OPTIX-L2-LPT-MIB
124 objects
This mib specifies the port configuration information of L2 lpt
Imported Objects
| OPTIX-BOARD-MANAGE-MIB | optixLogBoardId optixLogSubCardId |
| OPTIX-OID-MIB | optixProvisionPtn |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.50.20 | IdentityoptixL2Lpt | This mib specifies the port configuration information of L2 lpt | ||
| 1.3.6.1.2.1.10.4.50.20.1 | NodeoptixL2LptGroup | |||
| 1.3.6.1.2.1.10.4.50.20.1.2 | TableoptixL2LptTable | not-accessible | current | This table describes the configurations of the L2 LPT in the point-to-multipoint mode. |
| 1.3.6.1.2.1.10.4.50.20.1.2.1 | RowoptixL2LptEntry | not-accessible | current | This entry describes the configurations of the L2 LPT in the point-to-multipoint mode. |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.1 | ColumnoptixL2LptRootType | not-accessible | current | This object indicates the root parameter type of the L2 LPT in the point-to-multipoint mode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.2 | ColumnoptixL2LptRootPara1 | not-accessible | current | This object indicates the root parameter1 of the L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a slot ID. I… |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.3 | ColumnoptixL2LptRootPara2 | not-accessible | current | This object indicates the root parameter 2 of the L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a sub-slot … |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.4 | ColumnoptixL2LptRootPara3 | not-accessible | current | This object indicates the root parameter 3 of the L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a port ID. … |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.5 | ColumnoptixL2LptPmpLeafType | read-only | current | This object indicates the leaf parameter type of the L2 LPT in the point-to-multipointmode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.6 | ColumnooptixL2LptPmpLeafNum | read-only | current | This object indicates the number of L2 LPT leavesin the point-to-multipointmode. Value range: 0 to 16. |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.7 | ColumnoptixL2LptPmpWtrTime | read-only | current | This object indicates the WTR time of the L2 LPT in the point-to-multipoint mode. Value range: 1 to 600 (unit: s). The default value is 1. |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.8 | ColumnoptixL2LptPmpDelayTime | read-only | current | This object indicates the delay time of the L2 LPT in the point-to-multipointmode. Value range: 0 to 10000 (unit: ms). The default value is 1000 and the step l… |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.9 | ColumnoptixL2LptPmpOamType | read-only | current | This object indicates the OAM typeof the L2 LPT in the point-to-multipointmode. 0: IptOam, 1: pwOam |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.10 | ColumnoptixL2LptPmpOamPeriod | read-only | current | This object indicates the OAM period of the L2 LPT in the point-to-multipoint mode. Value range: 10 to 100 (unit: ms). The default value is 10. |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.11 | ColumnoptixL2LptPmpSwitchMode | read-only | current | This object indicates the switching mode of the L2 LPT in the point-to-multipoint mode. 0: strict, 1: nostrict |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.12 | ColumnoptixL2LptPmpEnable | read-only | current | This object indicates the enable status of the L2 LPT in the point-to-multipoint mode. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.13 | ColumnoptixL2LptAcDefect | read-only | current | This object indicates the local user-side fault. 0: indicates that there is no fault. 1: indicates that there are faults. |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.14 | ColumnoptixL2LptNetDefect | read-only | current | This object indicates the local network-side fault. 0: indicates that there is no fault. 1: indicates that there are faults. |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.15 | ColumnoptixL2LptRemoteDefect | read-only | current | This object indicates the remote LPT instance fault. 0: indicates that there is no fault. 1: indicates that there are faults. |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.16 | ColumnoptixL2LptState | read-only | current | This object indicates the protocol status of the L2 LPT. 0: normal, 1: useFault, 2: networkFault, 3: faultRecoverWait, 4: faultRecover, 5: init |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.17 | ColumnoptixL2LptPeerNetType | read-only | current | This object indicates the protocol type of the remote L2 LPT. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.18 | ColumnoptixL2LptPeerNetPara1 | read-only | current | This object indicates the root parameter1 of the remote L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a slo… |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.19 | ColumnoptixL2LptPeerNetPara2 | read-only | current | This object indicates the root parameter 2 of the remote L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a su… |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.20 | ColumnoptixL2LptPeerNetPara3 | read-only | current | This object indicates the root parameter 3 of the remote L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a po… |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.21 | ColumnoptixL2LptPeerVlanID | read-only | current | This object indicates the Pass Vlan id of the L2 LPT. Value range: 1 to 4094 (valid values). This parameter can also be set to 0xFFFF (the default value), indi… |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.22 | ColumnoptixL2LptPeerBid | read-only | current | This object indicates the Board ID of the L2 LPT. |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.23 | ColumnoptixL2LptPeerSubid | read-only | current | This object indicates the Sub Board ID of the L2 LPT. |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.24 | ColumnoptixL2LptPeerPortid | read-only | current | This object indicates the Port ID of the L2 LPT. |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.25 | ColumnoptixL2LptPtpCarryType | read-only | current | This object indicates the carrier type of the L2 LPT in the point-to-point mode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.26 | ColumnoptixL2LptPtpCarryIndex1 | read-only | current | This object indicates the index 1 to the L2 LPT carrier in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a slot ID. If the… |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.27 | ColumnoptixL2LptPtpCarryIndex2 | read-only | current | This object indicates the index 2 to the L2 LPT carrier in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a sub-slot ID. If… |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.28 | ColumnoptixL2LptPtpCarryIndex3 | read-only | current | This object indicates the index 3 to the L2 LPT carrier in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a port ID. If the… |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.29 | ColumnoptixL2LptPtpEnable | read-only | current | This object indicates the enable status of the L2 LPT in the point-to-point mode. |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.30 | ColumnoptixL2LptPtpWtrTime | read-only | current | This object indicates the WTR time of the L2 LPT in the point-to-point mode. |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.31 | ColumnoptixL2LptPtpDelayTime | read-only | current | This object indicates the delay time of the L2 LPT in the point-to-point mode. |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.32 | ColumnoptixL2LptPtpOamType | read-only | current | This object indicates the network fault detection mode of the L2 LPT. |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.33 | ColumnoptixL2LptPtpOamPeriod | read-only | current | This object indicates the network fault detection period of the L2 LPT. |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.34 | ColumnoptixL2LptPtpSwitchMode | read-only | current | This object indicates the switching mode of the L2 LPT. |
| 1.3.6.1.2.1.10.4.50.20.1.2.1.255 | ColumnoptixL2LptPtpRowStatus | read-only | current | This object indicates the row status of the L2 LPT. |
| 1.3.6.1.2.1.10.4.50.20.1.3 | TableoptixL2SimpleLptSingleTable | not-accessible | current | This table describes the mapping configurations of the L2 LPT in the point-to-multipoint mode. |
| 1.3.6.1.2.1.10.4.50.20.1.3.1 | RowoptixL2SimpleLptSingleEntry | not-accessible | current | This entry describes the mapping configurations of the L2 LPT in the point-to-multipoint mode. |
| 1.3.6.1.2.1.10.4.50.20.1.3.1.1 | ColumnoptixL2SimpleLptMainPid | not-accessible | current | This object indicates the master port of the L2 LPT mapping in the point-to-multipoint mode. |
| 1.3.6.1.2.1.10.4.50.20.1.3.1.2 | ColumnoptixL2SimpleLptSlvBid | not-accessible | current | This object indicates the slot ID of the slave portof the L2 LPT mapping in the point-to-multipoint mode. |
| 1.3.6.1.2.1.10.4.50.20.1.3.1.3 | ColumnoptixL2SimpleLptSlvSubid | not-accessible | current | This object indicates the subboard ID of the slave port of the L2 LPT mapping in the point-to-multipoint mode. |
| 1.3.6.1.2.1.10.4.50.20.1.3.1.4 | ColumnoptixL2SimpleLptSlvPid | not-accessible | current | This object indicates the port number of the slave port of the L2 LPT mapping in the point-to-multipoint mode. Value range: 1 to 512. |
| 1.3.6.1.2.1.10.4.50.20.1.3.1.5 | ColumnoptixL2SimpleLptSlvNum | read-create | current | This object indicates the number of slave ports of the L2 LPT mapping in the point-to-multipoint mode. Value range: 1 to 512. |
| 1.3.6.1.2.1.10.4.50.20.1.3.1.255 | ColumnoptixL2SimpleLptSingleRowStatus | read-create | current | This Row Status describes the mapping configurations of the L2 LPT in the point-to-multipoint mode. |
| 1.3.6.1.2.1.10.4.50.20.1.4 | TableoptixL2LptPortTable | not-accessible | current | This table describes the L2 LPT port configurations. |
| 1.3.6.1.2.1.10.4.50.20.1.4.1 | RowoptixL2LptPortEntry | not-accessible | current | This entry describes the L2 LPT port configurations. |
| 1.3.6.1.2.1.10.4.50.20.1.4.1.1 | ColumnoptixL2LptPortPid | not-accessible | current | This object indicates the L2LPT port number. |
| 1.3.6.1.2.1.10.4.50.20.1.4.1.2 | ColumnoptixL2LptPortState | read-only | current | This object indicates the disable status of the L2 LPT. 0: IptClose, 1: IptOpen |
| 1.3.6.1.2.1.10.4.50.20.1.5 | NodeoptixL2LptPortStateEventMember | |||
| 1.3.6.1.2.1.10.4.50.20.1.5.1 | ScalaroptixL2LptPortStateBoardID | accessible-for-notify | current | This object indicates the slot ID of the reported event. |
| 1.3.6.1.2.1.10.4.50.20.1.5.2 | ScalaroptixL2LptPortStateSubBoardID | accessible-for-notify | current | This object indicates the subboard ID of the reported event. |
| 1.3.6.1.2.1.10.4.50.20.1.5.3 | ScalaroptixL2LptPortStatePortID | accessible-for-notify | current | This object indicates the port number of the reported event. |
| 1.3.6.1.2.1.10.4.50.20.1.5.4 | ScalaroptixL2LptPortStateValue | accessible-for-notify | current | This object indicates the port state of the reported event. 0: IptClose, 1: IptOpen |
| 1.3.6.1.2.1.10.4.50.20.1.6 | NodeoptixL2LptPortStateEvent | |||
| 1.3.6.1.2.1.10.4.50.20.1.6.1 | NotificationoptixL2LptPortStateTrap | current | This object is used to report LPT port open/close status change events. | |
| 1.3.6.1.2.1.10.4.50.20.1.7 | TableoptixL2LptPropertyTable | not-accessible | current | This table describes the configurations of the L2 LPT. |
| 1.3.6.1.2.1.10.4.50.20.1.7.1 | RowoptixL2LptPropertyEntry | not-accessible | current | This entry describes the configurations of the L2 LPT. |
| 1.3.6.1.2.1.10.4.50.20.1.7.1.1 | ColumnoptixL2LptPropertyEnable | read-write | current | This object indicates the enable status of the L2 LPT. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.50.20.1.7.1.2 | ColumnoptixL2LptPropertyWtrTime | read-write | current | This object indicates the WTR time of the L2 LPT. Value range: 1 to 600 (unit: s). The default value is 1. |
| 1.3.6.1.2.1.10.4.50.20.1.7.1.3 | ColumnoptixL2LptPropertyDelayTime | read-write | current | This object indicates the delay time of the L2 LPT. Value range: 0 to 10000 (unit: ms). The default value is 1000 and the step length is 100. |
| 1.3.6.1.2.1.10.4.50.20.1.7.1.4 | ColumnoptixL2LptPropertySwitchMode | read-write | current | This object indicates the switching modeof the L2 LPT. 0: strict, 1: nostrict |
| 1.3.6.1.2.1.10.4.50.20.1.7.1.5 | ColumnoptixL2LptPropertyOamType | read-write | current | This object indicates the OAM type of the L2 LPT. 0: IptOam, 1: pwOam |
| 1.3.6.1.2.1.10.4.50.20.1.7.1.6 | ColumnoptixL2LptPropertyLptOamPeriod | read-write | current | This object indicates the OAM period of the L2 LPT. Value range: 10 to 100 (unit: ms). The default value is 10. |
| 1.3.6.1.2.1.10.4.50.20.1.7.1.7 | ColumnoptixL2LptPropertyState | read-only | current | This object indicates the protocol status of the L2 LPT. 0: normal, 1: useFault, 2: networkFault, 3: faultRecoverWait, 4: faultRecover, 5: init |
| 1.3.6.1.2.1.10.4.50.20.1.7.1.8 | ColumnoptixL2LptPropertyAcDefect | read-only | current | This object indicates the local user-side fault of the L2 LPT. 0: indicates that there is no fault. 1: indicates that there are faults. |
| 1.3.6.1.2.1.10.4.50.20.1.7.1.9 | ColumnoptixL2LptPropertyNetDefect | read-only | current | This object indicates the local network-side fault of the L2 LPT. 0: indicates that there is no fault. 1: indicates that there are faults. |
| 1.3.6.1.2.1.10.4.50.20.1.7.1.10 | ColumnoptixL2LptPropertyRemoteDefect | read-only | current | This object indicates the remote LPT instance fault of the L2 LPT. 0: indicates that there is no fault. 1: indicates that there are faults. |
| 1.3.6.1.2.1.10.4.50.20.1.8 | TableoptixL2LptPtpTable | not-accessible | current | This table describes the configurations of the L2 LPT in the point-to-point mode. |
| 1.3.6.1.2.1.10.4.50.20.1.8.1 | RowoptixL2LptPtpEntry | not-accessible | current | This entry describes the configurations of the L2 LPT in the point-to-point mode. |
| 1.3.6.1.2.1.10.4.50.20.1.8.1.1 | ColumnoptixL2LptPtpLeafType | read-create | current | This object indicates the carrier type of the L2 LPT in the point-to-point mode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net |
| 1.3.6.1.2.1.10.4.50.20.1.8.1.2 | ColumnoptixL2LptPtpLeafPara1 | read-create | current | This object indicates the parameter 1 to the L2 LPT in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a slot ID. If the par… |
| 1.3.6.1.2.1.10.4.50.20.1.8.1.3 | ColumnoptixL2LptPtpLeafPara2 | read-create | current | This object indicates the parameter 2 to the L2 LPT in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a sub-slot ID. If the… |
| 1.3.6.1.2.1.10.4.50.20.1.8.1.4 | ColumnoptixL2LptPtpLeafPara3 | read-create | current | This object indicates the parameter 3 to the L2 LPT in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a port ID. If the par… |
| 1.3.6.1.2.1.10.4.50.20.1.8.1.5 | ColumnoptixL2LptPtpL2netMyPara3 | read-create | current | This object indicates the local parameter 3 of the L2net in the point-to-point mode. Value range: 1 to 0xffffffff. |
| 1.3.6.1.2.1.10.4.50.20.1.8.1.6 | ColumnoptixL2LptPtpL2netPeerPara3 | read-create | current | This object indicates the peer parameter 3 of the remote L2net in the point-to-point mode. Value range: 1 to 0xffffffff. |
| 1.3.6.1.2.1.10.4.50.20.1.8.1.7 | ColumnoptixL2LptPtpL2netVlanID | read-create | current | This object indicates the Pass Vlan id of the remote L2net in the point-to-point mode. Value range: 1 to 4094 (valid values). This parameter can also be set to… |
| 1.3.6.1.2.1.10.4.50.20.1.8.1.8 | ColumnoptixL2LptPtpL2netBid | read-create | current | This object indicates the Board ID of the remote L2net in the point-to-point mode. |
| 1.3.6.1.2.1.10.4.50.20.1.8.1.9 | ColumnoptixL2LptPtpL2netSubid | read-create | current | This object indicates the Sub Board ID of the remote L2net in the point-to-point mode. |
| 1.3.6.1.2.1.10.4.50.20.1.8.1.10 | ColumnoptixL2LptPtpL2netPortid | read-create | current | This object indicates the Port ID of the remote L2net in the point-to-point mode. |
| 1.3.6.1.2.1.10.4.50.20.1.8.1.11 | ColumnoptixL2LptPtpRowStatusExt | read-create | current | This object indicates the row status of the L2 LPT in the point-to-point mode. |
| 1.3.6.1.2.1.10.4.50.20.1.9 | TableoptixL2LptPmpTable | not-accessible | current | This table describes the configurations of the L2 LPT in the point-to-multipoint mode. |
| 1.3.6.1.2.1.10.4.50.20.1.9.1 | RowoptixL2LptPmpEntry | not-accessible | current | This entry describes the configurations of the L2 LPT in the point-to-multipoint mode. |
| 1.3.6.1.2.1.10.4.50.20.1.9.1.1 | ColumnoptixL2LptPmpLeafTypeExt | read-create | current | This object indicates the leaf parameter type of the L2 LPT in the point-to-multipoint mode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net |
| 1.3.6.1.2.1.10.4.50.20.1.9.1.2 | ColumnoptixL2LptPmpLeafNumExt | read-create | current | This object indicates the number of L2 LPT in the point-to-multipointmode. Value range: 0 to 16. |
| 1.3.6.1.2.1.10.4.50.20.1.9.1.3 | ColumnoptixL2LptPmpLeafParaList | read-create | current | This object indicates the leaf parameter of the L2 LPT in the point-to-multipoint mode. |
| 1.3.6.1.2.1.10.4.50.20.1.9.1.4 | ColumnoptixL2LptPmpL2netMyPara3 | read-create | current | This object indicates the local parameter 3 of the L2net in the point-to-multipoint mode. Value range: 1 to 0xffffffff. |
| 1.3.6.1.2.1.10.4.50.20.1.9.1.5 | ColumnoptixL2LptPmpL2netPeerPara3 | read-create | current | This object indicates the peer parameter 3 of the remote L2net in the point-to-multipoint mode. Value range: 1 to 0xffffffff. |
| 1.3.6.1.2.1.10.4.50.20.1.9.1.6 | ColumnoptixL2LptPmpL2netVlanID | read-create | current | This object indicates the Pass Vlan id of the remote L2net in the point-to-multipoint mode. Value range: 1 to 4094 (valid values). This parameter can also be s… |
| 1.3.6.1.2.1.10.4.50.20.1.9.1.7 | ColumnoptixL2LptPmpL2netBid | read-create | current | This object indicates the Board ID of the remote L2net in the point-to-multipointmode. |
| 1.3.6.1.2.1.10.4.50.20.1.9.1.8 | ColumnoptixL2LptPmpL2netSubid | read-create | current | This object indicates the Sub Board ID of the remote L2net in the point-to-multipoint mode. |
| 1.3.6.1.2.1.10.4.50.20.1.9.1.9 | ColumnoptixL2LptPmpL2netPortid | read-create | current | This object indicates the Port ID of the remote L2net in the point-to-multipointmode. |
| 1.3.6.1.2.1.10.4.50.20.1.9.1.255 | ColumnoptixL2LptPmpRowStatus | read-create | current | This object indicates the row status of the L2 LPT in the point-to-multipointmode. |
| 1.3.6.1.2.1.10.4.50.20.1.10 | TableoptixL2SimpleLptTable | not-accessible | current | This table describes the mapping configurations of the Simple Lpt. |
| 1.3.6.1.2.1.10.4.50.20.1.10.1 | RowoptixL2SimpleLptEntry | not-accessible | current | This entry describes the mapping configurations of the Simple Lpt. |
| 1.3.6.1.2.1.10.4.50.20.1.10.1.1 | ColumnoptixL2SimpleLptSlaveNum | read-create | current | This object indicates the number of slave ports of the Simple LPT. Value range: 1 to 512. |
| 1.3.6.1.2.1.10.4.50.20.1.10.1.2 | ColumnoptixL2SimpleLptSlaveList | read-create | current | This object indicates the slave port list of the Simple Lpt. & is used to separate multiple lists. For example, 3 & 25 & 1 & 3 … |
| 1.3.6.1.2.1.10.4.50.20.1.10.1.3 | ColumnoptixL2SimpleLptAction | read-create | current | This object indicates the action of the Simple LPT. |
| 1.3.6.1.2.1.10.4.50.20.1.10.1.255 | ColumnoptixL2SimpleLptRowStatus | read-create | current | This object indicates the row status of the Simple LPT. |
| 1.3.6.1.2.1.10.4.50.20.1.11 | TableoptixL2LptL2netTable | not-accessible | current | This table describes the configurations of the L2Net LPT . |
| 1.3.6.1.2.1.10.4.50.20.1.11.1 | RowoptixL2LptL2netEntry | not-accessible | current | This entry describes the configurations of the L2Net LPT . |
| 1.3.6.1.2.1.10.4.50.20.1.11.1.1 | ColumnoptixL2LptL2netMyType | not-accessible | current | This object indicates the My type of the L2Net LPT. 5: l2net |
| 1.3.6.1.2.1.10.4.50.20.1.11.1.2 | ColumnoptixL2LptL2netPeerType | read-write | current | This object indicates the peer type of theL2Net LPT. 5: l2net |
| 1.3.6.1.2.1.10.4.50.20.1.11.1.3 | ColumnoptixL2LptL2netPeerPara1 | read-write | current | This object indicates the peer parameter1 of the L2Net LPT. If the parameter type is l2net, it takes an invalid value (4294967295). |
| 1.3.6.1.2.1.10.4.50.20.1.11.1.4 | ColumnoptixL2LptL2netPeerPara2 | read-write | current | This object indicates the peer parameter 2 of the L2Net LPT. If the parameter type is l2net, it takes an invalid value (4294967295). |
| 1.3.6.1.2.1.10.4.50.20.1.11.1.5 | ColumnoptixL2LptL2netPeerPara3 | read-write | current | This object indicates the peer parameter 3 of the L2Net LPT. Value range: 1 to 0xffffffff. |
| 1.3.6.1.2.1.10.4.50.20.1.11.1.6 | ColumnoptixL2LptL2netVlanID | read-write | current | This object indicates the Vlan id of the L2Net LPT. Value range: 1 to 4094 (valid values). This parameter can also be set to 0xFFFF (the default value), indica… |
| 1.3.6.1.2.1.10.4.50.20.1.11.1.7 | ColumnoptixL2LptL2netBid | read-write | current | This object indicates the Board ID of the L2Net LPT. |
| 1.3.6.1.2.1.10.4.50.20.1.11.1.8 | ColumnoptixL2LptL2netSubid | read-write | current | This object indicates the Sub Board ID of the L2Net LPT. |
| 1.3.6.1.2.1.10.4.50.20.1.11.1.9 | ColumnoptixL2LptL2netPortid | read-write | current | This object indicates the Port ID of the L2Net LPT. |
| 1.3.6.1.2.1.10.4.50.20.1.12 | TableoptixL2LptLeafTable | not-accessible | current | This table describes the configurations of the L2 LPT in the leaf of point-to-multipoint mode. |
| 1.3.6.1.2.1.10.4.50.20.1.12.1 | RowoptixL2LptLeafEntry | not-accessible | current | This entry describes the configurations of the L2 LPT in the leaf of point-to-multipoint mode. |
| 1.3.6.1.2.1.10.4.50.20.1.12.1.1 | ColumnoptixL2LptLeafType | read-create | current | This object indicates the leaf parameter type of the L2 LPT in the leaf of point-to-multipointmode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net |
| 1.3.6.1.2.1.10.4.50.20.1.12.1.2 | ColumnoptixL2LptLeafNum | read-create | current | This object indicates the number of L2 LPT in the leaf of point-to-multipoint mode. Value range: 0 to 16. |
| 1.3.6.1.2.1.10.4.50.20.1.12.1.3 | ColumnoptixL2LptLeafParaList | read-create | current | This object indicates the leaf parameter of the L2 LPT in the leaf of point-to-multipoint mode. |
| 1.3.6.1.2.1.10.4.50.20.1.12.1.4 | ColumnoptixL2LptLeafL2netMyPara3 | read-create | current | This object indicates the local parameter 3 of the L2net in the leaf of point-to-multipoint mode. Value range: 1 to 0xffffffff. |
| 1.3.6.1.2.1.10.4.50.20.1.12.1.5 | ColumnoptixL2LptLeafL2netPeerPara3 | read-create | current | This object indicates the peer parameter 3 of the remote L2net in the leaf of point-to-multipoint mode. Value range: 1 to 0xffffffff. |
| 1.3.6.1.2.1.10.4.50.20.1.12.1.6 | ColumnoptixL2LptLeafL2netVlanID | read-create | current | This object indicates the Pass Vlan id of the remote L2net in the leaf of point-to-multipoint mode. Value range: 1 to 4094 (valid values). This parameter can a… |
| 1.3.6.1.2.1.10.4.50.20.1.12.1.7 | ColumnoptixL2LptLeafL2netBid | read-create | current | This object indicates the Board ID of the remote L2net in the leaf of point-to-multipoint mode. |
| 1.3.6.1.2.1.10.4.50.20.1.12.1.8 | ColumnoptixL2LptLeafL2netSubid | read-create | current | This object indicates the Sub Board ID of the remote L2net in the leaf of point-to-multipoint mode. |
| 1.3.6.1.2.1.10.4.50.20.1.12.1.9 | ColumnoptixL2LptLeafL2netPortid | read-create | current | This object indicates the Port ID of the remote L2net in the leaf of point-to-multipoint mode. |
| 1.3.6.1.2.1.10.4.50.20.1.12.1.255 | ColumnoptixL2LptLeafRowStatus | read-create | current | This object indicates the row status of the L2 LPT in the leaf of point-to-multipoint mode. |