OPTIX-ATMIMA-MIB
179 objects
This module is usedto configure and manageATM/IMA services. The asynchronous transfer mode(ATM) is used to carryservice data by encoding them into ATM cells for trasmission. Combined with advantages of circuit switching and packet switching, the ATM can carry multiple messages and communication services through a single network with a good QoS. The inverse multiplexing for ATM (IMA) separates aggregate ATM cell streams to multiple low-speed links for transmission and multiplexes these low-speed links at the remote end in a flexible and simple manner to restore the ATM cell streams in the original sequence.
Imported Objects
| OPTIX-OID-MIB | optixProvisionPtn |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.50.1 | IdentityoptixAtmImaMod | This module is usedto configure and manageATM/IMA services. The asynchronous transfer mode(ATM) is used to carryservice data by encoding them into ATM cells fo… | ||
| 1.3.6.1.2.1.10.4.50.1.1 | NodeoptixAtmImaObject | |||
| 1.3.6.1.2.1.10.4.50.1.1.1 | ScalaroptixAtmOamCnCodeOne | read-write | current | This object indicates the first four bytes of the ATM OAM loopback location identifier (LLID), composed of country code and network code. |
| 1.3.6.1.2.1.10.4.50.1.1.2 | ScalaroptixAtmOamCnCodeTwo | read-write | current | This object indicates the second four bytes of the ATM OAM LLID. |
| 1.3.6.1.2.1.10.4.50.1.1.3 | ScalaroptixAtmOamCnCodeThree | read-write | current | This object indicates the third four bytes of the ATM OAM LLID. |
| 1.3.6.1.2.1.10.4.50.1.1.4 | ScalaroptixAtmOamCnCodeFour | read-write | current | This object indicates the fourth four bytes of the ATM OAM LLID. |
| 1.3.6.1.2.1.10.4.50.1.1.5 | ScalaroptixAtmOamInsertEnable | read-write | current | This object indicates the enable/disable status of inserting ATM OAM cells. 0: disable 1: enable |
| 1.3.6.1.2.1.10.4.50.1.1.6 | TableoptixUnitoUniAtmSrvTable | not-accessible | current | This table implements the configurations of the local private ATM line service, which is a private line service transmitted between two UNIson the same deivce,… |
| 1.3.6.1.2.1.10.4.50.1.1.6.1 | RowoptixUnitoUniAtmSrvEntry | not-accessible | current | This entry indicates the local ATM private line parameter table. |
| 1.3.6.1.2.1.10.4.50.1.1.6.1.1 | ColumnoptixUnitoUniAtmSrvIndex | not-accessible | current | This object indicates the service index. |
| 1.3.6.1.2.1.10.4.50.1.1.6.1.2 | ColumnoptixUnitoUniAtmFirstUniId | not-accessible | current | This object indicates the first V-UNI ID of the service. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.6.1.3 | ColumnoptixUnitoUniAtmSecondUniId | not-accessible | current | This object indicates the second V-UNI ID of the service. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.6.1.4 | ColumnoptixUnitoUniAtmSrvId | read-create | current | This object indicates the service ID. |
| 1.3.6.1.2.1.10.4.50.1.1.6.1.5 | ColumnoptixUnitoUniAtmSrvName | read-create | current | This object indicates the service name, which is a character string in 64 bytes. |
| 1.3.6.1.2.1.10.4.50.1.1.6.1.6 | ColumnoptixUnitoUniAtmFirstUniBid | read-create | current | This object indicates the first V-UNI slot ID of the service. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.6.1.7 | ColumnoptixUnitoUniAtmFirstUniSubBid | read-create | current | This object indicates the first V-UNI subboard ID of the service. Value range: 1 to 255 |
| 1.3.6.1.2.1.10.4.50.1.1.6.1.8 | ColumnoptixUnitoUniAtmFirstUniPortId | read-create | current | This object indicates the first V-UNI port number of the service. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.6.1.9 | ColumnoptixUnitoUniFirstUniVpiVciNum | read-create | current | This object indicates the number of VPIs/VCIs of the first service V-UNI.Value range: 1 to 255. |
| 1.3.6.1.2.1.10.4.50.1.1.6.1.10 | ColumnoptixUnitoUniFirstUniVpilist | read-create | current | This object indicates the VPI list of the first V-UNI. Each VPI occupies 4 bytes. |
| 1.3.6.1.2.1.10.4.50.1.1.6.1.11 | ColumnoptixUnitoUniFirstUniVcilist | read-create | current | This object indicates the VCI list of the first V-UNI. Each VCI occupies 4 bytes. |
| 1.3.6.1.2.1.10.4.50.1.1.6.1.12 | ColumnoptixUnitoUniAtmSecondUniBid | read-create | current | This object indicates the second V-UNI slot ID of the service. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.6.1.13 | ColumnoptixUnitoUniAtmSecondUniSubBid | read-create | current | This object indicates the second V-UNI subboard ID of the service. Value range: 1 to 255 |
| 1.3.6.1.2.1.10.4.50.1.1.6.1.14 | ColumnoptixUnitoUniAtmSecondUniPortId | read-create | current | This object indicates the second V-UNI port number of the service. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.6.1.15 | ColumnoptixUnitoUniSecondUniVpiVciNum | read-create | current | This object indicates the number of VLANs of the second V-UNI (0: VLAN number of the port). Value range: 1 to 4094 |
| 1.3.6.1.2.1.10.4.50.1.1.6.1.16 | ColumnoptixUnitoUniSecondUniVpilist | read-create | current | This object indicates the VPI list of the second V-UNI. Each VPI occupies 4 bytes. |
| 1.3.6.1.2.1.10.4.50.1.1.6.1.17 | ColumnoptixUnitoUniSecondUniVcilist | read-create | current | This object indicates the VCI list of the second V-UNI. Each VCI occupies 4 bytes. |
| 1.3.6.1.2.1.10.4.50.1.1.6.1.255 | ColumnoptixUnitoUniAtmSrvRowStatus | read-create | current | This object indicates the row status. 1: active,4: createAndGo,6: destroy |
| 1.3.6.1.2.1.10.4.50.1.1.7 | TableoptixUnitoNniAtmSrvTable | not-accessible | current | This table implements the configurations of the remote ATM private line service, which is a private line service transmitted between a Layer 2 UNI and a PW NNI… |
| 1.3.6.1.2.1.10.4.50.1.1.7.1 | RowoptixUnitoNniAtmSrvEntry | not-accessible | current | This entry indicates the remote ATM private line parameter table. |
| 1.3.6.1.2.1.10.4.50.1.1.7.1.1 | ColumnoptixUnitoNniAtmSrvIndex | not-accessible | current | This object indicates the service index. |
| 1.3.6.1.2.1.10.4.50.1.1.7.1.2 | ColumnoptixUnitoNniAtmSrvUniId | not-accessible | current | This object indicates the service V-UNI ID. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.7.1.3 | ColumnoptixUnitoNniAtmSrvNniId | not-accessible | current | This object indicates the service V-NNI ID. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.7.1.4 | ColumnoptixUnitoNniAtmSrvId | read-create | current | This object indicates the service ID. |
| 1.3.6.1.2.1.10.4.50.1.1.7.1.5 | ColumnoptixUnitoNniAtmSrvName | read-create | current | This object indicates the service name, which is a character string in 64 bytes. |
| 1.3.6.1.2.1.10.4.50.1.1.7.1.6 | ColumnoptixUnitoNniAtmSrvUniBid | read-create | current | This object indicates the slot ID of the service V-UNI. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.7.1.7 | ColumnoptixUnitoNniAtmSrvUniSubBid | read-create | current | This object indicates the subboard ID of the service V-UNI. Value range: 1 to 255 |
| 1.3.6.1.2.1.10.4.50.1.1.7.1.8 | ColumnoptixUnitoNniAtmSrvUniPortId | read-create | current | This object indicates the port number of the service V-UNI. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.7.1.9 | ColumnoptixUnitoNniAtmSrvUniVpiVciNum | read-create | current | This object indicates the number of VPIs/VCIs of the first service V-UNI. Valid values:1-255. |
| 1.3.6.1.2.1.10.4.50.1.1.7.1.10 | ColumnoptixUnitoNniAtmSrvUniVpilist | read-create | current | This object indicates the VPI list of the service V-UNI. Each VPI occupies 4 bytes. |
| 1.3.6.1.2.1.10.4.50.1.1.7.1.11 | ColumnoptixUnitoNniAtmSrvUniVcilist | read-create | current | This object indicates the VCI list of the service V-UNI. Each VCI occupies 4 bytes. |
| 1.3.6.1.2.1.10.4.50.1.1.7.1.12 | ColumnoptixUnitoNniAtmSrvNniPwIndex | read-create | current | This object indicates the PW index carried by the NNI. |
| 1.3.6.1.2.1.10.4.50.1.1.7.1.255 | ColumnoptixUnitoNniAtmSrvRowStatus | read-create | current | This object indicates the row status. 1: active,4: createAndGo,6: destroy |
| 1.3.6.1.2.1.10.4.50.1.1.8 | TableoptixAtmAggregateTable | not-accessible | current | This table implements the configurations of the ATM aggregate services, which are transmitted between multiple Layer 2 UNIs and one PW NNI, passing through the… |
| 1.3.6.1.2.1.10.4.50.1.1.8.1 | RowoptixAtmAggregateEntry | not-accessible | current | This entry indicates the configuration table of the ATM-AGGR service. |
| 1.3.6.1.2.1.10.4.50.1.1.8.1.1 | ColumnoptixAtmAggregateIndex | not-accessible | current | This object indicates the service index. |
| 1.3.6.1.2.1.10.4.50.1.1.8.1.2 | ColumnoptixAtmAggregateId | read-create | current | This object indicates the service ID. |
| 1.3.6.1.2.1.10.4.50.1.1.8.1.3 | ColumnoptixAtmAggregateName | read-create | current | This object indicates the service name, which is a character string in 64 bytes. |
| 1.3.6.1.2.1.10.4.50.1.1.8.1.255 | ColumnoptixAtmAggregateRowStatus | read-create | current | This object indicates the row status. 1: active,4: createAndGo,6: destroy |
| 1.3.6.1.2.1.10.4.50.1.1.9 | TableoptixAtmAggregateUniTable | not-accessible | current | This table implements the configurations of the ATM convergence services carried through Layer 2 logical UNIs.These configurations include the logical UNI role… |
| 1.3.6.1.2.1.10.4.50.1.1.9.1 | RowoptixAtmAggregateUniEntry | not-accessible | current | This entry indicates the configuration table of the logical UNIs for the ATM-AGGR service. |
| 1.3.6.1.2.1.10.4.50.1.1.9.1.1 | ColumnoptixAtmAggregateUniId | not-accessible | current | This object indicates the service V-UNI ID. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.9.1.2 | ColumnoptixAtmAggregateUniRole | read-create | current | This object indicates the role of the logical interface. 1: root 2: leaf |
| 1.3.6.1.2.1.10.4.50.1.1.9.1.3 | ColumnoptixAtmAggregateUniBid | read-create | current | This object indicates the slot ID of the service V-UNI. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.9.1.4 | ColumnoptixAtmAggregateUniSubBid | read-create | current | This object indicates the subboard ID of the service V-UNI. Value range: 1 to 255 |
| 1.3.6.1.2.1.10.4.50.1.1.9.1.5 | ColumnoptixAtmAggregateUniPortId | read-create | current | This object indicates the port number of the service V-UNI. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.9.1.6 | ColumnoptixAtmAggregateUniVpiVciNum | read-create | current | This object indicates the number of VPIs/VCIs of the service V-UNI. Valid values: 1-255. |
| 1.3.6.1.2.1.10.4.50.1.1.9.1.7 | ColumnoptixAtmAggregateUniVpilist | read-create | current | This object indicates the VPI list of the service V-UNI. Each VPI occupies 4 bytes. |
| 1.3.6.1.2.1.10.4.50.1.1.9.1.8 | ColumnoptixAtmAggregateUniVcilist | read-create | current | This object indicates the VCI list of the service V-UNI. Each VCI occupies 4 bytes. |
| 1.3.6.1.2.1.10.4.50.1.1.9.1.255 | ColumnoptixAtmAggregateUniRowStatus | read-create | current | This object indicates the row status. 1: active,4: createAndGo,6: destroy |
| 1.3.6.1.2.1.10.4.50.1.1.10 | TableoptixAtmAggregateNniTable | not-accessible | current | This table implements the configurations of the ATM aggregate services carried through logical PW NNIs. These configurations include the logical NNI role and P… |
| 1.3.6.1.2.1.10.4.50.1.1.10.1 | RowoptixAtmAggregateNniEntry | not-accessible | current | This entry indicates the configuration table of the NNIs for the ATM-AGGR service. |
| 1.3.6.1.2.1.10.4.50.1.1.10.1.1 | ColumnoptixAtmAggregateNniId | not-accessible | current | This object indicates the service V-NNI ID. |
| 1.3.6.1.2.1.10.4.50.1.1.10.1.2 | ColumnoptixAtmAggregateNniRole | read-create | current | This object indicates the role of the logical interface. 1: root 2: leaf |
| 1.3.6.1.2.1.10.4.50.1.1.10.1.3 | ColumnoptixAtmAggregateNniPwIndex | read-create | current | This object indicates the PW index carried by the NNI. |
| 1.3.6.1.2.1.10.4.50.1.1.10.1.255 | ColumnoptixAtmAggregateNniRowStatus | read-create | current | This object indicates the row status. 1: active,4: createAndGo,6: destroy |
| 1.3.6.1.2.1.10.4.50.1.1.11 | TableoptixAtmConnectTable | not-accessible | current | This table implements the configurations of ATM connections which create VPI and VCI exchanging paths between the ingress and egress of the ATM service.These c… |
| 1.3.6.1.2.1.10.4.50.1.1.11.1 | RowoptixAtmConnectEntry | not-accessible | current | This entry indicates the configuration table of the ATM connections. |
| 1.3.6.1.2.1.10.4.50.1.1.11.1.1 | ColumnoptixAtmSrvIndex | not-accessible | current | This object indicates the ATM service index. |
| 1.3.6.1.2.1.10.4.50.1.1.11.1.2 | ColumnoptixAtmConnectId | not-accessible | current | This object indicates the ATM connection ID. |
| 1.3.6.1.2.1.10.4.50.1.1.11.1.3 | ColumnoptixAtmConnectName | read-create | current | This object indicates the ATM connection name, which is a character string in a maximum of 64 bytes. |
| 1.3.6.1.2.1.10.4.50.1.1.11.1.4 | ColumnoptixAtmConnectInPortType | read-create | current | This object indicates the logical input interface type. 0: vuni 1: vnni |
| 1.3.6.1.2.1.10.4.50.1.1.11.1.5 | ColumnoptixAtmConnectInPortId | read-create | current | This object indicates the logical input port number. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.11.1.6 | ColumnoptixAtmConnectInVpi | read-create | current | This object indicates the input VPI. |
| 1.3.6.1.2.1.10.4.50.1.1.11.1.7 | ColumnoptixAtmConnectInVci | read-create | current | This object indicates the input VCI. |
| 1.3.6.1.2.1.10.4.50.1.1.11.1.8 | ColumnoptixAtmConnectOutPortType | read-create | current | This object indicates the logical output interface type. 0: vuni 1: vnni |
| 1.3.6.1.2.1.10.4.50.1.1.11.1.9 | ColumnoptixAtmConnectOutPortId | read-create | current | This object indicates the logical output port number. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.11.1.10 | ColumnoptixAtmConnectOutVpi | read-create | current | This object indicates the output VPI. |
| 1.3.6.1.2.1.10.4.50.1.1.11.1.11 | ColumnoptixAtmConnectOutVci | read-create | current | This object indicates the output VCI. |
| 1.3.6.1.2.1.10.4.50.1.1.11.1.12 | ColumnoptixAtmConnectUpPolicyId | read-create | current | This object indicates the upstream ATM policy ID. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.11.1.13 | ColumnoptixAtmConnectDownPolicyId | read-create | current | This object indicates the downstream ATM policy ID. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.11.1.14 | ColumnoptixAtmConnectDir | read-create | current | This object indicates the ATM connection direction. |
| 1.3.6.1.2.1.10.4.50.1.1.11.1.15 | ColumnoptixAtmConnectSegend | read-create | current | This object indicates the ATM connection segment type. {none(0),seg(1),end(2),segend(3)} |
| 1.3.6.1.2.1.10.4.50.1.1.11.1.16 | ColumnoptixAtmConnectrllid | read-create | current | This object indicates the LLID of the ATM connection. |
| 1.3.6.1.2.1.10.4.50.1.1.11.1.255 | ColumnoptixAtmConnectRowStatus | read-create | current | This object indicates the row status. 1: active,4: createAndGo,6: destroy |
| 1.3.6.1.2.1.10.4.50.1.1.12 | TableoptixAtmOamTable | not-accessible | current | This table implements the configurations of the ATM OAM, which is an OAM function for ATM services in the end-to-end mode. This function supports the quality d… |
| 1.3.6.1.2.1.10.4.50.1.1.12.1 | RowoptixAtmOamEntry | not-accessible | current | This entry indicates the configuration table of the ATM OAM. |
| 1.3.6.1.2.1.10.4.50.1.1.12.1.1 | ColumnoptixAtmOamDirection | not-accessible | current | This object indicates the ATM OAM direction. 1: fwd 2: bwd |
| 1.3.6.1.2.1.10.4.50.1.1.12.1.2 | ColumnoptixAtmOamSegend | read-write | current | This object indicates the end and segment attribute of the connection point. 0: none 1: seg 2: end 3: segend |
| 1.3.6.1.2.1.10.4.50.1.1.12.1.3 | ColumnoptixAtmOamCcSegend | read-write | current | This object indicates the CC end and segment attribute. 1: seg 2: end |
| 1.3.6.1.2.1.10.4.50.1.1.12.1.4 | ColumnoptixAtmOamCcState | read-write | current | This object indicates the CC activation flag. 0: clear 1: source 2: sink 3: srcsink |
| 1.3.6.1.2.1.10.4.50.1.1.13 | TableoptixAtmTrunkAttrTable | not-accessible | current | This table implements the configurations of ATM Trunk attributes, which multiplex multiple low-speed links to one logical high-speed link. These attributes inc… |
| 1.3.6.1.2.1.10.4.50.1.1.13.1 | RowoptixAtmTrunkAttrEntry | not-accessible | current | This entry indicates the configuration table of the ATM Trunk attributes. |
| 1.3.6.1.2.1.10.4.50.1.1.13.1.1 | ColumnoptixAtmTrunkAttrBid | not-accessible | current | This object indicates the slot ID of the ATM Trunk. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.13.1.2 | ColumnoptixAtmTrunkAttrSubBid | not-accessible | current | This object indicates the subboard ID of the ATM Trunk. Value range: 1 to 255 |
| 1.3.6.1.2.1.10.4.50.1.1.13.1.3 | ColumnoptixAtmTrunkAttrTrunkId | not-accessible | current | This object indicates the ATM Trunk ID. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.13.1.4 | ColumnoptixAtmTrunkAttrImaEnable | read-write | current | This object indicates whether the IMA is enabled. 1: enable 0: disable |
| 1.3.6.1.2.1.10.4.50.1.1.13.1.5 | ColumnoptixAtmTrunkAttrVersion | read-write | current | This object indicates the IMA protocol version. 0: version 1.0 1: version 1.1 |
| 1.3.6.1.2.1.10.4.50.1.1.13.1.6 | ColumnoptixAtmTrunkAttrFrmlenth | read-write | current | This object indicates the frame length at the IMA transmit end. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.13.1.7 | ColumnoptixAtmTrunkAttrSymmod | read-write | current | This object indicates the symmetry mode. 0: symcfgandop 1: symcfgandasymop 2: asymcfgandasymop |
| 1.3.6.1.2.1.10.4.50.1.1.13.1.8 | ColumnoptixAtmTrunkAttrMaxDelaytime | read-write | current | This object indicates the maximum delay time between links. Value range: 1 to 120 |
| 1.3.6.1.2.1.10.4.50.1.1.13.1.9 | ColumnoptixAtmTrunkAttrTxMinLinkNum | read-write | current | This object indicates the minimum number of the TX active links. Value range: 1 to 32 |
| 1.3.6.1.2.1.10.4.50.1.1.13.1.10 | ColumnoptixAtmTrunkAttrRxMinLinkNum | read-write | current | This object indicates the minimum number of the RX active links. Value range: 1 to 32 |
| 1.3.6.1.2.1.10.4.50.1.1.13.1.11 | ColumnoptixAtmTrunkAttrClockMode | read-write | current | This object indicates the clock mode. 0: ctc 1: itc |
| 1.3.6.1.2.1.10.4.50.1.1.13.1.12 | ColumnoptixAtmTrunkAttrReStart | read-write | current | This object indicates that the IMA protocol is to be restarted. |
| 1.3.6.1.2.1.10.4.50.1.1.14 | TableoptixAtmTrunkMbrTable | not-accessible | current | This table implements the configurations of ATM Trunk members. These configurations include the slot ID, subboard ID, port number, and high-/low-order channel … |
| 1.3.6.1.2.1.10.4.50.1.1.14.1 | RowoptixAtmTrunkMbrEntry | not-accessible | current | This entry is used to configure ATM Trunk members. |
| 1.3.6.1.2.1.10.4.50.1.1.14.1.1 | ColumnoptixAtmTrunkMbrImaBid | not-accessible | current | This object indicates the slot ID of the ATM Trunk. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.14.1.2 | ColumnoptixAtmTrunkMbrImaSubBid | not-accessible | current | This object indicates the subboard ID of the ATM Trunk. Value range: 1 to 255 |
| 1.3.6.1.2.1.10.4.50.1.1.14.1.3 | ColumnoptixAtmTrunkMbrImaTrunkId | not-accessible | current | This object indicates the ATM Trunk ID. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.14.1.4 | ColumnoptixAtmTrunkMbrBid | not-accessible | current | This object indicates the slot ID of the ATM Trunk member. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.14.1.5 | ColumnoptixAtmTrunkMbrSubBid | not-accessible | current | This object indicates the subboard ID of the ATM Trunk member. Value range: 1 to 255 |
| 1.3.6.1.2.1.10.4.50.1.1.14.1.6 | ColumnoptixAtmTrunkMbrPortId | not-accessible | current | This object indicates the port number of the ATM Trunk member. Value range: 1 to 255 |
| 1.3.6.1.2.1.10.4.50.1.1.14.1.7 | ColumnoptixAtmTrunkMbrHpPath | not-accessible | current | This object indicates the high-order channel ID of the ATM Trunk member. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.14.1.8 | ColumnoptixAtmTrunkMbrLpPath | not-accessible | current | This object indicates the low-order channel ID of the ATM Trunk member. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.14.1.255 | ColumnoptixAtmTrunkMbrRowStatus | read-create | current | This object indicates the row status. 1: active,4: createAndGo,6: destroy |
| 1.3.6.1.2.1.10.4.50.1.1.15 | TableoptixAtmTrunkStatusTable | not-accessible | current | This table implements thestatus queryof ATM Trunk members. The queried states include the status of remote/local groups, rates of receiving and transmitting ce… |
| 1.3.6.1.2.1.10.4.50.1.1.15.1 | RowoptixAtmTrunkStatusEntry | not-accessible | current | This entry is used to query the ATM Trunk status. |
| 1.3.6.1.2.1.10.4.50.1.1.15.1.1 | ColumnoptixAtmTrunkStatusBid | not-accessible | current | This object indicates the slot ID of the ATM Trunk. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.15.1.2 | ColumnoptixAtmTrunkStatusSubBid | not-accessible | current | This object indicates the subboard ID of the ATM Trunk. Value range: 1 to 255 |
| 1.3.6.1.2.1.10.4.50.1.1.15.1.3 | ColumnoptixAtmTrunkStatusTrunkId | not-accessible | current | This object indicates the ATM Trunk ID. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.15.1.4 | ColumnoptixAtmTrunkLocalGroupStatus | read-only | current | This object indicates the status of the local group state machine. |
| 1.3.6.1.2.1.10.4.50.1.1.15.1.5 | ColumnoptixAtmTrunkPeerGroupStatus | read-only | current | This object indicates the status of the remote group state machine. 1: noconfigured 2: startup 3: startupack 4: configaborted 5: configabortedsym 6: configabor… |
| 1.3.6.1.2.1.10.4.50.1.1.15.1.6 | ColumnoptixAtmTrunkStatusTxCellSpeed | read-only | current | This object indicates the rate of transmitting cells. Unit: cells/s |
| 1.3.6.1.2.1.10.4.50.1.1.15.1.7 | ColumnoptixAtmTrunkStatusRxeCellSpeed | read-only | current | This object indicates the rate of receiving cells. Unit: cells/s |
| 1.3.6.1.2.1.10.4.50.1.1.15.1.8 | ColumnoptixAtmTrunkStatusTxLinksCfg | read-only | current | This object indicates the configured number of transmit links. |
| 1.3.6.1.2.1.10.4.50.1.1.15.1.9 | ColumnoptixAtmTrunkStatusRxLinksCfg | read-only | current | This object indicates the configured number of receive links. |
| 1.3.6.1.2.1.10.4.50.1.1.15.1.10 | ColumnoptixAtmTrunkStatusTxAckLinks | read-only | current | This object indicates the activated number of transmit links. |
| 1.3.6.1.2.1.10.4.50.1.1.15.1.11 | ColumnoptixAtmTrunkStatusRxAckLinks | read-only | current | This object indicates the activated number of receive links. |
| 1.3.6.1.2.1.10.4.50.1.1.16 | TableoptixImaLinkStatusTable | not-accessible | current | This table implements the status query of IMA link members in the ATM Trunk. These information includes the slot ID, subboard ID, port number, high-/low-order … |
| 1.3.6.1.2.1.10.4.50.1.1.16.1 | RowoptixImaLinkStatusEntry | not-accessible | current | This entry is used to query the IMA link status. |
| 1.3.6.1.2.1.10.4.50.1.1.16.1.1 | ColumnoptixImaLinkStatusImaBid | not-accessible | current | This object indicates the slot ID of the ATM Trunk. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.16.1.2 | ColumnoptixImaLinkStatusImaSubBid | not-accessible | current | This object indicates the subboard ID of the ATM Trunk. Value range: 1 to 255 |
| 1.3.6.1.2.1.10.4.50.1.1.16.1.3 | ColumnoptixImaLinkStatusImaTrunkId | not-accessible | current | This leaf indicates the ATM Trunk ID. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.16.1.4 | ColumnoptixImaLinkStatusBid | read-only | current | This object indicates the slot ID of the ATM Trunk member. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.16.1.5 | ColumnoptixImaLinkStatusSubBid | read-only | current | This object indicates the subboard ID of the ATM Trunk member. Value range: 1 to 255 |
| 1.3.6.1.2.1.10.4.50.1.1.16.1.6 | ColumnoptixImaLinkStatusPortId | read-only | current | This object indicates the port number of the ATM Trunk member. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.16.1.7 | ColumnoptixImaLinkStatusHpPath | read-only | current | This object indicates the high-order channel ID of the ATM Trunk member. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.16.1.8 | ColumnoptixImaLinkStatusLpPath | read-only | current | This object indicates the low-order channel ID of the ATM Trunk member. Value range: 1 to 65535 |
| 1.3.6.1.2.1.10.4.50.1.1.16.1.9 | ColumnoptixImaLinkStatusDelayStatus | read-only | current | This object indicates the delay status of the IMA link. 0: unknown delay 1: valid delay 2: invalid delay |
| 1.3.6.1.2.1.10.4.50.1.1.16.1.10 | ColumnoptixImaLinkStatusLocalRxStatus | read-only | current | This object indicates the status of receive IMA links at the local end. 0xff: invalid status 1: notingroup 2: nocause 3: fault 4: misconnection 5: inhibit 6: f… |
| 1.3.6.1.2.1.10.4.50.1.1.16.1.11 | ColumnoptixImaLinkStatusLocalTxStatus | read-only | current | This object indicates the status of transmit IMA links at the local end. 0xff: invalid status 1: notingroup 2: nocause 3: fault 4: misconnection 5: inhibit 6: … |
| 1.3.6.1.2.1.10.4.50.1.1.16.1.12 | ColumnoptixImaLinkStatusPeerRxStatus | read-only | current | This object indicates the status of receive IMA links at the remote end. 0xff: invalid status 1: notingroup 2: nocause 3: fault 4: misconnection 5: inhibit 6: … |
| 1.3.6.1.2.1.10.4.50.1.1.16.1.13 | ColumnoptixImaLinkStatusPeerTxStatus | read-only | current | This object indicates the status of transmit IMA links at the remote end. 0xff: invalid status 1: notingroup 2: nocause 3: fault 4: misconnection 5: inhibit 6:… |
| 1.3.6.1.2.1.10.4.50.1.2 | NodeoptixAtmImaTrap | |||
| 1.3.6.1.2.1.10.4.50.1.2.1 | NodeoptixAtmImaMember | |||
| 1.3.6.1.2.1.10.4.50.1.2.1.1 | ScalaroptixAtmTrunkStatusEvtBid | accessible-for-notify | current | This object indicates the slot ID of the ATM Trunk. |
| 1.3.6.1.2.1.10.4.50.1.2.1.2 | ScalaroptixAtmTrunkStatusEvtSubBid | accessible-for-notify | current | This object indicates the subboard ID of the ATM Trunk. |
| 1.3.6.1.2.1.10.4.50.1.2.1.3 | ScalaroptixAtmTrunkStatusEvtTrunkId | accessible-for-notify | current | This object indicates the ATM Trunk ID. |
| 1.3.6.1.2.1.10.4.50.1.2.1.4 | ScalaroptixAtmTrunkEvtLocalGroupStatus | accessible-for-notify | current | This object indicates the status of the local group state machine. |
| 1.3.6.1.2.1.10.4.50.1.2.1.5 | ScalaroptixAtmTrunkEvtPeerGroupStatus | accessible-for-notify | current | This object indicates the status of the remote group state machine. |
| 1.3.6.1.2.1.10.4.50.1.2.1.6 | ScalaroptixAtmTrunkEvtTxCellSpeed | accessible-for-notify | current | This object indicates the rate of transmitting cells. Unit: cells/s |
| 1.3.6.1.2.1.10.4.50.1.2.1.7 | ScalaroptixAtmTrunkEvtRxeCellSpeed | accessible-for-notify | current | This object indicates the rate of receiving cells. Unit: cells/s |
| 1.3.6.1.2.1.10.4.50.1.2.1.8 | ScalaroptixAtmTrunkEvtTxLinksCfg | accessible-for-notify | current | This object indicates the configured number of transmit links. |
| 1.3.6.1.2.1.10.4.50.1.2.1.9 | ScalaroptixAtmTrunkEvtRxLinksCfg | accessible-for-notify | current | This object indicates the configured number of receive links. |
| 1.3.6.1.2.1.10.4.50.1.2.1.10 | ScalaroptixAtmTrunkStatusEvtTxAckLinks | accessible-for-notify | current | This object indicates the activated number of transmitted links. |
| 1.3.6.1.2.1.10.4.50.1.2.1.11 | ScalaroptixAtmTrunkStatusEvtRxAckLinks | accessible-for-notify | current | This object indicates the activated number of receive links. |
| 1.3.6.1.2.1.10.4.50.1.2.1.12 | ScalaroptixImaLinkStatusTrapImaBid | accessible-for-notify | current | This object indicates the slot ID of the ATM Trunk. |
| 1.3.6.1.2.1.10.4.50.1.2.1.13 | ScalaroptixImaLinkStatusTrapImaSubBid | accessible-for-notify | current | This object indicates the subboard ID of the ATM Trunk. |
| 1.3.6.1.2.1.10.4.50.1.2.1.14 | ScalaroptixImaLinkStatusTrapImaTrunkId | accessible-for-notify | current | This object indicates the ATM Trunk ID. |
| 1.3.6.1.2.1.10.4.50.1.2.1.15 | ScalaroptixImaLinkStatusTrapBid | accessible-for-notify | current | This object indicates the slot ID of the ATM Trunk member. |
| 1.3.6.1.2.1.10.4.50.1.2.1.16 | ScalaroptixImaLinkStatusTrapSubBid | accessible-for-notify | current | This object indicates the subboard ID of the ATM Trunk member. |
| 1.3.6.1.2.1.10.4.50.1.2.1.17 | ScalaroptixImaLinkStatusTrapPortId | accessible-for-notify | current | This object indicates the port number of the ATM Trunk member. |
| 1.3.6.1.2.1.10.4.50.1.2.1.18 | ScalaroptixImaLinkStatusTrapHpPath | accessible-for-notify | current | This object indicates the high-order channel ID of the ATM Trunk member. |
| 1.3.6.1.2.1.10.4.50.1.2.1.19 | ScalaroptixImaLinkStatusTrapLpPath | accessible-for-notify | current | This object indicates the low-order channel ID of the ATM Trunk member. |
| 1.3.6.1.2.1.10.4.50.1.2.1.20 | ScalaroptixImaLinkTrapDelayStatus | accessible-for-notify | current | This object indicates the delay status of the IMA link. 0: unknown delay 1: valid delay 2: invalid delay |
| 1.3.6.1.2.1.10.4.50.1.2.1.21 | ScalaroptixImaLinkTrapLocalRxStatus | accessible-for-notify | current | This object indicates the status of receive IMA links at the local end. 0xff: invalid status |
| 1.3.6.1.2.1.10.4.50.1.2.1.22 | ScalaroptixImaLinkTrapLocalTxStatus | accessible-for-notify | current | This object indicates the status of transmit IMA links at the local end. 0xff: invalid status |
| 1.3.6.1.2.1.10.4.50.1.2.1.23 | ScalaroptixImaLinkTrapPeerRxStatus | accessible-for-notify | current | This object indicates the status of receive IMA links at the remote end. 0xff: invalid status |
| 1.3.6.1.2.1.10.4.50.1.2.1.24 | ScalaroptixImaLinkTrapPeerTxStatus | accessible-for-notify | current | This object indicates the status of transmit IMA links at the remote end. 0xff: invalid status |
| 1.3.6.1.2.1.10.4.50.1.2.1.25 | ScalaroptixAtmLbServiceIndex | accessible-for-notify | current | This object indicates the ATM service index. |
| 1.3.6.1.2.1.10.4.50.1.2.1.26 | ScalaroptixAtmLbConnectionID | accessible-for-notify | current | This object indicates the ID of the ATM loopback. |
| 1.3.6.1.2.1.10.4.50.1.2.1.27 | ScalaroptixAtmLbDir | accessible-for-notify | current | This object indicates the direction of the ATM loopback. |
| 1.3.6.1.2.1.10.4.50.1.2.1.28 | ScalaroptixAtmLbSegEndType | accessible-for-notify | current | This object indicates the segment or end type. |
| 1.3.6.1.2.1.10.4.50.1.2.1.29 | ScalaroptixAtmLbLLID | accessible-for-notify | current | This object indicates the loopback LLID. |
| 1.3.6.1.2.1.10.4.50.1.2.1.30 | ScalaroptixAtmLbResult | accessible-for-notify | current | This object indicates the success or failure. |
| 1.3.6.1.2.1.10.4.50.1.2.2 | NodeoptixAtmImaTrapReport | |||
| 1.3.6.1.2.1.10.4.50.1.2.2.1 | NotificationoptixAtmTrunkStatusTrap | current | This object is used to report ATM Trunk status events when the number of link members of the IMA group increases/decreases, the negotiation status changes, and… | |
| 1.3.6.1.2.1.10.4.50.1.2.2.2 | NotificationoptixImaLinkStatusTrap | current | This object is used to report IMA link status events when the delay of member links in the IMA group, or the receive/transmit status of remote/local IMA links … | |
| 1.3.6.1.2.1.10.4.50.1.2.2.3 | NotificationoptixAtmLbTrap | current | This object is used to report ATM loopback status events. |