ODS-ENC-MIB
192 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1155-SMI MISSING | Counter enterprises Gauge IpAddress NetworkAddress TimeTicks |
| RFC-1158 MISSING | snmp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.50 | Nodeods | |||
| 1.3.6.1.4.1.50.1 | Nodeenc | |||
| 1.3.6.1.4.1.50.1.1 | NodenewAddressTrap | A new, physical, source address was contained in a packet received by the concentrator. This trap will be sent to each management station defined in the adminT… | ||
| 1.3.6.1.4.1.50.1.2 | NodechgAddressTrap | A physical, source address was contained in a packet received by the concentrator which was previously seen on a different card or port. This trap will be sent… | ||
| 1.3.6.1.4.1.50.1.2 | NodeencMib2 | |||
| 1.3.6.1.4.1.50.1.2.1 | NodeencSystem | |||
| 1.3.6.1.4.1.50.1.2.1.1 | NodeencBox | |||
| 1.3.6.1.4.1.50.1.2.1.1.1 | ScalarboxId | read-only | mandatory | The type of chassis used in the concentrator. For modular concentrators, the hardware is further qualifed by the value of cardId for each card installed in the… |
| 1.3.6.1.4.1.50.1.2.1.1.2 | ScalarboxDescr | read-only | mandatory | A textual description of the chassis including the ODS model number, media type and number of slots. For modular concentrators, the hardware is further qualifi… |
| 1.3.6.1.4.1.50.1.2.1.1.3 | ScalarboxNetworkMode | read-only | deprecated | The state of the network interface port. If the value is network(2), the concentrator may be cas- caded off of another network. Regardless of the value, the co… |
| 1.3.6.1.4.1.50.1.2.1.1.5 | ScalarboxGoodPackets | read-only | mandatory | The number of non-errored packets received by the concentrator. Note that this object is not maintained if the value of adminPktStatEnable is disabled(2). |
| 1.3.6.1.4.1.50.1.2.1.1.6 | ScalarboxGoodOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator. Note that this object is not maintained if the value of adminPktStatEnable … |
| 1.3.6.1.4.1.50.1.2.1.1.7 | ScalarboxNumAddresses | read-only | mandatory | The number of unique, physical, source and dest- ination addresses contained in non-errored packets received by the concentrator. Note that this object is not … |
| 1.3.6.1.4.1.50.1.2.1.1.8 | ScalarboxLostPackets | read-only | mandatory | The number of packets received by the concen- trator which could not be attributed to a card and port by the agent. This object is not main- tained if the valu… |
| 1.3.6.1.4.1.50.1.2.1.1.9 | ScalarboxMissedPackets | read-only | mandatory | The number of packets received by the concen- trator which could not be processed by the agent due to excessive network traffic. |
| 1.3.6.1.4.1.50.1.2.1.1.10 | ScalarboxCrcErrors | read-only | mandatory | The number of packets received by the concen- trator which had CRC errors. Note that this object is not maintained if the value of adminPktStat- Enable is disa… |
| 1.3.6.1.4.1.50.1.2.1.1.11 | ScalarboxAlignErrors | read-only | mandatory | The number of packets received by the concen- trator which had frame alignment errors. Note that this object is not maintained if the value of adminPktStatEnab… |
| 1.3.6.1.4.1.50.1.2.1.1.12 | ScalarboxFragErrors | read-only | mandatory | The number of packets received by the concen- trator which contained fewer than 64 octets. Note that this object is not maintained if the value of adminPktStat… |
| 1.3.6.1.4.1.50.1.2.1.1.13 | ScalarboxPacketThresh | read-write | mandatory | A threshold for monitoring the number of non- errored packets received by the concentrator. If the measured number of packets per second equals or exceeds this… |
| 1.3.6.1.4.1.50.1.2.1.1.14 | ScalarboxCrcThresh | read-write | mandatory | A threshold for monitoring the number of packets received by the concentrator which had CRC errors. If the measured number of packets per second equals or exce… |
| 1.3.6.1.4.1.50.1.2.1.1.15 | ScalarboxAlignThresh | read-write | mandatory | A threshold for monitoring the number of packets received by the concentrator which had frame alignment errors. If the measured number of packets per second eq… |
| 1.3.6.1.4.1.50.1.2.1.1.16 | ScalarboxFragThresh | read-write | mandatory | A threshold for monitoring the number of packets received by the concentrator which contained fewer than 64 octets. If the measured number of packets per secon… |
| 1.3.6.1.4.1.50.1.2.1.1.18 | TableboxAddressTable | not-accessible | mandatory | A list of address entries for each physical address contained in non-errored packets received by the concentrator. The number of entries is given by the value … |
| 1.3.6.1.4.1.50.1.2.1.1.18.1 | RowboxAddressEntry | not-accessible | mandatory | An address entry containing objects pertaining to a physical address contained in non-errored packets received by the concentrator. |
| 1.3.6.1.4.1.50.1.2.1.1.18.1.1 | ColumnbatPhysAddress | read-only | mandatory | The physical address for this entry. When reported in a trap, the physical address relevant to the trap. |
| 1.3.6.1.4.1.50.1.2.1.1.18.1.2 | ColumnbatFirstPacket | read-only | mandatory | The value of sysUpTime at the time the first packet having the address as source was received by the concentrator. Note that the value will be NULL for address… |
| 1.3.6.1.4.1.50.1.2.1.1.18.1.3 | ColumnbatLastPacket | read-only | mandatory | The value of sysUpTime at the time the most recent packet having the address as source was received by the concentrator. Note that the value will be NULL for a… |
| 1.3.6.1.4.1.50.1.2.1.1.18.1.4 | ColumnbatGoodPackets | read-only | mandatory | The number of non-errored packets received by the concentrator having the address as source. |
| 1.3.6.1.4.1.50.1.2.1.1.18.1.5 | ColumnbatGoodOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having the address as source. |
| 1.3.6.1.4.1.50.1.2.1.1.18.1.6 | ColumnbatCard | read-only | mandatory | The card on which the most recent, non-errored packet having the address as source was received. The card identified by this value is the same card as identifi… |
| 1.3.6.1.4.1.50.1.2.1.1.18.1.7 | ColumnbatPort | read-only | mandatory | The port on which the most recent, non-errored packet having the address as source was received. The port identified by this value is the same port as identifi… |
| 1.3.6.1.4.1.50.1.2.1.1.18.1.8 | ColumnbatDelete | write-only | mandatory | Setting this object to any legal, ASN.1 value deletes the entry for the address. |
| 1.3.6.1.4.1.50.1.2.1.1.18.1.9 | ColumnbatGoodPacketsTo | read-only | mandatory | The number of non-errored packets received by the concentrator having the address as dest- ination. |
| 1.3.6.1.4.1.50.1.2.1.1.18.1.10 | ColumnbatGoodOctetsTo | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having the address as destination. |
| 1.3.6.1.4.1.50.1.2.1.1.18.1.11 | ColumnbatFirstPacketTo | read-only | mandatory | The value of sysUpTime at the time the first packet having the address as destination was received by the concentrator. Note that the value will be NULL for ad… |
| 1.3.6.1.4.1.50.1.2.1.1.18.1.12 | ColumnbatLastPacketTo | read-only | mandatory | The value of sysUpTime at the time the most recent packet having the address as destination was received by the concentrator. Note that the value will be NULL … |
| 1.3.6.1.4.1.50.1.2.1.1.18.1.13 | ColumnbatLastIpAddress | read-only | mandatory | The source network address used in the most recent IP packet received by the concentrator having the address as source. Note that the value will be NULL for ad… |
| 1.3.6.1.4.1.50.1.2.1.1.19 | ScalarboxOctetThresh | read-write | mandatory | A threshold for monitoring the number of octets contained in non-errored packets received by the concentrator. If the measured number of octets per second equa… |
| 1.3.6.1.4.1.50.1.2.1.2 | NodeencCards | |||
| 1.3.6.1.4.1.50.1.2.1.2.1 | ScalarcardNumSlots | read-only | mandatory | The number of slots in the concentrator. For modular concentrators, this value is the maximum number of cards that can be installed. For non-modular concentrat… |
| 1.3.6.1.4.1.50.1.2.1.2.2 | ScalarcardNumCards | read-only | mandatory | The number of cards actually installed in the concentrator. For non-modular concentrators, the value is always two (card one contains the user ports and card t… |
| 1.3.6.1.4.1.50.1.2.1.2.3 | TablecardTable | not-accessible | mandatory | A list of card entries for each card installed in the concentrator. The number of entries is given by the value of cardNumCards. |
| 1.3.6.1.4.1.50.1.2.1.2.3.1 | RowcardEntry | not-accessible | mandatory | A card entry containing objects pertaining to a card installed in the concentrator. |
| 1.3.6.1.4.1.50.1.2.1.2.3.1.1 | ColumncardIndex | read-only | mandatory | The slot in which the card is installed. This value uniquely identifies the card. Its value ranges between 1 and the value of cardNumSlots. When reported in a … |
| 1.3.6.1.4.1.50.1.2.1.2.3.1.2 | ColumncardId | read-only | mandatory | The type of card installed in the concentrator. For non-modular concentrators, the value is the same as that of boxId. |
| 1.3.6.1.4.1.50.1.2.1.2.3.1.3 | ColumncardDescr | read-only | mandatory | A textual description of the card including the ODS model number, media type and number of ports. For non-modular concentrators, the value is the same as that … |
| 1.3.6.1.4.1.50.1.2.1.2.3.1.4 | ColumncardOperStatus | read-only | deprecated | The current operational state of the card. Note that this object currently has no meaning and may be deleted from future versions of the MIB. |
| 1.3.6.1.4.1.50.1.2.1.2.3.1.5 | ColumncardAdminStatus | read-write | deprecated | The desired state of the card. Note that this object currently has no meaning and may be deleted from future versions of the MIB. |
| 1.3.6.1.4.1.50.1.2.1.2.3.1.6 | ColumncardGoodPackets | read-only | mandatory | The number of non-errored packets received on the card. Note that this object is not maintained if the value of adminPktStatEnable is disabled(2). |
| 1.3.6.1.4.1.50.1.2.1.2.3.1.7 | ColumncardGoodOctets | read-only | mandatory | The number of octets contained in non-errored packets received on the card. Note that this object is not maintained if the value of adminPktStatEnable is disab… |
| 1.3.6.1.4.1.50.1.2.1.2.3.1.8 | ColumncardNumAddresses | read-only | mandatory | The number of unique, physical, source addresses contained in non-errored packets received on the card. Note that this object is not maintained if the value of… |
| 1.3.6.1.4.1.50.1.2.1.2.3.1.9 | ColumncardCrcErrors | read-only | mandatory | The number of packets received on the card which had CRC errors. Note that this object is not maintained if the value of adminPktStatEnable is disabled(2). |
| 1.3.6.1.4.1.50.1.2.1.2.3.1.10 | ColumncardAlignErrors | read-only | mandatory | The number of packets received on the card which had frame alignment errors. Note that this object is not maintained if the value of adminPktStatEnable is disa… |
| 1.3.6.1.4.1.50.1.2.1.2.3.1.11 | ColumncardFragErrors | read-only | mandatory | The number of packets received on the card which contained fewer than 64 octets. Note that this object is not maintained if the value of admin- PktStatEnable i… |
| 1.3.6.1.4.1.50.1.2.1.2.3.1.12 | ColumncardPacketThresh | read-write | mandatory | A threshold for monitoring the number of non- errored packets received on the card. If the measured number of packets per second equals or exceeds this value, … |
| 1.3.6.1.4.1.50.1.2.1.2.3.1.13 | ColumncardCrcThresh | read-write | mandatory | A threshold for monitoring the number of packets received on the card which had CRC errors. If the measured number of packets per second equals or exceeds this… |
| 1.3.6.1.4.1.50.1.2.1.2.3.1.14 | ColumncardAlignThresh | read-write | mandatory | A threshold for monitoring the number of packets received on the card which had frame alignment errors. If the measured number of packets per second equals or … |
| 1.3.6.1.4.1.50.1.2.1.2.3.1.15 | ColumncardFragThresh | read-write | mandatory | A threshold for monitoring the number of packets received on the card which contained fewer than 64 octets. If the measured number of packets per second equals… |
| 1.3.6.1.4.1.50.1.2.1.2.3.1.16 | ColumncardNumPorts | read-only | mandatory | The number of configurable ports on the card. For some cards, the value may be zero. |
| 1.3.6.1.4.1.50.1.2.1.2.3.1.17 | ColumncardOctetThresh | read-write | mandatory | A threshold for monitoring the number of octets contained in non-errored packets received on the card. If the measured number of octets per second equals or ex… |
| 1.3.6.1.4.1.50.1.2.1.2.3.1.18 | ColumncardNetworkMode | read-write | mandatory | The state of the back-plane connection on the card. If the value is stand-alone(3), the ports on the card form a separate, isolated network from the rest of th… |
| 1.3.6.1.4.1.50.1.2.1.3 | NodeencPorts | |||
| 1.3.6.1.4.1.50.1.2.1.3.1 | TableportTable | not-accessible | mandatory | A list of port entries for each interface port in the concentrator. The number of entries is given by the sum of cardNumPorts for each card in the cardTable. |
| 1.3.6.1.4.1.50.1.2.1.3.1.1 | RowportEntry | not-accessible | mandatory | A port entry containing objects pertaining to an interface port in the concentrator. |
| 1.3.6.1.4.1.50.1.2.1.3.1.1.1 | ColumnportCard | read-only | mandatory | The card on which the port exists. The card identified by this value is the same card as identified by the same value of cardIndex. When reported in a trap, th… |
| 1.3.6.1.4.1.50.1.2.1.3.1.1.2 | ColumnportIndex | read-only | mandatory | An integer which uniquely identifes this port on the card. Its value ranges between 1 and the value of cardNumPorts for the card. When reported in a trap, the … |
| 1.3.6.1.4.1.50.1.2.1.3.1.1.3 | ColumnportOperStatus | read-only | mandatory | The current operational state of the port. If the value is down(2), no data is passed through the port. |
| 1.3.6.1.4.1.50.1.2.1.3.1.1.4 | ColumnportAdminStatus | read-write | mandatory | The desired state of the port. If the value is down(2), no data is passed through the port. When reported in a trap, the new state of the port. If the value is… |
| 1.3.6.1.4.1.50.1.2.1.3.1.1.5 | ColumnportGoodPackets | read-only | mandatory | The number of non-errored packets received on the port. Note that this object is not maintained if the value of adminPktStatEnable is disabled(2). |
| 1.3.6.1.4.1.50.1.2.1.3.1.1.6 | ColumnportGoodOctets | read-only | mandatory | The number of octets contained in non-errored packets received on the port. Note that this object is not maintained if the value of adminPktStatEnable is disab… |
| 1.3.6.1.4.1.50.1.2.1.3.1.1.7 | ColumnportNumAddresses | read-only | mandatory | The number of unique, physical, source addresses contained in non-errored packets received on the port. Note that this object is not maintained if the value of… |
| 1.3.6.1.4.1.50.1.2.1.3.1.1.8 | ColumnportCrcErrors | read-only | mandatory | The number of packets received on the port which had CRC errors. Note that this object is not maintained if the value of adminPktStatEnable is disabled(2). |
| 1.3.6.1.4.1.50.1.2.1.3.1.1.9 | ColumnportAlignErrors | read-only | mandatory | The number of packets received on the port which had frame alignment errors. Note that this object is not maintained if the value of adminPktStatEnable is disa… |
| 1.3.6.1.4.1.50.1.2.1.3.1.1.10 | ColumnportFragErrors | read-only | mandatory | The number of packets received on the port which contained fewer than 64 octets. Note that this object is not maintained if the value of admin- PktStatEnable i… |
| 1.3.6.1.4.1.50.1.2.1.3.1.1.11 | ColumnportPacketThresh | read-write | mandatory | A threshold for monitoring the number of non- errored packets received on the port. If the measured number of packets per second equals or exceeds this value, … |
| 1.3.6.1.4.1.50.1.2.1.3.1.1.12 | ColumnportCrcThresh | read-write | mandatory | A threshold for monitoring the number of packets received on the port which had CRC errors. If the measured number of packets per second equals or exceeds this… |
| 1.3.6.1.4.1.50.1.2.1.3.1.1.13 | ColumnportAlignThresh | read-write | mandatory | A threshold for monitoring the number of packets received on the port which had frame alignment errors. If the measured number of packets per second equals or … |
| 1.3.6.1.4.1.50.1.2.1.3.1.1.14 | ColumnportFragThresh | read-write | mandatory | A threshold for monitoring the number of packets received on the port which contained fewer than 64 octets. If the measured number of packets per second equals… |
| 1.3.6.1.4.1.50.1.2.1.3.1.1.15 | ColumnportOctetThresh | read-write | mandatory | A threshold for monitoring the number of octets contained in non-errored packets received on the port. If the measured number of octets per second equals or ex… |
| 1.3.6.1.4.1.50.1.2.1.3.1.1.16 | ColumnportLinkStatus | read-only | mandatory | The link status for the port. For media types that do not support link status, the value is always unsupported(1). When reported in a trap, the new link status… |
| 1.3.6.1.4.1.50.1.2.1.3.1.1.17 | ColumnportAutoOffEnable | read-write | mandatory | The state of the auto-shutoff feature for the port. If the value is enabled(1), the value of portAdminStatus for the port will be changed to down(1) whenever a… |
| 1.3.6.1.4.1.50.1.2.1.3.1.1.18 | ColumnportAddrTrapEnable | read-write | mandatory | The state of the new-address detection feature for the port. If the value is enabled(1), a newAddressTrap will be generated whenever a new, physical, source ad… |
| 1.3.6.1.4.1.50.1.2.1.3.2 | TableportAddressTable | not-accessible | mandatory | A table of address entries, indexed by card and port, for each physical, source address contained in non-errored packets received by the concen- trator. The nu… |
| 1.3.6.1.4.1.50.1.2.1.3.2.1 | RowportAddressEntry | not-accessible | mandatory | An address entry containing objects pertaining to a physical, source address in non-errored packets received by the concentrator. |
| 1.3.6.1.4.1.50.1.2.1.3.2.1.1 | ColumnpatPhysAddress | read-only | mandatory | The physical address for this entry. |
| 1.3.6.1.4.1.50.1.2.1.3.2.1.2 | ColumnpatFirstPacket | read-only | mandatory | The value of sysUpTime at the time the first packet having the address as source was received by the concentrator. Note that the value will be NULL for address… |
| 1.3.6.1.4.1.50.1.2.1.3.2.1.3 | ColumnpatLastPacket | read-only | mandatory | The value of sysUpTime at the time the most recent packet having the address as source was received by the concentrator. Note that the value will be NULL for a… |
| 1.3.6.1.4.1.50.1.2.1.3.2.1.4 | ColumnpatGoodPackets | read-only | mandatory | The number of non-errored packets received by the concentrator having the address as source. |
| 1.3.6.1.4.1.50.1.2.1.3.2.1.5 | ColumnpatGoodOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having the address as source. |
| 1.3.6.1.4.1.50.1.2.1.3.2.1.6 | ColumnpatCard | read-only | mandatory | The card on which the most recent, non-errored packet having the address as source was received. The card identified by this value is the same card as identifi… |
| 1.3.6.1.4.1.50.1.2.1.3.2.1.7 | ColumnpatPort | read-only | mandatory | The port on which the most recent, non-errored packet having the address as source was received. The port identified by this value is the same port as identifi… |
| 1.3.6.1.4.1.50.1.2.1.3.2.1.8 | ColumnpatDelete | write-only | mandatory | Setting this object to any legal, ASN.1 value deletes the entry for the address. |
| 1.3.6.1.4.1.50.1.2.1.3.2.1.9 | ColumnpatGoodPacketsTo | read-only | mandatory | The number of non-errored packets received by the concentrator having the address as dest- ination. |
| 1.3.6.1.4.1.50.1.2.1.3.2.1.10 | ColumnpatGoodOctetsTo | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having the address as destination. |
| 1.3.6.1.4.1.50.1.2.1.3.2.1.11 | ColumnpatFirstPacketTo | read-only | mandatory | The value of sysUpTime at the time the first packet having the address as destination was received by the concentrator. Note that the value will be NULL for ad… |
| 1.3.6.1.4.1.50.1.2.1.3.2.1.12 | ColumnpatLastPacketTo | read-only | mandatory | The value of sysUpTime at the time the most recent packet having the address as destination was received by the concentrator. Note that the value will be NULL … |
| 1.3.6.1.4.1.50.1.2.1.3.2.1.13 | ColumnpatLastIpAddress | read-only | mandatory | The source network address used in the most recent IP packet received by the concentrator having the address as source. Note that the value will be NULL for ad… |
| 1.3.6.1.4.1.50.1.2.2 | NodeencAdmin | |||
| 1.3.6.1.4.1.50.1.2.2.1 | ScalaradminLocalTime | read-write | mandatory | The local time of day at the concentrator. The value is a string of three binary-coded-decimal octets in the form HH MM SS, where HH is the hour (24 hour forma… |
| 1.3.6.1.4.1.50.1.2.2.2 | ScalaradminLocalDate | read-write | mandatory | The local date at the concentrator. The value is a string of three binary-coded-decimal octets in the form YY MM DD, where YY is the year, MM is the month and … |
| 1.3.6.1.4.1.50.1.2.2.3 | ScalaradminSerialBaud | read-write | mandatory | The baud rate used for out-of-band management via the asynchronous port on the concentrator. |
| 1.3.6.1.4.1.50.1.2.2.4 | ScalaradminSerialTerm | read-write | mandatory | The type of terminal used for out-of-band management via the asynchronous port on the concentrator. |
| 1.3.6.1.4.1.50.1.2.2.5 | TableadminAccessTable | not-accessible | mandatory | A list of access entries mapping community names into access privileges. The maximum number of entries is given by accMaxEntries. |
| 1.3.6.1.4.1.50.1.2.2.5.1 | RowadminAccessEntry | not-accessible | mandatory | An access entry which maps a community name into an access privilege. |
| 1.3.6.1.4.1.50.1.2.2.5.1.1 | ColumnaccIndex | read-only | mandatory | An integer which uniquely identifies this entry. |
| 1.3.6.1.4.1.50.1.2.2.5.1.2 | ColumnaccCommunity | read-write | mandatory | The community name for the entry. Setting this object to a null string effectively invalidates the entry. However, accDelete should be used to delete entries a… |
| 1.3.6.1.4.1.50.1.2.2.5.1.3 | ColumnaccPrivilege | read-write | mandatory | The access privilege afforded the community name in the entry. |
| 1.3.6.1.4.1.50.1.2.2.5.1.4 | ColumnaccDelete | write-only | mandatory | Setting this object to any legal, ASN.1 value deletes the entry for the community name. |
| 1.3.6.1.4.1.50.1.2.2.6 | TableadminTrapTable | not-accessible | mandatory | A list of trap entries for each network manager which receives traps from the agent. The maximum number of entries is given by trapMaxEntries. |
| 1.3.6.1.4.1.50.1.2.2.6.1 | RowadminTrapEntry | not-accessible | mandatory | A trap entry containing objects pertaining to a network manager which receives traps from the agent. |
| 1.3.6.1.4.1.50.1.2.2.6.1.2 | ColumntrapCommunity | read-write | mandatory | The community name used in traps sent to the management station. |
| 1.3.6.1.4.1.50.1.2.2.6.1.3 | ColumntrapDestAddress | read-write | mandatory | The IP address of the management station to receive traps. Note that setting this object to a value of all zeros effectively invalidates the entry. However, tr… |
| 1.3.6.1.4.1.50.1.2.2.6.1.4 | ColumntrapBoxEnable | read-write | mandatory | The state of the box-class trap enable for the management station. If the value is disabled(2), box-class traps will not be sent. |
| 1.3.6.1.4.1.50.1.2.2.6.1.5 | ColumntrapCardEnable | read-write | mandatory | The state of the card-class trap enable for the management station. If the value is disabled(2), card-class traps will not be sent. |
| 1.3.6.1.4.1.50.1.2.2.6.1.6 | ColumntrapPortEnable | read-write | mandatory | The state of the port-class trap enable for the management station. If the value is disabled(2), port-class traps will not be sent. |
| 1.3.6.1.4.1.50.1.2.2.6.1.7 | ColumntrapAddrEnable | read-write | mandatory | The state of the address-class trap enable for the management station. If the value is disabled(2), address- class traps will not be sent. |
| 1.3.6.1.4.1.50.1.2.2.6.1.8 | ColumntrapStdEnable | read-write | mandatory | The state of the standard-class trap enable for the management station. If the value is disabled(2), standard SNMP traps will not be sent. |
| 1.3.6.1.4.1.50.1.2.2.6.1.9 | ColumntrapDelete | write-only | mandatory | Setting this object to any legal, ASN.1 value deletes the entry for the management station. |
| 1.3.6.1.4.1.50.1.2.2.7 | ScalaradminTrapId | read-only | mandatory | The number of unique traps generated by the agent since it was reset. When reported in a trap, an integer which uniquely identifies the trap. |
| 1.3.6.1.4.1.50.1.2.2.8 | ScalaradminTrapAddress | not-accessible | mandatory | When reported in a trap, the source IP address of a PDU which resulted in an authentication failure. |
| 1.3.6.1.4.1.50.1.2.2.9 | ScalaradminPrivilege | read-only | mandatory | The access privilege afforded the community name used in the requesting PDU. This value allows a network manager to easily determine its ability to read and wr… |
| 1.3.6.1.4.1.50.1.2.2.10 | ScalaraccMaxEntries | read-only | mandatory | The maximum number of access privilege entries allowed in adminAccessTable. |
| 1.3.6.1.4.1.50.1.2.2.11 | ScalartrapMaxEntries | read-only | mandatory | The maximum number of network manager entries allowed in adminTrapTable. |
| 1.3.6.1.4.1.50.1.2.2.12 | ScalaradminPktStatEnable | read-write | mandatory | The state of the packet statistics collection feature. If the value is enabled(1), the management agent will maintain statistics for all packets received by th… |
| 1.3.6.1.4.1.50.1.2.2.13 | ScalaradminAddrStatEnable | read-write | mandatory | The state of the address statistics collection feature. If the value is enabled(1), the manage- ment agent will maintain statistics for all packets received by… |
| 1.3.6.1.4.1.50.1.2.2.14 | ScalaradminProtStatEnable | read-write | mandatory | The state of the protocol statistics collection feature. If the value is enabled(1), the manage- ment agent will maintain statistics for all packets received b… |
| 1.3.6.1.4.1.50.1.2.2.15 | ScalaradminIpCheckEnable | read-write | mandatory | The state of the IP address detection feature. If the value is enabled(1) and the value of adminAddr- StatEnable is also enabled(1), the management agent will … |
| 1.3.6.1.4.1.50.1.2.2.16 | ScalaradminReboot | write-only | mandatory | Setting this object to any legal, ASN.1 value recycles the management agent in the concentrator. |
| 1.3.6.1.4.1.50.1.2.2.17 | ScalaradminSecureTerm | read-write | mandatory | The status of the out-of-band interface. If the value is secured(1), the user is be required to enter a super-user level community name before any management f… |
| 1.3.6.1.4.1.50.1.3 | NodeboxPacketTrap | The measured rate of packets received by the concentrator has exceeded the value of boxPacket- Thresh. This trap will be sent to each management station define… | ||
| 1.3.6.1.4.1.50.1.3 | NodeencExper | |||
| 1.3.6.1.4.1.50.1.3.1 | NodeencProtos | |||
| 1.3.6.1.4.1.50.1.3.1.1 | NodeboxProtos | |||
| 1.3.6.1.4.1.50.1.3.1.1.1 | ScalarbpUnkPackets | read-only | mandatory | The number of non-errored packets received by the concentrator having an unknown protocol type. Note that this object is not maintained if the value of adminPr… |
| 1.3.6.1.4.1.50.1.3.1.1.2 | ScalarbpIPPackets | read-only | mandatory | The number of non-errored packets received by the concentrator having a DOD (IP, ARP, RARP) protocol type. Note that this object is not maintained if the value… |
| 1.3.6.1.4.1.50.1.3.1.1.3 | ScalarbpISOPackets | read-only | mandatory | The number of non-errored packets received by the concentrator having an ISO protocol type. Note that this object is not maintained if the value of adminProtSt… |
| 1.3.6.1.4.1.50.1.3.1.1.4 | ScalarbpDECPackets | read-only | mandatory | The number of non-errored packets received by the concentrator having a DEC protocol type. Note that this object is not maintained if the value of adminProtSta… |
| 1.3.6.1.4.1.50.1.3.1.1.5 | ScalarbpNWPackets | read-only | mandatory | The number of non-errored packets received by the concentrator having a NetWare protocol type. Note that this object is not maintained if the value of adminPro… |
| 1.3.6.1.4.1.50.1.3.1.1.6 | ScalarbpATPackets | read-only | mandatory | The number of non-errored packets received by the concentrator having an AppleTalk protocol type. Note that this object is not maintained if the value of admin… |
| 1.3.6.1.4.1.50.1.3.1.1.7 | ScalarbpXNSPackets | read-only | mandatory | The number of non-errored packets received by the concentrator having an XNS protocol type. Note that this object is not maintained if the value of adminProtSt… |
| 1.3.6.1.4.1.50.1.3.1.1.8 | ScalarbpSNAPackets | read-only | mandatory | The number of non-errored packets received by the concentrator having an SNA protocol type. Note that this object is not maintained if the value of adminProtSt… |
| 1.3.6.1.4.1.50.1.3.1.1.9 | ScalarbpUnkOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having an unknown protocol type. Note that this object is not maintained if … |
| 1.3.6.1.4.1.50.1.3.1.1.10 | ScalarbpIPOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having a DOD (IP, ARP, RARP) protocol type. Note that this object is not mai… |
| 1.3.6.1.4.1.50.1.3.1.1.11 | ScalarbpISOOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having an ISO protocol type. Note that this object is not maintained if the … |
| 1.3.6.1.4.1.50.1.3.1.1.12 | ScalarbpDECOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having a DEC protocol type. Note that this object is not maintained if the v… |
| 1.3.6.1.4.1.50.1.3.1.1.13 | ScalarbpNWOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having a NetWare protocol type. Note that this object is not maintained if t… |
| 1.3.6.1.4.1.50.1.3.1.1.14 | ScalarbpATOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having an AppleTalk protocol type. Note that this object is not maintained i… |
| 1.3.6.1.4.1.50.1.3.1.1.15 | ScalarbpXNSOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having an XNS protocol type. Note that this object is not maintained if the … |
| 1.3.6.1.4.1.50.1.3.1.1.16 | ScalarbpSNAOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having an SNA protocol type. Note that this object is not maintained if the … |
| 1.3.6.1.4.1.50.1.3.1.2 | NodeaddrProtos | |||
| 1.3.6.1.4.1.50.1.3.1.2.1 | TableaddrProtoTable | not-accessible | mandatory | A list of protocol entries for each physical address contained in non-errored packets received by the concentrator. The number of entries is given by the value… |
| 1.3.6.1.4.1.50.1.3.1.2.1.1 | RowaddrProtoEntry | not-accessible | mandatory | A protocol entry containing objects pertaining to a physical address contained in non-errored packets received by the concentrator. |
| 1.3.6.1.4.1.50.1.3.1.2.1.1.1 | ColumnapUnkPackets | read-only | mandatory | The number of non-errored packets received by the concentrator having the address as source and an unknown protocol type. Note that this object is not maintain… |
| 1.3.6.1.4.1.50.1.3.1.2.1.1.2 | ColumnapIPPackets | read-only | mandatory | The number of non-errored packets received by the concentrator having the address as source and a DOD (IP, ARP, RARP) protocol type. Note that this object is n… |
| 1.3.6.1.4.1.50.1.3.1.2.1.1.3 | ColumnapISOPackets | read-only | mandatory | The number of non-errored packets received by the concentrator having the address as source and an ISO protocol type. Note that this object is not maintained i… |
| 1.3.6.1.4.1.50.1.3.1.2.1.1.4 | ColumnapDECPackets | read-only | mandatory | The number of non-errored packets received by the concentrator having the address as source and a DEC protocol type. Note that this object is not maintained if… |
| 1.3.6.1.4.1.50.1.3.1.2.1.1.5 | ColumnapNWPackets | read-only | mandatory | The number of non-errored packets received by the concentrator having the address as source and a NetWare protocol type. Note that this object is not maintaine… |
| 1.3.6.1.4.1.50.1.3.1.2.1.1.6 | ColumnapATPackets | read-only | mandatory | The number of non-errored packets received by the concentrator having the address as source and an AppleTalk protocol type. Note that this object is not mainta… |
| 1.3.6.1.4.1.50.1.3.1.2.1.1.7 | ColumnapXNSPackets | read-only | mandatory | The number of non-errored packets received by the concentrator having the address as source and an XNS protocol type. Note that this object is not maintained i… |
| 1.3.6.1.4.1.50.1.3.1.2.1.1.8 | ColumnapSNAPackets | read-only | mandatory | The number of non-errored packets received by the concentrator having the address as source and an SNA protocol type. Note that this object is not maintained i… |
| 1.3.6.1.4.1.50.1.3.1.2.1.1.9 | ColumnapUnkOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having the address as source and an unknown protocol type. Note that this ob… |
| 1.3.6.1.4.1.50.1.3.1.2.1.1.10 | ColumnapIPOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having the address as source and a DOD (IP, ARP, RARP) protocol type. Note t… |
| 1.3.6.1.4.1.50.1.3.1.2.1.1.11 | ColumnapISOOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having the address as source and an ISO protocol type. Note that this object… |
| 1.3.6.1.4.1.50.1.3.1.2.1.1.12 | ColumnapDECOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having the address as source and a DEC protocol type. Note that this object … |
| 1.3.6.1.4.1.50.1.3.1.2.1.1.13 | ColumnapNWOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having the address as source and a NetWare protocol type. Note that this obj… |
| 1.3.6.1.4.1.50.1.3.1.2.1.1.14 | ColumnapATOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having the address as source and an AppleTalk protocol type. Note that this … |
| 1.3.6.1.4.1.50.1.3.1.2.1.1.15 | ColumnapXNSOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having the address as source and an XNS protocol type. Note that this object… |
| 1.3.6.1.4.1.50.1.3.1.2.1.1.16 | ColumnapSNAOctets | read-only | mandatory | The number of octets contained in non-errored packets received by the concentrator having the address as source and an SNA protocol type. Note that this object… |
| 1.3.6.1.4.1.50.1.3.1.2.1.1.17 | ColumnapPhysAddress | read-only | mandatory | The physical address for this entry. |
| 1.3.6.1.4.1.50.1.4 | NodeboxOctetTrap | The measured rate of octets contained in packets received by the concentrator has exceeded the value of boxOctetThresh. This trap will be sent to each manageme… | ||
| 1.3.6.1.4.1.50.1.5 | NodeboxCrcTrap | The measured rate of packets received by the concentrator which had CRC errors has exceeded the value of boxCrcThresh. This trap will be sent to each managemen… | ||
| 1.3.6.1.4.1.50.1.6 | NodeboxAlignTrap | The measured rate of packets received by the concentrator which had frame alignment errors has exceeded the value of boxAlignThresh. This trap will be sent to … | ||
| 1.3.6.1.4.1.50.1.7 | NodeboxFragTrap | The measured rate of packets received by the concentrator which contained fewer than 64 octets has exceeded the value of boxFragThresh. This trap will be sent … | ||
| 1.3.6.1.4.1.50.1.8 | NodecardPacketTrap | The measured rate of packets received on a card has exceeded the value of cardPacketThresh for that card. This trap will be sent to each manage- ment station d… | ||
| 1.3.6.1.4.1.50.1.9 | NodecardOctetTrap | The measured rate of octets contained in packets received on a card has exceeded the value of card- OctetThresh for that card. This trap will be sent to each m… | ||
| 1.3.6.1.4.1.50.1.10 | NodecardCrcTrap | The measured rate of packets received on a card which had CRC errors has exceeded the value of cardCrcThresh for that card. This trap will be sent to each mana… | ||
| 1.3.6.1.4.1.50.1.11 | NodecardAlignTrap | The measured rate of packets received on a card which had frame alignment errors has exceeded the value of cardAlignThresh for that card. This trap will be sen… | ||
| 1.3.6.1.4.1.50.1.12 | NodecardFragTrap | The measured rate of packets received on a card which contained fewer than 64 octets has exceeded the value of cardFragThresh for that card. This trap will be … | ||
| 1.3.6.1.4.1.50.1.13 | NodeportPacketTrap | The measured rate of packets received on a port has exceeded the value of portPacketThresh for that port. This trap will be sent to each management station def… | ||
| 1.3.6.1.4.1.50.1.14 | NodeportOctetTrap | The measured rate of octets contained in packets received on a port has exceeded the value of port- OctetThresh for that port. This trap will be sent to each m… | ||
| 1.3.6.1.4.1.50.1.15 | NodeportCrcTrap | The measured rate of packets received on a port which had CRC errors has exceeded the value of portCrcThresh for that port. This trap will be sent to each mana… | ||
| 1.3.6.1.4.1.50.1.16 | NodeportAlignTrap | The measured rate of packets received on a port which had frame alignment errors has exceeded the value of portAlignThresh for that port. This trap will be sen… | ||
| 1.3.6.1.4.1.50.1.17 | NodeportFragTrap | The measured rate of packets received on a port which contained fewer than 64 octets has exceeded the value of portFragThresh for that port. This trap will be … | ||
| 1.3.6.1.4.1.50.1.18 | NodeportLinkTrap | The link status for a port has changed states. This trap will be sent to each management station defined in the adminTrapTable for which the value of trapPortE… | ||
| 1.3.6.1.4.1.50.2 | NodeenBridge | |||
| 1.3.6.1.4.1.50.3 | NodetokenRing | |||
| 1.3.6.1.4.1.50.4 | NodetrBridge | |||
| 1.3.6.1.4.1.10297.202.7000.7.2.0 | NodecoldStartTrap | The agent has re-initialized and may need to be reconfigured. This trap will be sent to each management station defined in the adminTrapTable for which the val… | ||
| 1.3.6.1.4.1.10297.202.7000.7.2.1 | NodewarmStartTrap | The agent has re-initialized but does not need to be reconfigured. This trap will be sent to each management station defined in the adminTrapTable for which th… | ||
| 1.3.6.1.4.1.10297.202.7000.7.2.4 | NodeauthFailTrap | An SNMP request was received that did not have a valid community name or a write was attempted on a read-only variable. This trap will be sent to each manageme… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| PhysAddress | OCTET STRING |