OC-STB-HOST-MIB
371 objects
Licensed under the Apache License, Version 2.0 (the 'License'); you may not use this file except in compliance with the License. You may obtain a copy of the License at: http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an 'AS IS' BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. This MIB module contains the management objects for the management of OpenCable Set-top Host Device.
Imported Objects
| CLAB-DEF-MIB | -- RFC 2790 clabProjOpenCable |
| DOCS-IF-MIB | TenthdB TenthdBmV |
| HOST-RESOURCES-MIB | -- RFC 4001 hrDeviceIndex hrStorageIndex |
| INET-ADDRESS-MIB | -- RFC 3411 InetAddressType InetAddress |
| SNMP-FRAMEWORK-MIB | -- RFC 2579 SnmpAdminString |
| SNMPv2-CONF | -- RFC 4546 OBJECT-GROUP MODULE-COMPLIANCE |
| SNMPv2-SMI | -- RFC 2580 Integer32 Counter32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | -- RFC 2578 AutonomousType DateAndTime DisplayString MacAddress PhysAddress RowPointer TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.3.1 | IdentityocStbHostMibModule | and | Licensed under the Apache License, Version 2.0 (the 'License'); you may not use this file except in compliance with the License. You may obtain a copy of the L… | |
| 1.3.6.1.4.1.4491.2.3.1.0 | NodeocStbHostNotifications | |||
| 1.3.6.1.4.1.4491.2.3.1.0.1 | NotificationocStbPanicDumpTrap | current | Notifies host that a panic dump condition has occurred. The headend then may issue a TFTP Get to retrieve the dump or ignore the trap and allow the host ocStbH… | |
| 1.3.6.1.4.1.4491.2.3.1.1 | NodeocStbHostMibObjects | |||
| 1.3.6.1.4.1.4491.2.3.1.1.1 | NodeocStbHostSystem | |||
| 1.3.6.1.4.1.4491.2.3.1.1.1.1 | NodeocStbHostHWIdentifiers | |||
| 1.3.6.1.4.1.4491.2.3.1.1.1.1.1 | ScalarocStbHostSerialNumber | read-only | current | The manufacturer's serial number for this device. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.1.2 | ScalarocStbHostHostID | read-only | current | Allows the manager to retrieve the 40-bit Host ID of the ocStbHost (SNMP apdu TLV #1) in the string format indicated below: M-MMU-UUU-UUU-UUL Where: M-MM is th… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.1.3 | ScalarocStbHostCapabilities | read-only | current | The capabilities indication of the STB device. 'other' means a device which is not described by one of the other enumerations in this list. 'ochd2' means the S… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.1.4 | ScalarocStbHostAvcSupport | read-only | current | The AVC capabilities indication of the STB device. The object has a value of true (1) if AVC decode is supported. Otherwise, the object has a value of false (2… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2 | NodeocStbHostInterfaces | |||
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1 | NodeocStbHostDevInterfaceTypes | |||
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.1 | IdentityocStbHostOther | current | The type identifier used for an interface not defined in this MIB. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.2 | IdentityocStbHostScte55FdcRx | current | The type identifier used for SCTE-55 FDC Receiver (i.e., out-of-band downstream tuner). | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.3 | IdentityocStbHostScte55RdcTx | current | The type identifier used for SCTE-55 RDC Transmitter (i.e., out-of-band upstream transmitter). | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.4 | IdentityocStbHostScte40FatRx | current | The type identifier used for SCTE-40 FAT Receiver (i.e., in-band video tuner). | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.5 | IdentityocStbHostBbVideoIn | current | The type identifier used for baseband video input. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.6 | IdentityocStbHostBbAudioIn | current | The type identifier used for baseband audio input. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.7 | IdentityocStbHostBbVideoOut | current | The type identifier used for baseband video output. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.8 | IdentityocStbHostBbAudioOut | current | The type identifier used for baseband audio output. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.9 | IdentityocStbHostRfOutCh | current | The type identifier used for analog RF output. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.10 | IdentityocStbHostSVideoIn | current | The type identifier used for SVideo input. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.11 | IdentityocStbHostSVideoOut | current | The type identifier used for SVideo output. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.12 | IdentityocStbHostComponentIn | current | The type identifier used for Component input. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.13 | IdentityocStbHostComponentOut | current | The type identifier used for Component output. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.14 | IdentityocStbHostDviIn | current | The type identifier used for DVI input. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.15 | IdentityocStbHostDviOut | current | The type identifier used for DVI output. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.16 | IdentityocStbHostHdmiIn | current | The type identifier used for HDMI input. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.17 | IdentityocStbHostHdmiOut | current | The type identifier used for HDMI output. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.18 | IdentityocStbHostRcaSpdifIn | current | The type identifier used for RCA SPDIF input. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.19 | IdentityocStbHostRcaSpdifOut | current | The type identifier used for RCA SPDIF output. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.20 | IdentityocStbHostToslinkSpdifIn | current | The type identifier used for Toslink SPDIF input. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.21 | IdentityocStbHostToslinkSpdifOut | current | The type identifier used for Toslink SPDIF output. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.22 | IdentityocStbHostDisplayOut | current | The type identifier used for the television screen output. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.23 | IdentityocStbHost1394In | current | The type identifier used for IEEE-1394 input. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.24 | IdentityocStbHost1394Out | current | The type identifier used for IEEE-1394 output. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.25 | IdentityocStbHostDRIInterface | current | The type identifier used for the DRI interface. | |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.2 | TableocStbHostAVInterfaceTable | not-accessible | current | This table contains a list of A/V (Audio/Video) interfaces (video inputs/outputs, tuners, audio inputs/outputs) in the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1 | RowocStbHostAVInterfaceEntry | not-accessible | current | Each entry describes the type and status of the A/V interface on the ocStbHost. The details of A/V interface entries may be defined in table extensions as indi… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1.1 | ColumnocStbHostAVInterfaceIndex | not-accessible | current | Index of the table. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1.2 | ColumnocStbHostAVInterfaceType | read-only | current | An indication of the type of interface. If this value is ocStbHostComponentOut then a corresponding entry exists in the ocStbHostComponentVideoTable. If this v… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1.3 | ColumnocStbHostAVInterfaceDesc | read-only | current | Textual description of the A/V Interface |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1.4 | ColumnocStbHostAVInterfaceStatus | read-only | current | Status of the interface. 'enabled' indicates the A/V interface is active and can be used for the user. 'disabled' indicates the A/V interface is currently not … |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3 | NodeocStbHostIEEE1394Objects | |||
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1 | TableocStbHostIEEE1394Table | not-accessible | current | This table contains attributes associated with the ocStbHost Interfaces of type IEEE 1394. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1 | RowocStbHostIEEE1394Entry | not-accessible | current | An entry exists in this table for each interface of the type IEEE 1394. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.1 | ColumnocStbHostIEEE1394ActiveNodes | read-only | current | This object allows the manager to retrieve the number of nodes connected to the 1394 bus of the ocStbHost. The value '-1' means unknown number of nodes. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.2 | ColumnocStbHostIEEE1394DataXMission | read-only | current | This object allows the manager to retrieve the state of data being transmitted over the 1394 bus. True indicates that data is being transmitted over the 1394 b… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.3 | ColumnocStbHostIEEE1394DTCPStatus | read-only | current | This object allows the manager to retrieve the state of DTCP on the device. True indicates that DTCP is enabled and content is being encrypted of the 1394 link… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.4 | ColumnocStbHostIEEE1394LoopStatus | read-only | current | This object allows the manager to retrieve the state of a Loop present on the 1394 bus. True indicates that a Loop is present on the 1394 bus. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.5 | ColumnocStbHostIEEE1394RootStatus | read-only | current | This object allows the manager to retrieve the state of Root Status on the device. True indicates that the set-top is the Root node on the 1394 bus. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.6 | ColumnocStbHostIEEE1394CycleIsMaster | read-only | current | This object allows the manager to retrieve the state of Cycle Master on the device. True indicates that the set-top is Cycle Master on the 1394 bus. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.7 | ColumnocStbHostIEEE1394IRMStatus | read-only | current | This object allows the manager to retrieve the state of Isochronous Resource Master on the device. True indicates that the set-top is IRM on the 1394 bus. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.8 | ColumnocStbHostIEEE1394AudioMuteStatus | read-only | current | The value 'true' indicates that the audio signal is muted for this Interface. 'false' means the audio is not muted. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.9 | ColumnocStbHostIEEE1394VideoMuteStatus | read-only | current | The value 'true' indicates that the video signal is muted for this Interface. 'false' means the video signal is not muted. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2 | TableocStbHostIEEE1394ConnectedDevicesTable | not-accessible | current | This table contains A/D Source Selection attributes associated to devices connected to the ocStbHost Interfaces of type IEEE 1394. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1 | RowocStbHostIEEE1394ConnectedDevicesEntry | not-accessible | current | An entry exist in this table for each device connected to all Interfaces of the type IEEE 1394. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.1 | ColumnocStbHostIEEE1394ConnectedDevicesIndex | not-accessible | current | The unique identifier of the connected device entry. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.2 | ColumnocStbHostIEEE1394ConnectedDevicesAVInterfaceIndex | read-only | current | This object allows the manager to retrieve the index value associated with the IEEE1394 instance of ocStbHostAVInterfaceIndex to which the device is physically… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.3 | ColumnocStbHostIEEE1394ConnectedDevicesSubUnitType | read-only | current | This object allows the manager to retrieve the Subunit Type associated with the device connected to the ocStbHost's IEEE1394 interface. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.4 | ColumnocStbHostIEEE1394ConnectedDevicesEui64 | read-only | current | This object allows the manager to retrieve the 64-bit Extended Unique Identifier (EUI-64) associated with the device connected to the ocStbHost's IEEE1394 inte… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.5 | ColumnocStbHostIEEE1394ConnectedDevicesADSourceSelectSupport | read-only | current | This object allows the manager to retrieve the status of Analog/Digital Source Selection support associated with the device connected to the ocStbHost's IEEE13… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4 | NodeocStbHostDigitalVideoOutput | |||
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1 | TableocStbHostDVIHDMITable | not-accessible | current | This table allows the manager to retrieve information about the DVI/HDMI port of the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1 | RowocStbHostDVIHDMIEntry | not-accessible | current | An entry exists for each A/V interface of type HDMI or DVI of the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.2 | ColumnocStbHostDVIHDMIOutputType | read-only | current | This object defines the operational mode of the interface, where valid modes are dependent on the physical interface defined. If ocStbHostAVInterfaceIndex is D… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.3 | ColumnocStbHostDVIHDMIConnectionStatus | read-only | current | This object allows the manager to retrieve the state of the DVI/HDMI port on the device. 'true' indicates that a device is connected to the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.4 | ColumnocStbHostDVIHDMIRepeaterStatus | read-only | current | This object allows the manager to retrieve the presence of a repeater connected to the ocStbHost. 'true' indicates that a repeater is connected to the ocStbHos… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.5 | ColumnocStbHostDVIHDMIVideoXmissionStatus | read-only | current | This object allows the manager to retrieve the state of video transmission over the DVI/HDMI port of the ocStbHost. 'true' indicates that video is being transm… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.6 | ColumnocStbHostDVIHDMIHDCPStatus | read-only | current | This object allows the manager to retrieve the state of the digital copy protection protocol in the interface. 'true' indicates that HDCP encryption is enabled. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.7 | ColumnocStbHostDVIHDMIVideoMuteStatus | read-only | current | The value 'true' indicates that the video signal is being muted over the DVI/HDMI link. 'false' means the video signal is not muted. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.8 | ColumnocStbHostDVIHDMIOutputFormat | read-only | current | This object allows the manager to retrieve the video timing format currently being transmitted over the DVI/HDMI link. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.9 | ColumnocStbHostDVIHDMIAspectRatio | read-only | current | This object allows the manager to retrieve the aspect ratio applicable to the video timing format currently being transmitted over the DVI/HDMI link. e.g., 4/3… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.10 | ColumnocStbHostDVIHDMIHostDeviceHDCPStatus | read-only | current | Connected device HDCP status. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.11 | ColumnocStbHostDVIHDMIAudioFormat | read-only | current | This object allows the manager to retrieve the audio format being transmitted over the HDMI link. If this entry corresponds to a DVI interface, this object is … |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.12 | ColumnocStbHostDVIHDMIAudioSampleRate | read-only | current | This object allows the manager to retrieve the audio sample rate being transmitted over the HDMI link. If this entry corresponds to a DVI interface, this objec… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.13 | ColumnocStbHostDVIHDMIAudioChannelCount | read-only | current | This object allows the manager to retrieve the audio channel count being transmitted over the HDMI link. If this entry corresponds to a DVI interface, this obj… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.14 | ColumnocStbHostDVIHDMIAudioMuteStatus | read-only | current | The value 'true' indicates that the audio signal is muted over the DVI/HDMI link. 'false' means the audio is not muted. This object is not instantiated for ent… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.15 | ColumnocStbHostDVIHDMIAudioSampleSize | read-only | current | Non-zero values pertain only to PCM audio formats and indicate the PCM sample size. This object applies only to HDMI outputs. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.16 | ColumnocStbHostDVIHDMIColorSpace | read-only | current | Color space for HDMI outputs only. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.17 | ColumnocStbHostDVIHDMIFrameRate | read-only | current | Frame rates for HDMI outputs as defined in CCIF spec: frameRateCode1 = 23.976 Hz frameRateCode2 = 24.0 Hz frameRateCode3 = 29.97 Hz frameRateCode4 = 30.0 Hz fr… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.18 | ColumnocStbHostDVIHDMIAttachedDeviceType | read-only | current | The HDMI defined types of devices derived defined in the DHMI specification version 1.3a. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.19 | ColumnocStbHostDVIHDMIEdid | read-only | current | EDID blob for debugging. A 0x00 should be returned if an EDID is not available. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.20 | ColumnocStbHostDVIHDMILipSyncDelay | read-only | current | Defines the amount of delay in milliseconds that is being applied to the audio delivered over the HDMI link. A value of zero indicates that either no delay is … |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.21 | ColumnocStbHostDVIHDMICecFeatures | read-only | current | This object lists all of the CEC Features supported by the device. When the bit is set, the feature is supported. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.22 | ColumnocStbHostDVIHDMIFeatures | read-only | current | This object lists all of the HDMI Features supported by the device. When the bit is set, the feature is supported. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.23 | ColumnocStbHostDVIHDMIMaxDeviceCount | read-only | current | Defines the maximum number of downstream devices that this device can support. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.24 | ColumnocStbHostDVIHDMIPreferredVideoFormat | read-only | current | This object allows the manager to retrieve the preferred video format of the sink device. The value is an integer representing the video timing format expresse… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.25 | ColumnocStbHostDVIHDMIEdidVersion | read-only | current | EDID version reported in bytes 18 and 19 of the EDID itself. It is in version.release format. A value of 0.0 should be returned if an EDID is not available. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.26 | ColumnocStbHostDVIHDMI3DCompatibilityControl | read-write | current | Defines what action to take for a display device that has not reported support for the received S3D content. passthru3D(1) requires the content to be passed on… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.27 | ColumnocStbHostDVIHDMI3DCompatibilityMsgDisplay | read-write | current | True(1) requires the STB to generate and transmit a warning message when the following occurs: 1) the STB receives S3D content and 2) the display device has no… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.2 | TableocStbHostDVIHDMIAvailableVideoFormatTable | not-accessible | current | This table allows the manager to retrieve a list of all of the video timing formats reported by the sink device as per the device's EDID. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.2.1 | RowocStbHostDVIHDMIAvailableVideoFormatEntry | not-accessible | current | Entry in the ocStbHostDVIHDMIAvailableVideoFormatTable. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.2.1.1 | ColumnocStbHostDVIHDMIAvailableVideoFormatIndex | not-accessible | current | Index in the ocStbHostDVIHDMIAvailableVideoFormatTable. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.2.1.2 | ColumnocStbHostDVIHDMIAvailableVideoFormat | read-only | current | This object allows the manager to retrieve the available video formats of the sink device. The value is an integer representing the video timing format express… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.2.1.3 | ColumnocStbHostDVIHDMISupported3DStructures | read-only | current | This object reports the 3D structures supported by the sink as reported in the EDID VSDB. The supported structures are specified in [HDMI] Appendix H. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.2.1.4 | ColumnocStbHostDVIHDMIActive3DStructure | read-only | current | This object allows the manager to retrieve the contents of the HDMI Vendor Specific InfoFrame currently being transmitted by the source. The video signal corre… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.5 | NodeocStbHostAnalogOutput | |||
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1 | TableocStbHostComponentVideoTable | not-accessible | current | This table allows the manager to retrieve information about a Component Video interface of the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1 | RowocStbHostComponentVideoEntry | not-accessible | current | An entry for each interface of type 'ocStbHostComponentOut'. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1.1 | ColumnocStbHostComponentVideoConstrainedStatus | read-only | current | This object allows the manager to retrieve the state of Constrained Video Image on the port. True indicates that video is being constrained over the component … |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1.2 | ColumnocStbHostComponentOutputFormat | read-only | current | This object allows the manager to retrieve the video format currently being transmitted over the Component Video output port. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1.3 | ColumnocStbHostComponentAspectRatio | read-only | current | This object allows the manager to retrieve the video aspect ratio currently being transmitted over the Component Video output port. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1.4 | ColumnocStbHostComponentVideoMuteStatus | read-only | current | The value 'true' indicates that the video signal is muted for this Interface. 'false' means the video signal is not muted. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2 | TableocStbHostRFChannelOutTable | not-accessible | current | This table allows the manager to retrieve information about an RF channel output interface of the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2.1 | RowocStbHostRFChannelOutEntry | not-accessible | current | An entry for each interface of type 'ocStbHostRFOutCh'. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2.1.2 | ColumnocStbHostRFChannelOut | read-only | current | Indicates the RF channel out value. Typical values are 3 or 4 for Channels 3 and 4, respectively. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2.1.3 | ColumnocStbHostRFChannelOutAudioMuteStatus | read-only | current | The value 'true' indicates that the audio signal is muted for this Interface. 'false' means the audio is not muted. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2.1.4 | ColumnocStbHostRFChannelOutVideoMuteStatus | read-only | current | The value 'true' indicates that the video signal is muted for this Interface. 'false' means the video signal is not muted. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.6 | TableocStbHostSPDIfTable | not-accessible | current | This table allows the manager to retrieve information about the SONY, Philips Digital (SPD) Interface of the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.6.1 | RowocStbHostSPDIfEntry | not-accessible | current | An entry exists for each Audio interface of type SPD. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.6.1.1 | ColumnocStbHostSPDIfAudioFormat | read-only | current | The format of the Audio stream transmitted over this interface. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.6.1.2 | ColumnocStbHostSPDIfAudioMuteStatus | read-only | current | The value 'true' indicates that the audio signal is muted over the SPDIF link. 'false' means the audio is not muted. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7 | NodeocStbHostServiceProgramInfo | |||
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1 | TableocStbHostInBandTunerTable | not-accessible | current | This Object Table allows the manager to retrieve information regarding the In-Band tuner(s) in the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1 | RowocStbHostInBandTunerEntry | not-accessible | current | This entry contains information regarding a tuner of type ocStbHostScte40FatRx in the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.1 | ColumnocStbHostInBandTunerModulationMode | read-only | current | The In-band tuner modulation mode. Modulation modes are as follows: other - IB is configured in a manner not described by any other listed mode. Analog - IB is… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.2 | ColumnocStbHostInBandTunerFrequency | read-only | current | This object allows the manager to retrieve the center frequency of the currently tuned channel in Hz. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.3 | ColumnocStbHostInBandTunerInterleaver | read-only | current | The in-band interface interleaver value. set to '3' current operational mode 'taps64Increment2' set to '4' current operational mode 'taps128Increment1' set to … |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.4 | ColumnocStbHostInBandTunerPower | read-only | current | The received power level of this in-band interface. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.5 | ColumnocStbHostInBandTunerAGCValue | read-only | current | This object allows the manager to retrieve the In-band channel AGC value (%). When an In-band Carrier Lock is indicated, a value of 0 (zero) indicates that the… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.6 | ColumnocStbHostInBandTunerSNRValue | read-only | current | This object allows the manager to retrieve the In-band channel SNR value (1/10 dB). When an In-band Carrier Lock is indicated, a value of 0 (zero) indicates th… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.7 | ColumnocStbHostInBandTunerUnerroreds | read-only | current | Codewords received on this channel without error. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at othe… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.8 | ColumnocStbHostInBandTunerCorrecteds | read-only | current | Codewords received on this in-band channel with correctable errors. Discontinuities in the value of this counter can occur at reinitialization of the managed s… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.9 | ColumnocStbHostInBandTunerUncorrectables | read-only | current | Codewords received on this in-band channel with uncorrectable errors. Discontinuities in the value of this counter can occur at reinitialization of the managed… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.10 | ColumnocStbHostInBandTunerCarrierLockLost | read-only | current | The number of times the ocStbHost has detected carrier Lock is lost. Discontinuities in the value of this counter can occur at reinitialization of the managed … |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.11 | ColumnocStbHostInBandTunerPCRErrors | read-only | current | The number of times the Program Clock Reference (PCR) detected Synchronization errors; e.g., wrong PCR from multiplexer, excessive CPR Jitter, etc. Discontinui… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.12 | ColumnocStbHostInBandTunerPTSErrors | read-only | current | The number of Presentation TimeStamp (PTS) packets that encounter sequencing errors. Discontinuities in the value of this counter can occur at reinitialization… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.13 | ColumnocStbHostInBandTunerState | read-only | current | The In-band tuner current state. Modulation modes are as follows: ready - indicates that the tuner is in idle mode (not currently in use). waitingSync - indica… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.14 | ColumnocStbHostInBandTunerBER | read-only | current | The average Bit Error Rate range since last tune to a digital channel. This value is determined by dividing the number of erroneous bits by the total number of… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.15 | ColumnocStbHostInBandTunerSecsSinceLock | read-only | current | The amount of time, in seconds, since the last tuner lock on a valid data signal. Each time the tuner locks the ocStbHostInBandTunerUnerroreds, ocStbHostInBand… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.16 | ColumnocStbHostInBandTunerEqGain | read-only | current | The value of the equalizer gain on the QAM data channel. A value of 0 (zero) indicates that the ocStbHost does not compute the value. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.17 | ColumnocStbHostInBandTunerMainTapCoeff | read-only | current | The normalized main tap coefficient used for calibrating data path delay or frequency response. A value of 0 (zero) indicates that the ocStbHost does not compu… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.18 | ColumnocStbHostInBandTunerTotalTuneCount | read-only | current | The number of times an attempt has been made to change the tuned frequency. This includes both successful and unsuccessful attempts. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.19 | ColumnocStbHostInBandTunerTuneFailureCount | read-only | current | The number of times an attempt to change the tuned frequency has resulted in a failure to acquire a signal (either analog or digital). |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.20 | ColumnocStbHostInBandTunerTuneFailFreq | read-only | current | The most recent frequency at which an attempt to tune resulted in an increment of ocStbHostInBandTunerTuneFailureCount. If no tune attempt has failed since ini… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.21 | ColumnocStbHostInBandTunerBandwidth | read-only | current | The In-band tuner bandwidth. Tuner bandwidth choices are as follows: other - Tuning range is not described by any other listed range. mHz864 - Tuning range is … |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2 | TableocStbHostProgramStatusTable | not-accessible | current | A table of current program content being forwarded by the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1 | RowocStbHostProgramStatusEntry | not-accessible | current | There is an entry in this table for each active program content path. This means that the same program content source and/or destination can be associated to m… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.1 | ColumnocStbHostProgramIndex | not-accessible | current | Index for Program Status Entry Table. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.2 | ColumnocStbHostProgramAVSource | read-only | current | Defines the source interface associated with this entry. Example sources are interfaces listed in the ifTable, interfaces listed in ocStbAVInterfaceTable, or a… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.3 | ColumnocStbHostProgramAVDestination | read-only | current | Defines the destination interface associated with this entry. Example destinations are interfaces listed in the ifTable, interfaces listed in ocStbAVInterfaceT… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.4 | ColumnocStbHostProgramContentSource | read-only | current | A pointer to the first visible object structure that defines the type of content associated to the A/V source interface. If MPEG-2 video is present,, this obje… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.5 | ColumnocStbHostProgramContentDestination | read-only | current | A pointer to the first visible object structure that defines the type of content associated to the A/V destination interface. If MPEG-2 video is present, this … |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3 | TableocStbHostMpeg2ContentTable | not-accessible | current | Contains information associated to an MPEG-2 Program carried by an MPEG-2 transport stream. Entries in this table can be associated to interfaces receiving or … |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1 | RowocStbHostMpeg2ContentEntry | not-accessible | current | The conceptual row for this table. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.1 | ColumnocStbHostMpeg2ContentIndex | not-accessible | current | The unique identifier for the Mpeg2 Content entries in this table. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.2 | ColumnocStbHostMpeg2ContentProgramNumber | read-only | current | The program Number associated with active content within the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.3 | ColumnocStbHostMpeg2ContentTransportStreamID | read-only | current | Defines the transport stream ID associated with the program number. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.4 | ColumnocStbHostMpeg2ContentTotalStreams | read-only | current | Defines the total number of elementary streams associated with the program number. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.5 | ColumnocStbHostMpeg2ContentSelectedVideoPID | read-only | current | This object allows the manager to retrieve the PID associated to the selected video stream. The value '-1' indicates that no video stream is being selected or … |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.6 | ColumnocStbHostMpeg2ContentSelectedAudioPID | read-only | current | The selected audio PID. The value '-1' indicates no audio stream identified. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.7 | ColumnocStbHostMpeg2ContentOtherAudioPIDs | read-only | current | Then value 'true' indicates the MPEG-2 program has more than one audio PID. 'false' indicates the MPEG-2 program has only one audio PID. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.8 | ColumnocStbHostMpeg2ContentCCIValue | read-only | current | This value allows the manager to retrieve the encryption Mode Indication (EMI) Bits of the Copy Control Information (CCI) byte associated with the service. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.9 | ColumnocStbHostMpeg2ContentAPSValue | read-only | current | This value allows the manager to retrieve the Analog Protection System (APS) bits of the Copy Control Information (CCI) byte associated with the service. 'type… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.10 | ColumnocStbHostMpeg2ContentCITStatus | read-only | current | This value allows the manager to retrieve the state of the Constrained Image Trigger(CIT). 'true' indicates image constraint required. 'false' indicates image … |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.11 | ColumnocStbHostMpeg2ContentBroadcastFlagStatus | read-only | current | This value allows the manager to retrieve the state of Broadcast Flag in the source interface. 'true' indicates Broadcast Flag present. 'false' indicates Broad… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.12 | ColumnocStbHostMpeg2ContentEPNStatus | read-only | current | This object allows the manager to retrieve the EPN status of the MPEG stream. 'true' indicates that EPN is asserted. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.13 | ColumnocStbHostMpeg2ContentPCRPID | read-only | current | This object allows the manager to retrieve the PCR PID associated to the selected video stream. The value '-1' indicates that no video stream is being selected… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.14 | ColumnocStbHostMpeg2ContentPCRLockStatus | read-only | current | The status of the Program Clock Reference lock. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.15 | ColumnocStbHostMpeg2ContentDecoderPTS | read-only | current | The value of the MPEG decoder Presentation TimeStamp (PTS). The LSB should be dropped to reduce the PTS length to 32 bits. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.16 | ColumnocStbHostMpeg2ContentDiscontinuities | read-only | current | The sum of the audio and video PID discontinuities detected on the MPEG stream. The values are based on the time since PCR lock on the current PIDs or stream b… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.17 | ColumnocStbHostMpeg2ContentPktErrors | read-only | current | The number of errors detected in the MPEG stream. The Values are based on the time since PCR lock on the Current PIDs or stream being reported |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.18 | ColumnocStbHostMpeg2ContentPipelineErrors | read-only | current | The number of errors reported exclusively by the MPEG decoder. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.19 | ColumnocStbHostMpeg2ContentDecoderRestarts | read-only | current | The number of times the software driver restarted the MPEG decoding process. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.20 | ColumnocStbHostMpeg2ContainerFormat | read-only | current | The format of the transport carrying the MPEG2 video stream. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.4 | TableocStbHostAnalogVideoTable | not-accessible | current | Contains information about the Analog Video signal. Entries in this table can be associated to interfaces receiving or forwarding analog content. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.4.1 | RowocStbHostAnalogVideoEntry | not-accessible | current | The conceptual row for this table. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.4.1.1 | ColumnocStbHostAnalogVideoProtectionStatus | read-only | current | The analog protection system (APS) of this Video content entry. The possible values are: 'copyProtectionOff' means the Macrovision Analog protection is off 'sp… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5 | TableocStbHostMpeg4ContentTable | not-accessible | current | Contains information associated to an MPEG-4 Program carried by an MPEG-2 or MPEG-4 transport stream. Entries in this table can be associated to interfaces rec… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1 | RowocStbHostMpeg4ContentEntry | not-accessible | current | The conceptual row for this table. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.1 | ColumnocStbHostMpeg4ContentIndex | not-accessible | current | The unique identifier for the MPEG-4 Content entries in this table. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.2 | ColumnocStbHostMpeg4ContentProgramNumber | read-only | current | The program Number associated with active content within the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.3 | ColumnocStbHostMpeg4ContentTransportStreamID | read-only | current | Defines the transport stream ID associated with the program number. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.4 | ColumnocStbHostMpeg4ContentTotalStreams | read-only | current | Defines the total number of elementary streams associated with the program number. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.5 | ColumnocStbHostMpeg4ContentSelectedVideoPID | read-only | current | This object allows the manager to retrieve the PID associated to the selected video stream. The value '-1' indicates that no video stream is being selected or … |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.6 | ColumnocStbHostMpeg4ContentSelectedAudioPID | read-only | current | The selected audio PID. The value '-1' indicates no audio stream identified. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.7 | ColumnocStbHostMpeg4ContentOtherAudioPIDs | read-only | current | Then value 'true' indicates the MPEG-2 program has more than one audio PID. 'false' indicates the MPEG-4 program has only one audio PID. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.8 | ColumnocStbHostMpeg4ContentCCIValue | read-only | current | This value allows the manager to retrieve the Encryption Mode Indication (EMI) Bits of the Copy Control Information (CCI) byte associated with the service. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.9 | ColumnocStbHostMpeg4ContentAPSValue | read-only | current | This value allows the manager to retrieve the Analog Protection System (APS) bits of the Copy Control Information (CCI) byte associated with the service. 'type… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.10 | ColumnocStbHostMpeg4ContentCITStatus | read-only | current | This value allows the manager to retrieve the state of the Constrained Image Trigger(CIT). 'true' indicates image constraint required. 'false' indicates image … |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.11 | ColumnocStbHostMpeg4ContentBroadcastFlagStatus | read-only | current | This value allows the manager to retrieve the state of Broadcast Flag in the source interface. 'true' indicates Broadcast Flag present. 'false' indicates Broad… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.12 | ColumnocStbHostMpeg4ContentEPNStatus | read-only | current | This object allows the manager to retrieve the EPN status of the MPEG stream. 'true' indicates that EPN is asserted. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.13 | ColumnocStbHostMpeg4ContentPCRPID | read-only | current | This object allows the manager to retrieve the PCR PID associated to the selected video stream. The value '-1' indicates that no video stream is being selected… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.14 | ColumnocStbHostMpeg4ContentPCRLockStatus | read-only | current | The status of the Program Clock Reference lock. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.15 | ColumnocStbHostMpeg4ContentDecoderPTS | read-only | current | The value of the MPEG decoder Presentation TimeStamp (PTS). The LSB should be dropped to reduce the PTS length to 32 bits. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.16 | ColumnocStbHostMpeg4ContentDiscontinuities | read-only | current | The sum of the audio and video PID discontinuities detected on the MPEG stream. The values are based on the time since PCR lock on the current PIDs or stream b… |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.17 | ColumnocStbHostMpeg4ContentPktErrors | read-only | current | The number of errors detected in the MPEG stream. The Values are based on the time since PCR lock on the Current PIDs or stream being reported. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.18 | ColumnocStbHostMpeg4ContentPipelineErrors | read-only | current | The number of errors reported exclusively by the MPEG decoder. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.19 | ColumnocStbHostMpeg4ContentDecoderRestarts | read-only | current | The number of times the software driver restarted the MPEG decoding process. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.20 | ColumnocStbHostMpeg4ContainerFormat | read-only | current | The format of the container carrying the MPEG4 video stream. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.6 | TableocStbHostVc1ContentTable | not-accessible | current | Contains information associated to a VC-1 Program carried by an MPEG-2 or MPEG-4 transport stream. This table will be expanded as VC-1 support is added to the … |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.6.1 | RowocStbHostVc1ContentEntry | not-accessible | current | The conceptual row for this table. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.6.1.1 | ColumnocStbHostVc1ContentIndex | not-accessible | current | The unique identifier for the Vc1 Content entries in this table. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.6.1.2 | ColumnocStbHostVc1ContentProgramNumber | read-only | current | The program Number associated with active content within the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.6.1.20 | ColumnocStbHostVc1ContainerFormat | read-only | current | The format of the transport carrying the VC1 video stream. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.8 | NodeocStbHostQpskObjects | |||
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.1 | ScalarocStbHostQpskFDCFreq | read-only | current | The frequency to which the QPSK receiver is currently tuned. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.2 | ScalarocStbHostQpskRDCFreq | read-only | current | The frequency to which the QPSK transmitter is currently tuned. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.3 | ScalarocStbHostQpskFDCBer | read-only | current | The rate at which bit errors are occurring based on the number of data errors since the frequency has been locked. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.4 | ScalarocStbHostQpskFDCStatus | read-only | current | Forward data channel lock status. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.5 | ScalarocStbHostQpskFDCBytesRead | read-only | current | The number of bytes successfully read since the frequency was locked. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.6 | ScalarocStbHostQpskFDCPower | read-only | current | The power level, in dBmV, of the forward data channel. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.7 | ScalarocStbHostQpskFDCLockedTime | read-only | current | The number of seconds that the current FDC frequency has been locked. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.8 | ScalarocStbHostQpskFDCSNR | read-only | current | This object allows the manager to retrieve the FDC SNR value (1/10 dB). |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.9 | ScalarocStbHostQpskAGC | read-only | current | This object allows the manager to retrieve the OOB channel Automatic Gain Control value (%). |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.10 | ScalarocStbHostQpskRDCPower | read-only | current | The power output level, in dBmV, of the QPSK transmitter. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.11 | ScalarocStbHostQpskRDCDataRate | read-only | current | The data rate (in kbps) of the RDC. |
| 1.3.6.1.4.1.4491.2.3.1.1.1.3 | NodeocStbHostEasObjects | |||
| 1.3.6.1.4.1.4491.2.3.1.1.1.3.1 | NodeocStbHostEasCodes | |||
| 1.3.6.1.4.1.4491.2.3.1.1.1.3.1.1 | ScalarocStbEasMessageStateCode | read-only | current | This object allows the manager to retrieve the EAS State Code utilized by the STB. A value of 0 indicates that the code is not defined, thus the eSTB does not … |
| 1.3.6.1.4.1.4491.2.3.1.1.1.3.1.2 | ScalarocStbEasMessageCountyCode | read-only | current | This object allows the manager to retrieve the EAS County Code utilized by the STB. A value of 0 indicates that the code is not defined, thus the eSTB ignores … |
| 1.3.6.1.4.1.4491.2.3.1.1.1.3.1.3 | ScalarocStbEasMessageCountySubdivisionCode | read-only | current | This object allows the manager to retrieve the EAS County Sub Code utilized by the STB. A value of 0 indicates that the code is not defined, thus the eSTB igno… |
| 1.3.6.1.4.1.4491.2.3.1.1.2 | NodeocStbHostSecuritySubSystem | |||
| 1.3.6.1.4.1.4491.2.3.1.1.2.2 | ScalarocStbHostSecurityIdentifier | read-only | deprecated | The security identifier of the ocStbHost. This object represents the 40-bit Host_ID obtained from the Host x509 certificate. |
| 1.3.6.1.4.1.4491.2.3.1.1.2.3 | ScalarocStbHostCASystemIdentifier | read-only | current | Conditional access system identifier defined by DVB and MPEG. This object represents the 16-bit CA_system_id obtained from the ca_info_reply apdu. Only the fir… |
| 1.3.6.1.4.1.4491.2.3.1.1.2.4 | ScalarocStbHostCAType | read-only | current | The Conditional Access (CA) supported by the host device. 'other' means a CA which is not described by one of the other enumerations in this list. 'embedded' m… |
| 1.3.6.1.4.1.4491.2.3.1.1.3 | NodeocStbHostSoftware | |||
| 1.3.6.1.4.1.4491.2.3.1.1.3.1 | NodeocStbHostDeviceSoftwareBase | |||
| 1.3.6.1.4.1.4491.2.3.1.1.3.1.1 | ScalarocStbHostSoftwareFirmwareVersion | read-only | current | The platform code software version currently operating in this device. This object should be in the syntax used by the individual vendor to identify software v… |
| 1.3.6.1.4.1.4491.2.3.1.1.3.1.2 | ScalarocStbHostSoftwareOCAPVersion | read-only | current | This object returns a string indicating the latest version of the OCAP profile supported by this device, e.g., '1.0'. |
| 1.3.6.1.4.1.4491.2.3.1.1.3.1.3 | ScalarocStbHostSoftwareFirmwareReleaseDate | read-only | current | This object returns release date of this entire firmware image (the stack OS). The local time fields should be set to zero and the timezone information omitted. |
| 1.3.6.1.4.1.4491.2.3.1.1.3.1.4 | ScalarocStbHostSoftwareBootloaderVersion | read-only | current | The platform code bootloader version currently operating in this device. The bootloader is responsible for verifying and starting the platform code software. T… |
| 1.3.6.1.4.1.4491.2.3.1.1.3.2 | NodeocStbHostFirmwareDownloadStatus | |||
| 1.3.6.1.4.1.4491.2.3.1.1.3.2.1 | ScalarocStbHostFirmwareImageStatus | read-only | current | This object details the image status recently downloaded 'imageAuthorized' means the image is valid. 'imageCorrupted' means the image is invalid. 'imageCertFai… |
| 1.3.6.1.4.1.4491.2.3.1.1.3.2.2 | ScalarocStbHostFirmwareCodeDownloadStatus | read-only | current | This object details the download status of the target image. 'downloadingComplete' means the image download was successful. 'downloadingFailed' means the image… |
| 1.3.6.1.4.1.4491.2.3.1.1.3.2.3 | ScalarocStbHostFirmwareCodeObjectName | read-only | current | The file name of the software image to be loaded into this device. This object value may optionally contain server and path information about the file name whe… |
| 1.3.6.1.4.1.4491.2.3.1.1.3.2.4 | ScalarocStbHostFirmwareDownloadFailedStatus | read-only | current | This object details the firmware download failed status codes. cdlError1, No Failure cdlError2, Improper code file controls - CVC subject organizationName for … |
| 1.3.6.1.4.1.4491.2.3.1.1.3.2.5 | ScalarocStbHostFirmwareDownloadFailedCount | read-only | current | This object details the number of times the product attempted to download the firmware object defined by ocStbHostFirmwareCodeObjectName. The value is reset wh… |
| 1.3.6.1.4.1.4491.2.3.1.1.3.2.6 | ScalarocStbHostFirmwareDownloadGroupId | read-write | current | This object specifies the Group Identifier. This is persistent. The host may initiate a download if the group identifier in the Common Download code version ta… |
| 1.3.6.1.4.1.4491.2.3.1.1.3.3 | NodeocStbHostSoftwareApplicationInfo | |||
| 1.3.6.1.4.1.4491.2.3.1.1.3.3.1 | TableocStbHostSoftwareApplicationInfoTable | not-accessible | current | This table allows the manager to display and retrieve self-diagnostic software information of all available applications. |
| 1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1 | RowocStbHostSoftwareApplicationInfoEntry | not-accessible | current | An entry exists for each available application. |
| 1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.1 | ColumnocStbHostSoftwareAppNameString | read-only | current | The application's name string. |
| 1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.2 | ColumnocStbHostSoftwareAppVersionNumber | read-only | current | The application's version number. |
| 1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.3 | ColumnocStbHostSoftwareStatus | read-only | current | The software status of the application. |
| 1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.4 | ColumnocStbHostSoftwareApplicationInfoIndex | not-accessible | current | Table Index added in this position (4) because it replaced an external index. |
| 1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.5 | ColumnocStbHostSoftwareOrganizationId | read-only | current | Organization ID captured in the XAIT or AIT. |
| 1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.6 | ColumnocStbHostSoftwareApplicationId | read-only | current | This 16 bit field uniquely identifies the application function as assigned by the responsible/owning organization identified in ocStbHostSoftwareOrganizationId. |
| 1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.7 | ColumnocStbHostSoftwareApplicationSigStatus | read-only | deprecated | This field has been replaced by the leaf objects ocStbHostSoftwareApplicationInfoSigLastReceivedTime and ocStbHostSoftwareApplicationInfoSigLastReadStatus. |
| 1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.8 | ColumnocStbHostSoftwareApplicationPriority | read-only | current | This field represents the priority of the application as signaled in the AIT or XAIT. In those tables the value is 8 bits unsigned. The least significant 8 bit… |
| 1.3.6.1.4.1.4491.2.3.1.1.3.3.2 | ScalarocStbHostSoftwareApplicationInfoSigLastReceivedTime | read-only | current | Indicates the last time an XAIT was received from the network that was not the same version as already in-use. If the host device has not received an XAIT, the… |
| 1.3.6.1.4.1.4491.2.3.1.1.3.3.3 | ScalarocStbHostSoftwareApplicationInfoSigLastReadStatus | read-only | current | Indicates the status of the last attempted read of the XAIT from the network that was not the same version as already in use except as noted below. Reports unk… |
| 1.3.6.1.4.1.4491.2.3.1.1.3.3.4 | ScalarocStbHostSoftwareApplicationInfoSigLastNetworkVersionRead | read-only | current | The version number of the XAIT that was last read successfully from the network, but not necessarily accepted by the monitor app. (LastReadStatus of okay or ok… |
| 1.3.6.1.4.1.4491.2.3.1.1.3.3.5 | ScalarocStbHostSoftwareApplicationInfoSigVersionInUse | read-only | current | The version number of the XAIT that is in use, which may have been read from the network or from persistent storage. The version within the XAIT is a 5-bit uns… |
| 1.3.6.1.4.1.4491.2.3.1.1.4 | NodeocStbHostStatus | |||
| 1.3.6.1.4.1.4491.2.3.1.1.4.1 | NodeocStbHostPower | |||
| 1.3.6.1.4.1.4491.2.3.1.1.4.1.1 | ScalarocStbHostPowerStatus | read-only | current | Indicates the current power status of the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.1.2 | ScalarocStbHostAcOutletStatus | read-only | current | Indicates the AC accessory power outlet status of the ocStbHost. 'unSwitched' Indicates AC accessory power outlet is present and provides power as long as the … |
| 1.3.6.1.4.1.4491.2.3.1.1.4.2 | NodeocStbHostUserSettings | |||
| 1.3.6.1.4.1.4491.2.3.1.1.4.2.1 | ScalarocStbHostUserSettingsPreferedLanguage | read-only | current | The preferred language of the audio streams indicated as the 3-octet code specified in ISO 639-2. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3 | NodeocStbHostSystemObjects | |||
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.1 | TableocStbHostSystemTempTable | not-accessible | current | This table contains the temperature sensors of the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1 | RowocStbHostSystemTempEntry | not-accessible | current | Conceptual row of a temperature sensor device associated with a Host Resource device (e.g. DVR) of the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.1 | ColumnocStbHostSystemTempIndex | not-accessible | current | The identifier of the temperature sensor for the corresponding hrDeviceIdx. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.2 | ColumnocStbHostSystemTempDescr | read-only | current | The text containing information about the temperature sensor. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.3 | ColumnocStbHostSystemTempValue | read-only | current | The temperature measured by the sensor. If the temperature sensor does not report a value, this object indicates a value of 0. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.4 | ColumnocStbHostSystemTempLastUpdate | read-only | current | The value of sysUpTime of the last time this value was measured by the ocStbHost. A value 0 means the temperature value is invalid. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.5 | ColumnocStbHostSystemTempMaxValue | read-only | current | The maximum temperature measured by the sensor. If the temperature sensor does not report a value, this object indicates a value of 0. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.2 | TableocStbHostSystemHomeNetworkTable | not-accessible | deprecated | This table contains info about Home Network Clients connected to the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1 | RowocStbHostSystemHomeNetworkEntry | not-accessible | deprecated | Conceptual row of a Home Network device ocStbHost support/status. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.1 | ColumnocStbHostSystemHomeNetworkIndex | not-accessible | deprecated | The identifier of the Home network Client connected to the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.2 | ColumnocStbHostSystemHomeNetworkMaxClients | read-only | deprecated | Maximum number of clients the Host can support. NOTE: If the Host does not support home network clients, then it SHALL report 0x00. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.3 | ColumnocStbHostSystemHomeNetworkHostDRMStatus | read-only | deprecated | The ocStbHost support for Digital Right Management (DRM). |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.4 | ColumnocStbHostSystemHomeNetworkConnectedClients | read-only | deprecated | The number of Home Network Clients currently connected to the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.5 | ColumnocStbHostSystemHomeNetworkClientMacAddress | read-only | deprecated | The MAC address of Home Network Client. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.6 | ColumnocStbHostSystemHomeNetworkClientIpAddress | read-only | deprecated | The Ip address of Home Network Client. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.7 | ColumnocStbHostSystemHomeNetworkClientDRMStatus | read-only | deprecated | The Home Network Clients support for Digital Rights Management (DRM). |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.3 | TableocStbHostSystemMemoryReportTable | not-accessible | current | This table contains the Id of each memory type reported by the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.3.1 | RowocStbHostSystemMemoryReportEntry | not-accessible | current | Conceptual row of a memory type reported by the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.3.1.1 | ColumnocStbHostSystemMemoryReportIndex | not-accessible | current | The identifier of the memory type. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.3.1.2 | ColumnocStbHostSystemMemoryReportMemoryType | read-only | current | Designates the type of memory that is being reported. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.3.1.3 | ColumnocStbHostSystemMemoryReportMemorySize | read-only | current | Designates the physical size of the reported memory type. The units are kilobytes, defined to be 1,024 bytes. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.4 | TableocStbHostSystemDriveInfoTable | not-accessible | current | This table contains information about each storage device that is not an onboard storage such as DRAM. This table is optional unless a solid state drive is pre… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.4.1 | RowocStbHostSystemDriveInfoEntry | not-accessible | current | Conceptual row of a drive info reported by the ocStbHost. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.4.1.1 | ColumnocStbHostSystemDriveInfoIndex | read-only | current | An index that is unique for each drive info entry. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.4.1.2 | ColumnocStbHostSystemDriveInfoVendorId | read-only | current | A string representing the drive vendor identifier. If a vendor identifier cannot be read from the drive then the value of 'unknown' SHALL be used for this valu… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.4.1.3 | ColumnocStbHostSystemDriveInfoProductId | read-only | current | A string representing the drive product identifier. If a Product identifier cannot be read from the drive, then the value of 'unknown' SHALL be used for this v… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.4.1.4 | ColumnocStbHostSystemDriveInfoSerialNumber | read-only | current | A string representing the serial number. If a serial number cannot be read from the drive, then the value of 'unknown' SHALL be used for this value. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.4.1.5 | ColumnocStbHostSystemDriveInfoInterfaceType | read-only | current | Designates the type of drive interface. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.5 | NodeocStbHostSystemLogging | |||
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.5.1 | ScalarocStbHostSystemLoggingControlReset | read-write | current | Setting this object to resetLog(1) empties the logging table. Setting this object to pauseLog(2) causes the Host to stop writing events to the logging table. S… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.5.2 | ScalarocStbHostSystemLoggingSize | read-write | current | Setting this object modifies the size of the system logging table. When set to zero, all entries are removed and new entries are not allowed to be added. When … |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.5.3 | ScalarocStbHostSystemLoggingLevelControl | read-write | current | The current logging priority level for system messages. Setting a level sets all levels from the level specified to the highest severity level except for �OF… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.5.4 | ScalarocStbHostSystemloggingGroupControl | read-write | current | The system 'group' or 'groups' to be logged. If all(1) is set, then other bits are ignored. If set to 'none(0)', messages that do not include a 'group' are can… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.5.5 | TableocStbHostSystemLoggingEventTable | not-accessible | current | This table is a cyclic table of events. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.5.5.1 | RowocStbHostSystemLoggingEventEntry | not-accessible | current | A logging event entry. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.5.5.1.1 | ColumnocStbHostSystemLoggingEventIndex | not-accessible | current | Provides relative ordering of the objects in the event log. This object will always increase except when (a) the log is reset via ocStbHostSystemLoggingEventCo… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.5.5.1.2 | ColumnocStbHostSystemLoggingEventTimeStamp | read-only | current | The time stamp of this event logging entry. The timestamp is established when the event occurs. The value is the number of milli-seconds from Jan 1 1970 conver… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.3.5.5.1.3 | ColumnocStbHostSystemLoggingEventMessage | read-only | current | The event message. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4 | NodeocStbCardInfo | |||
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.1 | ScalarocStbHostCardMacAddress | read-only | current | The Mac Address associated with the Card. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.2 | ScalarocStbHostCardIpAddressType | read-only | current | The network address Type of ocStbHostCardIpAddress. If the Host does not have the Card's IP address (e.g., the Card has not opened an IP Unicast Flow, which wo… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.3 | ScalarocStbHostCardIpAddress | read-only | current | The network address of the Card. If the Host does not have the Card's IP address (e.g., the Card has not opened an IP Unicast Flow, which would require the Hos… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.5 | NodeocStbHostCCMMI | |||
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1 | NodeocStbHostCCApplications | |||
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1 | TableocStbHostCCAppInfoTable | not-accessible | current | This table allows the manager to retrieve the HTML pages for Card applications retrieved by the Host using the Application Info resource. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1 | RowocStbHostCCAppInfoEntry | not-accessible | current | The conceptual row for this table. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.1 | ColumnocStbHostCCAppInfoIndex | read-only | current | This object was the index for this table in a previous version of the MIB. Currently used only as a placeholder to avoid changing OID values. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.2 | ColumnocStbHostCCApplicationType | read-only | current | Index for this table. Contains the application_type field in the application_info_cnf() APDU. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.3 | ColumnocStbHostCCApplicationName | read-only | current | Contains the application name. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.4 | ColumnocStbHostCCApplicationVersion | read-only | current | Contains the application version. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.5 | ColumnocStbHostCCAppInfoPage | read-only | current | All HTML data for this application. If a 'page' as reported from the Card contains links, the links shall be traversed, and all HTML from each page traversed s… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.6 | NodeocStbHostSnmpProxyInfo | |||
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.6.1 | ScalarocStbHostCardMfgId | read-only | current | The two-byte manufacturer identifier acquired from the CableCard. The high order byte defines the manufacturer as follows. 00xx = Motorola 01xx = Cisco (Scient… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.6.2 | ScalarocStbHostCardVersion | read-only | current | The version of the CableCard. This can be used with manufacturer and root OID to enable SNMP access to proprietary diagnostic information. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.6.3 | ScalarocStbHostCardRootOid | read-only | current | An ASN.1 encoding of the root OID of the CableCARD MIB defined in the CC Manufacturers private MIB name space. This OID will be compared against each object id… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.6.4 | ScalarocStbHostCardSerialNumber | read-only | current | Serial Number of CableCARD. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.6.5 | ScalarocStbHostCardSnmpAccessControl | read-write | current | This object allows the manager to control access to the Card's MIB via networked devices (e.g., get/set by network attached managers). It has no impact on loca… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.7 | ScalarocStbHostCardId | read-only | current | Allows the manager to retrieve the 40 least-significant Bits of the CableCARD ID in the string format indicated below: M-MMU-UUU-UUU-UUL Where: M-MM is the dec… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.8 | ScalarocStbHostCardBindingStatus | read-only | current | The status of CableCARD/Host mutual authentication and binding. 'unknown' means the binding state has not been determined. For example, mutual authentication m… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.9 | ScalarocStbHostCardOpenedGenericResource | read-only | current | The hexadecimal representation of the generic feature control resource number opened using a profile reply() APDU resource_identifier field. The possible value… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.10 | ScalarocStbHostCardTimeZoneOffset | read-only | current | Decimal value of the UTC offset taken from the feature_parameters() APDU for feature_id =5 where possible values are defined in the [CCIF] specification. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.11 | ScalarocStbHostCardDaylightSavingsTimeDelta | read-only | current | Decimal value of the daylight savings delta. A 0x00 should be returned if the Card does not support this feature or if there is no delta. The ambiguity may be … |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.12 | ScalarocStbHostCardDaylightSavingsTimeEntry | read-only | current | Daylight savings entry time given as time lapsed since 12 AM Jan 6, 1980, in units of GPS seconds. All zeros should be returned if the Card does not support th… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.13 | ScalarocStbHostCardDaylightSavingsTimeExit | read-only | current | Daylight savings exit time given as time lapsed since 12 AM Jan 6, 1980, in units of GPS seconds. All zeros should be returned if the Card does not support thi… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.14 | ScalarocStbHostCardEaLocationCode | read-only | current | Contains the EA location codes as defined in American National Standard, J-STD-042. The bits corresponding to ANSI EA location codes are indicated below: SSSSS… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.15 | ScalarocStbHostCardVctId | read-only | current | Display the VTC-ID if supported. If not supported then return 0x0000. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.16 | NodeocStbHostCardCpInfo | |||
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.16.1 | ScalarocStbHostCardCpAuthKeyStatus | read-only | current | This parameter SHALL be set to 'Ready' if the Card has requested the host's authentication key via the APDU CP_data_req() with a Datatype_id = 22. This paramet… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.16.2 | ScalarocStbHostCardCpCertificateCheck | read-only | current | Display the results of the Card_DevCert verification as defined in the OpenCable CableCard Copy Protection Specification. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.16.3 | ScalarocStbHostCardCpCciChallengeCount | read-only | current | Display the Card CCI Challenge message count [CCCP] since the last boot or reset. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.16.4 | ScalarocStbHostCardCpKeyGenerationReqCount | read-only | current | Display the Copy Protection Key Generation Request count [CCCP] since the last boot or reset. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.4.16.5 | ScalarocStbHostCardCpIdList | read-only | current | Display the CP_system_id_bitmask field of the APDU CP_open_cnf() as defined in the CableCARD Copy Protection Specification Section 11.3.1.2. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.5 | NodeocStbHostInfo | |||
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.1 | ScalarocStbHostIpAddressType | read-only | current | This object was the address type for ocStbHostIpAddress, which was never implemented in a previous version of the MIB. Currently used only as a placeholder to … |
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.2 | ScalarocStbHostIpSubNetMask | read-only | current | The IP subnet mask of the Host address. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.3 | ScalarocStbHostOobMessageMode | read-only | current | Out of Band Messaging communications mode currently employed by the Host2.x. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.4 | NodeocStbHostDumpTrapInfo | |||
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.4.1 | ScalarocStbHostDumpEventCount | read-write | current | The number of times the host should notify the headend(s) of a dump condition (e.g., stack dumps after boot). When an exception occurs, if ocStbHostDumpEventCo… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.4.2 | ScalarocStbHostDumpNow | read-write | current | True(1) forces an immediate dump of a component of the Host. The Host will prepare the dump file then send the Notification-PDU to the headend. This simulates … |
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.4.3 | ScalarocStbHostDumpEventTimeout | read-write | current | The time, in seconds, after a SNMPv2-Trap-PDU has been sent to the headend that the Host will wait before abandoning the dump transfer. If the Host does not re… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.4.4 | ScalarocStbHostDumpFilePath | read-only | current | Dump file path and name. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.5 | NodeocStbHostSpecificationsInfo | |||
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.5.1 | ScalarocStbHostCfrSpecificationIssue | read-only | current | The Host CFR version implemented in this device (e.g., OC-SP-HOST2.1-CFR-I06-081114). |
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.5.2 | ScalarocStbHostMibSpecificationIssue | read-only | current | The version implemented in this device (e.g., OC-SP-MIB-HOST2.X-I05-081114). |
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.6 | ScalarocStbHostBootStatus | read-only | current | Defines the current status of the host during or after boot process. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.7 | NodeocStbHostContentErrorSummaryInfo | |||
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.7.1 | ScalarocStbHostPatTimeoutCount | read-write | current | These values increment every time a PAT timeout condition has occurred since the last boot or reset. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.7.2 | ScalarocStbHostPmtTimeoutCount | read-write | current | These values increment every time a PMT timeout condition has occurred since the last boot or reset. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.7.3 | ScalarocStbHostOobCarouselTimeoutCount | read-write | current | These values increment each time an implementation specific OOB Carousel timeout has occurred since the last boot or reset. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.5.7.4 | ScalarocStbHostInbandCarouselTimeoutCount | read-write | current | These values increment each time an implementation specific Inband Carousel timeout has occurred since the last boot or reset. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.6 | NodeocStbHostRebootInfo | |||
| 1.3.6.1.4.1.4491.2.3.1.1.4.6.1 | ScalarocStbHostRebootType | read-only | current | Describes the type of reboot that occurred the last time the host device rebooted. Unknown(0), unknown reboot. 0 is used as a sentinel value to denote that the… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.6.2 | ScalarocStbHostRebootReset | read-write | current | Setting this object to true(1) causes the device to reset, equivalent to a power reset. Reading this object always returns false(2). |
| 1.3.6.1.4.1.4491.2.3.1.1.4.6.3 | ScalarocStbHostRebootIpModeTlvChange | read-write | current | Setting this object to ignore(1) causes the eSTB to ignore the IP mode TLV when received during normal operation (e.g., when only the eCM is reset). The operat… |
| 1.3.6.1.4.1.4491.2.3.1.1.4.7 | NodeocStbHostMemoryInfo | |||
| 1.3.6.1.4.1.4491.2.3.1.1.4.7.1 | ScalarocStbHostLargestAvailableBlock | read-only | current | The largest available continuous block of DRAM available on the host device, in kilobytes. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.7.2 | ScalarocStbHostTotalVideoMemory | read-only | current | The total amount of DRAM dedicated to video decoding and display on the host device, in kilobytes. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.7.3 | ScalarocStbHostAvailableVideoMemory | read-only | current | The total amount of DRAM dedicated to video decoding and display on the host device that is not allocated and available for use, in kilobytes. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.7.4 | ScalarocStbHostTotalSystemMemory | read-only | current | The total amount of DRAM dedicated to system use, in kilobytes. System memory does not include video memory or any JVM memory including heap, thread stack, etc. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.7.5 | ScalarocStbHostAvailableSystemMemory | read-only | current | The total amount of DRAM dedicated to system use that is not allocated and available for use, in kilobytes. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.8 | NodeocStbHostJVMInfo | |||
| 1.3.6.1.4.1.4491.2.3.1.1.4.8.1 | ScalarocStbHostJVMHeapSize | read-only | current | The total amount of DRAM allocated to the Java Virtual Machine heap. The units are kilobytes, defined to be 1,024 bytes. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.8.2 | ScalarocStbHostJVMAvailHeap | read-only | current | The amount of DRAM in the Java Virtual Machine heap that is not allocated and is available for use. The units are kilobytes, defined to be 1,024 bytes. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.8.3 | ScalarocStbHostJVMLiveObjects | read-only | current | The number of active object instances in the Java Virtual Machine that are reachable from running code. |
| 1.3.6.1.4.1.4491.2.3.1.1.4.8.4 | ScalarocStbHostJVMDeadObjects | read-only | current | The number of object instances in the Java Virtual Machine that are NOT reachable from running Code. |
| 1.3.6.1.4.1.4491.2.3.1.2 | NodeocStbHostConformance | |||
| 1.3.6.1.4.1.4491.2.3.1.2.1 | NodeocStbHostMIBCompliances | |||
| 1.3.6.1.4.1.4491.2.3.1.2.1.1 | ComplianceocStbHostMIBCompliance | current | The requirements for conformance to the OpenCable Set-top HOST MIB. | |
| 1.3.6.1.4.1.4491.2.3.1.2.2 | NodeocStbHostMIBGroups | |||
| 1.3.6.1.4.1.4491.2.3.1.2.2.1 | GroupocStbHostSystemGroup | current | Defines the objects contained with the ocStbHost System Group. | |
| 1.3.6.1.4.1.4491.2.3.1.2.2.2 | GroupocStbHostSoftwareGroup | current | The ocStbHost Software group. | |
| 1.3.6.1.4.1.4491.2.3.1.2.2.3 | GroupocStbHostStatusGroup | current | The object group related to multiple ocStbHost status. | |
| 1.3.6.1.4.1.4491.2.3.1.2.2.4 | GroupocStbHostSecuritySubSystemGroup | current | The ocStbHost Security Subsystem group. | |
| 1.3.6.1.4.1.4491.2.3.1.2.2.5 | GroupocStbHostDeprecatedGroup | deprecated | Group of objects deprecated. | |
| 1.3.6.1.4.1.4491.2.3.1.2.2.6 | GroupocStbHostNotificationGroup | current | Defines the objects contained with the ocStbHost System Group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AudioOutputFormat | INTEGER { other(1), lpcm(2), ac3(3), eac3(4), mpeg1L1L2(5), mpeg1L3(6), mpeg2(7), mpeg4(8), dts(9), atrac(10) } | current | Defines the output format of the audio signal. |
| VideoAspectRatio | INTEGER { other(1), fourByThree(2), sixteenByNine(3) } | current | Defines the horizontal and vertical aspect ratio of the video signal. 'fourByThree' means a 4 by 3 aspect ratio. 'sixteenByNine' means a 16 by 9 aspect ratio. 'other' indicates a non-specified aspect ratio. |
| VideoContainerFormat | INTEGER { other(1), mpeg2(2), mpeg4(3) } | current | Defines the transport format. |
| VideoOutputFormat | INTEGER { format480i(1), format480p(2), format720p(3), format1080i(4), format1080p(5) } | current | Defines the output format of the video signal horizontal and vertical resolution. |