NTRON714FX6-MIB
101 objects
Added ntron and series specific identifiers, fixed port Sequence and changed TRAP-TYPE to NOTIFICATION-TYPE
Imported Objects
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.28381 | Nodentron | |||
| 1.3.6.1.4.1.28381.700 | Nodentron7xx | |||
| 1.3.6.1.4.1.28381.700.7 | Identityntron714fx6 | Added ntron and series specific identifiers, fixed port Sequence and changed TRAP-TYPE to NOTIFICATION-TYPE | ||
| 1.3.6.1.4.1.28381.700.7.1 | NodentronSysGroup | |||
| 1.3.6.1.4.1.28381.700.7.1.1 | ScalarntronSysReset | read-write | current | Setting this object to 'switchReset' will cause the switch to perform a hardware reset within approximately 4-6 seconds.Setting this object to 'switchNoReset '… |
| 1.3.6.1.4.1.28381.700.7.1.2 | ScalarntronSwVersion | read-only | current | This object identifies the Version Number of Current Release. |
| 1.3.6.1.4.1.28381.700.7.1.3 | ScalarntronBuildDateAndTime | read-only | current | This object will hold the image build date and time. |
| 1.3.6.1.4.1.28381.700.7.1.4 | ScalarntronTotalRam | read-only | current | This object will give the total RAM available in the system. |
| 1.3.6.1.4.1.28381.700.7.1.5 | ScalarntronTotalFlash | read-only | current | This object will give the total Flash available in system. |
| 1.3.6.1.4.1.28381.700.7.1.6 | ScalarntronEthernetPortCount | read-only | current | This object will return the number of 10/100 Mbps Ethernet ports on the switch. |
| 1.3.6.1.4.1.28381.700.7.1.7 | ScalarntronCurrentIpAddress | read-only | current | The Current IP address is the one which is currently used and is obtained dynamically through protocol interaction.( DHCP ) This address is NULL if the Address… |
| 1.3.6.1.4.1.28381.700.7.1.8 | ScalarntronConfiguredIpAddress | read-write | current | The Configured IP address of the device. This is the address configured through Network or cli. |
| 1.3.6.1.4.1.28381.700.7.1.9 | ScalarntronConfiguredSubnetMask | read-write | current | The Configured Subnet Mask of the device. |
| 1.3.6.1.4.1.28381.700.7.1.10 | ScalarntronConfiguredGateway | read-write | current | The Configured Gateway/Router address of the device |
| 1.3.6.1.4.1.28381.700.7.1.11 | ScalarntronUpdateConfiguredIpAddr | read-write | current | By setting this object to enable will update the ipaddress, subnetmask and the router ip address. |
| 1.3.6.1.4.1.28381.700.7.1.12 | ScalarntronIPAddressStatus | read-only | current | The IP Address can be obtained/configured by any of the above different ways. This object specifies how IP address currently on the switch , was configured/obt… |
| 1.3.6.1.4.1.28381.700.7.1.13 | ScalarntronTotalNoOfPorts | read-only | current | This object will give the total number of ports available in the device . |
| 1.3.6.1.4.1.28381.700.7.1.14 | ScalarntronMacAddress | read-only | current | The mac address of the system . |
| 1.3.6.1.4.1.28381.700.7.1.15 | ScalarntronContactStatus | read-only | current | The status of the switch contact . |
| 1.3.6.1.4.1.28381.700.7.1.16 | ScalarntronPowerFault | read-only | current | The power fault status . |
| 1.3.6.1.4.1.28381.700.7.1.17 | ScalarntronModelString | read-only | current | This object will hold the switch model string. |
| 1.3.6.1.4.1.28381.700.7.1.18 | ScalarntronBlVersion | read-only | current | This object identifies the Version Number of Current Bootloader Release. |
| 1.3.6.1.4.1.28381.700.7.2 | NodentronNViewGroup | |||
| 1.3.6.1.4.1.28381.700.7.2.1 | ScalarntronNViewState | read-write | current | Global status of NView broadcasts. |
| 1.3.6.1.4.1.28381.700.7.2.2 | ScalarntronNViewInterval | read-write | current | Global interval between NView broadcasts. |
| 1.3.6.1.4.1.28381.700.7.2.3 | TablentronNViewTable | not-accessible | current | The table that contains the information about the per port NView status. |
| 1.3.6.1.4.1.28381.700.7.2.3.1 | RowntronNViewEntry | not-accessible | current | An entry in the ntronNViewTable. |
| 1.3.6.1.4.1.28381.700.7.2.3.1.1 | ColumnntronNViewPortNumber | read-only | current | The unique identifier to identify the entry in the ntronNViewTable. |
| 1.3.6.1.4.1.28381.700.7.2.3.1.2 | ColumnntronNViewMulticast | read-write | current | The status of a port for transmitting NView packets. |
| 1.3.6.1.4.1.28381.700.7.2.3.1.3 | ColumnntronNViewStats | read-write | current | The status of a port for having its stats sent as NView packets. |
| 1.3.6.1.4.1.28381.700.7.3 | NodentronTFTPGroup | |||
| 1.3.6.1.4.1.28381.700.7.3.1 | ScalarntronTFTPServerIpAddress | read-write | current | The ipaddress of the Tftp server. |
| 1.3.6.1.4.1.28381.700.7.3.2 | ScalarntronTFTPRemoteFileName | read-write | current | The field gives the file name to be downloaded. |
| 1.3.6.1.4.1.28381.700.7.3.3 | ScalarntronTFTPAction | read-write | current | Setting this object to the value mentioned above will cause the specific function to be called. When performing config actions either the config flags below or… |
| 1.3.6.1.4.1.28381.700.7.3.4 | ScalarntronTFTPConfigFlags | read-write | current | If not manually set by the user the web default values will be used in the above action. Flags are reset to use the default values when ntronTFTPAction is comp… |
| 1.3.6.1.4.1.28381.700.7.7 | NodentronPortMirroringGroup | |||
| 1.3.6.1.4.1.28381.700.7.7.1 | ScalarntronMirroringState | read-write | current | This Field gives the current state of the mirror. Setting this object to an value enable the mirror .If disabled, port operation works normally. No Traffic get… |
| 1.3.6.1.4.1.28381.700.7.7.2 | ScalarntronMirroringDestinationPort | read-write | current | This is the Destination port number for which there is another mirror port.If the ntronMirroringState is Enabled then the mirror port gets routed with all the … |
| 1.3.6.1.4.1.28381.700.7.7.3 | TablentronPortMirroringTable | not-accessible | current | The table which contains the mirroring information of the ports . |
| 1.3.6.1.4.1.28381.700.7.7.3.1 | RowntronPortMirroringEntry | not-accessible | current | An entry in the ntronPortMirroringTable. |
| 1.3.6.1.4.1.28381.700.7.7.3.1.1 | ColumnntronPortMirroringNo | read-only | current | This object identifies the port of the switch. |
| 1.3.6.1.4.1.28381.700.7.7.3.1.2 | ColumnntronPortMirroringTx | read-write | current | This object shows the mirror Tx status of the port. |
| 1.3.6.1.4.1.28381.700.7.7.3.1.3 | ColumnntronPortMirroringRx | read-write | current | This object shows the mirror Rx status of the port. |
| 1.3.6.1.4.1.28381.700.7.8 | NodentronPortConfigGroup | |||
| 1.3.6.1.4.1.28381.700.7.8.1 | TablentronPortConfigTable | not-accessible | current | The table which contains the statistics information of the ports. |
| 1.3.6.1.4.1.28381.700.7.8.1.1 | RowntronPortConfigEntry | not-accessible | current | An entry in the ntronPortStatisticsTable. |
| 1.3.6.1.4.1.28381.700.7.8.1.1.1 | ColumnntronPortNo | read-only | current | This object identifies the port of the switch. |
| 1.3.6.1.4.1.28381.700.7.8.1.1.2 | ColumnntronPortName | read-only | current | This attribute associates a user defined string name with the port. |
| 1.3.6.1.4.1.28381.700.7.8.1.1.3 | ColumnntronPortAdminState | read-write | current | This attribute allows an administrative request to disable or enable communications on this port. |
| 1.3.6.1.4.1.28381.700.7.8.1.1.4 | ColumnntronPortSpeed | read-write | current | This attribute allows an administrative request to read/write the speed of this port. |
| 1.3.6.1.4.1.28381.700.7.8.1.1.5 | ColumnntronPortDuplexStatus | read-write | current | This attribute allows an administrative request to read the status of Duplex on this port. |
| 1.3.6.1.4.1.28381.700.7.8.1.1.6 | ColumnntronPortLinkState | read-only | current | This attribute allows an administrative request to read the status of link state on this port. |
| 1.3.6.1.4.1.28381.700.7.8.1.1.7 | ColumnntronPortPriority | read-write | current | This attribute allows an administrative request to read/write the Priority of the port. |
| 1.3.6.1.4.1.28381.700.7.8.1.1.8 | ColumnntronPortFlowControl | read-write | current | This per-port attribute describes whether the port identified has flow Control Enabled or not. Flow Control on Full Duplex and Half Duplex is detected and Auto… |
| 1.3.6.1.4.1.28381.700.7.8.1.1.9 | ColumnntronPortBackPressure | read-write | current | This per-port attribute describes whether the port identified has BackPressure Enabled or not. BY Default, BackPressure is Disabled. |
| 1.3.6.1.4.1.28381.700.7.8.1.1.10 | ColumnntronPortAutonegotiation | read-write | current | This per-port attribute describes whether the port identified has AutoNegotiation Enabled or not. BY Default, BackPressure is Disabled. |
| 1.3.6.1.4.1.28381.700.7.8.1.1.11 | ColumnntronPortOverWritePriority | read-write | current | This per-port attribute describes whether the port identified has OverWritePriority Enabled or not. BY Default, BackPressure is Disabled. |
| 1.3.6.1.4.1.28381.700.7.8.1.1.12 | ColumnntronPortPVID | read-write | current | This is the port VLAN ID. |
| 1.3.6.1.4.1.28381.700.7.8.1.1.13 | ColumnntronPortCrossover | read-write | current | This is the port setting for Crossover. |
| 1.3.6.1.4.1.28381.700.7.9 | NodentronIgmpGroup | |||
| 1.3.6.1.4.1.28381.700.7.9.1 | ScalarntronIgmpState | read-write | current | This object holds the current state of the igmp. By configuring this to Enable, the igmp will be enabled. |
| 1.3.6.1.4.1.28381.700.7.9.2 | ScalarntronQueryMode | read-write | current | To set the switch's query mode. |
| 1.3.6.1.4.1.28381.700.7.9.3 | ScalarntronRouterMode | read-write | current | To set the switch's router mode. |
| 1.3.6.1.4.1.28381.700.7.9.4 | TablentronIgmpMemberTable | not-accessible | current | The table that contains the information about the igmp members. |
| 1.3.6.1.4.1.28381.700.7.9.4.1 | RowntronIgmpMemberEntry | not-accessible | current | An entry in the igmp member table. |
| 1.3.6.1.4.1.28381.700.7.9.4.1.1 | ColumnntronIgmpMemberTableIndex | read-only | current | The unique identifier to identify the igmp member. |
| 1.3.6.1.4.1.28381.700.7.9.4.1.2 | ColumnntronIgmpGroupIpAddress | read-only | current | The IpAddress of the Multicast Group. |
| 1.3.6.1.4.1.28381.700.7.9.4.1.3 | ColumnntronIgmpPortNumber | read-only | current | The port number from which the multicast Ip is received. |
| 1.3.6.1.4.1.28381.700.7.9.4.1.4 | ColumnntronIgmpVlanId | read-only | current | The Vlan Id to which the igmpPortNumber belongs. |
| 1.3.6.1.4.1.28381.700.7.9.5 | TablentronIgmpRouterTable | not-accessible | current | The table that contains the information about the igmp routers. |
| 1.3.6.1.4.1.28381.700.7.9.5.1 | RowntronIgmpRouterEntry | not-accessible | current | An entry in the igmp router table. |
| 1.3.6.1.4.1.28381.700.7.9.5.1.1 | ColumnntronIgmpRouterTableIndex | read-only | current | The unique identifier to identify the igmp router. |
| 1.3.6.1.4.1.28381.700.7.9.5.1.2 | ColumnntronIgmpRouterIpAddress | read-only | current | The IpAddress of the Router. |
| 1.3.6.1.4.1.28381.700.7.9.5.1.3 | ColumnntronIgmpRouterPortNumber | read-only | current | The port no from which the router query has been received. |
| 1.3.6.1.4.1.28381.700.7.9.6 | TablentronIgmpPortTable | not-accessible | current | The table that contains the information about the igmp port status. |
| 1.3.6.1.4.1.28381.700.7.9.6.1 | RowntronIgmpPortEntry | not-accessible | current | An entry in the igmp port table. |
| 1.3.6.1.4.1.28381.700.7.9.6.1.1 | ColumnntronIgmpPortTableIndex | read-only | current | The unique identifier to identify the igmp port. |
| 1.3.6.1.4.1.28381.700.7.9.6.1.2 | ColumnntronIgmpPortManRouter | read-write | current | Per-Port Attribute for if the port is a Manual Router Port |
| 1.3.6.1.4.1.28381.700.7.9.6.1.3 | ColumnntronIgmpPortRFilter | read-write | current | Per-Port Attribute for if the port has RFilter enabled |
| 1.3.6.1.4.1.28381.700.7.13 | NodentronBroadcastGroup | |||
| 1.3.6.1.4.1.28381.700.7.13.1 | TablentronBroadcastBPCLTable | not-accessible | current | The table that contains the information about the best packet count limit. |
| 1.3.6.1.4.1.28381.700.7.13.1.1 | RowntronBroadcastBPCLEntry | not-accessible | current | An entry in the ntronBroadcastBPCLTable. |
| 1.3.6.1.4.1.28381.700.7.13.1.1.1 | ColumnntronBroadcastPortNumber | read-only | current | The unique identifier to identify the entry in the ntronBroadcastBPCLTable. |
| 1.3.6.1.4.1.28381.700.7.13.1.1.2 | ColumnntronBroadcastPercentage | read-write | current | The percentage of broadcast packets that can be allowed. |
| 1.3.6.1.4.1.28381.700.7.14 | NodentronConfigGroup | |||
| 1.3.6.1.4.1.28381.700.7.14.1 | ScalarntronConfigSave | read-write | current | If this configurable object is set to enable then all the Configured data of the all the modules is written into flash. |
| 1.3.6.1.4.1.28381.700.7.14.2 | ScalarntronConfigErase | read-write | current | Setting this object to the value mentioned above will cause the specific function to be called. When performing the enable action either the config flags below… |
| 1.3.6.1.4.1.28381.700.7.14.3 | ScalarntronConfigEraseFlags | read-write | current | If not manually set by the user the web default values will be used in the above action. Flags are reset to use the default values when ntronConfigErase is com… |
| 1.3.6.1.4.1.28381.700.7.15 | NodentronSnmpGroup | |||
| 1.3.6.1.4.1.28381.700.7.15.1 | ScalarntronSnmpGetCommunityName | read-write | current | The community name used to authenticate the get/getnext request from snmp Manager. |
| 1.3.6.1.4.1.28381.700.7.15.2 | ScalarntronSnmpTrapCommunityName | read-write | current | The community name used to authenticate the Trap request to snmp Manager. |
| 1.3.6.1.4.1.28381.700.7.15.3 | TablentronSnmpManagerIpAddressTable | not-accessible | current | The ip address table of the snmp managers. |
| 1.3.6.1.4.1.28381.700.7.15.3.1 | RowntronSnmpManagerIpAddressEntry | not-accessible | current | An entry in the ntronSnmpManagerIpAddressTable |
| 1.3.6.1.4.1.28381.700.7.15.3.1.1 | ColumnntronSnmpManagerTableIndex | read-only | current | The index of the snmp manager. |
| 1.3.6.1.4.1.28381.700.7.15.3.1.2 | ColumnntronSnmpManagerIpAddress | read-write | current | The Ip Address of the snmp Manager. |
| 1.3.6.1.4.1.28381.700.7.16 | NodentronNRingGroup | |||
| 1.3.6.1.4.1.28381.700.7.16.1 | ScalarntronNRingMode | read-only | current | Operational mode of NRing system. |
| 1.3.6.1.4.1.28381.700.7.16.2 | ScalarntronNRingState | read-only | current | Status of NRing system. |
| 1.3.6.1.4.1.28381.700.7.16.3 | ScalarntronNRingVersion | read-only | current | Version of NRing system. |
| 1.3.6.1.4.1.28381.700.7.18 | NodentronTrapGroup | |||
| 1.3.6.1.4.1.28381.700.7.18.1 | NotificationntronPowerChange | current | An ntronPowerChange trap signifies that the sending SNMP application entity recognizes a change in the power fault variable either from a power failure or a re… |