MIB Viewer

OPTIX-PKT-LMSP-MIB

45 objects
This mib specifies configuration information of LMSP
Imported Objects
OPTIX-OID-MIBoptixProvisionPtn
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime RowStatus
OIDNameAccessStatusDescription
1.3.6.1.2.1.10.4.50.28IdentityoptixPktLmspThis mib specifies configuration information of LMSP
1.3.6.1.2.1.10.4.50.28.1NodeoptixPktLmspGroup
1.3.6.1.2.1.10.4.50.28.1.1TableoptixPktLmspgTablenot-accessiblecurrentThis table describes the LMSP group configurations.
1.3.6.1.2.1.10.4.50.28.1.1.1RowoptixPktLmspgEntrynot-accessiblecurrentThis entry describes the LMSP group configurations.
1.3.6.1.2.1.10.4.50.28.1.1.1.1ColumnoptixPktLmspgidnot-accessiblecurrentThis object indicates the LMSP group ID.
1.3.6.1.2.1.10.4.50.28.1.1.1.2ColumnoptixPktLmspProtectTyperead-createcurrentThis object indicates the LMSP protection type. 0: SNMP 1+1, 1: SNMP 1:N
1.3.6.1.2.1.10.4.50.28.1.1.1.3ColumnoptixPktLmspWorkChnNumread-createcurrentThis object indicates the number of LMSP working channels. For 1+1 protection, the value is 1. For 1:N protection, the value is N (1 ~ 14).
1.3.6.1.2.1.10.4.50.28.1.1.1.4ColumnoptixPktLmspOPModeread-createcurrentThis object indicates the LMSP operation mode. 0: uniend, 1: biend
1.3.6.1.2.1.10.4.50.28.1.1.1.5ColumnoptixPktLmspActiveFlagread-onlycurrentThis object indicates the LMSP activation flag. 1: adding, 2: deleting, 3: active
1.3.6.1.2.1.10.4.50.28.1.1.1.6ColumnoptixPktLmspSDFlagread-createcurrentThis object indicates the enable status of the LMSP SD switching. 0: disable, 1: enable
1.3.6.1.2.1.10.4.50.28.1.1.1.7ColumnoptixPktLmspRvtModeread-createcurrentThis object indicates the LMSPrevertion mode. 0: norvt, 1: rvt
1.3.6.1.2.1.10.4.50.28.1.1.1.8ColumnoptixPktLmspSWModeread-createcurrentThis object indicates the LMSPsingle-/dual-ended mode. 0: uniend, 1: biend
1.3.6.1.2.1.10.4.50.28.1.1.1.9ColumnoptixPktLmspProtocolTyperead-createcurrentThis object indicates the LMSP protocol type. 0: old, 1: new, 2: restruct
1.3.6.1.2.1.10.4.50.28.1.1.1.10ColumnoptixPktLmspHoldOffTimeread-createcurrentThis object indicates the LMSP switching delay time.
1.3.6.1.2.1.10.4.50.28.1.1.1.11ColumnoptixPktLmspSfSdLevelread-createcurrentThis object indicates the LMSP SD/SF priority. 0: kHigh, 1: kLow
1.3.6.1.2.1.10.4.50.28.1.1.1.12ColumnoptixPktLmspK2Stateread-createcurrentThis object indicates the switching mode of the last three bits of the LMSP K2 byte. 0: noindicate, 1: indicate
1.3.6.1.2.1.10.4.50.28.1.1.1.13ColumnoptixPktLmspWtrTimeread-createcurrentThis object indicates the WTR time of the LMSP group.
1.3.6.1.2.1.10.4.50.28.1.1.1.14ColumnoptixPktLmspActiveStateread-createcurrentThis object indicates the LMSP activation status. 0: noactve, 1: active
1.3.6.1.2.1.10.4.50.28.1.1.1.15ColumnoptixPktLmspStartFlagread-createcurrentThis object indicates the start flag of the LMSP group. 0: protocolStop, 1: protocolStart
1.3.6.1.2.1.10.4.50.28.1.1.1.16ColumnoptixPktEventread-createcurrentThis object indicates the event of LMSP.
1.3.6.1.2.1.10.4.50.28.1.1.1.255ColumnoptixPktLmspgRowStatusread-createcurrentThis object indicates the row status of the LMSP group.
1.3.6.1.2.1.10.4.50.28.1.2TableoptixPktLmspEventTablenot-accessiblecurrentThis table describes the configurations of the LMSP group event.
1.3.6.1.2.1.10.4.50.28.1.2.1RowoptixPktLmspEventEntrynot-accessiblecurrentThis entry describes the configurations of the LMSP group event.
1.3.6.1.2.1.10.4.50.28.1.2.1.1ColumnoptixPktLmspHisSwitchEventIDnot-accessiblecurrentThis object indicates the number of the historical LMSP switching events. Value range: 1 to 65535.
1.3.6.1.2.1.10.4.50.28.1.2.1.2ColumnoptixPktLmspHisSwitchEventValueread-onlycurrentThis object indicates the value of the historical LMSP switching event. 1: kSends, 2: kDir, 5: getK, 6: rstApsc, 7: stateTrans, 8: kReceived, 9: sfClears, 10: …
1.3.6.1.2.1.10.4.50.28.1.2.1.3ColumnoptixPktLmspHisSwitchEventPararead-onlycurrentThis object indicates the parameter of the historical LMSP switching event.
1.3.6.1.2.1.10.4.50.28.1.2.1.4ColumnoptixPktLmspHisSwitchTimeread-onlycurrentThis object indicates the date of the historical switching event.
1.3.6.1.2.1.10.4.50.28.1.2.1.5ColumnoptixPktLmspHisSwitchTimeStampread-onlycurrentThis object indicates the time stamp of the historical LMSP switching event.
1.3.6.1.2.1.10.4.50.28.1.3TableoptixPktLmspuTablenot-accessiblecurrentThis table describes the configurations of LMSPprotection units.
1.3.6.1.2.1.10.4.50.28.1.3.1RowoptixPktLmspuEntrynot-accessiblecurrentThis entry describes the configurations of LMSPprotection units.
1.3.6.1.2.1.10.4.50.28.1.3.1.1ColumnoptixPktLmspuidnot-accessiblecurrentThis object indicates the LMSPprotection unitID. Value range: 1 to 255 (based on the number of linear MSs supported by the NE).
1.3.6.1.2.1.10.4.50.28.1.3.1.2ColumnoptixPktLmspSwitchRequestread-onlycurrentThis object indicates the LMSP switching request. 240: lpsLp, 224: lpsFs, 208: lpsSf, 192: lpsSfLow, 176: lpsSd, 160: lpsSdLow, 128: lpsMs, 96: lpsWtr, 64: lps…
1.3.6.1.2.1.10.4.50.28.1.3.1.3ColumnoptixPktLmspSwitchStateread-onlycurrentThis object indicates the LMSP switching status. 0: stop, 255: starting, 1: I, 4: s
1.3.6.1.2.1.10.4.50.28.1.3.1.4ColumnoptixPktLmspReqSiteread-onlycurrentThis object indicates the LMSP remote/local end. 1: near, 2: far
1.3.6.1.2.1.10.4.50.28.1.3.1.5ColumnoptixPktLmspExtSwitchCmdread-createcurrentThis object indicates the LMSP external switching cmd. 15: lmsLock, 31: lmsUnlock, 14: lmsForce, 30: lmsForceclr, 8: lmsMan, 24: lmsManclr, 4: lmsExer, 20: lms…
1.3.6.1.2.1.10.4.50.28.1.3.1.255ColumnoptixPktLmspuRowStatusread-createcurrentThis object indicates the row status of the LMSP protection unit.
1.3.6.1.2.1.10.4.50.28.1.4TableoptixPktLmspAu4Tablenot-accessiblecurrentThis table describes the LMSP group Au4 configurations.
1.3.6.1.2.1.10.4.50.28.1.4.1RowoptixPktLmspAu4Entrynot-accessiblecurrentThis entry describes the LMSP group Au4 configurations.
1.3.6.1.2.1.10.4.50.28.1.4.1.1ColumnoptixPktLmspBoardIdread-createcurrentThis object indicates the slot ID of the LMSP protection unit mapping. Value range: 1 to 65535 (based on the number of boards supported by the NE).
1.3.6.1.2.1.10.4.50.28.1.4.1.2ColumnoptixPktLmspSubIdread-createcurrentThis object indicates the subboard ID of the LMSP protection unit mapping. Value range: 1 to 255. If the NE does not support subboards, the value is 255.
1.3.6.1.2.1.10.4.50.28.1.4.1.3ColumnoptixPktLmspPortIdread-createcurrentThis object indicates the port number of the LMSP protection unit mapping. Value range: 1 to 65535 (based on the number of ports supported by the board).
1.3.6.1.2.1.10.4.50.28.1.4.1.4ColumnoptixPktLmspPumapread-createcurrentThis object indicates the LMSP protection unit mapping.
1.3.6.1.2.1.10.4.50.28.1.4.1.255ColumnoptixPktLmspAu4RowStatusread-createcurrentThis object indicates the row status of the LMSP protection unit Au4.
1.3.6.1.2.1.10.4.50.28.2NodeoptixPktLmspNEGroup
1.3.6.1.2.1.10.4.50.28.2.1ScalaroptixPktLmspVerfiyread-writecurrentThis object describes the verify pkt lmsp. 0: invalid, 1: verify