ODS-TRMIB
83 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1155-SMI MISSING | Counter enterprises Gauge IpAddress NetworkAddress TimeTicks |
| RFC-1158 MISSING | snmp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.50 | Nodeods | |||
| 1.3.6.1.4.1.50.1 | Nodeenc | |||
| 1.3.6.1.4.1.50.1.1 | NodeloopBackTrap | The LoopBack state of a RingIn or RingOut port has changed. The changedValue indicates the current LoopBack state. This trap will only be sent if the value of … | ||
| 1.3.6.1.4.1.50.1.2 | NoderingInsertTrap | The RingInsertion state of a user port has changed. The changedValue indicates the current RingInsertion state. This trap will only be sent if the value of teR… | ||
| 1.3.6.1.4.1.50.1.3 | NodedeinCountTrap | The DeinCount value for a user port has incremented above 1. The changedValue indicates the current value for DeinCount. This trap will only be sent if the val… | ||
| 1.3.6.1.4.1.50.1.4 | NodeportDisabledTrap | The PortEnable for a user port has been automatically disabled due to an excessive number of consecutive deinsertions. (Excessive is defined by boxMaxDeinCount… | ||
| 1.3.6.1.4.1.50.1.5 | NodeswitchChangeTrap | A Switch has changed on the front panel of the box. The changedOid defines the variable that has has changed. The changedValue indicates the current value for … | ||
| 1.3.6.1.4.1.50.2 | NodeenBridge | |||
| 1.3.6.1.4.1.50.3 | NodetokenRing | |||
| 1.3.6.1.4.1.50.3.1 | NodetrMib1 | |||
| 1.3.6.1.4.1.50.3.1.1 | NodetrSystem | |||
| 1.3.6.1.4.1.50.3.1.1.1 | NodetrBox | |||
| 1.3.6.1.4.1.50.3.1.1.1.1 | ScalarboxChassisId | read-only | mandatory | The type of chassis used for the concentrator. For modular concentrators, the hardware is further qualifed by the value of cardId for each card installed in th… |
| 1.3.6.1.4.1.50.3.1.1.1.4 | ScalarboxMaxDeinCount | read-write | mandatory | Contains the maximum number of successive de-inserts that can occur before a given port is shut off automatically. |
| 1.3.6.1.4.1.50.3.1.1.1.5 | ScalarboxMaxDeinDelta | read-write | mandatory | The maximum time in seconds between successive de-inserts for a given port for which the portDeinCount will be incremeneted. |
| 1.3.6.1.4.1.50.3.1.1.1.7 | ScalarboxReset | read-write | mandatory | Setting to 1 will reboot the agent. |
| 1.3.6.1.4.1.50.3.1.1.1.8 | ScalarboxFWVersion | read-only | mandatory | The version of the firmware that is currently resident. |
| 1.3.6.1.4.1.50.3.1.1.1.9 | ScalartrapId | not-accessible | mandatory | The trap Id for this particular trap. It is a one-up counter that identifies this trap. |
| 1.3.6.1.4.1.50.3.1.1.1.10 | ScalarchangedOid | not-accessible | mandatory | The Object Id of the variable that is the reason for sending the trap. |
| 1.3.6.1.4.1.50.3.1.1.1.11 | ScalarchangedValue | not-accessible | mandatory | The value of the variable that is being trapped. |
| 1.3.6.1.4.1.50.3.1.1.1.12 | ScalarchangedDescr | not-accessible | mandatory | A textual description of the variable, the slot, the port, and the new value that is being trapped. |
| 1.3.6.1.4.1.50.3.1.1.1.13 | ScalartftpAddress | read-write | mandatory | The IP address from which TFTP packets will be accepted by the agent. |
| 1.3.6.1.4.1.50.3.1.1.1.14 | ScalardosCommand | read-write | mandatory | A Dos command that will be executed. |
| 1.3.6.1.4.1.50.3.1.1.1.15 | ScalardosExitCode | read-only | mandatory | The status of the last executed DOS command. |
| 1.3.6.1.4.1.50.3.1.1.2 | NodetrCards | |||
| 1.3.6.1.4.1.50.3.1.1.2.1 | ScalarcardNumSlots | read-only | mandatory | The number of slots in the concentrator. For modular concentrators, this value is the maximum number of cards that can be installed. For non-modular concentrat… |
| 1.3.6.1.4.1.50.3.1.1.2.2 | ScalarcardNumCards | read-only | mandatory | The number of cards actually installed in the concentrator. For non-modular concentrators, the value is always one. |
| 1.3.6.1.4.1.50.3.1.1.2.3 | TablecardTable | not-accessible | mandatory | A list of card entries for each card installed in the concentrator. The number of entries is given by the value of CardNumCards. |
| 1.3.6.1.4.1.50.3.1.1.2.3.1 | RowcardEntry | not-accessible | mandatory | A card entry containing objects pertaining to a card installed in the concentrator. |
| 1.3.6.1.4.1.50.3.1.1.2.3.1.1 | ColumncardBypass | read-write | mandatory | The current bypass state of the card. |
| 1.3.6.1.4.1.50.3.1.1.2.3.1.2 | ColumncardRingStar | read-write | mandatory | The Ring/Star mode of the card. |
| 1.3.6.1.4.1.50.3.1.1.2.3.1.3 | ColumncardRingSpeed | read-only | mandatory | The Ring Speed of the card. |
| 1.3.6.1.4.1.50.3.1.1.2.3.1.4 | ColumncardCableType | read-write | mandatory | The card's Cable Type. |
| 1.3.6.1.4.1.50.3.1.1.2.3.1.6 | ColumncardReset | read-only | mandatory | The card's Reset Switch state. |
| 1.3.6.1.4.1.50.3.1.1.2.3.1.7 | ColumncardSwitch | read-only | mandatory | The state of the HW/SW switch on the card. |
| 1.3.6.1.4.1.50.3.1.1.2.3.1.8 | ColumncardControl | read-only | mandatory | Who currently controls the card, HW or SW. |
| 1.3.6.1.4.1.50.3.1.1.2.3.1.9 | ColumncardId | read-only | mandatory | The type of card installed in the concentrator. |
| 1.3.6.1.4.1.50.3.1.1.2.3.1.10 | ColumncardIndex | read-only | mandatory | The slot in which the card is installed. This value uniquely identifies the card. Its value ranges between 1 and the value of CardNumSlots. |
| 1.3.6.1.4.1.50.3.1.1.2.3.1.11 | ColumncardDescrip | read-only | mandatory | A textual description of the card including the ODS model number, media type and number of ports. |
| 1.3.6.1.4.1.50.3.1.1.2.3.1.12 | ColumncardNumPorts | read-only | mandatory | The number of configurable ports on the card. For some cards, the value may be zero. |
| 1.3.6.1.4.1.50.3.1.1.2.3.1.13 | ColumncardHasPorts | read-only | mandatory | This value describes if there are configurable user ports on the card. |
| 1.3.6.1.4.1.50.3.1.1.2.3.1.14 | ColumncardHasRingInt | read-only | mandatory | This value describes if the card has ring in and ring out ports. |
| 1.3.6.1.4.1.50.3.1.1.2.3.1.15 | ColumncardHasTW | read-only | mandatory | This value describes if the card's user ports are twisted wire or not. |
| 1.3.6.1.4.1.50.3.1.1.3 | NodetrPorts | |||
| 1.3.6.1.4.1.50.3.1.1.3.1 | TableportTable | not-accessible | mandatory | A list of port entries for each interface port in the concentrator. The number of entries is given by the sum of CardNumPorts for each card in the CardTable. |
| 1.3.6.1.4.1.50.3.1.1.3.1.1 | RowportEntry | not-accessible | mandatory | A port entry containing objects pertaining to an interface port in the concentrator. |
| 1.3.6.1.4.1.50.3.1.1.3.1.1.1 | ColumnportEnable | read-write | mandatory | The current enable status of the port. If the value is off(2), no data is passed through the port. |
| 1.3.6.1.4.1.50.3.1.1.3.1.1.2 | ColumnportActStatus | read-only | mandatory | Whether we currently see activity on the port. If we have activity, then the value is true(1). |
| 1.3.6.1.4.1.50.3.1.1.3.1.1.3 | ColumnportRingInsert | read-only | mandatory | Whether someone is currently inserted onto the ring through this port. If true(1), then someone is inserted onto this port. |
| 1.3.6.1.4.1.50.3.1.1.3.1.1.4 | ColumnportDeinCount | read-write | mandatory | Current count of successive deinserts that occurred on this port, each within MaxDeinDelta of the previous deinsert. |
| 1.3.6.1.4.1.50.3.1.1.3.1.1.5 | ColumnportCard | read-only | mandatory | The card on which the port exists. The card identified by this value is the same card as identified by the same value of CardIndex. |
| 1.3.6.1.4.1.50.3.1.1.3.1.1.6 | ColumnportIndex | read-only | mandatory | An integer which uniquely identifes this port on the card. Its value ranges between 1 and the value of CardNumPorts for the card. |
| 1.3.6.1.4.1.50.3.1.1.4 | NodetrRing | |||
| 1.3.6.1.4.1.50.3.1.1.4.1 | TableringportTable | not-accessible | mandatory | A list of entries for Ring In and Ring Out ports of the concentrator. |
| 1.3.6.1.4.1.50.3.1.1.4.1.1 | RowringEntry | not-accessible | mandatory | A ring port entry containing objects pertaining the concentrator's Ring In and Ring Out ports. |
| 1.3.6.1.4.1.50.3.1.1.4.1.1.1 | ColumnrpMode | read-write | mandatory | The current status of the ring port. |
| 1.3.6.1.4.1.50.3.1.1.4.1.1.2 | ColumnrpFOTW | read-write | mandatory | Whether fiber optic or twisted wire are currently being used by the ring port. |
| 1.3.6.1.4.1.50.3.1.1.4.1.1.3 | ColumnrpLoopBack | read-only | mandatory | Whether the concentrator's ring port is in loopback mode. |
| 1.3.6.1.4.1.50.3.1.1.4.1.1.4 | ColumnrpVoltSense | read-only | mandatory | Whether voltage is being sensed across the ring port. |
| 1.3.6.1.4.1.50.3.1.1.4.1.1.5 | ColumnrpActStatus | read-only | mandatory | Whether we currently see activity on the port. if we have activity, then the value is true(1). |
| 1.3.6.1.4.1.50.3.1.1.4.1.1.6 | ColumnrpCarrSense | read-only | mandatory | Whether a carrier is sensed on the ring port. |
| 1.3.6.1.4.1.50.3.1.1.4.1.1.7 | ColumnrpCard | read-only | mandatory | The card on which the ring ports exist. The card identified by this value is the same card as identified by the same value of CardIndex. |
| 1.3.6.1.4.1.50.3.1.1.4.1.1.8 | ColumnrpIndex | read-only | mandatory | An integer which uniquely identifies this ring port on the card. Its value ranges between 1 (Ring In) and 2 (Ring Out). |
| 1.3.6.1.4.1.50.3.1.1.4.1.1.9 | ColumnrpHasTW | read-only | mandatory | Whether or not the ring port has Twisted Wire. |
| 1.3.6.1.4.1.50.3.1.1.5 | NodetrTrapEnable | |||
| 1.3.6.1.4.1.50.3.1.1.5.1 | ScalarteLoopBack | read-write | mandatory | The Loopback state for a ring port has changed. This trap will be sent to the defined management station(s) if the value of teLoopBack enabled(1). |
| 1.3.6.1.4.1.50.3.1.1.5.2 | ScalarteMode | read-write | mandatory | The state of the Ring Port mode switch has changed (Normal, Internal Loop, Auto Loop). This trap will be sent to the defined management station(s) if the value… |
| 1.3.6.1.4.1.50.3.1.1.5.3 | ScalarteFOTW | read-write | mandatory | The state of the Fiber Optic/Twisted Wire switch has changed. This trap will be sent to the defined management station(s) if the value of teFOTW is enabled(1). |
| 1.3.6.1.4.1.50.3.1.1.5.4 | ScalarteRingInsert | read-write | mandatory | A user was inserted onto the ring or de-inserted from the ring. This trap will be sent to the defined management station(s) if the value of teRingInsert is ena… |
| 1.3.6.1.4.1.50.3.1.1.5.5 | ScalarteDeinCount | read-write | mandatory | The De-insert count for one of the user ports is now greater than 1. This trap will be sent to the defined management station(s) if the value of teDeinCount is… |
| 1.3.6.1.4.1.50.3.1.1.5.6 | ScalarteEnable | read-write | mandatory | The state of one of the user port switches has changed. This trap will be sent to the defined management station(s) if the value of teEnable is enabled(1). |
| 1.3.6.1.4.1.50.3.1.1.5.7 | ScalarteBypass | read-write | mandatory | The state of the Bypass control switch has changed. This trap will be sent to the defined management station(s) if the value of teBypass is enabled(1). |
| 1.3.6.1.4.1.50.3.1.1.5.8 | ScalarteRingStar | read-write | mandatory | The state of the Ring/Star control switch has changed. This trap will be sent to the defined management station(s) if the value of teRingStar is enabled(1). |
| 1.3.6.1.4.1.50.3.1.1.5.9 | ScalarteRingSpeed | read-write | mandatory | The state of the Ring Speed (Clock) control switch has changed. This trap will be sent to the defined management station(s) if the value of te_4_16 is enabled(… |
| 1.3.6.1.4.1.50.3.1.1.5.10 | ScalarteCableType | read-write | mandatory | The state of the Cable Type control switch has changed. This trap will be sent to the defined management station(s) if the value of teCableType is enabled(1). |
| 1.3.6.1.4.1.50.3.1.1.5.12 | ScalarteSwitch | read-write | mandatory | The state of the HW/SW control switch has changed. This trap will be sent to the defined management station(s) if the value of teSwitch is enabled(1). |
| 1.3.6.1.4.1.50.3.1.1.5.15 | ScalarteLanManager | read-write | mandatory | The Ringin or Ringout has gone into Loopback. This alert will be sent to IBM's Lan Manager management station(s) if the value of teLanManager is enabled(1). |
| 1.3.6.1.4.1.50.3.1.2 | NodetrAdmin | |||
| 1.3.6.1.4.1.50.4 | NodetrBridge | |||
| 1.3.6.1.4.1.10297.202.7000.7.2.0 | NodecoldStartTrap | The agent has re-initialized and may need to be reconfigured. This trap will be sent to each management station defined in the communty.cfg file. | ||
| 1.3.6.1.4.1.10297.202.7000.7.2.4 | NodeauthFailTrap | An SNMP request was received that did not have a valid community name or a write was attempted on a read-only variable. This trap will be sent to each manageme… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| PhysAddress | OCTET STRING |