OPTIX-PKT-ERPS-MIB
74 objects
This mib specifies the MSTP configuration information of device
Imported Objects
| OPTIX-BOARD-MANAGE-MIB | optixLogBoardId optixLogSubCardId |
| OPTIX-OID-MIB | optixProvisionPtn |
| OPTIX-PORT-MANAGE-MIB | optixPortId |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.50.26 | IdentityoptixPktErps | This mib specifies the MSTP configuration information of device | ||
| 1.3.6.1.2.1.10.4.50.26.1 | NodeoptixPktErpsGroup | |||
| 1.3.6.1.2.1.10.4.50.26.1.1 | TableoptixERPSTable | not-accessible | current | This table describes the basicERPS configurations. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1 | RowoptixERPSEntry | not-accessible | current | This entry describes the basicERPS configurations. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.1 | ColumnoptixERPSId | read-only | current | This object indicates the ERPS protocol instance ID. Value range: 1 to 8. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.2 | ColumnoptixERPSEastBoardId | read-create | current | This object indicates the east slot ID of the ERPS. If there is no east port, the slot ID is 0xffff. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.3 | ColumnoptixERPSEastSubboardId | read-create | current | This object indicates the east subboard ID of the ERPS. If there is no subboard, the value is 0xFF. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.4 | ColumnoptixERPSEastPort | read-create | current | This object indicates the east port number of the ERPS. Value range: 1 to MAX_ETH_PORT. If there is no east port, the value is 0xffff. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.5 | ColumnoptixERPSWestBoardId | read-create | current | This object indicates the west slot ID of the ERPS. If there is no west port, the slot ID is 0xffff. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.6 | ColumnoptixERPSWestSubboardId | read-create | current | This object indicates the westsubboard ID of the ERPS. If there is no subboard, the value is 0xFF. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.7 | ColumnoptixERPSWestPort | read-create | current | This object indicates the west port number of the ERPS. Value range: 1 to MAX_ETH_PORT. If there is no west port, the value is 0xffff. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.8 | ColumnoptixERPSRplBoardId | read-create | current | This object indicates the slot ID of the ERPSRPL port. If there is no RPL port, the slot ID is 0xffff. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.9 | ColumnoptixERPSRplSubboardId | read-create | current | This object indicates the subboard ID of the ERPS RPL port. If there is no subboard, the value is 0xFF. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.10 | ColumnoptixERPSRplPort | read-create | current | This object indicates the port number of the ERPS RPL port. Value range: 1 to MAX_ETH_PORT. If there is no RPL port, the value is 0xffff. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.11 | ColumnoptixERPSRplownerFlag | read-create | current | This object indicates whether a node is an RPL owner ring node. 0: none, 1: rplport, 2: rplneigh, 3: rplnextneigh |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.12 | ColumnoptixERPSCtrlVlan | read-create | current | This object indicates the ERPS control VLAN. Value range: 1 to 4094. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.13 | ColumnoptixERPSDmac | read-create | current | This object indicates the ERPS DMAC. Value range: 01-19-A7-00-00-00 to 01-19-A7-00- 00 -FF. The current version uses a fixed value of 01-19-A7-00-00-01. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.14 | ColumnoptixERPSNodeId | read-only | current | This object indicates the current node ID of the ERPS. Value range: 01-19-A7-00-00-00 to 01-19-A7-00- 00 -FF. The current version uses a fixed value of 01-19-A… |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.15 | ColumnoptixERPSHoldoffTime | read-create | current | This object indicates the ERPS delay time. Value range: 0 to 10000 (unit: ms). The default value is 0 and the step length is 100. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.16 | ColumnoptixERPSWtrTime | read-create | current | This object indicates the ERPSWTR time. Value range: 1 to 12 (unit: minute). The default value is 5 and the step length is 1. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.17 | ColumnoptixERPSGuardTime | read-create | current | This object indicates the ERPS guard time. Value range: 10 to 2000 (unit: ms). The default value is 500 and the step length is 10. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.18 | ColumnoptixERPSMel | read-create | current | This object indicates the ERPS MEL. Value range: 0 to 7. The default value is 4. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.19 | ColumnoptixERPSInterval | read-create | current | This object indicates the ERPS packet transmitting interval. Value range: 1 to 10 (unit: s). The default value is 5 and the step length is 1. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.20 | ColumnoptixERPSLastRequest | read-only | current | This object indicates the last ERPS switching request. 1: rapsNr, 2: rapsNrRb, 3: wtrRunning, 4: wtrExpires, 5: rapsSf, 6: localSf, 7: localClrSf, 8: initReque… |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.21 | ColumnoptixERPSRbState | read-only | current | This object indicates the RB status of the ERPS. 0: no RB, 1: RB |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.22 | ColumnoptixERPSDnfState | read-only | current | This object indicates whether the remote request of the ERPS is in DNF state. 0: no DNF, 1: DNF |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.23 | ColumnoptixERPSReceiveNodeId | read-only | current | This object indicates the source node ID of the ERPS switching request, which is an MAC address. Value range: 01-19-A7-00-00-00 to 01-19-A7-00- 00 -FF. The cur… |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.24 | ColumnoptixERPSFsmState | read-only | current | This object indicates the state machine status of the current node of the ERPS. 0: idle, 1: protection, 2: forceswitch, 3: manualswitch, 4: pending |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.25 | ColumnoptixERPSEastPortState | read-only | current | This object indicates the current status of the east port of the ERPS. 0: block, 1: unblock |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.26 | ColumnoptixERPSWestPortState | read-only | current | This object indicates the current status of the west port of the ERPS. 0: block, 1: unblock |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.27 | ColumnoptixERPSvchannelState | read-create | current | This object indicates the enable status of the virtual channel of the ERPS. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.28 | ColumnoptixERPSmajorID | read-create | current | This object indicates the master ring network ID of the ERPS. Value range: 1 to 8. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.29 | ColumnoptixERPSVerId | read-create | current | This object indicates the version of the ERPS. 1: ver1, 2: ver2 |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.30 | ColumnoptixERPSRvtMode | read-create | current | This object indicates revert mode of the ERPS. 0: norvt, 1: rvt |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.31 | ColumnoptixERPSSWCMode | read-create | current | This object indicates the external switch mode of the ERPS,but the getting operator is invalid,assigning it 255. 0: clear, 1: mseast, 2: mswest, 3: fseast, 4: … |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.32 | ColumnoptixERPSVchannelIdNum | read-create | current | This object indicates the number of the VLAN ID of the ERPS. Value range: 0 to 255. The value 0 indicates that all VLANs are deleted. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.33 | ColumnoptixERPSVchannelIdList | read-create | current | This object indicates the VLAN List of the ERPS. Value range: 1 to 4094. & is used to separate multiple VLANs. For example, 1 & 2 & 3 |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.34 | ColumnoptixERPSEastSendMSGNum | not-accessible | current | This object indicates the number of East send message of the ERPS. Value range: 0 to 0xffffffff. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.35 | ColumnoptixERPSWestSendMSGNum | not-accessible | current | This object indicates the number of West send message of the ERPS. Value range: 0 to 0xffffffff. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.36 | ColumnoptixERPSEastReceiveMSGNum | not-accessible | current | This object indicates the number of East receive message of the ERPS. Value range: 0 to 0xffffffff. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.37 | ColumnoptixERPSWestReceiveMSGNum | not-accessible | current | This object indicates the number of West receive message of the ERPS. Value range: 0 to 0xffffffff. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.38 | ColumnoptixERPSEastReceiveErrMSGNum | not-accessible | current | This object indicates the number of East send error message of the ERPS. Value range: 0 to 0xffffffff. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.39 | ColumnoptixERPSWestReceiveErrMSGNum | not-accessible | current | This object indicates the number of West send error message of the ERPS. Value range: 0 to 0xffffffff. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.40 | ColumnoptixERPSCLrMSGStatic | not-accessible | current | This object indicates clearing the message of the ERPS,but the getting operator is invalid,assigning it 255. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.41 | ColumnoptixERPSDebugWtrTime | not-accessible | current | This object indicates debugging the waiting for resuming time of the ERPS. Value range: 1 to 65535 (unit: s). The default value is 300. |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.42 | ColumnoptixERPSEthType | read-create | current | This object indicates the ETH type of the ERPS. 0x8809: transmission mode, 0x8902: standard mode |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.43 | ColumnoptixERPSLoopDetect | read-create | current | This object indicates the state of loop detect of the ERPS. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.44 | ColumnoptixERPSRingRole | read-create | current | This object indicates the ring role of the ERPS. 255: unknown, 1: major,2:sub |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.45 | ColumnoptixERPSInternode | read-create | current | This parameter indicates the interconnection attribute of current node ID of ERPS . |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.46 | ColumnoptixERPSMultifailure | read-create | current | This parameter indicates the multifailure attribute of current node ID of ERPS . |
| 1.3.6.1.2.1.10.4.50.26.1.1.1.255 | ColumnoptixERPSRowStatus | read-create | current | This object indicates the row status of the ERPS. |
| 1.3.6.1.2.1.10.4.50.26.1.2 | NodeoptixL2ErpsStateChangeEvent | |||
| 1.3.6.1.2.1.10.4.50.26.1.2.1 | NotificationoptixL2ErpsStateChange | current | This object is used to report ERPS switching events. | |
| 1.3.6.1.2.1.10.4.50.26.1.3 | TableoptixERPSVchannelTable | not-accessible | current | This table describes the basic ERPS V-channel configurations. |
| 1.3.6.1.2.1.10.4.50.26.1.3.1 | RowoptixERPSVchannelEntry | not-accessible | current | This entry describes the basic ERPS V-channel configurations. |
| 1.3.6.1.2.1.10.4.50.26.1.3.1.1 | ColumnoptixERPSVchannelId | not-accessible | current | This object indicates the ERPS V-channel ID. Value range: 1 to 4094. |
| 1.3.6.1.2.1.10.4.50.26.1.3.1.255 | ColumnoptixERPSVchannelRowStatus | read-only | current | This object indicates the row status of the ERPS V-channel. |
| 1.3.6.1.2.1.10.4.50.26.1.4 | TableoptixERPSVlanTable | not-accessible | current | This table describes the basic ERPS VLAN configurations. |
| 1.3.6.1.2.1.10.4.50.26.1.4.1 | RowoptixERPSVlanEntry | not-accessible | current | This entry describes the basic ERPS VLAN configurations. |
| 1.3.6.1.2.1.10.4.50.26.1.4.1.1 | ColumnoptixERPSSubVlanID | not-accessible | current | This object indicates the ERPS sub-VLAN ID. Value range: 1 to 4094. |
| 1.3.6.1.2.1.10.4.50.26.1.4.1.2 | ColumnoptixERPSMainErpsID | read-create | current | This object indicates the master ring network protocol ID of theERPS. Value range: 1 to 8. |
| 1.3.6.1.2.1.10.4.50.26.1.4.1.3 | ColumnoptixERPSMainVlanID | read-create | current | This object indicates the master ERPS VLAN ID. Value range: 1 to 4094. |
| 1.3.6.1.2.1.10.4.50.26.1.4.1.255 | ColumnoptixERPSVlanRowStatus | read-create | current | This object indicates the row status of the ERPS VLAN. |
| 1.3.6.1.2.1.10.4.50.26.1.5 | TableoptixPktErpsMepTable | not-accessible | current | This table describes the basic configurations of the association between ERPS and MEP. |
| 1.3.6.1.2.1.10.4.50.26.1.5.1 | RowoptixPktErpsMepEntry | not-accessible | current | This entry describes the basic configurations of the association between ERPS and MEP. |
| 1.3.6.1.2.1.10.4.50.26.1.5.1.1 | ColumnoptixPktErpsMepNum | read-write | current | This parameter indicates the number of the associations between one ERPS and many MEPs. |
| 1.3.6.1.2.1.10.4.50.26.1.5.1.2 | ColumnoptixPktErpsMepInfo | read-write | current | This object indicates ERPS-related MEP information, including the MDID, MAID, and MEPID. |
| 1.3.6.1.2.1.10.4.50.26.1.6 | TableoptixMultiInsERPSTable | not-accessible | current | This table describes the basic multi-instance ERPS configurations. |
| 1.3.6.1.2.1.10.4.50.26.1.6.1 | RowoptixMultiInsERPSEntry | not-accessible | current | This entry describes the basic multi-instance ERPS configurations. |
| 1.3.6.1.2.1.10.4.50.26.1.6.1.1 | ColumnoptixMultiInsERPSServiceVlanIdNum | read-create | current | This object indicates the number of service VLAN IDs of the multi-instance ERPS. Value range: 0 to 1024. The value 0 indicates that ERPS protects whole ports. |
| 1.3.6.1.2.1.10.4.50.26.1.6.1.2 | ColumnoptixMultiInsERPSServiceVlanIdList | read-create | current | This object indicates the service VLAN list of the multi-instance ERPS. Value range: 1 to 4094. & is used to separate multiple service VLANs. For example, … |
| 1.3.6.1.2.1.10.4.50.26.1.6.1.3 | ColumnoptixMultiInsERPSServiceVlanIdListToBeAdded | read-create | current | This object indicates the service VLAN list to be added to the multi-instance ERPS. Value range: 1 to 4094. & is used to separate multiple service VLANs. F… |
| 1.3.6.1.2.1.10.4.50.26.1.6.1.4 | ColumnoptixMultiInsERPSServiceVlanIdListToBeDeleted | read-create | current | This object indicates the service VLAN list to be deleted from the multi-instance ERPS. Value range: 1 to 4094. & is used to separate multiple service VLAN… |
| 1.3.6.1.2.1.10.4.50.26.1.6.1.255 | ColumnoptixMultiInsERPSRowStatus | read-create | current | This object indicates the row status of the mulit-instance ERPS. |