OPTIX-PKT-QOS-POLICY-MIB
92 objects
This mib specifies the QOS service configuration information of device
Imported Objects
| OPTIX-OID-MIB | optixProvisionPtn |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.50.32 | IdentityoptixPktQosPolicy | This mib specifies the QOS service configuration information of device | ||
| 1.3.6.1.2.1.10.4.50.32.1 | NodeoptixPktQosPolicyGroup | |||
| 1.3.6.1.2.1.10.4.50.32.1.1 | TableoptixWRRTable | not-accessible | current | This table describes the basic QoS WRR scheduling configurations. |
| 1.3.6.1.2.1.10.4.50.32.1.1.1 | RowoptixWRREntry | not-accessible | current | This entry describes the basic QoS WRR scheduling configurations. |
| 1.3.6.1.2.1.10.4.50.32.1.1.1.1 | ColumnoptixWRRId | not-accessible | current | This object indicates the WRR scheduling ID of the QoS module. Value range for RTN equipment: 0 to 128. |
| 1.3.6.1.2.1.10.4.50.32.1.1.1.2 | ColumnoptixWRRCs7Weight | read-create | current | This object indicates the CS7 scheduling weight of the QoS module. Value range: 0 to 100. |
| 1.3.6.1.2.1.10.4.50.32.1.1.1.3 | ColumnoptixWRRCs6Weight | read-create | current | This object indicates the CS6 scheduling weight of the QoS module. Value range: 0 to 100. |
| 1.3.6.1.2.1.10.4.50.32.1.1.1.4 | ColumnoptixWRREfWeight | read-create | current | This object indicates the EF scheduling weight of the QoS module. Value range: 0 to 100. |
| 1.3.6.1.2.1.10.4.50.32.1.1.1.5 | ColumnoptixWRRAf4Weight | read-create | current | This object indicates the AF4 scheduling weight of the QoS module. Value range: 0 to 100. |
| 1.3.6.1.2.1.10.4.50.32.1.1.1.6 | ColumnoptixWRRAf3Weight | read-create | current | This object indicates the AF3 scheduling weight of the QoS module. Value range: 0 to 100. |
| 1.3.6.1.2.1.10.4.50.32.1.1.1.7 | ColumnoptixWRRAf2Weight | read-create | current | This object indicates the AF2 scheduling weight of the QoS module. Value range: 0 to 100. |
| 1.3.6.1.2.1.10.4.50.32.1.1.1.8 | ColumnoptixWRRAf1Weight | read-create | current | This object indicates the AF1 scheduling weight of the QoS module. Value range: 0 to 100. |
| 1.3.6.1.2.1.10.4.50.32.1.1.1.9 | ColumnoptixWRRBeWeight | read-create | current | This object indicates the BF scheduling weight of the QoS module. Value range: 0 to 100. |
| 1.3.6.1.2.1.10.4.50.32.1.1.1.10 | ColumnoptixWRRInfo | read-create | current | This object indicates the WRR scheduling information of the QoS module. |
| 1.3.6.1.2.1.10.4.50.32.1.1.1.255 | ColumnoptixWRRRowStatus | read-create | current | This object indicates the WRR scheduling row status of the QoS module. |
| 1.3.6.1.2.1.10.4.50.32.1.2 | TableoptixPolicyTable | not-accessible | current | This table describes the basic QoS policy configurations. |
| 1.3.6.1.2.1.10.4.50.32.1.2.1 | RowoptixPolicyEntry | not-accessible | current | This entry describes the basic QoS policy configurations. |
| 1.3.6.1.2.1.10.4.50.32.1.2.1.1 | ColumnoptixPolicyType | not-accessible | current | This object indicates the QoS policy type of the QoS module. 1: port, 2: vuniingress, 3: vuniegress, 4: pw, 5: atm, 6: qinq |
| 1.3.6.1.2.1.10.4.50.32.1.2.1.2 | ColumnoptixPolicyId | not-accessible | current | This object indicates the QoS policyvalue of the QoS module. Value range for ATM: 0 to 1024. Value range for PORT: 0 to 256. Value range for VUNIINGRESS: 1 to … |
| 1.3.6.1.2.1.10.4.50.32.1.2.1.3 | ColumnoptixPolicyClassifierShareFlag | read-only | current | This object indicates the flow classification instance flag. 1: disable, 2: enable, 255: none |
| 1.3.6.1.2.1.10.4.50.32.1.2.1.4 | ColumnoptixPolicyWfqId | read-only | current | This object indicates the WFQ scheduling ID of the QoS module. |
| 1.3.6.1.2.1.10.4.50.32.1.2.1.5 | ColumnoptixPolicyInfo | read-only | current | This object indicates the QoS policyinformation of the QoS module. |
| 1.3.6.1.2.1.10.4.50.32.1.2.1.6 | ColumnoptixPolicyIndex1 | read-only | current | This object indicates the policy index 1 of the QoS module. |
| 1.3.6.1.2.1.10.4.50.32.1.2.1.7 | ColumnoptixPolicyIndex2 | read-only | current | This object indicates the policy index 2 of the QoS module. |
| 1.3.6.1.2.1.10.4.50.32.1.2.1.8 | ColumnoptixPolicyIndex3 | read-only | current | This object indicates the policy index 3 of the QoS module. |
| 1.3.6.1.2.1.10.4.50.32.1.2.1.9 | ColumnoptixPolicyDirection | read-only | current | This object indicates the policy direction of the QoS module.1: ingress, 2: egress, 255: none, 0: all |
| 1.3.6.1.2.1.10.4.50.32.1.2.1.10 | ColumnoptixPolicyCs7Weight | read-only | current | This object indicates the CS7 scheduling weight of the QoS module. 1: sp, 2: wrr, 3: wfq, 4: drr, 255: none |
| 1.3.6.1.2.1.10.4.50.32.1.2.1.11 | ColumnoptixPolicyCs6Weight | read-only | current | This object indicates the CS6 scheduling weight of the QoS module. 1: sp, 2: wrr, 3: wfq, 4: drr, 255: none |
| 1.3.6.1.2.1.10.4.50.32.1.2.1.12 | ColumnoptixPolicyEfWeight | read-only | current | This object indicates the EF scheduling weight of the QoS module. 1: sp, 2: wrr, 3: wfq, 4: drr, 255: none |
| 1.3.6.1.2.1.10.4.50.32.1.2.1.13 | ColumnoptixPolicyAf4Weight | read-only | current | This object indicates the AF4 scheduling weight of the QoS module. 1: sp, 2: wrr, 3: wfq, 4: drr, 255: none |
| 1.3.6.1.2.1.10.4.50.32.1.2.1.14 | ColumnoptixPolicyAf3Weight | read-only | current | This object indicates the AF3 scheduling weight of the QoS module. 1: sp, 2: wrr, 3: wfq, 4: drr, 255: none |
| 1.3.6.1.2.1.10.4.50.32.1.2.1.15 | ColumnoptixPolicyAf2Weight | read-only | current | This object indicates the AF2 scheduling weight of the QoS module. 1: sp, 2: wrr, 3: wfq, 4: drr, 255: none |
| 1.3.6.1.2.1.10.4.50.32.1.2.1.16 | ColumnoptixPolicyAf1Weight | read-only | current | This object indicates the AF1 scheduling weight of the QoS module. 1: sp, 2: wrr, 3: wfq, 4: drr, 255: none |
| 1.3.6.1.2.1.10.4.50.32.1.2.1.17 | ColumnoptixPolicyBeWeight | read-only | current | This object indicates the BE scheduling weight of the QoS module. 1: sp, 2: wrr, 3: wfq, 4: drr, 255: none |
| 1.3.6.1.2.1.10.4.50.32.1.2.1.255 | ColumnoptixPolicyRowStatus | read-only | current | This object indicates the QoS row status of the QoS module. |
| 1.3.6.1.2.1.10.4.50.32.1.3 | TableoptixPolicyQueueTable | not-accessible | current | This table describes the basic flow classification configurations of the QoS policy . |
| 1.3.6.1.2.1.10.4.50.32.1.3.1 | RowoptixPolicyQueueEntry | not-accessible | current | This entry describes the basic flow classification configurations of the QoS policy . |
| 1.3.6.1.2.1.10.4.50.32.1.3.1.1 | ColumnoptixPolicyQueueType | not-accessible | current | This object indicates the policy queue type of the QoS module. |
| 1.3.6.1.2.1.10.4.50.32.1.3.1.2 | ColumnoptixPolicyQueueCir | read-create | current | This object indicates the policy queue CIR of the QoS module. Value range: MIN_ETH_CIR to MAX_ETH_CIR (unit: Kbit/s) For CS7, CS6, and EF, the value must be PI… |
| 1.3.6.1.2.1.10.4.50.32.1.3.1.3 | ColumnoptixPolicyQueueCbs | read-create | current | This object indicates the policy queue CBS of the QoS module. Value range: MIN_ETH_CBS to MAX_ETH_CBS (unit: byte). |
| 1.3.6.1.2.1.10.4.50.32.1.3.1.4 | ColumnoptixPolicyQueuePir | read-create | current | This object indicates the policy queue PIR of the QoS module. Value range: MIN_ETH_CIR to MAX_ETH_CIR (unit: Kbit/s) For CS7, CS6, and EF, the value must be PI… |
| 1.3.6.1.2.1.10.4.50.32.1.3.1.5 | ColumnoptixPolicyQueuePbs | read-create | current | This object indicates the policy queue PBS of the QoS module. Value range: MIN_ETH_PBS to MAX_ETH_PBS (unit: byte). |
| 1.3.6.1.2.1.10.4.50.32.1.3.1.6 | ColumnoptixPolicyQueueTaildrop | read-create | current | This object indicates the thresholdof droppingtail policies of the QoS module. Value range: 0 to 4095. The default value is 65535. |
| 1.3.6.1.2.1.10.4.50.32.1.3.1.7 | ColumnoptixPolicyQueueWredId | read-create | current | This object indicates the WRED ID of the QoS module. Value range for port: 0 to 8. Value range for service: 0 to 127. |
| 1.3.6.1.2.1.10.4.50.32.1.3.1.255 | ColumnoptixPolicyQueueRowStatus | read-create | current | This object indicates the QoS queue row status of the QoS module. |
| 1.3.6.1.2.1.10.4.50.32.1.4 | TableoptixAtmPolicyTable | not-accessible | current | This table describes the basicATM policy configurations. |
| 1.3.6.1.2.1.10.4.50.32.1.4.1 | RowoptixAtmPolicyEntry | not-accessible | current | Thisentry describes the basic ATM policy configurations. |
| 1.3.6.1.2.1.10.4.50.32.1.4.1.1 | ColumnoptixAtmPolicyCategory | read-create | current | This object indicates the ATM policy category. 1: ubr, 2: cbr, 3: rtvbr, 4: nrtvbr, 5: ubrplus, 6: portTrans, 0: all |
| 1.3.6.1.2.1.10.4.50.32.1.4.1.2 | ColumnoptixAtmPolicyTrafficType | read-create | current | This object indicates the ATM QoS traffic type. 1: nodscr, 2: noclpnoscr, 3: clpnotagnoscr, 4: clptagnoscr, 5: noclpscr, 6: clpnotagscr, 7: clptagscr, 8: clpno… |
| 1.3.6.1.2.1.10.4.50.32.1.4.1.3 | ColumnoptixAtmPolicyPara1 | read-create | current | This object indicates the first ATM QoS parameter. |
| 1.3.6.1.2.1.10.4.50.32.1.4.1.4 | ColumnoptixAtmPolicyPara2 | read-create | current | This object indicates the second ATM QoS parameter. |
| 1.3.6.1.2.1.10.4.50.32.1.4.1.5 | ColumnoptixAtmPolicyPara3 | read-create | current | This object indicates the third ATM QoS parameter. |
| 1.3.6.1.2.1.10.4.50.32.1.4.1.6 | ColumnoptixAtmPolicyPara4 | read-create | current | This object indicates the fourth ATM QoS parameter. |
| 1.3.6.1.2.1.10.4.50.32.1.4.1.7 | ColumnoptixAtmPolicyFrameDiscardFlag | read-create | current | This object indicates enable status of dropping ATM QoS frames. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.50.32.1.4.1.8 | ColumnoptixAtmPolicyUPCNPCFlag | read-create | current | This object indicates enable status ofATM QoS UPC/NPC. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.50.32.1.4.1.255 | ColumnoptixAtmPolicyRowStatus | read-create | current | This object indicates the ATM QoS row status. |
| 1.3.6.1.2.1.10.4.50.32.1.5 | TableoptixVUNIGroupTable | not-accessible | current | This table describes the VUNI Group of the QoS module. |
| 1.3.6.1.2.1.10.4.50.32.1.5.1 | RowoptixVUNIGroupEntry | not-accessible | current | This entry describes the VUNI Group of the QoS module. |
| 1.3.6.1.2.1.10.4.50.32.1.5.1.1 | ColumnoptixVUNIGroupId | not-accessible | current | This object indicates the VUNI Group ID of the QoS module. Value range: RTN 950: 0 to 128. RTN 905 1C: 0 to 1000. RTN 905: 0 to 1000. RTN 910: 0 to 1000. RTN 9… |
| 1.3.6.1.2.1.10.4.50.32.1.5.1.2 | ColumnoptixVUNIGroupType | read-create | current | This object indicates the type of the VUNI Group ID of the QoS module. 1: ingress, 2: egress, 255: none, 0: all |
| 1.3.6.1.2.1.10.4.50.32.1.5.1.3 | ColumnoptixVUNIGroupMembNum | read-create | current | This object indicates the number of the VUNI membersof the QoS module. Value range: RTN 950: 0 to 2000. RTN 905 1C: 0 to 2000. RTN 905: 0 to 2000. RTN 910: 0 t… |
| 1.3.6.1.2.1.10.4.50.32.1.5.1.4 | ColumnoptixVUNIGroupSrvId | read-create | current | This object indicates the operation ID of the VUNI Group of the QoS module. |
| 1.3.6.1.2.1.10.4.50.32.1.5.1.5 | ColumnoptixVUNIGroupVuniID | read-create | current | This object indicates the VUNI ID of the VUNI Group of the QoS module. |
| 1.3.6.1.2.1.10.4.50.32.1.5.1.6 | ColumnoptixVUNIGroupCir | read-create | current | This object indicates the CIR of the VUNI Group of the QoS module. Value range in the egress direction: RTN 950: 128 to 10000000. RTN 905 1C: 66000 to 10000000… |
| 1.3.6.1.2.1.10.4.50.32.1.5.1.7 | ColumnoptixVUNIGroupCbs | read-create | current | This object indicates the CBS of the VUNI Group of the QoS module. Value range in the egress direction: RTN 950: 64 to 512000. RTN 905 1C: 4294967295. RTN 905:… |
| 1.3.6.1.2.1.10.4.50.32.1.5.1.8 | ColumnoptixVUNIGroupPir | read-create | current | This object indicates the PIR of the VUNI Group of the QoS module. Value range in the egress direction: RTN 950: 128 to 10000000. RTN 905 1C: 66000 to 10000000… |
| 1.3.6.1.2.1.10.4.50.32.1.5.1.9 | ColumnoptixVUNIGroupPbs | read-create | current | This object indicates the PBS of the VUNI Group of the QoS module. Value range in the egress direction: RTN 950: 64 to 512000. RTN 905 1C: 64 to 512000. RTN 90… |
| 1.3.6.1.2.1.10.4.50.32.1.5.1.10 | ColumnoptixVUNIGroupStartCir | read-only | current | This object indicates the starting CIR of the VUNI Group of the QoS module. Value range in the egress direction: RTN 950: 128 to 10000000. RTN 905 1C: 66000 to… |
| 1.3.6.1.2.1.10.4.50.32.1.5.1.11 | ColumnoptixVUNIGroupStartPir | read-only | current | This object indicates the starting CBS of the VUNI Group t of the QoS module. Value range in the egress direction: RTN 950: 128 to 10000000. RTN 905 1C: 66000 … |
| 1.3.6.1.2.1.10.4.50.32.1.5.1.12 | ColumnoptixVUNIGroupState | read-create | current | This object indicates the real state of the VUNI Group of the QoS module. 1: created, 0: notcreate |
| 1.3.6.1.2.1.10.4.50.32.1.5.1.255 | ColumnoptixVUNIGroupRowStatus | read-create | current | This object indicates the row status of the VUNI Group of the QoS module. |
| 1.3.6.1.2.1.10.4.50.32.1.6 | TableoptixVUNIGroupMembTable | not-accessible | current | This table describes the Member of the VUNI Group. |
| 1.3.6.1.2.1.10.4.50.32.1.6.1 | RowoptixVUNIGroupMembEntry | not-accessible | current | This entry describes the Member of the VUNI Group. |
| 1.3.6.1.2.1.10.4.50.32.1.6.1.255 | ColumnoptixVUNIRowStatus | read-create | current | This object indicates the rowstatusthe Member of the VUNI Group. |
| 1.3.6.1.2.1.10.4.50.32.1.7 | TableoptixEXTPolicyTable | not-accessible | current | This table describes the basic QoS policy configurations. |
| 1.3.6.1.2.1.10.4.50.32.1.7.1 | RowoptixEXTPolicyEntry | not-accessible | current | This entry describes the basic QoS policy configurations. |
| 1.3.6.1.2.1.10.4.50.32.1.7.1.1 | ColumnoptixEXTPolicyType | not-accessible | current | This object indicates the QoS policy type of the QoS module. 1: port, 2: vuniingress, 3: vuniegress, 4: pw, 5: atm, 6: qinq |
| 1.3.6.1.2.1.10.4.50.32.1.7.1.2 | ColumnoptixEXTPolicyId | not-accessible | current | This object indicates the QoS policy value of the QoS module. |
| 1.3.6.1.2.1.10.4.50.32.1.7.1.3 | ColumnoptixEXTPolicyClassifierShareFlag | read-only | current | This object indicates the flow classification instance flag. 1: disable, 2: enable, 255: none |
| 1.3.6.1.2.1.10.4.50.32.1.7.1.4 | ColumnoptixEXTPolicyWfqId | read-only | current | This object indicates the WFQ scheduling ID of the QoS module. Value range: 0 to 36. |
| 1.3.6.1.2.1.10.4.50.32.1.7.1.5 | ColumnoptixEXTPolicyInfo | read-create | current | This object indicates the QoS policyinformation of the QoS module. |
| 1.3.6.1.2.1.10.4.50.32.1.7.1.6 | ColumnoptixEXTPolicyDirection | read-only | current | This object indicates the policy direction of the QoS module. |
| 1.3.6.1.2.1.10.4.50.32.1.7.1.7 | ColumnoptixEXTPolicyCs7Weight | read-create | current | This object indicates the CS7 scheduling weight of the QoS module. 1: sp, 2: wrr, 3: wfq, 4: drr, 255: none |
| 1.3.6.1.2.1.10.4.50.32.1.7.1.8 | ColumnoptixEXTPolicyCs6Weight | read-create | current | This object indicates the CS6 scheduling weight of the QoS module. 1: sp, 2: wrr, 3: wfq, 4: drr, 255: none |
| 1.3.6.1.2.1.10.4.50.32.1.7.1.9 | ColumnoptixEXTPolicyEfWeight | read-create | current | This object indicates theEF scheduling weight of the QoS module. 1: sp, 2: wrr, 3: wfq, 4: drr, 255: none |
| 1.3.6.1.2.1.10.4.50.32.1.7.1.10 | ColumnoptixEXTPolicyAf4Weight | read-create | current | This object indicates theAF4 scheduling weight of the QoS module. 1: sp, 2: wrr, 3: wfq, 4: drr, 255: none |
| 1.3.6.1.2.1.10.4.50.32.1.7.1.11 | ColumnoptixEXTPolicyAf3Weight | read-create | current | This object indicates the AF3 scheduling weight of the QoS module. 1: sp, 2: wrr, 3: wfq, 4: drr, 255: none |
| 1.3.6.1.2.1.10.4.50.32.1.7.1.12 | ColumnoptixEXTPolicyAf2Weight | read-create | current | This object indicates the AF2 scheduling weight of the QoS module. 1: sp, 2: wrr, 3: wfq, 4: drr, 255: none |
| 1.3.6.1.2.1.10.4.50.32.1.7.1.13 | ColumnoptixEXTPolicyAf1Weight | read-create | current | This object indicates the AF1 scheduling weight of the QoS module. 1: sp, 2: wrr, 3: wfq, 4: drr, 255: none |
| 1.3.6.1.2.1.10.4.50.32.1.7.1.14 | ColumnoptixEXTPolicyBeWeight | read-create | current | This object indicates the BE scheduling weight of the QoS module. 1: sp, 2: wrr, 3: wfq, 4: drr, 255: none |
| 1.3.6.1.2.1.10.4.50.32.1.7.1.15 | ColumnoptixEXTPolicyWrrId | read-create | current | This object indicates the WRR scheduling ID of the QoS module. Value range for port: 0 to 8. Value range for service: 0 to 127. |
| 1.3.6.1.2.1.10.4.50.32.1.7.1.255 | ColumnoptixEXTPolicyRowStatus | read-create | current | This object indicates theQoS row status of the QoS module. |