OPTIX-PKT-PTPCLOCK-MIB
155 objects
this mib describes configuration of 1588 clock mode
Imported Objects
| OPTIX-BOARD-MANAGE-MIB | optixLogBoardId optixLogSubCardId |
| OPTIX-L2VPN-MIB | optixEthSrvIndex |
| OPTIX-OID-MIB | optixProvisionPtn |
| OPTIX-PORT-MANAGE-MIB | optixPortId |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.50.13 | IdentityoptixPktptpclock | this mib describes configuration of 1588 clock mode | ||
| 1.3.6.1.2.1.10.4.50.13.1 | NodeoptixPktPtpClockGroup | |||
| 1.3.6.1.2.1.10.4.50.13.1.1 | ScalaroptixPktPtpStaticBMCState | read-write | current | this parameter describes static BMCs enabled status. 0 disable, 1 enable |
| 1.3.6.1.2.1.10.4.50.13.1.2 | ScalaroptixPktPtpMode | read-write | current | This parameter describes the PTP working mode of an NE. 1: oc; 2: bc; 3: tc; 5: tcBc; 6: tbc |
| 1.3.6.1.2.1.10.4.50.13.1.3 | ScalaroptixPktPtpDomain | read-write | current | this parameter describes the PTP Domain of NE. Value range 0 to 255. The default value is 0. |
| 1.3.6.1.2.1.10.4.50.13.1.4 | ScalaroptixPktPtpTimeSrcIdHigh | read-only | current | this parameter describes the PTPs source IDs high part. Clock source ID generation rule The first three bytes are the OUI code. The following four bytes are th… |
| 1.3.6.1.2.1.10.4.50.13.1.5 | ScalaroptixPktPtpTimeSrcIdLow | read-only | current | this parameter describes the PTPs source IDs low part. Clock source ID generation rule The first three bytes are the OUI code. The following four bytes are the… |
| 1.3.6.1.2.1.10.4.50.13.1.6 | ScalaroptixPktPtpSrcMode | read-write | current | This parameter describes the mode of selecting system frequency sources. 1 Physical clock, 2 PTP, 3 PTP ACR UNI |
| 1.3.6.1.2.1.10.4.50.13.1.7 | ScalaroptixPktPtpSrcTimeYear | read-write | current | this parameter describes the PTPs system year. Value range 2000 to 2099. |
| 1.3.6.1.2.1.10.4.50.13.1.8 | ScalaroptixPktPtpSrcTimeMonth | read-write | current | this parameter describes the PTPs system month. Value range 1 to 12. |
| 1.3.6.1.2.1.10.4.50.13.1.9 | ScalaroptixPktPtpSrcTimeDay | read-write | current | this parameter describes the PTPs system day. Value range 1 to 31. |
| 1.3.6.1.2.1.10.4.50.13.1.10 | ScalaroptixPktPtpSrcTimeHour | read-write | current | this parameter describes the PTPs system hour. Value range 0 to 59. |
| 1.3.6.1.2.1.10.4.50.13.1.11 | ScalaroptixPktPtpSrcTimeMinute | read-write | current | this parameter describes the PTPs system minute. Value range 0 to 59. |
| 1.3.6.1.2.1.10.4.50.13.1.12 | ScalaroptixPktPtpSrcTimeSecond | read-write | current | this parameter describes the PTPs system second. Value range 0 to 64. |
| 1.3.6.1.2.1.10.4.50.13.1.13 | ScalaroptixPktPtpSlaveOnlyMode | read-write | current | this parameter describes the NEs mode of SLAVEONLY. 1 slaveOnly, 2 nonSlaveOnly |
| 1.3.6.1.2.1.10.4.50.13.1.14 | ScalaroptixPktPtpGrandMasterBid | read-only | current | this parameter describes the main clocks board ID that being tailed. Value range 1 to all Fs. |
| 1.3.6.1.2.1.10.4.50.13.1.15 | ScalaroptixPktPtpGrandMasterSbid | read-only | current | this parameter describes the main clocks subcard ID that being tailed. Value range 1 to all Fs. |
| 1.3.6.1.2.1.10.4.50.13.1.16 | ScalaroptixPktPtpGrandMasterPid | read-only | current | this parameter describes the main clocks port ID that being tailed. Value range 1 to all Fs. |
| 1.3.6.1.2.1.10.4.50.13.1.17 | ScalaroptixPktPtpGrandMasterGrandmasterID1 | read-only | current | this parameter describes the main clocks low randmaster ID1. Clock source ID generation rule The first three bytes are the OUI code. The following four bytes a… |
| 1.3.6.1.2.1.10.4.50.13.1.18 | ScalaroptixPktPtpGrandMasterGrandmasterID2 | read-only | current | this parameter describes the main clocks high randmaster ID2. Clock source ID generation rule The first three bytes are the OUI code. The following four bytes … |
| 1.3.6.1.2.1.10.4.50.13.1.19 | ScalaroptixPktPtpWTR | read-write | current | this parameter describes the time of 1588 WTR. Value range 0 to 12 (unit minute). The default value is 5 and the step length is 1. |
| 1.3.6.1.2.1.10.4.50.13.1.20 | ScalaroptixPktPtpTimeEnableState | read-write | current | this parameter describes the NEs time adjusting enable state. 0 close, 1 open |
| 1.3.6.1.2.1.10.4.50.13.1.21 | ScalaroptixPktPtpInfoMode | read-write | current | This parameter describes the NE PTP message multicast mode. 1 multicast, 2 partlyMulticast |
| 1.3.6.1.2.1.10.4.50.13.1.22 | TableoptixPktPtpClockTable | not-accessible | current | this table describes the configuration message of 1588 clock mode |
| 1.3.6.1.2.1.10.4.50.13.1.22.1 | RowoptixPktPtpClockEntry | not-accessible | current | this entry describes the configuration message of 1588 clock mode |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.1 | ColumnoptixPktPtpClockPhyPortId | not-accessible | current | this parameter describes the physical ports ID of 1588 mode |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.2 | ColumnoptixPktPtpClockPortManState | read-write | current | this parameter describes the state of PTP port. 1 initializing, 2 faulty, 3 disabled, 4 listening, 5 preMaster, 6 master, 7 passive, 8 uncalibrated, 9 slave, 2… |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.3 | ColumnoptixPktPtpClockPortState | read-write | current | this parameter describes the enabled state of PTP clock port. 0 disable, 1 enable |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.4 | ColumnoptixPktPtpClockAnnounceCycle | read-write | current | this parameter describes the announce packet period of PTP clock port. Value range 0 to 20. The mapping relationship is as follows 0 1/1024s 1 2/1024s (1/512s)… |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.5 | ColumnoptixPktPtpClockSyncCycle | read-write | current | this parameter describes the SYNC packet period of PTP clock port. Value range 0 to 20. The mapping relationship is as follows 0 1/1024s 1 2/1024s (1/512s) 2 4… |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.6 | ColumnoptixPktPtpClockDelayCycle | read-write | current | this parameter describes the DELAY packet period of PTP clock port. Value range 0 to 20. The mapping relationship is as follows 0 1/1024s 1 2/1024s (1/512s) 2 … |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.7 | ColumnoptixPktPtpClockPdelayCycle | read-write | current | this parameter describes the PDELAY packet period of PTP clock port. Value range 0 to 20. The mapping relationship is as follows 0 1/1024s 1 2/1024s (1/512s) 2… |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.8 | ColumnoptixPktPtpClockAnnounceTimeout | read-write | current | This parameter describes the timeout interval of port announce diagram. |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.9 | ColumnoptixPktPtpClockVlan | read-write | current | this parameter describes the VLAN value of PTP packet |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.10 | ColumnoptixPktPtpClockPrewiredPortState | read-write | current | this parameter describes the preselection status of PTP clock. 0 masterSlave, 1 master, 2 slave |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.11 | ColumnoptixPktPtpClockPEMode | read-write | current | this parameter describes the P/E mode of PTP clock. 1 p2p, 2 e2e |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.12 | ColumnoptixPktPtpClockHighBit | read-only | current | this parameter describes the high bit of received source PTP clock. Value range 1 to 0xfffffff. The defaut value is all Fs. |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.13 | ColumnoptixPktPtpClockLowBit | read-only | current | this parameter describes the low bit of received source PTP clock |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.14 | ColumnoptixPktPtpClockInterfaceNo | read-only | current | this parameter describes the interface NO of the PTP port that receive source clock. Value range 1 to 0xfffffff. The defaut value is all Fs. |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.15 | ColumnoptixPktPtpClockLinkState | read-only | current | this parameter describes the link state of the PTP port that receive source clock. 1 up, 0 down |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.16 | ColumnoptixPktPtpClockMsgFormat | read-write | current | this parameter describes the encapsulated format of PTP packeting. 1 ptpeth, 2 ptpip |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.17 | ColumnoptixPktPtpClockRefClkIDHigh | read-write | current | this parameter describes the high bit of higher priority of PTP clock that for reference. Value range 1 to 0xffffffff. The default value is all Fs. |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.18 | ColumnoptixPktPtpClockRefClkIDLow | read-write | current | this parameter describes the high bit of lower priority of PTP clock that for reference. Value range 1 to 0xffffffff. The default value is all Fs. |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.19 | ColumnoptixPktPtpClockRecClkNo | read-write | current | this parameter describes the interface NO of port that reveive clock. Value range 1 to 0xffff. The default value is all Fs. |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.20 | ColumnoptixPktPtpClockExtInterfaceMode | read-write | current | this parameter describes the PTP ports mode of external interface. 1 extClock, 2 extTime |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.21 | ColumnoptixPktPtpClockINorOUT | read-write | current | this parameter describes the direction(IN or OUT) of PTP clock port. 1 in, 2 out |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.22 | ColumnoptixPktPtpClockTimeProtocolType | read-write | current | this parameter describes the protocol style of PTP clock. 1 dcls, 2 oneppsTime, 3 j211 |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.23 | ColumnoptixPktPtpClockElectricalLevel | read-write | current | this parameter describes the electrical level of PTP clock. 3 rs422, 255 snmpnull |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.24 | ColumnoptixPktPtpClockQulityOfTime | read-write | current | This parameter describes the time quality degree of a PTP clock. |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.25 | ColumnoptixPktPtpClockPrecision | read-write | current | This parameter describes the time precision accuracy of a PTP clock. |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.26 | ColumnoptixPktPtpClockSrcType | read-write | current | This parameter describes the type of the source PTP clock. 1 ATOMICCLOCK, 2 GPS, 3 TerrestrialRadio, 4 PTP, 5 NTP, 6 HANDSET, 7 OTHER, 8 Internaloscillator |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.27 | ColumnoptixPktPtpClockPriority1 | read-write | current | This parameter describes priority 1 of a PTP port. Value range: 0 to 255. |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.28 | ColumnoptixPktPtpClockPriority2 | read-write | current | This parameter describes priority 2 of a PTP port. Value range: 0 to 255. |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.29 | ColumnoptixPktPtpClockRealState | read-only | current | this parameter describes the real state of PTP port. 1 initializing, 2 faulty, 3 disabled, 4 listening, 4 preMaster, 6 master, 7 passive, 8 uncalibrated, 9 sla… |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.30 | ColumnoptixPktPtpClockWarpMode | read-write | current | This parameter describes the divergence mode of a PTP port. 0: length; 1: time. The default value is length. |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.31 | ColumnoptixPktPtpClockWarpDirection | read-write | current | This parameter describes the divergence direction of a PTP port. 0: positive; 1: negative. The default value is positive. |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.32 | ColumnoptixPktPtpClockWarpValue | read-write | current | This parameter describes the divergence value of a PTP port. Value range for the length mode: 0 to 54000 (unit m).The default value is 0. Value range for the t… |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.33 | ColumnoptixPktPtpClockStep | read-write | current | this parameter describes the ports PTP STEP mode. 1 ONESTEP, 2 TWOSTEP. The default value is ONESTEP. Note The FO supports only ONESTEP. That is, the GSP suppo… |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.34 | ColumnoptixPktPtpClockPortMode | read-write | current | this parameter describes the ports 1588 mode. 1 oc, 2 bc, 3 tc, 5 tcBc |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.35 | ColumnoptixPktPtpClockAcrState | read-write | current | this parameter describes the ports enable status of 1588 ACR. 0 disable, 1 enable |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.36 | ColumnoptixPktPtpClockTimeLevelMode | read-write | current | this parameter describes the time level of external time interface. 1 manual, 2 auto |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.37 | ColumnoptixPktPtpCableLengthDirRec | read-write | current | this parameter describes the received direction(IN or OUT) of external cable. 0 receive, 1 send |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.38 | ColumnoptixPktPtpCableLengthModeRec | read-write | current | this parameter describes the received direction(IN or OUT) of external cable in in transmission length mode. 0 length, 1 time |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.39 | ColumnoptixPktPtpCableLengthValueRec | read-write | current | this parameter describes the received direction(IN or OUT) of external cable in length value |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.40 | ColumnoptixPktPtpCableLengthDirSend | read-write | current | this parameter describes the sent direction(IN or OUT) of external cable. 0 receive, 1 send |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.41 | ColumnoptixPktPtpCableLengthModeSend | read-write | current | this parameter describes the sent direction(IN or OUT) of external cable in transmission length mode. 0 length, 1 time |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.42 | ColumnoptixPktPtpCableLengthValueSend | read-write | current | this parameter describes the sent direction(IN or OUT) of external cable in transmission length mode |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.43 | ColumnoptixPktPtpPortVlanPri | read-write | current | this parameter describes Vlan Priority with the PTP message. |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.44 | ColumnoptixPktPtpClockLocalPriority | read-write | current | This parameter describes the local priority of a PTP clock. |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.45 | ColumnoptixPktPtpClockNotSlave | read-write | current | This parameter describes the NotSlave status of a PTP clock. 0: disable, 1: enable. |
| 1.3.6.1.2.1.10.4.50.13.1.22.1.46 | ColumnoptixPktPtpClockPortDmac | read-write | current | This parameter describes the destination MAC address of a PTP clock. mac011B19000000:01-1B-19-00-00-00,mac0180C200000E:01-80-C2-00-00-0E. |
| 1.3.6.1.2.1.10.4.50.13.1.23 | NodeoptixPktSTGPtpSrcChangeEventMember | |||
| 1.3.6.1.2.1.10.4.50.13.1.23.1 | ScalaroptixPktPtpSrcBid | accessible-for-notify | current | this parameter describes the main PTP bid before being switched |
| 1.3.6.1.2.1.10.4.50.13.1.23.2 | ScalaroptixPktPtpSrcSbid | accessible-for-notify | current | this parameter describes the main PTP subcard ID before being switched |
| 1.3.6.1.2.1.10.4.50.13.1.23.3 | ScalaroptixPktPtpSrcPid | accessible-for-notify | current | this parameter describes the main PTP port ID before being switched |
| 1.3.6.1.2.1.10.4.50.13.1.23.4 | ScalaroptixPktPtpSrcGrandmasterID1 | accessible-for-notify | current | this parameter describes the high bit of Grandmaster ID1 of main clock before being switched |
| 1.3.6.1.2.1.10.4.50.13.1.23.5 | ScalaroptixPktPtpSrcGrandmasterID2 | accessible-for-notify | current | this parameter describes the low bit of Grandmaster ID2 of main clock before being switched |
| 1.3.6.1.2.1.10.4.50.13.1.23.6 | ScalaroptixPktPtpDestBid | accessible-for-notify | current | this parameter describes the main PTP bid after being switched |
| 1.3.6.1.2.1.10.4.50.13.1.23.7 | ScalaroptixPktPtpDestSbid | accessible-for-notify | current | this parameter describes the main PTP subcard ID after being switched |
| 1.3.6.1.2.1.10.4.50.13.1.23.8 | ScalaroptixPktPtpDestPid | accessible-for-notify | current | this parameter describes the main PTP port ID after being switched |
| 1.3.6.1.2.1.10.4.50.13.1.23.9 | ScalaroptixPktPtprDestGrandmasterID1 | accessible-for-notify | current | this parameter describes the high bit of Grandmaster ID1 of main clock after being switched |
| 1.3.6.1.2.1.10.4.50.13.1.23.10 | ScalaroptixPktPtprDestGrandmasterID2 | accessible-for-notify | current | this parameter describes the low bit of Grandmaster ID2 of main clock after being switched |
| 1.3.6.1.2.1.10.4.50.13.1.23.11 | ScalaroptixPktPtpSwitchMode | accessible-for-notify | current | this parameter describes the style of switching. 1 auto, 2 man, 3 force |
| 1.3.6.1.2.1.10.4.50.13.1.24 | NodeoptixPktSTGPtpSrcChangeEvent | |||
| 1.3.6.1.2.1.10.4.50.13.1.24.1 | NotificationoptixPktSTGPtpSrcChange | current | this parameter describes the feature of 1588 clock switching | |
| 1.3.6.1.2.1.10.4.50.13.1.25 | TableoptixPktPtpClockPLTable | not-accessible | current | This table describes the configurations of the TC+OC port reference source priority list. |
| 1.3.6.1.2.1.10.4.50.13.1.25.1 | RowoptixPktPtpClockPLEntry | not-accessible | current | This entry describes the configurations of the TC+OC port reference source priority list. |
| 1.3.6.1.2.1.10.4.50.13.1.25.1.1 | ColumnoptixPktPtpClockPLNum | not-accessible | current | This object indicates the number of reference sources in the priority list. |
| 1.3.6.1.2.1.10.4.50.13.1.25.1.2 | ColumnoptixPktPtpClockPLRefClkIDHigh | read-write | current | This object indicates the high order of the port reference clock source number (with the highest priority). |
| 1.3.6.1.2.1.10.4.50.13.1.25.1.3 | ColumnoptixPktPtpClockPLRefClkIDLow | read-write | current | This object indicates the low order of the port reference clock source number (with the highest priority). |
| 1.3.6.1.2.1.10.4.50.13.1.25.1.4 | ColumnoptixPktPtpClockPLRecClkNo | not-accessible | current | This object indicates the receive clock source interface ID of a port. |
| 1.3.6.1.2.1.10.4.50.13.1.26 | NodeoptixPktSTGPtpPdvOverTHResEvent | |||
| 1.3.6.1.2.1.10.4.50.13.1.26.1 | NotificationoptixPktSTGPtpPdvOverTHRes | current | this parameter describes the event of 1588 ACR PDV over. | |
| 1.3.6.1.2.1.10.4.50.13.1.27 | TableoptixPktClockSrvInfoTable | not-accessible | current | This table describes the configurations of clock services. |
| 1.3.6.1.2.1.10.4.50.13.1.27.1 | RowoptixPktClockSrvInfoEntry | not-accessible | current | This entry describes the configurations of clock services. |
| 1.3.6.1.2.1.10.4.50.13.1.27.1.1 | ColumnoptixPktClockEsrvID | read-only | current | This object indicates the service index. |
| 1.3.6.1.2.1.10.4.50.13.1.27.1.2 | ColumnoptixPktClockEsrName | read-only | current | This object indicates the clock service name, which is a string of 64 characters. |
| 1.3.6.1.2.1.10.4.50.13.1.27.1.3 | ColumnoptixPktClockL2pTnl | read-only | current | This object indicates the flag for transparent transmission of L2 protocol packets. 0: No transparent transmission; 1: BPDU transparent transmission |
| 1.3.6.1.2.1.10.4.50.13.1.27.1.4 | ColumnoptixPktClockLgcIFnum | read-only | current | This object indicates the number of logical interfaces. |
| 1.3.6.1.2.1.10.4.50.13.1.27.1.5 | ColumnoptixPktClockTypeID | read-only | current | This object indicates the type of a logical interface (1: V-UNI; 2: V-NNI) and the list of logical interface IDs. |
| 1.3.6.1.2.1.10.4.50.13.2 | NodeoptixPktPtpClockGroupEx | |||
| 1.3.6.1.2.1.10.4.50.13.2.1 | ScalaroptixPktPtpProtFormat | read-write | current | this parameter describes the message format of 1588 protcol. 0 nmea, 1 ubx |
| 1.3.6.1.2.1.10.4.50.13.2.2 | ScalaroptixPktPtpLockState | read-only | current | This parameter describes the clock lock state of the 1588 protcol. |
| 1.3.6.1.2.1.10.4.50.13.2.3 | ScalaroptixPktPtpTimeLockState | read-only | current | This parameter describes the time lock state of the 1588 protcol. |
| 1.3.6.1.2.1.10.4.50.13.2.4 | ScalaroptixPktPtpProfile | read-write | current | This parameter describes the PTP clock protocol type of an NE. 0: IEEE-1588v2, 1: G8275-1. |
| 1.3.6.1.2.1.10.4.50.13.2.5 | ScalaroptixPktPtpClockState | read-only | current | This parameter describes the PTP clock tracking state of an NE. 0: Free-Run,1: Locked,2: Holdover-Out-Of-Specification. |
| 1.3.6.1.2.1.10.4.50.13.3 | NodeoptixPktPtpAcrUniGroup | |||
| 1.3.6.1.2.1.10.4.50.13.3.1 | TableoptixPktPtpAcrUniTable | not-accessible | current | This table describes the configuration message of IEEE 1588 ACR unicast. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1 | RowoptixPktPtpAcrUniEntry | not-accessible | current | This entry describes the configuration message of IEEE 1588 ACR unicast. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.1 | ColumnoptixPtpAcrUniId | not-accessible | current | This parameter describes the 1588acr unicast ID. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.2 | ColumnoptixPtpAcrUniNegEnable | read-write | current | This parameter describes the negotiation enable state. 0 disable, 1 enable |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.3 | ColumnoptixPtpAcrUniMasterIPAddr | read-write | current | This parameter describes the master IP address. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.4 | ColumnoptixPtpAcrUniMasterIPMask | read-write | current | This parameter describes the subnet mask corresponding to the master IP address. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.5 | ColumnoptixPtpAcrUniSrcPri | read-write | current | This parameter describes the clock source priority. Value range: 1 to 2. The default value is 1. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.6 | ColumnoptixPtpAcrUniMasterState | read-only | current | This parameter describes the status of the 1588acr unicast source. 1 up, 2 down |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.7 | ColumnoptixPtpAcrUniBoardId | read-write | current | This parameter describes the board slot ID. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.8 | ColumnoptixPtpAcrUniSubBoardId | read-write | current | This parameter describes the subboard ID. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.9 | ColumnoptixPtpAcrUniPortId | read-write | current | This parameter describes the port number. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.10 | ColumnoptixPtpAcrUniDMAC | read-write | current | This parameter describes the destination MAC address. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.11 | ColumnoptixPtpAcrUniTnlInLabel | read-write | current | This parameter describes the ingress lable of a tunnel. Value range: 16 to 1048575, 4294967295. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.12 | ColumnoptixPtpAcrUniTnlOutLabel | read-write | current | This parameter describes the egress label of a tunnel. Value range: 16 to 1048575, 4294967295. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.13 | ColumnoptixPtpAcrUniPwInLabel | read-write | current | This parameter describes the ingress label of a PW. Value range: 16 to 1048575, 4294967295. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.14 | ColumnoptixPtpAcrUniPwOutLabel | read-write | current | This parameter describes the egress label of a PW. Value range: 16 to 1048575, 4294967295. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.15 | ColumnoptixPtpAcrUniTnlExp | read-write | current | This parameter describes the tunnel EXP. Value range: 0 to 7. The default value is 6. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.16 | ColumnoptixPtpAcrUniTnlVlanId | read-write | current | This parameter describes the tunnel VLAN. Value range: 1 to 4094, 65535. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.17 | ColumnoptixPtpAcrUniTnlVlanPri | read-write | current | This parameter describes the tunnel VLAN priority. Value range: 0 to 7. The default value is 6. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.18 | ColumnoptixPtpAcrUniPwTpid | read-write | current | This parameter describes the PW TPID. Value range: 1536 to 65535. The default value is 34984. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.19 | ColumnoptixPtpAcrUniPwVlan | read-write | current | This parameter describes the PW VLAN. Value range: 1 to 4094, 65535. |
| 1.3.6.1.2.1.10.4.50.13.3.1.1.20 | ColumnoptixPtpAcrUniVrfName | read-write | current | This parameter describes the VRF name. |
| 1.3.6.1.2.1.10.4.50.13.3.2 | TableoptixPktPtpAcrUniPktTable | not-accessible | current | This table describes the configuration message of IEEE 1588 ACR unicast packets. |
| 1.3.6.1.2.1.10.4.50.13.3.2.1 | RowoptixPktPtpAcrUniPktEntry | not-accessible | current | This entry describes the configuration message of IEEE 1588 ACR unicast packets. |
| 1.3.6.1.2.1.10.4.50.13.3.2.1.1 | ColumnoptixPtpAcrUniPktType | not-accessible | current | This parameter describes the packet type. 1 sync, 2 announce, 3 delay |
| 1.3.6.1.2.1.10.4.50.13.3.2.1.2 | ColumnoptixPtpAcrUniDurationField | read-write | current | This parameter describes the duration field. Value range: 6 to 1000. The default value is 300. |
| 1.3.6.1.2.1.10.4.50.13.3.2.1.3 | ColumnoptixPtpAcrUniSendCycle | read-write | current | This parameter describes the send cycle. Value range: sync: 3 to 14, announce: 7 to 14, delay: 3 to 14 |
| 1.3.6.1.2.1.10.4.50.13.3.3 | TableoptixPktPtpAcrUniNegStatTable | not-accessible | current | This table describes the negotiation state of IEEE 1588 ACR unicast. |
| 1.3.6.1.2.1.10.4.50.13.3.3.1 | RowoptixPktPtpAcrUniNegStatEntry | not-accessible | current | This entry describes the negotiation state of IEEE 1588 ACR unicast. |
| 1.3.6.1.2.1.10.4.50.13.3.3.1.1 | ColumnoptixPtpAcrUniNegState | read-only | current | This parameter describes the negotiation state. 1 up, 2 down, 3 no-use |
| 1.3.6.1.2.1.10.4.50.13.4 | NodeoptixPktPtpAcrUniNeGroup | |||
| 1.3.6.1.2.1.10.4.50.13.4.1 | ScalaroptixPtpAcrUniDomain | read-write | current | This parameter describes the domain value. Value range: 4 to 23. The default value is 4. |
| 1.3.6.1.2.1.10.4.50.13.4.2 | ScalaroptixPtpAcrUniSlaveIPAddr | read-write | current | This parameter describes the IP address at the local end. |
| 1.3.6.1.2.1.10.4.50.13.4.3 | ScalaroptixPtpAcrUniSlaveIPMask | read-write | current | This parameter describes the subnet mask at the local end. |
| 1.3.6.1.2.1.10.4.50.13.4.4 | ScalaroptixPtpAcrUniOneTwoWay | read-write | current | This parameter describes the one-way or two-way synchronization mode. 1 one-way, 2 two-way |
| 1.3.6.1.2.1.10.4.50.13.4.5 | ScalaroptixPtpAcrUniAnnTimeout | read-write | current | This parameter describes the announce packet timeout period. Value range: 2 to 10. The default value is 3. |
| 1.3.6.1.2.1.10.4.50.13.4.6 | ScalaroptixPtpAcrUniDSCPPri | read-write | current | This parameter describes the DSCP priority. Value range: 0 to 63. The default value is 56. |
| 1.3.6.1.2.1.10.4.50.13.4.7 | ScalaroptixPtpAcrUniTrackSource | read-only | current | This parameter describes the track source. |
| 1.3.6.1.2.1.10.4.50.13.4.8 | ScalaroptixPtpAcrUniTrackState | read-only | current | This parameter describes the track state. 1 track, 2 keep, 3 free |
| 1.3.6.1.2.1.10.4.50.13.4.9 | ScalaroptixPtpAcrUniLockState | read-only | current | This parameter describes the lock state. 1 lock, 2 unlock |
| 1.3.6.1.2.1.10.4.50.13.4.10 | ScalaroptixPtpAcrUniCarryMode | read-write | current | This parameter describes the carry mode. 1 L3VPN, 2 VLAN, 3 QINQ, 4 L2VPN, 5 L3 |
| 1.3.6.1.2.1.10.4.50.13.4.11 | ScalaroptixPtpAcrUniUserVlanId | read-write | current | This parameter describes the user VLAN ID. Value range: 1 to 4094, 65535. |
| 1.3.6.1.2.1.10.4.50.13.4.12 | ScalaroptixPtpAcrUniUserVlanPri | read-write | current | This parameter describes the user VLAN priority. Value range: 0 to 7. The default value is 6. |
| 1.3.6.1.2.1.10.4.50.13.4.13 | ScalaroptixPtpAcrUniTpid | read-write | current | This parameter describes the TPID. Value range: 1536 to 65535. The default value is 34984. |
| 1.3.6.1.2.1.10.4.50.13.4.14 | ScalaroptixPtpAcrUniSVlanId | read-write | current | This parameter describes the SVLAN ID. Value range: 1 to 4094, 65535. |
| 1.3.6.1.2.1.10.4.50.13.4.15 | ScalaroptixPtpAcrUniSVlanPri | read-write | current | This parameter describes the SVLAN priority. Value range: 0 to 7. The default value is 6. |
| 1.3.6.1.2.1.10.4.50.13.4.16 | ScalaroptixPtpAcrUniPwCW | read-write | current | This parameter describes the control word. 1 not-use, 2 use |
| 1.3.6.1.2.1.10.4.50.13.4.17 | ScalaroptixPtpAcrUniPwType | read-write | current | This parameter describes the PW type. 4 ethtag, 5 ethraw |