Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
1865 objects
No module-level DESCRIPTION found.
Imported Objects
| Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB | Counter32 DisplayString Gauge32 Integer32 InterfaceIndex RowPointer RowStatus StorageType Unsigned32 |
| Nortel-MsCarrier-MscPassport-TextualConventionsMIB | AsciiString EnterpriseDateAndTime Hex Link NonReplicated PassportCounter64 |
| Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB | mscComponents mscPassportMIBs |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12 | NodemscLp | |||
| 1.3.6.1.4.1.562.36.2.1.12.1 | TablemscLpRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLp components. |
| 1.3.6.1.4.1.562.36.2.1.12.1.1 | RowmscLpRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLp component. |
| 1.3.6.1.4.1.562.36.2.1.12.1.1.1 | ColumnmscLpRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLp components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.1.1.2 | ColumnmscLpComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.1.1.4 | ColumnmscLpStorageType | read-only | mandatory | This variable represents the storage type value for the mscLp tables. |
| 1.3.6.1.4.1.562.36.2.1.12.1.1.10 | ColumnmscLpIndex | not-accessible | mandatory | This variable represents the index for the mscLp tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5 | NodemscLpDS3 | |||
| 1.3.6.1.4.1.562.36.2.1.12.5.1 | TablemscLpDS3RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS3 components. |
| 1.3.6.1.4.1.562.36.2.1.12.5.1.1 | RowmscLpDS3RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS3 component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.1.1.1 | ColumnmscLpDS3RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpDS3 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.5.1.1.2 | ColumnmscLpDS3ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.5.1.1.4 | ColumnmscLpDS3StorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS3 tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.1.1.10 | ColumnmscLpDS3Index | not-accessible | mandatory | This variable represents the index for the mscLpDS3 tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.2 | NodemscLpDS3Test | |||
| 1.3.6.1.4.1.562.36.2.1.12.5.2.1 | TablemscLpDS3TestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS3Test components. |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.1.1 | RowmscLpDS3TestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS3Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.1 | ColumnmscLpDS3TestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpDS3Test components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.2 | ColumnmscLpDS3TestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.4 | ColumnmscLpDS3TestStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS3Test tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.10 | ColumnmscLpDS3TestIndex | not-accessible | mandatory | This variable represents the index for the mscLpDS3Test tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.10 | TablemscLpDS3TestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.10.1 | RowmscLpDS3TestStateEntry | not-accessible | mandatory | An entry in the mscLpDS3TestStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.10.1.1 | ColumnmscLpDS3TestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.10.1.2 | ColumnmscLpDS3TestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.10.1.3 | ColumnmscLpDS3TestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.11 | TablemscLpDS3TestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.11.1 | RowmscLpDS3TestSetupEntry | not-accessible | mandatory | An entry in the mscLpDS3TestSetupTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.1 | ColumnmscLpDS3TestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.2 | ColumnmscLpDS3TestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.3 | ColumnmscLpDS3TestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.4 | ColumnmscLpDS3TestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.5 | ColumnmscLpDS3TestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.6 | ColumnmscLpDS3TestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.7 | ColumnmscLpDS3TestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.8 | ColumnmscLpDS3TestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.12 | TablemscLpDS3TestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1 | RowmscLpDS3TestResultsEntry | not-accessible | mandatory | An entry in the mscLpDS3TestResultsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.1 | ColumnmscLpDS3TestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.2 | ColumnmscLpDS3TestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.3 | ColumnmscLpDS3TestCauseOfTermination | read-only | mandatory | This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. t… |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.4 | ColumnmscLpDS3TestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.5 | ColumnmscLpDS3TestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.6 | ColumnmscLpDS3TestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.7 | ColumnmscLpDS3TestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.8 | ColumnmscLpDS3TestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.9 | ColumnmscLpDS3TestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.10 | ColumnmscLpDS3TestErroredFrmRx | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.11 | ColumnmscLpDS3TestBitErrorRate | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.5.3 | NodemscLpDS3CBit | |||
| 1.3.6.1.4.1.562.36.2.1.12.5.3.1 | TablemscLpDS3CBitRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS3CBit components. |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.1.1 | RowmscLpDS3CBitRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS3CBit component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.1 | ColumnmscLpDS3CBitRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpDS3CBit components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.2 | ColumnmscLpDS3CBitComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.4 | ColumnmscLpDS3CBitStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS3CBit tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.10 | ColumnmscLpDS3CBitIndex | not-accessible | mandatory | This variable represents the index for the mscLpDS3CBit tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.10 | TablemscLpDS3CBitOperationalTable | not-accessible | mandatory | This group contains the DS3 C-Bit Parity operational data for the CBIT component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.10.1 | RowmscLpDS3CBitOperationalEntry | not-accessible | mandatory | An entry in the mscLpDS3CBitOperationalTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.10.1.1 | ColumnmscLpDS3CBitFarEndAlarm | read-only | mandatory | This attribute indicates the Far-End alarm signal that is currently received at the DS3 interface. This signal is carried over the Far- End Alarm and Control (… |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.10.1.2 | ColumnmscLpDS3CBitLoopedbackToFarEnd | read-only | mandatory | This indicates whether or not the DS3 component is currently looping back the incoming DS3 signal or one of its DS1 tributaries to the far-end DS3 terminal. Th… |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.10.1.3 | ColumnmscLpDS3CBitLoopbackAtFarEndRequested | read-only | mandatory | This attribute indicates which DS1 tributaries are being looped back, or if the DS3 line is being looped back. Each value listed indicates a loopback request h… |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.11 | TablemscLpDS3CBitStatsTable | not-accessible | mandatory | This group contains the DS3 C-Bit Parity statistical data for the CBIT component. Each attribute type is a non-negative integer which monotonically increases u… |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1 | RowmscLpDS3CBitStatsEntry | not-accessible | mandatory | An entry in the mscLpDS3CBitStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.1 | ColumnmscLpDS3CBitCbitErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the DS3 port has not suffered any C-Bit errors. |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.2 | ColumnmscLpDS3CBitCbitCodeViolations | read-only | mandatory | This attribute indicates the total count of C-Bit Parity Code Violations (CCV). A CCV is obtained when the parity calculated over the previous DS3 frame and th… |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.3 | ColumnmscLpDS3CBitCbitErroredSec | read-only | mandatory | This attribute indicates the total number of C-Bit Parity Errored Seconds (CES). A CES second is declared for second intervals containing one or more CCVs or w… |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.4 | ColumnmscLpDS3CBitCbitSevErroredSec | read-only | mandatory | This attribute indicates the total number of C-Bit Parity Severely Errored Seconds (CSES). A CSES is declared for second intervals containing more than 44 CCVs… |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.5 | ColumnmscLpDS3CBitCbitUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 co… |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.6 | ColumnmscLpDS3CBitFarEndErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the DS3 port has not suffered of any far-end errors. |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.7 | ColumnmscLpDS3CBitFarEndCodeViolations | read-only | mandatory | This attribute indicates the total count of DS3 frames containing a Coding Violation on the Far-End (FECV), also known as a Far-End Block Error (FEBE). Each FE… |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.8 | ColumnmscLpDS3CBitFarEndErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more FECVs or one o… |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.9 | ColumnmscLpDS3CBitFarEndSevErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Severely Errored Seconds (FESES). A FESES is declared for second intervals containing more than 44 FECVs o… |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.10 | ColumnmscLpDS3CBitFarEndSefAisSec | read-only | mandatory | This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more far-end SEF/AIS d… |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.11 | ColumnmscLpDS3CBitFarEndUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the DS3 far-end path is unavailable. The DS3 far-end path becomes unavailable at th… |
| 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.12 | ColumnmscLpDS3CBitFarEndFailures | read-only | mandatory | This attribute indicates the total number of times that a far-end path failure (i.e. a Far-End SEF/AIS defect) has been declared. This attribute is a non-negat… |
| 1.3.6.1.4.1.562.36.2.1.12.5.4 | NodemscLpDS3Plcp | |||
| 1.3.6.1.4.1.562.36.2.1.12.5.4.1 | TablemscLpDS3PlcpRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS3Plcp components. |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.1.1 | RowmscLpDS3PlcpRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS3Plcp component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.1 | ColumnmscLpDS3PlcpRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpDS3Plcp components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.2 | ColumnmscLpDS3PlcpComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.4 | ColumnmscLpDS3PlcpStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS3Plcp tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.10 | ColumnmscLpDS3PlcpIndex | not-accessible | mandatory | This variable represents the index for the mscLpDS3Plcp tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.10 | TablemscLpDS3PlcpOperationalTable | not-accessible | mandatory | This group contains the operational data for the PLCP component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.10.1 | RowmscLpDS3PlcpOperationalEntry | not-accessible | mandatory | An entry in the mscLpDS3PlcpOperationalTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.10.1.1 | ColumnmscLpDS3PlcpLofAlarm | read-only | mandatory | This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for… |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.10.1.2 | ColumnmscLpDS3PlcpRxRaiAlarm | read-only | mandatory | This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLC… |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.11 | TablemscLpDS3PlcpStatsTable | not-accessible | mandatory | This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a… |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1 | RowmscLpDS3PlcpStatsEntry | not-accessible | mandatory | An entry in the mscLpDS3PlcpStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.1 | ColumnmscLpDS3PlcpErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors. |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.2 | ColumnmscLpDS3PlcpCodingViolations | read-only | mandatory | This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP fram… |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.3 | ColumnmscLpDS3PlcpErroredSec | read-only | mandatory | This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was… |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.4 | ColumnmscLpDS3PlcpSevErroredSec | read-only | mandatory | This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PL… |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.5 | ColumnmscLpDS3PlcpSevErroredFramingSec | read-only | mandatory | This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out o… |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.6 | ColumnmscLpDS3PlcpUnavailSec | read-only | mandatory | This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP … |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.7 | ColumnmscLpDS3PlcpFarEndErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors. |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.8 | ColumnmscLpDS3PlcpFarEndCodingViolations | read-only | mandatory | This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second inter… |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.9 | ColumnmscLpDS3PlcpFarEndErroredSec | read-only | mandatory | This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second i… |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.10 | ColumnmscLpDS3PlcpFarEndSevErroredSec | read-only | mandatory | This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second inter… |
| 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.11 | ColumnmscLpDS3PlcpFarEndUnavailableSec | read-only | mandatory | This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP… |
| 1.3.6.1.4.1.562.36.2.1.12.5.5 | NodemscLpDS3Cell | |||
| 1.3.6.1.4.1.562.36.2.1.12.5.5.1 | TablemscLpDS3CellRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS3Cell components. |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.1.1 | RowmscLpDS3CellRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS3Cell component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.1 | ColumnmscLpDS3CellRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpDS3Cell components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.2 | ColumnmscLpDS3CellComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.4 | ColumnmscLpDS3CellStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS3Cell tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.10 | ColumnmscLpDS3CellIndex | not-accessible | mandatory | This variable represents the index for the mscLpDS3Cell tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.10 | TablemscLpDS3CellProvTable | not-accessible | mandatory | This group contains the provisioning attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.10.1 | RowmscLpDS3CellProvEntry | not-accessible | mandatory | An entry in the mscLpDS3CellProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.10.1.1 | ColumnmscLpDS3CellAlarmActDelay | read-write | mandatory | This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The tim… |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.10.1.2 | ColumnmscLpDS3CellScrambleCellPayload | read-write | mandatory | Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit p… |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.10.1.3 | ColumnmscLpDS3CellCorrectSingleBitHeaderErrors | read-write | mandatory | This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affecte… |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.11 | TablemscLpDS3CellOperTable | not-accessible | mandatory | This group contains the common operational attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.11.1 | RowmscLpDS3CellOperEntry | not-accessible | mandatory | An entry in the mscLpDS3CellOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.11.1.1 | ColumnmscLpDS3CellLcdAlarm | read-only | mandatory | This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been obser… |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.12 | TablemscLpDS3CellStatsTable | not-accessible | mandatory | This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.12.1 | RowmscLpDS3CellStatsEntry | not-accessible | mandatory | An entry in the mscLpDS3CellStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.1 | ColumnmscLpDS3CellUncorrectableHecErrors | read-only | mandatory | This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an… |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.2 | ColumnmscLpDS3CellSevErroredSec | read-only | mandatory | This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declar… |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.3 | ColumnmscLpDS3CellReceiveCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a peri… |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.4 | ColumnmscLpDS3CellTransmitCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a p… |
| 1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.5 | ColumnmscLpDS3CellCorrectableHeaderErrors | read-only | mandatory | This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibit… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6 | NodemscLpDS3DS1 | |||
| 1.3.6.1.4.1.562.36.2.1.12.5.6.1 | TablemscLpDS3DS1RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS3DS1 components. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.1.1 | RowmscLpDS3DS1RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS3DS1 component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.1 | ColumnmscLpDS3DS1RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpDS3DS1 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.2 | ColumnmscLpDS3DS1ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.4 | ColumnmscLpDS3DS1StorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS3DS1 tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.10 | ColumnmscLpDS3DS1Index | not-accessible | mandatory | This variable represents the index for the mscLpDS3DS1 tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2 | NodemscLpDS3DS1Chan | |||
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.1 | TablemscLpDS3DS1ChanRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS3DS1Chan components. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1 | RowmscLpDS3DS1ChanRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS3DS1Chan component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.1 | ColumnmscLpDS3DS1ChanRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpDS3DS1Chan components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.2 | ColumnmscLpDS3DS1ChanComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.4 | ColumnmscLpDS3DS1ChanStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS3DS1Chan tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.10 | ColumnmscLpDS3DS1ChanIndex | not-accessible | mandatory | This variable represents the index for the mscLpDS3DS1Chan tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2 | NodemscLpDS3DS1ChanTest | |||
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1 | TablemscLpDS3DS1ChanTestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS3DS1ChanTest components. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1 | RowmscLpDS3DS1ChanTestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS3DS1ChanTest component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.1 | ColumnmscLpDS3DS1ChanTestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpDS3DS1ChanTest components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.2 | ColumnmscLpDS3DS1ChanTestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.4 | ColumnmscLpDS3DS1ChanTestStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS3DS1ChanTest tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.10 | ColumnmscLpDS3DS1ChanTestIndex | not-accessible | mandatory | This variable represents the index for the mscLpDS3DS1ChanTest tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10 | TablemscLpDS3DS1ChanTestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1 | RowmscLpDS3DS1ChanTestStateEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1ChanTestStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1.1 | ColumnmscLpDS3DS1ChanTestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1.2 | ColumnmscLpDS3DS1ChanTestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1.3 | ColumnmscLpDS3DS1ChanTestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11 | TablemscLpDS3DS1ChanTestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1 | RowmscLpDS3DS1ChanTestSetupEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1ChanTestSetupTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.1 | ColumnmscLpDS3DS1ChanTestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.2 | ColumnmscLpDS3DS1ChanTestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.3 | ColumnmscLpDS3DS1ChanTestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.4 | ColumnmscLpDS3DS1ChanTestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.5 | ColumnmscLpDS3DS1ChanTestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.6 | ColumnmscLpDS3DS1ChanTestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.7 | ColumnmscLpDS3DS1ChanTestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.8 | ColumnmscLpDS3DS1ChanTestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12 | TablemscLpDS3DS1ChanTestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1 | RowmscLpDS3DS1ChanTestResultsEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1ChanTestResultsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.1 | ColumnmscLpDS3DS1ChanTestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.2 | ColumnmscLpDS3DS1ChanTestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.3 | ColumnmscLpDS3DS1ChanTestCauseOfTermination | read-only | mandatory | This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. t… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.4 | ColumnmscLpDS3DS1ChanTestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.5 | ColumnmscLpDS3DS1ChanTestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.6 | ColumnmscLpDS3DS1ChanTestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.7 | ColumnmscLpDS3DS1ChanTestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.8 | ColumnmscLpDS3DS1ChanTestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.9 | ColumnmscLpDS3DS1ChanTestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.10 | ColumnmscLpDS3DS1ChanTestErroredFrmRx | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.11 | ColumnmscLpDS3DS1ChanTestBitErrorRate | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3 | NodemscLpDS3DS1ChanCell | |||
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1 | TablemscLpDS3DS1ChanCellRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS3DS1ChanCell components. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1 | RowmscLpDS3DS1ChanCellRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS3DS1ChanCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.1 | ColumnmscLpDS3DS1ChanCellRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpDS3DS1ChanCell components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.2 | ColumnmscLpDS3DS1ChanCellComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.4 | ColumnmscLpDS3DS1ChanCellStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS3DS1ChanCell tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.10 | ColumnmscLpDS3DS1ChanCellIndex | not-accessible | mandatory | This variable represents the index for the mscLpDS3DS1ChanCell tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10 | TablemscLpDS3DS1ChanCellProvTable | not-accessible | mandatory | This group contains the provisioning attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1 | RowmscLpDS3DS1ChanCellProvEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1ChanCellProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1.1 | ColumnmscLpDS3DS1ChanCellAlarmActDelay | read-write | mandatory | This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The tim… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1.2 | ColumnmscLpDS3DS1ChanCellScrambleCellPayload | read-write | mandatory | Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit p… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1.3 | ColumnmscLpDS3DS1ChanCellCorrectSingleBitHeaderErrors | read-write | mandatory | This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affecte… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.11 | TablemscLpDS3DS1ChanCellOperTable | not-accessible | mandatory | This group contains the common operational attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.11.1 | RowmscLpDS3DS1ChanCellOperEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1ChanCellOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.11.1.1 | ColumnmscLpDS3DS1ChanCellLcdAlarm | read-only | mandatory | This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been obser… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12 | TablemscLpDS3DS1ChanCellStatsTable | not-accessible | mandatory | This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1 | RowmscLpDS3DS1ChanCellStatsEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1ChanCellStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.1 | ColumnmscLpDS3DS1ChanCellUncorrectableHecErrors | read-only | mandatory | This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.2 | ColumnmscLpDS3DS1ChanCellSevErroredSec | read-only | mandatory | This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declar… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.3 | ColumnmscLpDS3DS1ChanCellReceiveCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a peri… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.4 | ColumnmscLpDS3DS1ChanCellTransmitCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a p… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.5 | ColumnmscLpDS3DS1ChanCellCorrectableHeaderErrors | read-only | mandatory | This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibit… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4 | NodemscLpDS3DS1ChanTc | |||
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1 | TablemscLpDS3DS1ChanTcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS3DS1ChanTc components. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1 | RowmscLpDS3DS1ChanTcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS3DS1ChanTc component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.1 | ColumnmscLpDS3DS1ChanTcRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpDS3DS1ChanTc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.2 | ColumnmscLpDS3DS1ChanTcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.4 | ColumnmscLpDS3DS1ChanTcStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS3DS1ChanTc tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.10 | ColumnmscLpDS3DS1ChanTcIndex | not-accessible | mandatory | This variable represents the index for the mscLpDS3DS1ChanTc tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10 | TablemscLpDS3DS1ChanTcProvTable | not-accessible | mandatory | This group contains all specific provisioning data for a Tc component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10.1 | RowmscLpDS3DS1ChanTcProvEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1ChanTcProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10.1.1 | ColumnmscLpDS3DS1ChanTcReplacementData | read-write | mandatory | This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacemen… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10.1.2 | ColumnmscLpDS3DS1ChanTcSignalOneDuration | read-write | mandatory | This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11 | TablemscLpDS3DS1ChanTcOpTable | not-accessible | mandatory | This group contains all specific operational data for a Tc component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11.1 | RowmscLpDS3DS1ChanTcOpEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1ChanTcOpTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11.1.1 | ColumnmscLpDS3DS1ChanTcIngressConditioning | read-only | mandatory | This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11.1.2 | ColumnmscLpDS3DS1ChanTcEgressConditioning | read-only | mandatory | This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards th… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398 | TablemscLpDS3DS1ChanTcSigOneTable | not-accessible | mandatory | This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The v… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398.1 | RowmscLpDS3DS1ChanTcSigOneEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1ChanTcSigOneTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398.1.1 | ColumnmscLpDS3DS1ChanTcSigOneIndex | not-accessible | mandatory | This variable represents the mscLpDS3DS1ChanTcSigOneTable specific index for the mscLpDS3DS1ChanTcSigOneTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398.1.2 | ColumnmscLpDS3DS1ChanTcSigOneValue | read-write | mandatory | This variable represents an individual value for the mscLpDS3DS1ChanTcSigOneTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399 | TablemscLpDS3DS1ChanTcSigTwoTable | not-accessible | mandatory | This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The v… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399.1 | RowmscLpDS3DS1ChanTcSigTwoEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1ChanTcSigTwoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399.1.1 | ColumnmscLpDS3DS1ChanTcSigTwoIndex | not-accessible | mandatory | This variable represents the mscLpDS3DS1ChanTcSigTwoTable specific index for the mscLpDS3DS1ChanTcSigTwoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399.1.2 | ColumnmscLpDS3DS1ChanTcSigTwoValue | read-write | mandatory | This variable represents an individual value for the mscLpDS3DS1ChanTcSigTwoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.10 | TablemscLpDS3DS1ChanProvTable | not-accessible | mandatory | This group contains all of the provisional data for a Channel component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1 | RowmscLpDS3DS1ChanProvEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1ChanProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1.1 | ColumnmscLpDS3DS1ChanTimeslots | read-write | mandatory | This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 fo… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1.2 | ColumnmscLpDS3DS1ChanTimeslotDataRate | read-write | mandatory | This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardles… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1.3 | ColumnmscLpDS3DS1ChanApplicationFramerName | read-write | mandatory | This attribute defines the link to the software stack. It defines which application is running on top of this hardware component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.11 | TablemscLpDS3DS1ChanCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.11.1 | RowmscLpDS3DS1ChanCidDataEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1ChanCidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.11.1.1 | ColumnmscLpDS3DS1ChanCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.12 | TablemscLpDS3DS1ChanIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.12.1 | RowmscLpDS3DS1ChanIfEntryEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1ChanIfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.12.1.1 | ColumnmscLpDS3DS1ChanIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.12.1.2 | ColumnmscLpDS3DS1ChanIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.13 | TablemscLpDS3DS1ChanOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.13.1 | RowmscLpDS3DS1ChanOperStatusEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1ChanOperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.13.1.1 | ColumnmscLpDS3DS1ChanSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14 | TablemscLpDS3DS1ChanStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1 | RowmscLpDS3DS1ChanStateEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1ChanStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.1 | ColumnmscLpDS3DS1ChanAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.2 | ColumnmscLpDS3DS1ChanOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.3 | ColumnmscLpDS3DS1ChanUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.4 | ColumnmscLpDS3DS1ChanAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.5 | ColumnmscLpDS3DS1ChanProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.6 | ColumnmscLpDS3DS1ChanControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.7 | ColumnmscLpDS3DS1ChanAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.8 | ColumnmscLpDS3DS1ChanStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.9 | ColumnmscLpDS3DS1ChanUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.15 | TablemscLpDS3DS1ChanOperTable | not-accessible | mandatory | This group contains all of the operational data for a Channel component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.15.1 | RowmscLpDS3DS1ChanOperEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1ChanOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.15.1.1 | ColumnmscLpDS3DS1ChanActualChannelSpeed | read-only | mandatory | This attribute displays the measured link speed of the Channel component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.16 | TablemscLpDS3DS1ChanAdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.16.1 | RowmscLpDS3DS1ChanAdminInfoEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1ChanAdminInfoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.16.1.1 | ColumnmscLpDS3DS1ChanVendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.2.16.1.2 | ColumnmscLpDS3DS1ChanCommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3 | NodemscLpDS3DS1Test | |||
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.1 | TablemscLpDS3DS1TestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS3DS1Test components. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1 | RowmscLpDS3DS1TestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS3DS1Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.1 | ColumnmscLpDS3DS1TestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpDS3DS1Test components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.2 | ColumnmscLpDS3DS1TestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.4 | ColumnmscLpDS3DS1TestStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS3DS1Test tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.10 | ColumnmscLpDS3DS1TestIndex | not-accessible | mandatory | This variable represents the index for the mscLpDS3DS1Test tables. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.10 | TablemscLpDS3DS1TestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1 | RowmscLpDS3DS1TestStateEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1TestStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1.1 | ColumnmscLpDS3DS1TestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1.2 | ColumnmscLpDS3DS1TestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1.3 | ColumnmscLpDS3DS1TestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11 | TablemscLpDS3DS1TestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1 | RowmscLpDS3DS1TestSetupEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1TestSetupTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.1 | ColumnmscLpDS3DS1TestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.2 | ColumnmscLpDS3DS1TestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.3 | ColumnmscLpDS3DS1TestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.4 | ColumnmscLpDS3DS1TestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.5 | ColumnmscLpDS3DS1TestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.6 | ColumnmscLpDS3DS1TestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.7 | ColumnmscLpDS3DS1TestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.8 | ColumnmscLpDS3DS1TestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12 | TablemscLpDS3DS1TestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1 | RowmscLpDS3DS1TestResultsEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1TestResultsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.1 | ColumnmscLpDS3DS1TestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.2 | ColumnmscLpDS3DS1TestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.3 | ColumnmscLpDS3DS1TestCauseOfTermination | read-only | mandatory | This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. t… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.4 | ColumnmscLpDS3DS1TestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.5 | ColumnmscLpDS3DS1TestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.6 | ColumnmscLpDS3DS1TestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.7 | ColumnmscLpDS3DS1TestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.8 | ColumnmscLpDS3DS1TestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.9 | ColumnmscLpDS3DS1TestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.10 | ColumnmscLpDS3DS1TestErroredFrmRx | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.11 | ColumnmscLpDS3DS1TestBitErrorRate | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.10 | TablemscLpDS3DS1ProvTable | not-accessible | mandatory | This group contains all of the provisioning data for a DS1 component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.10.1 | RowmscLpDS3DS1ProvEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1ProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.10.1.1 | ColumnmscLpDS3DS1LineType | read-write | mandatory | This attribute defines the framing of the DS1 tributary. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames p… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.10.1.2 | ColumnmscLpDS3DS1ZeroCoding | read-write | mandatory | This attribute defines the zero encoding on the DS1 tributary. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.10.1.3 | ColumnmscLpDS3DS1ClockingSource | read-write | mandatory | This attribute defines the source of the transmit clock for the DS1 tributary. When the clocking source is selected from local, the crystal on the port generat… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.11 | TablemscLpDS3DS1CidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.11.1 | RowmscLpDS3DS1CidDataEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1CidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.11.1.1 | ColumnmscLpDS3DS1CustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.12 | TablemscLpDS3DS1AdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.12.1 | RowmscLpDS3DS1AdminInfoEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1AdminInfoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.12.1.1 | ColumnmscLpDS3DS1Vendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.12.1.2 | ColumnmscLpDS3DS1CommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.13 | TablemscLpDS3DS1IfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.13.1 | RowmscLpDS3DS1IfEntryEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1IfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.13.1.1 | ColumnmscLpDS3DS1IfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.13.1.2 | ColumnmscLpDS3DS1IfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.14 | TablemscLpDS3DS1OperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.14.1 | RowmscLpDS3DS1OperStatusEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1OperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.14.1.1 | ColumnmscLpDS3DS1SnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.15 | TablemscLpDS3DS1StateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1 | RowmscLpDS3DS1StateEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1StateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.1 | ColumnmscLpDS3DS1AdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.2 | ColumnmscLpDS3DS1OperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.3 | ColumnmscLpDS3DS1UsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.4 | ColumnmscLpDS3DS1AvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.5 | ColumnmscLpDS3DS1ProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.6 | ColumnmscLpDS3DS1ControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.7 | ColumnmscLpDS3DS1AlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.8 | ColumnmscLpDS3DS1StandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.9 | ColumnmscLpDS3DS1UnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.16 | TablemscLpDS3DS1OperTable | not-accessible | mandatory | This group contains the common operational data for a component in a digital hierarchy interface. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.16.1 | RowmscLpDS3DS1OperEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1OperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.1 | ColumnmscLpDS3DS1RxAisAlarm | read-only | mandatory | This attribute indicates whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been obser… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.2 | ColumnmscLpDS3DS1LofAlarm | read-only | mandatory | This attribute indicates whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (2 out of 5 framing bits i… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.3 | ColumnmscLpDS3DS1RxRaiAlarm | read-only | mandatory | This attribute indicates whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.4 | ColumnmscLpDS3DS1TxAisAlarm | read-only | mandatory | This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the tributary is in … |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.5 | ColumnmscLpDS3DS1TxRaiAlarm | read-only | mandatory | This attribute indicates whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the tributary detects a LOF alarm conditio… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.17 | TablemscLpDS3DS1StatsTable | not-accessible | mandatory | This group contains the common statistical data for a component in a digital hierarchy interface. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1 | RowmscLpDS3DS1StatsEntry | not-accessible | mandatory | An entry in the mscLpDS3DS1StatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.1 | ColumnmscLpDS3DS1RunningTime | read-only | mandatory | This attribute counts the number of seconds since the tributary was activated. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.2 | ColumnmscLpDS3DS1ErrorFreeSec | read-only | mandatory | This attribute counts the number of seconds that the tributary has been in an error free state. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.3 | ColumnmscLpDS3DS1ErroredSec | read-only | mandatory | This attribute counts the number of errored seconds the tributary has counted since it was activated. An errored second is declared when a second with one or m… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.4 | ColumnmscLpDS3DS1SevErroredSec | read-only | mandatory | This attribute counts the number of severely errored seconds the tributary has counted since it was activated. A severely errored second occurs when a second w… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.5 | ColumnmscLpDS3DS1SevErroredFrmSec | read-only | mandatory | This attribute counts the number of severely errored framing seconds the tributary has counted since it was activated A severely errored framing second occurs … |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.6 | ColumnmscLpDS3DS1UnavailSec | read-only | mandatory | This attribute counts the total number of seconds that the tributary has been in an unavailable signal state. An unavailable signal state occurs at the onset o… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.7 | ColumnmscLpDS3DS1CrcErrors | read-only | mandatory | This attribute counts the total number of CRC-6 errors. These will only be counted when the lineType is esf. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.8 | ColumnmscLpDS3DS1FrmErrors | read-only | mandatory | This attribute counts the total number of frame errors. A frame error is an error in the framing bits. |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.9 | ColumnmscLpDS3DS1SlipErrors | read-only | mandatory | The total number of times that the line experienced a controlled frame slip. |
| 1.3.6.1.4.1.562.36.2.1.12.5.10 | TablemscLpDS3ProvTable | not-accessible | mandatory | This group contains all of the provisioning data for a DS3 component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.10.1 | RowmscLpDS3ProvEntry | not-accessible | mandatory | An entry in the mscLpDS3ProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.10.1.1 | ColumnmscLpDS3CbitParity | read-write | mandatory | This attribute indicates if C-Bit parity has been turned ON or OFF. The CBIT component will appear under the DS3 component when the cbitParity attribute is set… |
| 1.3.6.1.4.1.562.36.2.1.12.5.10.1.2 | ColumnmscLpDS3LineLength | read-write | mandatory | This attribute defines the line length for equalization calculations for the DS3 line. The range is between 0 and 450 feet (1 metre = 3.28 feet). Note: There a… |
| 1.3.6.1.4.1.562.36.2.1.12.5.10.1.3 | ColumnmscLpDS3ClockingSource | read-write | mandatory | This attribute defines the type of clocking source used for synchronizing the DS3 transmit clock: local means direct use of the local clock oscillator at its c… |
| 1.3.6.1.4.1.562.36.2.1.12.5.10.1.4 | ColumnmscLpDS3ApplicationFramerName | read-write | mandatory | This attribute defines the link to the software stack. It defines which application is running on top of the DS3 component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.10.1.5 | ColumnmscLpDS3Mapping | read-write | mandatory | This attribute indicates if ATM cells will be mapped directly into the DS3 payload, or whether PLCP mapping will be used. The PLCP component will appear under … |
| 1.3.6.1.4.1.562.36.2.1.12.5.11 | TablemscLpDS3CidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.12.5.11.1 | RowmscLpDS3CidDataEntry | not-accessible | mandatory | An entry in the mscLpDS3CidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.11.1.1 | ColumnmscLpDS3CustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.12.5.12 | TablemscLpDS3AdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.36.2.1.12.5.12.1 | RowmscLpDS3AdminInfoEntry | not-accessible | mandatory | An entry in the mscLpDS3AdminInfoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.12.1.1 | ColumnmscLpDS3Vendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.5.12.1.2 | ColumnmscLpDS3CommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.5.13 | TablemscLpDS3IfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.12.5.13.1 | RowmscLpDS3IfEntryEntry | not-accessible | mandatory | An entry in the mscLpDS3IfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.13.1.1 | ColumnmscLpDS3IfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.12.5.13.1.2 | ColumnmscLpDS3IfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.12.5.14 | TablemscLpDS3OperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.14.1 | RowmscLpDS3OperStatusEntry | not-accessible | mandatory | An entry in the mscLpDS3OperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.14.1.1 | ColumnmscLpDS3SnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.12.5.15 | TablemscLpDS3StateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.12.5.15.1 | RowmscLpDS3StateEntry | not-accessible | mandatory | An entry in the mscLpDS3StateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.15.1.1 | ColumnmscLpDS3AdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.5.15.1.2 | ColumnmscLpDS3OperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.5.15.1.3 | ColumnmscLpDS3UsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.5.15.1.4 | ColumnmscLpDS3AvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.12.5.15.1.5 | ColumnmscLpDS3ProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.12.5.15.1.6 | ColumnmscLpDS3ControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.12.5.15.1.7 | ColumnmscLpDS3AlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.12.5.15.1.8 | ColumnmscLpDS3StandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.12.5.15.1.9 | ColumnmscLpDS3UnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.12.5.16 | TablemscLpDS3OperTable | not-accessible | mandatory | This group contains the common operational data for DS3 component. |
| 1.3.6.1.4.1.562.36.2.1.12.5.16.1 | RowmscLpDS3OperEntry | not-accessible | mandatory | An entry in the mscLpDS3OperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.16.1.1 | ColumnmscLpDS3LosAlarm | read-only | mandatory | This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accu… |
| 1.3.6.1.4.1.562.36.2.1.12.5.16.1.2 | ColumnmscLpDS3LofAlarm | read-only | mandatory | This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects hav… |
| 1.3.6.1.4.1.562.36.2.1.12.5.16.1.3 | ColumnmscLpDS3RxAisAlarm | read-only | mandatory | This attribute displays whether an Alarm Indication Signal (AIS) alarm state has been entered. An AIS alarm state is entered when AIS defects have been observe… |
| 1.3.6.1.4.1.562.36.2.1.12.5.16.1.4 | ColumnmscLpDS3RxRaiAlarm | read-only | mandatory | This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. When not running the C-Bit Parity mode, the RAI alarm state is en… |
| 1.3.6.1.4.1.562.36.2.1.12.5.16.1.5 | ColumnmscLpDS3RxIdle | read-only | mandatory | This attribute displays whether an Idle failure condition has been reported on the DS3 port. An Idle condition is reported when DS3 Idle defects have been obse… |
| 1.3.6.1.4.1.562.36.2.1.12.5.16.1.6 | ColumnmscLpDS3TxAis | read-only | mandatory | This attribute displays whether an Alarm Indication Signal (AIS) alarm is being transmitted on the DS3 line. Currently, AIS is never transmitted by a Passport … |
| 1.3.6.1.4.1.562.36.2.1.12.5.16.1.7 | ColumnmscLpDS3TxRai | read-only | mandatory | When not running C-Bit Parity mode, this attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the DS3 com… |
| 1.3.6.1.4.1.562.36.2.1.12.5.16.1.8 | ColumnmscLpDS3TxIdle | read-only | mandatory | This attribute displays whether the DS3 Idle signal is transmitted over the outgoing line. DS3 Idle is sent when the DS3 component has been locked and not used… |
| 1.3.6.1.4.1.562.36.2.1.12.5.17 | TablemscLpDS3StatsTable | not-accessible | mandatory | This group contains the specific DS3 common operational data for a DS3 component. Each attribute type is a non-negative integer which monotonically increases u… |
| 1.3.6.1.4.1.562.36.2.1.12.5.17.1 | RowmscLpDS3StatsEntry | not-accessible | mandatory | An entry in the mscLpDS3StatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.5.17.1.1 | ColumnmscLpDS3RunningTime | read-only | mandatory | This attribute indicates the total number of seconds since the DS3 component has been activated and been in unlocked state or used for operational testing. All… |
| 1.3.6.1.4.1.562.36.2.1.12.5.17.1.2 | ColumnmscLpDS3ErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the DS3 port has been in an error free state. |
| 1.3.6.1.4.1.562.36.2.1.12.5.17.1.3 | ColumnmscLpDS3LineCodeViolations | read-only | mandatory | This attribute indicates the total number of Line Code Violations (LCV) detected. A DS3 Line Code Violation is a B3Zs error. LCV counting is inhibited for seco… |
| 1.3.6.1.4.1.562.36.2.1.12.5.17.1.4 | ColumnmscLpDS3LineErroredSec | read-only | mandatory | This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for second intervals containing one or more L… |
| 1.3.6.1.4.1.562.36.2.1.12.5.17.1.5 | ColumnmscLpDS3LineSevErroredSec | read-only | mandatory | This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing mo… |
| 1.3.6.1.4.1.562.36.2.1.12.5.17.1.6 | ColumnmscLpDS3LineLosSec | read-only | mandatory | This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more LOS… |
| 1.3.6.1.4.1.562.36.2.1.12.5.17.1.7 | ColumnmscLpDS3LineFailures | read-only | mandatory | This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotoni… |
| 1.3.6.1.4.1.562.36.2.1.12.5.17.1.8 | ColumnmscLpDS3PathCodeViolations | read-only | mandatory | This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a P-bit parity error, or possibly a frame error or a… |
| 1.3.6.1.4.1.562.36.2.1.12.5.17.1.9 | ColumnmscLpDS3PathErroredSec | read-only | mandatory | This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more … |
| 1.3.6.1.4.1.562.36.2.1.12.5.17.1.10 | ColumnmscLpDS3PathSevErroredSec | read-only | mandatory | This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing m… |
| 1.3.6.1.4.1.562.36.2.1.12.5.17.1.11 | ColumnmscLpDS3PathSefAisSec | read-only | mandatory | This attribute indicates the total number of SEF/AIS Seconds (PSASs). A PSAS is declared for second intervals containing one or more Severely Errored Frame (SE… |
| 1.3.6.1.4.1.562.36.2.1.12.5.17.1.12 | ColumnmscLpDS3PathUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 co… |
| 1.3.6.1.4.1.562.36.2.1.12.5.17.1.13 | ColumnmscLpDS3PathFailures | read-only | mandatory | This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which mono… |
| 1.3.6.1.4.1.562.36.2.1.12.6 | NodemscLpE3 | |||
| 1.3.6.1.4.1.562.36.2.1.12.6.1 | TablemscLpE3RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpE3 components. |
| 1.3.6.1.4.1.562.36.2.1.12.6.1.1 | RowmscLpE3RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpE3 component. |
| 1.3.6.1.4.1.562.36.2.1.12.6.1.1.1 | ColumnmscLpE3RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpE3 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.6.1.1.2 | ColumnmscLpE3ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.6.1.1.4 | ColumnmscLpE3StorageType | read-only | mandatory | This variable represents the storage type value for the mscLpE3 tables. |
| 1.3.6.1.4.1.562.36.2.1.12.6.1.1.10 | ColumnmscLpE3Index | not-accessible | mandatory | This variable represents the index for the mscLpE3 tables. |
| 1.3.6.1.4.1.562.36.2.1.12.6.2 | NodemscLpE3Test | |||
| 1.3.6.1.4.1.562.36.2.1.12.6.2.1 | TablemscLpE3TestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpE3Test components. |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.1.1 | RowmscLpE3TestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpE3Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.1 | ColumnmscLpE3TestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpE3Test components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.2 | ColumnmscLpE3TestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.4 | ColumnmscLpE3TestStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpE3Test tables. |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.10 | ColumnmscLpE3TestIndex | not-accessible | mandatory | This variable represents the index for the mscLpE3Test tables. |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.10 | TablemscLpE3TestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.10.1 | RowmscLpE3TestStateEntry | not-accessible | mandatory | An entry in the mscLpE3TestStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.10.1.1 | ColumnmscLpE3TestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.10.1.2 | ColumnmscLpE3TestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.10.1.3 | ColumnmscLpE3TestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.11 | TablemscLpE3TestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.11.1 | RowmscLpE3TestSetupEntry | not-accessible | mandatory | An entry in the mscLpE3TestSetupTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.1 | ColumnmscLpE3TestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.2 | ColumnmscLpE3TestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.3 | ColumnmscLpE3TestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.4 | ColumnmscLpE3TestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.5 | ColumnmscLpE3TestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.6 | ColumnmscLpE3TestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.7 | ColumnmscLpE3TestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.8 | ColumnmscLpE3TestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.12 | TablemscLpE3TestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1 | RowmscLpE3TestResultsEntry | not-accessible | mandatory | An entry in the mscLpE3TestResultsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.1 | ColumnmscLpE3TestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.2 | ColumnmscLpE3TestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.3 | ColumnmscLpE3TestCauseOfTermination | read-only | mandatory | This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. t… |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.4 | ColumnmscLpE3TestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.5 | ColumnmscLpE3TestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.6 | ColumnmscLpE3TestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.7 | ColumnmscLpE3TestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.8 | ColumnmscLpE3TestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.9 | ColumnmscLpE3TestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.10 | ColumnmscLpE3TestErroredFrmRx | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.11 | ColumnmscLpE3TestBitErrorRate | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.6.3 | NodemscLpE3G832 | |||
| 1.3.6.1.4.1.562.36.2.1.12.6.3.1 | TablemscLpE3G832RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpE3G832 components. |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.1.1 | RowmscLpE3G832RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpE3G832 component. |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.1 | ColumnmscLpE3G832RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpE3G832 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.2 | ColumnmscLpE3G832ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.4 | ColumnmscLpE3G832StorageType | read-only | mandatory | This variable represents the storage type value for the mscLpE3G832 tables. |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.10 | ColumnmscLpE3G832Index | not-accessible | mandatory | This variable represents the index for the mscLpE3G832 tables. |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.10 | TablemscLpE3G832ProvisionedTable | not-accessible | mandatory | This group contains the provisionable data for the G832 component. |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.10.1 | RowmscLpE3G832ProvisionedEntry | not-accessible | mandatory | An entry in the mscLpE3G832ProvisionedTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.10.1.1 | ColumnmscLpE3G832TrailTraceTransmitted | read-write | mandatory | This attribute indicates the E.164 address which is to be encoded in the trail access point identifier, which is transmitted using the Trail Trace (TR) field o… |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.10.1.2 | ColumnmscLpE3G832TrailTraceExpected | read-write | mandatory | This attribute indicates the E.164 address which is expected in the trail access point identifier, which is transmitted using the Trail Trace (TR) field of the… |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.11 | TablemscLpE3G832OperationalTable | not-accessible | mandatory | This group contains the operational data for the G832 component. |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.11.1 | RowmscLpE3G832OperationalEntry | not-accessible | mandatory | An entry in the mscLpE3G832OperationalTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.1 | ColumnmscLpE3G832UnexpectedPayloadType | read-only | mandatory | This attribute displays whether the Unexpected Payload Type (UPT) alarm state has been entered. The UPT alarm state is entered when UPT defects have been obser… |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.2 | ColumnmscLpE3G832TrailTraceMismatch | read-only | mandatory | This attribute displays whether the Trail Trace Mismatch (TTM) alarm state has been entered. The TTM alarm state is entered when TTM defects have been observed… |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.3 | ColumnmscLpE3G832TimingMarker | read-only | mandatory | Indicates whether or not the timing source at the far-end node is traceable to a Primary Reference Clock. The timingMarker indication is controlled by the timi… |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.4 | ColumnmscLpE3G832TrailTraceReceived | read-only | mandatory | This attribute indicates the 15 byte E.164 address which is currently being received in the trail trace (TR) field of the E3 G832 frame. If this attribute diff… |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.12 | TablemscLpE3G832StatsTable | not-accessible | mandatory | This group contains the statistical data for the G832 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a… |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.12.1 | RowmscLpE3G832StatsEntry | not-accessible | mandatory | An entry in the mscLpE3G832StatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.1 | ColumnmscLpE3G832FarEndErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the E3 line has not suffered any G832 errors. |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.2 | ColumnmscLpE3G832FarEndCodeViolations | read-only | mandatory | A count of E3 frames containing a Far-End Block Error (FEBE). A FEBE is reported over the FEBE bit each time the far-end terminal detects a BIP-8 error in a re… |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.3 | ColumnmscLpE3G832FarEndErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more Far-End Coding… |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.4 | ColumnmscLpE3G832FarEndSevErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Severely Errored Seconds (FESESs). A FESES is declared for second intervals containing more than 34 Far-En… |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.5 | ColumnmscLpE3G832FarEndSefAisSec | read-only | mandatory | This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more Far-End Receive F… |
| 1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.6 | ColumnmscLpE3G832FarEndUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the E3 far-end path is unavailable. The E3 far-end path becomes unavailable at the … |
| 1.3.6.1.4.1.562.36.2.1.12.6.4 | NodemscLpE3Plcp | |||
| 1.3.6.1.4.1.562.36.2.1.12.6.4.1 | TablemscLpE3PlcpRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpE3Plcp components. |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.1.1 | RowmscLpE3PlcpRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpE3Plcp component. |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.1 | ColumnmscLpE3PlcpRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpE3Plcp components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.2 | ColumnmscLpE3PlcpComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.4 | ColumnmscLpE3PlcpStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpE3Plcp tables. |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.10 | ColumnmscLpE3PlcpIndex | not-accessible | mandatory | This variable represents the index for the mscLpE3Plcp tables. |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.10 | TablemscLpE3PlcpOperationalTable | not-accessible | mandatory | This group contains the operational data for the PLCP component. |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.10.1 | RowmscLpE3PlcpOperationalEntry | not-accessible | mandatory | An entry in the mscLpE3PlcpOperationalTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.10.1.1 | ColumnmscLpE3PlcpLofAlarm | read-only | mandatory | This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for… |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.10.1.2 | ColumnmscLpE3PlcpRxRaiAlarm | read-only | mandatory | This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLC… |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.11 | TablemscLpE3PlcpStatsTable | not-accessible | mandatory | This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a… |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1 | RowmscLpE3PlcpStatsEntry | not-accessible | mandatory | An entry in the mscLpE3PlcpStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.1 | ColumnmscLpE3PlcpErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors. |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.2 | ColumnmscLpE3PlcpCodingViolations | read-only | mandatory | This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP fram… |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.3 | ColumnmscLpE3PlcpErroredSec | read-only | mandatory | This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was… |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.4 | ColumnmscLpE3PlcpSevErroredSec | read-only | mandatory | This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PL… |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.5 | ColumnmscLpE3PlcpSevErroredFramingSec | read-only | mandatory | This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out o… |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.6 | ColumnmscLpE3PlcpUnavailSec | read-only | mandatory | This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP … |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.7 | ColumnmscLpE3PlcpFarEndErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors. |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.8 | ColumnmscLpE3PlcpFarEndCodingViolations | read-only | mandatory | This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second inter… |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.9 | ColumnmscLpE3PlcpFarEndErroredSec | read-only | mandatory | This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second i… |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.10 | ColumnmscLpE3PlcpFarEndSevErroredSec | read-only | mandatory | This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second inter… |
| 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.11 | ColumnmscLpE3PlcpFarEndUnavailableSec | read-only | mandatory | This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP… |
| 1.3.6.1.4.1.562.36.2.1.12.6.5 | NodemscLpE3Cell | |||
| 1.3.6.1.4.1.562.36.2.1.12.6.5.1 | TablemscLpE3CellRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpE3Cell components. |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.1.1 | RowmscLpE3CellRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpE3Cell component. |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.1 | ColumnmscLpE3CellRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpE3Cell components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.2 | ColumnmscLpE3CellComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.4 | ColumnmscLpE3CellStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpE3Cell tables. |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.10 | ColumnmscLpE3CellIndex | not-accessible | mandatory | This variable represents the index for the mscLpE3Cell tables. |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.10 | TablemscLpE3CellProvTable | not-accessible | mandatory | This group contains the provisioning attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.10.1 | RowmscLpE3CellProvEntry | not-accessible | mandatory | An entry in the mscLpE3CellProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.10.1.1 | ColumnmscLpE3CellAlarmActDelay | read-write | mandatory | This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The tim… |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.10.1.2 | ColumnmscLpE3CellScrambleCellPayload | read-write | mandatory | Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit p… |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.10.1.3 | ColumnmscLpE3CellCorrectSingleBitHeaderErrors | read-write | mandatory | This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affecte… |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.11 | TablemscLpE3CellOperTable | not-accessible | mandatory | This group contains the common operational attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.11.1 | RowmscLpE3CellOperEntry | not-accessible | mandatory | An entry in the mscLpE3CellOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.11.1.1 | ColumnmscLpE3CellLcdAlarm | read-only | mandatory | This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been obser… |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.12 | TablemscLpE3CellStatsTable | not-accessible | mandatory | This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.12.1 | RowmscLpE3CellStatsEntry | not-accessible | mandatory | An entry in the mscLpE3CellStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.1 | ColumnmscLpE3CellUncorrectableHecErrors | read-only | mandatory | This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an… |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.2 | ColumnmscLpE3CellSevErroredSec | read-only | mandatory | This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declar… |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.3 | ColumnmscLpE3CellReceiveCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a peri… |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.4 | ColumnmscLpE3CellTransmitCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a p… |
| 1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.5 | ColumnmscLpE3CellCorrectableHeaderErrors | read-only | mandatory | This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibit… |
| 1.3.6.1.4.1.562.36.2.1.12.6.10 | TablemscLpE3ProvTable | not-accessible | mandatory | This group contains all of the provisioning data for a E3 component. |
| 1.3.6.1.4.1.562.36.2.1.12.6.10.1 | RowmscLpE3ProvEntry | not-accessible | mandatory | An entry in the mscLpE3ProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.10.1.1 | ColumnmscLpE3LineLength | read-write | mandatory | This attribute defines the line length for equalization calculations for the E3 line. The line length range is between 0 and 300 metres (1 metres = 3.28 feet). |
| 1.3.6.1.4.1.562.36.2.1.12.6.10.1.2 | ColumnmscLpE3ClockingSource | read-write | mandatory | This attribute defines the type of clocking source used for synchronizing the E3 transmit clock: local means direct use of the local clock oscillator at its ce… |
| 1.3.6.1.4.1.562.36.2.1.12.6.10.1.3 | ColumnmscLpE3ApplicationFramerName | read-write | mandatory | This attribute defines the link to the software stack. It defines which application is running on top of the E3 component. |
| 1.3.6.1.4.1.562.36.2.1.12.6.10.1.4 | ColumnmscLpE3Mapping | read-write | mandatory | This attribute indicates if ATM cells will be mapped directly into the E3 payload, or whether PLCP mapping will be used. The PLCP component will appear under t… |
| 1.3.6.1.4.1.562.36.2.1.12.6.10.1.5 | ColumnmscLpE3Framing | read-write | mandatory | This attribute indicates if the framing mode will be in accordance with the CCITT G.751 or G.832 specification. The G832 component will appear under the E3 com… |
| 1.3.6.1.4.1.562.36.2.1.12.6.10.1.6 | ColumnmscLpE3LinkAlarmActivationThreshold | read-write | mandatory | This attribute specifies the time interval between the detection of a sustained link failure and the activation of an alarm. It is provisionable for E3 cards. |
| 1.3.6.1.4.1.562.36.2.1.12.6.10.1.7 | ColumnmscLpE3LinkAlarmScanInterval | read-write | mandatory | This attribute specifies the alarm scan timer polling interval. It determines how frequently the status of the link is monitored after a first link error inter… |
| 1.3.6.1.4.1.562.36.2.1.12.6.11 | TablemscLpE3CidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.12.6.11.1 | RowmscLpE3CidDataEntry | not-accessible | mandatory | An entry in the mscLpE3CidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.11.1.1 | ColumnmscLpE3CustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.12.6.12 | TablemscLpE3AdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.36.2.1.12.6.12.1 | RowmscLpE3AdminInfoEntry | not-accessible | mandatory | An entry in the mscLpE3AdminInfoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.12.1.1 | ColumnmscLpE3Vendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.6.12.1.2 | ColumnmscLpE3CommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.6.13 | TablemscLpE3IfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.12.6.13.1 | RowmscLpE3IfEntryEntry | not-accessible | mandatory | An entry in the mscLpE3IfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.13.1.1 | ColumnmscLpE3IfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.12.6.13.1.2 | ColumnmscLpE3IfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.12.6.14 | TablemscLpE3OperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.12.6.14.1 | RowmscLpE3OperStatusEntry | not-accessible | mandatory | An entry in the mscLpE3OperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.14.1.1 | ColumnmscLpE3SnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.12.6.15 | TablemscLpE3StateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.12.6.15.1 | RowmscLpE3StateEntry | not-accessible | mandatory | An entry in the mscLpE3StateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.15.1.1 | ColumnmscLpE3AdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.6.15.1.2 | ColumnmscLpE3OperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.6.15.1.3 | ColumnmscLpE3UsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.6.15.1.4 | ColumnmscLpE3AvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.12.6.15.1.5 | ColumnmscLpE3ProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.12.6.15.1.6 | ColumnmscLpE3ControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.12.6.15.1.7 | ColumnmscLpE3AlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.12.6.15.1.8 | ColumnmscLpE3StandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.12.6.15.1.9 | ColumnmscLpE3UnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.12.6.16 | TablemscLpE3OperTable | not-accessible | mandatory | This group contains the common operational data for E3 component. |
| 1.3.6.1.4.1.562.36.2.1.12.6.16.1 | RowmscLpE3OperEntry | not-accessible | mandatory | An entry in the mscLpE3OperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.16.1.1 | ColumnmscLpE3LosAlarm | read-only | mandatory | This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects has been observed and accum… |
| 1.3.6.1.4.1.562.36.2.1.12.6.16.1.2 | ColumnmscLpE3LofAlarm | read-only | mandatory | This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects hav… |
| 1.3.6.1.4.1.562.36.2.1.12.6.16.1.3 | ColumnmscLpE3RxAisAlarm | read-only | mandatory | This attribute displays whether an Alarm Indication Signal (AIS) alarm when state has been entered. An AIS alarm state is entered when AIS defects have been ob… |
| 1.3.6.1.4.1.562.36.2.1.12.6.16.1.4 | ColumnmscLpE3RxRaiAlarm | read-only | mandatory | This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. A RAI alarm state is entered when far- end SEF/AIS defects (or Fa… |
| 1.3.6.1.4.1.562.36.2.1.12.6.16.1.5 | ColumnmscLpE3TxAis | read-only | mandatory | This attribute displays whether an AIS alarm is being transmitted on the E3 line. AIS is transmitted on the outgoing line when the E3 component is locked and n… |
| 1.3.6.1.4.1.562.36.2.1.12.6.16.1.6 | ColumnmscLpE3TxRai | read-only | mandatory | This attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the E3 component has been unlocked or used in o… |
| 1.3.6.1.4.1.562.36.2.1.12.6.17 | TablemscLpE3StatsTable | not-accessible | mandatory | This group contains the common operational data for E3 component. Each attribute type is a non-negative integer which monotonically increases until it reaches … |
| 1.3.6.1.4.1.562.36.2.1.12.6.17.1 | RowmscLpE3StatsEntry | not-accessible | mandatory | An entry in the mscLpE3StatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.6.17.1.1 | ColumnmscLpE3RunningTime | read-only | mandatory | This attribute indicates the total number of seconds since the E3 component has been activated and been in unlocked state or used for operational testing. All … |
| 1.3.6.1.4.1.562.36.2.1.12.6.17.1.2 | ColumnmscLpE3ErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the E3 port has been in an error free state. |
| 1.3.6.1.4.1.562.36.2.1.12.6.17.1.3 | ColumnmscLpE3LineCodeViolations | read-only | mandatory | This attribute indicates the total number of Line Code Violations (LCV) detected. An E3 Line Code Violation is an HDB3 coded signal error. LCV counting is inhi… |
| 1.3.6.1.4.1.562.36.2.1.12.6.17.1.4 | ColumnmscLpE3LineErroredSec | read-only | mandatory | This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for interval seconds containing one or more L… |
| 1.3.6.1.4.1.562.36.2.1.12.6.17.1.5 | ColumnmscLpE3LineSevErroredSec | read-only | mandatory | This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing mo… |
| 1.3.6.1.4.1.562.36.2.1.12.6.17.1.6 | ColumnmscLpE3LineLosSec | read-only | mandatory | This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more Los… |
| 1.3.6.1.4.1.562.36.2.1.12.6.17.1.7 | ColumnmscLpE3LineFailures | read-only | mandatory | This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotoni… |
| 1.3.6.1.4.1.562.36.2.1.12.6.17.1.8 | ColumnmscLpE3PathCodeViolations | read-only | mandatory | This attribute indicates the total number of Path Code Violations (PCV) detected. An E3 PCV is an error in the Frame Alignment (FA) signal, or, in G.832 Framin… |
| 1.3.6.1.4.1.562.36.2.1.12.6.17.1.9 | ColumnmscLpE3PathErroredSec | read-only | mandatory | This attribute indicates the total number of Path Errored Seconds (PES) that have been counted. A PES is declared for second intervals containing one or more P… |
| 1.3.6.1.4.1.562.36.2.1.12.6.17.1.10 | ColumnmscLpE3PathSevErroredSec | read-only | mandatory | This attribute indicates the total number of Path Severely Errored Seconds (PSES) that have been counted. A PSES is declared for second intervals containing mo… |
| 1.3.6.1.4.1.562.36.2.1.12.6.17.1.11 | ColumnmscLpE3PathSefAisSec | read-only | mandatory | This attribute indicates the total number of Path SEF/AIS Seconds (PSAS). A PSAS is declared for second intervals containing one or more Severely Errored Frame… |
| 1.3.6.1.4.1.562.36.2.1.12.6.17.1.12 | ColumnmscLpE3PathUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the E3 path is unavailable. The E3 path becomes unavailable at the onset of 10 cons… |
| 1.3.6.1.4.1.562.36.2.1.12.6.17.1.13 | ColumnmscLpE3PathFailures | read-only | mandatory | This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which mono… |
| 1.3.6.1.4.1.562.36.2.1.12.7 | NodemscLpDS1 | |||
| 1.3.6.1.4.1.562.36.2.1.12.7.1 | TablemscLpDS1RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS1 components. |
| 1.3.6.1.4.1.562.36.2.1.12.7.1.1 | RowmscLpDS1RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS1 component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.1.1.1 | ColumnmscLpDS1RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpDS1 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.7.1.1.2 | ColumnmscLpDS1ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.7.1.1.4 | ColumnmscLpDS1StorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS1 tables. |
| 1.3.6.1.4.1.562.36.2.1.12.7.1.1.10 | ColumnmscLpDS1Index | not-accessible | mandatory | This variable represents the index for the mscLpDS1 tables. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2 | NodemscLpDS1Chan | |||
| 1.3.6.1.4.1.562.36.2.1.12.7.2.1 | TablemscLpDS1ChanRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS1Chan components. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.1.1 | RowmscLpDS1ChanRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS1Chan component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.1 | ColumnmscLpDS1ChanRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpDS1Chan components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.2 | ColumnmscLpDS1ChanComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.4 | ColumnmscLpDS1ChanStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS1Chan tables. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.10 | ColumnmscLpDS1ChanIndex | not-accessible | mandatory | This variable represents the index for the mscLpDS1Chan tables. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2 | NodemscLpDS1ChanTest | |||
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.1 | TablemscLpDS1ChanTestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS1ChanTest components. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1 | RowmscLpDS1ChanTestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS1ChanTest component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.1 | ColumnmscLpDS1ChanTestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpDS1ChanTest components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.2 | ColumnmscLpDS1ChanTestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.4 | ColumnmscLpDS1ChanTestStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS1ChanTest tables. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.10 | ColumnmscLpDS1ChanTestIndex | not-accessible | mandatory | This variable represents the index for the mscLpDS1ChanTest tables. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.10 | TablemscLpDS1ChanTestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1 | RowmscLpDS1ChanTestStateEntry | not-accessible | mandatory | An entry in the mscLpDS1ChanTestStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1.1 | ColumnmscLpDS1ChanTestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1.2 | ColumnmscLpDS1ChanTestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1.3 | ColumnmscLpDS1ChanTestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11 | TablemscLpDS1ChanTestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1 | RowmscLpDS1ChanTestSetupEntry | not-accessible | mandatory | An entry in the mscLpDS1ChanTestSetupTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.1 | ColumnmscLpDS1ChanTestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.2 | ColumnmscLpDS1ChanTestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.3 | ColumnmscLpDS1ChanTestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.4 | ColumnmscLpDS1ChanTestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.5 | ColumnmscLpDS1ChanTestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.6 | ColumnmscLpDS1ChanTestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.7 | ColumnmscLpDS1ChanTestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.8 | ColumnmscLpDS1ChanTestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12 | TablemscLpDS1ChanTestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1 | RowmscLpDS1ChanTestResultsEntry | not-accessible | mandatory | An entry in the mscLpDS1ChanTestResultsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.1 | ColumnmscLpDS1ChanTestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.2 | ColumnmscLpDS1ChanTestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.3 | ColumnmscLpDS1ChanTestCauseOfTermination | read-only | mandatory | This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. t… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.4 | ColumnmscLpDS1ChanTestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.5 | ColumnmscLpDS1ChanTestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.6 | ColumnmscLpDS1ChanTestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.7 | ColumnmscLpDS1ChanTestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.8 | ColumnmscLpDS1ChanTestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.9 | ColumnmscLpDS1ChanTestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.10 | ColumnmscLpDS1ChanTestErroredFrmRx | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.11 | ColumnmscLpDS1ChanTestBitErrorRate | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3 | NodemscLpDS1ChanCell | |||
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.1 | TablemscLpDS1ChanCellRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS1ChanCell components. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1 | RowmscLpDS1ChanCellRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS1ChanCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.1 | ColumnmscLpDS1ChanCellRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpDS1ChanCell components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.2 | ColumnmscLpDS1ChanCellComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.4 | ColumnmscLpDS1ChanCellStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS1ChanCell tables. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.10 | ColumnmscLpDS1ChanCellIndex | not-accessible | mandatory | This variable represents the index for the mscLpDS1ChanCell tables. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.10 | TablemscLpDS1ChanCellProvTable | not-accessible | mandatory | This group contains the provisioning attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1 | RowmscLpDS1ChanCellProvEntry | not-accessible | mandatory | An entry in the mscLpDS1ChanCellProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1.1 | ColumnmscLpDS1ChanCellAlarmActDelay | read-write | mandatory | This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The tim… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1.2 | ColumnmscLpDS1ChanCellScrambleCellPayload | read-write | mandatory | Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit p… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1.3 | ColumnmscLpDS1ChanCellCorrectSingleBitHeaderErrors | read-write | mandatory | This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affecte… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.11 | TablemscLpDS1ChanCellOperTable | not-accessible | mandatory | This group contains the common operational attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.11.1 | RowmscLpDS1ChanCellOperEntry | not-accessible | mandatory | An entry in the mscLpDS1ChanCellOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.11.1.1 | ColumnmscLpDS1ChanCellLcdAlarm | read-only | mandatory | This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been obser… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.12 | TablemscLpDS1ChanCellStatsTable | not-accessible | mandatory | This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1 | RowmscLpDS1ChanCellStatsEntry | not-accessible | mandatory | An entry in the mscLpDS1ChanCellStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.1 | ColumnmscLpDS1ChanCellUncorrectableHecErrors | read-only | mandatory | This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.2 | ColumnmscLpDS1ChanCellSevErroredSec | read-only | mandatory | This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declar… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.3 | ColumnmscLpDS1ChanCellReceiveCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a peri… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.4 | ColumnmscLpDS1ChanCellTransmitCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a p… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.5 | ColumnmscLpDS1ChanCellCorrectableHeaderErrors | read-only | mandatory | This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibit… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4 | NodemscLpDS1ChanTc | |||
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.1 | TablemscLpDS1ChanTcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS1ChanTc components. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1 | RowmscLpDS1ChanTcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS1ChanTc component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.1 | ColumnmscLpDS1ChanTcRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpDS1ChanTc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.2 | ColumnmscLpDS1ChanTcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.4 | ColumnmscLpDS1ChanTcStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS1ChanTc tables. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.10 | ColumnmscLpDS1ChanTcIndex | not-accessible | mandatory | This variable represents the index for the mscLpDS1ChanTc tables. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.10 | TablemscLpDS1ChanTcProvTable | not-accessible | mandatory | This group contains all specific provisioning data for a Tc component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.10.1 | RowmscLpDS1ChanTcProvEntry | not-accessible | mandatory | An entry in the mscLpDS1ChanTcProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.10.1.1 | ColumnmscLpDS1ChanTcReplacementData | read-write | mandatory | This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacemen… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.10.1.2 | ColumnmscLpDS1ChanTcSignalOneDuration | read-write | mandatory | This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.11 | TablemscLpDS1ChanTcOpTable | not-accessible | mandatory | This group contains all specific operational data for a Tc component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.11.1 | RowmscLpDS1ChanTcOpEntry | not-accessible | mandatory | An entry in the mscLpDS1ChanTcOpTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.11.1.1 | ColumnmscLpDS1ChanTcIngressConditioning | read-only | mandatory | This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.11.1.2 | ColumnmscLpDS1ChanTcEgressConditioning | read-only | mandatory | This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards th… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.398 | TablemscLpDS1ChanTcSigOneTable | not-accessible | mandatory | This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The v… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.398.1 | RowmscLpDS1ChanTcSigOneEntry | not-accessible | mandatory | An entry in the mscLpDS1ChanTcSigOneTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.398.1.1 | ColumnmscLpDS1ChanTcSigOneIndex | not-accessible | mandatory | This variable represents the mscLpDS1ChanTcSigOneTable specific index for the mscLpDS1ChanTcSigOneTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.398.1.2 | ColumnmscLpDS1ChanTcSigOneValue | read-write | mandatory | This variable represents an individual value for the mscLpDS1ChanTcSigOneTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.399 | TablemscLpDS1ChanTcSigTwoTable | not-accessible | mandatory | This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The v… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.399.1 | RowmscLpDS1ChanTcSigTwoEntry | not-accessible | mandatory | An entry in the mscLpDS1ChanTcSigTwoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.399.1.1 | ColumnmscLpDS1ChanTcSigTwoIndex | not-accessible | mandatory | This variable represents the mscLpDS1ChanTcSigTwoTable specific index for the mscLpDS1ChanTcSigTwoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.4.399.1.2 | ColumnmscLpDS1ChanTcSigTwoValue | read-write | mandatory | This variable represents an individual value for the mscLpDS1ChanTcSigTwoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.10 | TablemscLpDS1ChanProvTable | not-accessible | mandatory | This group contains all of the provisional data for a Channel component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.10.1 | RowmscLpDS1ChanProvEntry | not-accessible | mandatory | An entry in the mscLpDS1ChanProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.10.1.1 | ColumnmscLpDS1ChanTimeslots | read-write | mandatory | This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 fo… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.10.1.2 | ColumnmscLpDS1ChanTimeslotDataRate | read-write | mandatory | This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardles… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.10.1.3 | ColumnmscLpDS1ChanApplicationFramerName | read-write | mandatory | This attribute defines the link to the software stack. It defines which application is running on top of this hardware component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.11 | TablemscLpDS1ChanCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.11.1 | RowmscLpDS1ChanCidDataEntry | not-accessible | mandatory | An entry in the mscLpDS1ChanCidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.11.1.1 | ColumnmscLpDS1ChanCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.12 | TablemscLpDS1ChanIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.12.1 | RowmscLpDS1ChanIfEntryEntry | not-accessible | mandatory | An entry in the mscLpDS1ChanIfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.12.1.1 | ColumnmscLpDS1ChanIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.12.1.2 | ColumnmscLpDS1ChanIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.13 | TablemscLpDS1ChanOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.13.1 | RowmscLpDS1ChanOperStatusEntry | not-accessible | mandatory | An entry in the mscLpDS1ChanOperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.13.1.1 | ColumnmscLpDS1ChanSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.14 | TablemscLpDS1ChanStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1 | RowmscLpDS1ChanStateEntry | not-accessible | mandatory | An entry in the mscLpDS1ChanStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.1 | ColumnmscLpDS1ChanAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.2 | ColumnmscLpDS1ChanOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.3 | ColumnmscLpDS1ChanUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.4 | ColumnmscLpDS1ChanAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.5 | ColumnmscLpDS1ChanProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.6 | ColumnmscLpDS1ChanControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.7 | ColumnmscLpDS1ChanAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.8 | ColumnmscLpDS1ChanStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.9 | ColumnmscLpDS1ChanUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.15 | TablemscLpDS1ChanOperTable | not-accessible | mandatory | This group contains all of the operational data for a Channel component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.15.1 | RowmscLpDS1ChanOperEntry | not-accessible | mandatory | An entry in the mscLpDS1ChanOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.15.1.1 | ColumnmscLpDS1ChanActualChannelSpeed | read-only | mandatory | This attribute displays the measured link speed of the Channel component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.16 | TablemscLpDS1ChanAdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.16.1 | RowmscLpDS1ChanAdminInfoEntry | not-accessible | mandatory | An entry in the mscLpDS1ChanAdminInfoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.16.1.1 | ColumnmscLpDS1ChanVendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.7.2.16.1.2 | ColumnmscLpDS1ChanCommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.7.3 | NodemscLpDS1Test | |||
| 1.3.6.1.4.1.562.36.2.1.12.7.3.1 | TablemscLpDS1TestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS1Test components. |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.1.1 | RowmscLpDS1TestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS1Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.1 | ColumnmscLpDS1TestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpDS1Test components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.2 | ColumnmscLpDS1TestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.4 | ColumnmscLpDS1TestStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS1Test tables. |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.10 | ColumnmscLpDS1TestIndex | not-accessible | mandatory | This variable represents the index for the mscLpDS1Test tables. |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.10 | TablemscLpDS1TestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.10.1 | RowmscLpDS1TestStateEntry | not-accessible | mandatory | An entry in the mscLpDS1TestStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.10.1.1 | ColumnmscLpDS1TestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.10.1.2 | ColumnmscLpDS1TestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.10.1.3 | ColumnmscLpDS1TestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.11 | TablemscLpDS1TestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.11.1 | RowmscLpDS1TestSetupEntry | not-accessible | mandatory | An entry in the mscLpDS1TestSetupTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.1 | ColumnmscLpDS1TestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.2 | ColumnmscLpDS1TestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.3 | ColumnmscLpDS1TestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.4 | ColumnmscLpDS1TestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.5 | ColumnmscLpDS1TestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.6 | ColumnmscLpDS1TestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.7 | ColumnmscLpDS1TestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.8 | ColumnmscLpDS1TestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.12 | TablemscLpDS1TestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1 | RowmscLpDS1TestResultsEntry | not-accessible | mandatory | An entry in the mscLpDS1TestResultsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.1 | ColumnmscLpDS1TestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.2 | ColumnmscLpDS1TestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.3 | ColumnmscLpDS1TestCauseOfTermination | read-only | mandatory | This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. t… |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.4 | ColumnmscLpDS1TestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.5 | ColumnmscLpDS1TestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.6 | ColumnmscLpDS1TestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.7 | ColumnmscLpDS1TestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.8 | ColumnmscLpDS1TestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.9 | ColumnmscLpDS1TestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.10 | ColumnmscLpDS1TestErroredFrmRx | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.11 | ColumnmscLpDS1TestBitErrorRate | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.7.4 | NodemscLpDS1Dsp | |||
| 1.3.6.1.4.1.562.36.2.1.12.7.4.1 | TablemscLpDS1DspRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS1Dsp components. |
| 1.3.6.1.4.1.562.36.2.1.12.7.4.1.1 | RowmscLpDS1DspRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS1Dsp component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.1 | ColumnmscLpDS1DspRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpDS1Dsp components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.2 | ColumnmscLpDS1DspComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.4 | ColumnmscLpDS1DspStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS1Dsp tables. |
| 1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.10 | ColumnmscLpDS1DspIndex | not-accessible | mandatory | This variable represents the index for the mscLpDS1Dsp tables. |
| 1.3.6.1.4.1.562.36.2.1.12.7.5 | NodemscLpDS1Audio | |||
| 1.3.6.1.4.1.562.36.2.1.12.7.5.1 | TablemscLpDS1AudioRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpDS1Audio components. |
| 1.3.6.1.4.1.562.36.2.1.12.7.5.1.1 | RowmscLpDS1AudioRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpDS1Audio component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.1 | ColumnmscLpDS1AudioRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpDS1Audio components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.2 | ColumnmscLpDS1AudioComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.4 | ColumnmscLpDS1AudioStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpDS1Audio tables. |
| 1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.10 | ColumnmscLpDS1AudioIndex | not-accessible | mandatory | This variable represents the index for the mscLpDS1Audio tables. |
| 1.3.6.1.4.1.562.36.2.1.12.7.10 | TablemscLpDS1ProvTable | not-accessible | mandatory | This group contains all of the provisioning data for a DS1 component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.10.1 | RowmscLpDS1ProvEntry | not-accessible | mandatory | An entry in the mscLpDS1ProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.10.1.1 | ColumnmscLpDS1LineType | read-write | mandatory | This attribute defines the framing of the DS1 line. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames per mu… |
| 1.3.6.1.4.1.562.36.2.1.12.7.10.1.2 | ColumnmscLpDS1ZeroCoding | read-write | mandatory | This attribute defines the zero encoding on the DS1 line. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the avai… |
| 1.3.6.1.4.1.562.36.2.1.12.7.10.1.3 | ColumnmscLpDS1ClockingSource | read-write | mandatory | This attribute defines the source of the transmit clock for the DS1 line. When local is selected, the crystal on the port generates the clocking for the line. … |
| 1.3.6.1.4.1.562.36.2.1.12.7.10.1.4 | ColumnmscLpDS1RaiAlarmType | read-write | mandatory | This attribute defines the method of sending a RAI (Remote Alarm Indication) alarm on a DS1 line. When SBit is selected, RAI alarm is sent by setting the S bit… |
| 1.3.6.1.4.1.562.36.2.1.12.7.10.1.5 | ColumnmscLpDS1LineLength | read-write | mandatory | This attribute defines the line length (in feet) for equalization calculations for the DS1 line. The value ranges between 0-655. For 8pDS1Atm cards the actual … |
| 1.3.6.1.4.1.562.36.2.1.12.7.11 | TablemscLpDS1CidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.12.7.11.1 | RowmscLpDS1CidDataEntry | not-accessible | mandatory | An entry in the mscLpDS1CidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.11.1.1 | ColumnmscLpDS1CustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.12.7.12 | TablemscLpDS1AdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.36.2.1.12.7.12.1 | RowmscLpDS1AdminInfoEntry | not-accessible | mandatory | An entry in the mscLpDS1AdminInfoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.12.1.1 | ColumnmscLpDS1Vendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.7.12.1.2 | ColumnmscLpDS1CommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.7.13 | TablemscLpDS1IfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.12.7.13.1 | RowmscLpDS1IfEntryEntry | not-accessible | mandatory | An entry in the mscLpDS1IfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.13.1.1 | ColumnmscLpDS1IfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.12.7.13.1.2 | ColumnmscLpDS1IfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.12.7.14 | TablemscLpDS1OperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.12.7.14.1 | RowmscLpDS1OperStatusEntry | not-accessible | mandatory | An entry in the mscLpDS1OperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.14.1.1 | ColumnmscLpDS1SnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.12.7.15 | TablemscLpDS1StateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.12.7.15.1 | RowmscLpDS1StateEntry | not-accessible | mandatory | An entry in the mscLpDS1StateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.15.1.1 | ColumnmscLpDS1AdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.7.15.1.2 | ColumnmscLpDS1OperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.7.15.1.3 | ColumnmscLpDS1UsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.7.15.1.4 | ColumnmscLpDS1AvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.12.7.15.1.5 | ColumnmscLpDS1ProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.12.7.15.1.6 | ColumnmscLpDS1ControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.12.7.15.1.7 | ColumnmscLpDS1AlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.12.7.15.1.8 | ColumnmscLpDS1StandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.12.7.15.1.9 | ColumnmscLpDS1UnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.12.7.16 | TablemscLpDS1OperTable | not-accessible | mandatory | This group contains the common operational data for a component in a digital hierarchy interface. |
| 1.3.6.1.4.1.562.36.2.1.12.7.16.1 | RowmscLpDS1OperEntry | not-accessible | mandatory | An entry in the mscLpDS1OperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.16.1.1 | ColumnmscLpDS1LosAlarm | read-only | mandatory | This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulat… |
| 1.3.6.1.4.1.562.36.2.1.12.7.16.1.2 | ColumnmscLpDS1RxAisAlarm | read-only | mandatory | This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observ… |
| 1.3.6.1.4.1.562.36.2.1.12.7.16.1.3 | ColumnmscLpDS1LofAlarm | read-only | mandatory | This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framin… |
| 1.3.6.1.4.1.562.36.2.1.12.7.16.1.4 | ColumnmscLpDS1RxRaiAlarm | read-only | mandatory | This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has … |
| 1.3.6.1.4.1.562.36.2.1.12.7.16.1.5 | ColumnmscLpDS1TxAisAlarm | read-only | mandatory | This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a lock… |
| 1.3.6.1.4.1.562.36.2.1.12.7.16.1.6 | ColumnmscLpDS1TxRaiAlarm | read-only | mandatory | This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for… |
| 1.3.6.1.4.1.562.36.2.1.12.7.17 | TablemscLpDS1StatsTable | not-accessible | mandatory | This group contains the common statistical data for a component in a digital hierarchy interface. |
| 1.3.6.1.4.1.562.36.2.1.12.7.17.1 | RowmscLpDS1StatsEntry | not-accessible | mandatory | An entry in the mscLpDS1StatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.7.17.1.1 | ColumnmscLpDS1RunningTime | read-only | mandatory | The number of seconds since the port component was activated. |
| 1.3.6.1.4.1.562.36.2.1.12.7.17.1.2 | ColumnmscLpDS1ErrorFreeSec | read-only | mandatory | The number of seconds that the port has been in an error free state. |
| 1.3.6.1.4.1.562.36.2.1.12.7.17.1.3 | ColumnmscLpDS1ErroredSec | read-only | mandatory | An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may… |
| 1.3.6.1.4.1.562.36.2.1.12.7.17.1.4 | ColumnmscLpDS1SevErroredSec | read-only | mandatory | A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs. |
| 1.3.6.1.4.1.562.36.2.1.12.7.17.1.5 | ColumnmscLpDS1SevErroredFrmSec | read-only | mandatory | A severely errored framing second occurs when a second with one or more Out Of Frame events occurs. |
| 1.3.6.1.4.1.562.36.2.1.12.7.17.1.6 | ColumnmscLpDS1UnavailSec | read-only | mandatory | The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Er… |
| 1.3.6.1.4.1.562.36.2.1.12.7.17.1.7 | ColumnmscLpDS1BpvErrors | read-only | mandatory | The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line. |
| 1.3.6.1.4.1.562.36.2.1.12.7.17.1.8 | ColumnmscLpDS1CrcErrors | read-only | mandatory | If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, i… |
| 1.3.6.1.4.1.562.36.2.1.12.7.17.1.9 | ColumnmscLpDS1FrmErrors | read-only | mandatory | The current count of frame errors. A frame error is an error in the framing bits |
| 1.3.6.1.4.1.562.36.2.1.12.7.17.1.10 | ColumnmscLpDS1LosStateChanges | read-only | mandatory | The total number of times that the line lost signal. |
| 1.3.6.1.4.1.562.36.2.1.12.7.17.1.11 | ColumnmscLpDS1SlipErrors | read-only | mandatory | The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V… |
| 1.3.6.1.4.1.562.36.2.1.12.8 | NodemscLpE1 | |||
| 1.3.6.1.4.1.562.36.2.1.12.8.1 | TablemscLpE1RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpE1 components. |
| 1.3.6.1.4.1.562.36.2.1.12.8.1.1 | RowmscLpE1RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpE1 component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.1.1.1 | ColumnmscLpE1RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpE1 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.8.1.1.2 | ColumnmscLpE1ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.8.1.1.4 | ColumnmscLpE1StorageType | read-only | mandatory | This variable represents the storage type value for the mscLpE1 tables. |
| 1.3.6.1.4.1.562.36.2.1.12.8.1.1.10 | ColumnmscLpE1Index | not-accessible | mandatory | This variable represents the index for the mscLpE1 tables. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2 | NodemscLpE1Chan | |||
| 1.3.6.1.4.1.562.36.2.1.12.8.2.1 | TablemscLpE1ChanRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpE1Chan components. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.1.1 | RowmscLpE1ChanRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpE1Chan component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.1 | ColumnmscLpE1ChanRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpE1Chan components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.2 | ColumnmscLpE1ChanComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.4 | ColumnmscLpE1ChanStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpE1Chan tables. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.10 | ColumnmscLpE1ChanIndex | not-accessible | mandatory | This variable represents the index for the mscLpE1Chan tables. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2 | NodemscLpE1ChanTest | |||
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.1 | TablemscLpE1ChanTestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpE1ChanTest components. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1 | RowmscLpE1ChanTestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpE1ChanTest component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.1 | ColumnmscLpE1ChanTestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpE1ChanTest components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.2 | ColumnmscLpE1ChanTestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.4 | ColumnmscLpE1ChanTestStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpE1ChanTest tables. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.10 | ColumnmscLpE1ChanTestIndex | not-accessible | mandatory | This variable represents the index for the mscLpE1ChanTest tables. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.10 | TablemscLpE1ChanTestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1 | RowmscLpE1ChanTestStateEntry | not-accessible | mandatory | An entry in the mscLpE1ChanTestStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1.1 | ColumnmscLpE1ChanTestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1.2 | ColumnmscLpE1ChanTestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1.3 | ColumnmscLpE1ChanTestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11 | TablemscLpE1ChanTestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1 | RowmscLpE1ChanTestSetupEntry | not-accessible | mandatory | An entry in the mscLpE1ChanTestSetupTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.1 | ColumnmscLpE1ChanTestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.2 | ColumnmscLpE1ChanTestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.3 | ColumnmscLpE1ChanTestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.4 | ColumnmscLpE1ChanTestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.5 | ColumnmscLpE1ChanTestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.6 | ColumnmscLpE1ChanTestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.7 | ColumnmscLpE1ChanTestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.8 | ColumnmscLpE1ChanTestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12 | TablemscLpE1ChanTestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1 | RowmscLpE1ChanTestResultsEntry | not-accessible | mandatory | An entry in the mscLpE1ChanTestResultsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.1 | ColumnmscLpE1ChanTestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.2 | ColumnmscLpE1ChanTestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.3 | ColumnmscLpE1ChanTestCauseOfTermination | read-only | mandatory | This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. t… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.4 | ColumnmscLpE1ChanTestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.5 | ColumnmscLpE1ChanTestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.6 | ColumnmscLpE1ChanTestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.7 | ColumnmscLpE1ChanTestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.8 | ColumnmscLpE1ChanTestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.9 | ColumnmscLpE1ChanTestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.10 | ColumnmscLpE1ChanTestErroredFrmRx | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.11 | ColumnmscLpE1ChanTestBitErrorRate | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3 | NodemscLpE1ChanCell | |||
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.1 | TablemscLpE1ChanCellRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpE1ChanCell components. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1 | RowmscLpE1ChanCellRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpE1ChanCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.1 | ColumnmscLpE1ChanCellRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpE1ChanCell components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.2 | ColumnmscLpE1ChanCellComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.4 | ColumnmscLpE1ChanCellStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpE1ChanCell tables. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.10 | ColumnmscLpE1ChanCellIndex | not-accessible | mandatory | This variable represents the index for the mscLpE1ChanCell tables. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.10 | TablemscLpE1ChanCellProvTable | not-accessible | mandatory | This group contains the provisioning attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1 | RowmscLpE1ChanCellProvEntry | not-accessible | mandatory | An entry in the mscLpE1ChanCellProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1.1 | ColumnmscLpE1ChanCellAlarmActDelay | read-write | mandatory | This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The tim… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1.2 | ColumnmscLpE1ChanCellScrambleCellPayload | read-write | mandatory | Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit p… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1.3 | ColumnmscLpE1ChanCellCorrectSingleBitHeaderErrors | read-write | mandatory | This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affecte… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.11 | TablemscLpE1ChanCellOperTable | not-accessible | mandatory | This group contains the common operational attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.11.1 | RowmscLpE1ChanCellOperEntry | not-accessible | mandatory | An entry in the mscLpE1ChanCellOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.11.1.1 | ColumnmscLpE1ChanCellLcdAlarm | read-only | mandatory | This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been obser… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.12 | TablemscLpE1ChanCellStatsTable | not-accessible | mandatory | This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1 | RowmscLpE1ChanCellStatsEntry | not-accessible | mandatory | An entry in the mscLpE1ChanCellStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.1 | ColumnmscLpE1ChanCellUncorrectableHecErrors | read-only | mandatory | This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.2 | ColumnmscLpE1ChanCellSevErroredSec | read-only | mandatory | This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declar… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.3 | ColumnmscLpE1ChanCellReceiveCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a peri… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.4 | ColumnmscLpE1ChanCellTransmitCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a p… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.5 | ColumnmscLpE1ChanCellCorrectableHeaderErrors | read-only | mandatory | This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibit… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4 | NodemscLpE1ChanTc | |||
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.1 | TablemscLpE1ChanTcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpE1ChanTc components. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1 | RowmscLpE1ChanTcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpE1ChanTc component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.1 | ColumnmscLpE1ChanTcRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpE1ChanTc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.2 | ColumnmscLpE1ChanTcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.4 | ColumnmscLpE1ChanTcStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpE1ChanTc tables. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.10 | ColumnmscLpE1ChanTcIndex | not-accessible | mandatory | This variable represents the index for the mscLpE1ChanTc tables. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.10 | TablemscLpE1ChanTcProvTable | not-accessible | mandatory | This group contains all specific provisioning data for a Tc component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.10.1 | RowmscLpE1ChanTcProvEntry | not-accessible | mandatory | An entry in the mscLpE1ChanTcProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.10.1.1 | ColumnmscLpE1ChanTcReplacementData | read-write | mandatory | This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacemen… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.10.1.2 | ColumnmscLpE1ChanTcSignalOneDuration | read-write | mandatory | This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.11 | TablemscLpE1ChanTcOpTable | not-accessible | mandatory | This group contains all specific operational data for a Tc component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.11.1 | RowmscLpE1ChanTcOpEntry | not-accessible | mandatory | An entry in the mscLpE1ChanTcOpTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.11.1.1 | ColumnmscLpE1ChanTcIngressConditioning | read-only | mandatory | This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.11.1.2 | ColumnmscLpE1ChanTcEgressConditioning | read-only | mandatory | This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards th… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.398 | TablemscLpE1ChanTcSigOneTable | not-accessible | mandatory | This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The v… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.398.1 | RowmscLpE1ChanTcSigOneEntry | not-accessible | mandatory | An entry in the mscLpE1ChanTcSigOneTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.398.1.1 | ColumnmscLpE1ChanTcSigOneIndex | not-accessible | mandatory | This variable represents the mscLpE1ChanTcSigOneTable specific index for the mscLpE1ChanTcSigOneTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.398.1.2 | ColumnmscLpE1ChanTcSigOneValue | read-write | mandatory | This variable represents an individual value for the mscLpE1ChanTcSigOneTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.399 | TablemscLpE1ChanTcSigTwoTable | not-accessible | mandatory | This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The v… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.399.1 | RowmscLpE1ChanTcSigTwoEntry | not-accessible | mandatory | An entry in the mscLpE1ChanTcSigTwoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.399.1.1 | ColumnmscLpE1ChanTcSigTwoIndex | not-accessible | mandatory | This variable represents the mscLpE1ChanTcSigTwoTable specific index for the mscLpE1ChanTcSigTwoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.4.399.1.2 | ColumnmscLpE1ChanTcSigTwoValue | read-write | mandatory | This variable represents an individual value for the mscLpE1ChanTcSigTwoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.5 | NodemscLpE1ChanFlm | |||
| 1.3.6.1.4.1.562.36.2.1.12.8.2.5.1 | TablemscLpE1ChanFlmRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpE1ChanFlm components. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1 | RowmscLpE1ChanFlmRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpE1ChanFlm component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.1 | ColumnmscLpE1ChanFlmRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpE1ChanFlm components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.2 | ColumnmscLpE1ChanFlmComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.4 | ColumnmscLpE1ChanFlmStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpE1ChanFlm tables. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.10 | ColumnmscLpE1ChanFlmIndex | not-accessible | mandatory | This variable represents the index for the mscLpE1ChanFlm tables. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.5.10 | TablemscLpE1ChanFlmProvTable | not-accessible | mandatory | This group contains all specific provisioning data for an Flm component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.5.10.1 | RowmscLpE1ChanFlmProvEntry | not-accessible | mandatory | An entry in the mscLpE1ChanFlmProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.5.10.1.1 | ColumnmscLpE1ChanFlmABitMonitoring | read-write | mandatory | This attribute controls the monitoring of A-bit defects. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.5.10.1.2 | ColumnmscLpE1ChanFlmHdlcMonitoring | read-write | mandatory | This attribute controls the monitoring of HDLC defect. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.5.11 | TablemscLpE1ChanFlmOpTable | not-accessible | mandatory | This group contains all specific operational data for an Flm component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.5.11.1 | RowmscLpE1ChanFlmOpEntry | not-accessible | mandatory | An entry in the mscLpE1ChanFlmOpTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.5.11.1.1 | ColumnmscLpE1ChanFlmFlmStatus | read-only | mandatory | This attribute indicates the status of a Frame Relay channel on an E1 line. By combining the E1 channel-associated-signalling (CAS) A-bits status, and HDLC def… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.10 | TablemscLpE1ChanProvTable | not-accessible | mandatory | This group contains all of the provisional data for a Channel component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.10.1 | RowmscLpE1ChanProvEntry | not-accessible | mandatory | An entry in the mscLpE1ChanProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.1 | ColumnmscLpE1ChanTimeslots | read-write | mandatory | This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 fo… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.2 | ColumnmscLpE1ChanTimeslotDataRate | read-write | mandatory | This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardles… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.3 | ColumnmscLpE1ChanApplicationFramerName | read-write | mandatory | This attribute defines the link to the software stack. It defines which application is running on top of this hardware component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.11 | TablemscLpE1ChanCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.11.1 | RowmscLpE1ChanCidDataEntry | not-accessible | mandatory | An entry in the mscLpE1ChanCidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.11.1.1 | ColumnmscLpE1ChanCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.12 | TablemscLpE1ChanIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.12.1 | RowmscLpE1ChanIfEntryEntry | not-accessible | mandatory | An entry in the mscLpE1ChanIfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.12.1.1 | ColumnmscLpE1ChanIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.12.1.2 | ColumnmscLpE1ChanIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.13 | TablemscLpE1ChanOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.13.1 | RowmscLpE1ChanOperStatusEntry | not-accessible | mandatory | An entry in the mscLpE1ChanOperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.13.1.1 | ColumnmscLpE1ChanSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.14 | TablemscLpE1ChanStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1 | RowmscLpE1ChanStateEntry | not-accessible | mandatory | An entry in the mscLpE1ChanStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.1 | ColumnmscLpE1ChanAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.2 | ColumnmscLpE1ChanOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.3 | ColumnmscLpE1ChanUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.4 | ColumnmscLpE1ChanAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.5 | ColumnmscLpE1ChanProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.6 | ColumnmscLpE1ChanControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.7 | ColumnmscLpE1ChanAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.8 | ColumnmscLpE1ChanStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.9 | ColumnmscLpE1ChanUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.15 | TablemscLpE1ChanOperTable | not-accessible | mandatory | This group contains all of the operational data for a Channel component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.15.1 | RowmscLpE1ChanOperEntry | not-accessible | mandatory | An entry in the mscLpE1ChanOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.15.1.1 | ColumnmscLpE1ChanActualChannelSpeed | read-only | mandatory | This attribute displays the measured link speed of the Channel component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.16 | TablemscLpE1ChanAdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.16.1 | RowmscLpE1ChanAdminInfoEntry | not-accessible | mandatory | An entry in the mscLpE1ChanAdminInfoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.16.1.1 | ColumnmscLpE1ChanVendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.8.2.16.1.2 | ColumnmscLpE1ChanCommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.8.3 | NodemscLpE1Test | |||
| 1.3.6.1.4.1.562.36.2.1.12.8.3.1 | TablemscLpE1TestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpE1Test components. |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.1.1 | RowmscLpE1TestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpE1Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.1 | ColumnmscLpE1TestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpE1Test components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.2 | ColumnmscLpE1TestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.4 | ColumnmscLpE1TestStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpE1Test tables. |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.10 | ColumnmscLpE1TestIndex | not-accessible | mandatory | This variable represents the index for the mscLpE1Test tables. |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.10 | TablemscLpE1TestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.10.1 | RowmscLpE1TestStateEntry | not-accessible | mandatory | An entry in the mscLpE1TestStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.10.1.1 | ColumnmscLpE1TestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.10.1.2 | ColumnmscLpE1TestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.10.1.3 | ColumnmscLpE1TestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.11 | TablemscLpE1TestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.11.1 | RowmscLpE1TestSetupEntry | not-accessible | mandatory | An entry in the mscLpE1TestSetupTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.1 | ColumnmscLpE1TestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.2 | ColumnmscLpE1TestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.3 | ColumnmscLpE1TestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.4 | ColumnmscLpE1TestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.5 | ColumnmscLpE1TestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.6 | ColumnmscLpE1TestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.7 | ColumnmscLpE1TestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.8 | ColumnmscLpE1TestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.12 | TablemscLpE1TestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1 | RowmscLpE1TestResultsEntry | not-accessible | mandatory | An entry in the mscLpE1TestResultsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.1 | ColumnmscLpE1TestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.2 | ColumnmscLpE1TestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.3 | ColumnmscLpE1TestCauseOfTermination | read-only | mandatory | This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. t… |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.4 | ColumnmscLpE1TestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.5 | ColumnmscLpE1TestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.6 | ColumnmscLpE1TestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.7 | ColumnmscLpE1TestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.8 | ColumnmscLpE1TestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.9 | ColumnmscLpE1TestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.10 | ColumnmscLpE1TestErroredFrmRx | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.11 | ColumnmscLpE1TestBitErrorRate | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.8.4 | NodemscLpE1Dsp | |||
| 1.3.6.1.4.1.562.36.2.1.12.8.4.1 | TablemscLpE1DspRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpE1Dsp components. |
| 1.3.6.1.4.1.562.36.2.1.12.8.4.1.1 | RowmscLpE1DspRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpE1Dsp component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.1 | ColumnmscLpE1DspRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpE1Dsp components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.2 | ColumnmscLpE1DspComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.4 | ColumnmscLpE1DspStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpE1Dsp tables. |
| 1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.10 | ColumnmscLpE1DspIndex | not-accessible | mandatory | This variable represents the index for the mscLpE1Dsp tables. |
| 1.3.6.1.4.1.562.36.2.1.12.8.5 | NodemscLpE1Audio | |||
| 1.3.6.1.4.1.562.36.2.1.12.8.5.1 | TablemscLpE1AudioRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpE1Audio components. |
| 1.3.6.1.4.1.562.36.2.1.12.8.5.1.1 | RowmscLpE1AudioRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpE1Audio component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.1 | ColumnmscLpE1AudioRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpE1Audio components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.2 | ColumnmscLpE1AudioComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.4 | ColumnmscLpE1AudioStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpE1Audio tables. |
| 1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.10 | ColumnmscLpE1AudioIndex | not-accessible | mandatory | This variable represents the index for the mscLpE1Audio tables. |
| 1.3.6.1.4.1.562.36.2.1.12.8.10 | TablemscLpE1ProvTable | not-accessible | mandatory | This group contains all of the provisioning data for an E1 component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.10.1 | RowmscLpE1ProvEntry | not-accessible | mandatory | An entry in the mscLpE1ProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.10.1.1 | ColumnmscLpE1LineType | read-write | mandatory | This attribute specifies the framing of the E1 line. When cas (channel associated signalling) is selected, timeslot 16 is reserved for multiframe signalling an… |
| 1.3.6.1.4.1.562.36.2.1.12.8.10.1.2 | ColumnmscLpE1ClockingSource | read-write | mandatory | This attribute defines the source of the transmit clock for the E1 line. When local is selected, the crystal on the port generates the clocking for the line. W… |
| 1.3.6.1.4.1.562.36.2.1.12.8.10.1.3 | ColumnmscLpE1Crc4Mode | read-write | mandatory | This attribute defines whether the CRC-4 checking and generation on the E1 line is enabled or disabled. The default CRC-4 mode is off except for the cell-based… |
| 1.3.6.1.4.1.562.36.2.1.12.8.10.1.4 | ColumnmscLpE1SendRaiOnAis | read-write | mandatory | This attribute defines whether the Remote Alarm Indicator (RAI) will be sent when receiving an AIS alarm. The value is yes by default; it can be changed to no … |
| 1.3.6.1.4.1.562.36.2.1.12.8.10.1.5 | ColumnmscLpE1RaiDeclareAlarmTime | read-write | mandatory | This attribute specifies the period of time that a Remote Alarm Indicator (RAI) must be present before declaring an RAI alarm. The value of auto sets the RAI d… |
| 1.3.6.1.4.1.562.36.2.1.12.8.10.1.6 | ColumnmscLpE1RaiClearAlarmTime | read-write | mandatory | This attribute specifies the period of time that a Remote Alarm Indicator (RAI) has been absent before clearing an RAI alarm. The value of auto sets the RAI cl… |
| 1.3.6.1.4.1.562.36.2.1.12.8.11 | TablemscLpE1CidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.12.8.11.1 | RowmscLpE1CidDataEntry | not-accessible | mandatory | An entry in the mscLpE1CidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.11.1.1 | ColumnmscLpE1CustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.12.8.12 | TablemscLpE1AdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.36.2.1.12.8.12.1 | RowmscLpE1AdminInfoEntry | not-accessible | mandatory | An entry in the mscLpE1AdminInfoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.12.1.1 | ColumnmscLpE1Vendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.8.12.1.2 | ColumnmscLpE1CommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.8.13 | TablemscLpE1IfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.12.8.13.1 | RowmscLpE1IfEntryEntry | not-accessible | mandatory | An entry in the mscLpE1IfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.13.1.1 | ColumnmscLpE1IfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.12.8.13.1.2 | ColumnmscLpE1IfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.12.8.14 | TablemscLpE1OperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.12.8.14.1 | RowmscLpE1OperStatusEntry | not-accessible | mandatory | An entry in the mscLpE1OperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.14.1.1 | ColumnmscLpE1SnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.12.8.15 | TablemscLpE1StateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.12.8.15.1 | RowmscLpE1StateEntry | not-accessible | mandatory | An entry in the mscLpE1StateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.15.1.1 | ColumnmscLpE1AdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.8.15.1.2 | ColumnmscLpE1OperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.8.15.1.3 | ColumnmscLpE1UsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.8.15.1.4 | ColumnmscLpE1AvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.12.8.15.1.5 | ColumnmscLpE1ProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.12.8.15.1.6 | ColumnmscLpE1ControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.12.8.15.1.7 | ColumnmscLpE1AlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.12.8.15.1.8 | ColumnmscLpE1StandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.12.8.15.1.9 | ColumnmscLpE1UnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.12.8.16 | TablemscLpE1OperTable | not-accessible | mandatory | This group contains the common operational data for a component in a digital hierarchy interface. |
| 1.3.6.1.4.1.562.36.2.1.12.8.16.1 | RowmscLpE1OperEntry | not-accessible | mandatory | An entry in the mscLpE1OperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.16.1.1 | ColumnmscLpE1LosAlarm | read-only | mandatory | This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulat… |
| 1.3.6.1.4.1.562.36.2.1.12.8.16.1.2 | ColumnmscLpE1RxAisAlarm | read-only | mandatory | This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observ… |
| 1.3.6.1.4.1.562.36.2.1.12.8.16.1.3 | ColumnmscLpE1LofAlarm | read-only | mandatory | This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framin… |
| 1.3.6.1.4.1.562.36.2.1.12.8.16.1.4 | ColumnmscLpE1RxRaiAlarm | read-only | mandatory | This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has … |
| 1.3.6.1.4.1.562.36.2.1.12.8.16.1.5 | ColumnmscLpE1TxAisAlarm | read-only | mandatory | This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a lock… |
| 1.3.6.1.4.1.562.36.2.1.12.8.16.1.6 | ColumnmscLpE1TxRaiAlarm | read-only | mandatory | This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for… |
| 1.3.6.1.4.1.562.36.2.1.12.8.17 | TablemscLpE1E1OperTable | not-accessible | mandatory | This group contains all of the operational data for a E1 component that are not defined in the DSCommonOp group. |
| 1.3.6.1.4.1.562.36.2.1.12.8.17.1 | RowmscLpE1E1OperEntry | not-accessible | mandatory | An entry in the mscLpE1E1OperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.17.1.1 | ColumnmscLpE1MultifrmLofAlarm | read-only | mandatory | This attribute indicates whether a multiframe LOF (loss of frame) alarm state is entered. A multiframe LOF alarm state is entered when a multiframe LOF defect … |
| 1.3.6.1.4.1.562.36.2.1.12.8.17.1.2 | ColumnmscLpE1RxMultifrmRaiAlarm | read-only | mandatory | This attribute displays whether a multiframe RAI (remote alarm indicator) alarm state has been entered. A multiframe RAI alarm state is entered when a multifra… |
| 1.3.6.1.4.1.562.36.2.1.12.8.17.1.3 | ColumnmscLpE1TxMultifrmRaiAlarm | read-only | mandatory | This attribute displays whether a multiframe RAI (remote alarm indicator) alarm is being sent on the E1 line. This is transmitted when the E1 port detects a mu… |
| 1.3.6.1.4.1.562.36.2.1.12.8.18 | TablemscLpE1StatsTable | not-accessible | mandatory | This group contains the common statistical data for a component in a digital hierarchy interface. |
| 1.3.6.1.4.1.562.36.2.1.12.8.18.1 | RowmscLpE1StatsEntry | not-accessible | mandatory | An entry in the mscLpE1StatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.8.18.1.1 | ColumnmscLpE1RunningTime | read-only | mandatory | The number of seconds since the port component was activated. |
| 1.3.6.1.4.1.562.36.2.1.12.8.18.1.2 | ColumnmscLpE1ErrorFreeSec | read-only | mandatory | The number of seconds that the port has been in an error free state. |
| 1.3.6.1.4.1.562.36.2.1.12.8.18.1.3 | ColumnmscLpE1ErroredSec | read-only | mandatory | An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may… |
| 1.3.6.1.4.1.562.36.2.1.12.8.18.1.4 | ColumnmscLpE1SevErroredSec | read-only | mandatory | A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs. |
| 1.3.6.1.4.1.562.36.2.1.12.8.18.1.5 | ColumnmscLpE1SevErroredFrmSec | read-only | mandatory | A severely errored framing second occurs when a second with one or more Out Of Frame events occurs. |
| 1.3.6.1.4.1.562.36.2.1.12.8.18.1.6 | ColumnmscLpE1UnavailSec | read-only | mandatory | The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Er… |
| 1.3.6.1.4.1.562.36.2.1.12.8.18.1.7 | ColumnmscLpE1BpvErrors | read-only | mandatory | The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line. |
| 1.3.6.1.4.1.562.36.2.1.12.8.18.1.8 | ColumnmscLpE1CrcErrors | read-only | mandatory | If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, i… |
| 1.3.6.1.4.1.562.36.2.1.12.8.18.1.9 | ColumnmscLpE1FrmErrors | read-only | mandatory | The current count of frame errors. A frame error is an error in the framing bits |
| 1.3.6.1.4.1.562.36.2.1.12.8.18.1.10 | ColumnmscLpE1LosStateChanges | read-only | mandatory | The total number of times that the line lost signal. |
| 1.3.6.1.4.1.562.36.2.1.12.8.18.1.11 | ColumnmscLpE1SlipErrors | read-only | mandatory | The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V… |
| 1.3.6.1.4.1.562.36.2.1.12.9 | NodemscLpV35 | |||
| 1.3.6.1.4.1.562.36.2.1.12.9.1 | TablemscLpV35RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpV35 components. |
| 1.3.6.1.4.1.562.36.2.1.12.9.1.1 | RowmscLpV35RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpV35 component. |
| 1.3.6.1.4.1.562.36.2.1.12.9.1.1.1 | ColumnmscLpV35RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpV35 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.9.1.1.2 | ColumnmscLpV35ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.9.1.1.4 | ColumnmscLpV35StorageType | read-only | mandatory | This variable represents the storage type value for the mscLpV35 tables. |
| 1.3.6.1.4.1.562.36.2.1.12.9.1.1.10 | ColumnmscLpV35Index | not-accessible | mandatory | This variable represents the index for the mscLpV35 tables. |
| 1.3.6.1.4.1.562.36.2.1.12.9.2 | NodemscLpV35Test | |||
| 1.3.6.1.4.1.562.36.2.1.12.9.2.1 | TablemscLpV35TestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpV35Test components. |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.1.1 | RowmscLpV35TestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpV35Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.1 | ColumnmscLpV35TestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpV35Test components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.2 | ColumnmscLpV35TestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.4 | ColumnmscLpV35TestStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpV35Test tables. |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.10 | ColumnmscLpV35TestIndex | not-accessible | mandatory | This variable represents the index for the mscLpV35Test tables. |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.10 | TablemscLpV35TestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.10.1 | RowmscLpV35TestStateEntry | not-accessible | mandatory | An entry in the mscLpV35TestStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.10.1.1 | ColumnmscLpV35TestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.10.1.2 | ColumnmscLpV35TestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.10.1.3 | ColumnmscLpV35TestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.11 | TablemscLpV35TestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.11.1 | RowmscLpV35TestSetupEntry | not-accessible | mandatory | An entry in the mscLpV35TestSetupTable. |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.1 | ColumnmscLpV35TestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.2 | ColumnmscLpV35TestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.3 | ColumnmscLpV35TestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.4 | ColumnmscLpV35TestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.5 | ColumnmscLpV35TestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.6 | ColumnmscLpV35TestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.7 | ColumnmscLpV35TestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.8 | ColumnmscLpV35TestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.12 | TablemscLpV35TestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1 | RowmscLpV35TestResultsEntry | not-accessible | mandatory | An entry in the mscLpV35TestResultsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.1 | ColumnmscLpV35TestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.2 | ColumnmscLpV35TestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.3 | ColumnmscLpV35TestCauseOfTermination | read-only | mandatory | This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. t… |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.4 | ColumnmscLpV35TestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.5 | ColumnmscLpV35TestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.6 | ColumnmscLpV35TestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.7 | ColumnmscLpV35TestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.8 | ColumnmscLpV35TestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.9 | ColumnmscLpV35TestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.10 | ColumnmscLpV35TestErroredFrmRx | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.11 | ColumnmscLpV35TestBitErrorRate | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10 | TablemscLpV35ProvTable | not-accessible | mandatory | This group contains all specific provisioning data for a V35 component. |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1 | RowmscLpV35ProvEntry | not-accessible | mandatory | An entry in the mscLpV35ProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.1 | ColumnmscLpV35LinkMode | read-write | mandatory | This attribute defines the intended gender of the V.35 interface. The actual gender of the interface is determined by the physical connection to the patch pane… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.2 | ColumnmscLpV35ReadyLineState | read-write | mandatory | This attribute specifies the line signals originating from the V.35 interface that will always be turned on, provided the interface passes its diagnostics. Thi… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.3 | ColumnmscLpV35DataTransferLineState | read-write | mandatory | This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that b… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.4 | ColumnmscLpV35LineStatusTimeOut | read-write | mandatory | This attribute defines the time that the line state must be stable (good or bad) before a line state change is declared. |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.5 | ColumnmscLpV35LineSpeed | read-write | mandatory | This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounde… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.6 | ColumnmscLpV35ClockingSource | read-write | mandatory | This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the at… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.7 | ColumnmscLpV35DteDataClockSource | read-write | mandatory | This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. A DTE interface uses TSET… |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.8 | ColumnmscLpV35ApplicationFramerName | read-write | mandatory | This attribute contains the component name of a Framer which is associated with the V35 component. |
| 1.3.6.1.4.1.562.36.2.1.12.9.10.1.9 | ColumnmscLpV35EnableDynamicSpeed | read-write | mandatory | When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes on… |
| 1.3.6.1.4.1.562.36.2.1.12.9.11 | TablemscLpV35CidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.12.9.11.1 | RowmscLpV35CidDataEntry | not-accessible | mandatory | An entry in the mscLpV35CidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.12.9.11.1.1 | ColumnmscLpV35CustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.12.9.12 | TablemscLpV35AdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.36.2.1.12.9.12.1 | RowmscLpV35AdminInfoEntry | not-accessible | mandatory | An entry in the mscLpV35AdminInfoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.9.12.1.1 | ColumnmscLpV35Vendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.9.12.1.2 | ColumnmscLpV35CommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.9.13 | TablemscLpV35IfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.12.9.13.1 | RowmscLpV35IfEntryEntry | not-accessible | mandatory | An entry in the mscLpV35IfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.12.9.13.1.1 | ColumnmscLpV35IfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.12.9.13.1.2 | ColumnmscLpV35IfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.12.9.14 | TablemscLpV35OperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.12.9.14.1 | RowmscLpV35OperStatusEntry | not-accessible | mandatory | An entry in the mscLpV35OperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.12.9.14.1.1 | ColumnmscLpV35SnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.12.9.15 | TablemscLpV35StateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.12.9.15.1 | RowmscLpV35StateEntry | not-accessible | mandatory | An entry in the mscLpV35StateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.9.15.1.1 | ColumnmscLpV35AdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.9.15.1.2 | ColumnmscLpV35OperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.9.15.1.3 | ColumnmscLpV35UsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.9.15.1.4 | ColumnmscLpV35AvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.12.9.15.1.5 | ColumnmscLpV35ProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.12.9.15.1.6 | ColumnmscLpV35ControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.12.9.15.1.7 | ColumnmscLpV35AlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.12.9.15.1.8 | ColumnmscLpV35StandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.12.9.15.1.9 | ColumnmscLpV35UnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.12.9.16 | TablemscLpV35OperTable | not-accessible | mandatory | This group contains all specific operational data for a V35 component. |
| 1.3.6.1.4.1.562.36.2.1.12.9.16.1 | RowmscLpV35OperEntry | not-accessible | mandatory | An entry in the mscLpV35OperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.9.16.1.1 | ColumnmscLpV35ActualLinkMode | read-only | mandatory | This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE o… |
| 1.3.6.1.4.1.562.36.2.1.12.9.16.1.2 | ColumnmscLpV35LineState | read-only | mandatory | This attribute contains the current state of the interface signals. Description of bits: rfs(0) dsr(1) dcd(2) rts(3) |
| 1.3.6.1.4.1.562.36.2.1.12.9.16.1.3 | ColumnmscLpV35ActualTxLineSpeed | read-only | mandatory | This attribute is the measured speed of the transmit clock. |
| 1.3.6.1.4.1.562.36.2.1.12.9.16.1.4 | ColumnmscLpV35ActualRxLineSpeed | read-only | mandatory | This attribute is the measured speed of the receive clock. |
| 1.3.6.1.4.1.562.36.2.1.12.9.16.1.5 | ColumnmscLpV35DataXferStateChanges | read-only | mandatory | This attribute contains the number of times that the line has entered or exited the data transfer state. |
| 1.3.6.1.4.1.562.36.2.1.12.10 | NodemscLpX21 | |||
| 1.3.6.1.4.1.562.36.2.1.12.10.1 | TablemscLpX21RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpX21 components. |
| 1.3.6.1.4.1.562.36.2.1.12.10.1.1 | RowmscLpX21RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpX21 component. |
| 1.3.6.1.4.1.562.36.2.1.12.10.1.1.1 | ColumnmscLpX21RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpX21 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.10.1.1.2 | ColumnmscLpX21ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.10.1.1.4 | ColumnmscLpX21StorageType | read-only | mandatory | This variable represents the storage type value for the mscLpX21 tables. |
| 1.3.6.1.4.1.562.36.2.1.12.10.1.1.10 | ColumnmscLpX21Index | not-accessible | mandatory | This variable represents the index for the mscLpX21 tables. |
| 1.3.6.1.4.1.562.36.2.1.12.10.2 | NodemscLpX21Test | |||
| 1.3.6.1.4.1.562.36.2.1.12.10.2.1 | TablemscLpX21TestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpX21Test components. |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.1.1 | RowmscLpX21TestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpX21Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.1 | ColumnmscLpX21TestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpX21Test components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.2 | ColumnmscLpX21TestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.4 | ColumnmscLpX21TestStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpX21Test tables. |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.10 | ColumnmscLpX21TestIndex | not-accessible | mandatory | This variable represents the index for the mscLpX21Test tables. |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.10 | TablemscLpX21TestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.10.1 | RowmscLpX21TestStateEntry | not-accessible | mandatory | An entry in the mscLpX21TestStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.10.1.1 | ColumnmscLpX21TestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.10.1.2 | ColumnmscLpX21TestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.10.1.3 | ColumnmscLpX21TestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.11 | TablemscLpX21TestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.11.1 | RowmscLpX21TestSetupEntry | not-accessible | mandatory | An entry in the mscLpX21TestSetupTable. |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.1 | ColumnmscLpX21TestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.2 | ColumnmscLpX21TestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.3 | ColumnmscLpX21TestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.4 | ColumnmscLpX21TestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.5 | ColumnmscLpX21TestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.6 | ColumnmscLpX21TestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.7 | ColumnmscLpX21TestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.8 | ColumnmscLpX21TestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.12 | TablemscLpX21TestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1 | RowmscLpX21TestResultsEntry | not-accessible | mandatory | An entry in the mscLpX21TestResultsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.1 | ColumnmscLpX21TestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.2 | ColumnmscLpX21TestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.3 | ColumnmscLpX21TestCauseOfTermination | read-only | mandatory | This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. t… |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.4 | ColumnmscLpX21TestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.5 | ColumnmscLpX21TestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.6 | ColumnmscLpX21TestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.7 | ColumnmscLpX21TestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.8 | ColumnmscLpX21TestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.9 | ColumnmscLpX21TestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.10 | ColumnmscLpX21TestErroredFrmRx | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.11 | ColumnmscLpX21TestBitErrorRate | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.10.10 | TablemscLpX21ProvTable | not-accessible | mandatory | This group contains all specific provisioning data for an X21 component. |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1 | RowmscLpX21ProvEntry | not-accessible | mandatory | An entry in the mscLpX21ProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.1 | ColumnmscLpX21LinkMode | read-write | mandatory | This attribute defines the intended gender of the X21 component (V.11 interface). The actual gender of the interface is determined by the physical connection t… |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.2 | ColumnmscLpX21ReadyLineState | read-write | mandatory | This attribute specifies the line signals originating from the V.11 interface that will always be turned on, provided the interface passes its diagnostics. Thi… |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.3 | ColumnmscLpX21DataTransferLineState | read-write | mandatory | The state of the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and … |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.4 | ColumnmscLpX21LineStatusTimeOut | read-write | mandatory | This attribute defines the time the line state must be stable (good or bad) before a state change is declared. |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.5 | ColumnmscLpX21LineSpeed | read-write | mandatory | This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounde… |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.6 | ColumnmscLpX21ClockingSource | read-write | mandatory | This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the at… |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.7 | ColumnmscLpX21DteDataClockSource | read-write | mandatory | This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. Note that a V.11 DTE inte… |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.8 | ColumnmscLpX21LineTerminationRequired | read-write | mandatory | This attribute specifies whether termination is required for this interface. If the hardware setup does not match this attribute, an alarm will be generated. |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.9 | ColumnmscLpX21ApplicationFramerName | read-write | mandatory | This attribute contains the component name of a Framer which is associated with the X21 component. |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.10 | ColumnmscLpX21EnableDynamicSpeed | read-write | mandatory | When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes on… |
| 1.3.6.1.4.1.562.36.2.1.12.10.11 | TablemscLpX21CidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.12.10.11.1 | RowmscLpX21CidDataEntry | not-accessible | mandatory | An entry in the mscLpX21CidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.12.10.11.1.1 | ColumnmscLpX21CustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.12.10.12 | TablemscLpX21AdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.36.2.1.12.10.12.1 | RowmscLpX21AdminInfoEntry | not-accessible | mandatory | An entry in the mscLpX21AdminInfoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.10.12.1.1 | ColumnmscLpX21Vendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.10.12.1.2 | ColumnmscLpX21CommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.10.13 | TablemscLpX21IfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.12.10.13.1 | RowmscLpX21IfEntryEntry | not-accessible | mandatory | An entry in the mscLpX21IfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.12.10.13.1.1 | ColumnmscLpX21IfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.12.10.13.1.2 | ColumnmscLpX21IfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.12.10.14 | TablemscLpX21OperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.12.10.14.1 | RowmscLpX21OperStatusEntry | not-accessible | mandatory | An entry in the mscLpX21OperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.12.10.14.1.1 | ColumnmscLpX21SnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.12.10.15 | TablemscLpX21StateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.12.10.15.1 | RowmscLpX21StateEntry | not-accessible | mandatory | An entry in the mscLpX21StateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.10.15.1.1 | ColumnmscLpX21AdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.10.15.1.2 | ColumnmscLpX21OperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.10.15.1.3 | ColumnmscLpX21UsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.10.15.1.4 | ColumnmscLpX21AvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.12.10.15.1.5 | ColumnmscLpX21ProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.12.10.15.1.6 | ColumnmscLpX21ControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.12.10.15.1.7 | ColumnmscLpX21AlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.12.10.15.1.8 | ColumnmscLpX21StandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.12.10.15.1.9 | ColumnmscLpX21UnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.12.10.16 | TablemscLpX21OperTable | not-accessible | mandatory | This group contains all specific operational data for an X21 component. |
| 1.3.6.1.4.1.562.36.2.1.12.10.16.1 | RowmscLpX21OperEntry | not-accessible | mandatory | An entry in the mscLpX21OperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.10.16.1.1 | ColumnmscLpX21ActualLinkMode | read-only | mandatory | This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE o… |
| 1.3.6.1.4.1.562.36.2.1.12.10.16.1.2 | ColumnmscLpX21LineState | read-only | mandatory | This attribute contains the current state of the interface signals. Description of bits: indication(0) control(1) |
| 1.3.6.1.4.1.562.36.2.1.12.10.16.1.3 | ColumnmscLpX21ActualTxLineSpeed | read-only | mandatory | This attribute is the measured speed of the transmit clock. |
| 1.3.6.1.4.1.562.36.2.1.12.10.16.1.4 | ColumnmscLpX21ActualRxLineSpeed | read-only | mandatory | This attribute is the measured speed of the receive clock. |
| 1.3.6.1.4.1.562.36.2.1.12.10.16.1.5 | ColumnmscLpX21DataXferStateChanges | read-only | mandatory | This attribute contains the number of times that the line has entered or exited the data transfer state. |
| 1.3.6.1.4.1.562.36.2.1.12.14 | NodemscLpSonet | |||
| 1.3.6.1.4.1.562.36.2.1.12.14.1 | TablemscLpSonetRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpSonet components. |
| 1.3.6.1.4.1.562.36.2.1.12.14.1.1 | RowmscLpSonetRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpSonet component. |
| 1.3.6.1.4.1.562.36.2.1.12.14.1.1.1 | ColumnmscLpSonetRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpSonet components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.14.1.1.2 | ColumnmscLpSonetComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.14.1.1.4 | ColumnmscLpSonetStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpSonet tables. |
| 1.3.6.1.4.1.562.36.2.1.12.14.1.1.10 | ColumnmscLpSonetIndex | not-accessible | mandatory | This variable represents the index for the mscLpSonet tables. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2 | NodemscLpSonetPath | |||
| 1.3.6.1.4.1.562.36.2.1.12.14.2.1 | TablemscLpSonetPathRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpSonetPath components. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.1.1 | RowmscLpSonetPathRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpSonetPath component. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.1 | ColumnmscLpSonetPathRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpSonetPath components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.2 | ColumnmscLpSonetPathComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.4 | ColumnmscLpSonetPathStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpSonetPath tables. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.10 | ColumnmscLpSonetPathIndex | not-accessible | mandatory | This variable represents the index for the mscLpSonetPath tables. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2 | NodemscLpSonetPathCell | |||
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.1 | TablemscLpSonetPathCellRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpSonetPathCell components. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1 | RowmscLpSonetPathCellRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpSonetPathCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.1 | ColumnmscLpSonetPathCellRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpSonetPathCell components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.2 | ColumnmscLpSonetPathCellComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.4 | ColumnmscLpSonetPathCellStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpSonetPathCell tables. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.10 | ColumnmscLpSonetPathCellIndex | not-accessible | mandatory | This variable represents the index for the mscLpSonetPathCell tables. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.10 | TablemscLpSonetPathCellProvTable | not-accessible | mandatory | This group contains the provisioning attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1 | RowmscLpSonetPathCellProvEntry | not-accessible | mandatory | An entry in the mscLpSonetPathCellProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1.1 | ColumnmscLpSonetPathCellAlarmActDelay | read-write | mandatory | This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The tim… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1.2 | ColumnmscLpSonetPathCellScrambleCellPayload | read-write | mandatory | Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit p… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1.3 | ColumnmscLpSonetPathCellCorrectSingleBitHeaderErrors | read-write | mandatory | This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affecte… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.11 | TablemscLpSonetPathCellOperTable | not-accessible | mandatory | This group contains the common operational attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.11.1 | RowmscLpSonetPathCellOperEntry | not-accessible | mandatory | An entry in the mscLpSonetPathCellOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.11.1.1 | ColumnmscLpSonetPathCellLcdAlarm | read-only | mandatory | This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been obser… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.12 | TablemscLpSonetPathCellStatsTable | not-accessible | mandatory | This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1 | RowmscLpSonetPathCellStatsEntry | not-accessible | mandatory | An entry in the mscLpSonetPathCellStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.1 | ColumnmscLpSonetPathCellUncorrectableHecErrors | read-only | mandatory | This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.2 | ColumnmscLpSonetPathCellSevErroredSec | read-only | mandatory | This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declar… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.3 | ColumnmscLpSonetPathCellReceiveCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a peri… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.4 | ColumnmscLpSonetPathCellTransmitCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a p… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.5 | ColumnmscLpSonetPathCellCorrectableHeaderErrors | read-only | mandatory | This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibit… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.10 | TablemscLpSonetPathProvTable | not-accessible | mandatory | This group contains all of the provisioning data for a Sonet/Sdh Path component. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.10.1 | RowmscLpSonetPathProvEntry | not-accessible | mandatory | An entry in the mscLpSonetPathProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.10.1.1 | ColumnmscLpSonetPathApplicationFramerName | read-write | mandatory | This attribute defines the link to the software stack. It defines which application is running on top of the Path component. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.11 | TablemscLpSonetPathCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.11.1 | RowmscLpSonetPathCidDataEntry | not-accessible | mandatory | An entry in the mscLpSonetPathCidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.11.1.1 | ColumnmscLpSonetPathCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.12 | TablemscLpSonetPathStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1 | RowmscLpSonetPathStateEntry | not-accessible | mandatory | An entry in the mscLpSonetPathStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.1 | ColumnmscLpSonetPathAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.2 | ColumnmscLpSonetPathOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.3 | ColumnmscLpSonetPathUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.4 | ColumnmscLpSonetPathAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.5 | ColumnmscLpSonetPathProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.6 | ColumnmscLpSonetPathControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.7 | ColumnmscLpSonetPathAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.8 | ColumnmscLpSonetPathStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.9 | ColumnmscLpSonetPathUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.13 | TablemscLpSonetPathIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.13.1 | RowmscLpSonetPathIfEntryEntry | not-accessible | mandatory | An entry in the mscLpSonetPathIfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.13.1.1 | ColumnmscLpSonetPathIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.13.1.2 | ColumnmscLpSonetPathIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.14 | TablemscLpSonetPathOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.14.1 | RowmscLpSonetPathOperStatusEntry | not-accessible | mandatory | An entry in the mscLpSonetPathOperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.14.1.1 | ColumnmscLpSonetPathSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.15 | TablemscLpSonetPathOperTable | not-accessible | mandatory | This group contains the common operational data for Path component. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1 | RowmscLpSonetPathOperEntry | not-accessible | mandatory | An entry in the mscLpSonetPathOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.1 | ColumnmscLpSonetPathLopAlarm | read-only | mandatory | This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and acc… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.2 | ColumnmscLpSonetPathRxAisAlarm | read-only | mandatory | This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have … |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.3 | ColumnmscLpSonetPathRxRfiAlarm | read-only | mandatory | This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defec… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.4 | ColumnmscLpSonetPathSignalLabelMismatch | read-only | mandatory | This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM de… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.5 | ColumnmscLpSonetPathTxAis | read-only | mandatory | This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Pat… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.6 | ColumnmscLpSonetPathTxRdi | read-only | mandatory | This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.16 | TablemscLpSonetPathStatsTable | not-accessible | mandatory | This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1 | RowmscLpSonetPathStatsEntry | not-accessible | mandatory | An entry in the mscLpSonetPathStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.1 | ColumnmscLpSonetPathPathErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.2 | ColumnmscLpSonetPathPathCodeViolations | read-only | mandatory | This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over s… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.3 | ColumnmscLpSonetPathPathErroredSec | read-only | mandatory | This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more … |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.4 | ColumnmscLpSonetPathPathSevErroredSec | read-only | mandatory | This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing m… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.5 | ColumnmscLpSonetPathPathAisLopSec | read-only | mandatory | This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP d… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.6 | ColumnmscLpSonetPathPathUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 co… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.7 | ColumnmscLpSonetPathPathFailures | read-only | mandatory | This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.8 | ColumnmscLpSonetPathFarEndPathErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state. |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.9 | ColumnmscLpSonetPathFarEndPathCodeViolations | read-only | mandatory | This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.10 | ColumnmscLpSonetPathFarEndPathErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing … |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.11 | ColumnmscLpSonetPathFarEndPathSevErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals … |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.12 | ColumnmscLpSonetPathFarEndPathAisLopSec | read-only | mandatory | This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.13 | ColumnmscLpSonetPathFarEndPathUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at th… |
| 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.14 | ColumnmscLpSonetPathFarEndPathFailures | read-only | mandatory | This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared. |
| 1.3.6.1.4.1.562.36.2.1.12.14.3 | NodemscLpSonetTest | |||
| 1.3.6.1.4.1.562.36.2.1.12.14.3.1 | TablemscLpSonetTestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpSonetTest components. |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.1.1 | RowmscLpSonetTestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpSonetTest component. |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.1 | ColumnmscLpSonetTestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpSonetTest components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.2 | ColumnmscLpSonetTestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.4 | ColumnmscLpSonetTestStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpSonetTest tables. |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.10 | ColumnmscLpSonetTestIndex | not-accessible | mandatory | This variable represents the index for the mscLpSonetTest tables. |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.10 | TablemscLpSonetTestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.10.1 | RowmscLpSonetTestStateEntry | not-accessible | mandatory | An entry in the mscLpSonetTestStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.10.1.1 | ColumnmscLpSonetTestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.10.1.2 | ColumnmscLpSonetTestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.10.1.3 | ColumnmscLpSonetTestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.11 | TablemscLpSonetTestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.11.1 | RowmscLpSonetTestSetupEntry | not-accessible | mandatory | An entry in the mscLpSonetTestSetupTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.1 | ColumnmscLpSonetTestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.2 | ColumnmscLpSonetTestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.3 | ColumnmscLpSonetTestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.4 | ColumnmscLpSonetTestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.5 | ColumnmscLpSonetTestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.6 | ColumnmscLpSonetTestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.7 | ColumnmscLpSonetTestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.8 | ColumnmscLpSonetTestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.12 | TablemscLpSonetTestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1 | RowmscLpSonetTestResultsEntry | not-accessible | mandatory | An entry in the mscLpSonetTestResultsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.1 | ColumnmscLpSonetTestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.2 | ColumnmscLpSonetTestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.3 | ColumnmscLpSonetTestCauseOfTermination | read-only | mandatory | This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. t… |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.4 | ColumnmscLpSonetTestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.5 | ColumnmscLpSonetTestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.6 | ColumnmscLpSonetTestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.7 | ColumnmscLpSonetTestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.8 | ColumnmscLpSonetTestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.9 | ColumnmscLpSonetTestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.10 | ColumnmscLpSonetTestErroredFrmRx | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.11 | ColumnmscLpSonetTestBitErrorRate | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.14.10 | TablemscLpSonetProvTable | not-accessible | mandatory | This group contains all of the provisioning data for a Sonet or Sdh component. |
| 1.3.6.1.4.1.562.36.2.1.12.14.10.1 | RowmscLpSonetProvEntry | not-accessible | mandatory | An entry in the mscLpSonetProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.10.1.1 | ColumnmscLpSonetClockingSource | read-write | mandatory | This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its … |
| 1.3.6.1.4.1.562.36.2.1.12.14.11 | TablemscLpSonetCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.12.14.11.1 | RowmscLpSonetCidDataEntry | not-accessible | mandatory | An entry in the mscLpSonetCidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.11.1.1 | ColumnmscLpSonetCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.12.14.12 | TablemscLpSonetAdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.36.2.1.12.14.12.1 | RowmscLpSonetAdminInfoEntry | not-accessible | mandatory | An entry in the mscLpSonetAdminInfoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.12.1.1 | ColumnmscLpSonetVendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.14.12.1.2 | ColumnmscLpSonetCommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.14.13 | TablemscLpSonetIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.12.14.13.1 | RowmscLpSonetIfEntryEntry | not-accessible | mandatory | An entry in the mscLpSonetIfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.13.1.1 | ColumnmscLpSonetIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.12.14.13.1.2 | ColumnmscLpSonetIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.12.14.14 | TablemscLpSonetOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.12.14.14.1 | RowmscLpSonetOperStatusEntry | not-accessible | mandatory | An entry in the mscLpSonetOperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.14.1.1 | ColumnmscLpSonetSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.12.14.15 | TablemscLpSonetStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.12.14.15.1 | RowmscLpSonetStateEntry | not-accessible | mandatory | An entry in the mscLpSonetStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.15.1.1 | ColumnmscLpSonetAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.14.15.1.2 | ColumnmscLpSonetOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.14.15.1.3 | ColumnmscLpSonetUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.14.15.1.4 | ColumnmscLpSonetAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.12.14.15.1.5 | ColumnmscLpSonetProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.12.14.15.1.6 | ColumnmscLpSonetControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.12.14.15.1.7 | ColumnmscLpSonetAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.12.14.15.1.8 | ColumnmscLpSonetStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.12.14.15.1.9 | ColumnmscLpSonetUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.12.14.16 | TablemscLpSonetOperTable | not-accessible | mandatory | This group contains the common operational data for Sonet or Sdh component. |
| 1.3.6.1.4.1.562.36.2.1.12.14.16.1 | RowmscLpSonetOperEntry | not-accessible | mandatory | An entry in the mscLpSonetOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.16.1.1 | ColumnmscLpSonetLosAlarm | read-only | mandatory | This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and acc… |
| 1.3.6.1.4.1.562.36.2.1.12.14.16.1.2 | ColumnmscLpSonetLofAlarm | read-only | mandatory | This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accum… |
| 1.3.6.1.4.1.562.36.2.1.12.14.16.1.3 | ColumnmscLpSonetRxAisAlarm | read-only | mandatory | This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have b… |
| 1.3.6.1.4.1.562.36.2.1.12.14.16.1.4 | ColumnmscLpSonetRxRfiAlarm | read-only | mandatory | This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure … |
| 1.3.6.1.4.1.562.36.2.1.12.14.16.1.5 | ColumnmscLpSonetTxAis | read-only | mandatory | This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the… |
| 1.3.6.1.4.1.562.36.2.1.12.14.16.1.6 | ColumnmscLpSonetTxRdi | read-only | mandatory | This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon t… |
| 1.3.6.1.4.1.562.36.2.1.12.14.16.1.7 | ColumnmscLpSonetUnusableTxClockRefAlarm | read-only | mandatory | This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port p… |
| 1.3.6.1.4.1.562.36.2.1.12.14.17 | TablemscLpSonetStatsTable | not-accessible | mandatory | This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reac… |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1 | RowmscLpSonetStatsEntry | not-accessible | mandatory | An entry in the mscLpSonetStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.1 | ColumnmscLpSonetRunningTime | read-only | mandatory | This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts t… |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.2 | ColumnmscLpSonetErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state. |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.3 | ColumnmscLpSonetSectCodeViolations | read-only | mandatory | This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for s… |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.4 | ColumnmscLpSonetSectErroredSec | read-only | mandatory | This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or mo… |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.5 | ColumnmscLpSonetSectSevErroredSec | read-only | mandatory | This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containin… |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.6 | ColumnmscLpSonetSectLosSec | read-only | mandatory | This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or mo… |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.7 | ColumnmscLpSonetSectSevErroredFrmSec | read-only | mandatory | This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals c… |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.8 | ColumnmscLpSonetSectFailures | read-only | mandatory | This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared. |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.9 | ColumnmscLpSonetLineCodeViolations | read-only | mandatory | This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for sec… |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.10 | ColumnmscLpSonetLineErroredSec | read-only | mandatory | This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more … |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.11 | ColumnmscLpSonetLineSevErroredSec | read-only | mandatory | This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing m… |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.12 | ColumnmscLpSonetLineAisSec | read-only | mandatory | This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more … |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.13 | ColumnmscLpSonetLineUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 co… |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.14 | ColumnmscLpSonetLineFailures | read-only | mandatory | This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared. |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.15 | ColumnmscLpSonetFarEndLineErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state. |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.16 | ColumnmscLpSonetFarEndLineCodeViolations | read-only | mandatory | This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far… |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.17 | ColumnmscLpSonetFarEndLineErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing … |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.18 | ColumnmscLpSonetFarEndLineSevErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals … |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.19 | ColumnmscLpSonetFarEndLineAisSec | read-only | mandatory | This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more… |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.20 | ColumnmscLpSonetFarEndLineUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at th… |
| 1.3.6.1.4.1.562.36.2.1.12.14.17.1.21 | ColumnmscLpSonetFarEndLineFailures | read-only | mandatory | This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared. |
| 1.3.6.1.4.1.562.36.2.1.12.15 | NodemscLpSdh | |||
| 1.3.6.1.4.1.562.36.2.1.12.15.1 | TablemscLpSdhRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpSdh components. |
| 1.3.6.1.4.1.562.36.2.1.12.15.1.1 | RowmscLpSdhRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpSdh component. |
| 1.3.6.1.4.1.562.36.2.1.12.15.1.1.1 | ColumnmscLpSdhRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpSdh components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.15.1.1.2 | ColumnmscLpSdhComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.15.1.1.4 | ColumnmscLpSdhStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpSdh tables. |
| 1.3.6.1.4.1.562.36.2.1.12.15.1.1.10 | ColumnmscLpSdhIndex | not-accessible | mandatory | This variable represents the index for the mscLpSdh tables. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2 | NodemscLpSdhPath | |||
| 1.3.6.1.4.1.562.36.2.1.12.15.2.1 | TablemscLpSdhPathRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpSdhPath components. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.1.1 | RowmscLpSdhPathRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpSdhPath component. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.1 | ColumnmscLpSdhPathRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpSdhPath components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.2 | ColumnmscLpSdhPathComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.4 | ColumnmscLpSdhPathStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpSdhPath tables. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.10 | ColumnmscLpSdhPathIndex | not-accessible | mandatory | This variable represents the index for the mscLpSdhPath tables. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2 | NodemscLpSdhPathCell | |||
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.1 | TablemscLpSdhPathCellRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpSdhPathCell components. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1 | RowmscLpSdhPathCellRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpSdhPathCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.1 | ColumnmscLpSdhPathCellRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpSdhPathCell components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.2 | ColumnmscLpSdhPathCellComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.4 | ColumnmscLpSdhPathCellStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpSdhPathCell tables. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.10 | ColumnmscLpSdhPathCellIndex | not-accessible | mandatory | This variable represents the index for the mscLpSdhPathCell tables. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.10 | TablemscLpSdhPathCellProvTable | not-accessible | mandatory | This group contains the provisioning attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1 | RowmscLpSdhPathCellProvEntry | not-accessible | mandatory | An entry in the mscLpSdhPathCellProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1.1 | ColumnmscLpSdhPathCellAlarmActDelay | read-write | mandatory | This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The tim… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1.2 | ColumnmscLpSdhPathCellScrambleCellPayload | read-write | mandatory | Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit p… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1.3 | ColumnmscLpSdhPathCellCorrectSingleBitHeaderErrors | read-write | mandatory | This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affecte… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.11 | TablemscLpSdhPathCellOperTable | not-accessible | mandatory | This group contains the common operational attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.11.1 | RowmscLpSdhPathCellOperEntry | not-accessible | mandatory | An entry in the mscLpSdhPathCellOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.11.1.1 | ColumnmscLpSdhPathCellLcdAlarm | read-only | mandatory | This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been obser… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.12 | TablemscLpSdhPathCellStatsTable | not-accessible | mandatory | This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1 | RowmscLpSdhPathCellStatsEntry | not-accessible | mandatory | An entry in the mscLpSdhPathCellStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.1 | ColumnmscLpSdhPathCellUncorrectableHecErrors | read-only | mandatory | This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.2 | ColumnmscLpSdhPathCellSevErroredSec | read-only | mandatory | This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declar… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.3 | ColumnmscLpSdhPathCellReceiveCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a peri… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.4 | ColumnmscLpSdhPathCellTransmitCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a p… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.5 | ColumnmscLpSdhPathCellCorrectableHeaderErrors | read-only | mandatory | This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibit… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.10 | TablemscLpSdhPathProvTable | not-accessible | mandatory | This group contains all of the provisioning data for a Sonet/Sdh Path component. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.10.1 | RowmscLpSdhPathProvEntry | not-accessible | mandatory | An entry in the mscLpSdhPathProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.10.1.1 | ColumnmscLpSdhPathApplicationFramerName | read-write | mandatory | This attribute defines the link to the software stack. It defines which application is running on top of the Path component. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.11 | TablemscLpSdhPathCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.11.1 | RowmscLpSdhPathCidDataEntry | not-accessible | mandatory | An entry in the mscLpSdhPathCidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.11.1.1 | ColumnmscLpSdhPathCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.12 | TablemscLpSdhPathStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1 | RowmscLpSdhPathStateEntry | not-accessible | mandatory | An entry in the mscLpSdhPathStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.1 | ColumnmscLpSdhPathAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.2 | ColumnmscLpSdhPathOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.3 | ColumnmscLpSdhPathUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.4 | ColumnmscLpSdhPathAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.5 | ColumnmscLpSdhPathProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.6 | ColumnmscLpSdhPathControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.7 | ColumnmscLpSdhPathAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.8 | ColumnmscLpSdhPathStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.9 | ColumnmscLpSdhPathUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.13 | TablemscLpSdhPathIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.13.1 | RowmscLpSdhPathIfEntryEntry | not-accessible | mandatory | An entry in the mscLpSdhPathIfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.13.1.1 | ColumnmscLpSdhPathIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.13.1.2 | ColumnmscLpSdhPathIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.14 | TablemscLpSdhPathOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.14.1 | RowmscLpSdhPathOperStatusEntry | not-accessible | mandatory | An entry in the mscLpSdhPathOperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.14.1.1 | ColumnmscLpSdhPathSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.15 | TablemscLpSdhPathOperTable | not-accessible | mandatory | This group contains the common operational data for Path component. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.15.1 | RowmscLpSdhPathOperEntry | not-accessible | mandatory | An entry in the mscLpSdhPathOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.1 | ColumnmscLpSdhPathLopAlarm | read-only | mandatory | This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and acc… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.2 | ColumnmscLpSdhPathRxAisAlarm | read-only | mandatory | This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have … |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.3 | ColumnmscLpSdhPathRxRfiAlarm | read-only | mandatory | This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defec… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.4 | ColumnmscLpSdhPathSignalLabelMismatch | read-only | mandatory | This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM de… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.5 | ColumnmscLpSdhPathTxAis | read-only | mandatory | This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Pat… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.6 | ColumnmscLpSdhPathTxRdi | read-only | mandatory | This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.16 | TablemscLpSdhPathStatsTable | not-accessible | mandatory | This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1 | RowmscLpSdhPathStatsEntry | not-accessible | mandatory | An entry in the mscLpSdhPathStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.1 | ColumnmscLpSdhPathPathErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.2 | ColumnmscLpSdhPathPathCodeViolations | read-only | mandatory | This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over s… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.3 | ColumnmscLpSdhPathPathErroredSec | read-only | mandatory | This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more … |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.4 | ColumnmscLpSdhPathPathSevErroredSec | read-only | mandatory | This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing m… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.5 | ColumnmscLpSdhPathPathAisLopSec | read-only | mandatory | This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP d… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.6 | ColumnmscLpSdhPathPathUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 co… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.7 | ColumnmscLpSdhPathPathFailures | read-only | mandatory | This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.8 | ColumnmscLpSdhPathFarEndPathErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state. |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.9 | ColumnmscLpSdhPathFarEndPathCodeViolations | read-only | mandatory | This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.10 | ColumnmscLpSdhPathFarEndPathErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing … |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.11 | ColumnmscLpSdhPathFarEndPathSevErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals … |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.12 | ColumnmscLpSdhPathFarEndPathAisLopSec | read-only | mandatory | This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.13 | ColumnmscLpSdhPathFarEndPathUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at th… |
| 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.14 | ColumnmscLpSdhPathFarEndPathFailures | read-only | mandatory | This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared. |
| 1.3.6.1.4.1.562.36.2.1.12.15.3 | NodemscLpSdhTest | |||
| 1.3.6.1.4.1.562.36.2.1.12.15.3.1 | TablemscLpSdhTestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpSdhTest components. |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.1.1 | RowmscLpSdhTestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpSdhTest component. |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.1 | ColumnmscLpSdhTestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpSdhTest components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.2 | ColumnmscLpSdhTestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.4 | ColumnmscLpSdhTestStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpSdhTest tables. |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.10 | ColumnmscLpSdhTestIndex | not-accessible | mandatory | This variable represents the index for the mscLpSdhTest tables. |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.10 | TablemscLpSdhTestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.10.1 | RowmscLpSdhTestStateEntry | not-accessible | mandatory | An entry in the mscLpSdhTestStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.10.1.1 | ColumnmscLpSdhTestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.10.1.2 | ColumnmscLpSdhTestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.10.1.3 | ColumnmscLpSdhTestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.11 | TablemscLpSdhTestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.11.1 | RowmscLpSdhTestSetupEntry | not-accessible | mandatory | An entry in the mscLpSdhTestSetupTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.1 | ColumnmscLpSdhTestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.2 | ColumnmscLpSdhTestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.3 | ColumnmscLpSdhTestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.4 | ColumnmscLpSdhTestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.5 | ColumnmscLpSdhTestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.6 | ColumnmscLpSdhTestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.7 | ColumnmscLpSdhTestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.8 | ColumnmscLpSdhTestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.12 | TablemscLpSdhTestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1 | RowmscLpSdhTestResultsEntry | not-accessible | mandatory | An entry in the mscLpSdhTestResultsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.1 | ColumnmscLpSdhTestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.2 | ColumnmscLpSdhTestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.3 | ColumnmscLpSdhTestCauseOfTermination | read-only | mandatory | This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. t… |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.4 | ColumnmscLpSdhTestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.5 | ColumnmscLpSdhTestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.6 | ColumnmscLpSdhTestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.7 | ColumnmscLpSdhTestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.8 | ColumnmscLpSdhTestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.9 | ColumnmscLpSdhTestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.10 | ColumnmscLpSdhTestErroredFrmRx | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.11 | ColumnmscLpSdhTestBitErrorRate | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.15.10 | TablemscLpSdhProvTable | not-accessible | mandatory | This group contains all of the provisioning data for a Sonet or Sdh component. |
| 1.3.6.1.4.1.562.36.2.1.12.15.10.1 | RowmscLpSdhProvEntry | not-accessible | mandatory | An entry in the mscLpSdhProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.10.1.1 | ColumnmscLpSdhClockingSource | read-write | mandatory | This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its … |
| 1.3.6.1.4.1.562.36.2.1.12.15.11 | TablemscLpSdhCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.12.15.11.1 | RowmscLpSdhCidDataEntry | not-accessible | mandatory | An entry in the mscLpSdhCidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.11.1.1 | ColumnmscLpSdhCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.12.15.12 | TablemscLpSdhAdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.36.2.1.12.15.12.1 | RowmscLpSdhAdminInfoEntry | not-accessible | mandatory | An entry in the mscLpSdhAdminInfoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.12.1.1 | ColumnmscLpSdhVendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.15.12.1.2 | ColumnmscLpSdhCommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.15.13 | TablemscLpSdhIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.12.15.13.1 | RowmscLpSdhIfEntryEntry | not-accessible | mandatory | An entry in the mscLpSdhIfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.13.1.1 | ColumnmscLpSdhIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.12.15.13.1.2 | ColumnmscLpSdhIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.12.15.14 | TablemscLpSdhOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.12.15.14.1 | RowmscLpSdhOperStatusEntry | not-accessible | mandatory | An entry in the mscLpSdhOperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.14.1.1 | ColumnmscLpSdhSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.12.15.15 | TablemscLpSdhStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.12.15.15.1 | RowmscLpSdhStateEntry | not-accessible | mandatory | An entry in the mscLpSdhStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.15.1.1 | ColumnmscLpSdhAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.15.15.1.2 | ColumnmscLpSdhOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.15.15.1.3 | ColumnmscLpSdhUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.15.15.1.4 | ColumnmscLpSdhAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.12.15.15.1.5 | ColumnmscLpSdhProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.12.15.15.1.6 | ColumnmscLpSdhControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.12.15.15.1.7 | ColumnmscLpSdhAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.12.15.15.1.8 | ColumnmscLpSdhStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.12.15.15.1.9 | ColumnmscLpSdhUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.12.15.16 | TablemscLpSdhOperTable | not-accessible | mandatory | This group contains the common operational data for Sonet or Sdh component. |
| 1.3.6.1.4.1.562.36.2.1.12.15.16.1 | RowmscLpSdhOperEntry | not-accessible | mandatory | An entry in the mscLpSdhOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.16.1.1 | ColumnmscLpSdhLosAlarm | read-only | mandatory | This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and acc… |
| 1.3.6.1.4.1.562.36.2.1.12.15.16.1.2 | ColumnmscLpSdhLofAlarm | read-only | mandatory | This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accum… |
| 1.3.6.1.4.1.562.36.2.1.12.15.16.1.3 | ColumnmscLpSdhRxAisAlarm | read-only | mandatory | This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have b… |
| 1.3.6.1.4.1.562.36.2.1.12.15.16.1.4 | ColumnmscLpSdhRxRfiAlarm | read-only | mandatory | This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure … |
| 1.3.6.1.4.1.562.36.2.1.12.15.16.1.5 | ColumnmscLpSdhTxAis | read-only | mandatory | This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the… |
| 1.3.6.1.4.1.562.36.2.1.12.15.16.1.6 | ColumnmscLpSdhTxRdi | read-only | mandatory | This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon t… |
| 1.3.6.1.4.1.562.36.2.1.12.15.16.1.7 | ColumnmscLpSdhUnusableTxClockRefAlarm | read-only | mandatory | This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port p… |
| 1.3.6.1.4.1.562.36.2.1.12.15.17 | TablemscLpSdhStatsTable | not-accessible | mandatory | This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reac… |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1 | RowmscLpSdhStatsEntry | not-accessible | mandatory | An entry in the mscLpSdhStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.1 | ColumnmscLpSdhRunningTime | read-only | mandatory | This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts t… |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.2 | ColumnmscLpSdhErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state. |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.3 | ColumnmscLpSdhSectCodeViolations | read-only | mandatory | This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for s… |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.4 | ColumnmscLpSdhSectErroredSec | read-only | mandatory | This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or mo… |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.5 | ColumnmscLpSdhSectSevErroredSec | read-only | mandatory | This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containin… |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.6 | ColumnmscLpSdhSectLosSec | read-only | mandatory | This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or mo… |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.7 | ColumnmscLpSdhSectSevErroredFrmSec | read-only | mandatory | This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals c… |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.8 | ColumnmscLpSdhSectFailures | read-only | mandatory | This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared. |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.9 | ColumnmscLpSdhLineCodeViolations | read-only | mandatory | This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for sec… |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.10 | ColumnmscLpSdhLineErroredSec | read-only | mandatory | This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more … |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.11 | ColumnmscLpSdhLineSevErroredSec | read-only | mandatory | This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing m… |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.12 | ColumnmscLpSdhLineAisSec | read-only | mandatory | This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more … |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.13 | ColumnmscLpSdhLineUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 co… |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.14 | ColumnmscLpSdhLineFailures | read-only | mandatory | This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared. |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.15 | ColumnmscLpSdhFarEndLineErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state. |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.16 | ColumnmscLpSdhFarEndLineCodeViolations | read-only | mandatory | This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far… |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.17 | ColumnmscLpSdhFarEndLineErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing … |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.18 | ColumnmscLpSdhFarEndLineSevErroredSec | read-only | mandatory | This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals … |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.19 | ColumnmscLpSdhFarEndLineAisSec | read-only | mandatory | This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more… |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.20 | ColumnmscLpSdhFarEndLineUnavailSec | read-only | mandatory | This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at th… |
| 1.3.6.1.4.1.562.36.2.1.12.15.17.1.21 | ColumnmscLpSdhFarEndLineFailures | read-only | mandatory | This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared. |
| 1.3.6.1.4.1.562.36.2.1.12.16 | NodemscLpJT2 | |||
| 1.3.6.1.4.1.562.36.2.1.12.16.1 | TablemscLpJT2RowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpJT2 components. |
| 1.3.6.1.4.1.562.36.2.1.12.16.1.1 | RowmscLpJT2RowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpJT2 component. |
| 1.3.6.1.4.1.562.36.2.1.12.16.1.1.1 | ColumnmscLpJT2RowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpJT2 components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.16.1.1.2 | ColumnmscLpJT2ComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.16.1.1.4 | ColumnmscLpJT2StorageType | read-only | mandatory | This variable represents the storage type value for the mscLpJT2 tables. |
| 1.3.6.1.4.1.562.36.2.1.12.16.1.1.10 | ColumnmscLpJT2Index | not-accessible | mandatory | This variable represents the index for the mscLpJT2 tables. |
| 1.3.6.1.4.1.562.36.2.1.12.16.2 | NodemscLpJT2Test | |||
| 1.3.6.1.4.1.562.36.2.1.12.16.2.1 | TablemscLpJT2TestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpJT2Test components. |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.1.1 | RowmscLpJT2TestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpJT2Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.1 | ColumnmscLpJT2TestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpJT2Test components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.2 | ColumnmscLpJT2TestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.4 | ColumnmscLpJT2TestStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpJT2Test tables. |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.10 | ColumnmscLpJT2TestIndex | not-accessible | mandatory | This variable represents the index for the mscLpJT2Test tables. |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.10 | TablemscLpJT2TestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.10.1 | RowmscLpJT2TestStateEntry | not-accessible | mandatory | An entry in the mscLpJT2TestStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.10.1.1 | ColumnmscLpJT2TestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.10.1.2 | ColumnmscLpJT2TestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.10.1.3 | ColumnmscLpJT2TestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.11 | TablemscLpJT2TestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.11.1 | RowmscLpJT2TestSetupEntry | not-accessible | mandatory | An entry in the mscLpJT2TestSetupTable. |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.1 | ColumnmscLpJT2TestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.2 | ColumnmscLpJT2TestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.3 | ColumnmscLpJT2TestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.4 | ColumnmscLpJT2TestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.5 | ColumnmscLpJT2TestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.6 | ColumnmscLpJT2TestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.7 | ColumnmscLpJT2TestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.8 | ColumnmscLpJT2TestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.12 | TablemscLpJT2TestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1 | RowmscLpJT2TestResultsEntry | not-accessible | mandatory | An entry in the mscLpJT2TestResultsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.1 | ColumnmscLpJT2TestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.2 | ColumnmscLpJT2TestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.3 | ColumnmscLpJT2TestCauseOfTermination | read-only | mandatory | This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. t… |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.4 | ColumnmscLpJT2TestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.5 | ColumnmscLpJT2TestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.6 | ColumnmscLpJT2TestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.7 | ColumnmscLpJT2TestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.8 | ColumnmscLpJT2TestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.9 | ColumnmscLpJT2TestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.10 | ColumnmscLpJT2TestErroredFrmRx | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.11 | ColumnmscLpJT2TestBitErrorRate | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.16.3 | NodemscLpJT2Cell | |||
| 1.3.6.1.4.1.562.36.2.1.12.16.3.1 | TablemscLpJT2CellRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpJT2Cell components. |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.1.1 | RowmscLpJT2CellRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpJT2Cell component. |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.1 | ColumnmscLpJT2CellRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpJT2Cell components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.2 | ColumnmscLpJT2CellComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.4 | ColumnmscLpJT2CellStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpJT2Cell tables. |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.10 | ColumnmscLpJT2CellIndex | not-accessible | mandatory | This variable represents the index for the mscLpJT2Cell tables. |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.10 | TablemscLpJT2CellProvTable | not-accessible | mandatory | This group contains the provisioning attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.10.1 | RowmscLpJT2CellProvEntry | not-accessible | mandatory | An entry in the mscLpJT2CellProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.10.1.1 | ColumnmscLpJT2CellAlarmActDelay | read-write | mandatory | This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The tim… |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.10.1.2 | ColumnmscLpJT2CellScrambleCellPayload | read-write | mandatory | Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit p… |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.10.1.3 | ColumnmscLpJT2CellCorrectSingleBitHeaderErrors | read-write | mandatory | This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affecte… |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.11 | TablemscLpJT2CellOperTable | not-accessible | mandatory | This group contains the common operational attributes for the AtmCell component. |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.11.1 | RowmscLpJT2CellOperEntry | not-accessible | mandatory | An entry in the mscLpJT2CellOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.11.1.1 | ColumnmscLpJT2CellLcdAlarm | read-only | mandatory | This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been obser… |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.12 | TablemscLpJT2CellStatsTable | not-accessible | mandatory | This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it re… |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.12.1 | RowmscLpJT2CellStatsEntry | not-accessible | mandatory | An entry in the mscLpJT2CellStatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.1 | ColumnmscLpJT2CellUncorrectableHecErrors | read-only | mandatory | This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an… |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.2 | ColumnmscLpJT2CellSevErroredSec | read-only | mandatory | This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declar… |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.3 | ColumnmscLpJT2CellReceiveCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a peri… |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.4 | ColumnmscLpJT2CellTransmitCellUtilization | read-only | mandatory | This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a p… |
| 1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.5 | ColumnmscLpJT2CellCorrectableHeaderErrors | read-only | mandatory | This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibit… |
| 1.3.6.1.4.1.562.36.2.1.12.16.10 | TablemscLpJT2CidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.12.16.10.1 | RowmscLpJT2CidDataEntry | not-accessible | mandatory | An entry in the mscLpJT2CidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.12.16.10.1.1 | ColumnmscLpJT2CustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.12.16.11 | TablemscLpJT2ProvTable | not-accessible | mandatory | This group contains all of the JT2 specific provisioning data for a JT2 component. |
| 1.3.6.1.4.1.562.36.2.1.12.16.11.1 | RowmscLpJT2ProvEntry | not-accessible | mandatory | An entry in the mscLpJT2ProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.16.11.1.1 | ColumnmscLpJT2ClockingSource | read-write | mandatory | This attribute defines the source of the transmit clock for the JT2 line. When the clocking source is selected from local, the oscillator on the port generates… |
| 1.3.6.1.4.1.562.36.2.1.12.16.11.1.2 | ColumnmscLpJT2LineLength | read-write | mandatory | This attribute defines the line length for equalization calculations for the JT2 line. The range is between 0 and 480 feet (1 metre = 3.28 feet). |
| 1.3.6.1.4.1.562.36.2.1.12.16.11.1.3 | ColumnmscLpJT2ApplicationFramerName | read-write | mandatory | This attribute defines the link to the software stack. It defines which application is running on top of the JT2 component. |
| 1.3.6.1.4.1.562.36.2.1.12.16.12 | TablemscLpJT2IfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.12.16.12.1 | RowmscLpJT2IfEntryEntry | not-accessible | mandatory | An entry in the mscLpJT2IfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.12.16.12.1.1 | ColumnmscLpJT2IfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.12.16.12.1.2 | ColumnmscLpJT2IfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.12.16.13 | TablemscLpJT2OperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.12.16.13.1 | RowmscLpJT2OperStatusEntry | not-accessible | mandatory | An entry in the mscLpJT2OperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.12.16.13.1.1 | ColumnmscLpJT2SnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.12.16.14 | TablemscLpJT2StateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.12.16.14.1 | RowmscLpJT2StateEntry | not-accessible | mandatory | An entry in the mscLpJT2StateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.16.14.1.1 | ColumnmscLpJT2AdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.16.14.1.2 | ColumnmscLpJT2OperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.16.14.1.3 | ColumnmscLpJT2UsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.16.14.1.4 | ColumnmscLpJT2AvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.12.16.14.1.5 | ColumnmscLpJT2ProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.12.16.14.1.6 | ColumnmscLpJT2ControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.12.16.14.1.7 | ColumnmscLpJT2AlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.12.16.14.1.8 | ColumnmscLpJT2StandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.12.16.14.1.9 | ColumnmscLpJT2UnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.12.16.15 | TablemscLpJT2OperTable | not-accessible | mandatory | This group contains the JT2 specific operational data for a JT2 component in a digital hierarchy interface. |
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1 | RowmscLpJT2OperEntry | not-accessible | mandatory | An entry in the mscLpJT2OperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.1 | ColumnmscLpJT2LosAlarm | read-only | mandatory | This attribute displays whether a LOS (Loss of Signal) alarm state is entered. An LOS alarm state is entered when LOS defects have been observed and accumulate… |
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.2 | ColumnmscLpJT2LofAlarm | read-only | mandatory | This attribute indicates whether a LOF (Loss of Frame) alarm state is entered. A LOF alarm state is entered when LOF defects are observed and accumulated for 2… |
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.3 | ColumnmscLpJT2RxAisPhysicalAlarm | read-only | mandatory | This attribute indicates whether a Physical AIS alarm state is entered. A Physical AIS alarm state is entered when a Physical AIS defect is observed and accumu… |
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.4 | ColumnmscLpJT2RxAisPayloadAlarm | read-only | mandatory | This attribute indicates whether a Payload AIS alarm state is entered. A Payload AIS alarm state is entered when a Payload AIS defect persists for a period of … |
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.5 | ColumnmscLpJT2RxRaiAlarm | read-only | mandatory | This attribute indicates whether a Received RAI alarm state is entered. A received RAI alarm state is entered when the RAI signal is detected on the incoming J… |
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.6 | ColumnmscLpJT2TxAisPhysicalAlarm | read-only | mandatory | This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the outgoing JT2 line. Currently the JT2 port only transmits a … |
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.7 | ColumnmscLpJT2TxRaiAlarm | read-only | mandatory | This attribute indicates whether an RAI defect indication pattern is being sent on the out-going JT2 line. The RAI alarm pattern is transmitted in the 4 kbit/s… |
| 1.3.6.1.4.1.562.36.2.1.12.16.16 | TablemscLpJT2StatsTable | not-accessible | mandatory | This group contains the statistical data for a JT2 component in a digital hierarchy interface. |
| 1.3.6.1.4.1.562.36.2.1.12.16.16.1 | RowmscLpJT2StatsEntry | not-accessible | mandatory | An entry in the mscLpJT2StatsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.16.16.1.1 | ColumnmscLpJT2RunningTime | read-only | mandatory | This attribute indicates the number of seconds since the JT2 component was activated and placed in an unlocked state or used for operational testing. All the o… |
| 1.3.6.1.4.1.562.36.2.1.12.16.16.1.2 | ColumnmscLpJT2ErrorFreeSec | read-only | mandatory | This attribute indicates the number of seconds that the JT2 port has been in an error free state. |
| 1.3.6.1.4.1.562.36.2.1.12.16.16.1.3 | ColumnmscLpJT2ErroredSec | read-only | mandatory | This attribute indicates the total number of errored seconds for the JT2 port. An errored second is declared when a second with one or more Code Violation Erro… |
| 1.3.6.1.4.1.562.36.2.1.12.16.16.1.4 | ColumnmscLpJT2SevErroredSec | read-only | mandatory | This attribute indicates the total number of severely errored seconds for the JT2 port. A severely errored second occurs when a second with 255 or more Code Vi… |
| 1.3.6.1.4.1.562.36.2.1.12.16.16.1.5 | ColumnmscLpJT2SevErroredFrmSec | read-only | mandatory | This attribute indicates the total number of severely errored framing seconds for the JT2 port. A severely errored framing second occurs when a second with one… |
| 1.3.6.1.4.1.562.36.2.1.12.16.16.1.6 | ColumnmscLpJT2UnavailSec | read-only | mandatory | This attribute indicates the total number of seconds that the interface has been in an unavailable state. An unavailable state occurs at the onset of 10 consec… |
| 1.3.6.1.4.1.562.36.2.1.12.16.16.1.7 | ColumnmscLpJT2BpvErrors | read-only | mandatory | This attribute indicates the total count of bipolar violations (BPV). A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line… |
| 1.3.6.1.4.1.562.36.2.1.12.16.16.1.8 | ColumnmscLpJT2CrcErrors | read-only | mandatory | This attribute indicates the total number of cyclic redundancy check (CRC-5) errors detected on the incoming JT2 line. The value of this attribute will wrap to… |
| 1.3.6.1.4.1.562.36.2.1.12.16.16.1.9 | ColumnmscLpJT2FrameErrors | read-only | mandatory | This attribute indicates the total number of Framing Errors that have occured on the JT2 port. A Framing Error is an error in the framing bits. The value of th… |
| 1.3.6.1.4.1.562.36.2.1.12.16.16.1.10 | ColumnmscLpJT2LosStateChanges | read-only | mandatory | This attribute indicates the total number of times that the incoming signal on the JT2 line has been lost. The value of this attribute will wrap to 0 when its … |
| 1.3.6.1.4.1.562.36.2.1.12.16.17 | TablemscLpJT2AdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.36.2.1.12.16.17.1 | RowmscLpJT2AdminInfoEntry | not-accessible | mandatory | An entry in the mscLpJT2AdminInfoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.16.17.1.1 | ColumnmscLpJT2Vendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.16.17.1.2 | ColumnmscLpJT2CommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.17 | NodemscLpHssi | |||
| 1.3.6.1.4.1.562.36.2.1.12.17.1 | TablemscLpHssiRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpHssi components. |
| 1.3.6.1.4.1.562.36.2.1.12.17.1.1 | RowmscLpHssiRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpHssi component. |
| 1.3.6.1.4.1.562.36.2.1.12.17.1.1.1 | ColumnmscLpHssiRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpHssi components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.17.1.1.2 | ColumnmscLpHssiComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.17.1.1.4 | ColumnmscLpHssiStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpHssi tables. |
| 1.3.6.1.4.1.562.36.2.1.12.17.1.1.10 | ColumnmscLpHssiIndex | not-accessible | mandatory | This variable represents the index for the mscLpHssi tables. |
| 1.3.6.1.4.1.562.36.2.1.12.17.2 | NodemscLpHssiTest | |||
| 1.3.6.1.4.1.562.36.2.1.12.17.2.1 | TablemscLpHssiTestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpHssiTest components. |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.1.1 | RowmscLpHssiTestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpHssiTest component. |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.1 | ColumnmscLpHssiTestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpHssiTest components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.2 | ColumnmscLpHssiTestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.4 | ColumnmscLpHssiTestStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpHssiTest tables. |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.10 | ColumnmscLpHssiTestIndex | not-accessible | mandatory | This variable represents the index for the mscLpHssiTest tables. |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.10 | TablemscLpHssiTestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.10.1 | RowmscLpHssiTestStateEntry | not-accessible | mandatory | An entry in the mscLpHssiTestStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.10.1.1 | ColumnmscLpHssiTestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.10.1.2 | ColumnmscLpHssiTestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.10.1.3 | ColumnmscLpHssiTestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.11 | TablemscLpHssiTestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.11.1 | RowmscLpHssiTestSetupEntry | not-accessible | mandatory | An entry in the mscLpHssiTestSetupTable. |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.1 | ColumnmscLpHssiTestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.2 | ColumnmscLpHssiTestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.3 | ColumnmscLpHssiTestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.4 | ColumnmscLpHssiTestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.5 | ColumnmscLpHssiTestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.6 | ColumnmscLpHssiTestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.7 | ColumnmscLpHssiTestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.8 | ColumnmscLpHssiTestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.12 | TablemscLpHssiTestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1 | RowmscLpHssiTestResultsEntry | not-accessible | mandatory | An entry in the mscLpHssiTestResultsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.1 | ColumnmscLpHssiTestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.2 | ColumnmscLpHssiTestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.3 | ColumnmscLpHssiTestCauseOfTermination | read-only | mandatory | This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. t… |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.4 | ColumnmscLpHssiTestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.5 | ColumnmscLpHssiTestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.6 | ColumnmscLpHssiTestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.7 | ColumnmscLpHssiTestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.8 | ColumnmscLpHssiTestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.9 | ColumnmscLpHssiTestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.10 | ColumnmscLpHssiTestErroredFrmRx | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.11 | ColumnmscLpHssiTestBitErrorRate | read-only | mandatory | This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this a… |
| 1.3.6.1.4.1.562.36.2.1.12.17.10 | TablemscLpHssiProvTable | not-accessible | mandatory | This group contains the specific provisioning data for a Hssi component. |
| 1.3.6.1.4.1.562.36.2.1.12.17.10.1 | RowmscLpHssiProvEntry | not-accessible | mandatory | An entry in the mscLpHssiProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.17.10.1.1 | ColumnmscLpHssiLinkMode | read-write | mandatory | This attribute defines the intended gender of the HSSI port. The actual gender of the port is determined by the hardware setup. In dte mode, the ta line signal… |
| 1.3.6.1.4.1.562.36.2.1.12.17.10.1.2 | ColumnmscLpHssiReadyLineState | read-write | mandatory | This attribute specifies the line signal originating from the HSSI interface that will always be turned on, provided the HSSI interface passes it diagnostics. … |
| 1.3.6.1.4.1.562.36.2.1.12.17.10.1.3 | ColumnmscLpHssiDataTransferLineState | read-write | mandatory | This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that b… |
| 1.3.6.1.4.1.562.36.2.1.12.17.10.1.5 | ColumnmscLpHssiLineSpeed | read-write | mandatory | This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. Note that the actual clo… |
| 1.3.6.1.4.1.562.36.2.1.12.17.10.1.7 | ColumnmscLpHssiApplicationFramerName | read-write | mandatory | This attribute contains the component name of a Framer which is associated with the Hssi component. |
| 1.3.6.1.4.1.562.36.2.1.12.17.11 | TablemscLpHssiCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.12.17.11.1 | RowmscLpHssiCidDataEntry | not-accessible | mandatory | An entry in the mscLpHssiCidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.12.17.11.1.1 | ColumnmscLpHssiCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.12.17.12 | TablemscLpHssiAdminInfoTable | not-accessible | mandatory | This group contains the attributes pertaining to the vendor of the equipment. |
| 1.3.6.1.4.1.562.36.2.1.12.17.12.1 | RowmscLpHssiAdminInfoEntry | not-accessible | mandatory | An entry in the mscLpHssiAdminInfoTable. |
| 1.3.6.1.4.1.562.36.2.1.12.17.12.1.1 | ColumnmscLpHssiVendor | read-write | mandatory | This is the name of the vendor supplying the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.17.12.1.2 | ColumnmscLpHssiCommentText | read-write | mandatory | Any miscellaneous text about the facility. |
| 1.3.6.1.4.1.562.36.2.1.12.17.13 | TablemscLpHssiIfEntryTable | not-accessible | mandatory | This group contains the provisionable attributes for the ifEntry. |
| 1.3.6.1.4.1.562.36.2.1.12.17.13.1 | RowmscLpHssiIfEntryEntry | not-accessible | mandatory | An entry in the mscLpHssiIfEntryTable. |
| 1.3.6.1.4.1.562.36.2.1.12.17.13.1.1 | ColumnmscLpHssiIfAdminStatus | read-write | mandatory | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing… |
| 1.3.6.1.4.1.562.36.2.1.12.17.13.1.2 | ColumnmscLpHssiIfIndex | read-only | mandatory | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| 1.3.6.1.4.1.562.36.2.1.12.17.14 | TablemscLpHssiOperStatusTable | not-accessible | mandatory | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. |
| 1.3.6.1.4.1.562.36.2.1.12.17.14.1 | RowmscLpHssiOperStatusEntry | not-accessible | mandatory | An entry in the mscLpHssiOperStatusTable. |
| 1.3.6.1.4.1.562.36.2.1.12.17.14.1.1 | ColumnmscLpHssiSnmpOperStatus | read-only | mandatory | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interfa… |
| 1.3.6.1.4.1.562.36.2.1.12.17.15 | TablemscLpHssiStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.12.17.15.1 | RowmscLpHssiStateEntry | not-accessible | mandatory | An entry in the mscLpHssiStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.17.15.1.1 | ColumnmscLpHssiAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.17.15.1.2 | ColumnmscLpHssiOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.17.15.1.3 | ColumnmscLpHssiUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.17.15.1.4 | ColumnmscLpHssiAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.12.17.15.1.5 | ColumnmscLpHssiProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.12.17.15.1.6 | ColumnmscLpHssiControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.12.17.15.1.7 | ColumnmscLpHssiAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.12.17.15.1.8 | ColumnmscLpHssiStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.12.17.15.1.9 | ColumnmscLpHssiUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.12.17.16 | TablemscLpHssiOperTable | not-accessible | mandatory | This group contains all specific operational data for a Hssi component. |
| 1.3.6.1.4.1.562.36.2.1.12.17.16.1 | RowmscLpHssiOperEntry | not-accessible | mandatory | An entry in the mscLpHssiOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.17.16.1.1 | ColumnmscLpHssiActualLinkMode | read-only | mandatory | This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The port behaves as a dce or dte… |
| 1.3.6.1.4.1.562.36.2.1.12.17.16.1.2 | ColumnmscLpHssiLineState | read-only | mandatory | This attribute contains the state of the interface signals. Description of bits: ca(0) ta(1) tm(2) la(3) lb(4) |
| 1.3.6.1.4.1.562.36.2.1.12.17.16.1.3 | ColumnmscLpHssiActualTxLineSpeed | read-only | mandatory | This attribute is the measured speed of the transmit clock. Note the reported transmit speed is in an error of +/- 10000 bit/s |
| 1.3.6.1.4.1.562.36.2.1.12.17.16.1.4 | ColumnmscLpHssiActualRxLineSpeed | read-only | mandatory | This attribute is the measured speed of the receive clock. Note the reported receive speed is in an error of +/- 10000 bit/s |
| 1.3.6.1.4.1.562.36.2.1.12.17.16.1.5 | ColumnmscLpHssiDataXferStateChanges | read-only | mandatory | This attribute contains the number of times that the line has entered or exited the data transfer state. |
| 1.3.6.1.4.1.562.36.2.1.12.23 | NodemscLpEng | |||
| 1.3.6.1.4.1.562.36.2.1.12.23.1 | TablemscLpEngRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpEng components. |
| 1.3.6.1.4.1.562.36.2.1.12.23.1.1 | RowmscLpEngRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpEng component. |
| 1.3.6.1.4.1.562.36.2.1.12.23.1.1.1 | ColumnmscLpEngRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of mscLpEng components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.23.1.1.2 | ColumnmscLpEngComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.23.1.1.4 | ColumnmscLpEngStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpEng tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.1.1.10 | ColumnmscLpEngIndex | not-accessible | mandatory | This variable represents the index for the mscLpEng tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.2 | NodemscLpEngDs | |||
| 1.3.6.1.4.1.562.36.2.1.12.23.2.1 | TablemscLpEngDsRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpEngDs components. |
| 1.3.6.1.4.1.562.36.2.1.12.23.2.1.1 | RowmscLpEngDsRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpEngDs component. |
| 1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.1 | ColumnmscLpEngDsRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpEngDs components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.2 | ColumnmscLpEngDsComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.4 | ColumnmscLpEngDsStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpEngDs tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.10 | ColumnmscLpEngDsIndex | not-accessible | mandatory | This variable represents the index for the mscLpEngDs tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.2.2 | NodemscLpEngDsOv | |||
| 1.3.6.1.4.1.562.36.2.1.12.23.2.2.1 | TablemscLpEngDsOvRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of mscLpEngDsOv components. |
| 1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1 | RowmscLpEngDsOvRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single mscLpEngDsOv component. |
| 1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.1 | ColumnmscLpEngDsOvRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of mscLpEngDsOv components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.2 | ColumnmscLpEngDsOvComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.4 | ColumnmscLpEngDsOvStorageType | read-only | mandatory | This variable represents the storage type value for the mscLpEngDsOv tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.10 | ColumnmscLpEngDsOvIndex | not-accessible | mandatory | This variable represents the index for the mscLpEngDsOv tables. |
| 1.3.6.1.4.1.562.36.2.1.12.23.2.2.10 | TablemscLpEngDsOvProvTable | not-accessible | mandatory | This group contains provisionable attributes for the DataStream Ov components under Lp Engineering. DESCRIPTION |
| 1.3.6.1.4.1.562.36.2.1.12.23.2.2.10.1 | RowmscLpEngDsOvProvEntry | not-accessible | mandatory | An entry in the mscLpEngDsOvProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.2.2.10.1.1 | ColumnmscLpEngDsOvAgentQueueSize | read-write | mandatory | This attribute specifies the maximum size of the DCS Agent's queue for this data stream on this LP. For more details on the defaults and other information, ref… |
| 1.3.6.1.4.1.562.36.2.1.12.23.2.10 | TablemscLpEngDsOperTable | not-accessible | mandatory | This group contains operational attributes for the DataStream components under Lp Engineering. |
| 1.3.6.1.4.1.562.36.2.1.12.23.2.10.1 | RowmscLpEngDsOperEntry | not-accessible | mandatory | An entry in the mscLpEngDsOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.23.2.10.1.1 | ColumnmscLpEngDsAgentQueueSize | read-only | mandatory | This attribute indicates the maximum size of the DCS Agent queue size maximum for a DCS data stream on the LP. It is the maximum size to which the Agent's curr… |
| 1.3.6.1.4.1.562.36.2.1.12.100 | TablemscLpProvTable | not-accessible | mandatory | This Group contains the provisionable attributes for the LP component. |
| 1.3.6.1.4.1.562.36.2.1.12.100.1 | RowmscLpProvEntry | not-accessible | mandatory | An entry in the mscLpProvTable. |
| 1.3.6.1.4.1.562.36.2.1.12.100.1.1 | ColumnmscLpMainCard | read-write | mandatory | This is the preferred processor card on which this LP should be assigned. |
| 1.3.6.1.4.1.562.36.2.1.12.100.1.2 | ColumnmscLpSpareCard | read-write | mandatory | This is the spare processor card on which this LP should be assigned. |
| 1.3.6.1.4.1.562.36.2.1.12.100.1.3 | ColumnmscLpLogicalProcessorType | read-write | mandatory | This is the Logical Processor Type (LPT) that determines which software this LP will run. |
| 1.3.6.1.4.1.562.36.2.1.12.101 | TablemscLpCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.36.2.1.12.101.1 | RowmscLpCidDataEntry | not-accessible | mandatory | An entry in the mscLpCidDataTable. |
| 1.3.6.1.4.1.562.36.2.1.12.101.1.1 | ColumnmscLpCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.36.2.1.12.102 | TablemscLpStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.36.2.1.12.102.1 | RowmscLpStateEntry | not-accessible | mandatory | An entry in the mscLpStateTable. |
| 1.3.6.1.4.1.562.36.2.1.12.102.1.1 | ColumnmscLpAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.36.2.1.12.102.1.2 | ColumnmscLpOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.36.2.1.12.102.1.3 | ColumnmscLpUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.36.2.1.12.102.1.4 | ColumnmscLpAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.36.2.1.12.102.1.5 | ColumnmscLpProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.36.2.1.12.102.1.6 | ColumnmscLpControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.36.2.1.12.102.1.7 | ColumnmscLpAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.36.2.1.12.102.1.8 | ColumnmscLpStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.36.2.1.12.102.1.9 | ColumnmscLpUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.36.2.1.12.103 | TablemscLpOperTable | not-accessible | mandatory | This Group contains the operational attributes for the LP component. |
| 1.3.6.1.4.1.562.36.2.1.12.103.1 | RowmscLpOperEntry | not-accessible | mandatory | An entry in the mscLpOperTable. |
| 1.3.6.1.4.1.562.36.2.1.12.103.1.1 | ColumnmscLpActiveCard | read-only | mandatory | This attribute indicates on which card this LP is currently running (if any). |
| 1.3.6.1.4.1.562.36.2.1.12.103.1.2 | ColumnmscLpMainCardStatus | read-only | mandatory | This attribute specifies the status of this LP's main card. The following values have been defined: notProvisioned No main card has been provisioned. notAvaila… |
| 1.3.6.1.4.1.562.36.2.1.12.103.1.3 | ColumnmscLpSpareCardStatus | read-only | mandatory | This attribute specifies the status of this LP's spare card. The following values have been defined: notProvisioned No spare card has been provisioned. notAvai… |
| 1.3.6.1.4.1.562.36.2.1.12.103.1.4 | ColumnmscLpRestartOnCpSwitch | read-only | mandatory | This attribute indicates whether the Lp always restarts upon a CP switchover. The value is true if the featureList of the associated Sw Lpt component contains … |
| 1.3.6.1.4.1.562.36.2.1.12.103.1.5 | ColumnmscLpScheduledSwitchover | read-only | mandatory | This attribute indicates the execution time of the scheduled switchover. When there is no switchover scheduled the time is equals to 0 (0000-00-00 00:00). |
| 1.3.6.1.4.1.562.36.2.1.12.104 | TablemscLpUtilTable | not-accessible | mandatory | This group contains the operational attributes that specify the processor's utilization levels. When this group exists for an LP component, the attributes are … |
| 1.3.6.1.4.1.562.36.2.1.12.104.1 | RowmscLpUtilEntry | not-accessible | mandatory | An entry in the mscLpUtilTable. |
| 1.3.6.1.4.1.562.36.2.1.12.104.1.1 | ColumnmscLpTimeInterval | read-only | mandatory | This attribute indicates the time period (in minutes) for which the average, minimum and maximum utilization values are calculated. This attribute is reset to … |
| 1.3.6.1.4.1.562.36.2.1.12.104.1.2 | ColumnmscLpCpuUtil | read-only | mandatory | This attribute indicates an approximation of the current processor utilization level (expressed as a percentage). |
| 1.3.6.1.4.1.562.36.2.1.12.104.1.3 | ColumnmscLpCpuUtilAvg | read-only | mandatory | This attribute indicates an average processor utilization level over the specified time period, timeInterval. This average is calculated based on one minute CP… |
| 1.3.6.1.4.1.562.36.2.1.12.104.1.4 | ColumnmscLpCpuUtilAvgMin | read-only | mandatory | This attribute indicates the minimum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averag… |
| 1.3.6.1.4.1.562.36.2.1.12.104.1.5 | ColumnmscLpCpuUtilAvgMax | read-only | mandatory | This attribute indicates the maximum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averag… |
| 1.3.6.1.4.1.562.36.2.1.12.104.1.6 | ColumnmscLpMsgBlockUsage | read-only | mandatory | This attribute indicates the processor's current shared message block memory utilization. If there is no shared memory on the card, this attribute indicates 0. |
| 1.3.6.1.4.1.562.36.2.1.12.104.1.7 | ColumnmscLpMsgBlockUsageAvg | read-only | mandatory | This attribute indicates the processor's average memory utilization of shared message blocks, calculated over a specified time period, timeInterval. This utili… |
| 1.3.6.1.4.1.562.36.2.1.12.104.1.8 | ColumnmscLpMsgBlockUsageAvgMin | read-only | mandatory | This attribute indicates the processor's minimum memory utilization of shared message blocks, calculated over a specified time period, timeInterval. This utili… |
| 1.3.6.1.4.1.562.36.2.1.12.104.1.9 | ColumnmscLpMsgBlockUsageAvgMax | read-only | mandatory | This attribute indicates the processor's maximum memory utilization of shared message blocks, calculated over a specified time period, timeInterval. This utili… |
| 1.3.6.1.4.1.562.36.2.1.12.104.1.10 | ColumnmscLpLocalMsgBlockUsage | read-only | mandatory | This attribute indicates the processor's current memory utilization of message blocks which are used for local messaging on the card. |
| 1.3.6.1.4.1.562.36.2.1.12.104.1.11 | ColumnmscLpLocalMsgBlockUsageAvg | read-only | mandatory | This attribute indicates the processor's average memory utilization of message blocks used for local messaging on the card, calculated over a specified time pe… |
| 1.3.6.1.4.1.562.36.2.1.12.104.1.12 | ColumnmscLpLocalMsgBlockUsageMin | read-only | mandatory | This attribute indicates the processor's minimum memory utilization of message blocks used for local messaging on the card, calculated over a specified time pe… |
| 1.3.6.1.4.1.562.36.2.1.12.104.1.13 | ColumnmscLpLocalMsgBlockUsageMax | read-only | mandatory | This attribute indicates the processor's maximum memory utilization of message blocks used for local messaging on the card, calculated over a specified time pe… |
| 1.3.6.1.4.1.562.36.2.1.12.105 | TablemscLpCapTable | not-accessible | mandatory | This group contains the operational attributes that specify the processor's capacity levels. When this group exists for an LP component, the attributes are rep… |
| 1.3.6.1.4.1.562.36.2.1.12.105.1 | RowmscLpCapEntry | not-accessible | mandatory | An entry in the mscLpCapTable. |
| 1.3.6.1.4.1.562.36.2.1.12.105.1.1 | ColumnmscLpMsgBlockCapacity | read-only | mandatory | This attribute indicates the processor card's shared message block memory capacity. |
| 1.3.6.1.4.1.562.36.2.1.12.105.1.2 | ColumnmscLpLocalMsgBlockCapacity | read-only | mandatory | This attribute indicates the processor card's local message block memory capacity. These message blocks are used for local messaging on the card. |
| 1.3.6.1.4.1.562.36.2.1.12.242 | TablemscLpLinkToApplicationsTable | not-accessible | mandatory | This attribute allows applications to link themselves directly to the LP component. |
| 1.3.6.1.4.1.562.36.2.1.12.242.1 | RowmscLpLinkToApplicationsEntry | not-accessible | mandatory | An entry in the mscLpLinkToApplicationsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.242.1.1 | ColumnmscLpLinkToApplicationsValue | read-only | mandatory | This variable represents both the value and the index for the mscLpLinkToApplicationsTable. |
| 1.3.6.1.4.1.562.36.2.1.12.244 | TablemscLpMemoryCapacityTable | not-accessible | mandatory | This attribute indicates the processor card's memory capacity for each type of memory. |
| 1.3.6.1.4.1.562.36.2.1.12.244.1 | RowmscLpMemoryCapacityEntry | not-accessible | mandatory | An entry in the mscLpMemoryCapacityTable. |
| 1.3.6.1.4.1.562.36.2.1.12.244.1.1 | ColumnmscLpMemoryCapacityIndex | not-accessible | mandatory | This variable represents the mscLpMemoryCapacityTable specific index for the mscLpMemoryCapacityTable. |
| 1.3.6.1.4.1.562.36.2.1.12.244.1.2 | ColumnmscLpMemoryCapacityValue | read-only | mandatory | This variable represents an individual value for the mscLpMemoryCapacityTable. |
| 1.3.6.1.4.1.562.36.2.1.12.245 | TablemscLpMemoryUsageTable | not-accessible | mandatory | This attribute indicates the processor's current memory utilization for each type of memory. |
| 1.3.6.1.4.1.562.36.2.1.12.245.1 | RowmscLpMemoryUsageEntry | not-accessible | mandatory | An entry in the mscLpMemoryUsageTable. |
| 1.3.6.1.4.1.562.36.2.1.12.245.1.1 | ColumnmscLpMemoryUsageIndex | not-accessible | mandatory | This variable represents the mscLpMemoryUsageTable specific index for the mscLpMemoryUsageTable. |
| 1.3.6.1.4.1.562.36.2.1.12.245.1.2 | ColumnmscLpMemoryUsageValue | read-only | mandatory | This variable represents an individual value for the mscLpMemoryUsageTable. |
| 1.3.6.1.4.1.562.36.2.1.12.276 | TablemscLpMemoryUsageAvgTable | not-accessible | mandatory | This attribute indicates the processor's average memory utilization for each type of memory in the specified time period, timeInterval. This value is calculate… |
| 1.3.6.1.4.1.562.36.2.1.12.276.1 | RowmscLpMemoryUsageAvgEntry | not-accessible | mandatory | An entry in the mscLpMemoryUsageAvgTable. |
| 1.3.6.1.4.1.562.36.2.1.12.276.1.1 | ColumnmscLpMemoryUsageAvgIndex | not-accessible | mandatory | This variable represents the mscLpMemoryUsageAvgTable specific index for the mscLpMemoryUsageAvgTable. |
| 1.3.6.1.4.1.562.36.2.1.12.276.1.2 | ColumnmscLpMemoryUsageAvgValue | read-only | mandatory | This variable represents an individual value for the mscLpMemoryUsageAvgTable. |
| 1.3.6.1.4.1.562.36.2.1.12.277 | TablemscLpMemoryUsageAvgMinTable | not-accessible | mandatory | This attribute indicates the processor's minimum memory utilization for each type of memory in the specified time period, timeInterval. This value is calculate… |
| 1.3.6.1.4.1.562.36.2.1.12.277.1 | RowmscLpMemoryUsageAvgMinEntry | not-accessible | mandatory | An entry in the mscLpMemoryUsageAvgMinTable. |
| 1.3.6.1.4.1.562.36.2.1.12.277.1.1 | ColumnmscLpMemoryUsageAvgMinIndex | not-accessible | mandatory | This variable represents the mscLpMemoryUsageAvgMinTable specific index for the mscLpMemoryUsageAvgMinTable. |
| 1.3.6.1.4.1.562.36.2.1.12.277.1.2 | ColumnmscLpMemoryUsageAvgMinValue | read-only | mandatory | This variable represents an individual value for the mscLpMemoryUsageAvgMinTable. |
| 1.3.6.1.4.1.562.36.2.1.12.278 | TablemscLpMemoryUsageAvgMaxTable | not-accessible | mandatory | This attribute indicates the processor's maximum memory utilization for each type of memory in the specified time period, timeInterval. This value is calculate… |
| 1.3.6.1.4.1.562.36.2.1.12.278.1 | RowmscLpMemoryUsageAvgMaxEntry | not-accessible | mandatory | An entry in the mscLpMemoryUsageAvgMaxTable. |
| 1.3.6.1.4.1.562.36.2.1.12.278.1.1 | ColumnmscLpMemoryUsageAvgMaxIndex | not-accessible | mandatory | This variable represents the mscLpMemoryUsageAvgMaxTable specific index for the mscLpMemoryUsageAvgMaxTable. |
| 1.3.6.1.4.1.562.36.2.1.12.278.1.2 | ColumnmscLpMemoryUsageAvgMaxValue | read-only | mandatory | This variable represents an individual value for the mscLpMemoryUsageAvgMaxTable. |
| 1.3.6.1.4.1.562.36.2.2.11 | NodelogicalProcessorMIB | |||
| 1.3.6.1.4.1.562.36.2.2.11.1 | NodelogicalProcessorGroup | |||
| 1.3.6.1.4.1.562.36.2.2.11.1.1 | NodelogicalProcessorGroupCA | |||
| 1.3.6.1.4.1.562.36.2.2.11.1.1.3 | NodelogicalProcessorGroupCA02 | |||
| 1.3.6.1.4.1.562.36.2.2.11.1.1.3.2 | NodelogicalProcessorGroupCA02A | |||
| 1.3.6.1.4.1.562.36.2.2.11.3 | NodelogicalProcessorCapabilities | |||
| 1.3.6.1.4.1.562.36.2.2.11.3.1 | NodelogicalProcessorCapabilitiesCA | |||
| 1.3.6.1.4.1.562.36.2.2.11.3.1.3 | NodelogicalProcessorCapabilitiesCA02 | |||
| 1.3.6.1.4.1.562.36.2.2.11.3.1.3.2 | NodelogicalProcessorCapabilitiesCA02A |