OPTIX-MPLSTP-OAM-MIB
275 objects
This module is used to configure and manage the MPLS-TP OAM based on Y.1731. The MPLS-TP OAM is used to maintain and manage MPLS-TP networks, which caneffectivelydetect, identify, and locate faults of the MPLS-TP network and quickly perform a protection switching when the link is defective or faulty. The MPLS-TP network can be classified into three layers: section, LSP, and PW.The section layer is the server layer of the LSP layer which is the server layer of the PW layer. The PW layer is the server layer of the service layer. In other words, the LSP layer is the client layer of the section layer, the PW layer is the client layer of the LSP layer, and the service layer is the client layer of the PW layer.The MPLS-TP OAM is applied to the section, LSP, and PW layers of the MPLS-TP network to detect, identify, and locate faults.
Imported Objects
| OPTIX-OID-MIB | optixProvisionPtn |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.50.4 | IdentityoptixMplsTpOamMod | This module is used to configure and manage the MPLS-TP OAM based on Y.1731. The MPLS-TP OAM is used to maintain and manage MPLS-TP networks, which caneffectiv… | ||
| 1.3.6.1.2.1.10.4.50.4.1 | NodeoptixMplsTpOamObject | |||
| 1.3.6.1.2.1.10.4.50.4.1.1 | ScalaroptixMplsTpOamDefaultStandard | read-write | current | This object indicates the automatically created default OAM protocol standard when the tunnel/PW is created. 1: 1711 2: 1731 |
| 1.3.6.1.2.1.10.4.50.4.1.2 | ScalaroptixMplsTpOamOperator | read-write | current | This object indicates the operator ID, which is a character string containing 6 bytes. |
| 1.3.6.1.2.1.10.4.50.4.1.3 | ScalaroptixMplsTpOamCsfEnable | read-write | current | This object indicates whether the CSF is enabled. 1: enable 0: disable |
| 1.3.6.1.2.1.10.4.50.4.1.4 | ScalaroptixMplsTpOamLckReportEnable | read-only | current | This object indicates whether the LCK report function is enabled. 1: enable 0: disable |
| 1.3.6.1.2.1.10.4.50.4.1.5 | ScalaroptixMplsTpOamPortAisEnable | read-write | current | This object indicates whether the AIS alarm is enabled. 1: enable 0: disable |
| 1.3.6.1.2.1.10.4.50.4.1.6 | ScalaroptixMplsTpOamChannelType | read-write | current | This object indicates the channel type. Default: 0x7FFA Valid values range from 0 to oxffff. |
| 1.3.6.1.2.1.10.4.50.4.1.7 | ScalaroptixMplsTpOamWholeStandard | read-only | current | This object indicates the global OAM standard mode. 0: The OAM is not enabled. 1: 1711 2: 1731 3: hybrid configuration (both 1731 and 1711) |
| 1.3.6.1.2.1.10.4.50.4.1.8 | TableoptixTunnelTpOamMepTable | not-accessible | current | This table is used to configure and manage the tunnel TP OAM Meps based on Y.1731. These configurations include the OAM standard, OAM ID, enable status, MEG in… |
| 1.3.6.1.2.1.10.4.50.4.1.8.1 | RowoptixTunnelTpOamMepEntry | not-accessible | current | This entry indicates the parameter table for the tunnel TP OAM MEPs based on Y.1731. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.1 | ColumnoptixTunnelTpOamMepIndex | not-accessible | current | This object indicates the tunnel OAM MEP index, ranging from 1 to 0x00ffffff. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.2 | ColumnoptixTunnelTpOamMepEnable | read-write | current | This object indicates whether the OAM is enabled. 1: enable 0: disable |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.3 | ColumnoptixTunnelTpOamMepLevel | read-write | current | This object indicates the MEG level. Default: 7. Valid values range from 0 to 7. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.4 | ColumnoptixTunnelTpOamMepMegType | read-write | current | This object indicates the identifier type. 1: ip-based 2: icc-based 3: customer-based |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.5 | ColumnoptixTunnelTpOamMepId | read-write | current | This object indicates the MEP ID. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.6 | ColumnoptixTunnelTpOamMepPeerId | read-write | current | This object indicates the remote MEP ID. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.7 | ColumnoptixTunnelTpOamMepCheckWay | read-write | current | This object indicates the OAM detection mode. 1: auto 2: manual 255: invalid detection mode This parameter is unconfigurable when the tunnel is a unidirectiona… |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.8 | ColumnoptixTunnelTpOamMepCcTime | read-write | current | This object indicates the CC packet period. 1: 3.33ms 2: 10 ms 3: 100 ms 4: 1s (default) 5: 10s 6: 1 minute 7: 10 minutes 255: invalid |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.9 | ColumnoptixTunnelTpOamMepCcPri | read-write | current | This object indicates the CC priority. Valid values range from 0 to 7. 0xff: invalid |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.10 | ColumnoptixTunnelTpOamMepCcSend | read-write | current | This object indicates the CC start/stop status. 0: disable1: enable 255: invalid This parameter is unconfigurable when the tunnel is a unidirectional ingress n… |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.11 | ColumnoptixTunnelTpOamMepSf | read-write | current | This object indicates the SF threshold (packet loss rate). Valid values range from 0 to 100. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.12 | ColumnoptixTunnelTpOamMepSd | read-write | current | This object indicates the SD threshold (packet loss rate). Valid values range from 0 to 100. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.13 | ColumnoptixTunnelTpOamMepMegInfo | read-write | current | This object indicates the MEG ID, which is a character string. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.14 | ColumnoptixTunnelTpOamMepLckEnable | read-write | current | This object indicates the locking status. 1: enable 0: disable |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.15 | ColumnoptixTunnelTpOamMepLckTime | read-write | current | This object indicates theLCK packet period. 1: 3.33 ms 2: 10 ms 3: 100 ms 4: 1000 ms (1s) 5: 10000 ms (10s) 6:60000 ms (1 minute) 7: 600000 ms(10min) |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.16 | ColumnoptixTunnelTpOamMepLckPri | read-write | current | This object indicates the LCK packet priority. Valid values range from 0 to 7. 0xff indicates thatthe priority is synchronized with the CC packet priority. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.17 | ColumnoptixTunnelTpOamMepAisEnable | read-write | current | This object indicates whether the AIS is enabled. 1: enable 0: disable |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.18 | ColumnoptixTunnelTpOamMepAisTime | read-write | current | This object indicates the AIS packet period. 1: 3.3 ms 2: 10 ms 3: 100 ms 4: 1000 ms (1s) 5: 10000 ms (10s) 6: 60000 ms (1 minute) 7: 600000 ms (10 minutes) |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.19 | ColumnoptixTunnelTpOamMepAisPri | read-write | current | This object indicates the AIS packet priority. Valid values range from 0 to 7. 0xff indicates that the priority is synchronized with the CC packet priority. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.20 | ColumnoptixTunnelTpOamMepLmMode | read-write | current | This object indicates the LM packet mode. 0: standard 1: Huawei |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.21 | ColumnoptixTunnelTpOamMepRevTnliIndex | read-write | current | This object indicates the reverse tunnel index. This parameter is applicable only when the tunnel serves as an egress node. When the value is 0xffffffff, the r… |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.22 | ColumnoptixTunnelTpOamMepStandard | read-write | current | This object indicates the OAM protocol standard. 1: 1711,2: 1731 |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.23 | ColumnoptixTunnelTpOamMepGalMode | read-write | current | This parameter indicates the GAL label mode. 0: RFC5586 (13 label) 1: Y.1711 (14 label) |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.24 | ColumnoptixTunnelTpOamMepTSTState | read-write | current | This parameter indicates the sending status of TST packets. 0:stop 1:testing. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.25 | ColumnoptixTunnelTpOamMepRCVPKTNum | read-only | current | This parameter indicates the total number of received TST packets. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.26 | ColumnoptixTunnelTpOamMepSendPKTNum | read-only | current | This parameter indicates the total number of sent TST packets. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.27 | ColumnoptixTunnelTpOamMepMISCRCNum | read-only | current | This parameter indicates the number of received CRC error TST packets. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.28 | ColumnoptixTunnelTpOamMepMISCodeNum | read-only | current | This parameter indicates the number of received TST packets with error codes. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.29 | ColumnoptixTunnelTpOamMepMISOrderNum | read-only | current | This parameter indicates the number of received TST packets with error orders. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.30 | ColumnoptixTunnelTpOamMepClrTSTDir | read-write | current | This parameter indicates the direction in which the TST packet statistical results are deleted. 0: send&receive 1: receive 2: send |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.31 | ColumnoptixTunnelTpOamMepPKTLength | read-write | current | This parameter indicates the length of a TST testing packet. The unit is byte. The value 0xffff indicates that setting the length is invalid. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.32 | ColumnoptixTunnelTpOamMepTimeSpace | read-write | current | This parameter indicates the TST testing interval. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.33 | ColumnoptixTunnelTpOamMepPrio | read-write | current | This parameter indicates the priority of TST testing. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.34 | ColumnoptixTunnelTpOamMepTranskind | read-write | current | This parameter indicates the type of the transfer code. 0:null 1:nullCrc32 2:prbs 3:prbsCrc32. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.35 | ColumnoptixTunnelTpOamMepIsOffOper | read-write | current | This parameter indicates whether TST interrupts services. 0:undisrupt 1:disrupt |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.36 | ColumnoptixTunnelTpOamMepTSTRecvEn | read-write | current | This parameter indicates the receive enable status of TST packets. |
| 1.3.6.1.2.1.10.4.50.4.1.8.1.37 | ColumnoptixTunnelTpOamMepprotocolformat | read-write | current | This object indicates the format of the protocol,1:standard,2:huawei |
| 1.3.6.1.2.1.10.4.50.4.1.9 | TableoptixPWTpOamMepTable | not-accessible | current | Thistable indicates the configuration and management of thePW TP OAM MEPs based on Y.1731. These configurations include the OAM standard, OAM ID, enable status… |
| 1.3.6.1.2.1.10.4.50.4.1.9.1 | RowoptixPWTpOamMepEntry | not-accessible | current | Thisentry indicatesthe parameter table for thePW TP OAM MEPs based on Y.1731. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.1 | ColumnoptixPWTpOamMepIndex | not-accessible | current | This object indicates thePW OAM MEP index, ranging from 1 to 0x00ffffff. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.2 | ColumnoptixPWTpOamMepEnable | read-write | current | This object indicates whether the OAM is enabled. 1: enable 0: disable |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.3 | ColumnoptixPWTpOamMepLevel | read-write | current | This object indicates the MEG level. Default: 7. Valid values range from 0 to 7. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.4 | ColumnoptixPWTpOamMepMegType | read-write | current | This object indicates the identifier type. 1: ip-based 2: icc-based 3: customer-based |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.5 | ColumnoptixPWTpOamMepId | read-write | current | This object indicates the MEP ID. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.6 | ColumnoptixPWTpOamMepPeerId | read-write | current | This object indicates the remote MEP ID. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.7 | ColumnoptixPWTpOamMepCheckWay | read-write | current | This object indicates the OAM detection mode. 1: auto 2: manual |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.8 | ColumnoptixPWTpOamMepCcTime | read-write | current | This object indicates the CC packet period. 1: 3.33 ms 2: 10 ms 3: 100 ms 4: 1s (default) 5: 10s 6: 1 minute 7: 10 minutes |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.9 | ColumnoptixPWTpOamMepCcPri | read-write | current | This object indicates the CC priority. Valid values rang from 0 to 7. 0xff: invalid |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.10 | ColumnoptixPWTpOamMepCcSend | read-write | current | This object indicates the CC start/stop status. 0: stop 1: start |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.11 | ColumnoptixPWTpOamMepSf | read-write | current | This object indicates the SF threshold (packet loss rate). Valid values range from 0 to 100. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.12 | ColumnoptixPWTpOamMepSd | read-write | current | This object indicates the SD threshold (packet loss rate). Valid values range from 0 to 100. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.13 | ColumnoptixPWTpOamMepMegInfo | read-write | current | This object indicates the MEG ID, which is a character string. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.14 | ColumnoptixPWTpOamMepLckEnable | read-write | current | This object indicates the locking status. 1: enable 0: disable |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.15 | ColumnoptixPWTpOamMepLckTime | read-write | current | This object indicates the LCK packet period. 1: 3.3 ms 2: 10 ms 3: 100 ms 4: 1000 ms (1s) 5: 10000 ms (10s) 6: 60000 ms (1 minute) 7: 600000 ms (10 minutes) |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.16 | ColumnoptixPWTpOamMepLckPri | read-write | current | This object indicates the LCK packet priority. Valid values range from 0 to 7. 0xff indicates that the priority is synchronized with the CC packet priority. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.17 | ColumnoptixPWTpOamMepLmMode | read-write | current | This object indicates the LM packet mode. 0: standard 1: huawei |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.18 | ColumnoptixPWTpOamMepPeerLsrId | read-write | current | This object indicates the LSR IDto receive, which is the LSR ID of the valid MPLS device. 0.0.0.0: indicates that the peer IP address ofthe local PW is automat… |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.19 | ColumnoptixPWTpOamMepPeerPwId | read-write | current | This object indicates the remote PW ID, which is a valid MPLS PW ID. 0: indicates that the ID of the local PW is automatically obtained. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.20 | ColumnoptixPWTpOamMepGalEnable | read-write | current | This object indicates the enable status of the GAL label. 1: enable 0: disable |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.21 | ColumnoptixPWTpOamMepStandard | read-write | current | This object indicates the OAM protocol standard  1: 1711 2: 1731 |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.22 | ColumnoptixPWTpOamMepGalMode | read-write | current | This parameter indicates the GAL label mode. 0: RFC5586 (13 label) 1: Y.1711 (14 label) |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.23 | ColumnoptixPWTpOamMepTSTState | read-write | current | This parameter indicates the sending status of TST packets. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.24 | ColumnoptixPWTpOamMepRCVPKTNum | read-only | current | This parameter indicates the total number of received TST packets. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.25 | ColumnoptixPWTpOamMepSendPKTNum | read-only | current | This parameter indicates the total number of sent TST packets. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.26 | ColumnoptixPWTpOamMepMISCRCNum | read-only | current | This parameter indicates the number of received CRC error TST packets. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.27 | ColumnoptixPWTpOamMepMISCodeNum | read-only | current | This parameter indicates the number of received TST packets with error codes. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.28 | ColumnoptixPWTpOamMepMISOrderNum | read-only | current | This parameter indicates the number of received TST packets with error orders. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.29 | ColumnoptixPWTpOamMepClrTSTDir | read-write | current | This parameter indicates the direction in which the TST packet statistical results are deleted. 0: send&receive 1: receive 2: send |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.30 | ColumnoptixPWTpOamMepPKTLength | read-write | current | This parameter indicates the length of a TST testing packet. The unit is byte. The value 0xffff indicates the setting the length is invalid. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.31 | ColumnoptixPWTpOamMepTimeSpace | read-write | current | This parameter indicates the TST testing interval. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.32 | ColumnoptixPWTpOamMepPrio | read-write | current | This parameter indicates the priority of the TST testing. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.33 | ColumnoptixPWTpOamMepTranskind | read-write | current | This parameter indicates the kind of transfer code. 0:null 1:nullCrc32 2:prbs 3:prbsCrc32 |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.34 | ColumnoptixPWTpOamMepIsOffOper | read-write | current | This parameter indicates whether TST interrupts services. 0:undisrupt 1:disrupt. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.35 | ColumnoptixPWTpOamMepTSTRecvEn | read-write | current | This parameter indicates the receive enable status of TST packets. |
| 1.3.6.1.2.1.10.4.50.4.1.9.1.36 | ColumnoptixPWTpOamMepprotocolformat | read-write | current | This object indicates the format of the potocol.1:standard,2:huawei |
| 1.3.6.1.2.1.10.4.50.4.1.10 | TableoptixTunnelTpOamMipTable | not-accessible | current | Thistable indicates the configuration and management of the tunnel TP OAM MIPs based on Y.1731. These configurations include theidentifier type, MEG informatio… |
| 1.3.6.1.2.1.10.4.50.4.1.10.1 | RowoptixTunnelTpOamMipEntry | not-accessible | current | Thisentry indicates theparameter table for the tunnel TP OAM MIPs based on Y.1731. |
| 1.3.6.1.2.1.10.4.50.4.1.10.1.1 | ColumnoptixTunnelTpOamMipIndex | not-accessible | current | This object indicates the tunnel OAM MIP index, ranging from 1 to 0x00ffffff. |
| 1.3.6.1.2.1.10.4.50.4.1.10.1.2 | ColumnoptixTunnelTpOamMipMegType | read-create | current | This object indicates the identifier type. 1: ip-based 2: icc-based 3: customer-based |
| 1.3.6.1.2.1.10.4.50.4.1.10.1.3 | ColumnoptixTunnelTpOamMipMegInfo | read-create | current | This object indicates the MEG ID, which is a character string. |
| 1.3.6.1.2.1.10.4.50.4.1.10.1.4 | ColumnoptixTunnelTpOamMipId | read-create | current | This object indicates the MEP ID. |
| 1.3.6.1.2.1.10.4.50.4.1.10.1.255 | ColumnoptixTunnelTpOamMipRowStatus | read-create | current | This object indicates the row status. 1: active 4: createAndGo 6: destroy |
| 1.3.6.1.2.1.10.4.50.4.1.11 | TableoptixPWTpOamMipTable | not-accessible | current | Thistable indicates the configuration and management of thePW TP OAM MIPs based on Y.1731. These configurations include the identifier type, MEG information, a… |
| 1.3.6.1.2.1.10.4.50.4.1.11.1 | RowoptixPWTpOamMipEntry | not-accessible | current | Thisentry indicates the parameter table for the PW TP OAM MIPs based on Y.1731. |
| 1.3.6.1.2.1.10.4.50.4.1.11.1.1 | ColumnoptixPWTpOamMipIndex | not-accessible | current | This object indicates the PW OAM MIP index, ranging from 1 to 0x00ffffff. |
| 1.3.6.1.2.1.10.4.50.4.1.11.1.2 | ColumnoptixPWTpOamMipMegType | read-create | current | This object indicates the identifier type. 1: ip-based 2: icc-based 3: customer-based |
| 1.3.6.1.2.1.10.4.50.4.1.11.1.3 | ColumnoptixPWTpOamMipMegInfo | read-create | current | This object indicates the MEG ID, which is a character string. |
| 1.3.6.1.2.1.10.4.50.4.1.11.1.4 | ColumnoptixPWTpOamMipId | read-create | current | This object indicates the MIP ID. |
| 1.3.6.1.2.1.10.4.50.4.1.11.1.255 | ColumnoptixPWTpOamMipRowStatus | read-create | current | This object indicates the row status. 1: active 4: createAndGo 6: destroy |
| 1.3.6.1.2.1.10.4.50.4.1.12 | TableoptixTunnelTpOamMepStateTable | not-accessible | current | This object indicates the status query of the tunnel TP OAM MEPs based on Y.1731. |
| 1.3.6.1.2.1.10.4.50.4.1.12.1 | RowoptixTunnelTpOamMepStateEntry | not-accessible | current | This object indicates the status management of the tunnel TP OAM MEPs based on Y.1731. |
| 1.3.6.1.2.1.10.4.50.4.1.12.1.1 | ColumnoptixTunnelTpOamMepDirection | not-accessible | current | For bidirectional tunnels, the status query is performaned in two directions, local and remote end. The query for the tunnel OAM is performed only in one direc… |
| 1.3.6.1.2.1.10.4.50.4.1.12.1.2 | ColumnoptixTunnelTpOamMepState | read-only | current | This object indicates the tunnel OAM status. 0: Thetunnel OAMis in initializing state. 1: The tunnel OAM is available at the local end. 2: The tunnel OAM is av… |
| 1.3.6.1.2.1.10.4.50.4.1.12.1.3 | ColumnoptixTunnelTpOamMepDefectType | read-only | current | This object indicates the defect type of the tunnel OAM. 1: dServer 2: dPeerME 3: dLOCV 4: dTTSI_Mismatch 5: dTTSI_Mismerge 6: dExcess 7: dUnknown 8: dUnExpMeg… |
| 1.3.6.1.2.1.10.4.50.4.1.12.1.4 | ColumnoptixTnlTpOamMepUnavailableTime | read-only | current | This object indicates the unavailable time of the tunnel OAM. The time ranges from 0 to 300,000 ms. 4294967295: invalid |
| 1.3.6.1.2.1.10.4.50.4.1.12.1.5 | ColumnoptixTnlTpOamMepDefectPosition | read-only | current | This object indicates the position of the tunnel defect: node identified by IP addresses. |
| 1.3.6.1.2.1.10.4.50.4.1.13 | TableoptixPWTpOamMepStateTable | not-accessible | current | Thistable is used toquery thestatus of thePW TP OAM MEPs based on Y.1731. |
| 1.3.6.1.2.1.10.4.50.4.1.13.1 | RowoptixPWTpOamMepStateEntry | not-accessible | current | Thisentry indicates the status management of thePW TP OAM MEPs based on Y.1731. |
| 1.3.6.1.2.1.10.4.50.4.1.13.1.1 | ColumnoptixPWTpOamMepDirection | not-accessible | current | For bidirectional MPLS PWs, the status query is performaned in two directions, local and remote ends. ForPW OAM, the status query is performend in single direc… |
| 1.3.6.1.2.1.10.4.50.4.1.13.1.2 | ColumnoptixPWTpOamMepState | read-only | current | This object indicates the PW OAM status. 0: ThePW OAM is in initializing state. 1: ThePW OAM is available at the local end. 2: ThePW OAM is available at the lo… |
| 1.3.6.1.2.1.10.4.50.4.1.13.1.3 | ColumnoptixPWTpOamMepDefectType | read-only | current | This object indicates the defect type of the PW OAM. 1: dServer 2: dPeerME 3: dLOCV 4: dTTSI_Mismatch 5: dTTSI_Mismerge 6: dExcess 7: dUnknown 8: dUnExpMeg 9: … |
| 1.3.6.1.2.1.10.4.50.4.1.13.1.4 | ColumnoptixPWTpOamMepUnavailableTime | read-only | current | This object indicates the unavailable time of thePW OAM. The time ranges from 0 to 300,000 ms. 4294967295: invalid |
| 1.3.6.1.2.1.10.4.50.4.1.13.1.5 | ColumnoptixPWTpOamMepDefectPosition | read-only | current | This object indicates the position of the PW OAM defect: a node identified by IP address. |
| 1.3.6.1.2.1.10.4.50.4.1.14 | TableoptixTunnelTpOamSwitchTable | not-accessible | current | This?table is used to Switch the identifier type of tunnel TP OAM based on Y.1731. |
| 1.3.6.1.2.1.10.4.50.4.1.14.1 | RowoptixTunnelTpOamSwitchEntry | not-accessible | current | This entry is used to Switch the identifier type of tunnel TP OAM based on Y.1731. |
| 1.3.6.1.2.1.10.4.50.4.1.14.1.1 | ColumnoptixTunnelTpOamSwitchMegType | read-write | current | This object indicates the identifier type. 1: ip-based 2: icc-based 3: customer-based Only icc-based and customer-based modes can be configured,ip-based mode C… |
| 1.3.6.1.2.1.10.4.50.4.1.14.1.2 | ColumnoptixTunnelTpOamSwitchMepId | read-write | current | This object indicates the MEP ID. |
| 1.3.6.1.2.1.10.4.50.4.1.14.1.3 | ColumnoptixTunnelTpOamSwitchMepPeerId | read-write | current | This object indicates the remote MEP ID. |
| 1.3.6.1.2.1.10.4.50.4.1.14.1.4 | ColumnoptixTunnelTpOamSwitchMegInfo | read-write | current | This object indicates the MEG ID, which is a character string. In icc-based mode, the MEG ID information is does not surpass 13 Characters. |
| 1.3.6.1.2.1.10.4.50.4.1.15 | TableoptixPWTpOamSwitchTable | not-accessible | current | This?table is used to Switch the identifier type of PW TP OAM based on Y.1731. |
| 1.3.6.1.2.1.10.4.50.4.1.15.1 | RowoptixPWTpOamSwitchEntry | not-accessible | current | This?entry is used to Switch the identifier type of PW TP OAM based on Y.1731. |
| 1.3.6.1.2.1.10.4.50.4.1.15.1.1 | ColumnoptixPWTpOamSwitchMegType | read-write | current | This object indicates the identifier type. 1: ip-based 2: icc-based 3: customer-based Only icc-based and customer-based modes can be configured,ip-based mode C… |
| 1.3.6.1.2.1.10.4.50.4.1.15.1.2 | ColumnoptixPWTpOamSwitchMepId | read-write | current | This object indicates the MEP ID. |
| 1.3.6.1.2.1.10.4.50.4.1.15.1.3 | ColumnoptixPWTpOamSwitchMepPeerId | read-write | current | This object indicates the remote MEP ID. |
| 1.3.6.1.2.1.10.4.50.4.1.15.1.4 | ColumnoptixPWTpOamSwitchMegInfo | read-write | current | This object indicates the MEG ID, which is a character string. In icc-based mode, the MEG ID information is does not surpass 13 Characters. |
| 1.3.6.1.2.1.10.4.50.4.1.16 | NodeoptixMPLSOamTrap | |||
| 1.3.6.1.2.1.10.4.50.4.1.16.1 | NotificationoptixMplsOamLbRsp | current | This object is used to report an LB response event. | |
| 1.3.6.1.2.1.10.4.50.4.1.16.2 | NotificationoptixMplsOamLbOverTime | current | This object is used to report an LB response timeout event. | |
| 1.3.6.1.2.1.10.4.50.4.1.16.3 | NotificationoptixMplsOamLbStat | current | This object is used to report an LB statistics result event. | |
| 1.3.6.1.2.1.10.4.50.4.1.17 | NodeoptixMPLSOamTrapMember | |||
| 1.3.6.1.2.1.10.4.50.4.1.17.1 | ScalaroptixMplsOamMegType | accessible-for-notify | current | This object indicates the MEG type. |
| 1.3.6.1.2.1.10.4.50.4.1.17.2 | ScalaroptixMplsOamIndex | accessible-for-notify | current | This object indicates the index to the tunnel/PW/section. |
| 1.3.6.1.2.1.10.4.50.4.1.17.3 | ScalaroptixMplsOamMepMipId | accessible-for-notify | current | This object indicates the opposite MEP/MIP address or ID. |
| 1.3.6.1.2.1.10.4.50.4.1.17.4 | ScalaroptixMplsOamPktLen | accessible-for-notify | current | This object indicates the number of bytes in a packet. |
| 1.3.6.1.2.1.10.4.50.4.1.17.5 | ScalaroptixMplsOamSeqNum | accessible-for-notify | current | This object indicates the sequence number of a packet. |
| 1.3.6.1.2.1.10.4.50.4.1.17.6 | ScalaroptixMplsOamDelay | accessible-for-notify | current | This object indicates the response time. |
| 1.3.6.1.2.1.10.4.50.4.1.17.7 | ScalaroptixMplsOamTTL | accessible-for-notify | current | This object indicates the TTL of sent packets. |
| 1.3.6.1.2.1.10.4.50.4.1.17.8 | ScalaroptixMplsOamRetCode | accessible-for-notify | current | This object indicates the return code. |
| 1.3.6.1.2.1.10.4.50.4.1.17.9 | ScalaroptixMplsOamSubCode | accessible-for-notify | current | This object indicates the return subcode. |
| 1.3.6.1.2.1.10.4.50.4.1.17.10 | ScalaroptixMplsOamTxNum | accessible-for-notify | current | This object indicates the total number of sent packets. |
| 1.3.6.1.2.1.10.4.50.4.1.17.11 | ScalaroptixMplsOamRxNum | accessible-for-notify | current | This object indicates the total number of received packets. |
| 1.3.6.1.2.1.10.4.50.4.1.17.12 | ScalaroptixMplsOamLoseRate | accessible-for-notify | current | This object indicates the packet loss rate. |
| 1.3.6.1.2.1.10.4.50.4.1.17.13 | ScalaroptixMplsOamMinDelay | accessible-for-notify | current | This object indicates the minimum delay. (unit:us) |
| 1.3.6.1.2.1.10.4.50.4.1.17.14 | ScalaroptixMplsOamMaxDelay | accessible-for-notify | current | This object indicates the maximum delay. (unit:us) |
| 1.3.6.1.2.1.10.4.50.4.1.17.15 | ScalaroptixMplsOamAverDelay | accessible-for-notify | current | This object indicates the average delay. (unit:us) |
| 1.3.6.1.2.1.10.4.50.4.1.17.16 | ScalaroptixMplsOamSaltusNum | accessible-for-notify | current | This object indicates the saltus change number. |
| 1.3.6.1.2.1.10.4.50.4.1.17.17 | ScalaroptixMplsOamSaltusBit | accessible-for-notify | current | This object indicates the saltus change bit. |
| 1.3.6.1.2.1.10.4.50.4.1.17.18 | ScalaroptixMplsOamChangeNum | accessible-for-notify | current | This object indicates the total number of payload change packets. |
| 1.3.6.1.2.1.10.4.50.4.1.18 | TableoptixPWPingTrcRtTable | not-accessible | current | This table manages the PW PING and PW TRACEOUTE configurations including the PW PING start/stop and PW TRACEOUTE start/stop. |
| 1.3.6.1.2.1.10.4.50.4.1.18.1 | RowoptixPWPingTrcRtEntry | not-accessible | current | This entry indicates the parameter table for the PW PING and PW TRACEROUTE. |
| 1.3.6.1.2.1.10.4.50.4.1.18.1.1 | ColumnoptixPWPingTrcRtIndex | not-accessible | current | This object indicates the PW PING or PW TRACEOUTE index ranging from 1 to 0x00ffffff. |
| 1.3.6.1.2.1.10.4.50.4.1.18.1.2 | ColumnoptixPWPingPeerIP | read-write | current | This object indicates the IP address of the peer end that initiates PW PING. |
| 1.3.6.1.2.1.10.4.50.4.1.18.1.3 | ColumnoptixPWPingPeerPwID | read-write | current | This object indicates the PW ID of the peer end that initiates PW PING. |
| 1.3.6.1.2.1.10.4.50.4.1.18.1.4 | ColumnoptixPWPingReqNum | read-write | current | This object indicates the number of Echo Request packets initiating PW PING. Valid values range from 0 to 0xffffffff. The default value is 3. |
| 1.3.6.1.2.1.10.4.50.4.1.18.1.5 | ColumnoptixPWPingExp | read-write | current | This object indicates the EXP value for the transmitted packets. Valid values range from 0 to 7. The default value is 7. |
| 1.3.6.1.2.1.10.4.50.4.1.18.1.6 | ColumnoptixPWPingTTL | read-write | current | This object indicates the TTL value for the transmitted packets (the value indicates the number of attempt hops). Valid values range from 1 to 255. The default… |
| 1.3.6.1.2.1.10.4.50.4.1.18.1.7 | ColumnoptixPWPingSendint | read-write | current | This object indicates the interval at which packets are transmitted. Valid values range from 10 to 1000 with the unit of 10 ms. The default value is 100 (that … |
| 1.3.6.1.2.1.10.4.50.4.1.18.1.8 | ColumnoptixPWPingReplymode | read-write | current | This object indicates the Reply mode. The default value is 2. Valid values are as follows: 1:no response 2: IPv4 UDP response 4: application control channel |
| 1.3.6.1.2.1.10.4.50.4.1.18.1.9 | ColumnoptixPWPingPktlen | read-write | current | This object indicates the length of a transmitted packet. The default value is 84. Valid values range from 84 to 1400. |
| 1.3.6.1.2.1.10.4.50.4.1.18.1.10 | ColumnoptixPWPingTimeOut | read-write | current | This object indicates the timeout period. Valid values range from 50 to 6000 with the unit of 10 ms. The default value is 300 (that is 3s). |
| 1.3.6.1.2.1.10.4.50.4.1.18.1.11 | ColumnoptixPWTrcRtExp | read-write | current | This object indicates the EXP value for the transmitted packets. Valid values range from 0 to 7. The default value is 7. |
| 1.3.6.1.2.1.10.4.50.4.1.18.1.12 | ColumnoptixPWTrcRtTTL | read-write | current | This object indicates the TTL value for the transmitted packets (the value indicates the number of attempt hops). Valid values range from 1 to 255. The default… |
| 1.3.6.1.2.1.10.4.50.4.1.18.1.13 | ColumnoptixPWTrcRtReplymode | read-write | current | This object indicates the Reply mode. The default value is 2. Valid values are as follows: 1:no response 2: IPv4 UDP response 4: application control channel |
| 1.3.6.1.2.1.10.4.50.4.1.18.1.14 | ColumnoptixPWTrcRtPktlen | read-write | current | This object indicates the length of a transmitted packet. The default value is 84. Valid values range from 84 to 1400. |
| 1.3.6.1.2.1.10.4.50.4.1.18.1.15 | ColumnoptixPWTrcRtTimeOut | read-write | current | This object indicates the timeout period. Valid values range from 50 to 6000 with the unit of 10 ms. The default value is 300 (that is 3s). |
| 1.3.6.1.2.1.10.4.50.4.1.18.1.16 | ColumnoptixPWPingTrcRtStop | read-write | current | This object indicates to stop PW PING and PW TRACEROUTE. |
| 1.3.6.1.2.1.10.4.50.4.1.19 | TableoptixMplsTpOamLbTestTable | not-accessible | current | This table describes LB test configurations. |
| 1.3.6.1.2.1.10.4.50.4.1.19.1 | RowoptixMplsTpOamLbTestEntry | not-accessible | current | This entry describes LB test configurations. |
| 1.3.6.1.2.1.10.4.50.4.1.19.1.1 | ColumnoptixMplsTpOamLbTestMegType | not-accessible | current | This object describes the type of the maintenance entity group. |
| 1.3.6.1.2.1.10.4.50.4.1.19.1.2 | ColumnoptixMplsTpOamLbTestIndex | not-accessible | current | This object describes the index of the tunnel OAM MEP. |
| 1.3.6.1.2.1.10.4.50.4.1.19.1.3 | ColumnoptixMplsTpOamLbTestTargetType | read-write | current | This object indicates the target node type. |
| 1.3.6.1.2.1.10.4.50.4.1.19.1.4 | ColumnoptixMplsTpOamLbTestTargetID | read-write | current | This object indicates the target node ID. |
| 1.3.6.1.2.1.10.4.50.4.1.19.1.5 | ColumnoptixMplsTpOamLbTestTTL | read-write | current | This object indicates the time to live of LB test packets. |
| 1.3.6.1.2.1.10.4.50.4.1.19.1.6 | ColumnoptixMplsTpOamLbTestPktNum | read-write | current | This object indicates the number of LB test packets. |
| 1.3.6.1.2.1.10.4.50.4.1.19.1.7 | ColumnoptixMplsTpOamLbTestPktLen | read-write | current | This object indicates the length of LB test packets. |
| 1.3.6.1.2.1.10.4.50.4.1.19.1.8 | ColumnoptixMplsTpOamLbTestSendInt | read-write | current | This object indicates the interval at which LB test packets are transmitted. |
| 1.3.6.1.2.1.10.4.50.4.1.19.1.9 | ColumnoptixMplsTpOamLbTestPri | read-write | current | This object indicates the priority of LB test packets. |
| 1.3.6.1.2.1.10.4.50.4.1.19.1.10 | ColumnoptixMplsTpOamLbTestStop | read-write | current | This object indicates to stop the LB test. |
| 1.3.6.1.2.1.10.4.50.4.1.20 | TableoptixLSPPingTrcRtTable | not-accessible | current | This table indicates LSP PING and LSP TRACEROUTE configurations including the LSP PING start/stop and LSP TRACEOUT start/stop. |
| 1.3.6.1.2.1.10.4.50.4.1.20.1 | RowoptixLSPPingTrcRtEntry | not-accessible | current | This entry indicates the parameter table for the LSP PING and LSP TRACETOURE. |
| 1.3.6.1.2.1.10.4.50.4.1.20.1.1 | ColumnoptixLSPPingTrcRtIndex | not-accessible | current | This object indicates the LSP index. |
| 1.3.6.1.2.1.10.4.50.4.1.20.1.2 | ColumnoptixLSPPingReqNum | read-write | current | This object indicates the number of Echo Request packets for initiating LSP PING. Valid values range from 0 to 0xffffffff. The default value is 3. |
| 1.3.6.1.2.1.10.4.50.4.1.20.1.3 | ColumnoptixLSPPingExp | read-write | current | This object indicates the EXP value for the transmitted packets. Valid values range from 0 to 7. The default value is 7. |
| 1.3.6.1.2.1.10.4.50.4.1.20.1.4 | ColumnoptixLSPPingTTL | read-write | current | This object indicates the TTL value for the transmitted packets (the value indicates the number of attempt hops). Valid values range from 1 to 255. The default… |
| 1.3.6.1.2.1.10.4.50.4.1.20.1.5 | ColumnoptixLSPPingSendint | read-write | current | This object indicates the interval at which packets are transmitted. Valid values range from 10 to 1000 with the unit of 10 ms. The default value is 100 (that … |
| 1.3.6.1.2.1.10.4.50.4.1.20.1.6 | ColumnoptixLSPPingReplymode | read-write | current | This object indicates the Reply mode. The default value is 2. Valid values are as follows: 1:no response 2: IPv4 UDP response 4: application control channel |
| 1.3.6.1.2.1.10.4.50.4.1.20.1.7 | ColumnoptixLSPPingPktlen | read-write | current | This object indicates the length of a transmitted packet. The default value is 64. Valid values range from 64 to 1400. |
| 1.3.6.1.2.1.10.4.50.4.1.20.1.8 | ColumnoptixLSPingTimeOut | read-write | current | This object indicates the timeout period. Valid values range from 50 to 6000 with the unit of 10 ms. The default value is 300 (that is 3s). |
| 1.3.6.1.2.1.10.4.50.4.1.20.1.9 | ColumnoptixLSPTrcRtExp | read-write | current | This object indicates the EXP value for the transmitted packets. Valid values range from 0 to 7. The default value is 7. |
| 1.3.6.1.2.1.10.4.50.4.1.20.1.10 | ColumnoptixLSPTrcRtTTL | read-write | current | This object indicates the TTL value for the transmitted packets (the value indicates the number of attempt hops). Valid values range from 1 to 255. The default… |
| 1.3.6.1.2.1.10.4.50.4.1.20.1.11 | ColumnoptixLSPTrcRtReplymode | read-write | current | This object indicates the Reply mode. The default value is 2. Valid values are as follows: 1:no response 2: IPv4 UDP response 4: application control channel |
| 1.3.6.1.2.1.10.4.50.4.1.20.1.12 | ColumnoptixLSPTrcRtPktlen | read-write | current | This object indicates the length of a transmitted packet. The default value is 64. Valid values range from 64 to 1400. |
| 1.3.6.1.2.1.10.4.50.4.1.20.1.13 | ColumnoptixLSTrcRtTimeOut | read-write | current | This object indicates the timeout period. Valid values range from 50 to 6000 with the unit of 10 ms. The default value is 300 (that is 3s). |
| 1.3.6.1.2.1.10.4.50.4.1.20.1.14 | ColumnoptixLSPPingTrcRtStop | read-write | current | This object indicates to stop PW PING and PW TRACEROUTE. |
| 1.3.6.1.2.1.10.4.50.4.1.21 | ScalaroptixMplsPingRecvSwitch | read-write | current | This object indicates the enable status of the MPLS ping receive function.0:close,1:open |
| 1.3.6.1.2.1.10.4.50.4.1.22 | TableoptixLSPPingExtTrcRtTable | not-accessible | current | This table indicates LSP PING and LSP TRACEROUTE configurations including the LSP PING start/stop and LSP TRACEOUT start/stop. |
| 1.3.6.1.2.1.10.4.50.4.1.22.1 | RowoptixLSPPingExtTrcRtEntry | not-accessible | current | This entry indicates the parameter table for the LSP PING and LSP TRACETOURE. |
| 1.3.6.1.2.1.10.4.50.4.1.22.1.1 | ColumnoptixLSPPingExtTrcRtIndex | not-accessible | current | This object indicates the LSP index. |
| 1.3.6.1.2.1.10.4.50.4.1.22.1.2 | ColumnoptixLSPPingExtReqNum | read-write | current | This object indicates the number of Echo Request packets for initiating LSP PING. Valid values range from 0 to 0xffffffff. The default value is 3. |
| 1.3.6.1.2.1.10.4.50.4.1.22.1.3 | ColumnoptixLSPPingExtExp | read-write | current | This object indicates the EXP value for the transmitted packets. Valid values range from 0 to 7. The default value is 7. |
| 1.3.6.1.2.1.10.4.50.4.1.22.1.4 | ColumnoptixLSPPingExtTTL | read-write | current | This object indicates the TTL value of transmitted packets, which also indicates the number of retry hops. Valid values range from 1 to 255. The default value … |
| 1.3.6.1.2.1.10.4.50.4.1.22.1.5 | ColumnoptixLSPPingExtSendint | read-write | current | This object indicates the interval at which packets are transmitted. Valid values range from 10 to 1000 with the unit of 10 ms. The default value is 100 (that … |
| 1.3.6.1.2.1.10.4.50.4.1.22.1.6 | ColumnoptixLSPPingExtReplymode | read-write | current | This object indicates the Reply mode. The default value is 2. Valid values are as follows: 1:no response 2: IPv4 UDP response 4: application control channel |
| 1.3.6.1.2.1.10.4.50.4.1.22.1.7 | ColumnoptixLSPPingExtPktlen | read-write | current | This object indicates the length of a transmitted packet. The default value is 64. Valid values range from 64 to 1400. |
| 1.3.6.1.2.1.10.4.50.4.1.22.1.8 | ColumnoptixLSPPingExtTimeOut | read-write | current | This object indicates the timeout period. Valid values range from 50 to 6000 with the unit of 10 ms. The default value is 300 (that is 3s). |
| 1.3.6.1.2.1.10.4.50.4.1.22.1.9 | ColumnoptixLSPPingExtBitMode | read-write | current | This object indicates the check mode. 0:not check bit mode,1:all 0 mode,2:all f mode. |
| 1.3.6.1.2.1.10.4.50.4.1.23 | TableoptixPWPingExtTrcRtTable | not-accessible | current | This table manages the PW PING and PW TRACEOUTE configurations including the PW PING start/stop and PW TRACEOUTE start/stop. |
| 1.3.6.1.2.1.10.4.50.4.1.23.1 | RowoptixPWPingExtTrcRtEntry | not-accessible | current | This entry indicates the parameter table for the PW PING and PW TRACEROUTE. |
| 1.3.6.1.2.1.10.4.50.4.1.23.1.1 | ColumnoptixPWPingExtTrcRtIndex | not-accessible | current | This object indicates the PW PING or PW TRACEOUTE index ranging from 1 to 0x00ffffff. |
| 1.3.6.1.2.1.10.4.50.4.1.23.1.2 | ColumnoptixPWPingExtPeerIP | read-write | current | This object indicates the PW ID of the peer end that initiates PW PING. |
| 1.3.6.1.2.1.10.4.50.4.1.23.1.3 | ColumnoptixPWPingExtPeerPwID | read-write | current | This object indicates the PW ID of the peer end that initiates PW PING. |
| 1.3.6.1.2.1.10.4.50.4.1.23.1.4 | ColumnoptixPWPingExtReqNum | read-write | current | This object indicates the number of Echo Request packets initiating PW PING. Valid values range from 0 to 0xffffffff. The default value is 3. |
| 1.3.6.1.2.1.10.4.50.4.1.23.1.5 | ColumnoptixPWPingExtExp | read-write | current | This object indicates the EXP value for the transmitted packets. Valid values range from 0 to 7. The default value is 7. |
| 1.3.6.1.2.1.10.4.50.4.1.23.1.6 | ColumnoptixPWPingExtTTL | read-write | current | This object indicates the TTL value for the transmitted packets (the value indicates the number of attempt hops). Valid values range from 1 to 255. The default… |
| 1.3.6.1.2.1.10.4.50.4.1.23.1.7 | ColumnoptixPWPingExtSendint | read-write | current | This object indicates the interval at which packets are transmitted. Valid values range from 10 to 1000 with the unit of 10 ms. The default value is 100 (that … |
| 1.3.6.1.2.1.10.4.50.4.1.23.1.8 | ColumnoptixPWPingExtReplymode | read-write | current | This object indicates the Reply mode. The default value is 2. Valid values are as follows: 1:no response 2: IPv4 UDP response 4: application control channel. |
| 1.3.6.1.2.1.10.4.50.4.1.23.1.9 | ColumnoptixPWPingExtPktlen | read-write | current | This object indicates the length of a transmitted packet. The default value is 84. Valid values range from 84 to 1400. |
| 1.3.6.1.2.1.10.4.50.4.1.23.1.10 | ColumnoptixPWPingExtTimeOut | read-write | current | This object indicates the timeout period. Valid values range from 50 to 6000 with the unit of 10 ms. The default value is 300 (that is 3s). |
| 1.3.6.1.2.1.10.4.50.4.1.23.1.11 | ColumnoptixPWPingExtBitMode | read-write | current | This object indicates the check mode, 0:not check bit mode,1:all 0 mode,2:all f mode. |
| 1.3.6.1.2.1.10.4.50.4.1.24 | TableoptixMplsTpOamExtLbTestTable | not-accessible | current | This table describes LB test configurations. |
| 1.3.6.1.2.1.10.4.50.4.1.24.1 | RowoptixMplsTpOamExtLbTestEntry | not-accessible | current | This entry describes LB test configurations. |
| 1.3.6.1.2.1.10.4.50.4.1.24.1.1 | ColumnoptixMplsTpOamExtLbTestMegType | not-accessible | current | This object describes the type of the maintenance entity group. |
| 1.3.6.1.2.1.10.4.50.4.1.24.1.2 | ColumnoptixMplsTpOamExtLbTestIndex | not-accessible | current | This object describes the index of the tunnel OAM MEP. |
| 1.3.6.1.2.1.10.4.50.4.1.24.1.3 | ColumnoptixMplsTpOamExtLbTestTargetType | read-write | current | This object indicates the target node type. |
| 1.3.6.1.2.1.10.4.50.4.1.24.1.4 | ColumnoptixMplsTpOamExtLbTestTargetID | read-write | current | This object indicates the target node ID. |
| 1.3.6.1.2.1.10.4.50.4.1.24.1.5 | ColumnoptixMplsTpOamExtLbTestTTL | read-write | current | This object indicates the time to live of LB test packets. |
| 1.3.6.1.2.1.10.4.50.4.1.24.1.6 | ColumnoptixMplsTpOamExtLbTestPktNum | read-write | current | This object indicates the number of LB test packets. |
| 1.3.6.1.2.1.10.4.50.4.1.24.1.7 | ColumnoptixMplsTpOamExtLbTestPktLen | read-write | current | This object indicates the length of LB test packets. |
| 1.3.6.1.2.1.10.4.50.4.1.24.1.8 | ColumnoptixMplsTpOamExtLbTestSendInt | read-write | current | This object indicates the interval at which LB test packets are transmitted. |
| 1.3.6.1.2.1.10.4.50.4.1.24.1.9 | ColumnoptixMplsTpOamExtLbTestPri | read-write | current | This object indicates the priority of LB test packets. |
| 1.3.6.1.2.1.10.4.50.4.1.24.1.10 | ColumnoptixMplsTpOamExtLbTestBitMode | read-write | current | This object indicates the check mode,0:not check bit mode,1:all 0 mode,2:all f mode. |
| 1.3.6.1.2.1.10.4.50.4.2 | NodeoptixMplsTpOamTrap | |||
| 1.3.6.1.2.1.10.4.50.4.2.1 | NodeoptixLspTrapMember | |||
| 1.3.6.1.2.1.10.4.50.4.2.1.1 | ScalaroptixLspPingTrapTunnelIndex | accessible-for-notify | current | This object indicates the index to the tunnel that initiates LSP ping. |
| 1.3.6.1.2.1.10.4.50.4.2.1.2 | ScalaroptixLspPingTrapLsrRspIp | accessible-for-notify | current | This object indicates the IP address of the response LSR. |
| 1.3.6.1.2.1.10.4.50.4.2.1.3 | ScalaroptixLspPingTrapSndPktLen | accessible-for-notify | current | This object indicates the number of bytes in the sent packet. |
| 1.3.6.1.2.1.10.4.50.4.2.1.4 | ScalaroptixLspPingTrapChangeNum | accessible-for-notify | current | This object indicates the total number of payload change packets. |
| 1.3.6.1.2.1.10.4.50.4.2.1.5 | ScalaroptixLspPingTrapDelay | accessible-for-notify | current | This object indicates the response time of the event. Unit:us |
| 1.3.6.1.2.1.10.4.50.4.2.1.6 | ScalaroptixLspPingTrapTTL | accessible-for-notify | current | This object indicates the total length of sent packets. |
| 1.3.6.1.2.1.10.4.50.4.2.1.7 | ScalaroptixLspPingTrapRetCode | accessible-for-notify | current | This object indicates the return code of the event. |
| 1.3.6.1.2.1.10.4.50.4.2.1.8 | ScalaroptixLspPingTrapSubCode | accessible-for-notify | current | This object indicates the subcode of the return code. |
| 1.3.6.1.2.1.10.4.50.4.2.1.9 | ScalaroptixLspPingTrapSeqNum | accessible-for-notify | current | This object indicates the sequence number. |
| 1.3.6.1.2.1.10.4.50.4.2.1.10 | ScalaroptixLspPingTrapTXNum | accessible-for-notify | current | This object indicates the number of transmitted packets. |
| 1.3.6.1.2.1.10.4.50.4.2.1.11 | ScalaroptixLspPingTrapRXNum | accessible-for-notify | current | This object indicates the number of received packets. |
| 1.3.6.1.2.1.10.4.50.4.2.1.12 | ScalaroptixLspPingTrapLossRate | accessible-for-notify | current | This object indicates the packet loss rate. |
| 1.3.6.1.2.1.10.4.50.4.2.1.13 | ScalaroptixLspPingTrapMinDelay | accessible-for-notify | current | This object indicates the minimum delay of LSP ping. Unit: us |
| 1.3.6.1.2.1.10.4.50.4.2.1.14 | ScalaroptixLspPingTrapMaxDelay | accessible-for-notify | current | This object indicates the maximum delay of LSP ping. Unit:us |
| 1.3.6.1.2.1.10.4.50.4.2.1.15 | ScalaroptixLspPingTrapAverageDelay | accessible-for-notify | current | This object indicates the average delay of LSP ping. Unit:us |
| 1.3.6.1.2.1.10.4.50.4.2.1.16 | ScalaroptixLspTrcRtTrapTunnelIndex | accessible-for-notify | current | This object indicates the index to the tunnel that initiates LSP TraceRoute. |
| 1.3.6.1.2.1.10.4.50.4.2.1.17 | ScalaroptixLspTrcRtTrapType | accessible-for-notify | current | This object indicates the type of the response node. |
| 1.3.6.1.2.1.10.4.50.4.2.1.18 | ScalaroptixLspTrcRtTrapDownStreamIp | accessible-for-notify | current | This object indicates the IP address of the downstream node. |
| 1.3.6.1.2.1.10.4.50.4.2.1.19 | ScalaroptixLspTrcRtTrapDownStreamLbl | accessible-for-notify | current | This object indicates the label of the downstream node. |
| 1.3.6.1.2.1.10.4.50.4.2.1.20 | ScalaroptixLspLBTrapIndex | accessible-for-notify | current | This object indicates the LSP index. |
| 1.3.6.1.2.1.10.4.50.4.2.1.21 | ScalaroptixLspPingTrapSrcIp | accessible-for-notify | current | This object indicates the source IP address. |
| 1.3.6.1.2.1.10.4.50.4.2.1.22 | ScalaroptixLspTrcRtTrapSrcIp | accessible-for-notify | current | This object indicates the source IP address. |
| 1.3.6.1.2.1.10.4.50.4.2.1.23 | ScalaroptixLspTrcRtTrapLsrRspIp | accessible-for-notify | current | This object indicates the source IP address. |
| 1.3.6.1.2.1.10.4.50.4.2.1.24 | ScalaroptixLspTrcRtTrapDelay | accessible-for-notify | current | This object indicates the response time of the event. Unit:us |
| 1.3.6.1.2.1.10.4.50.4.2.1.25 | ScalaroptixLspTrcRtTrapTTL | accessible-for-notify | current | This object indicates the total length of sent packets. |
| 1.3.6.1.2.1.10.4.50.4.2.1.26 | ScalaroptixLspTrcRtTrapRetCode | accessible-for-notify | current | This object indicates the return code of the event. |
| 1.3.6.1.2.1.10.4.50.4.2.1.27 | ScalaroptixLspPingTrapSaltusNum | accessible-for-notify | current | This object indicates the saltus change bit. |
| 1.3.6.1.2.1.10.4.50.4.2.1.28 | ScalaroptixLspPingTrapSaltusBit | accessible-for-notify | current | This object indicates the saltus change bit. |
| 1.3.6.1.2.1.10.4.50.4.2.1.29 | ScalaroptixLspPingTrapType | accessible-for-notify | current | This object indicates the ping type. |
| 1.3.6.1.2.1.10.4.50.4.2.2 | NodeoptixLspOamTrapEvent | |||
| 1.3.6.1.2.1.10.4.50.4.2.2.1 | NotificationoptixLspPingRspTrap | current | This object indicates the LSP ping response event. | |
| 1.3.6.1.2.1.10.4.50.4.2.2.2 | NotificationoptixLspPingOvertimeTrap | current | This object indicates the LSP ping response timeout event. | |
| 1.3.6.1.2.1.10.4.50.4.2.2.3 | NotificationoptixLspPingStatisticTrap | current | This object indicates the LSP ping statistics result event. | |
| 1.3.6.1.2.1.10.4.50.4.2.2.4 | NotificationoptixLspTrcRtRspTrap | current | This object indicates the LSP traceroute response event. | |
| 1.3.6.1.2.1.10.4.50.4.2.2.5 | NotificationoptixLspTrcRtRspEndTrap | current | This object indicates the LSP traceroute end event. | |
| 1.3.6.1.2.1.10.4.50.4.2.2.6 | NotificationoptixLspTrcRtOvertimeTrap | current | This object indicates the LSP traceroute response timeout event. | |
| 1.3.6.1.2.1.10.4.50.4.2.2.7 | NotificationoptixLspLBRspTrap | current | This object indicates the unidirectional tunnel LB response event. | |
| 1.3.6.1.2.1.10.4.50.4.2.2.8 | NotificationoptixLspPingNoRspTrap | current | This object indicates the reporting of the LSP PING event in no-reply mode. | |
| 1.3.6.1.2.1.10.4.50.4.2.2.9 | NotificationoptixLspTrcRtNoRspTrap | current | This object indicates the reporting of the LSP TRACEROUTE event in no-reply mode. | |
| 1.3.6.1.2.1.10.4.50.4.3 | NodeoptixMplsTpOamGroup | |||
| 1.3.6.1.2.1.10.4.50.4.3.1 | ScalaroptixMplsPingRecvSwitchext | read-write | current | This object indicates the enable status of the MPLS ping receive function.0:close,1:open |