OPTIX-ALM-CFG-MIB
25 objects
This MIB specifies the alarm configuration
Imported Objects
| OPTIX-GLOBAL-TC-MIB | AlarmEventType ObjType |
| OPTIX-OID-MIB | optixProvisionEqpt |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.30.1 | IdentityoptixAlmCfgManage | This MIB specifies the alarm configuration | ||
| 1.3.6.1.2.1.10.4.30.1.1 | NodeoptixAlmMng | |||
| 1.3.6.1.2.1.10.4.30.1.1.1 | ScalaroptixAlmInhistate | read-write | current | This object indicates theenable status of suppressing inter-board alarms. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.30.1.1.2 | TableoptixAlmLongMngTable | not-accessible | current | This table describeslong-parameter alarm management. |
| 1.3.6.1.2.1.10.4.30.1.1.2.1 | RowoptixAlmLongMngEntry | not-accessible | current | Thisentry describeslong-parameter alarm management. |
| 1.3.6.1.2.1.10.4.30.1.1.2.1.1 | ColumnoptixAlmIdIndex | not-accessible | current | This object indicates the alarm ID defined by Huawei Software System Team. 0: long-parameter alarm |
| 1.3.6.1.2.1.10.4.30.1.1.2.1.2 | ColumnoptixAlmobjtype | not-accessible | current | This object indicates the alarm object type. Alarm severity: 1: critical 2: major 3: minor 4: warning |
| 1.3.6.1.2.1.10.4.30.1.1.2.1.3 | ColumnoptixAlmobjpara | not-accessible | current | This object indicates the contents of the alarm object parameters. |
| 1.3.6.1.2.1.10.4.30.1.1.2.1.4 | ColumnoptixAlmLevel | read-write | current | This object indicates the alarm severity. Alarm severity: 1: critical, 2: major, 3: minor, 4: warning, 5: not reported |
| 1.3.6.1.2.1.10.4.30.1.1.2.1.5 | ColumnoptixAlmMonState | read-write | current | This object indicates the alarm monitoring status. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.30.1.1.2.1.6 | ColumnoptixAlmInsertState | read-write | current | This object indicates the alarm insert state. 1: start 3: end 255: invalid |
| 1.3.6.1.2.1.10.4.30.1.1.2.1.7 | ColumnoptixAlmInsertMothed | read-write | current | This object indicates the alarm insert mothed. 1: ne, 2: bd, 3: chip, 255: invalid |
| 1.3.6.1.2.1.10.4.30.1.1.3 | TableoptixAlmInverseStateTable | not-accessible | current | This table describes Alm Inverse State |
| 1.3.6.1.2.1.10.4.30.1.1.3.1 | RowoptixAlmInverseStateEntry | not-accessible | current | This entry describes Alm Inverse State |
| 1.3.6.1.2.1.10.4.30.1.1.3.1.1 | ColumnoptixInverseAlmIdIndex | not-accessible | current | This object indicates the alarm ID. |
| 1.3.6.1.2.1.10.4.30.1.1.3.1.2 | ColumnoptixInverseAlmobjtype | not-accessible | current | This object indicates the alarm object type. |
| 1.3.6.1.2.1.10.4.30.1.1.3.1.3 | ColumnoptixInverseAlmobjpara | not-accessible | current | This object indicates the contents of the alarm object parameters. |
| 1.3.6.1.2.1.10.4.30.1.1.3.1.4 | ColumnoptixAlmInverseState | read-write | current | This object indicates the enablestatus of alarm inversion. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.30.1.1.4 | TableoptixAlmInhipairTable | not-accessible | current | This table describes inhipair |
| 1.3.6.1.2.1.10.4.30.1.1.4.1 | RowoptixAlmInhipairEntry | not-accessible | current | This entry describes inhipair |
| 1.3.6.1.2.1.10.4.30.1.1.4.1.1 | ColumnoptixAlmInhipairObjType | read-only | current | This object indicates an alarm object. |
| 1.3.6.1.2.1.10.4.30.1.1.4.1.2 | ColumnoptixAlmInhipairEid | read-only | current | This object indicates an alarm ID. |
| 1.3.6.1.2.1.10.4.30.1.1.4.1.3 | ColumnoptixAlmInhipairObjTypeED | read-only | current | This object indicates a suppressed alarm object. |
| 1.3.6.1.2.1.10.4.30.1.1.4.1.4 | ColumnoptixAlmInhipairEidED | read-only | current | This object indicates the ID of a suppressed alarm. |
| 1.3.6.1.2.1.10.4.30.1.1.4.1.255 | ColumnoptixAlmInhipairRowStatus | read-create | current | This object indicates row status. |