NRC-MultiGate
110 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1 | Nodemib-2 | |||
| 1.3.6.1.2.1.17 | Nodedot1dBridge | |||
| 1.3.6.1.2.1.17.1 | Nodedot1dBase | |||
| 1.3.6.1.2.1.17.1.1 | Scalardot1dBaseBridgeAddress | read-only | mandatory | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.2.1.17.1.2 | Scalardot1dBaseNumPorts | read-only | mandatory | The number of ports controlled by this bridging entity. |
| 1.3.6.1.2.1.17.1.3 | Scalardot1dBaseType | read-only | mandatory | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the… |
| 1.3.6.1.2.1.17.1.4 | Tabledot1dBasePortTable | not-accessible | mandatory | A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included. |
| 1.3.6.1.2.1.17.1.4.1 | Rowdot1dBasePortEntry | not-accessible | mandatory | A list of information for each port of the bridge. |
| 1.3.6.1.2.1.17.1.4.1.1 | Columndot1dBasePort | read-only | mandatory | The port number of the port for which this entry contains bridge management information. |
| 1.3.6.1.2.1.17.1.4.1.2 | Columndot1dBasePortIfIndex | read-only | mandatory | The value of the instance of the ifIndex object, defined in [4,6], for the interface corresponding to this port. |
| 1.3.6.1.2.1.17.1.4.1.3 | Columndot1dBasePortCircuit | read-only | mandatory | For a port which (potentially) has the same value of dot1dBasePortIfIndex as another port on the same bridge, this object contains the name of an object instan… |
| 1.3.6.1.2.1.17.1.4.1.4 | Columndot1dBasePortDelayExceededDiscards | read-only | mandatory | The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. |
| 1.3.6.1.2.1.17.1.4.1.5 | Columndot1dBasePortMtuExceededDiscards | read-only | mandatory | The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges. |
| 1.3.6.1.2.1.17.4 | Nodedot1dTp | |||
| 1.3.6.1.2.1.17.4.1 | Scalardot1dTpLearnedEntryDiscards | read-only | mandatory | The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the… |
| 1.3.6.1.2.1.17.4.2 | Scalardot1dTpAgingTime | read-write | mandatory | The timeout period in seconds for aging out dynamically learned forwarding information. |
| 1.3.6.1.2.1.17.4.3 | Tabledot1dTpFdbTable | not-accessible | mandatory | A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans… |
| 1.3.6.1.2.1.17.4.3.1 | Rowdot1dTpFdbEntry | not-accessible | mandatory | Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information. |
| 1.3.6.1.2.1.17.4.3.1.1 | Columndot1dTpFdbAddress | read-only | mandatory | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.2.1.17.4.3.1.2 | Columndot1dTpFdbPort | read-only | mandatory | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAdd… |
| 1.3.6.1.2.1.17.4.3.1.3 | Columndot1dTpFdbStatus | read-only | mandatory | The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the co… |
| 1.3.6.1.2.1.17.4.4 | Tabledot1dTpPortTable | not-accessible | mandatory | A table that contains information about every port that is associated with this transparent bridge. |
| 1.3.6.1.2.1.17.4.4.1 | Rowdot1dTpPortEntry | not-accessible | mandatory | A list of information for each port of a transparent bridge. |
| 1.3.6.1.2.1.17.4.4.1.1 | Columndot1dTpPort | read-only | mandatory | The port number of the port for which this entry contains Transparent bridging management information. |
| 1.3.6.1.2.1.17.4.4.1.2 | Columndot1dTpPortMaxInfo | read-only | mandatory | The maximum size of the INFO (non-MAC) field that this port will receive or transmit. |
| 1.3.6.1.2.1.17.4.4.1.3 | Columndot1dTpPortInFrames | read-only | mandatory | The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only coun… |
| 1.3.6.1.2.1.17.4.4.1.4 | Columndot1dTpPortOutFrames | read-only | mandatory | The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only … |
| 1.3.6.1.2.1.17.4.4.1.5 | Columndot1dTpPortInDiscards | read-only | mandatory | Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process. |
| 1.3.6.1.3.29 | NodesnmpDot3RptrMgt | |||
| 1.3.6.1.3.29.1 | NoderptrBasicPackage | |||
| 1.3.6.1.3.29.1.1 | NoderptrRptrInfo | |||
| 1.3.6.1.3.29.1.1.1 | ScalarrptrGroupCapacity | read-only | mandatory | The rptrGroupCapacity is the number of groups that can be contained within the repeater. Within each managed repeater, the groups are uniquely numbered in the … |
| 1.3.6.1.3.29.1.1.2 | ScalarrptrOperStatus | read-only | mandatory | The rptrOperStatus object indicates the operational state of the repeater. The rptrHealthText object may be consulted for more specific information about the s… |
| 1.3.6.1.3.29.1.1.3 | ScalarrptrHealthText | read-only | mandatory | The health text object is a text string that provides information relevant to the operational state of the repeater. Agents may use this string to provide deta… |
| 1.3.6.1.3.29.1.1.4 | ScalarrptrReset | read-write | mandatory | Setting this object to reset(2) causes a transition to the START state of Fig 9-2 in section 9 [IEEE 802.3 Std]. Setting this object to noReset(1) has no effec… |
| 1.3.6.1.3.29.1.1.5 | ScalarrptrNonDisruptTest | read-write | mandatory | Setting this object to selfTest(2) causes the repeater to perform a agent-specific, non- disruptive self-test that has the following characteristics: a) The na… |
| 1.3.6.1.3.29.1.1.6 | ScalarrptrTotalPartitionedPorts | read-only | mandatory | This object returns the total number of ports in the repeater whose current state meets all three of the following criteria: rptrPortOperStatus does not have t… |
| 1.3.6.1.3.29.1.2 | NoderptrGroupInfo | |||
| 1.3.6.1.3.29.1.2.1 | TablerptrGroupTable | not-accessible | mandatory | Table of descriptive and status information about the groups of ports. |
| 1.3.6.1.3.29.1.2.1.1 | RowrptrGroupEntry | not-accessible | mandatory | An entry in the table, containing information about a single group of ports. |
| 1.3.6.1.3.29.1.2.1.1.1 | ColumnrptrGroupIndex | read-only | mandatory | This object identifies the group within the repeater for which this entry contains information. This value is never greater than rptrGroupCapacity. |
| 1.3.6.1.3.29.1.2.1.1.2 | ColumnrptrGroupDescr | read-only | mandatory | A textual description of the group. This value should include the full name and version identification of the group's hardware type and indicate how the group … |
| 1.3.6.1.3.29.1.2.1.1.3 | ColumnrptrGroupObjectID | read-only | mandatory | The vendor's authoritative identification of the group. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-forwar… |
| 1.3.6.1.3.29.1.2.1.1.4 | ColumnrptrGroupOperStatus | read-only | mandatory | An object that indicates the operational status of the group. A status of notPresent(4) indicates that the group is temporarily or permanently physically and/o… |
| 1.3.6.1.3.29.1.2.1.1.5 | ColumnrptrGroupLastOperStatusChange | read-only | mandatory | An object that contains the value of sysUpTime at the time that the value of the rptrGroupOperStatus object for this group last changed. A value of zero indica… |
| 1.3.6.1.3.29.1.2.1.1.6 | ColumnrptrGroupPortCapacity | read-only | mandatory | The rptrGroupPortCapacity is the number of ports that can be contained within the group. Valid range is 1-1024. Within each group, the ports are uniquely numbe… |
| 1.3.6.1.3.29.1.3 | NoderptrPortInfo | |||
| 1.3.6.1.3.29.1.3.1 | TablerptrPortTable | not-accessible | mandatory | Table of descriptive and status information about the ports. |
| 1.3.6.1.3.29.1.3.1.1 | RowrptrPortEntry | not-accessible | mandatory | An entry in the table, containing information about a single port. |
| 1.3.6.1.3.29.1.3.1.1.1 | ColumnrptrPortGroupIndex | read-only | mandatory | This object identifies the group containing the port for which this entry contains information. |
| 1.3.6.1.3.29.1.3.1.1.2 | ColumnrptrPortIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains information. This value can never be greater than rptrGroupPortCapacity for the … |
| 1.3.6.1.3.29.1.3.1.1.3 | ColumnrptrPortAdminStatus | read-write | mandatory | Setting this object to disabled(2) disables the port. A disabled port neither transmits nor receives. Once disabled, a port must be explicitly enabled to resto… |
| 1.3.6.1.3.29.1.3.1.1.4 | ColumnrptrPortAutoPartitionState | read-only | mandatory | The autoPartitionState flag indicates whether the port is currently partitioned by the repeater's auto-partition protection. The conditions that cause port par… |
| 1.3.6.1.3.29.1.3.1.1.5 | ColumnrptrPortOperStatus | read-only | mandatory | This object indicates the port's operational status. The notPresent(3) status indicates the port is physically removed (note this may or may not be possible de… |
| 1.3.6.1.3.29.2 | NoderptrMonitorPackage | |||
| 1.3.6.1.3.29.2.1 | NoderptrMonitorRptrInfo | |||
| 1.3.6.1.3.29.2.2 | NoderptrMonitorGroupInfo | |||
| 1.3.6.1.3.29.2.3 | NoderptrMonitorPortInfo | |||
| 1.3.6.1.3.29.3 | NoderptrAddrTrackPackage | |||
| 1.3.6.1.3.29.3.1 | NoderptrAddrTrackRptrInfo | |||
| 1.3.6.1.3.29.3.2 | NoderptrAddrTrackGroupInfo | |||
| 1.3.6.1.3.29.3.3 | NoderptrAddrTrackPortInfo | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.315 | Nodenrc | |||
| 1.3.6.1.4.1.315.1 | Nodehub1 | |||
| 1.3.6.1.4.1.315.1.1 | Scalarhub1AutoPartition | read-write | mandatory | The value 'enabled' indicates that the HUB should auto partition ports. The value 'disabled' will disable this feature. |
| 1.3.6.1.4.1.315.1.2 | Scalarhub1ReconnectOnTransmission | read-write | mandatory | The value 'enabled' indicates that the HUB will reconnect an auto partitioned port if the HUB receives a packet from a partitioned port. The value 'disabled' i… |
| 1.3.6.1.4.1.315.1.3 | Scalarhub1IncludeOutOfWinColl | read-write | mandatory | A value of 'enabled' will cause Out Of Window Collisions to be counted along with In Window Collisions (as defined by IEEE 802.3) when determining if the colli… |
| 1.3.6.1.4.1.315.1.4 | Scalarhub1LoopbackPartition | read-write | mandatory | A value of 'enabled' will cause the HUB to automatically partition a port where a lack of loopback from the transeiver is detected. A value of 'disabled' will … |
| 1.3.6.1.4.1.315.1.5 | Scalarhub1CollisionLimit | read-write | mandatory | If consecutive collisions exceeding the value of this variable are detected on a port, the port will be auto partitioned 31 is the IEEE 802.3 consecutive colli… |
| 1.3.6.1.4.1.315.1.6 | Scalarhub1CarrierRecoverTime | read-write | mandatory | Time to recover carrier. A value of 'short' will use 3 bit times (IEEE 802.3 specification). A value of 'long' will use 5 bit times. |
| 1.3.6.1.4.1.315.1.7 | Scalarhub1EventCounterFlags | read-write | mandatory | A bit mask indicating which error types will cause an increment in the hub1PortEventCount Counter. Each bit has the following significance where each bit is li… |
| 1.3.6.1.4.1.315.1.8 | Scalarhub1EventRecordFlags | read-write | mandatory | A bit mask indicating which error types will cause corresponding bits in hub1PortEventRecordValue to be set when an error is detected. Each bit has the followi… |
| 1.3.6.1.4.1.315.1.9 | Scalarhub1BridgingMode | read-write | mandatory | Operational mode of the bridge: bridging Packets are being selectively forwarded according to the internal dynamically built tables. bypass All packets are bei… |
| 1.3.6.1.4.1.315.1.10 | Scalarhub1ProtocolFilterMode | read-write | mandatory | Filtering Mode of the Hub: off The protocol filtering logic is disabled. filter The protocol filtering logic is enabled and packets with the protocol types ind… |
| 1.3.6.1.4.1.315.1.11 | Scalarhub1FilterProtocols | read-write | mandatory | Protocol types to be filtered or passed by the bridging logic. This is a variable length array of between 0 and 16 2-byte entries, each entry containing the 2-… |
| 1.3.6.1.4.1.315.1.12 | Scalarhub1ConsoleBaudRate | read-write | mandatory | The baud rate of the console port. Legal values are 9600, 4800, 2400, and 1200. |
| 1.3.6.1.4.1.315.1.13 | Scalarhub1Reset | read-write | mandatory | Setting this object to 'reset' will cause the Hub1 to perform a hardware reset within approximately 5 seconds. Setting this object to 'no-reset will have no ef… |
| 1.3.6.1.4.1.315.1.14 | Scalarhub1SoftwareVersion | read-write | mandatory | The version of software running on the Hub. On versions of the Hub that support dynamic download, this variable may be set to cause a new version of the softwa… |
| 1.3.6.1.4.1.315.1.15 | Tablehub1PortTable | not-accessible | mandatory | A table of port specific information for the NRC HUB 1 product. This table supplements the Repeater MIB Ports Table. |
| 1.3.6.1.4.1.315.1.15.1 | Rowhub1PortEntry | not-accessible | mandatory | A list of information for every port. |
| 1.3.6.1.4.1.315.1.15.1.1 | Columnhub1PortIndex | read-only | mandatory | Port number that corresponds to the index value in the Repeater MIB variable rptrPortIndex. |
| 1.3.6.1.4.1.315.1.15.1.2 | Columnhub1PortForceReconnect | read-write | mandatory | Setting this variable to the value 'force- reconnect' will cause the port to be reconnected assuming that it is currently in the 'Partition' state. If the port… |
| 1.3.6.1.4.1.315.1.15.1.3 | Columnhub1PortPartitionReason | read-only | mandatory | Reason for port being in the partitioned state. If the port is currently not partitioned, this variable will have the value 'not-partitioned'. |
| 1.3.6.1.4.1.315.1.15.1.4 | Columnhub1PortLinkState | read-only | mandatory | This variable's meaning varies depending on the type of HUB: 10Base2 Not Applicable. A value of 'unknown' will always be returned. 10BaseT Link Test is being r… |
| 1.3.6.1.4.1.315.1.15.1.5 | Columnhub1PortLinkEnable | read-write | mandatory | Enabling this variable has the following effect depending on the type of HUB: 10Base2 No Effect 10BaseT Link Test Enabled Fiber LMON Test Enabled |
| 1.3.6.1.4.1.315.1.15.1.6 | Columnhub1PortPolarityStatus | read-only | mandatory | Current port Polarity status. NOTE: a value of 'ok' will always be returned for 10Base2 and FOIRL HUBs |
| 1.3.6.1.4.1.315.1.15.1.7 | Columnhub1PortName | read-write | mandatory | Administrator assigned ASCII port name. |
| 1.3.6.1.4.1.315.1.15.1.8 | Columnhub1PortEventCount | read-only | mandatory | Counter of all error events that were detected on this port and at the same time were marked for collection in the hub1EventCounterFlags variable. This is a 16… |
| 1.3.6.1.4.1.315.1.15.1.9 | Columnhub1PortRecordValue | read-only | mandatory | Bit Mask that has bits set for each error event that was detected on this port and at the same time was marked for collection in the hub1EventRecordFlags varia… |
| 1.3.6.1.4.1.315.1.15.1.10 | Columnhub1PortType | read-only | mandatory | The type of port |
| 1.3.6.1.4.1.315.1.16 | Tablehub1IFTable | not-accessible | mandatory | A table that contains HUB 1 specific supplements to the MIB-II interfaces table. |
| 1.3.6.1.4.1.315.1.16.1 | Rowhub1IFEntry | not-accessible | mandatory | Entries in the HUB 1 supplement table. |
| 1.3.6.1.4.1.315.1.16.1.1 | Columnhub1IFIndex | read-only | mandatory | Interface index that corresponds to ifIndex in the interfaces table from MIB II. |
| 1.3.6.1.4.1.315.1.16.1.2 | Columnhub1IFInAlignmentErrors | read-only | mandatory | The number of alignment errors detected by this interface. |
| 1.3.6.1.4.1.315.1.16.1.3 | Columnhub1IFInCrcErrors | read-only | mandatory | The number of CRC errors detected by this interface. |
| 1.3.6.1.4.1.315.1.16.1.4 | Columnhub1IFInCollisions | read-only | mandatory | The number of collisions detected by this interface. |
| 1.3.6.1.4.1.315.1.16.1.5 | Columnhub1IFInMtuExceededDiscards | read-only | mandatory | The number of frames discarded by this interface on receive due to an excessive size. |
| 1.3.6.1.4.1.315.1.16.1.6 | Columnhub1IFInShortErrors | read-only | mandatory | The number of frames discarded by this interface because they were less than the Ethernet minumum frame size of 64 bytes. |
| 1.3.6.1.4.1.315.1.16.1.7 | Columnhub1IFInOverrunDiscards | read-only | mandatory | The number of frames discarded by this interface due to a LAN Controller FIFO overflow on receive. |
| 1.3.6.1.4.1.315.1.16.1.8 | Columnhub1IFOutUnderruns | read-only | mandatory | The number of frames which had to be retransmitted by this interface due to a LAN Controller FIFO underrun error on transmit. |
| 1.3.6.1.4.1.315.1.16.1.9 | Columnhub1IFOutLostCts | read-only | mandatory | The number of times Carrier Transmit Sense (CTS) was lost on this interface during frame transmission. The hub will attempt to retransmit frames when transmiss… |
| 1.3.6.1.4.1.315.1.16.1.10 | Columnhub1IFOutLostCrs | read-only | mandatory | The number of times Carrier Receive Sense (CRS) was lost on this interface during frame transmission. The hub will attempt to retransmit frames when transmissi… |
| 1.3.6.1.4.1.315.1.16.1.11 | Columnhub1IFOutMtuExceededDiscards | read-only | mandatory | The number of frames discarded by this interface on transmit due to an excessive size. |
| 1.3.6.1.4.1.315.1.16.1.12 | Columnhub1IFOutCollisions | read-only | mandatory | The number of collisions detected by this interface while attempting to transmit a packet. |
| 1.3.6.1.4.1.315.1.16.1.13 | Columnhub1IFChannelUtilization | read-only | mandatory | Utilization statistics for the last 60 seconds of operation of the bridging logic associated with this interface. The OCTET STRING is a series of 45 16-bit wor… |
| 1.3.6.1.4.1.315.1.17 | Scalarhub1LastFailureReason | read-only | mandatory | The last error that caused a Hub failure. A value of zero (0) indicates that there has not been a Hub failure since the novram was last erased. A non-zero valu… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BridgeId | OCTET STRING (SIZE (8)) | ||
| MacAddress | OCTET STRING (SIZE (6)) | ||
| Timeout | INTEGER |