OPTIX-EFMOAM-MIB
27 objects
This mib specifies the 802.3ah configuration information of device
Imported Objects
| OPTIX-BOARD-MANAGE-MIB | optixLogBoardId optixLogSubCardId |
| OPTIX-OID-MIB | optixProvisionPtn |
| OPTIX-PORT-MANAGE-MIB | optixPortId |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.50.17 | IdentityoptixEfmoam | This mib specifies the 802.3ah configuration information of device | ||
| 1.3.6.1.2.1.10.4.50.17.1 | NodeoptixEfmoamGroup | |||
| 1.3.6.1.2.1.10.4.50.17.1.1 | TableoptixEfmoamTable | not-accessible | current | This table describes the basic configuration information of the Layer 2 802.3ah protocol. |
| 1.3.6.1.2.1.10.4.50.17.1.1.1 | RowoptixEfmoamEntry | not-accessible | current | This entry describes the basic configuration information of the Layer 2 802.3ah protocol. |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.1 | ColumnoptixEfmoamEnable | read-write | current | This object indicates the enable status of the 802.3ah protocol. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.2 | ColumnoptixEfmoamMode | read-write | current | This object indicates the OAM modeof the 802.3ah protocol. 1: passive, 2: active |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.3 | ColumnoptixEfmoamRsplbEn | read-write | current | This object indicates the capability of the 802.3ah protocol to respond to the remote loopback. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.4 | ColumnoptixEfmoamLinkevtEn | read-write | current | This object indicates whether link event reporting is enabled for the 802.3ah protocol. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.5 | ColumnoptixEfmoamRMode | read-only | current | This object indicates the unidirectional operability of the 802.3ah protocol. 1: passive, 2: active |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.6 | ColumnoptixEfmoamMaxPduSize | read-only | current | This object indicates the maximum OAM packet length of the 802.3ah protocol. Value range: 0 to 65535. |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.7 | ColumnoptixEfmoamLoopStatus | read-only | current | This object indicates the loopback status of the 802.3ah protocol. 0: notLb, 1: lclInitiate, 2: lclRsp |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.8 | ColumnoptixEfmoamSendStatus | read-only | current | This object indicates the transmit status of the 802.3ah protocol. 1: fwd, 2: lb, 3: discard |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.9 | ColumnoptixEfmoamReceiveStatus | read-only | current | This object indicates the receive status of the 802.3ah protocol. 1: fwd, 2: lb, 3: discard |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.10 | ColumnoptixEfmoamLocalDiscoverState | read-only | current | This object indicates the local discovery status of the 802.3ah protocol. 1: fault, 2: activeSendLocal, 3: passiveWait, 4: sendLocalRemote, 5: sendLocalRemoteO… |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.11 | ColumnoptixEfmoamRemoteDiscoverState | read-only | current | This object indicates the remote discovery status of the 802.3ah protocol. 0: unsatified, 1: unfinished, 2: finished |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.12 | ColumnoptixEfmoamErrFrmWin | read-write | current | This object indicates the timewindow for monitoring error frames for the 802.3ah protocol. Value range: 1000 to 60000 (unit: ms). The default value is 1000 and… |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.13 | ColumnoptixEfmoamErrFrmThr | read-write | current | This object indicates the threshold of monitored error frames for the 802.3ah protocol. Value range: 1 to 0xffffffff (unit: frame). The default value is 1 and … |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.14 | ColumnoptixEfmoamErrFrmPerWin | read-write | current | This object indicates the monitoring window for the periodically monitored error frames forthe 802.3ah protocol. Value range: 0 to 0xffffffff. |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.15 | ColumnoptixEfmoamErrFrmPerThr | read-write | current | This object indicates the threshold of periodically monitored error frames for the 802.3ah protocol. Value range: 0 to 0xffffffff. |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.16 | ColumnoptixEfmoamErrFrmSecWin | read-write | current | This object indicates the time range of monitored error frame seconds for the 802.3ah protocol. Value range: 10 to 900 (unit: s). The default value is 60. |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.17 | ColumnoptixEfmoamErrFrmSecThr | read-write | current | This object indicates the threshold of monitored error frame seconds for the 802.3ah protocol. Value range: 1 to 65535 (unit: s). |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.18 | ColumnoptixEfmoamErrFrmSymWin | read-write | current | This object indicates the monitoring window for monitored error frame signals for the 802.3ah protocol. Value range: 1 to 60 (unit: s). |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.19 | ColumnoptixEfmoamErrFrmSymThr | read-write | current | This object indicates the threshold of monitored error frame signals for the 802.3ah protocol. Value range: 1 to 0xffffffffffffffff. 64-bit data is in string f… |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.20 | ColumnoptixEfmoamUnidirectional | read-only | current | This object indicates the unidirectional operability of the 802.3ah protocol. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.21 | ColumnoptixEfmoamRmtlbEn | read-write | current | This object indicates the remote loop back support of the 802.3ah protocol. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.22 | ColumnoptixEfmoamRlinkevtEn | read-only | current | This object indicates the link event enable of the 802.3ah protocol. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.50.17.1.1.1.23 | ColumnoptixEfmoamRmtRsplbEn | read-only | current | This object indicates the remote capability of the 802.3ah protocol to respond to the loopback. 0: disable, 1: enable |