OPTIX-MISC-MIB
50 objects
This mib specifies the general configuration information of device
Imported Objects
| OPTIX-OID-MIB | optixProvisionEqpt |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.30.39 | IdentityoptixMisc | This mib specifies the general configuration information of device | ||
| 1.3.6.1.2.1.10.4.30.39.1 | NodeoptixMiscGroup | |||
| 1.3.6.1.2.1.10.4.30.39.1.1 | ScalaroptixFanSpeed | read-write | current | This object indicates the fan speed. 4: stop, 1: low, 2: mid, 3: high, 5: autolow, 6: automid, 7: autohigh, 9: auto |
| 1.3.6.1.2.1.10.4.30.39.1.2 | ScalaroptixFanMinDispersion | read-only | current | This object indicates the minimum temperature difference allowed by the fan. 0: stop, 45: low, 58: mid, 65: high, 58: auto |
| 1.3.6.1.2.1.10.4.30.39.1.3 | TableoptixEnvironmentTable | not-accessible | current | This table describes the device environmentconfigurations. |
| 1.3.6.1.2.1.10.4.30.39.1.3.1 | RowoptixEnvironmentEntry | not-accessible | current | Thisentry describes the device environment configurations. |
| 1.3.6.1.2.1.10.4.30.39.1.3.1.1 | ColumnoptixEnvironmentBdId | not-accessible | current | This object indicates theslot IDof the board that supports environment configurations. |
| 1.3.6.1.2.1.10.4.30.39.1.3.1.2 | ColumnoptixRelayControlMode | read-write | current | This object indicates the relay control mode. 0: pmuauto, 1: pmumanual |
| 1.3.6.1.2.1.10.4.30.39.1.3.1.3 | ColumnoptixRelayNormalAlmState | read-write | current | This object indicates the general relay alarm status. 0: close, 1: open |
| 1.3.6.1.2.1.10.4.30.39.1.3.1.4 | ColumnoptixRelaySeriousAlmState | read-write | current | This object indicates theserious relay alarm status. 0: close, 1: open |
| 1.3.6.1.2.1.10.4.30.39.1.4 | TableoptixRelayTable | not-accessible | current | This table indicates the relay configuration information. |
| 1.3.6.1.2.1.10.4.30.39.1.4.1 | RowoptixRelayEntry | not-accessible | current | Thisentry indicates the relay configuration information. |
| 1.3.6.1.2.1.10.4.30.39.1.4.1.1 | ColumnoptixRelayId | not-accessible | current | This object indicates the ID of the relay connected to each board. |
| 1.3.6.1.2.1.10.4.30.39.1.4.1.2 | ColumnoptixRelayUseState | read-write | current | This object indicates the relayusage status. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.30.39.1.4.1.3 | ColumnoptixRelayAlmSwitchState | read-write | current | This object indicates the switch status of relay alarms. 0: close, 1: open |
| 1.3.6.1.2.1.10.4.30.39.1.4.1.4 | ColumnoptixRelayAlmLevel | read-write | current | This object indicates the alarm level. 0: critical, 1: major, 2: minor, 3: ignore |
| 1.3.6.1.2.1.10.4.30.39.1.4.1.5 | ColumnoptixRelayOutState | read-write | current | This object indicates the out state. 0: close, 1: open |
| 1.3.6.1.2.1.10.4.30.39.1.5 | TableoptixAlmOutputTable | not-accessible | current | This table describes the alarm output information. |
| 1.3.6.1.2.1.10.4.30.39.1.5.1 | RowoptixAlmOutputEntry | not-accessible | current | Thisentry describes the alarm output information. |
| 1.3.6.1.2.1.10.4.30.39.1.5.1.1 | ColumnoptixAlmOutputLevel | not-accessible | current | This object indicates the alarm output level. 1: critical, 2: major, 3: minor, 4: ignore |
| 1.3.6.1.2.1.10.4.30.39.1.5.1.2 | ColumnoptixAlmOutputNum | read-write | current | This object indicates the alarm output channel ID. 1: the first output channel, 2: the second output channel, 3: the third output channel, 4: the forth output … |
| 1.3.6.1.2.1.10.4.30.39.1.6 | TableoptixRelayNameTable | not-accessible | current | This table describes the relay name. |
| 1.3.6.1.2.1.10.4.30.39.1.6.1 | RowoptixRelayNameEntry | not-accessible | current | Thisentry describes the relay name. |
| 1.3.6.1.2.1.10.4.30.39.1.6.1.1 | ColumnoptixRelayType | not-accessible | current | This object indicates the relay type. 0: all, 1: input, 2: ext |
| 1.3.6.1.2.1.10.4.30.39.1.6.1.2 | ColumnoptixRelayName | read-write | current | This object indicates the relay name. |
| 1.3.6.1.2.1.10.4.30.39.1.7 | TableoptixOamPortMngTable | not-accessible | current | This table describes the OAM port configurations on devices. |
| 1.3.6.1.2.1.10.4.30.39.1.7.1 | RowoptixOamPortMngEntry | not-accessible | current | This entry describes the OAM port configurations on devices. |
| 1.3.6.1.2.1.10.4.30.39.1.7.1.1 | ColumnoptixOamBdId | not-accessible | current | This object indicates the slot ID of the communication board. |
| 1.3.6.1.2.1.10.4.30.39.1.7.1.2 | ColumnoptixOamSubBdId | not-accessible | current | This object indicates the subboard ID of the communication board. This parameter takes a fixed value of 255. |
| 1.3.6.1.2.1.10.4.30.39.1.7.1.3 | ColumnoptixOamPortId | not-accessible | current | This object indicates the port number of the communication board. |
| 1.3.6.1.2.1.10.4.30.39.1.7.1.4 | ColumnoptixOamPortType | read-only | current | This object indicates the OAM port type. 0: all, 1: com, 2: eth, 3: oam, 4: fF, 5: ext, 6: usb |
| 1.3.6.1.2.1.10.4.30.39.1.7.1.5 | ColumnoptixOamPortState | read-write | current | This object indicates the OAM port status. 0: close, 1: open |
| 1.3.6.1.2.1.10.4.30.39.1.8 | TableoptixCommuMngTable | not-accessible | current | This table describes the configurations of communication boards on devices. |
| 1.3.6.1.2.1.10.4.30.39.1.8.1 | RowoptixCommuMngEntry | not-accessible | current | Thisentry describes the configurations of communication boards on devices. |
| 1.3.6.1.2.1.10.4.30.39.1.8.1.1 | ColumnoptixCommuBdId | not-accessible | current | This object indicates the slot ID of the communication board. |
| 1.3.6.1.2.1.10.4.30.39.1.8.1.2 | ColumnoptixCommuSubBdId | not-accessible | current | This object indicates the subboard ID of the communication board. This parameter takes a fixed value of 255. |
| 1.3.6.1.2.1.10.4.30.39.1.8.1.3 | ColumnoptixCommuPortId | not-accessible | current | This object indicates the port number of the communication board. |
| 1.3.6.1.2.1.10.4.30.39.1.8.1.4 | ColumnoptixEthPortAdaptMode | read-write | current | This object indicates the adaptation mode of the ETH port. 0: fixed, 1: adapt |
| 1.3.6.1.2.1.10.4.30.39.1.8.1.5 | ColumnoptixEthPortAdaptSpeed | read-write | current | This object indicates the speed mode of the ETH port. 1: snmp100m, 0: snmp10m, 254: commufail, 255: inautonego |
| 1.3.6.1.2.1.10.4.30.39.1.8.1.6 | ColumnoptixEthPortAdaptDuplex | read-write | current | This object indicates the transmission modeof the ETH port. 1: full, 0: half, 254: commufail, 255: inautonego |
| 1.3.6.1.2.1.10.4.30.39.1.8.1.7 | ColumnoptixCommuRealMode | read-only | current | This object indicates the real working mode of the ETH port. 0: fixed, 1: adapt |
| 1.3.6.1.2.1.10.4.30.39.1.8.1.8 | ColumnoptixCommuRealSpeed | read-only | current | This object indicates the real speed mode of the ETH port. 1: snmp100m, 0: snmp10m, 254: commufail, 255: inautonego |
| 1.3.6.1.2.1.10.4.30.39.1.8.1.9 | ColumnoptixCommuRealDuplex | read-only | current | This object indicates the real transmission modeof the ETH port. 1: full, 0: half, 254: commufail, 255: inautonego |
| 1.3.6.1.2.1.10.4.30.39.1.9 | TableoptixPowerMonstateTable | not-accessible | current | This table describes the power input monitoring enable status of the power board. |
| 1.3.6.1.2.1.10.4.30.39.1.9.1 | RowoptixPowerMonstateEntry | not-accessible | current | This entry describes the power input monitoring enable status of the power board. |
| 1.3.6.1.2.1.10.4.30.39.1.9.1.1 | ColumnoptixPowerMonstateSlotId | not-accessible | current | This parameter indicates the slot ID of the power board. |
| 1.3.6.1.2.1.10.4.30.39.1.9.1.2 | ColumnoptixPowerMonstatePort | not-accessible | current | This parameter indicates the power interface. Value range: 1: First power input 2: Second power input |
| 1.3.6.1.2.1.10.4.30.39.1.9.1.3 | ColumnoptixPowerMonstateState | read-write | current | This parameter indicates the enable status of power input monitoring. |
| 1.3.6.1.2.1.10.4.30.39.2 | NodeoptixMiscextGroup | |||
| 1.3.6.1.2.1.10.4.30.39.2.1 | ScalaroptixFanSpeedext | read-write | current | This object indicates the fan speed. |