MIB Viewer
 MIB Viewer Desktop New

OPTIX-L2-IGMP-MIB

137 objects
This mib specifies the IGMP configuration information of device
Imported Objects
OPTIX-OID-MIBoptixProvisionPtn
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter64 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime MacAddress RowStatus
OIDNameAccessStatusDescription
1.3.6.1.2.1.10.4.50.38IdentityoptixL2IgmpThis mib specifies the IGMP configuration information of device
1.3.6.1.2.1.10.4.50.38.1NodeoptixL2IgmpGroup
1.3.6.1.2.1.10.4.50.38.1.1TableoptixL2IgmpTablenot-accessiblecurrentThis table describes the basic IGMP configurations.
1.3.6.1.2.1.10.4.50.38.1.1.1RowoptixL2IgmpEntrynot-accessiblecurrentThis entry describes the basic IGMP configurations.
1.3.6.1.2.1.10.4.50.38.1.1.1.1ColumnoptixL2IgmpServiceIndexread-onlycurrentThis object indicates the IGMP service index. Value range: 1 to 4294967294.
1.3.6.1.2.1.10.4.50.38.1.1.1.2ColumnoptixL2IgmpEnableStateread-writecurrentThis object indicates the enable status of the IGMP snooping function. 0: disable, 1: enable
1.3.6.1.2.1.10.4.50.38.1.1.1.3ColumnoptixL2IgmpRouterAgeTimeread-writecurrentThis object indicates the aging time of the multicast router port. Value range: 1 to 120 (unit: minute). The default value is 8.
1.3.6.1.2.1.10.4.50.38.1.1.1.4ColumnoptixL2IgmpMemberNoResponseTimesread-writecurrentThis object indicates the maximum no response times of the multicast member. Value range: 1 to 4. The default value is 3.
1.3.6.1.2.1.10.4.50.38.1.1.1.5ColumnoptixL2IgmpMaxGroupNumread-writecurrentThis object indicates the maximum number of available multicast groups. Value range for RTN equipment: 0 to 512.
1.3.6.1.2.1.10.4.50.38.1.1.1.6ColumnoptixL2IgmpMaxMemberNumread-writecurrentThis object indicates the maximum number of available multicast members. Value range for RTN equipment: 0 to 1024.
1.3.6.1.2.1.10.4.50.38.1.1.1.7ColumnoptixL2IgmpRealGroupNumread-onlycurrentThis object indicates the number of actually used multicast groups. Value range for RTN equipment: 0 to 512.
1.3.6.1.2.1.10.4.50.38.1.1.1.8ColumnoptixL2IgmpRealMemberNumread-onlycurrentThis object indicates the number of actually used multicast members. Value range for RTN equipment: 0 to 1024.
1.3.6.1.2.1.10.4.50.38.1.1.1.9ColumnoptixL2IgmpAlmThMinread-writecurrentThis parameter indicates the lower threshold for IGMP service alarms. The lower threshold must be smaller than the upper one. Value range: 60-100; default valu…
1.3.6.1.2.1.10.4.50.38.1.1.1.10ColumnoptixL2IgmpAlmThMaxread-writecurrentThis parameter indicates the upper threshold for IGMP service alarms. Value range: 80-100; default value: 100; unit: %
1.3.6.1.2.1.10.4.50.38.1.2TableoptixL2IgmpRouterPortTablenot-accessiblecurrentThis table describes the basic configurations of the actual multicast router port.
1.3.6.1.2.1.10.4.50.38.1.2.1RowoptixL2IgmpRouterPortEntrynot-accessiblecurrentThis entry describes the basic configurations of the actual multicast router port.
1.3.6.1.2.1.10.4.50.38.1.2.1.1ColumnoptixL2IgmpVlanIdnot-accessiblecurrentThis object indicates the VLAN ID. Value range: 0 to 4094.
1.3.6.1.2.1.10.4.50.38.1.2.1.2ColumnoptixL2IgmpRouterPortTypenot-accessiblecurrentThis object indicates the multicast router port type. 1: V-UNI, 2: V-NNI
1.3.6.1.2.1.10.4.50.38.1.2.1.3ColumnoptixL2IgmpRouterPortIdnot-accessiblecurrentThis object indicates the multicast router port ID. Value range: 0 to 65535.
1.3.6.1.2.1.10.4.50.38.1.2.1.4ColumnoptixL2IgmpRouterPortNumread-onlycurrentThis object indicates the number of multicast router ports. Value range: 0 to 65534.
1.3.6.1.2.1.10.4.50.38.1.2.1.5ColumnoptixL2IgmpRouterPortStateread-onlycurrentThis object indicates the multicast router port status. 0: dynamic, 1: static
1.3.6.1.2.1.10.4.50.38.1.2.1.6ColumnoptixL2IgmpRouterCreateTimeread-onlycurrentThis object indicates the creation time of the multicast router port.
1.3.6.1.2.1.10.4.50.38.1.2.1.7ColumnoptixL2IgmpRouterCentSecread-onlycurrentThis object indicates the multicast router port centisecond.
1.3.6.1.2.1.10.4.50.38.1.2.1.8ColumnoptixL2IgmpRouterRemainTimeread-onlycurrentThis object indicates the remaining aging time of the multicast router port. Value range: 1 to 120 (unit: minute).
1.3.6.1.2.1.10.4.50.38.1.2.1.255ColumnoptixL2IgmpRouterRowStatusread-createcurrentThis object indicates the row status of the multicast router port.
1.3.6.1.2.1.10.4.50.38.1.3TableoptixL2IgmpMemPortTablenot-accessiblecurrentThis table describes the basic configurations of actual multicast member ports.
1.3.6.1.2.1.10.4.50.38.1.3.1RowoptixL2IgmpMemPortEntrynot-accessiblecurrentThis entry describes the basic configurations of actual multicast member ports.
1.3.6.1.2.1.10.4.50.38.1.3.1.1ColumnoptixL2IgmpMemPortIdnot-accessiblecurrentThis object indicates the multicast member port number. Value range: 0 to 65535.
1.3.6.1.2.1.10.4.50.38.1.3.1.2ColumnoptixL2IgmpMemPortTypenot-accessiblecurrentThis object indicates the multicast member port type. 1: V-UNI, 2: V-NNI
1.3.6.1.2.1.10.4.50.38.1.3.1.3ColumnoptixL2IgmpMacAddressnot-accessiblecurrentThis object indicates the MAC address of the multicast member port.
1.3.6.1.2.1.10.4.50.38.1.3.1.4ColumnoptixL2IgmpGroupTyperead-onlycurrentThis object indicates the multicast group type. 0: dynamic, 1: static
1.3.6.1.2.1.10.4.50.38.1.3.1.6ColumnoptixL2IgmpMemCreateTimeread-onlycurrentThis object indicates the creation time of the multicast member port.
1.3.6.1.2.1.10.4.50.38.1.3.1.7ColumnoptixL2IgmpMemCentSecread-onlycurrentThis object indicates the multicast member port centisecond.
1.3.6.1.2.1.10.4.50.38.1.3.1.8ColumnoptixL2IgmpMemRemainTimeread-onlycurrentThis object indicates the remaining aging time of the multicast member port. Value range: 1 to 120 (unit: minute).
1.3.6.1.2.1.10.4.50.38.1.3.1.9ColumnoptixL2IgmpMemGroupNumread-onlycurrentThis object indicates the number of multicast groups. Value range for RTN equipment: 0 to 512.
1.3.6.1.2.1.10.4.50.38.1.3.1.10ColumnoptixL2IgmpMemGroupCreateTimeread-onlycurrentThis object indicates the creation time of the group.
1.3.6.1.2.1.10.4.50.38.1.3.1.11ColumnoptixL2IgmpMemGroupCentSecread-onlycurrentThis object indicates the creation millisecond of the group.
1.3.6.1.2.1.10.4.50.38.1.3.1.12ColumnoptixL2IgmpMemPortNumread-onlycurrentThis object indicates the port number of multicast groups. Value range for RTN equipment: 0 to 1024.
1.3.6.1.2.1.10.4.50.38.1.3.1.255ColumnoptixL2IgmpMemPortRowStatusread-createcurrentThis object indicates the row status ofthe multicast member port.
1.3.6.1.2.1.10.4.50.38.1.4TableoptixL2IgmpMessageTablenot-accessiblecurrentThis table describes the basic configurations of IGMP protocol packets.
1.3.6.1.2.1.10.4.50.38.1.4.1RowoptixL2IgmpMessageEntrynot-accessiblecurrentThis entry describes the basic configurations of IGMP protocol packets.
1.3.6.1.2.1.10.4.50.38.1.4.1.1ColumnopitxL2IgmpPortTypenot-accessiblecurrentThis object indicates the port type. 1:V-UNI 2:V-NNI
1.3.6.1.2.1.10.4.50.38.1.4.1.2ColumnoptixL2IgmpPortIdnot-accessiblecurrentThis object indicates the port number. Value range: 0 to 65535.
1.3.6.1.2.1.10.4.50.38.1.4.1.3ColumnoptixL2IgmpquicklvEnableStateread-writecurrentThis object indicates the enable status of the quick leave attribute of the multicast group member port. Value range: 0 to 65535.
1.3.6.1.2.1.10.4.50.38.1.4.1.4ColumnoptixL2IgmpMessageStateread-writecurrentThis object indicates the statistic status of received IGMPv1 member packets. 0: clear, 1: start, 2: stop
1.3.6.1.2.1.10.4.50.38.1.4.1.5ColumnoptixL2IgmpV1ReportNumread-onlycurrentThis object indicates the number of received IGMPv1 member report packets (64-bit).
1.3.6.1.2.1.10.4.50.38.1.4.1.6ColumnoptixL2IgmpV2ReportNumread-onlycurrentThis object indicates the number of received IGMPv2 member report packets (64-bit).
1.3.6.1.2.1.10.4.50.38.1.4.1.7ColumnoptixL2IgmpV3ReportNumread-onlycurrentThis object indicates the number of received IGMPv3 member report packets (64-bit).
1.3.6.1.2.1.10.4.50.38.1.4.1.8ColumnoptixL2IgmpLeaveMessageNumread-onlycurrentThis object indicates the number of received IGMP leave multicast grouppackets (64-bit).
1.3.6.1.2.1.10.4.50.38.1.4.1.9ColumnoptixL2IgmpV1QueryNumeread-onlycurrentThis object indicates the number of received IGMPv1 query packets (64-bit).
1.3.6.1.2.1.10.4.50.38.1.4.1.10ColumnoptixL2IgmpV2QueryNumeread-onlycurrentThis object indicates the number of received IGMPv2 query packets (64-bit).
1.3.6.1.2.1.10.4.50.38.1.4.1.11ColumnoptixL2IgmpV3QueryNumeread-onlycurrentThis object indicates the number of received IGMP V3 query packets (64-bit).
1.3.6.1.2.1.10.4.50.38.1.4.1.12ColumnoptixL2IgmpUnknowNumread-onlycurrentThis object indicates the number of unknown IGMP packets (64-bit).
1.3.6.1.2.1.10.4.50.38.1.4.1.13ColumnoptixL2IgmpLostNumread-onlycurrentThis object indicates the dropped error IGMP packets (64-bit).
1.3.6.1.2.1.10.4.50.38.1.5TableoptixL2IgmpGrpinfoTablenot-accessiblecurrentThis table describes basic configurations of the specified multicast group.
1.3.6.1.2.1.10.4.50.38.1.5.1RowoptixL2IgmpGrpinfoEntrynot-accessiblecurrentThis entry describes basic configurations of the specified multicast group.
1.3.6.1.2.1.10.4.50.38.1.5.1.1ColumnoptixL2IgmpGrpinfoMacAddressnot-accessiblecurrentThis object indicates theMAC addressof the multicast group.
1.3.6.1.2.1.10.4.50.38.1.5.1.2ColumnoptixL2IgmpGrpinfoPortTypenot-accessiblecurrentThis object indicates the port type. 1:V-UNI 2:V-NNI
1.3.6.1.2.1.10.4.50.38.1.5.1.3ColumnoptixL2IgmpGrpinfoPortIDnot-accessiblecurrentThis object indicates the port number. Value range: 0 to 65535.
1.3.6.1.2.1.10.4.50.38.1.5.1.4ColumnoptixL2IgmpGrpinfoIgmpPortTypenot-accessiblecurrentThis object indicates the port type of the multicast group. 0: routeport, 1: hostport
1.3.6.1.2.1.10.4.50.38.1.5.1.5ColumnoptixL2IgmpGrpinfoGroupTyperead-onlycurrentThis object indicates the multicast group type. 0: dynamic, 1: static
1.3.6.1.2.1.10.4.50.38.1.5.1.6ColumnoptixL2IgmpGrpinfoCreateTimeread-onlycurrentThis object indicates the creation time of the multicast group.
1.3.6.1.2.1.10.4.50.38.1.5.1.7ColumnoptixL2IgmpGrpinfoCentSecread-onlycurrentThis object indicates the multicast group centisecond.
1.3.6.1.2.1.10.4.50.38.1.5.1.8ColumnoptixL2IgmpGrpinfoPortNumread-onlycurrentThis object indicates the number of multicast groups. Value range for RTN equipment: 0 to 512.
1.3.6.1.2.1.10.4.50.38.1.5.1.9ColumnoptixL2IgmpGrpinfoPortRemainTimeread-onlycurrentThis object indicates theremaining agingtime of the multicast group. Value range: 1 to 120 (unit: minute).
1.3.6.1.2.1.10.4.50.38.1.6NodeoptixL2IgmpMacAddresEvent
1.3.6.1.2.1.10.4.50.38.1.6.1NotificationoptixL2IgmpMacAddressUseOutcurrentThis object is used to report the exhaustation event of multicast MAC address tables.
1.3.6.1.2.1.10.4.50.38.1.6.2NotificationoptixL2IgmpMacMemberUseOutcurrentThis object is used to report the exhaustation event of multicast member tables.
1.3.6.1.2.1.10.4.50.38.1.7TableoptixL2IgmpRouterPortExTablenot-accessiblecurrentThis table describes the basic configurations of the actual multicast router port.
1.3.6.1.2.1.10.4.50.38.1.7.1RowoptixL2IgmpRouterPortExEntrynot-accessiblecurrentThis entry describes the basic configurations of the actual multicast router port.
1.3.6.1.2.1.10.4.50.38.1.7.1.1ColumnoptixL2IgmpPortListNumnot-accessiblecurrentThis object indicates the Slave Port List Number.
1.3.6.1.2.1.10.4.50.38.1.7.1.2ColumnoptixL2IgmpRouterPortNumExread-onlycurrentThis object indicates the number of multicast router ports. Value range for RTN equipment: 0 to 1024.
1.3.6.1.2.1.10.4.50.38.1.7.1.3ColumnoptixL2IgmpRouterPortTypeExread-onlycurrentThis object indicates the multicast router port type. 1:V-UNI 2:V-NNI
1.3.6.1.2.1.10.4.50.38.1.7.1.4ColumnoptixL2IgmpRouterPortIdExread-onlycurrentThis object indicates the multicast router port number. Value range: 0 to 65535.
1.3.6.1.2.1.10.4.50.38.1.7.1.5ColumnoptixL2IgmpRouterPortStateExread-onlycurrentThis object indicates the multicast router port status. 0: dynamic, 1: static
1.3.6.1.2.1.10.4.50.38.1.7.1.6ColumnoptixL2IgmpRouterCreateTimeExread-onlycurrentThis object indicates the creation time of the multicast router port.
1.3.6.1.2.1.10.4.50.38.1.7.1.7ColumnoptixL2IgmpRouterCentSecExread-onlycurrentThis object indicates the multicast router port centisecond.
1.3.6.1.2.1.10.4.50.38.1.7.1.8ColumnoptixL2IgmpRouterRemainTimeExread-onlycurrentThis object indicates theremaining aging time of the multicast router port. Value range: 1 to 120 (unit: minute).
1.3.6.1.2.1.10.4.50.38.1.7.1.255ColumnoptixL2IgmpRouterExRowStatusread-onlycurrentThis object indicates the row status of the multicast router port.
1.3.6.1.2.1.10.4.50.38.1.8TableoptixL2IgmpVlanTablenot-accessiblecurrentThis table describes the basic configurations of add or delete router port .
1.3.6.1.2.1.10.4.50.38.1.8.1RowoptixL2IgmpVlanEntrynot-accessiblecurrentThis entry describes the basic configurations of add or delete router port .
1.3.6.1.2.1.10.4.50.38.1.8.1.1ColumnoptixL2IgmpVlanPortNumread-createcurrentRouter port number. Value range for RTN equipment: 0 to 1024.
1.3.6.1.2.1.10.4.50.38.1.8.1.2ColumnoptixL2IgmpVlanPortTyperead-createcurrentRouter port type. Input format: V-UNI or V-NNI. & is used to separte multiple formats. For example, V-UNI & V-UNI.
1.3.6.1.2.1.10.4.50.38.1.8.1.3ColumnoptixL2IgmpVlanPortIDread-createcurrentRouter port ID. & is used to separate multiple port IDs. For example, 1 & 2.
1.3.6.1.2.1.10.4.50.38.1.8.1.4ColumnoptixL2IgmpVlanActionread-createcurrentThe action of add or delete port,query invalid
1.3.6.1.2.1.10.4.50.38.1.8.1.255ColumnoptixL2IgmpVlanRowStatusread-createcurrentRow Status
1.3.6.1.2.1.10.4.50.38.1.9TableoptixL2IgmpVlanMacTablenot-accessiblecurrentThis table describes the basic configurations of add or delete static group port .
1.3.6.1.2.1.10.4.50.38.1.9.1RowoptixL2IgmpVlanMacEntrynot-accessiblecurrentThis entry describes the basic configurations of add or delete static group port .
1.3.6.1.2.1.10.4.50.38.1.9.1.1ColumnoptixL2IgmpVlanMacPortNumread-createcurrentGroup port number. Value range for RTN equipment: 0 to 1024.
1.3.6.1.2.1.10.4.50.38.1.9.1.2ColumnoptixL2IgmpVlanMacPortTyperead-createcurrentGroup port type. Input format: V-UNI or V-NNI. & is used to separte multiple formats. For example, V-UNI & V-UNI.
1.3.6.1.2.1.10.4.50.38.1.9.1.3ColumnoptixL2IgmpVlanMacPortIDread-createcurrentGroup port ID. & is used to separate multiple port IDs. For example, 1 & 2.
1.3.6.1.2.1.10.4.50.38.1.9.1.4ColumnoptixL2IgmpVlanMacActionread-createcurrentThe action of add or delete group port,query invalid
1.3.6.1.2.1.10.4.50.38.1.9.1.255ColumnoptixL2IgmpVlanMacRowStatusread-createcurrentRow Status
1.3.6.1.2.1.10.4.50.38.1.10TableoptixL2IgmpMultiStcPortTablenot-accessiblecurrentThis table contains configuration information for adding and deleting specific multicast ports
1.3.6.1.2.1.10.4.50.38.1.10.1RowoptixL2IgmpMultiStcPortEntrynot-accessiblecurrentThis entry contains configuration information for adding and deleting specific multicast ports
1.3.6.1.2.1.10.4.50.38.1.10.1.1ColumnoptixL2IgmpMultiStcPortGropIpnot-accessiblecurrentMulticast IP address Value range: 224.0.1.0 ~ 239.255.255.255
1.3.6.1.2.1.10.4.50.38.1.10.1.2ColumnoptixL2IgmpMultiStcPortSrcIpnot-accessiblecurrentSource IP address Value range is all class A, B, and C addresses
1.3.6.1.2.1.10.4.50.38.1.10.1.3ColumnoptixL2IgmpMultiStcPortTypenot-accessiblecurrentPort type vuni (1), vnni (2)
1.3.6.1.2.1.10.4.50.38.1.10.1.4ColumnoptixL2IgmpMultiStcPortIdnot-accessiblecurrentport id
1.3.6.1.2.1.10.4.50.38.1.10.1.5ColumnoptixL2IgmpMultiStcPortNumread-onlycurrentport num
1.3.6.1.2.1.10.4.50.38.1.10.1.6ColumnoptixL2IgmpMultiStcPortSrcread-onlycurrentPort dynamic and static types static (1), dynamic (2), stcdyn (3), ssmmap (4), stcssm (5), dynssm (6), stcdynssm (7), protocol (8)
1.3.6.1.2.1.10.4.50.38.1.10.1.7ColumnoptixL2IgmpMultiRemainTimeread-onlycurrentNumber of remaining unresponsive ports
1.3.6.1.2.1.10.4.50.38.1.10.1.8ColumnoptixL2IgmpMultiGroupTimeread-onlycurrentGroup timer for port
1.3.6.1.2.1.10.4.50.38.1.10.1.9ColumnoptixL2IgmpMultiFiltModeread-onlycurrentPort filtering mode include(1),exclude(2)
1.3.6.1.2.1.10.4.50.38.1.10.1.10ColumnoptixL2IgmpMultiCompatModeread-onlycurrentCompatibility mode v1(1),v2(2),v3(3)
1.3.6.1.2.1.10.4.50.38.1.10.1.11ColumnoptixL2IgmpMultiV1HostLiveTimeread-onlycurrentV1 host port remaining time (Unit of second)
1.3.6.1.2.1.10.4.50.38.1.10.1.12ColumnoptixL2IgmpMultiV2HostLiveTimeread-onlycurrentV2 host port remaining time (in seconds)
1.3.6.1.2.1.10.4.50.38.1.10.1.13ColumnoptixL2IgmpMultiSrcipTimerread-onlycurrentSource IP timer (in seconds)
1.3.6.1.2.1.10.4.50.38.1.10.1.14ColumnoptixL2IgmpMultiSrcipSrcread-onlycurrentSource IP source: static (1), dynamic (2), stcdyn (3), ssmmap (4), stcssm (5), dynssm (6), stcdynssm (7), protocol (8)
1.3.6.1.2.1.10.4.50.38.1.10.1.15ColumnoptixL2IgmpMultiIgmpPortTyperead-onlycurrentMulticast port type: routeport (0), hostport (1), routehost (2)
1.3.6.1.2.1.10.4.50.38.1.11TableoptixL2IgmpMultiGroupTablenot-accessiblecurrentThis table contains configuration information for multicast groups.
1.3.6.1.2.1.10.4.50.38.1.11.1RowoptixL2IgmpMultiGroupEntrynot-accessiblecurrentThis entry contains the configuration information for the multicast group
1.3.6.1.2.1.10.4.50.38.1.11.1.1ColumnoptixL2IgmpMultiGroupPortNumread-createcurrentNumber of multicast groups
1.3.6.1.2.1.10.4.50.38.1.11.1.2ColumnoptixL2IgmpMultiGroupPortListread-createcurrentMulticast group port list Input format is type and port id If multiple connections are used, such as: vuni&1,vnni&2
1.3.6.1.2.1.10.4.50.38.1.11.1.3ColumnoptixL2IgmpMultiStcPortOperFlagread-createcurrentAdd setting mode for specific multicast port add(1),set(2),invalid(255)
1.3.6.1.2.1.10.4.50.38.1.11.1.4ColumnoptixL2IgmpMultiGroupCrtTimeread-onlycurrentMulticast group establishment time
1.3.6.1.2.1.10.4.50.38.1.11.1.255ColumnoptixL2IgmpMultiGroupRowStatusread-createcurrentAdd or delete row status of a multicast group
1.3.6.1.2.1.10.4.50.38.1.12TableoptixL2IgmpClrDynGroupTablenot-accessiblecurrentThis table contains configuration information for multicast groups.
1.3.6.1.2.1.10.4.50.38.1.12.1RowoptixL2IgmpClrDynGroupEntrynot-accessiblecurrentThis entry contains configuration information to delete IGMP dynamic school performance
1.3.6.1.2.1.10.4.50.38.1.12.1.1ColumnoptixL2IgmpClrDynGroupOperFlagread-writecurrentClear flag clear (0)
1.3.6.1.2.1.10.4.50.38.1.13TableoptixL2IgmpV3AttrTablenot-accessiblecurrentThis table contains the configuration attributes of the IGMPV3 protocol.
1.3.6.1.2.1.10.4.50.38.1.13.1RowoptixL2IgmpV3AttrEntrynot-accessiblecurrentThis entry contains the configuration attributes of the IGMPV3 protocol.
1.3.6.1.2.1.10.4.50.38.1.13.1.1ColumnoptixL2IgmpV3AttrSrvIndexnot-accessiblecurrentthe service index
1.3.6.1.2.1.10.4.50.38.1.13.1.2ColumnoptixL2IgmpV3AttrVerread-writecurrentprotocol version, v1(1), v2(2),v3(3)
1.3.6.1.2.1.10.4.50.38.1.13.1.3ColumnoptixL2IgmpV3AttrRobustread-writecurrentrobustness variable
1.3.6.1.2.1.10.4.50.38.1.13.1.4ColumnoptixL2IgmpV3AttrQueryIntervalread-writecurrentquery Period
1.3.6.1.2.1.10.4.50.38.1.13.1.5ColumnoptixL2IgmpV3AttrRspIntervalread-writecurrentquery response period
1.3.6.1.2.1.10.4.50.38.1.13.1.6ColumnoptixL2IgmpV3AttrSSMEnableread-writecurrentTo enable the SSM mapping, run the enable(1),disable(0) command.
1.3.6.1.2.1.10.4.50.38.1.14TableoptixL2IgmpV3SSMMapTablenot-accessiblecurrentThis table describes the basic configurations of add or delete static group port .
1.3.6.1.2.1.10.4.50.38.1.14.1RowoptixL2IgmpV3SSMMapEntrynot-accessiblecurrentThis entry describes the basic configurations of add or delete static group port .
1.3.6.1.2.1.10.4.50.38.1.14.1.1ColumnoptixL2IgmpV3SSMMapSrvIndexread-createcurrentthe service index
1.3.6.1.2.1.10.4.50.38.1.14.1.2ColumnoptixL2IgmpV3SSMMapMulticastIpread-createcurrentmulticast IP address
1.3.6.1.2.1.10.4.50.38.1.14.1.3ColumnoptixL2IgmpV3SSMMapAddrMaskread-createcurrentmulticast address mask
1.3.6.1.2.1.10.4.50.38.1.14.1.4ColumnoptixL2IgmpV3SSMMapSrcIPNumread-createcurrentnumber of multicast sources
1.3.6.1.2.1.10.4.50.38.1.14.1.5ColumnoptixL2IgmpV3SSMMapSrcIPread-createcurrentMulticast source IP, if there are multiple, connect with &, such as:192.168.10.3&192.168.10.5
1.3.6.1.2.1.10.4.50.38.1.14.1.6ColumnoptixL2IgmpV3SSMMapActionread-createcurrentAdd or set the mapping relationship .add(1) and set(2). Query invalid(255).
1.3.6.1.2.1.10.4.50.38.1.14.1.255ColumnoptixL2IgmpV3SSMMapRowStatusread-createcurrentAdd or delete the row status of the mapping relationship