current	Indicates the number of error packets at input.
1.3.6.1.4.1.5835.5.2.500.1.3.1.9	ColumnntcEtherStatMgmtOutputerrors	read-only	current	Indicates the number of error packets at output.
1.3.6.1.4.1.5835.5.2.500.1.4	TablentcEtherStatDataTable	not-accessible	current	A table containing the ntcEtherStatData
1.3.6.1.4.1.5835.5.2.500.1.4.1	RowntcEtherStatDataEntry	not-accessible	current	A conceptual row of the ntcEtherStatDataTable.
1.3.6.1.4.1.5835.5.2.500.1.4.1.1	ColumnntcEtherStatDataInterface	not-accessible	current	The name of a Data Ethernet interface
1.3.6.1.4.1.5835.5.2.500.1.4.1.2	ColumnntcEtherStatDataInputBytes	read-only	current	Ethernet input byte counter.
1.3.6.1.4.1.5835.5.2.500.1.4.1.3	ColumnntcEtherStatDataInputPackets	read-only	current	Ethernet input packet counter.
1.3.6.1.4.1.5835.5.2.500.1.4.1.4	ColumnntcEtherStatDataInputDropped	read-only	current	Indicates the number of dropped packets at input.
1.3.6.1.4.1.5835.5.2.500.1.4.1.5	ColumnntcEtherStatDataOutputBytes	read-only	current	Indicates the number of available bytes on the output.
1.3.6.1.4.1.5835.5.2.500.1.4.1.6	ColumnntcEtherStatDataOutputPackets	read-only	current	Ethernet output packet counter
1.3.6.1.4.1.5835.5.2.500.1.4.1.7	ColumnntcEtherStatDataOutputDropped	read-only	current	Ethernet output packets dropped counter
1.3.6.1.4.1.5835.5.2.500.1.4.1.8	ColumnntcEtherStatDataInputErrors	read-only	current	Indicates the number of error packets at input.
1.3.6.1.4.1.5835.5.2.500.1.4.1.9	ColumnntcEtherStatDataOutputerrors	read-only	current	Indicates the number of error packets at output.
1.3.6.1.4.1.5835.5.2.500.1.5	IdentityntcEtherInterfaceRedundancy		current	Container holding ntcEtherInterfaceRedundancy definitions.
1.3.6.1.4.1.5835.5.2.500.1.5.1	IdentityntcEtherIfRedMgmt		current	Container holding ntcEtherIfRedMgmt definitions.
1.3.6.1.4.1.5835.5.2.500.1.5.1.1	ScalarntcEtherIfRedMgmtSwitchOrder	read-write	current	Configuration of the management interface link redundancy.
1.3.6.1.4.1.5835.5.2.500.1.5.1.2	ScalarntcEtherIfRedMgmtSwitchCount	read-only	current	Counts the number of times the device switched to another Ethernet data interface.
1.3.6.1.4.1.5835.5.2.500.1.5.1.3	ScalarntcEtherIfRedMgmtActiveInterface	read-only	current	Displays the active interface of the MGMT redundancy group.
1.3.6.1.4.1.5835.5.2.500.1.5.2	IdentityntcEtherIfRedData		current	Container holding ntcEtherIfRedData definitions.
1.3.6.1.4.1.5835.5.2.500.1.5.2.1	ScalarntcEtherIfRedDataSwitchOrder	read-write	current	Configure the data interface link redundancy.
1.3.6.1.4.1.5835.5.2.500.1.5.2.2	ScalarntcEtherIfRedDataSwitchCount	read-only	current	Counts the number of times the device switched to another Ethernet data interface.
1.3.6.1.4.1.5835.5.2.500.1.5.2.3	ScalarntcEtherIfRedDataActiveInterface	read-only	current	Displays the active interface of the Data redundancy group
1.3.6.1.4.1.5835.5.2.500.1.5.2.4	ScalarntcEtherIfRedDataGwUnreachImpact	read-write	current	Configure the impact of a Gateway Unreachable alarm on link redundancy. We recommend that the gateway is reachable via both links, so you can keep the default …
1.3.6.1.4.1.5835.5.2.500.1.5.3	IdentityntcEtherIfRedSat		current	Container holding ntcEtherIfRedSat definitions.
1.3.6.1.4.1.5835.5.2.500.1.5.3.1	ScalarntcEtherIfRedSatSwitchOrder	read-write	current	Configure the sat interface link redundancy.
1.3.6.1.4.1.5835.5.2.500.1.5.3.2	ScalarntcEtherIfRedSatSwitchCount	read-only	current	Counts the number of times the device switched to another Ethernet sat interface.
1.3.6.1.4.1.5835.5.2.500.1.5.3.3	ScalarntcEtherIfRedSatActiveInterface	read-only	current	Displays the active interface of the Sat redundancy group
1.3.6.1.4.1.5835.5.2.500.1.6	IdentityntcEtherAlarm		current	Container holding ntcEtherAlarm definitions.
1.3.6.1.4.1.5835.5.2.500.1.6.1	ScalarntcEtherAlmMgmt1EthLinkFail	read-only	current	This alarm is raised when there is no signal on the corresponding Ethernet interface. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.500.1.6.2	ScalarntcEtherAlmMgmt1EthHalfDuplex	read-only	current	This alarm is raised when an Ethernet interface is in half duplex mode as a result of a link negotiation. The alarm is not raised when the Ethernet interface w…
1.3.6.1.4.1.5835.5.2.500.1.6.3	ScalarntcEtherAlmMgmt2EthLinkFail	read-only	current	This alarm is raised when there is no signal on the corresponding Ethernet interface. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.500.1.6.4	ScalarntcEtherAlmMgmt2EthHalfDuplex	read-only	current	This alarm is raised when an Ethernet interface is in half duplex mode as a result of a link negotiation. The alarm is not raised when the Ethernet interface w…
1.3.6.1.4.1.5835.5.2.500.1.6.5	ScalarntcEtherAlmData1EthLinkFail	read-only	current	This alarm is raised when there is no signal on the corresponding Ethernet interface. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.500.1.6.6	ScalarntcEtherAlmData1EthHalfDuplex	read-only	current	This alarm is raised when an Ethernet interface is in half duplex mode as a result of a link negotiation. The alarm is not raised when the Ethernet interface w…
1.3.6.1.4.1.5835.5.2.500.1.6.7	ScalarntcEtherAlmData2EthLinkFail	read-only	current	This alarm is raised when there is no signal on the corresponding Ethernet interface. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.500.1.6.8	ScalarntcEtherAlmData2EthHalfDuplex	read-only	current	This alarm is raised when an Ethernet interface is in half duplex mode as a result of a link negotiation. The alarm is not raised when the Ethernet interface w…
1.3.6.1.4.1.5835.5.2.500.1.6.9	ScalarntcEtherAlmMgmtFpEthLinkFail	read-only	current	This alarm is raised when there is no signal on the corresponding Ethernet interface. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.500.1.6.10	ScalarntcEtherAlmMgmtFpEthHalfDuplex	read-only	current	This alarm is raised when an Ethernet interface is in half duplex mode as a result of a link negotiation. The alarm is not raised when the Ethernet interface w…
1.3.6.1.4.1.5835.5.2.500.1.6.11	ScalarntcEtherAlmMgmtEthInterfaceFail	read-only	current	This alarm is raised when a failure is detected on the Ethernet interface. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.500.1.6.12	ScalarntcEtherAlmDataEthInterfaceFail	read-only	current	This alarm is raised when a failure is detected on the Ethernet interface. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.500.1.6.13	ScalarntcEtherAlmSat1EthLinkFail	read-only	current	This alarm is raised when there is no signal on the corresponding Ethernet interface. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.500.1.6.14	ScalarntcEtherAlmSat1EthHalfDuplex	read-only	current	This alarm is raised when an Ethernet interface is in half duplex mode as a result of a link negotiation. The alarm is not raised when the Ethernet interface w…
1.3.6.1.4.1.5835.5.2.500.1.6.15	ScalarntcEtherAlmSat2EthLinkFail	read-only	current	This alarm is raised when there is no signal on the corresponding Ethernet interface. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.500.1.6.16	ScalarntcEtherAlmSat2EthHalfDuplex	read-only	current	This alarm is raised when an Ethernet interface is in half duplex mode as a result of a link negotiation. The alarm is not raised when the Ethernet interface w…
1.3.6.1.4.1.5835.5.2.500.1.6.17	ScalarntcEtherAlmSatEthInterfaceFail	read-only	current	This alarm is raised when a failure is detected on the Ethernet interface. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.500.1.6.18	ScalarntcEtherAlmMgmtEthGenIfFail	read-only	current	This alarm is raised when a failure is detected on the Ethernet interface. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.500.1.6.19	ScalarntcEtherAlmDataEthGenIfFail	read-only	current	This alarm is raised when a failure is detected on the Ethernet interface. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.500.1.6.20	ScalarntcEtherAlmSatEthGenIfFail	read-only	current	This alarm is raised when a failure is detected on the Ethernet interface. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.500.1.7	ScalarntcEtherDataIgmpVersion	read-write	current	IGMP Version for the Data interfaces.
1.3.6.1.4.1.5835.5.2.500.2	IdentityntcEtherConformance		current	Conformance requirements.
1.3.6.1.4.1.5835.5.2.500.2.1	IdentityntcEtherConfCompliance		current	Device compliance statements.
1.3.6.1.4.1.5835.5.2.500.2.1.1	CompliancentcEtherConfCompV1Standard		current	Compliance statement for Newtec device MIB implementations.
1.3.6.1.4.1.5835.5.2.500.2.2	IdentityntcEtherConfGroup		current	Groups used by device compliance statements.
1.3.6.1.4.1.5835.5.2.500.2.2.1	GroupntcEtherConfGrpV1Standard		current	Managed objects that constitute version 1 of a system device with standard capabilities.